2010-Aug-23 23:29:16 BEGIN executive: CIMA executive starting ... 2010-Aug-23 23:29:16 NOTE executive: STARTING NEW CIMA SESSION 2010-Aug-23 23:29:16 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-Aug-23 23:29:16 INFO4 executive: This is an ON-LINE session 2010-Aug-23 23:29:16 INFO4 executive: This is a LOCAL session 2010-Aug-23 23:29:16 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-Aug-23 23:29:16 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Weigel, Brault' 2010-Aug-23 23:29:16 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20100823' 2010-Aug-23 23:29:16 LOG2 log_preferences: Currently applied preferences: 2010-Aug-23 23:29:16 LOG2 log_preferences: prefs(dailylog) = daily 2010-Aug-23 23:29:16 LOG2 log_preferences: prefs(offlinelog) = skip 2010-Aug-23 23:29:16 LOG2 log_preferences: prefs(datawindow) = open 2010-Aug-23 23:29:16 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-Aug-23 23:29:16 LOG2 log_preferences: prefs(wappfailure) = abort 2010-Aug-23 23:29:16 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-Aug-23 23:29:16 LOG2 log_preferences: prefs(logcolours) = full 2010-Aug-23 23:29:16 LOG2 log_preferences: prefs(displaylevel) = INFO5 2010-Aug-23 23:29:16 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-Aug-23 23:29:16 LOG2 log_preferences: prefs(displayformat) = long 2010-Aug-23 23:29:16 LOG2 log_preferences: prefs(logformat) = new 2010-Aug-23 23:29:16 LOG2 log_preferences: prefs(fontsize) = 3 2010-Aug-23 23:29:16 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-Aug-23 23:29:16 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2010-Aug-23 23:29:16 ALERT executive: CIMA executive ready 2010-Aug-23 23:29:17 NOTE frontend: CIMA frontend ready 2010-Aug-23 23:29:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:29:18 LOG4 got_cormsg: From DATATAKING: setup 2010-Aug-23 23:29:23 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2010-Aug-23 23:29:23 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2010-Aug-23 23:29:23 LOG4 got_cormsg: From DATATAKING: vw% io 2010-Aug-23 23:29:24 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-Aug-23 23:29:24 LOG4 got_cormsg: From DATATAKING: 2010-Aug-23 23:29:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:29:24 LOG4 got_cormsg: From DATATAKING: tape stat 2010-Aug-23 23:29:24 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-Aug-23 23:29:24 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-Aug-23 23:29:24 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-Aug-23 23:29:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-Aug-23 23:29:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-Aug-23 23:29:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-Aug-23 23:29:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-Aug-23 23:29:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-Aug-23 23:29:24 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-Aug-23 23:29:24 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-Aug-23 23:29:24 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-Aug-23 23:29:24 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2010-Aug-23 23:29:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:29:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:29:30 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-Aug-23 23:29:30 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-Aug-23 23:29:30 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-Aug-23 23:29:30 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-Aug-23 23:29:30 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-23 23:29:30 NOTE select_receiver: Starting to select receiver ALFA 2010-Aug-23 23:29:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Aug-23 23:29:30 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Aug-23 23:29:30 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Aug-23 23:29:30 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Aug-23 23:29:30 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Aug-23 23:29:30 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-23 23:29:30 DONE finish_task: DONE finished selecting: receiver ALFA 2010-Aug-23 23:29:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-23 23:29:30 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Aug-23 23:29:30 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-23 23:29:30 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Aug-23 23:29:30 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Aug-23 23:29:37 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2010-Aug-23 23:29:38 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Aug-23 23:29:38 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Aug-23 23:29:38 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Aug-23 23:29:38 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Aug-23 23:29:38 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Aug-23 23:29:38 NOTE restart_wapp: Restarting all WAPPs 2010-Aug-23 23:29:38 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Aug-23 23:29:38 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Aug-23 23:29:38 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Aug-23 23:29:38 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-23 23:29:41 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Aug-23 23:29:41 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Aug-23 23:29:41 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Aug-23 23:29:41 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Aug-23 23:30:01 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc_aug10.cmd' 2010-Aug-23 23:30:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:30:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:23 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc_aug10.cmd' to executive ... 2010-Aug-23 23:31:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_10.conf} 2010-Aug-23 23:31:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {CATALOG galfa_togs.cat} 2010-Aug-23 23:31:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {SEEK galfasrc} 2010-Aug-23 23:31:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 10 {TRACKCURPOS} 2010-Aug-23 23:31:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 11 {ALFAANGLE 19.} 2010-Aug-23 23:31:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {WAITTRACK} 2010-Aug-23 23:31:23 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2010-Aug-23 23:31:23 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Aug-23 23:31:23 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc_aug10.cmd 1 1 7 2010-Aug-23 23:31:23 LOG4 run_command_file: Calling 'run_command_file command_galfasrc_aug10.cmd 1 1 7' 2010-Aug-23 23:31:23 BEGIN begin_task: Starting task 'running command file 'command_galfasrc_aug10.cmd'' 2010-Aug-23 23:31:23 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-23 23:31:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc_aug10.cmd' ...} 2010-Aug-23 23:31:23 NOTE run_command_file: Starting execution of command file 'command_galfasrc_aug10.cmd' from line 1 2010-Aug-23 23:31:23 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_10.conf' 2010-Aug-23 23:31:23 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Aug-23 23:31:23 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-23 23:31:23 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Aug-23 23:31:23 NOTE CIMA-load_config_file: Loading configuration file 'togs_10.conf' 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Aug-23 23:31:24 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Aug-23 23:31:25 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-23 23:31:25 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Aug-23 23:31:25 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-23 23:31:25 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Aug-23 23:31:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Aug-23 23:31:25 INFO1 config_iflo: Selecting receiver ALFA 2010-Aug-23 23:31:25 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-Aug-23 23:31:25 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2010-Aug-23 23:31:25 START begin_task: Starting task 'selecting receiver ALFA' 2010-Aug-23 23:31:25 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-23 23:31:25 NOTE select_receiver: Starting to select receiver ALFA 2010-Aug-23 23:31:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Aug-23 23:31:25 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Aug-23 23:31:25 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Aug-23 23:31:25 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Aug-23 23:31:25 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Aug-23 23:31:25 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-23 23:31:25 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-Aug-23 23:31:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-23 23:31:26 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Aug-23 23:31:26 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-23 23:31:26 START begin_task: Starting task 'waiting for receiver ALFA' 2010-Aug-23 23:31:26 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Aug-23 23:31:26 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-Aug-23 23:31:26 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Aug-23 23:31:26 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-Aug-23 23:31:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-Aug-23 23:31:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-23 23:31:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-23 23:31:26 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-23 23:31:26 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Aug-23 23:31:26 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-23 23:31:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-23 23:31:26 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Aug-23 23:31:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-23 23:31:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: alfafb 1 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-Aug-23 23:31:26 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Aug-23 23:31:26 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-Aug-23 23:31:26 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Aug-23 23:31:26 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Aug-23 23:31:26 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Aug-23 23:31:26 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Aug-23 23:31:26 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Aug-23 23:31:26 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-Aug-23 23:31:26 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-Aug-23 23:31:26 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-Aug-23 23:31:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Aug-23 23:31:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:31:26 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Aug-23 23:31:26 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-Aug-23 23:31:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:31:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:42 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-23 23:31:42 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Aug-23 23:31:42 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Aug-23 23:31:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Aug-23 23:31:42 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Aug-23 23:31:42 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-23 23:31:42 DONE finish_task: DONE finished configuration: IF/LO path 2010-Aug-23 23:31:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-23 23:31:42 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Aug-23 23:31:42 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-23 23:31:42 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Aug-23 23:31:42 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-23 23:31:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Aug-23 23:31:42 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Aug-23 23:31:42 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Aug-23 23:31:42 START begin_task: Starting task 'selecting calibration port' 2010-Aug-23 23:31:42 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Aug-23 23:31:43 LOG3 vw_send: To DATATAKING: calport 3 2010-Aug-23 23:31:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Aug-23 23:31:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:31:43 START begin_task: Starting task 'waiting on calport' 2010-Aug-23 23:31:43 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-Aug-23 23:31:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:43 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Aug-23 23:31:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:31:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:43 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-23 23:31:43 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Aug-23 23:31:43 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-Aug-23 23:31:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Aug-23 23:31:43 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Aug-23 23:31:43 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Aug-23 23:31:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-23 23:31:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-23 23:31:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-23 23:31:43 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Aug-23 23:31:43 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-23 23:31:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-23 23:31:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-23 23:31:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-23 23:31:43 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Aug-23 23:31:43 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Aug-23 23:31:43 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Aug-23 23:31:43 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Aug-23 23:31:43 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Aug-23 23:31:43 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Aug-23 23:31:43 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Aug-23 23:31:43 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Aug-23 23:31:43 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Aug-23 23:31:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:31:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:31:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:31:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:31:43 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Aug-23 23:31:43 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Aug-23 23:31:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-23 23:31:43 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Aug-23 23:31:43 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-23 23:31:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-23 23:31:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-23 23:31:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-23 23:31:43 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Aug-23 23:31:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:31:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:31:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:31:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:31:44 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Aug-23 23:31:44 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-23 23:31:44 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Aug-23 23:31:44 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-23 23:31:44 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Aug-23 23:31:44 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-23 23:31:44 COMMAND run_command_line: EXECUTING command 8: 'CATALOG galfa_togs.cat' 2010-Aug-23 23:31:44 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/galfa_togs.cat' 2010-Aug-23 23:31:44 COMMAND run_command_line: EXECUTING command 9: 'SEEK galfasrc' 2010-Aug-23 23:31:44 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/galfa_togs.cat galfasrc nooffset wait' 2010-Aug-23 23:31:44 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2010-Aug-23 23:31:44 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-23 23:31:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2010-Aug-23 23:31:44 LOG3 track_source: Calling 'track_source galfasrc 180.0 4. F 0.0 0.0 main small /share/obs4/usr/a2010/galfa_togs.cat 0 Topocentric velocity(optical)' 2010-Aug-23 23:31:44 START begin_task: Starting task 'sending tracking commands' 2010-Aug-23 23:31:44 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-23 23:31:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2010-Aug-23 23:31:44 INFO1 track_source: Starting to track galfasrc 2010-Aug-23 23:31:44 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2010-Aug-23 23:31:44 LOG3 vw_send: To DATATAKING: set ra 180.0 2010-Aug-23 23:31:44 LOG3 vw_send: To DATATAKING: set dec 4. 2010-Aug-23 23:31:44 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-23 23:31:44 LOG3 vw_send: To DATATAKING: pnt tr 180.0 4. -CF 2010-Aug-23 23:31:44 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-23 23:31:44 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-23 23:31:44 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-23 23:31:44 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-23 23:31:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-23 23:31:44 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-23 23:31:44 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-23 23:31:44 START begin_task: Starting task 'waiting on telescope' 2010-Aug-23 23:31:44 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-23 23:31:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-23 23:31:44 LOG3 waittrk: Start waittrk 5 2010-Aug-23 23:31:44 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-23 23:31:44 LOG5 begin_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2010-Aug-23 23:31:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-23 23:31:44 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2010-Aug-23 23:31:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Aug-23 23:31:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Aug-23 23:31:44 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2010-Aug-23 23:31:44 LOG4 got_cormsg: From DATATAKING: set dec 4. 2010-Aug-23 23:31:44 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2010-Aug-23 23:31:44 LOG4 got_cormsg: From DATATAKING: vw% 4. 2010-Aug-23 23:31:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:44 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-23 23:31:44 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 4. -CF 2010-Aug-23 23:31:44 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-23 23:31:44 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-23 23:31:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:31:44 NOTE WAPPDATA-new_file: New FITS file: wapp.20100823.a2010.0033.fits 2010-Aug-23 23:31:44 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100823.a2010.0033.fits} 2010-Aug-23 23:31:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-23 23:31:49 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-23 23:31:49 LOG5 end_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2010-Aug-23 23:31:49 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-23 23:31:49 LOG5 begin_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2010-Aug-23 23:32:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-23 23:32:19 LOG5 end_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2010-Aug-23 23:32:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-23 23:32:19 INFO2 waittrk: Now tracking galfasrc 2010-Aug-23 23:32:19 LOG4 waittrk: Current telescope position: Az = 179.73 ZA = 4.02 2010-Aug-23 23:32:19 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-23 23:32:19 LOG5 finish_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-23 23:32:19 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-23 23:32:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-23 23:32:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-23 23:32:19 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-23 23:32:19 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2010-Aug-23 23:32:19 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-23 23:32:19 DONE finish_task: DONE finished tracking: source 'galfasrc' 2010-Aug-23 23:32:19 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-23 23:32:19 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2010-Aug-23 23:32:19 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-23 23:32:19 COMMAND run_command_line: EXECUTING command 10: 'TRACKCURPOS' 2010-Aug-23 23:32:19 BEGIN begin_task: Starting task 'tracking current position' 2010-Aug-23 23:32:19 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-23 23:32:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2010-Aug-23 23:32:19 INFO1 track_current_pos: Starting to track the current commanded position RA = 21:14:01.6 and Dec = +22:18:23.4 2010-Aug-23 23:32:19 LOG3 track_source: Calling 'track_source Cur-pos 211401.6 221823.4 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-Aug-23 23:32:19 START begin_task: Starting task 'sending tracking commands' 2010-Aug-23 23:32:19 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-23 23:32:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2010-Aug-23 23:32:19 INFO1 track_source: Starting to track Cur-pos 2010-Aug-23 23:32:19 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2010-Aug-23 23:32:19 LOG3 vw_send: To DATATAKING: set ra 211401.6 2010-Aug-23 23:32:19 LOG3 vw_send: To DATATAKING: set dec 221823.4 2010-Aug-23 23:32:19 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-23 23:32:19 LOG3 vw_send: To DATATAKING: pnt tr 211401.6 221823.4 -CJ 2010-Aug-23 23:32:19 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-23 23:32:19 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-23 23:32:19 LOG5 finish_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-23 23:32:19 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-23 23:32:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-23 23:32:19 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-23 23:32:19 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-23 23:32:19 START begin_task: Starting task 'waiting on telescope' 2010-Aug-23 23:32:19 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-23 23:32:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-23 23:32:19 LOG3 waittrk: Start waittrk 5 2010-Aug-23 23:32:19 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-23 23:32:19 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2010-Aug-23 23:32:19 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2010-Aug-23 23:32:19 LOG4 got_cormsg: From DATATAKING: set ra 211401.6 2010-Aug-23 23:32:19 LOG4 got_cormsg: From DATATAKING: set dec 221823.4 2010-Aug-23 23:32:19 LOG4 got_cormsg: From DATATAKING: vw% 211401.6 2010-Aug-23 23:32:19 LOG4 got_cormsg: From DATATAKING: vw% 221823.4 2010-Aug-23 23:32:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:32:19 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-23 23:32:19 LOG4 got_cormsg: From DATATAKING: pnt tr 211401.6 221823.4 -CJ 2010-Aug-23 23:32:19 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-23 23:32:19 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-23 23:32:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:32:24 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-23 23:32:24 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2010-Aug-23 23:32:24 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-23 23:32:24 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Aug-23 23:32:31 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-23 23:32:31 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Aug-23 23:32:31 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-23 23:32:32 INFO2 waittrk: Now tracking Cur-pos 2010-Aug-23 23:32:32 LOG4 waittrk: Current telescope position: Az = 179.02 ZA = 4.02 2010-Aug-23 23:32:32 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-23 23:32:32 LOG5 finish_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-23 23:32:32 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-23 23:32:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-23 23:32:32 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-23 23:32:32 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-23 23:32:32 STOP finish_task: Finishing task 'tracking current position' 2010-Aug-23 23:32:32 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-23 23:32:32 DONE finish_task: DONE finished tracking: current position 2010-Aug-23 23:32:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-23 23:32:32 END end_task: Finishing task 'tracking current position' with status 'OK' 2010-Aug-23 23:32:32 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-23 23:32:32 COMMAND run_command_line: EXECUTING command 11: 'ALFAANGLE 19.' 2010-Aug-23 23:32:32 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19. 2010-Aug-23 23:32:32 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-23 23:32:32 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-23 23:32:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-23 23:32:32 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-23 23:32:32 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19. REPLY 2010-Aug-23 23:32:32 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Aug-23 23:32:32 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Aug-23 23:32:32 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Aug-23 23:33:24 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-23 23:33:24 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-23 23:33:24 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Aug-23 23:33:24 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Aug-23 23:33:24 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Aug-23 23:33:24 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-23 23:33:24 LOG5 finish_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-23 23:33:24 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-23 23:33:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-23 23:33:24 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-23 23:33:24 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-23 23:33:24 COMMAND run_command_line: EXECUTING command 12: 'WAITTRACK' 2010-Aug-23 23:33:24 BEGIN begin_task: Starting task 'waiting on telescope' 2010-Aug-23 23:33:24 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-23 23:33:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-23 23:33:24 LOG3 waittrk: Start waittrk 5 2010-Aug-23 23:33:24 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-23 23:33:24 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Aug-23 23:33:29 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-23 23:33:29 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Aug-23 23:33:29 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-23 23:33:29 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Aug-23 23:33:29 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-23 23:33:29 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Aug-23 23:33:29 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Aug-23 23:33:29 INFO2 waittrk: Now tracking Cur-pos 2010-Aug-23 23:33:29 LOG4 waittrk: Current telescope position: Az = 175.81 ZA = 4.03 2010-Aug-23 23:33:29 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-23 23:33:29 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-23 23:33:29 DONE finish_task: DONE finished waiting: telescope on source 2010-Aug-23 23:33:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-23 23:33:30 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-23 23:33:30 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-23 23:33:30 COMMAND run_command_line: EXECUTING command 16: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-Aug-23 23:33:30 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-Aug-23 23:33:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-23 23:33:30 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-Aug-23 23:33:30 BEGIN begin_task: Starting task 'smart frequency switching' 2010-Aug-23 23:33:30 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-23 23:33:30 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2010-Aug-23 23:33:30 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-Aug-23 23:33:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-Aug-23 23:33:30 START begin_task: Starting task 'selecting calibration type' 2010-Aug-23 23:33:30 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Aug-23 23:33:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-23 23:33:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-23 23:33:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:33:30 START begin_task: Starting task 'waiting on setcal' 2010-Aug-23 23:33:30 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2010-Aug-23 23:33:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-23 23:33:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:33:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:33:30 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-23 23:33:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-23 23:33:30 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2010-Aug-23 23:33:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-23 23:33:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-23 23:33:30 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-23 23:33:30 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-23 23:33:30 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Aug-23 23:33:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:33:32 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-23 23:33:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-23 23:33:32 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Aug-23 23:33:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-23 23:33:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-23 23:33:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-23 23:33:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-23 23:33:32 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-23 23:33:32 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-Aug-23 23:33:32 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-23 23:33:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-23 23:33:32 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-Aug-23 23:33:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-23 23:33:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-23 23:33:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-23 23:33:32 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Aug-23 23:33:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:33:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:33:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:33:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:33:32 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20100823.a2010.0033.fits' is empty! 2010-Aug-23 23:33:32 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-Aug-23 23:33:32 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Aug-23 23:33:32 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Aug-23 23:33:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-23 23:33:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-23 23:33:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-23 23:33:32 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Aug-23 23:33:32 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-23 23:33:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-23 23:33:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-23 23:33:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-23 23:33:32 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Aug-23 23:33:32 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Aug-23 23:33:32 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-23 23:33:32 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-23 23:33:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Aug-23 23:33:32 INFO2 adjust_power: Starting to adjust WAPP power 2010-Aug-23 23:33:32 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Aug-23 23:33:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Aug-23 23:33:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:33:32 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Aug-23 23:33:32 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Aug-23 23:33:32 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Aug-23 23:33:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:33:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-23 23:33:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:33:35 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-23 23:33:35 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Aug-23 23:33:35 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Aug-23 23:33:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Aug-23 23:33:35 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-23 23:33:35 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-23 23:33:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Aug-23 23:33:35 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-23 23:33:35 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-23 23:33:35 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-23 23:33:35 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-23 23:33:35 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Aug-23 23:33:35 LOG5 begin_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2010-Aug-23 23:33:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Aug-23 23:33:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:33:36 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Aug-23 23:33:36 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 6 dB 2010-Aug-23 23:33:36 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 3 3 dB 2010-Aug-23 23:33:36 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Aug-23 23:33:36 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Aug-23 23:33:36 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Aug-23 23:33:36 LOG5 end_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2010-Aug-23 23:33:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.881 0.953 ALFA beam 1: 0.952 1.011 2010-Aug-23 23:33:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.999 0.914 ALFA beam 3: 1.064 0.971 2010-Aug-23 23:33:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.101 0.881 ALFA beam 5: 1.097 0.890 2010-Aug-23 23:33:36 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.904 0.846 ALFA beam 7: 0.993 0.996 2010-Aug-23 23:33:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-23 23:33:36 LOG5 finish_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-23 23:33:36 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Aug-23 23:33:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-23 23:33:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-23 23:33:36 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-23 23:33:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-23 23:33:36 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-23 23:33:36 LOG5 finish_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-23 23:33:36 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Aug-23 23:33:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-23 23:33:36 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-23 23:33:36 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-23 23:33:36 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-Aug-23 23:33:36 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-23 23:33:36 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-23 23:33:36 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:33:36 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64608 J 2010-Aug-23 23:33:36 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:33:36 LOG2 antvel: Parameters to Doppler: Topocentric 99216 2010 235 0.0 2010-Aug-23 23:33:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:33:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-23 23:33:36 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-23 23:33:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:33:36 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:33:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-23 23:33:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:33:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-Aug-23 23:33:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:33:36 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Aug-23 23:33:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-23 23:33:36 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.263844 2010.6460825918321 18.999933 2010-Aug-23 23:33:36 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777899 22.306499999999996 2010-Aug-23 23:33:36 LOG4 log_alfabeam: ALFABEAM 1 21.235582599441582 22.203387005041208 2010-Aug-23 23:33:36 LOG4 log_alfabeam: ALFABEAM 2 21.240130646216045 22.277579612925276 2010-Aug-23 23:33:36 LOG4 log_alfabeam: ALFABEAM 3 21.238434330621345 22.381100878212202 2010-Aug-23 23:33:36 LOG4 log_alfabeam: ALFABEAM 4 21.231905323490061 22.409462214479568 2010-Aug-23 23:33:36 LOG4 log_alfabeam: ALFABEAM 5 21.227325372109050 22.333393469534780 2010-Aug-23 23:33:36 LOG4 log_alfabeam: ALFABEAM 6 21.229305487070835 22.230875521420046 2010-Aug-23 23:33:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500120 2010-Aug-23 23:33:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:33:37 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Aug-23 23:33:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:33:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-23 23:33:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:33:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:33:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:33:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-23 23:33:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12818.00 2010-Aug-23 23:33:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:33:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:33:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:33:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:33:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:33:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:33:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:33:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:33:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:33:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:33:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:33:48 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Aug-23 23:33:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:33:48 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Aug-23 23:33:48 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-Aug-23 23:33:48 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-23 23:33:48 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-23 23:33:48 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:33:48 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64608 J 2010-Aug-23 23:33:48 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:33:48 LOG2 antvel: Parameters to Doppler: Topocentric 99228 2010 235 0.0 2010-Aug-23 23:33:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:33:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-23 23:33:48 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-23 23:33:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:33:48 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:33:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-23 23:33:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:33:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-Aug-23 23:33:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:33:48 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Aug-23 23:33:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-23 23:33:48 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.267186 2010.6460829720891 18.999933 2010-Aug-23 23:33:48 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777831 22.306500000000010 2010-Aug-23 23:33:48 LOG4 log_alfabeam: ALFABEAM 1 21.235670353025686 22.203690628805656 2010-Aug-23 23:33:48 LOG4 log_alfabeam: ALFABEAM 2 21.240154924603068 22.278625682272793 2010-Aug-23 23:33:48 LOG4 log_alfabeam: ALFABEAM 3 21.238370292935706 22.381860715134348 2010-Aug-23 23:33:48 LOG4 log_alfabeam: ALFABEAM 4 21.231817641391796 22.409147639355623 2010-Aug-23 23:33:48 LOG4 log_alfabeam: ALFABEAM 5 21.227302961023202 22.332333141538030 2010-Aug-23 23:33:48 LOG4 log_alfabeam: ALFABEAM 6 21.229370163193842 22.230146949463769 2010-Aug-23 23:33:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500121 2010-Aug-23 23:33:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:33:49 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-Aug-23 23:33:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:33:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-23 23:33:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:33:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:33:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:33:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-23 23:33:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12830.00 2010-Aug-23 23:33:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:33:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:33:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:33:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:33:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:33:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:33:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:33:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:33:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:34:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:34:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:34:00 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-Aug-23 23:34:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:34:00 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Aug-23 23:34:00 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-Aug-23 23:34:00 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-23 23:34:00 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-23 23:34:00 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:34:00 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64608 J 2010-Aug-23 23:34:00 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:34:00 LOG2 antvel: Parameters to Doppler: Topocentric 99240 2010 235 0.0 2010-Aug-23 23:34:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:34:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-23 23:34:00 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-23 23:34:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:34:00 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:34:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-23 23:34:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:34:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-Aug-23 23:34:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:34:00 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Aug-23 23:34:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-23 23:34:00 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.270529 2010.6460833523461 18.999933 2010-Aug-23 23:34:00 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777856 22.306500000000010 2010-Aug-23 23:34:00 LOG4 log_alfabeam: ALFABEAM 1 21.235757693255568 22.204008085518556 2010-Aug-23 23:34:00 LOG4 log_alfabeam: ALFABEAM 2 21.240178275440361 22.279673961076057 2010-Aug-23 23:34:00 LOG4 log_alfabeam: ALFABEAM 3 21.238305712229760 22.382608731230274 2010-Aug-23 23:34:00 LOG4 log_alfabeam: ALFABEAM 4 21.231730391687602 22.408819296213252 2010-Aug-23 23:34:00 LOG4 log_alfabeam: ALFABEAM 5 21.227281498328658 22.331271223675888 2010-Aug-23 23:34:00 LOG4 log_alfabeam: ALFABEAM 6 21.229435327101307 22.229430344246172 2010-Aug-23 23:34:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500122 2010-Aug-23 23:34:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:34:01 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-Aug-23 23:34:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:34:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-23 23:34:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:34:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:34:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:34:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-23 23:34:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12842.00 2010-Aug-23 23:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:34:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:34:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:34:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:34:12 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-Aug-23 23:34:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:34:12 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Aug-23 23:34:12 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-Aug-23 23:34:12 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-23 23:34:12 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-23 23:34:12 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:34:12 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64608 J 2010-Aug-23 23:34:12 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:34:12 LOG2 antvel: Parameters to Doppler: Topocentric 99252 2010 235 0.0 2010-Aug-23 23:34:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:34:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-23 23:34:12 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-23 23:34:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:34:12 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:34:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-23 23:34:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:34:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-Aug-23 23:34:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:34:12 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Aug-23 23:34:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-23 23:34:12 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.273871 2010.6460837326031 18.999933 2010-Aug-23 23:34:12 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777831 22.306500000000000 2010-Aug-23 23:34:12 LOG4 log_alfabeam: ALFABEAM 1 21.235844534677998 22.204338966538522 2010-Aug-23 23:34:12 LOG4 log_alfabeam: ALFABEAM 2 21.240200680851476 22.280723379854038 2010-Aug-23 23:34:12 LOG4 log_alfabeam: ALFABEAM 3 21.238240657102263 22.383344242563528 2010-Aug-23 23:34:12 LOG4 log_alfabeam: ALFABEAM 4 21.231643659577905 22.408477608685761 2010-Aug-23 23:34:12 LOG4 log_alfabeam: ALFABEAM 5 21.227260999089999 22.330208800649693 2010-Aug-23 23:34:12 LOG4 log_alfabeam: ALFABEAM 6 21.229500909733584 22.228726344243373 2010-Aug-23 23:34:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500123 2010-Aug-23 23:34:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:34:13 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-Aug-23 23:34:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:34:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-23 23:34:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:34:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:34:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:34:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-23 23:34:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12854.00 2010-Aug-23 23:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:34:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:34:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:34:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:34:24 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-Aug-23 23:34:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:34:24 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Aug-23 23:34:24 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-Aug-23 23:34:24 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-23 23:34:24 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-23 23:34:24 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:34:24 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64608 J 2010-Aug-23 23:34:24 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:34:24 LOG2 antvel: Parameters to Doppler: Topocentric 99264 2010 235 0.0 2010-Aug-23 23:34:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:34:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-23 23:34:24 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-23 23:34:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:34:24 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:34:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-23 23:34:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:34:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-Aug-23 23:34:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:34:24 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-Aug-23 23:34:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-23 23:34:24 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.277214 2010.6460841128603 18.999933 2010-Aug-23 23:34:24 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777775 22.306499999999993 2010-Aug-23 23:34:24 LOG4 log_alfabeam: ALFABEAM 1 21.235930896852757 22.204683236325973 2010-Aug-23 23:34:24 LOG4 log_alfabeam: ALFABEAM 2 21.240222151492180 22.281774125393497 2010-Aug-23 23:34:24 LOG4 log_alfabeam: ALFABEAM 3 21.238175118987815 22.384067469272058 2010-Aug-23 23:34:24 LOG4 log_alfabeam: ALFABEAM 4 21.231557425340164 22.408122614123371 2010-Aug-23 23:34:24 LOG4 log_alfabeam: ALFABEAM 5 21.227241452093143 22.329145683856890 2010-Aug-23 23:34:24 LOG4 log_alfabeam: ALFABEAM 6 21.229566919951935 22.228034721566427 2010-Aug-23 23:34:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500124 2010-Aug-23 23:34:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:34:25 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Aug-23 23:34:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:34:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-23 23:34:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:34:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:34:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:34:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-23 23:34:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12866.00 2010-Aug-23 23:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:34:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:34:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:34:36 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Aug-23 23:34:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:34:36 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-Aug-23 23:34:36 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-Aug-23 23:34:36 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-23 23:34:36 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-23 23:34:36 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:34:36 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64608 J 2010-Aug-23 23:34:36 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:34:36 LOG2 antvel: Parameters to Doppler: Topocentric 99276 2010 235 0.0 2010-Aug-23 23:34:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:34:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-23 23:34:36 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-23 23:34:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:34:36 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:34:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-23 23:34:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:34:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-Aug-23 23:34:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:34:36 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Aug-23 23:34:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-23 23:34:36 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.280556 2010.6460844931173 18.999933 2010-Aug-23 23:34:36 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777810 22.306500000000000 2010-Aug-23 23:34:36 LOG4 log_alfabeam: ALFABEAM 1 21.236016696575671 22.205040441371242 2010-Aug-23 23:34:36 LOG4 log_alfabeam: ALFABEAM 2 21.240242672914270 22.282825130180523 2010-Aug-23 23:34:36 LOG4 log_alfabeam: ALFABEAM 3 21.238109167775377 22.384777775485638 2010-Aug-23 23:34:36 LOG4 log_alfabeam: ALFABEAM 4 21.231471771846937 22.407754780501872 2010-Aug-23 23:34:36 LOG4 log_alfabeam: ALFABEAM 5 21.227222868928212 22.328082953078098 2010-Aug-23 23:34:36 LOG4 log_alfabeam: ALFABEAM 6 21.229633287656288 22.227356066721423 2010-Aug-23 23:34:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500125 2010-Aug-23 23:34:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:34:37 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Aug-23 23:34:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:34:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-23 23:34:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:34:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:34:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:34:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-23 23:34:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12878.00 2010-Aug-23 23:34:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:34:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:34:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:34:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:34:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:34:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:34:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:34:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:34:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:34:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:34:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:34:48 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Aug-23 23:34:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:34:48 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Aug-23 23:34:48 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-Aug-23 23:34:48 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-23 23:34:48 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-23 23:34:48 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:34:48 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64608 J 2010-Aug-23 23:34:48 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:34:48 LOG2 antvel: Parameters to Doppler: Topocentric 99288 2010 235 0.0 2010-Aug-23 23:34:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:34:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-23 23:34:48 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-23 23:34:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:34:48 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:34:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-23 23:34:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:34:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-Aug-23 23:34:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:34:48 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Aug-23 23:34:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-23 23:34:48 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.283899 2010.6460848733743 18.999933 2010-Aug-23 23:34:48 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777831 22.306500000000003 2010-Aug-23 23:34:48 LOG4 log_alfabeam: ALFABEAM 1 21.236101954557416 22.205410534403573 2010-Aug-23 23:34:48 LOG4 log_alfabeam: ALFABEAM 2 21.240262256931562 22.283876587156445 2010-Aug-23 23:34:48 LOG4 log_alfabeam: ALFABEAM 3 21.238042794946111 22.385475399967742 2010-Aug-23 23:34:48 LOG4 log_alfabeam: ALFABEAM 4 21.231386678192241 22.407374156541195 2010-Aug-23 23:34:48 LOG4 log_alfabeam: ALFABEAM 5 21.227205237227707 22.327020412124295 2010-Aug-23 23:34:48 LOG4 log_alfabeam: ALFABEAM 6 21.229700021774480 22.226690133630452 2010-Aug-23 23:34:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500126 2010-Aug-23 23:34:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:34:49 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-Aug-23 23:34:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:34:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-23 23:34:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:34:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:34:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:34:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-23 23:34:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12890.00 2010-Aug-23 23:34:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:34:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:34:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:34:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:34:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:34:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:34:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:34:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:34:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:35:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:35:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:35:00 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-Aug-23 23:35:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:35:00 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Aug-23 23:35:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Aug-23 23:35:00 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-23 23:35:00 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-23 23:35:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-23 23:35:00 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Aug-23 23:35:00 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-23 23:35:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-23 23:35:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-23 23:35:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-23 23:35:00 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Aug-23 23:35:00 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-Aug-23 23:35:00 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-23 23:35:00 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-23 23:35:00 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:35:00 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:35:00 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:35:00 LOG2 antvel: Parameters to Doppler: Topocentric 99300 2010 235 0.0 2010-Aug-23 23:35:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:35:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-23 23:35:00 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-23 23:35:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:35:00 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:35:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-23 23:35:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:35:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-Aug-23 23:35:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:35:00 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Aug-23 23:35:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-Aug-23 23:35:00 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.287241 2010.6460852536313 18.999933 2010-Aug-23 23:35:00 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777778 22.306500000000003 2010-Aug-23 23:35:00 LOG4 log_alfabeam: ALFABEAM 1 21.236186590131119 22.205793020416735 2010-Aug-23 23:35:00 LOG4 log_alfabeam: ALFABEAM 2 21.240280892481771 22.284927435304471 2010-Aug-23 23:35:00 LOG4 log_alfabeam: ALFABEAM 3 21.237976071335666 22.386159756202307 2010-Aug-23 23:35:00 LOG4 log_alfabeam: ALFABEAM 4 21.231302224636593 22.406981251093775 2010-Aug-23 23:35:00 LOG4 log_alfabeam: ALFABEAM 5 21.227188565172657 22.325959131320857 2010-Aug-23 23:35:00 LOG4 log_alfabeam: ALFABEAM 6 21.229767051502300 22.226037463882815 2010-Aug-23 23:35:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500127 2010-Aug-23 23:35:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:35:01 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-Aug-23 23:35:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:35:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-23 23:35:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:35:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:35:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:35:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-23 23:35:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12902.00 2010-Aug-23 23:35:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:35:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:35:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:35:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:35:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:35:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:35:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:35:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:35:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:35:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:35:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:35:12 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-Aug-23 23:35:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:35:12 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Aug-23 23:35:12 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-Aug-23 23:35:12 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-23 23:35:12 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-23 23:35:12 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:35:12 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:35:12 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:35:12 LOG2 antvel: Parameters to Doppler: Topocentric 99312 2010 235 0.0 2010-Aug-23 23:35:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:35:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-23 23:35:12 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-23 23:35:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:35:12 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:35:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-23 23:35:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:35:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-Aug-23 23:35:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:35:12 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Aug-23 23:35:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-Aug-23 23:35:12 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.290583 2010.6460856338883 18.999933 2010-Aug-23 23:35:12 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777799 22.306499999999993 2010-Aug-23 23:35:12 LOG4 log_alfabeam: ALFABEAM 1 21.236270600242069 22.206187722800408 2010-Aug-23 23:35:12 LOG4 log_alfabeam: ALFABEAM 2 21.240298587320698 22.285977561998390 2010-Aug-23 23:35:12 LOG4 log_alfabeam: ALFABEAM 3 21.237909008391206 22.386830902866127 2010-Aug-23 23:35:12 LOG4 log_alfabeam: ALFABEAM 4 21.231218413948969 22.406576244871960 2010-Aug-23 23:35:12 LOG4 log_alfabeam: ALFABEAM 5 21.227172843881277 22.324899221478478 2010-Aug-23 23:35:12 LOG4 log_alfabeam: ALFABEAM 6 21.229834365841977 22.225397982662056 2010-Aug-23 23:35:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500128 2010-Aug-23 23:35:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:35:13 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Aug-23 23:35:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:35:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-23 23:35:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:35:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:35:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:35:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-23 23:35:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12914.00 2010-Aug-23 23:35:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:35:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:35:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:35:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:35:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:35:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:35:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:35:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:35:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:35:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:35:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:35:24 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Aug-23 23:35:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:35:24 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Aug-23 23:35:24 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-Aug-23 23:35:24 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-23 23:35:24 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-23 23:35:24 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:35:24 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:35:24 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:35:24 LOG2 antvel: Parameters to Doppler: Topocentric 99324 2010 235 0.0 2010-Aug-23 23:35:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:35:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-23 23:35:24 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-23 23:35:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:35:24 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:35:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-23 23:35:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:35:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-Aug-23 23:35:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:35:24 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Aug-23 23:35:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-Aug-23 23:35:24 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.293926 2010.6460860141456 18.999933 2010-Aug-23 23:35:24 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777807 22.306500000000010 2010-Aug-23 23:35:24 LOG4 log_alfabeam: ALFABEAM 1 21.236353982137182 22.206594468452302 2010-Aug-23 23:35:24 LOG4 log_alfabeam: ALFABEAM 2 21.240315349158614 22.287026859251217 2010-Aug-23 23:35:24 LOG4 log_alfabeam: ALFABEAM 3 21.237841617210542 22.387488900024778 2010-Aug-23 23:35:24 LOG4 log_alfabeam: ALFABEAM 4 21.231135248594022 22.406159314926988 2010-Aug-23 23:35:24 LOG4 log_alfabeam: ALFABEAM 5 21.227158064537306 22.323840788480165 2010-Aug-23 23:35:24 LOG4 log_alfabeam: ALFABEAM 6 21.229901954162067 22.224771614144146 2010-Aug-23 23:35:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500129 2010-Aug-23 23:35:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:35:25 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Aug-23 23:35:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:35:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-23 23:35:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:35:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:35:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:35:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-23 23:35:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12926.00 2010-Aug-23 23:35:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:35:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:35:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:35:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:35:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:35:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:35:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:35:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:35:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:35:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:35:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:35:36 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Aug-23 23:35:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:35:36 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Aug-23 23:35:36 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-Aug-23 23:35:36 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-23 23:35:36 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-23 23:35:36 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:35:36 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:35:36 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:35:36 LOG2 antvel: Parameters to Doppler: Topocentric 99336 2010 235 0.0 2010-Aug-23 23:35:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:35:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-23 23:35:36 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-23 23:35:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:35:36 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:35:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-23 23:35:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:35:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-Aug-23 23:35:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:35:36 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Aug-23 23:35:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-Aug-23 23:35:36 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.297268 2010.6460863944026 18.999933 2010-Aug-23 23:35:36 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777842 22.306500000000010 2010-Aug-23 23:35:36 LOG4 log_alfabeam: ALFABEAM 1 21.236436659417450 22.207012707127433 2010-Aug-23 23:35:36 LOG4 log_alfabeam: ALFABEAM 2 21.240331171859854 22.288074283807987 2010-Aug-23 23:35:36 LOG4 log_alfabeam: ALFABEAM 3 21.237773969410998 22.388133236396079 2010-Aug-23 23:35:36 LOG4 log_alfabeam: ALFABEAM 4 21.231052804464266 22.405731024270395 2010-Aug-23 23:35:36 LOG4 log_alfabeam: ALFABEAM 5 21.227144230403553 22.322784880530889 2010-Aug-23 23:35:36 LOG4 log_alfabeam: ALFABEAM 6 21.229969745223752 22.224158825938289 2010-Aug-23 23:35:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500130 2010-Aug-23 23:35:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:35:37 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-Aug-23 23:35:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:35:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-23 23:35:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:35:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:35:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:35:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-23 23:35:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12938.00 2010-Aug-23 23:35:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:35:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:35:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:35:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:35:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:35:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:35:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:35:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:35:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:35:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:35:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:35:48 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-Aug-23 23:35:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:35:48 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Aug-23 23:35:48 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-Aug-23 23:35:48 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-23 23:35:48 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-23 23:35:48 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:35:48 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:35:48 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:35:48 LOG2 antvel: Parameters to Doppler: Topocentric 99348 2010 235 0.0 2010-Aug-23 23:35:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:35:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-23 23:35:48 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-23 23:35:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:35:48 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:35:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-23 23:35:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:35:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-Aug-23 23:35:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:35:48 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Aug-23 23:35:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-Aug-23 23:35:48 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.300611 2010.6460867746596 18.999933 2010-Aug-23 23:35:48 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777778 22.306500000000000 2010-Aug-23 23:35:48 LOG4 log_alfabeam: ALFABEAM 1 21.236518656155848 22.207442372611236 2010-Aug-23 23:35:48 LOG4 log_alfabeam: ALFABEAM 2 21.240346069814809 22.289120053821009 2010-Aug-23 23:35:48 LOG4 log_alfabeam: ALFABEAM 3 21.237706055749172 22.388764196988337 2010-Aug-23 23:35:48 LOG4 log_alfabeam: ALFABEAM 4 21.230971057228075 22.405291439461497 2010-Aug-23 23:35:48 LOG4 log_alfabeam: ALFABEAM 5 21.227131326609012 22.321731272860898 2010-Aug-23 23:35:48 LOG4 log_alfabeam: ALFABEAM 6 21.230037748929767 22.223559327678167 2010-Aug-23 23:35:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500131 2010-Aug-23 23:35:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:35:49 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Aug-23 23:35:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:35:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-23 23:35:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:35:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:35:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:35:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12950.00 2010-Aug-23 23:35:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-23 23:35:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:35:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:35:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:35:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:35:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:35:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:35:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:35:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:35:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:36:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:36:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:36:00 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Aug-23 23:36:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:36:00 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Aug-23 23:36:00 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-Aug-23 23:36:00 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-23 23:36:00 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-23 23:36:00 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:36:00 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:36:00 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:36:00 LOG2 antvel: Parameters to Doppler: Topocentric 99360 2010 235 0.0 2010-Aug-23 23:36:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:36:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-23 23:36:00 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-23 23:36:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:36:00 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:36:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-23 23:36:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:36:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-Aug-23 23:36:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:36:00 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Aug-23 23:36:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-Aug-23 23:36:00 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.303953 2010.6460871549166 18.999933 2010-Aug-23 23:36:00 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777775 22.306500000000003 2010-Aug-23 23:36:00 LOG4 log_alfabeam: ALFABEAM 1 21.236599899051054 22.207882882829907 2010-Aug-23 23:36:00 LOG4 log_alfabeam: ALFABEAM 2 21.240360040026612 22.290163142807298 2010-Aug-23 23:36:00 LOG4 log_alfabeam: ALFABEAM 3 21.237637947948713 22.389381320701904 2010-Aug-23 23:36:00 LOG4 log_alfabeam: ALFABEAM 4 21.230890079621378 22.404841154540211 2010-Aug-23 23:36:00 LOG4 log_alfabeam: ALFABEAM 5 21.227119353309281 22.320680994103103 2010-Aug-23 23:36:00 LOG4 log_alfabeam: ALFABEAM 6 21.230105894150540 22.222973537987407 2010-Aug-23 23:36:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500132 2010-Aug-23 23:36:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:36:01 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Aug-23 23:36:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:36:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-23 23:36:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:36:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:36:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:36:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-23 23:36:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12962.00 2010-Aug-23 23:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:36:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:36:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:36:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:36:12 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Aug-23 23:36:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:36:12 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Aug-23 23:36:12 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-Aug-23 23:36:12 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-23 23:36:12 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-23 23:36:12 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:36:12 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:36:12 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:36:12 LOG2 antvel: Parameters to Doppler: Topocentric 99372 2010 235 0.0 2010-Aug-23 23:36:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:36:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-23 23:36:12 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-23 23:36:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:36:12 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:36:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-23 23:36:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:36:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-Aug-23 23:36:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:36:12 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Aug-23 23:36:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-Aug-23 23:36:12 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.307296 2010.6460875351736 18.999933 2010-Aug-23 23:36:12 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777807 22.306500000000003 2010-Aug-23 23:36:12 LOG4 log_alfabeam: ALFABEAM 1 21.236680413640634 22.208334168459437 2010-Aug-23 23:36:12 LOG4 log_alfabeam: ALFABEAM 2 21.240373097737603 22.291203782327901 2010-Aug-23 23:36:12 LOG4 log_alfabeam: ALFABEAM 3 21.237569636162185 22.389984909946648 2010-Aug-23 23:36:12 LOG4 log_alfabeam: ALFABEAM 4 21.230809845831640 22.404380238680321 2010-Aug-23 23:36:12 LOG4 log_alfabeam: ALFABEAM 5 21.227108294833190 22.319633804883431 2010-Aug-23 23:36:12 LOG4 log_alfabeam: ALFABEAM 6 21.230174191474980 22.222401150169659 2010-Aug-23 23:36:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500133 2010-Aug-23 23:36:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:36:13 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Aug-23 23:36:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:36:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-23 23:36:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:36:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:36:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:36:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-23 23:36:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12974.00 2010-Aug-23 23:36:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:36:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:36:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:36:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:36:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:36:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:36:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:36:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:36:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:36:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:36:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:36:24 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Aug-23 23:36:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:36:24 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Aug-23 23:36:24 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2010-Aug-23 23:36:24 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Aug-23 23:36:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Aug-23 23:36:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-23 23:36:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-23 23:36:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-23 23:36:24 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Aug-23 23:36:24 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-23 23:36:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-23 23:36:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-23 23:36:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-23 23:36:24 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Aug-23 23:36:24 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Aug-23 23:36:24 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-Aug-23 23:36:24 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-23 23:36:24 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-23 23:36:24 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:36:24 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:36:24 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:36:24 LOG2 antvel: Parameters to Doppler: Topocentric 99384 2010 235 0.0 2010-Aug-23 23:36:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:36:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-23 23:36:24 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-23 23:36:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:36:24 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:36:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-23 23:36:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:36:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-Aug-23 23:36:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:36:24 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-Aug-23 23:36:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-23 23:36:24 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.310638 2010.6460879154308 18.999933 2010-Aug-23 23:36:24 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777807 22.306500000000003 2010-Aug-23 23:36:24 LOG4 log_alfabeam: ALFABEAM 1 21.236760129875972 22.208795619758934 2010-Aug-23 23:36:24 LOG4 log_alfabeam: ALFABEAM 2 21.240385242942477 22.292240966220309 2010-Aug-23 23:36:24 LOG4 log_alfabeam: ALFABEAM 3 21.237501191903768 22.390574553237801 2010-Aug-23 23:36:24 LOG4 log_alfabeam: ALFABEAM 4 21.230730425289821 22.403909312739710 2010-Aug-23 23:36:24 LOG4 log_alfabeam: ALFABEAM 5 21.227098148395335 22.318590710836204 2010-Aug-23 23:36:24 LOG4 log_alfabeam: ALFABEAM 6 21.230242570183485 22.221842534683677 2010-Aug-23 23:36:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500134 2010-Aug-23 23:36:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:36:25 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-Aug-23 23:36:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:36:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-23 23:36:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:36:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:36:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:36:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-23 23:36:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12986.00 2010-Aug-23 23:36:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:36:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:36:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:36:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:36:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:36:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:36:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:36:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:36:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:36:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:36:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:36:36 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-Aug-23 23:36:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:36:36 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-Aug-23 23:36:36 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-Aug-23 23:36:36 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-23 23:36:36 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-23 23:36:36 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:36:36 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:36:36 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:36:36 LOG2 antvel: Parameters to Doppler: Topocentric 99396 2010 235 0.0 2010-Aug-23 23:36:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:36:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-23 23:36:36 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-23 23:36:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:36:36 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:36:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-23 23:36:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:36:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-Aug-23 23:36:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:36:36 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Aug-23 23:36:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-23 23:36:36 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.313981 2010.6460882956878 18.999933 2010-Aug-23 23:36:36 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777831 22.306500000000003 2010-Aug-23 23:36:36 LOG4 log_alfabeam: ALFABEAM 1 21.236839074784079 22.209267166902098 2010-Aug-23 23:36:36 LOG4 log_alfabeam: ALFABEAM 2 21.240396491609911 22.293274940938890 2010-Aug-23 23:36:36 LOG4 log_alfabeam: ALFABEAM 3 21.237432604562105 22.391150569263516 2010-Aug-23 23:36:36 LOG4 log_alfabeam: ALFABEAM 4 21.230651790682284 22.403428445885339 2010-Aug-23 23:36:36 LOG4 log_alfabeam: ALFABEAM 5 21.227088897660629 22.317551456618521 2010-Aug-23 23:36:36 LOG4 log_alfabeam: ALFABEAM 6 21.230311041698304 22.221297369753060 2010-Aug-23 23:36:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500135 2010-Aug-23 23:36:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:36:37 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Aug-23 23:36:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-23 23:36:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:36:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:36:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:36:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:36:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-23 23:36:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12998.00 2010-Aug-23 23:36:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:36:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:36:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:36:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:36:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:36:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:36:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:36:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:36:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:36:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:36:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:36:48 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Aug-23 23:36:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:36:48 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Aug-23 23:36:48 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-Aug-23 23:36:48 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-23 23:36:48 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-23 23:36:48 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:36:48 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:36:48 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:36:48 LOG2 antvel: Parameters to Doppler: Topocentric 99408 2010 235 0.0 2010-Aug-23 23:36:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:36:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-23 23:36:48 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-23 23:36:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:36:48 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:36:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-23 23:36:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:36:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-Aug-23 23:36:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:36:48 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Aug-23 23:36:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-23 23:36:48 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.317323 2010.6460886759448 18.999933 2010-Aug-23 23:36:48 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777807 22.306499999999996 2010-Aug-23 23:36:48 LOG4 log_alfabeam: ALFABEAM 1 21.236917181684742 22.209748176697044 2010-Aug-23 23:36:48 LOG4 log_alfabeam: ALFABEAM 2 21.240406846557736 22.294304723809269 2010-Aug-23 23:36:48 LOG4 log_alfabeam: ALFABEAM 3 21.237363945144210 22.391712595127494 2010-Aug-23 23:36:48 LOG4 log_alfabeam: ALFABEAM 4 21.230574008027173 22.402938281542401 2010-Aug-23 23:36:48 LOG4 log_alfabeam: ALFABEAM 5 21.227080537089162 22.316517021847936 2010-Aug-23 23:36:48 LOG4 log_alfabeam: ALFABEAM 6 21.230379535990881 22.220765978917385 2010-Aug-23 23:36:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500136 2010-Aug-23 23:36:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:36:49 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Aug-23 23:36:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:36:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-23 23:36:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:36:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:36:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:36:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-23 23:36:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13010.00 2010-Aug-23 23:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:36:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:37:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:37:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:37:00 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Aug-23 23:37:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:37:00 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Aug-23 23:37:00 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-Aug-23 23:37:00 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-23 23:37:00 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-23 23:37:00 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:37:00 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:37:00 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:37:00 LOG2 antvel: Parameters to Doppler: Topocentric 99420 2010 235 0.0 2010-Aug-23 23:37:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:37:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-23 23:37:00 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-23 23:37:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:37:00 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:37:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-23 23:37:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:37:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-Aug-23 23:37:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:37:00 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Aug-23 23:37:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-23 23:37:00 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.320666 2010.6460890562018 18.999933 2010-Aug-23 23:37:00 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777799 22.306500000000000 2010-Aug-23 23:37:00 LOG4 log_alfabeam: ALFABEAM 1 21.236994479091109 22.210238581377840 2010-Aug-23 23:37:00 LOG4 log_alfabeam: ALFABEAM 2 21.240416324344277 22.295330577356996 2010-Aug-23 23:37:00 LOG4 log_alfabeam: ALFABEAM 3 21.237295202133005 22.392260964393241 2010-Aug-23 23:37:00 LOG4 log_alfabeam: ALFABEAM 4 21.230497048517950 22.402438886304267 2010-Aug-23 23:37:00 LOG4 log_alfabeam: ALFABEAM 5 21.227073049827176 22.315487134170557 2010-Aug-23 23:37:00 LOG4 log_alfabeam: ALFABEAM 6 21.230448065445277 22.220248026820819 2010-Aug-23 23:37:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500137 2010-Aug-23 23:37:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:37:01 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-Aug-23 23:37:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:37:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-23 23:37:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:37:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:37:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:37:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-23 23:37:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13022.00 2010-Aug-23 23:37:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:37:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:37:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:37:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:37:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:37:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:37:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:37:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:37:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:37:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:37:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:37:12 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-Aug-23 23:37:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:37:12 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Aug-23 23:37:12 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-Aug-23 23:37:12 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-23 23:37:12 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-23 23:37:12 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:37:12 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:37:12 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:37:12 LOG2 antvel: Parameters to Doppler: Topocentric 99432 2010 235 0.0 2010-Aug-23 23:37:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:37:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-23 23:37:12 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-23 23:37:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:37:12 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:37:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-23 23:37:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:37:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-Aug-23 23:37:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:37:12 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Aug-23 23:37:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-23 23:37:12 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.324008 2010.6460894364589 18.999933 2010-Aug-23 23:37:12 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777782 22.306499999999996 2010-Aug-23 23:37:12 LOG4 log_alfabeam: ALFABEAM 1 21.237070903767886 22.210737728500749 2010-Aug-23 23:37:12 LOG4 log_alfabeam: ALFABEAM 2 21.240424930424147 22.296351545158245 2010-Aug-23 23:37:12 LOG4 log_alfabeam: ALFABEAM 3 21.237226445752686 22.392795361315528 2010-Aug-23 23:37:12 LOG4 log_alfabeam: ALFABEAM 4 21.230420974690972 22.401930921943443 2010-Aug-23 23:37:12 LOG4 log_alfabeam: ALFABEAM 5 21.227066427782109 22.314462744597012 2010-Aug-23 23:37:12 LOG4 log_alfabeam: ALFABEAM 6 21.230516560982050 22.219743791704801 2010-Aug-23 23:37:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500138 2010-Aug-23 23:37:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:37:13 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Aug-23 23:37:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:37:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-23 23:37:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:37:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:37:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:37:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-23 23:37:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13034.00 2010-Aug-23 23:37:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:37:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:37:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:37:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:37:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:37:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:37:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:37:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:37:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:37:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:37:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:37:24 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Aug-23 23:37:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:37:24 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Aug-23 23:37:24 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-Aug-23 23:37:24 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-23 23:37:24 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-23 23:37:24 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:37:24 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:37:24 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:37:24 LOG2 antvel: Parameters to Doppler: Topocentric 99444 2010 235 0.0 2010-Aug-23 23:37:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:37:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-23 23:37:24 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-23 23:37:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:37:24 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:37:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-23 23:37:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:37:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-Aug-23 23:37:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:37:24 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Aug-23 23:37:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-23 23:37:24 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.327351 2010.6460898167161 18.999933 2010-Aug-23 23:37:24 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777814 22.306500000000003 2010-Aug-23 23:37:24 LOG4 log_alfabeam: ALFABEAM 1 21.237146485684715 22.211245554826363 2010-Aug-23 23:37:24 LOG4 log_alfabeam: ALFABEAM 2 21.240432681801519 22.297367906671816 2010-Aug-23 23:37:24 LOG4 log_alfabeam: ALFABEAM 3 21.237157663457925 22.393316132695759 2010-Aug-23 23:37:24 LOG4 log_alfabeam: ALFABEAM 4 21.230345756281746 22.401414450020148 2010-Aug-23 23:37:24 LOG4 log_alfabeam: ALFABEAM 5 21.227060653733012 22.313443563048491 2010-Aug-23 23:37:24 LOG4 log_alfabeam: ALFABEAM 6 21.230585036055654 22.219252926340801 2010-Aug-23 23:37:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500139 2010-Aug-23 23:37:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:37:25 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Aug-23 23:37:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:37:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-23 23:37:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:37:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:37:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:37:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-23 23:37:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13046.00 2010-Aug-23 23:37:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:37:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:37:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:37:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:37:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:37:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:37:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:37:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:37:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:37:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:37:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:37:36 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Aug-23 23:37:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:37:36 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Aug-23 23:37:36 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-Aug-23 23:37:36 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-23 23:37:36 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-23 23:37:36 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:37:36 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:37:36 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:37:36 LOG2 antvel: Parameters to Doppler: Topocentric 99456 2010 235 0.0 2010-Aug-23 23:37:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:37:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-23 23:37:36 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-23 23:37:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:37:36 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:37:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-23 23:37:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:37:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-Aug-23 23:37:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:37:36 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Aug-23 23:37:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-23 23:37:36 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.330693 2010.6460901969731 18.999933 2010-Aug-23 23:37:36 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777810 22.306500000000010 2010-Aug-23 23:37:36 LOG4 log_alfabeam: ALFABEAM 1 21.237221165090158 22.211761392775628 2010-Aug-23 23:37:36 LOG4 log_alfabeam: ALFABEAM 2 21.240439586368193 22.298378734067672 2010-Aug-23 23:37:36 LOG4 log_alfabeam: ALFABEAM 3 21.237088924438790 22.393823008144665 2010-Aug-23 23:37:36 LOG4 log_alfabeam: ALFABEAM 4 21.230271452312849 22.400890146529150 2010-Aug-23 23:37:36 LOG4 log_alfabeam: ALFABEAM 5 21.227055717247229 22.312430509775076 2010-Aug-23 23:37:36 LOG4 log_alfabeam: ALFABEAM 6 21.230653422767951 22.218775665614007 2010-Aug-23 23:37:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500140 2010-Aug-23 23:37:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:37:37 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Aug-23 23:37:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:37:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-23 23:37:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:37:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:37:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:37:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-23 23:37:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13058.00 2010-Aug-23 23:37:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:37:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:37:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:37:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:37:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:37:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:37:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:37:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:37:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:37:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:37:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:37:48 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Aug-23 23:37:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:37:48 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Aug-23 23:37:48 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Aug-23 23:37:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-23 23:37:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-23 23:37:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-23 23:37:48 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Aug-23 23:37:48 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-23 23:37:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-23 23:37:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-23 23:37:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-23 23:37:48 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Aug-23 23:37:48 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-Aug-23 23:37:48 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-23 23:37:48 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-23 23:37:48 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:37:48 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:37:48 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:37:48 LOG2 antvel: Parameters to Doppler: Topocentric 99468 2010 235 0.0 2010-Aug-23 23:37:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:37:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-23 23:37:48 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-23 23:37:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:37:48 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:37:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-23 23:37:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:37:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-Aug-23 23:37:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:37:48 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-Aug-23 23:37:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-Aug-23 23:37:48 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.334035 2010.6460905772301 18.999933 2010-Aug-23 23:37:48 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777799 22.306500000000000 2010-Aug-23 23:37:48 LOG4 log_alfabeam: ALFABEAM 1 21.237294951412572 22.212285028145050 2010-Aug-23 23:37:48 LOG4 log_alfabeam: ALFABEAM 2 21.240445659731879 22.299384024337087 2010-Aug-23 23:37:48 LOG4 log_alfabeam: ALFABEAM 3 21.237020235563485 22.394316200344022 2010-Aug-23 23:37:48 LOG4 log_alfabeam: ALFABEAM 4 21.230198052946790 22.400358225955188 2010-Aug-23 23:37:48 LOG4 log_alfabeam: ALFABEAM 5 21.227051602000060 22.311423576934587 2010-Aug-23 23:37:48 LOG4 log_alfabeam: ALFABEAM 6 21.230721715313134 22.218311789095647 2010-Aug-23 23:37:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500141 2010-Aug-23 23:37:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:37:49 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-Aug-23 23:37:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:37:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-23 23:37:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:37:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:37:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:37:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-23 23:37:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13070.00 2010-Aug-23 23:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:37:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:38:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:38:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:38:00 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-Aug-23 23:38:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:38:00 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-Aug-23 23:38:00 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-Aug-23 23:38:00 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-23 23:38:00 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-23 23:38:00 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:38:00 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:38:00 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:38:00 LOG2 antvel: Parameters to Doppler: Topocentric 99480 2010 235 0.0 2010-Aug-23 23:38:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:38:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-23 23:38:00 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-23 23:38:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:38:00 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:38:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-23 23:38:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:38:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-Aug-23 23:38:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:38:00 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Aug-23 23:38:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-Aug-23 23:38:00 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.337378 2010.6460909574871 18.999933 2010-Aug-23 23:38:00 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777807 22.306500000000000 2010-Aug-23 23:38:00 LOG4 log_alfabeam: ALFABEAM 1 21.237367854219574 22.212816255637804 2010-Aug-23 23:38:00 LOG4 log_alfabeam: ALFABEAM 2 21.240450917095796 22.300383780003855 2010-Aug-23 23:38:00 LOG4 log_alfabeam: ALFABEAM 3 21.236951603134450 22.394795918762590 2010-Aug-23 23:38:00 LOG4 log_alfabeam: ALFABEAM 4 21.230125548217000 22.399818893746495 2010-Aug-23 23:38:00 LOG4 log_alfabeam: ALFABEAM 5 21.227048292108794 22.310422751243163 2010-Aug-23 23:38:00 LOG4 log_alfabeam: ALFABEAM 6 21.230789908433760 22.217861080100093 2010-Aug-23 23:38:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500142 2010-Aug-23 23:38:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:38:01 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Aug-23 23:38:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:38:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-23 23:38:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:38:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:38:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:38:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-23 23:38:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13082.00 2010-Aug-23 23:38:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:38:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:38:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:38:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:38:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:38:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:38:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:38:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:38:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:38:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:38:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:38:12 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Aug-23 23:38:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:38:12 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Aug-23 23:38:12 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-Aug-23 23:38:12 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-23 23:38:12 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-23 23:38:12 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:38:12 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:38:12 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:38:12 LOG2 antvel: Parameters to Doppler: Topocentric 99492 2010 235 0.0 2010-Aug-23 23:38:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:38:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-23 23:38:12 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-23 23:38:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:38:12 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:38:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-23 23:38:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:38:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-Aug-23 23:38:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:38:12 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Aug-23 23:38:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-Aug-23 23:38:12 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.340720 2010.6460913377443 18.999933 2010-Aug-23 23:38:12 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777796 22.306499999999996 2010-Aug-23 23:38:12 LOG4 log_alfabeam: ALFABEAM 1 21.237439818983230 22.213354392370270 2010-Aug-23 23:38:12 LOG4 log_alfabeam: ALFABEAM 2 21.240455369614445 22.301377119596211 2010-Aug-23 23:38:12 LOG4 log_alfabeam: ALFABEAM 3 21.236883094378392 22.395261957033952 2010-Aug-23 23:38:12 LOG4 log_alfabeam: ALFABEAM 4 21.230053991891378 22.399272839844347 2010-Aug-23 23:38:12 LOG4 log_alfabeam: ALFABEAM 5 21.227045774044104 22.309428903724427 2010-Aug-23 23:38:12 LOG4 log_alfabeam: ALFABEAM 6 21.230857936380037 22.217423712685992 2010-Aug-23 23:38:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500143 2010-Aug-23 23:38:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:38:13 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-Aug-23 23:38:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:38:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-23 23:38:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:38:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:38:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:38:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-23 23:38:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13094.00 2010-Aug-23 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:38:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:38:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:38:24 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-Aug-23 23:38:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:38:24 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Aug-23 23:38:24 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-Aug-23 23:38:24 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-23 23:38:24 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-23 23:38:24 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:38:24 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:38:24 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:38:24 LOG2 antvel: Parameters to Doppler: Topocentric 99504 2010 235 0.0 2010-Aug-23 23:38:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:38:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-23 23:38:24 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-23 23:38:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:38:24 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:38:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-23 23:38:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:38:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-Aug-23 23:38:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:38:24 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Aug-23 23:38:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-Aug-23 23:38:24 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.344063 2010.6460917180013 18.999933 2010-Aug-23 23:38:24 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777814 22.306500000000003 2010-Aug-23 23:38:24 LOG4 log_alfabeam: ALFABEAM 1 21.237510879030403 22.213899396176192 2010-Aug-23 23:38:24 LOG4 log_alfabeam: ALFABEAM 2 21.240459034758139 22.302364366622051 2010-Aug-23 23:38:24 LOG4 log_alfabeam: ALFABEAM 3 21.236814693784503 22.395714686779865 2010-Aug-23 23:38:24 LOG4 log_alfabeam: ALFABEAM 4 21.229983350364762 22.398720103553181 2010-Aug-23 23:38:24 LOG4 log_alfabeam: ALFABEAM 5 21.227044030335485 22.308441698959125 2010-Aug-23 23:38:24 LOG4 log_alfabeam: ALFABEAM 6 21.230925815616938 22.216999318334636 2010-Aug-23 23:38:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500144 2010-Aug-23 23:38:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:38:25 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-Aug-23 23:38:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:38:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-23 23:38:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:38:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:38:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:38:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-23 23:38:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13106.00 2010-Aug-23 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:38:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:38:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:38:36 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-Aug-23 23:38:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:38:36 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Aug-23 23:38:36 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-Aug-23 23:38:36 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-23 23:38:36 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-23 23:38:36 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:38:36 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:38:36 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:38:36 LOG2 antvel: Parameters to Doppler: Topocentric 99516 2010 235 0.0 2010-Aug-23 23:38:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:38:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-23 23:38:36 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-23 23:38:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:38:36 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:38:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-23 23:38:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:38:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-Aug-23 23:38:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:38:36 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Aug-23 23:38:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-Aug-23 23:38:36 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.347405 2010.6460920982584 18.999933 2010-Aug-23 23:38:36 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777782 22.306500000000003 2010-Aug-23 23:38:36 LOG4 log_alfabeam: ALFABEAM 1 21.237580983268472 22.214450578607053 2010-Aug-23 23:38:36 LOG4 log_alfabeam: ALFABEAM 2 21.240461925588601 22.303344672226988 2010-Aug-23 23:38:36 LOG4 log_alfabeam: ALFABEAM 3 21.236746467036504 22.396153941312935 2010-Aug-23 23:38:36 LOG4 log_alfabeam: ALFABEAM 4 21.229913673957142 22.398161379496116 2010-Aug-23 23:38:36 LOG4 log_alfabeam: ALFABEAM 5 21.227043045667152 22.307461973705220 2010-Aug-23 23:38:36 LOG4 log_alfabeam: ALFABEAM 6 21.230993482037039 22.216588033637194 2010-Aug-23 23:38:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500145 2010-Aug-23 23:38:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:38:37 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-Aug-23 23:38:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:38:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-23 23:38:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:38:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:38:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:38:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-23 23:38:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13118.00 2010-Aug-23 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:38:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:38:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:38:48 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-Aug-23 23:38:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:38:48 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Aug-23 23:38:48 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-Aug-23 23:38:48 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-23 23:38:48 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-23 23:38:48 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:38:48 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:38:48 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:38:48 LOG2 antvel: Parameters to Doppler: Topocentric 99528 2010 235 0.0 2010-Aug-23 23:38:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:38:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-23 23:38:48 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-23 23:38:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:38:48 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:38:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-23 23:38:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:38:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-Aug-23 23:38:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:38:48 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Aug-23 23:38:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-Aug-23 23:38:48 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.350748 2010.6460924785154 18.999933 2010-Aug-23 23:38:48 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777799 22.306500000000000 2010-Aug-23 23:38:48 LOG4 log_alfabeam: ALFABEAM 1 21.237650166202094 22.215007909294044 2010-Aug-23 23:38:48 LOG4 log_alfabeam: ALFABEAM 2 21.240464059506966 22.304318377447760 2010-Aug-23 23:38:48 LOG4 log_alfabeam: ALFABEAM 3 21.236678397336970 22.396580098604272 2010-Aug-23 23:38:48 LOG4 log_alfabeam: ALFABEAM 4 21.229844927899389 22.397596694759741 2010-Aug-23 23:38:48 LOG4 log_alfabeam: ALFABEAM 5 21.227042802727770 22.306489374775275 2010-Aug-23 23:38:48 LOG4 log_alfabeam: ALFABEAM 6 21.231060953386823 22.216189485116388 2010-Aug-23 23:38:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500146 2010-Aug-23 23:38:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:38:49 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Aug-23 23:38:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:38:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-23 23:38:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:38:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:38:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:38:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-23 23:38:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13130.00 2010-Aug-23 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:39:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:39:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:39:00 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Aug-23 23:39:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:39:00 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Aug-23 23:39:00 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-Aug-23 23:39:00 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-23 23:39:00 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-23 23:39:00 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:39:00 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:39:00 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:39:00 LOG2 antvel: Parameters to Doppler: Topocentric 99540 2010 235 0.0 2010-Aug-23 23:39:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:39:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-23 23:39:00 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-23 23:39:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:39:00 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:39:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-23 23:39:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:39:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-Aug-23 23:39:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-23 23:39:00 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Aug-23 23:39:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-Aug-23 23:39:00 LOG5 log_alfabeam: Parameters: 21.233777777777782 22.3065 21.354090 2010.6460928587724 18.999933 2010-Aug-23 23:39:00 LOG4 log_alfabeam: ALFABEAM 0 21.233777777777814 22.306500000000010 2010-Aug-23 23:39:00 LOG4 log_alfabeam: ALFABEAM 1 21.237718380104571 22.215570697650758 2010-Aug-23 23:39:00 LOG4 log_alfabeam: ALFABEAM 2 21.240465451267777 22.305284666955014 2010-Aug-23 23:39:00 LOG4 log_alfabeam: ALFABEAM 3 21.236610548672616 22.396993029050080 2010-Aug-23 23:39:00 LOG4 log_alfabeam: ALFABEAM 4 21.229777159139466 22.397026745250859 2010-Aug-23 23:39:00 LOG4 log_alfabeam: ALFABEAM 5 21.227043284635307 22.305524703967048 2010-Aug-23 23:39:00 LOG4 log_alfabeam: ALFABEAM 6 21.231128167336827 22.215803774518520 2010-Aug-23 23:39:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23500147 2010-Aug-23 23:39:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-23 23:39:01 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-Aug-23 23:39:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:39:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-23 23:39:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:39:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:39:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:39:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-23 23:39:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13142.00 2010-Aug-23 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:39:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:39:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-23 23:39:12 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-Aug-23 23:39:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-23 23:39:12 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Aug-23 23:39:12 INFO2 smartfreq: Switching off CAL 2010-Aug-23 23:39:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-23 23:39:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-23 23:39:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-23 23:39:12 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Aug-23 23:39:12 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-23 23:39:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-23 23:39:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-23 23:39:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-23 23:39:12 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Aug-23 23:39:12 INFO3 restore_frequencies: Restoring original frequencies 2010-Aug-23 23:39:12 LOG5 antvel: Calling 'antvel 211401.600000 221823.400000 J Topocentric 0' 2010-Aug-23 23:39:12 LOG2 antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:39:12 LOG2 antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:39:12 LOG2 antvel: Parameters to Doppler: Topocentric 99552 2010 235 0.0 2010-Aug-23 23:39:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:39:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-Aug-23 23:39:12 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-Aug-23 23:39:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:39:12 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:39:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-23 23:39:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:39:12 STOP finish_task: Finishing task 'smart frequency switching' 2010-Aug-23 23:39:12 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-23 23:39:12 DONE finish_task: DONE finished pattern: smart frequency switching 2010-Aug-23 23:39:12 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-23 23:39:12 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2010-Aug-23 23:39:13 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-23 23:39:13 NOTE run_command_file: DONE with command file processing 2010-Aug-23 23:39:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Aug-23 23:39:13 STOP finish_task: Finishing task 'running command file 'command_galfasrc_aug10.cmd'' 2010-Aug-23 23:39:13 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-23 23:39:13 DONE finish_task: DONE finished running: command file 'command_galfasrc_aug10.cmd' 2010-Aug-23 23:39:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-23 23:39:13 END end_task: Finishing task 'running command file 'command_galfasrc_aug10.cmd'' with status 'OK' 2010-Aug-23 23:39:13 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-23 23:39:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-23 23:39:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:39:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-23 23:39:24 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Aug-23 23:39:24 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Aug-23 23:39:24 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Aug-23 23:39:24 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Aug-23 23:39:24 LOG5 begin_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2010-Aug-23 23:39:24 NOTE restart_wapp: Restarting all WAPPs 2010-Aug-23 23:39:24 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Aug-23 23:39:24 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Aug-23 23:39:24 LOG5 end_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2010-Aug-23 23:39:24 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-23 23:39:24 LOG3 exec_msg: Closing socket 2010-Aug-23 23:39:24 LOG3 exec_msg: Closing socket 2010-Aug-23 23:39:24 LOG3 exec_msg: Closing socket 2010-Aug-23 23:39:24 LOG3 exec_msg: Closing socket 2010-Aug-23 23:39:27 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Aug-23 23:39:27 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Aug-23 23:39:27 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Aug-23 23:39:27 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Aug-23 23:39:43 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2010.conf' 2010-Aug-23 23:39:43 LOG2 CIMA-antvel: Precessing RA = 21:14:01.6 Dec = +22:18:23.4 Epoch = 2010.64609 J 2010-Aug-23 23:39:43 LOG2 CIMA-antvel: Computed apparent RA = 21:14:32.7 Dec = +22:21:15.6 2010-Aug-23 23:39:43 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 99583 2010 235 0.0 2010-Aug-23 23:39:43 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Aug-23 23:39:44 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-23 23:39:45 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2010-Aug-23 23:39:45 LOG4 exec_msg: From OBSERVER: config_iflo 2010-Aug-23 23:39:45 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Aug-23 23:39:45 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2010-Aug-23 23:39:45 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Aug-23 23:39:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Aug-23 23:39:45 LOG1 config_iflo: Receiver ALFA already selected 2010-Aug-23 23:39:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-23 23:39:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-23 23:39:45 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-23 23:39:45 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Aug-23 23:39:45 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-23 23:39:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-23 23:39:45 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Aug-23 23:39:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-23 23:39:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-23 23:39:45 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Aug-23 23:39:45 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Aug-23 23:39:45 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Aug-23 23:39:45 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Aug-23 23:39:45 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Aug-23 23:39:45 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Aug-23 23:39:45 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Aug-23 23:39:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-23 23:39:45 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Aug-23 23:39:45 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Aug-23 23:39:45 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Aug-23 23:39:45 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Aug-23 23:39:45 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Aug-23 23:39:45 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Aug-23 23:39:45 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Aug-23 23:39:45 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Aug-23 23:39:45 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Aug-23 23:39:45 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Aug-23 23:39:45 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Aug-23 23:39:45 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Aug-23 23:39:45 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Aug-23 23:39:45 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Aug-23 23:39:45 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Aug-23 23:39:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:39:45 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Aug-23 23:39:45 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Aug-23 23:39:45 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Aug-23 23:39:45 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Aug-23 23:39:45 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Aug-23 23:39:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Aug-23 23:39:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:39:45 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Aug-23 23:39:45 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-Aug-23 23:39:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-23 23:39:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Aug-23 23:39:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:39:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:39:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:39:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:39:46 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-Aug-23 23:39:46 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Aug-23 23:39:46 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-Aug-23 23:39:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Aug-23 23:39:46 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Aug-23 23:39:46 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2010-Aug-23 23:39:46 DONE finish_task: DONE finished configuration: IF/LO path 2010-Aug-23 23:39:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-23 23:39:46 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Aug-23 23:39:46 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2010-Aug-23 23:39:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:39:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Aug-23 23:39:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Aug-23 23:39:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Aug-23 23:39:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Aug-23 23:39:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Aug-23 23:39:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Aug-23 23:39:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Aug-23 23:39:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Aug-23 23:39:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-23 23:39:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-23 23:39:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-23 23:39:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-23 23:39:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Aug-23 23:39:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Aug-23 23:39:46 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Aug-23 23:39:46 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2010-Aug-23 23:39:46 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2010-Aug-23 23:39:46 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Aug-23 23:39:46 LOG5 begin_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Aug-23 23:39:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Aug-23 23:39:46 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Aug-23 23:39:46 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Aug-23 23:39:46 START begin_task: Starting task 'selecting calibration port' 2010-Aug-23 23:39:46 LOG5 begin_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2010-Aug-23 23:39:46 LOG3 vw_send: To DATATAKING: calport 3 2010-Aug-23 23:39:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Aug-23 23:39:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:39:46 START begin_task: Starting task 'waiting on calport' 2010-Aug-23 23:39:46 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Aug-23 23:39:46 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2010-Aug-23 23:39:46 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Aug-23 23:39:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:39:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:39:47 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-23 23:39:47 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Aug-23 23:39:47 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Aug-23 23:39:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Aug-23 23:39:47 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Aug-23 23:39:47 LOG5 end_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2010-Aug-23 23:39:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-23 23:39:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-23 23:39:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-23 23:39:47 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2010-Aug-23 23:39:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:39:47 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-23 23:39:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-23 23:39:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-23 23:39:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-23 23:39:47 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2010-Aug-23 23:39:47 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Aug-23 23:39:47 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Aug-23 23:39:47 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Aug-23 23:39:47 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Aug-23 23:39:47 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Aug-23 23:39:47 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Aug-23 23:39:47 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Aug-23 23:39:47 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Aug-23 23:39:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:39:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:39:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:39:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:39:47 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Aug-23 23:39:47 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Aug-23 23:39:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-23 23:39:47 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2010-Aug-23 23:39:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Aug-23 23:39:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Aug-23 23:39:47 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-23 23:39:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-23 23:39:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-23 23:39:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-23 23:39:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-23 23:39:47 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2010-Aug-23 23:39:47 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Aug-23 23:39:47 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Aug-23 23:39:47 LOG5 finish_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Aug-23 23:39:47 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Aug-23 23:39:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-23 23:39:47 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Aug-23 23:39:47 LOG5 end_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Aug-23 23:39:47 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-23 23:39:47 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2010-Aug-23 23:39:47 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2010-Aug-23 23:39:47 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-23 23:39:47 LOG5 begin_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Aug-23 23:39:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-23 23:39:47 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-23 23:39:48 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Aug-23 23:39:48 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-23 23:39:48 LOG5 finish_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Aug-23 23:39:48 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-23 23:39:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-23 23:39:48 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-23 23:39:48 LOG5 end_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Aug-23 23:39:48 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2010.conf' applied. 2010-Aug-23 23:39:48 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-23 23:39:48 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-23 23:40:30 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Aug-23 23:40:30 LOG4 exec_msg: From OBSERVER: track_new_source drift97p1 212400.0 +232854 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2010-Aug-23 23:40:30 LOG1 track_new_source: Calling 'track_new_source drift97p1 212400.0 +232854 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2010-Aug-23 23:40:30 BEGIN begin_task: Starting task 'selecting new source' 2010-Aug-23 23:40:30 LOG5 begin_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2010-Aug-23 23:40:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift97p1} INFO {Selecting source 'drift97p1' ...} 2010-Aug-23 23:40:30 LOG3 track_source: Calling 'track_source drift97p1 212400.0 +232854 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2010-Aug-23 23:40:30 START begin_task: Starting task 'sending tracking commands' 2010-Aug-23 23:40:30 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Aug-23 23:40:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift97p1} INFO {Slewing to source 'drift97p1' ...} 2010-Aug-23 23:40:30 INFO1 track_source: Starting to track drift97p1 2010-Aug-23 23:40:30 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift97p1" 2010-Aug-23 23:40:30 LOG3 vw_send: To DATATAKING: set ra 212400.0 2010-Aug-23 23:40:30 LOG3 vw_send: To DATATAKING: set dec +232854 2010-Aug-23 23:40:30 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-23 23:40:30 LOG3 vw_send: To DATATAKING: pnt tr 212400.0 +232854 -CJ 2010-Aug-23 23:40:30 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-23 23:40:30 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-23 23:40:30 LOG5 finish_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Aug-23 23:40:30 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-23 23:40:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-23 23:40:30 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-23 23:40:30 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Aug-23 23:40:30 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2010-Aug-23 23:40:30 START begin_task: Starting task 'applying pointing corrections' 2010-Aug-23 23:40:30 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Aug-23 23:40:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Aug-23 23:40:30 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Aug-23 23:40:30 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Aug-23 23:40:30 LOG5 finish_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Aug-23 23:40:30 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Aug-23 23:40:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-23 23:40:30 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Aug-23 23:40:30 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Aug-23 23:40:30 STOP finish_task: Finishing task 'selecting new source' 2010-Aug-23 23:40:30 LOG5 finish_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2010-Aug-23 23:40:30 DONE finish_task: DONE finished selecting: new source 2010-Aug-23 23:40:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-23 23:40:30 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Aug-23 23:40:31 LOG5 end_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2010-Aug-23 23:40:31 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift97p1" 2010-Aug-23 23:40:31 LOG4 got_cormsg: From DATATAKING: set ra 212400.0 2010-Aug-23 23:40:31 LOG4 got_cormsg: From DATATAKING: set dec +232854 2010-Aug-23 23:40:31 LOG4 got_cormsg: From DATATAKING: vw% 212400.0 2010-Aug-23 23:40:31 LOG4 got_cormsg: From DATATAKING: vw% +232854 2010-Aug-23 23:40:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:40:31 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-23 23:40:31 LOG4 got_cormsg: From DATATAKING: pnt tr 212400.0 +232854 -CJ 2010-Aug-23 23:40:31 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-23 23:40:31 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-23 23:40:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:40:31 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Aug-23 23:40:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:41:39 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2010-Aug-23 23:41:39 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2010-Aug-23 23:41:39 BEGIN begin_task: Starting task 'adjusting WAPP power' 2010-Aug-23 23:41:39 LOG5 begin_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2010-Aug-23 23:41:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Aug-23 23:41:39 INFO2 adjust_power: Starting to adjust WAPP power 2010-Aug-23 23:41:39 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Aug-23 23:41:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Aug-23 23:41:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:41:39 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Aug-23 23:41:39 LOG5 begin_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Aug-23 23:41:39 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Aug-23 23:41:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:41:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:41:42 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-23 23:41:42 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Aug-23 23:41:42 LOG5 end_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Aug-23 23:41:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Aug-23 23:41:42 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-23 23:41:42 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-Aug-23 23:41:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Aug-23 23:41:42 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-23 23:41:42 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-23 23:41:42 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-23 23:41:42 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-23 23:41:42 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Aug-23 23:41:42 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2010-Aug-23 23:41:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:41:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Aug-23 23:41:43 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Aug-23 23:41:43 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 6 dB 2010-Aug-23 23:41:43 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 3 3 dB 2010-Aug-23 23:41:43 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Aug-23 23:41:43 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Aug-23 23:41:43 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Aug-23 23:41:43 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2010-Aug-23 23:41:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.878 0.949 ALFA beam 1: 0.951 1.011 2010-Aug-23 23:41:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.007 0.922 ALFA beam 3: 1.063 0.972 2010-Aug-23 23:41:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.103 0.885 ALFA beam 5: 1.106 0.893 2010-Aug-23 23:41:43 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.904 0.843 ALFA beam 7: 0.994 0.995 2010-Aug-23 23:41:43 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-23 23:41:43 LOG5 finish_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-Aug-23 23:41:43 INFO2 finish_task: DONE finished adjusting: WAPP power 2010-Aug-23 23:41:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-23 23:41:43 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-23 23:41:43 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-Aug-23 23:41:43 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2010-Aug-23 23:41:43 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-23 23:41:43 LOG5 finish_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2010-Aug-23 23:41:43 DONE finish_task: DONE finished adjusting: WAPP power levels 2010-Aug-23 23:41:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-23 23:41:43 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-23 23:41:43 LOG5 end_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2010-Aug-23 23:41:47 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2010-Aug-23 23:41:47 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift97p1 212400.0 +232854 J 0 Topocentric velocity(optical) 2010-Aug-23 23:41:47 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift97p1 212400.0 +232854 J 0 Topocentric velocity(optical)' 2010-Aug-23 23:41:47 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Aug-23 23:41:47 LOG5 begin_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2010-Aug-23 23:41:47 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift97p1' 2010-Aug-23 23:41:47 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Aug-23 23:41:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift97p1} 2010-Aug-23 23:41:47 INFO5 fixed_driftmap: Start: year = 2010.6460981506832 RA = 21:24:31.1 Dec = +23:31:52.1 2010-Aug-23 23:41:47 NOTE fixed_driftmap: Setting ZA to 5:10:38.4 ... 2010-Aug-23 23:41:47 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 5.18 2010-Aug-23 23:41:47 LOG3 track_source: Calling 'track_source drift97p1 180.0 5.1773336992 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-Aug-23 23:41:47 START begin_task: Starting task 'sending tracking commands' 2010-Aug-23 23:41:47 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-Aug-23 23:41:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift97p1} INFO {Slewing to source 'drift97p1' ...} 2010-Aug-23 23:41:47 INFO1 track_source: Starting to track drift97p1 2010-Aug-23 23:41:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift97p1" 2010-Aug-23 23:41:47 LOG3 vw_send: To DATATAKING: set ra 180.0 2010-Aug-23 23:41:48 LOG3 vw_send: To DATATAKING: set dec 5.1773336992 2010-Aug-23 23:41:48 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-23 23:41:48 LOG3 vw_send: To DATATAKING: pnt tr 180.0 5.1773336992 -CF 2010-Aug-23 23:41:48 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-23 23:41:48 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-23 23:41:48 LOG5 finish_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-Aug-23 23:41:48 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-23 23:41:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-23 23:41:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-23 23:41:48 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-Aug-23 23:41:48 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-23 23:41:48 LOG5 begin_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2010-Aug-23 23:41:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-23 23:41:48 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-23 23:41:48 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2010-Aug-23 23:41:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Aug-23 23:41:48 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Aug-23 23:41:48 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-Aug-23 23:41:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift97p1" 2010-Aug-23 23:41:48 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2010-Aug-23 23:41:48 LOG4 got_cormsg: From DATATAKING: set dec 5.1773336992 2010-Aug-23 23:41:48 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2010-Aug-23 23:41:48 LOG4 got_cormsg: From DATATAKING: vw% 5.1773336992 2010-Aug-23 23:41:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:41:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-23 23:41:48 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 5.1773336992 -CF 2010-Aug-23 23:41:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-23 23:41:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-23 23:41:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:41:49 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-23 23:41:49 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-23 23:41:49 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Aug-23 23:41:49 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-Aug-23 23:41:49 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-23 23:41:49 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-23 23:41:49 LOG5 finish_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2010-Aug-23 23:41:49 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-23 23:41:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-23 23:41:49 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-23 23:41:49 LOG5 end_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2010-Aug-23 23:41:49 START begin_task: Starting task 'waiting on telescope' 2010-Aug-23 23:41:49 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Aug-23 23:41:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-23 23:41:49 LOG3 waittrk: Start waittrk 5 2010-Aug-23 23:41:49 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-23 23:41:49 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-Aug-23 23:41:54 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-23 23:41:54 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-Aug-23 23:41:54 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-23 23:41:54 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-Aug-23 23:42:02 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-23 23:42:02 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-Aug-23 23:42:02 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-23 23:42:02 INFO2 waittrk: Now tracking drift97p1 2010-Aug-23 23:42:02 LOG4 waittrk: Current telescope position: Az = 179.74 ZA = 5.20 2010-Aug-23 23:42:02 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-23 23:42:02 LOG5 finish_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Aug-23 23:42:02 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-23 23:42:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-23 23:42:02 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-23 23:42:02 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Aug-23 23:42:02 START begin_task: Starting task 'selecting calibration type' 2010-Aug-23 23:42:02 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Aug-23 23:42:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-23 23:42:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-23 23:42:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:42:02 START begin_task: Starting task 'waiting on setcal' 2010-Aug-23 23:42:02 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2010-Aug-23 23:42:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-23 23:42:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:42:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:42:02 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-23 23:42:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-23 23:42:02 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2010-Aug-23 23:42:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-23 23:42:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-23 23:42:02 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-23 23:42:02 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-23 23:42:02 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Aug-23 23:42:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:42:02 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-23 23:42:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-23 23:42:02 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Aug-23 23:42:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-23 23:42:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-23 23:42:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-23 23:42:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-23 23:42:02 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-23 23:42:02 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2010-Aug-23 23:42:03 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-23 23:42:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-23 23:42:03 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2010-Aug-23 23:42:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-23 23:42:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-23 23:42:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-23 23:42:03 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Aug-23 23:42:03 LOG5 dopset_later: Calling 'dopset_later 13.878594855238429' 2010-Aug-23 23:42:03 INFO3 dopset_later: Setting Doppler correction for 23:42:16 (13.9 seconds from now) 2010-Aug-23 23:42:03 LOG5 antvel: Calling 'antvel 180.000000 5.177334 F Topocentric 13.878594855238429' 2010-Aug-23 23:42:03 LOG2 antvel: Transforming current Az = 180.00 ZA = 5.18 to apparent RA = 21:24:31.1 Dec = +23:31:52.1 2010-Aug-23 23:42:03 LOG2 antvel: Parameters to Doppler: Topocentric 99736 2010 235 0.0 2010-Aug-23 23:42:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-23 23:42:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-Aug-23 23:42:03 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-Aug-23 23:42:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-23 23:42:03 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-23 23:42:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-23 23:42:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:42:03 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-23 23:42:03 LOG5 begin_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2010-Aug-23 23:42:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Aug-23 23:42:03 INFO2 adjust_power: Starting to adjust WAPP power 2010-Aug-23 23:42:03 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Aug-23 23:42:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Aug-23 23:42:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:42:03 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Aug-23 23:42:03 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Aug-23 23:42:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-23 23:42:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-23 23:42:03 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Aug-23 23:42:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:42:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:42:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:42:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:42:06 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-23 23:42:06 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Aug-23 23:42:06 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Aug-23 23:42:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Aug-23 23:42:06 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-23 23:42:06 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Aug-23 23:42:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Aug-23 23:42:06 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-23 23:42:06 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-23 23:42:06 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-23 23:42:06 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-23 23:42:06 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Aug-23 23:42:06 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2010-Aug-23 23:42:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Aug-23 23:42:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:42:06 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Aug-23 23:42:06 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 4 6 dB 2010-Aug-23 23:42:06 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 3 3 dB 2010-Aug-23 23:42:06 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Aug-23 23:42:06 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Aug-23 23:42:06 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Aug-23 23:42:06 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2010-Aug-23 23:42:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.896 0.953 ALFA beam 1: 0.953 1.012 2010-Aug-23 23:42:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.021 0.915 ALFA beam 3: 1.078 0.992 2010-Aug-23 23:42:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.895 0.903 ALFA beam 5: 1.109 0.895 2010-Aug-23 23:42:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.924 0.860 ALFA beam 7: 1.007 1.015 2010-Aug-23 23:42:06 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-23 23:42:06 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Aug-23 23:42:06 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Aug-23 23:42:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-23 23:42:06 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-23 23:42:06 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Aug-23 23:42:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-23 23:42:07 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-23 23:42:07 LOG5 finish_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2010-Aug-23 23:42:07 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Aug-23 23:42:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-23 23:42:07 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-23 23:42:07 LOG5 end_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2010-Aug-23 23:42:07 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 21:24:31.1 LST = 21:24:21.2 diff = 9.9 secs 2010-Aug-23 23:42:07 INFO2 fixed_driftmap: Waiting 7.9 seconds for RA 21:24:31 2010-Aug-23 23:42:07 INFO2 lstwait: Waiting for 7.9 secs from LST 21:24:21 to LST 21:24:29 ... 2010-Aug-23 23:42:07 LOG4 send_obs_status: To obs_status: <1> TASKTIME 7.8846056514002951 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Aug-23 23:42:07 START begin_task: Starting task 'waiting on wait on LST' 2010-Aug-23 23:42:07 LOG5 begin_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2010-Aug-23 23:42:15 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Aug-23 23:42:15 LOG5 end_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2010-Aug-23 23:42:15 LOG4 lstwait: Finished waiting 0.12 seconds late 2010-Aug-23 23:42:15 INFO3 lstwait: Finished waiting 2010-Aug-23 23:42:15 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Aug-23 23:42:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:42:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:42:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:42:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:42:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2010-Aug-23 23:42:15 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Aug-23 23:42:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-23 23:42:15 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-23 23:42:15 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-23 23:42:15 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2010-Aug-23 23:42:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-23 23:42:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-23 23:42:15 INFO2 take_data: Starting WAPP 600-second scan: 23500148 2010-Aug-23 23:42:15 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-23 23:42:15 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2010-Aug-23 23:42:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-23 23:42:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:42:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13336.00 2010-Aug-23 23:42:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-23 23:42:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20100823.a2010.0034.fits 2010-Aug-23 23:42:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100823.a2010.0034.fits} 2010-Aug-23 23:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:42:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:52:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:52:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-23 23:52:16 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2010-Aug-23 23:52:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-23 23:52:16 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2010-Aug-23 23:52:16 LOG1 fixed_driftmap: New position: year = 2010.6461180824904 RA = 21:34:02.6 RA/Dec = 21:34:34.0 +23:31:57.8 2010-Aug-23 23:52:16 NOTE fixed_driftmap: Correcting ZA to 5:10:44.0 ... 2010-Aug-23 23:52:16 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1789027308 -CF 2010-Aug-23 23:52:16 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-23 23:52:16 START begin_task: Starting task 'WAPP calibration' 2010-Aug-23 23:52:16 LOG5 begin_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2010-Aug-23 23:52:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-23 23:52:16 START begin_task: Starting task 'selecting calibration type' 2010-Aug-23 23:52:16 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2010-Aug-23 23:52:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-23 23:52:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-23 23:52:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:52:16 START begin_task: Starting task 'waiting on setcal' 2010-Aug-23 23:52:16 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-Aug-23 23:52:16 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1789027308 -CF 2010-Aug-23 23:52:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:52:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-23 23:52:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-23 23:52:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:52:16 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-23 23:52:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-23 23:52:17 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-Aug-23 23:52:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-23 23:52:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-23 23:52:17 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-23 23:52:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-23 23:52:17 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2010-Aug-23 23:52:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-23 23:52:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-23 23:52:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-23 23:52:17 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2010-Aug-23 23:52:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-23 23:52:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-23 23:52:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-23 23:52:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-23 23:52:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-23 23:52:17 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-Aug-23 23:52:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-23 23:52:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-23 23:52:17 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-Aug-23 23:52:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-23 23:52:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-23 23:52:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-23 23:52:17 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2010-Aug-23 23:52:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-23 23:52:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-23 23:52:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-23 23:52:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-23 23:52:17 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2010-Aug-23 23:52:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-23 23:52:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-23 23:52:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-23 23:52:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-23 23:52:17 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2010-Aug-23 23:52:17 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-23 23:52:17 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-23 23:52:17 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Aug-23 23:52:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-23 23:52:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-23 23:52:17 INFO2 take_data: Starting WAPP 1-second scan: 23500149 2010-Aug-23 23:52:18 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-23 23:52:18 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-Aug-23 23:52:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:52:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-23 23:52:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13939.00 2010-Aug-23 23:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:52:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:52:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-23 23:52:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-23 23:52:20 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-Aug-23 23:52:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-23 23:52:20 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Aug-23 23:52:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-23 23:52:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-23 23:52:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-23 23:52:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-23 23:52:20 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2010-Aug-23 23:52:20 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-23 23:52:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-23 23:52:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-23 23:52:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-23 23:52:20 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2010-Aug-23 23:52:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-23 23:52:20 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-23 23:52:20 LOG5 finish_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2010-Aug-23 23:52:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-23 23:52:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-23 23:52:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-23 23:52:20 LOG5 end_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2010-Aug-23 23:52:20 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2010-Aug-23 23:52:20 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Aug-23 23:52:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:52:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:52:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:52:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-23 23:52:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-23 23:52:21 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-23 23:52:21 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-23 23:52:21 LOG5 begin_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2010-Aug-23 23:52:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-23 23:52:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-23 23:52:21 INFO2 take_data: Starting WAPP 600-second scan: 23500150 2010-Aug-23 23:52:21 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-23 23:52:21 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Aug-23 23:52:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-23 23:52:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-23 23:52:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-23 23:52:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13942.00 2010-Aug-23 23:52:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20100823.a2010.0035.fits 2010-Aug-23 23:52:21 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100823.a2010.0035.fits} 2010-Aug-23 23:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-23 23:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-23 23:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-23 23:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-23 23:52:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-23 23:58:57 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 23:58:57.300 (seconds: 86337.300)!} 2010-Aug-23 23:58:57 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 23:58:57.300 (seconds: 86337.300)! 2010-Aug-23 23:58:58 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 86336.0 to 86337.0! 2010-Aug-23 23:58:59 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (86336.0 - 86338.0)! 2010-Aug-24 00:02:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 00:02:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 00:02:22 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Aug-24 00:02:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 00:02:22 LOG5 end_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2010-Aug-24 00:02:22 LOG1 fixed_driftmap: New position: year = 2010.6461372854717 RA = 21:44:10.1 RA/Dec = 21:44:41.7 +23:32:03.1 2010-Aug-24 00:02:22 NOTE fixed_driftmap: Correcting ZA to 5:10:49.4 ... 2010-Aug-24 00:02:22 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1803885600 -CF 2010-Aug-24 00:02:22 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 00:02:22 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 00:02:22 LOG5 begin_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2010-Aug-24 00:02:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 00:02:22 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 00:02:22 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2010-Aug-24 00:02:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 00:02:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 00:02:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 00:02:22 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 00:02:22 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2010-Aug-24 00:02:22 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1803885600 -CF 2010-Aug-24 00:02:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:02:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 00:02:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 00:02:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:02:22 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 00:02:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 00:02:22 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2010-Aug-24 00:02:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 00:02:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 00:02:22 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 00:02:22 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 00:02:22 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2010-Aug-24 00:02:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:02:23 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 00:02:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 00:02:23 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2010-Aug-24 00:02:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 00:02:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 00:02:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 00:02:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 00:02:23 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 00:02:23 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2010-Aug-24 00:02:23 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 00:02:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 00:02:23 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2010-Aug-24 00:02:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 00:02:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 00:02:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 00:02:23 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2010-Aug-24 00:02:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 00:02:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 00:02:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 00:02:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 00:02:23 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2010-Aug-24 00:02:23 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 00:02:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 00:02:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 00:02:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 00:02:23 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2010-Aug-24 00:02:23 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 00:02:23 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 00:02:23 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2010-Aug-24 00:02:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 00:02:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 00:02:23 INFO2 take_data: Starting WAPP 1-second scan: 23600001 2010-Aug-24 00:02:23 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 00:02:23 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-Aug-24 00:02:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 00:02:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 00:02:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14544.00 2010-Aug-24 00:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 00:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:02:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:02:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 00:02:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 00:02:25 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-Aug-24 00:02:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 00:02:25 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2010-Aug-24 00:02:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 00:02:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 00:02:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 00:02:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 00:02:25 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2010-Aug-24 00:02:25 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 00:02:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 00:02:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 00:02:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 00:02:25 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2010-Aug-24 00:02:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 00:02:25 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 00:02:25 LOG5 finish_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2010-Aug-24 00:02:25 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 00:02:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 00:02:25 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 00:02:25 LOG5 end_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2010-Aug-24 00:02:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2010-Aug-24 00:02:25 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2010-Aug-24 00:02:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:02:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:02:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:02:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:02:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 00:02:26 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 00:02:26 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 00:02:26 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2010-Aug-24 00:02:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 00:02:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 00:02:26 INFO2 take_data: Starting WAPP 600-second scan: 23600002 2010-Aug-24 00:02:26 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 00:02:26 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-Aug-24 00:02:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 00:02:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 00:02:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 00:02:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14547.00 2010-Aug-24 00:02:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0000.fits 2010-Aug-24 00:02:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0000.fits} 2010-Aug-24 00:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 00:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:02:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:12:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 00:12:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 00:12:27 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-Aug-24 00:12:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 00:12:27 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2010-Aug-24 00:12:27 LOG1 fixed_driftmap: New position: year = 2010.6461564567649 RA = 21:54:16.5 RA/Dec = 21:54:48.3 +23:32:08.1 2010-Aug-24 00:12:27 NOTE fixed_driftmap: Correcting ZA to 5:10:54.4 ... 2010-Aug-24 00:12:27 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1817731996 -CF 2010-Aug-24 00:12:27 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 00:12:27 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 00:12:27 LOG5 begin_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2010-Aug-24 00:12:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 00:12:27 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 00:12:27 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2010-Aug-24 00:12:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 00:12:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 00:12:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 00:12:27 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 00:12:27 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2010-Aug-24 00:12:27 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1817731996 -CF 2010-Aug-24 00:12:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:12:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 00:12:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 00:12:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:12:27 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 00:12:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 00:12:27 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2010-Aug-24 00:12:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 00:12:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 00:12:27 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 00:12:27 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 00:12:27 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-Aug-24 00:12:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:12:28 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 00:12:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 00:12:28 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-Aug-24 00:12:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 00:12:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 00:12:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 00:12:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 00:12:28 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 00:12:28 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2010-Aug-24 00:12:28 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 00:12:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 00:12:28 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2010-Aug-24 00:12:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 00:12:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 00:12:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 00:12:28 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2010-Aug-24 00:12:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 00:12:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 00:12:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 00:12:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 00:12:28 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2010-Aug-24 00:12:28 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 00:12:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 00:12:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 00:12:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 00:12:28 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2010-Aug-24 00:12:28 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 00:12:28 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 00:12:28 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Aug-24 00:12:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 00:12:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 00:12:28 INFO2 take_data: Starting WAPP 1-second scan: 23600003 2010-Aug-24 00:12:28 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 00:12:28 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-Aug-24 00:12:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 00:12:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 00:12:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15149.00 2010-Aug-24 00:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 00:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:12:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:12:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 00:12:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 00:12:30 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-Aug-24 00:12:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 00:12:30 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Aug-24 00:12:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 00:12:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 00:12:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 00:12:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 00:12:30 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-Aug-24 00:12:30 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 00:12:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 00:12:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 00:12:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 00:12:30 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-Aug-24 00:12:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 00:12:30 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 00:12:30 LOG5 finish_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2010-Aug-24 00:12:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 00:12:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 00:12:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 00:12:30 LOG5 end_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2010-Aug-24 00:12:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2010-Aug-24 00:12:30 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2010-Aug-24 00:12:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:12:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:12:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:12:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:12:31 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 00:12:31 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 00:12:31 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 00:12:31 LOG5 begin_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2010-Aug-24 00:12:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 00:12:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 00:12:31 INFO2 take_data: Starting WAPP 600-second scan: 23600004 2010-Aug-24 00:12:31 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 00:12:31 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-Aug-24 00:12:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 00:12:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 00:12:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 00:12:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15152.00 2010-Aug-24 00:12:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0001.fits 2010-Aug-24 00:12:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0001.fits} 2010-Aug-24 00:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 00:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:12:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:22:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 00:22:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 00:22:32 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-Aug-24 00:22:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 00:22:32 LOG5 end_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2010-Aug-24 00:22:32 LOG1 fixed_driftmap: New position: year = 2010.646175628058 RA = 22:04:22.9 RA/Dec = 22:04:55.0 +23:32:12.7 2010-Aug-24 00:22:32 NOTE fixed_driftmap: Correcting ZA to 5:10:59.0 ... 2010-Aug-24 00:22:32 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1830565095 -CF 2010-Aug-24 00:22:32 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 00:22:32 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 00:22:32 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2010-Aug-24 00:22:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 00:22:32 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 00:22:32 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2010-Aug-24 00:22:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 00:22:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 00:22:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 00:22:32 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 00:22:32 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2010-Aug-24 00:22:32 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1830565095 -CF 2010-Aug-24 00:22:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:22:32 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 00:22:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 00:22:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:22:32 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 00:22:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 00:22:32 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2010-Aug-24 00:22:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 00:22:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 00:22:32 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 00:22:32 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 00:22:32 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-Aug-24 00:22:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:22:33 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 00:22:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 00:22:33 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-Aug-24 00:22:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 00:22:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 00:22:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 00:22:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 00:22:33 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 00:22:33 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-Aug-24 00:22:33 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 00:22:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 00:22:33 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-Aug-24 00:22:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 00:22:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 00:22:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 00:22:33 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2010-Aug-24 00:22:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 00:22:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 00:22:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 00:22:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 00:22:33 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2010-Aug-24 00:22:33 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 00:22:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 00:22:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 00:22:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 00:22:33 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2010-Aug-24 00:22:33 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 00:22:33 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 00:22:33 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Aug-24 00:22:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 00:22:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 00:22:33 INFO2 take_data: Starting WAPP 1-second scan: 23600005 2010-Aug-24 00:22:33 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 00:22:33 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Aug-24 00:22:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 00:22:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 00:22:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15754.00 2010-Aug-24 00:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 00:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:22:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 00:22:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 00:22:35 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Aug-24 00:22:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 00:22:35 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Aug-24 00:22:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 00:22:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 00:22:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 00:22:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 00:22:35 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-Aug-24 00:22:35 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 00:22:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 00:22:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 00:22:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 00:22:35 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-Aug-24 00:22:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 00:22:35 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 00:22:35 LOG5 finish_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2010-Aug-24 00:22:35 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 00:22:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 00:22:35 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 00:22:35 LOG5 end_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2010-Aug-24 00:22:35 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2010-Aug-24 00:22:35 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2010-Aug-24 00:22:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:22:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:22:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:22:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:22:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 00:22:36 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 00:22:36 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 00:22:36 LOG5 begin_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2010-Aug-24 00:22:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 00:22:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 00:22:36 INFO2 take_data: Starting WAPP 600-second scan: 23600006 2010-Aug-24 00:22:36 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 00:22:36 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Aug-24 00:22:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 00:22:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 00:22:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 00:22:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15757.00 2010-Aug-24 00:22:36 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0002.fits 2010-Aug-24 00:22:36 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0002.fits} 2010-Aug-24 00:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 00:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:22:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:28:55 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 00:28:55.324 (seconds: 1735.324)!} 2010-Aug-24 00:28:55 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 00:28:55.324 (seconds: 1735.324)! 2010-Aug-24 00:28:56 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 1734.0 to 1735.0! 2010-Aug-24 00:28:57 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (1734.0 - 1736.0)! 2010-Aug-24 00:32:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 00:32:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 00:32:37 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Aug-24 00:32:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 00:32:37 LOG5 end_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2010-Aug-24 00:32:37 LOG1 fixed_driftmap: New position: year = 2010.6461947993512 RA = 22:14:29.3 RA/Dec = 22:15:01.6 +23:32:17.0 2010-Aug-24 00:32:37 NOTE fixed_driftmap: Correcting ZA to 5:11:03.2 ... 2010-Aug-24 00:32:37 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1842359851 -CF 2010-Aug-24 00:32:37 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 00:32:37 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 00:32:37 LOG5 begin_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2010-Aug-24 00:32:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 00:32:37 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 00:32:37 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2010-Aug-24 00:32:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 00:32:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 00:32:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 00:32:37 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 00:32:37 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-Aug-24 00:32:37 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1842359851 -CF 2010-Aug-24 00:32:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:32:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 00:32:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 00:32:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:32:37 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 00:32:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 00:32:37 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-Aug-24 00:32:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 00:32:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 00:32:37 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 00:32:37 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 00:32:37 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2010-Aug-24 00:32:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:32:38 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 00:32:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 00:32:38 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2010-Aug-24 00:32:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 00:32:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 00:32:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 00:32:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 00:32:38 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 00:32:38 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2010-Aug-24 00:32:38 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 00:32:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 00:32:38 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2010-Aug-24 00:32:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 00:32:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 00:32:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 00:32:38 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2010-Aug-24 00:32:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 00:32:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 00:32:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 00:32:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 00:32:38 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2010-Aug-24 00:32:38 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 00:32:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 00:32:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 00:32:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 00:32:38 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2010-Aug-24 00:32:38 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 00:32:38 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 00:32:38 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Aug-24 00:32:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 00:32:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 00:32:38 INFO2 take_data: Starting WAPP 1-second scan: 23600007 2010-Aug-24 00:32:38 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 00:32:38 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-Aug-24 00:32:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 00:32:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 00:32:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16359.00 2010-Aug-24 00:32:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 00:32:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:32:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:32:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:32:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:32:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:32:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:32:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:32:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:32:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 00:32:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 00:32:40 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-Aug-24 00:32:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 00:32:40 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Aug-24 00:32:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 00:32:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 00:32:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 00:32:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 00:32:40 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2010-Aug-24 00:32:40 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 00:32:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 00:32:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 00:32:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 00:32:40 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2010-Aug-24 00:32:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 00:32:40 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 00:32:40 LOG5 finish_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2010-Aug-24 00:32:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 00:32:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 00:32:40 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 00:32:40 LOG5 end_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2010-Aug-24 00:32:40 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2010-Aug-24 00:32:40 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2010-Aug-24 00:32:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:32:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:32:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:32:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:32:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 00:32:41 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 00:32:41 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 00:32:41 LOG5 begin_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2010-Aug-24 00:32:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 00:32:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 00:32:41 INFO2 take_data: Starting WAPP 600-second scan: 23600008 2010-Aug-24 00:32:41 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 00:32:41 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Aug-24 00:32:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 00:32:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 00:32:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 00:32:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16362.00 2010-Aug-24 00:32:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0003.fits 2010-Aug-24 00:32:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0003.fits} 2010-Aug-24 00:32:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 00:32:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:32:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:32:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:32:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:32:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:32:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:32:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:32:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:42:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 00:42:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 00:42:42 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Aug-24 00:42:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 00:42:42 LOG5 end_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2010-Aug-24 00:42:42 LOG1 fixed_driftmap: New position: year = 2010.6462139706443 RA = 22:24:35.7 RA/Dec = 22:25:08.3 +23:32:20.8 2010-Aug-24 00:42:42 NOTE fixed_driftmap: Correcting ZA to 5:11:07.1 ... 2010-Aug-24 00:42:42 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1853093262 -CF 2010-Aug-24 00:42:42 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 00:42:42 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 00:42:42 LOG5 begin_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2010-Aug-24 00:42:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 00:42:42 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 00:42:42 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2010-Aug-24 00:42:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 00:42:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 00:42:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 00:42:42 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 00:42:42 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2010-Aug-24 00:42:42 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1853093262 -CF 2010-Aug-24 00:42:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:42:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 00:42:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 00:42:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:42:42 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 00:42:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 00:42:42 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2010-Aug-24 00:42:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 00:42:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 00:42:43 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 00:42:43 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 00:42:43 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2010-Aug-24 00:42:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:42:43 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 00:42:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 00:42:43 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2010-Aug-24 00:42:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 00:42:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 00:42:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 00:42:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 00:42:43 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 00:42:43 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2010-Aug-24 00:42:43 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 00:42:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 00:42:43 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2010-Aug-24 00:42:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 00:42:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 00:42:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 00:42:43 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2010-Aug-24 00:42:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 00:42:43 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 00:42:43 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 00:42:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 00:42:43 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2010-Aug-24 00:42:43 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 00:42:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 00:42:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 00:42:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 00:42:43 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2010-Aug-24 00:42:43 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 00:42:43 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 00:42:43 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Aug-24 00:42:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 00:42:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 00:42:43 INFO2 take_data: Starting WAPP 1-second scan: 23600009 2010-Aug-24 00:42:43 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 00:42:43 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2010-Aug-24 00:42:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 00:42:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 00:42:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16964.00 2010-Aug-24 00:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 00:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:42:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:42:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 00:42:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 00:42:45 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2010-Aug-24 00:42:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 00:42:45 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Aug-24 00:42:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 00:42:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 00:42:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 00:42:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 00:42:45 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-Aug-24 00:42:45 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 00:42:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 00:42:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 00:42:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 00:42:45 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-Aug-24 00:42:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 00:42:45 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 00:42:45 LOG5 finish_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2010-Aug-24 00:42:45 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 00:42:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 00:42:45 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 00:42:45 LOG5 end_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2010-Aug-24 00:42:45 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2010-Aug-24 00:42:45 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2010-Aug-24 00:42:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:42:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:42:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:42:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:42:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 00:42:46 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 00:42:46 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 00:42:46 LOG5 begin_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2010-Aug-24 00:42:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 00:42:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 00:42:46 INFO2 take_data: Starting WAPP 600-second scan: 23600010 2010-Aug-24 00:42:46 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 00:42:46 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2010-Aug-24 00:42:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 00:42:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 00:42:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 00:42:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16967.00 2010-Aug-24 00:42:46 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0004.fits 2010-Aug-24 00:42:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0004.fits} 2010-Aug-24 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:42:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:52:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 00:52:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 00:52:47 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2010-Aug-24 00:52:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 00:52:47 LOG5 end_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2010-Aug-24 00:52:47 LOG1 fixed_driftmap: New position: year = 2010.6462331419373 RA = 22:34:42.1 RA/Dec = 22:35:14.9 +23:32:24.3 2010-Aug-24 00:52:47 NOTE fixed_driftmap: Correcting ZA to 5:11:10.6 ... 2010-Aug-24 00:52:47 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1862744638 -CF 2010-Aug-24 00:52:47 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 00:52:47 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 00:52:47 LOG5 begin_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2010-Aug-24 00:52:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 00:52:47 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 00:52:47 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2010-Aug-24 00:52:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 00:52:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 00:52:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 00:52:47 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 00:52:47 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2010-Aug-24 00:52:47 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1862744638 -CF 2010-Aug-24 00:52:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:52:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 00:52:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 00:52:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:52:47 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 00:52:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 00:52:47 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2010-Aug-24 00:52:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 00:52:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 00:52:47 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 00:52:47 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 00:52:47 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2010-Aug-24 00:52:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 00:52:48 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 00:52:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 00:52:48 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2010-Aug-24 00:52:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 00:52:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 00:52:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 00:52:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 00:52:48 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 00:52:48 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2010-Aug-24 00:52:48 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 00:52:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 00:52:48 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2010-Aug-24 00:52:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 00:52:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 00:52:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 00:52:48 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2010-Aug-24 00:52:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 00:52:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 00:52:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 00:52:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 00:52:48 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2010-Aug-24 00:52:48 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 00:52:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 00:52:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 00:52:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 00:52:48 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2010-Aug-24 00:52:48 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 00:52:48 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 00:52:48 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Aug-24 00:52:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 00:52:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 00:52:48 INFO2 take_data: Starting WAPP 1-second scan: 23600011 2010-Aug-24 00:52:48 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 00:52:48 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2010-Aug-24 00:52:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 00:52:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 00:52:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17569.00 2010-Aug-24 00:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 00:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:52:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 00:52:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 00:52:50 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2010-Aug-24 00:52:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 00:52:50 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Aug-24 00:52:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 00:52:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 00:52:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 00:52:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 00:52:50 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2010-Aug-24 00:52:50 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 00:52:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 00:52:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 00:52:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 00:52:50 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2010-Aug-24 00:52:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 00:52:50 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 00:52:50 LOG5 finish_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2010-Aug-24 00:52:50 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 00:52:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 00:52:50 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 00:52:50 LOG5 end_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2010-Aug-24 00:52:50 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2010-Aug-24 00:52:50 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2010-Aug-24 00:52:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:52:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:52:50 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:52:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 00:52:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 00:52:51 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 00:52:51 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 00:52:51 LOG5 begin_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2010-Aug-24 00:52:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 00:52:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 00:52:51 INFO2 take_data: Starting WAPP 600-second scan: 23600012 2010-Aug-24 00:52:51 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 00:52:51 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Aug-24 00:52:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 00:52:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 00:52:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 00:52:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17572.00 2010-Aug-24 00:52:51 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0005.fits 2010-Aug-24 00:52:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0005.fits} 2010-Aug-24 00:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 00:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 00:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 00:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 00:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 00:52:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:02:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 01:02:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 01:02:52 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Aug-24 01:02:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 01:02:52 LOG5 end_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2010-Aug-24 01:02:52 LOG1 fixed_driftmap: New position: year = 2010.6462523132304 RA = 22:44:48.5 RA/Dec = 22:45:21.6 +23:32:27.4 2010-Aug-24 01:02:52 NOTE fixed_driftmap: Correcting ZA to 5:11:13.7 ... 2010-Aug-24 01:02:52 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1871295030 -CF 2010-Aug-24 01:02:52 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 01:02:52 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 01:02:52 LOG5 begin_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2010-Aug-24 01:02:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 01:02:52 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 01:02:52 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2010-Aug-24 01:02:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 01:02:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 01:02:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 01:02:52 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 01:02:52 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2010-Aug-24 01:02:52 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1871295030 -CF 2010-Aug-24 01:02:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:02:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 01:02:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 01:02:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:02:52 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 01:02:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 01:02:52 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2010-Aug-24 01:02:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 01:02:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 01:02:52 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 01:02:52 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 01:02:52 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2010-Aug-24 01:02:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:02:53 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 01:02:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 01:02:53 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2010-Aug-24 01:02:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 01:02:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 01:02:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 01:02:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 01:02:53 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 01:02:53 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2010-Aug-24 01:02:53 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 01:02:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 01:02:53 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2010-Aug-24 01:02:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 01:02:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 01:02:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 01:02:53 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2010-Aug-24 01:02:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 01:02:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 01:02:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 01:02:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 01:02:53 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2010-Aug-24 01:02:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 01:02:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 01:02:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 01:02:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 01:02:53 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2010-Aug-24 01:02:53 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 01:02:53 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 01:02:53 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-Aug-24 01:02:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 01:02:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 01:02:53 INFO2 take_data: Starting WAPP 1-second scan: 23600013 2010-Aug-24 01:02:53 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 01:02:53 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2010-Aug-24 01:02:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 01:02:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 01:02:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18174.00 2010-Aug-24 01:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 01:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:02:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:02:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 01:02:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 01:02:55 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2010-Aug-24 01:02:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 01:02:55 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-Aug-24 01:02:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 01:02:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 01:02:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 01:02:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 01:02:55 LOG5 begin_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2010-Aug-24 01:02:55 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 01:02:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 01:02:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 01:02:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 01:02:55 LOG5 end_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2010-Aug-24 01:02:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 01:02:55 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 01:02:55 LOG5 finish_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2010-Aug-24 01:02:55 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 01:02:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 01:02:55 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 01:02:55 LOG5 end_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2010-Aug-24 01:02:55 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2010-Aug-24 01:02:55 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2010-Aug-24 01:02:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:02:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:02:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:02:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:02:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 01:02:56 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 01:02:56 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 01:02:56 LOG5 begin_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2010-Aug-24 01:02:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 01:02:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 01:02:56 INFO2 take_data: Starting WAPP 600-second scan: 23600014 2010-Aug-24 01:02:56 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 01:02:56 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Aug-24 01:02:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 01:02:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 01:02:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 01:02:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18177.00 2010-Aug-24 01:02:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0006.fits 2010-Aug-24 01:02:56 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0006.fits} 2010-Aug-24 01:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 01:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:02:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:12:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 01:12:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 01:12:57 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Aug-24 01:12:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 01:12:57 LOG5 end_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2010-Aug-24 01:12:57 LOG1 fixed_driftmap: New position: year = 2010.6462714845236 RA = 22:54:54.9 RA/Dec = 22:55:28.3 +23:32:30.0 2010-Aug-24 01:12:57 NOTE fixed_driftmap: Correcting ZA to 5:11:16.3 ... 2010-Aug-24 01:12:57 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1878727918 -CF 2010-Aug-24 01:12:57 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 01:12:57 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 01:12:57 LOG5 begin_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2010-Aug-24 01:12:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 01:12:57 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 01:12:57 LOG5 begin_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2010-Aug-24 01:12:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 01:12:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 01:12:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 01:12:57 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 01:12:57 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2010-Aug-24 01:12:57 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1878727918 -CF 2010-Aug-24 01:12:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:12:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 01:12:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 01:12:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:12:57 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 01:12:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 01:12:57 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2010-Aug-24 01:12:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 01:12:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 01:12:57 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 01:12:57 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 01:12:57 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2010-Aug-24 01:12:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:12:58 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 01:12:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 01:12:58 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2010-Aug-24 01:12:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 01:12:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 01:12:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 01:12:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 01:12:58 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 01:12:58 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2010-Aug-24 01:12:58 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 01:12:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 01:12:58 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2010-Aug-24 01:12:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 01:12:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 01:12:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 01:12:58 LOG5 end_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2010-Aug-24 01:12:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 01:12:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 01:12:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 01:12:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 01:12:58 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2010-Aug-24 01:12:58 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 01:12:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 01:12:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 01:12:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 01:12:58 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2010-Aug-24 01:12:58 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 01:12:58 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 01:12:58 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Aug-24 01:12:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 01:12:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 01:12:58 INFO2 take_data: Starting WAPP 1-second scan: 23600015 2010-Aug-24 01:12:58 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 01:12:58 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2010-Aug-24 01:12:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 01:12:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 01:12:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18779.00 2010-Aug-24 01:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 01:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:13:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:13:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 01:13:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 01:13:00 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2010-Aug-24 01:13:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 01:13:00 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Aug-24 01:13:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 01:13:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 01:13:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 01:13:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 01:13:00 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2010-Aug-24 01:13:00 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 01:13:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 01:13:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 01:13:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 01:13:00 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2010-Aug-24 01:13:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 01:13:00 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 01:13:00 LOG5 finish_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2010-Aug-24 01:13:00 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 01:13:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 01:13:00 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 01:13:00 LOG5 end_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2010-Aug-24 01:13:00 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2010-Aug-24 01:13:00 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2010-Aug-24 01:13:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:13:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:13:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:13:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:13:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 01:13:01 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 01:13:01 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 01:13:01 LOG5 begin_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2010-Aug-24 01:13:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 01:13:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 01:13:01 INFO2 take_data: Starting WAPP 600-second scan: 23600016 2010-Aug-24 01:13:01 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 01:13:01 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Aug-24 01:13:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 01:13:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 01:13:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 01:13:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18782.00 2010-Aug-24 01:13:01 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0007.fits 2010-Aug-24 01:13:01 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0007.fits} 2010-Aug-24 01:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 01:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:13:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:23:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 01:23:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 01:23:02 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Aug-24 01:23:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 01:23:02 LOG5 end_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2010-Aug-24 01:23:02 LOG1 fixed_driftmap: New position: year = 2010.6462906558168 RA = 23:05:01.3 RA/Dec = 23:05:34.9 +23:32:32.3 2010-Aug-24 01:23:02 NOTE fixed_driftmap: Correcting ZA to 5:11:18.6 ... 2010-Aug-24 01:23:02 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1885028835 -CF 2010-Aug-24 01:23:02 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 01:23:02 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 01:23:02 LOG5 begin_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2010-Aug-24 01:23:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 01:23:02 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 01:23:02 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2010-Aug-24 01:23:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 01:23:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 01:23:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 01:23:02 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 01:23:02 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2010-Aug-24 01:23:02 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1885028835 -CF 2010-Aug-24 01:23:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:23:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 01:23:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 01:23:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:23:02 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 01:23:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 01:23:02 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2010-Aug-24 01:23:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 01:23:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 01:23:02 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 01:23:02 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 01:23:02 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2010-Aug-24 01:23:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:23:03 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 01:23:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 01:23:03 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2010-Aug-24 01:23:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 01:23:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 01:23:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 01:23:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 01:23:03 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 01:23:03 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2010-Aug-24 01:23:03 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 01:23:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 01:23:03 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2010-Aug-24 01:23:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 01:23:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 01:23:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 01:23:03 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2010-Aug-24 01:23:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 01:23:03 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 01:23:03 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 01:23:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 01:23:03 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2010-Aug-24 01:23:03 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 01:23:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 01:23:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 01:23:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 01:23:03 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2010-Aug-24 01:23:03 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 01:23:03 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 01:23:03 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Aug-24 01:23:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 01:23:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 01:23:03 INFO2 take_data: Starting WAPP 1-second scan: 23600017 2010-Aug-24 01:23:03 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 01:23:03 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2010-Aug-24 01:23:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 01:23:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 01:23:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19384.00 2010-Aug-24 01:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 01:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:23:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:23:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 01:23:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 01:23:05 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2010-Aug-24 01:23:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 01:23:05 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Aug-24 01:23:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 01:23:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 01:23:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 01:23:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 01:23:05 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2010-Aug-24 01:23:06 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 01:23:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 01:23:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 01:23:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 01:23:06 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2010-Aug-24 01:23:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 01:23:06 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 01:23:06 LOG5 finish_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2010-Aug-24 01:23:06 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 01:23:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 01:23:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 01:23:06 LOG5 end_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2010-Aug-24 01:23:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2010-Aug-24 01:23:06 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2010-Aug-24 01:23:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:23:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:23:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:23:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:23:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 01:23:06 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 01:23:06 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 01:23:06 LOG5 begin_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2010-Aug-24 01:23:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 01:23:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 01:23:06 INFO2 take_data: Starting WAPP 600-second scan: 23600018 2010-Aug-24 01:23:06 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 01:23:06 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2010-Aug-24 01:23:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 01:23:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 01:23:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 01:23:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19387.00 2010-Aug-24 01:23:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0008.fits 2010-Aug-24 01:23:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0008.fits} 2010-Aug-24 01:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 01:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:23:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:33:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 01:33:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 01:33:07 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2010-Aug-24 01:33:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 01:33:07 LOG5 end_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2010-Aug-24 01:33:07 LOG1 fixed_driftmap: New position: year = 2010.6463098271099 RA = 23:15:07.7 RA/Dec = 23:15:41.6 +23:32:34.2 2010-Aug-24 01:33:07 NOTE fixed_driftmap: Correcting ZA to 5:11:20.5 ... 2010-Aug-24 01:33:07 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1890185519 -CF 2010-Aug-24 01:33:07 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 01:33:07 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 01:33:07 LOG5 begin_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2010-Aug-24 01:33:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 01:33:07 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 01:33:07 LOG5 begin_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2010-Aug-24 01:33:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 01:33:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 01:33:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 01:33:07 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 01:33:07 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2010-Aug-24 01:33:07 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1890185519 -CF 2010-Aug-24 01:33:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:33:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 01:33:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 01:33:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:33:08 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 01:33:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 01:33:08 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2010-Aug-24 01:33:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 01:33:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 01:33:08 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 01:33:08 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 01:33:08 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2010-Aug-24 01:33:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:33:08 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 01:33:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 01:33:08 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2010-Aug-24 01:33:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 01:33:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 01:33:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 01:33:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 01:33:08 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 01:33:08 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2010-Aug-24 01:33:08 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 01:33:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 01:33:08 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2010-Aug-24 01:33:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 01:33:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 01:33:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 01:33:08 LOG5 end_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2010-Aug-24 01:33:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 01:33:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 01:33:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 01:33:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 01:33:08 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2010-Aug-24 01:33:08 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 01:33:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 01:33:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 01:33:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 01:33:08 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2010-Aug-24 01:33:08 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 01:33:08 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 01:33:08 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2010-Aug-24 01:33:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 01:33:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 01:33:08 INFO2 take_data: Starting WAPP 1-second scan: 23600019 2010-Aug-24 01:33:09 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 01:33:09 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2010-Aug-24 01:33:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 01:33:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 01:33:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19990.00 2010-Aug-24 01:33:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 01:33:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:33:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:33:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:33:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:33:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:33:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:33:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:33:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:33:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 01:33:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 01:33:11 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2010-Aug-24 01:33:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 01:33:11 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2010-Aug-24 01:33:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 01:33:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 01:33:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 01:33:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 01:33:11 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2010-Aug-24 01:33:11 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 01:33:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 01:33:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 01:33:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 01:33:11 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2010-Aug-24 01:33:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 01:33:11 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 01:33:11 LOG5 finish_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2010-Aug-24 01:33:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 01:33:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 01:33:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 01:33:11 LOG5 end_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2010-Aug-24 01:33:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2010-Aug-24 01:33:12 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2010-Aug-24 01:33:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:33:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:33:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:33:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:33:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 01:33:12 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 01:33:12 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 01:33:12 LOG5 begin_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2010-Aug-24 01:33:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 01:33:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 01:33:12 INFO2 take_data: Starting WAPP 600-second scan: 23600020 2010-Aug-24 01:33:12 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 01:33:12 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2010-Aug-24 01:33:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 01:33:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 01:33:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 01:33:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19993.00 2010-Aug-24 01:33:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0009.fits 2010-Aug-24 01:33:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0009.fits} 2010-Aug-24 01:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 01:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:33:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:42:39 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 55432.237928 to 55432.237940! 2010-Aug-24 01:42:40 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (55432.237928 - 55432.237951)! 2010-Aug-24 01:43:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 01:43:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 01:43:13 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2010-Aug-24 01:43:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 01:43:13 LOG5 end_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2010-Aug-24 01:43:13 LOG1 fixed_driftmap: New position: year = 2010.646329030091 RA = 23:25:15.1 RA/Dec = 23:25:49.2 +23:32:35.6 2010-Aug-24 01:43:13 NOTE fixed_driftmap: Correcting ZA to 5:11:21.9 ... 2010-Aug-24 01:43:13 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1894193580 -CF 2010-Aug-24 01:43:13 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 01:43:13 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 01:43:13 LOG5 begin_task: Level: (2) ID = <10255> Status = 0 0 0 0 ok 2010-Aug-24 01:43:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 01:43:13 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 01:43:13 LOG5 begin_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2010-Aug-24 01:43:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 01:43:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 01:43:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 01:43:13 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 01:43:13 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2010-Aug-24 01:43:13 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1894193580 -CF 2010-Aug-24 01:43:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:43:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 01:43:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 01:43:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:43:13 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 01:43:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 01:43:13 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2010-Aug-24 01:43:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 01:43:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 01:43:13 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 01:43:13 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 01:43:13 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2010-Aug-24 01:43:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:43:14 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 01:43:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 01:43:14 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2010-Aug-24 01:43:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 01:43:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 01:43:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 01:43:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 01:43:14 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 01:43:14 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2010-Aug-24 01:43:14 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 01:43:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 01:43:14 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2010-Aug-24 01:43:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 01:43:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 01:43:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 01:43:14 LOG5 end_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2010-Aug-24 01:43:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 01:43:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 01:43:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 01:43:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 01:43:14 LOG5 begin_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2010-Aug-24 01:43:14 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 01:43:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 01:43:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 01:43:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 01:43:14 LOG5 end_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2010-Aug-24 01:43:14 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 01:43:14 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 01:43:14 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2010-Aug-24 01:43:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 01:43:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 01:43:14 INFO2 take_data: Starting WAPP 1-second scan: 23600021 2010-Aug-24 01:43:14 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 01:43:14 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2010-Aug-24 01:43:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 01:43:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 01:43:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20595.00 2010-Aug-24 01:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 01:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:43:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:43:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 01:43:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 01:43:16 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2010-Aug-24 01:43:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 01:43:16 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2010-Aug-24 01:43:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 01:43:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 01:43:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 01:43:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 01:43:16 LOG5 begin_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2010-Aug-24 01:43:16 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 01:43:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 01:43:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 01:43:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 01:43:16 LOG5 end_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2010-Aug-24 01:43:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 01:43:16 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 01:43:16 LOG5 finish_task: Level: (2) ID = <10255> Status = 0 0 0 0 ok 2010-Aug-24 01:43:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 01:43:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 01:43:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 01:43:16 LOG5 end_task: Level: (2) ID = <10255> Status = 0 0 0 0 ok 2010-Aug-24 01:43:16 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2010-Aug-24 01:43:16 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2010-Aug-24 01:43:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:43:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:43:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:43:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:43:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 01:43:17 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 01:43:17 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 01:43:17 LOG5 begin_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2010-Aug-24 01:43:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 01:43:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 01:43:17 INFO2 take_data: Starting WAPP 600-second scan: 23600022 2010-Aug-24 01:43:17 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 01:43:17 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2010-Aug-24 01:43:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 01:43:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 01:43:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 01:43:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20598.00 2010-Aug-24 01:43:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0010.fits 2010-Aug-24 01:43:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0010.fits} 2010-Aug-24 01:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 01:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:43:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:53:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 01:53:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 01:53:18 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2010-Aug-24 01:53:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 01:53:18 LOG5 end_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2010-Aug-24 01:53:18 LOG1 fixed_driftmap: New position: year = 2010.6463482013842 RA = 23:35:21.5 RA/Dec = 23:35:55.9 +23:32:36.6 2010-Aug-24 01:53:18 NOTE fixed_driftmap: Correcting ZA to 5:11:22.9 ... 2010-Aug-24 01:53:18 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1897032014 -CF 2010-Aug-24 01:53:18 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 01:53:18 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 01:53:18 LOG5 begin_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2010-Aug-24 01:53:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 01:53:18 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 01:53:18 LOG5 begin_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2010-Aug-24 01:53:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 01:53:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 01:53:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 01:53:18 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 01:53:18 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2010-Aug-24 01:53:18 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1897032014 -CF 2010-Aug-24 01:53:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:53:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 01:53:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 01:53:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:53:18 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 01:53:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 01:53:18 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2010-Aug-24 01:53:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 01:53:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 01:53:18 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 01:53:18 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 01:53:18 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2010-Aug-24 01:53:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 01:53:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 01:53:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 01:53:19 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2010-Aug-24 01:53:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 01:53:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 01:53:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 01:53:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 01:53:19 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 01:53:19 LOG5 begin_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2010-Aug-24 01:53:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 01:53:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 01:53:19 LOG5 end_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2010-Aug-24 01:53:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 01:53:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 01:53:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 01:53:19 LOG5 end_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2010-Aug-24 01:53:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 01:53:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 01:53:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 01:53:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 01:53:19 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2010-Aug-24 01:53:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 01:53:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 01:53:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 01:53:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 01:53:19 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2010-Aug-24 01:53:19 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 01:53:19 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 01:53:19 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2010-Aug-24 01:53:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 01:53:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 01:53:19 INFO2 take_data: Starting WAPP 1-second scan: 23600023 2010-Aug-24 01:53:19 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 01:53:19 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2010-Aug-24 01:53:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 01:53:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 01:53:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21200.00 2010-Aug-24 01:53:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 01:53:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:53:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:53:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:53:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:53:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:53:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:53:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:53:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:53:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 01:53:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 01:53:21 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2010-Aug-24 01:53:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 01:53:21 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2010-Aug-24 01:53:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 01:53:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 01:53:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 01:53:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 01:53:21 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2010-Aug-24 01:53:21 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 01:53:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 01:53:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 01:53:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 01:53:21 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2010-Aug-24 01:53:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 01:53:21 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 01:53:21 LOG5 finish_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2010-Aug-24 01:53:21 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 01:53:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 01:53:21 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 01:53:21 LOG5 end_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2010-Aug-24 01:53:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2010-Aug-24 01:53:21 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2010-Aug-24 01:53:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:53:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:53:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:53:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 01:53:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 01:53:22 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 01:53:22 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 01:53:22 LOG5 begin_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2010-Aug-24 01:53:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 01:53:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 01:53:22 INFO2 take_data: Starting WAPP 600-second scan: 23600024 2010-Aug-24 01:53:22 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 01:53:22 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2010-Aug-24 01:53:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 01:53:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 01:53:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 01:53:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21203.00 2010-Aug-24 01:53:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0011.fits 2010-Aug-24 01:53:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0011.fits} 2010-Aug-24 01:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 01:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 01:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 01:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 01:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 01:53:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:03:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 02:03:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 02:03:23 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2010-Aug-24 02:03:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 02:03:23 LOG5 end_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2010-Aug-24 02:03:23 LOG1 fixed_driftmap: New position: year = 2010.6463673726773 RA = 23:45:27.9 RA/Dec = 23:46:02.6 +23:32:37.2 2010-Aug-24 02:03:23 NOTE fixed_driftmap: Correcting ZA to 5:11:23.5 ... 2010-Aug-24 02:03:23 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1898702865 -CF 2010-Aug-24 02:03:23 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 02:03:23 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 02:03:23 LOG5 begin_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2010-Aug-24 02:03:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 02:03:23 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 02:03:23 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2010-Aug-24 02:03:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 02:03:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 02:03:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 02:03:23 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 02:03:23 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2010-Aug-24 02:03:23 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1898702865 -CF 2010-Aug-24 02:03:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:03:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 02:03:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 02:03:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:03:23 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 02:03:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 02:03:23 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2010-Aug-24 02:03:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 02:03:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 02:03:23 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 02:03:23 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 02:03:23 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2010-Aug-24 02:03:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:03:24 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 02:03:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 02:03:24 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2010-Aug-24 02:03:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 02:03:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 02:03:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 02:03:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 02:03:24 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 02:03:24 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2010-Aug-24 02:03:24 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 02:03:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 02:03:24 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2010-Aug-24 02:03:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 02:03:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 02:03:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 02:03:24 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2010-Aug-24 02:03:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 02:03:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 02:03:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 02:03:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 02:03:24 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2010-Aug-24 02:03:24 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 02:03:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 02:03:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 02:03:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 02:03:24 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2010-Aug-24 02:03:24 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 02:03:24 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 02:03:24 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Aug-24 02:03:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 02:03:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 02:03:24 INFO2 take_data: Starting WAPP 1-second scan: 23600025 2010-Aug-24 02:03:24 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 02:03:24 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2010-Aug-24 02:03:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 02:03:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 02:03:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21805.00 2010-Aug-24 02:03:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 02:03:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:03:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:03:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:03:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:03:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:03:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:03:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:03:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:03:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 02:03:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 02:03:26 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2010-Aug-24 02:03:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 02:03:26 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Aug-24 02:03:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 02:03:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 02:03:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 02:03:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 02:03:26 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2010-Aug-24 02:03:26 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 02:03:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 02:03:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 02:03:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 02:03:26 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2010-Aug-24 02:03:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 02:03:26 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 02:03:26 LOG5 finish_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2010-Aug-24 02:03:26 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 02:03:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 02:03:26 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 02:03:26 LOG5 end_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2010-Aug-24 02:03:26 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2010-Aug-24 02:03:26 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2010-Aug-24 02:03:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:03:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:03:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:03:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:03:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 02:03:27 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 02:03:27 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 02:03:27 LOG5 begin_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2010-Aug-24 02:03:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 02:03:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 02:03:27 INFO2 take_data: Starting WAPP 600-second scan: 23600026 2010-Aug-24 02:03:27 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 02:03:27 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2010-Aug-24 02:03:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 02:03:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 02:03:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 02:03:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21808.00 2010-Aug-24 02:03:27 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0012.fits 2010-Aug-24 02:03:27 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0012.fits} 2010-Aug-24 02:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 02:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:03:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:13:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 02:13:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 02:13:28 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2010-Aug-24 02:13:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 02:13:28 LOG5 end_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2010-Aug-24 02:13:28 LOG1 fixed_driftmap: New position: year = 2010.6463865439705 RA = 23:55:34.3 RA/Dec = 23:56:09.2 +23:32:37.4 2010-Aug-24 02:13:28 NOTE fixed_driftmap: Correcting ZA to 5:11:23.7 ... 2010-Aug-24 02:13:28 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1899202863 -CF 2010-Aug-24 02:13:28 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 02:13:28 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 02:13:28 LOG5 begin_task: Level: (2) ID = <10288> Status = 0 0 0 0 ok 2010-Aug-24 02:13:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 02:13:28 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 02:13:28 LOG5 begin_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2010-Aug-24 02:13:28 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 02:13:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 02:13:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 02:13:28 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 02:13:28 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2010-Aug-24 02:13:28 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1899202863 -CF 2010-Aug-24 02:13:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:13:28 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 02:13:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 02:13:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:13:28 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 02:13:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 02:13:28 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2010-Aug-24 02:13:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 02:13:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 02:13:28 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 02:13:28 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 02:13:28 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2010-Aug-24 02:13:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:13:29 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 02:13:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 02:13:29 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2010-Aug-24 02:13:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 02:13:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 02:13:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 02:13:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 02:13:29 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 02:13:29 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2010-Aug-24 02:13:29 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 02:13:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 02:13:29 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2010-Aug-24 02:13:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 02:13:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 02:13:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 02:13:29 LOG5 end_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2010-Aug-24 02:13:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 02:13:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 02:13:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 02:13:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 02:13:29 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2010-Aug-24 02:13:29 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 02:13:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 02:13:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 02:13:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 02:13:29 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2010-Aug-24 02:13:29 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 02:13:29 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 02:13:29 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Aug-24 02:13:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 02:13:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 02:13:29 INFO2 take_data: Starting WAPP 1-second scan: 23600027 2010-Aug-24 02:13:29 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 02:13:29 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2010-Aug-24 02:13:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 02:13:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 02:13:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22410.00 2010-Aug-24 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:13:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:13:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 02:13:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 02:13:31 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2010-Aug-24 02:13:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 02:13:31 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Aug-24 02:13:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 02:13:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 02:13:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 02:13:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 02:13:31 LOG5 begin_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2010-Aug-24 02:13:31 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 02:13:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 02:13:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 02:13:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 02:13:31 LOG5 end_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2010-Aug-24 02:13:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 02:13:31 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 02:13:31 LOG5 finish_task: Level: (2) ID = <10288> Status = 0 0 0 0 ok 2010-Aug-24 02:13:31 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 02:13:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 02:13:31 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 02:13:31 LOG5 end_task: Level: (2) ID = <10288> Status = 0 0 0 0 ok 2010-Aug-24 02:13:31 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2010-Aug-24 02:13:31 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2010-Aug-24 02:13:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:13:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:13:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:13:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:13:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 02:13:32 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 02:13:32 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 02:13:32 LOG5 begin_task: Level: (2) ID = <10297> Status = 0 0 0 0 ok 2010-Aug-24 02:13:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 02:13:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 02:13:32 INFO2 take_data: Starting WAPP 600-second scan: 23600028 2010-Aug-24 02:13:32 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 02:13:32 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2010-Aug-24 02:13:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 02:13:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 02:13:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 02:13:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22413.00 2010-Aug-24 02:13:32 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0013.fits 2010-Aug-24 02:13:32 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0013.fits} 2010-Aug-24 02:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 02:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:13:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:23:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 02:23:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 02:23:33 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2010-Aug-24 02:23:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 02:23:33 LOG5 end_task: Level: (2) ID = <10297> Status = 0 0 0 0 ok 2010-Aug-24 02:23:33 LOG1 fixed_driftmap: New position: year = 2010.6464057152637 RA = 00:05:40.7 RA/Dec = 00:06:15.9 +23:32:37.2 2010-Aug-24 02:23:33 NOTE fixed_driftmap: Correcting ZA to 5:11:23.5 ... 2010-Aug-24 02:23:33 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1898531044 -CF 2010-Aug-24 02:23:33 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 02:23:33 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 02:23:33 LOG5 begin_task: Level: (2) ID = <10299> Status = 0 0 0 0 ok 2010-Aug-24 02:23:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 02:23:33 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 02:23:33 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2010-Aug-24 02:23:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 02:23:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 02:23:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 02:23:33 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 02:23:33 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2010-Aug-24 02:23:33 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1898531044 -CF 2010-Aug-24 02:23:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:23:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 02:23:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 02:23:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:23:33 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 02:23:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 02:23:33 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2010-Aug-24 02:23:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 02:23:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 02:23:33 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 02:23:33 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 02:23:33 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2010-Aug-24 02:23:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:23:34 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 02:23:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 02:23:34 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2010-Aug-24 02:23:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 02:23:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 02:23:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 02:23:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 02:23:34 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 02:23:34 LOG5 begin_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2010-Aug-24 02:23:34 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 02:23:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 02:23:34 LOG5 end_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2010-Aug-24 02:23:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 02:23:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 02:23:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 02:23:34 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2010-Aug-24 02:23:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 02:23:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 02:23:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 02:23:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 02:23:34 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2010-Aug-24 02:23:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 02:23:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 02:23:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 02:23:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 02:23:34 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2010-Aug-24 02:23:34 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 02:23:34 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 02:23:34 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2010-Aug-24 02:23:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 02:23:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 02:23:34 INFO2 take_data: Starting WAPP 1-second scan: 23600029 2010-Aug-24 02:23:34 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 02:23:34 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2010-Aug-24 02:23:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 02:23:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 02:23:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23015.00 2010-Aug-24 02:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 02:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:23:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:23:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 02:23:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 02:23:36 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2010-Aug-24 02:23:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 02:23:36 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2010-Aug-24 02:23:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 02:23:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 02:23:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 02:23:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 02:23:36 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2010-Aug-24 02:23:36 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 02:23:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 02:23:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 02:23:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 02:23:36 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2010-Aug-24 02:23:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 02:23:36 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 02:23:36 LOG5 finish_task: Level: (2) ID = <10299> Status = 0 0 0 0 ok 2010-Aug-24 02:23:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 02:23:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 02:23:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 02:23:36 LOG5 end_task: Level: (2) ID = <10299> Status = 0 0 0 0 ok 2010-Aug-24 02:23:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2010-Aug-24 02:23:36 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2010-Aug-24 02:23:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:23:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:23:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:23:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:23:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 02:23:37 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 02:23:37 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 02:23:37 LOG5 begin_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2010-Aug-24 02:23:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 02:23:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 02:23:37 INFO2 take_data: Starting WAPP 600-second scan: 23600030 2010-Aug-24 02:23:37 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 02:23:37 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2010-Aug-24 02:23:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 02:23:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 02:23:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 02:23:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23018.00 2010-Aug-24 02:23:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0014.fits 2010-Aug-24 02:23:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0014.fits} 2010-Aug-24 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:23:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:33:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 02:33:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 02:33:38 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2010-Aug-24 02:33:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 02:33:38 LOG5 end_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2010-Aug-24 02:33:38 LOG1 fixed_driftmap: New position: year = 2010.6464248865568 RA = 00:15:47.1 RA/Dec = 00:16:22.5 +23:32:36.5 2010-Aug-24 02:33:38 NOTE fixed_driftmap: Correcting ZA to 5:11:22.8 ... 2010-Aug-24 02:33:38 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1896688699 -CF 2010-Aug-24 02:33:38 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 02:33:38 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 02:33:38 LOG5 begin_task: Level: (2) ID = <10310> Status = 0 0 0 0 ok 2010-Aug-24 02:33:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 02:33:38 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 02:33:38 LOG5 begin_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2010-Aug-24 02:33:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 02:33:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 02:33:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 02:33:38 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 02:33:38 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2010-Aug-24 02:33:38 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1896688699 -CF 2010-Aug-24 02:33:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:33:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 02:33:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 02:33:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:33:38 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 02:33:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 02:33:38 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2010-Aug-24 02:33:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 02:33:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 02:33:38 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 02:33:38 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 02:33:38 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2010-Aug-24 02:33:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:33:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 02:33:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 02:33:39 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2010-Aug-24 02:33:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 02:33:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 02:33:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 02:33:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 02:33:39 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 02:33:39 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2010-Aug-24 02:33:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 02:33:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 02:33:39 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2010-Aug-24 02:33:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 02:33:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 02:33:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 02:33:39 LOG5 end_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2010-Aug-24 02:33:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 02:33:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 02:33:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 02:33:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 02:33:39 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2010-Aug-24 02:33:39 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 02:33:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 02:33:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 02:33:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 02:33:39 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2010-Aug-24 02:33:39 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 02:33:39 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 02:33:39 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2010-Aug-24 02:33:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 02:33:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 02:33:39 INFO2 take_data: Starting WAPP 1-second scan: 23600031 2010-Aug-24 02:33:39 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 02:33:39 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2010-Aug-24 02:33:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 02:33:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 02:33:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23620.00 2010-Aug-24 02:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 02:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:33:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:33:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 02:33:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 02:33:41 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2010-Aug-24 02:33:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 02:33:41 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2010-Aug-24 02:33:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 02:33:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 02:33:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 02:33:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 02:33:41 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2010-Aug-24 02:33:41 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 02:33:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 02:33:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 02:33:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 02:33:41 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2010-Aug-24 02:33:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 02:33:41 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 02:33:41 LOG5 finish_task: Level: (2) ID = <10310> Status = 0 0 0 0 ok 2010-Aug-24 02:33:41 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 02:33:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 02:33:41 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 02:33:41 LOG5 end_task: Level: (2) ID = <10310> Status = 0 0 0 0 ok 2010-Aug-24 02:33:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2010-Aug-24 02:33:41 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2010-Aug-24 02:33:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:33:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:33:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:33:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:33:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 02:33:42 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 02:33:42 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 02:33:42 LOG5 begin_task: Level: (2) ID = <10319> Status = 0 0 0 0 ok 2010-Aug-24 02:33:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 02:33:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 02:33:42 INFO2 take_data: Starting WAPP 600-second scan: 23600032 2010-Aug-24 02:33:42 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 02:33:42 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2010-Aug-24 02:33:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 02:33:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 02:33:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 02:33:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23623.00 2010-Aug-24 02:33:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0015.fits 2010-Aug-24 02:33:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0015.fits} 2010-Aug-24 02:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 02:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:33:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:43:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 02:43:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 02:43:43 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2010-Aug-24 02:43:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 02:43:43 LOG5 end_task: Level: (2) ID = <10319> Status = 0 0 0 0 ok 2010-Aug-24 02:43:43 LOG1 fixed_driftmap: New position: year = 2010.6464440578497 RA = 00:25:53.6 RA/Dec = 00:26:29.2 +23:32:35.4 2010-Aug-24 02:43:43 NOTE fixed_driftmap: Correcting ZA to 5:11:21.7 ... 2010-Aug-24 02:43:43 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1893679398 -CF 2010-Aug-24 02:43:43 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 02:43:43 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 02:43:43 LOG5 begin_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2010-Aug-24 02:43:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 02:43:43 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 02:43:43 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2010-Aug-24 02:43:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 02:43:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 02:43:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 02:43:43 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 02:43:43 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2010-Aug-24 02:43:43 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1893679398 -CF 2010-Aug-24 02:43:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:43:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 02:43:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 02:43:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:43:43 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 02:43:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 02:43:43 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2010-Aug-24 02:43:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 02:43:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 02:43:43 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 02:43:43 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 02:43:43 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2010-Aug-24 02:43:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:43:44 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 02:43:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 02:43:44 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2010-Aug-24 02:43:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 02:43:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 02:43:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 02:43:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 02:43:44 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 02:43:44 LOG5 begin_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2010-Aug-24 02:43:44 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 02:43:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 02:43:44 LOG5 end_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2010-Aug-24 02:43:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 02:43:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 02:43:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 02:43:44 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2010-Aug-24 02:43:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 02:43:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 02:43:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 02:43:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 02:43:44 LOG5 begin_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2010-Aug-24 02:43:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 02:43:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 02:43:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 02:43:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 02:43:44 LOG5 end_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2010-Aug-24 02:43:44 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 02:43:44 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 02:43:44 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2010-Aug-24 02:43:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 02:43:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 02:43:44 INFO2 take_data: Starting WAPP 1-second scan: 23600033 2010-Aug-24 02:43:44 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 02:43:44 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2010-Aug-24 02:43:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 02:43:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 02:43:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24225.00 2010-Aug-24 02:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 02:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:43:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:43:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 02:43:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 02:43:46 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2010-Aug-24 02:43:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 02:43:46 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2010-Aug-24 02:43:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 02:43:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 02:43:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 02:43:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 02:43:46 LOG5 begin_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2010-Aug-24 02:43:46 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 02:43:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 02:43:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 02:43:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 02:43:46 LOG5 end_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2010-Aug-24 02:43:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 02:43:46 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 02:43:46 LOG5 finish_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2010-Aug-24 02:43:46 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 02:43:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 02:43:46 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 02:43:46 LOG5 end_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2010-Aug-24 02:43:46 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2010-Aug-24 02:43:46 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2010-Aug-24 02:43:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:43:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:43:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:43:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:43:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 02:43:47 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 02:43:47 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 02:43:47 LOG5 begin_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2010-Aug-24 02:43:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 02:43:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 02:43:47 INFO2 take_data: Starting WAPP 600-second scan: 23600034 2010-Aug-24 02:43:47 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 02:43:47 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2010-Aug-24 02:43:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 02:43:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 02:43:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 02:43:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24228.00 2010-Aug-24 02:43:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0016.fits 2010-Aug-24 02:43:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0016.fits} 2010-Aug-24 02:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 02:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:43:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:46:01 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 55432.281933 to 55432.281944! 2010-Aug-24 02:46:02 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (55432.281933 - 55432.281956)! 2010-Aug-24 02:53:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 02:53:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 02:53:48 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2010-Aug-24 02:53:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 02:53:48 LOG5 end_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2010-Aug-24 02:53:48 LOG1 fixed_driftmap: New position: year = 2010.6464632291429 RA = 00:36:00.0 RA/Dec = 00:36:35.8 +23:32:33.9 2010-Aug-24 02:53:48 NOTE fixed_driftmap: Correcting ZA to 5:11:20.2 ... 2010-Aug-24 02:53:48 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1889508981 -CF 2010-Aug-24 02:53:48 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 02:53:48 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 02:53:48 LOG5 begin_task: Level: (2) ID = <10332> Status = 0 0 0 0 ok 2010-Aug-24 02:53:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 02:53:48 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 02:53:48 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2010-Aug-24 02:53:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 02:53:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 02:53:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 02:53:48 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 02:53:48 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2010-Aug-24 02:53:48 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1889508981 -CF 2010-Aug-24 02:53:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:53:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 02:53:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 02:53:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:53:48 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 02:53:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 02:53:48 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2010-Aug-24 02:53:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 02:53:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 02:53:48 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 02:53:48 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 02:53:48 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2010-Aug-24 02:53:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 02:53:49 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 02:53:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 02:53:49 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2010-Aug-24 02:53:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 02:53:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 02:53:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 02:53:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 02:53:49 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 02:53:49 LOG5 begin_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2010-Aug-24 02:53:49 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 02:53:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 02:53:49 LOG5 end_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2010-Aug-24 02:53:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 02:53:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 02:53:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 02:53:49 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2010-Aug-24 02:53:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 02:53:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 02:53:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 02:53:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 02:53:49 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2010-Aug-24 02:53:49 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 02:53:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 02:53:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 02:53:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 02:53:49 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2010-Aug-24 02:53:49 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 02:53:49 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 02:53:49 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Aug-24 02:53:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 02:53:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 02:53:49 INFO2 take_data: Starting WAPP 1-second scan: 23600035 2010-Aug-24 02:53:49 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 02:53:49 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2010-Aug-24 02:53:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 02:53:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 02:53:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24830.00 2010-Aug-24 02:53:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 02:53:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:53:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:53:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:53:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:53:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:53:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:53:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:53:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:53:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 02:53:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 02:53:51 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2010-Aug-24 02:53:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 02:53:51 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Aug-24 02:53:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-24 02:53:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-24 02:53:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-24 02:53:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 02:53:51 LOG5 begin_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2010-Aug-24 02:53:51 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 02:53:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-24 02:53:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 02:53:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 02:53:51 LOG5 end_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2010-Aug-24 02:53:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-24 02:53:51 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-24 02:53:51 LOG5 finish_task: Level: (2) ID = <10332> Status = 0 0 0 0 ok 2010-Aug-24 02:53:51 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-24 02:53:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-24 02:53:51 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-24 02:53:51 LOG5 end_task: Level: (2) ID = <10332> Status = 0 0 0 0 ok 2010-Aug-24 02:53:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 20 of 99 2010-Aug-24 02:53:51 LOG4 send_obs_status: To obs_status: <1> LOOP 20 2010-Aug-24 02:53:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:53:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:53:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:53:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Weigel, Brault 2010-Aug-24 02:53:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-24 02:53:52 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-24 02:53:52 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 02:53:52 LOG5 begin_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2010-Aug-24 02:53:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-24 02:53:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 02:53:52 INFO2 take_data: Starting WAPP 600-second scan: 23600036 2010-Aug-24 02:53:52 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 02:53:52 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2010-Aug-24 02:53:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Weigel, Brault' 2010-Aug-24 02:53:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 02:53:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-24 02:53:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24833.00 2010-Aug-24 02:53:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20100824.a2010.0017.fits 2010-Aug-24 02:53:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100824.a2010.0017.fits} 2010-Aug-24 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 02:53:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 03:03:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-24 03:03:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-24 03:03:53 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2010-Aug-24 03:03:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-24 03:03:53 LOG5 end_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2010-Aug-24 03:03:53 LOG1 fixed_driftmap: New position: year = 2010.6464824004361 RA = 00:46:06.4 RA/Dec = 00:46:42.5 +23:32:32.0 2010-Aug-24 03:03:53 NOTE fixed_driftmap: Correcting ZA to 5:11:18.3 ... 2010-Aug-24 03:03:53 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 5.1884185549 -CF 2010-Aug-24 03:03:53 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-24 03:03:53 START begin_task: Starting task 'WAPP calibration' 2010-Aug-24 03:03:53 LOG5 begin_task: Level: (2) ID = <10343> Status = 0 0 0 0 ok 2010-Aug-24 03:03:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-24 03:03:53 START begin_task: Starting task 'selecting calibration type' 2010-Aug-24 03:03:53 LOG5 begin_task: Level: (3) ID = <10344> Status = 0 0 0 0 ok 2010-Aug-24 03:03:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-24 03:03:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-24 03:03:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 03:03:53 START begin_task: Starting task 'waiting on setcal' 2010-Aug-24 03:03:53 LOG5 begin_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2010-Aug-24 03:03:53 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 5.1884185549 -CF 2010-Aug-24 03:03:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 03:03:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-24 03:03:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-24 03:03:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 03:03:53 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-24 03:03:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-24 03:03:53 LOG5 end_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2010-Aug-24 03:03:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-24 03:03:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 03:03:53 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-24 03:03:53 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 03:03:53 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2010-Aug-24 03:03:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-24 03:03:53 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 03:03:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 03:03:53 LOG5 end_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2010-Aug-24 03:03:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 03:03:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-24 03:03:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-24 03:03:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-24 03:03:54 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-24 03:03:54 LOG5 begin_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2010-Aug-24 03:03:54 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-24 03:03:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-24 03:03:54 LOG5 end_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2010-Aug-24 03:03:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-24 03:03:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-24 03:03:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-24 03:03:54 LOG5 end_task: Level: (3) ID = <10344> Status = 0 0 0 0 ok 2010-Aug-24 03:03:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-24 03:03:54 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-24 03:03:54 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-24 03:03:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-24 03:03:54 LOG5 begin_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2010-Aug-24 03:03:54 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-24 03:03:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-24 03:03:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-24 03:03:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-24 03:03:54 LOG5 end_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2010-Aug-24 03:03:54 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-24 03:03:54 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-24 03:03:54 LOG5 begin_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2010-Aug-24 03:03:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-24 03:03:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-24 03:03:54 INFO2 take_data: Starting WAPP 1-second scan: 23600037 2010-Aug-24 03:03:54 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-24 03:03:54 LOG5 begin_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2010-Aug-24 03:03:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-24 03:03:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-24 03:03:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25435.00 2010-Aug-24 03:03:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-24 03:03:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 03:03:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 03:03:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1018.750000 MHz 2010-Aug-24 03:03:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1006.250000 MHz 2010-Aug-24 03:03:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1043.750000 MHz 2010-Aug-24 03:03:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1031.250000 MHz 2010-Aug-24 03:03:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz