2010-Aug-20 23:42:54 BEGIN executive: CIMA executive starting ... 2010-Aug-20 23:42:54 NOTE executive: STARTING NEW CIMA SESSION 2010-Aug-20 23:42:54 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-Aug-20 23:42:54 INFO4 executive: This is an ON-LINE session 2010-Aug-20 23:42:54 INFO4 executive: This is a LOCAL session 2010-Aug-20 23:42:54 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-Aug-20 23:42:54 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Ron Olowin' 2010-Aug-20 23:42:54 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20100820' 2010-Aug-20 23:42:55 LOG2 log_preferences: Currently applied preferences: 2010-Aug-20 23:42:55 LOG2 log_preferences: prefs(dailylog) = daily 2010-Aug-20 23:42:55 LOG2 log_preferences: prefs(offlinelog) = skip 2010-Aug-20 23:42:55 LOG2 log_preferences: prefs(datawindow) = open 2010-Aug-20 23:42:55 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-Aug-20 23:42:55 LOG2 log_preferences: prefs(wappfailure) = abort 2010-Aug-20 23:42:55 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-Aug-20 23:42:55 LOG2 log_preferences: prefs(logcolours) = full 2010-Aug-20 23:42:55 LOG2 log_preferences: prefs(displaylevel) = INFO5 2010-Aug-20 23:42:55 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-Aug-20 23:42:55 LOG2 log_preferences: prefs(displayformat) = long 2010-Aug-20 23:42:55 LOG2 log_preferences: prefs(logformat) = new 2010-Aug-20 23:42:55 LOG2 log_preferences: prefs(fontsize) = 3 2010-Aug-20 23:42:55 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-Aug-20 23:42:55 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2010-Aug-20 23:42:55 ALERT executive: CIMA executive ready 2010-Aug-20 23:42:56 NOTE frontend: CIMA frontend ready 2010-Aug-20 23:42:56 LOG4 got_cormsg: From DATATAKING: vw% setup 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2010-Aug-20 23:43:01 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: vw% io 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-Aug-20 23:43:01 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:43:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:43:05 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-Aug-20 23:43:05 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-Aug-20 23:43:05 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-Aug-20 23:43:05 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-Aug-20 23:43:05 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-20 23:43:05 NOTE select_receiver: Starting to select receiver ALFA 2010-Aug-20 23:43:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Aug-20 23:43:05 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Aug-20 23:43:05 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Aug-20 23:43:05 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Aug-20 23:43:05 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Aug-20 23:43:05 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-20 23:43:05 DONE finish_task: DONE finished selecting: receiver ALFA 2010-Aug-20 23:43:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-20 23:43:06 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Aug-20 23:43:06 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-20 23:43:06 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Aug-20 23:43:06 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Aug-20 23:43:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:43:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:43:17 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Aug-20 23:43:17 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Aug-20 23:43:17 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Aug-20 23:43:17 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Aug-20 23:43:17 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Aug-20 23:43:17 NOTE restart_wapp: Restarting all WAPPs 2010-Aug-20 23:43:17 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Aug-20 23:43:17 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Aug-20 23:43:17 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Aug-20 23:43:17 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-20 23:43:20 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Aug-20 23:43:20 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Aug-20 23:43:20 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Aug-20 23:43:20 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Aug-20 23:43:46 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc_aug10.cmd' 2010-Aug-20 23:43:52 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc_aug10.cmd' to executive ... 2010-Aug-20 23:43:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_10.conf} 2010-Aug-20 23:43:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {CATALOG galfa_togs.cat} 2010-Aug-20 23:43:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {SEEK galfasrc} 2010-Aug-20 23:43:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 10 {TRACKCURPOS} 2010-Aug-20 23:43:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 11 {ALFAANGLE 19.} 2010-Aug-20 23:43:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {WAITTRACK} 2010-Aug-20 23:43:52 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2010-Aug-20 23:43:52 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Aug-20 23:43:52 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc_aug10.cmd 1 1 7 2010-Aug-20 23:43:52 LOG4 run_command_file: Calling 'run_command_file command_galfasrc_aug10.cmd 1 1 7' 2010-Aug-20 23:43:52 BEGIN begin_task: Starting task 'running command file 'command_galfasrc_aug10.cmd'' 2010-Aug-20 23:43:52 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-20 23:43:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc_aug10.cmd' ...} 2010-Aug-20 23:43:52 NOTE run_command_file: Starting execution of command file 'command_galfasrc_aug10.cmd' from line 1 2010-Aug-20 23:43:53 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_10.conf' 2010-Aug-20 23:43:53 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-20 23:43:53 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Aug-20 23:43:53 NOTE CIMA-load_config_file: Loading configuration file 'togs_10.conf' 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Aug-20 23:43:53 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Aug-20 23:43:54 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Aug-20 23:43:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Aug-20 23:43:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Aug-20 23:43:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-20 23:43:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-20 23:43:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-20 23:43:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-20 23:43:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Aug-20 23:43:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Aug-20 23:43:55 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Aug-20 23:43:55 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-20 23:43:55 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Aug-20 23:43:55 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-20 23:43:55 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Aug-20 23:43:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Aug-20 23:43:55 INFO1 config_iflo: Selecting receiver ALFA 2010-Aug-20 23:43:55 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-Aug-20 23:43:55 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2010-Aug-20 23:43:55 START begin_task: Starting task 'selecting receiver ALFA' 2010-Aug-20 23:43:55 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-20 23:43:55 NOTE select_receiver: Starting to select receiver ALFA 2010-Aug-20 23:43:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Aug-20 23:43:55 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Aug-20 23:43:55 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Aug-20 23:43:55 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-20 23:43:55 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-Aug-20 23:43:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 23:43:55 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Aug-20 23:43:55 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-20 23:43:55 START begin_task: Starting task 'waiting for receiver ALFA' 2010-Aug-20 23:43:55 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Aug-20 23:43:55 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-Aug-20 23:43:55 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Aug-20 23:43:55 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-Aug-20 23:43:55 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-Aug-20 23:43:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 23:43:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 23:43:55 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 23:43:55 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Aug-20 23:43:55 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 23:43:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 23:43:55 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Aug-20 23:43:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 23:43:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: alfafb 1 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-Aug-20 23:43:55 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Aug-20 23:43:55 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-Aug-20 23:43:55 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Aug-20 23:43:55 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Aug-20 23:43:55 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Aug-20 23:43:55 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Aug-20 23:43:55 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Aug-20 23:43:55 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:43:55 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Aug-20 23:43:56 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-Aug-20 23:43:56 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Aug-20 23:43:56 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-Aug-20 23:43:56 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-Aug-20 23:43:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Aug-20 23:43:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:43:56 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Aug-20 23:43:56 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-Aug-20 23:43:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:44:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:11 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 23:44:11 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Aug-20 23:44:11 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Aug-20 23:44:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Aug-20 23:44:11 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Aug-20 23:44:11 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-20 23:44:11 DONE finish_task: DONE finished configuration: IF/LO path 2010-Aug-20 23:44:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-20 23:44:11 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Aug-20 23:44:11 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-20 23:44:11 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Aug-20 23:44:11 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-20 23:44:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Aug-20 23:44:11 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Aug-20 23:44:12 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Aug-20 23:44:12 START begin_task: Starting task 'selecting calibration port' 2010-Aug-20 23:44:12 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Aug-20 23:44:12 LOG3 vw_send: To DATATAKING: calport 3 2010-Aug-20 23:44:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Aug-20 23:44:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:44:12 START begin_task: Starting task 'waiting on calport' 2010-Aug-20 23:44:12 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-Aug-20 23:44:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:12 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Aug-20 23:44:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:44:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:12 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 23:44:12 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Aug-20 23:44:12 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-Aug-20 23:44:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Aug-20 23:44:12 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Aug-20 23:44:12 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Aug-20 23:44:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 23:44:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 23:44:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 23:44:12 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Aug-20 23:44:12 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 23:44:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 23:44:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 23:44:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 23:44:12 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Aug-20 23:44:12 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Aug-20 23:44:12 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Aug-20 23:44:12 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Aug-20 23:44:12 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Aug-20 23:44:12 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Aug-20 23:44:12 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Aug-20 23:44:12 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Aug-20 23:44:12 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Aug-20 23:44:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-20 23:44:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-20 23:44:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-20 23:44:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-20 23:44:12 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Aug-20 23:44:12 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Aug-20 23:44:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 23:44:12 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Aug-20 23:44:12 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 23:44:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 23:44:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 23:44:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 23:44:12 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Aug-20 23:44:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-20 23:44:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-20 23:44:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-20 23:44:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-20 23:44:12 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Aug-20 23:44:12 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-20 23:44:12 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Aug-20 23:44:13 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-20 23:44:13 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Aug-20 23:44:13 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-20 23:44:13 COMMAND run_command_line: EXECUTING command 8: 'CATALOG galfa_togs.cat' 2010-Aug-20 23:44:13 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/galfa_togs.cat' 2010-Aug-20 23:44:13 COMMAND run_command_line: EXECUTING command 9: 'SEEK galfasrc' 2010-Aug-20 23:44:13 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/galfa_togs.cat galfasrc nooffset wait' 2010-Aug-20 23:44:13 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2010-Aug-20 23:44:13 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-20 23:44:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2010-Aug-20 23:44:13 LOG3 track_source: Calling 'track_source galfasrc 180.0 4. F 0.0 0.0 main small /share/obs4/usr/a2010/galfa_togs.cat 0 Topocentric velocity(optical)' 2010-Aug-20 23:44:13 START begin_task: Starting task 'sending tracking commands' 2010-Aug-20 23:44:13 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-20 23:44:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2010-Aug-20 23:44:13 INFO1 track_source: Starting to track galfasrc 2010-Aug-20 23:44:13 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2010-Aug-20 23:44:13 LOG3 vw_send: To DATATAKING: set ra 180.0 2010-Aug-20 23:44:13 LOG3 vw_send: To DATATAKING: set dec 4. 2010-Aug-20 23:44:13 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-20 23:44:13 LOG3 vw_send: To DATATAKING: pnt tr 180.0 4. -CF 2010-Aug-20 23:44:13 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-20 23:44:13 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-20 23:44:13 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-20 23:44:13 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-20 23:44:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 23:44:13 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-20 23:44:13 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-20 23:44:13 START begin_task: Starting task 'waiting on telescope' 2010-Aug-20 23:44:13 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-20 23:44:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-20 23:44:13 LOG3 waittrk: Start waittrk 5 2010-Aug-20 23:44:13 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-20 23:44:13 LOG5 begin_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2010-Aug-20 23:44:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-20 23:44:13 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2010-Aug-20 23:44:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Aug-20 23:44:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Aug-20 23:44:13 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2010-Aug-20 23:44:13 LOG4 got_cormsg: From DATATAKING: set dec 4. 2010-Aug-20 23:44:13 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2010-Aug-20 23:44:13 LOG4 got_cormsg: From DATATAKING: vw% 4. 2010-Aug-20 23:44:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:13 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-20 23:44:13 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 4. -CF 2010-Aug-20 23:44:13 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-20 23:44:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-20 23:44:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:13 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0034.fits 2010-Aug-20 23:44:13 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0034.fits} 2010-Aug-20 23:44:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-20 23:44:18 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-20 23:44:18 LOG5 end_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2010-Aug-20 23:44:18 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-20 23:44:18 LOG5 begin_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2010-Aug-20 23:44:45 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-20 23:44:45 LOG5 end_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2010-Aug-20 23:44:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-20 23:44:45 INFO2 waittrk: Now tracking galfasrc 2010-Aug-20 23:44:45 LOG4 waittrk: Current telescope position: Az = 179.73 ZA = 4.02 2010-Aug-20 23:44:45 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-20 23:44:45 LOG5 finish_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-20 23:44:45 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-20 23:44:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 23:44:45 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-20 23:44:45 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-20 23:44:45 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2010-Aug-20 23:44:45 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-20 23:44:45 DONE finish_task: DONE finished tracking: source 'galfasrc' 2010-Aug-20 23:44:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-20 23:44:45 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2010-Aug-20 23:44:45 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-20 23:44:45 COMMAND run_command_line: EXECUTING command 10: 'TRACKCURPOS' 2010-Aug-20 23:44:45 BEGIN begin_task: Starting task 'tracking current position' 2010-Aug-20 23:44:45 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-20 23:44:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2010-Aug-20 23:44:45 INFO1 track_current_pos: Starting to track the current commanded position RA = 21:14:39.9 and Dec = +22:18:23.9 2010-Aug-20 23:44:45 LOG3 track_source: Calling 'track_source Cur-pos 211439.9 221823.9 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-Aug-20 23:44:45 START begin_task: Starting task 'sending tracking commands' 2010-Aug-20 23:44:45 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-20 23:44:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2010-Aug-20 23:44:45 INFO1 track_source: Starting to track Cur-pos 2010-Aug-20 23:44:45 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2010-Aug-20 23:44:45 LOG3 vw_send: To DATATAKING: set ra 211439.9 2010-Aug-20 23:44:45 LOG3 vw_send: To DATATAKING: set dec 221823.9 2010-Aug-20 23:44:45 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-20 23:44:45 LOG3 vw_send: To DATATAKING: pnt tr 211439.9 221823.9 -CJ 2010-Aug-20 23:44:45 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-20 23:44:45 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-20 23:44:45 LOG5 finish_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-20 23:44:45 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-20 23:44:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 23:44:45 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-20 23:44:45 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-20 23:44:45 START begin_task: Starting task 'waiting on telescope' 2010-Aug-20 23:44:45 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-20 23:44:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-20 23:44:45 LOG3 waittrk: Start waittrk 5 2010-Aug-20 23:44:45 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-20 23:44:45 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2010-Aug-20 23:44:45 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2010-Aug-20 23:44:45 LOG4 got_cormsg: From DATATAKING: set ra 211439.9 2010-Aug-20 23:44:45 LOG4 got_cormsg: From DATATAKING: set dec 221823.9 2010-Aug-20 23:44:45 LOG4 got_cormsg: From DATATAKING: vw% 211439.9 2010-Aug-20 23:44:45 LOG4 got_cormsg: From DATATAKING: vw% 221823.9 2010-Aug-20 23:44:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:45 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-20 23:44:45 LOG4 got_cormsg: From DATATAKING: pnt tr 211439.9 221823.9 -CJ 2010-Aug-20 23:44:45 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-20 23:44:45 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-20 23:44:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:44:50 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-20 23:44:50 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2010-Aug-20 23:44:50 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-20 23:44:50 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Aug-20 23:44:54 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-20 23:44:54 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Aug-20 23:44:54 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-20 23:44:54 INFO2 waittrk: Now tracking Cur-pos 2010-Aug-20 23:44:54 LOG4 waittrk: Current telescope position: Az = 179.17 ZA = 4.02 2010-Aug-20 23:44:54 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-20 23:44:54 LOG5 finish_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-20 23:44:54 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-20 23:44:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 23:44:54 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-20 23:44:54 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-20 23:44:55 STOP finish_task: Finishing task 'tracking current position' 2010-Aug-20 23:44:55 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-20 23:44:55 DONE finish_task: DONE finished tracking: current position 2010-Aug-20 23:44:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-20 23:44:55 END end_task: Finishing task 'tracking current position' with status 'OK' 2010-Aug-20 23:44:55 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-20 23:44:55 COMMAND run_command_line: EXECUTING command 11: 'ALFAANGLE 19.' 2010-Aug-20 23:44:55 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19. 2010-Aug-20 23:44:55 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-20 23:44:55 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-20 23:44:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-20 23:44:55 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-20 23:44:55 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19. REPLY 2010-Aug-20 23:44:55 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Aug-20 23:44:55 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Aug-20 23:44:55 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Aug-20 23:44:56 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-20 23:44:56 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-20 23:44:56 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Aug-20 23:44:56 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Aug-20 23:44:56 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Aug-20 23:44:56 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-20 23:44:56 LOG5 finish_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-20 23:44:56 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-20 23:44:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-20 23:44:56 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-20 23:44:56 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-20 23:44:56 COMMAND run_command_line: EXECUTING command 12: 'WAITTRACK' 2010-Aug-20 23:44:56 BEGIN begin_task: Starting task 'waiting on telescope' 2010-Aug-20 23:44:56 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-20 23:44:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-20 23:44:56 LOG3 waittrk: Start waittrk 5 2010-Aug-20 23:44:56 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-20 23:44:56 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Aug-20 23:45:01 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-20 23:45:01 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Aug-20 23:45:01 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-20 23:45:01 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Aug-20 23:45:01 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-20 23:45:01 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Aug-20 23:45:01 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Aug-20 23:45:01 INFO2 waittrk: Now tracking Cur-pos 2010-Aug-20 23:45:01 LOG4 waittrk: Current telescope position: Az = 178.79 ZA = 4.02 2010-Aug-20 23:45:01 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-20 23:45:01 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-20 23:45:01 DONE finish_task: DONE finished waiting: telescope on source 2010-Aug-20 23:45:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-20 23:45:01 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-20 23:45:01 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-20 23:45:01 COMMAND run_command_line: EXECUTING command 16: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-Aug-20 23:45:01 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-Aug-20 23:45:02 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-20 23:45:02 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-Aug-20 23:45:02 BEGIN begin_task: Starting task 'smart frequency switching' 2010-Aug-20 23:45:02 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-20 23:45:02 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2010-Aug-20 23:45:02 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-Aug-20 23:45:02 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-Aug-20 23:45:02 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 23:45:02 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Aug-20 23:45:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 23:45:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 23:45:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:45:02 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 23:45:02 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2010-Aug-20 23:45:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 23:45:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:45:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:45:02 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 23:45:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 23:45:02 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2010-Aug-20 23:45:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 23:45:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 23:45:02 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 23:45:02 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 23:45:02 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Aug-20 23:45:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:45:02 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 23:45:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 23:45:02 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Aug-20 23:45:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 23:45:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 23:45:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 23:45:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 23:45:02 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 23:45:02 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-Aug-20 23:45:02 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 23:45:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 23:45:02 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-Aug-20 23:45:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 23:45:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 23:45:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 23:45:02 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Aug-20 23:45:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-20 23:45:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-20 23:45:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-20 23:45:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-20 23:45:02 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20100820.a2010.0034.fits' is empty! 2010-Aug-20 23:45:02 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-Aug-20 23:45:02 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Aug-20 23:45:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 23:45:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 23:45:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 23:45:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 23:45:02 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Aug-20 23:45:02 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 23:45:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 23:45:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 23:45:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 23:45:02 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Aug-20 23:45:02 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Aug-20 23:45:02 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-20 23:45:02 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-20 23:45:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Aug-20 23:45:03 INFO2 adjust_power: Starting to adjust WAPP power 2010-Aug-20 23:45:03 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Aug-20 23:45:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Aug-20 23:45:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:45:03 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Aug-20 23:45:03 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Aug-20 23:45:03 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Aug-20 23:45:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:45:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-20 23:45:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:45:06 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 23:45:06 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Aug-20 23:45:06 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Aug-20 23:45:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Aug-20 23:45:06 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-20 23:45:06 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-20 23:45:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Aug-20 23:45:06 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-20 23:45:06 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-20 23:45:06 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-20 23:45:06 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-20 23:45:06 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Aug-20 23:45:06 LOG5 begin_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2010-Aug-20 23:45:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:45:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Aug-20 23:45:06 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Aug-20 23:45:06 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 3 3 dB 2010-Aug-20 23:45:06 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 5 dB 2010-Aug-20 23:45:06 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Aug-20 23:45:06 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Aug-20 23:45:06 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Aug-20 23:45:06 LOG5 end_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2010-Aug-20 23:45:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.882 0.942 ALFA beam 1: 0.947 1.001 2010-Aug-20 23:45:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.982 0.911 ALFA beam 3: 1.067 0.963 2010-Aug-20 23:45:06 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.105 0.873 ALFA beam 5: 1.106 1.120 2010-Aug-20 23:45:07 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.901 0.843 ALFA beam 7: 0.989 1.000 2010-Aug-20 23:45:07 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-20 23:45:07 LOG5 finish_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-20 23:45:07 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Aug-20 23:45:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 23:45:07 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-20 23:45:07 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-20 23:45:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 23:45:07 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-20 23:45:07 LOG5 finish_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-20 23:45:07 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Aug-20 23:45:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 23:45:07 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-20 23:45:07 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-20 23:45:07 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-Aug-20 23:45:07 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-20 23:45:07 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-20 23:45:07 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:45:07 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63789 J 2010-Aug-20 23:45:07 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:45:07 LOG2 antvel: Parameters to Doppler: Topocentric 99906 2010 232 0.0 2010-Aug-20 23:45:07 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:45:07 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-20 23:45:07 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-20 23:45:07 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:45:07 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:45:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-20 23:45:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:45:07 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-Aug-20 23:45:07 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:45:07 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Aug-20 23:45:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-20 23:45:07 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.258906 2010.6378909042514 18.999933 2010-Aug-20 23:45:07 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666947 22.306638888888894 2010-Aug-20 23:45:07 LOG4 log_alfabeam: ALFABEAM 1 21.245807778053205 22.202297681466348 2010-Aug-20 23:45:07 LOG4 log_alfabeam: ALFABEAM 2 21.250644264353518 22.272881825651538 2010-Aug-20 23:45:07 LOG4 log_alfabeam: ALFABEAM 3 21.249363879658169 22.377547972720528 2010-Aug-20 23:45:07 LOG4 log_alfabeam: ALFABEAM 4 21.242957847785579 22.410880995549224 2010-Aug-20 23:45:07 LOG4 log_alfabeam: ALFABEAM 5 21.238081151024108 22.338443537180506 2010-Aug-20 23:45:07 LOG4 log_alfabeam: ALFABEAM 6 21.239650009344967 22.234563148811233 2010-Aug-20 23:45:07 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200077 2010-Aug-20 23:45:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:45:07 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Aug-20 23:45:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:45:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-20 23:45:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:45:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:45:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:45:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-20 23:45:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13508.00 2010-Aug-20 23:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:45:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:45:18 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Aug-20 23:45:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:45:18 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Aug-20 23:45:18 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-Aug-20 23:45:18 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-20 23:45:18 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-20 23:45:18 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:45:18 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63789 J 2010-Aug-20 23:45:18 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:45:18 LOG2 antvel: Parameters to Doppler: Topocentric 99918 2010 232 0.0 2010-Aug-20 23:45:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:45:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-20 23:45:18 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-20 23:45:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:45:18 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:45:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-20 23:45:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:45:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-Aug-20 23:45:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:45:18 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Aug-20 23:45:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-20 23:45:18 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.262249 2010.6378912845084 18.999933 2010-Aug-20 23:45:18 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666663 22.306638888888891 2010-Aug-20 23:45:18 LOG4 log_alfabeam: ALFABEAM 1 21.245897143579239 22.202534936810327 2010-Aug-20 23:45:18 LOG4 log_alfabeam: ALFABEAM 2 21.250672818482386 22.273913497793355 2010-Aug-20 23:45:18 LOG4 log_alfabeam: ALFABEAM 3 21.249302646701892 22.378360546919467 2010-Aug-20 23:45:18 LOG4 log_alfabeam: ALFABEAM 4 21.242868463415316 22.410632585538824 2010-Aug-20 23:45:18 LOG4 log_alfabeam: ALFABEAM 5 21.238054348568891 22.337394821816918 2010-Aug-20 23:45:18 LOG4 log_alfabeam: ALFABEAM 6 21.239712134904568 22.233780859810281 2010-Aug-20 23:45:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200078 2010-Aug-20 23:45:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:45:19 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-Aug-20 23:45:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:45:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-20 23:45:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:45:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:45:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:45:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-20 23:45:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13520.00 2010-Aug-20 23:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:45:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:45:30 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-Aug-20 23:45:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:45:30 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Aug-20 23:45:30 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-Aug-20 23:45:30 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-20 23:45:30 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-20 23:45:30 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:45:30 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63789 J 2010-Aug-20 23:45:30 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:45:30 LOG2 antvel: Parameters to Doppler: Topocentric 99930 2010 232 0.0 2010-Aug-20 23:45:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:45:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-20 23:45:30 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-20 23:45:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:45:30 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:45:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-20 23:45:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:45:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-Aug-20 23:45:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:45:30 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Aug-20 23:45:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-20 23:45:30 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.265591 2010.6378916647654 18.999933 2010-Aug-20 23:45:30 LOG4 log_alfabeam: ALFABEAM 0 21.244416666667053 22.306638888888880 2010-Aug-20 23:45:30 LOG4 log_alfabeam: ALFABEAM 1 21.245986206370119 22.202786665657310 2010-Aug-20 23:45:30 LOG4 log_alfabeam: ALFABEAM 2 21.250700463084687 22.274948808028327 2010-Aug-20 23:45:30 LOG4 log_alfabeam: ALFABEAM 3 21.249240775909101 22.379162142755298 2010-Aug-20 23:45:30 LOG4 log_alfabeam: ALFABEAM 4 21.242779401320131 22.410369731978914 2010-Aug-20 23:45:30 LOG4 log_alfabeam: ALFABEAM 5 21.238028482895629 22.336343050017270 2010-Aug-20 23:45:30 LOG4 log_alfabeam: ALFABEAM 6 21.239774844371375 22.233009799633379 2010-Aug-20 23:45:30 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200079 2010-Aug-20 23:45:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:45:31 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-Aug-20 23:45:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:45:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-20 23:45:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:45:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:45:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:45:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-20 23:45:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13532.00 2010-Aug-20 23:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:45:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:45:42 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-Aug-20 23:45:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:45:42 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Aug-20 23:45:42 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-Aug-20 23:45:42 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-20 23:45:42 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-20 23:45:42 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:45:42 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63789 J 2010-Aug-20 23:45:42 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:45:42 LOG2 antvel: Parameters to Doppler: Topocentric 99942 2010 232 0.0 2010-Aug-20 23:45:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:45:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-20 23:45:42 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-20 23:45:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:45:42 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:45:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-20 23:45:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:45:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-Aug-20 23:45:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:45:42 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Aug-20 23:45:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-20 23:45:42 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.268934 2010.6378920450225 18.999933 2010-Aug-20 23:45:42 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666829 22.306638888888880 2010-Aug-20 23:45:42 LOG4 log_alfabeam: ALFABEAM 1 21.246074983614609 22.203052875925497 2010-Aug-20 23:45:42 LOG4 log_alfabeam: ALFABEAM 2 21.250727205424226 22.275987939590493 2010-Aug-20 23:45:42 LOG4 log_alfabeam: ALFABEAM 3 21.249178257534968 22.379952931757796 2010-Aug-20 23:45:42 LOG4 log_alfabeam: ALFABEAM 4 21.242690644254786 22.410092429434808 2010-Aug-20 23:45:42 LOG4 log_alfabeam: ALFABEAM 5 21.238003546256063 22.335288040697890 2010-Aug-20 23:45:42 LOG4 log_alfabeam: ALFABEAM 6 21.239838147448694 22.232249788992064 2010-Aug-20 23:45:42 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200080 2010-Aug-20 23:45:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:45:43 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-Aug-20 23:45:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:45:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-20 23:45:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:45:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:45:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-20 23:45:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13544.00 2010-Aug-20 23:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:45:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:45:54 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-Aug-20 23:45:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:45:54 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Aug-20 23:45:54 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-Aug-20 23:45:54 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-20 23:45:54 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-20 23:45:54 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:45:54 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63789 J 2010-Aug-20 23:45:54 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:45:54 LOG2 antvel: Parameters to Doppler: Topocentric 99954 2010 232 0.0 2010-Aug-20 23:45:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:45:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-20 23:45:54 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-20 23:45:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:45:54 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:45:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-20 23:45:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:45:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-Aug-20 23:45:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:45:54 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-Aug-20 23:45:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-20 23:45:54 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.272276 2010.6378924252797 18.999933 2010-Aug-20 23:45:54 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666748 22.306638888888891 2010-Aug-20 23:45:54 LOG4 log_alfabeam: ALFABEAM 1 21.246163386603978 22.203333248491933 2010-Aug-20 23:45:54 LOG4 log_alfabeam: ALFABEAM 2 21.250753021362296 22.277029831643826 2010-Aug-20 23:45:54 LOG4 log_alfabeam: ALFABEAM 3 21.249115156945237 22.380732147274308 2010-Aug-20 23:45:54 LOG4 log_alfabeam: ALFABEAM 4 21.242602280831029 22.409801012704346 2010-Aug-20 23:45:54 LOG4 log_alfabeam: ALFABEAM 5 21.237979560121648 22.334230875167449 2010-Aug-20 23:45:54 LOG4 log_alfabeam: ALFABEAM 6 21.239901977852426 22.231501549830575 2010-Aug-20 23:45:54 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200081 2010-Aug-20 23:45:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:45:55 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Aug-20 23:45:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:45:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-20 23:45:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:45:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:45:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:45:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-20 23:45:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13556.00 2010-Aug-20 23:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:45:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:46:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:46:06 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Aug-20 23:46:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:46:06 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-Aug-20 23:46:06 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-Aug-20 23:46:06 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-20 23:46:06 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-20 23:46:06 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:46:06 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63789 J 2010-Aug-20 23:46:06 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:46:06 LOG2 antvel: Parameters to Doppler: Topocentric 99966 2010 232 0.0 2010-Aug-20 23:46:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:46:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-20 23:46:06 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-20 23:46:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:46:06 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:46:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-20 23:46:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:46:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-Aug-20 23:46:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:46:06 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Aug-20 23:46:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-20 23:46:06 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.275619 2010.6378928055367 18.999933 2010-Aug-20 23:46:06 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666748 22.306638888888891 2010-Aug-20 23:46:06 LOG4 log_alfabeam: ALFABEAM 1 21.246251433198527 22.203627774458113 2010-Aug-20 23:46:06 LOG4 log_alfabeam: ALFABEAM 2 21.250777919355418 22.278074666295918 2010-Aug-20 23:46:06 LOG4 log_alfabeam: ALFABEAM 3 21.249051464982287 22.381499976993776 2010-Aug-20 23:46:06 LOG4 log_alfabeam: ALFABEAM 4 21.242514293093397 22.409495492996328 2010-Aug-20 23:46:06 LOG4 log_alfabeam: ALFABEAM 5 21.237956515508525 22.333171372108438 2010-Aug-20 23:46:06 LOG4 log_alfabeam: ALFABEAM 6 21.239966344819038 22.230764886493454 2010-Aug-20 23:46:06 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200082 2010-Aug-20 23:46:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:46:07 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Aug-20 23:46:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:46:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-20 23:46:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:46:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:46:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:46:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-20 23:46:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13568.00 2010-Aug-20 23:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:46:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:46:18 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Aug-20 23:46:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:46:18 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Aug-20 23:46:18 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-Aug-20 23:46:18 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-20 23:46:18 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-20 23:46:18 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:46:18 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63789 J 2010-Aug-20 23:46:18 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:46:18 LOG2 antvel: Parameters to Doppler: Topocentric 99978 2010 232 0.0 2010-Aug-20 23:46:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:46:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-20 23:46:18 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-20 23:46:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:46:18 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:46:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-20 23:46:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:46:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-Aug-20 23:46:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:46:18 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Aug-20 23:46:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-20 23:46:18 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.278961 2010.6378931857937 18.999933 2010-Aug-20 23:46:18 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666755 22.306638888888894 2010-Aug-20 23:46:18 LOG4 log_alfabeam: ALFABEAM 1 21.246339036329676 22.203936084732646 2010-Aug-20 23:46:18 LOG4 log_alfabeam: ALFABEAM 2 21.250801878676633 22.279121376079289 2010-Aug-20 23:46:18 LOG4 log_alfabeam: ALFABEAM 3 21.248987248910510 22.382255698540085 2010-Aug-20 23:46:18 LOG4 log_alfabeam: ALFABEAM 4 21.242426767926315 22.409176254749003 2010-Aug-20 23:46:18 LOG4 log_alfabeam: ALFABEAM 5 21.237934430387082 22.332110616623712 2010-Aug-20 23:46:18 LOG4 log_alfabeam: ALFABEAM 6 21.240031180414228 22.230040476092743 2010-Aug-20 23:46:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200083 2010-Aug-20 23:46:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:46:19 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-Aug-20 23:46:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:46:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-20 23:46:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:46:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:46:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:46:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-20 23:46:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13580.00 2010-Aug-20 23:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:46:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:46:30 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-Aug-20 23:46:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:46:30 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Aug-20 23:46:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Aug-20 23:46:30 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 23:46:30 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 23:46:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 23:46:30 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Aug-20 23:46:30 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 23:46:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 23:46:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 23:46:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 23:46:30 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Aug-20 23:46:30 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-Aug-20 23:46:30 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-20 23:46:30 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-20 23:46:30 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:46:30 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63789 J 2010-Aug-20 23:46:30 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:46:30 LOG2 antvel: Parameters to Doppler: Topocentric 99990 2010 232 0.0 2010-Aug-20 23:46:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:46:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-20 23:46:30 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-20 23:46:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:46:30 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:46:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-20 23:46:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:46:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-Aug-20 23:46:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:46:30 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Aug-20 23:46:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-Aug-20 23:46:30 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.282304 2010.6378935660507 18.999933 2010-Aug-20 23:46:30 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666694 22.306638888888894 2010-Aug-20 23:46:30 LOG4 log_alfabeam: ALFABEAM 1 21.246426214717324 22.204258155117145 2010-Aug-20 23:46:30 LOG4 log_alfabeam: ALFABEAM 2 21.250824908990978 22.280170144605332 2010-Aug-20 23:46:30 LOG4 log_alfabeam: ALFABEAM 3 21.248922499974860 22.382999516983663 2010-Aug-20 23:46:30 LOG4 log_alfabeam: ALFABEAM 4 21.242339686477152 22.408843324224915 2010-Aug-20 23:46:30 LOG4 log_alfabeam: ALFABEAM 5 21.237913294542238 22.331048424477537 2010-Aug-20 23:46:30 LOG4 log_alfabeam: ALFABEAM 6 21.240096493592112 22.229328105616037 2010-Aug-20 23:46:30 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200084 2010-Aug-20 23:46:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:46:31 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-Aug-20 23:46:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:46:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-20 23:46:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:46:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:46:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:46:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-20 23:46:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13592.00 2010-Aug-20 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:46:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:46:42 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-Aug-20 23:46:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:46:42 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Aug-20 23:46:42 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-Aug-20 23:46:42 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-20 23:46:42 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-20 23:46:42 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:46:42 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63789 J 2010-Aug-20 23:46:42 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:46:42 LOG2 antvel: Parameters to Doppler: Topocentric 100002 2010 232 0.0 2010-Aug-20 23:46:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:46:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-20 23:46:42 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-20 23:46:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:46:42 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:46:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-20 23:46:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:46:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-Aug-20 23:46:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:46:42 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Aug-20 23:46:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-Aug-20 23:46:42 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.285646 2010.6378939463077 18.999933 2010-Aug-20 23:46:42 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666687 22.306638888888891 2010-Aug-20 23:46:42 LOG4 log_alfabeam: ALFABEAM 1 21.246512883277408 22.204593569157105 2010-Aug-20 23:46:42 LOG4 log_alfabeam: ALFABEAM 2 21.250846993007936 22.281219902504702 2010-Aug-20 23:46:42 LOG4 log_alfabeam: ALFABEAM 3 21.248857287010907 22.383730756516190 2010-Aug-20 23:46:42 LOG4 log_alfabeam: ALFABEAM 4 21.242253133563384 22.408497132785836 2010-Aug-20 23:46:42 LOG4 log_alfabeam: ALFABEAM 5 21.237893122443147 22.329985879756745 2010-Aug-20 23:46:42 LOG4 log_alfabeam: ALFABEAM 6 21.240162215099211 22.228628405410642 2010-Aug-20 23:46:42 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200085 2010-Aug-20 23:46:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:46:43 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Aug-20 23:46:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:46:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-20 23:46:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:46:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:46:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:46:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-20 23:46:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13604.00 2010-Aug-20 23:46:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:46:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:46:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:46:54 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Aug-20 23:46:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:46:54 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Aug-20 23:46:54 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-Aug-20 23:46:54 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-20 23:46:54 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-20 23:46:54 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:46:54 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63789 J 2010-Aug-20 23:46:54 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:46:54 LOG2 antvel: Parameters to Doppler: Topocentric 100014 2010 232 0.0 2010-Aug-20 23:46:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:46:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-20 23:46:54 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-20 23:46:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:46:54 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:46:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-20 23:46:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:46:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-Aug-20 23:46:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:46:54 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Aug-20 23:46:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-Aug-20 23:46:54 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.288988 2010.6378943265649 18.999933 2010-Aug-20 23:46:54 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666716 22.306638888888891 2010-Aug-20 23:46:54 LOG4 log_alfabeam: ALFABEAM 1 21.246599036059607 22.204942182929418 2010-Aug-20 23:46:54 LOG4 log_alfabeam: ALFABEAM 2 21.250868135398171 22.282270523022191 2010-Aug-20 23:46:54 LOG4 log_alfabeam: ALFABEAM 3 21.248791621185600 22.384449427288764 2010-Aug-20 23:46:54 LOG4 log_alfabeam: ALFABEAM 4 21.242167114924584 22.408137829291547 2010-Aug-20 23:46:54 LOG4 log_alfabeam: ALFABEAM 5 21.237873908281870 22.328923110694841 2010-Aug-20 23:46:54 LOG4 log_alfabeam: ALFABEAM 6 21.240228333956761 22.227941348169260 2010-Aug-20 23:46:54 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200086 2010-Aug-20 23:46:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:46:55 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Aug-20 23:46:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:46:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-20 23:46:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:46:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:46:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:46:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-20 23:46:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13616.00 2010-Aug-20 23:46:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:46:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:46:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:46:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:47:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:47:06 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Aug-20 23:47:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:47:06 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Aug-20 23:47:06 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-Aug-20 23:47:06 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-20 23:47:06 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-20 23:47:06 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:47:06 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63789 J 2010-Aug-20 23:47:06 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:47:06 LOG2 antvel: Parameters to Doppler: Topocentric 100026 2010 232 0.0 2010-Aug-20 23:47:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:47:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-20 23:47:06 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-20 23:47:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:47:06 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:47:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-20 23:47:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:47:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-Aug-20 23:47:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:47:06 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Aug-20 23:47:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-Aug-20 23:47:06 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.292331 2010.637894706822 18.999933 2010-Aug-20 23:47:06 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666798 22.306638888888894 2010-Aug-20 23:47:06 LOG4 log_alfabeam: ALFABEAM 1 21.246684667375003 22.205303854457515 2010-Aug-20 23:47:06 LOG4 log_alfabeam: ALFABEAM 2 21.250888340850000 22.283321882900118 2010-Aug-20 23:47:06 LOG4 log_alfabeam: ALFABEAM 3 21.248725513426081 22.385155541232020 2010-Aug-20 23:47:06 LOG4 log_alfabeam: ALFABEAM 4 21.242081636032939 22.407765560529324 2010-Aug-20 23:47:06 LOG4 log_alfabeam: ALFABEAM 5 21.237855646244288 22.327860241693038 2010-Aug-20 23:47:06 LOG4 log_alfabeam: ALFABEAM 6 21.240294839449710 22.227266905059189 2010-Aug-20 23:47:06 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200087 2010-Aug-20 23:47:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:47:07 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-Aug-20 23:47:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:47:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-20 23:47:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:47:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:47:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:47:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-20 23:47:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13628.00 2010-Aug-20 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:47:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:47:18 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-Aug-20 23:47:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:47:18 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Aug-20 23:47:18 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-Aug-20 23:47:18 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-20 23:47:18 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-20 23:47:18 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:47:18 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:47:18 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:47:18 LOG2 antvel: Parameters to Doppler: Topocentric 100038 2010 232 0.0 2010-Aug-20 23:47:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:47:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-20 23:47:18 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-20 23:47:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:47:18 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:47:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-20 23:47:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:47:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-Aug-20 23:47:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:47:18 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Aug-20 23:47:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-Aug-20 23:47:18 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.295673 2010.637895087079 18.999933 2010-Aug-20 23:47:18 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666694 22.306638888888880 2010-Aug-20 23:47:18 LOG4 log_alfabeam: ALFABEAM 1 21.246769695696923 22.205678102086445 2010-Aug-20 23:47:18 LOG4 log_alfabeam: ALFABEAM 2 21.250907597191684 22.284372918591355 2010-Aug-20 23:47:18 LOG4 log_alfabeam: ALFABEAM 3 21.248659034286256 22.385848495489839 2010-Aug-20 23:47:18 LOG4 log_alfabeam: ALFABEAM 4 21.241996778032473 22.407380822212286 2010-Aug-20 23:47:18 LOG4 log_alfabeam: ALFABEAM 5 21.237838345626464 22.326798346579611 2010-Aug-20 23:47:18 LOG4 log_alfabeam: ALFABEAM 6 21.240361660975804 22.226605633836378 2010-Aug-20 23:47:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200088 2010-Aug-20 23:47:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:47:19 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Aug-20 23:47:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:47:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-20 23:47:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:47:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:47:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:47:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-20 23:47:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13640.00 2010-Aug-20 23:47:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:47:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:47:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:47:30 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Aug-20 23:47:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:47:30 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Aug-20 23:47:30 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-Aug-20 23:47:30 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-20 23:47:30 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-20 23:47:30 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:47:30 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:47:30 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:47:30 LOG2 antvel: Parameters to Doppler: Topocentric 100050 2010 232 0.0 2010-Aug-20 23:47:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:47:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-20 23:47:30 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-20 23:47:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:47:30 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:47:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-20 23:47:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:47:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-Aug-20 23:47:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:47:30 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Aug-20 23:47:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-Aug-20 23:47:30 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.299016 2010.637895467336 18.999933 2010-Aug-20 23:47:30 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666694 22.306638888888891 2010-Aug-20 23:47:30 LOG4 log_alfabeam: ALFABEAM 1 21.246854142581224 22.206064871991785 2010-Aug-20 23:47:30 LOG4 log_alfabeam: ALFABEAM 2 21.250925916978684 22.285423828522411 2010-Aug-20 23:47:30 LOG4 log_alfabeam: ALFABEAM 3 21.248592175166564 22.386528541398533 2010-Aug-20 23:47:30 LOG4 log_alfabeam: ALFABEAM 4 21.241912519153331 22.406983669341905 2010-Aug-20 23:47:30 LOG4 log_alfabeam: ALFABEAM 5 21.237821993330918 22.325737222738486 2010-Aug-20 23:47:30 LOG4 log_alfabeam: ALFABEAM 6 21.240428807616972 22.225957276263181 2010-Aug-20 23:47:30 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200089 2010-Aug-20 23:47:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:47:31 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Aug-20 23:47:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:47:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-20 23:47:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:47:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:47:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:47:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-20 23:47:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13652.00 2010-Aug-20 23:47:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:47:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:47:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:47:42 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Aug-20 23:47:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:47:42 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Aug-20 23:47:42 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-Aug-20 23:47:42 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-20 23:47:42 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-20 23:47:42 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:47:42 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:47:42 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:47:42 LOG2 antvel: Parameters to Doppler: Topocentric 100062 2010 232 0.0 2010-Aug-20 23:47:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:47:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-20 23:47:42 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-20 23:47:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:47:42 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:47:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-20 23:47:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:47:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-Aug-20 23:47:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:47:42 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Aug-20 23:47:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-Aug-20 23:47:42 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.302358 2010.637895847593 18.999933 2010-Aug-20 23:47:42 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666680 22.306638888888891 2010-Aug-20 23:47:42 LOG4 log_alfabeam: ALFABEAM 1 21.246937929211519 22.206463643471967 2010-Aug-20 23:47:42 LOG4 log_alfabeam: ALFABEAM 2 21.250943291377208 22.286473558562864 2010-Aug-20 23:47:42 LOG4 log_alfabeam: ALFABEAM 3 21.248525007338600 22.387195125999664 2010-Aug-20 23:47:42 LOG4 log_alfabeam: ALFABEAM 4 21.241828937758736 22.406574636001871 2010-Aug-20 23:47:42 LOG4 log_alfabeam: ALFABEAM 5 21.237806595308324 22.324677931643542 2010-Aug-20 23:47:42 LOG4 log_alfabeam: ALFABEAM 6 21.240496208290711 22.225322340853889 2010-Aug-20 23:47:42 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200090 2010-Aug-20 23:47:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:47:43 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Aug-20 23:47:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:47:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-20 23:47:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:47:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:47:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:47:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-20 23:47:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13664.00 2010-Aug-20 23:47:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:47:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:47:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:47:54 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Aug-20 23:47:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:47:54 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Aug-20 23:47:54 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2010-Aug-20 23:47:54 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Aug-20 23:47:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 23:47:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 23:47:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 23:47:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 23:47:54 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Aug-20 23:47:54 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 23:47:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 23:47:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 23:47:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 23:47:54 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Aug-20 23:47:54 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Aug-20 23:47:54 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-Aug-20 23:47:54 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-20 23:47:54 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-20 23:47:54 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:47:54 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:47:54 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:47:54 LOG2 antvel: Parameters to Doppler: Topocentric 100074 2010 232 0.0 2010-Aug-20 23:47:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:47:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-20 23:47:54 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-20 23:47:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:47:54 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:47:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-20 23:47:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:47:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-Aug-20 23:47:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:47:54 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-Aug-20 23:47:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-20 23:47:55 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.305701 2010.6378962278502 18.999933 2010-Aug-20 23:47:55 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666719 22.306638888888891 2010-Aug-20 23:47:55 LOG4 log_alfabeam: ALFABEAM 1 21.247021078486760 22.206874354902688 2010-Aug-20 23:47:55 LOG4 log_alfabeam: ALFABEAM 2 21.250959733984523 22.287522317104472 2010-Aug-20 23:47:55 LOG4 log_alfabeam: ALFABEAM 3 21.248457521925673 22.387848519231259 2010-Aug-20 23:47:55 LOG4 log_alfabeam: ALFABEAM 4 21.241746010709214 22.406153784552725 2010-Aug-20 23:47:55 LOG4 log_alfabeam: ALFABEAM 5 21.237792137447617 22.323620259354620 2010-Aug-20 23:47:55 LOG4 log_alfabeam: ALFABEAM 6 21.240563872456537 22.224700551541542 2010-Aug-20 23:47:55 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200091 2010-Aug-20 23:47:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:47:55 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-Aug-20 23:47:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:47:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-20 23:47:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:47:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:47:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:47:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-20 23:47:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13676.00 2010-Aug-20 23:47:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:47:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:47:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:47:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:48:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:48:06 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-Aug-20 23:48:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:48:06 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-Aug-20 23:48:06 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-Aug-20 23:48:06 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-20 23:48:06 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-20 23:48:06 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:48:06 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:48:06 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:48:06 LOG2 antvel: Parameters to Doppler: Topocentric 100086 2010 232 0.0 2010-Aug-20 23:48:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:48:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-20 23:48:06 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-20 23:48:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:48:06 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:48:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-20 23:48:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:48:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-Aug-20 23:48:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:48:06 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Aug-20 23:48:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-20 23:48:06 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.309043 2010.6378966081072 18.999933 2010-Aug-20 23:48:06 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666677 22.306638888888891 2010-Aug-20 23:48:06 LOG4 log_alfabeam: ALFABEAM 1 21.247103514528757 22.207296450400467 2010-Aug-20 23:48:06 LOG4 log_alfabeam: ALFABEAM 2 21.250975239207769 22.288569063576993 2010-Aug-20 23:48:06 LOG4 log_alfabeam: ALFABEAM 3 21.248389790579061 22.388488218401761 2010-Aug-20 23:48:06 LOG4 log_alfabeam: ALFABEAM 4 21.241663813366031 22.405721683510471 2010-Aug-20 23:48:06 LOG4 log_alfabeam: ALFABEAM 5 21.237778622472877 22.322565250908479 2010-Aug-20 23:48:06 LOG4 log_alfabeam: ALFABEAM 6 21.240631728878910 22.224092367536237 2010-Aug-20 23:48:06 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200092 2010-Aug-20 23:48:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:48:07 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Aug-20 23:48:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:48:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-20 23:48:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:48:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:48:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:48:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-20 23:48:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13688.00 2010-Aug-20 23:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:48:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:48:18 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Aug-20 23:48:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:48:18 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Aug-20 23:48:18 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-Aug-20 23:48:18 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-20 23:48:18 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-20 23:48:18 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:48:18 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:48:18 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:48:18 LOG2 antvel: Parameters to Doppler: Topocentric 100098 2010 232 0.0 2010-Aug-20 23:48:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:48:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-20 23:48:18 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-20 23:48:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:48:18 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:48:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-20 23:48:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:48:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-Aug-20 23:48:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:48:18 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Aug-20 23:48:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-20 23:48:18 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.312386 2010.6378969883642 18.999933 2010-Aug-20 23:48:18 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666730 22.306638888888894 2010-Aug-20 23:48:18 LOG4 log_alfabeam: ALFABEAM 1 21.247185261657812 22.207729863077535 2010-Aug-20 23:48:18 LOG4 log_alfabeam: ALFABEAM 2 21.250989821589137 22.289614018326638 2010-Aug-20 23:48:18 LOG4 log_alfabeam: ALFABEAM 3 21.248321803961804 22.389114511536935 2010-Aug-20 23:48:18 LOG4 log_alfabeam: ALFABEAM 4 21.241582321147412 22.405278400024311 2010-Aug-20 23:48:18 LOG4 log_alfabeam: ALFABEAM 5 21.237766035369933 22.321512679131480 2010-Aug-20 23:48:18 LOG4 log_alfabeam: ALFABEAM 6 21.240699787569273 22.223497495629342 2010-Aug-20 23:48:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200093 2010-Aug-20 23:48:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:48:19 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Aug-20 23:48:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:48:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-20 23:48:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:48:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:48:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:48:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-20 23:48:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13700.00 2010-Aug-20 23:48:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:48:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:48:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:48:30 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Aug-20 23:48:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:48:30 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Aug-20 23:48:30 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-Aug-20 23:48:30 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-20 23:48:30 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-20 23:48:30 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:48:30 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:48:30 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:48:30 LOG2 antvel: Parameters to Doppler: Topocentric 100110 2010 232 0.0 2010-Aug-20 23:48:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:48:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-20 23:48:30 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-20 23:48:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:48:30 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:48:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-20 23:48:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:48:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-Aug-20 23:48:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:48:30 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Aug-20 23:48:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-20 23:48:30 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.315728 2010.6378973686212 18.999933 2010-Aug-20 23:48:30 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666698 22.306638888888891 2010-Aug-20 23:48:30 LOG4 log_alfabeam: ALFABEAM 1 21.247266247121818 22.208174005927091 2010-Aug-20 23:48:30 LOG4 log_alfabeam: ALFABEAM 2 21.251003478650627 22.290656158180212 2010-Aug-20 23:48:30 LOG4 log_alfabeam: ALFABEAM 3 21.248253633776756 22.389726946056321 2010-Aug-20 23:48:30 LOG4 log_alfabeam: ALFABEAM 4 21.241501606230567 22.404824532924003 2010-Aug-20 23:48:30 LOG4 log_alfabeam: ALFABEAM 5 21.237754375782856 22.320463568882392 2010-Aug-20 23:48:30 LOG4 log_alfabeam: ALFABEAM 6 21.240767977453512 22.222916346161682 2010-Aug-20 23:48:30 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200094 2010-Aug-20 23:48:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:48:31 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-Aug-20 23:48:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:48:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-20 23:48:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:48:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:48:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:48:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-20 23:48:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13712.00 2010-Aug-20 23:48:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:48:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:48:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:48:42 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-Aug-20 23:48:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:48:42 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Aug-20 23:48:42 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-Aug-20 23:48:42 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-20 23:48:42 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-20 23:48:42 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:48:42 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:48:42 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:48:42 LOG2 antvel: Parameters to Doppler: Topocentric 100122 2010 232 0.0 2010-Aug-20 23:48:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:48:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-20 23:48:42 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-20 23:48:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:48:42 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:48:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-20 23:48:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:48:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-Aug-20 23:48:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:48:42 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Aug-20 23:48:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-20 23:48:42 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.319071 2010.6378977488782 18.999933 2010-Aug-20 23:48:42 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666694 22.306638888888891 2010-Aug-20 23:48:42 LOG4 log_alfabeam: ALFABEAM 1 21.247346496711582 22.208628809397716 2010-Aug-20 23:48:42 LOG4 log_alfabeam: ALFABEAM 2 21.251016225765618 22.291695717162757 2010-Aug-20 23:48:42 LOG4 log_alfabeam: ALFABEAM 3 21.248185270054503 22.390325827212404 2010-Aug-20 23:48:42 LOG4 log_alfabeam: ALFABEAM 4 21.241421642547511 22.404360151524504 2010-Aug-20 23:48:42 LOG4 log_alfabeam: ALFABEAM 5 21.237743627919802 22.319417678132744 2010-Aug-20 23:48:42 LOG4 log_alfabeam: ALFABEAM 6 21.240836309255155 22.222348609792615 2010-Aug-20 23:48:42 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200095 2010-Aug-20 23:48:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:48:43 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Aug-20 23:48:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:48:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-20 23:48:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:48:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:48:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:48:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-20 23:48:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13724.00 2010-Aug-20 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:46 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 23:48:46.303 (seconds: 85726.303)!} 2010-Aug-20 23:48:46 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 23:48:46.303 (seconds: 85726.303)! 2010-Aug-20 23:48:47 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 85725.0 to 85726.0! 2010-Aug-20 23:48:48 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (85725.0 - 85727.0)! 2010-Aug-20 23:48:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:48:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:48:54 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Aug-20 23:48:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:48:54 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Aug-20 23:48:54 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-Aug-20 23:48:54 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-20 23:48:54 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-20 23:48:54 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:48:54 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:48:54 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:48:54 LOG2 antvel: Parameters to Doppler: Topocentric 100134 2010 232 0.0 2010-Aug-20 23:48:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:48:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-20 23:48:54 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-20 23:48:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:48:54 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:48:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-20 23:48:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:48:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-Aug-20 23:48:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:48:54 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Aug-20 23:48:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-20 23:48:54 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.322413 2010.6378981291355 18.999933 2010-Aug-20 23:48:54 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666663 22.306638888888894 2010-Aug-20 23:48:54 LOG4 log_alfabeam: ALFABEAM 1 21.247425940949540 22.209093659534425 2010-Aug-20 23:48:54 LOG4 log_alfabeam: ALFABEAM 2 21.251028063420101 22.292731692983224 2010-Aug-20 23:48:54 LOG4 log_alfabeam: ALFABEAM 3 21.248116784236529 22.390910751887482 2010-Aug-20 23:48:54 LOG4 log_alfabeam: ALFABEAM 4 21.241342498950129 22.403885880747993 2010-Aug-20 23:48:54 LOG4 log_alfabeam: ALFABEAM 5 21.237733788514884 22.318376008205288 2010-Aug-20 23:48:54 LOG4 log_alfabeam: ALFABEAM 6 21.240904712359569 22.221794648889670 2010-Aug-20 23:48:54 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200096 2010-Aug-20 23:48:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:48:55 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Aug-20 23:48:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:48:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-20 23:48:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:48:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:48:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:48:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-20 23:48:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13736.00 2010-Aug-20 23:48:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:48:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:48:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:48:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:49:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:49:06 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Aug-20 23:49:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:49:06 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Aug-20 23:49:06 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-Aug-20 23:49:06 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-20 23:49:06 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-20 23:49:06 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:49:06 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:49:06 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:49:06 LOG2 antvel: Parameters to Doppler: Topocentric 100146 2010 232 0.0 2010-Aug-20 23:49:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:49:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-20 23:49:06 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-20 23:49:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:49:06 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:49:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-20 23:49:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:49:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-Aug-20 23:49:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:49:06 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Aug-20 23:49:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-20 23:49:06 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.325756 2010.6378985093925 18.999933 2010-Aug-20 23:49:06 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666648 22.306638888888891 2010-Aug-20 23:49:06 LOG4 log_alfabeam: ALFABEAM 1 21.247504607116973 22.209568486724777 2010-Aug-20 23:49:06 LOG4 log_alfabeam: ALFABEAM 2 21.251039007690839 22.293764334778388 2010-Aug-20 23:49:06 LOG4 log_alfabeam: ALFABEAM 3 21.248048165564487 22.391482041387217 2010-Aug-20 23:49:06 LOG4 log_alfabeam: ALFABEAM 4 21.241264147869224 22.403401789459952 2010-Aug-20 23:49:06 LOG4 log_alfabeam: ALFABEAM 5 21.237724841136650 22.317338300906577 2010-Aug-20 23:49:06 LOG4 log_alfabeam: ALFABEAM 6 21.240973198346364 22.221254139275466 2010-Aug-20 23:49:06 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200097 2010-Aug-20 23:49:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:49:07 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Aug-20 23:49:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:49:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-20 23:49:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:49:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:49:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:49:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-20 23:49:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13748.00 2010-Aug-20 23:49:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:49:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:49:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:49:18 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Aug-20 23:49:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:49:18 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Aug-20 23:49:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Aug-20 23:49:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 23:49:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 23:49:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 23:49:18 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Aug-20 23:49:18 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 23:49:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 23:49:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 23:49:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 23:49:18 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Aug-20 23:49:18 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-Aug-20 23:49:18 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-20 23:49:18 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-20 23:49:18 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:49:18 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:49:18 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:49:18 LOG2 antvel: Parameters to Doppler: Topocentric 100158 2010 232 0.0 2010-Aug-20 23:49:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:49:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-20 23:49:18 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-20 23:49:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:49:18 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:49:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-20 23:49:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:49:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-Aug-20 23:49:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:49:18 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-Aug-20 23:49:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-Aug-20 23:49:18 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.329098 2010.6378988896495 18.999933 2010-Aug-20 23:49:18 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666677 22.306638888888891 2010-Aug-20 23:49:18 LOG4 log_alfabeam: ALFABEAM 1 21.247582429119834 22.210052654282766 2010-Aug-20 23:49:18 LOG4 log_alfabeam: ALFABEAM 2 21.251049061856044 22.294792664238980 2010-Aug-20 23:49:18 LOG4 log_alfabeam: ALFABEAM 3 21.247979484924354 22.392039340957076 2010-Aug-20 23:49:18 LOG4 log_alfabeam: ALFABEAM 4 21.241186654730086 22.402908524425726 2010-Aug-20 23:49:18 LOG4 log_alfabeam: ALFABEAM 5 21.237716779798532 22.316305531077337 2010-Aug-20 23:49:18 LOG4 log_alfabeam: ALFABEAM 6 21.241041697337405 22.220727396656901 2010-Aug-20 23:49:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200098 2010-Aug-20 23:49:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:49:19 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-Aug-20 23:49:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:49:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-20 23:49:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:49:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:49:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:49:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-20 23:49:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13760.00 2010-Aug-20 23:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:49:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:49:30 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-Aug-20 23:49:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:49:30 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-Aug-20 23:49:30 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-Aug-20 23:49:30 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-20 23:49:30 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-20 23:49:30 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:49:30 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:49:30 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:49:30 LOG2 antvel: Parameters to Doppler: Topocentric 100170 2010 232 0.0 2010-Aug-20 23:49:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:49:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-20 23:49:30 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-20 23:49:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:49:30 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:49:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-20 23:49:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:49:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-Aug-20 23:49:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:49:30 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Aug-20 23:49:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-Aug-20 23:49:30 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.332440 2010.6378992699065 18.999933 2010-Aug-20 23:49:30 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666687 22.306638888888891 2010-Aug-20 23:49:30 LOG4 log_alfabeam: ALFABEAM 1 21.247659412813743 22.210545946150518 2010-Aug-20 23:49:30 LOG4 log_alfabeam: ALFABEAM 2 21.251058239941578 22.295816641026835 2010-Aug-20 23:49:30 LOG4 log_alfabeam: ALFABEAM 3 21.247910751201537 22.392582825953774 2010-Aug-20 23:49:30 LOG4 log_alfabeam: ALFABEAM 4 21.241110013278949 22.402406303090029 2010-Aug-20 23:49:30 LOG4 log_alfabeam: ALFABEAM 5 21.237709589598396 22.315277730137051 2010-Aug-20 23:49:30 LOG4 log_alfabeam: ALFABEAM 6 21.241110201397930 22.220214235078469 2010-Aug-20 23:49:30 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200099 2010-Aug-20 23:49:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:49:31 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Aug-20 23:49:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:49:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-20 23:49:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:49:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:49:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:49:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-20 23:49:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13772.00 2010-Aug-20 23:49:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:49:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:49:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:49:42 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Aug-20 23:49:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:49:42 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Aug-20 23:49:42 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-Aug-20 23:49:42 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-20 23:49:42 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-20 23:49:42 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:49:42 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:49:42 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:49:42 LOG2 antvel: Parameters to Doppler: Topocentric 100182 2010 232 0.0 2010-Aug-20 23:49:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:49:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-20 23:49:42 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-20 23:49:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:49:42 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:49:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-20 23:49:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:49:42 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-Aug-20 23:49:42 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:49:42 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Aug-20 23:49:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-Aug-20 23:49:42 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.335783 2010.6378996501637 18.999933 2010-Aug-20 23:49:42 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666694 22.306638888888891 2010-Aug-20 23:49:42 LOG4 log_alfabeam: ALFABEAM 1 21.247735564282287 22.211048153899849 2010-Aug-20 23:49:42 LOG4 log_alfabeam: ALFABEAM 2 21.251066555677699 22.296836230638554 2010-Aug-20 23:49:42 LOG4 log_alfabeam: ALFABEAM 3 21.247841972739881 22.393112670154274 2010-Aug-20 23:49:42 LOG4 log_alfabeam: ALFABEAM 4 21.241034217040628 22.401895335114610 2010-Aug-20 23:49:42 LOG4 log_alfabeam: ALFABEAM 5 21.237703255965705 22.314254923637101 2010-Aug-20 23:49:42 LOG4 log_alfabeam: ALFABEAM 6 21.241178703127524 22.219714470705128 2010-Aug-20 23:49:42 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200100 2010-Aug-20 23:49:43 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:49:43 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-Aug-20 23:49:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:49:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-20 23:49:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:49:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:49:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:49:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-20 23:49:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13784.00 2010-Aug-20 23:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:49:54 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:49:54 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-Aug-20 23:49:54 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:49:54 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Aug-20 23:49:54 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-Aug-20 23:49:54 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-20 23:49:54 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-20 23:49:54 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:49:54 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:49:54 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:49:54 LOG2 antvel: Parameters to Doppler: Topocentric 100194 2010 232 0.0 2010-Aug-20 23:49:54 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:49:54 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-20 23:49:54 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-20 23:49:54 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:49:54 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:49:54 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-20 23:49:54 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:49:54 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-Aug-20 23:49:54 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:49:54 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Aug-20 23:49:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-Aug-20 23:49:54 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.339125 2010.6379000304207 18.999933 2010-Aug-20 23:49:54 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666680 22.306638888888891 2010-Aug-20 23:49:54 LOG4 log_alfabeam: ALFABEAM 1 21.247810822626224 22.211558614575932 2010-Aug-20 23:49:54 LOG4 log_alfabeam: ALFABEAM 2 21.251074016172527 22.297850495650358 2010-Aug-20 23:49:54 LOG4 log_alfabeam: ALFABEAM 3 21.247773219090654 22.393628588419070 2010-Aug-20 23:49:54 LOG4 log_alfabeam: ALFABEAM 4 21.240959326195103 22.401376292170596 2010-Aug-20 23:49:54 LOG4 log_alfabeam: ALFABEAM 5 21.237697769218688 22.313238042117025 2010-Aug-20 23:49:54 LOG4 log_alfabeam: ALFABEAM 6 21.241247134220192 22.219228352503539 2010-Aug-20 23:49:54 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200101 2010-Aug-20 23:49:55 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:49:55 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-Aug-20 23:49:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:49:55 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-20 23:49:55 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:49:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:49:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:49:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-20 23:49:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13796.00 2010-Aug-20 23:49:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:49:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:49:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:49:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:50:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:50:06 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:50:06 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-Aug-20 23:50:06 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:50:06 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Aug-20 23:50:06 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-Aug-20 23:50:06 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-20 23:50:06 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-20 23:50:06 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:50:06 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:50:06 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:50:06 LOG2 antvel: Parameters to Doppler: Topocentric 100206 2010 232 0.0 2010-Aug-20 23:50:06 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:50:06 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-20 23:50:06 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-20 23:50:06 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:50:06 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:50:06 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-20 23:50:06 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:50:06 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-Aug-20 23:50:06 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:50:06 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Aug-20 23:50:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-Aug-20 23:50:06 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.342468 2010.6379004106777 18.999933 2010-Aug-20 23:50:06 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666670 22.306638888888880 2010-Aug-20 23:50:06 LOG4 log_alfabeam: ALFABEAM 1 21.247885218761358 22.212077269323252 2010-Aug-20 23:50:06 LOG4 log_alfabeam: ALFABEAM 2 21.251080638643590 22.298859727203542 2010-Aug-20 23:50:06 LOG4 log_alfabeam: ALFABEAM 3 21.247704476959605 22.394130935378591 2010-Aug-20 23:50:06 LOG4 log_alfabeam: ALFABEAM 4 21.240885309533176 22.400849231102676 2010-Aug-20 23:50:06 LOG4 log_alfabeam: ALFABEAM 5 21.237693111978835 22.312226783374104 2010-Aug-20 23:50:06 LOG4 log_alfabeam: ALFABEAM 6 21.241315508899508 22.218755526356343 2010-Aug-20 23:50:06 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200102 2010-Aug-20 23:50:07 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:50:07 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-Aug-20 23:50:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:50:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-20 23:50:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:50:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:50:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:50:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-20 23:50:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13808.00 2010-Aug-20 23:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:50:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:50:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:50:18 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:50:18 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-Aug-20 23:50:18 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:50:18 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Aug-20 23:50:18 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-Aug-20 23:50:18 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-20 23:50:18 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-20 23:50:18 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:50:18 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:50:18 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:50:18 LOG2 antvel: Parameters to Doppler: Topocentric 100218 2010 232 0.0 2010-Aug-20 23:50:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:50:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-20 23:50:18 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-20 23:50:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:50:18 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:50:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-20 23:50:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:50:18 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-Aug-20 23:50:18 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:50:18 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Aug-20 23:50:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-Aug-20 23:50:18 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.345810 2010.6379007909347 18.999933 2010-Aug-20 23:50:18 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666655 22.306638888888884 2010-Aug-20 23:50:18 LOG4 log_alfabeam: ALFABEAM 1 21.247958695278072 22.212603442734924 2010-Aug-20 23:50:18 LOG4 log_alfabeam: ALFABEAM 2 21.251086432496869 22.299863017794916 2010-Aug-20 23:50:18 LOG4 log_alfabeam: ALFABEAM 3 21.247635814710822 22.394619469867841 2010-Aug-20 23:50:18 LOG4 log_alfabeam: ALFABEAM 4 21.240812223720024 22.400314835123130 2010-Aug-20 23:50:18 LOG4 log_alfabeam: ALFABEAM 5 21.237689272371387 22.311222045995354 2010-Aug-20 23:50:18 LOG4 log_alfabeam: ALFABEAM 6 21.241383760181108 22.218296199333292 2010-Aug-20 23:50:18 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200103 2010-Aug-20 23:50:19 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:50:19 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Aug-20 23:50:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-20 23:50:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:50:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:50:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:50:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:50:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-20 23:50:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13820.00 2010-Aug-20 23:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:50:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:50:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:50:30 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:50:30 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Aug-20 23:50:30 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:50:30 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Aug-20 23:50:30 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-Aug-20 23:50:30 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-20 23:50:30 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-20 23:50:30 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:50:30 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:50:30 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:50:30 LOG2 antvel: Parameters to Doppler: Topocentric 100230 2010 232 0.0 2010-Aug-20 23:50:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:50:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-20 23:50:30 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-20 23:50:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:50:30 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:50:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-20 23:50:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:50:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-Aug-20 23:50:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-20 23:50:30 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Aug-20 23:50:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-Aug-20 23:50:30 LOG5 log_alfabeam: Parameters: 21.244416666666666 22.306638888888887 21.349153 2010.6379011711917 18.999933 2010-Aug-20 23:50:30 LOG4 log_alfabeam: ALFABEAM 0 21.244416666666655 22.306638888888880 2010-Aug-20 23:50:30 LOG4 log_alfabeam: ALFABEAM 1 21.248031284445620 22.213137084260335 2010-Aug-20 23:50:30 LOG4 log_alfabeam: ALFABEAM 2 21.251091415147926 22.300860676232702 2010-Aug-20 23:50:30 LOG4 log_alfabeam: ALFABEAM 3 21.247567217865239 22.395094556623853 2010-Aug-20 23:50:30 LOG4 log_alfabeam: ALFABEAM 4 21.240740036199576 22.399773152295079 2010-Aug-20 23:50:30 LOG4 log_alfabeam: ALFABEAM 5 21.237686232906668 22.310223509581888 2010-Aug-20 23:50:30 LOG4 log_alfabeam: ALFABEAM 6 21.241451903492369 22.217850008627153 2010-Aug-20 23:50:30 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23200104 2010-Aug-20 23:50:31 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-20 23:50:31 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-Aug-20 23:50:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:50:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-20 23:50:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:50:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:50:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:50:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-20 23:50:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13832.00 2010-Aug-20 23:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:50:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:50:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 23:50:42 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-20 23:50:42 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-Aug-20 23:50:42 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-20 23:50:42 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Aug-20 23:50:42 INFO2 smartfreq: Switching off CAL 2010-Aug-20 23:50:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 23:50:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 23:50:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 23:50:42 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Aug-20 23:50:42 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 23:50:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 23:50:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 23:50:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 23:50:42 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Aug-20 23:50:42 INFO3 restore_frequencies: Restoring original frequencies 2010-Aug-20 23:50:42 LOG5 antvel: Calling 'antvel 211439.900000 221823.900000 J Topocentric 0' 2010-Aug-20 23:50:42 LOG2 antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:50:42 LOG2 antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:50:42 LOG2 antvel: Parameters to Doppler: Topocentric 100242 2010 232 0.0 2010-Aug-20 23:50:42 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:50:42 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-Aug-20 23:50:42 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-Aug-20 23:50:42 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:50:42 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:50:42 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-20 23:50:42 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:50:42 STOP finish_task: Finishing task 'smart frequency switching' 2010-Aug-20 23:50:42 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-20 23:50:42 DONE finish_task: DONE finished pattern: smart frequency switching 2010-Aug-20 23:50:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-20 23:50:42 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2010-Aug-20 23:50:42 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-20 23:50:42 NOTE run_command_file: DONE with command file processing 2010-Aug-20 23:50:43 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Aug-20 23:50:43 STOP finish_task: Finishing task 'running command file 'command_galfasrc_aug10.cmd'' 2010-Aug-20 23:50:43 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-20 23:50:43 DONE finish_task: DONE finished running: command file 'command_galfasrc_aug10.cmd' 2010-Aug-20 23:50:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-20 23:50:43 END end_task: Finishing task 'running command file 'command_galfasrc_aug10.cmd'' with status 'OK' 2010-Aug-20 23:50:43 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-20 23:50:43 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-20 23:50:43 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:50:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:50:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:51:01 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Aug-20 23:51:01 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Aug-20 23:51:01 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Aug-20 23:51:01 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Aug-20 23:51:01 LOG5 begin_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2010-Aug-20 23:51:01 NOTE restart_wapp: Restarting all WAPPs 2010-Aug-20 23:51:01 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Aug-20 23:51:01 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Aug-20 23:51:01 LOG5 end_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2010-Aug-20 23:51:01 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-20 23:51:01 LOG3 exec_msg: Closing socket 2010-Aug-20 23:51:01 LOG3 exec_msg: Closing socket 2010-Aug-20 23:51:01 LOG3 exec_msg: Closing socket 2010-Aug-20 23:51:01 LOG3 exec_msg: Closing socket 2010-Aug-20 23:51:04 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Aug-20 23:51:04 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Aug-20 23:51:04 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Aug-20 23:51:04 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Aug-20 23:51:21 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2010.conf' 2010-Aug-20 23:51:21 LOG2 CIMA-antvel: Precessing RA = 21:14:39.9 Dec = +22:18:23.9 Epoch = 2010.63790 J 2010-Aug-20 23:51:21 LOG2 CIMA-antvel: Computed apparent RA = 21:15:11.1 Dec = +22:21:15.9 2010-Aug-20 23:51:21 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 100281 2010 232 0.0 2010-Aug-20 23:51:21 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:51:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Aug-20 23:51:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Aug-20 23:51:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Aug-20 23:51:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Aug-20 23:51:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Aug-20 23:51:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Aug-20 23:51:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Aug-20 23:51:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Aug-20 23:51:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Aug-20 23:51:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Aug-20 23:51:23 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Aug-20 23:51:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-20 23:51:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-20 23:51:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-20 23:51:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-20 23:51:23 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2010-Aug-20 23:51:23 LOG4 exec_msg: From OBSERVER: config_iflo 2010-Aug-20 23:51:23 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Aug-20 23:51:23 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2010-Aug-20 23:51:23 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Aug-20 23:51:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Aug-20 23:51:23 LOG1 config_iflo: Receiver ALFA already selected 2010-Aug-20 23:51:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 23:51:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 23:51:23 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 23:51:23 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Aug-20 23:51:23 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 23:51:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 23:51:23 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Aug-20 23:51:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 23:51:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 23:51:23 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Aug-20 23:51:23 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Aug-20 23:51:23 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Aug-20 23:51:23 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Aug-20 23:51:23 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Aug-20 23:51:23 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Aug-20 23:51:23 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Aug-20 23:51:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-20 23:51:23 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Aug-20 23:51:23 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Aug-20 23:51:23 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Aug-20 23:51:23 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Aug-20 23:51:23 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Aug-20 23:51:23 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Aug-20 23:51:23 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Aug-20 23:51:23 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Aug-20 23:51:23 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Aug-20 23:51:23 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Aug-20 23:51:23 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Aug-20 23:51:23 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Aug-20 23:51:23 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Aug-20 23:51:23 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Aug-20 23:51:23 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Aug-20 23:51:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:51:23 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Aug-20 23:51:23 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Aug-20 23:51:23 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Aug-20 23:51:23 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Aug-20 23:51:23 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Aug-20 23:51:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Aug-20 23:51:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:51:23 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Aug-20 23:51:23 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-Aug-20 23:51:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-20 23:51:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Aug-20 23:51:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:51:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:51:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:51:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:51:23 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-Aug-20 23:51:23 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Aug-20 23:51:23 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-Aug-20 23:51:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Aug-20 23:51:23 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Aug-20 23:51:23 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2010-Aug-20 23:51:23 DONE finish_task: DONE finished configuration: IF/LO path 2010-Aug-20 23:51:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-20 23:51:24 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Aug-20 23:51:24 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2010-Aug-20 23:51:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:51:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Aug-20 23:51:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Aug-20 23:51:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Aug-20 23:51:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Aug-20 23:51:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Aug-20 23:51:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Aug-20 23:51:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Aug-20 23:51:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Aug-20 23:51:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-20 23:51:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-20 23:51:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-20 23:51:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-20 23:51:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Aug-20 23:51:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Aug-20 23:51:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Aug-20 23:51:24 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2010-Aug-20 23:51:24 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2010-Aug-20 23:51:24 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Aug-20 23:51:24 LOG5 begin_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Aug-20 23:51:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Aug-20 23:51:24 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Aug-20 23:51:24 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Aug-20 23:51:24 START begin_task: Starting task 'selecting calibration port' 2010-Aug-20 23:51:24 LOG5 begin_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2010-Aug-20 23:51:24 LOG3 vw_send: To DATATAKING: calport 3 2010-Aug-20 23:51:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Aug-20 23:51:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:51:24 START begin_task: Starting task 'waiting on calport' 2010-Aug-20 23:51:24 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Aug-20 23:51:24 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2010-Aug-20 23:51:24 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Aug-20 23:51:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:51:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:51:24 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 23:51:24 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Aug-20 23:51:24 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Aug-20 23:51:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Aug-20 23:51:24 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Aug-20 23:51:24 LOG5 end_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2010-Aug-20 23:51:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 23:51:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 23:51:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 23:51:25 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2010-Aug-20 23:51:25 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 23:51:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:51:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 23:51:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 23:51:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 23:51:25 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2010-Aug-20 23:51:25 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Aug-20 23:51:25 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Aug-20 23:51:25 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Aug-20 23:51:25 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Aug-20 23:51:25 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Aug-20 23:51:25 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Aug-20 23:51:25 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Aug-20 23:51:25 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Aug-20 23:51:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-20 23:51:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-20 23:51:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-20 23:51:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-20 23:51:25 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Aug-20 23:51:25 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Aug-20 23:51:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 23:51:25 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2010-Aug-20 23:51:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Aug-20 23:51:25 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 23:51:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Aug-20 23:51:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 23:51:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-20 23:51:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 23:51:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 23:51:25 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2010-Aug-20 23:51:25 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Aug-20 23:51:25 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Aug-20 23:51:25 LOG5 finish_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Aug-20 23:51:25 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Aug-20 23:51:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-20 23:51:25 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Aug-20 23:51:25 LOG5 end_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Aug-20 23:51:25 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-20 23:51:25 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2010-Aug-20 23:51:25 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2010-Aug-20 23:51:25 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-20 23:51:25 LOG5 begin_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Aug-20 23:51:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-20 23:51:25 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-20 23:51:25 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Aug-20 23:51:25 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-20 23:51:25 LOG5 finish_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Aug-20 23:51:25 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-20 23:51:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-20 23:51:25 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-20 23:51:25 LOG5 end_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Aug-20 23:51:26 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2010.conf' applied. 2010-Aug-20 23:51:26 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-20 23:51:26 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-20 23:52:21 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Aug-20 23:52:21 LOG4 exec_msg: From OBSERVER: track_new_source drift94p1 212400.0 +224506 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2010-Aug-20 23:52:21 LOG1 track_new_source: Calling 'track_new_source drift94p1 212400.0 +224506 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2010-Aug-20 23:52:21 BEGIN begin_task: Starting task 'selecting new source' 2010-Aug-20 23:52:21 LOG5 begin_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2010-Aug-20 23:52:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift94p1} INFO {Selecting source 'drift94p1' ...} 2010-Aug-20 23:52:21 LOG3 track_source: Calling 'track_source drift94p1 212400.0 +224506 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2010-Aug-20 23:52:21 START begin_task: Starting task 'sending tracking commands' 2010-Aug-20 23:52:21 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Aug-20 23:52:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift94p1} INFO {Slewing to source 'drift94p1' ...} 2010-Aug-20 23:52:21 INFO1 track_source: Starting to track drift94p1 2010-Aug-20 23:52:21 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift94p1" 2010-Aug-20 23:52:21 LOG3 vw_send: To DATATAKING: set ra 212400.0 2010-Aug-20 23:52:21 LOG3 vw_send: To DATATAKING: set dec +224506 2010-Aug-20 23:52:21 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-20 23:52:21 LOG3 vw_send: To DATATAKING: pnt tr 212400.0 +224506 -CJ 2010-Aug-20 23:52:21 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-20 23:52:21 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-20 23:52:21 LOG5 finish_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Aug-20 23:52:21 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-20 23:52:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 23:52:21 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-20 23:52:21 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Aug-20 23:52:21 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2010-Aug-20 23:52:21 START begin_task: Starting task 'applying pointing corrections' 2010-Aug-20 23:52:21 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Aug-20 23:52:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Aug-20 23:52:21 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Aug-20 23:52:21 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Aug-20 23:52:21 LOG5 finish_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Aug-20 23:52:21 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Aug-20 23:52:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 23:52:22 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Aug-20 23:52:22 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Aug-20 23:52:22 STOP finish_task: Finishing task 'selecting new source' 2010-Aug-20 23:52:22 LOG5 finish_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2010-Aug-20 23:52:22 DONE finish_task: DONE finished selecting: new source 2010-Aug-20 23:52:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-20 23:52:22 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Aug-20 23:52:22 LOG5 end_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2010-Aug-20 23:52:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift94p1" 2010-Aug-20 23:52:22 LOG4 got_cormsg: From DATATAKING: set ra 212400.0 2010-Aug-20 23:52:22 LOG4 got_cormsg: From DATATAKING: set dec +224506 2010-Aug-20 23:52:22 LOG4 got_cormsg: From DATATAKING: vw% 212400.0 2010-Aug-20 23:52:22 LOG4 got_cormsg: From DATATAKING: vw% +224506 2010-Aug-20 23:52:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:52:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-20 23:52:22 LOG4 got_cormsg: From DATATAKING: pnt tr 212400.0 +224506 -CJ 2010-Aug-20 23:52:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-20 23:52:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-20 23:52:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:52:22 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Aug-20 23:52:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:53:23 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2010-Aug-20 23:53:23 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2010-Aug-20 23:53:23 BEGIN begin_task: Starting task 'adjusting WAPP power' 2010-Aug-20 23:53:23 LOG5 begin_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2010-Aug-20 23:53:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Aug-20 23:53:23 INFO2 adjust_power: Starting to adjust WAPP power 2010-Aug-20 23:53:23 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Aug-20 23:53:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Aug-20 23:53:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:53:23 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Aug-20 23:53:23 LOG5 begin_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Aug-20 23:53:23 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Aug-20 23:53:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:53:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:53:25 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 23:53:25 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Aug-20 23:53:25 LOG5 end_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Aug-20 23:53:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Aug-20 23:53:25 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-20 23:53:25 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-Aug-20 23:53:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Aug-20 23:53:25 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-20 23:53:25 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-20 23:53:26 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-20 23:53:26 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-20 23:53:26 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Aug-20 23:53:26 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2010-Aug-20 23:53:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Aug-20 23:53:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:53:26 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Aug-20 23:53:26 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 5 dB 2010-Aug-20 23:53:26 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 3 3 dB 2010-Aug-20 23:53:26 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Aug-20 23:53:26 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Aug-20 23:53:26 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Aug-20 23:53:26 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2010-Aug-20 23:53:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.871 0.936 ALFA beam 1: 0.941 0.995 2010-Aug-20 23:53:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.978 0.910 ALFA beam 3: 1.053 0.959 2010-Aug-20 23:53:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.094 0.867 ALFA beam 5: 1.093 1.113 2010-Aug-20 23:53:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.893 0.833 ALFA beam 7: 0.983 0.985 2010-Aug-20 23:53:26 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-20 23:53:26 LOG5 finish_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-Aug-20 23:53:26 INFO2 finish_task: DONE finished adjusting: WAPP power 2010-Aug-20 23:53:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 23:53:26 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-20 23:53:26 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-Aug-20 23:53:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2010-Aug-20 23:53:26 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-20 23:53:26 LOG5 finish_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2010-Aug-20 23:53:26 DONE finish_task: DONE finished adjusting: WAPP power levels 2010-Aug-20 23:53:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-20 23:53:26 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-20 23:53:26 LOG5 end_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2010-Aug-20 23:53:31 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2010-Aug-20 23:53:31 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift94p1 212400.0 +224506 J 0 Topocentric velocity(optical) 2010-Aug-20 23:53:31 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift94p1 212400.0 +224506 J 0 Topocentric velocity(optical)' 2010-Aug-20 23:53:31 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Aug-20 23:53:31 LOG5 begin_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2010-Aug-20 23:53:31 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift94p1' 2010-Aug-20 23:53:31 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Aug-20 23:53:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift94p1} 2010-Aug-20 23:53:31 INFO5 fixed_driftmap: Start: year = 2010.6379069067357 RA = 21:24:31.3 Dec = +22:48:03.5 2010-Aug-20 23:53:31 NOTE fixed_driftmap: Setting ZA to 4:26:49.8 ... 2010-Aug-20 23:53:31 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 4.45 2010-Aug-20 23:53:31 LOG3 track_source: Calling 'track_source drift94p1 180.0 4.4471788524 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-Aug-20 23:53:31 START begin_task: Starting task 'sending tracking commands' 2010-Aug-20 23:53:31 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-Aug-20 23:53:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift94p1} INFO {Slewing to source 'drift94p1' ...} 2010-Aug-20 23:53:31 INFO1 track_source: Starting to track drift94p1 2010-Aug-20 23:53:31 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift94p1" 2010-Aug-20 23:53:31 LOG3 vw_send: To DATATAKING: set ra 180.0 2010-Aug-20 23:53:31 LOG3 vw_send: To DATATAKING: set dec 4.4471788524 2010-Aug-20 23:53:31 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-20 23:53:31 LOG3 vw_send: To DATATAKING: pnt tr 180.0 4.4471788524 -CF 2010-Aug-20 23:53:31 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-20 23:53:31 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-20 23:53:31 LOG5 finish_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-Aug-20 23:53:31 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-20 23:53:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 23:53:31 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-20 23:53:31 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-Aug-20 23:53:31 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-20 23:53:31 LOG5 begin_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2010-Aug-20 23:53:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-20 23:53:32 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-20 23:53:32 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2010-Aug-20 23:53:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Aug-20 23:53:32 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Aug-20 23:53:32 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-Aug-20 23:53:32 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift94p1" 2010-Aug-20 23:53:32 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2010-Aug-20 23:53:32 LOG4 got_cormsg: From DATATAKING: set dec 4.4471788524 2010-Aug-20 23:53:32 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2010-Aug-20 23:53:32 LOG4 got_cormsg: From DATATAKING: vw% 4.4471788524 2010-Aug-20 23:53:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:53:32 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-20 23:53:32 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 4.4471788524 -CF 2010-Aug-20 23:53:32 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-20 23:53:32 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-20 23:53:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:53:32 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-20 23:53:32 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-20 23:53:32 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Aug-20 23:53:32 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-Aug-20 23:53:32 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-20 23:53:32 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-20 23:53:32 LOG5 finish_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2010-Aug-20 23:53:32 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-20 23:53:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 23:53:32 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-20 23:53:32 LOG5 end_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2010-Aug-20 23:53:32 START begin_task: Starting task 'waiting on telescope' 2010-Aug-20 23:53:32 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Aug-20 23:53:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-20 23:53:32 LOG3 waittrk: Start waittrk 5 2010-Aug-20 23:53:32 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-20 23:53:32 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-Aug-20 23:53:38 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-20 23:53:38 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-Aug-20 23:53:38 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-20 23:53:38 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-Aug-20 23:53:45 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-20 23:53:45 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-Aug-20 23:53:45 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-20 23:53:45 INFO2 waittrk: Now tracking drift94p1 2010-Aug-20 23:53:45 LOG4 waittrk: Current telescope position: Az = 179.71 ZA = 4.47 2010-Aug-20 23:53:45 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-20 23:53:45 LOG5 finish_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Aug-20 23:53:45 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-20 23:53:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 23:53:45 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-20 23:53:45 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Aug-20 23:53:45 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 23:53:45 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Aug-20 23:53:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 23:53:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 23:53:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:53:45 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 23:53:45 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2010-Aug-20 23:53:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 23:53:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:53:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:53:45 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 23:53:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 23:53:45 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2010-Aug-20 23:53:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 23:53:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 23:53:45 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 23:53:45 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 23:53:45 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Aug-20 23:53:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:53:46 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 23:53:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 23:53:46 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Aug-20 23:53:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 23:53:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 23:53:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 23:53:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 23:53:46 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 23:53:46 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2010-Aug-20 23:53:46 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 23:53:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 23:53:46 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2010-Aug-20 23:53:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 23:53:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 23:53:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 23:53:46 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Aug-20 23:53:46 LOG5 dopset_later: Calling 'dopset_later 17.742141824662628' 2010-Aug-20 23:53:46 INFO3 dopset_later: Setting Doppler correction for 23:54:04 (17.7 seconds from now) 2010-Aug-20 23:53:46 LOG5 antvel: Calling 'antvel 180.000000 4.447179 F Topocentric 17.742141824662628' 2010-Aug-20 23:53:46 LOG2 antvel: Transforming current Az = 180.00 ZA = 4.45 to apparent RA = 21:24:31.2 Dec = +22:48:03.5 2010-Aug-20 23:53:46 LOG2 antvel: Parameters to Doppler: Topocentric 100444 2010 232 0.0 2010-Aug-20 23:53:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-20 23:53:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-Aug-20 23:53:46 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-Aug-20 23:53:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-20 23:53:46 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-20 23:53:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-20 23:53:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:53:46 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-20 23:53:46 LOG5 begin_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2010-Aug-20 23:53:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Aug-20 23:53:46 INFO2 adjust_power: Starting to adjust WAPP power 2010-Aug-20 23:53:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Aug-20 23:53:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Aug-20 23:53:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:53:47 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Aug-20 23:53:47 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Aug-20 23:53:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-20 23:53:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-20 23:53:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Aug-20 23:53:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 23:53:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:53:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:53:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:53:47 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 23:53:47 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Aug-20 23:53:47 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Aug-20 23:53:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Aug-20 23:53:47 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-20 23:53:47 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Aug-20 23:53:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Aug-20 23:53:47 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-20 23:53:47 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-20 23:53:47 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-20 23:53:47 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-20 23:53:47 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Aug-20 23:53:47 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2010-Aug-20 23:53:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Aug-20 23:53:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 23:53:47 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2010-Aug-20 23:53:47 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 5 dB 2010-Aug-20 23:53:47 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 3 3 dB 2010-Aug-20 23:53:47 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Aug-20 23:53:47 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Aug-20 23:53:47 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Aug-20 23:53:47 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2010-Aug-20 23:53:47 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.105 0.931 ALFA beam 1: 0.939 0.994 2010-Aug-20 23:53:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.994 0.909 ALFA beam 3: 1.069 0.976 2010-Aug-20 23:53:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.111 0.888 ALFA beam 5: 1.091 1.111 2010-Aug-20 23:53:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.912 0.853 ALFA beam 7: 0.993 1.007 2010-Aug-20 23:53:48 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-20 23:53:48 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Aug-20 23:53:48 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Aug-20 23:53:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 23:53:48 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-20 23:53:48 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Aug-20 23:53:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 23:53:48 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-20 23:53:48 LOG5 finish_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2010-Aug-20 23:53:48 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Aug-20 23:53:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 23:53:48 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-20 23:53:48 LOG5 end_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2010-Aug-20 23:53:48 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 21:24:31.3 LST = 21:24:14.5 diff = 16.8 secs 2010-Aug-20 23:53:48 INFO2 fixed_driftmap: Waiting 14.8 seconds for RA 21:24:31 2010-Aug-20 23:53:48 INFO2 lstwait: Waiting for 14.7 secs from LST 21:24:14 to LST 21:24:29 ... 2010-Aug-20 23:53:48 LOG4 send_obs_status: To obs_status: <1> TASKTIME 14.745945038432177 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Aug-20 23:53:48 START begin_task: Starting task 'waiting on wait on LST' 2010-Aug-20 23:53:48 LOG5 begin_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2010-Aug-20 23:54:03 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Aug-20 23:54:03 LOG5 end_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2010-Aug-20 23:54:03 LOG4 lstwait: Finished waiting 0.25 seconds late 2010-Aug-20 23:54:03 INFO3 lstwait: Finished waiting 2010-Aug-20 23:54:03 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Aug-20 23:54:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-20 23:54:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-20 23:54:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-20 23:54:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-20 23:54:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2010-Aug-20 23:54:03 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Aug-20 23:54:03 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 23:54:03 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 23:54:03 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 23:54:03 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2010-Aug-20 23:54:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 23:54:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 23:54:03 INFO2 take_data: Starting WAPP 600-second scan: 23200105 2010-Aug-20 23:54:03 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 23:54:03 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2010-Aug-20 23:54:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-20 23:54:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 23:54:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 23:54:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14044.00 2010-Aug-20 23:54:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0035.fits 2010-Aug-20 23:54:03 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0035.fits} 2010-Aug-20 23:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 23:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-20 23:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-20 23:54:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:04:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 00:04:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 00:04:04 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2010-Aug-21 00:04:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 00:04:04 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2010-Aug-21 00:04:04 LOG1 fixed_driftmap: New position: year = 2010.6379269652953 RA = 21:34:02.8 RA/Dec = 21:34:34.3 +22:48:09.2 2010-Aug-21 00:04:04 NOTE fixed_driftmap: Correcting ZA to 4:26:55.5 ... 2010-Aug-21 00:04:04 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4487481073 -CF 2010-Aug-21 00:04:04 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 00:04:04 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 00:04:04 LOG5 begin_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2010-Aug-21 00:04:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 00:04:04 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 00:04:04 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2010-Aug-21 00:04:04 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 00:04:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 00:04:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 00:04:04 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 00:04:04 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-Aug-21 00:04:04 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4487481073 -CF 2010-Aug-21 00:04:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:04:04 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 00:04:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 00:04:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:04:05 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 00:04:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 00:04:05 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-Aug-21 00:04:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 00:04:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 00:04:05 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 00:04:05 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 00:04:05 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2010-Aug-21 00:04:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:04:05 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 00:04:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 00:04:05 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2010-Aug-21 00:04:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 00:04:05 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 00:04:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 00:04:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 00:04:05 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 00:04:05 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-Aug-21 00:04:05 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 00:04:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 00:04:05 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-Aug-21 00:04:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 00:04:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 00:04:05 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 00:04:05 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2010-Aug-21 00:04:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 00:04:05 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 00:04:05 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 00:04:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 00:04:05 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2010-Aug-21 00:04:05 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 00:04:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 00:04:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 00:04:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 00:04:05 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2010-Aug-21 00:04:05 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 00:04:05 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 00:04:05 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Aug-21 00:04:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 00:04:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 00:04:06 INFO2 take_data: Starting WAPP 1-second scan: 23300001 2010-Aug-21 00:04:06 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 00:04:06 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-Aug-21 00:04:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 00:04:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 00:04:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14647.00 2010-Aug-21 00:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 00:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:04:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:04:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 00:04:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 00:04:08 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-Aug-21 00:04:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 00:04:08 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Aug-21 00:04:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 00:04:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 00:04:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 00:04:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 00:04:08 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2010-Aug-21 00:04:08 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 00:04:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 00:04:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 00:04:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 00:04:08 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2010-Aug-21 00:04:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 00:04:08 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 00:04:08 LOG5 finish_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2010-Aug-21 00:04:08 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 00:04:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 00:04:08 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 00:04:08 LOG5 end_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2010-Aug-21 00:04:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2010-Aug-21 00:04:08 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Aug-21 00:04:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 00:04:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 00:04:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 00:04:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 00:04:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 00:04:09 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 00:04:09 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 00:04:09 LOG5 begin_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2010-Aug-21 00:04:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 00:04:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 00:04:09 INFO2 take_data: Starting WAPP 600-second scan: 23300002 2010-Aug-21 00:04:09 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 00:04:09 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Aug-21 00:04:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 00:04:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 00:04:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 00:04:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14650.00 2010-Aug-21 00:04:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0000.fits 2010-Aug-21 00:04:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0000.fits} 2010-Aug-21 00:04:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 00:04:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:04:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:04:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:04:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:04:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:04:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:04:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:04:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:14:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 00:14:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 00:14:10 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Aug-21 00:14:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 00:14:10 LOG5 end_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2010-Aug-21 00:14:10 LOG1 fixed_driftmap: New position: year = 2010.6379461682764 RA = 21:44:10.2 RA/Dec = 21:44:41.9 +22:48:14.5 2010-Aug-21 00:14:10 NOTE fixed_driftmap: Correcting ZA to 4:27:00.8 ... 2010-Aug-21 00:14:10 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4502339797 -CF 2010-Aug-21 00:14:10 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 00:14:10 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 00:14:10 LOG5 begin_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2010-Aug-21 00:14:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 00:14:10 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 00:14:10 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2010-Aug-21 00:14:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 00:14:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 00:14:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 00:14:10 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 00:14:10 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2010-Aug-21 00:14:10 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4502339797 -CF 2010-Aug-21 00:14:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:14:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 00:14:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 00:14:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:14:10 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 00:14:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 00:14:10 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2010-Aug-21 00:14:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 00:14:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 00:14:10 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 00:14:10 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 00:14:10 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2010-Aug-21 00:14:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:14:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 00:14:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 00:14:11 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2010-Aug-21 00:14:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 00:14:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 00:14:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 00:14:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 00:14:11 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 00:14:11 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2010-Aug-21 00:14:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 00:14:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 00:14:11 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2010-Aug-21 00:14:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 00:14:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 00:14:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 00:14:11 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2010-Aug-21 00:14:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 00:14:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 00:14:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 00:14:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 00:14:11 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2010-Aug-21 00:14:11 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 00:14:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 00:14:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 00:14:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 00:14:11 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2010-Aug-21 00:14:11 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 00:14:11 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 00:14:11 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2010-Aug-21 00:14:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 00:14:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 00:14:11 INFO2 take_data: Starting WAPP 1-second scan: 23300003 2010-Aug-21 00:14:11 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 00:14:11 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-Aug-21 00:14:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 00:14:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 00:14:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15252.00 2010-Aug-21 00:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 00:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:14:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:14:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 00:14:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 00:14:13 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-Aug-21 00:14:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 00:14:13 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2010-Aug-21 00:14:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 00:14:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 00:14:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 00:14:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 00:14:13 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2010-Aug-21 00:14:13 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 00:14:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 00:14:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 00:14:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 00:14:13 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2010-Aug-21 00:14:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 00:14:13 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 00:14:13 LOG5 finish_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2010-Aug-21 00:14:13 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 00:14:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 00:14:13 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 00:14:13 LOG5 end_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2010-Aug-21 00:14:13 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2010-Aug-21 00:14:13 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2010-Aug-21 00:14:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 00:14:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 00:14:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 00:14:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 00:14:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 00:14:14 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 00:14:14 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 00:14:14 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2010-Aug-21 00:14:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 00:14:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 00:14:14 INFO2 take_data: Starting WAPP 600-second scan: 23300004 2010-Aug-21 00:14:14 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 00:14:14 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-Aug-21 00:14:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 00:14:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 00:14:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 00:14:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15255.00 2010-Aug-21 00:14:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0001.fits 2010-Aug-21 00:14:14 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0001.fits} 2010-Aug-21 00:14:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 00:14:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:14:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:14:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:14:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:14:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:14:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:14:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:14:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:24:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 00:24:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 00:24:15 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-Aug-21 00:24:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 00:24:15 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2010-Aug-21 00:24:15 LOG1 fixed_driftmap: New position: year = 2010.6379653395695 RA = 21:54:16.7 RA/Dec = 21:54:48.6 +22:48:19.5 2010-Aug-21 00:24:15 NOTE fixed_driftmap: Correcting ZA to 4:27:05.8 ... 2010-Aug-21 00:24:15 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4516188848 -CF 2010-Aug-21 00:24:15 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 00:24:15 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 00:24:15 LOG5 begin_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2010-Aug-21 00:24:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 00:24:15 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 00:24:15 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2010-Aug-21 00:24:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 00:24:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 00:24:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 00:24:15 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 00:24:15 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2010-Aug-21 00:24:15 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4516188848 -CF 2010-Aug-21 00:24:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:24:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 00:24:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 00:24:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:24:15 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 00:24:15 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 00:24:15 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2010-Aug-21 00:24:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 00:24:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 00:24:15 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 00:24:15 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 00:24:15 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-Aug-21 00:24:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:24:16 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 00:24:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 00:24:16 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-Aug-21 00:24:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 00:24:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 00:24:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 00:24:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 00:24:16 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 00:24:16 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2010-Aug-21 00:24:16 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 00:24:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 00:24:16 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2010-Aug-21 00:24:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 00:24:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 00:24:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 00:24:16 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2010-Aug-21 00:24:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 00:24:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 00:24:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 00:24:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 00:24:16 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2010-Aug-21 00:24:16 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 00:24:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 00:24:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 00:24:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 00:24:16 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2010-Aug-21 00:24:16 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 00:24:16 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 00:24:16 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Aug-21 00:24:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 00:24:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 00:24:16 INFO2 take_data: Starting WAPP 1-second scan: 23300005 2010-Aug-21 00:24:16 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 00:24:16 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-Aug-21 00:24:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 00:24:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 00:24:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15857.00 2010-Aug-21 00:24:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 00:24:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:24:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:24:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:24:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:24:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:24:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:24:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:24:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:24:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 00:24:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 00:24:18 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-Aug-21 00:24:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 00:24:18 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Aug-21 00:24:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 00:24:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 00:24:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 00:24:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 00:24:18 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-Aug-21 00:24:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 00:24:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 00:24:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 00:24:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 00:24:19 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-Aug-21 00:24:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 00:24:19 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 00:24:19 LOG5 finish_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2010-Aug-21 00:24:19 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 00:24:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 00:24:19 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 00:24:19 LOG5 end_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2010-Aug-21 00:24:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2010-Aug-21 00:24:19 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2010-Aug-21 00:24:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 00:24:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 00:24:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 00:24:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 00:24:19 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 00:24:19 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 00:24:19 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 00:24:19 LOG5 begin_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2010-Aug-21 00:24:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 00:24:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 00:24:19 INFO2 take_data: Starting WAPP 600-second scan: 23300006 2010-Aug-21 00:24:19 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 00:24:19 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-Aug-21 00:24:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 00:24:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 00:24:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 00:24:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15860.00 2010-Aug-21 00:24:19 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0002.fits 2010-Aug-21 00:24:19 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0002.fits} 2010-Aug-21 00:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 00:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:24:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:33:43 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 00:33:43.298 (seconds: 2023.298)!} 2010-Aug-21 00:33:43 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 00:33:43.298 (seconds: 2023.298)! 2010-Aug-21 00:33:44 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 2022.0 to 2023.0! 2010-Aug-21 00:33:45 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (2022.0 - 2024.0)! 2010-Aug-21 00:34:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 00:34:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 00:34:20 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-Aug-21 00:34:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 00:34:20 LOG5 end_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2010-Aug-21 00:34:20 LOG1 fixed_driftmap: New position: year = 2010.6379845108627 RA = 22:04:23.1 RA/Dec = 22:04:55.3 +22:48:24.2 2010-Aug-21 00:34:20 NOTE fixed_driftmap: Correcting ZA to 4:27:10.4 ... 2010-Aug-21 00:34:20 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4529026816 -CF 2010-Aug-21 00:34:20 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 00:34:20 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 00:34:20 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2010-Aug-21 00:34:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 00:34:20 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 00:34:20 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2010-Aug-21 00:34:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 00:34:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 00:34:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 00:34:20 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 00:34:20 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2010-Aug-21 00:34:20 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4529026816 -CF 2010-Aug-21 00:34:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:34:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 00:34:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 00:34:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:34:21 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 00:34:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 00:34:21 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2010-Aug-21 00:34:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 00:34:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 00:34:21 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 00:34:21 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 00:34:21 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-Aug-21 00:34:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:34:21 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 00:34:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 00:34:21 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-Aug-21 00:34:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 00:34:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 00:34:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 00:34:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 00:34:21 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 00:34:21 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-Aug-21 00:34:21 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 00:34:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 00:34:21 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-Aug-21 00:34:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 00:34:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 00:34:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 00:34:21 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2010-Aug-21 00:34:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 00:34:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 00:34:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 00:34:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 00:34:21 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2010-Aug-21 00:34:21 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 00:34:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 00:34:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 00:34:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 00:34:21 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2010-Aug-21 00:34:21 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 00:34:21 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 00:34:21 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Aug-21 00:34:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 00:34:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 00:34:21 INFO2 take_data: Starting WAPP 1-second scan: 23300007 2010-Aug-21 00:34:22 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 00:34:22 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Aug-21 00:34:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 00:34:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 00:34:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16463.00 2010-Aug-21 00:34:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 00:34:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:34:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:34:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:34:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:34:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:34:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:34:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:34:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:34:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 00:34:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 00:34:24 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Aug-21 00:34:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 00:34:24 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Aug-21 00:34:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 00:34:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 00:34:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 00:34:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 00:34:24 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-Aug-21 00:34:24 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 00:34:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 00:34:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 00:34:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 00:34:24 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-Aug-21 00:34:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 00:34:24 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 00:34:24 LOG5 finish_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2010-Aug-21 00:34:24 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 00:34:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 00:34:24 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 00:34:24 LOG5 end_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2010-Aug-21 00:34:24 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2010-Aug-21 00:34:24 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2010-Aug-21 00:34:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 00:34:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 00:34:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 00:34:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 00:34:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 00:34:25 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 00:34:25 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 00:34:25 LOG5 begin_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2010-Aug-21 00:34:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 00:34:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 00:34:25 INFO2 take_data: Starting WAPP 600-second scan: 23300008 2010-Aug-21 00:34:25 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 00:34:25 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Aug-21 00:34:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 00:34:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 00:34:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 00:34:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16466.00 2010-Aug-21 00:34:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0003.fits 2010-Aug-21 00:34:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0003.fits} 2010-Aug-21 00:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 00:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:34:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:44:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 00:44:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 00:44:26 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Aug-21 00:44:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 00:44:26 LOG5 end_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2010-Aug-21 00:44:26 LOG1 fixed_driftmap: New position: year = 2010.638003713844 RA = 22:14:30.5 RA/Dec = 22:15:02.9 +22:48:28.4 2010-Aug-21 00:44:26 NOTE fixed_driftmap: Correcting ZA to 4:27:14.7 ... 2010-Aug-21 00:44:26 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4540847319 -CF 2010-Aug-21 00:44:26 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 00:44:26 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 00:44:26 LOG5 begin_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2010-Aug-21 00:44:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 00:44:26 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 00:44:26 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2010-Aug-21 00:44:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 00:44:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 00:44:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 00:44:26 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 00:44:26 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-Aug-21 00:44:26 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4540847319 -CF 2010-Aug-21 00:44:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:44:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 00:44:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 00:44:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:44:26 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 00:44:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 00:44:26 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-Aug-21 00:44:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 00:44:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 00:44:26 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 00:44:26 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 00:44:26 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2010-Aug-21 00:44:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:44:27 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 00:44:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 00:44:27 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2010-Aug-21 00:44:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 00:44:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 00:44:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 00:44:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 00:44:27 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 00:44:27 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2010-Aug-21 00:44:27 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 00:44:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 00:44:27 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2010-Aug-21 00:44:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 00:44:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 00:44:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 00:44:27 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2010-Aug-21 00:44:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 00:44:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 00:44:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 00:44:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 00:44:27 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2010-Aug-21 00:44:27 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 00:44:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 00:44:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 00:44:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 00:44:27 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2010-Aug-21 00:44:27 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 00:44:27 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 00:44:27 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Aug-21 00:44:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 00:44:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 00:44:27 INFO2 take_data: Starting WAPP 1-second scan: 23300009 2010-Aug-21 00:44:27 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 00:44:27 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-Aug-21 00:44:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 00:44:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 00:44:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17068.00 2010-Aug-21 00:44:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 00:44:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:44:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:44:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:44:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:44:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:44:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:44:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:44:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:44:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 00:44:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 00:44:29 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-Aug-21 00:44:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 00:44:29 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Aug-21 00:44:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 00:44:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 00:44:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 00:44:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 00:44:29 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2010-Aug-21 00:44:29 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 00:44:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 00:44:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 00:44:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 00:44:29 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2010-Aug-21 00:44:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 00:44:29 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 00:44:29 LOG5 finish_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2010-Aug-21 00:44:29 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 00:44:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 00:44:29 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 00:44:29 LOG5 end_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2010-Aug-21 00:44:29 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2010-Aug-21 00:44:29 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2010-Aug-21 00:44:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 00:44:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 00:44:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 00:44:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 00:44:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 00:44:30 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 00:44:30 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 00:44:30 LOG5 begin_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2010-Aug-21 00:44:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 00:44:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 00:44:30 INFO2 take_data: Starting WAPP 600-second scan: 23300010 2010-Aug-21 00:44:30 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 00:44:30 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Aug-21 00:44:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 00:44:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 00:44:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 00:44:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17071.00 2010-Aug-21 00:44:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0004.fits 2010-Aug-21 00:44:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0004.fits} 2010-Aug-21 00:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 00:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:54:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 00:54:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 00:54:31 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Aug-21 00:54:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 00:54:31 LOG5 end_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2010-Aug-21 00:54:31 LOG1 fixed_driftmap: New position: year = 2010.6380228851372 RA = 22:24:36.9 RA/Dec = 22:25:09.6 +22:48:32.3 2010-Aug-21 00:54:31 NOTE fixed_driftmap: Correcting ZA to 4:27:18.6 ... 2010-Aug-21 00:54:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4551588282 -CF 2010-Aug-21 00:54:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 00:54:31 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 00:54:31 LOG5 begin_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2010-Aug-21 00:54:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 00:54:31 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 00:54:31 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2010-Aug-21 00:54:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 00:54:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 00:54:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 00:54:31 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 00:54:31 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2010-Aug-21 00:54:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4551588282 -CF 2010-Aug-21 00:54:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:54:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 00:54:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 00:54:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:54:31 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 00:54:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 00:54:31 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2010-Aug-21 00:54:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 00:54:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 00:54:31 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 00:54:31 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 00:54:31 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2010-Aug-21 00:54:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 00:54:32 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 00:54:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 00:54:32 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2010-Aug-21 00:54:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 00:54:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 00:54:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 00:54:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 00:54:32 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 00:54:32 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2010-Aug-21 00:54:32 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 00:54:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 00:54:32 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2010-Aug-21 00:54:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 00:54:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 00:54:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 00:54:32 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2010-Aug-21 00:54:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 00:54:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 00:54:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 00:54:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 00:54:32 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2010-Aug-21 00:54:32 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 00:54:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 00:54:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 00:54:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 00:54:32 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2010-Aug-21 00:54:32 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 00:54:32 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 00:54:32 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Aug-21 00:54:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 00:54:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 00:54:32 INFO2 take_data: Starting WAPP 1-second scan: 23300011 2010-Aug-21 00:54:32 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 00:54:32 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2010-Aug-21 00:54:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 00:54:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 00:54:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17673.00 2010-Aug-21 00:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 00:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:54:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:54:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 00:54:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 00:54:34 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2010-Aug-21 00:54:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 00:54:34 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Aug-21 00:54:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 00:54:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 00:54:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 00:54:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 00:54:34 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-Aug-21 00:54:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 00:54:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 00:54:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 00:54:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 00:54:34 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-Aug-21 00:54:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 00:54:34 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 00:54:34 LOG5 finish_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2010-Aug-21 00:54:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 00:54:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 00:54:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 00:54:34 LOG5 end_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2010-Aug-21 00:54:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2010-Aug-21 00:54:34 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2010-Aug-21 00:54:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 00:54:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 00:54:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 00:54:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 00:54:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 00:54:35 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 00:54:35 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 00:54:35 LOG5 begin_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2010-Aug-21 00:54:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 00:54:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 00:54:35 INFO2 take_data: Starting WAPP 600-second scan: 23300012 2010-Aug-21 00:54:35 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 00:54:35 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2010-Aug-21 00:54:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 00:54:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 00:54:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 00:54:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17676.00 2010-Aug-21 00:54:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0005.fits 2010-Aug-21 00:54:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0005.fits} 2010-Aug-21 00:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 00:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 00:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 00:54:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:03:41 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 01:03:41.301 (seconds: 3821.301)!} 2010-Aug-21 01:03:41 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 01:03:41.301 (seconds: 3821.301)! 2010-Aug-21 01:03:42 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 3820.0 to 3821.0! 2010-Aug-21 01:03:43 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (3820.0 - 3822.0)! 2010-Aug-21 01:04:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 01:04:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 01:04:36 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2010-Aug-21 01:04:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 01:04:36 LOG5 end_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2010-Aug-21 01:04:36 LOG1 fixed_driftmap: New position: year = 2010.6380420564301 RA = 22:34:43.3 RA/Dec = 22:35:16.2 +22:48:35.8 2010-Aug-21 01:04:36 NOTE fixed_driftmap: Correcting ZA to 4:27:22.0 ... 2010-Aug-21 01:04:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4561249279 -CF 2010-Aug-21 01:04:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 01:04:36 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 01:04:36 LOG5 begin_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2010-Aug-21 01:04:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 01:04:36 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 01:04:36 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2010-Aug-21 01:04:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 01:04:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 01:04:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 01:04:36 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 01:04:36 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2010-Aug-21 01:04:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4561249279 -CF 2010-Aug-21 01:04:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:04:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 01:04:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 01:04:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:04:36 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 01:04:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 01:04:36 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2010-Aug-21 01:04:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 01:04:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 01:04:36 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 01:04:36 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 01:04:36 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2010-Aug-21 01:04:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:04:37 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 01:04:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 01:04:37 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2010-Aug-21 01:04:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 01:04:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 01:04:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 01:04:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 01:04:37 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 01:04:37 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2010-Aug-21 01:04:37 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 01:04:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 01:04:37 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2010-Aug-21 01:04:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 01:04:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 01:04:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 01:04:37 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2010-Aug-21 01:04:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 01:04:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 01:04:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 01:04:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 01:04:37 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2010-Aug-21 01:04:37 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 01:04:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 01:04:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 01:04:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 01:04:37 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2010-Aug-21 01:04:37 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 01:04:37 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 01:04:37 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Aug-21 01:04:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 01:04:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 01:04:37 INFO2 take_data: Starting WAPP 1-second scan: 23300013 2010-Aug-21 01:04:37 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 01:04:37 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2010-Aug-21 01:04:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 01:04:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 01:04:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18278.00 2010-Aug-21 01:04:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 01:04:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:04:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:04:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:04:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:04:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:04:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:04:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:04:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:04:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 01:04:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 01:04:39 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2010-Aug-21 01:04:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 01:04:39 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Aug-21 01:04:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 01:04:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 01:04:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 01:04:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 01:04:39 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2010-Aug-21 01:04:40 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 01:04:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 01:04:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 01:04:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 01:04:40 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2010-Aug-21 01:04:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 01:04:40 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 01:04:40 LOG5 finish_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2010-Aug-21 01:04:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 01:04:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 01:04:40 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 01:04:40 LOG5 end_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2010-Aug-21 01:04:40 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2010-Aug-21 01:04:40 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2010-Aug-21 01:04:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 01:04:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 01:04:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 01:04:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 01:04:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 01:04:40 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 01:04:40 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 01:04:40 LOG5 begin_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2010-Aug-21 01:04:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 01:04:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 01:04:40 INFO2 take_data: Starting WAPP 600-second scan: 23300014 2010-Aug-21 01:04:40 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 01:04:40 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Aug-21 01:04:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 01:04:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 01:04:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 01:04:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18281.00 2010-Aug-21 01:04:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0006.fits 2010-Aug-21 01:04:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0006.fits} 2010-Aug-21 01:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 01:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:04:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:14:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 01:14:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 01:14:41 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Aug-21 01:14:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 01:14:41 LOG5 end_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2010-Aug-21 01:14:41 LOG1 fixed_driftmap: New position: year = 2010.6380612277233 RA = 22:44:49.8 RA/Dec = 22:45:22.9 +22:48:38.8 2010-Aug-21 01:14:41 NOTE fixed_driftmap: Correcting ZA to 4:27:25.1 ... 2010-Aug-21 01:14:41 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4569811457 -CF 2010-Aug-21 01:14:41 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 01:14:41 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 01:14:41 LOG5 begin_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2010-Aug-21 01:14:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 01:14:41 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 01:14:41 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2010-Aug-21 01:14:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 01:14:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 01:14:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 01:14:41 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 01:14:41 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2010-Aug-21 01:14:41 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4569811457 -CF 2010-Aug-21 01:14:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:14:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 01:14:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 01:14:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:14:42 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 01:14:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 01:14:42 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2010-Aug-21 01:14:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 01:14:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 01:14:42 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 01:14:42 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 01:14:42 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2010-Aug-21 01:14:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:14:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 01:14:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 01:14:42 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2010-Aug-21 01:14:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 01:14:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 01:14:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 01:14:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 01:14:42 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 01:14:42 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2010-Aug-21 01:14:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 01:14:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 01:14:42 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2010-Aug-21 01:14:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 01:14:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 01:14:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 01:14:42 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2010-Aug-21 01:14:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 01:14:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 01:14:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 01:14:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 01:14:42 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2010-Aug-21 01:14:42 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 01:14:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 01:14:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 01:14:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 01:14:42 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2010-Aug-21 01:14:42 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 01:14:42 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 01:14:42 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-Aug-21 01:14:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 01:14:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 01:14:42 INFO2 take_data: Starting WAPP 1-second scan: 23300015 2010-Aug-21 01:14:43 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 01:14:43 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2010-Aug-21 01:14:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 01:14:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 01:14:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18884.00 2010-Aug-21 01:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 01:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:14:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:14:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 01:14:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 01:14:45 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2010-Aug-21 01:14:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 01:14:45 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-Aug-21 01:14:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 01:14:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 01:14:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 01:14:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 01:14:45 LOG5 begin_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2010-Aug-21 01:14:45 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 01:14:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 01:14:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 01:14:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 01:14:45 LOG5 end_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2010-Aug-21 01:14:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 01:14:45 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 01:14:45 LOG5 finish_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2010-Aug-21 01:14:45 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 01:14:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 01:14:45 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 01:14:45 LOG5 end_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2010-Aug-21 01:14:45 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2010-Aug-21 01:14:45 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2010-Aug-21 01:14:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 01:14:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 01:14:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 01:14:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 01:14:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 01:14:46 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 01:14:46 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 01:14:46 LOG5 begin_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2010-Aug-21 01:14:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 01:14:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 01:14:46 INFO2 take_data: Starting WAPP 600-second scan: 23300016 2010-Aug-21 01:14:46 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 01:14:46 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Aug-21 01:14:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 01:14:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 01:14:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 01:14:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18887.00 2010-Aug-21 01:14:46 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0007.fits 2010-Aug-21 01:14:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0007.fits} 2010-Aug-21 01:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 01:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:14:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:24:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 01:24:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 01:24:47 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Aug-21 01:24:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 01:24:47 LOG5 end_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2010-Aug-21 01:24:47 LOG1 fixed_driftmap: New position: year = 2010.6380804307046 RA = 22:54:57.2 RA/Dec = 22:55:30.6 +22:48:41.5 2010-Aug-21 01:24:47 NOTE fixed_driftmap: Correcting ZA to 4:27:27.8 ... 2010-Aug-21 01:24:47 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4577269569 -CF 2010-Aug-21 01:24:47 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 01:24:47 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 01:24:47 LOG5 begin_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2010-Aug-21 01:24:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 01:24:47 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 01:24:47 LOG5 begin_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2010-Aug-21 01:24:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 01:24:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 01:24:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 01:24:47 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 01:24:47 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2010-Aug-21 01:24:47 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4577269569 -CF 2010-Aug-21 01:24:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:24:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 01:24:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 01:24:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:24:47 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 01:24:47 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 01:24:47 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2010-Aug-21 01:24:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 01:24:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 01:24:48 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 01:24:48 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 01:24:48 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2010-Aug-21 01:24:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:24:48 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 01:24:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 01:24:48 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2010-Aug-21 01:24:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 01:24:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 01:24:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 01:24:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 01:24:48 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 01:24:48 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2010-Aug-21 01:24:48 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 01:24:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 01:24:48 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2010-Aug-21 01:24:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 01:24:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 01:24:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 01:24:48 LOG5 end_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2010-Aug-21 01:24:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 01:24:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 01:24:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 01:24:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 01:24:48 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2010-Aug-21 01:24:48 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 01:24:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 01:24:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 01:24:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 01:24:48 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2010-Aug-21 01:24:48 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 01:24:48 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 01:24:48 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Aug-21 01:24:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 01:24:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 01:24:48 INFO2 take_data: Starting WAPP 1-second scan: 23300017 2010-Aug-21 01:24:48 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 01:24:48 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2010-Aug-21 01:24:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 01:24:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 01:24:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19489.00 2010-Aug-21 01:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 01:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:24:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:24:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 01:24:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 01:24:50 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2010-Aug-21 01:24:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 01:24:50 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Aug-21 01:24:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 01:24:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 01:24:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 01:24:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 01:24:50 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2010-Aug-21 01:24:50 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 01:24:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 01:24:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 01:24:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 01:24:50 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2010-Aug-21 01:24:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 01:24:50 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 01:24:50 LOG5 finish_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2010-Aug-21 01:24:50 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 01:24:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 01:24:50 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 01:24:50 LOG5 end_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2010-Aug-21 01:24:50 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2010-Aug-21 01:24:50 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2010-Aug-21 01:24:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 01:24:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 01:24:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 01:24:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 01:24:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 01:24:51 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 01:24:51 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 01:24:51 LOG5 begin_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2010-Aug-21 01:24:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 01:24:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 01:24:51 INFO2 take_data: Starting WAPP 600-second scan: 23300018 2010-Aug-21 01:24:51 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 01:24:51 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Aug-21 01:24:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 01:24:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 01:24:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 01:24:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19492.00 2010-Aug-21 01:24:51 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0008.fits 2010-Aug-21 01:24:51 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0008.fits} 2010-Aug-21 01:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 01:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:24:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:34:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 01:34:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 01:34:52 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Aug-21 01:34:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 01:34:52 LOG5 end_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2010-Aug-21 01:34:52 LOG1 fixed_driftmap: New position: year = 2010.6380996019977 RA = 23:05:03.6 RA/Dec = 23:05:37.2 +22:48:43.8 2010-Aug-21 01:34:52 NOTE fixed_driftmap: Correcting ZA to 4:27:30.1 ... 2010-Aug-21 01:34:52 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4583584491 -CF 2010-Aug-21 01:34:52 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 01:34:52 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 01:34:52 LOG5 begin_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2010-Aug-21 01:34:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 01:34:52 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 01:34:52 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2010-Aug-21 01:34:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 01:34:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 01:34:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 01:34:52 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 01:34:52 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2010-Aug-21 01:34:52 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4583584491 -CF 2010-Aug-21 01:34:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:34:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 01:34:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 01:34:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:34:52 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 01:34:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 01:34:52 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2010-Aug-21 01:34:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 01:34:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 01:34:52 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 01:34:52 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 01:34:52 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2010-Aug-21 01:34:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:34:53 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 01:34:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 01:34:53 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2010-Aug-21 01:34:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 01:34:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 01:34:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 01:34:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 01:34:53 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 01:34:53 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2010-Aug-21 01:34:53 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 01:34:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 01:34:53 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2010-Aug-21 01:34:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 01:34:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 01:34:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 01:34:53 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2010-Aug-21 01:34:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 01:34:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 01:34:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 01:34:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 01:34:53 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2010-Aug-21 01:34:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 01:34:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 01:34:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 01:34:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 01:34:53 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2010-Aug-21 01:34:53 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 01:34:53 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 01:34:53 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Aug-21 01:34:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 01:34:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 01:34:53 INFO2 take_data: Starting WAPP 1-second scan: 23300019 2010-Aug-21 01:34:53 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 01:34:53 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2010-Aug-21 01:34:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 01:34:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 01:34:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20094.00 2010-Aug-21 01:34:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 01:34:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:34:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:34:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:34:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:34:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:34:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:34:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:34:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:34:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 01:34:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 01:34:55 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2010-Aug-21 01:34:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 01:34:55 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Aug-21 01:34:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 01:34:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 01:34:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 01:34:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 01:34:55 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2010-Aug-21 01:34:56 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 01:34:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 01:34:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 01:34:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 01:34:56 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2010-Aug-21 01:34:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 01:34:56 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 01:34:56 LOG5 finish_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2010-Aug-21 01:34:56 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 01:34:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 01:34:56 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 01:34:56 LOG5 end_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2010-Aug-21 01:34:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2010-Aug-21 01:34:56 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2010-Aug-21 01:34:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 01:34:56 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 01:34:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 01:34:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 01:34:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 01:34:56 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 01:34:56 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 01:34:56 LOG5 begin_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2010-Aug-21 01:34:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 01:34:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 01:34:56 INFO2 take_data: Starting WAPP 600-second scan: 23300020 2010-Aug-21 01:34:56 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 01:34:56 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2010-Aug-21 01:34:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 01:34:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 01:34:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 01:34:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20097.00 2010-Aug-21 01:34:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0009.fits 2010-Aug-21 01:34:56 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0009.fits} 2010-Aug-21 01:34:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 01:34:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:34:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:34:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:34:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:34:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:34:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:34:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:34:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:44:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 01:44:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 01:44:57 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2010-Aug-21 01:44:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 01:44:57 LOG5 end_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2010-Aug-21 01:44:57 LOG1 fixed_driftmap: New position: year = 2010.6381187732907 RA = 23:15:10.0 RA/Dec = 23:15:43.9 +22:48:45.7 2010-Aug-21 01:44:57 NOTE fixed_driftmap: Correcting ZA to 4:27:32.0 ... 2010-Aug-21 01:44:57 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4588757192 -CF 2010-Aug-21 01:44:57 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 01:44:57 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 01:44:57 LOG5 begin_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2010-Aug-21 01:44:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 01:44:57 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 01:44:57 LOG5 begin_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2010-Aug-21 01:44:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 01:44:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 01:44:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 01:44:57 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 01:44:57 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2010-Aug-21 01:44:57 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4588757192 -CF 2010-Aug-21 01:44:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:44:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 01:44:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 01:44:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:44:58 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 01:44:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 01:44:58 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2010-Aug-21 01:44:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 01:44:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 01:44:58 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 01:44:58 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 01:44:58 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2010-Aug-21 01:44:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:44:58 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 01:44:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 01:44:58 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2010-Aug-21 01:44:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 01:44:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 01:44:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 01:44:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 01:44:58 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 01:44:58 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2010-Aug-21 01:44:58 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 01:44:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 01:44:58 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2010-Aug-21 01:44:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 01:44:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 01:44:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 01:44:58 LOG5 end_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2010-Aug-21 01:44:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 01:44:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 01:44:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 01:44:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 01:44:58 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2010-Aug-21 01:44:58 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 01:44:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 01:44:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 01:44:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 01:44:58 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2010-Aug-21 01:44:58 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 01:44:58 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 01:44:58 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2010-Aug-21 01:44:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 01:44:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 01:44:58 INFO2 take_data: Starting WAPP 1-second scan: 23300021 2010-Aug-21 01:44:58 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 01:44:58 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2010-Aug-21 01:44:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 01:44:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 01:44:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20699.00 2010-Aug-21 01:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 01:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:45:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:45:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 01:45:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 01:45:00 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2010-Aug-21 01:45:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 01:45:00 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2010-Aug-21 01:45:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 01:45:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 01:45:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 01:45:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 01:45:00 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2010-Aug-21 01:45:00 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 01:45:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 01:45:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 01:45:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 01:45:00 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2010-Aug-21 01:45:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 01:45:00 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 01:45:00 LOG5 finish_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2010-Aug-21 01:45:00 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 01:45:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 01:45:00 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 01:45:00 LOG5 end_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2010-Aug-21 01:45:00 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2010-Aug-21 01:45:01 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2010-Aug-21 01:45:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 01:45:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 01:45:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 01:45:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 01:45:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 01:45:01 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 01:45:01 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 01:45:01 LOG5 begin_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2010-Aug-21 01:45:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 01:45:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 01:45:01 INFO2 take_data: Starting WAPP 600-second scan: 23300022 2010-Aug-21 01:45:01 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 01:45:01 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2010-Aug-21 01:45:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 01:45:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 01:45:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 01:45:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20702.00 2010-Aug-21 01:45:01 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0010.fits 2010-Aug-21 01:45:01 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0010.fits} 2010-Aug-21 01:45:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 01:45:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:45:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:45:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:45:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:45:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:45:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:45:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:45:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:55:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 01:55:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 01:55:02 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2010-Aug-21 01:55:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 01:55:02 LOG5 end_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2010-Aug-21 01:55:02 LOG1 fixed_driftmap: New position: year = 2010.6381379445838 RA = 23:25:16.4 RA/Dec = 23:25:50.5 +22:48:47.1 2010-Aug-21 01:55:02 NOTE fixed_driftmap: Correcting ZA to 4:27:33.4 ... 2010-Aug-21 01:55:02 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4592777624 -CF 2010-Aug-21 01:55:02 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 01:55:02 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 01:55:02 LOG5 begin_task: Level: (2) ID = <10255> Status = 0 0 0 0 ok 2010-Aug-21 01:55:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 01:55:02 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 01:55:02 LOG5 begin_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2010-Aug-21 01:55:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 01:55:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 01:55:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 01:55:02 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 01:55:02 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2010-Aug-21 01:55:02 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4592777624 -CF 2010-Aug-21 01:55:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:55:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 01:55:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 01:55:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:55:02 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 01:55:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 01:55:02 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2010-Aug-21 01:55:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 01:55:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 01:55:03 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 01:55:03 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 01:55:03 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2010-Aug-21 01:55:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 01:55:03 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 01:55:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 01:55:03 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2010-Aug-21 01:55:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 01:55:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 01:55:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 01:55:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 01:55:03 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 01:55:03 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2010-Aug-21 01:55:03 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 01:55:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 01:55:03 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2010-Aug-21 01:55:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 01:55:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 01:55:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 01:55:03 LOG5 end_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2010-Aug-21 01:55:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 01:55:03 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 01:55:03 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 01:55:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 01:55:03 LOG5 begin_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2010-Aug-21 01:55:03 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 01:55:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 01:55:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 01:55:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 01:55:03 LOG5 end_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2010-Aug-21 01:55:03 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 01:55:03 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 01:55:03 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2010-Aug-21 01:55:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 01:55:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 01:55:03 INFO2 take_data: Starting WAPP 1-second scan: 23300023 2010-Aug-21 01:55:03 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 01:55:03 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2010-Aug-21 01:55:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 01:55:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 01:55:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21304.00 2010-Aug-21 01:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 01:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:55:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:55:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 01:55:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 01:55:05 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2010-Aug-21 01:55:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 01:55:05 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2010-Aug-21 01:55:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 01:55:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 01:55:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 01:55:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 01:55:05 LOG5 begin_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2010-Aug-21 01:55:05 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 01:55:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 01:55:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 01:55:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 01:55:05 LOG5 end_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2010-Aug-21 01:55:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 01:55:05 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 01:55:05 LOG5 finish_task: Level: (2) ID = <10255> Status = 0 0 0 0 ok 2010-Aug-21 01:55:05 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 01:55:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 01:55:05 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 01:55:05 LOG5 end_task: Level: (2) ID = <10255> Status = 0 0 0 0 ok 2010-Aug-21 01:55:05 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2010-Aug-21 01:55:05 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2010-Aug-21 01:55:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 01:55:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 01:55:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 01:55:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 01:55:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 01:55:06 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 01:55:06 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 01:55:06 LOG5 begin_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2010-Aug-21 01:55:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 01:55:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 01:55:06 INFO2 take_data: Starting WAPP 600-second scan: 23300024 2010-Aug-21 01:55:06 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 01:55:06 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2010-Aug-21 01:55:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 01:55:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 01:55:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 01:55:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21307.00 2010-Aug-21 01:55:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0011.fits 2010-Aug-21 01:55:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0011.fits} 2010-Aug-21 01:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 01:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 01:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 01:55:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:05:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 02:05:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 02:05:07 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2010-Aug-21 02:05:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 02:05:07 LOG5 end_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2010-Aug-21 02:05:07 LOG1 fixed_driftmap: New position: year = 2010.638157115877 RA = 23:35:22.8 RA/Dec = 23:35:57.2 +22:48:48.1 2010-Aug-21 02:05:07 NOTE fixed_driftmap: Correcting ZA to 4:27:34.4 ... 2010-Aug-21 02:05:07 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4595637913 -CF 2010-Aug-21 02:05:07 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 02:05:07 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 02:05:07 LOG5 begin_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2010-Aug-21 02:05:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 02:05:07 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 02:05:07 LOG5 begin_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2010-Aug-21 02:05:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 02:05:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 02:05:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 02:05:07 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 02:05:07 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2010-Aug-21 02:05:07 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4595637913 -CF 2010-Aug-21 02:05:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:05:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 02:05:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 02:05:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:05:07 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 02:05:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 02:05:07 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2010-Aug-21 02:05:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 02:05:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 02:05:07 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 02:05:07 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 02:05:07 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2010-Aug-21 02:05:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:05:07 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 02:05:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 02:05:07 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2010-Aug-21 02:05:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 02:05:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 02:05:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 02:05:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 02:05:08 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 02:05:08 LOG5 begin_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2010-Aug-21 02:05:08 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 02:05:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 02:05:08 LOG5 end_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2010-Aug-21 02:05:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 02:05:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 02:05:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 02:05:08 LOG5 end_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2010-Aug-21 02:05:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 02:05:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 02:05:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 02:05:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 02:05:08 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2010-Aug-21 02:05:08 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 02:05:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 02:05:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 02:05:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 02:05:08 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2010-Aug-21 02:05:08 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 02:05:08 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 02:05:08 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2010-Aug-21 02:05:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 02:05:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 02:05:08 INFO2 take_data: Starting WAPP 1-second scan: 23300025 2010-Aug-21 02:05:08 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 02:05:08 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2010-Aug-21 02:05:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 02:05:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 02:05:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21909.00 2010-Aug-21 02:05:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 02:05:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:05:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:05:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:05:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:05:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:05:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:05:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:05:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:05:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 02:05:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 02:05:10 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2010-Aug-21 02:05:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 02:05:10 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2010-Aug-21 02:05:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 02:05:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 02:05:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 02:05:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 02:05:10 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2010-Aug-21 02:05:11 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 02:05:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 02:05:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 02:05:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 02:05:11 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2010-Aug-21 02:05:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 02:05:11 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 02:05:11 LOG5 finish_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2010-Aug-21 02:05:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 02:05:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 02:05:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 02:05:11 LOG5 end_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2010-Aug-21 02:05:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2010-Aug-21 02:05:11 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2010-Aug-21 02:05:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 02:05:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 02:05:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 02:05:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 02:05:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 02:05:11 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 02:05:11 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 02:05:11 LOG5 begin_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2010-Aug-21 02:05:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 02:05:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 02:05:11 INFO2 take_data: Starting WAPP 600-second scan: 23300026 2010-Aug-21 02:05:11 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 02:05:11 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2010-Aug-21 02:05:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 02:05:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 02:05:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 02:05:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21912.00 2010-Aug-21 02:05:11 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0012.fits 2010-Aug-21 02:05:11 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0012.fits} 2010-Aug-21 02:05:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 02:05:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:05:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:05:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:05:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:05:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:05:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:05:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:05:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:15:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 02:15:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 02:15:12 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2010-Aug-21 02:15:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 02:15:12 LOG5 end_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2010-Aug-21 02:15:12 LOG1 fixed_driftmap: New position: year = 2010.6381762871702 RA = 23:45:29.3 RA/Dec = 23:46:03.8 +22:48:48.7 2010-Aug-21 02:15:12 NOTE fixed_driftmap: Correcting ZA to 4:27:35.0 ... 2010-Aug-21 02:15:12 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4597332527 -CF 2010-Aug-21 02:15:12 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 02:15:12 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 02:15:12 LOG5 begin_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2010-Aug-21 02:15:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 02:15:12 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 02:15:12 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2010-Aug-21 02:15:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 02:15:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 02:15:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 02:15:12 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 02:15:12 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2010-Aug-21 02:15:12 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4597332527 -CF 2010-Aug-21 02:15:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:15:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 02:15:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 02:15:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:15:13 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 02:15:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 02:15:13 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2010-Aug-21 02:15:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 02:15:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 02:15:13 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 02:15:13 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 02:15:13 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2010-Aug-21 02:15:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:15:13 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 02:15:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 02:15:13 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2010-Aug-21 02:15:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 02:15:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 02:15:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 02:15:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 02:15:13 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 02:15:13 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2010-Aug-21 02:15:13 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 02:15:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 02:15:13 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2010-Aug-21 02:15:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 02:15:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 02:15:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 02:15:13 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2010-Aug-21 02:15:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 02:15:13 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 02:15:13 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 02:15:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 02:15:13 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2010-Aug-21 02:15:13 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 02:15:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 02:15:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 02:15:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 02:15:13 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2010-Aug-21 02:15:13 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 02:15:13 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 02:15:13 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Aug-21 02:15:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 02:15:13 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 02:15:13 INFO2 take_data: Starting WAPP 1-second scan: 23300027 2010-Aug-21 02:15:14 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 02:15:14 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2010-Aug-21 02:15:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 02:15:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 02:15:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22515.00 2010-Aug-21 02:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 02:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:15:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 02:15:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 02:15:16 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2010-Aug-21 02:15:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 02:15:16 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Aug-21 02:15:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 02:15:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 02:15:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 02:15:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 02:15:16 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2010-Aug-21 02:15:16 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 02:15:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 02:15:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 02:15:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 02:15:16 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2010-Aug-21 02:15:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 02:15:16 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 02:15:16 LOG5 finish_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2010-Aug-21 02:15:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 02:15:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 02:15:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 02:15:16 LOG5 end_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2010-Aug-21 02:15:16 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2010-Aug-21 02:15:16 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2010-Aug-21 02:15:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 02:15:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 02:15:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 02:15:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 02:15:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 02:15:17 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 02:15:17 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 02:15:17 LOG5 begin_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2010-Aug-21 02:15:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 02:15:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 02:15:17 INFO2 take_data: Starting WAPP 600-second scan: 23300028 2010-Aug-21 02:15:17 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 02:15:17 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2010-Aug-21 02:15:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 02:15:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 02:15:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 02:15:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22518.00 2010-Aug-21 02:15:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0013.fits 2010-Aug-21 02:15:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0013.fits} 2010-Aug-21 02:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 02:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:25:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 02:25:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 02:25:18 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2010-Aug-21 02:25:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 02:25:18 LOG5 end_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2010-Aug-21 02:25:18 LOG1 fixed_driftmap: New position: year = 2010.6381954901515 RA = 23:55:36.7 RA/Dec = 23:56:11.5 +22:48:48.9 2010-Aug-21 02:25:18 NOTE fixed_driftmap: Correcting ZA to 4:27:35.2 ... 2010-Aug-21 02:25:18 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4597858047 -CF 2010-Aug-21 02:25:18 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 02:25:18 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 02:25:18 LOG5 begin_task: Level: (2) ID = <10288> Status = 0 0 0 0 ok 2010-Aug-21 02:25:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 02:25:18 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 02:25:18 LOG5 begin_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2010-Aug-21 02:25:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 02:25:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 02:25:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 02:25:18 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 02:25:18 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2010-Aug-21 02:25:18 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4597858047 -CF 2010-Aug-21 02:25:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:25:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 02:25:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 02:25:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:25:18 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 02:25:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 02:25:18 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2010-Aug-21 02:25:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 02:25:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 02:25:18 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 02:25:18 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 02:25:18 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2010-Aug-21 02:25:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:25:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 02:25:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 02:25:19 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2010-Aug-21 02:25:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 02:25:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 02:25:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 02:25:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 02:25:19 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 02:25:19 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2010-Aug-21 02:25:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 02:25:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 02:25:19 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2010-Aug-21 02:25:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 02:25:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 02:25:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 02:25:19 LOG5 end_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2010-Aug-21 02:25:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 02:25:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 02:25:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 02:25:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 02:25:19 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2010-Aug-21 02:25:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 02:25:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 02:25:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 02:25:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 02:25:19 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2010-Aug-21 02:25:19 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 02:25:19 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 02:25:19 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Aug-21 02:25:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 02:25:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 02:25:19 INFO2 take_data: Starting WAPP 1-second scan: 23300029 2010-Aug-21 02:25:19 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 02:25:19 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2010-Aug-21 02:25:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 02:25:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 02:25:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23120.00 2010-Aug-21 02:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 02:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:25:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 02:25:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 02:25:21 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2010-Aug-21 02:25:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 02:25:21 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Aug-21 02:25:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 02:25:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 02:25:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 02:25:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 02:25:21 LOG5 begin_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2010-Aug-21 02:25:21 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 02:25:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 02:25:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 02:25:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 02:25:21 LOG5 end_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2010-Aug-21 02:25:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 02:25:21 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 02:25:21 LOG5 finish_task: Level: (2) ID = <10288> Status = 0 0 0 0 ok 2010-Aug-21 02:25:21 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 02:25:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 02:25:21 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 02:25:21 LOG5 end_task: Level: (2) ID = <10288> Status = 0 0 0 0 ok 2010-Aug-21 02:25:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2010-Aug-21 02:25:21 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2010-Aug-21 02:25:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 02:25:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 02:25:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 02:25:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 02:25:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 02:25:22 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 02:25:22 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 02:25:22 LOG5 begin_task: Level: (2) ID = <10297> Status = 0 0 0 0 ok 2010-Aug-21 02:25:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 02:25:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 02:25:22 INFO2 take_data: Starting WAPP 600-second scan: 23300030 2010-Aug-21 02:25:22 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 02:25:22 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2010-Aug-21 02:25:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 02:25:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 02:25:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 02:25:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23123.00 2010-Aug-21 02:25:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0014.fits 2010-Aug-21 02:25:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0014.fits} 2010-Aug-21 02:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 02:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:35:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 02:35:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 02:35:23 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2010-Aug-21 02:35:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 02:35:23 LOG5 end_task: Level: (2) ID = <10297> Status = 0 0 0 0 ok 2010-Aug-21 02:35:23 LOG1 fixed_driftmap: New position: year = 2010.6382146614444 RA = 00:05:43.1 RA/Dec = 00:06:18.2 +22:48:48.7 2010-Aug-21 02:35:23 NOTE fixed_driftmap: Correcting ZA to 4:27:35.0 ... 2010-Aug-21 02:35:23 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4597211715 -CF 2010-Aug-21 02:35:23 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 02:35:23 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 02:35:23 LOG5 begin_task: Level: (2) ID = <10299> Status = 0 0 0 0 ok 2010-Aug-21 02:35:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 02:35:23 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 02:35:23 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2010-Aug-21 02:35:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 02:35:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 02:35:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 02:35:23 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 02:35:23 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2010-Aug-21 02:35:23 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4597211715 -CF 2010-Aug-21 02:35:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:35:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 02:35:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 02:35:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:35:23 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 02:35:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 02:35:23 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2010-Aug-21 02:35:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 02:35:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 02:35:23 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 02:35:23 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 02:35:23 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2010-Aug-21 02:35:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:35:24 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 02:35:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 02:35:24 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2010-Aug-21 02:35:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 02:35:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 02:35:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 02:35:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 02:35:24 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 02:35:24 LOG5 begin_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2010-Aug-21 02:35:24 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 02:35:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 02:35:24 LOG5 end_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2010-Aug-21 02:35:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 02:35:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 02:35:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 02:35:24 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2010-Aug-21 02:35:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 02:35:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 02:35:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 02:35:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 02:35:24 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2010-Aug-21 02:35:24 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 02:35:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 02:35:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 02:35:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 02:35:24 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2010-Aug-21 02:35:24 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 02:35:24 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 02:35:24 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2010-Aug-21 02:35:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 02:35:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 02:35:24 INFO2 take_data: Starting WAPP 1-second scan: 23300031 2010-Aug-21 02:35:24 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 02:35:24 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2010-Aug-21 02:35:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 02:35:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 02:35:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23725.00 2010-Aug-21 02:35:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 02:35:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:35:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:35:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:35:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:35:26 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:35:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:35:26 LOG3 WAPP=2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:35:26 LOG3 WAPP=2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:35:26 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:35:26 LOG3 WAPP=1-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:35:26 LOG3 WAPP=1-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:35:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 02:35:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 02:35:26 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2010-Aug-21 02:35:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 02:35:26 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2010-Aug-21 02:35:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 02:35:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 02:35:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 02:35:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 02:35:26 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2010-Aug-21 02:35:27 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 02:35:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 02:35:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 02:35:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 02:35:27 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2010-Aug-21 02:35:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 02:35:27 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 02:35:27 LOG5 finish_task: Level: (2) ID = <10299> Status = 0 0 0 0 ok 2010-Aug-21 02:35:27 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 02:35:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 02:35:27 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 02:35:27 LOG5 end_task: Level: (2) ID = <10299> Status = 0 0 0 0 ok 2010-Aug-21 02:35:27 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2010-Aug-21 02:35:27 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2010-Aug-21 02:35:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 02:35:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 02:35:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 02:35:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 02:35:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 02:35:27 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 02:35:27 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 02:35:27 LOG5 begin_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2010-Aug-21 02:35:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 02:35:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 02:35:27 INFO2 take_data: Starting WAPP 600-second scan: 23300032 2010-Aug-21 02:35:27 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 02:35:27 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2010-Aug-21 02:35:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 02:35:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 02:35:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 02:35:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23728.00 2010-Aug-21 02:35:27 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0015.fits 2010-Aug-21 02:35:27 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0015.fits} 2010-Aug-21 02:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 02:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:35:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:45:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 02:45:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 02:45:28 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2010-Aug-21 02:45:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 02:45:28 LOG5 end_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2010-Aug-21 02:45:28 LOG1 fixed_driftmap: New position: year = 2010.6382338327376 RA = 00:15:49.5 RA/Dec = 00:16:24.8 +22:48:48.0 2010-Aug-21 02:45:28 NOTE fixed_driftmap: Correcting ZA to 4:27:34.3 ... 2010-Aug-21 02:45:28 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4595396597 -CF 2010-Aug-21 02:45:28 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 02:45:28 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 02:45:28 LOG5 begin_task: Level: (2) ID = <10310> Status = 0 0 0 0 ok 2010-Aug-21 02:45:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 02:45:28 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 02:45:28 LOG5 begin_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2010-Aug-21 02:45:28 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 02:45:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 02:45:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 02:45:28 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 02:45:28 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2010-Aug-21 02:45:28 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4595396597 -CF 2010-Aug-21 02:45:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:45:28 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 02:45:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 02:45:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:45:29 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 02:45:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 02:45:29 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2010-Aug-21 02:45:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 02:45:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 02:45:29 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 02:45:29 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 02:45:29 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2010-Aug-21 02:45:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:45:29 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 02:45:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 02:45:29 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2010-Aug-21 02:45:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 02:45:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 02:45:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 02:45:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 02:45:29 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 02:45:29 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2010-Aug-21 02:45:29 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 02:45:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 02:45:29 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2010-Aug-21 02:45:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 02:45:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 02:45:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 02:45:29 LOG5 end_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2010-Aug-21 02:45:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 02:45:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 02:45:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 02:45:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 02:45:29 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2010-Aug-21 02:45:29 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 02:45:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 02:45:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 02:45:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 02:45:29 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2010-Aug-21 02:45:29 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 02:45:29 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 02:45:29 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2010-Aug-21 02:45:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 02:45:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 02:45:29 INFO2 take_data: Starting WAPP 1-second scan: 23300033 2010-Aug-21 02:45:29 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 02:45:29 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2010-Aug-21 02:45:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 02:45:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 02:45:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24330.00 2010-Aug-21 02:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 02:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:45:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 02:45:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 02:45:31 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2010-Aug-21 02:45:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 02:45:31 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2010-Aug-21 02:45:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 02:45:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 02:45:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 02:45:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 02:45:31 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2010-Aug-21 02:45:31 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 02:45:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 02:45:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 02:45:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 02:45:31 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2010-Aug-21 02:45:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 02:45:31 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 02:45:31 LOG5 finish_task: Level: (2) ID = <10310> Status = 0 0 0 0 ok 2010-Aug-21 02:45:31 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 02:45:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 02:45:31 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 02:45:31 LOG5 end_task: Level: (2) ID = <10310> Status = 0 0 0 0 ok 2010-Aug-21 02:45:31 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2010-Aug-21 02:45:31 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2010-Aug-21 02:45:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 02:45:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 02:45:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 02:45:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 02:45:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 02:45:32 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 02:45:32 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 02:45:32 LOG5 begin_task: Level: (2) ID = <10319> Status = 0 0 0 0 ok 2010-Aug-21 02:45:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 02:45:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 02:45:32 INFO2 take_data: Starting WAPP 600-second scan: 23300034 2010-Aug-21 02:45:32 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 02:45:32 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2010-Aug-21 02:45:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 02:45:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 02:45:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 02:45:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24333.00 2010-Aug-21 02:45:32 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0016.fits 2010-Aug-21 02:45:32 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0016.fits} 2010-Aug-21 02:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 02:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:45:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:55:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 02:55:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 02:55:33 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2010-Aug-21 02:55:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 02:55:33 LOG5 end_task: Level: (2) ID = <10319> Status = 0 0 0 0 ok 2010-Aug-21 02:55:33 LOG1 fixed_driftmap: New position: year = 2010.6382530040307 RA = 00:25:55.9 RA/Dec = 00:26:31.5 +22:48:47.0 2010-Aug-21 02:55:33 NOTE fixed_driftmap: Correcting ZA to 4:27:33.3 ... 2010-Aug-21 02:55:33 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4592416229 -CF 2010-Aug-21 02:55:33 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 02:55:33 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 02:55:33 LOG5 begin_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2010-Aug-21 02:55:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 02:55:33 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 02:55:33 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2010-Aug-21 02:55:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 02:55:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 02:55:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 02:55:33 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 02:55:33 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2010-Aug-21 02:55:33 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4592416229 -CF 2010-Aug-21 02:55:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:55:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 02:55:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 02:55:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:55:33 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 02:55:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 02:55:33 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2010-Aug-21 02:55:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 02:55:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 02:55:33 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 02:55:33 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 02:55:33 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2010-Aug-21 02:55:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 02:55:34 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 02:55:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 02:55:34 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2010-Aug-21 02:55:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 02:55:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 02:55:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 02:55:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 02:55:34 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 02:55:34 LOG5 begin_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2010-Aug-21 02:55:34 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 02:55:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 02:55:34 LOG5 end_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2010-Aug-21 02:55:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 02:55:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 02:55:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 02:55:34 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2010-Aug-21 02:55:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 02:55:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 02:55:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 02:55:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 02:55:34 LOG5 begin_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2010-Aug-21 02:55:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 02:55:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 02:55:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 02:55:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 02:55:34 LOG5 end_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2010-Aug-21 02:55:34 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 02:55:34 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 02:55:34 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2010-Aug-21 02:55:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 02:55:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 02:55:34 INFO2 take_data: Starting WAPP 1-second scan: 23300035 2010-Aug-21 02:55:34 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 02:55:34 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2010-Aug-21 02:55:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 02:55:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 02:55:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24935.00 2010-Aug-21 02:55:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 02:55:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:55:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:55:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:55:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:55:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:55:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:55:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:55:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:55:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 02:55:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 02:55:36 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2010-Aug-21 02:55:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 02:55:36 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2010-Aug-21 02:55:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 02:55:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 02:55:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 02:55:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 02:55:36 LOG5 begin_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2010-Aug-21 02:55:36 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 02:55:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 02:55:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 02:55:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 02:55:36 LOG5 end_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2010-Aug-21 02:55:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 02:55:36 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 02:55:36 LOG5 finish_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2010-Aug-21 02:55:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 02:55:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 02:55:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 02:55:36 LOG5 end_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2010-Aug-21 02:55:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2010-Aug-21 02:55:36 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2010-Aug-21 02:55:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 02:55:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 02:55:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 02:55:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 02:55:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 02:55:37 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 02:55:37 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 02:55:37 LOG5 begin_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2010-Aug-21 02:55:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 02:55:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 02:55:37 INFO2 take_data: Starting WAPP 600-second scan: 23300036 2010-Aug-21 02:55:37 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 02:55:37 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2010-Aug-21 02:55:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 02:55:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 02:55:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 02:55:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24938.00 2010-Aug-21 02:55:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0017.fits 2010-Aug-21 02:55:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0017.fits} 2010-Aug-21 02:55:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 02:55:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:55:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:55:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:55:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 02:55:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:55:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:55:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 02:55:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 03:05:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 03:05:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 03:05:38 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2010-Aug-21 03:05:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 03:05:38 LOG5 end_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2010-Aug-21 03:05:38 LOG1 fixed_driftmap: New position: year = 2010.6382721753239 RA = 00:36:02.4 RA/Dec = 00:36:38.1 +22:48:45.5 2010-Aug-21 03:05:38 NOTE fixed_driftmap: Correcting ZA to 4:27:31.8 ... 2010-Aug-21 03:05:38 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4588276387 -CF 2010-Aug-21 03:05:38 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 03:05:38 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 03:05:38 LOG5 begin_task: Level: (2) ID = <10332> Status = 0 0 0 0 ok 2010-Aug-21 03:05:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 03:05:38 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 03:05:38 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2010-Aug-21 03:05:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 03:05:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 03:05:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 03:05:38 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 03:05:38 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2010-Aug-21 03:05:38 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4588276387 -CF 2010-Aug-21 03:05:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 03:05:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 03:05:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 03:05:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 03:05:38 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 03:05:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 03:05:38 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2010-Aug-21 03:05:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 03:05:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 03:05:38 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 03:05:38 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 03:05:38 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2010-Aug-21 03:05:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 03:05:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 03:05:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 03:05:39 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2010-Aug-21 03:05:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 03:05:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 03:05:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 03:05:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 03:05:39 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 03:05:39 LOG5 begin_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2010-Aug-21 03:05:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 03:05:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 03:05:39 LOG5 end_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2010-Aug-21 03:05:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 03:05:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 03:05:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 03:05:39 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2010-Aug-21 03:05:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 03:05:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 03:05:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 03:05:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 03:05:39 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2010-Aug-21 03:05:39 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 03:05:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 03:05:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 03:05:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 03:05:39 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2010-Aug-21 03:05:39 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 03:05:39 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 03:05:39 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Aug-21 03:05:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 03:05:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 03:05:39 INFO2 take_data: Starting WAPP 1-second scan: 23300037 2010-Aug-21 03:05:39 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 03:05:39 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2010-Aug-21 03:05:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 03:05:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 03:05:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25540.00 2010-Aug-21 03:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 03:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 03:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 03:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 03:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 03:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 03:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 03:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 03:05:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 03:05:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 03:05:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 03:05:41 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2010-Aug-21 03:05:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 03:05:41 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Aug-21 03:05:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-21 03:05:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-21 03:05:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-21 03:05:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 03:05:41 LOG5 begin_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2010-Aug-21 03:05:42 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 03:05:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-21 03:05:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 03:05:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 03:05:42 LOG5 end_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2010-Aug-21 03:05:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-21 03:05:42 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-21 03:05:42 LOG5 finish_task: Level: (2) ID = <10332> Status = 0 0 0 0 ok 2010-Aug-21 03:05:42 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-21 03:05:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-21 03:05:42 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-21 03:05:42 LOG5 end_task: Level: (2) ID = <10332> Status = 0 0 0 0 ok 2010-Aug-21 03:05:42 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 20 of 99 2010-Aug-21 03:05:42 LOG4 send_obs_status: To obs_status: <1> LOOP 20 2010-Aug-21 03:05:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ron Olowin 2010-Aug-21 03:05:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ron Olowin 2010-Aug-21 03:05:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ron Olowin 2010-Aug-21 03:05:42 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ron Olowin 2010-Aug-21 03:05:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-21 03:05:42 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-21 03:05:42 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 03:05:42 LOG5 begin_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2010-Aug-21 03:05:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-21 03:05:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 03:05:42 INFO2 take_data: Starting WAPP 600-second scan: 23300038 2010-Aug-21 03:05:42 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 03:05:42 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2010-Aug-21 03:05:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ron Olowin' 2010-Aug-21 03:05:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 03:05:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-21 03:05:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25543.00 2010-Aug-21 03:05:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20100821.a2010.0018.fits 2010-Aug-21 03:05:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100821.a2010.0018.fits} 2010-Aug-21 03:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 03:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 03:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 03:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 03:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 03:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 03:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 03:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 03:05:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 03:15:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-21 03:15:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-21 03:15:43 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2010-Aug-21 03:15:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-21 03:15:43 LOG5 end_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2010-Aug-21 03:15:43 LOG1 fixed_driftmap: New position: year = 2010.6382913466171 RA = 00:46:08.8 RA/Dec = 00:46:44.8 +22:48:43.6 2010-Aug-21 03:15:43 NOTE fixed_driftmap: Correcting ZA to 4:27:29.9 ... 2010-Aug-21 03:15:43 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.4582985107 -CF 2010-Aug-21 03:15:43 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-21 03:15:43 START begin_task: Starting task 'WAPP calibration' 2010-Aug-21 03:15:43 LOG5 begin_task: Level: (2) ID = <10343> Status = 0 0 0 0 ok 2010-Aug-21 03:15:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-21 03:15:43 START begin_task: Starting task 'selecting calibration type' 2010-Aug-21 03:15:43 LOG5 begin_task: Level: (3) ID = <10344> Status = 0 0 0 0 ok 2010-Aug-21 03:15:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-21 03:15:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-21 03:15:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 03:15:43 START begin_task: Starting task 'waiting on setcal' 2010-Aug-21 03:15:43 LOG5 begin_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2010-Aug-21 03:15:43 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.4582985107 -CF 2010-Aug-21 03:15:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 03:15:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-21 03:15:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-21 03:15:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 03:15:44 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-21 03:15:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-21 03:15:44 LOG5 end_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2010-Aug-21 03:15:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-21 03:15:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 03:15:44 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-21 03:15:44 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 03:15:44 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2010-Aug-21 03:15:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-21 03:15:44 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 03:15:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 03:15:44 LOG5 end_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2010-Aug-21 03:15:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 03:15:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-21 03:15:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-21 03:15:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-21 03:15:44 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-21 03:15:44 LOG5 begin_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2010-Aug-21 03:15:44 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-21 03:15:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-21 03:15:44 LOG5 end_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2010-Aug-21 03:15:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-21 03:15:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-21 03:15:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-21 03:15:44 LOG5 end_task: Level: (3) ID = <10344> Status = 0 0 0 0 ok 2010-Aug-21 03:15:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-21 03:15:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-21 03:15:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-21 03:15:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-21 03:15:44 LOG5 begin_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2010-Aug-21 03:15:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-21 03:15:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-21 03:15:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-21 03:15:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-21 03:15:44 LOG5 end_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2010-Aug-21 03:15:44 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-21 03:15:44 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-21 03:15:44 LOG5 begin_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2010-Aug-21 03:15:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-21 03:15:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-21 03:15:44 INFO2 take_data: Starting WAPP 1-second scan: 23300039 2010-Aug-21 03:15:44 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-21 03:15:44 LOG5 begin_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2010-Aug-21 03:15:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-21 03:15:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-21 03:15:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26145.00 2010-Aug-21 03:15:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-21 03:15:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 03:15:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 03:15:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 03:15:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-21 03:15:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Aug-21 03:15:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000