2010-Aug-27 22:44:00 BEGIN executive: CIMA executive starting ... 2010-Aug-27 22:44:00 NOTE executive: STARTING NEW CIMA SESSION 2010-Aug-27 22:44:00 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-Aug-27 22:44:00 INFO4 executive: This is an ON-LINE session 2010-Aug-27 22:44:00 INFO4 executive: This is a REMOTE session 2010-Aug-27 22:44:00 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-Aug-27 22:44:01 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Lyle Hoffman' 2010-Aug-27 22:44:01 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20100827' 2010-Aug-27 22:44:01 LOG2 log_preferences: Currently applied preferences: 2010-Aug-27 22:44:01 LOG2 log_preferences: prefs(dailylog) = daily 2010-Aug-27 22:44:01 LOG2 log_preferences: prefs(offlinelog) = skip 2010-Aug-27 22:44:01 LOG2 log_preferences: prefs(datawindow) = open 2010-Aug-27 22:44:01 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-Aug-27 22:44:01 LOG2 log_preferences: prefs(wappfailure) = abort 2010-Aug-27 22:44:01 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-Aug-27 22:44:01 LOG2 log_preferences: prefs(logcolours) = full 2010-Aug-27 22:44:01 LOG2 log_preferences: prefs(displaylevel) = INFO5 2010-Aug-27 22:44:01 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-Aug-27 22:44:01 LOG2 log_preferences: prefs(displayformat) = long 2010-Aug-27 22:44:01 LOG2 log_preferences: prefs(logformat) = new 2010-Aug-27 22:44:01 LOG2 log_preferences: prefs(fontsize) = 3 2010-Aug-27 22:44:01 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-Aug-27 22:44:01 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2010-Aug-27 22:44:01 ALERT executive: CIMA executive ready 2010-Aug-27 22:44:03 NOTE frontend: CIMA frontend ready 2010-Aug-27 22:44:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:44:03 LOG4 got_cormsg: From DATATAKING: setup 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2010-Aug-27 22:44:09 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: vw% io 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-Aug-27 22:44:09 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:44:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:44:22 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-Aug-27 22:44:22 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-Aug-27 22:44:22 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-Aug-27 22:44:22 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-Aug-27 22:44:22 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-27 22:44:22 NOTE select_receiver: Starting to select receiver ALFA 2010-Aug-27 22:44:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Aug-27 22:44:22 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Aug-27 22:44:22 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Aug-27 22:44:22 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Aug-27 22:44:22 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Aug-27 22:44:22 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-27 22:44:22 DONE finish_task: DONE finished selecting: receiver ALFA 2010-Aug-27 22:44:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-27 22:44:22 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Aug-27 22:44:22 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-27 22:44:22 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Aug-27 22:44:22 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Aug-27 22:44:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:44:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:44:39 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Aug-27 22:44:39 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Aug-27 22:44:39 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Aug-27 22:44:39 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Aug-27 22:44:39 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Aug-27 22:44:39 NOTE restart_wapp: Restarting all WAPPs 2010-Aug-27 22:44:39 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Aug-27 22:44:39 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Aug-27 22:44:39 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Aug-27 22:44:39 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-27 22:44:42 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Aug-27 22:44:42 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Aug-27 22:44:42 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Aug-27 22:44:42 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Aug-27 22:45:05 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc_aug10.cmd' 2010-Aug-27 22:45:09 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc_aug10.cmd' to executive ... 2010-Aug-27 22:45:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_10.conf} 2010-Aug-27 22:45:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {CATALOG galfa_togs.cat} 2010-Aug-27 22:45:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {SEEK galfasrc} 2010-Aug-27 22:45:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 10 {TRACKCURPOS} 2010-Aug-27 22:45:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 11 {ALFAANGLE 19.} 2010-Aug-27 22:45:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {WAITTRACK} 2010-Aug-27 22:45:09 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2010-Aug-27 22:45:09 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Aug-27 22:45:09 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc_aug10.cmd 1 1 7 2010-Aug-27 22:45:09 LOG4 run_command_file: Calling 'run_command_file command_galfasrc_aug10.cmd 1 1 7' 2010-Aug-27 22:45:09 BEGIN begin_task: Starting task 'running command file 'command_galfasrc_aug10.cmd'' 2010-Aug-27 22:45:09 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-27 22:45:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc_aug10.cmd' ...} 2010-Aug-27 22:45:09 NOTE run_command_file: Starting execution of command file 'command_galfasrc_aug10.cmd' from line 1 2010-Aug-27 22:45:09 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_10.conf' 2010-Aug-27 22:45:09 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Aug-27 22:45:09 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-27 22:45:09 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Aug-27 22:45:09 NOTE CIMA-load_config_file: Loading configuration file 'togs_10.conf' 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Aug-27 22:45:10 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Aug-27 22:45:11 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-27 22:45:11 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Aug-27 22:45:11 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-27 22:45:11 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Aug-27 22:45:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Aug-27 22:45:11 INFO1 config_iflo: Selecting receiver ALFA 2010-Aug-27 22:45:11 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-Aug-27 22:45:11 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2010-Aug-27 22:45:11 START begin_task: Starting task 'selecting receiver ALFA' 2010-Aug-27 22:45:11 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-27 22:45:11 NOTE select_receiver: Starting to select receiver ALFA 2010-Aug-27 22:45:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Aug-27 22:45:11 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Aug-27 22:45:11 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Aug-27 22:45:11 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Aug-27 22:45:11 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Aug-27 22:45:11 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-27 22:45:11 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-Aug-27 22:45:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 22:45:11 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Aug-27 22:45:11 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-27 22:45:11 START begin_task: Starting task 'waiting for receiver ALFA' 2010-Aug-27 22:45:11 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Aug-27 22:45:12 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-Aug-27 22:45:12 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Aug-27 22:45:12 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-Aug-27 22:45:12 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-Aug-27 22:45:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 22:45:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 22:45:12 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 22:45:12 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Aug-27 22:45:12 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 22:45:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 22:45:12 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Aug-27 22:45:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 22:45:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: alfafb 1 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-Aug-27 22:45:12 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Aug-27 22:45:12 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-Aug-27 22:45:12 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Aug-27 22:45:12 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Aug-27 22:45:12 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Aug-27 22:45:12 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Aug-27 22:45:12 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Aug-27 22:45:12 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-Aug-27 22:45:12 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-Aug-27 22:45:12 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-Aug-27 22:45:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Aug-27 22:45:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 22:45:12 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Aug-27 22:45:12 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-Aug-27 22:45:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 22:45:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:27 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 22:45:27 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Aug-27 22:45:27 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Aug-27 22:45:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Aug-27 22:45:27 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Aug-27 22:45:27 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-27 22:45:27 DONE finish_task: DONE finished configuration: IF/LO path 2010-Aug-27 22:45:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-27 22:45:27 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Aug-27 22:45:27 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-27 22:45:27 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Aug-27 22:45:27 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-27 22:45:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Aug-27 22:45:27 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Aug-27 22:45:27 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Aug-27 22:45:27 START begin_task: Starting task 'selecting calibration port' 2010-Aug-27 22:45:27 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Aug-27 22:45:27 LOG3 vw_send: To DATATAKING: calport 3 2010-Aug-27 22:45:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Aug-27 22:45:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 22:45:28 START begin_task: Starting task 'waiting on calport' 2010-Aug-27 22:45:28 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-Aug-27 22:45:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:28 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Aug-27 22:45:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 22:45:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:28 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 22:45:28 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Aug-27 22:45:28 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-Aug-27 22:45:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Aug-27 22:45:28 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Aug-27 22:45:28 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Aug-27 22:45:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 22:45:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 22:45:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 22:45:28 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Aug-27 22:45:28 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 22:45:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 22:45:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 22:45:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 22:45:28 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Aug-27 22:45:28 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Aug-27 22:45:28 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Aug-27 22:45:28 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Aug-27 22:45:28 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Aug-27 22:45:28 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Aug-27 22:45:28 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Aug-27 22:45:28 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Aug-27 22:45:28 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Aug-27 22:45:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 22:45:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 22:45:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 22:45:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 22:45:28 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Aug-27 22:45:28 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Aug-27 22:45:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 22:45:28 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Aug-27 22:45:28 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 22:45:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 22:45:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 22:45:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 22:45:28 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Aug-27 22:45:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 22:45:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 22:45:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 22:45:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 22:45:29 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Aug-27 22:45:29 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-27 22:45:29 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Aug-27 22:45:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-27 22:45:29 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Aug-27 22:45:29 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-27 22:45:29 COMMAND run_command_line: EXECUTING command 8: 'CATALOG galfa_togs.cat' 2010-Aug-27 22:45:29 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/galfa_togs.cat' 2010-Aug-27 22:45:29 COMMAND run_command_line: EXECUTING command 9: 'SEEK galfasrc' 2010-Aug-27 22:45:29 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/galfa_togs.cat galfasrc nooffset wait' 2010-Aug-27 22:45:29 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2010-Aug-27 22:45:29 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-27 22:45:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2010-Aug-27 22:45:29 LOG3 track_source: Calling 'track_source galfasrc 180.0 4.5 F 0.0 0.0 main small /share/obs4/usr/a2010/galfa_togs.cat 0 Topocentric velocity(optical)' 2010-Aug-27 22:45:29 START begin_task: Starting task 'sending tracking commands' 2010-Aug-27 22:45:29 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-27 22:45:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2010-Aug-27 22:45:29 INFO1 track_source: Starting to track galfasrc 2010-Aug-27 22:45:29 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2010-Aug-27 22:45:29 LOG3 vw_send: To DATATAKING: set ra 180.0 2010-Aug-27 22:45:29 LOG3 vw_send: To DATATAKING: set dec 4.5 2010-Aug-27 22:45:29 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-27 22:45:29 LOG3 vw_send: To DATATAKING: pnt tr 180.0 4.5 -CF 2010-Aug-27 22:45:29 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-27 22:45:29 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-27 22:45:29 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-27 22:45:29 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-27 22:45:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 22:45:29 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-27 22:45:29 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-27 22:45:29 START begin_task: Starting task 'waiting on telescope' 2010-Aug-27 22:45:29 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-27 22:45:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-27 22:45:29 LOG3 waittrk: Start waittrk 5 2010-Aug-27 22:45:29 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-27 22:45:29 LOG5 begin_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2010-Aug-27 22:45:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 22:45:29 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2010-Aug-27 22:45:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Aug-27 22:45:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Aug-27 22:45:29 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2010-Aug-27 22:45:29 LOG4 got_cormsg: From DATATAKING: set dec 4.5 2010-Aug-27 22:45:29 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2010-Aug-27 22:45:29 LOG4 got_cormsg: From DATATAKING: vw% 4.5 2010-Aug-27 22:45:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:29 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-27 22:45:29 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 4.5 -CF 2010-Aug-27 22:45:29 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-27 22:45:29 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-27 22:45:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:29 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0032.fits 2010-Aug-27 22:45:29 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0032.fits} 2010-Aug-27 22:45:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 22:45:34 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-27 22:45:34 LOG5 end_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2010-Aug-27 22:45:34 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-27 22:45:34 LOG5 begin_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2010-Aug-27 22:45:40 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-27 22:45:40 LOG5 end_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2010-Aug-27 22:45:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-27 22:45:41 INFO2 waittrk: Now tracking galfasrc 2010-Aug-27 22:45:41 LOG4 waittrk: Current telescope position: Az = 179.73 ZA = 4.52 2010-Aug-27 22:45:41 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-27 22:45:41 LOG5 finish_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-27 22:45:41 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-27 22:45:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 22:45:41 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-27 22:45:41 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-27 22:45:41 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2010-Aug-27 22:45:41 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-27 22:45:41 DONE finish_task: DONE finished tracking: source 'galfasrc' 2010-Aug-27 22:45:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-27 22:45:41 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2010-Aug-27 22:45:41 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-27 22:45:41 COMMAND run_command_line: EXECUTING command 10: 'TRACKCURPOS' 2010-Aug-27 22:45:41 BEGIN begin_task: Starting task 'tracking current position' 2010-Aug-27 22:45:41 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-27 22:45:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2010-Aug-27 22:45:41 INFO1 track_current_pos: Starting to track the current commanded position RA = 20:43:02.9 and Dec = +22:48:41.6 2010-Aug-27 22:45:41 LOG3 track_source: Calling 'track_source Cur-pos 204302.9 224841.6 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-Aug-27 22:45:41 START begin_task: Starting task 'sending tracking commands' 2010-Aug-27 22:45:41 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-27 22:45:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2010-Aug-27 22:45:41 INFO1 track_source: Starting to track Cur-pos 2010-Aug-27 22:45:41 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2010-Aug-27 22:45:41 LOG3 vw_send: To DATATAKING: set ra 204302.9 2010-Aug-27 22:45:41 LOG3 vw_send: To DATATAKING: set dec 224841.6 2010-Aug-27 22:45:41 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-27 22:45:41 LOG3 vw_send: To DATATAKING: pnt tr 204302.9 224841.6 -CJ 2010-Aug-27 22:45:41 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-27 22:45:41 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-27 22:45:41 LOG5 finish_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-27 22:45:41 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-27 22:45:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 22:45:41 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-27 22:45:41 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-27 22:45:41 START begin_task: Starting task 'waiting on telescope' 2010-Aug-27 22:45:41 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-27 22:45:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-27 22:45:41 LOG3 waittrk: Start waittrk 5 2010-Aug-27 22:45:41 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-27 22:45:41 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2010-Aug-27 22:45:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2010-Aug-27 22:45:41 LOG4 got_cormsg: From DATATAKING: set ra 204302.9 2010-Aug-27 22:45:41 LOG4 got_cormsg: From DATATAKING: set dec 224841.6 2010-Aug-27 22:45:41 LOG4 got_cormsg: From DATATAKING: vw% 204302.9 2010-Aug-27 22:45:41 LOG4 got_cormsg: From DATATAKING: vw% 224841.6 2010-Aug-27 22:45:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:41 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-27 22:45:41 LOG4 got_cormsg: From DATATAKING: pnt tr 204302.9 224841.6 -CJ 2010-Aug-27 22:45:41 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-27 22:45:41 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-27 22:45:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:45:46 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-27 22:45:46 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2010-Aug-27 22:45:46 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-27 22:45:46 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Aug-27 22:45:51 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-27 22:45:51 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Aug-27 22:45:51 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-27 22:45:51 INFO2 waittrk: Now tracking Cur-pos 2010-Aug-27 22:45:51 LOG4 waittrk: Current telescope position: Az = 179.19 ZA = 4.52 2010-Aug-27 22:45:51 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-27 22:45:51 LOG5 finish_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-27 22:45:51 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-27 22:45:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 22:45:51 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-27 22:45:51 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-27 22:45:51 STOP finish_task: Finishing task 'tracking current position' 2010-Aug-27 22:45:51 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-27 22:45:51 DONE finish_task: DONE finished tracking: current position 2010-Aug-27 22:45:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-27 22:45:52 END end_task: Finishing task 'tracking current position' with status 'OK' 2010-Aug-27 22:45:52 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-27 22:45:52 COMMAND run_command_line: EXECUTING command 11: 'ALFAANGLE 19.' 2010-Aug-27 22:45:52 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19. 2010-Aug-27 22:45:52 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-27 22:45:52 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-27 22:45:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-27 22:45:52 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-27 22:45:52 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19. REPLY 2010-Aug-27 22:45:52 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Aug-27 22:45:52 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Aug-27 22:45:52 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Aug-27 22:46:52 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-27 22:46:52 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-27 22:46:52 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Aug-27 22:46:52 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Aug-27 22:46:52 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Aug-27 22:46:52 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-27 22:46:52 LOG5 finish_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-27 22:46:52 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-27 22:46:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-27 22:46:52 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-27 22:46:52 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-27 22:46:52 COMMAND run_command_line: EXECUTING command 12: 'WAITTRACK' 2010-Aug-27 22:46:52 BEGIN begin_task: Starting task 'waiting on telescope' 2010-Aug-27 22:46:52 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-27 22:46:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-27 22:46:52 LOG3 waittrk: Start waittrk 5 2010-Aug-27 22:46:52 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-27 22:46:52 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Aug-27 22:46:57 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-27 22:46:57 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Aug-27 22:46:57 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-27 22:46:57 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Aug-27 22:46:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-27 22:46:57 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Aug-27 22:46:57 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Aug-27 22:46:57 INFO2 waittrk: Now tracking Cur-pos 2010-Aug-27 22:46:57 LOG4 waittrk: Current telescope position: Az = 175.96 ZA = 4.53 2010-Aug-27 22:46:57 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-27 22:46:57 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-27 22:46:57 DONE finish_task: DONE finished waiting: telescope on source 2010-Aug-27 22:46:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-27 22:46:57 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-27 22:46:58 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-27 22:46:58 COMMAND run_command_line: EXECUTING command 16: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-Aug-27 22:46:58 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-Aug-27 22:46:58 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-27 22:46:58 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-Aug-27 22:46:58 BEGIN begin_task: Starting task 'smart frequency switching' 2010-Aug-27 22:46:58 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-27 22:46:58 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2010-Aug-27 22:46:58 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-Aug-27 22:46:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-Aug-27 22:46:58 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 22:46:58 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Aug-27 22:46:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 22:46:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 22:46:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 22:46:58 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 22:46:58 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2010-Aug-27 22:46:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 22:46:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 22:46:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:46:58 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 22:46:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 22:46:58 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2010-Aug-27 22:46:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 22:46:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 22:46:58 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 22:46:58 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 22:46:58 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Aug-27 22:46:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:46:59 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 22:46:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 22:46:59 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Aug-27 22:47:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 22:47:00 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 22:47:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 22:47:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 22:47:00 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 22:47:00 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-Aug-27 22:47:00 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 22:47:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 22:47:00 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-Aug-27 22:47:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 22:47:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 22:47:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 22:47:00 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Aug-27 22:47:00 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 22:47:00 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 22:47:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 22:47:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 22:47:00 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20100827.a2010.0032.fits' is empty! 2010-Aug-27 22:47:00 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-Aug-27 22:47:00 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Aug-27 22:47:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 22:47:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 22:47:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 22:47:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 22:47:00 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Aug-27 22:47:00 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 22:47:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 22:47:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 22:47:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 22:47:00 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Aug-27 22:47:00 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Aug-27 22:47:00 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-27 22:47:00 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-27 22:47:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Aug-27 22:47:00 INFO2 adjust_power: Starting to adjust WAPP power 2010-Aug-27 22:47:00 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Aug-27 22:47:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Aug-27 22:47:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 22:47:00 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Aug-27 22:47:00 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Aug-27 22:47:00 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Aug-27 22:47:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 22:47:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 22:47:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:47:03 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 22:47:03 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Aug-27 22:47:03 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Aug-27 22:47:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Aug-27 22:47:03 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-27 22:47:03 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-27 22:47:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Aug-27 22:47:03 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-27 22:47:03 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-27 22:47:03 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-27 22:47:03 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-27 22:47:03 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Aug-27 22:47:03 LOG5 begin_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2010-Aug-27 22:47:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Aug-27 22:47:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:47:04 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2010-Aug-27 22:47:04 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 5 dB 2010-Aug-27 22:47:04 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 3 dB --- beam 3: 3 3 dB 2010-Aug-27 22:47:04 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2010-Aug-27 22:47:04 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Aug-27 22:47:04 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Aug-27 22:47:04 LOG5 end_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2010-Aug-27 22:47:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.121 1.106 ALFA beam 1: 0.893 0.948 2010-Aug-27 22:47:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.932 1.064 ALFA beam 3: 0.998 0.923 2010-Aug-27 22:47:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.021 0.837 ALFA beam 5: 1.035 1.061 2010-Aug-27 22:47:04 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.049 0.807 ALFA beam 7: 0.921 0.952 2010-Aug-27 22:47:04 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-27 22:47:04 LOG5 finish_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-27 22:47:04 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Aug-27 22:47:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 22:47:04 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-27 22:47:04 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-27 22:47:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 22:47:04 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-27 22:47:04 LOG5 finish_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-27 22:47:04 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Aug-27 22:47:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 22:47:04 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-27 22:47:04 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-27 22:47:04 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-Aug-27 22:47:04 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-27 22:47:04 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-27 22:47:04 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:47:04 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:47:04 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:47:04 LOG2 antvel: Parameters to Doppler: Topocentric 96423 2010 239 0.0 2010-Aug-27 22:47:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:47:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-27 22:47:04 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-27 22:47:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:47:04 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:47:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-27 22:47:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:47:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-Aug-27 22:47:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:47:04 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Aug-27 22:47:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-27 22:47:04 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.748725 2010.6569454901512 18.999933 2010-Aug-27 22:47:04 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222259 22.811555555555557 2010-Aug-27 22:47:04 LOG4 log_alfabeam: ALFABEAM 1 20.719253875625270 22.708339093747625 2010-Aug-27 22:47:04 LOG4 log_alfabeam: ALFABEAM 2 20.723844486655413 22.782347612761054 2010-Aug-27 22:47:04 LOG4 log_alfabeam: ALFABEAM 3 20.722160087221049 22.885924199296920 2010-Aug-27 22:47:04 LOG4 log_alfabeam: ALFABEAM 4 20.715629867791719 22.914641118267738 2010-Aug-27 22:47:04 LOG4 log_alfabeam: ALFABEAM 5 20.711010207861534 22.838959687412178 2010-Aug-27 22:47:04 LOG4 log_alfabeam: ALFABEAM 6 20.712949132650010 22.736262957180003 2010-Aug-27 22:47:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900154 2010-Aug-27 22:47:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:47:05 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Aug-27 22:47:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:47:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-27 22:47:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:47:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:47:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:47:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-27 22:47:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10026.00 2010-Aug-27 22:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:47:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:47:16 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Aug-27 22:47:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:47:16 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Aug-27 22:47:16 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-Aug-27 22:47:16 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-27 22:47:16 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-27 22:47:16 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:47:16 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:47:16 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:47:16 LOG2 antvel: Parameters to Doppler: Topocentric 96436 2010 239 0.0 2010-Aug-27 22:47:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:47:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-27 22:47:16 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-27 22:47:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:47:16 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:47:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-27 22:47:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:47:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-Aug-27 22:47:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:47:16 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Aug-27 22:47:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-27 22:47:16 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.752346 2010.6569459020964 18.999933 2010-Aug-27 22:47:16 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222277 22.811555555555557 2010-Aug-27 22:47:16 LOG4 log_alfabeam: ALFABEAM 1 20.719338873193657 22.708626859150723 2010-Aug-27 22:47:16 LOG4 log_alfabeam: ALFABEAM 2 20.723868225000480 22.783355297088907 2010-Aug-27 22:47:16 LOG4 log_alfabeam: ALFABEAM 3 20.722098338376124 22.886659115110191 2010-Aug-27 22:47:16 LOG4 log_alfabeam: ALFABEAM 4 20.715544908977829 22.914343898171584 2010-Aug-27 22:47:16 LOG4 log_alfabeam: ALFABEAM 5 20.710988077912312 22.837939530057877 2010-Aug-27 22:47:16 LOG4 log_alfabeam: ALFABEAM 6 20.713011446376669 22.735554857053817 2010-Aug-27 22:47:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900155 2010-Aug-27 22:47:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:47:17 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-Aug-27 22:47:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:47:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-27 22:47:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:47:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:47:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:47:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-27 22:47:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10038.00 2010-Aug-27 22:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:47:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:47:28 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-Aug-27 22:47:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:47:28 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Aug-27 22:47:28 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-Aug-27 22:47:28 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-27 22:47:28 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-27 22:47:28 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:47:28 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:47:28 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:47:28 LOG2 antvel: Parameters to Doppler: Topocentric 96448 2010 239 0.0 2010-Aug-27 22:47:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:47:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-27 22:47:28 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-27 22:47:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:47:28 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:47:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-27 22:47:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:47:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-Aug-27 22:47:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:47:28 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Aug-27 22:47:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-27 22:47:28 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.755688 2010.6569462823534 18.999933 2010-Aug-27 22:47:28 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222241 22.811555555555557 2010-Aug-27 22:47:28 LOG4 log_alfabeam: ALFABEAM 1 20.719416970516907 22.708903838255431 2010-Aug-27 22:47:28 LOG4 log_alfabeam: ALFABEAM 2 20.723889362846172 22.784287040157032 2010-Aug-27 22:47:28 LOG4 log_alfabeam: ALFABEAM 3 20.722040905678419 22.887327574043365 2010-Aug-27 22:47:28 LOG4 log_alfabeam: ALFABEAM 4 20.715466861626609 22.914058237713210 2010-Aug-27 22:47:28 LOG4 log_alfabeam: ALFABEAM 5 20.710968440092810 22.836996729833125 2010-Aug-27 22:47:28 LOG4 log_alfabeam: ALFABEAM 6 20.713069359550659 22.734911255513698 2010-Aug-27 22:47:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900156 2010-Aug-27 22:47:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:47:29 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-Aug-27 22:47:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:47:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-27 22:47:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:47:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:47:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:47:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-27 22:47:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10050.00 2010-Aug-27 22:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:47:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:47:40 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-Aug-27 22:47:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:47:40 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Aug-27 22:47:40 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-Aug-27 22:47:40 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-27 22:47:40 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-27 22:47:40 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:47:40 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:47:40 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:47:40 LOG2 antvel: Parameters to Doppler: Topocentric 96460 2010 239 0.0 2010-Aug-27 22:47:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:47:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-27 22:47:40 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-27 22:47:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:47:40 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:47:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-27 22:47:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:47:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-Aug-27 22:47:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:47:40 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Aug-27 22:47:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-27 22:47:40 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.759031 2010.6569466626104 18.999933 2010-Aug-27 22:47:40 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222295 22.811555555555557 2010-Aug-27 22:47:40 LOG4 log_alfabeam: ALFABEAM 1 20.719494729739271 22.709191682684114 2010-Aug-27 22:47:40 LOG4 log_alfabeam: ALFABEAM 2 20.723909762974120 22.785220376931449 2010-Aug-27 22:47:40 LOG4 log_alfabeam: ALFABEAM 3 20.721983053171520 22.887986616510290 2010-Aug-27 22:47:40 LOG4 log_alfabeam: ALFABEAM 4 20.715389165922097 22.913761757942069 2010-Aug-27 22:47:40 LOG4 log_alfabeam: ALFABEAM 5 20.710949554296981 22.836052774271515 2010-Aug-27 22:47:40 LOG4 log_alfabeam: ALFABEAM 6 20.713127653319297 22.734277164334657 2010-Aug-27 22:47:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900157 2010-Aug-27 22:47:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:47:41 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-Aug-27 22:47:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:47:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-27 22:47:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:47:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-27 22:47:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10062.00 2010-Aug-27 22:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:47:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:47:52 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-Aug-27 22:47:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:47:52 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Aug-27 22:47:52 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-Aug-27 22:47:52 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-27 22:47:52 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-27 22:47:52 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:47:52 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:47:52 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:47:52 LOG2 antvel: Parameters to Doppler: Topocentric 96472 2010 239 0.0 2010-Aug-27 22:47:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:47:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-27 22:47:52 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-27 22:47:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:47:52 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:47:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-27 22:47:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:47:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-Aug-27 22:47:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:47:52 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-Aug-27 22:47:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-27 22:47:52 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.762373 2010.6569470428676 18.999933 2010-Aug-27 22:47:52 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222259 22.811555555555547 2010-Aug-27 22:47:52 LOG4 log_alfabeam: ALFABEAM 1 20.719572081244575 22.709490062422073 2010-Aug-27 22:47:52 LOG4 log_alfabeam: ALFABEAM 2 20.723929410831708 22.786154439275837 2010-Aug-27 22:47:52 LOG4 log_alfabeam: ALFABEAM 3 20.721924836653770 22.888635688421406 2010-Aug-27 22:47:52 LOG4 log_alfabeam: ALFABEAM 4 20.715311891319434 22.913454799317620 2010-Aug-27 22:47:52 LOG4 log_alfabeam: ALFABEAM 5 20.710931433108083 22.835108541999372 2010-Aug-27 22:47:52 LOG4 log_alfabeam: ALFABEAM 6 20.713186271578181 22.733653106029934 2010-Aug-27 22:47:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900158 2010-Aug-27 22:47:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:47:53 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Aug-27 22:47:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:47:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-27 22:47:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:47:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:47:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:47:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-27 22:47:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10074.00 2010-Aug-27 22:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:48:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:48:04 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Aug-27 22:48:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:48:04 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-Aug-27 22:48:04 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-Aug-27 22:48:04 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-27 22:48:04 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-27 22:48:04 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:48:04 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:48:04 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:48:04 LOG2 antvel: Parameters to Doppler: Topocentric 96484 2010 239 0.0 2010-Aug-27 22:48:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:48:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-27 22:48:04 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-27 22:48:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:48:04 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:48:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-27 22:48:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:48:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-Aug-27 22:48:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:48:04 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Aug-27 22:48:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-27 22:48:04 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.765716 2010.6569474231246 18.999933 2010-Aug-27 22:48:04 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222213 22.811555555555557 2010-Aug-27 22:48:04 LOG4 log_alfabeam: ALFABEAM 1 20.719649048733533 22.709798989140292 2010-Aug-27 22:48:04 LOG4 log_alfabeam: ALFABEAM 2 20.723948316548974 22.787089477322162 2010-Aug-27 22:48:04 LOG4 log_alfabeam: ALFABEAM 3 20.721866242708177 22.889275028654151 2010-Aug-27 22:48:04 LOG4 log_alfabeam: ALFABEAM 4 20.715235014023897 22.913137350200270 2010-Aug-27 22:48:04 LOG4 log_alfabeam: ALFABEAM 5 20.710914066238217 22.834163780328247 2010-Aug-27 22:48:04 LOG4 log_alfabeam: ALFABEAM 6 20.713245227992985 22.733038840089939 2010-Aug-27 22:48:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900159 2010-Aug-27 22:48:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:48:05 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Aug-27 22:48:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:48:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-27 22:48:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:48:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:48:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:48:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-27 22:48:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10086.00 2010-Aug-27 22:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:48:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:48:16 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Aug-27 22:48:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:48:16 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Aug-27 22:48:16 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-Aug-27 22:48:16 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-27 22:48:16 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-27 22:48:16 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:48:16 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:48:16 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:48:16 LOG2 antvel: Parameters to Doppler: Topocentric 96496 2010 239 0.0 2010-Aug-27 22:48:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:48:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-27 22:48:16 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-27 22:48:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:48:16 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:48:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-27 22:48:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:48:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-Aug-27 22:48:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:48:16 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Aug-27 22:48:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-27 22:48:16 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.769058 2010.6569478033816 18.999933 2010-Aug-27 22:48:16 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222241 22.811555555555557 2010-Aug-27 22:48:16 LOG4 log_alfabeam: ALFABEAM 1 20.719725564124328 22.710118102544090 2010-Aug-27 22:48:16 LOG4 log_alfabeam: ALFABEAM 2 20.723966467903008 22.788024624453335 2010-Aug-27 22:48:16 LOG4 log_alfabeam: ALFABEAM 3 20.721807327993670 22.889904115659984 2010-Aug-27 22:48:16 LOG4 log_alfabeam: ALFABEAM 4 20.715158601908787 22.912809781022247 2010-Aug-27 22:48:16 LOG4 log_alfabeam: ALFABEAM 5 20.710897463914002 22.833219364611388 2010-Aug-27 22:48:16 LOG4 log_alfabeam: ALFABEAM 6 20.713304465747655 22.732434856556580 2010-Aug-27 22:48:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900160 2010-Aug-27 22:48:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:48:17 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-Aug-27 22:48:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:48:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-27 22:48:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:48:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:48:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:48:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-27 22:48:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10098.00 2010-Aug-27 22:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:48:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:48:28 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-Aug-27 22:48:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:48:28 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Aug-27 22:48:28 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Aug-27 22:48:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 22:48:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 22:48:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 22:48:28 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Aug-27 22:48:28 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 22:48:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 22:48:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 22:48:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 22:48:28 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Aug-27 22:48:28 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-Aug-27 22:48:28 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-27 22:48:28 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-27 22:48:28 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:48:28 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:48:28 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:48:28 LOG2 antvel: Parameters to Doppler: Topocentric 96508 2010 239 0.0 2010-Aug-27 22:48:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:48:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-27 22:48:28 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-27 22:48:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:48:28 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:48:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-27 22:48:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:48:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-Aug-27 22:48:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:48:28 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Aug-27 22:48:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-Aug-27 22:48:28 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.772401 2010.6569481836386 18.999933 2010-Aug-27 22:48:28 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222245 22.811555555555554 2010-Aug-27 22:48:28 LOG4 log_alfabeam: ALFABEAM 1 20.719801651738031 22.710447409796615 2010-Aug-27 22:48:28 LOG4 log_alfabeam: ALFABEAM 2 20.723983875551987 22.788960134955062 2010-Aug-27 22:48:28 LOG4 log_alfabeam: ALFABEAM 3 20.721748079017967 22.890523197352447 2010-Aug-27 22:48:28 LOG4 log_alfabeam: ALFABEAM 4 20.715082630543655 22.912472084467034 2010-Aug-27 22:48:28 LOG4 log_alfabeam: ALFABEAM 5 20.710881615325054 22.832275037327811 2010-Aug-27 22:48:28 LOG4 log_alfabeam: ALFABEAM 6 20.713363998636041 22.731840906150278 2010-Aug-27 22:48:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900161 2010-Aug-27 22:48:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:48:29 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-Aug-27 22:48:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:48:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-27 22:48:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:48:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:48:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:48:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-27 22:48:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10110.00 2010-Aug-27 22:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:48:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:48:40 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-Aug-27 22:48:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:48:40 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Aug-27 22:48:40 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-Aug-27 22:48:40 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-27 22:48:40 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-27 22:48:40 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:48:40 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:48:40 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:48:40 LOG2 antvel: Parameters to Doppler: Topocentric 96520 2010 239 0.0 2010-Aug-27 22:48:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:48:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-27 22:48:40 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-27 22:48:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:48:40 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:48:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-27 22:48:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:48:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-Aug-27 22:48:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:48:40 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Aug-27 22:48:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-Aug-27 22:48:40 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.775743 2010.6569485638959 18.999933 2010-Aug-27 22:48:40 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222252 22.811555555555554 2010-Aug-27 22:48:40 LOG4 log_alfabeam: ALFABEAM 1 20.719877245195846 22.710786522293958 2010-Aug-27 22:48:40 LOG4 log_alfabeam: ALFABEAM 2 20.724000529577395 22.789895146375930 2010-Aug-27 22:48:40 LOG4 log_alfabeam: ALFABEAM 3 20.721688553099604 22.891131785465980 2010-Aug-27 22:48:40 LOG4 log_alfabeam: ALFABEAM 4 20.715007166053010 22.912124658920050 2010-Aug-27 22:48:40 LOG4 log_alfabeam: ALFABEAM 5 20.710866528378979 22.831331667909431 2010-Aug-27 22:48:40 LOG4 log_alfabeam: ALFABEAM 6 20.713423769327655 22.731257445875276 2010-Aug-27 22:48:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900162 2010-Aug-27 22:48:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:48:41 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Aug-27 22:48:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:48:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-27 22:48:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:48:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:48:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:48:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-27 22:48:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10122.00 2010-Aug-27 22:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:48:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:48:52 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Aug-27 22:48:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:48:52 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Aug-27 22:48:52 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-Aug-27 22:48:52 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-27 22:48:52 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-27 22:48:52 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:48:52 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:48:52 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:48:52 LOG2 antvel: Parameters to Doppler: Topocentric 96532 2010 239 0.0 2010-Aug-27 22:48:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:48:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-27 22:48:52 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-27 22:48:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:48:52 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:48:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-27 22:48:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:48:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-Aug-27 22:48:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:48:52 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Aug-27 22:48:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-Aug-27 22:48:52 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.779086 2010.6569489441529 18.999933 2010-Aug-27 22:48:52 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222273 22.811555555555561 2010-Aug-27 22:48:52 LOG4 log_alfabeam: ALFABEAM 1 20.719952369497221 22.711135443869420 2010-Aug-27 22:48:52 LOG4 log_alfabeam: ALFABEAM 2 20.724016441130971 22.790829918291745 2010-Aug-27 22:48:52 LOG4 log_alfabeam: ALFABEAM 3 20.721628736574477 22.891730136935728 2010-Aug-27 22:48:52 LOG4 log_alfabeam: ALFABEAM 4 20.714932183315739 22.911767500186887 2010-Aug-27 22:48:52 LOG4 log_alfabeam: ALFABEAM 5 20.710852191784927 22.830388992884810 2010-Aug-27 22:48:52 LOG4 log_alfabeam: ALFABEAM 6 20.713483791838488 22.730684217789875 2010-Aug-27 22:48:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900163 2010-Aug-27 22:48:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:48:53 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Aug-27 22:48:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:48:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-27 22:48:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:48:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:48:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:48:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-27 22:48:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10134.00 2010-Aug-27 22:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:49:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:49:04 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Aug-27 22:49:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:49:04 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Aug-27 22:49:04 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-Aug-27 22:49:04 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-27 22:49:04 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-27 22:49:04 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:49:04 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:49:04 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:49:04 LOG2 antvel: Parameters to Doppler: Topocentric 96544 2010 239 0.0 2010-Aug-27 22:49:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:49:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-27 22:49:04 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-27 22:49:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:49:04 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:49:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-27 22:49:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:49:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-Aug-27 22:49:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:49:04 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Aug-27 22:49:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-Aug-27 22:49:04 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.782428 2010.6569493244099 18.999933 2010-Aug-27 22:49:04 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222252 22.811555555555547 2010-Aug-27 22:49:04 LOG4 log_alfabeam: ALFABEAM 1 20.720026960117107 22.711493759744389 2010-Aug-27 22:49:04 LOG4 log_alfabeam: ALFABEAM 2 20.724031602555062 22.791763594955956 2010-Aug-27 22:49:04 LOG4 log_alfabeam: ALFABEAM 3 20.721568687220397 22.892317797239468 2010-Aug-27 22:49:04 LOG4 log_alfabeam: ALFABEAM 4 20.714857746559453 22.911401032428241 2010-Aug-27 22:49:04 LOG4 log_alfabeam: ALFABEAM 5 20.710838611185856 22.829447873241548 2010-Aug-27 22:49:04 LOG4 log_alfabeam: ALFABEAM 6 20.713544008519204 22.730121645567483 2010-Aug-27 22:49:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900164 2010-Aug-27 22:49:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:49:05 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-Aug-27 22:49:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:49:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-27 22:49:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:49:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:49:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:49:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-27 22:49:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10146.00 2010-Aug-27 22:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:49:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:49:16 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-Aug-27 22:49:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:49:16 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Aug-27 22:49:16 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-Aug-27 22:49:16 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-27 22:49:16 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-27 22:49:16 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:49:16 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:49:16 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:49:16 LOG2 antvel: Parameters to Doppler: Topocentric 96556 2010 239 0.0 2010-Aug-27 22:49:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:49:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-27 22:49:16 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-27 22:49:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:49:16 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:49:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-27 22:49:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:49:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-Aug-27 22:49:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:49:16 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Aug-27 22:49:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-Aug-27 22:49:16 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.785770 2010.6569497046669 18.999933 2010-Aug-27 22:49:16 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222209 22.811555555555557 2010-Aug-27 22:49:16 LOG4 log_alfabeam: ALFABEAM 1 20.720101020697896 22.711861360312426 2010-Aug-27 22:49:16 LOG4 log_alfabeam: ALFABEAM 2 20.724046021245851 22.792696163424704 2010-Aug-27 22:49:16 LOG4 log_alfabeam: ALFABEAM 3 20.721508409175676 22.892894861065365 2010-Aug-27 22:49:16 LOG4 log_alfabeam: ALFABEAM 4 20.714783851957467 22.911025367062877 2010-Aug-27 22:49:16 LOG4 log_alfabeam: ALFABEAM 5 20.710825778590351 22.828508319419399 2010-Aug-27 22:49:16 LOG4 log_alfabeam: ALFABEAM 6 20.713604415595970 22.729569626472220 2010-Aug-27 22:49:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900165 2010-Aug-27 22:49:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:49:17 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Aug-27 22:49:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:49:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-27 22:49:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:49:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:49:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:49:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-27 22:49:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10158.00 2010-Aug-27 22:49:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:49:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:49:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:49:28 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Aug-27 22:49:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:49:28 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Aug-27 22:49:28 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-Aug-27 22:49:28 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-27 22:49:28 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-27 22:49:28 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:49:28 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:49:28 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:49:28 LOG2 antvel: Parameters to Doppler: Topocentric 96568 2010 239 0.0 2010-Aug-27 22:49:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:49:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-27 22:49:28 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-27 22:49:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:49:28 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:49:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-27 22:49:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:49:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-Aug-27 22:49:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:49:28 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Aug-27 22:49:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-Aug-27 22:49:28 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.789113 2010.6569500849239 18.999933 2010-Aug-27 22:49:28 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222277 22.811555555555557 2010-Aug-27 22:49:28 LOG4 log_alfabeam: ALFABEAM 1 20.720174554938453 22.712238140970815 2010-Aug-27 22:49:28 LOG4 log_alfabeam: ALFABEAM 2 20.724059704359139 22.793627613611370 2010-Aug-27 22:49:28 LOG4 log_alfabeam: ALFABEAM 3 20.721447906274978 22.893461421048720 2010-Aug-27 22:49:28 LOG4 log_alfabeam: ALFABEAM 4 20.714710495628843 22.910640610439156 2010-Aug-27 22:49:28 LOG4 log_alfabeam: ALFABEAM 5 20.710813686262387 22.827570338974635 2010-Aug-27 22:49:28 LOG4 log_alfabeam: ALFABEAM 6 20.713665009596870 22.729028060046598 2010-Aug-27 22:49:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900166 2010-Aug-27 22:49:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:49:29 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Aug-27 22:49:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:49:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-27 22:49:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:49:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:49:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:49:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-27 22:49:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10170.00 2010-Aug-27 22:49:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:49:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:49:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:49:40 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Aug-27 22:49:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:49:40 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Aug-27 22:49:40 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-Aug-27 22:49:40 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-27 22:49:40 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-27 22:49:40 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:49:40 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:49:40 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:49:40 LOG2 antvel: Parameters to Doppler: Topocentric 96580 2010 239 0.0 2010-Aug-27 22:49:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:49:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-27 22:49:40 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-27 22:49:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:49:40 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:49:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-27 22:49:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:49:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-Aug-27 22:49:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:49:40 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Aug-27 22:49:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-Aug-27 22:49:40 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.792455 2010.6569504651811 18.999933 2010-Aug-27 22:49:40 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222259 22.811555555555561 2010-Aug-27 22:49:40 LOG4 log_alfabeam: ALFABEAM 1 20.720247501335017 22.712623651957735 2010-Aug-27 22:49:40 LOG4 log_alfabeam: ALFABEAM 2 20.724072647514529 22.794557104284895 2010-Aug-27 22:49:40 LOG4 log_alfabeam: ALFABEAM 3 20.721387236617208 22.894017073541910 2010-Aug-27 22:49:40 LOG4 log_alfabeam: ALFABEAM 4 20.714637738722544 22.910247221032929 2010-Aug-27 22:49:40 LOG4 log_alfabeam: ALFABEAM 5 20.710802336584337 22.826634775837483 2010-Aug-27 22:49:40 LOG4 log_alfabeam: ALFABEAM 6 20.713725732751772 22.728497319997466 2010-Aug-27 22:49:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900167 2010-Aug-27 22:49:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:49:41 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Aug-27 22:49:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:49:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-27 22:49:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:49:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:49:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:49:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-27 22:49:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10182.00 2010-Aug-27 22:49:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:49:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:49:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:49:52 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Aug-27 22:49:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:49:52 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Aug-27 22:49:52 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2010-Aug-27 22:49:52 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Aug-27 22:49:52 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 22:49:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 22:49:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 22:49:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 22:49:52 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Aug-27 22:49:52 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 22:49:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 22:49:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 22:49:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 22:49:52 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Aug-27 22:49:52 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Aug-27 22:49:52 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-Aug-27 22:49:52 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-27 22:49:52 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-27 22:49:52 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:49:52 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:49:52 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:49:52 LOG2 antvel: Parameters to Doppler: Topocentric 96592 2010 239 0.0 2010-Aug-27 22:49:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:49:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-27 22:49:52 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-27 22:49:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:49:52 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:49:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-27 22:49:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:49:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-Aug-27 22:49:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:49:52 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-Aug-27 22:49:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-27 22:49:52 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.795798 2010.6569508454381 18.999933 2010-Aug-27 22:49:52 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222224 22.811555555555561 2010-Aug-27 22:49:52 LOG4 log_alfabeam: ALFABEAM 1 20.720319886747053 22.713017894357971 2010-Aug-27 22:49:52 LOG4 log_alfabeam: ALFABEAM 2 20.724084862879447 22.795484912546474 2010-Aug-27 22:49:52 LOG4 log_alfabeam: ALFABEAM 3 20.721326385706774 22.894562096826679 2010-Aug-27 22:49:52 LOG4 log_alfabeam: ALFABEAM 4 20.714565554233488 22.909845196807332 2010-Aug-27 22:49:53 LOG4 log_alfabeam: ALFABEAM 5 20.710791717308055 22.825701347515547 2010-Aug-27 22:49:53 LOG4 log_alfabeam: ALFABEAM 6 20.713786600012387 22.727977128287257 2010-Aug-27 22:49:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900168 2010-Aug-27 22:49:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:49:53 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-Aug-27 22:49:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:49:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-27 22:49:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:49:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:49:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:49:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-27 22:49:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10194.00 2010-Aug-27 22:49:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:49:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:49:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:50:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:50:04 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-Aug-27 22:50:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:50:04 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-Aug-27 22:50:04 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-Aug-27 22:50:04 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-27 22:50:04 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-27 22:50:04 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:50:04 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:50:04 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:50:04 LOG2 antvel: Parameters to Doppler: Topocentric 96604 2010 239 0.0 2010-Aug-27 22:50:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:50:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-27 22:50:04 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-27 22:50:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:50:04 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:50:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-27 22:50:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:50:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-Aug-27 22:50:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:50:04 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Aug-27 22:50:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-27 22:50:04 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.799140 2010.6569512256951 18.999933 2010-Aug-27 22:50:04 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222245 22.811555555555554 2010-Aug-27 22:50:04 LOG4 log_alfabeam: ALFABEAM 1 20.720391651816051 22.713420398064702 2010-Aug-27 22:50:04 LOG4 log_alfabeam: ALFABEAM 2 20.724096348161289 22.796410209576482 2010-Aug-27 22:50:04 LOG4 log_alfabeam: ALFABEAM 3 20.721265411619999 22.895096120966425 2010-Aug-27 22:50:04 LOG4 log_alfabeam: ALFABEAM 4 20.714494001131424 22.909435016100755 2010-Aug-27 22:50:04 LOG4 log_alfabeam: ALFABEAM 5 20.710781828752349 22.824770883900353 2010-Aug-27 22:50:04 LOG4 log_alfabeam: ALFABEAM 6 20.713847553755993 22.727467825691125 2010-Aug-27 22:50:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900169 2010-Aug-27 22:50:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:50:05 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Aug-27 22:50:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:50:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-27 22:50:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:50:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:50:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:50:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-27 22:50:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10206.00 2010-Aug-27 22:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:50:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:50:16 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Aug-27 22:50:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:50:16 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Aug-27 22:50:16 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-Aug-27 22:50:16 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-27 22:50:16 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-27 22:50:16 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:50:16 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:50:16 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:50:16 LOG2 antvel: Parameters to Doppler: Topocentric 96616 2010 239 0.0 2010-Aug-27 22:50:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:50:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-27 22:50:16 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-27 22:50:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:50:16 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:50:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-27 22:50:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:50:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-Aug-27 22:50:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:50:16 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Aug-27 22:50:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-27 22:50:16 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.802483 2010.6569516059521 18.999933 2010-Aug-27 22:50:16 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222245 22.811555555555557 2010-Aug-27 22:50:16 LOG4 log_alfabeam: ALFABEAM 1 20.720462824176138 22.713831165368791 2010-Aug-27 22:50:16 LOG4 log_alfabeam: ALFABEAM 2 20.724107115826317 22.797333280882793 2010-Aug-27 22:50:16 LOG4 log_alfabeam: ALFABEAM 3 20.721204299383100 22.895619431879311 2010-Aug-27 22:50:16 LOG4 log_alfabeam: ALFABEAM 4 20.714423051631048 22.909016675416840 2010-Aug-27 22:50:16 LOG4 log_alfabeam: ALFABEAM 5 20.710772658403165 22.823843093582461 2010-Aug-27 22:50:16 LOG4 log_alfabeam: ALFABEAM 6 20.713908609444740 22.726969127149037 2010-Aug-27 22:50:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900170 2010-Aug-27 22:50:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:50:17 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Aug-27 22:50:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:50:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-27 22:50:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:50:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:50:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:50:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-27 22:50:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10218.00 2010-Aug-27 22:50:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:50:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:50:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:50:28 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Aug-27 22:50:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:50:28 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Aug-27 22:50:28 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-Aug-27 22:50:28 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-27 22:50:28 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-27 22:50:28 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:50:28 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:50:28 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:50:28 LOG2 antvel: Parameters to Doppler: Topocentric 96628 2010 239 0.0 2010-Aug-27 22:50:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:50:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-27 22:50:28 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-27 22:50:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:50:28 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:50:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-27 22:50:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:50:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-Aug-27 22:50:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:50:28 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Aug-27 22:50:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-27 22:50:28 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.805825 2010.6569519862092 18.999933 2010-Aug-27 22:50:28 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222241 22.811555555555554 2010-Aug-27 22:50:28 LOG4 log_alfabeam: ALFABEAM 1 20.720533346694776 22.714249708257885 2010-Aug-27 22:50:28 LOG4 log_alfabeam: ALFABEAM 2 20.724117165577528 22.798253312028947 2010-Aug-27 22:50:28 LOG4 log_alfabeam: ALFABEAM 3 20.721143106869537 22.896131692889295 2010-Aug-27 22:50:28 LOG4 log_alfabeam: ALFABEAM 4 20.714352762445550 22.908590670494782 2010-Aug-27 22:50:28 LOG4 log_alfabeam: ALFABEAM 5 20.710764204616840 22.822918790512084 2010-Aug-27 22:50:28 LOG4 log_alfabeam: ALFABEAM 6 20.713969709774716 22.726481341076806 2010-Aug-27 22:50:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900171 2010-Aug-27 22:50:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:50:29 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-Aug-27 22:50:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:50:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-27 22:50:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:50:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:50:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:50:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-27 22:50:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10230.00 2010-Aug-27 22:50:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:50:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:50:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:50:40 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-Aug-27 22:50:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:50:40 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Aug-27 22:50:40 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-Aug-27 22:50:40 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-27 22:50:40 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-27 22:50:40 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:50:40 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:50:40 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:50:40 LOG2 antvel: Parameters to Doppler: Topocentric 96640 2010 239 0.0 2010-Aug-27 22:50:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:50:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-27 22:50:40 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-27 22:50:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:50:40 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:50:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-27 22:50:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:50:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-Aug-27 22:50:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:50:40 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Aug-27 22:50:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-27 22:50:40 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.809168 2010.6569523664664 18.999933 2010-Aug-27 22:50:40 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222234 22.811555555555554 2010-Aug-27 22:50:40 LOG4 log_alfabeam: ALFABEAM 1 20.720603247778502 22.714676031537543 2010-Aug-27 22:50:40 LOG4 log_alfabeam: ALFABEAM 2 20.724126510109617 22.799170597519815 2010-Aug-27 22:50:40 LOG4 log_alfabeam: ALFABEAM 3 20.721081818555145 22.896633196825235 2010-Aug-27 22:50:40 LOG4 log_alfabeam: ALFABEAM 4 20.714283105014399 22.908156995067269 2010-Aug-27 22:50:40 LOG4 log_alfabeam: ALFABEAM 5 20.710756454688397 22.821997673834630 2010-Aug-27 22:50:40 LOG4 log_alfabeam: ALFABEAM 6 20.714030870784516 22.726004176165489 2010-Aug-27 22:50:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900172 2010-Aug-27 22:50:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:50:41 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Aug-27 22:50:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:50:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-27 22:50:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:50:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:50:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:50:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-27 22:50:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10242.00 2010-Aug-27 22:50:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:50:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:50:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:50:52 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Aug-27 22:50:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:50:52 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Aug-27 22:50:52 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-Aug-27 22:50:52 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-27 22:50:52 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-27 22:50:52 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:50:52 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:50:52 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:50:52 LOG2 antvel: Parameters to Doppler: Topocentric 96652 2010 239 0.0 2010-Aug-27 22:50:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:50:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-27 22:50:52 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-27 22:50:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:50:52 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:50:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-27 22:50:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:50:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-Aug-27 22:50:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:50:52 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Aug-27 22:50:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-27 22:50:52 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.812510 2010.6569527467234 18.999933 2010-Aug-27 22:50:52 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222234 22.811555555555557 2010-Aug-27 22:50:52 LOG4 log_alfabeam: ALFABEAM 1 20.720672472581580 22.715109631740674 2010-Aug-27 22:50:52 LOG4 log_alfabeam: ALFABEAM 2 20.724135151019428 22.800084339073898 2010-Aug-27 22:50:52 LOG4 log_alfabeam: ALFABEAM 3 20.721020491941285 22.897123639599236 2010-Aug-27 22:50:52 LOG4 log_alfabeam: ALFABEAM 4 20.714214133737375 22.907716159807418 2010-Aug-27 22:50:52 LOG4 log_alfabeam: ALFABEAM 5 20.710749405122648 22.821080539868312 2010-Aug-27 22:50:52 LOG4 log_alfabeam: ALFABEAM 6 20.714092035649884 22.725537909250360 2010-Aug-27 22:50:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900173 2010-Aug-27 22:50:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:50:53 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Aug-27 22:50:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:50:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-27 22:50:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:50:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:50:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:50:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-27 22:50:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10254.00 2010-Aug-27 22:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:50:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:51:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:51:04 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Aug-27 22:51:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:51:04 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Aug-27 22:51:04 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-Aug-27 22:51:04 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-27 22:51:04 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-27 22:51:04 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:51:04 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:51:04 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:51:04 LOG2 antvel: Parameters to Doppler: Topocentric 96664 2010 239 0.0 2010-Aug-27 22:51:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:51:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-27 22:51:04 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-27 22:51:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:51:04 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:51:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-27 22:51:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:51:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-Aug-27 22:51:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:51:04 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Aug-27 22:51:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-27 22:51:04 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.815853 2010.6569531269804 18.999933 2010-Aug-27 22:51:04 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222238 22.811555555555547 2010-Aug-27 22:51:04 LOG4 log_alfabeam: ALFABEAM 1 20.720741050267598 22.715550517457824 2010-Aug-27 22:51:04 LOG4 log_alfabeam: ALFABEAM 2 20.724143101155370 22.800994840636122 2010-Aug-27 22:51:04 LOG4 log_alfabeam: ALFABEAM 3 20.720959110890053 22.897603320109287 2010-Aug-27 22:51:04 LOG4 log_alfabeam: ALFABEAM 4 20.714145819296196 22.907268154407738 2010-Aug-27 22:51:04 LOG4 log_alfabeam: ALFABEAM 5 20.710743043101562 22.820167077937665 2010-Aug-27 22:51:04 LOG4 log_alfabeam: ALFABEAM 6 20.714153221042551 22.725082243650306 2010-Aug-27 22:51:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900174 2010-Aug-27 22:51:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:51:05 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Aug-27 22:51:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:51:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-27 22:51:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:51:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:51:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:51:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-27 22:51:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10266.00 2010-Aug-27 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:51:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:51:16 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Aug-27 22:51:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:51:16 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Aug-27 22:51:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Aug-27 22:51:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 22:51:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 22:51:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 22:51:16 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Aug-27 22:51:16 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 22:51:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 22:51:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 22:51:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 22:51:16 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Aug-27 22:51:16 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-Aug-27 22:51:16 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-27 22:51:16 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-27 22:51:16 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:51:16 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:51:16 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:51:16 LOG2 antvel: Parameters to Doppler: Topocentric 96676 2010 239 0.0 2010-Aug-27 22:51:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:51:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-27 22:51:16 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-27 22:51:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:51:16 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:51:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-27 22:51:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:51:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-Aug-27 22:51:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:51:16 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-Aug-27 22:51:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-Aug-27 22:51:16 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.819195 2010.6569535072374 18.999933 2010-Aug-27 22:51:16 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222238 22.811555555555557 2010-Aug-27 22:51:16 LOG4 log_alfabeam: ALFABEAM 1 20.720808928318629 22.715998172198663 2010-Aug-27 22:51:16 LOG4 log_alfabeam: ALFABEAM 2 20.724150363898048 22.801901321642632 2010-Aug-27 22:51:16 LOG4 log_alfabeam: ALFABEAM 3 20.720897732372496 22.898071965983533 2010-Aug-27 22:51:16 LOG4 log_alfabeam: ALFABEAM 4 20.714078213739896 22.906813502033852 2010-Aug-27 22:51:16 LOG4 log_alfabeam: ALFABEAM 5 20.710737363396408 22.819258065256580 2010-Aug-27 22:51:16 LOG4 log_alfabeam: ALFABEAM 6 20.714214370766452 22.724637425582230 2010-Aug-27 22:51:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900175 2010-Aug-27 22:51:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:51:17 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-Aug-27 22:51:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:51:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-27 22:51:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:51:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:51:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:51:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-27 22:51:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10278.00 2010-Aug-27 22:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:51:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:51:28 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-Aug-27 22:51:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:51:28 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-Aug-27 22:51:28 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-Aug-27 22:51:28 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-27 22:51:28 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-27 22:51:28 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:51:28 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:51:28 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:51:28 LOG2 antvel: Parameters to Doppler: Topocentric 96688 2010 239 0.0 2010-Aug-27 22:51:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:51:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-27 22:51:28 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-27 22:51:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:51:28 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:51:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-27 22:51:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:51:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-Aug-27 22:51:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:51:28 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Aug-27 22:51:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-Aug-27 22:51:28 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.822538 2010.6569538874944 18.999933 2010-Aug-27 22:51:28 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222270 22.811555555555564 2010-Aug-27 22:51:28 LOG4 log_alfabeam: ALFABEAM 1 20.720876136628313 22.716452609550313 2010-Aug-27 22:51:28 LOG4 log_alfabeam: ALFABEAM 2 20.724156952172624 22.802804095772913 2010-Aug-27 22:51:28 LOG4 log_alfabeam: ALFABEAM 3 20.720836339583816 22.898529881251505 2010-Aug-27 22:51:28 LOG4 log_alfabeam: ALFABEAM 4 20.714011287021940 22.906352187131951 2010-Aug-27 22:51:28 LOG4 log_alfabeam: ALFABEAM 5 20.710732353155983 22.818353181106275 2010-Aug-27 22:51:28 LOG4 log_alfabeam: ALFABEAM 6 20.714275502173294 22.724203153953855 2010-Aug-27 22:51:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900176 2010-Aug-27 22:51:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:51:29 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Aug-27 22:51:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:51:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-27 22:51:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:51:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:51:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:51:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-27 22:51:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10290.00 2010-Aug-27 22:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:51:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:51:40 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Aug-27 22:51:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:51:40 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Aug-27 22:51:40 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-Aug-27 22:51:40 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-27 22:51:40 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-27 22:51:40 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:51:40 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:51:40 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:51:40 LOG2 antvel: Parameters to Doppler: Topocentric 96700 2010 239 0.0 2010-Aug-27 22:51:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:51:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-27 22:51:40 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-27 22:51:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:51:40 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:51:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-27 22:51:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:51:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-Aug-27 22:51:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:51:40 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Aug-27 22:51:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-Aug-27 22:51:40 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.825880 2010.6569542677516 18.999933 2010-Aug-27 22:51:40 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222224 22.811555555555557 2010-Aug-27 22:51:40 LOG4 log_alfabeam: ALFABEAM 1 20.720942625028862 22.716913302382991 2010-Aug-27 22:51:40 LOG4 log_alfabeam: ALFABEAM 2 20.724162871026820 22.803702401529677 2010-Aug-27 22:51:40 LOG4 log_alfabeam: ALFABEAM 3 20.720774988819343 22.898976824210070 2010-Aug-27 22:51:40 LOG4 log_alfabeam: ALFABEAM 4 20.713945088822047 22.905884742971985 2010-Aug-27 22:51:40 LOG4 log_alfabeam: ALFABEAM 5 20.710728005541306 22.817453182345105 2010-Aug-27 22:51:40 LOG4 log_alfabeam: ALFABEAM 6 20.714336559830855 22.723779645484669 2010-Aug-27 22:51:40 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900177 2010-Aug-27 22:51:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:51:41 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-Aug-27 22:51:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:51:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-27 22:51:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:51:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:51:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:51:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-27 22:51:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10302.00 2010-Aug-27 22:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:51:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:51:52 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-Aug-27 22:51:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:51:52 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Aug-27 22:51:52 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-Aug-27 22:51:52 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-27 22:51:52 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-27 22:51:52 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:51:52 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65695 J 2010-Aug-27 22:51:52 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:51:52 LOG2 antvel: Parameters to Doppler: Topocentric 96712 2010 239 0.0 2010-Aug-27 22:51:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:51:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-27 22:51:52 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-27 22:51:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:51:52 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:51:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-27 22:51:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:51:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-Aug-27 22:51:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:51:52 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Aug-27 22:51:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-Aug-27 22:51:52 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.829222 2010.6569546480087 18.999933 2010-Aug-27 22:51:52 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222263 22.811555555555554 2010-Aug-27 22:51:52 LOG4 log_alfabeam: ALFABEAM 1 20.721008404530277 22.717380129837309 2010-Aug-27 22:51:52 LOG4 log_alfabeam: ALFABEAM 2 20.724168131908051 22.804596295682053 2010-Aug-27 22:51:52 LOG4 log_alfabeam: ALFABEAM 3 20.720713680900417 22.899412974111655 2010-Aug-27 22:51:52 LOG4 log_alfabeam: ALFABEAM 4 20.713879607890970 22.905411290169486 2010-Aug-27 22:51:52 LOG4 log_alfabeam: ALFABEAM 5 20.710724308757946 22.816558005253238 2010-Aug-27 22:51:52 LOG4 log_alfabeam: ALFABEAM 6 20.714397543572659 22.723366717675290 2010-Aug-27 22:51:52 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900178 2010-Aug-27 22:51:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:51:53 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-Aug-27 22:51:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:51:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-27 22:51:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:51:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:51:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:51:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-27 22:51:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10314.00 2010-Aug-27 22:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:51:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:52:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:52:04 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-Aug-27 22:52:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:52:04 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Aug-27 22:52:04 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-Aug-27 22:52:04 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-27 22:52:04 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-27 22:52:04 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:52:04 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65696 J 2010-Aug-27 22:52:04 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:52:04 LOG2 antvel: Parameters to Doppler: Topocentric 96724 2010 239 0.0 2010-Aug-27 22:52:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:52:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-27 22:52:04 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-27 22:52:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:52:04 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:52:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-27 22:52:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:52:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-Aug-27 22:52:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:52:04 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Aug-27 22:52:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-Aug-27 22:52:04 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.832565 2010.6569550282657 18.999933 2010-Aug-27 22:52:04 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222241 22.811555555555564 2010-Aug-27 22:52:04 LOG4 log_alfabeam: ALFABEAM 1 20.721073486046620 22.717852978187789 2010-Aug-27 22:52:04 LOG4 log_alfabeam: ALFABEAM 2 20.724172745840086 22.805485837309423 2010-Aug-27 22:52:04 LOG4 log_alfabeam: ALFABEAM 3 20.720652416306038 22.899838505409974 2010-Aug-27 22:52:04 LOG4 log_alfabeam: ALFABEAM 4 20.713814833082619 22.904931942165799 2010-Aug-27 22:52:04 LOG4 log_alfabeam: ALFABEAM 5 20.710721251454061 22.815667583957250 2010-Aug-27 22:52:04 LOG4 log_alfabeam: ALFABEAM 6 20.714458453556560 22.722964193064485 2010-Aug-27 22:52:04 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900179 2010-Aug-27 22:52:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:52:05 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-Aug-27 22:52:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:52:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-27 22:52:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:52:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:52:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:52:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-27 22:52:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10326.00 2010-Aug-27 22:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:52:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:52:16 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-Aug-27 22:52:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:52:16 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Aug-27 22:52:16 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-Aug-27 22:52:16 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-27 22:52:16 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-27 22:52:16 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:52:16 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65696 J 2010-Aug-27 22:52:16 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:52:16 LOG2 antvel: Parameters to Doppler: Topocentric 96736 2010 239 0.0 2010-Aug-27 22:52:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:52:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-27 22:52:16 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-27 22:52:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:52:16 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:52:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-27 22:52:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:52:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-Aug-27 22:52:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:52:16 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Aug-27 22:52:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-Aug-27 22:52:16 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.835907 2010.6569554085227 18.999933 2010-Aug-27 22:52:16 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222209 22.811555555555547 2010-Aug-27 22:52:16 LOG4 log_alfabeam: ALFABEAM 1 20.721137822938740 22.718331308649933 2010-Aug-27 22:52:16 LOG4 log_alfabeam: ALFABEAM 2 20.724176720143440 22.806370295573601 2010-Aug-27 22:52:16 LOG4 log_alfabeam: ALFABEAM 3 20.720591250075685 22.900253220118177 2010-Aug-27 22:52:16 LOG4 log_alfabeam: ALFABEAM 4 20.713750810526534 22.904447243086281 2010-Aug-27 22:52:16 LOG4 log_alfabeam: ALFABEAM 5 20.710718824613899 22.814782642917571 2010-Aug-27 22:52:16 LOG4 log_alfabeam: ALFABEAM 6 20.714519235720182 22.722572246514822 2010-Aug-27 22:52:16 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900180 2010-Aug-27 22:52:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:52:17 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Aug-27 22:52:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:52:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-27 22:52:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:52:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:52:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:52:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-27 22:52:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10338.00 2010-Aug-27 22:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:52:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:52:28 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Aug-27 22:52:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:52:28 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Aug-27 22:52:28 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-Aug-27 22:52:28 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-27 22:52:28 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-27 22:52:28 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:52:28 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65696 J 2010-Aug-27 22:52:28 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:52:28 LOG2 antvel: Parameters to Doppler: Topocentric 96748 2010 239 0.0 2010-Aug-27 22:52:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:52:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-27 22:52:28 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-27 22:52:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:52:28 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:52:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-27 22:52:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:52:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-Aug-27 22:52:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-27 22:52:28 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Aug-27 22:52:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-Aug-27 22:52:28 LOG5 log_alfabeam: Parameters: 20.71747222222222 22.811555555555557 20.839250 2010.6569557887797 18.999933 2010-Aug-27 22:52:28 LOG4 log_alfabeam: ALFABEAM 0 20.717472222222220 22.811555555555557 2010-Aug-27 22:52:28 LOG4 log_alfabeam: ALFABEAM 1 20.721201446737901 22.718815152059737 2010-Aug-27 22:52:28 LOG4 log_alfabeam: ALFABEAM 2 20.724180067595142 22.807250008822333 2010-Aug-27 22:52:28 LOG4 log_alfabeam: ALFABEAM 3 20.720530163570746 22.900657430545575 2010-Aug-27 22:52:28 LOG4 log_alfabeam: ALFABEAM 4 20.713687508552383 22.903957159551158 2010-Aug-27 22:52:28 LOG4 log_alfabeam: ALFABEAM 5 20.710717015651127 22.813902836302262 2010-Aug-27 22:52:28 LOG4 log_alfabeam: ALFABEAM 6 20.714579909252876 22.722190570479828 2010-Aug-27 22:52:28 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23900181 2010-Aug-27 22:52:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-27 22:52:29 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-Aug-27 22:52:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-27 22:52:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 22:52:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:52:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:52:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:52:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-27 22:52:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10350.00 2010-Aug-27 22:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 22:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 22:52:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 22:52:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-27 22:52:40 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-Aug-27 22:52:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-27 22:52:40 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Aug-27 22:52:40 INFO2 smartfreq: Switching off CAL 2010-Aug-27 22:52:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 22:52:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 22:52:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 22:52:40 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Aug-27 22:52:40 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 22:52:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 22:52:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 22:52:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 22:52:40 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Aug-27 22:52:40 INFO3 restore_frequencies: Restoring original frequencies 2010-Aug-27 22:52:40 LOG5 antvel: Calling 'antvel 204302.900000 224841.600000 J Topocentric 0' 2010-Aug-27 22:52:40 LOG2 antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65696 J 2010-Aug-27 22:52:40 LOG2 antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:52:40 LOG2 antvel: Parameters to Doppler: Topocentric 96760 2010 239 0.0 2010-Aug-27 22:52:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:52:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-Aug-27 22:52:40 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-Aug-27 22:52:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 22:52:40 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 22:52:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-27 22:52:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:52:40 STOP finish_task: Finishing task 'smart frequency switching' 2010-Aug-27 22:52:40 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-27 22:52:40 DONE finish_task: DONE finished pattern: smart frequency switching 2010-Aug-27 22:52:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-27 22:52:40 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2010-Aug-27 22:52:40 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-27 22:52:40 NOTE run_command_file: DONE with command file processing 2010-Aug-27 22:52:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Aug-27 22:52:41 STOP finish_task: Finishing task 'running command file 'command_galfasrc_aug10.cmd'' 2010-Aug-27 22:52:41 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-27 22:52:41 DONE finish_task: DONE finished running: command file 'command_galfasrc_aug10.cmd' 2010-Aug-27 22:52:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-27 22:52:41 END end_task: Finishing task 'running command file 'command_galfasrc_aug10.cmd'' with status 'OK' 2010-Aug-27 22:52:41 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-27 22:52:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-27 22:52:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:52:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:52:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:53:03 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Aug-27 22:53:03 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Aug-27 22:53:03 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Aug-27 22:53:03 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Aug-27 22:53:03 LOG5 begin_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2010-Aug-27 22:53:03 NOTE restart_wapp: Restarting all WAPPs 2010-Aug-27 22:53:03 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Aug-27 22:53:03 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Aug-27 22:53:03 LOG5 end_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2010-Aug-27 22:53:03 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-27 22:53:03 LOG3 exec_msg: Closing socket 2010-Aug-27 22:53:03 LOG3 exec_msg: Closing socket 2010-Aug-27 22:53:03 LOG3 exec_msg: Closing socket 2010-Aug-27 22:53:03 LOG3 exec_msg: Closing socket 2010-Aug-27 22:53:06 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Aug-27 22:53:06 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Aug-27 22:53:06 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Aug-27 22:53:06 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Aug-27 22:53:28 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2010.conf' 2010-Aug-27 22:53:29 LOG2 CIMA-antvel: Precessing RA = 20:43:02.9 Dec = +22:48:41.6 Epoch = 2010.65696 J 2010-Aug-27 22:53:29 LOG2 CIMA-antvel: Computed apparent RA = 20:43:33.3 Dec = +22:51:14.1 2010-Aug-27 22:53:29 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 96809 2010 239 0.0 2010-Aug-27 22:53:29 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 22:53:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Aug-27 22:53:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Aug-27 22:53:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Aug-27 22:53:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Aug-27 22:53:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Aug-27 22:53:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-Aug-27 22:53:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Aug-27 22:53:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Aug-27 22:53:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Aug-27 22:53:30 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Aug-27 22:53:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Aug-27 22:53:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Aug-27 22:53:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-27 22:53:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-27 22:53:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-27 22:53:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-27 22:53:31 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2010-Aug-27 22:53:31 LOG4 exec_msg: From OBSERVER: config_iflo 2010-Aug-27 22:53:31 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Aug-27 22:53:31 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2010-Aug-27 22:53:31 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Aug-27 22:53:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Aug-27 22:53:31 LOG1 config_iflo: Receiver ALFA already selected 2010-Aug-27 22:53:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 22:53:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 22:53:31 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 22:53:31 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Aug-27 22:53:31 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 22:53:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 22:53:31 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Aug-27 22:53:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 22:53:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 22:53:31 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Aug-27 22:53:31 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Aug-27 22:53:31 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Aug-27 22:53:31 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Aug-27 22:53:31 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Aug-27 22:53:31 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Aug-27 22:53:31 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Aug-27 22:53:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-27 22:53:31 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Aug-27 22:53:31 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Aug-27 22:53:31 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Aug-27 22:53:31 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Aug-27 22:53:31 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Aug-27 22:53:31 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Aug-27 22:53:31 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Aug-27 22:53:31 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Aug-27 22:53:31 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Aug-27 22:53:31 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Aug-27 22:53:31 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Aug-27 22:53:31 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Aug-27 22:53:31 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Aug-27 22:53:31 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Aug-27 22:53:31 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Aug-27 22:53:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:53:31 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Aug-27 22:53:31 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Aug-27 22:53:31 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Aug-27 22:53:31 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Aug-27 22:53:31 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Aug-27 22:53:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Aug-27 22:53:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 22:53:31 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Aug-27 22:53:31 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-Aug-27 22:53:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-27 22:53:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Aug-27 22:53:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 22:53:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 22:53:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:53:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:53:31 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-Aug-27 22:53:31 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Aug-27 22:53:31 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-Aug-27 22:53:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Aug-27 22:53:31 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Aug-27 22:53:31 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2010-Aug-27 22:53:31 DONE finish_task: DONE finished configuration: IF/LO path 2010-Aug-27 22:53:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-27 22:53:31 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Aug-27 22:53:31 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2010-Aug-27 22:53:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:53:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Aug-27 22:53:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Aug-27 22:53:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Aug-27 22:53:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Aug-27 22:53:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Aug-27 22:53:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Aug-27 22:53:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Aug-27 22:53:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Aug-27 22:53:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-27 22:53:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-27 22:53:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-27 22:53:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-27 22:53:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Aug-27 22:53:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Aug-27 22:53:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Aug-27 22:53:32 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2010-Aug-27 22:53:32 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2010-Aug-27 22:53:32 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Aug-27 22:53:32 LOG5 begin_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Aug-27 22:53:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Aug-27 22:53:32 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Aug-27 22:53:32 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Aug-27 22:53:32 START begin_task: Starting task 'selecting calibration port' 2010-Aug-27 22:53:32 LOG5 begin_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2010-Aug-27 22:53:32 LOG3 vw_send: To DATATAKING: calport 3 2010-Aug-27 22:53:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Aug-27 22:53:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 22:53:32 START begin_task: Starting task 'waiting on calport' 2010-Aug-27 22:53:32 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Aug-27 22:53:32 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2010-Aug-27 22:53:32 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Aug-27 22:53:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 22:53:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:53:32 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 22:53:32 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Aug-27 22:53:32 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Aug-27 22:53:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Aug-27 22:53:32 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Aug-27 22:53:32 LOG5 end_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2010-Aug-27 22:53:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 22:53:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 22:53:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 22:53:32 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2010-Aug-27 22:53:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:53:33 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 22:53:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 22:53:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 22:53:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 22:53:33 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2010-Aug-27 22:53:33 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Aug-27 22:53:33 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Aug-27 22:53:33 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Aug-27 22:53:33 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Aug-27 22:53:33 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Aug-27 22:53:33 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Aug-27 22:53:33 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Aug-27 22:53:33 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Aug-27 22:53:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 22:53:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 22:53:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 22:53:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 22:53:33 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Aug-27 22:53:33 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Aug-27 22:53:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 22:53:33 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2010-Aug-27 22:53:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Aug-27 22:53:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Aug-27 22:53:33 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 22:53:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 22:53:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 22:53:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 22:53:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 22:53:33 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2010-Aug-27 22:53:33 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Aug-27 22:53:33 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Aug-27 22:53:33 LOG5 finish_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Aug-27 22:53:33 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Aug-27 22:53:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-27 22:53:33 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Aug-27 22:53:33 LOG5 end_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Aug-27 22:53:33 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-27 22:53:33 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2010-Aug-27 22:53:33 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2010-Aug-27 22:53:33 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-27 22:53:33 LOG5 begin_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Aug-27 22:53:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-27 22:53:33 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-27 22:53:33 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Aug-27 22:53:33 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-27 22:53:33 LOG5 finish_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Aug-27 22:53:33 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-27 22:53:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-27 22:53:33 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-27 22:53:33 LOG5 end_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Aug-27 22:53:34 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2010.conf' applied. 2010-Aug-27 22:53:34 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-27 22:53:34 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-27 22:55:15 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2010-Aug-27 22:55:15 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift92p2 210000.0 +222312 J 0 Topocentric velocity(optical) 2010-Aug-27 22:55:15 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift92p2 210000.0 +222312 J 0 Topocentric velocity(optical)' 2010-Aug-27 22:55:15 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Aug-27 22:55:15 LOG5 begin_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2010-Aug-27 22:55:15 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'Cur-pos' 2010-Aug-27 22:55:15 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Aug-27 22:55:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift92p2} 2010-Aug-27 22:55:15 INFO5 fixed_driftmap: Start: year = 2010.6569610806905 RA = 21:00:30.8 Dec = +22:25:56.0 2010-Aug-27 22:55:15 NOTE fixed_driftmap: Setting ZA to 4:04:42.3 ... 2010-Aug-27 22:55:15 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 4.08 2010-Aug-27 22:55:15 LOG3 track_source: Calling 'track_source drift92p2 180.0 4.0784087246 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-Aug-27 22:55:15 START begin_task: Starting task 'sending tracking commands' 2010-Aug-27 22:55:15 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Aug-27 22:55:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift92p2} INFO {Slewing to source 'drift92p2' ...} 2010-Aug-27 22:55:16 INFO1 track_source: Starting to track drift92p2 2010-Aug-27 22:55:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift92p2" 2010-Aug-27 22:55:16 LOG3 vw_send: To DATATAKING: set ra 180.0 2010-Aug-27 22:55:16 LOG3 vw_send: To DATATAKING: set dec 4.0784087246 2010-Aug-27 22:55:16 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-27 22:55:16 LOG3 vw_send: To DATATAKING: pnt tr 180.0 4.0784087246 -CF 2010-Aug-27 22:55:16 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-27 22:55:16 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-27 22:55:16 LOG5 finish_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Aug-27 22:55:16 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-27 22:55:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 22:55:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-27 22:55:16 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Aug-27 22:55:16 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-27 22:55:16 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Aug-27 22:55:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-27 22:55:16 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-27 22:55:16 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2010-Aug-27 22:55:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Aug-27 22:55:16 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Aug-27 22:55:16 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2010-Aug-27 22:55:16 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift92p2" 2010-Aug-27 22:55:16 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2010-Aug-27 22:55:16 LOG4 got_cormsg: From DATATAKING: set dec 4.0784087246 2010-Aug-27 22:55:16 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2010-Aug-27 22:55:16 LOG4 got_cormsg: From DATATAKING: vw% 4.0784087246 2010-Aug-27 22:55:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:55:16 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-27 22:55:16 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 4.0784087246 -CF 2010-Aug-27 22:55:16 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-27 22:55:16 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-27 22:55:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:55:17 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-27 22:55:17 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-27 22:55:17 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Aug-27 22:55:17 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2010-Aug-27 22:55:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-27 22:55:17 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-27 22:55:17 LOG5 finish_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Aug-27 22:55:17 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-27 22:55:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 22:55:17 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-27 22:55:17 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Aug-27 22:55:17 START begin_task: Starting task 'waiting on telescope' 2010-Aug-27 22:55:17 LOG5 begin_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Aug-27 22:55:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-27 22:55:17 LOG3 waittrk: Start waittrk 5 2010-Aug-27 22:55:17 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-27 22:55:17 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-Aug-27 22:55:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-27 22:55:22 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-Aug-27 22:55:22 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-27 22:55:22 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2010-Aug-27 22:56:32 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-27 22:56:32 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2010-Aug-27 22:56:32 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-27 22:56:32 INFO2 waittrk: Now tracking drift92p2 2010-Aug-27 22:56:32 LOG4 waittrk: Current telescope position: Az = 179.74 ZA = 4.10 2010-Aug-27 22:56:32 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-27 22:56:32 LOG5 finish_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Aug-27 22:56:32 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-27 22:56:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 22:56:32 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-27 22:56:32 LOG5 end_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Aug-27 22:56:32 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 22:56:32 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2010-Aug-27 22:56:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 22:56:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 22:56:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 22:56:32 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 22:56:32 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2010-Aug-27 22:56:32 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 22:56:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 22:56:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:56:32 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 22:56:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 22:56:32 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2010-Aug-27 22:56:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 22:56:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 22:56:32 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 22:56:32 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 22:56:32 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-Aug-27 22:56:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 22:56:33 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 22:56:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 22:56:33 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-Aug-27 22:56:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 22:56:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 22:56:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 22:56:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 22:56:33 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 22:56:33 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-Aug-27 22:56:33 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 22:56:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 22:56:33 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-Aug-27 22:56:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 22:56:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 22:56:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 22:56:33 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2010-Aug-27 22:56:33 LOG4 send_obs_status: To obs_status: <1> INFO {Waiting until one minute before start time} 2010-Aug-27 22:56:33 INFO2 astwait: Waiting for 303 seconds from 02:56:33 to 03:01:36 UTC ... 2010-Aug-27 22:56:33 LOG4 send_obs_status: To obs_status: <1> TASKTIME 303 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Aug-27 22:56:33 START begin_task: Starting task 'waiting on waiting for AST time' 2010-Aug-27 22:56:33 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Aug-27 23:01:36 STOP end_task: Finishing task 'waiting on waiting for AST time' with status 'OK' 2010-Aug-27 23:01:36 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Aug-27 23:01:36 INFO3 astwait: Finished waiting 2010-Aug-27 23:01:36 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Aug-27 23:01:36 LOG5 dopset_later: Calling 'dopset_later 60.846751689580991' 2010-Aug-27 23:01:36 INFO3 dopset_later: Setting Doppler correction for 23:02:36 (60.8 seconds from now) 2010-Aug-27 23:01:36 LOG5 antvel: Calling 'antvel 180.000000 4.078409 F Topocentric 60.846751689580991' 2010-Aug-27 23:01:36 LOG2 antvel: Transforming current Az = 180.00 ZA = 4.08 to apparent RA = 21:00:30.6 Dec = +22:25:56.0 2010-Aug-27 23:01:36 LOG2 antvel: Parameters to Doppler: Topocentric 97356 2010 239 0.0 2010-Aug-27 23:01:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-27 23:01:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-Aug-27 23:01:36 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-Aug-27 23:01:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-27 23:01:36 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-27 23:01:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-27 23:01:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 23:01:36 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-27 23:01:36 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2010-Aug-27 23:01:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Aug-27 23:01:36 INFO2 adjust_power: Starting to adjust WAPP power 2010-Aug-27 23:01:36 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Aug-27 23:01:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Aug-27 23:01:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 23:01:36 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Aug-27 23:01:36 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-Aug-27 23:01:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-27 23:01:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-27 23:01:36 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Aug-27 23:01:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 23:01:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:01:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:01:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:01:39 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 23:01:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Aug-27 23:01:39 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-Aug-27 23:01:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Aug-27 23:01:39 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-27 23:01:39 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-Aug-27 23:01:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Aug-27 23:01:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-27 23:01:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-27 23:01:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-27 23:01:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-27 23:01:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Aug-27 23:01:39 LOG5 begin_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2010-Aug-27 23:01:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:01:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Aug-27 23:01:40 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2010-Aug-27 23:01:40 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 5 dB 2010-Aug-27 23:01:40 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 3 dB --- beam 3: 3 3 dB 2010-Aug-27 23:01:40 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2010-Aug-27 23:01:40 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Aug-27 23:01:40 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Aug-27 23:01:40 LOG5 end_task: Level: (4) ID = <10124> Status = 0 0 0 0 ok 2010-Aug-27 23:01:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.118 0.889 ALFA beam 1: 0.903 0.958 2010-Aug-27 23:01:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.957 1.092 ALFA beam 3: 1.013 0.929 2010-Aug-27 23:01:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.030 0.839 ALFA beam 5: 1.044 1.079 2010-Aug-27 23:01:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.059 0.812 ALFA beam 7: 0.933 0.960 2010-Aug-27 23:01:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-27 23:01:40 LOG5 finish_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-Aug-27 23:01:40 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Aug-27 23:01:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 23:01:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-27 23:01:40 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-Aug-27 23:01:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 23:01:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-27 23:01:40 LOG5 finish_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2010-Aug-27 23:01:40 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Aug-27 23:01:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 23:01:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-27 23:01:40 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2010-Aug-27 23:01:40 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 21:00:30.8 LST = 20:59:34.8 diff = 56.0 secs 2010-Aug-27 23:01:40 INFO2 fixed_driftmap: Waiting 54 seconds for RA 21:00:31 2010-Aug-27 23:01:40 INFO2 lstwait: Waiting for 53.9 secs from LST 20:59:35 to LST 21:00:29 ... 2010-Aug-27 23:01:40 LOG4 send_obs_status: To obs_status: <1> TASKTIME 53.851104899506339 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Aug-27 23:01:40 START begin_task: Starting task 'waiting on wait on LST' 2010-Aug-27 23:01:40 LOG5 begin_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2010-Aug-27 23:02:34 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Aug-27 23:02:34 LOG5 end_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2010-Aug-27 23:02:34 LOG4 lstwait: Finished waiting 0.15 seconds late 2010-Aug-27 23:02:34 INFO3 lstwait: Finished waiting 2010-Aug-27 23:02:34 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Aug-27 23:02:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:02:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:02:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:02:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:02:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2010-Aug-27 23:02:34 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Aug-27 23:02:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 23:02:34 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 23:02:34 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 23:02:34 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2010-Aug-27 23:02:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 23:02:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 23:02:34 INFO2 take_data: Starting WAPP 600-second scan: 23900182 2010-Aug-27 23:02:35 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 23:02:35 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-Aug-27 23:02:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 23:02:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 23:02:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0033.fits 2010-Aug-27 23:02:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0033.fits} 2010-Aug-27 23:02:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 23:02:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10956.00 2010-Aug-27 23:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 23:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:02:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:07:36 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 23:07:36.295 (seconds: 83256.295)!} 2010-Aug-27 23:07:36 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 23:07:36.295 (seconds: 83256.295)! 2010-Aug-27 23:07:37 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 83255.0 to 83256.0! 2010-Aug-27 23:07:38 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (83255.0 - 83257.0)! 2010-Aug-27 23:12:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 23:12:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 23:12:36 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-Aug-27 23:12:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 23:12:36 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2010-Aug-27 23:12:36 LOG1 fixed_driftmap: New position: year = 2010.6569940679899 RA = 21:10:02.6 RA/Dec = 21:10:33.7 +22:26:02.4 2010-Aug-27 23:12:36 NOTE fixed_driftmap: Correcting ZA to 4:04:48.7 ... 2010-Aug-27 23:12:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0801978203 -CF 2010-Aug-27 23:12:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 23:12:36 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 23:12:36 LOG5 begin_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2010-Aug-27 23:12:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 23:12:36 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 23:12:36 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Aug-27 23:12:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 23:12:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 23:12:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 23:12:36 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 23:12:36 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2010-Aug-27 23:12:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0801978203 -CF 2010-Aug-27 23:12:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:12:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 23:12:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 23:12:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:12:36 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 23:12:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 23:12:36 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2010-Aug-27 23:12:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 23:12:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 23:12:36 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 23:12:36 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 23:12:36 LOG5 begin_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2010-Aug-27 23:12:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:12:37 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 23:12:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 23:12:37 LOG5 end_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2010-Aug-27 23:12:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 23:12:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 23:12:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 23:12:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 23:12:37 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 23:12:37 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2010-Aug-27 23:12:37 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 23:12:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 23:12:37 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2010-Aug-27 23:12:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 23:12:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 23:12:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 23:12:37 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Aug-27 23:12:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 23:12:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 23:12:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 23:12:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 23:12:37 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2010-Aug-27 23:12:37 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 23:12:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 23:12:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 23:12:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 23:12:37 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2010-Aug-27 23:12:37 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 23:12:37 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 23:12:37 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-Aug-27 23:12:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 23:12:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 23:12:37 INFO2 take_data: Starting WAPP 1-second scan: 23900183 2010-Aug-27 23:12:37 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 23:12:37 LOG5 begin_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-Aug-27 23:12:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 23:12:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 23:12:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11558.00 2010-Aug-27 23:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 23:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:12:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:12:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 23:12:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 23:12:39 LOG5 end_task: Level: (4) ID = <10135> Status = 0 0 0 0 ok 2010-Aug-27 23:12:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 23:12:39 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-Aug-27 23:12:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 23:12:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 23:12:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 23:12:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 23:12:39 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2010-Aug-27 23:12:39 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 23:12:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 23:12:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 23:12:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 23:12:39 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2010-Aug-27 23:12:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 23:12:40 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 23:12:40 LOG5 finish_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2010-Aug-27 23:12:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 23:12:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 23:12:40 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 23:12:40 LOG5 end_task: Level: (2) ID = <10128> Status = 0 0 0 0 ok 2010-Aug-27 23:12:40 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2010-Aug-27 23:12:40 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Aug-27 23:12:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:12:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:12:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:12:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:12:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 23:12:40 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 23:12:40 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 23:12:40 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2010-Aug-27 23:12:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 23:12:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 23:12:40 INFO2 take_data: Starting WAPP 600-second scan: 23900184 2010-Aug-27 23:12:40 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 23:12:40 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2010-Aug-27 23:12:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 23:12:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 23:12:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 23:12:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11561.00 2010-Aug-27 23:12:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0034.fits 2010-Aug-27 23:12:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0034.fits} 2010-Aug-27 23:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 23:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:12:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:22:35 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 23:22:35.297 (seconds: 84155.297)!} 2010-Aug-27 23:22:35 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 23:22:35.297 (seconds: 84155.297)! 2010-Aug-27 23:22:36 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 84154.0 to 84155.0! 2010-Aug-27 23:22:37 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (84154.0 - 84156.0)! 2010-Aug-27 23:22:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 23:22:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 23:22:41 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2010-Aug-27 23:22:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 23:22:41 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2010-Aug-27 23:22:41 LOG1 fixed_driftmap: New position: year = 2010.6570132392831 RA = 21:20:09.1 RA/Dec = 21:20:40.3 +22:26:08.6 2010-Aug-27 23:22:41 NOTE fixed_driftmap: Correcting ZA to 4:04:54.9 ... 2010-Aug-27 23:22:41 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0819097683 -CF 2010-Aug-27 23:22:41 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 23:22:41 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 23:22:41 LOG5 begin_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2010-Aug-27 23:22:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 23:22:41 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 23:22:41 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Aug-27 23:22:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 23:22:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 23:22:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 23:22:41 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 23:22:41 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-Aug-27 23:22:41 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0819097683 -CF 2010-Aug-27 23:22:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:22:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 23:22:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 23:22:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:22:42 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 23:22:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 23:22:42 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-Aug-27 23:22:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 23:22:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 23:22:42 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 23:22:42 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 23:22:42 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2010-Aug-27 23:22:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:22:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 23:22:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 23:22:42 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2010-Aug-27 23:22:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 23:22:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 23:22:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 23:22:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 23:22:42 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 23:22:42 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2010-Aug-27 23:22:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 23:22:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 23:22:42 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2010-Aug-27 23:22:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 23:22:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 23:22:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 23:22:42 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Aug-27 23:22:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 23:22:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 23:22:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 23:22:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 23:22:42 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Aug-27 23:22:42 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 23:22:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 23:22:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 23:22:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 23:22:42 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Aug-27 23:22:42 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 23:22:42 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 23:22:42 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Aug-27 23:22:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 23:22:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 23:22:42 INFO2 take_data: Starting WAPP 1-second scan: 23900185 2010-Aug-27 23:22:43 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 23:22:43 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-Aug-27 23:22:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 23:22:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 23:22:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12164.00 2010-Aug-27 23:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 23:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:22:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:22:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 23:22:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 23:22:45 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-Aug-27 23:22:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 23:22:45 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Aug-27 23:22:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 23:22:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 23:22:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 23:22:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 23:22:45 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2010-Aug-27 23:22:45 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 23:22:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 23:22:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 23:22:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 23:22:45 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2010-Aug-27 23:22:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 23:22:45 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 23:22:45 LOG5 finish_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2010-Aug-27 23:22:45 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 23:22:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 23:22:45 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 23:22:45 LOG5 end_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2010-Aug-27 23:22:45 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2010-Aug-27 23:22:45 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2010-Aug-27 23:22:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:22:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:22:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:22:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:22:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 23:22:46 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 23:22:46 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 23:22:46 LOG5 begin_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2010-Aug-27 23:22:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 23:22:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 23:22:46 INFO2 take_data: Starting WAPP 600-second scan: 23900186 2010-Aug-27 23:22:46 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 23:22:46 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2010-Aug-27 23:22:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 23:22:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 23:22:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 23:22:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12167.00 2010-Aug-27 23:22:46 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0035.fits 2010-Aug-27 23:22:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0035.fits} 2010-Aug-27 23:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 23:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:22:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:32:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 23:32:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 23:32:47 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2010-Aug-27 23:32:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 23:32:47 LOG5 end_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2010-Aug-27 23:32:47 LOG1 fixed_driftmap: New position: year = 2010.6570324422642 RA = 21:30:16.5 RA/Dec = 21:30:48.0 +22:26:14.4 2010-Aug-27 23:32:47 NOTE fixed_driftmap: Correcting ZA to 4:05:00.7 ... 2010-Aug-27 23:32:47 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0835325779 -CF 2010-Aug-27 23:32:47 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 23:32:47 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 23:32:47 LOG5 begin_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2010-Aug-27 23:32:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 23:32:47 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 23:32:47 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2010-Aug-27 23:32:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 23:32:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 23:32:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 23:32:47 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 23:32:47 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-Aug-27 23:32:47 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0835325779 -CF 2010-Aug-27 23:32:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:32:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 23:32:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 23:32:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:32:47 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 23:32:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 23:32:47 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-Aug-27 23:32:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 23:32:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 23:32:48 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 23:32:48 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 23:32:48 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2010-Aug-27 23:32:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:32:48 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 23:32:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 23:32:48 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2010-Aug-27 23:32:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 23:32:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 23:32:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 23:32:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 23:32:48 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 23:32:48 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2010-Aug-27 23:32:48 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 23:32:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 23:32:48 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2010-Aug-27 23:32:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 23:32:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 23:32:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 23:32:48 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2010-Aug-27 23:32:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 23:32:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 23:32:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 23:32:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 23:32:48 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-Aug-27 23:32:48 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 23:32:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 23:32:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 23:32:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 23:32:48 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-Aug-27 23:32:48 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 23:32:48 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 23:32:48 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-Aug-27 23:32:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 23:32:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 23:32:48 INFO2 take_data: Starting WAPP 1-second scan: 23900187 2010-Aug-27 23:32:48 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 23:32:48 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-Aug-27 23:32:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 23:32:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 23:32:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12769.00 2010-Aug-27 23:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 23:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:32:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 23:32:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 23:32:50 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-Aug-27 23:32:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 23:32:50 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-Aug-27 23:32:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 23:32:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 23:32:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 23:32:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 23:32:50 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-Aug-27 23:32:50 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 23:32:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 23:32:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 23:32:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 23:32:50 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-Aug-27 23:32:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 23:32:50 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 23:32:50 LOG5 finish_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2010-Aug-27 23:32:50 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 23:32:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 23:32:50 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 23:32:50 LOG5 end_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2010-Aug-27 23:32:50 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2010-Aug-27 23:32:50 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2010-Aug-27 23:32:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:32:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:32:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:32:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:32:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 23:32:51 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 23:32:51 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 23:32:51 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2010-Aug-27 23:32:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 23:32:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 23:32:51 INFO2 take_data: Starting WAPP 600-second scan: 23900188 2010-Aug-27 23:32:51 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 23:32:51 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2010-Aug-27 23:32:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 23:32:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 23:32:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 23:32:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12772.00 2010-Aug-27 23:32:51 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0036.fits 2010-Aug-27 23:32:51 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0036.fits} 2010-Aug-27 23:32:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 23:32:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:32:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:32:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:32:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:32:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:32:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:32:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:32:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:42:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 23:42:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 23:42:52 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2010-Aug-27 23:42:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 23:42:52 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2010-Aug-27 23:42:52 LOG1 fixed_driftmap: New position: year = 2010.6570516135573 RA = 21:40:23.0 RA/Dec = 21:40:54.6 +22:26:19.9 2010-Aug-27 23:42:52 NOTE fixed_driftmap: Correcting ZA to 4:05:06.2 ... 2010-Aug-27 23:42:52 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0850577361 -CF 2010-Aug-27 23:42:52 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 23:42:52 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 23:42:52 LOG5 begin_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2010-Aug-27 23:42:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 23:42:52 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 23:42:52 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Aug-27 23:42:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 23:42:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 23:42:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 23:42:52 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 23:42:52 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-Aug-27 23:42:52 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0850577361 -CF 2010-Aug-27 23:42:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:42:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 23:42:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 23:42:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:42:52 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 23:42:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 23:42:52 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-Aug-27 23:42:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 23:42:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 23:42:52 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 23:42:52 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 23:42:52 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-Aug-27 23:42:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:42:53 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 23:42:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 23:42:53 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-Aug-27 23:42:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 23:42:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 23:42:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 23:42:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 23:42:53 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 23:42:53 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2010-Aug-27 23:42:53 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 23:42:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 23:42:53 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2010-Aug-27 23:42:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 23:42:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 23:42:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 23:42:53 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Aug-27 23:42:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 23:42:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 23:42:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 23:42:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 23:42:53 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-Aug-27 23:42:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 23:42:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 23:42:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 23:42:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 23:42:53 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-Aug-27 23:42:53 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 23:42:53 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 23:42:53 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-Aug-27 23:42:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 23:42:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 23:42:53 INFO2 take_data: Starting WAPP 1-second scan: 23900189 2010-Aug-27 23:42:53 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 23:42:53 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2010-Aug-27 23:42:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 23:42:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 23:42:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13374.00 2010-Aug-27 23:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 23:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:42:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:42:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 23:42:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 23:42:55 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2010-Aug-27 23:42:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 23:42:55 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-Aug-27 23:42:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 23:42:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 23:42:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 23:42:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 23:42:55 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Aug-27 23:42:55 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 23:42:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 23:42:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 23:42:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 23:42:55 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Aug-27 23:42:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 23:42:55 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 23:42:55 LOG5 finish_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2010-Aug-27 23:42:55 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 23:42:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 23:42:55 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 23:42:55 LOG5 end_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2010-Aug-27 23:42:55 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2010-Aug-27 23:42:55 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2010-Aug-27 23:42:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:42:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:42:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:42:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:42:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 23:42:56 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 23:42:56 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 23:42:56 LOG5 begin_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2010-Aug-27 23:42:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 23:42:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 23:42:56 INFO2 take_data: Starting WAPP 600-second scan: 23900190 2010-Aug-27 23:42:56 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 23:42:56 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2010-Aug-27 23:42:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 23:42:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 23:42:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 23:42:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13377.00 2010-Aug-27 23:42:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0037.fits 2010-Aug-27 23:42:56 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0037.fits} 2010-Aug-27 23:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 23:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:42:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:52:33 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 23:52:33.301 (seconds: 85953.301)!} 2010-Aug-27 23:52:33 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 23:52:33.301 (seconds: 85953.301)! 2010-Aug-27 23:52:34 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 85952.0 to 85953.0! 2010-Aug-27 23:52:35 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (85952.0 - 85954.0)! 2010-Aug-27 23:52:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 23:52:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 23:52:57 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2010-Aug-27 23:52:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 23:52:57 LOG5 end_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2010-Aug-27 23:52:57 LOG1 fixed_driftmap: New position: year = 2010.6570707848505 RA = 21:50:29.4 RA/Dec = 21:51:01.3 +22:26:25.0 2010-Aug-27 23:52:57 NOTE fixed_driftmap: Correcting ZA to 4:05:11.3 ... 2010-Aug-27 23:52:57 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0864850442 -CF 2010-Aug-27 23:52:57 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 23:52:57 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 23:52:57 LOG5 begin_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2010-Aug-27 23:52:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 23:52:57 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 23:52:57 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Aug-27 23:52:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 23:52:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 23:52:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 23:52:57 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 23:52:57 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Aug-27 23:52:57 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0864850442 -CF 2010-Aug-27 23:52:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:52:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 23:52:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 23:52:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:52:57 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 23:52:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 23:52:57 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Aug-27 23:52:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 23:52:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 23:52:57 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 23:52:57 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 23:52:57 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2010-Aug-27 23:52:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 23:52:58 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 23:52:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 23:52:58 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2010-Aug-27 23:52:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 23:52:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 23:52:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 23:52:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 23:52:58 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 23:52:58 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2010-Aug-27 23:52:58 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 23:52:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 23:52:58 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2010-Aug-27 23:52:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 23:52:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 23:52:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 23:52:58 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Aug-27 23:52:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 23:52:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 23:52:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 23:52:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 23:52:58 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Aug-27 23:52:58 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 23:52:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 23:52:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 23:52:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 23:52:58 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Aug-27 23:52:59 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 23:52:59 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 23:52:59 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-Aug-27 23:52:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 23:52:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 23:52:59 INFO2 take_data: Starting WAPP 1-second scan: 23900191 2010-Aug-27 23:52:59 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 23:52:59 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2010-Aug-27 23:52:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 23:52:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 23:52:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13980.00 2010-Aug-27 23:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 23:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:53:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:53:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 23:53:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 23:53:01 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2010-Aug-27 23:53:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 23:53:01 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-Aug-27 23:53:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 23:53:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 23:53:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 23:53:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 23:53:01 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2010-Aug-27 23:53:01 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 23:53:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 23:53:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 23:53:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 23:53:01 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2010-Aug-27 23:53:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 23:53:01 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 23:53:01 LOG5 finish_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2010-Aug-27 23:53:01 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 23:53:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 23:53:01 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 23:53:01 LOG5 end_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2010-Aug-27 23:53:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2010-Aug-27 23:53:01 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2010-Aug-27 23:53:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:53:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:53:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:53:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 23:53:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 23:53:02 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 23:53:02 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 23:53:02 LOG5 begin_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2010-Aug-27 23:53:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 23:53:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 23:53:02 INFO2 take_data: Starting WAPP 600-second scan: 23900192 2010-Aug-27 23:53:02 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 23:53:02 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2010-Aug-27 23:53:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 23:53:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 23:53:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 23:53:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13983.00 2010-Aug-27 23:53:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0038.fits 2010-Aug-27 23:53:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0038.fits} 2010-Aug-27 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 23:53:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:00:16 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 55436.166829 to 55436.166840! 2010-Aug-28 00:00:17 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (55436.166829 - 55436.166852)! 2010-Aug-28 00:03:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 00:03:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 00:03:03 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2010-Aug-28 00:03:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 00:03:03 LOG5 end_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2010-Aug-28 00:03:03 LOG1 fixed_driftmap: New position: year = 2010.6570899878318 RA = 22:00:36.8 RA/Dec = 22:01:09.0 +22:26:29.8 2010-Aug-28 00:03:03 NOTE fixed_driftmap: Correcting ZA to 4:05:16.1 ... 2010-Aug-28 00:03:03 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0878138132 -CF 2010-Aug-28 00:03:03 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-28 00:03:03 START begin_task: Starting task 'WAPP calibration' 2010-Aug-28 00:03:03 LOG5 begin_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2010-Aug-28 00:03:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-28 00:03:03 START begin_task: Starting task 'selecting calibration type' 2010-Aug-28 00:03:03 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Aug-28 00:03:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-28 00:03:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-28 00:03:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 00:03:03 START begin_task: Starting task 'waiting on setcal' 2010-Aug-28 00:03:03 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-Aug-28 00:03:03 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0878138132 -CF 2010-Aug-28 00:03:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:03:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-28 00:03:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 00:03:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:03:03 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-28 00:03:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-28 00:03:03 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-Aug-28 00:03:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-28 00:03:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 00:03:03 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-28 00:03:03 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 00:03:03 LOG5 begin_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2010-Aug-28 00:03:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:03:04 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 00:03:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 00:03:04 LOG5 end_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2010-Aug-28 00:03:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 00:03:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-28 00:03:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 00:03:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-28 00:03:04 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 00:03:04 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2010-Aug-28 00:03:04 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 00:03:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 00:03:04 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2010-Aug-28 00:03:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 00:03:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-28 00:03:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-28 00:03:04 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Aug-28 00:03:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-28 00:03:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-28 00:03:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-28 00:03:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 00:03:04 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Aug-28 00:03:04 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 00:03:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-28 00:03:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 00:03:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 00:03:04 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Aug-28 00:03:04 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-28 00:03:04 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 00:03:04 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-Aug-28 00:03:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-28 00:03:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 00:03:04 INFO2 take_data: Starting WAPP 1-second scan: 24000001 2010-Aug-28 00:03:04 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 00:03:04 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2010-Aug-28 00:03:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 00:03:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-28 00:03:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14585.00 2010-Aug-28 00:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 00:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:03:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:03:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 00:03:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 00:03:06 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2010-Aug-28 00:03:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 00:03:06 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-Aug-28 00:03:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-28 00:03:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-28 00:03:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-28 00:03:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 00:03:06 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2010-Aug-28 00:03:06 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 00:03:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-28 00:03:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 00:03:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 00:03:06 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2010-Aug-28 00:03:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-28 00:03:06 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-28 00:03:06 LOG5 finish_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2010-Aug-28 00:03:06 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-28 00:03:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-28 00:03:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-28 00:03:06 LOG5 end_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2010-Aug-28 00:03:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2010-Aug-28 00:03:06 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2010-Aug-28 00:03:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:03:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:03:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:03:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:03:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-28 00:03:07 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-28 00:03:07 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 00:03:07 LOG5 begin_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2010-Aug-28 00:03:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-28 00:03:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 00:03:07 INFO2 take_data: Starting WAPP 600-second scan: 24000002 2010-Aug-28 00:03:07 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 00:03:07 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Aug-28 00:03:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-28 00:03:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 00:03:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-28 00:03:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14588.00 2010-Aug-28 00:03:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20100828.a2010.0000.fits 2010-Aug-28 00:03:07 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100828.a2010.0000.fits} 2010-Aug-28 00:03:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 00:03:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:03:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:03:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:03:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:03:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:03:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:03:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:03:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:07:32 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 00:07:32.302 (seconds: 452.302)!} 2010-Aug-28 00:07:32 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 00:07:32.302 (seconds: 452.302)! 2010-Aug-28 00:07:33 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 451.0 to 452.0! 2010-Aug-28 00:07:34 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (451.0 - 453.0)! 2010-Aug-28 00:13:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 00:13:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 00:13:08 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Aug-28 00:13:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 00:13:08 LOG5 end_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2010-Aug-28 00:13:08 LOG1 fixed_driftmap: New position: year = 2010.657109159125 RA = 22:10:43.2 RA/Dec = 22:11:15.6 +22:26:34.2 2010-Aug-28 00:13:08 NOTE fixed_driftmap: Correcting ZA to 4:05:20.5 ... 2010-Aug-28 00:13:08 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0890370960 -CF 2010-Aug-28 00:13:08 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-28 00:13:08 START begin_task: Starting task 'WAPP calibration' 2010-Aug-28 00:13:08 LOG5 begin_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2010-Aug-28 00:13:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-28 00:13:08 START begin_task: Starting task 'selecting calibration type' 2010-Aug-28 00:13:08 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Aug-28 00:13:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-28 00:13:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-28 00:13:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 00:13:08 START begin_task: Starting task 'waiting on setcal' 2010-Aug-28 00:13:08 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2010-Aug-28 00:13:08 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0890370960 -CF 2010-Aug-28 00:13:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:13:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-28 00:13:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 00:13:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:13:08 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-28 00:13:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-28 00:13:08 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2010-Aug-28 00:13:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-28 00:13:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 00:13:08 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-28 00:13:08 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 00:13:08 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2010-Aug-28 00:13:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:13:09 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 00:13:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 00:13:09 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2010-Aug-28 00:13:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 00:13:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-28 00:13:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 00:13:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-28 00:13:09 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 00:13:09 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2010-Aug-28 00:13:09 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 00:13:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 00:13:09 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2010-Aug-28 00:13:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 00:13:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-28 00:13:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-28 00:13:09 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Aug-28 00:13:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-28 00:13:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-28 00:13:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-28 00:13:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 00:13:09 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2010-Aug-28 00:13:09 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 00:13:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-28 00:13:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 00:13:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 00:13:09 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2010-Aug-28 00:13:09 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-28 00:13:09 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 00:13:09 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2010-Aug-28 00:13:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-28 00:13:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 00:13:09 INFO2 take_data: Starting WAPP 1-second scan: 24000003 2010-Aug-28 00:13:09 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 00:13:09 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2010-Aug-28 00:13:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 00:13:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-28 00:13:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15190.00 2010-Aug-28 00:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 00:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:13:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:13:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 00:13:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 00:13:11 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2010-Aug-28 00:13:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 00:13:11 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2010-Aug-28 00:13:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-28 00:13:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-28 00:13:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-28 00:13:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 00:13:11 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2010-Aug-28 00:13:11 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 00:13:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-28 00:13:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 00:13:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 00:13:11 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2010-Aug-28 00:13:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-28 00:13:11 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-28 00:13:11 LOG5 finish_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2010-Aug-28 00:13:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-28 00:13:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-28 00:13:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-28 00:13:11 LOG5 end_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2010-Aug-28 00:13:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2010-Aug-28 00:13:11 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2010-Aug-28 00:13:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:13:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:13:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:13:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:13:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-28 00:13:12 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-28 00:13:12 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 00:13:12 LOG5 begin_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2010-Aug-28 00:13:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-28 00:13:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 00:13:12 INFO2 take_data: Starting WAPP 600-second scan: 24000004 2010-Aug-28 00:13:12 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 00:13:12 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2010-Aug-28 00:13:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-28 00:13:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 00:13:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-28 00:13:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15193.00 2010-Aug-28 00:13:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20100828.a2010.0001.fits 2010-Aug-28 00:13:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100828.a2010.0001.fits} 2010-Aug-28 00:13:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 00:13:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:13:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:13:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:13:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:13:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:13:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:13:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:13:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:22:31 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 00:22:31.304 (seconds: 1351.304)!} 2010-Aug-28 00:22:31 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 00:22:31.304 (seconds: 1351.304)! 2010-Aug-28 00:22:32 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 1350.0 to 1351.0! 2010-Aug-28 00:22:33 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (1350.0 - 1352.0)! 2010-Aug-28 00:23:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 00:23:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 00:23:13 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2010-Aug-28 00:23:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 00:23:13 LOG5 end_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2010-Aug-28 00:23:13 LOG1 fixed_driftmap: New position: year = 2010.6571283304181 RA = 22:20:49.7 RA/Dec = 22:21:22.3 +22:26:38.3 2010-Aug-28 00:23:13 NOTE fixed_driftmap: Correcting ZA to 4:05:24.6 ... 2010-Aug-28 00:23:13 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0901547719 -CF 2010-Aug-28 00:23:13 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-28 00:23:13 START begin_task: Starting task 'WAPP calibration' 2010-Aug-28 00:23:13 LOG5 begin_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2010-Aug-28 00:23:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-28 00:23:13 START begin_task: Starting task 'selecting calibration type' 2010-Aug-28 00:23:13 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Aug-28 00:23:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-28 00:23:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-28 00:23:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 00:23:13 START begin_task: Starting task 'waiting on setcal' 2010-Aug-28 00:23:13 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2010-Aug-28 00:23:13 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0901547719 -CF 2010-Aug-28 00:23:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:23:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-28 00:23:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 00:23:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:23:13 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-28 00:23:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-28 00:23:13 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2010-Aug-28 00:23:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-28 00:23:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 00:23:13 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-28 00:23:13 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 00:23:13 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2010-Aug-28 00:23:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:23:14 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 00:23:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 00:23:14 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2010-Aug-28 00:23:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 00:23:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-28 00:23:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 00:23:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-28 00:23:14 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 00:23:14 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2010-Aug-28 00:23:14 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 00:23:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 00:23:14 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2010-Aug-28 00:23:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 00:23:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-28 00:23:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-28 00:23:14 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Aug-28 00:23:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-28 00:23:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-28 00:23:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-28 00:23:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 00:23:14 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Aug-28 00:23:14 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 00:23:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-28 00:23:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 00:23:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 00:23:14 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Aug-28 00:23:14 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-28 00:23:14 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 00:23:14 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2010-Aug-28 00:23:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-28 00:23:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 00:23:14 INFO2 take_data: Starting WAPP 1-second scan: 24000005 2010-Aug-28 00:23:14 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 00:23:14 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2010-Aug-28 00:23:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 00:23:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-28 00:23:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15795.00 2010-Aug-28 00:23:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 00:23:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:23:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:23:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:23:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:23:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:23:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:23:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:23:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:23:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 00:23:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 00:23:16 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2010-Aug-28 00:23:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 00:23:16 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2010-Aug-28 00:23:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-28 00:23:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-28 00:23:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-28 00:23:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 00:23:16 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2010-Aug-28 00:23:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 00:23:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-28 00:23:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 00:23:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 00:23:17 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2010-Aug-28 00:23:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-28 00:23:17 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-28 00:23:17 LOG5 finish_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2010-Aug-28 00:23:17 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-28 00:23:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-28 00:23:17 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-28 00:23:17 LOG5 end_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2010-Aug-28 00:23:17 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2010-Aug-28 00:23:17 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2010-Aug-28 00:23:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:23:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:23:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:23:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:23:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-28 00:23:17 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-28 00:23:17 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 00:23:17 LOG5 begin_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2010-Aug-28 00:23:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-28 00:23:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 00:23:17 INFO2 take_data: Starting WAPP 600-second scan: 24000006 2010-Aug-28 00:23:17 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 00:23:17 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2010-Aug-28 00:23:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-28 00:23:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 00:23:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-28 00:23:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15798.00 2010-Aug-28 00:23:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20100828.a2010.0002.fits 2010-Aug-28 00:23:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100828.a2010.0002.fits} 2010-Aug-28 00:23:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 00:23:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:23:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:23:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:23:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:23:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:23:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:23:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:23:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:33:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 00:33:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 00:33:18 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2010-Aug-28 00:33:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 00:33:18 LOG5 end_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2010-Aug-28 00:33:18 LOG1 fixed_driftmap: New position: year = 2010.6571475017113 RA = 22:30:56.1 RA/Dec = 22:31:28.9 +22:26:41.9 2010-Aug-28 00:33:18 NOTE fixed_driftmap: Correcting ZA to 4:05:28.2 ... 2010-Aug-28 00:33:18 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0911646803 -CF 2010-Aug-28 00:33:18 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-28 00:33:18 START begin_task: Starting task 'WAPP calibration' 2010-Aug-28 00:33:18 LOG5 begin_task: Level: (2) ID = <10216> Status = 0 0 0 0 ok 2010-Aug-28 00:33:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-28 00:33:18 START begin_task: Starting task 'selecting calibration type' 2010-Aug-28 00:33:18 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-Aug-28 00:33:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-28 00:33:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-28 00:33:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 00:33:18 START begin_task: Starting task 'waiting on setcal' 2010-Aug-28 00:33:18 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2010-Aug-28 00:33:18 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0911646803 -CF 2010-Aug-28 00:33:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:33:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-28 00:33:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 00:33:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:33:19 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-28 00:33:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-28 00:33:19 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2010-Aug-28 00:33:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-28 00:33:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 00:33:19 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-28 00:33:19 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 00:33:19 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2010-Aug-28 00:33:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:33:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 00:33:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 00:33:19 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2010-Aug-28 00:33:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 00:33:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-28 00:33:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 00:33:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-28 00:33:19 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 00:33:19 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2010-Aug-28 00:33:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 00:33:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 00:33:19 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2010-Aug-28 00:33:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 00:33:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-28 00:33:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-28 00:33:19 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-Aug-28 00:33:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-28 00:33:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-28 00:33:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-28 00:33:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 00:33:19 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Aug-28 00:33:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 00:33:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-28 00:33:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 00:33:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 00:33:19 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Aug-28 00:33:19 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-28 00:33:19 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 00:33:19 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2010-Aug-28 00:33:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-28 00:33:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 00:33:19 INFO2 take_data: Starting WAPP 1-second scan: 24000007 2010-Aug-28 00:33:20 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 00:33:20 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2010-Aug-28 00:33:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 00:33:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-28 00:33:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16401.00 2010-Aug-28 00:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 00:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:33:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:33:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 00:33:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 00:33:22 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2010-Aug-28 00:33:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 00:33:22 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2010-Aug-28 00:33:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-28 00:33:22 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-28 00:33:22 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-28 00:33:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 00:33:22 LOG5 begin_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2010-Aug-28 00:33:22 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 00:33:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-28 00:33:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 00:33:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 00:33:22 LOG5 end_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2010-Aug-28 00:33:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-28 00:33:22 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-28 00:33:22 LOG5 finish_task: Level: (2) ID = <10216> Status = 0 0 0 0 ok 2010-Aug-28 00:33:22 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-28 00:33:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-28 00:33:22 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-28 00:33:22 LOG5 end_task: Level: (2) ID = <10216> Status = 0 0 0 0 ok 2010-Aug-28 00:33:22 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2010-Aug-28 00:33:22 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2010-Aug-28 00:33:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:33:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:33:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:33:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:33:23 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-28 00:33:23 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-28 00:33:23 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 00:33:23 LOG5 begin_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2010-Aug-28 00:33:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-28 00:33:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 00:33:23 INFO2 take_data: Starting WAPP 600-second scan: 24000008 2010-Aug-28 00:33:23 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 00:33:23 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2010-Aug-28 00:33:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-28 00:33:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 00:33:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-28 00:33:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16404.00 2010-Aug-28 00:33:23 NOTE WAPPDATA-new_file: New FITS file: wapp.20100828.a2010.0003.fits 2010-Aug-28 00:33:23 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100828.a2010.0003.fits} 2010-Aug-28 00:33:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 00:33:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:33:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:33:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:33:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:33:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:33:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:33:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:33:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:37:30 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 00:37:30.296 (seconds: 2250.296)!} 2010-Aug-28 00:37:30 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 00:37:30.296 (seconds: 2250.296)! 2010-Aug-28 00:37:31 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 2249.0 to 2250.0! 2010-Aug-28 00:37:32 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (2249.0 - 2251.0)! 2010-Aug-28 00:43:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 00:43:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 00:43:24 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2010-Aug-28 00:43:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 00:43:24 LOG5 end_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2010-Aug-28 00:43:24 LOG1 fixed_driftmap: New position: year = 2010.6571667046924 RA = 22:41:03.5 RA/Dec = 22:41:36.6 +22:26:45.1 2010-Aug-28 00:43:24 NOTE fixed_driftmap: Correcting ZA to 4:05:31.4 ... 2010-Aug-28 00:43:24 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0920662491 -CF 2010-Aug-28 00:43:24 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-28 00:43:24 START begin_task: Starting task 'WAPP calibration' 2010-Aug-28 00:43:24 LOG5 begin_task: Level: (2) ID = <10227> Status = 0 0 0 0 ok 2010-Aug-28 00:43:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-28 00:43:24 START begin_task: Starting task 'selecting calibration type' 2010-Aug-28 00:43:24 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Aug-28 00:43:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-28 00:43:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-28 00:43:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 00:43:24 START begin_task: Starting task 'waiting on setcal' 2010-Aug-28 00:43:24 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2010-Aug-28 00:43:24 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0920662491 -CF 2010-Aug-28 00:43:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:43:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-28 00:43:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 00:43:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:43:24 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-28 00:43:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-28 00:43:24 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2010-Aug-28 00:43:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-28 00:43:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 00:43:24 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-28 00:43:24 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 00:43:24 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2010-Aug-28 00:43:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:43:25 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 00:43:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 00:43:25 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2010-Aug-28 00:43:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 00:43:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-28 00:43:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 00:43:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-28 00:43:25 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 00:43:25 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2010-Aug-28 00:43:25 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 00:43:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 00:43:25 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2010-Aug-28 00:43:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 00:43:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-28 00:43:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-28 00:43:25 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Aug-28 00:43:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-28 00:43:25 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-28 00:43:25 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-28 00:43:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 00:43:25 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Aug-28 00:43:25 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 00:43:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-28 00:43:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 00:43:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 00:43:25 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Aug-28 00:43:25 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-28 00:43:25 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 00:43:25 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2010-Aug-28 00:43:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-28 00:43:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 00:43:25 INFO2 take_data: Starting WAPP 1-second scan: 24000009 2010-Aug-28 00:43:25 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 00:43:25 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2010-Aug-28 00:43:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 00:43:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17006.00 2010-Aug-28 00:43:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-28 00:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 00:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:43:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 00:43:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 00:43:27 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2010-Aug-28 00:43:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 00:43:27 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2010-Aug-28 00:43:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-28 00:43:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-28 00:43:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-28 00:43:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 00:43:27 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2010-Aug-28 00:43:28 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 00:43:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-28 00:43:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 00:43:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 00:43:28 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2010-Aug-28 00:43:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-28 00:43:28 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-28 00:43:28 LOG5 finish_task: Level: (2) ID = <10227> Status = 0 0 0 0 ok 2010-Aug-28 00:43:28 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-28 00:43:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-28 00:43:28 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-28 00:43:28 LOG5 end_task: Level: (2) ID = <10227> Status = 0 0 0 0 ok 2010-Aug-28 00:43:28 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2010-Aug-28 00:43:28 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2010-Aug-28 00:43:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:43:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:43:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:43:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:43:28 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-28 00:43:28 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-28 00:43:28 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 00:43:28 LOG5 begin_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2010-Aug-28 00:43:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-28 00:43:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 00:43:28 INFO2 take_data: Starting WAPP 600-second scan: 24000010 2010-Aug-28 00:43:28 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 00:43:28 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2010-Aug-28 00:43:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-28 00:43:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 00:43:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-28 00:43:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17009.00 2010-Aug-28 00:43:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20100828.a2010.0004.fits 2010-Aug-28 00:43:28 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100828.a2010.0004.fits} 2010-Aug-28 00:43:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 00:43:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:43:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:43:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:43:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:43:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:43:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:43:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:43:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:52:29 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 00:52:29.297 (seconds: 3149.297)!} 2010-Aug-28 00:52:29 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 00:52:29.297 (seconds: 3149.297)! 2010-Aug-28 00:52:30 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 3148.0 to 3149.0! 2010-Aug-28 00:52:31 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (3148.0 - 3150.0)! 2010-Aug-28 00:53:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 00:53:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 00:53:29 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2010-Aug-28 00:53:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 00:53:29 LOG5 end_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2010-Aug-28 00:53:29 LOG1 fixed_driftmap: New position: year = 2010.6571858759855 RA = 22:51:09.9 RA/Dec = 22:51:43.3 +22:26:48.0 2010-Aug-28 00:53:29 NOTE fixed_driftmap: Correcting ZA to 4:05:34.3 ... 2010-Aug-28 00:53:29 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0928547488 -CF 2010-Aug-28 00:53:29 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-28 00:53:29 START begin_task: Starting task 'WAPP calibration' 2010-Aug-28 00:53:29 LOG5 begin_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2010-Aug-28 00:53:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-28 00:53:29 START begin_task: Starting task 'selecting calibration type' 2010-Aug-28 00:53:29 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Aug-28 00:53:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-28 00:53:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-28 00:53:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 00:53:29 START begin_task: Starting task 'waiting on setcal' 2010-Aug-28 00:53:29 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2010-Aug-28 00:53:29 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0928547488 -CF 2010-Aug-28 00:53:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:53:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-28 00:53:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 00:53:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:53:30 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-28 00:53:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-28 00:53:30 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2010-Aug-28 00:53:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-28 00:53:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 00:53:30 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-28 00:53:30 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 00:53:30 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2010-Aug-28 00:53:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 00:53:30 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 00:53:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 00:53:30 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2010-Aug-28 00:53:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 00:53:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-28 00:53:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 00:53:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-28 00:53:30 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 00:53:30 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2010-Aug-28 00:53:30 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 00:53:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 00:53:30 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2010-Aug-28 00:53:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 00:53:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-28 00:53:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-28 00:53:30 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Aug-28 00:53:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-28 00:53:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-28 00:53:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-28 00:53:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 00:53:30 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2010-Aug-28 00:53:30 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 00:53:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-28 00:53:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 00:53:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 00:53:30 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2010-Aug-28 00:53:30 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-28 00:53:30 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 00:53:30 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2010-Aug-28 00:53:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-28 00:53:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 00:53:30 INFO2 take_data: Starting WAPP 1-second scan: 24000011 2010-Aug-28 00:53:31 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 00:53:31 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2010-Aug-28 00:53:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 00:53:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-28 00:53:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17612.00 2010-Aug-28 00:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 00:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:53:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:53:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 00:53:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 00:53:33 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2010-Aug-28 00:53:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 00:53:33 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2010-Aug-28 00:53:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-28 00:53:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-28 00:53:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-28 00:53:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 00:53:33 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2010-Aug-28 00:53:33 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 00:53:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-28 00:53:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 00:53:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 00:53:33 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2010-Aug-28 00:53:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-28 00:53:33 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-28 00:53:33 LOG5 finish_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2010-Aug-28 00:53:33 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-28 00:53:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-28 00:53:33 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-28 00:53:33 LOG5 end_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2010-Aug-28 00:53:33 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2010-Aug-28 00:53:33 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2010-Aug-28 00:53:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:53:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:53:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:53:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-28 00:53:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-28 00:53:34 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-28 00:53:34 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 00:53:34 LOG5 begin_task: Level: (2) ID = <10247> Status = 0 0 0 0 ok 2010-Aug-28 00:53:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-28 00:53:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 00:53:34 INFO2 take_data: Starting WAPP 600-second scan: 24000012 2010-Aug-28 00:53:34 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 00:53:34 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2010-Aug-28 00:53:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-28 00:53:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 00:53:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-28 00:53:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17615.00 2010-Aug-28 00:53:34 NOTE WAPPDATA-new_file: New FITS file: wapp.20100828.a2010.0005.fits 2010-Aug-28 00:53:34 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100828.a2010.0005.fits} 2010-Aug-28 00:53:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 00:53:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:53:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:53:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:53:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:53:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:53:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:53:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 00:53:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:03:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 01:03:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 01:03:35 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2010-Aug-28 01:03:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 01:03:35 LOG5 end_task: Level: (2) ID = <10247> Status = 0 0 0 0 ok 2010-Aug-28 01:03:35 LOG1 fixed_driftmap: New position: year = 2010.6572050789669 RA = 23:01:17.3 RA/Dec = 23:01:50.9 +22:26:50.4 2010-Aug-28 01:03:35 NOTE fixed_driftmap: Correcting ZA to 4:05:36.7 ... 2010-Aug-28 01:03:35 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0935312473 -CF 2010-Aug-28 01:03:35 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-28 01:03:35 START begin_task: Starting task 'WAPP calibration' 2010-Aug-28 01:03:35 LOG5 begin_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2010-Aug-28 01:03:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-28 01:03:35 START begin_task: Starting task 'selecting calibration type' 2010-Aug-28 01:03:35 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2010-Aug-28 01:03:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-28 01:03:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-28 01:03:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 01:03:35 START begin_task: Starting task 'waiting on setcal' 2010-Aug-28 01:03:35 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2010-Aug-28 01:03:35 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0935312473 -CF 2010-Aug-28 01:03:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:03:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-28 01:03:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 01:03:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:03:35 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-28 01:03:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-28 01:03:35 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2010-Aug-28 01:03:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-28 01:03:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 01:03:35 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-28 01:03:35 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 01:03:35 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2010-Aug-28 01:03:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:03:36 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 01:03:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 01:03:36 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2010-Aug-28 01:03:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 01:03:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-28 01:03:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 01:03:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-28 01:03:36 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 01:03:36 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2010-Aug-28 01:03:36 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 01:03:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 01:03:36 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2010-Aug-28 01:03:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 01:03:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-28 01:03:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-28 01:03:36 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2010-Aug-28 01:03:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-28 01:03:36 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-28 01:03:36 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-28 01:03:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 01:03:36 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2010-Aug-28 01:03:36 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 01:03:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-28 01:03:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 01:03:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 01:03:36 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2010-Aug-28 01:03:36 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-28 01:03:36 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 01:03:36 LOG5 begin_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2010-Aug-28 01:03:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-28 01:03:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 01:03:36 INFO2 take_data: Starting WAPP 1-second scan: 24000013 2010-Aug-28 01:03:36 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 01:03:36 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2010-Aug-28 01:03:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 01:03:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-28 01:03:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18217.00 2010-Aug-28 01:03:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 01:03:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:03:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:03:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:03:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:03:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:03:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:03:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:03:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:03:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 01:03:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 01:03:38 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2010-Aug-28 01:03:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 01:03:38 LOG5 end_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2010-Aug-28 01:03:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-28 01:03:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-28 01:03:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-28 01:03:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 01:03:38 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2010-Aug-28 01:03:38 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 01:03:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-28 01:03:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 01:03:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 01:03:38 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2010-Aug-28 01:03:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-28 01:03:38 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-28 01:03:38 LOG5 finish_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2010-Aug-28 01:03:38 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-28 01:03:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-28 01:03:38 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-28 01:03:38 LOG5 end_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2010-Aug-28 01:03:38 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2010-Aug-28 01:03:38 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2010-Aug-28 01:03:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:03:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:03:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:03:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:03:39 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-28 01:03:39 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-28 01:03:39 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 01:03:39 LOG5 begin_task: Level: (2) ID = <10258> Status = 0 0 0 0 ok 2010-Aug-28 01:03:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-28 01:03:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 01:03:39 INFO2 take_data: Starting WAPP 600-second scan: 24000014 2010-Aug-28 01:03:39 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 01:03:39 LOG5 begin_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2010-Aug-28 01:03:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-28 01:03:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 01:03:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-28 01:03:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18220.00 2010-Aug-28 01:03:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20100828.a2010.0006.fits 2010-Aug-28 01:03:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100828.a2010.0006.fits} 2010-Aug-28 01:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 01:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:03:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:07:28 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 01:07:28.297 (seconds: 4048.297)!} 2010-Aug-28 01:07:28 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 01:07:28.297 (seconds: 4048.297)! 2010-Aug-28 01:07:29 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 4047.0 to 4048.0! 2010-Aug-28 01:07:30 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (4047.0 - 4049.0)! 2010-Aug-28 01:13:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 01:13:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 01:13:40 LOG5 end_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2010-Aug-28 01:13:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 01:13:40 LOG5 end_task: Level: (2) ID = <10258> Status = 0 0 0 0 ok 2010-Aug-28 01:13:40 LOG1 fixed_driftmap: New position: year = 2010.65722425026 RA = 23:11:23.7 RA/Dec = 23:11:57.6 +22:26:52.4 2010-Aug-28 01:13:40 NOTE fixed_driftmap: Correcting ZA to 4:05:38.7 ... 2010-Aug-28 01:13:40 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0940921989 -CF 2010-Aug-28 01:13:40 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-28 01:13:40 START begin_task: Starting task 'WAPP calibration' 2010-Aug-28 01:13:40 LOG5 begin_task: Level: (2) ID = <10260> Status = 0 0 0 0 ok 2010-Aug-28 01:13:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-28 01:13:40 START begin_task: Starting task 'selecting calibration type' 2010-Aug-28 01:13:40 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2010-Aug-28 01:13:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-28 01:13:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-28 01:13:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 01:13:40 START begin_task: Starting task 'waiting on setcal' 2010-Aug-28 01:13:40 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2010-Aug-28 01:13:40 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0940921989 -CF 2010-Aug-28 01:13:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:13:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-28 01:13:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 01:13:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:13:40 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-28 01:13:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-28 01:13:40 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2010-Aug-28 01:13:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-28 01:13:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 01:13:40 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-28 01:13:40 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 01:13:40 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2010-Aug-28 01:13:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:13:41 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 01:13:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 01:13:41 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2010-Aug-28 01:13:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 01:13:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-28 01:13:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 01:13:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-28 01:13:41 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 01:13:41 LOG5 begin_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2010-Aug-28 01:13:41 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 01:13:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 01:13:41 LOG5 end_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2010-Aug-28 01:13:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 01:13:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-28 01:13:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-28 01:13:41 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2010-Aug-28 01:13:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-28 01:13:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-28 01:13:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-28 01:13:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 01:13:41 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2010-Aug-28 01:13:41 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 01:13:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-28 01:13:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 01:13:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 01:13:41 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2010-Aug-28 01:13:41 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-28 01:13:41 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 01:13:41 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2010-Aug-28 01:13:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-28 01:13:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 01:13:41 INFO2 take_data: Starting WAPP 1-second scan: 24000015 2010-Aug-28 01:13:41 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 01:13:41 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2010-Aug-28 01:13:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 01:13:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-28 01:13:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18822.00 2010-Aug-28 01:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 01:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:13:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:13:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 01:13:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 01:13:43 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2010-Aug-28 01:13:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 01:13:43 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2010-Aug-28 01:13:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-28 01:13:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-28 01:13:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-28 01:13:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 01:13:43 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2010-Aug-28 01:13:43 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 01:13:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-28 01:13:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 01:13:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 01:13:43 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2010-Aug-28 01:13:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-28 01:13:43 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-28 01:13:43 LOG5 finish_task: Level: (2) ID = <10260> Status = 0 0 0 0 ok 2010-Aug-28 01:13:43 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-28 01:13:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-28 01:13:43 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-28 01:13:43 LOG5 end_task: Level: (2) ID = <10260> Status = 0 0 0 0 ok 2010-Aug-28 01:13:43 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2010-Aug-28 01:13:43 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2010-Aug-28 01:13:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:13:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:13:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:13:44 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:13:44 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-28 01:13:44 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-28 01:13:44 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 01:13:44 LOG5 begin_task: Level: (2) ID = <10269> Status = 0 0 0 0 ok 2010-Aug-28 01:13:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-28 01:13:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 01:13:44 INFO2 take_data: Starting WAPP 600-second scan: 24000016 2010-Aug-28 01:13:44 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 01:13:44 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2010-Aug-28 01:13:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-28 01:13:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 01:13:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-28 01:13:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18825.00 2010-Aug-28 01:13:44 NOTE WAPPDATA-new_file: New FITS file: wapp.20100828.a2010.0007.fits 2010-Aug-28 01:13:44 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100828.a2010.0007.fits} 2010-Aug-28 01:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 01:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:13:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:23:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 01:23:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 01:23:45 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2010-Aug-28 01:23:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 01:23:45 LOG5 end_task: Level: (2) ID = <10269> Status = 0 0 0 0 ok 2010-Aug-28 01:23:45 LOG1 fixed_driftmap: New position: year = 2010.6572434215529 RA = 23:21:30.1 RA/Dec = 23:22:04.2 +22:26:54.0 2010-Aug-28 01:23:45 NOTE fixed_driftmap: Correcting ZA to 4:05:40.3 ... 2010-Aug-28 01:23:45 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0945377179 -CF 2010-Aug-28 01:23:45 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-28 01:23:45 START begin_task: Starting task 'WAPP calibration' 2010-Aug-28 01:23:45 LOG5 begin_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2010-Aug-28 01:23:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-28 01:23:45 START begin_task: Starting task 'selecting calibration type' 2010-Aug-28 01:23:45 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2010-Aug-28 01:23:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-28 01:23:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-28 01:23:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 01:23:45 START begin_task: Starting task 'waiting on setcal' 2010-Aug-28 01:23:45 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2010-Aug-28 01:23:45 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0945377179 -CF 2010-Aug-28 01:23:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:23:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-28 01:23:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 01:23:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:23:45 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-28 01:23:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-28 01:23:45 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2010-Aug-28 01:23:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-28 01:23:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 01:23:45 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-28 01:23:45 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 01:23:45 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2010-Aug-28 01:23:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:23:46 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 01:23:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 01:23:46 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2010-Aug-28 01:23:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 01:23:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-28 01:23:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 01:23:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-28 01:23:46 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 01:23:46 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2010-Aug-28 01:23:46 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 01:23:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 01:23:46 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2010-Aug-28 01:23:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 01:23:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-28 01:23:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-28 01:23:46 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2010-Aug-28 01:23:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-28 01:23:46 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-28 01:23:46 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-28 01:23:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 01:23:46 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2010-Aug-28 01:23:46 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 01:23:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-28 01:23:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 01:23:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 01:23:46 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2010-Aug-28 01:23:46 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-28 01:23:46 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 01:23:46 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2010-Aug-28 01:23:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-28 01:23:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 01:23:46 INFO2 take_data: Starting WAPP 1-second scan: 24000017 2010-Aug-28 01:23:46 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 01:23:46 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2010-Aug-28 01:23:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 01:23:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-28 01:23:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19427.00 2010-Aug-28 01:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 01:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:23:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:23:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 01:23:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 01:23:48 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2010-Aug-28 01:23:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 01:23:48 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2010-Aug-28 01:23:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-28 01:23:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-28 01:23:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-28 01:23:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 01:23:48 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2010-Aug-28 01:23:48 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 01:23:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-28 01:23:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 01:23:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 01:23:48 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2010-Aug-28 01:23:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-28 01:23:48 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-28 01:23:48 LOG5 finish_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2010-Aug-28 01:23:48 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-28 01:23:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-28 01:23:48 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-28 01:23:48 LOG5 end_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2010-Aug-28 01:23:48 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2010-Aug-28 01:23:48 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2010-Aug-28 01:23:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:23:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:23:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:23:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:23:49 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-28 01:23:49 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-28 01:23:49 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 01:23:49 LOG5 begin_task: Level: (2) ID = <10280> Status = 0 0 0 0 ok 2010-Aug-28 01:23:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-28 01:23:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 01:23:49 INFO2 take_data: Starting WAPP 600-second scan: 24000018 2010-Aug-28 01:23:49 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 01:23:49 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2010-Aug-28 01:23:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-28 01:23:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 01:23:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-28 01:23:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19430.00 2010-Aug-28 01:23:49 NOTE WAPPDATA-new_file: New FITS file: wapp.20100828.a2010.0008.fits 2010-Aug-28 01:23:49 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100828.a2010.0008.fits} 2010-Aug-28 01:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 01:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:23:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:33:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 01:33:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 01:33:50 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2010-Aug-28 01:33:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 01:33:50 LOG5 end_task: Level: (2) ID = <10280> Status = 0 0 0 0 ok 2010-Aug-28 01:33:50 LOG1 fixed_driftmap: New position: year = 2010.6572625928461 RA = 23:31:36.5 RA/Dec = 23:32:10.9 +22:26:55.2 2010-Aug-28 01:33:50 NOTE fixed_driftmap: Correcting ZA to 4:05:41.5 ... 2010-Aug-28 01:33:50 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0948669426 -CF 2010-Aug-28 01:33:50 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-28 01:33:50 START begin_task: Starting task 'WAPP calibration' 2010-Aug-28 01:33:50 LOG5 begin_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2010-Aug-28 01:33:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-28 01:33:50 START begin_task: Starting task 'selecting calibration type' 2010-Aug-28 01:33:50 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Aug-28 01:33:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-28 01:33:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-28 01:33:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 01:33:50 START begin_task: Starting task 'waiting on setcal' 2010-Aug-28 01:33:50 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2010-Aug-28 01:33:50 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0948669426 -CF 2010-Aug-28 01:33:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:33:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-28 01:33:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 01:33:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:33:50 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-28 01:33:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-28 01:33:50 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2010-Aug-28 01:33:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-28 01:33:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 01:33:50 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-28 01:33:50 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 01:33:50 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2010-Aug-28 01:33:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:33:51 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 01:33:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 01:33:51 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2010-Aug-28 01:33:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 01:33:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-28 01:33:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 01:33:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-28 01:33:51 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 01:33:51 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2010-Aug-28 01:33:51 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 01:33:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 01:33:51 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2010-Aug-28 01:33:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 01:33:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-28 01:33:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-28 01:33:51 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Aug-28 01:33:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-28 01:33:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-28 01:33:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-28 01:33:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 01:33:51 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2010-Aug-28 01:33:51 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 01:33:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-28 01:33:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 01:33:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 01:33:51 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2010-Aug-28 01:33:51 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-28 01:33:51 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 01:33:51 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2010-Aug-28 01:33:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-28 01:33:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 01:33:51 INFO2 take_data: Starting WAPP 1-second scan: 24000019 2010-Aug-28 01:33:52 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 01:33:52 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2010-Aug-28 01:33:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 01:33:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-28 01:33:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20033.00 2010-Aug-28 01:33:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 01:33:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:33:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:33:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:33:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:33:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:33:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:33:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:33:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:33:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 01:33:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 01:33:54 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2010-Aug-28 01:33:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 01:33:54 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2010-Aug-28 01:33:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-28 01:33:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-28 01:33:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-28 01:33:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 01:33:54 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2010-Aug-28 01:33:54 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 01:33:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-28 01:33:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 01:33:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 01:33:54 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2010-Aug-28 01:33:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-28 01:33:54 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-28 01:33:54 LOG5 finish_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2010-Aug-28 01:33:54 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-28 01:33:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-28 01:33:54 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-28 01:33:54 LOG5 end_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2010-Aug-28 01:33:54 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2010-Aug-28 01:33:54 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2010-Aug-28 01:33:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:33:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:33:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:33:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:33:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-28 01:33:55 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-28 01:33:55 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 01:33:55 LOG5 begin_task: Level: (2) ID = <10291> Status = 0 0 0 0 ok 2010-Aug-28 01:33:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-28 01:33:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 01:33:55 INFO2 take_data: Starting WAPP 600-second scan: 24000020 2010-Aug-28 01:33:55 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 01:33:55 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2010-Aug-28 01:33:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-28 01:33:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 01:33:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-28 01:33:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20036.00 2010-Aug-28 01:33:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20100828.a2010.0009.fits 2010-Aug-28 01:33:55 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100828.a2010.0009.fits} 2010-Aug-28 01:33:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 01:33:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:33:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:33:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:33:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:33:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:33:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:33:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:33:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:37:26 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 01:37:26.300 (seconds: 5846.300)!} 2010-Aug-28 01:37:26 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 01:37:26.300 (seconds: 5846.300)! 2010-Aug-28 01:37:27 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 5845.0 to 5846.0! 2010-Aug-28 01:37:28 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (5845.0 - 5847.0)! 2010-Aug-28 01:43:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 01:43:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 01:43:56 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2010-Aug-28 01:43:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 01:43:56 LOG5 end_task: Level: (2) ID = <10291> Status = 0 0 0 0 ok 2010-Aug-28 01:43:56 LOG1 fixed_driftmap: New position: year = 2010.6572817958274 RA = 23:41:44.0 RA/Dec = 23:42:18.5 +22:26:56.0 2010-Aug-28 01:43:56 NOTE fixed_driftmap: Correcting ZA to 4:05:42.3 ... 2010-Aug-28 01:43:56 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0950794827 -CF 2010-Aug-28 01:43:56 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-28 01:43:56 START begin_task: Starting task 'WAPP calibration' 2010-Aug-28 01:43:56 LOG5 begin_task: Level: (2) ID = <10293> Status = 0 0 0 0 ok 2010-Aug-28 01:43:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-28 01:43:56 START begin_task: Starting task 'selecting calibration type' 2010-Aug-28 01:43:56 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Aug-28 01:43:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-28 01:43:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-28 01:43:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 01:43:56 START begin_task: Starting task 'waiting on setcal' 2010-Aug-28 01:43:56 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2010-Aug-28 01:43:56 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0950794827 -CF 2010-Aug-28 01:43:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:43:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-28 01:43:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 01:43:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:43:56 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-28 01:43:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-28 01:43:56 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2010-Aug-28 01:43:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-28 01:43:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 01:43:56 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-28 01:43:56 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 01:43:56 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2010-Aug-28 01:43:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:43:57 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 01:43:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 01:43:57 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2010-Aug-28 01:43:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 01:43:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-28 01:43:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 01:43:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-28 01:43:57 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 01:43:57 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2010-Aug-28 01:43:57 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 01:43:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 01:43:57 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2010-Aug-28 01:43:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 01:43:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-28 01:43:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-28 01:43:57 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Aug-28 01:43:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-28 01:43:57 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-28 01:43:57 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-28 01:43:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 01:43:57 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2010-Aug-28 01:43:57 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 01:43:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-28 01:43:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 01:43:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 01:43:57 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2010-Aug-28 01:43:57 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-28 01:43:57 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 01:43:57 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2010-Aug-28 01:43:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-28 01:43:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 01:43:57 INFO2 take_data: Starting WAPP 1-second scan: 24000021 2010-Aug-28 01:43:57 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 01:43:57 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2010-Aug-28 01:43:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 01:43:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-28 01:43:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20638.00 2010-Aug-28 01:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 01:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:43:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:43:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 01:43:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 01:43:59 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2010-Aug-28 01:43:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 01:43:59 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2010-Aug-28 01:43:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-28 01:43:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-28 01:43:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-28 01:43:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 01:43:59 LOG5 begin_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2010-Aug-28 01:43:59 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 01:43:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-28 01:43:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 01:43:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 01:43:59 LOG5 end_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2010-Aug-28 01:43:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-28 01:43:59 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-28 01:43:59 LOG5 finish_task: Level: (2) ID = <10293> Status = 0 0 0 0 ok 2010-Aug-28 01:43:59 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-28 01:43:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-28 01:43:59 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-28 01:43:59 LOG5 end_task: Level: (2) ID = <10293> Status = 0 0 0 0 ok 2010-Aug-28 01:43:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2010-Aug-28 01:43:59 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2010-Aug-28 01:43:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:43:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:43:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:44:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:44:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-28 01:44:00 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-28 01:44:00 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 01:44:00 LOG5 begin_task: Level: (2) ID = <10302> Status = 0 0 0 0 ok 2010-Aug-28 01:44:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-28 01:44:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 01:44:00 INFO2 take_data: Starting WAPP 600-second scan: 24000022 2010-Aug-28 01:44:00 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 01:44:00 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2010-Aug-28 01:44:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-28 01:44:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 01:44:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-28 01:44:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20641.00 2010-Aug-28 01:44:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20100828.a2010.0010.fits 2010-Aug-28 01:44:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100828.a2010.0010.fits} 2010-Aug-28 01:44:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 01:44:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:44:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:44:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:44:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:44:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:44:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:44:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:44:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:54:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 01:54:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 01:54:01 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2010-Aug-28 01:54:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 01:54:01 LOG5 end_task: Level: (2) ID = <10302> Status = 0 0 0 0 ok 2010-Aug-28 01:54:01 LOG1 fixed_driftmap: New position: year = 2010.6573009671206 RA = 23:51:50.4 RA/Dec = 23:52:25.2 +22:26:56.3 2010-Aug-28 01:54:01 NOTE fixed_driftmap: Correcting ZA to 4:05:42.6 ... 2010-Aug-28 01:54:01 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0951742248 -CF 2010-Aug-28 01:54:01 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-28 01:54:01 START begin_task: Starting task 'WAPP calibration' 2010-Aug-28 01:54:01 LOG5 begin_task: Level: (2) ID = <10304> Status = 0 0 0 0 ok 2010-Aug-28 01:54:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-28 01:54:01 START begin_task: Starting task 'selecting calibration type' 2010-Aug-28 01:54:01 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2010-Aug-28 01:54:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-28 01:54:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-28 01:54:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 01:54:01 START begin_task: Starting task 'waiting on setcal' 2010-Aug-28 01:54:01 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2010-Aug-28 01:54:01 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0951742248 -CF 2010-Aug-28 01:54:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:54:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-28 01:54:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 01:54:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:54:01 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-28 01:54:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-28 01:54:01 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2010-Aug-28 01:54:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-28 01:54:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 01:54:01 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-28 01:54:01 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 01:54:01 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2010-Aug-28 01:54:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 01:54:02 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 01:54:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 01:54:02 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2010-Aug-28 01:54:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 01:54:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-28 01:54:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 01:54:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-28 01:54:02 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 01:54:02 LOG5 begin_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2010-Aug-28 01:54:02 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 01:54:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 01:54:02 LOG5 end_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2010-Aug-28 01:54:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 01:54:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-28 01:54:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-28 01:54:02 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2010-Aug-28 01:54:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-28 01:54:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-28 01:54:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-28 01:54:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 01:54:02 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2010-Aug-28 01:54:02 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 01:54:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-28 01:54:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 01:54:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 01:54:02 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2010-Aug-28 01:54:02 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-28 01:54:02 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 01:54:02 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2010-Aug-28 01:54:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-28 01:54:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 01:54:02 INFO2 take_data: Starting WAPP 1-second scan: 24000023 2010-Aug-28 01:54:02 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 01:54:02 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2010-Aug-28 01:54:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 01:54:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-28 01:54:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21243.00 2010-Aug-28 01:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 01:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:54:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:54:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 01:54:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 01:54:04 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2010-Aug-28 01:54:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 01:54:04 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2010-Aug-28 01:54:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-28 01:54:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-28 01:54:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-28 01:54:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 01:54:04 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2010-Aug-28 01:54:04 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 01:54:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-28 01:54:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 01:54:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 01:54:04 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2010-Aug-28 01:54:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-28 01:54:04 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-28 01:54:04 LOG5 finish_task: Level: (2) ID = <10304> Status = 0 0 0 0 ok 2010-Aug-28 01:54:04 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-28 01:54:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-28 01:54:04 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-28 01:54:04 LOG5 end_task: Level: (2) ID = <10304> Status = 0 0 0 0 ok 2010-Aug-28 01:54:04 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2010-Aug-28 01:54:04 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2010-Aug-28 01:54:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:54:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:54:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:54:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-28 01:54:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-28 01:54:05 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-28 01:54:05 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 01:54:05 LOG5 begin_task: Level: (2) ID = <10313> Status = 0 0 0 0 ok 2010-Aug-28 01:54:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-28 01:54:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 01:54:05 INFO2 take_data: Starting WAPP 600-second scan: 24000024 2010-Aug-28 01:54:05 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 01:54:05 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2010-Aug-28 01:54:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-28 01:54:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 01:54:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-28 01:54:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21246.00 2010-Aug-28 01:54:05 NOTE WAPPDATA-new_file: New FITS file: wapp.20100828.a2010.0011.fits 2010-Aug-28 01:54:05 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100828.a2010.0011.fits} 2010-Aug-28 01:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 01:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 01:54:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:04:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 02:04:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 02:04:06 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2010-Aug-28 02:04:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 02:04:06 LOG5 end_task: Level: (2) ID = <10313> Status = 0 0 0 0 ok 2010-Aug-28 02:04:06 LOG1 fixed_driftmap: New position: year = 2010.6573201384135 RA = 00:01:56.8 RA/Dec = 00:02:31.9 +22:26:56.2 2010-Aug-28 02:04:06 NOTE fixed_driftmap: Correcting ZA to 4:05:42.5 ... 2010-Aug-28 02:04:06 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0951514299 -CF 2010-Aug-28 02:04:06 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-28 02:04:06 START begin_task: Starting task 'WAPP calibration' 2010-Aug-28 02:04:06 LOG5 begin_task: Level: (2) ID = <10315> Status = 0 0 0 0 ok 2010-Aug-28 02:04:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-28 02:04:06 START begin_task: Starting task 'selecting calibration type' 2010-Aug-28 02:04:06 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2010-Aug-28 02:04:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-28 02:04:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-28 02:04:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 02:04:06 START begin_task: Starting task 'waiting on setcal' 2010-Aug-28 02:04:06 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2010-Aug-28 02:04:06 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0951514299 -CF 2010-Aug-28 02:04:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 02:04:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-28 02:04:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 02:04:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 02:04:06 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-28 02:04:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-28 02:04:06 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2010-Aug-28 02:04:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-28 02:04:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 02:04:06 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-28 02:04:06 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 02:04:06 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2010-Aug-28 02:04:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 02:04:07 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 02:04:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 02:04:07 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2010-Aug-28 02:04:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 02:04:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-28 02:04:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 02:04:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-28 02:04:07 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 02:04:07 LOG5 begin_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2010-Aug-28 02:04:07 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 02:04:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 02:04:07 LOG5 end_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2010-Aug-28 02:04:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 02:04:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-28 02:04:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-28 02:04:07 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2010-Aug-28 02:04:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-28 02:04:07 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-28 02:04:07 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-28 02:04:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 02:04:07 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2010-Aug-28 02:04:07 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 02:04:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-28 02:04:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 02:04:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 02:04:07 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2010-Aug-28 02:04:07 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-28 02:04:07 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 02:04:07 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2010-Aug-28 02:04:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-28 02:04:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 02:04:07 INFO2 take_data: Starting WAPP 1-second scan: 24000025 2010-Aug-28 02:04:07 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 02:04:07 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2010-Aug-28 02:04:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 02:04:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-28 02:04:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21848.00 2010-Aug-28 02:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 02:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:04:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:04:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 02:04:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 02:04:09 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2010-Aug-28 02:04:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 02:04:09 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2010-Aug-28 02:04:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-28 02:04:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-28 02:04:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-28 02:04:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 02:04:09 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2010-Aug-28 02:04:10 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 02:04:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-28 02:04:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 02:04:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 02:04:10 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2010-Aug-28 02:04:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-28 02:04:10 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-28 02:04:10 LOG5 finish_task: Level: (2) ID = <10315> Status = 0 0 0 0 ok 2010-Aug-28 02:04:10 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-28 02:04:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-28 02:04:10 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-28 02:04:10 LOG5 end_task: Level: (2) ID = <10315> Status = 0 0 0 0 ok 2010-Aug-28 02:04:10 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2010-Aug-28 02:04:10 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2010-Aug-28 02:04:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-28 02:04:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-28 02:04:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-28 02:04:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-28 02:04:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-28 02:04:10 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-28 02:04:10 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 02:04:10 LOG5 begin_task: Level: (2) ID = <10324> Status = 0 0 0 0 ok 2010-Aug-28 02:04:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-28 02:04:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 02:04:10 INFO2 take_data: Starting WAPP 600-second scan: 24000026 2010-Aug-28 02:04:10 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 02:04:10 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2010-Aug-28 02:04:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-28 02:04:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 02:04:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-28 02:04:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21851.00 2010-Aug-28 02:04:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20100828.a2010.0012.fits 2010-Aug-28 02:04:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100828.a2010.0012.fits} 2010-Aug-28 02:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 02:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:07:24 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 02:07:24.303 (seconds: 7644.303)!} 2010-Aug-28 02:07:24 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 02:07:24.303 (seconds: 7644.303)! 2010-Aug-28 02:07:25 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 7643.0 to 7644.0! 2010-Aug-28 02:07:26 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (7643.0 - 7645.0)! 2010-Aug-28 02:14:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 02:14:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 02:14:11 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2010-Aug-28 02:14:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 02:14:11 LOG5 end_task: Level: (2) ID = <10324> Status = 0 0 0 0 ok 2010-Aug-28 02:14:11 LOG1 fixed_driftmap: New position: year = 2010.6573393097067 RA = 00:12:03.2 RA/Dec = 00:12:38.5 +22:26:55.7 2010-Aug-28 02:14:11 NOTE fixed_driftmap: Correcting ZA to 4:05:42.0 ... 2010-Aug-28 02:14:11 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0950111429 -CF 2010-Aug-28 02:14:11 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-28 02:14:11 START begin_task: Starting task 'WAPP calibration' 2010-Aug-28 02:14:11 LOG5 begin_task: Level: (2) ID = <10326> Status = 0 0 0 0 ok 2010-Aug-28 02:14:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-28 02:14:11 START begin_task: Starting task 'selecting calibration type' 2010-Aug-28 02:14:11 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2010-Aug-28 02:14:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-28 02:14:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-28 02:14:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 02:14:11 START begin_task: Starting task 'waiting on setcal' 2010-Aug-28 02:14:11 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2010-Aug-28 02:14:11 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0950111429 -CF 2010-Aug-28 02:14:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 02:14:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-28 02:14:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 02:14:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 02:14:12 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-28 02:14:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-28 02:14:12 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2010-Aug-28 02:14:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-28 02:14:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 02:14:12 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-28 02:14:12 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 02:14:12 LOG5 begin_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2010-Aug-28 02:14:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 02:14:12 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 02:14:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 02:14:12 LOG5 end_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2010-Aug-28 02:14:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 02:14:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-28 02:14:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 02:14:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-28 02:14:12 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 02:14:12 LOG5 begin_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2010-Aug-28 02:14:12 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 02:14:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 02:14:12 LOG5 end_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2010-Aug-28 02:14:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 02:14:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-28 02:14:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-28 02:14:12 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2010-Aug-28 02:14:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-28 02:14:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-28 02:14:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-28 02:14:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 02:14:12 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2010-Aug-28 02:14:12 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 02:14:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-28 02:14:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 02:14:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 02:14:12 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2010-Aug-28 02:14:12 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-28 02:14:12 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 02:14:12 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2010-Aug-28 02:14:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-28 02:14:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 02:14:12 INFO2 take_data: Starting WAPP 1-second scan: 24000027 2010-Aug-28 02:14:12 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 02:14:12 LOG5 begin_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2010-Aug-28 02:14:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 02:14:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-28 02:14:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22453.00 2010-Aug-28 02:14:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 02:14:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:14:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:14:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:14:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:14:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:14:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:14:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:14:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:14:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 02:14:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 02:14:14 LOG5 end_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2010-Aug-28 02:14:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 02:14:14 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2010-Aug-28 02:14:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-28 02:14:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-28 02:14:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-28 02:14:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 02:14:14 LOG5 begin_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2010-Aug-28 02:14:14 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 02:14:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-28 02:14:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 02:14:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 02:14:14 LOG5 end_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2010-Aug-28 02:14:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-28 02:14:14 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-28 02:14:14 LOG5 finish_task: Level: (2) ID = <10326> Status = 0 0 0 0 ok 2010-Aug-28 02:14:14 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-28 02:14:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-28 02:14:14 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-28 02:14:14 LOG5 end_task: Level: (2) ID = <10326> Status = 0 0 0 0 ok 2010-Aug-28 02:14:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 20 of 99 2010-Aug-28 02:14:15 LOG4 send_obs_status: To obs_status: <1> LOOP 20 2010-Aug-28 02:14:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-28 02:14:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-28 02:14:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-28 02:14:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-28 02:14:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-28 02:14:15 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-28 02:14:15 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 02:14:15 LOG5 begin_task: Level: (2) ID = <10335> Status = 0 0 0 0 ok 2010-Aug-28 02:14:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-28 02:14:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 02:14:15 INFO2 take_data: Starting WAPP 600-second scan: 24000028 2010-Aug-28 02:14:15 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 02:14:15 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2010-Aug-28 02:14:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-28 02:14:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 02:14:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22456.00 2010-Aug-28 02:14:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-28 02:14:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20100828.a2010.0013.fits 2010-Aug-28 02:14:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100828.a2010.0013.fits} 2010-Aug-28 02:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 02:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:14:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:24:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 02:24:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 02:24:16 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2010-Aug-28 02:24:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 02:24:16 LOG5 end_task: Level: (2) ID = <10335> Status = 0 0 0 0 ok 2010-Aug-28 02:24:16 LOG1 fixed_driftmap: New position: year = 2010.6573584809998 RA = 00:22:09.6 RA/Dec = 00:22:45.2 +22:26:54.8 2010-Aug-28 02:24:16 NOTE fixed_driftmap: Correcting ZA to 4:05:41.1 ... 2010-Aug-28 02:24:16 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.0947536334 -CF 2010-Aug-28 02:24:16 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-28 02:24:16 START begin_task: Starting task 'WAPP calibration' 2010-Aug-28 02:24:16 LOG5 begin_task: Level: (2) ID = <10337> Status = 0 0 0 0 ok 2010-Aug-28 02:24:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-28 02:24:16 START begin_task: Starting task 'selecting calibration type' 2010-Aug-28 02:24:16 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Aug-28 02:24:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-28 02:24:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-28 02:24:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 02:24:16 START begin_task: Starting task 'waiting on setcal' 2010-Aug-28 02:24:16 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2010-Aug-28 02:24:16 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.0947536334 -CF 2010-Aug-28 02:24:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 02:24:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-28 02:24:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-28 02:24:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 02:24:16 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-28 02:24:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-28 02:24:16 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2010-Aug-28 02:24:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-28 02:24:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 02:24:17 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-28 02:24:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 02:24:17 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2010-Aug-28 02:24:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-28 02:24:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 02:24:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 02:24:17 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2010-Aug-28 02:24:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 02:24:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-28 02:24:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-28 02:24:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-28 02:24:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-28 02:24:17 LOG5 begin_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2010-Aug-28 02:24:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-28 02:24:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-28 02:24:17 LOG5 end_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2010-Aug-28 02:24:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-28 02:24:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-28 02:24:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-28 02:24:17 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Aug-28 02:24:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-28 02:24:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-28 02:24:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-28 02:24:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 02:24:17 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2010-Aug-28 02:24:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 02:24:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-28 02:24:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 02:24:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 02:24:17 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2010-Aug-28 02:24:17 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-28 02:24:17 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 02:24:17 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2010-Aug-28 02:24:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-28 02:24:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 02:24:17 INFO2 take_data: Starting WAPP 1-second scan: 24000029 2010-Aug-28 02:24:17 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 02:24:17 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2010-Aug-28 02:24:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 02:24:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-28 02:24:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23058.00 2010-Aug-28 02:24:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 02:24:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:24:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:24:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:24:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:24:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:24:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:24:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:24:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:24:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-28 02:24:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-28 02:24:19 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2010-Aug-28 02:24:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-28 02:24:19 LOG5 end_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2010-Aug-28 02:24:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-28 02:24:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-28 02:24:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-28 02:24:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-28 02:24:19 LOG5 begin_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2010-Aug-28 02:24:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-28 02:24:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-28 02:24:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-28 02:24:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-28 02:24:19 LOG5 end_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2010-Aug-28 02:24:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-28 02:24:19 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-28 02:24:19 LOG5 finish_task: Level: (2) ID = <10337> Status = 0 0 0 0 ok 2010-Aug-28 02:24:19 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-28 02:24:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-28 02:24:19 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-28 02:24:19 LOG5 end_task: Level: (2) ID = <10337> Status = 0 0 0 0 ok 2010-Aug-28 02:24:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 21 of 99 2010-Aug-28 02:24:19 LOG4 send_obs_status: To obs_status: <1> LOOP 21 2010-Aug-28 02:24:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-28 02:24:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-28 02:24:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-28 02:24:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-28 02:24:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-28 02:24:20 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-28 02:24:20 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-28 02:24:20 LOG5 begin_task: Level: (2) ID = <10346> Status = 0 0 0 0 ok 2010-Aug-28 02:24:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-28 02:24:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-28 02:24:20 INFO2 take_data: Starting WAPP 600-second scan: 24000030 2010-Aug-28 02:24:20 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-28 02:24:20 LOG5 begin_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2010-Aug-28 02:24:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-28 02:24:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-28 02:24:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-28 02:24:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23061.00 2010-Aug-28 02:24:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20100828.a2010.0014.fits 2010-Aug-28 02:24:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100828.a2010.0014.fits} 2010-Aug-28 02:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-28 02:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-28 02:24:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Ba