2010-Aug-26 22:57:01 BEGIN executive: CIMA executive starting ... 2010-Aug-26 22:57:01 NOTE executive: STARTING NEW CIMA SESSION 2010-Aug-26 22:57:01 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-Aug-26 22:57:01 INFO4 executive: This is an ON-LINE session 2010-Aug-26 22:57:01 INFO4 executive: This is a REMOTE session 2010-Aug-26 22:57:01 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-Aug-26 22:57:01 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Lyle Hoffman' 2010-Aug-26 22:57:01 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20100826' 2010-Aug-26 22:57:02 LOG2 log_preferences: Currently applied preferences: 2010-Aug-26 22:57:02 LOG2 log_preferences: prefs(dailylog) = daily 2010-Aug-26 22:57:02 LOG2 log_preferences: prefs(offlinelog) = skip 2010-Aug-26 22:57:02 LOG2 log_preferences: prefs(datawindow) = open 2010-Aug-26 22:57:02 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-Aug-26 22:57:02 LOG2 log_preferences: prefs(wappfailure) = abort 2010-Aug-26 22:57:02 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-Aug-26 22:57:02 LOG2 log_preferences: prefs(logcolours) = full 2010-Aug-26 22:57:02 LOG2 log_preferences: prefs(displaylevel) = INFO5 2010-Aug-26 22:57:02 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-Aug-26 22:57:02 LOG2 log_preferences: prefs(displayformat) = long 2010-Aug-26 22:57:02 LOG2 log_preferences: prefs(logformat) = new 2010-Aug-26 22:57:02 LOG2 log_preferences: prefs(fontsize) = 3 2010-Aug-26 22:57:02 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-Aug-26 22:57:02 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2010-Aug-26 22:57:02 ALERT executive: CIMA executive ready 2010-Aug-26 22:57:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:57:04 NOTE frontend: CIMA frontend ready 2010-Aug-26 22:57:04 LOG4 got_cormsg: From DATATAKING: setup 2010-Aug-26 22:57:09 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2010-Aug-26 22:57:09 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2010-Aug-26 22:57:09 LOG4 got_cormsg: From DATATAKING: vw% io 2010-Aug-26 22:57:09 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-Aug-26 22:57:09 LOG4 got_cormsg: From DATATAKING: 2010-Aug-26 22:57:09 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2010-Aug-26 22:57:09 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-Aug-26 22:57:09 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-Aug-26 22:57:09 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-Aug-26 22:57:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-Aug-26 22:57:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-Aug-26 22:57:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-Aug-26 22:57:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-Aug-26 22:57:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-Aug-26 22:57:09 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-Aug-26 22:57:10 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-Aug-26 22:57:10 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-Aug-26 22:57:10 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2010-Aug-26 22:57:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:57:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:57:28 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-Aug-26 22:57:28 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-Aug-26 22:57:28 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-Aug-26 22:57:28 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-Aug-26 22:57:28 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-26 22:57:28 NOTE select_receiver: Starting to select receiver ALFA 2010-Aug-26 22:57:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Aug-26 22:57:28 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Aug-26 22:57:28 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Aug-26 22:57:28 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Aug-26 22:57:28 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Aug-26 22:57:28 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-26 22:57:28 DONE finish_task: DONE finished selecting: receiver ALFA 2010-Aug-26 22:57:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-26 22:57:28 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Aug-26 22:57:28 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-26 22:57:28 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Aug-26 22:57:28 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Aug-26 22:57:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:57:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:57:47 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Aug-26 22:57:47 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Aug-26 22:57:47 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Aug-26 22:57:47 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Aug-26 22:57:47 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Aug-26 22:57:47 NOTE restart_wapp: Restarting all WAPPs 2010-Aug-26 22:57:47 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Aug-26 22:57:47 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Aug-26 22:57:47 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Aug-26 22:57:47 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-26 22:57:50 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Aug-26 22:57:50 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Aug-26 22:57:50 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Aug-26 22:57:50 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Aug-26 22:58:44 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc_aug10.cmd' 2010-Aug-26 22:58:49 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc_aug10.cmd' to executive ... 2010-Aug-26 22:58:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_10.conf} 2010-Aug-26 22:58:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {CATALOG galfa_togs.cat} 2010-Aug-26 22:58:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {SEEK galfasrc} 2010-Aug-26 22:58:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 10 {TRACKCURPOS} 2010-Aug-26 22:58:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 11 {ALFAANGLE 19.} 2010-Aug-26 22:58:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {WAITTRACK} 2010-Aug-26 22:58:50 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2010-Aug-26 22:58:50 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Aug-26 22:58:50 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc_aug10.cmd 1 1 7 2010-Aug-26 22:58:50 LOG4 run_command_file: Calling 'run_command_file command_galfasrc_aug10.cmd 1 1 7' 2010-Aug-26 22:58:50 BEGIN begin_task: Starting task 'running command file 'command_galfasrc_aug10.cmd'' 2010-Aug-26 22:58:50 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-26 22:58:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc_aug10.cmd' ...} 2010-Aug-26 22:58:50 NOTE run_command_file: Starting execution of command file 'command_galfasrc_aug10.cmd' from line 1 2010-Aug-26 22:58:50 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_10.conf' 2010-Aug-26 22:58:50 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Aug-26 22:58:50 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-26 22:58:50 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Aug-26 22:58:50 NOTE CIMA-load_config_file: Loading configuration file 'togs_10.conf' 2010-Aug-26 22:58:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Aug-26 22:58:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Aug-26 22:58:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Aug-26 22:58:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Aug-26 22:58:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Aug-26 22:58:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Aug-26 22:58:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Aug-26 22:58:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Aug-26 22:58:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-26 22:58:52 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Aug-26 22:58:52 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-26 22:58:52 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Aug-26 22:58:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Aug-26 22:58:52 INFO1 config_iflo: Selecting receiver ALFA 2010-Aug-26 22:58:52 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-Aug-26 22:58:52 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2010-Aug-26 22:58:52 START begin_task: Starting task 'selecting receiver ALFA' 2010-Aug-26 22:58:52 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-26 22:58:52 NOTE select_receiver: Starting to select receiver ALFA 2010-Aug-26 22:58:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Aug-26 22:58:52 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Aug-26 22:58:52 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Aug-26 22:58:52 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Aug-26 22:58:52 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Aug-26 22:58:52 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-26 22:58:52 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-Aug-26 22:58:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-26 22:58:52 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Aug-26 22:58:52 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-26 22:58:52 START begin_task: Starting task 'waiting for receiver ALFA' 2010-Aug-26 22:58:52 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Aug-26 22:58:52 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-Aug-26 22:58:52 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Aug-26 22:58:52 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-Aug-26 22:58:52 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-Aug-26 22:58:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-26 22:58:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-26 22:58:52 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-26 22:58:52 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Aug-26 22:58:52 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-26 22:58:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-26 22:58:52 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Aug-26 22:58:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-26 22:58:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-26 22:58:52 LOG3 vw_send: To DATATAKING: alfafb 1 2010-Aug-26 22:58:52 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-Aug-26 22:58:52 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Aug-26 22:58:52 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Aug-26 22:58:52 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-Aug-26 22:58:53 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-Aug-26 22:58:53 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-Aug-26 22:58:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-26 22:58:53 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-Aug-26 22:58:53 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-Aug-26 22:58:53 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Aug-26 22:58:53 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Aug-26 22:58:53 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Aug-26 22:58:53 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Aug-26 22:58:53 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Aug-26 22:58:53 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-Aug-26 22:58:53 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-Aug-26 22:58:53 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-Aug-26 22:58:53 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-Aug-26 22:58:53 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Aug-26 22:58:53 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-Aug-26 22:58:53 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Aug-26 22:58:53 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Aug-26 22:58:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 22:58:53 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Aug-26 22:58:53 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-Aug-26 22:58:53 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Aug-26 22:58:53 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-Aug-26 22:58:53 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-Aug-26 22:58:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Aug-26 22:58:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 22:58:53 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Aug-26 22:58:53 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-Aug-26 22:58:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 22:58:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:58:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:08 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-26 22:59:08 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Aug-26 22:59:08 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Aug-26 22:59:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Aug-26 22:59:08 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Aug-26 22:59:08 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-26 22:59:08 DONE finish_task: DONE finished configuration: IF/LO path 2010-Aug-26 22:59:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-26 22:59:08 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Aug-26 22:59:08 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-26 22:59:08 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Aug-26 22:59:08 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-26 22:59:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Aug-26 22:59:08 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Aug-26 22:59:08 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Aug-26 22:59:08 START begin_task: Starting task 'selecting calibration port' 2010-Aug-26 22:59:08 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Aug-26 22:59:08 LOG3 vw_send: To DATATAKING: calport 3 2010-Aug-26 22:59:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Aug-26 22:59:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 22:59:09 START begin_task: Starting task 'waiting on calport' 2010-Aug-26 22:59:09 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-Aug-26 22:59:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:09 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Aug-26 22:59:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 22:59:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:09 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-26 22:59:09 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Aug-26 22:59:09 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-Aug-26 22:59:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Aug-26 22:59:09 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Aug-26 22:59:09 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Aug-26 22:59:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-26 22:59:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-26 22:59:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 22:59:09 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Aug-26 22:59:09 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 22:59:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-26 22:59:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 22:59:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 22:59:09 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Aug-26 22:59:09 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Aug-26 22:59:09 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Aug-26 22:59:09 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Aug-26 22:59:09 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Aug-26 22:59:09 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Aug-26 22:59:09 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Aug-26 22:59:09 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Aug-26 22:59:09 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Aug-26 22:59:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-26 22:59:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-26 22:59:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-26 22:59:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-26 22:59:09 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Aug-26 22:59:09 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Aug-26 22:59:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 22:59:09 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Aug-26 22:59:09 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 22:59:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-26 22:59:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 22:59:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 22:59:09 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Aug-26 22:59:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-26 22:59:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-26 22:59:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-26 22:59:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-26 22:59:10 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Aug-26 22:59:10 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-26 22:59:10 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Aug-26 22:59:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-26 22:59:10 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Aug-26 22:59:10 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-26 22:59:10 COMMAND run_command_line: EXECUTING command 8: 'CATALOG galfa_togs.cat' 2010-Aug-26 22:59:10 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/galfa_togs.cat' 2010-Aug-26 22:59:10 COMMAND run_command_line: EXECUTING command 9: 'SEEK galfasrc' 2010-Aug-26 22:59:10 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/galfa_togs.cat galfasrc nooffset wait' 2010-Aug-26 22:59:10 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2010-Aug-26 22:59:10 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-26 22:59:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2010-Aug-26 22:59:10 LOG3 track_source: Calling 'track_source galfasrc 180.0 6. F 0.0 0.0 main small /share/obs4/usr/a2010/galfa_togs.cat 0 Topocentric velocity(optical)' 2010-Aug-26 22:59:10 START begin_task: Starting task 'sending tracking commands' 2010-Aug-26 22:59:10 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-26 22:59:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2010-Aug-26 22:59:10 INFO1 track_source: Starting to track galfasrc 2010-Aug-26 22:59:10 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2010-Aug-26 22:59:10 LOG3 vw_send: To DATATAKING: set ra 180.0 2010-Aug-26 22:59:10 LOG3 vw_send: To DATATAKING: set dec 6. 2010-Aug-26 22:59:10 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-26 22:59:10 LOG3 vw_send: To DATATAKING: pnt tr 180.0 6. -CF 2010-Aug-26 22:59:10 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-26 22:59:10 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-26 22:59:10 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-26 22:59:10 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-26 22:59:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-26 22:59:10 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-26 22:59:10 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-26 22:59:10 START begin_task: Starting task 'waiting on telescope' 2010-Aug-26 22:59:10 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-26 22:59:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-26 22:59:10 LOG3 waittrk: Start waittrk 5 2010-Aug-26 22:59:10 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-26 22:59:10 LOG5 begin_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2010-Aug-26 22:59:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-26 22:59:10 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2010-Aug-26 22:59:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Aug-26 22:59:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Aug-26 22:59:10 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2010-Aug-26 22:59:10 LOG4 got_cormsg: From DATATAKING: set dec 6. 2010-Aug-26 22:59:10 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2010-Aug-26 22:59:10 LOG4 got_cormsg: From DATATAKING: vw% 6. 2010-Aug-26 22:59:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:10 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-26 22:59:10 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 6. -CF 2010-Aug-26 22:59:10 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-26 22:59:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-26 22:59:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20100826.a2010.0000.fits 2010-Aug-26 22:59:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100826.a2010.0000.fits} 2010-Aug-26 22:59:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-26 22:59:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-26 22:59:15 LOG5 end_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2010-Aug-26 22:59:15 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-26 22:59:15 LOG5 begin_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2010-Aug-26 22:59:22 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-26 22:59:22 LOG5 end_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2010-Aug-26 22:59:22 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-26 22:59:22 INFO2 waittrk: Now tracking galfasrc 2010-Aug-26 22:59:22 LOG4 waittrk: Current telescope position: Az = 179.75 ZA = 6.02 2010-Aug-26 22:59:22 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-26 22:59:22 LOG5 finish_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-26 22:59:22 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-26 22:59:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-26 22:59:23 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-26 22:59:23 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-26 22:59:23 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2010-Aug-26 22:59:23 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-26 22:59:23 DONE finish_task: DONE finished tracking: source 'galfasrc' 2010-Aug-26 22:59:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-26 22:59:23 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2010-Aug-26 22:59:23 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-26 22:59:23 COMMAND run_command_line: EXECUTING command 10: 'TRACKCURPOS' 2010-Aug-26 22:59:23 BEGIN begin_task: Starting task 'tracking current position' 2010-Aug-26 22:59:23 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-26 22:59:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2010-Aug-26 22:59:23 INFO1 track_current_pos: Starting to track the current commanded position RA = 20:52:50.8 and Dec = +24:18:35.3 2010-Aug-26 22:59:23 LOG3 track_source: Calling 'track_source Cur-pos 205250.8 241835.3 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-Aug-26 22:59:23 START begin_task: Starting task 'sending tracking commands' 2010-Aug-26 22:59:23 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-26 22:59:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2010-Aug-26 22:59:23 INFO1 track_source: Starting to track Cur-pos 2010-Aug-26 22:59:23 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2010-Aug-26 22:59:23 LOG3 vw_send: To DATATAKING: set ra 205250.8 2010-Aug-26 22:59:23 LOG3 vw_send: To DATATAKING: set dec 241835.3 2010-Aug-26 22:59:23 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-26 22:59:23 LOG3 vw_send: To DATATAKING: pnt tr 205250.8 241835.3 -CJ 2010-Aug-26 22:59:23 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-26 22:59:23 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-26 22:59:23 LOG5 finish_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-26 22:59:23 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-26 22:59:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-26 22:59:23 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-26 22:59:23 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-26 22:59:23 START begin_task: Starting task 'waiting on telescope' 2010-Aug-26 22:59:23 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-26 22:59:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-26 22:59:23 LOG3 waittrk: Start waittrk 5 2010-Aug-26 22:59:23 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-26 22:59:23 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2010-Aug-26 22:59:23 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2010-Aug-26 22:59:23 LOG4 got_cormsg: From DATATAKING: set ra 205250.8 2010-Aug-26 22:59:23 LOG4 got_cormsg: From DATATAKING: set dec 241835.3 2010-Aug-26 22:59:23 LOG4 got_cormsg: From DATATAKING: vw% 205250.8 2010-Aug-26 22:59:23 LOG4 got_cormsg: From DATATAKING: vw% 241835.3 2010-Aug-26 22:59:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:23 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-26 22:59:23 LOG4 got_cormsg: From DATATAKING: pnt tr 205250.8 241835.3 -CJ 2010-Aug-26 22:59:23 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-26 22:59:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-26 22:59:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 22:59:28 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-26 22:59:28 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2010-Aug-26 22:59:28 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-26 22:59:28 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Aug-26 22:59:33 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-26 22:59:33 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Aug-26 22:59:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-26 22:59:33 INFO2 waittrk: Now tracking Cur-pos 2010-Aug-26 22:59:33 LOG4 waittrk: Current telescope position: Az = 179.36 ZA = 6.02 2010-Aug-26 22:59:33 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-26 22:59:33 LOG5 finish_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-26 22:59:33 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-26 22:59:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-26 22:59:33 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-26 22:59:33 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-26 22:59:33 STOP finish_task: Finishing task 'tracking current position' 2010-Aug-26 22:59:33 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-26 22:59:33 DONE finish_task: DONE finished tracking: current position 2010-Aug-26 22:59:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-26 22:59:33 END end_task: Finishing task 'tracking current position' with status 'OK' 2010-Aug-26 22:59:34 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-26 22:59:34 COMMAND run_command_line: EXECUTING command 11: 'ALFAANGLE 19.' 2010-Aug-26 22:59:34 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19. 2010-Aug-26 22:59:34 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-26 22:59:34 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-26 22:59:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-26 22:59:34 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-26 22:59:34 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19. REPLY 2010-Aug-26 22:59:34 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Aug-26 22:59:34 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Aug-26 22:59:34 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Aug-26 23:00:17 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-26 23:00:17 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-26 23:00:17 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Aug-26 23:00:17 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Aug-26 23:00:17 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Aug-26 23:00:17 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-26 23:00:17 LOG5 finish_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-26 23:00:17 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-26 23:00:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-26 23:00:17 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-26 23:00:17 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-26 23:00:17 COMMAND run_command_line: EXECUTING command 12: 'WAITTRACK' 2010-Aug-26 23:00:17 BEGIN begin_task: Starting task 'waiting on telescope' 2010-Aug-26 23:00:17 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-26 23:00:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-26 23:00:17 LOG3 waittrk: Start waittrk 5 2010-Aug-26 23:00:17 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-26 23:00:17 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Aug-26 23:00:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-26 23:00:22 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Aug-26 23:00:22 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-26 23:00:22 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Aug-26 23:00:23 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-26 23:00:23 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Aug-26 23:00:23 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Aug-26 23:00:23 INFO2 waittrk: Now tracking Cur-pos 2010-Aug-26 23:00:23 LOG4 waittrk: Current telescope position: Az = 177.57 ZA = 6.02 2010-Aug-26 23:00:23 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-26 23:00:23 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-26 23:00:23 DONE finish_task: DONE finished waiting: telescope on source 2010-Aug-26 23:00:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-26 23:00:23 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-26 23:00:23 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-26 23:00:23 COMMAND run_command_line: EXECUTING command 16: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-Aug-26 23:00:23 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-Aug-26 23:00:23 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-26 23:00:23 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-Aug-26 23:00:23 BEGIN begin_task: Starting task 'smart frequency switching' 2010-Aug-26 23:00:23 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-26 23:00:23 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2010-Aug-26 23:00:23 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-Aug-26 23:00:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-Aug-26 23:00:23 START begin_task: Starting task 'selecting calibration type' 2010-Aug-26 23:00:23 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Aug-26 23:00:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-26 23:00:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-26 23:00:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:00:23 START begin_task: Starting task 'waiting on setcal' 2010-Aug-26 23:00:23 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2010-Aug-26 23:00:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-26 23:00:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:00:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:00:24 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-26 23:00:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-26 23:00:24 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2010-Aug-26 23:00:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-26 23:00:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-26 23:00:24 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-26 23:00:24 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-26 23:00:24 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Aug-26 23:00:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:00:25 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-26 23:00:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-26 23:00:25 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Aug-26 23:00:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-26 23:00:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-26 23:00:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-26 23:00:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-26 23:00:25 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-26 23:00:25 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-Aug-26 23:00:25 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-26 23:00:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-26 23:00:25 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-Aug-26 23:00:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-26 23:00:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-26 23:00:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-26 23:00:25 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Aug-26 23:00:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:00:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:00:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:00:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:00:25 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20100826.a2010.0000.fits' is empty! 2010-Aug-26 23:00:25 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-Aug-26 23:00:25 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Aug-26 23:00:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Aug-26 23:00:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-26 23:00:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-26 23:00:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 23:00:25 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Aug-26 23:00:25 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 23:00:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-26 23:00:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 23:00:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 23:00:25 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Aug-26 23:00:25 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Aug-26 23:00:25 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-26 23:00:25 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-26 23:00:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Aug-26 23:00:25 INFO2 adjust_power: Starting to adjust WAPP power 2010-Aug-26 23:00:25 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Aug-26 23:00:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Aug-26 23:00:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:00:25 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Aug-26 23:00:25 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Aug-26 23:00:25 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Aug-26 23:00:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:00:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-26 23:00:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:00:28 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-26 23:00:28 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Aug-26 23:00:28 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Aug-26 23:00:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Aug-26 23:00:28 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-26 23:00:28 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-26 23:00:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Aug-26 23:00:28 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-26 23:00:28 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-26 23:00:28 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-26 23:00:28 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-26 23:00:28 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Aug-26 23:00:28 LOG5 begin_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2010-Aug-26 23:00:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Aug-26 23:00:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:00:29 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Aug-26 23:00:29 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 5 dB 2010-Aug-26 23:00:29 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 3 3 dB 2010-Aug-26 23:00:29 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Aug-26 23:00:29 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Aug-26 23:00:29 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Aug-26 23:00:29 LOG5 end_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2010-Aug-26 23:00:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.883 0.940 ALFA beam 1: 0.946 1.013 2010-Aug-26 23:00:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.983 0.901 ALFA beam 3: 1.051 0.966 2010-Aug-26 23:00:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.070 0.873 ALFA beam 5: 1.095 1.123 2010-Aug-26 23:00:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.898 0.854 ALFA beam 7: 0.986 1.009 2010-Aug-26 23:00:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-26 23:00:29 LOG5 finish_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-26 23:00:29 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Aug-26 23:00:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-26 23:00:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-26 23:00:29 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-26 23:00:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-26 23:00:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-26 23:00:29 LOG5 finish_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-26 23:00:29 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Aug-26 23:00:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-26 23:00:29 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-26 23:00:29 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-26 23:00:29 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-Aug-26 23:00:29 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-26 23:00:29 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-26 23:00:29 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:00:29 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65423 J 2010-Aug-26 23:00:29 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:00:29 LOG2 antvel: Parameters to Doppler: Topocentric 97228 2010 238 0.0 2010-Aug-26 23:00:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:00:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-26 23:00:29 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-26 23:00:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:00:29 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:00:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-26 23:00:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:00:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-Aug-26 23:00:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:00:29 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Aug-26 23:00:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-26 23:00:29 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.907239 2010.6542331482749 18.999933 2010-Aug-26 23:00:29 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777766 24.309805555555556 2010-Aug-26 23:00:29 LOG4 log_alfabeam: ALFABEAM 1 20.882362413519019 24.205915731071556 2010-Aug-26 23:00:29 LOG4 log_alfabeam: ALFABEAM 2 20.887168383934874 24.278204440154646 2010-Aug-26 23:00:29 LOG4 log_alfabeam: ALFABEAM 3 20.885659146043107 24.382340193797560 2010-Aug-26 23:00:29 LOG4 log_alfabeam: ALFABEAM 4 20.879146360511204 24.413614738687382 2010-Aug-26 23:00:29 LOG4 log_alfabeam: ALFABEAM 5 20.874315166507280 24.340063790434229 2010-Aug-26 23:00:29 LOG4 log_alfabeam: ALFABEAM 6 20.876021591559045 24.236517269061384 2010-Aug-26 23:00:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800082 2010-Aug-26 23:00:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:00:30 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Aug-26 23:00:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:00:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-26 23:00:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:00:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:00:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:00:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-26 23:00:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10831.00 2010-Aug-26 23:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:00:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:00:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:00:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:00:41 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Aug-26 23:00:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:00:41 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Aug-26 23:00:41 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-Aug-26 23:00:41 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-26 23:00:41 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-26 23:00:41 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:00:41 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65423 J 2010-Aug-26 23:00:41 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:00:41 LOG2 antvel: Parameters to Doppler: Topocentric 97241 2010 238 0.0 2010-Aug-26 23:00:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:00:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-26 23:00:41 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-26 23:00:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:00:41 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:00:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-26 23:00:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:00:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-Aug-26 23:00:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:00:41 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Aug-26 23:00:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-26 23:00:41 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.910860 2010.6542335602201 18.999933 2010-Aug-26 23:00:41 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777809 24.309805555555549 2010-Aug-26 23:00:41 LOG4 log_alfabeam: ALFABEAM 1 20.882427619110157 24.206105726427545 2010-Aug-26 23:00:41 LOG4 log_alfabeam: ALFABEAM 2 20.887188041135357 24.278956566258977 2010-Aug-26 23:00:41 LOG4 log_alfabeam: ALFABEAM 3 20.885613329518822 24.382911072788879 2010-Aug-26 23:00:41 LOG4 log_alfabeam: ALFABEAM 4 20.879081120936959 24.413419277895834 2010-Aug-26 23:00:41 LOG4 log_alfabeam: ALFABEAM 5 20.874296412716017 24.339303778092763 2010-Aug-26 23:00:41 LOG4 log_alfabeam: ALFABEAM 6 20.876067796937654 24.235961405897942 2010-Aug-26 23:00:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800083 2010-Aug-26 23:00:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:00:42 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-Aug-26 23:00:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:00:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-26 23:00:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:00:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:00:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:00:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-26 23:00:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10843.00 2010-Aug-26 23:00:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:00:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:00:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:00:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:00:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:00:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:00:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:00:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:00:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:00:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:00:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:00:53 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-Aug-26 23:00:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:00:53 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Aug-26 23:00:53 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-Aug-26 23:00:53 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-26 23:00:53 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-26 23:00:53 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:00:53 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65423 J 2010-Aug-26 23:00:53 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:00:53 LOG2 antvel: Parameters to Doppler: Topocentric 97253 2010 238 0.0 2010-Aug-26 23:00:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:00:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-26 23:00:53 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-26 23:00:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:00:53 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:00:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-26 23:00:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:00:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-Aug-26 23:00:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:00:53 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Aug-26 23:00:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-26 23:00:53 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.914202 2010.6542339404771 18.999933 2010-Aug-26 23:00:53 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777922 24.309805555555556 2010-Aug-26 23:00:53 LOG4 log_alfabeam: ALFABEAM 1 20.882487645151812 24.206287725868613 2010-Aug-26 23:00:53 LOG4 log_alfabeam: ALFABEAM 2 20.887205751564391 24.279652238540550 2010-Aug-26 23:00:53 LOG4 log_alfabeam: ALFABEAM 3 20.885570756670674 24.383432766605715 2010-Aug-26 23:00:53 LOG4 log_alfabeam: ALFABEAM 4 20.879021069900510 24.413232242250036 2010-Aug-26 23:00:53 LOG4 log_alfabeam: ALFABEAM 5 20.874279544332953 24.338601012250329 2010-Aug-26 23:00:53 LOG4 log_alfabeam: ALFABEAM 6 20.876110711157018 24.235453638215461 2010-Aug-26 23:00:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800084 2010-Aug-26 23:00:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:00:54 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-Aug-26 23:00:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:00:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-26 23:00:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:00:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:00:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:00:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-26 23:00:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10855.00 2010-Aug-26 23:00:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:00:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:00:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:00:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:00:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:00:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:00:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:00:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:00:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:01:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:01:05 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-Aug-26 23:01:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:01:05 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Aug-26 23:01:05 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-Aug-26 23:01:05 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-26 23:01:05 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-26 23:01:05 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:01:05 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65423 J 2010-Aug-26 23:01:05 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:01:05 LOG2 antvel: Parameters to Doppler: Topocentric 97265 2010 238 0.0 2010-Aug-26 23:01:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:01:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-26 23:01:05 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-26 23:01:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:01:05 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:01:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-26 23:01:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:01:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-Aug-26 23:01:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:01:05 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Aug-26 23:01:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-26 23:01:05 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.917545 2010.6542343207341 18.999933 2010-Aug-26 23:01:05 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777848 24.309805555555556 2010-Aug-26 23:01:05 LOG4 log_alfabeam: ALFABEAM 1 20.882547529085031 24.206476109721638 2010-Aug-26 23:01:05 LOG4 log_alfabeam: ALFABEAM 2 20.887223049945550 24.280349424670828 2010-Aug-26 23:01:05 LOG4 log_alfabeam: ALFABEAM 3 20.885527904552493 24.383949538290850 2010-Aug-26 23:01:05 LOG4 log_alfabeam: ALFABEAM 4 20.878961167076756 24.413038830340611 2010-Aug-26 23:01:05 LOG4 log_alfabeam: ALFABEAM 5 20.874263095832287 24.337896910320946 2010-Aug-26 23:01:05 LOG4 log_alfabeam: ALFABEAM 6 20.876153887838800 24.234950856075280 2010-Aug-26 23:01:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800085 2010-Aug-26 23:01:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:01:06 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-Aug-26 23:01:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:01:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-26 23:01:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:01:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:01:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:01:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-26 23:01:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10867.00 2010-Aug-26 23:01:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:01:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:01:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:01:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:01:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:01:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:01:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:01:17 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-Aug-26 23:01:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:01:17 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Aug-26 23:01:17 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-Aug-26 23:01:17 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-26 23:01:17 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-26 23:01:17 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:01:17 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65423 J 2010-Aug-26 23:01:17 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:01:17 LOG2 antvel: Parameters to Doppler: Topocentric 97277 2010 238 0.0 2010-Aug-26 23:01:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:01:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-26 23:01:17 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-26 23:01:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:01:17 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:01:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-26 23:01:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:01:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-Aug-26 23:01:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:01:17 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-Aug-26 23:01:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-26 23:01:17 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.920887 2010.6542347009911 18.999933 2010-Aug-26 23:01:17 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777830 24.309805555555556 2010-Aug-26 23:01:17 LOG4 log_alfabeam: ALFABEAM 1 20.882607224688552 24.206670713301019 2010-Aug-26 23:01:17 LOG4 log_alfabeam: ALFABEAM 2 20.887239923921591 24.281047577989437 2010-Aug-26 23:01:17 LOG4 log_alfabeam: ALFABEAM 3 20.885484807310910 24.384460998362680 2010-Aug-26 23:01:17 LOG4 log_alfabeam: ALFABEAM 4 20.878901458687761 24.412839211657726 2010-Aug-26 23:01:17 LOG4 log_alfabeam: ALFABEAM 5 20.874247078732054 24.337192025083802 2010-Aug-26 23:01:17 LOG4 log_alfabeam: ALFABEAM 6 20.876197292574147 24.234453435339461 2010-Aug-26 23:01:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800086 2010-Aug-26 23:01:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:01:18 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Aug-26 23:01:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:01:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-26 23:01:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:01:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:01:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:01:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-26 23:01:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10879.00 2010-Aug-26 23:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:01:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:01:29 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Aug-26 23:01:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:01:29 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-Aug-26 23:01:29 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-Aug-26 23:01:29 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-26 23:01:29 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-26 23:01:29 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:01:29 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:01:29 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:01:29 LOG2 antvel: Parameters to Doppler: Topocentric 97289 2010 238 0.0 2010-Aug-26 23:01:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:01:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-26 23:01:29 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-26 23:01:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:01:29 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:01:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-26 23:01:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:01:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-Aug-26 23:01:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:01:29 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Aug-26 23:01:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-26 23:01:29 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.924229 2010.6542350812483 18.999933 2010-Aug-26 23:01:29 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777830 24.309805555555542 2010-Aug-26 23:01:29 LOG4 log_alfabeam: ALFABEAM 1 20.882666739630910 24.206871536872107 2010-Aug-26 23:01:29 LOG4 log_alfabeam: ALFABEAM 2 20.887256376950535 24.281746777104225 2010-Aug-26 23:01:29 LOG4 log_alfabeam: ALFABEAM 3 20.885441460786296 24.384967224869069 2010-Aug-26 23:01:29 LOG4 log_alfabeam: ALFABEAM 4 20.878841937043404 24.412633386210246 2010-Aug-26 23:01:29 LOG4 log_alfabeam: ALFABEAM 5 20.874231489492576 24.336486277676496 2010-Aug-26 23:01:29 LOG4 log_alfabeam: ALFABEAM 6 20.876240929567050 24.233961296869989 2010-Aug-26 23:01:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800087 2010-Aug-26 23:01:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:01:30 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Aug-26 23:01:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:01:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-26 23:01:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:01:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:01:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:01:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-26 23:01:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10891.00 2010-Aug-26 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:01:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:01:41 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Aug-26 23:01:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:01:41 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Aug-26 23:01:41 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-Aug-26 23:01:41 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-26 23:01:41 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-26 23:01:41 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:01:41 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:01:41 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:01:41 LOG2 antvel: Parameters to Doppler: Topocentric 97301 2010 238 0.0 2010-Aug-26 23:01:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:01:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-26 23:01:41 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-26 23:01:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:01:41 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:01:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-26 23:01:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:01:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-Aug-26 23:01:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:01:41 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Aug-26 23:01:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-26 23:01:41 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.927572 2010.6542354615053 18.999933 2010-Aug-26 23:01:41 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777819 24.309805555555549 2010-Aug-26 23:01:41 LOG4 log_alfabeam: ALFABEAM 1 20.882726081497005 24.207078585038111 2010-Aug-26 23:01:41 LOG4 log_alfabeam: ALFABEAM 2 20.887272412216014 24.282447101764795 2010-Aug-26 23:01:41 LOG4 log_alfabeam: ALFABEAM 3 20.885397860623765 24.385468292646181 2010-Aug-26 23:01:41 LOG4 log_alfabeam: ALFABEAM 4 20.878782594540702 24.412421349667660 2010-Aug-26 23:01:41 LOG4 log_alfabeam: ALFABEAM 5 20.874216324853919 24.335779588173835 2010-Aug-26 23:01:41 LOG4 log_alfabeam: ALFABEAM 6 20.876284803208499 24.233474364788499 2010-Aug-26 23:01:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800088 2010-Aug-26 23:01:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:01:42 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-Aug-26 23:01:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:01:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-26 23:01:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:01:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:01:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:01:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-26 23:01:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10903.00 2010-Aug-26 23:01:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:01:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:01:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:01:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:01:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:01:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:01:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:01:53 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-Aug-26 23:01:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:01:53 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Aug-26 23:01:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Aug-26 23:01:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-26 23:01:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-26 23:01:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 23:01:53 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Aug-26 23:01:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 23:01:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-26 23:01:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 23:01:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 23:01:53 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Aug-26 23:01:53 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-Aug-26 23:01:53 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-26 23:01:53 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-26 23:01:53 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:01:53 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:01:53 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:01:53 LOG2 antvel: Parameters to Doppler: Topocentric 97313 2010 238 0.0 2010-Aug-26 23:01:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:01:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-26 23:01:53 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-26 23:01:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:01:53 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:01:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-26 23:01:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:01:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-Aug-26 23:01:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:01:53 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Aug-26 23:01:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-Aug-26 23:01:53 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.930914 2010.6542358417623 18.999933 2010-Aug-26 23:01:53 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777805 24.309805555555567 2010-Aug-26 23:01:53 LOG4 log_alfabeam: ALFABEAM 1 20.882785204785385 24.207291672631669 2010-Aug-26 23:01:53 LOG4 log_alfabeam: ALFABEAM 2 20.887288018803833 24.283148003102387 2010-Aug-26 23:01:53 LOG4 log_alfabeam: ALFABEAM 3 20.885354041726892 24.385963830756975 2010-Aug-26 23:01:53 LOG4 log_alfabeam: ALFABEAM 4 20.878723476657559 24.412203291924421 2010-Aug-26 23:01:53 LOG4 log_alfabeam: ALFABEAM 5 20.874201594867998 24.335072510811084 2010-Aug-26 23:01:53 LOG4 log_alfabeam: ALFABEAM 6 20.876328878400848 24.232992996292793 2010-Aug-26 23:01:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800089 2010-Aug-26 23:01:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:01:54 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-Aug-26 23:01:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:01:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-26 23:01:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:01:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:01:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:01:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-26 23:01:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10915.00 2010-Aug-26 23:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:02:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:02:05 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-Aug-26 23:02:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:02:05 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Aug-26 23:02:05 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-Aug-26 23:02:05 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-26 23:02:05 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-26 23:02:05 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:02:05 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:02:05 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:02:05 LOG2 antvel: Parameters to Doppler: Topocentric 97325 2010 238 0.0 2010-Aug-26 23:02:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:02:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-26 23:02:05 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-26 23:02:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:02:05 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:02:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-26 23:02:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:02:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-Aug-26 23:02:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:02:05 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Aug-26 23:02:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-Aug-26 23:02:05 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.934257 2010.6542362220193 18.999933 2010-Aug-26 23:02:05 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777748 24.309805555555549 2010-Aug-26 23:02:05 LOG4 log_alfabeam: ALFABEAM 1 20.882844135023621 24.207510862890331 2010-Aug-26 23:02:05 LOG4 log_alfabeam: ALFABEAM 2 20.887303204961498 24.283849770751601 2010-Aug-26 23:02:05 LOG4 log_alfabeam: ALFABEAM 3 20.885309986781646 24.386454067706374 2010-Aug-26 23:02:05 LOG4 log_alfabeam: ALFABEAM 4 20.878664557842427 24.411979148490520 2010-Aug-26 23:02:05 LOG4 log_alfabeam: ALFABEAM 5 20.874187291468299 24.334364753673846 2010-Aug-26 23:02:05 LOG4 log_alfabeam: ALFABEAM 6 20.876373172593766 24.232516966075387 2010-Aug-26 23:02:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800090 2010-Aug-26 23:02:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:02:06 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Aug-26 23:02:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:02:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-26 23:02:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:02:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:02:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:02:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-26 23:02:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10927.00 2010-Aug-26 23:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:02:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:02:17 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Aug-26 23:02:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:02:17 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Aug-26 23:02:17 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-Aug-26 23:02:17 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-26 23:02:17 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-26 23:02:17 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:02:17 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:02:17 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:02:17 LOG2 antvel: Parameters to Doppler: Topocentric 97337 2010 238 0.0 2010-Aug-26 23:02:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:02:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-26 23:02:17 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-26 23:02:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:02:17 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:02:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-26 23:02:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:02:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-Aug-26 23:02:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:02:17 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Aug-26 23:02:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-Aug-26 23:02:17 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.937599 2010.6542366022763 18.999933 2010-Aug-26 23:02:17 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777823 24.309805555555553 2010-Aug-26 23:02:17 LOG4 log_alfabeam: ALFABEAM 1 20.882902827261599 24.207735957541175 2010-Aug-26 23:02:17 LOG4 log_alfabeam: ALFABEAM 2 20.887317960740386 24.284551855346660 2010-Aug-26 23:02:17 LOG4 log_alfabeam: ALFABEAM 3 20.885265731127333 24.386938645368385 2010-Aug-26 23:02:17 LOG4 log_alfabeam: ALFABEAM 4 20.878605883006696 24.411749122299494 2010-Aug-26 23:02:17 LOG4 log_alfabeam: ALFABEAM 5 20.874173423729438 24.333656870983141 2010-Aug-26 23:02:17 LOG4 log_alfabeam: ALFABEAM 6 20.876417650299111 24.232046618490994 2010-Aug-26 23:02:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800091 2010-Aug-26 23:02:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:02:18 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Aug-26 23:02:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:02:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-26 23:02:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:02:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:02:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:02:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-26 23:02:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10939.00 2010-Aug-26 23:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:02:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:02:29 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Aug-26 23:02:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:02:29 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Aug-26 23:02:29 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-Aug-26 23:02:29 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-26 23:02:29 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-26 23:02:29 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:02:29 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:02:29 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:02:29 LOG2 antvel: Parameters to Doppler: Topocentric 97349 2010 238 0.0 2010-Aug-26 23:02:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:02:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-26 23:02:29 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-26 23:02:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:02:29 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:02:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-26 23:02:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:02:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-Aug-26 23:02:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:02:29 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Aug-26 23:02:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-Aug-26 23:02:29 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.940942 2010.6542369825336 18.999933 2010-Aug-26 23:02:29 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777819 24.309805555555549 2010-Aug-26 23:02:29 LOG4 log_alfabeam: ALFABEAM 1 20.882961307088920 24.207967021325533 2010-Aug-26 23:02:29 LOG4 log_alfabeam: ALFABEAM 2 20.887332294334978 24.285254547827996 2010-Aug-26 23:02:29 LOG4 log_alfabeam: ALFABEAM 3 20.885221257334518 24.387417792096990 2010-Aug-26 23:02:29 LOG4 log_alfabeam: ALFABEAM 4 20.878547426535157 24.411513147331490 2010-Aug-26 23:02:29 LOG4 log_alfabeam: ALFABEAM 5 20.874159983640624 24.332948569457059 2010-Aug-26 23:02:29 LOG4 log_alfabeam: ALFABEAM 6 20.876462329085992 24.231581728442443 2010-Aug-26 23:02:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800092 2010-Aug-26 23:02:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:02:30 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-Aug-26 23:02:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:02:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-26 23:02:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:02:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:02:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:02:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-26 23:02:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10951.00 2010-Aug-26 23:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:02:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:02:41 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-Aug-26 23:02:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:02:41 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Aug-26 23:02:41 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-Aug-26 23:02:41 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-26 23:02:41 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-26 23:02:41 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:02:41 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:02:41 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:02:41 LOG2 antvel: Parameters to Doppler: Topocentric 97361 2010 238 0.0 2010-Aug-26 23:02:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:02:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-26 23:02:41 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-26 23:02:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:02:41 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:02:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-26 23:02:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:02:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-Aug-26 23:02:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:02:41 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Aug-26 23:02:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-Aug-26 23:02:41 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.944284 2010.6542373627906 18.999933 2010-Aug-26 23:02:41 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777819 24.309805555555553 2010-Aug-26 23:02:41 LOG4 log_alfabeam: ALFABEAM 1 20.883019530160091 24.208203843356426 2010-Aug-26 23:02:41 LOG4 log_alfabeam: ALFABEAM 2 20.887346196760529 24.285957299102343 2010-Aug-26 23:02:41 LOG4 log_alfabeam: ALFABEAM 3 20.885176601121838 24.387891162870879 2010-Aug-26 23:02:41 LOG4 log_alfabeam: ALFABEAM 4 20.878489232719694 24.411271439056289 2010-Aug-26 23:02:41 LOG4 log_alfabeam: ALFABEAM 5 20.874146979303326 24.332240402528221 2010-Aug-26 23:02:41 LOG4 log_alfabeam: ALFABEAM 6 20.876507173132133 24.231122627185236 2010-Aug-26 23:02:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800093 2010-Aug-26 23:02:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:02:42 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Aug-26 23:02:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:02:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-26 23:02:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:02:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:02:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:02:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-26 23:02:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10963.00 2010-Aug-26 23:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:02:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:02:53 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Aug-26 23:02:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:02:53 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Aug-26 23:02:53 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-Aug-26 23:02:53 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-26 23:02:53 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-26 23:02:53 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:02:53 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:02:53 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:02:53 LOG2 antvel: Parameters to Doppler: Topocentric 97373 2010 238 0.0 2010-Aug-26 23:02:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:02:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-26 23:02:53 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-26 23:02:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:02:53 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:02:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-26 23:02:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:02:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-Aug-26 23:02:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:02:53 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Aug-26 23:02:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-Aug-26 23:02:53 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.947627 2010.6542377430476 18.999933 2010-Aug-26 23:02:53 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777819 24.309805555555549 2010-Aug-26 23:02:53 LOG4 log_alfabeam: ALFABEAM 1 20.883077522133387 24.208446490056112 2010-Aug-26 23:02:53 LOG4 log_alfabeam: ALFABEAM 2 20.887359676152055 24.286660401560635 2010-Aug-26 23:02:53 LOG4 log_alfabeam: ALFABEAM 3 20.885131744931531 24.388358985863928 2010-Aug-26 23:02:53 LOG4 log_alfabeam: ALFABEAM 4 20.878431275875588 24.411023929743724 2010-Aug-26 23:02:53 LOG4 log_alfabeam: ALFABEAM 5 20.874134402770288 24.331532075404631 2010-Aug-26 23:02:53 LOG4 log_alfabeam: ALFABEAM 6 20.876552200138676 24.230669089873345 2010-Aug-26 23:02:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800094 2010-Aug-26 23:02:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:02:54 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Aug-26 23:02:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:02:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-26 23:02:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:02:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:02:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:02:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-26 23:02:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10975.00 2010-Aug-26 23:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:02:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:03:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:03:05 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Aug-26 23:03:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:03:05 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Aug-26 23:03:05 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-Aug-26 23:03:05 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-26 23:03:05 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-26 23:03:05 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:03:05 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:03:05 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:03:05 LOG2 antvel: Parameters to Doppler: Topocentric 97385 2010 238 0.0 2010-Aug-26 23:03:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:03:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-26 23:03:05 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-26 23:03:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:03:05 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:03:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-26 23:03:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:03:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-Aug-26 23:03:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:03:05 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Aug-26 23:03:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-Aug-26 23:03:05 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.950969 2010.6542381233046 18.999933 2010-Aug-26 23:03:05 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777805 24.309805555555556 2010-Aug-26 23:03:05 LOG4 log_alfabeam: ALFABEAM 1 20.883135239317696 24.208694738454891 2010-Aug-26 23:03:05 LOG4 log_alfabeam: ALFABEAM 2 20.887372724483050 24.287363307137412 2010-Aug-26 23:03:05 LOG4 log_alfabeam: ALFABEAM 3 20.885086724804378 24.388820929397721 2010-Aug-26 23:03:05 LOG4 log_alfabeam: ALFABEAM 4 20.878373599625412 24.410770846857822 2010-Aug-26 23:03:05 LOG4 log_alfabeam: ALFABEAM 5 20.874122261177522 24.330824139973508 2010-Aug-26 23:03:05 LOG4 log_alfabeam: ALFABEAM 6 20.876597374005453 24.230221434461821 2010-Aug-26 23:03:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800095 2010-Aug-26 23:03:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:03:06 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Aug-26 23:03:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:03:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-26 23:03:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:03:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:03:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:03:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-26 23:03:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10987.00 2010-Aug-26 23:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:03:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:03:17 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Aug-26 23:03:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:03:17 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Aug-26 23:03:17 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2010-Aug-26 23:03:17 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Aug-26 23:03:17 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Aug-26 23:03:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-26 23:03:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-26 23:03:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 23:03:17 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Aug-26 23:03:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 23:03:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-26 23:03:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 23:03:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 23:03:17 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Aug-26 23:03:17 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Aug-26 23:03:17 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-Aug-26 23:03:17 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-26 23:03:17 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-26 23:03:17 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:03:17 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:03:17 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:03:17 LOG2 antvel: Parameters to Doppler: Topocentric 97397 2010 238 0.0 2010-Aug-26 23:03:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:03:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-26 23:03:17 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-26 23:03:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:03:17 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:03:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-26 23:03:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:03:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-Aug-26 23:03:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:03:17 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-Aug-26 23:03:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-26 23:03:18 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.954312 2010.6542385035616 18.999933 2010-Aug-26 23:03:18 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777826 24.309805555555549 2010-Aug-26 23:03:18 LOG4 log_alfabeam: ALFABEAM 1 20.883192707444429 24.208948656845408 2010-Aug-26 23:03:18 LOG4 log_alfabeam: ALFABEAM 2 20.887385349820807 24.288066309807117 2010-Aug-26 23:03:18 LOG4 log_alfabeam: ALFABEAM 3 20.885041523041036 24.389277221412335 2010-Aug-26 23:03:18 LOG4 log_alfabeam: ALFABEAM 4 20.878316178210937 24.410512120766100 2010-Aug-26 23:03:18 LOG4 log_alfabeam: ALFABEAM 5 20.874110546650108 24.330116299803269 2010-Aug-26 23:03:18 LOG4 log_alfabeam: ALFABEAM 6 20.876642712578455 24.229779436420706 2010-Aug-26 23:03:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800096 2010-Aug-26 23:03:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:03:18 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-Aug-26 23:03:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:03:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-26 23:03:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:03:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:03:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:03:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-26 23:03:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10999.00 2010-Aug-26 23:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:03:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:03:29 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-Aug-26 23:03:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:03:29 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-Aug-26 23:03:29 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-Aug-26 23:03:29 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-26 23:03:29 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-26 23:03:29 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:03:29 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:03:29 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:03:29 LOG2 antvel: Parameters to Doppler: Topocentric 97409 2010 238 0.0 2010-Aug-26 23:03:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:03:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-26 23:03:29 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-26 23:03:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:03:29 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:03:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-26 23:03:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:03:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-Aug-26 23:03:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:03:29 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Aug-26 23:03:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-26 23:03:29 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.957654 2010.6542388838188 18.999933 2010-Aug-26 23:03:29 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777805 24.309805555555553 2010-Aug-26 23:03:29 LOG4 log_alfabeam: ALFABEAM 1 20.883249883523550 24.209208010741541 2010-Aug-26 23:03:29 LOG4 log_alfabeam: ALFABEAM 2 20.887397545088604 24.288768863268032 2010-Aug-26 23:03:29 LOG4 log_alfabeam: ALFABEAM 3 20.884996175948089 24.389727543754233 2010-Aug-26 23:03:29 LOG4 log_alfabeam: ALFABEAM 4 20.878259054539214 24.410247990350133 2010-Aug-26 23:03:29 LOG4 log_alfabeam: ALFABEAM 5 20.874099265370216 24.329409104500535 2010-Aug-26 23:03:29 LOG4 log_alfabeam: ALFABEAM 6 20.876688179535449 24.229343400257832 2010-Aug-26 23:03:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800097 2010-Aug-26 23:03:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:03:30 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Aug-26 23:03:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:03:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-26 23:03:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:03:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:03:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:03:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-26 23:03:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11011.00 2010-Aug-26 23:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:03:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:03:41 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Aug-26 23:03:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:03:41 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Aug-26 23:03:41 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-Aug-26 23:03:41 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-26 23:03:41 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-26 23:03:41 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:03:41 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:03:41 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:03:41 LOG2 antvel: Parameters to Doppler: Topocentric 97421 2010 238 0.0 2010-Aug-26 23:03:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:03:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-26 23:03:41 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-26 23:03:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:03:41 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:03:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-26 23:03:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:03:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-Aug-26 23:03:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:03:41 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Aug-26 23:03:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-26 23:03:41 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.960996 2010.6542392640758 18.999933 2010-Aug-26 23:03:41 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777805 24.309805555555549 2010-Aug-26 23:03:41 LOG4 log_alfabeam: ALFABEAM 1 20.883306776381783 24.209472790473708 2010-Aug-26 23:03:41 LOG4 log_alfabeam: ALFABEAM 2 20.887409314818591 24.289471053153424 2010-Aug-26 23:03:41 LOG4 log_alfabeam: ALFABEAM 3 20.884950679306996 24.390171991946424 2010-Aug-26 23:03:41 LOG4 log_alfabeam: ALFABEAM 4 20.878202219738231 24.409978465320847 2010-Aug-26 23:03:41 LOG4 log_alfabeam: ALFABEAM 5 20.874088412728874 24.328702467225536 2010-Aug-26 23:03:41 LOG4 log_alfabeam: ALFABEAM 6 20.876733779216021 24.228913229682828 2010-Aug-26 23:03:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800098 2010-Aug-26 23:03:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:03:42 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Aug-26 23:03:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:03:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-26 23:03:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:03:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:03:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:03:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-26 23:03:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11023.00 2010-Aug-26 23:03:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:03:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:03:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:03:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:03:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:03:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:03:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:03:53 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Aug-26 23:03:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:03:53 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Aug-26 23:03:53 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-Aug-26 23:03:53 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-26 23:03:53 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-26 23:03:53 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:03:53 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:03:53 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:03:53 LOG2 antvel: Parameters to Doppler: Topocentric 97433 2010 238 0.0 2010-Aug-26 23:03:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:03:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-26 23:03:53 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-26 23:03:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:03:53 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:03:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-26 23:03:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:03:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-Aug-26 23:03:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:03:53 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Aug-26 23:03:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-26 23:03:53 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.964339 2010.6542396443328 18.999933 2010-Aug-26 23:03:53 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777791 24.309805555555556 2010-Aug-26 23:03:53 LOG4 log_alfabeam: ALFABEAM 1 20.883363394714355 24.209742990730600 2010-Aug-26 23:03:53 LOG4 log_alfabeam: ALFABEAM 2 20.887420663245582 24.290172965769983 2010-Aug-26 23:03:53 LOG4 log_alfabeam: ALFABEAM 3 20.884905028727935 24.390610657804082 2010-Aug-26 23:03:53 LOG4 log_alfabeam: ALFABEAM 4 20.878145665070733 24.409703551031715 2010-Aug-26 23:03:53 LOG4 log_alfabeam: ALFABEAM 5 20.874077984419014 24.327996300558095 2010-Aug-26 23:03:53 LOG4 log_alfabeam: ALFABEAM 6 20.876779516121800 24.228488832157925 2010-Aug-26 23:03:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800099 2010-Aug-26 23:03:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:03:54 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-Aug-26 23:03:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:03:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-26 23:03:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:03:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:03:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:03:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-26 23:03:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11035.00 2010-Aug-26 23:03:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:03:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:03:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:03:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:03:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:03:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:03:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:04:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:04:05 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-Aug-26 23:04:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:04:05 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Aug-26 23:04:05 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-Aug-26 23:04:05 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-26 23:04:05 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-26 23:04:05 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:04:05 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:04:05 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:04:05 LOG2 antvel: Parameters to Doppler: Topocentric 97445 2010 238 0.0 2010-Aug-26 23:04:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:04:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-26 23:04:05 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-26 23:04:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:04:05 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:04:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-26 23:04:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:04:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-Aug-26 23:04:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:04:05 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Aug-26 23:04:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-26 23:04:05 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.967681 2010.6542400245899 18.999933 2010-Aug-26 23:04:05 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777766 24.309805555555553 2010-Aug-26 23:04:05 LOG4 log_alfabeam: ALFABEAM 1 20.883419696662340 24.210018360880273 2010-Aug-26 23:04:05 LOG4 log_alfabeam: ALFABEAM 2 20.887431584693026 24.290874058789647 2010-Aug-26 23:04:05 LOG4 log_alfabeam: ALFABEAM 3 20.884859260809829 24.391043243680588 2010-Aug-26 23:04:05 LOG4 log_alfabeam: ALFABEAM 4 20.878089432292267 24.409423502344868 2010-Aug-26 23:04:05 LOG4 log_alfabeam: ALFABEAM 5 20.874067985220638 24.327291149363102 2010-Aug-26 23:04:05 LOG4 log_alfabeam: ALFABEAM 6 20.876825353701708 24.228070491864070 2010-Aug-26 23:04:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800100 2010-Aug-26 23:04:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:04:06 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Aug-26 23:04:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:04:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-26 23:04:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:04:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:04:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:04:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-26 23:04:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11047.00 2010-Aug-26 23:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:04:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:04:17 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Aug-26 23:04:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:04:17 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Aug-26 23:04:17 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-Aug-26 23:04:17 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-26 23:04:17 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-26 23:04:17 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:04:17 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:04:17 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:04:17 LOG2 antvel: Parameters to Doppler: Topocentric 97457 2010 238 0.0 2010-Aug-26 23:04:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:04:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-26 23:04:17 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-26 23:04:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:04:17 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:04:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-26 23:04:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:04:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-Aug-26 23:04:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:04:17 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Aug-26 23:04:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-26 23:04:17 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.971024 2010.6542404048469 18.999933 2010-Aug-26 23:04:17 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777766 24.309805555555553 2010-Aug-26 23:04:17 LOG4 log_alfabeam: ALFABEAM 1 20.883475708147014 24.210298974773000 2010-Aug-26 23:04:17 LOG4 log_alfabeam: ALFABEAM 2 20.887442087015366 24.291574630631352 2010-Aug-26 23:04:17 LOG4 log_alfabeam: ALFABEAM 3 20.884813357445520 24.391469976541348 2010-Aug-26 23:04:17 LOG4 log_alfabeam: ALFABEAM 4 20.878033495454709 24.409138243981914 2010-Aug-26 23:04:17 LOG4 log_alfabeam: ALFABEAM 5 20.874058407486945 24.326586712648577 2010-Aug-26 23:04:17 LOG4 log_alfabeam: ALFABEAM 6 20.876871310214725 24.227657985495046 2010-Aug-26 23:04:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800101 2010-Aug-26 23:04:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:04:18 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Aug-26 23:04:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:04:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-26 23:04:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:04:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:04:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:04:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-26 23:04:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11059.00 2010-Aug-26 23:04:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:04:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:04:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:04:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:04:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:04:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:04:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:04:29 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Aug-26 23:04:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:04:29 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Aug-26 23:04:29 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-Aug-26 23:04:29 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-26 23:04:29 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-26 23:04:29 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:04:29 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:04:29 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:04:29 LOG2 antvel: Parameters to Doppler: Topocentric 97469 2010 238 0.0 2010-Aug-26 23:04:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:04:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-26 23:04:29 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-26 23:04:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:04:29 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:04:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-26 23:04:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:04:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-Aug-26 23:04:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:04:29 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Aug-26 23:04:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-26 23:04:29 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.974366 2010.6542407851041 18.999933 2010-Aug-26 23:04:29 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777794 24.309805555555549 2010-Aug-26 23:04:29 LOG4 log_alfabeam: ALFABEAM 1 20.883531388110587 24.210584571800268 2010-Aug-26 23:04:29 LOG4 log_alfabeam: ALFABEAM 2 20.887452165448870 24.292274142461419 2010-Aug-26 23:04:29 LOG4 log_alfabeam: ALFABEAM 3 20.884767355359131 24.391890572480158 2010-Aug-26 23:04:29 LOG4 log_alfabeam: ALFABEAM 4 20.877977895499669 24.408848040661390 2010-Aug-26 23:04:29 LOG4 log_alfabeam: ALFABEAM 5 20.874049255086700 24.325883531281669 2010-Aug-26 23:04:29 LOG4 log_alfabeam: ALFABEAM 6 20.876917349025465 24.227251583651690 2010-Aug-26 23:04:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800102 2010-Aug-26 23:04:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:04:30 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Aug-26 23:04:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:04:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-26 23:04:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:04:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:04:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:04:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-26 23:04:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11071.00 2010-Aug-26 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:04:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:04:41 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Aug-26 23:04:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:04:41 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Aug-26 23:04:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Aug-26 23:04:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-26 23:04:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-26 23:04:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 23:04:41 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Aug-26 23:04:41 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 23:04:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-26 23:04:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 23:04:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 23:04:41 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Aug-26 23:04:41 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-Aug-26 23:04:41 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-26 23:04:41 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-26 23:04:41 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:04:41 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:04:41 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:04:41 LOG2 antvel: Parameters to Doppler: Topocentric 97481 2010 238 0.0 2010-Aug-26 23:04:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:04:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-26 23:04:41 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-26 23:04:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:04:41 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:04:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-26 23:04:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:04:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-Aug-26 23:04:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:04:41 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-Aug-26 23:04:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-Aug-26 23:04:41 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.977709 2010.6542411653611 18.999933 2010-Aug-26 23:04:41 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777812 24.309805555555549 2010-Aug-26 23:04:41 LOG4 log_alfabeam: ALFABEAM 1 20.883586762548216 24.210875228398727 2010-Aug-26 23:04:41 LOG4 log_alfabeam: ALFABEAM 2 20.887461827742452 24.292972894625386 2010-Aug-26 23:04:41 LOG4 log_alfabeam: ALFABEAM 3 20.884721236261012 24.392305257857927 2010-Aug-26 23:04:41 LOG4 log_alfabeam: ALFABEAM 4 20.877922606405448 24.408552814480714 2010-Aug-26 23:04:41 LOG4 log_alfabeam: ALFABEAM 5 20.874040520485966 24.325181302309684 2010-Aug-26 23:04:41 LOG4 log_alfabeam: ALFABEAM 6 20.876963488575875 24.226851063745830 2010-Aug-26 23:04:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800103 2010-Aug-26 23:04:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:04:42 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-Aug-26 23:04:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:04:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-26 23:04:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:04:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:04:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:04:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-26 23:04:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11083.00 2010-Aug-26 23:04:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:04:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:04:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:04:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:04:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:04:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:04:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:04:53 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-Aug-26 23:04:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:04:53 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-Aug-26 23:04:53 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-Aug-26 23:04:53 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-26 23:04:53 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-26 23:04:53 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:04:53 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:04:53 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:04:53 LOG2 antvel: Parameters to Doppler: Topocentric 97493 2010 238 0.0 2010-Aug-26 23:04:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:04:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-26 23:04:53 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-26 23:04:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:04:53 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:04:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-26 23:04:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:04:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-Aug-26 23:04:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:04:53 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Aug-26 23:04:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-Aug-26 23:04:53 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.981051 2010.6542415456181 18.999933 2010-Aug-26 23:04:53 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777805 24.309805555555553 2010-Aug-26 23:04:53 LOG4 log_alfabeam: ALFABEAM 1 20.883641791236347 24.211170674635586 2010-Aug-26 23:04:53 LOG4 log_alfabeam: ALFABEAM 2 20.887471070025370 24.293670352423085 2010-Aug-26 23:04:53 LOG4 log_alfabeam: ALFABEAM 3 20.884675036946000 24.392713762502499 2010-Aug-26 23:04:53 LOG4 log_alfabeam: ALFABEAM 4 20.877867668267427 24.408252839355391 2010-Aug-26 23:04:53 LOG4 log_alfabeam: ALFABEAM 5 20.874032206664488 24.324480561972354 2010-Aug-26 23:04:53 LOG4 log_alfabeam: ALFABEAM 6 20.877009692199241 24.226456682834261 2010-Aug-26 23:04:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800104 2010-Aug-26 23:04:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:04:54 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Aug-26 23:04:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:04:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-26 23:04:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:04:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:04:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:04:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-26 23:04:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11095.00 2010-Aug-26 23:04:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:04:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:04:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:04:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:04:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:04:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:04:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:05:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:05:05 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Aug-26 23:05:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:05:05 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Aug-26 23:05:05 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-Aug-26 23:05:05 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-26 23:05:05 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-26 23:05:05 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:05:05 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:05:05 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:05:05 LOG2 antvel: Parameters to Doppler: Topocentric 97505 2010 238 0.0 2010-Aug-26 23:05:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:05:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-26 23:05:05 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-26 23:05:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:05:05 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:05:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-26 23:05:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:05:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-Aug-26 23:05:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:05:05 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Aug-26 23:05:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-Aug-26 23:05:05 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.984394 2010.6542419258751 18.999933 2010-Aug-26 23:05:05 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777819 24.309805555555556 2010-Aug-26 23:05:05 LOG4 log_alfabeam: ALFABEAM 1 20.883696500240063 24.211470989741848 2010-Aug-26 23:05:05 LOG4 log_alfabeam: ALFABEAM 2 20.887479899927907 24.294366818183079 2010-Aug-26 23:05:05 LOG4 log_alfabeam: ALFABEAM 3 20.884628738932538 24.393116312017536 2010-Aug-26 23:05:05 LOG4 log_alfabeam: ALFABEAM 4 20.877813054994753 24.407948034550412 2010-Aug-26 23:05:05 LOG4 log_alfabeam: ALFABEAM 5 20.874024306214707 24.323781005308717 2010-Aug-26 23:05:05 LOG4 log_alfabeam: ALFABEAM 6 20.877055978529363 24.226068219206024 2010-Aug-26 23:05:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800105 2010-Aug-26 23:05:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:05:06 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-Aug-26 23:05:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:05:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-26 23:05:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:05:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:05:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:05:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-26 23:05:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11107.00 2010-Aug-26 23:05:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:05:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:05:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:05:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:05:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:05:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:05:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:05:17 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-Aug-26 23:05:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:05:17 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Aug-26 23:05:17 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-Aug-26 23:05:17 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-26 23:05:17 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-26 23:05:17 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:05:17 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:05:17 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:05:17 LOG2 antvel: Parameters to Doppler: Topocentric 97517 2010 238 0.0 2010-Aug-26 23:05:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:05:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-26 23:05:17 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-26 23:05:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:05:17 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:05:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-26 23:05:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:05:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-Aug-26 23:05:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:05:17 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Aug-26 23:05:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-Aug-26 23:05:17 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.987736 2010.6542423061323 18.999933 2010-Aug-26 23:05:17 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777805 24.309805555555553 2010-Aug-26 23:05:17 LOG4 log_alfabeam: ALFABEAM 1 20.883750850198997 24.211775895126070 2010-Aug-26 23:05:17 LOG4 log_alfabeam: ALFABEAM 2 20.887488314449822 24.295061761942922 2010-Aug-26 23:05:17 LOG4 log_alfabeam: ALFABEAM 3 20.884582379033116 24.393512649908754 2010-Aug-26 23:05:17 LOG4 log_alfabeam: ALFABEAM 4 20.877758805808085 24.407638682506025 2010-Aug-26 23:05:17 LOG4 log_alfabeam: ALFABEAM 5 20.874016821252038 24.323083163338268 2010-Aug-26 23:05:17 LOG4 log_alfabeam: ALFABEAM 6 20.877102310919572 24.225685916457682 2010-Aug-26 23:05:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800106 2010-Aug-26 23:05:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:05:18 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-Aug-26 23:05:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:05:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-26 23:05:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:05:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:05:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:05:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-26 23:05:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11119.00 2010-Aug-26 23:05:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:05:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:05:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:05:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:05:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:05:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:05:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:05:29 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-Aug-26 23:05:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:05:29 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Aug-26 23:05:29 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-Aug-26 23:05:29 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-26 23:05:29 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-26 23:05:29 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:05:29 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:05:29 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:05:29 LOG2 antvel: Parameters to Doppler: Topocentric 97529 2010 238 0.0 2010-Aug-26 23:05:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:05:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-26 23:05:29 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-26 23:05:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:05:29 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:05:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-26 23:05:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:05:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-Aug-26 23:05:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:05:29 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Aug-26 23:05:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-Aug-26 23:05:29 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.991079 2010.6542426863894 18.999933 2010-Aug-26 23:05:29 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777805 24.309805555555549 2010-Aug-26 23:05:29 LOG4 log_alfabeam: ALFABEAM 1 20.883804867242269 24.212085473017723 2010-Aug-26 23:05:29 LOG4 log_alfabeam: ALFABEAM 2 20.887496321089198 24.295755488049778 2010-Aug-26 23:05:29 LOG4 log_alfabeam: ALFABEAM 3 20.884535938565872 24.393903000851946 2010-Aug-26 23:05:29 LOG4 log_alfabeam: ALFABEAM 4 20.877704894553897 24.407324699450839 2010-Aug-26 23:05:29 LOG4 log_alfabeam: ALFABEAM 5 20.874009744509760 24.322386729065542 2010-Aug-26 23:05:29 LOG4 log_alfabeam: ALFABEAM 6 20.877148708202981 24.225309553930941 2010-Aug-26 23:05:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800107 2010-Aug-26 23:05:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:05:30 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-Aug-26 23:05:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:05:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-26 23:05:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:05:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:05:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:05:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-26 23:05:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11131.00 2010-Aug-26 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:05:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:05:41 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-Aug-26 23:05:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:05:41 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Aug-26 23:05:41 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-Aug-26 23:05:41 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-26 23:05:41 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-26 23:05:41 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:05:41 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:05:41 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:05:41 LOG2 antvel: Parameters to Doppler: Topocentric 97541 2010 238 0.0 2010-Aug-26 23:05:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:05:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-26 23:05:41 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-26 23:05:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:05:41 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:05:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-26 23:05:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:05:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-Aug-26 23:05:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:05:41 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Aug-26 23:05:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-Aug-26 23:05:41 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.994421 2010.6542430666464 18.999933 2010-Aug-26 23:05:41 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777805 24.309805555555567 2010-Aug-26 23:05:41 LOG4 log_alfabeam: ALFABEAM 1 20.883858512897721 24.212399436841324 2010-Aug-26 23:05:41 LOG4 log_alfabeam: ALFABEAM 2 20.887503917691387 24.296447471846449 2010-Aug-26 23:05:41 LOG4 log_alfabeam: ALFABEAM 3 20.884489454309712 24.394287121927267 2010-Aug-26 23:05:41 LOG4 log_alfabeam: ALFABEAM 4 20.877651359553987 24.407006375670267 2010-Aug-26 23:05:41 LOG4 log_alfabeam: ALFABEAM 5 20.874003077265673 24.321692227736182 2010-Aug-26 23:05:41 LOG4 log_alfabeam: ALFABEAM 6 20.877195133802509 24.224939361891348 2010-Aug-26 23:05:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800108 2010-Aug-26 23:05:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:05:42 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Aug-26 23:05:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:05:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-26 23:05:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:05:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:05:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:05:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-26 23:05:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11143.00 2010-Aug-26 23:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:05:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:05:53 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Aug-26 23:05:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:05:53 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Aug-26 23:05:53 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-Aug-26 23:05:53 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-26 23:05:53 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-26 23:05:53 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:05:53 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:05:53 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:05:53 LOG2 antvel: Parameters to Doppler: Topocentric 97553 2010 238 0.0 2010-Aug-26 23:05:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:05:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-26 23:05:53 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-26 23:05:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:05:53 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:05:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-26 23:05:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:05:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-Aug-26 23:05:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-26 23:05:53 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Aug-26 23:05:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-Aug-26 23:05:53 LOG5 log_alfabeam: Parameters: 20.880777777777777 24.309805555555553 20.997764 2010.6542434469034 18.999933 2010-Aug-26 23:05:53 LOG4 log_alfabeam: ALFABEAM 0 20.880777777777787 24.309805555555549 2010-Aug-26 23:05:53 LOG4 log_alfabeam: ALFABEAM 1 20.883911813350711 24.212717872022235 2010-Aug-26 23:05:53 LOG4 log_alfabeam: ALFABEAM 2 20.887511111608074 24.297138019712918 2010-Aug-26 23:05:53 LOG4 log_alfabeam: ALFABEAM 3 20.884442907375409 24.394665236696476 2010-Aug-26 23:05:53 LOG4 log_alfabeam: ALFABEAM 4 20.877598174600017 24.406683624159250 2010-Aug-26 23:05:53 LOG4 log_alfabeam: ALFABEAM 5 20.873996812408500 24.320999350315841 2010-Aug-26 23:05:53 LOG4 log_alfabeam: ALFABEAM 6 20.877241606756687 24.224575120922779 2010-Aug-26 23:05:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23800109 2010-Aug-26 23:05:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-26 23:05:54 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-Aug-26 23:05:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:05:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-26 23:05:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:05:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:05:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:05:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-26 23:05:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11155.00 2010-Aug-26 23:05:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:05:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:05:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:05:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:05:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:05:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:05:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:06:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:06:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-26 23:06:05 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-Aug-26 23:06:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-26 23:06:05 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Aug-26 23:06:05 INFO2 smartfreq: Switching off CAL 2010-Aug-26 23:06:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-26 23:06:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-26 23:06:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 23:06:05 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Aug-26 23:06:05 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 23:06:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-26 23:06:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 23:06:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 23:06:05 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Aug-26 23:06:05 INFO3 restore_frequencies: Restoring original frequencies 2010-Aug-26 23:06:05 LOG5 antvel: Calling 'antvel 205250.800000 241835.300000 J Topocentric 0' 2010-Aug-26 23:06:05 LOG2 antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65424 J 2010-Aug-26 23:06:05 LOG2 antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:06:05 LOG2 antvel: Parameters to Doppler: Topocentric 97565 2010 238 0.0 2010-Aug-26 23:06:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:06:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-Aug-26 23:06:05 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-Aug-26 23:06:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:06:05 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:06:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-26 23:06:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:06:05 STOP finish_task: Finishing task 'smart frequency switching' 2010-Aug-26 23:06:05 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-26 23:06:05 DONE finish_task: DONE finished pattern: smart frequency switching 2010-Aug-26 23:06:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-26 23:06:05 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2010-Aug-26 23:06:05 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-26 23:06:05 NOTE run_command_file: DONE with command file processing 2010-Aug-26 23:06:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Aug-26 23:06:06 STOP finish_task: Finishing task 'running command file 'command_galfasrc_aug10.cmd'' 2010-Aug-26 23:06:06 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-26 23:06:06 DONE finish_task: DONE finished running: command file 'command_galfasrc_aug10.cmd' 2010-Aug-26 23:06:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-26 23:06:06 END end_task: Finishing task 'running command file 'command_galfasrc_aug10.cmd'' with status 'OK' 2010-Aug-26 23:06:06 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-26 23:06:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-26 23:06:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:06:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:06:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:07:21 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2010.conf' 2010-Aug-26 23:07:22 LOG2 CIMA-antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65425 J 2010-Aug-26 23:07:22 LOG2 CIMA-antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:07:22 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 97641 2010 238 0.0 2010-Aug-26 23:07:22 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Aug-26 23:07:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-26 23:07:23 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2010-Aug-26 23:07:23 LOG4 exec_msg: From OBSERVER: config_iflo 2010-Aug-26 23:07:23 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Aug-26 23:07:23 LOG5 begin_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2010-Aug-26 23:07:23 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Aug-26 23:07:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Aug-26 23:07:23 LOG1 config_iflo: Receiver ALFA already selected 2010-Aug-26 23:07:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-26 23:07:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-26 23:07:23 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-26 23:07:23 LOG5 begin_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2010-Aug-26 23:07:23 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-26 23:07:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-26 23:07:23 LOG5 end_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2010-Aug-26 23:07:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-26 23:07:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-26 23:07:24 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Aug-26 23:07:24 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Aug-26 23:07:24 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Aug-26 23:07:24 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Aug-26 23:07:24 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Aug-26 23:07:24 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Aug-26 23:07:24 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Aug-26 23:07:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-26 23:07:24 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Aug-26 23:07:24 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Aug-26 23:07:24 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Aug-26 23:07:24 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Aug-26 23:07:24 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Aug-26 23:07:24 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Aug-26 23:07:24 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Aug-26 23:07:24 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Aug-26 23:07:24 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Aug-26 23:07:24 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Aug-26 23:07:24 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Aug-26 23:07:24 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Aug-26 23:07:24 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Aug-26 23:07:24 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Aug-26 23:07:24 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Aug-26 23:07:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:07:24 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Aug-26 23:07:24 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Aug-26 23:07:24 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Aug-26 23:07:24 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Aug-26 23:07:24 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Aug-26 23:07:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Aug-26 23:07:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:07:24 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Aug-26 23:07:24 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Aug-26 23:07:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-26 23:07:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Aug-26 23:07:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:07:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:07:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:07:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:07:24 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-Aug-26 23:07:24 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Aug-26 23:07:24 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Aug-26 23:07:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Aug-26 23:07:24 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Aug-26 23:07:24 LOG5 finish_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2010-Aug-26 23:07:24 DONE finish_task: DONE finished configuration: IF/LO path 2010-Aug-26 23:07:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-26 23:07:24 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Aug-26 23:07:24 LOG5 end_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2010-Aug-26 23:07:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:07:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Aug-26 23:07:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Aug-26 23:07:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Aug-26 23:07:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Aug-26 23:07:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Aug-26 23:07:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Aug-26 23:07:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Aug-26 23:07:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Aug-26 23:07:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-26 23:07:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-26 23:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-26 23:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-26 23:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Aug-26 23:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Aug-26 23:07:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Aug-26 23:07:25 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2010-Aug-26 23:07:25 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2010-Aug-26 23:07:25 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Aug-26 23:07:25 LOG5 begin_task: Level: (1) ID = <10102> Status = 0 0 0 0 ok 2010-Aug-26 23:07:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Aug-26 23:07:25 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Aug-26 23:07:25 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Aug-26 23:07:25 START begin_task: Starting task 'selecting calibration port' 2010-Aug-26 23:07:25 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2010-Aug-26 23:07:25 LOG3 vw_send: To DATATAKING: calport 3 2010-Aug-26 23:07:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Aug-26 23:07:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:07:25 START begin_task: Starting task 'waiting on calport' 2010-Aug-26 23:07:25 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2010-Aug-26 23:07:25 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2010-Aug-26 23:07:25 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Aug-26 23:07:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:07:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:07:25 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-26 23:07:25 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Aug-26 23:07:25 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2010-Aug-26 23:07:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Aug-26 23:07:25 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Aug-26 23:07:25 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2010-Aug-26 23:07:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-26 23:07:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-26 23:07:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 23:07:25 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2010-Aug-26 23:07:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:07:25 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 23:07:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-26 23:07:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 23:07:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 23:07:25 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2010-Aug-26 23:07:25 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Aug-26 23:07:25 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Aug-26 23:07:25 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Aug-26 23:07:25 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Aug-26 23:07:25 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Aug-26 23:07:25 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Aug-26 23:07:25 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Aug-26 23:07:25 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Aug-26 23:07:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:07:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:07:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:07:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:07:25 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Aug-26 23:07:25 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Aug-26 23:07:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 23:07:25 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2010-Aug-26 23:07:26 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 23:07:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Aug-26 23:07:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-26 23:07:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Aug-26 23:07:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 23:07:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 23:07:26 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2010-Aug-26 23:07:26 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Aug-26 23:07:26 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Aug-26 23:07:26 LOG5 finish_task: Level: (1) ID = <10102> Status = 0 0 0 0 ok 2010-Aug-26 23:07:26 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Aug-26 23:07:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-26 23:07:26 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Aug-26 23:07:26 LOG5 end_task: Level: (1) ID = <10102> Status = 0 0 0 0 ok 2010-Aug-26 23:07:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-26 23:07:26 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-26 23:07:26 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2010-Aug-26 23:07:26 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2010-Aug-26 23:07:26 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-26 23:07:26 LOG5 begin_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2010-Aug-26 23:07:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-26 23:07:26 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-26 23:07:26 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Aug-26 23:07:26 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-26 23:07:26 LOG5 finish_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2010-Aug-26 23:07:26 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-26 23:07:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-26 23:07:26 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-26 23:07:26 LOG5 end_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2010-Aug-26 23:07:27 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2010.conf' applied. 2010-Aug-26 23:07:27 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-26 23:07:27 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-26 23:07:48 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Aug-26 23:07:48 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Aug-26 23:07:48 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Aug-26 23:07:48 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Aug-26 23:07:48 LOG5 begin_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Aug-26 23:07:48 NOTE restart_wapp: Restarting all WAPPs 2010-Aug-26 23:07:48 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Aug-26 23:07:48 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Aug-26 23:07:48 LOG5 end_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Aug-26 23:07:48 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-26 23:07:48 LOG3 exec_msg: Closing socket 2010-Aug-26 23:07:48 LOG3 exec_msg: Closing socket 2010-Aug-26 23:07:48 LOG3 exec_msg: Closing socket 2010-Aug-26 23:07:48 LOG3 exec_msg: Closing socket 2010-Aug-26 23:07:50 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Aug-26 23:07:50 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Aug-26 23:07:51 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Aug-26 23:07:51 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Aug-26 23:08:15 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2010.conf' 2010-Aug-26 23:08:15 LOG2 CIMA-antvel: Precessing RA = 20:52:50.8 Dec = +24:18:35.3 Epoch = 2010.65425 J 2010-Aug-26 23:08:15 LOG2 CIMA-antvel: Computed apparent RA = 20:53:21.1 Dec = +24:21:14.4 2010-Aug-26 23:08:15 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 97695 2010 238 0.0 2010-Aug-26 23:08:15 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Aug-26 23:08:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-26 23:08:17 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2010-Aug-26 23:08:17 LOG4 exec_msg: From OBSERVER: config_iflo 2010-Aug-26 23:08:17 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Aug-26 23:08:17 LOG5 begin_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2010-Aug-26 23:08:17 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Aug-26 23:08:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Aug-26 23:08:17 LOG1 config_iflo: Receiver ALFA already selected 2010-Aug-26 23:08:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-26 23:08:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-26 23:08:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-26 23:08:17 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Aug-26 23:08:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-26 23:08:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-26 23:08:17 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Aug-26 23:08:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-26 23:08:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-26 23:08:17 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Aug-26 23:08:17 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Aug-26 23:08:17 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Aug-26 23:08:17 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Aug-26 23:08:17 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Aug-26 23:08:17 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Aug-26 23:08:17 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Aug-26 23:08:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-26 23:08:17 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Aug-26 23:08:17 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Aug-26 23:08:17 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Aug-26 23:08:17 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Aug-26 23:08:17 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Aug-26 23:08:17 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Aug-26 23:08:17 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Aug-26 23:08:17 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Aug-26 23:08:17 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Aug-26 23:08:17 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Aug-26 23:08:17 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Aug-26 23:08:17 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2010-Aug-26 23:08:17 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Aug-26 23:08:17 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Aug-26 23:08:17 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Aug-26 23:08:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:08:17 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Aug-26 23:08:17 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Aug-26 23:08:17 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Aug-26 23:08:17 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Aug-26 23:08:17 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Aug-26 23:08:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Aug-26 23:08:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:08:17 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Aug-26 23:08:17 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Aug-26 23:08:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-26 23:08:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:08:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:08:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:08:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:08:18 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-26 23:08:18 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Aug-26 23:08:18 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Aug-26 23:08:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Aug-26 23:08:18 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Aug-26 23:08:18 LOG5 finish_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2010-Aug-26 23:08:18 DONE finish_task: DONE finished configuration: IF/LO path 2010-Aug-26 23:08:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-26 23:08:18 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Aug-26 23:08:18 LOG5 end_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2010-Aug-26 23:08:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:08:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Aug-26 23:08:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Aug-26 23:08:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Aug-26 23:08:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Aug-26 23:08:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Aug-26 23:08:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Aug-26 23:08:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Aug-26 23:08:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Aug-26 23:08:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-26 23:08:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-26 23:08:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-26 23:08:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-26 23:08:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Aug-26 23:08:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Aug-26 23:08:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Aug-26 23:08:18 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2010-Aug-26 23:08:18 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2010-Aug-26 23:08:18 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Aug-26 23:08:18 LOG5 begin_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2010-Aug-26 23:08:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Aug-26 23:08:18 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Aug-26 23:08:18 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Aug-26 23:08:18 START begin_task: Starting task 'selecting calibration port' 2010-Aug-26 23:08:18 LOG5 begin_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Aug-26 23:08:18 LOG3 vw_send: To DATATAKING: calport 3 2010-Aug-26 23:08:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Aug-26 23:08:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:08:18 START begin_task: Starting task 'waiting on calport' 2010-Aug-26 23:08:18 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-Aug-26 23:08:18 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2010-Aug-26 23:08:18 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Aug-26 23:08:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:08:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:08:19 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-26 23:08:19 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Aug-26 23:08:19 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-Aug-26 23:08:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Aug-26 23:08:19 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Aug-26 23:08:19 LOG5 end_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Aug-26 23:08:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-26 23:08:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-26 23:08:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 23:08:19 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2010-Aug-26 23:08:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:08:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 23:08:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-26 23:08:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 23:08:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 23:08:19 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2010-Aug-26 23:08:19 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Aug-26 23:08:19 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Aug-26 23:08:19 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Aug-26 23:08:19 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Aug-26 23:08:19 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Aug-26 23:08:19 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Aug-26 23:08:19 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Aug-26 23:08:19 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Aug-26 23:08:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:08:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:08:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:08:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:08:19 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Aug-26 23:08:19 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Aug-26 23:08:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 23:08:19 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2010-Aug-26 23:08:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Aug-26 23:08:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Aug-26 23:08:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 23:08:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-26 23:08:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-26 23:08:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 23:08:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 23:08:19 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2010-Aug-26 23:08:19 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Aug-26 23:08:19 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Aug-26 23:08:19 LOG5 finish_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2010-Aug-26 23:08:19 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Aug-26 23:08:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-26 23:08:19 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Aug-26 23:08:19 LOG5 end_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2010-Aug-26 23:08:19 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-26 23:08:19 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2010-Aug-26 23:08:19 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2010-Aug-26 23:08:19 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-26 23:08:19 LOG5 begin_task: Level: (1) ID = <10117> Status = 0 0 0 0 ok 2010-Aug-26 23:08:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-26 23:08:19 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-26 23:08:19 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Aug-26 23:08:19 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-26 23:08:19 LOG5 finish_task: Level: (1) ID = <10117> Status = 0 0 0 0 ok 2010-Aug-26 23:08:19 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-26 23:08:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-26 23:08:19 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-26 23:08:19 LOG5 end_task: Level: (1) ID = <10117> Status = 0 0 0 0 ok 2010-Aug-26 23:08:20 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2010.conf' applied. 2010-Aug-26 23:08:20 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-26 23:08:20 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-26 23:09:51 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2010-Aug-26 23:09:51 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2010-Aug-26 23:09:51 BEGIN begin_task: Starting task 'adjusting WAPP power' 2010-Aug-26 23:09:51 LOG5 begin_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2010-Aug-26 23:09:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Aug-26 23:09:51 INFO2 adjust_power: Starting to adjust WAPP power 2010-Aug-26 23:09:51 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Aug-26 23:09:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Aug-26 23:09:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:09:51 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Aug-26 23:09:51 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2010-Aug-26 23:09:51 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Aug-26 23:09:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:09:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:09:54 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-26 23:09:54 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Aug-26 23:09:54 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2010-Aug-26 23:09:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Aug-26 23:09:54 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-26 23:09:54 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Aug-26 23:09:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Aug-26 23:09:54 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-26 23:09:54 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-26 23:09:54 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-26 23:09:54 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-26 23:09:54 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Aug-26 23:09:54 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-Aug-26 23:09:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Aug-26 23:09:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:09:54 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Aug-26 23:09:55 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 3 3 dB 2010-Aug-26 23:09:55 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 6 dB 2010-Aug-26 23:09:55 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Aug-26 23:09:55 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Aug-26 23:09:55 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Aug-26 23:09:55 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-Aug-26 23:09:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.880 0.949 ALFA beam 1: 0.948 1.018 2010-Aug-26 23:09:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.985 0.913 ALFA beam 3: 1.053 0.976 2010-Aug-26 23:09:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.078 0.881 ALFA beam 5: 1.092 0.883 2010-Aug-26 23:09:55 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.897 0.865 ALFA beam 7: 0.985 1.020 2010-Aug-26 23:09:55 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-26 23:09:55 LOG5 finish_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Aug-26 23:09:55 INFO2 finish_task: DONE finished adjusting: WAPP power 2010-Aug-26 23:09:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-26 23:09:55 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-26 23:09:55 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Aug-26 23:09:55 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2010-Aug-26 23:09:55 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-26 23:09:55 LOG5 finish_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2010-Aug-26 23:09:55 DONE finish_task: DONE finished adjusting: WAPP power levels 2010-Aug-26 23:09:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-26 23:09:55 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-26 23:09:55 LOG5 end_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2010-Aug-26 23:10:16 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2010-Aug-26 23:10:16 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift98p1 210000.0 +234330 J 0 Topocentric velocity(optical) 2010-Aug-26 23:10:16 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift98p1 210000.0 +234330 J 0 Topocentric velocity(optical)' 2010-Aug-26 23:10:16 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Aug-26 23:10:16 LOG5 begin_task: Level: (1) ID = <10122> Status = 0 0 0 0 ok 2010-Aug-26 23:10:16 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'Cur-pos' 2010-Aug-26 23:10:16 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Aug-26 23:10:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift98p1} 2010-Aug-26 23:10:16 INFO5 fixed_driftmap: Start: year = 2010.6542517491823 RA = 21:00:30.5 Dec = +23:46:13.8 2010-Aug-26 23:10:16 NOTE fixed_driftmap: Setting ZA to 5:25:00.1 ... 2010-Aug-26 23:10:16 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 5.42 2010-Aug-26 23:10:16 LOG3 track_source: Calling 'track_source drift98p1 180.0 5.4167045335 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-Aug-26 23:10:16 START begin_task: Starting task 'sending tracking commands' 2010-Aug-26 23:10:16 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Aug-26 23:10:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift98p1} INFO {Slewing to source 'drift98p1' ...} 2010-Aug-26 23:10:16 INFO1 track_source: Starting to track drift98p1 2010-Aug-26 23:10:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift98p1" 2010-Aug-26 23:10:16 LOG3 vw_send: To DATATAKING: set ra 180.0 2010-Aug-26 23:10:16 LOG3 vw_send: To DATATAKING: set dec 5.4167045335 2010-Aug-26 23:10:16 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-26 23:10:16 LOG3 vw_send: To DATATAKING: pnt tr 180.0 5.4167045335 -CF 2010-Aug-26 23:10:16 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-26 23:10:16 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-26 23:10:16 LOG5 finish_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Aug-26 23:10:16 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-26 23:10:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-26 23:10:16 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-26 23:10:16 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Aug-26 23:10:16 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-26 23:10:16 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2010-Aug-26 23:10:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-26 23:10:16 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-26 23:10:16 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2010-Aug-26 23:10:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Aug-26 23:10:16 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Aug-26 23:10:16 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Aug-26 23:10:16 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift98p1" 2010-Aug-26 23:10:16 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2010-Aug-26 23:10:16 LOG4 got_cormsg: From DATATAKING: set dec 5.4167045335 2010-Aug-26 23:10:16 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2010-Aug-26 23:10:16 LOG4 got_cormsg: From DATATAKING: vw% 5.4167045335 2010-Aug-26 23:10:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:10:16 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-26 23:10:16 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 5.4167045335 -CF 2010-Aug-26 23:10:16 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-26 23:10:16 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-26 23:10:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:10:17 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-26 23:10:17 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-26 23:10:17 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Aug-26 23:10:17 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Aug-26 23:10:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-26 23:10:17 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-26 23:10:17 LOG5 finish_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2010-Aug-26 23:10:17 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-26 23:10:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-26 23:10:17 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-26 23:10:17 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2010-Aug-26 23:10:17 START begin_task: Starting task 'waiting on telescope' 2010-Aug-26 23:10:17 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2010-Aug-26 23:10:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-26 23:10:17 LOG3 waittrk: Start waittrk 5 2010-Aug-26 23:10:17 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-26 23:10:17 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-Aug-26 23:10:22 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-26 23:10:22 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-Aug-26 23:10:22 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-26 23:10:22 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Aug-26 23:11:22 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-26 23:11:22 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Aug-26 23:11:22 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-26 23:11:22 INFO2 waittrk: Now tracking drift98p1 2010-Aug-26 23:11:22 LOG4 waittrk: Current telescope position: Az = 179.75 ZA = 5.44 2010-Aug-26 23:11:22 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-26 23:11:22 LOG5 finish_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2010-Aug-26 23:11:22 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-26 23:11:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-26 23:11:22 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-26 23:11:22 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2010-Aug-26 23:11:22 START begin_task: Starting task 'selecting calibration type' 2010-Aug-26 23:11:22 LOG5 begin_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2010-Aug-26 23:11:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-26 23:11:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-26 23:11:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:11:22 START begin_task: Starting task 'waiting on setcal' 2010-Aug-26 23:11:22 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-Aug-26 23:11:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-26 23:11:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:11:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:11:22 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-26 23:11:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-26 23:11:22 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-Aug-26 23:11:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-26 23:11:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-26 23:11:22 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-26 23:11:22 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-26 23:11:22 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-Aug-26 23:11:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:11:23 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-26 23:11:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-26 23:11:23 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-Aug-26 23:11:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-26 23:11:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-26 23:11:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-26 23:11:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-26 23:11:23 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-26 23:11:23 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-Aug-26 23:11:23 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-26 23:11:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-26 23:11:23 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-Aug-26 23:11:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-26 23:11:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-26 23:11:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-26 23:11:23 LOG5 end_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2010-Aug-26 23:11:23 LOG5 dopset_later: Calling 'dopset_later 0' 2010-Aug-26 23:11:23 INFO3 dopset_later: Setting Doppler correction now 2010-Aug-26 23:11:23 LOG5 antvel: Calling 'antvel 180.000000 5.416705 F Topocentric 0' 2010-Aug-26 23:11:23 LOG2 antvel: Transforming current Az = 180.00 ZA = 5.42 to apparent RA = 21:05:22.9 Dec = +23:46:13.8 2010-Aug-26 23:11:23 LOG2 antvel: Parameters to Doppler: Topocentric 97883 2010 238 0.0 2010-Aug-26 23:11:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-26 23:11:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-Aug-26 23:11:23 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-Aug-26 23:11:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-26 23:11:23 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-26 23:11:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-26 23:11:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:11:23 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-26 23:11:23 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2010-Aug-26 23:11:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Aug-26 23:11:23 INFO2 adjust_power: Starting to adjust WAPP power 2010-Aug-26 23:11:23 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Aug-26 23:11:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Aug-26 23:11:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:11:23 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Aug-26 23:11:23 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-Aug-26 23:11:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-26 23:11:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-26 23:11:23 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Aug-26 23:11:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:11:23 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-26 23:11:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:11:26 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-26 23:11:26 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Aug-26 23:11:26 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-Aug-26 23:11:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Aug-26 23:11:26 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-26 23:11:26 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2010-Aug-26 23:11:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Aug-26 23:11:26 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-26 23:11:26 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-26 23:11:26 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-26 23:11:26 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-26 23:11:26 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Aug-26 23:11:26 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-Aug-26 23:11:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Aug-26 23:11:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:11:27 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Aug-26 23:11:27 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 3 3 dB 2010-Aug-26 23:11:27 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 5 dB 2010-Aug-26 23:11:27 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Aug-26 23:11:27 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Aug-26 23:11:27 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Aug-26 23:11:27 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-Aug-26 23:11:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.948 0.992 ALFA beam 1: 0.944 1.013 2010-Aug-26 23:11:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.000 0.903 ALFA beam 3: 1.077 0.988 2010-Aug-26 23:11:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.100 0.902 ALFA beam 5: 1.091 1.127 2010-Aug-26 23:11:27 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.911 0.874 ALFA beam 7: 0.993 1.030 2010-Aug-26 23:11:27 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-26 23:11:27 LOG5 finish_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2010-Aug-26 23:11:27 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Aug-26 23:11:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-26 23:11:27 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-26 23:11:27 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2010-Aug-26 23:11:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-26 23:11:27 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-26 23:11:27 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2010-Aug-26 23:11:27 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Aug-26 23:11:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-26 23:11:27 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-26 23:11:27 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2010-Aug-26 23:11:27 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 21:00:30.5 LST = 21:05:25.9 diff = -295.3 secs 2010-Aug-26 23:11:27 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2010-Aug-26 23:11:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:11:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:11:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:11:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:11:27 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2010-Aug-26 23:11:27 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Aug-26 23:11:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-26 23:11:27 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-26 23:11:27 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-26 23:11:27 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2010-Aug-26 23:11:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-26 23:11:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-26 23:11:27 INFO2 take_data: Starting WAPP 600-second scan: 23800110 2010-Aug-26 23:11:28 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-26 23:11:28 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2010-Aug-26 23:11:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-26 23:11:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:11:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20100826.a2010.0001.fits 2010-Aug-26 23:11:28 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100826.a2010.0001.fits} 2010-Aug-26 23:11:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11489.00 2010-Aug-26 23:11:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-26 23:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:11:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:21:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:21:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-26 23:21:29 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2010-Aug-26 23:21:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-26 23:21:29 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2010-Aug-26 23:21:29 LOG1 fixed_driftmap: New position: year = 2010.6542731069535 RA = 21:15:00.7 RA/Dec = 21:15:31.6 +23:46:23.3 2010-Aug-26 23:21:29 NOTE fixed_driftmap: Correcting ZA to 5:25:09.6 ... 2010-Aug-26 23:21:29 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4193381401 -CF 2010-Aug-26 23:21:29 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-26 23:21:29 START begin_task: Starting task 'WAPP calibration' 2010-Aug-26 23:21:29 LOG5 begin_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2010-Aug-26 23:21:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-26 23:21:29 START begin_task: Starting task 'selecting calibration type' 2010-Aug-26 23:21:29 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Aug-26 23:21:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-26 23:21:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-26 23:21:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:21:29 START begin_task: Starting task 'waiting on setcal' 2010-Aug-26 23:21:29 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-Aug-26 23:21:29 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4193381401 -CF 2010-Aug-26 23:21:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:21:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-26 23:21:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:21:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:21:30 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-26 23:21:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-26 23:21:30 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-Aug-26 23:21:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-26 23:21:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-26 23:21:30 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-26 23:21:30 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-26 23:21:30 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2010-Aug-26 23:21:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:21:30 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-26 23:21:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-26 23:21:30 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2010-Aug-26 23:21:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-26 23:21:30 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-26 23:21:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-26 23:21:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-26 23:21:30 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-26 23:21:30 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2010-Aug-26 23:21:30 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-26 23:21:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-26 23:21:30 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2010-Aug-26 23:21:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-26 23:21:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-26 23:21:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-26 23:21:30 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Aug-26 23:21:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-26 23:21:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-26 23:21:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-26 23:21:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 23:21:30 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Aug-26 23:21:30 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 23:21:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-26 23:21:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 23:21:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 23:21:30 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Aug-26 23:21:30 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-26 23:21:30 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-26 23:21:30 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Aug-26 23:21:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-26 23:21:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-26 23:21:30 INFO2 take_data: Starting WAPP 1-second scan: 23800111 2010-Aug-26 23:21:30 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-26 23:21:30 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-Aug-26 23:21:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:21:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-26 23:21:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12091.00 2010-Aug-26 23:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:21:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:21:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:21:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-26 23:21:32 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-Aug-26 23:21:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-26 23:21:32 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Aug-26 23:21:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-26 23:21:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-26 23:21:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-26 23:21:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 23:21:32 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2010-Aug-26 23:21:32 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 23:21:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-26 23:21:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 23:21:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 23:21:32 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2010-Aug-26 23:21:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-26 23:21:32 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-26 23:21:32 LOG5 finish_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2010-Aug-26 23:21:32 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-26 23:21:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-26 23:21:32 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-26 23:21:32 LOG5 end_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2010-Aug-26 23:21:32 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2010-Aug-26 23:21:33 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Aug-26 23:21:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:21:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:21:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:21:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:21:33 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-26 23:21:33 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-26 23:21:33 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-26 23:21:33 LOG5 begin_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2010-Aug-26 23:21:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-26 23:21:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-26 23:21:33 INFO2 take_data: Starting WAPP 600-second scan: 23800112 2010-Aug-26 23:21:33 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-26 23:21:33 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2010-Aug-26 23:21:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-26 23:21:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:21:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-26 23:21:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12094.00 2010-Aug-26 23:21:33 NOTE WAPPDATA-new_file: New FITS file: wapp.20100826.a2010.0002.fits 2010-Aug-26 23:21:33 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100826.a2010.0002.fits} 2010-Aug-26 23:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:31:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:31:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-26 23:31:34 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2010-Aug-26 23:31:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-26 23:31:34 LOG5 end_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2010-Aug-26 23:31:34 LOG1 fixed_driftmap: New position: year = 2010.6542922782467 RA = 21:25:07.1 RA/Dec = 21:25:38.2 +23:46:29.3 2010-Aug-26 23:31:34 NOTE fixed_driftmap: Correcting ZA to 5:25:15.6 ... 2010-Aug-26 23:31:34 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4210002100 -CF 2010-Aug-26 23:31:34 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-26 23:31:34 START begin_task: Starting task 'WAPP calibration' 2010-Aug-26 23:31:34 LOG5 begin_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2010-Aug-26 23:31:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-26 23:31:34 START begin_task: Starting task 'selecting calibration type' 2010-Aug-26 23:31:34 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2010-Aug-26 23:31:34 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-26 23:31:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-26 23:31:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:31:34 START begin_task: Starting task 'waiting on setcal' 2010-Aug-26 23:31:34 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-Aug-26 23:31:34 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4210002100 -CF 2010-Aug-26 23:31:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:31:34 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-26 23:31:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:31:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:31:34 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-26 23:31:34 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-26 23:31:34 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-Aug-26 23:31:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-26 23:31:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-26 23:31:34 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-26 23:31:34 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-26 23:31:34 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2010-Aug-26 23:31:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:31:35 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-26 23:31:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-26 23:31:35 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2010-Aug-26 23:31:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-26 23:31:35 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-26 23:31:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-26 23:31:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-26 23:31:35 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-26 23:31:35 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2010-Aug-26 23:31:35 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-26 23:31:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-26 23:31:35 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2010-Aug-26 23:31:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-26 23:31:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-26 23:31:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-26 23:31:35 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2010-Aug-26 23:31:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-26 23:31:35 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-26 23:31:35 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-26 23:31:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 23:31:35 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-Aug-26 23:31:35 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 23:31:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-26 23:31:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 23:31:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 23:31:35 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-Aug-26 23:31:35 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-26 23:31:35 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-26 23:31:35 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-Aug-26 23:31:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-26 23:31:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-26 23:31:35 INFO2 take_data: Starting WAPP 1-second scan: 23800113 2010-Aug-26 23:31:35 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-26 23:31:35 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-Aug-26 23:31:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:31:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-26 23:31:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12696.00 2010-Aug-26 23:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:31:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:31:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:31:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-26 23:31:37 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-Aug-26 23:31:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-26 23:31:37 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-Aug-26 23:31:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-26 23:31:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-26 23:31:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-26 23:31:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 23:31:37 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-Aug-26 23:31:37 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 23:31:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-26 23:31:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 23:31:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 23:31:37 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-Aug-26 23:31:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-26 23:31:37 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-26 23:31:37 LOG5 finish_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2010-Aug-26 23:31:37 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-26 23:31:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-26 23:31:37 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-26 23:31:37 LOG5 end_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2010-Aug-26 23:31:37 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2010-Aug-26 23:31:37 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2010-Aug-26 23:31:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:31:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:31:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:31:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:31:38 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-26 23:31:38 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-26 23:31:38 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-26 23:31:38 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2010-Aug-26 23:31:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-26 23:31:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-26 23:31:38 INFO2 take_data: Starting WAPP 600-second scan: 23800114 2010-Aug-26 23:31:38 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-26 23:31:38 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2010-Aug-26 23:31:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-26 23:31:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:31:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-26 23:31:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12699.00 2010-Aug-26 23:31:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20100826.a2010.0003.fits 2010-Aug-26 23:31:38 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100826.a2010.0003.fits} 2010-Aug-26 23:31:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:31:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:31:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:31:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:31:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:31:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:31:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:31:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:31:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:41:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:41:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-26 23:41:39 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2010-Aug-26 23:41:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-26 23:41:39 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2010-Aug-26 23:41:39 LOG1 fixed_driftmap: New position: year = 2010.6543114495398 RA = 21:35:13.6 RA/Dec = 21:35:44.9 +23:46:35.0 2010-Aug-26 23:41:39 NOTE fixed_driftmap: Correcting ZA to 5:25:21.2 ... 2010-Aug-26 23:41:39 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4225690100 -CF 2010-Aug-26 23:41:39 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-26 23:41:39 START begin_task: Starting task 'WAPP calibration' 2010-Aug-26 23:41:39 LOG5 begin_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2010-Aug-26 23:41:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-26 23:41:39 START begin_task: Starting task 'selecting calibration type' 2010-Aug-26 23:41:39 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Aug-26 23:41:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-26 23:41:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-26 23:41:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:41:39 START begin_task: Starting task 'waiting on setcal' 2010-Aug-26 23:41:39 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-Aug-26 23:41:39 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4225690100 -CF 2010-Aug-26 23:41:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:41:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-26 23:41:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:41:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:41:39 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-26 23:41:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-26 23:41:39 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-Aug-26 23:41:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-26 23:41:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-26 23:41:39 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-26 23:41:39 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-26 23:41:39 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-Aug-26 23:41:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:41:40 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-26 23:41:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-26 23:41:40 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-Aug-26 23:41:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-26 23:41:40 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-26 23:41:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-26 23:41:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-26 23:41:40 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-26 23:41:40 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2010-Aug-26 23:41:40 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-26 23:41:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-26 23:41:40 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2010-Aug-26 23:41:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-26 23:41:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-26 23:41:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-26 23:41:40 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Aug-26 23:41:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-26 23:41:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-26 23:41:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-26 23:41:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 23:41:40 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-Aug-26 23:41:40 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 23:41:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-26 23:41:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 23:41:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 23:41:40 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-Aug-26 23:41:40 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-26 23:41:40 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-26 23:41:40 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-Aug-26 23:41:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-26 23:41:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-26 23:41:40 INFO2 take_data: Starting WAPP 1-second scan: 23800115 2010-Aug-26 23:41:40 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-26 23:41:40 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2010-Aug-26 23:41:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:41:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-26 23:41:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13301.00 2010-Aug-26 23:41:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:41:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:41:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:41:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:41:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:41:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:41:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:41:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:41:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:41:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:41:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-26 23:41:42 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2010-Aug-26 23:41:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-26 23:41:42 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-Aug-26 23:41:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-26 23:41:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-26 23:41:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-26 23:41:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 23:41:42 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Aug-26 23:41:42 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 23:41:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-26 23:41:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 23:41:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 23:41:42 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Aug-26 23:41:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-26 23:41:42 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-26 23:41:42 LOG5 finish_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2010-Aug-26 23:41:42 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-26 23:41:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-26 23:41:42 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-26 23:41:42 LOG5 end_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2010-Aug-26 23:41:42 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2010-Aug-26 23:41:42 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2010-Aug-26 23:41:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:41:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:41:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:41:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:41:43 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-26 23:41:43 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-26 23:41:43 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-26 23:41:43 LOG5 begin_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2010-Aug-26 23:41:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-26 23:41:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-26 23:41:43 INFO2 take_data: Starting WAPP 600-second scan: 23800116 2010-Aug-26 23:41:43 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-26 23:41:43 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2010-Aug-26 23:41:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-26 23:41:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:41:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-26 23:41:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13304.00 2010-Aug-26 23:41:43 NOTE WAPPDATA-new_file: New FITS file: wapp.20100826.a2010.0004.fits 2010-Aug-26 23:41:43 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100826.a2010.0004.fits} 2010-Aug-26 23:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:41:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:51:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:51:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-26 23:51:44 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2010-Aug-26 23:51:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-26 23:51:44 LOG5 end_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2010-Aug-26 23:51:44 LOG1 fixed_driftmap: New position: year = 2010.654330620833 RA = 21:45:20.0 RA/Dec = 21:45:51.5 +23:46:40.3 2010-Aug-26 23:51:44 NOTE fixed_driftmap: Correcting ZA to 5:25:26.5 ... 2010-Aug-26 23:51:44 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4240414794 -CF 2010-Aug-26 23:51:44 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-26 23:51:44 START begin_task: Starting task 'WAPP calibration' 2010-Aug-26 23:51:44 LOG5 begin_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2010-Aug-26 23:51:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-26 23:51:44 START begin_task: Starting task 'selecting calibration type' 2010-Aug-26 23:51:44 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Aug-26 23:51:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-26 23:51:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-26 23:51:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:51:44 START begin_task: Starting task 'waiting on setcal' 2010-Aug-26 23:51:44 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Aug-26 23:51:44 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4240414794 -CF 2010-Aug-26 23:51:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:51:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-26 23:51:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-26 23:51:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:51:44 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-26 23:51:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-26 23:51:44 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Aug-26 23:51:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-26 23:51:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-26 23:51:44 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-26 23:51:44 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-26 23:51:44 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2010-Aug-26 23:51:45 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-26 23:51:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-26 23:51:45 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2010-Aug-26 23:51:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-26 23:51:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-26 23:51:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-26 23:51:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-26 23:51:45 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-26 23:51:45 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2010-Aug-26 23:51:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-26 23:51:45 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-26 23:51:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-26 23:51:45 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2010-Aug-26 23:51:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-26 23:51:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-26 23:51:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-26 23:51:45 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Aug-26 23:51:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-26 23:51:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-26 23:51:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-26 23:51:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 23:51:45 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Aug-26 23:51:45 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 23:51:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-26 23:51:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 23:51:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 23:51:45 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Aug-26 23:51:45 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-26 23:51:45 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-26 23:51:45 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-Aug-26 23:51:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-26 23:51:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-26 23:51:45 INFO2 take_data: Starting WAPP 1-second scan: 23800117 2010-Aug-26 23:51:45 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-26 23:51:45 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2010-Aug-26 23:51:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:51:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-26 23:51:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13906.00 2010-Aug-26 23:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:51:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:51:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-26 23:51:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-26 23:51:47 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2010-Aug-26 23:51:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-26 23:51:47 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-Aug-26 23:51:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-26 23:51:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-26 23:51:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-26 23:51:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-26 23:51:47 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2010-Aug-26 23:51:47 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-26 23:51:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-26 23:51:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-26 23:51:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-26 23:51:47 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2010-Aug-26 23:51:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-26 23:51:47 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-26 23:51:47 LOG5 finish_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2010-Aug-26 23:51:47 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-26 23:51:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-26 23:51:47 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-26 23:51:47 LOG5 end_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2010-Aug-26 23:51:47 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2010-Aug-26 23:51:47 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2010-Aug-26 23:51:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:51:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:51:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:51:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-26 23:51:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-26 23:51:48 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-26 23:51:48 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-26 23:51:48 LOG5 begin_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2010-Aug-26 23:51:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-26 23:51:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-26 23:51:48 INFO2 take_data: Starting WAPP 600-second scan: 23800118 2010-Aug-26 23:51:48 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-26 23:51:48 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2010-Aug-26 23:51:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-26 23:51:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-26 23:51:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-26 23:51:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13909.00 2010-Aug-26 23:51:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20100826.a2010.0005.fits 2010-Aug-26 23:51:48 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100826.a2010.0005.fits} 2010-Aug-26 23:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-26 23:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-26 23:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-26 23:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-26 23:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-26 23:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-26 23:54:09 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 23:54:09.299 (seconds: 86049.299)!} 2010-Aug-26 23:54:09 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 23:54:09.299 (seconds: 86049.299)! 2010-Aug-26 23:54:10 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 86048.0 to 86049.0! 2010-Aug-26 23:54:11 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (86048.0 - 86050.0)! 2010-Aug-27 00:01:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 00:01:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 00:01:49 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2010-Aug-27 00:01:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 00:01:49 LOG5 end_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2010-Aug-27 00:01:49 LOG1 fixed_driftmap: New position: year = 2010.6543497921261 RA = 21:55:26.4 RA/Dec = 21:55:58.2 +23:46:45.2 2010-Aug-27 00:01:49 NOTE fixed_driftmap: Correcting ZA to 5:25:31.5 ... 2010-Aug-27 00:01:49 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4254147631 -CF 2010-Aug-27 00:01:49 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 00:01:49 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 00:01:49 LOG5 begin_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2010-Aug-27 00:01:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 00:01:49 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 00:01:49 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Aug-27 00:01:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 00:01:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 00:01:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 00:01:49 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 00:01:49 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-Aug-27 00:01:49 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4254147631 -CF 2010-Aug-27 00:01:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:01:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 00:01:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 00:01:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:01:49 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 00:01:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 00:01:49 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-Aug-27 00:01:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 00:01:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 00:01:49 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 00:01:49 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 00:01:49 LOG5 begin_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2010-Aug-27 00:01:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:01:50 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 00:01:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 00:01:50 LOG5 end_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2010-Aug-27 00:01:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 00:01:50 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 00:01:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 00:01:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 00:01:50 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 00:01:50 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2010-Aug-27 00:01:50 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 00:01:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 00:01:50 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2010-Aug-27 00:01:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 00:01:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 00:01:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 00:01:50 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Aug-27 00:01:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 00:01:50 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 00:01:50 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 00:01:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 00:01:50 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Aug-27 00:01:50 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 00:01:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 00:01:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 00:01:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 00:01:50 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Aug-27 00:01:50 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 00:01:50 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 00:01:50 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-Aug-27 00:01:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 00:01:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 00:01:50 INFO2 take_data: Starting WAPP 1-second scan: 23900001 2010-Aug-27 00:01:50 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 00:01:50 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2010-Aug-27 00:01:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 00:01:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 00:01:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14511.00 2010-Aug-27 00:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 00:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 00:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 00:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 00:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 00:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:01:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:01:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 00:01:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 00:01:52 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2010-Aug-27 00:01:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 00:01:52 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-Aug-27 00:01:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 00:01:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 00:01:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 00:01:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 00:01:52 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2010-Aug-27 00:01:52 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 00:01:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 00:01:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 00:01:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 00:01:52 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2010-Aug-27 00:01:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 00:01:52 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 00:01:52 LOG5 finish_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2010-Aug-27 00:01:52 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 00:01:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 00:01:52 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 00:01:52 LOG5 end_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2010-Aug-27 00:01:52 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2010-Aug-27 00:01:52 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2010-Aug-27 00:01:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:01:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:01:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:01:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:01:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 00:01:53 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 00:01:53 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 00:01:53 LOG5 begin_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2010-Aug-27 00:01:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 00:01:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 00:01:53 INFO2 take_data: Starting WAPP 600-second scan: 23900002 2010-Aug-27 00:01:53 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 00:01:53 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Aug-27 00:01:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 00:01:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 00:01:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 00:01:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14514.00 2010-Aug-27 00:01:53 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0000.fits 2010-Aug-27 00:01:53 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0000.fits} 2010-Aug-27 00:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 00:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 00:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 00:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 00:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 00:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:01:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:11:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 00:11:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 00:11:54 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Aug-27 00:11:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 00:11:54 LOG5 end_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2010-Aug-27 00:11:54 LOG1 fixed_driftmap: New position: year = 2010.6543689634191 RA = 22:05:32.8 RA/Dec = 22:06:04.9 +23:46:49.8 2010-Aug-27 00:11:54 NOTE fixed_driftmap: Correcting ZA to 5:25:36.1 ... 2010-Aug-27 00:11:54 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4266861894 -CF 2010-Aug-27 00:11:54 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 00:11:54 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 00:11:54 LOG5 begin_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2010-Aug-27 00:11:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 00:11:54 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 00:11:54 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Aug-27 00:11:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 00:11:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 00:11:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 00:11:54 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 00:11:54 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2010-Aug-27 00:11:54 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4266861894 -CF 2010-Aug-27 00:11:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:11:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 00:11:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 00:11:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:11:54 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 00:11:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 00:11:54 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2010-Aug-27 00:11:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 00:11:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 00:11:54 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 00:11:54 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 00:11:54 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2010-Aug-27 00:11:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:11:55 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 00:11:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 00:11:55 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2010-Aug-27 00:11:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 00:11:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 00:11:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 00:11:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 00:11:55 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 00:11:55 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2010-Aug-27 00:11:55 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 00:11:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 00:11:55 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2010-Aug-27 00:11:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 00:11:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 00:11:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 00:11:55 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Aug-27 00:11:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 00:11:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 00:11:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 00:11:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 00:11:55 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2010-Aug-27 00:11:55 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 00:11:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 00:11:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 00:11:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 00:11:55 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2010-Aug-27 00:11:55 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 00:11:55 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 00:11:55 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2010-Aug-27 00:11:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 00:11:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 00:11:55 INFO2 take_data: Starting WAPP 1-second scan: 23900003 2010-Aug-27 00:11:56 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 00:11:56 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2010-Aug-27 00:11:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 00:11:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 00:11:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15117.00 2010-Aug-27 00:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 00:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 00:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 00:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 00:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 00:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:11:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 00:11:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 00:11:58 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2010-Aug-27 00:11:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 00:11:58 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2010-Aug-27 00:11:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 00:11:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 00:11:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 00:11:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 00:11:58 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2010-Aug-27 00:11:58 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 00:11:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 00:11:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 00:11:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 00:11:58 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2010-Aug-27 00:11:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 00:11:58 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 00:11:58 LOG5 finish_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2010-Aug-27 00:11:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 00:11:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 00:11:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 00:11:58 LOG5 end_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2010-Aug-27 00:11:58 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2010-Aug-27 00:11:59 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2010-Aug-27 00:11:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:11:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:11:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:11:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:11:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 00:11:59 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 00:11:59 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 00:11:59 LOG5 begin_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2010-Aug-27 00:11:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 00:11:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 00:11:59 INFO2 take_data: Starting WAPP 600-second scan: 23900004 2010-Aug-27 00:11:59 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 00:11:59 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2010-Aug-27 00:11:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 00:11:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 00:11:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 00:11:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15120.00 2010-Aug-27 00:11:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0001.fits 2010-Aug-27 00:11:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0001.fits} 2010-Aug-27 00:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 00:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 00:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 00:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 00:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 00:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:22:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 00:22:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 00:22:00 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2010-Aug-27 00:22:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 00:22:00 LOG5 end_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2010-Aug-27 00:22:00 LOG1 fixed_driftmap: New position: year = 2010.6543881664004 RA = 22:15:40.2 RA/Dec = 22:16:12.5 +23:46:54.0 2010-Aug-27 00:22:00 NOTE fixed_driftmap: Correcting ZA to 5:25:40.3 ... 2010-Aug-27 00:22:00 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4278551239 -CF 2010-Aug-27 00:22:00 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 00:22:00 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 00:22:00 LOG5 begin_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2010-Aug-27 00:22:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 00:22:00 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 00:22:00 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Aug-27 00:22:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 00:22:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 00:22:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 00:22:00 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 00:22:00 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2010-Aug-27 00:22:00 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4278551239 -CF 2010-Aug-27 00:22:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:22:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 00:22:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 00:22:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:22:00 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 00:22:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 00:22:00 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2010-Aug-27 00:22:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 00:22:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 00:22:00 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 00:22:00 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 00:22:00 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2010-Aug-27 00:22:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:22:01 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 00:22:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 00:22:01 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2010-Aug-27 00:22:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 00:22:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 00:22:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 00:22:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 00:22:01 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 00:22:01 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2010-Aug-27 00:22:01 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 00:22:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 00:22:01 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2010-Aug-27 00:22:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 00:22:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 00:22:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 00:22:01 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Aug-27 00:22:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 00:22:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 00:22:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 00:22:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 00:22:01 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Aug-27 00:22:01 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 00:22:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 00:22:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 00:22:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 00:22:01 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Aug-27 00:22:01 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 00:22:01 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 00:22:01 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2010-Aug-27 00:22:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 00:22:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 00:22:01 INFO2 take_data: Starting WAPP 1-second scan: 23900005 2010-Aug-27 00:22:01 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 00:22:01 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2010-Aug-27 00:22:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 00:22:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 00:22:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15722.00 2010-Aug-27 00:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 00:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 00:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 00:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 00:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 00:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:22:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 00:22:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 00:22:03 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2010-Aug-27 00:22:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 00:22:03 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2010-Aug-27 00:22:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 00:22:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 00:22:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 00:22:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 00:22:03 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2010-Aug-27 00:22:03 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 00:22:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 00:22:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 00:22:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 00:22:03 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2010-Aug-27 00:22:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 00:22:03 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 00:22:03 LOG5 finish_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2010-Aug-27 00:22:03 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 00:22:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 00:22:03 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 00:22:03 LOG5 end_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2010-Aug-27 00:22:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2010-Aug-27 00:22:04 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2010-Aug-27 00:22:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:22:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:22:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:22:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:22:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 00:22:04 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 00:22:04 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 00:22:04 LOG5 begin_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2010-Aug-27 00:22:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 00:22:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 00:22:04 INFO2 take_data: Starting WAPP 600-second scan: 23900006 2010-Aug-27 00:22:04 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 00:22:04 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2010-Aug-27 00:22:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 00:22:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 00:22:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 00:22:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15725.00 2010-Aug-27 00:22:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0002.fits 2010-Aug-27 00:22:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0002.fits} 2010-Aug-27 00:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 00:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 00:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 00:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 00:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 00:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:32:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 00:32:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 00:32:05 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2010-Aug-27 00:32:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 00:32:05 LOG5 end_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2010-Aug-27 00:32:05 LOG1 fixed_driftmap: New position: year = 2010.6544073376936 RA = 22:25:46.6 RA/Dec = 22:26:19.2 +23:46:57.8 2010-Aug-27 00:32:05 NOTE fixed_driftmap: Correcting ZA to 5:25:44.1 ... 2010-Aug-27 00:32:05 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4289154414 -CF 2010-Aug-27 00:32:05 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 00:32:05 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 00:32:05 LOG5 begin_task: Level: (2) ID = <10216> Status = 0 0 0 0 ok 2010-Aug-27 00:32:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 00:32:05 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 00:32:05 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-Aug-27 00:32:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 00:32:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 00:32:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 00:32:05 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 00:32:05 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2010-Aug-27 00:32:05 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4289154414 -CF 2010-Aug-27 00:32:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:32:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 00:32:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 00:32:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:32:05 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 00:32:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 00:32:05 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2010-Aug-27 00:32:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 00:32:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 00:32:06 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 00:32:06 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 00:32:06 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2010-Aug-27 00:32:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:32:06 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 00:32:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 00:32:06 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2010-Aug-27 00:32:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 00:32:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 00:32:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 00:32:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 00:32:06 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 00:32:06 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2010-Aug-27 00:32:06 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 00:32:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 00:32:06 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2010-Aug-27 00:32:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 00:32:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 00:32:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 00:32:06 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-Aug-27 00:32:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 00:32:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 00:32:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 00:32:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 00:32:06 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Aug-27 00:32:06 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 00:32:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 00:32:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 00:32:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 00:32:06 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Aug-27 00:32:06 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 00:32:06 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 00:32:06 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2010-Aug-27 00:32:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 00:32:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 00:32:06 INFO2 take_data: Starting WAPP 1-second scan: 23900007 2010-Aug-27 00:32:06 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 00:32:06 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2010-Aug-27 00:32:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 00:32:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 00:32:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16327.00 2010-Aug-27 00:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 00:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 00:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 00:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 00:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 00:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:32:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 00:32:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 00:32:08 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2010-Aug-27 00:32:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 00:32:08 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2010-Aug-27 00:32:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 00:32:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 00:32:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 00:32:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 00:32:08 LOG5 begin_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2010-Aug-27 00:32:08 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 00:32:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 00:32:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 00:32:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 00:32:08 LOG5 end_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2010-Aug-27 00:32:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 00:32:08 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 00:32:08 LOG5 finish_task: Level: (2) ID = <10216> Status = 0 0 0 0 ok 2010-Aug-27 00:32:08 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 00:32:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 00:32:08 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 00:32:08 LOG5 end_task: Level: (2) ID = <10216> Status = 0 0 0 0 ok 2010-Aug-27 00:32:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2010-Aug-27 00:32:08 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2010-Aug-27 00:32:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:32:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:32:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:32:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:32:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 00:32:09 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 00:32:09 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 00:32:09 LOG5 begin_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2010-Aug-27 00:32:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 00:32:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 00:32:09 INFO2 take_data: Starting WAPP 600-second scan: 23900008 2010-Aug-27 00:32:09 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 00:32:09 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2010-Aug-27 00:32:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 00:32:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 00:32:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 00:32:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16330.00 2010-Aug-27 00:32:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0003.fits 2010-Aug-27 00:32:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0003.fits} 2010-Aug-27 00:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 00:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 00:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 00:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 00:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 00:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:42:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 00:42:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 00:42:10 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2010-Aug-27 00:42:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 00:42:10 LOG5 end_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2010-Aug-27 00:42:10 LOG1 fixed_driftmap: New position: year = 2010.6544265089867 RA = 22:35:53.0 RA/Dec = 22:36:25.8 +23:47:01.2 2010-Aug-27 00:42:10 NOTE fixed_driftmap: Correcting ZA to 5:25:47.5 ... 2010-Aug-27 00:42:10 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4298670927 -CF 2010-Aug-27 00:42:10 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 00:42:10 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 00:42:10 LOG5 begin_task: Level: (2) ID = <10227> Status = 0 0 0 0 ok 2010-Aug-27 00:42:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 00:42:10 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 00:42:10 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Aug-27 00:42:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 00:42:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 00:42:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 00:42:10 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 00:42:10 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2010-Aug-27 00:42:10 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4298670927 -CF 2010-Aug-27 00:42:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:42:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 00:42:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 00:42:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:42:10 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 00:42:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 00:42:10 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2010-Aug-27 00:42:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 00:42:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 00:42:11 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 00:42:11 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 00:42:11 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2010-Aug-27 00:42:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:42:12 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 00:42:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 00:42:12 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2010-Aug-27 00:42:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 00:42:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 00:42:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 00:42:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 00:42:12 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 00:42:12 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2010-Aug-27 00:42:12 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 00:42:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 00:42:12 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2010-Aug-27 00:42:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 00:42:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 00:42:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 00:42:12 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Aug-27 00:42:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 00:42:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 00:42:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 00:42:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 00:42:12 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Aug-27 00:42:12 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 00:42:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 00:42:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 00:42:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 00:42:12 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Aug-27 00:42:12 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 00:42:12 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 00:42:12 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2010-Aug-27 00:42:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 00:42:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 00:42:12 INFO2 take_data: Starting WAPP 1-second scan: 23900009 2010-Aug-27 00:42:12 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 00:42:12 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2010-Aug-27 00:42:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 00:42:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 00:42:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16933.00 2010-Aug-27 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:42:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:42:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 00:42:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 00:42:14 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2010-Aug-27 00:42:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 00:42:14 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2010-Aug-27 00:42:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 00:42:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 00:42:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 00:42:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 00:42:14 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2010-Aug-27 00:42:14 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 00:42:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 00:42:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 00:42:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 00:42:14 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2010-Aug-27 00:42:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 00:42:14 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 00:42:14 LOG5 finish_task: Level: (2) ID = <10227> Status = 0 0 0 0 ok 2010-Aug-27 00:42:14 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 00:42:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 00:42:14 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 00:42:14 LOG5 end_task: Level: (2) ID = <10227> Status = 0 0 0 0 ok 2010-Aug-27 00:42:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2010-Aug-27 00:42:14 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2010-Aug-27 00:42:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:42:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:42:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:42:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:42:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 00:42:15 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 00:42:15 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 00:42:15 LOG5 begin_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2010-Aug-27 00:42:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 00:42:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 00:42:15 INFO2 take_data: Starting WAPP 600-second scan: 23900010 2010-Aug-27 00:42:15 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 00:42:15 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2010-Aug-27 00:42:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 00:42:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 00:42:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 00:42:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16936.00 2010-Aug-27 00:42:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0004.fits 2010-Aug-27 00:42:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0004.fits} 2010-Aug-27 00:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 00:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 00:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 00:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 00:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 00:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:52:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 00:52:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 00:52:16 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2010-Aug-27 00:52:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 00:52:16 LOG5 end_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2010-Aug-27 00:52:16 LOG1 fixed_driftmap: New position: year = 2010.6544457119678 RA = 22:46:00.4 RA/Dec = 22:46:33.5 +23:47:04.3 2010-Aug-27 00:52:16 NOTE fixed_driftmap: Correcting ZA to 5:25:50.6 ... 2010-Aug-27 00:52:16 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4307095325 -CF 2010-Aug-27 00:52:16 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 00:52:16 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 00:52:16 LOG5 begin_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2010-Aug-27 00:52:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 00:52:16 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 00:52:16 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Aug-27 00:52:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 00:52:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 00:52:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 00:52:16 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 00:52:16 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2010-Aug-27 00:52:16 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4307095325 -CF 2010-Aug-27 00:52:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:52:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 00:52:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 00:52:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:52:16 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 00:52:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 00:52:16 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2010-Aug-27 00:52:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 00:52:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 00:52:16 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 00:52:16 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 00:52:16 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2010-Aug-27 00:52:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 00:52:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 00:52:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 00:52:17 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2010-Aug-27 00:52:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 00:52:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 00:52:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 00:52:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 00:52:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 00:52:17 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2010-Aug-27 00:52:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 00:52:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 00:52:17 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2010-Aug-27 00:52:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 00:52:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 00:52:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 00:52:17 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Aug-27 00:52:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 00:52:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 00:52:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 00:52:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 00:52:17 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2010-Aug-27 00:52:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 00:52:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 00:52:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 00:52:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 00:52:17 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2010-Aug-27 00:52:17 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 00:52:17 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 00:52:17 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2010-Aug-27 00:52:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 00:52:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 00:52:17 INFO2 take_data: Starting WAPP 1-second scan: 23900011 2010-Aug-27 00:52:17 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 00:52:17 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2010-Aug-27 00:52:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 00:52:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 00:52:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17538.00 2010-Aug-27 00:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 00:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 00:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 00:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 00:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 00:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:52:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:52:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 00:52:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 00:52:19 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2010-Aug-27 00:52:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 00:52:19 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2010-Aug-27 00:52:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 00:52:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 00:52:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 00:52:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 00:52:19 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2010-Aug-27 00:52:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 00:52:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 00:52:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 00:52:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 00:52:19 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2010-Aug-27 00:52:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 00:52:19 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 00:52:19 LOG5 finish_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2010-Aug-27 00:52:19 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 00:52:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 00:52:19 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 00:52:19 LOG5 end_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2010-Aug-27 00:52:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2010-Aug-27 00:52:19 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2010-Aug-27 00:52:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:52:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:52:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:52:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 00:52:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 00:52:20 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 00:52:20 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 00:52:20 LOG5 begin_task: Level: (2) ID = <10247> Status = 0 0 0 0 ok 2010-Aug-27 00:52:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 00:52:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 00:52:20 INFO2 take_data: Starting WAPP 600-second scan: 23900012 2010-Aug-27 00:52:20 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 00:52:20 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2010-Aug-27 00:52:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 00:52:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 00:52:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 00:52:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17541.00 2010-Aug-27 00:52:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0005.fits 2010-Aug-27 00:52:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0005.fits} 2010-Aug-27 00:52:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 00:52:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 00:52:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 00:52:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 00:52:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 00:52:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:52:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:52:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 00:52:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:02:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 01:02:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 01:02:21 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2010-Aug-27 01:02:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 01:02:21 LOG5 end_task: Level: (2) ID = <10247> Status = 0 0 0 0 ok 2010-Aug-27 01:02:21 LOG1 fixed_driftmap: New position: year = 2010.654464883261 RA = 22:56:06.8 RA/Dec = 22:56:40.2 +23:47:06.9 2010-Aug-27 01:02:21 NOTE fixed_driftmap: Correcting ZA to 5:25:53.2 ... 2010-Aug-27 01:02:21 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4314383313 -CF 2010-Aug-27 01:02:21 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 01:02:21 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 01:02:21 LOG5 begin_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2010-Aug-27 01:02:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 01:02:21 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 01:02:21 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2010-Aug-27 01:02:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 01:02:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 01:02:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 01:02:21 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 01:02:21 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2010-Aug-27 01:02:21 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4314383313 -CF 2010-Aug-27 01:02:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:02:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 01:02:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 01:02:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:02:21 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 01:02:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 01:02:21 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2010-Aug-27 01:02:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 01:02:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 01:02:21 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 01:02:21 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 01:02:21 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2010-Aug-27 01:02:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:02:22 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 01:02:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 01:02:22 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2010-Aug-27 01:02:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 01:02:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 01:02:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 01:02:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 01:02:22 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 01:02:22 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2010-Aug-27 01:02:22 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 01:02:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 01:02:22 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2010-Aug-27 01:02:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 01:02:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 01:02:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 01:02:22 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2010-Aug-27 01:02:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 01:02:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 01:02:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 01:02:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 01:02:22 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2010-Aug-27 01:02:22 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 01:02:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 01:02:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 01:02:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 01:02:22 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2010-Aug-27 01:02:22 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 01:02:22 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 01:02:22 LOG5 begin_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2010-Aug-27 01:02:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 01:02:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 01:02:22 INFO2 take_data: Starting WAPP 1-second scan: 23900013 2010-Aug-27 01:02:22 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 01:02:22 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2010-Aug-27 01:02:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 01:02:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 01:02:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18143.00 2010-Aug-27 01:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 01:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 01:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 01:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 01:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 01:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:02:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 01:02:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 01:02:24 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2010-Aug-27 01:02:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 01:02:24 LOG5 end_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2010-Aug-27 01:02:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 01:02:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 01:02:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 01:02:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 01:02:24 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2010-Aug-27 01:02:24 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 01:02:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 01:02:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 01:02:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 01:02:24 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2010-Aug-27 01:02:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 01:02:24 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 01:02:24 LOG5 finish_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2010-Aug-27 01:02:24 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 01:02:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 01:02:24 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 01:02:24 LOG5 end_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2010-Aug-27 01:02:24 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2010-Aug-27 01:02:24 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2010-Aug-27 01:02:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:02:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:02:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:02:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:02:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 01:02:25 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 01:02:25 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 01:02:25 LOG5 begin_task: Level: (2) ID = <10258> Status = 0 0 0 0 ok 2010-Aug-27 01:02:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 01:02:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 01:02:25 INFO2 take_data: Starting WAPP 600-second scan: 23900014 2010-Aug-27 01:02:25 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 01:02:25 LOG5 begin_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2010-Aug-27 01:02:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 01:02:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 01:02:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 01:02:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18146.00 2010-Aug-27 01:02:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0006.fits 2010-Aug-27 01:02:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0006.fits} 2010-Aug-27 01:02:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 01:02:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 01:02:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 01:02:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 01:02:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 01:02:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:02:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:02:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:02:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:12:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 01:12:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 01:12:26 LOG5 end_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2010-Aug-27 01:12:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 01:12:26 LOG5 end_task: Level: (2) ID = <10258> Status = 0 0 0 0 ok 2010-Aug-27 01:12:26 LOG1 fixed_driftmap: New position: year = 2010.6544840545541 RA = 23:06:13.2 RA/Dec = 23:06:46.8 +23:47:09.1 2010-Aug-27 01:12:26 NOTE fixed_driftmap: Correcting ZA to 5:25:55.4 ... 2010-Aug-27 01:12:26 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4320535609 -CF 2010-Aug-27 01:12:26 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 01:12:26 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 01:12:26 LOG5 begin_task: Level: (2) ID = <10260> Status = 0 0 0 0 ok 2010-Aug-27 01:12:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 01:12:26 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 01:12:26 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2010-Aug-27 01:12:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 01:12:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 01:12:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 01:12:26 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 01:12:26 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2010-Aug-27 01:12:26 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4320535609 -CF 2010-Aug-27 01:12:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:12:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 01:12:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 01:12:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:12:26 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 01:12:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 01:12:26 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2010-Aug-27 01:12:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 01:12:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 01:12:27 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 01:12:27 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 01:12:27 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2010-Aug-27 01:12:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:12:27 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 01:12:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 01:12:27 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2010-Aug-27 01:12:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 01:12:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 01:12:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 01:12:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 01:12:27 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 01:12:27 LOG5 begin_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2010-Aug-27 01:12:27 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 01:12:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 01:12:27 LOG5 end_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2010-Aug-27 01:12:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 01:12:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 01:12:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 01:12:27 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2010-Aug-27 01:12:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 01:12:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 01:12:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 01:12:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 01:12:27 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2010-Aug-27 01:12:27 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 01:12:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 01:12:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 01:12:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 01:12:27 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2010-Aug-27 01:12:27 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 01:12:27 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 01:12:27 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2010-Aug-27 01:12:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 01:12:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 01:12:27 INFO2 take_data: Starting WAPP 1-second scan: 23900015 2010-Aug-27 01:12:27 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 01:12:27 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2010-Aug-27 01:12:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 01:12:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 01:12:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18748.00 2010-Aug-27 01:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 01:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 01:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 01:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 01:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 01:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:12:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 01:12:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 01:12:29 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2010-Aug-27 01:12:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 01:12:29 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2010-Aug-27 01:12:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 01:12:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 01:12:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 01:12:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 01:12:29 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2010-Aug-27 01:12:29 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 01:12:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 01:12:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 01:12:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 01:12:29 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2010-Aug-27 01:12:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 01:12:29 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 01:12:29 LOG5 finish_task: Level: (2) ID = <10260> Status = 0 0 0 0 ok 2010-Aug-27 01:12:29 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 01:12:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 01:12:29 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 01:12:29 LOG5 end_task: Level: (2) ID = <10260> Status = 0 0 0 0 ok 2010-Aug-27 01:12:29 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2010-Aug-27 01:12:29 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2010-Aug-27 01:12:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:12:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:12:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:12:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:12:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 01:12:30 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 01:12:30 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 01:12:30 LOG5 begin_task: Level: (2) ID = <10269> Status = 0 0 0 0 ok 2010-Aug-27 01:12:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 01:12:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 01:12:30 INFO2 take_data: Starting WAPP 600-second scan: 23900016 2010-Aug-27 01:12:30 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 01:12:30 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2010-Aug-27 01:12:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 01:12:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 01:12:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 01:12:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18751.00 2010-Aug-27 01:12:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0007.fits 2010-Aug-27 01:12:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0007.fits} 2010-Aug-27 01:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 01:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 01:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 01:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 01:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 01:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:12:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:22:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 01:22:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 01:22:31 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2010-Aug-27 01:22:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 01:22:31 LOG5 end_task: Level: (2) ID = <10269> Status = 0 0 0 0 ok 2010-Aug-27 01:22:31 LOG1 fixed_driftmap: New position: year = 2010.6545032258473 RA = 23:16:19.6 RA/Dec = 23:16:53.5 +23:47:10.9 2010-Aug-27 01:22:31 NOTE fixed_driftmap: Correcting ZA to 5:25:57.2 ... 2010-Aug-27 01:22:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4325540240 -CF 2010-Aug-27 01:22:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 01:22:31 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 01:22:31 LOG5 begin_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2010-Aug-27 01:22:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 01:22:31 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 01:22:31 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2010-Aug-27 01:22:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 01:22:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 01:22:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 01:22:31 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 01:22:31 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2010-Aug-27 01:22:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4325540240 -CF 2010-Aug-27 01:22:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:22:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 01:22:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 01:22:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:22:31 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 01:22:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 01:22:31 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2010-Aug-27 01:22:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 01:22:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 01:22:31 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 01:22:31 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 01:22:31 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2010-Aug-27 01:22:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:22:32 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 01:22:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 01:22:32 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2010-Aug-27 01:22:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 01:22:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 01:22:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 01:22:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 01:22:32 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 01:22:32 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2010-Aug-27 01:22:32 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 01:22:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 01:22:32 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2010-Aug-27 01:22:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 01:22:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 01:22:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 01:22:32 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2010-Aug-27 01:22:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 01:22:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 01:22:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 01:22:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 01:22:32 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2010-Aug-27 01:22:32 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 01:22:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 01:22:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 01:22:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 01:22:32 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2010-Aug-27 01:22:32 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 01:22:32 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 01:22:32 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2010-Aug-27 01:22:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 01:22:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 01:22:32 INFO2 take_data: Starting WAPP 1-second scan: 23900017 2010-Aug-27 01:22:32 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 01:22:32 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2010-Aug-27 01:22:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 01:22:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 01:22:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19353.00 2010-Aug-27 01:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 01:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 01:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 01:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 01:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 01:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:22:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:22:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 01:22:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 01:22:34 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2010-Aug-27 01:22:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 01:22:34 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2010-Aug-27 01:22:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 01:22:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 01:22:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 01:22:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 01:22:34 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2010-Aug-27 01:22:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 01:22:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 01:22:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 01:22:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 01:22:34 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2010-Aug-27 01:22:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 01:22:34 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 01:22:34 LOG5 finish_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2010-Aug-27 01:22:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 01:22:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 01:22:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 01:22:34 LOG5 end_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2010-Aug-27 01:22:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2010-Aug-27 01:22:34 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2010-Aug-27 01:22:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:22:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:22:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:22:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:22:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 01:22:35 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 01:22:35 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 01:22:35 LOG5 begin_task: Level: (2) ID = <10280> Status = 0 0 0 0 ok 2010-Aug-27 01:22:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 01:22:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 01:22:35 INFO2 take_data: Starting WAPP 600-second scan: 23900018 2010-Aug-27 01:22:35 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 01:22:35 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2010-Aug-27 01:22:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 01:22:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 01:22:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 01:22:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19356.00 2010-Aug-27 01:22:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0008.fits 2010-Aug-27 01:22:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0008.fits} 2010-Aug-27 01:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 01:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 01:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 01:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 01:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 01:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:28:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.709 < 0.75)! 2010-Aug-27 01:28:54 LOG4 check_wapp_levels: WAPP-1 power levels: 0.709 0.749 0.749 0.790 2010-Aug-27 01:28:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.803 0.726 0.853 0.791 2010-Aug-27 01:28:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.894 1.108 1.129 2010-Aug-27 01:28:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.872 1.007 1.027 2010-Aug-27 01:28:56 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.872 and 1.130 2010-Aug-27 01:32:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 01:32:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 01:32:36 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2010-Aug-27 01:32:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 01:32:36 LOG5 end_task: Level: (2) ID = <10280> Status = 0 0 0 0 ok 2010-Aug-27 01:32:36 LOG1 fixed_driftmap: New position: year = 2010.6545223971405 RA = 23:26:26.0 RA/Dec = 23:27:00.1 +23:47:12.3 2010-Aug-27 01:32:36 NOTE fixed_driftmap: Correcting ZA to 5:25:58.6 ... 2010-Aug-27 01:32:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4329387465 -CF 2010-Aug-27 01:32:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 01:32:36 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 01:32:36 LOG5 begin_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2010-Aug-27 01:32:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 01:32:36 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 01:32:36 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Aug-27 01:32:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 01:32:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 01:32:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 01:32:36 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 01:32:36 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2010-Aug-27 01:32:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4329387465 -CF 2010-Aug-27 01:32:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:32:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 01:32:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 01:32:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:32:36 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 01:32:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 01:32:36 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2010-Aug-27 01:32:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 01:32:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 01:32:36 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 01:32:36 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 01:32:36 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2010-Aug-27 01:32:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:32:37 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 01:32:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 01:32:37 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2010-Aug-27 01:32:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 01:32:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 01:32:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 01:32:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 01:32:37 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 01:32:37 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2010-Aug-27 01:32:37 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 01:32:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 01:32:37 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2010-Aug-27 01:32:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 01:32:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 01:32:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 01:32:37 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Aug-27 01:32:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 01:32:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 01:32:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 01:32:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 01:32:37 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2010-Aug-27 01:32:37 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 01:32:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 01:32:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 01:32:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 01:32:37 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2010-Aug-27 01:32:37 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 01:32:37 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 01:32:37 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2010-Aug-27 01:32:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 01:32:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 01:32:37 INFO2 take_data: Starting WAPP 1-second scan: 23900019 2010-Aug-27 01:32:37 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 01:32:37 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2010-Aug-27 01:32:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 01:32:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 01:32:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19958.00 2010-Aug-27 01:32:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 01:32:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 01:32:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 01:32:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 01:32:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 01:32:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:32:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:32:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:32:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:32:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 01:32:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 01:32:39 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2010-Aug-27 01:32:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 01:32:39 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2010-Aug-27 01:32:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 01:32:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 01:32:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 01:32:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 01:32:39 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2010-Aug-27 01:32:39 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 01:32:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 01:32:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 01:32:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 01:32:39 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2010-Aug-27 01:32:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 01:32:39 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 01:32:39 LOG5 finish_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2010-Aug-27 01:32:39 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 01:32:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 01:32:39 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 01:32:39 LOG5 end_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2010-Aug-27 01:32:39 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2010-Aug-27 01:32:39 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2010-Aug-27 01:32:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:32:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:32:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:32:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:32:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 01:32:40 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 01:32:40 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 01:32:40 LOG5 begin_task: Level: (2) ID = <10291> Status = 0 0 0 0 ok 2010-Aug-27 01:32:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 01:32:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 01:32:40 INFO2 take_data: Starting WAPP 600-second scan: 23900020 2010-Aug-27 01:32:40 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 01:32:40 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2010-Aug-27 01:32:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 01:32:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 01:32:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 01:32:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19961.00 2010-Aug-27 01:32:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0009.fits 2010-Aug-27 01:32:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0009.fits} 2010-Aug-27 01:32:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 01:32:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 01:32:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 01:32:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 01:32:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 01:32:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:32:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:32:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:32:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:42:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 01:42:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 01:42:41 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2010-Aug-27 01:42:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 01:42:41 LOG5 end_task: Level: (2) ID = <10291> Status = 0 0 0 0 ok 2010-Aug-27 01:42:41 LOG1 fixed_driftmap: New position: year = 2010.6545415684334 RA = 23:36:32.4 RA/Dec = 23:37:06.8 +23:47:13.2 2010-Aug-27 01:42:41 NOTE fixed_driftmap: Correcting ZA to 5:25:59.5 ... 2010-Aug-27 01:42:41 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4332069797 -CF 2010-Aug-27 01:42:41 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 01:42:41 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 01:42:41 LOG5 begin_task: Level: (2) ID = <10293> Status = 0 0 0 0 ok 2010-Aug-27 01:42:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 01:42:41 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 01:42:41 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Aug-27 01:42:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 01:42:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 01:42:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 01:42:41 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 01:42:41 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2010-Aug-27 01:42:41 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4332069797 -CF 2010-Aug-27 01:42:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:42:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 01:42:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 01:42:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:42:41 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 01:42:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 01:42:41 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2010-Aug-27 01:42:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 01:42:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 01:42:41 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 01:42:41 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 01:42:41 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2010-Aug-27 01:42:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:42:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 01:42:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 01:42:42 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2010-Aug-27 01:42:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 01:42:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 01:42:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 01:42:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 01:42:42 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 01:42:42 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2010-Aug-27 01:42:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 01:42:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 01:42:42 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2010-Aug-27 01:42:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 01:42:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 01:42:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 01:42:42 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Aug-27 01:42:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 01:42:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 01:42:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 01:42:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 01:42:42 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2010-Aug-27 01:42:42 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 01:42:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 01:42:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 01:42:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 01:42:42 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2010-Aug-27 01:42:42 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 01:42:42 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 01:42:42 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2010-Aug-27 01:42:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 01:42:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 01:42:42 INFO2 take_data: Starting WAPP 1-second scan: 23900021 2010-Aug-27 01:42:42 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 01:42:42 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2010-Aug-27 01:42:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 01:42:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 01:42:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20563.00 2010-Aug-27 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:42:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:42:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 01:42:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 01:42:44 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2010-Aug-27 01:42:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 01:42:44 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2010-Aug-27 01:42:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 01:42:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 01:42:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 01:42:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 01:42:44 LOG5 begin_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2010-Aug-27 01:42:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 01:42:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 01:42:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 01:42:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 01:42:44 LOG5 end_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2010-Aug-27 01:42:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 01:42:44 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 01:42:44 LOG5 finish_task: Level: (2) ID = <10293> Status = 0 0 0 0 ok 2010-Aug-27 01:42:44 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 01:42:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 01:42:44 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 01:42:44 LOG5 end_task: Level: (2) ID = <10293> Status = 0 0 0 0 ok 2010-Aug-27 01:42:44 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2010-Aug-27 01:42:45 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2010-Aug-27 01:42:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:42:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:42:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:42:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:42:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 01:42:45 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 01:42:45 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 01:42:45 LOG5 begin_task: Level: (2) ID = <10302> Status = 0 0 0 0 ok 2010-Aug-27 01:42:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 01:42:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 01:42:45 INFO2 take_data: Starting WAPP 600-second scan: 23900022 2010-Aug-27 01:42:45 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 01:42:45 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2010-Aug-27 01:42:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 01:42:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 01:42:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 01:42:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20566.00 2010-Aug-27 01:42:45 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0010.fits 2010-Aug-27 01:42:45 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0010.fits} 2010-Aug-27 01:42:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 01:42:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 01:42:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 01:42:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 01:42:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 01:42:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:42:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:42:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:42:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:52:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 01:52:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 01:52:46 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2010-Aug-27 01:52:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 01:52:46 LOG5 end_task: Level: (2) ID = <10302> Status = 0 0 0 0 ok 2010-Aug-27 01:52:46 LOG1 fixed_driftmap: New position: year = 2010.6545607397265 RA = 23:46:38.8 RA/Dec = 23:47:13.5 +23:47:13.8 2010-Aug-27 01:52:46 NOTE fixed_driftmap: Correcting ZA to 5:26:00.1 ... 2010-Aug-27 01:52:46 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4333582023 -CF 2010-Aug-27 01:52:46 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 01:52:46 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 01:52:46 LOG5 begin_task: Level: (2) ID = <10304> Status = 0 0 0 0 ok 2010-Aug-27 01:52:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 01:52:46 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 01:52:46 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2010-Aug-27 01:52:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 01:52:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 01:52:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 01:52:46 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 01:52:46 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2010-Aug-27 01:52:46 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4333582023 -CF 2010-Aug-27 01:52:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:52:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 01:52:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 01:52:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:52:46 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 01:52:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 01:52:46 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2010-Aug-27 01:52:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 01:52:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 01:52:46 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 01:52:46 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 01:52:46 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2010-Aug-27 01:52:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 01:52:47 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 01:52:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 01:52:47 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2010-Aug-27 01:52:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 01:52:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 01:52:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 01:52:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 01:52:47 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 01:52:47 LOG5 begin_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2010-Aug-27 01:52:47 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 01:52:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 01:52:47 LOG5 end_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2010-Aug-27 01:52:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 01:52:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 01:52:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 01:52:47 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2010-Aug-27 01:52:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 01:52:47 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 01:52:47 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 01:52:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 01:52:47 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2010-Aug-27 01:52:48 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 01:52:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 01:52:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 01:52:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 01:52:48 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2010-Aug-27 01:52:48 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 01:52:48 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 01:52:48 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2010-Aug-27 01:52:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 01:52:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 01:52:48 INFO2 take_data: Starting WAPP 1-second scan: 23900023 2010-Aug-27 01:52:48 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 01:52:48 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2010-Aug-27 01:52:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 01:52:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 01:52:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21169.00 2010-Aug-27 01:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 01:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 01:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 01:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 01:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 01:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:52:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 01:52:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 01:52:50 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2010-Aug-27 01:52:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 01:52:50 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2010-Aug-27 01:52:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 01:52:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 01:52:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 01:52:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 01:52:50 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2010-Aug-27 01:52:50 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 01:52:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 01:52:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 01:52:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 01:52:50 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2010-Aug-27 01:52:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 01:52:50 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 01:52:50 LOG5 finish_task: Level: (2) ID = <10304> Status = 0 0 0 0 ok 2010-Aug-27 01:52:50 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 01:52:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 01:52:50 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 01:52:50 LOG5 end_task: Level: (2) ID = <10304> Status = 0 0 0 0 ok 2010-Aug-27 01:52:50 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2010-Aug-27 01:52:50 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2010-Aug-27 01:52:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:52:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:52:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:52:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 01:52:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 01:52:51 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 01:52:51 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 01:52:51 LOG5 begin_task: Level: (2) ID = <10313> Status = 0 0 0 0 ok 2010-Aug-27 01:52:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 01:52:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 01:52:51 INFO2 take_data: Starting WAPP 600-second scan: 23900024 2010-Aug-27 01:52:51 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 01:52:51 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2010-Aug-27 01:52:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 01:52:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 01:52:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 01:52:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21172.00 2010-Aug-27 01:52:51 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0011.fits 2010-Aug-27 01:52:51 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0011.fits} 2010-Aug-27 01:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 01:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 01:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 01:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 01:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 01:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 01:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 02:02:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 02:02:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 02:02:52 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2010-Aug-27 02:02:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 02:02:52 LOG5 end_task: Level: (2) ID = <10313> Status = 0 0 0 0 ok 2010-Aug-27 02:02:52 LOG1 fixed_driftmap: New position: year = 2010.6545799427079 RA = 23:56:46.2 RA/Dec = 23:57:21.1 +23:47:13.9 2010-Aug-27 02:02:52 NOTE fixed_driftmap: Correcting ZA to 5:26:00.2 ... 2010-Aug-27 02:02:52 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4333920774 -CF 2010-Aug-27 02:02:52 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 02:02:52 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 02:02:52 LOG5 begin_task: Level: (2) ID = <10315> Status = 0 0 0 0 ok 2010-Aug-27 02:02:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 02:02:52 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 02:02:52 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2010-Aug-27 02:02:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 02:02:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 02:02:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 02:02:52 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 02:02:52 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2010-Aug-27 02:02:52 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4333920774 -CF 2010-Aug-27 02:02:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 02:02:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 02:02:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 02:02:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 02:02:52 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 02:02:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 02:02:52 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2010-Aug-27 02:02:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 02:02:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 02:02:53 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 02:02:53 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 02:02:53 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2010-Aug-27 02:02:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 02:02:53 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 02:02:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 02:02:53 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2010-Aug-27 02:02:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 02:02:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 02:02:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 02:02:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 02:02:53 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 02:02:53 LOG5 begin_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2010-Aug-27 02:02:53 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 02:02:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 02:02:53 LOG5 end_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2010-Aug-27 02:02:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 02:02:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 02:02:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 02:02:53 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2010-Aug-27 02:02:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 02:02:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 02:02:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 02:02:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 02:02:53 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2010-Aug-27 02:02:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 02:02:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 02:02:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 02:02:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 02:02:53 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2010-Aug-27 02:02:53 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 02:02:53 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 02:02:53 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2010-Aug-27 02:02:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 02:02:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 02:02:53 INFO2 take_data: Starting WAPP 1-second scan: 23900025 2010-Aug-27 02:02:53 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 02:02:53 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2010-Aug-27 02:02:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 02:02:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 02:02:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21774.00 2010-Aug-27 02:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 02:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 02:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 02:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 02:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 02:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 02:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 02:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 02:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 02:02:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 02:02:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 02:02:55 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2010-Aug-27 02:02:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 02:02:55 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2010-Aug-27 02:02:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 02:02:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 02:02:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 02:02:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 02:02:55 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2010-Aug-27 02:02:55 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 02:02:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 02:02:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 02:02:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 02:02:55 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2010-Aug-27 02:02:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 02:02:55 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 02:02:55 LOG5 finish_task: Level: (2) ID = <10315> Status = 0 0 0 0 ok 2010-Aug-27 02:02:55 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 02:02:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 02:02:55 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 02:02:55 LOG5 end_task: Level: (2) ID = <10315> Status = 0 0 0 0 ok 2010-Aug-27 02:02:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2010-Aug-27 02:02:56 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2010-Aug-27 02:02:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 02:02:56 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 02:02:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 02:02:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 02:02:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 02:02:56 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 02:02:56 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 02:02:56 LOG5 begin_task: Level: (2) ID = <10324> Status = 0 0 0 0 ok 2010-Aug-27 02:02:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 02:02:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 02:02:56 INFO2 take_data: Starting WAPP 600-second scan: 23900026 2010-Aug-27 02:02:56 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 02:02:56 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2010-Aug-27 02:02:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 02:02:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 02:02:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 02:02:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21777.00 2010-Aug-27 02:02:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0012.fits 2010-Aug-27 02:02:56 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0012.fits} 2010-Aug-27 02:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 02:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 02:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 02:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 02:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 02:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 02:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 02:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 02:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 02:09:00 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 02:09:00.311 (seconds: 7740.311)!} 2010-Aug-27 02:09:00 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 02:09:00.311 (seconds: 7740.311)! 2010-Aug-27 02:09:01 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 7739.0 to 7740.0! 2010-Aug-27 02:09:02 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (7739.0 - 7741.0)! 2010-Aug-27 02:12:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 02:12:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 02:12:57 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2010-Aug-27 02:12:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 02:12:57 LOG5 end_task: Level: (2) ID = <10324> Status = 0 0 0 0 ok 2010-Aug-27 02:12:57 LOG1 fixed_driftmap: New position: year = 2010.654599114001 RA = 00:06:52.6 RA/Dec = 00:07:27.8 +23:47:13.6 2010-Aug-27 02:12:57 NOTE fixed_driftmap: Correcting ZA to 5:25:59.9 ... 2010-Aug-27 02:12:57 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4333084267 -CF 2010-Aug-27 02:12:57 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 02:12:57 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 02:12:57 LOG5 begin_task: Level: (2) ID = <10326> Status = 0 0 0 0 ok 2010-Aug-27 02:12:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 02:12:57 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 02:12:57 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2010-Aug-27 02:12:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 02:12:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 02:12:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 02:12:57 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 02:12:57 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2010-Aug-27 02:12:57 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4333084267 -CF 2010-Aug-27 02:12:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 02:12:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 02:12:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 02:12:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 02:12:57 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 02:12:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 02:12:57 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2010-Aug-27 02:12:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 02:12:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 02:12:57 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 02:12:57 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 02:12:57 LOG5 begin_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2010-Aug-27 02:12:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 02:12:58 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 02:12:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 02:12:58 LOG5 end_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2010-Aug-27 02:12:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 02:12:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 02:12:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 02:12:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 02:12:58 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 02:12:58 LOG5 begin_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2010-Aug-27 02:12:58 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 02:12:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 02:12:58 LOG5 end_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2010-Aug-27 02:12:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 02:12:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 02:12:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 02:12:58 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2010-Aug-27 02:12:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-27 02:12:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-27 02:12:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-27 02:12:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 02:12:58 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2010-Aug-27 02:12:58 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 02:12:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-27 02:12:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 02:12:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 02:12:58 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2010-Aug-27 02:12:58 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-27 02:12:58 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 02:12:58 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2010-Aug-27 02:12:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-27 02:12:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 02:12:58 INFO2 take_data: Starting WAPP 1-second scan: 23900027 2010-Aug-27 02:12:58 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 02:12:58 LOG5 begin_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2010-Aug-27 02:12:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 02:12:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-27 02:12:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22379.00 2010-Aug-27 02:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 02:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 02:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 02:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 02:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 02:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 02:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 02:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 02:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 02:13:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 02:13:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 02:13:00 LOG5 end_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2010-Aug-27 02:13:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 02:13:00 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2010-Aug-27 02:13:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-27 02:13:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-27 02:13:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-27 02:13:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-27 02:13:00 LOG5 begin_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2010-Aug-27 02:13:00 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-27 02:13:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-27 02:13:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-27 02:13:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-27 02:13:00 LOG5 end_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2010-Aug-27 02:13:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-27 02:13:00 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-27 02:13:00 LOG5 finish_task: Level: (2) ID = <10326> Status = 0 0 0 0 ok 2010-Aug-27 02:13:00 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-27 02:13:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-27 02:13:00 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-27 02:13:00 LOG5 end_task: Level: (2) ID = <10326> Status = 0 0 0 0 ok 2010-Aug-27 02:13:00 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2010-Aug-27 02:13:00 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2010-Aug-27 02:13:00 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Lyle Hoffman 2010-Aug-27 02:13:00 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Lyle Hoffman 2010-Aug-27 02:13:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Lyle Hoffman 2010-Aug-27 02:13:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Lyle Hoffman 2010-Aug-27 02:13:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-27 02:13:01 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-27 02:13:01 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-27 02:13:01 LOG5 begin_task: Level: (2) ID = <10335> Status = 0 0 0 0 ok 2010-Aug-27 02:13:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-27 02:13:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-27 02:13:01 INFO2 take_data: Starting WAPP 600-second scan: 23900028 2010-Aug-27 02:13:01 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-27 02:13:01 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2010-Aug-27 02:13:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Lyle Hoffman' 2010-Aug-27 02:13:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-27 02:13:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-27 02:13:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22382.00 2010-Aug-27 02:13:01 NOTE WAPPDATA-new_file: New FITS file: wapp.20100827.a2010.0013.fits 2010-Aug-27 02:13:01 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100827.a2010.0013.fits} 2010-Aug-27 02:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-27 02:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2010-Aug-27 02:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2010-Aug-27 02:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2010-Aug-27 02:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2010-Aug-27 02:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 02:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 02:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 02:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-27 02:23:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-27 02:23:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-27 02:23:02 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2010-Aug-27 02:23:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-27 02:23:02 LOG5 end_task: Level: (2) ID = <10335> Status = 0 0 0 0 ok 2010-Aug-27 02:23:02 LOG1 fixed_driftmap: New position: year = 2010.6546182852942 RA = 00:16:59.0 RA/Dec = 00:17:34.4 +23:47:12.9 2010-Aug-27 02:23:02 NOTE fixed_driftmap: Correcting ZA to 5:25:59.2 ... 2010-Aug-27 02:23:02 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.4331075658 -CF 2010-Aug-27 02:23:02 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-27 02:23:02 START begin_task: Starting task 'WAPP calibration' 2010-Aug-27 02:23:02 LOG5 begin_task: Level: (2) ID = <10337> Status = 0 0 0 0 ok 2010-Aug-27 02:23:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-27 02:23:02 START begin_task: Starting task 'selecting calibration type' 2010-Aug-27 02:23:02 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Aug-27 02:23:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-27 02:23:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-27 02:23:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 02:23:02 START begin_task: Starting task 'waiting on setcal' 2010-Aug-27 02:23:02 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2010-Aug-27 02:23:02 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.4331075658 -CF 2010-Aug-27 02:23:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 02:23:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-27 02:23:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-27 02:23:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 02:23:02 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-27 02:23:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-27 02:23:02 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2010-Aug-27 02:23:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-27 02:23:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 02:23:03 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-27 02:23:03 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 02:23:03 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2010-Aug-27 02:23:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-27 02:23:03 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 02:23:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 02:23:03 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2010-Aug-27 02:23:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 02:23:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-27 02:23:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-27 02:23:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-27 02:23:03 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-27 02:23:03 LOG5 begin_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2010-Aug-27 02:23:03 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-27 02:23:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-27 02:23:03 LOG5 end_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2010-Aug-27 02:23:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-27 02:23:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-27 02:23:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-27 02:23:03 L