2009-Feb-22 00:10:59 BEGIN executive: CIMA executive starting ... 2009-Feb-22 00:10:59 NOTE executive: STARTING NEW CIMA SESSION 2009-Feb-22 00:10:59 INFO1 executive: Using CIMA version 3.1.03 'smart' from 2009-01-20 13:50 2009-Feb-22 00:10:59 INFO4 executive: This is an ON-LINE session 2009-Feb-22 00:10:59 INFO4 executive: This is a REMOTE session 2009-Feb-22 00:10:59 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Feb-22 00:10:59 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Ann Martin' 2009-Feb-22 00:10:59 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090222' 2009-Feb-22 00:11:00 LOG2 log_preferences: Currently applied preferences: 2009-Feb-22 00:11:00 LOG2 log_preferences: prefs(dailylog) = daily 2009-Feb-22 00:11:00 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Feb-22 00:11:00 LOG2 log_preferences: prefs(datawindow) = open 2009-Feb-22 00:11:00 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Feb-22 00:11:00 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Feb-22 00:11:00 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Feb-22 00:11:00 LOG2 log_preferences: prefs(logcolours) = full 2009-Feb-22 00:11:00 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Feb-22 00:11:00 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Feb-22 00:11:00 LOG2 log_preferences: prefs(displayformat) = long 2009-Feb-22 00:11:00 LOG2 log_preferences: prefs(logformat) = new 2009-Feb-22 00:11:00 LOG2 log_preferences: prefs(fontsize) = 3 2009-Feb-22 00:11:00 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Feb-22 00:11:00 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Feb-22 00:11:00 ALERT executive: CIMA executive ready 2009-Feb-22 00:11:03 NOTE frontend: CIMA frontend ready 2009-Feb-22 00:11:06 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:11:06 LOG4 got_cormsg: From DATATAKING: setup 2009-Feb-22 00:11:06 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Feb-22 00:11:06 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Feb-22 00:11:06 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Feb-22 00:11:06 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Feb-22 00:11:06 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Feb-22 00:11:06 NOTE select_receiver: Starting to select receiver ALFA 2009-Feb-22 00:11:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Feb-22 00:11:06 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Feb-22 00:11:06 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Feb-22 00:11:06 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Feb-22 00:11:06 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Feb-22 00:11:06 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Feb-22 00:11:06 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Feb-22 00:11:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-22 00:11:06 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Feb-22 00:11:06 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Feb-22 00:11:11 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Feb-22 00:11:11 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Feb-22 00:11:11 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Feb-22 00:11:11 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Feb-22 00:11:11 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Feb-22 00:11:11 NOTE restart_wapp: Restarting all WAPPs 2009-Feb-22 00:11:11 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Feb-22 00:11:11 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Feb-22 00:11:11 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Feb-22 00:11:11 LOG3 exec_msg: Closing socket 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2009-Feb-22 00:11:14 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Feb-22 00:11:14 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: 2009-Feb-22 00:11:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:11:14 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Feb-22 00:11:14 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Feb-22 00:11:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:11:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:11:46 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Feb-22 00:11:46 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Feb-22 00:11:46 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Feb-22 00:11:46 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Feb-22 00:11:46 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Feb-22 00:11:46 NOTE restart_wapp: Restarting all WAPPs 2009-Feb-22 00:11:46 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Feb-22 00:11:46 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Feb-22 00:11:46 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Feb-22 00:11:46 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Feb-22 00:11:46 LOG3 exec_msg: Closing socket 2009-Feb-22 00:11:46 LOG3 exec_msg: Closing socket 2009-Feb-22 00:11:49 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Feb-22 00:11:49 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Feb-22 00:11:49 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Feb-22 00:11:49 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Feb-22 00:12:05 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360_2009.conf' 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Feb-22 00:12:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Feb-22 00:12:07 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Feb-22 00:12:07 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Feb-22 00:12:07 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Feb-22 00:12:07 LOG5 begin_task: Level: (1) ID = <10004> Status = 0 0 0 0 ok 2009-Feb-22 00:12:07 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Feb-22 00:12:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Feb-22 00:12:07 INFO1 config_iflo: Selecting receiver ALFA 2009-Feb-22 00:12:07 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Feb-22 00:12:07 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Feb-22 00:12:07 START begin_task: Starting task 'selecting receiver ALFA' 2009-Feb-22 00:12:07 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2009-Feb-22 00:12:07 NOTE select_receiver: Starting to select receiver ALFA 2009-Feb-22 00:12:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Feb-22 00:12:07 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Feb-22 00:12:07 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Feb-22 00:12:07 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Feb-22 00:12:07 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Feb-22 00:12:07 LOG5 finish_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2009-Feb-22 00:12:07 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Feb-22 00:12:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 00:12:07 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Feb-22 00:12:07 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2009-Feb-22 00:12:08 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Feb-22 00:12:08 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2009-Feb-22 00:12:08 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Feb-22 00:12:08 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2009-Feb-22 00:12:08 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Feb-22 00:12:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Feb-22 00:12:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 00:12:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-22 00:12:08 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 00:12:08 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Feb-22 00:12:08 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 00:12:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 00:12:08 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Feb-22 00:12:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 00:12:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Feb-22 00:12:08 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Feb-22 00:12:08 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Feb-22 00:12:08 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Feb-22 00:12:08 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Feb-22 00:12:08 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Feb-22 00:12:08 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Feb-22 00:12:08 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Feb-22 00:12:08 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Feb-22 00:12:08 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Feb-22 00:12:08 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Feb-22 00:12:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Feb-22 00:12:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:12:08 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Feb-22 00:12:08 LOG5 begin_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Feb-22 00:12:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:12:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:23 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-22 00:12:23 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Feb-22 00:12:23 LOG5 end_task: Level: (2) ID = <10008> Status = 0 0 0 0 ok 2009-Feb-22 00:12:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Feb-22 00:12:23 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Feb-22 00:12:23 LOG5 finish_task: Level: (1) ID = <10004> Status = 0 0 0 0 ok 2009-Feb-22 00:12:23 DONE finish_task: DONE finished configuration: IF/LO path 2009-Feb-22 00:12:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-22 00:12:24 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Feb-22 00:12:24 LOG5 end_task: Level: (1) ID = <10004> Status = 0 0 0 0 ok 2009-Feb-22 00:12:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Feb-22 00:12:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Feb-22 00:12:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Feb-22 00:12:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Feb-22 00:12:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Feb-22 00:12:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Feb-22 00:12:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Feb-22 00:12:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Feb-22 00:12:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Feb-22 00:12:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Feb-22 00:12:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Feb-22 00:12:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Feb-22 00:12:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Feb-22 00:12:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Feb-22 00:12:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Feb-22 00:12:24 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Feb-22 00:12:24 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Feb-22 00:12:24 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Feb-22 00:12:24 LOG5 begin_task: Level: (1) ID = <10009> Status = 0 0 0 0 ok 2009-Feb-22 00:12:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Feb-22 00:12:24 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Feb-22 00:12:24 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Feb-22 00:12:24 START begin_task: Starting task 'selecting calibration port' 2009-Feb-22 00:12:24 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2009-Feb-22 00:12:24 LOG3 vw_send: To DATATAKING: calport 3 2009-Feb-22 00:12:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Feb-22 00:12:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:12:24 START begin_task: Starting task 'waiting on calport' 2009-Feb-22 00:12:24 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2009-Feb-22 00:12:24 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Feb-22 00:12:24 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Feb-22 00:12:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:12:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:25 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-22 00:12:25 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Feb-22 00:12:25 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2009-Feb-22 00:12:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Feb-22 00:12:25 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Feb-22 00:12:25 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2009-Feb-22 00:12:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-22 00:12:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-22 00:12:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 00:12:25 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2009-Feb-22 00:12:25 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 00:12:25 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-22 00:12:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 00:12:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 00:12:25 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2009-Feb-22 00:12:25 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Feb-22 00:12:25 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Feb-22 00:12:25 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Feb-22 00:12:25 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Feb-22 00:12:25 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Feb-22 00:12:25 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Feb-22 00:12:25 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Feb-22 00:12:25 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Feb-22 00:12:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Feb-22 00:12:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Feb-22 00:12:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Feb-22 00:12:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Feb-22 00:12:25 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Feb-22 00:12:25 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Feb-22 00:12:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 00:12:25 LOG5 begin_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2009-Feb-22 00:12:25 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 00:12:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-22 00:12:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 00:12:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 00:12:25 LOG5 end_task: Level: (2) ID = <10013> Status = 0 0 0 0 ok 2009-Feb-22 00:12:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Feb-22 00:12:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Feb-22 00:12:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Feb-22 00:12:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Feb-22 00:12:25 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Feb-22 00:12:25 LOG5 finish_task: Level: (1) ID = <10009> Status = 0 0 0 0 ok 2009-Feb-22 00:12:25 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Feb-22 00:12:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-22 00:12:25 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Feb-22 00:12:25 LOG5 end_task: Level: (1) ID = <10009> Status = 0 0 0 0 ok 2009-Feb-22 00:12:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Feb-22 00:12:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Feb-22 00:12:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Feb-22 00:12:26 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Feb-22 00:12:26 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Feb-22 00:12:26 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Feb-22 00:12:26 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2009-Feb-22 00:12:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Feb-22 00:12:26 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Feb-22 00:12:26 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Feb-22 00:12:26 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Feb-22 00:12:26 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2009-Feb-22 00:12:26 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Feb-22 00:12:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-22 00:12:26 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Feb-22 00:12:26 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2009-Feb-22 00:12:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Feb-22 00:12:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20090222.a2010.0000.fits 2009-Feb-22 00:12:26 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090222.a2010.0000.fits} 2009-Feb-22 00:12:27 NOTE CIMA-load_config_file: Configuration file 'a2010_az360_2009.conf' applied. 2009-Feb-22 00:12:29 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Feb-22 00:12:29 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Feb-22 00:12:48 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Feb-22 00:12:48 LOG4 exec_msg: From OBSERVER: track_new_source drift0p1 095500.0 -000718 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Feb-22 00:12:48 LOG1 track_new_source: Calling 'track_new_source drift0p1 095500.0 -000718 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Feb-22 00:12:48 BEGIN begin_task: Starting task 'selecting new source' 2009-Feb-22 00:12:48 LOG5 begin_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2009-Feb-22 00:12:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift0p1} INFO {Selecting source 'drift0p1' ...} 2009-Feb-22 00:12:48 LOG3 track_source: Calling 'track_source drift0p1 095500.0 -000718 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Feb-22 00:12:48 START begin_task: Starting task 'sending tracking commands' 2009-Feb-22 00:12:48 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Feb-22 00:12:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift0p1} INFO {Slewing to source 'drift0p1' ...} 2009-Feb-22 00:12:48 INFO1 track_source: Starting to track drift0p1 2009-Feb-22 00:12:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift0p1" 2009-Feb-22 00:12:48 LOG3 vw_send: To DATATAKING: set ra 095500.0 2009-Feb-22 00:12:48 LOG3 vw_send: To DATATAKING: set dec -000718 2009-Feb-22 00:12:48 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Feb-22 00:12:48 LOG3 vw_send: To DATATAKING: pnt tr 095500.0 -000718 -CJ 2009-Feb-22 00:12:48 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Feb-22 00:12:48 STOP finish_task: Finishing task 'sending tracking commands' 2009-Feb-22 00:12:48 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Feb-22 00:12:48 INFO2 finish_task: DONE finished sending: tracking commands 2009-Feb-22 00:12:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 00:12:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Feb-22 00:12:48 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Feb-22 00:12:48 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Feb-22 00:12:48 START begin_task: Starting task 'applying pointing corrections' 2009-Feb-22 00:12:48 LOG5 begin_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2009-Feb-22 00:12:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Feb-22 00:12:48 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Feb-22 00:12:48 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Feb-22 00:12:48 LOG5 finish_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2009-Feb-22 00:12:48 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Feb-22 00:12:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 00:12:48 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Feb-22 00:12:48 LOG5 end_task: Level: (2) ID = <10017> Status = 0 0 0 0 ok 2009-Feb-22 00:12:48 STOP finish_task: Finishing task 'selecting new source' 2009-Feb-22 00:12:48 LOG5 finish_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2009-Feb-22 00:12:48 DONE finish_task: DONE finished selecting: new source 2009-Feb-22 00:12:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-22 00:12:48 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Feb-22 00:12:48 LOG5 end_task: Level: (1) ID = <10015> Status = 0 0 0 0 ok 2009-Feb-22 00:12:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift0p1" 2009-Feb-22 00:12:48 LOG4 got_cormsg: From DATATAKING: set ra 095500.0 2009-Feb-22 00:12:48 LOG4 got_cormsg: From DATATAKING: set dec -000718 2009-Feb-22 00:12:48 LOG4 got_cormsg: From DATATAKING: vw% 095500.0 2009-Feb-22 00:12:48 LOG4 got_cormsg: From DATATAKING: vw% -000718 2009-Feb-22 00:12:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Feb-22 00:12:48 LOG4 got_cormsg: From DATATAKING: pnt tr 095500.0 -000718 -CJ 2009-Feb-22 00:12:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Feb-22 00:12:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Feb-22 00:12:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:12:48 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Feb-22 00:12:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:14:20 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Feb-22 00:14:20 LOG4 exec_msg: From OBSERVER: track_new_source drift0p1 095700.0 -000718 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Feb-22 00:14:20 LOG1 track_new_source: Calling 'track_new_source drift0p1 095700.0 -000718 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Feb-22 00:14:20 BEGIN begin_task: Starting task 'selecting new source' 2009-Feb-22 00:14:21 LOG5 begin_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2009-Feb-22 00:14:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift0p1} INFO {Selecting source 'drift0p1' ...} 2009-Feb-22 00:14:21 LOG3 track_source: Calling 'track_source drift0p1 095700.0 -000718 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Feb-22 00:14:21 START begin_task: Starting task 'sending tracking commands' 2009-Feb-22 00:14:21 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2009-Feb-22 00:14:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift0p1} INFO {Slewing to source 'drift0p1' ...} 2009-Feb-22 00:14:21 INFO1 track_source: Starting to track drift0p1 2009-Feb-22 00:14:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift0p1" 2009-Feb-22 00:14:21 LOG3 vw_send: To DATATAKING: set ra 095700.0 2009-Feb-22 00:14:21 LOG3 vw_send: To DATATAKING: set dec -000718 2009-Feb-22 00:14:21 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Feb-22 00:14:21 LOG3 vw_send: To DATATAKING: pnt tr 095700.0 -000718 -CJ 2009-Feb-22 00:14:21 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Feb-22 00:14:21 STOP finish_task: Finishing task 'sending tracking commands' 2009-Feb-22 00:14:21 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2009-Feb-22 00:14:21 INFO2 finish_task: DONE finished sending: tracking commands 2009-Feb-22 00:14:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 00:14:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Feb-22 00:14:21 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2009-Feb-22 00:14:21 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Feb-22 00:14:21 START begin_task: Starting task 'applying pointing corrections' 2009-Feb-22 00:14:21 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Feb-22 00:14:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Feb-22 00:14:21 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Feb-22 00:14:21 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Feb-22 00:14:21 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Feb-22 00:14:21 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Feb-22 00:14:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 00:14:21 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Feb-22 00:14:21 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Feb-22 00:14:21 STOP finish_task: Finishing task 'selecting new source' 2009-Feb-22 00:14:21 LOG5 finish_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2009-Feb-22 00:14:21 DONE finish_task: DONE finished selecting: new source 2009-Feb-22 00:14:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-22 00:14:21 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Feb-22 00:14:21 LOG5 end_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2009-Feb-22 00:14:21 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift0p1" 2009-Feb-22 00:14:21 LOG4 got_cormsg: From DATATAKING: set ra 095700.0 2009-Feb-22 00:14:21 LOG4 got_cormsg: From DATATAKING: set dec -000718 2009-Feb-22 00:14:21 LOG4 got_cormsg: From DATATAKING: vw% 095700.0 2009-Feb-22 00:14:21 LOG4 got_cormsg: From DATATAKING: vw% -000718 2009-Feb-22 00:14:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:14:21 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Feb-22 00:14:21 LOG4 got_cormsg: From DATATAKING: pnt tr 095700.0 -000718 -CJ 2009-Feb-22 00:14:21 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Feb-22 00:14:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:14:21 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Feb-22 00:14:21 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Feb-22 00:14:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:15:36 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Feb-22 00:15:36 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Feb-22 00:15:36 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Feb-22 00:15:36 LOG5 begin_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2009-Feb-22 00:15:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Feb-22 00:15:36 INFO2 adjust_power: Starting to adjust WAPP power 2009-Feb-22 00:15:36 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Feb-22 00:15:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Feb-22 00:15:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:15:36 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Feb-22 00:15:36 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-Feb-22 00:15:36 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Feb-22 00:15:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:15:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:15:39 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-22 00:15:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Feb-22 00:15:39 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-Feb-22 00:15:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Feb-22 00:15:39 START begin_task: Starting task 'adjusting WAPP power' 2009-Feb-22 00:15:39 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2009-Feb-22 00:15:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Feb-22 00:15:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-22 00:15:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-22 00:15:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-22 00:15:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-22 00:15:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Feb-22 00:15:39 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-Feb-22 00:15:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Feb-22 00:15:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:15:39 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 7 dB 2009-Feb-22 00:15:39 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 2 dB --- beam 5: 6 4 dB 2009-Feb-22 00:15:39 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 7 5 dB --- beam 3: 4 3 dB 2009-Feb-22 00:15:39 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Feb-22 00:15:39 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Feb-22 00:15:39 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Feb-22 00:15:39 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2009-Feb-22 00:15:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.893 1.044 ALFA beam 1: 0.998 0.983 2009-Feb-22 00:15:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.924 0.887 ALFA beam 3: 1.017 1.038 2009-Feb-22 00:15:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.061 0.899 ALFA beam 5: 0.920 0.995 2009-Feb-22 00:15:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.059 0.107 ALFA beam 7: 0.937 0.116 2009-Feb-22 00:15:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Feb-22 00:15:39 LOG5 finish_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2009-Feb-22 00:15:39 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Feb-22 00:15:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 00:15:39 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Feb-22 00:15:39 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2009-Feb-22 00:15:39 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Feb-22 00:15:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Feb-22 00:15:39 LOG5 finish_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2009-Feb-22 00:15:39 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Feb-22 00:15:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Feb-22 00:15:40 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Feb-22 00:15:40 LOG5 end_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2009-Feb-22 00:15:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Feb-22 00:15:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.893 1.044 0.998 0.983 2009-Feb-22 00:15:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 0.887 1.017 1.038 2009-Feb-22 00:15:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 0.899 0.920 0.995 2009-Feb-22 00:15:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.107 0.937 0.116 2009-Feb-22 00:15:43 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Feb-22 00:15:43 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift0p1 095700.0 -000718 J 0 Topocentric velocity(optical) 2009-Feb-22 00:15:43 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift0p1 095700.0 -000718 J 0 Topocentric velocity(optical)' 2009-Feb-22 00:15:43 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Feb-22 00:15:43 LOG5 begin_task: Level: (1) ID = <10025> Status = 0 0 0 0 ok 2009-Feb-22 00:15:43 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift0p1' 2009-Feb-22 00:15:43 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Feb-22 00:15:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift0p1} 2009-Feb-22 00:15:43 INFO5 fixed_driftmap: Start: year = 2009.1451359735847 RA = 09:57:30.3 Dec = -00:10:04.9 2009-Feb-22 00:15:43 NOTE fixed_driftmap: Setting ZA to 18:31:18.6 ... 2009-Feb-22 00:15:43 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 18.52 2009-Feb-22 00:15:43 LOG3 track_source: Calling 'track_source drift0p1 360.0 18.5218464923 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Feb-22 00:15:43 START begin_task: Starting task 'sending tracking commands' 2009-Feb-22 00:15:43 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2009-Feb-22 00:15:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift0p1} INFO {Slewing to source 'drift0p1' ...} 2009-Feb-22 00:15:43 INFO1 track_source: Starting to track drift0p1 2009-Feb-22 00:15:43 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift0p1" 2009-Feb-22 00:15:43 LOG3 vw_send: To DATATAKING: set ra 360.0 2009-Feb-22 00:15:43 LOG3 vw_send: To DATATAKING: set dec 18.5218464923 2009-Feb-22 00:15:43 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Feb-22 00:15:43 LOG3 vw_send: To DATATAKING: pnt tr 360.0 18.5218464923 -CF 2009-Feb-22 00:15:43 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Feb-22 00:15:43 STOP finish_task: Finishing task 'sending tracking commands' 2009-Feb-22 00:15:43 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2009-Feb-22 00:15:43 INFO2 finish_task: DONE finished sending: tracking commands 2009-Feb-22 00:15:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 00:15:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Feb-22 00:15:43 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2009-Feb-22 00:15:43 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Feb-22 00:15:43 LOG5 begin_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2009-Feb-22 00:15:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Feb-22 00:15:43 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Feb-22 00:15:43 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Feb-22 00:15:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Feb-22 00:15:44 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Feb-22 00:15:44 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2009-Feb-22 00:15:44 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift0p1" 2009-Feb-22 00:15:44 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2009-Feb-22 00:15:44 LOG4 got_cormsg: From DATATAKING: set dec 18.5218464923 2009-Feb-22 00:15:44 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2009-Feb-22 00:15:44 LOG4 got_cormsg: From DATATAKING: vw% 18.5218464923 2009-Feb-22 00:15:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:15:44 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Feb-22 00:15:44 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 18.5218464923 -CF 2009-Feb-22 00:15:44 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Feb-22 00:15:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Feb-22 00:15:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:15:44 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Feb-22 00:15:44 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Feb-22 00:15:44 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Feb-22 00:15:44 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2009-Feb-22 00:15:44 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Feb-22 00:15:44 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Feb-22 00:15:44 LOG5 finish_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2009-Feb-22 00:15:44 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Feb-22 00:15:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 00:15:45 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Feb-22 00:15:45 LOG5 end_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2009-Feb-22 00:15:45 START begin_task: Starting task 'waiting on telescope' 2009-Feb-22 00:15:45 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2009-Feb-22 00:15:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Feb-22 00:15:45 LOG3 waittrk: Start waittrk 5 2009-Feb-22 00:15:45 START begin_task: Starting task 'waiting on telescope movement' 2009-Feb-22 00:15:45 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2009-Feb-22 00:15:50 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Feb-22 00:15:50 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2009-Feb-22 00:15:50 START begin_task: Starting task 'waiting on telescope on source' 2009-Feb-22 00:15:50 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Feb-22 00:15:55 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Feb-22 00:15:55 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Feb-22 00:15:55 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Feb-22 00:15:55 INFO2 waittrk: Now tracking drift0p1 2009-Feb-22 00:15:55 LOG4 waittrk: Current telescope position: Az = 359.64 ZA = 18.51 2009-Feb-22 00:15:55 STOP finish_task: Finishing task 'waiting on telescope' 2009-Feb-22 00:15:55 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2009-Feb-22 00:15:55 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Feb-22 00:15:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 00:15:55 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Feb-22 00:15:55 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2009-Feb-22 00:15:55 START begin_task: Starting task 'selecting calibration type' 2009-Feb-22 00:15:55 LOG5 begin_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2009-Feb-22 00:15:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Feb-22 00:15:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Feb-22 00:15:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:15:55 START begin_task: Starting task 'waiting on setcal' 2009-Feb-22 00:15:55 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Feb-22 00:15:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Feb-22 00:15:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:15:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:15:55 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-22 00:15:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Feb-22 00:15:55 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Feb-22 00:15:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Feb-22 00:15:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 00:15:55 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Feb-22 00:15:55 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 00:15:55 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2009-Feb-22 00:15:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:15:55 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 00:15:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 00:15:55 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2009-Feb-22 00:15:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 00:15:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Feb-22 00:15:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 00:15:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-22 00:15:55 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 00:15:55 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Feb-22 00:15:55 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 00:15:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 00:15:55 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Feb-22 00:15:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 00:15:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-22 00:15:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Feb-22 00:15:55 LOG5 end_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2009-Feb-22 00:15:55 LOG5 dopset_later: Calling 'dopset_later 0' 2009-Feb-22 00:15:55 INFO3 dopset_later: Setting Doppler correction now 2009-Feb-22 00:15:55 LOG5 antvel: Calling 'antvel 360.000000 18.521846 F Topocentric 0' 2009-Feb-22 00:15:55 LOG2 antvel: Transforming current Az = 360.00 ZA = 18.52 to apparent RA = 09:57:43.9 Dec = -00:10:04.9 2009-Feb-22 00:15:55 LOG2 antvel: Parameters to Doppler: Topocentric 15355 2009 53 0.0 2009-Feb-22 00:15:55 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Feb-22 00:15:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Feb-22 00:15:56 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Feb-22 00:15:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Feb-22 00:15:56 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Feb-22 00:15:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Feb-22 00:15:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-22 00:15:56 START begin_task: Starting task 'adjusting WAPP power' 2009-Feb-22 00:15:56 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2009-Feb-22 00:15:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Feb-22 00:15:56 INFO2 adjust_power: Starting to adjust WAPP power 2009-Feb-22 00:15:56 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Feb-22 00:15:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Feb-22 00:15:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:15:56 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Feb-22 00:15:56 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Feb-22 00:15:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Feb-22 00:15:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Feb-22 00:15:56 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Feb-22 00:15:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:15:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:15:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:15:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:15:56 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-22 00:15:56 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Feb-22 00:15:56 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Feb-22 00:15:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Feb-22 00:15:56 START begin_task: Starting task 'adjusting WAPP power' 2009-Feb-22 00:15:56 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2009-Feb-22 00:15:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Feb-22 00:15:56 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-22 00:15:56 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-22 00:15:56 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-22 00:15:56 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Feb-22 00:15:56 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Feb-22 00:15:56 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2009-Feb-22 00:15:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Feb-22 00:15:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:15:56 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 7 7 dB 2009-Feb-22 00:15:56 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 2 dB --- beam 5: 6 4 dB 2009-Feb-22 00:15:56 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 7 4 dB --- beam 3: 4 3 dB 2009-Feb-22 00:15:56 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Feb-22 00:15:57 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Feb-22 00:15:57 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Feb-22 00:15:57 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2009-Feb-22 00:15:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.909 1.044 ALFA beam 1: 0.998 0.984 2009-Feb-22 00:15:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.930 1.136 ALFA beam 3: 1.022 1.060 2009-Feb-22 00:15:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.079 0.919 ALFA beam 5: 0.923 0.998 2009-Feb-22 00:15:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.079 0.109 ALFA beam 7: 0.950 0.119 2009-Feb-22 00:15:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Feb-22 00:15:57 LOG5 finish_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2009-Feb-22 00:15:57 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Feb-22 00:15:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 00:15:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Feb-22 00:15:57 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2009-Feb-22 00:15:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Feb-22 00:15:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Feb-22 00:15:57 LOG5 finish_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2009-Feb-22 00:15:57 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Feb-22 00:15:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 00:15:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Feb-22 00:15:57 LOG5 end_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2009-Feb-22 00:15:57 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:57:30.3 LST = 09:57:44.9 diff = -14.6 secs 2009-Feb-22 00:15:57 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2009-Feb-22 00:15:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Feb-22 00:15:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Feb-22 00:15:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Feb-22 00:15:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Feb-22 00:15:57 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090222.a2010.0000.fits' is empty! 2009-Feb-22 00:15:57 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Feb-22 00:15:57 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Feb-22 00:15:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Feb-22 00:15:57 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Feb-22 00:15:57 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 00:15:57 LOG5 begin_task: Level: (2) ID = <10040> Status = 0 0 0 0 ok 2009-Feb-22 00:15:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Feb-22 00:15:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 00:15:57 INFO2 take_data: Starting WAPP 600-second scan: 905300001 2009-Feb-22 00:15:58 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 00:15:58 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Feb-22 00:15:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Feb-22 00:15:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-22 00:15:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Feb-22 00:15:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15359.00 2009-Feb-22 00:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-22 00:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2009-Feb-22 00:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Feb-22 00:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2009-Feb-22 00:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.136 (still bad) 2009-Feb-22 00:16:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2009-Feb-22 00:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.135 (still bad) 2009-Feb-22 00:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.139 (still bad) 2009-Feb-22 00:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-Feb-22 00:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-Feb-22 00:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-Feb-22 00:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.133 (still bad) 2009-Feb-22 00:16:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:16:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:16:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.133 (still bad) 2009-Feb-22 00:16:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.132 (still bad) 2009-Feb-22 00:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-Feb-22 00:16:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.132 (still bad) 2009-Feb-22 00:16:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.137 (still bad) 2009-Feb-22 00:16:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Feb-22 00:16:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.909 1.043 0.996 0.982 2009-Feb-22 00:16:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.133 1.021 1.058 2009-Feb-22 00:16:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.918 0.924 1.004 2009-Feb-22 00:16:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.092 0.109 0.961 0.119 2009-Feb-22 00:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-Feb-22 00:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.133 (still bad) 2009-Feb-22 00:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-Feb-22 00:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-Feb-22 00:16:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:16:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.133 (still bad) 2009-Feb-22 00:16:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:17:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Feb-22 00:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:17:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:17:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:17:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-Feb-22 00:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-Feb-22 00:17:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-Feb-22 00:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.132 (still bad) 2009-Feb-22 00:17:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-Feb-22 00:17:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-Feb-22 00:17:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:17:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-Feb-22 00:17:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:17:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Feb-22 00:17:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.047 0.994 0.981 2009-Feb-22 00:17:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 1.128 1.018 1.059 2009-Feb-22 00:17:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 0.915 0.923 1.002 2009-Feb-22 00:17:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.109 0.947 0.119 2009-Feb-22 00:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:17:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:17:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:17:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:17:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:17:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-Feb-22 00:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Feb-22 00:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2009-Feb-22 00:18:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:18:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Feb-22 00:18:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2009-Feb-22 00:18:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Feb-22 00:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Feb-22 00:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Feb-22 00:18:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:18:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:18:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Feb-22 00:18:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Feb-22 00:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:18:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:18:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:18:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-Feb-22 00:18:40 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:18:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Feb-22 00:18:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.046 0.996 0.981 2009-Feb-22 00:18:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 1.129 1.019 1.064 2009-Feb-22 00:18:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.913 0.923 1.002 2009-Feb-22 00:18:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.109 0.948 0.119 2009-Feb-22 00:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:18:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-Feb-22 00:18:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:18:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-Feb-22 00:18:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:18:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:19:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:19:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:19:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:19:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:19:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-Feb-22 00:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:19:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.132 (still bad) 2009-Feb-22 00:19:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Feb-22 00:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2009-Feb-22 00:19:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.133 (still bad) 2009-Feb-22 00:19:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-Feb-22 00:19:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-Feb-22 00:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.132 (still bad) 2009-Feb-22 00:19:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:19:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.125 (still bad) 2009-Feb-22 00:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:19:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.109 < 0.75)! 2009-Feb-22 00:19:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 1.048 0.997 0.983 2009-Feb-22 00:19:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.129 1.021 1.066 2009-Feb-22 00:19:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.915 0.923 1.002 2009-Feb-22 00:19:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.109 0.950 0.119 2009-Feb-22 00:19:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:19:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:19:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-Feb-22 00:19:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:19:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-Feb-22 00:20:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Feb-22 00:20:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:20:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Feb-22 00:20:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:20:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:20:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:20:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:20:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:20:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:20:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Feb-22 00:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Feb-22 00:20:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Feb-22 00:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:20:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:20:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:20:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.047 0.995 0.980 2009-Feb-22 00:20:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.128 1.020 1.064 2009-Feb-22 00:20:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.915 0.922 1.001 2009-Feb-22 00:20:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.110 0.949 0.119 2009-Feb-22 00:20:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-Feb-22 00:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:20:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:21:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:21:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-Feb-22 00:21:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-Feb-22 00:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-Feb-22 00:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.131 (still bad) 2009-Feb-22 00:21:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:21:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:21:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.129 (still bad) 2009-Feb-22 00:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:21:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:21:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:21:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:21:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:21:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:21:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:21:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:21:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.127 (still bad) 2009-Feb-22 00:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.128 (still bad) 2009-Feb-22 00:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.130 (still bad) 2009-Feb-22 00:21:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:21:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:21:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.048 0.996 0.983 2009-Feb-22 00:21:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 1.129 1.021 1.063 2009-Feb-22 00:21:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.914 0.923 1.001 2009-Feb-22 00:21:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.110 0.949 0.119 2009-Feb-22 00:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:21:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:22:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:22:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:22:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:22:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:22:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:22:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:22:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:22:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:22:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:22:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:22:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:22:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 1.047 0.994 0.984 2009-Feb-22 00:22:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.127 1.020 1.061 2009-Feb-22 00:22:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.917 0.923 1.001 2009-Feb-22 00:22:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.110 0.949 0.119 2009-Feb-22 00:22:52 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:23:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:23:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:23:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:23:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:23:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:23:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:23:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:23:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:23:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:23:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:23:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:23:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:23:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.047 0.997 0.984 2009-Feb-22 00:23:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 1.130 1.021 1.059 2009-Feb-22 00:23:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.916 0.929 1.008 2009-Feb-22 00:23:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.110 0.949 0.120 2009-Feb-22 00:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:23:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:24:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:24:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:24:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:24:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:24:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:24:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:24:28 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:24:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:24:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:24:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:24:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 1.048 0.996 0.983 2009-Feb-22 00:24:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 1.132 1.023 1.062 2009-Feb-22 00:24:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.918 0.926 1.004 2009-Feb-22 00:24:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.110 0.948 0.120 2009-Feb-22 00:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:25:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:25:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:25:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:25:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:25:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:25:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:25:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:25:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.134 (still bad) 2009-Feb-22 00:25:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:25:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:25:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.907 1.047 1.006 0.995 2009-Feb-22 00:25:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.134 1.025 1.064 2009-Feb-22 00:25:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.922 0.923 0.998 2009-Feb-22 00:25:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.110 0.951 0.120 2009-Feb-22 00:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:25:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-22 00:25:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-22 00:25:59 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Feb-22 00:25:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-22 00:25:59 LOG5 end_task: Level: (2) ID = <10040> Status = 0 0 0 0 ok 2009-Feb-22 00:25:59 LOG1 fixed_driftmap: New position: year = 2009.1451554934467 RA = 10:07:20.1 RA/Dec = 10:07:50.4 -00:10:09.4 2009-Feb-22 00:25:59 NOTE fixed_driftmap: Correcting ZA to 18:31:23.1 ... 2009-Feb-22 00:25:59 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 18.5230750443 -CF 2009-Feb-22 00:25:59 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Feb-22 00:25:59 START begin_task: Starting task 'WAPP calibration' 2009-Feb-22 00:25:59 LOG5 begin_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2009-Feb-22 00:25:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Feb-22 00:25:59 START begin_task: Starting task 'selecting calibration type' 2009-Feb-22 00:25:59 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Feb-22 00:25:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Feb-22 00:25:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Feb-22 00:25:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:25:59 START begin_task: Starting task 'waiting on setcal' 2009-Feb-22 00:25:59 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Feb-22 00:25:59 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 18.5230750443 -CF 2009-Feb-22 00:25:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:25:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Feb-22 00:25:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:25:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:25:59 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-22 00:25:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Feb-22 00:25:59 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Feb-22 00:25:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Feb-22 00:25:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 00:25:59 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Feb-22 00:25:59 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 00:25:59 LOG5 begin_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2009-Feb-22 00:25:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:26:00 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 00:26:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 00:26:00 LOG5 end_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2009-Feb-22 00:26:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 00:26:00 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Feb-22 00:26:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 00:26:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-22 00:26:00 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 00:26:00 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2009-Feb-22 00:26:00 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 00:26:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 00:26:00 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2009-Feb-22 00:26:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 00:26:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-22 00:26:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Feb-22 00:26:00 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Feb-22 00:26:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Feb-22 00:26:00 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Feb-22 00:26:00 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Feb-22 00:26:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 00:26:00 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-Feb-22 00:26:00 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 00:26:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Feb-22 00:26:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 00:26:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 00:26:00 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-Feb-22 00:26:00 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Feb-22 00:26:00 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 00:26:00 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Feb-22 00:26:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Feb-22 00:26:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 00:26:00 INFO2 take_data: Starting WAPP 1-second scan: 905300002 2009-Feb-22 00:26:01 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 00:26:01 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Feb-22 00:26:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-22 00:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:26:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Feb-22 00:26:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15962.00 2009-Feb-22 00:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-22 00:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2009-Feb-22 00:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Feb-22 00:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2009-Feb-22 00:26:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2009-Feb-22 00:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:26:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-22 00:26:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-22 00:26:03 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Feb-22 00:26:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-22 00:26:03 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Feb-22 00:26:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Feb-22 00:26:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-22 00:26:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-22 00:26:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 00:26:03 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Feb-22 00:26:03 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 00:26:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-22 00:26:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 00:26:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 00:26:03 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Feb-22 00:26:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Feb-22 00:26:03 STOP finish_task: Finishing task 'WAPP calibration' 2009-Feb-22 00:26:03 LOG5 finish_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2009-Feb-22 00:26:03 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Feb-22 00:26:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 00:26:03 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Feb-22 00:26:03 LOG5 end_task: Level: (2) ID = <10042> Status = 0 0 0 0 ok 2009-Feb-22 00:26:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Feb-22 00:26:03 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Feb-22 00:26:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Feb-22 00:26:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Feb-22 00:26:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Feb-22 00:26:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Feb-22 00:26:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Feb-22 00:26:04 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Feb-22 00:26:04 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 00:26:04 LOG5 begin_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2009-Feb-22 00:26:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Feb-22 00:26:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 00:26:04 INFO2 take_data: Starting WAPP 600-second scan: 905300003 2009-Feb-22 00:26:04 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 00:26:04 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Feb-22 00:26:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Feb-22 00:26:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-22 00:26:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Feb-22 00:26:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15965.00 2009-Feb-22 00:26:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20090222.a2010.0001.fits 2009-Feb-22 00:26:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090222.a2010.0001.fits} 2009-Feb-22 00:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.530 (still bad) 2009-Feb-22 00:26:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-22 00:26:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:26:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:26:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:26:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:26:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2009-Feb-22 00:26:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Feb-22 00:26:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2009-Feb-22 00:26:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2009-Feb-22 00:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:26:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:26:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.133 (still bad) 2009-Feb-22 00:26:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:26:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:26:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:26:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.910 1.051 0.995 0.985 2009-Feb-22 00:26:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.132 1.025 1.068 2009-Feb-22 00:26:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.924 0.920 0.999 2009-Feb-22 00:26:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.099 0.110 0.967 0.120 2009-Feb-22 00:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:27:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:27:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:27:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:27:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:27:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:27:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 00:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2009-Feb-22 00:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.154 (still bad) 2009-Feb-22 00:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.160 (still bad) 2009-Feb-22 00:27:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.163 (still bad) 2009-Feb-22 00:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.164 (still bad) 2009-Feb-22 00:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.160 (still bad) 2009-Feb-22 00:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.154 (still bad) 2009-Feb-22 00:27:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.148 (still bad) 2009-Feb-22 00:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-Feb-22 00:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 00:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2009-Feb-22 00:27:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2009-Feb-22 00:27:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:27:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.046 0.994 0.986 2009-Feb-22 00:27:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 1.142 1.023 1.066 2009-Feb-22 00:27:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.926 0.923 1.004 2009-Feb-22 00:27:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.110 0.950 0.120 2009-Feb-22 00:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 00:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-Feb-22 00:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:28:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:28:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:28:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:28:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:28:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:28:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:28:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:28:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.048 0.994 0.983 2009-Feb-22 00:28:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 1.134 1.024 1.073 2009-Feb-22 00:28:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.924 0.920 1.002 2009-Feb-22 00:28:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.110 0.951 0.120 2009-Feb-22 00:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:29:03 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 00:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:29:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:29:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:29:58 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.047 0.996 0.985 2009-Feb-22 00:29:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 1.134 1.024 1.066 2009-Feb-22 00:29:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.926 0.920 1.001 2009-Feb-22 00:29:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.110 0.950 0.120 2009-Feb-22 00:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 00:30:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 00:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:30:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:30:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:30:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:30:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:30:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:30:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:30:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:31:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:31:00 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.046 0.997 0.987 2009-Feb-22 00:31:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.135 1.024 1.061 2009-Feb-22 00:31:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.926 0.922 1.001 2009-Feb-22 00:31:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.110 0.949 0.120 2009-Feb-22 00:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:31:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 00:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 00:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:31:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:31:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:31:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:32:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:32:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.042 0.996 0.985 2009-Feb-22 00:32:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.133 1.022 1.064 2009-Feb-22 00:32:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.923 0.923 1.004 2009-Feb-22 00:32:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.110 0.949 0.120 2009-Feb-22 00:32:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:32:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:32:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:32:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:32:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:32:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:33:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:33:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 1.048 0.992 0.983 2009-Feb-22 00:33:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.133 1.022 1.065 2009-Feb-22 00:33:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.925 0.921 0.998 2009-Feb-22 00:33:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.106 0.110 0.973 0.120 2009-Feb-22 00:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2009-Feb-22 00:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.151 (still bad) 2009-Feb-22 00:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.163 (still bad) 2009-Feb-22 00:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.174 (still bad) 2009-Feb-22 00:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.186 (still bad) 2009-Feb-22 00:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.184 (still bad) 2009-Feb-22 00:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.177 (still bad) 2009-Feb-22 00:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.169 (still bad) 2009-Feb-22 00:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.157 (still bad) 2009-Feb-22 00:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2009-Feb-22 00:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2009-Feb-22 00:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 00:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2009-Feb-22 00:34:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2009-Feb-22 00:34:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:34:04 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.043 0.991 0.983 2009-Feb-22 00:34:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 1.143 1.022 1.059 2009-Feb-22 00:34:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.919 0.920 0.999 2009-Feb-22 00:34:04 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.110 0.948 0.120 2009-Feb-22 00:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2009-Feb-22 00:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:34:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:35:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:35:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.045 0.992 0.981 2009-Feb-22 00:35:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.129 1.018 1.057 2009-Feb-22 00:35:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.920 0.921 1.005 2009-Feb-22 00:35:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.110 0.948 0.120 2009-Feb-22 00:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:35:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:36:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-22 00:36:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-22 00:36:05 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Feb-22 00:36:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-22 00:36:05 LOG5 end_task: Level: (2) ID = <10051> Status = 0 0 0 0 ok 2009-Feb-22 00:36:05 LOG1 fixed_driftmap: New position: year = 2009.1451746964281 RA = 10:17:27.8 RA/Dec = 10:17:58.1 -00:10:13.4 2009-Feb-22 00:36:05 NOTE fixed_driftmap: Correcting ZA to 18:31:27.1 ... 2009-Feb-22 00:36:05 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 18.5241890580 -CF 2009-Feb-22 00:36:05 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Feb-22 00:36:05 START begin_task: Starting task 'WAPP calibration' 2009-Feb-22 00:36:05 LOG5 begin_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2009-Feb-22 00:36:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Feb-22 00:36:05 START begin_task: Starting task 'selecting calibration type' 2009-Feb-22 00:36:05 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Feb-22 00:36:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Feb-22 00:36:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Feb-22 00:36:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:36:05 START begin_task: Starting task 'waiting on setcal' 2009-Feb-22 00:36:05 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Feb-22 00:36:05 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 18.5241890580 -CF 2009-Feb-22 00:36:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:36:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Feb-22 00:36:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:36:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:36:05 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-22 00:36:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Feb-22 00:36:05 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Feb-22 00:36:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Feb-22 00:36:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 00:36:05 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Feb-22 00:36:05 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 00:36:05 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2009-Feb-22 00:36:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:36:06 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 00:36:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 00:36:06 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2009-Feb-22 00:36:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 00:36:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Feb-22 00:36:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 00:36:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-22 00:36:06 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 00:36:06 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Feb-22 00:36:06 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 00:36:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 00:36:06 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Feb-22 00:36:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 00:36:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-22 00:36:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Feb-22 00:36:06 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Feb-22 00:36:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Feb-22 00:36:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Feb-22 00:36:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Feb-22 00:36:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 00:36:06 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Feb-22 00:36:06 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 00:36:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Feb-22 00:36:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 00:36:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 00:36:06 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Feb-22 00:36:06 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Feb-22 00:36:06 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 00:36:06 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2009-Feb-22 00:36:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Feb-22 00:36:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 00:36:06 INFO2 take_data: Starting WAPP 1-second scan: 905300004 2009-Feb-22 00:36:06 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 00:36:06 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2009-Feb-22 00:36:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-22 00:36:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:36:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.042 0.992 0.982 2009-Feb-22 00:36:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 1.126 1.020 1.062 2009-Feb-22 00:36:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.915 0.922 1.000 2009-Feb-22 00:36:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.085 0.110 0.956 0.120 2009-Feb-22 00:36:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Feb-22 00:36:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16567.00 2009-Feb-22 00:36:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-22 00:36:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:36:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:36:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:36:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:36:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2009-Feb-22 00:36:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Feb-22 00:36:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2009-Feb-22 00:36:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2009-Feb-22 00:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:36:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-22 00:36:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-22 00:36:08 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2009-Feb-22 00:36:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-22 00:36:08 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2009-Feb-22 00:36:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Feb-22 00:36:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-22 00:36:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-22 00:36:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 00:36:08 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Feb-22 00:36:08 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 00:36:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-22 00:36:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 00:36:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 00:36:08 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Feb-22 00:36:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Feb-22 00:36:09 STOP finish_task: Finishing task 'WAPP calibration' 2009-Feb-22 00:36:09 LOG5 finish_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2009-Feb-22 00:36:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Feb-22 00:36:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 00:36:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Feb-22 00:36:09 LOG5 end_task: Level: (2) ID = <10053> Status = 0 0 0 0 ok 2009-Feb-22 00:36:09 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2009-Feb-22 00:36:09 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2009-Feb-22 00:36:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Feb-22 00:36:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Feb-22 00:36:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Feb-22 00:36:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Feb-22 00:36:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Feb-22 00:36:09 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Feb-22 00:36:09 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 00:36:09 LOG5 begin_task: Level: (2) ID = <10062> Status = 0 0 0 0 ok 2009-Feb-22 00:36:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Feb-22 00:36:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 00:36:09 INFO2 take_data: Starting WAPP 600-second scan: 905300005 2009-Feb-22 00:36:09 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 00:36:09 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Feb-22 00:36:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Feb-22 00:36:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-22 00:36:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Feb-22 00:36:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16570.00 2009-Feb-22 00:36:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20090222.a2010.0002.fits 2009-Feb-22 00:36:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090222.a2010.0002.fits} 2009-Feb-22 00:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.522 (still bad) 2009-Feb-22 00:36:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-22 00:36:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:36:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:36:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:36:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:36:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2009-Feb-22 00:36:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Feb-22 00:36:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2009-Feb-22 00:36:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2009-Feb-22 00:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-Feb-22 00:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-Feb-22 00:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-Feb-22 00:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-Feb-22 00:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-Feb-22 00:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-Feb-22 00:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-Feb-22 00:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:36:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:37:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:37:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:37:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.908 1.048 0.995 0.983 2009-Feb-22 00:37:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 1.129 1.024 1.068 2009-Feb-22 00:37:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.915 0.923 1.005 2009-Feb-22 00:37:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 0.110 0.953 0.120 2009-Feb-22 00:37:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:37:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.121 (still bad) 2009-Feb-22 00:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:38:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:38:09 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.047 0.993 0.983 2009-Feb-22 00:38:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 1.127 1.019 1.065 2009-Feb-22 00:38:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.912 0.920 1.000 2009-Feb-22 00:38:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.110 0.951 0.119 2009-Feb-22 00:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:38:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.109 and 1.126 (still bad) 2009-Feb-22 00:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:39:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:39:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.040 0.989 0.980 2009-Feb-22 00:39:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 1.127 1.019 1.062 2009-Feb-22 00:39:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.913 0.917 0.999 2009-Feb-22 00:39:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.110 0.948 0.119 2009-Feb-22 00:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-Feb-22 00:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-Feb-22 00:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-Feb-22 00:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:40:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:40:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.042 0.993 0.985 2009-Feb-22 00:40:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 1.124 1.019 1.064 2009-Feb-22 00:40:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.912 0.919 1.000 2009-Feb-22 00:40:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.110 0.950 0.119 2009-Feb-22 00:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:40:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:41:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:41:14 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.043 0.995 0.983 2009-Feb-22 00:41:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 1.126 1.021 1.068 2009-Feb-22 00:41:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.915 0.920 1.001 2009-Feb-22 00:41:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.088 0.110 0.959 0.120 2009-Feb-22 00:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:41:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:42:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:42:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.046 0.991 0.980 2009-Feb-22 00:42:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.921 1.124 1.016 1.061 2009-Feb-22 00:42:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.914 0.918 0.999 2009-Feb-22 00:42:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.110 0.948 0.120 2009-Feb-22 00:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:42:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:42:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:43:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:43:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.044 0.991 0.981 2009-Feb-22 00:43:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 1.125 1.016 1.055 2009-Feb-22 00:43:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.914 0.919 1.002 2009-Feb-22 00:43:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.110 0.946 0.119 2009-Feb-22 00:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:44:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:44:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.042 0.991 0.980 2009-Feb-22 00:44:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 1.126 1.015 1.061 2009-Feb-22 00:44:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.913 0.918 0.997 2009-Feb-22 00:44:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.110 0.950 0.120 2009-Feb-22 00:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:45:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:45:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 1.047 0.995 0.984 2009-Feb-22 00:45:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 1.130 1.020 1.061 2009-Feb-22 00:45:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.915 0.921 1.003 2009-Feb-22 00:45:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 0.110 0.953 0.120 2009-Feb-22 00:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-Feb-22 00:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 00:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:46:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-22 00:46:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-22 00:46:10 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Feb-22 00:46:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-22 00:46:10 LOG5 end_task: Level: (2) ID = <10062> Status = 0 0 0 0 ok 2009-Feb-22 00:46:10 LOG1 fixed_driftmap: New position: year = 2009.1451938677212 RA = 10:27:34.4 RA/Dec = 10:28:04.7 -00:10:17.1 2009-Feb-22 00:46:10 NOTE fixed_driftmap: Correcting ZA to 18:31:30.8 ... 2009-Feb-22 00:46:10 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 18.5252103583 -CF 2009-Feb-22 00:46:10 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Feb-22 00:46:10 START begin_task: Starting task 'WAPP calibration' 2009-Feb-22 00:46:10 LOG5 begin_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2009-Feb-22 00:46:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Feb-22 00:46:10 START begin_task: Starting task 'selecting calibration type' 2009-Feb-22 00:46:10 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Feb-22 00:46:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Feb-22 00:46:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Feb-22 00:46:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:46:10 START begin_task: Starting task 'waiting on setcal' 2009-Feb-22 00:46:10 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Feb-22 00:46:10 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 18.5252103583 -CF 2009-Feb-22 00:46:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:46:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Feb-22 00:46:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:46:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:46:11 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-22 00:46:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Feb-22 00:46:11 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Feb-22 00:46:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Feb-22 00:46:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 00:46:11 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Feb-22 00:46:11 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 00:46:11 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2009-Feb-22 00:46:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:46:11 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 00:46:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 00:46:11 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2009-Feb-22 00:46:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 00:46:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Feb-22 00:46:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 00:46:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-22 00:46:11 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 00:46:11 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Feb-22 00:46:11 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 00:46:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 00:46:11 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Feb-22 00:46:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 00:46:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-22 00:46:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Feb-22 00:46:11 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Feb-22 00:46:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Feb-22 00:46:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Feb-22 00:46:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Feb-22 00:46:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 00:46:11 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Feb-22 00:46:11 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 00:46:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Feb-22 00:46:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 00:46:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 00:46:11 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Feb-22 00:46:11 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Feb-22 00:46:11 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 00:46:11 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2009-Feb-22 00:46:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Feb-22 00:46:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 00:46:11 INFO2 take_data: Starting WAPP 1-second scan: 905300006 2009-Feb-22 00:46:12 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 00:46:12 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2009-Feb-22 00:46:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-22 00:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:46:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Feb-22 00:46:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17173.00 2009-Feb-22 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-22 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2009-Feb-22 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Feb-22 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2009-Feb-22 00:46:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2009-Feb-22 00:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:46:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-22 00:46:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-22 00:46:14 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2009-Feb-22 00:46:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-22 00:46:14 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2009-Feb-22 00:46:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Feb-22 00:46:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-22 00:46:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-22 00:46:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 00:46:14 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2009-Feb-22 00:46:14 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 00:46:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-22 00:46:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 00:46:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 00:46:14 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2009-Feb-22 00:46:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Feb-22 00:46:14 STOP finish_task: Finishing task 'WAPP calibration' 2009-Feb-22 00:46:14 LOG5 finish_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2009-Feb-22 00:46:14 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Feb-22 00:46:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 00:46:14 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Feb-22 00:46:14 LOG5 end_task: Level: (2) ID = <10064> Status = 0 0 0 0 ok 2009-Feb-22 00:46:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2009-Feb-22 00:46:14 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2009-Feb-22 00:46:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Feb-22 00:46:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Feb-22 00:46:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Feb-22 00:46:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Feb-22 00:46:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Feb-22 00:46:15 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Feb-22 00:46:15 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 00:46:15 LOG5 begin_task: Level: (2) ID = <10073> Status = 0 0 0 0 ok 2009-Feb-22 00:46:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Feb-22 00:46:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 00:46:15 INFO2 take_data: Starting WAPP 600-second scan: 905300007 2009-Feb-22 00:46:15 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 00:46:15 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2009-Feb-22 00:46:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Feb-22 00:46:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-22 00:46:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Feb-22 00:46:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17176.00 2009-Feb-22 00:46:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20090222.a2010.0003.fits 2009-Feb-22 00:46:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090222.a2010.0003.fits} 2009-Feb-22 00:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.521 (still bad) 2009-Feb-22 00:46:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-22 00:46:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:46:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:46:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:46:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:46:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2009-Feb-22 00:46:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Feb-22 00:46:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2009-Feb-22 00:46:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2009-Feb-22 00:46:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:46:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:46:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 1.044 0.990 0.980 2009-Feb-22 00:46:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 1.129 1.018 1.060 2009-Feb-22 00:46:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.914 0.920 0.999 2009-Feb-22 00:46:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.110 0.953 0.119 2009-Feb-22 00:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:46:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 00:46:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 00:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:47:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:47:23 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 1.042 0.991 0.981 2009-Feb-22 00:47:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.129 1.016 1.060 2009-Feb-22 00:47:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.921 0.917 0.999 2009-Feb-22 00:47:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.110 0.950 0.120 2009-Feb-22 00:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:47:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:48:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:48:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 1.041 0.989 0.980 2009-Feb-22 00:48:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.131 1.017 1.061 2009-Feb-22 00:48:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.922 0.917 0.997 2009-Feb-22 00:48:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.110 0.948 0.119 2009-Feb-22 00:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:49:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:49:26 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.041 0.989 0.980 2009-Feb-22 00:49:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 1.131 1.020 1.063 2009-Feb-22 00:49:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.918 0.915 0.998 2009-Feb-22 00:49:26 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.110 0.948 0.120 2009-Feb-22 00:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:49:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:49:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:50:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:50:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 1.042 0.990 0.982 2009-Feb-22 00:50:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.131 1.022 1.062 2009-Feb-22 00:50:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.922 0.919 1.000 2009-Feb-22 00:50:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.110 0.950 0.119 2009-Feb-22 00:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:51:04 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:51:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:51:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.042 0.993 0.981 2009-Feb-22 00:51:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.131 1.018 1.058 2009-Feb-22 00:51:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.921 0.916 0.997 2009-Feb-22 00:51:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.110 0.948 0.120 2009-Feb-22 00:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 00:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 00:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:52:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:52:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.044 0.993 0.980 2009-Feb-22 00:52:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 1.130 1.019 1.059 2009-Feb-22 00:52:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.920 0.916 0.996 2009-Feb-22 00:52:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 0.110 0.953 0.120 2009-Feb-22 00:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 00:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:53:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:53:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.043 0.992 0.977 2009-Feb-22 00:53:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 1.135 1.019 1.060 2009-Feb-22 00:53:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.919 0.916 0.996 2009-Feb-22 00:53:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.110 0.949 0.120 2009-Feb-22 00:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:54:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:54:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.043 0.996 0.981 2009-Feb-22 00:54:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 1.131 1.020 1.064 2009-Feb-22 00:54:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.922 0.917 0.999 2009-Feb-22 00:54:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.110 0.950 0.119 2009-Feb-22 00:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:55:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:55:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.046 0.995 0.980 2009-Feb-22 00:55:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 1.136 1.021 1.066 2009-Feb-22 00:55:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.922 0.920 1.001 2009-Feb-22 00:55:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.110 0.951 0.120 2009-Feb-22 00:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:56:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-22 00:56:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-22 00:56:16 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2009-Feb-22 00:56:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-22 00:56:16 LOG5 end_task: Level: (2) ID = <10073> Status = 0 0 0 0 ok 2009-Feb-22 00:56:16 LOG1 fixed_driftmap: New position: year = 2009.1452130707023 RA = 10:37:42.1 RA/Dec = 10:38:12.4 -00:10:20.4 2009-Feb-22 00:56:16 NOTE fixed_driftmap: Correcting ZA to 18:31:34.1 ... 2009-Feb-22 00:56:16 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 18.5261403145 -CF 2009-Feb-22 00:56:16 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Feb-22 00:56:16 START begin_task: Starting task 'WAPP calibration' 2009-Feb-22 00:56:16 LOG5 begin_task: Level: (2) ID = <10075> Status = 0 0 0 0 ok 2009-Feb-22 00:56:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Feb-22 00:56:16 START begin_task: Starting task 'selecting calibration type' 2009-Feb-22 00:56:16 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Feb-22 00:56:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Feb-22 00:56:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Feb-22 00:56:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:56:16 START begin_task: Starting task 'waiting on setcal' 2009-Feb-22 00:56:16 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Feb-22 00:56:16 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 18.5261403145 -CF 2009-Feb-22 00:56:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:56:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Feb-22 00:56:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 00:56:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:56:16 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-22 00:56:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Feb-22 00:56:16 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Feb-22 00:56:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Feb-22 00:56:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 00:56:16 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Feb-22 00:56:16 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 00:56:16 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2009-Feb-22 00:56:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 00:56:17 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 00:56:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 00:56:17 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2009-Feb-22 00:56:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 00:56:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Feb-22 00:56:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 00:56:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-22 00:56:17 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 00:56:17 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Feb-22 00:56:17 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 00:56:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 00:56:17 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Feb-22 00:56:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 00:56:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-22 00:56:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Feb-22 00:56:17 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Feb-22 00:56:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Feb-22 00:56:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Feb-22 00:56:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Feb-22 00:56:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 00:56:17 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Feb-22 00:56:17 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 00:56:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Feb-22 00:56:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 00:56:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 00:56:17 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Feb-22 00:56:17 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Feb-22 00:56:17 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 00:56:17 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2009-Feb-22 00:56:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Feb-22 00:56:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 00:56:17 INFO2 take_data: Starting WAPP 1-second scan: 905300008 2009-Feb-22 00:56:17 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 00:56:17 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2009-Feb-22 00:56:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-22 00:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:56:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Feb-22 00:56:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17778.00 2009-Feb-22 00:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-22 00:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2009-Feb-22 00:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Feb-22 00:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2009-Feb-22 00:56:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2009-Feb-22 00:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:56:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-22 00:56:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-22 00:56:19 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2009-Feb-22 00:56:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-22 00:56:19 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2009-Feb-22 00:56:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Feb-22 00:56:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-22 00:56:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-22 00:56:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 00:56:19 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2009-Feb-22 00:56:20 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 00:56:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-22 00:56:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 00:56:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 00:56:20 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2009-Feb-22 00:56:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Feb-22 00:56:20 STOP finish_task: Finishing task 'WAPP calibration' 2009-Feb-22 00:56:20 LOG5 finish_task: Level: (2) ID = <10075> Status = 0 0 0 0 ok 2009-Feb-22 00:56:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Feb-22 00:56:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 00:56:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Feb-22 00:56:20 LOG5 end_task: Level: (2) ID = <10075> Status = 0 0 0 0 ok 2009-Feb-22 00:56:20 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2009-Feb-22 00:56:20 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2009-Feb-22 00:56:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Feb-22 00:56:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Feb-22 00:56:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Feb-22 00:56:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Feb-22 00:56:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Feb-22 00:56:20 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Feb-22 00:56:20 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 00:56:20 LOG5 begin_task: Level: (2) ID = <10084> Status = 0 0 0 0 ok 2009-Feb-22 00:56:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Feb-22 00:56:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 00:56:20 INFO2 take_data: Starting WAPP 600-second scan: 905300009 2009-Feb-22 00:56:20 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 00:56:20 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-Feb-22 00:56:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Feb-22 00:56:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-22 00:56:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Feb-22 00:56:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17781.00 2009-Feb-22 00:56:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20090222.a2010.0004.fits 2009-Feb-22 00:56:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090222.a2010.0004.fits} 2009-Feb-22 00:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.526 (still bad) 2009-Feb-22 00:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-22 00:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 00:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2009-Feb-22 00:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Feb-22 00:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2009-Feb-22 00:56:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2009-Feb-22 00:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:56:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:56:35 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.047 0.996 0.981 2009-Feb-22 00:56:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 1.136 1.024 1.066 2009-Feb-22 00:56:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.923 0.919 1.001 2009-Feb-22 00:56:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.110 0.952 0.120 2009-Feb-22 00:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-Feb-22 00:56:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:56:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 00:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2009-Feb-22 00:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 00:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:57:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:57:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.043 0.994 0.979 2009-Feb-22 00:57:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 1.133 1.020 1.058 2009-Feb-22 00:57:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.921 0.918 0.999 2009-Feb-22 00:57:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.110 0.951 0.120 2009-Feb-22 00:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:57:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 00:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:58:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 00:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 00:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 00:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:58:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:58:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.043 0.992 0.980 2009-Feb-22 00:58:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 1.134 1.020 1.054 2009-Feb-22 00:58:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.919 0.932 1.011 2009-Feb-22 00:58:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.110 0.949 0.120 2009-Feb-22 00:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 00:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 00:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 00:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 00:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:59:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 00:59:39 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.044 0.994 0.977 2009-Feb-22 00:59:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 1.135 1.021 1.060 2009-Feb-22 00:59:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.918 0.918 0.997 2009-Feb-22 00:59:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.110 0.950 0.120 2009-Feb-22 00:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 00:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 00:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 00:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 00:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 00:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:00:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:00:40 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.046 0.994 0.977 2009-Feb-22 01:00:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.133 1.023 1.061 2009-Feb-22 01:00:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.915 0.923 0.999 2009-Feb-22 01:00:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.110 0.953 0.119 2009-Feb-22 01:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:00:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Feb-22 01:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2009-Feb-22 01:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:01:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:01:41 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.047 0.993 0.978 2009-Feb-22 01:01:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 1.135 1.022 1.059 2009-Feb-22 01:01:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.950 0.924 1.001 2009-Feb-22 01:01:41 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.110 0.951 0.120 2009-Feb-22 01:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:02:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:02:42 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.047 0.993 0.976 2009-Feb-22 01:02:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.132 1.020 1.059 2009-Feb-22 01:02:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.915 0.918 0.999 2009-Feb-22 01:02:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.110 0.950 0.120 2009-Feb-22 01:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:03:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:03:44 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.049 0.995 0.982 2009-Feb-22 01:03:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 1.132 1.021 1.065 2009-Feb-22 01:03:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.917 0.918 0.999 2009-Feb-22 01:03:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.110 0.950 0.120 2009-Feb-22 01:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2009-Feb-22 01:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:04:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Feb-22 01:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.248 (still bad) 2009-Feb-22 01:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:04:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:04:45 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.048 0.995 0.981 2009-Feb-22 01:04:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 1.133 1.020 1.065 2009-Feb-22 01:04:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.918 0.921 1.001 2009-Feb-22 01:04:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.110 0.953 0.120 2009-Feb-22 01:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.281 (still bad) 2009-Feb-22 01:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:05:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:05:46 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.048 0.994 0.983 2009-Feb-22 01:05:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 1.143 1.030 1.073 2009-Feb-22 01:05:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.919 0.920 1.000 2009-Feb-22 01:05:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.082 0.110 0.954 0.120 2009-Feb-22 01:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-Feb-22 01:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2009-Feb-22 01:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 01:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:06:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-22 01:06:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-22 01:06:21 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2009-Feb-22 01:06:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-22 01:06:21 LOG5 end_task: Level: (2) ID = <10084> Status = 0 0 0 0 ok 2009-Feb-22 01:06:21 LOG1 fixed_driftmap: New position: year = 2009.1452322419955 RA = 10:47:48.8 RA/Dec = 10:48:19.1 -00:10:23.4 2009-Feb-22 01:06:21 NOTE fixed_driftmap: Correcting ZA to 18:31:37.1 ... 2009-Feb-22 01:06:21 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 18.5269740599 -CF 2009-Feb-22 01:06:21 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Feb-22 01:06:21 START begin_task: Starting task 'WAPP calibration' 2009-Feb-22 01:06:21 LOG5 begin_task: Level: (2) ID = <10086> Status = 0 0 0 0 ok 2009-Feb-22 01:06:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Feb-22 01:06:21 START begin_task: Starting task 'selecting calibration type' 2009-Feb-22 01:06:21 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2009-Feb-22 01:06:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Feb-22 01:06:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Feb-22 01:06:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 01:06:21 START begin_task: Starting task 'waiting on setcal' 2009-Feb-22 01:06:21 LOG5 begin_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2009-Feb-22 01:06:21 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 18.5269740599 -CF 2009-Feb-22 01:06:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 01:06:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Feb-22 01:06:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 01:06:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 01:06:22 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-22 01:06:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Feb-22 01:06:22 LOG5 end_task: Level: (4) ID = <10088> Status = 0 0 0 0 ok 2009-Feb-22 01:06:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Feb-22 01:06:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 01:06:22 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Feb-22 01:06:22 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 01:06:22 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Feb-22 01:06:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 01:06:22 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 01:06:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 01:06:22 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Feb-22 01:06:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 01:06:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Feb-22 01:06:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 01:06:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-22 01:06:22 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 01:06:22 LOG5 begin_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2009-Feb-22 01:06:22 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 01:06:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 01:06:22 LOG5 end_task: Level: (4) ID = <10090> Status = 0 0 0 0 ok 2009-Feb-22 01:06:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 01:06:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-22 01:06:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Feb-22 01:06:22 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2009-Feb-22 01:06:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Feb-22 01:06:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Feb-22 01:06:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Feb-22 01:06:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 01:06:22 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2009-Feb-22 01:06:22 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 01:06:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Feb-22 01:06:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 01:06:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 01:06:22 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2009-Feb-22 01:06:22 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Feb-22 01:06:22 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 01:06:22 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2009-Feb-22 01:06:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Feb-22 01:06:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 01:06:22 INFO2 take_data: Starting WAPP 1-second scan: 905300010 2009-Feb-22 01:06:23 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 01:06:23 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2009-Feb-22 01:06:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-22 01:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:06:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Feb-22 01:06:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18384.00 2009-Feb-22 01:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-22 01:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2009-Feb-22 01:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Feb-22 01:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2009-Feb-22 01:06:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2009-Feb-22 01:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:06:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-22 01:06:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-22 01:06:25 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2009-Feb-22 01:06:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-22 01:06:25 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2009-Feb-22 01:06:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Feb-22 01:06:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-22 01:06:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-22 01:06:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 01:06:25 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2009-Feb-22 01:06:25 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 01:06:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-22 01:06:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 01:06:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 01:06:25 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2009-Feb-22 01:06:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Feb-22 01:06:25 STOP finish_task: Finishing task 'WAPP calibration' 2009-Feb-22 01:06:25 LOG5 finish_task: Level: (2) ID = <10086> Status = 0 0 0 0 ok 2009-Feb-22 01:06:25 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Feb-22 01:06:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 01:06:25 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Feb-22 01:06:25 LOG5 end_task: Level: (2) ID = <10086> Status = 0 0 0 0 ok 2009-Feb-22 01:06:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2009-Feb-22 01:06:25 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2009-Feb-22 01:06:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Feb-22 01:06:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Feb-22 01:06:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Feb-22 01:06:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Feb-22 01:06:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Feb-22 01:06:26 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Feb-22 01:06:26 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 01:06:26 LOG5 begin_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2009-Feb-22 01:06:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Feb-22 01:06:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 01:06:26 INFO2 take_data: Starting WAPP 600-second scan: 905300011 2009-Feb-22 01:06:26 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 01:06:26 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-Feb-22 01:06:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Feb-22 01:06:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-22 01:06:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Feb-22 01:06:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18387.00 2009-Feb-22 01:06:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20090222.a2010.0005.fits 2009-Feb-22 01:06:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090222.a2010.0005.fits} 2009-Feb-22 01:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.529 (still bad) 2009-Feb-22 01:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-22 01:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2009-Feb-22 01:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Feb-22 01:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2009-Feb-22 01:06:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2009-Feb-22 01:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.276 (still bad) 2009-Feb-22 01:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:06:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:06:47 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.051 0.998 0.984 2009-Feb-22 01:06:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 1.136 1.025 1.065 2009-Feb-22 01:06:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.921 0.922 1.004 2009-Feb-22 01:06:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.084 0.110 0.956 0.120 2009-Feb-22 01:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:07:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:07:48 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.053 0.997 0.985 2009-Feb-22 01:07:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.133 1.021 1.060 2009-Feb-22 01:07:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.920 0.920 1.003 2009-Feb-22 01:07:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.083 0.110 0.954 0.120 2009-Feb-22 01:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:08:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:08:50 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.047 0.995 0.981 2009-Feb-22 01:08:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.132 1.018 1.056 2009-Feb-22 01:08:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.918 0.922 1.000 2009-Feb-22 01:08:50 LOG4 check_wapp_levels: WAPP-4 power levels: 1.180 0.110 1.039 0.120 2009-Feb-22 01:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.225 (still bad) 2009-Feb-22 01:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.257 (still bad) 2009-Feb-22 01:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.269 (still bad) 2009-Feb-22 01:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.261 (still bad) 2009-Feb-22 01:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.231 (still bad) 2009-Feb-22 01:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.193 (still bad) 2009-Feb-22 01:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.152 (still bad) 2009-Feb-22 01:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2009-Feb-22 01:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.160 (still bad) 2009-Feb-22 01:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.182 (still bad) 2009-Feb-22 01:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.207 (still bad) 2009-Feb-22 01:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.232 (still bad) 2009-Feb-22 01:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.254 (still bad) 2009-Feb-22 01:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.258 (still bad) 2009-Feb-22 01:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.246 (still bad) 2009-Feb-22 01:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.219 (still bad) 2009-Feb-22 01:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.190 (still bad) 2009-Feb-22 01:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.165 (still bad) 2009-Feb-22 01:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.153 (still bad) 2009-Feb-22 01:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.152 (still bad) 2009-Feb-22 01:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.160 (still bad) 2009-Feb-22 01:09:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:09:51 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.044 0.996 0.982 2009-Feb-22 01:09:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.959 1.169 1.020 1.058 2009-Feb-22 01:09:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.915 0.919 0.998 2009-Feb-22 01:09:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.110 0.952 0.120 2009-Feb-22 01:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.174 (still bad) 2009-Feb-22 01:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.173 (still bad) 2009-Feb-22 01:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.165 (still bad) 2009-Feb-22 01:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.154 (still bad) 2009-Feb-22 01:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2009-Feb-22 01:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 01:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:10:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:10:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.041 0.994 0.980 2009-Feb-22 01:10:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.129 1.019 1.062 2009-Feb-22 01:10:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.913 0.920 1.001 2009-Feb-22 01:10:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.108 0.110 0.978 0.120 2009-Feb-22 01:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2009-Feb-22 01:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2009-Feb-22 01:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2009-Feb-22 01:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2009-Feb-22 01:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2009-Feb-22 01:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 01:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:11:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:11:53 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.043 0.993 0.979 2009-Feb-22 01:11:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 1.134 1.020 1.062 2009-Feb-22 01:11:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.913 0.917 0.998 2009-Feb-22 01:11:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.110 0.951 0.120 2009-Feb-22 01:11:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 01:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:12:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:12:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.044 0.992 0.981 2009-Feb-22 01:12:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 1.130 1.020 1.065 2009-Feb-22 01:12:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.914 0.915 1.001 2009-Feb-22 01:12:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.110 0.951 0.120 2009-Feb-22 01:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:13:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:13:56 LOG4 check_wapp_levels: WAPP-1 power levels: 0.911 1.057 0.991 0.981 2009-Feb-22 01:13:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 1.131 1.017 1.070 2009-Feb-22 01:13:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.912 0.918 0.999 2009-Feb-22 01:13:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.110 0.949 0.120 2009-Feb-22 01:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 01:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.147 (still bad) 2009-Feb-22 01:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2009-Feb-22 01:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 01:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 01:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 01:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:14:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:14:57 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 1.044 0.990 0.981 2009-Feb-22 01:14:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 1.131 1.015 1.070 2009-Feb-22 01:14:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.917 0.915 0.999 2009-Feb-22 01:14:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.110 0.949 0.120 2009-Feb-22 01:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:15:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999966 != 99999964 diff = 2)! 2009-Feb-22 01:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:15:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:15:59 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.041 0.988 0.980 2009-Feb-22 01:15:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.131 1.013 1.065 2009-Feb-22 01:15:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.913 0.915 1.000 2009-Feb-22 01:15:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.110 0.949 0.120 2009-Feb-22 01:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:16:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-22 01:16:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-22 01:16:27 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-Feb-22 01:16:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-22 01:16:27 LOG5 end_task: Level: (2) ID = <10095> Status = 0 0 0 0 ok 2009-Feb-22 01:16:27 LOG1 fixed_driftmap: New position: year = 2009.1452514449768 RA = 10:57:56.4 RA/Dec = 10:58:26.7 -00:10:26.1 2009-Feb-22 01:16:27 NOTE fixed_driftmap: Correcting ZA to 18:31:39.8 ... 2009-Feb-22 01:16:27 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 18.5277127168 -CF 2009-Feb-22 01:16:27 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Feb-22 01:16:27 START begin_task: Starting task 'WAPP calibration' 2009-Feb-22 01:16:27 LOG5 begin_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2009-Feb-22 01:16:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Feb-22 01:16:27 START begin_task: Starting task 'selecting calibration type' 2009-Feb-22 01:16:27 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2009-Feb-22 01:16:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Feb-22 01:16:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Feb-22 01:16:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 01:16:27 START begin_task: Starting task 'waiting on setcal' 2009-Feb-22 01:16:27 LOG5 begin_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2009-Feb-22 01:16:27 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 18.5277127168 -CF 2009-Feb-22 01:16:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 01:16:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Feb-22 01:16:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 01:16:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 01:16:28 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-22 01:16:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Feb-22 01:16:28 LOG5 end_task: Level: (4) ID = <10099> Status = 0 0 0 0 ok 2009-Feb-22 01:16:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Feb-22 01:16:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 01:16:28 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Feb-22 01:16:28 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 01:16:28 LOG5 begin_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2009-Feb-22 01:16:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 01:16:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 01:16:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 01:16:28 LOG5 end_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2009-Feb-22 01:16:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 01:16:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Feb-22 01:16:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 01:16:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-22 01:16:28 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 01:16:28 LOG5 begin_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2009-Feb-22 01:16:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 01:16:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 01:16:28 LOG5 end_task: Level: (4) ID = <10101> Status = 0 0 0 0 ok 2009-Feb-22 01:16:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 01:16:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-22 01:16:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Feb-22 01:16:28 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2009-Feb-22 01:16:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Feb-22 01:16:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Feb-22 01:16:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Feb-22 01:16:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 01:16:28 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2009-Feb-22 01:16:28 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 01:16:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Feb-22 01:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:16:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 01:16:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 01:16:28 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2009-Feb-22 01:16:28 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Feb-22 01:16:28 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 01:16:28 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2009-Feb-22 01:16:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Feb-22 01:16:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 01:16:28 INFO2 take_data: Starting WAPP 1-second scan: 905300012 2009-Feb-22 01:16:28 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 01:16:28 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2009-Feb-22 01:16:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-22 01:16:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Feb-22 01:16:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18989.00 2009-Feb-22 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-22 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2009-Feb-22 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Feb-22 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2009-Feb-22 01:16:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2009-Feb-22 01:16:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-22 01:16:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-22 01:16:30 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2009-Feb-22 01:16:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-22 01:16:30 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2009-Feb-22 01:16:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Feb-22 01:16:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-22 01:16:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-22 01:16:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 01:16:30 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2009-Feb-22 01:16:30 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 01:16:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-22 01:16:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 01:16:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 01:16:30 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2009-Feb-22 01:16:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Feb-22 01:16:30 STOP finish_task: Finishing task 'WAPP calibration' 2009-Feb-22 01:16:30 LOG5 finish_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2009-Feb-22 01:16:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Feb-22 01:16:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 01:16:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Feb-22 01:16:30 LOG5 end_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2009-Feb-22 01:16:31 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2009-Feb-22 01:16:31 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2009-Feb-22 01:16:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Feb-22 01:16:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Feb-22 01:16:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Feb-22 01:16:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Feb-22 01:16:31 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Feb-22 01:16:31 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Feb-22 01:16:31 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 01:16:31 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Feb-22 01:16:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Feb-22 01:16:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 01:16:31 INFO2 take_data: Starting WAPP 600-second scan: 905300013 2009-Feb-22 01:16:31 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 01:16:31 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Feb-22 01:16:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Feb-22 01:16:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-22 01:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.527 (still bad) 2009-Feb-22 01:16:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Feb-22 01:16:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18992.00 2009-Feb-22 01:16:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20090222.a2010.0006.fits 2009-Feb-22 01:16:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090222.a2010.0006.fits} 2009-Feb-22 01:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-22 01:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2009-Feb-22 01:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Feb-22 01:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2009-Feb-22 01:16:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2009-Feb-22 01:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.527 (still bad) 2009-Feb-22 01:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:17:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:17:01 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.045 0.992 0.983 2009-Feb-22 01:17:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.134 1.015 1.064 2009-Feb-22 01:17:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.918 0.919 1.003 2009-Feb-22 01:17:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.081 0.110 0.953 0.120 2009-Feb-22 01:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 01:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2009-Feb-22 01:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.146 (still bad) 2009-Feb-22 01:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-Feb-22 01:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:17:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:18:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:18:02 LOG4 check_wapp_levels: WAPP-1 power levels: 0.907 1.051 0.992 0.984 2009-Feb-22 01:18:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.134 1.015 1.066 2009-Feb-22 01:18:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.917 0.920 1.007 2009-Feb-22 01:18:02 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.110 0.951 0.120 2009-Feb-22 01:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-Feb-22 01:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2009-Feb-22 01:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.148 (still bad) 2009-Feb-22 01:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.149 (still bad) 2009-Feb-22 01:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.148 (still bad) 2009-Feb-22 01:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2009-Feb-22 01:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 01:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:19:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:19:03 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.040 0.990 0.979 2009-Feb-22 01:19:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.137 1.015 1.062 2009-Feb-22 01:19:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.918 0.920 1.001 2009-Feb-22 01:19:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.110 0.949 0.120 2009-Feb-22 01:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:20:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:20:05 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.040 0.991 0.982 2009-Feb-22 01:20:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.922 1.131 1.014 1.062 2009-Feb-22 01:20:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.914 0.917 1.001 2009-Feb-22 01:20:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.075 0.110 0.948 0.120 2009-Feb-22 01:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:21:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:21:06 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.045 0.991 0.982 2009-Feb-22 01:21:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.132 1.031 1.082 2009-Feb-22 01:21:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.914 0.914 1.002 2009-Feb-22 01:21:06 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.110 0.949 0.120 2009-Feb-22 01:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:22:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:22:07 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.044 0.992 0.982 2009-Feb-22 01:22:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 1.130 1.017 1.061 2009-Feb-22 01:22:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.912 0.918 1.000 2009-Feb-22 01:22:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.110 0.950 0.120 2009-Feb-22 01:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:23:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:23:08 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.047 0.990 0.979 2009-Feb-22 01:23:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 1.132 1.020 1.062 2009-Feb-22 01:23:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.914 0.918 0.998 2009-Feb-22 01:23:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.110 0.948 0.120 2009-Feb-22 01:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2009-Feb-22 01:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-Feb-22 01:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-Feb-22 01:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.163 (still bad) 2009-Feb-22 01:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.183 (still bad) 2009-Feb-22 01:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.191 (still bad) 2009-Feb-22 01:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.191 (still bad) 2009-Feb-22 01:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.184 (still bad) 2009-Feb-22 01:24:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:24:10 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.045 0.997 0.984 2009-Feb-22 01:24:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.923 1.133 1.016 1.061 2009-Feb-22 01:24:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.917 0.916 1.001 2009-Feb-22 01:24:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.167 0.110 1.027 0.120 2009-Feb-22 01:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2009-Feb-22 01:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:24:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 01:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-Feb-22 01:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2009-Feb-22 01:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.151 (still bad) 2009-Feb-22 01:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.163 (still bad) 2009-Feb-22 01:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.170 (still bad) 2009-Feb-22 01:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.176 (still bad) 2009-Feb-22 01:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.183 (still bad) 2009-Feb-22 01:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.182 (still bad) 2009-Feb-22 01:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.176 (still bad) 2009-Feb-22 01:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.174 (still bad) 2009-Feb-22 01:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.165 (still bad) 2009-Feb-22 01:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.159 (still bad) 2009-Feb-22 01:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.157 (still bad) 2009-Feb-22 01:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.156 (still bad) 2009-Feb-22 01:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.154 (still bad) 2009-Feb-22 01:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.158 (still bad) 2009-Feb-22 01:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.154 (still bad) 2009-Feb-22 01:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.151 (still bad) 2009-Feb-22 01:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.150 (still bad) 2009-Feb-22 01:25:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:25:11 LOG4 check_wapp_levels: WAPP-1 power levels: 0.898 1.042 0.991 0.980 2009-Feb-22 01:25:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 1.145 1.016 1.059 2009-Feb-22 01:25:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.918 0.915 0.997 2009-Feb-22 01:25:11 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.110 0.948 0.120 2009-Feb-22 01:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-Feb-22 01:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:25:16 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999966 != 99999964 diff = 2)! 2009-Feb-22 01:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:26:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:26:12 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.043 0.990 0.980 2009-Feb-22 01:26:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 1.134 1.018 1.060 2009-Feb-22 01:26:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.917 0.916 0.998 2009-Feb-22 01:26:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.110 0.949 0.120 2009-Feb-22 01:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:26:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-22 01:26:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-22 01:26:32 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Feb-22 01:26:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-22 01:26:32 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Feb-22 01:26:32 LOG1 fixed_driftmap: New position: year = 2009.14527061627 RA = 11:08:03.1 RA/Dec = 11:08:33.4 -00:10:28.4 2009-Feb-22 01:26:32 NOTE fixed_driftmap: Correcting ZA to 18:31:42.1 ... 2009-Feb-22 01:26:32 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 18.5283524109 -CF 2009-Feb-22 01:26:32 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Feb-22 01:26:32 START begin_task: Starting task 'WAPP calibration' 2009-Feb-22 01:26:32 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Feb-22 01:26:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Feb-22 01:26:32 START begin_task: Starting task 'selecting calibration type' 2009-Feb-22 01:26:32 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2009-Feb-22 01:26:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Feb-22 01:26:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Feb-22 01:26:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 01:26:32 START begin_task: Starting task 'waiting on setcal' 2009-Feb-22 01:26:32 LOG5 begin_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2009-Feb-22 01:26:32 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 18.5283524109 -CF 2009-Feb-22 01:26:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 01:26:32 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Feb-22 01:26:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 01:26:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 01:26:33 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-22 01:26:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Feb-22 01:26:33 LOG5 end_task: Level: (4) ID = <10110> Status = 0 0 0 0 ok 2009-Feb-22 01:26:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Feb-22 01:26:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 01:26:33 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Feb-22 01:26:33 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 01:26:33 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2009-Feb-22 01:26:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 01:26:33 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 01:26:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 01:26:33 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2009-Feb-22 01:26:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 01:26:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Feb-22 01:26:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 01:26:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-22 01:26:33 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 01:26:33 LOG5 begin_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2009-Feb-22 01:26:33 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 01:26:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 01:26:33 LOG5 end_task: Level: (4) ID = <10112> Status = 0 0 0 0 ok 2009-Feb-22 01:26:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 01:26:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-22 01:26:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Feb-22 01:26:33 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2009-Feb-22 01:26:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Feb-22 01:26:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Feb-22 01:26:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Feb-22 01:26:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 01:26:33 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Feb-22 01:26:33 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 01:26:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Feb-22 01:26:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 01:26:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 01:26:33 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Feb-22 01:26:33 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Feb-22 01:26:33 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 01:26:33 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Feb-22 01:26:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Feb-22 01:26:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 01:26:33 INFO2 take_data: Starting WAPP 1-second scan: 905300014 2009-Feb-22 01:26:33 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 01:26:33 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2009-Feb-22 01:26:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-22 01:26:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Feb-22 01:26:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19594.00 2009-Feb-22 01:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-22 01:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2009-Feb-22 01:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Feb-22 01:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2009-Feb-22 01:26:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2009-Feb-22 01:26:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-22 01:26:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-22 01:26:35 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2009-Feb-22 01:26:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-22 01:26:35 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Feb-22 01:26:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Feb-22 01:26:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-22 01:26:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-22 01:26:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 01:26:35 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Feb-22 01:26:35 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 01:26:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-22 01:26:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 01:26:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 01:26:35 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Feb-22 01:26:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Feb-22 01:26:35 STOP finish_task: Finishing task 'WAPP calibration' 2009-Feb-22 01:26:35 LOG5 finish_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Feb-22 01:26:35 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Feb-22 01:26:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 01:26:35 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Feb-22 01:26:35 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Feb-22 01:26:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2009-Feb-22 01:26:36 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2009-Feb-22 01:26:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Feb-22 01:26:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Feb-22 01:26:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Feb-22 01:26:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Feb-22 01:26:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Feb-22 01:26:36 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Feb-22 01:26:36 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 01:26:36 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Feb-22 01:26:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Feb-22 01:26:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 01:26:36 INFO2 take_data: Starting WAPP 600-second scan: 905300015 2009-Feb-22 01:26:36 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 01:26:36 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Feb-22 01:26:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Feb-22 01:26:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-22 01:26:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Feb-22 01:26:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19597.00 2009-Feb-22 01:26:36 NOTE WAPPDATA-new_file: New FITS file: wapp.20090222.a2010.0007.fits 2009-Feb-22 01:26:36 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090222.a2010.0007.fits} 2009-Feb-22 01:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.530 (still bad) 2009-Feb-22 01:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-22 01:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2009-Feb-22 01:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Feb-22 01:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2009-Feb-22 01:26:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2009-Feb-22 01:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.530 (still bad) 2009-Feb-22 01:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:27:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:27:13 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.043 0.990 0.979 2009-Feb-22 01:27:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 1.135 1.019 1.063 2009-Feb-22 01:27:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.917 0.917 0.999 2009-Feb-22 01:27:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.110 0.949 0.120 2009-Feb-22 01:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:28:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:28:15 LOG4 check_wapp_levels: WAPP-1 power levels: 0.897 1.042 0.991 0.979 2009-Feb-22 01:28:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.140 1.018 1.057 2009-Feb-22 01:28:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.920 0.918 1.002 2009-Feb-22 01:28:15 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.110 0.950 0.120 2009-Feb-22 01:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 01:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 01:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.142 (still bad) 2009-Feb-22 01:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 01:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2009-Feb-22 01:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.151 (still bad) 2009-Feb-22 01:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.153 (still bad) 2009-Feb-22 01:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.159 (still bad) 2009-Feb-22 01:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.165 (still bad) 2009-Feb-22 01:29:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:29:16 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.044 0.991 0.978 2009-Feb-22 01:29:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 1.158 1.018 1.060 2009-Feb-22 01:29:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.918 0.916 0.998 2009-Feb-22 01:29:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.110 0.951 0.120 2009-Feb-22 01:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.155 (still bad) 2009-Feb-22 01:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.149 (still bad) 2009-Feb-22 01:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.144 (still bad) 2009-Feb-22 01:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 01:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.141 (still bad) 2009-Feb-22 01:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 01:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2009-Feb-22 01:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:30:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:30:17 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.052 0.993 0.981 2009-Feb-22 01:30:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 1.137 1.019 1.059 2009-Feb-22 01:30:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.919 0.913 1.001 2009-Feb-22 01:30:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.110 0.951 0.120 2009-Feb-22 01:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2009-Feb-22 01:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.146 (still bad) 2009-Feb-22 01:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.147 (still bad) 2009-Feb-22 01:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.148 (still bad) 2009-Feb-22 01:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.150 (still bad) 2009-Feb-22 01:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.145 (still bad) 2009-Feb-22 01:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.143 (still bad) 2009-Feb-22 01:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 01:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 01:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:31:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:31:18 LOG4 check_wapp_levels: WAPP-1 power levels: 0.905 1.050 0.992 0.979 2009-Feb-22 01:31:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.134 1.018 1.058 2009-Feb-22 01:31:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.920 0.917 1.001 2009-Feb-22 01:31:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.110 0.950 0.120 2009-Feb-22 01:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.140 (still bad) 2009-Feb-22 01:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.139 (still bad) 2009-Feb-22 01:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:32:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:32:20 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.043 0.991 0.979 2009-Feb-22 01:32:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 1.136 1.023 1.061 2009-Feb-22 01:32:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.923 0.915 1.000 2009-Feb-22 01:32:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.110 0.951 0.120 2009-Feb-22 01:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:33:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:33:21 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.043 0.992 0.979 2009-Feb-22 01:33:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.928 1.132 1.022 1.061 2009-Feb-22 01:33:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.920 0.918 1.000 2009-Feb-22 01:33:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.110 0.951 0.120 2009-Feb-22 01:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:34:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:34:22 LOG4 check_wapp_levels: WAPP-1 power levels: 0.900 1.042 0.991 0.977 2009-Feb-22 01:34:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 1.134 1.021 1.062 2009-Feb-22 01:34:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.919 0.919 1.000 2009-Feb-22 01:34:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.110 0.948 0.120 2009-Feb-22 01:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.138 (still bad) 2009-Feb-22 01:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.136 (still bad) 2009-Feb-22 01:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:35:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:35:24 LOG4 check_wapp_levels: WAPP-1 power levels: 0.899 1.043 0.992 0.978 2009-Feb-22 01:35:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 1.132 1.020 1.057 2009-Feb-22 01:35:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.920 0.913 0.995 2009-Feb-22 01:35:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.110 0.949 0.119 2009-Feb-22 01:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.137 (still bad) 2009-Feb-22 01:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:36:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:36:25 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.041 0.996 0.984 2009-Feb-22 01:36:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.131 1.020 1.062 2009-Feb-22 01:36:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.916 0.916 0.999 2009-Feb-22 01:36:25 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.110 0.949 0.120 2009-Feb-22 01:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:36:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-22 01:36:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-22 01:36:37 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Feb-22 01:36:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-22 01:36:37 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2009-Feb-22 01:36:37 LOG1 fixed_driftmap: New position: year = 2009.1452897875629 RA = 11:18:09.8 RA/Dec = 11:18:40.0 -00:10:30.3 2009-Feb-22 01:36:37 NOTE fixed_driftmap: Correcting ZA to 18:31:44.0 ... 2009-Feb-22 01:36:37 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 18.5288931978 -CF 2009-Feb-22 01:36:37 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Feb-22 01:36:37 START begin_task: Starting task 'WAPP calibration' 2009-Feb-22 01:36:37 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Feb-22 01:36:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Feb-22 01:36:37 START begin_task: Starting task 'selecting calibration type' 2009-Feb-22 01:36:37 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Feb-22 01:36:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Feb-22 01:36:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Feb-22 01:36:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 01:36:37 START begin_task: Starting task 'waiting on setcal' 2009-Feb-22 01:36:37 LOG5 begin_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2009-Feb-22 01:36:37 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 18.5288931978 -CF 2009-Feb-22 01:36:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 01:36:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Feb-22 01:36:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 01:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:36:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 01:36:37 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-22 01:36:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Feb-22 01:36:37 LOG5 end_task: Level: (4) ID = <10121> Status = 0 0 0 0 ok 2009-Feb-22 01:36:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Feb-22 01:36:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 01:36:37 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Feb-22 01:36:37 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 01:36:37 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2009-Feb-22 01:36:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 01:36:38 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 01:36:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 01:36:38 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2009-Feb-22 01:36:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 01:36:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Feb-22 01:36:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 01:36:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-22 01:36:38 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 01:36:38 LOG5 begin_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2009-Feb-22 01:36:38 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 01:36:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 01:36:38 LOG5 end_task: Level: (4) ID = <10123> Status = 0 0 0 0 ok 2009-Feb-22 01:36:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 01:36:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-22 01:36:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Feb-22 01:36:38 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Feb-22 01:36:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Feb-22 01:36:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Feb-22 01:36:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Feb-22 01:36:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 01:36:38 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Feb-22 01:36:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 01:36:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Feb-22 01:36:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 01:36:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 01:36:38 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Feb-22 01:36:38 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Feb-22 01:36:38 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 01:36:38 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Feb-22 01:36:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Feb-22 01:36:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 01:36:38 INFO2 take_data: Starting WAPP 1-second scan: 905300016 2009-Feb-22 01:36:38 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 01:36:38 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Feb-22 01:36:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-22 01:36:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Feb-22 01:36:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20199.00 2009-Feb-22 01:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-22 01:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2009-Feb-22 01:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Feb-22 01:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2009-Feb-22 01:36:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2009-Feb-22 01:36:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-22 01:36:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-22 01:36:40 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Feb-22 01:36:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-22 01:36:40 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Feb-22 01:36:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Feb-22 01:36:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Feb-22 01:36:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Feb-22 01:36:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 01:36:40 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Feb-22 01:36:40 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 01:36:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Feb-22 01:36:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 01:36:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 01:36:40 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Feb-22 01:36:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Feb-22 01:36:40 STOP finish_task: Finishing task 'WAPP calibration' 2009-Feb-22 01:36:40 LOG5 finish_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Feb-22 01:36:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Feb-22 01:36:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Feb-22 01:36:40 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Feb-22 01:36:40 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Feb-22 01:36:40 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2009-Feb-22 01:36:40 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2009-Feb-22 01:36:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2009-Feb-22 01:36:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2009-Feb-22 01:36:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2009-Feb-22 01:36:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2009-Feb-22 01:36:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Feb-22 01:36:41 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Feb-22 01:36:41 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 01:36:41 LOG5 begin_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2009-Feb-22 01:36:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Feb-22 01:36:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 01:36:41 INFO2 take_data: Starting WAPP 600-second scan: 905300017 2009-Feb-22 01:36:41 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 01:36:41 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Feb-22 01:36:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2009-Feb-22 01:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.526 (still bad) 2009-Feb-22 01:36:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Feb-22 01:36:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Feb-22 01:36:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20202.00 2009-Feb-22 01:36:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20090222.a2010.0008.fits 2009-Feb-22 01:36:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090222.a2010.0008.fits} 2009-Feb-22 01:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Feb-22 01:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1021.510000 MHz 2009-Feb-22 01:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1700.000000 MHz 2009-Feb-22 01:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2009-Feb-22 01:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2050.000000 MHz 2009-Feb-22 01:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.526 (still bad) 2009-Feb-22 01:36:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1800.000000 MHz 2009-Feb-22 01:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:37:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:37:27 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.047 0.996 0.984 2009-Feb-22 01:37:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.134 1.027 1.068 2009-Feb-22 01:37:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.916 0.918 1.000 2009-Feb-22 01:37:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.110 0.949 0.120 2009-Feb-22 01:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.134 (still bad) 2009-Feb-22 01:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.133 (still bad) 2009-Feb-22 01:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:38:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:38:28 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.047 0.993 0.985 2009-Feb-22 01:38:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.132 1.022 1.063 2009-Feb-22 01:38:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.917 0.918 1.003 2009-Feb-22 01:38:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.110 0.952 0.120 2009-Feb-22 01:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:39:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:39:29 LOG4 check_wapp_levels: WAPP-1 power levels: 0.903 1.041 0.990 0.982 2009-Feb-22 01:39:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.128 1.019 1.058 2009-Feb-22 01:39:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.916 0.919 1.003 2009-Feb-22 01:39:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.110 0.951 0.120 2009-Feb-22 01:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.157 (still bad) 2009-Feb-22 01:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.188 (still bad) 2009-Feb-22 01:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.207 (still bad) 2009-Feb-22 01:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.213 (still bad) 2009-Feb-22 01:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.203 (still bad) 2009-Feb-22 01:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.177 (still bad) 2009-Feb-22 01:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.146 (still bad) 2009-Feb-22 01:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.135 (still bad) 2009-Feb-22 01:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:40:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:40:31 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.042 0.990 0.979 2009-Feb-22 01:40:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 1.126 1.019 1.060 2009-Feb-22 01:40:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.913 0.913 1.000 2009-Feb-22 01:40:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.110 0.949 0.120 2009-Feb-22 01:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:41:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999966 != 99999964 diff = 2)! 2009-Feb-22 01:41:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:41:32 LOG4 check_wapp_levels: WAPP-1 power levels: 0.902 1.042 0.989 0.980 2009-Feb-22 01:41:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.126 1.015 1.056 2009-Feb-22 01:41:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.912 0.915 0.996 2009-Feb-22 01:41:32 LOG4 check_wapp_levels: WAPP-4 power levels: 1.076 0.110 0.950 0.119 2009-Feb-22 01:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 01:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:42:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:42:33 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.042 0.990 0.982 2009-Feb-22 01:42:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.926 1.127 1.019 1.060 2009-Feb-22 01:42:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.915 0.916 0.997 2009-Feb-22 01:42:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.110 0.950 0.120 2009-Feb-22 01:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.132 (still bad) 2009-Feb-22 01:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 01:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 01:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:43:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:43:34 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.040 0.990 0.981 2009-Feb-22 01:43:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.925 1.127 1.017 1.058 2009-Feb-22 01:43:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.911 0.919 0.997 2009-Feb-22 01:43:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.079 0.110 0.952 0.120 2009-Feb-22 01:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 01:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 01:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 01:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 01:44:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:44:36 LOG4 check_wapp_levels: WAPP-1 power levels: 0.901 1.042 0.990 0.983 2009-Feb-22 01:44:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 1.125 1.015 1.053 2009-Feb-22 01:44:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.912 0.915 0.999 2009-Feb-22 01:44:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.110 0.951 0.120 2009-Feb-22 01:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 01:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 01:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 01:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.124 (still bad) 2009-Feb-22 01:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-Feb-22 01:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-Feb-22 01:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.122 (still bad) 2009-Feb-22 01:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-Feb-22 01:45:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:45:37 LOG4 check_wapp_levels: WAPP-1 power levels: 0.906 1.043 0.990 0.983 2009-Feb-22 01:45:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 1.124 1.015 1.052 2009-Feb-22 01:45:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.910 0.915 1.000 2009-Feb-22 01:45:37 LOG4 check_wapp_levels: WAPP-4 power levels: 1.080 0.110 0.954 0.120 2009-Feb-22 01:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-Feb-22 01:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-Feb-22 01:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-Feb-22 01:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.123 (still bad) 2009-Feb-22 01:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.129 (still bad) 2009-Feb-22 01:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.125 (still bad) 2009-Feb-22 01:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.130 (still bad) 2009-Feb-22 01:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.126 (still bad) 2009-Feb-22 01:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.127 (still bad) 2009-Feb-22 01:46:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.110 < 0.75)! 2009-Feb-22 01:46:38 LOG4 check_wapp_levels: WAPP-1 power levels: 0.904 1.039 0.993 0.985 2009-Feb-22 01:46:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.924 1.128 1.014 1.059 2009-Feb-22 01:46:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.910 0.914 0.999 2009-Feb-22 01:46:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.078 0.110 0.950 0.120 2009-Feb-22 01:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.131 (still bad) 2009-Feb-22 01:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.110 and 1.128 (still bad) 2009-Feb-22 01:46:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Feb-22 01:46:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Feb-22 01:46:42 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Feb-22 01:46:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Feb-22 01:46:42 LOG5 end_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2009-Feb-22 01:46:42 LOG1 fixed_driftmap: New position: year = 2009.145308958856 RA = 11:28:16.5 RA/Dec = 11:28:46.7 -00:10:31.9 2009-Feb-22 01:46:42 NOTE fixed_driftmap: Correcting ZA to 18:31:45.6 ... 2009-Feb-22 01:46:42 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 18.5293340221 -CF 2009-Feb-22 01:46:42 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Feb-22 01:46:42 START begin_task: Starting task 'WAPP calibration' 2009-Feb-22 01:46:42 LOG5 begin_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2009-Feb-22 01:46:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Feb-22 01:46:42 START begin_task: Starting task 'selecting calibration type' 2009-Feb-22 01:46:42 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Feb-22 01:46:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Feb-22 01:46:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Feb-22 01:46:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 01:46:42 START begin_task: Starting task 'waiting on setcal' 2009-Feb-22 01:46:42 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2009-Feb-22 01:46:42 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 18.5293340221 -CF 2009-Feb-22 01:46:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 01:46:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Feb-22 01:46:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Feb-22 01:46:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 01:46:42 LOG4 got_cormsg: From DATATAKING: DONE 2009-Feb-22 01:46:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Feb-22 01:46:42 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2009-Feb-22 01:46:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Feb-22 01:46:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 01:46:42 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Feb-22 01:46:42 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 01:46:42 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2009-Feb-22 01:46:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Feb-22 01:46:43 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 01:46:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 01:46:43 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2009-Feb-22 01:46:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 01:46:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Feb-22 01:46:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Feb-22 01:46:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Feb-22 01:46:43 START begin_task: Starting task 'waiting on command to ALFA' 2009-Feb-22 01:46:43 LOG5 begin_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2009-Feb-22 01:46:43 LOG4 got_alfamon: From ALFAMON: ACK 2009-Feb-22 01:46:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Feb-22 01:46:43 LOG5 end_task: Level: (4) ID = <10134> Status = 0 0 0 0 ok 2009-Feb-22 01:46:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Feb-22 01:46:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Feb-22 01:46:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Feb-22 01:46:43 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Feb-22 01:46:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Feb-22 01:46:43 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Feb-22 01:46:43 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Feb-22 01:46:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Feb-22 01:46:43 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2009-Feb-22 01:46:43 LOG3 CALCONTROL-caltrig: Software trigger 2009-Feb-22 01:46:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Feb-22 01:46:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Feb-22 01:46:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Feb-22 01:46:43 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2009-Feb-22 01:46:43 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Feb-22 01:46:43 START begin_task: Starting task 'WAPP spectral observation' 2009-Feb-22 01:46:43 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-Feb-22 01:46:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Feb-22 01:46:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Feb-22 01:46:43 INFO2 take_data: Starting WAPP 1-second scan: 905300018 2009-Feb-22 01:46:43 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Feb-22 01:46:43 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-Feb-22 01:46:43 LOG4 WAPP=1+2+3+4-wappco