2010-Aug-19 23:35:35 BEGIN executive: CIMA executive starting ... 2010-Aug-19 23:35:36 NOTE executive: STARTING NEW CIMA SESSION 2010-Aug-19 23:35:36 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-Aug-19 23:35:36 INFO4 executive: This is an ON-LINE session 2010-Aug-19 23:35:36 INFO4 executive: This is a LOCAL session 2010-Aug-19 23:35:36 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-Aug-19 23:35:36 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Parker Troischt' 2010-Aug-19 23:35:36 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20100819' 2010-Aug-19 23:35:36 LOG2 log_preferences: Currently applied preferences: 2010-Aug-19 23:35:36 LOG2 log_preferences: prefs(dailylog) = daily 2010-Aug-19 23:35:36 LOG2 log_preferences: prefs(offlinelog) = skip 2010-Aug-19 23:35:36 LOG2 log_preferences: prefs(datawindow) = open 2010-Aug-19 23:35:36 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-Aug-19 23:35:36 LOG2 log_preferences: prefs(wappfailure) = abort 2010-Aug-19 23:35:36 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-Aug-19 23:35:36 LOG2 log_preferences: prefs(logcolours) = full 2010-Aug-19 23:35:36 LOG2 log_preferences: prefs(displaylevel) = INFO5 2010-Aug-19 23:35:36 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-Aug-19 23:35:36 LOG2 log_preferences: prefs(displayformat) = long 2010-Aug-19 23:35:36 LOG2 log_preferences: prefs(logformat) = new 2010-Aug-19 23:35:36 LOG2 log_preferences: prefs(fontsize) = 3 2010-Aug-19 23:35:36 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-Aug-19 23:35:36 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2010-Aug-19 23:35:36 ALERT executive: CIMA executive ready 2010-Aug-19 23:35:37 NOTE frontend: CIMA frontend ready 2010-Aug-19 23:35:38 LOG4 got_cormsg: From DATATAKING: vw% setup 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2010-Aug-19 23:35:43 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: vw% io 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-Aug-19 23:35:43 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:35:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:35:45 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-Aug-19 23:35:45 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-Aug-19 23:35:45 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-Aug-19 23:35:45 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-Aug-19 23:35:45 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-19 23:35:45 NOTE select_receiver: Starting to select receiver ALFA 2010-Aug-19 23:35:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Aug-19 23:35:45 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Aug-19 23:35:45 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Aug-19 23:35:45 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Aug-19 23:35:45 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Aug-19 23:35:45 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-19 23:35:45 DONE finish_task: DONE finished selecting: receiver ALFA 2010-Aug-19 23:35:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-19 23:35:45 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Aug-19 23:35:45 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-19 23:35:45 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Aug-19 23:35:45 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Aug-19 23:35:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:35:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:35:57 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Aug-19 23:35:57 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Aug-19 23:35:57 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Aug-19 23:35:57 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Aug-19 23:35:57 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Aug-19 23:35:57 NOTE restart_wapp: Restarting all WAPPs 2010-Aug-19 23:35:57 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Aug-19 23:35:57 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Aug-19 23:35:57 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Aug-19 23:35:57 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-19 23:36:00 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Aug-19 23:36:00 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Aug-19 23:36:00 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Aug-19 23:36:00 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Aug-19 23:36:20 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc_aug10.cmd' 2010-Aug-19 23:36:24 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc_aug10.cmd' to executive ... 2010-Aug-19 23:36:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_10.conf} 2010-Aug-19 23:36:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {CATALOG galfa_togs.cat} 2010-Aug-19 23:36:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {SEEK galfasrc} 2010-Aug-19 23:36:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 10 {TRACKCURPOS} 2010-Aug-19 23:36:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 11 {ALFAANGLE 19.} 2010-Aug-19 23:36:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {WAITTRACK} 2010-Aug-19 23:36:24 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2010-Aug-19 23:36:24 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Aug-19 23:36:24 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc_aug10.cmd 1 1 7 2010-Aug-19 23:36:24 LOG4 run_command_file: Calling 'run_command_file command_galfasrc_aug10.cmd 1 1 7' 2010-Aug-19 23:36:24 BEGIN begin_task: Starting task 'running command file 'command_galfasrc_aug10.cmd'' 2010-Aug-19 23:36:24 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-19 23:36:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc_aug10.cmd' ...} 2010-Aug-19 23:36:25 NOTE run_command_file: Starting execution of command file 'command_galfasrc_aug10.cmd' from line 1 2010-Aug-19 23:36:25 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_10.conf' 2010-Aug-19 23:36:25 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-19 23:36:25 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Aug-19 23:36:25 NOTE CIMA-load_config_file: Loading configuration file 'togs_10.conf' 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Aug-19 23:36:25 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Aug-19 23:36:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Aug-19 23:36:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Aug-19 23:36:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Aug-19 23:36:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Aug-19 23:36:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Aug-19 23:36:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-19 23:36:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-19 23:36:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-19 23:36:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-19 23:36:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Aug-19 23:36:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Aug-19 23:36:27 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Aug-19 23:36:27 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-19 23:36:27 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Aug-19 23:36:27 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-19 23:36:27 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Aug-19 23:36:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Aug-19 23:36:27 INFO1 config_iflo: Selecting receiver ALFA 2010-Aug-19 23:36:27 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-Aug-19 23:36:27 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2010-Aug-19 23:36:27 START begin_task: Starting task 'selecting receiver ALFA' 2010-Aug-19 23:36:27 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-19 23:36:27 NOTE select_receiver: Starting to select receiver ALFA 2010-Aug-19 23:36:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Aug-19 23:36:27 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Aug-19 23:36:27 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Aug-19 23:36:27 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-19 23:36:27 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-Aug-19 23:36:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-19 23:36:27 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Aug-19 23:36:27 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-19 23:36:27 START begin_task: Starting task 'waiting for receiver ALFA' 2010-Aug-19 23:36:27 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Aug-19 23:36:27 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-Aug-19 23:36:27 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Aug-19 23:36:27 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-Aug-19 23:36:27 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-Aug-19 23:36:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-19 23:36:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-19 23:36:27 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-19 23:36:27 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Aug-19 23:36:27 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-19 23:36:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-19 23:36:27 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Aug-19 23:36:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-19 23:36:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: alfafb 1 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-Aug-19 23:36:27 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Aug-19 23:36:27 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-Aug-19 23:36:27 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Aug-19 23:36:27 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Aug-19 23:36:27 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Aug-19 23:36:27 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Aug-19 23:36:27 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Aug-19 23:36:27 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Aug-19 23:36:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:36:28 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Aug-19 23:36:28 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-Aug-19 23:36:28 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Aug-19 23:36:28 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-Aug-19 23:36:28 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-Aug-19 23:36:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Aug-19 23:36:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:36:28 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Aug-19 23:36:28 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-Aug-19 23:36:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:36:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:43 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-19 23:36:43 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Aug-19 23:36:43 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Aug-19 23:36:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Aug-19 23:36:43 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Aug-19 23:36:43 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-19 23:36:43 DONE finish_task: DONE finished configuration: IF/LO path 2010-Aug-19 23:36:43 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-19 23:36:43 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Aug-19 23:36:43 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-19 23:36:43 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Aug-19 23:36:43 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-19 23:36:44 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Aug-19 23:36:44 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Aug-19 23:36:44 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Aug-19 23:36:44 START begin_task: Starting task 'selecting calibration port' 2010-Aug-19 23:36:44 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Aug-19 23:36:44 LOG3 vw_send: To DATATAKING: calport 3 2010-Aug-19 23:36:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Aug-19 23:36:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:36:44 START begin_task: Starting task 'waiting on calport' 2010-Aug-19 23:36:44 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-Aug-19 23:36:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:44 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Aug-19 23:36:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:36:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:44 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-19 23:36:44 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Aug-19 23:36:44 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-Aug-19 23:36:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Aug-19 23:36:44 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Aug-19 23:36:44 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Aug-19 23:36:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-19 23:36:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-19 23:36:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-19 23:36:44 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Aug-19 23:36:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-19 23:36:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-19 23:36:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-19 23:36:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-19 23:36:44 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Aug-19 23:36:44 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Aug-19 23:36:44 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Aug-19 23:36:44 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Aug-19 23:36:44 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Aug-19 23:36:44 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Aug-19 23:36:44 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Aug-19 23:36:44 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Aug-19 23:36:44 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Aug-19 23:36:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-19 23:36:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-19 23:36:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-19 23:36:44 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-19 23:36:44 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Aug-19 23:36:44 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Aug-19 23:36:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-19 23:36:44 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Aug-19 23:36:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-19 23:36:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-19 23:36:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-19 23:36:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-19 23:36:44 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Aug-19 23:36:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-19 23:36:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-19 23:36:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-19 23:36:44 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-19 23:36:45 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Aug-19 23:36:45 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-19 23:36:45 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Aug-19 23:36:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-19 23:36:45 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Aug-19 23:36:45 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-19 23:36:45 COMMAND run_command_line: EXECUTING command 8: 'CATALOG galfa_togs.cat' 2010-Aug-19 23:36:45 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/galfa_togs.cat' 2010-Aug-19 23:36:45 COMMAND run_command_line: EXECUTING command 9: 'SEEK galfasrc' 2010-Aug-19 23:36:45 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/galfa_togs.cat galfasrc nooffset wait' 2010-Aug-19 23:36:45 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2010-Aug-19 23:36:45 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-19 23:36:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2010-Aug-19 23:36:45 LOG3 track_source: Calling 'track_source galfasrc 180.0 4. F 0.0 0.0 main small /share/obs4/usr/a2010/galfa_togs.cat 0 Topocentric velocity(optical)' 2010-Aug-19 23:36:45 START begin_task: Starting task 'sending tracking commands' 2010-Aug-19 23:36:45 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-19 23:36:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2010-Aug-19 23:36:45 INFO1 track_source: Starting to track galfasrc 2010-Aug-19 23:36:45 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2010-Aug-19 23:36:45 LOG3 vw_send: To DATATAKING: set ra 180.0 2010-Aug-19 23:36:45 LOG3 vw_send: To DATATAKING: set dec 4. 2010-Aug-19 23:36:45 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-19 23:36:45 LOG3 vw_send: To DATATAKING: pnt tr 180.0 4. -CF 2010-Aug-19 23:36:45 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-19 23:36:45 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-19 23:36:45 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-19 23:36:45 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-19 23:36:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-19 23:36:45 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-19 23:36:45 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-19 23:36:45 START begin_task: Starting task 'waiting on telescope' 2010-Aug-19 23:36:45 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-19 23:36:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-19 23:36:45 LOG3 waittrk: Start waittrk 5 2010-Aug-19 23:36:45 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-19 23:36:45 LOG5 begin_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2010-Aug-19 23:36:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-19 23:36:45 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2010-Aug-19 23:36:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Aug-19 23:36:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Aug-19 23:36:45 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2010-Aug-19 23:36:45 LOG4 got_cormsg: From DATATAKING: set dec 4. 2010-Aug-19 23:36:45 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2010-Aug-19 23:36:45 LOG4 got_cormsg: From DATATAKING: vw% 4. 2010-Aug-19 23:36:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:45 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-19 23:36:45 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 4. -CF 2010-Aug-19 23:36:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-19 23:36:46 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-19 23:36:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:36:46 NOTE WAPPDATA-new_file: New FITS file: wapp.20100819.a2010.0000.fits 2010-Aug-19 23:36:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100819.a2010.0000.fits} 2010-Aug-19 23:36:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-19 23:36:50 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-19 23:36:50 LOG5 end_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2010-Aug-19 23:36:50 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-19 23:36:50 LOG5 begin_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2010-Aug-19 23:37:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-19 23:37:08 LOG5 end_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2010-Aug-19 23:37:08 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-19 23:37:08 INFO2 waittrk: Now tracking galfasrc 2010-Aug-19 23:37:08 LOG4 waittrk: Current telescope position: Az = 179.73 ZA = 4.02 2010-Aug-19 23:37:08 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-19 23:37:08 LOG5 finish_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-19 23:37:08 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-19 23:37:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-19 23:37:08 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-19 23:37:08 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-19 23:37:08 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2010-Aug-19 23:37:08 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-19 23:37:08 DONE finish_task: DONE finished tracking: source 'galfasrc' 2010-Aug-19 23:37:08 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-19 23:37:08 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2010-Aug-19 23:37:08 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-19 23:37:08 COMMAND run_command_line: EXECUTING command 10: 'TRACKCURPOS' 2010-Aug-19 23:37:08 BEGIN begin_task: Starting task 'tracking current position' 2010-Aug-19 23:37:08 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-19 23:37:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2010-Aug-19 23:37:08 INFO1 track_current_pos: Starting to track the current commanded position RA = 21:03:05.4 and Dec = +22:18:31.0 2010-Aug-19 23:37:08 LOG3 track_source: Calling 'track_source Cur-pos 210305.4 221831.0 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-Aug-19 23:37:08 START begin_task: Starting task 'sending tracking commands' 2010-Aug-19 23:37:08 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-19 23:37:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2010-Aug-19 23:37:08 INFO1 track_source: Starting to track Cur-pos 2010-Aug-19 23:37:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2010-Aug-19 23:37:08 LOG3 vw_send: To DATATAKING: set ra 210305.4 2010-Aug-19 23:37:08 LOG3 vw_send: To DATATAKING: set dec 221831.0 2010-Aug-19 23:37:08 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-19 23:37:08 LOG3 vw_send: To DATATAKING: pnt tr 210305.4 221831.0 -CJ 2010-Aug-19 23:37:08 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-19 23:37:08 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-19 23:37:08 LOG5 finish_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-19 23:37:08 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-19 23:37:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-19 23:37:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-19 23:37:08 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-19 23:37:08 START begin_task: Starting task 'waiting on telescope' 2010-Aug-19 23:37:08 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-19 23:37:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-19 23:37:08 LOG3 waittrk: Start waittrk 5 2010-Aug-19 23:37:08 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-19 23:37:08 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2010-Aug-19 23:37:08 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2010-Aug-19 23:37:08 LOG4 got_cormsg: From DATATAKING: set ra 210305.4 2010-Aug-19 23:37:08 LOG4 got_cormsg: From DATATAKING: set dec 221831.0 2010-Aug-19 23:37:08 LOG4 got_cormsg: From DATATAKING: vw% 210305.4 2010-Aug-19 23:37:08 LOG4 got_cormsg: From DATATAKING: vw% 221831.0 2010-Aug-19 23:37:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:37:08 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-19 23:37:08 LOG4 got_cormsg: From DATATAKING: pnt tr 210305.4 221831.0 -CJ 2010-Aug-19 23:37:08 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-19 23:37:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-19 23:37:09 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:37:13 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-19 23:37:13 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2010-Aug-19 23:37:13 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-19 23:37:13 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Aug-19 23:37:21 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-19 23:37:21 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Aug-19 23:37:21 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-19 23:37:21 INFO2 waittrk: Now tracking Cur-pos 2010-Aug-19 23:37:21 LOG4 waittrk: Current telescope position: Az = 179.01 ZA = 4.02 2010-Aug-19 23:37:21 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-19 23:37:21 LOG5 finish_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-19 23:37:21 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-19 23:37:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-19 23:37:21 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-19 23:37:21 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-19 23:37:21 STOP finish_task: Finishing task 'tracking current position' 2010-Aug-19 23:37:21 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-19 23:37:21 DONE finish_task: DONE finished tracking: current position 2010-Aug-19 23:37:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-19 23:37:21 END end_task: Finishing task 'tracking current position' with status 'OK' 2010-Aug-19 23:37:21 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-19 23:37:21 COMMAND run_command_line: EXECUTING command 11: 'ALFAANGLE 19.' 2010-Aug-19 23:37:21 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19. 2010-Aug-19 23:37:21 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-19 23:37:21 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-19 23:37:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-19 23:37:21 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-19 23:37:21 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19. REPLY 2010-Aug-19 23:37:21 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Aug-19 23:37:21 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Aug-19 23:37:21 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Aug-19 23:38:00 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-19 23:38:00 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-19 23:38:00 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Aug-19 23:38:00 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Aug-19 23:38:00 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Aug-19 23:38:00 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-19 23:38:00 LOG5 finish_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-19 23:38:00 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-19 23:38:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-19 23:38:00 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-19 23:38:00 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-19 23:38:00 COMMAND run_command_line: EXECUTING command 12: 'WAITTRACK' 2010-Aug-19 23:38:00 BEGIN begin_task: Starting task 'waiting on telescope' 2010-Aug-19 23:38:00 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-19 23:38:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-19 23:38:00 LOG3 waittrk: Start waittrk 5 2010-Aug-19 23:38:00 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-19 23:38:00 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Aug-19 23:38:06 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-19 23:38:06 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Aug-19 23:38:06 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-19 23:38:06 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Aug-19 23:38:06 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-19 23:38:06 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Aug-19 23:38:06 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Aug-19 23:38:06 INFO2 waittrk: Now tracking Cur-pos 2010-Aug-19 23:38:06 LOG4 waittrk: Current telescope position: Az = 176.52 ZA = 4.02 2010-Aug-19 23:38:06 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-19 23:38:06 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-19 23:38:06 DONE finish_task: DONE finished waiting: telescope on source 2010-Aug-19 23:38:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-19 23:38:06 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-19 23:38:06 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-19 23:38:06 COMMAND run_command_line: EXECUTING command 16: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-Aug-19 23:38:06 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-Aug-19 23:38:06 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-19 23:38:06 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-Aug-19 23:38:06 BEGIN begin_task: Starting task 'smart frequency switching' 2010-Aug-19 23:38:06 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-19 23:38:06 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2010-Aug-19 23:38:06 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-Aug-19 23:38:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-Aug-19 23:38:06 START begin_task: Starting task 'selecting calibration type' 2010-Aug-19 23:38:06 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Aug-19 23:38:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-19 23:38:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-19 23:38:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:38:06 START begin_task: Starting task 'waiting on setcal' 2010-Aug-19 23:38:06 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2010-Aug-19 23:38:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-19 23:38:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:38:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:38:07 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-19 23:38:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-19 23:38:07 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2010-Aug-19 23:38:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-19 23:38:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-19 23:38:07 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-19 23:38:07 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-19 23:38:07 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Aug-19 23:38:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:38:08 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-19 23:38:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-19 23:38:08 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Aug-19 23:38:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-19 23:38:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-19 23:38:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-19 23:38:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-19 23:38:08 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-19 23:38:08 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-Aug-19 23:38:08 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-19 23:38:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-19 23:38:08 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-Aug-19 23:38:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-19 23:38:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-19 23:38:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-19 23:38:08 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Aug-19 23:38:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-19 23:38:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-19 23:38:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-19 23:38:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-19 23:38:08 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20100819.a2010.0000.fits' is empty! 2010-Aug-19 23:38:08 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-Aug-19 23:38:08 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Aug-19 23:38:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Aug-19 23:38:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-19 23:38:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-19 23:38:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-19 23:38:08 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Aug-19 23:38:08 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-19 23:38:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-19 23:38:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-19 23:38:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-19 23:38:08 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Aug-19 23:38:08 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Aug-19 23:38:08 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-19 23:38:08 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-19 23:38:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Aug-19 23:38:08 INFO2 adjust_power: Starting to adjust WAPP power 2010-Aug-19 23:38:08 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Aug-19 23:38:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Aug-19 23:38:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:38:08 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Aug-19 23:38:08 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Aug-19 23:38:08 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Aug-19 23:38:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:38:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-19 23:38:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:38:11 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-19 23:38:11 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Aug-19 23:38:11 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Aug-19 23:38:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Aug-19 23:38:11 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-19 23:38:11 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-19 23:38:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Aug-19 23:38:11 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-19 23:38:11 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-19 23:38:11 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-19 23:38:12 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-19 23:38:12 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Aug-19 23:38:12 LOG5 begin_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2010-Aug-19 23:38:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Aug-19 23:38:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:38:12 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Aug-19 23:38:12 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 5 dB 2010-Aug-19 23:38:12 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 3 3 dB 2010-Aug-19 23:38:12 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Aug-19 23:38:12 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Aug-19 23:38:12 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Aug-19 23:38:12 LOG5 end_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2010-Aug-19 23:38:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.888 0.943 ALFA beam 1: 0.955 1.001 2010-Aug-19 23:38:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.962 0.898 ALFA beam 3: 1.057 0.965 2010-Aug-19 23:38:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.091 0.870 ALFA beam 5: 1.095 1.085 2010-Aug-19 23:38:12 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.900 0.839 ALFA beam 7: 0.989 0.992 2010-Aug-19 23:38:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-19 23:38:12 LOG5 finish_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-19 23:38:12 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Aug-19 23:38:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-19 23:38:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-19 23:38:12 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-19 23:38:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-19 23:38:12 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-19 23:38:12 LOG5 finish_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-19 23:38:12 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Aug-19 23:38:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-19 23:38:12 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-19 23:38:12 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-19 23:38:12 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-Aug-19 23:38:12 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-19 23:38:12 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-19 23:38:12 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:38:12 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63514 J 2010-Aug-19 23:38:12 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:38:12 LOG2 antvel: Parameters to Doppler: Topocentric 99492 2010 231 0.0 2010-Aug-19 23:38:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:38:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-19 23:38:12 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-19 23:38:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:38:12 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:38:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-19 23:38:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:38:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-Aug-19 23:38:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:38:12 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Aug-19 23:38:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-19 23:38:12 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.077882 2010.6351399345958 18.999933 2010-Aug-19 23:38:12 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000015 22.308611111111112 2010-Aug-19 23:38:12 LOG4 log_alfabeam: ALFABEAM 1 21.053209058061345 22.205184076301833 2010-Aug-19 23:38:12 LOG4 log_alfabeam: ALFABEAM 2 21.057825537776573 22.278557012633282 2010-Aug-19 23:38:12 LOG4 log_alfabeam: ALFABEAM 3 21.056225561414248 22.382373197509740 2010-Aug-19 23:38:12 LOG4 log_alfabeam: ALFABEAM 4 21.049723254638273 22.411899334552260 2010-Aug-19 23:38:12 LOG4 log_alfabeam: ALFABEAM 5 21.045072923382989 22.336654549553291 2010-Aug-19 23:38:12 LOG4 log_alfabeam: ALFABEAM 6 21.046957940934320 22.233791681982158 2010-Aug-19 23:38:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100095 2010-Aug-19 23:38:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:38:13 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Aug-19 23:38:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:38:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-19 23:38:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:38:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:38:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:38:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-19 23:38:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13094.00 2010-Aug-19 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:38:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:38:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:38:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:38:24 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Aug-19 23:38:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:38:24 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Aug-19 23:38:24 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-Aug-19 23:38:24 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-19 23:38:24 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-19 23:38:24 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:38:24 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63514 J 2010-Aug-19 23:38:24 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:38:24 LOG2 antvel: Parameters to Doppler: Topocentric 99504 2010 231 0.0 2010-Aug-19 23:38:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:38:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-19 23:38:24 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-19 23:38:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:38:24 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:38:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-19 23:38:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:38:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-Aug-19 23:38:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:38:24 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Aug-19 23:38:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-19 23:38:24 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.081224 2010.6351403148528 18.999933 2010-Aug-19 23:38:24 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000043 22.308611111111109 2010-Aug-19 23:38:24 LOG4 log_alfabeam: ALFABEAM 1 21.053297248201893 22.205472535875568 2010-Aug-19 23:38:24 LOG4 log_alfabeam: ALFABEAM 2 21.057850824817205 22.279600478285875 2010-Aug-19 23:38:24 LOG4 log_alfabeam: ALFABEAM 3 21.056162127624606 22.383145798306170 2010-Aug-19 23:38:24 LOG4 log_alfabeam: ALFABEAM 4 21.049635115148888 22.411599860264417 2010-Aug-19 23:38:24 LOG4 log_alfabeam: ALFABEAM 5 21.045049479668105 22.335596159095900 2010-Aug-19 23:38:24 LOG4 log_alfabeam: ALFABEAM 6 21.047022072987268 22.233050165706839 2010-Aug-19 23:38:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100096 2010-Aug-19 23:38:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:38:25 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-Aug-19 23:38:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:38:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-19 23:38:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:38:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:38:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:38:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-19 23:38:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13106.00 2010-Aug-19 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:38:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:38:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:38:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:38:36 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-Aug-19 23:38:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:38:36 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Aug-19 23:38:36 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-Aug-19 23:38:36 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-19 23:38:36 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-19 23:38:36 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:38:36 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63514 J 2010-Aug-19 23:38:36 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:38:36 LOG2 antvel: Parameters to Doppler: Topocentric 99516 2010 231 0.0 2010-Aug-19 23:38:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:38:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-19 23:38:36 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-19 23:38:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:38:36 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:38:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-19 23:38:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:38:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-Aug-19 23:38:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:38:36 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Aug-19 23:38:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-19 23:38:36 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.084567 2010.6351406951098 18.999933 2010-Aug-19 23:38:36 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000075 22.308611111111105 2010-Aug-19 23:38:36 LOG4 log_alfabeam: ALFABEAM 1 21.053385061985818 22.205775042667931 2010-Aug-19 23:38:36 LOG4 log_alfabeam: ALFABEAM 2 21.057875190211927 22.280646632536499 2010-Aug-19 23:38:36 LOG4 log_alfabeam: ALFABEAM 3 21.056098119054457 22.383906857615028 2010-Aug-19 23:38:36 LOG4 log_alfabeam: ALFABEAM 4 21.049547371230190 22.411286394257246 2010-Aug-19 23:38:36 LOG4 log_alfabeam: ALFABEAM 5 21.045026980235587 22.334535690476887 2010-Aug-19 23:38:36 LOG4 log_alfabeam: ALFABEAM 6 21.047086724832869 22.232320365675182 2010-Aug-19 23:38:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100097 2010-Aug-19 23:38:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:38:37 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-Aug-19 23:38:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:38:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-19 23:38:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:38:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:38:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:38:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-19 23:38:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13118.00 2010-Aug-19 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:38:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:38:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:38:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:38:48 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-Aug-19 23:38:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:38:48 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Aug-19 23:38:48 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-Aug-19 23:38:48 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-19 23:38:48 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-19 23:38:48 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:38:48 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63514 J 2010-Aug-19 23:38:48 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:38:48 LOG2 antvel: Parameters to Doppler: Topocentric 99528 2010 231 0.0 2010-Aug-19 23:38:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:38:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-19 23:38:48 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-19 23:38:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:38:48 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:38:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-19 23:38:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:38:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-Aug-19 23:38:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:38:48 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Aug-19 23:38:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-19 23:38:48 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.087909 2010.6351410753668 18.999933 2010-Aug-19 23:38:48 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000107 22.308611111111123 2010-Aug-19 23:38:48 LOG4 log_alfabeam: ALFABEAM 1 21.053472412876960 22.206091213680327 2010-Aug-19 23:38:48 LOG4 log_alfabeam: ALFABEAM 2 21.057898614219503 22.281694406864158 2010-Aug-19 23:38:48 LOG4 log_alfabeam: ALFABEAM 3 21.056033603456747 22.384655666214574 2010-Aug-19 23:38:48 LOG4 log_alfabeam: ALFABEAM 4 21.049460109209576 22.410959334761426 2010-Aug-19 23:38:48 LOG4 log_alfabeam: ALFABEAM 5 21.045005442048172 22.333474229020140 2010-Aug-19 23:38:48 LOG4 log_alfabeam: ALFABEAM 6 21.047151828121528 22.231602945749067 2010-Aug-19 23:38:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100098 2010-Aug-19 23:38:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:38:49 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-Aug-19 23:38:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-19 23:38:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:38:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:38:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:38:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:38:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-19 23:38:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13130.00 2010-Aug-19 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:38:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:39:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:39:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:39:00 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-Aug-19 23:39:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:39:00 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Aug-19 23:39:00 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-Aug-19 23:39:00 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-19 23:39:00 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-19 23:39:00 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:39:00 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63514 J 2010-Aug-19 23:39:00 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:39:00 LOG2 antvel: Parameters to Doppler: Topocentric 99540 2010 231 0.0 2010-Aug-19 23:39:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:39:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-19 23:39:00 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-19 23:39:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:39:00 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:39:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-19 23:39:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:39:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-Aug-19 23:39:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:39:00 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-Aug-19 23:39:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-19 23:39:00 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.091252 2010.6351414556239 18.999933 2010-Aug-19 23:39:00 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000051 22.308611111111119 2010-Aug-19 23:39:00 LOG4 log_alfabeam: ALFABEAM 1 21.053559319875287 22.206421020612964 2010-Aug-19 23:39:00 LOG4 log_alfabeam: ALFABEAM 2 21.057921106852369 22.282743985779419 2010-Aug-19 23:39:00 LOG4 log_alfabeam: ALFABEAM 3 21.055968572157781 22.385392434360281 2010-Aug-19 23:39:00 LOG4 log_alfabeam: ALFABEAM 4 21.049373309944116 22.410618712058081 2010-Aug-19 23:39:00 LOG4 log_alfabeam: ALFABEAM 5 21.044984854540530 22.332411589178204 2010-Aug-19 23:39:00 LOG4 log_alfabeam: ALFABEAM 6 21.047217391759290 22.230897687779873 2010-Aug-19 23:39:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100099 2010-Aug-19 23:39:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:39:01 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Aug-19 23:39:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:39:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-19 23:39:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:39:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:39:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:39:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-19 23:39:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13142.00 2010-Aug-19 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:39:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:39:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:39:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:39:12 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Aug-19 23:39:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:39:12 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-Aug-19 23:39:12 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-Aug-19 23:39:12 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-19 23:39:12 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-19 23:39:12 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:39:12 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63514 J 2010-Aug-19 23:39:12 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:39:12 LOG2 antvel: Parameters to Doppler: Topocentric 99552 2010 231 0.0 2010-Aug-19 23:39:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:39:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-19 23:39:12 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-19 23:39:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:39:12 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:39:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-19 23:39:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:39:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-Aug-19 23:39:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:39:12 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Aug-19 23:39:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-19 23:39:12 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.094594 2010.6351418358811 18.999933 2010-Aug-19 23:39:12 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000029 22.308611111111119 2010-Aug-19 23:39:12 LOG4 log_alfabeam: ALFABEAM 1 21.053645698523603 22.206764033936793 2010-Aug-19 23:39:12 LOG4 log_alfabeam: ALFABEAM 2 21.057942651805902 22.283794300209816 2010-Aug-19 23:39:12 LOG4 log_alfabeam: ALFABEAM 3 21.055903094384771 22.386116499960576 2010-Aug-19 23:39:12 LOG4 log_alfabeam: ALFABEAM 4 21.049287057601525 22.410264970437993 2010-Aug-19 23:39:12 LOG4 log_alfabeam: ALFABEAM 5 21.044965231180583 22.331348853892869 2010-Aug-19 23:39:12 LOG4 log_alfabeam: ALFABEAM 6 21.047283346173412 22.230205208404755 2010-Aug-19 23:39:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100100 2010-Aug-19 23:39:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:39:13 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Aug-19 23:39:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:39:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-19 23:39:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:39:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:39:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:39:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-19 23:39:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13154.00 2010-Aug-19 23:39:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:39:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:39:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:39:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:39:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:39:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:39:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:39:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:39:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:39:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:39:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:39:24 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Aug-19 23:39:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:39:24 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Aug-19 23:39:24 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-Aug-19 23:39:24 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-19 23:39:24 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-19 23:39:24 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:39:24 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63514 J 2010-Aug-19 23:39:24 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:39:24 LOG2 antvel: Parameters to Doppler: Topocentric 99564 2010 231 0.0 2010-Aug-19 23:39:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:39:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-19 23:39:24 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-19 23:39:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:39:24 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:39:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-19 23:39:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:39:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-Aug-19 23:39:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:39:24 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Aug-19 23:39:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-19 23:39:24 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.097937 2010.6351422161381 18.999933 2010-Aug-19 23:39:24 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000058 22.308611111111112 2010-Aug-19 23:39:24 LOG4 log_alfabeam: ALFABEAM 1 21.053731568893799 22.207120212471544 2010-Aug-19 23:39:24 LOG4 log_alfabeam: ALFABEAM 2 21.057963260273443 22.284845539480759 2010-Aug-19 23:39:24 LOG4 log_alfabeam: ALFABEAM 3 21.055837161616680 22.386828091663542 2010-Aug-19 23:39:24 LOG4 log_alfabeam: ALFABEAM 4 21.049201331931940 22.409898152732733 2010-Aug-19 23:39:24 LOG4 log_alfabeam: ALFABEAM 5 21.044946560217390 22.330285831364474 2010-Aug-19 23:39:24 LOG4 log_alfabeam: ALFABEAM 6 21.047349700233418 22.229525271400384 2010-Aug-19 23:39:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100101 2010-Aug-19 23:39:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:39:25 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-Aug-19 23:39:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:39:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-19 23:39:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:39:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:39:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:39:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-19 23:39:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13166.00 2010-Aug-19 23:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:39:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:39:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:39:36 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-Aug-19 23:39:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:39:36 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Aug-19 23:39:36 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Aug-19 23:39:36 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-19 23:39:36 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-19 23:39:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-19 23:39:36 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Aug-19 23:39:36 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-19 23:39:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-19 23:39:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-19 23:39:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-19 23:39:36 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Aug-19 23:39:36 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-Aug-19 23:39:36 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-19 23:39:36 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-19 23:39:36 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:39:36 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63514 J 2010-Aug-19 23:39:36 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:39:36 LOG2 antvel: Parameters to Doppler: Topocentric 99576 2010 231 0.0 2010-Aug-19 23:39:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:39:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-19 23:39:36 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-19 23:39:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:39:36 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:39:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-19 23:39:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:39:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-Aug-19 23:39:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:39:36 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Aug-19 23:39:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-Aug-19 23:39:36 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.101279 2010.6351425963951 18.999933 2010-Aug-19 23:39:36 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000043 22.308611111111119 2010-Aug-19 23:39:36 LOG4 log_alfabeam: ALFABEAM 1 21.053816848914018 22.207489083325068 2010-Aug-19 23:39:36 LOG4 log_alfabeam: ALFABEAM 2 21.057982919363802 22.285896638582958 2010-Aug-19 23:39:36 LOG4 log_alfabeam: ALFABEAM 3 21.055770844213363 22.387526596096730 2010-Aug-19 23:39:36 LOG4 log_alfabeam: ALFABEAM 4 21.049116214640588 22.409518746026063 2010-Aug-19 23:39:36 LOG4 log_alfabeam: ALFABEAM 5 21.044928851670910 22.329223597511383 2010-Aug-19 23:39:36 LOG4 log_alfabeam: ALFABEAM 6 21.047416383479682 22.228858444939231 2010-Aug-19 23:39:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100102 2010-Aug-19 23:39:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:39:37 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-Aug-19 23:39:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:39:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-19 23:39:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:39:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:39:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:39:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-19 23:39:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13178.00 2010-Aug-19 23:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:39:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:39:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:39:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:39:48 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-Aug-19 23:39:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:39:48 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Aug-19 23:39:48 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-Aug-19 23:39:48 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-19 23:39:48 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-19 23:39:48 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:39:48 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63514 J 2010-Aug-19 23:39:48 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:39:48 LOG2 antvel: Parameters to Doppler: Topocentric 99588 2010 231 0.0 2010-Aug-19 23:39:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:39:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-19 23:39:48 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-19 23:39:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:39:48 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:39:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-19 23:39:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:39:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-Aug-19 23:39:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:39:48 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Aug-19 23:39:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-Aug-19 23:39:48 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.104622 2010.6351429766521 18.999933 2010-Aug-19 23:39:48 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000008 22.308611111111109 2010-Aug-19 23:39:48 LOG4 log_alfabeam: ALFABEAM 1 21.053901559867459 22.207870594615265 2010-Aug-19 23:39:48 LOG4 log_alfabeam: ALFABEAM 2 21.058001641402441 22.286947794093479 2010-Aug-19 23:39:48 LOG4 log_alfabeam: ALFABEAM 3 21.055704133610558 22.388212260633139 2010-Aug-19 23:39:48 LOG4 log_alfabeam: ALFABEAM 4 21.049031684235526 22.409126803465576 2010-Aug-19 23:39:48 LOG4 log_alfabeam: ALFABEAM 5 21.044912092669001 22.328161951862576 2010-Aug-19 23:39:48 LOG4 log_alfabeam: ALFABEAM 6 21.047483404935885 22.228204474606660 2010-Aug-19 23:39:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100103 2010-Aug-19 23:39:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:39:49 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Aug-19 23:39:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:39:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-19 23:39:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:39:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:39:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:39:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-19 23:39:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13190.00 2010-Aug-19 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:39:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:40:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:40:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:40:00 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Aug-19 23:40:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:40:00 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Aug-19 23:40:00 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-Aug-19 23:40:00 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-19 23:40:00 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-19 23:40:00 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:40:00 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63514 J 2010-Aug-19 23:40:00 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:40:00 LOG2 antvel: Parameters to Doppler: Topocentric 99600 2010 231 0.0 2010-Aug-19 23:40:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:40:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-19 23:40:00 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-19 23:40:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:40:00 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:40:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-19 23:40:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:40:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-Aug-19 23:40:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:40:00 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Aug-19 23:40:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-Aug-19 23:40:00 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.107964 2010.6351433569091 18.999933 2010-Aug-19 23:40:00 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000015 22.308611111111119 2010-Aug-19 23:40:00 LOG4 log_alfabeam: ALFABEAM 1 21.053985622339397 22.208264233614045 2010-Aug-19 23:40:00 LOG4 log_alfabeam: ALFABEAM 2 21.058019416853227 22.287997949507389 2010-Aug-19 23:40:00 LOG4 log_alfabeam: ALFABEAM 3 21.055637100958254 22.388884521652695 2010-Aug-19 23:40:00 LOG4 log_alfabeam: ALFABEAM 4 21.048947819693211 22.408722851312099 2010-Aug-19 23:40:00 LOG4 log_alfabeam: ALFABEAM 5 21.044896289864607 22.327101958886082 2010-Aug-19 23:40:00 LOG4 log_alfabeam: ALFABEAM 6 21.047550693591909 22.227563879410692 2010-Aug-19 23:40:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100104 2010-Aug-19 23:40:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:40:01 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Aug-19 23:40:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:40:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-19 23:40:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:40:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:40:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:40:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-19 23:40:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13202.00 2010-Aug-19 23:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:40:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:40:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:40:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:40:12 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Aug-19 23:40:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:40:12 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Aug-19 23:40:12 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-Aug-19 23:40:12 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-19 23:40:12 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-19 23:40:12 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:40:12 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63514 J 2010-Aug-19 23:40:12 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:40:12 LOG2 antvel: Parameters to Doppler: Topocentric 99612 2010 231 0.0 2010-Aug-19 23:40:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:40:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-19 23:40:12 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-19 23:40:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:40:12 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:40:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-19 23:40:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:40:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-Aug-19 23:40:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:40:12 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Aug-19 23:40:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-Aug-19 23:40:12 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.111306 2010.6351437371663 18.999933 2010-Aug-19 23:40:12 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000015 22.308611111111119 2010-Aug-19 23:40:12 LOG4 log_alfabeam: ALFABEAM 1 21.054069034078150 22.208669816997968 2010-Aug-19 23:40:12 LOG4 log_alfabeam: ALFABEAM 2 21.058036254203426 22.289046997224514 2010-Aug-19 23:40:12 LOG4 log_alfabeam: ALFABEAM 3 21.055569757649756 22.389543450035340 2010-Aug-19 23:40:12 LOG4 log_alfabeam: ALFABEAM 4 21.048864622963173 22.408307076752610 2010-Aug-19 23:40:12 LOG4 log_alfabeam: ALFABEAM 5 21.044881433655341 22.326043723567345 2010-Aug-19 23:40:12 LOG4 log_alfabeam: ALFABEAM 6 21.047618238564613 22.226936572709594 2010-Aug-19 23:40:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100105 2010-Aug-19 23:40:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:40:13 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-Aug-19 23:40:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:40:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-19 23:40:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:40:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:40:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:40:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-19 23:40:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13214.00 2010-Aug-19 23:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:40:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:40:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:40:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:40:24 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-Aug-19 23:40:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:40:24 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Aug-19 23:40:24 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-Aug-19 23:40:24 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-19 23:40:24 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-19 23:40:24 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:40:24 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63514 J 2010-Aug-19 23:40:24 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:40:24 LOG2 antvel: Parameters to Doppler: Topocentric 99624 2010 231 0.0 2010-Aug-19 23:40:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:40:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-19 23:40:24 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-19 23:40:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:40:24 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:40:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-19 23:40:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:40:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-Aug-19 23:40:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:40:24 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Aug-19 23:40:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-Aug-19 23:40:24 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.114649 2010.6351441174234 18.999933 2010-Aug-19 23:40:24 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000107 22.308611111111119 2010-Aug-19 23:40:24 LOG4 log_alfabeam: ALFABEAM 1 21.054151793137571 22.209087165367407 2010-Aug-19 23:40:24 LOG4 log_alfabeam: ALFABEAM 2 21.058052161875171 22.290094834518758 2010-Aug-19 23:40:24 LOG4 log_alfabeam: ALFABEAM 3 21.055502114703430 22.390189117872115 2010-Aug-19 23:40:24 LOG4 log_alfabeam: ALFABEAM 4 21.048782095687908 22.407879662892935 2010-Aug-19 23:40:24 LOG4 log_alfabeam: ALFABEAM 5 21.044867514527166 22.324987345746926 2010-Aug-19 23:40:24 LOG4 log_alfabeam: ALFABEAM 6 21.047686029361042 22.226322467058804 2010-Aug-19 23:40:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100106 2010-Aug-19 23:40:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:40:25 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Aug-19 23:40:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:40:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-19 23:40:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:40:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:40:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:40:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-19 23:40:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13226.00 2010-Aug-19 23:40:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:40:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:40:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:40:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:40:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:40:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:40:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:40:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:40:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:40:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:40:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:40:36 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Aug-19 23:40:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:40:36 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Aug-19 23:40:36 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-Aug-19 23:40:36 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-19 23:40:36 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-19 23:40:36 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:40:36 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63514 J 2010-Aug-19 23:40:36 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:40:36 LOG2 antvel: Parameters to Doppler: Topocentric 99636 2010 231 0.0 2010-Aug-19 23:40:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:40:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-19 23:40:36 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-19 23:40:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:40:36 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:40:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-19 23:40:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:40:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-Aug-19 23:40:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:40:36 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Aug-19 23:40:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-Aug-19 23:40:36 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.117991 2010.6351444976804 18.999933 2010-Aug-19 23:40:36 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000065 22.308611111111123 2010-Aug-19 23:40:36 LOG4 log_alfabeam: ALFABEAM 1 21.054233824518285 22.209515713462920 2010-Aug-19 23:40:36 LOG4 log_alfabeam: ALFABEAM 2 21.058067135184931 22.291140425428992 2010-Aug-19 23:40:36 LOG4 log_alfabeam: ALFABEAM 3 21.055434243820621 22.390821036907965 2010-Aug-19 23:40:36 LOG4 log_alfabeam: ALFABEAM 4 21.048700312332148 22.407441187398199 2010-Aug-19 23:40:36 LOG4 log_alfabeam: ALFABEAM 5 21.044854534302651 22.323933865040850 2010-Aug-19 23:40:36 LOG4 log_alfabeam: ALFABEAM 6 21.047753994758583 22.225722007560076 2010-Aug-19 23:40:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100107 2010-Aug-19 23:40:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:40:37 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Aug-19 23:40:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:40:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-19 23:40:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:40:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:40:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:40:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-19 23:40:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13238.00 2010-Aug-19 23:40:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:40:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:40:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:40:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:40:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:40:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:40:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:40:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:40:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:40:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:40:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:40:48 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Aug-19 23:40:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:40:48 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Aug-19 23:40:48 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-Aug-19 23:40:48 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-19 23:40:48 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-19 23:40:48 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:40:48 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63514 J 2010-Aug-19 23:40:48 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:40:48 LOG2 antvel: Parameters to Doppler: Topocentric 99648 2010 231 0.0 2010-Aug-19 23:40:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:40:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-19 23:40:48 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-19 23:40:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:40:48 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:40:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-19 23:40:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:40:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-Aug-19 23:40:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:40:48 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Aug-19 23:40:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-Aug-19 23:40:48 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.121334 2010.6351448779374 18.999933 2010-Aug-19 23:40:48 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000015 22.308611111111119 2010-Aug-19 23:40:48 LOG4 log_alfabeam: ALFABEAM 1 21.054315152960790 22.209955393334013 2010-Aug-19 23:40:48 LOG4 log_alfabeam: ALFABEAM 2 21.058081188928231 22.292183994063304 2010-Aug-19 23:40:48 LOG4 log_alfabeam: ALFABEAM 3 21.055366135500385 22.391439500247095 2010-Aug-19 23:40:48 LOG4 log_alfabeam: ALFABEAM 4 21.048619247889000 22.406991718339050 2010-Aug-19 23:40:48 LOG4 log_alfabeam: ALFABEAM 5 21.044842477728277 22.322883050162893 2010-Aug-19 23:40:48 LOG4 log_alfabeam: ALFABEAM 6 21.047822144956555 22.225134896226560 2010-Aug-19 23:40:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100108 2010-Aug-19 23:40:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:40:49 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Aug-19 23:40:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:40:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-19 23:40:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:40:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:40:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:40:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-19 23:40:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13250.00 2010-Aug-19 23:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:41:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:41:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:41:00 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Aug-19 23:41:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:41:00 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Aug-19 23:41:00 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2010-Aug-19 23:41:00 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Aug-19 23:41:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Aug-19 23:41:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-19 23:41:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-19 23:41:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-19 23:41:00 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Aug-19 23:41:00 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-19 23:41:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-19 23:41:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-19 23:41:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-19 23:41:00 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Aug-19 23:41:00 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Aug-19 23:41:00 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-Aug-19 23:41:00 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-19 23:41:00 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-19 23:41:00 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:41:00 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63515 J 2010-Aug-19 23:41:00 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:41:00 LOG2 antvel: Parameters to Doppler: Topocentric 99660 2010 231 0.0 2010-Aug-19 23:41:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:41:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-19 23:41:00 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-19 23:41:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:41:00 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:41:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-19 23:41:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:41:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-Aug-19 23:41:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:41:00 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-Aug-19 23:41:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-19 23:41:00 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.124676 2010.6351452581944 18.999933 2010-Aug-19 23:41:00 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000015 22.308611111111119 2010-Aug-19 23:41:00 LOG4 log_alfabeam: ALFABEAM 1 21.054395706639166 22.210405609789881 2010-Aug-19 23:41:00 LOG4 log_alfabeam: ALFABEAM 2 21.058094321495567 22.293224522899834 2010-Aug-19 23:41:00 LOG4 log_alfabeam: ALFABEAM 3 21.055297861403719 22.392044069610332 2010-Aug-19 23:41:00 LOG4 log_alfabeam: ALFABEAM 4 21.048538973594265 22.406531862487512 2010-Aug-19 23:41:00 LOG4 log_alfabeam: ALFABEAM 5 21.044831343593398 22.321835919542284 2010-Aug-19 23:41:00 LOG4 log_alfabeam: ALFABEAM 6 21.047890408981775 22.224561529500747 2010-Aug-19 23:41:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100109 2010-Aug-19 23:41:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:41:01 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-Aug-19 23:41:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:41:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-19 23:41:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:41:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:41:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:41:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-19 23:41:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13262.00 2010-Aug-19 23:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:41:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:41:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:41:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:41:12 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-Aug-19 23:41:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:41:12 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-Aug-19 23:41:12 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-Aug-19 23:41:12 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-19 23:41:12 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-19 23:41:12 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:41:12 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63515 J 2010-Aug-19 23:41:12 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:41:12 LOG2 antvel: Parameters to Doppler: Topocentric 99672 2010 231 0.0 2010-Aug-19 23:41:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:41:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-19 23:41:12 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-19 23:41:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:41:12 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:41:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-19 23:41:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:41:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-Aug-19 23:41:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:41:12 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Aug-19 23:41:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-19 23:41:12 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.128019 2010.6351456384516 18.999933 2010-Aug-19 23:41:12 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000040 22.308611111111126 2010-Aug-19 23:41:12 LOG4 log_alfabeam: ALFABEAM 1 21.054475511773102 22.210866292967829 2010-Aug-19 23:41:12 LOG4 log_alfabeam: ALFABEAM 2 21.058106548478285 22.294262250170174 2010-Aug-19 23:41:12 LOG4 log_alfabeam: ALFABEAM 3 21.055229411350759 22.392635055022708 2010-Aug-19 23:41:12 LOG4 log_alfabeam: ALFABEAM 4 21.048459462947321 22.406061689323778 2010-Aug-19 23:41:12 LOG4 log_alfabeam: ALFABEAM 5 21.044821115905304 22.320792226626700 2010-Aug-19 23:41:12 LOG4 log_alfabeam: ALFABEAM 6 21.047958797788908 22.224001593607728 2010-Aug-19 23:41:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100110 2010-Aug-19 23:41:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:41:13 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Aug-19 23:41:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:41:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-19 23:41:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:41:13 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-19 23:41:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-19 23:41:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13274.00 2010-Aug-19 23:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:41:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:41:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:41:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:41:24 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Aug-19 23:41:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:41:24 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Aug-19 23:41:24 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-Aug-19 23:41:24 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-19 23:41:24 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-19 23:41:24 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:41:24 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63515 J 2010-Aug-19 23:41:24 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:41:24 LOG2 antvel: Parameters to Doppler: Topocentric 99684 2010 231 0.0 2010-Aug-19 23:41:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:41:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-19 23:41:24 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-19 23:41:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:41:24 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:41:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-19 23:41:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:41:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-Aug-19 23:41:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:41:24 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Aug-19 23:41:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-19 23:41:24 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.131361 2010.6351460187086 18.999933 2010-Aug-19 23:41:24 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000026 22.308611111111119 2010-Aug-19 23:41:24 LOG4 log_alfabeam: ALFABEAM 1 21.054554499846784 22.211336821940911 2010-Aug-19 23:41:24 LOG4 log_alfabeam: ALFABEAM 2 21.058117871183484 22.295296180169132 2010-Aug-19 23:41:24 LOG4 log_alfabeam: ALFABEAM 3 21.055160856653981 22.393212067397950 2010-Aug-19 23:41:24 LOG4 log_alfabeam: ALFABEAM 4 21.048380783825134 22.405581830489645 2010-Aug-19 23:41:24 LOG4 log_alfabeam: ALFABEAM 5 21.044811790595890 22.319752965416413 2010-Aug-19 23:41:24 LOG4 log_alfabeam: ALFABEAM 6 21.048027240946222 22.223455437351628 2010-Aug-19 23:41:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100111 2010-Aug-19 23:41:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:41:25 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Aug-19 23:41:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:41:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-19 23:41:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:41:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:41:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:41:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-19 23:41:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13286.00 2010-Aug-19 23:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:41:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:41:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:41:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:41:36 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Aug-19 23:41:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:41:36 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Aug-19 23:41:36 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-Aug-19 23:41:36 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-19 23:41:36 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-19 23:41:36 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:41:36 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63515 J 2010-Aug-19 23:41:36 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:41:36 LOG2 antvel: Parameters to Doppler: Topocentric 99696 2010 231 0.0 2010-Aug-19 23:41:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:41:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-19 23:41:36 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-19 23:41:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:41:36 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:41:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-19 23:41:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:41:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-Aug-19 23:41:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:41:36 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Aug-19 23:41:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-19 23:41:36 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.134704 2010.6351463989656 18.999933 2010-Aug-19 23:41:36 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000026 22.308611111111112 2010-Aug-19 23:41:36 LOG4 log_alfabeam: ALFABEAM 1 21.054632698570998 22.211817127527201 2010-Aug-19 23:41:36 LOG4 log_alfabeam: ALFABEAM 2 21.058128305867186 22.296326566597205 2010-Aug-19 23:41:36 LOG4 log_alfabeam: ALFABEAM 3 21.055092186302534 22.393775432425379 2010-Aug-19 23:41:36 LOG4 log_alfabeam: ALFABEAM 4 21.048302908226699 22.405092354272224 2010-Aug-19 23:41:36 LOG4 log_alfabeam: ALFABEAM 5 21.044803351074393 22.318717872875187 2010-Aug-19 23:41:36 LOG4 log_alfabeam: ALFABEAM 6 21.048095750302728 22.222922732539470 2010-Aug-19 23:41:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100112 2010-Aug-19 23:41:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:41:37 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-Aug-19 23:41:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:41:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-19 23:41:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:41:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:41:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:41:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-19 23:41:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13298.00 2010-Aug-19 23:41:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:41:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:41:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:41:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:41:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:41:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:41:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:41:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:41:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:41:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:41:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:41:48 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-Aug-19 23:41:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:41:48 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Aug-19 23:41:48 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-Aug-19 23:41:48 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-19 23:41:48 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-19 23:41:48 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:41:48 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63515 J 2010-Aug-19 23:41:48 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:41:48 LOG2 antvel: Parameters to Doppler: Topocentric 99708 2010 231 0.0 2010-Aug-19 23:41:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:41:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-19 23:41:48 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-19 23:41:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:41:48 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:41:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-19 23:41:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:41:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-Aug-19 23:41:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:41:48 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Aug-19 23:41:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-19 23:41:48 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.138046 2010.6351467792226 18.999933 2010-Aug-19 23:41:48 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000026 22.308611111111119 2010-Aug-19 23:41:48 LOG4 log_alfabeam: ALFABEAM 1 21.054710042837808 22.212306567279690 2010-Aug-19 23:41:48 LOG4 log_alfabeam: ALFABEAM 2 21.058137856575900 22.297352438549929 2010-Aug-19 23:41:48 LOG4 log_alfabeam: ALFABEAM 3 21.055023470972824 22.394324808991001 2010-Aug-19 23:41:48 LOG4 log_alfabeam: ALFABEAM 4 21.048225900580107 22.404593912938722 2010-Aug-19 23:41:48 LOG4 log_alfabeam: ALFABEAM 5 21.044795790608951 22.317687915750771 2010-Aug-19 23:41:48 LOG4 log_alfabeam: ALFABEAM 6 21.048164256238810 22.222403781760665 2010-Aug-19 23:41:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100113 2010-Aug-19 23:41:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:41:49 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Aug-19 23:41:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:41:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-19 23:41:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:41:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:41:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:41:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-19 23:41:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13310.00 2010-Aug-19 23:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:41:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:42:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:42:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:42:00 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Aug-19 23:42:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:42:00 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Aug-19 23:42:00 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-Aug-19 23:42:00 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-19 23:42:00 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-19 23:42:00 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:42:00 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63515 J 2010-Aug-19 23:42:00 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:42:00 LOG2 antvel: Parameters to Doppler: Topocentric 99720 2010 231 0.0 2010-Aug-19 23:42:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:42:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-19 23:42:00 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-19 23:42:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:42:00 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:42:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-19 23:42:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:42:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-Aug-19 23:42:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:42:00 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Aug-19 23:42:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-19 23:42:00 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.141389 2010.6351471594796 18.999933 2010-Aug-19 23:42:00 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000019 22.308611111111119 2010-Aug-19 23:42:00 LOG4 log_alfabeam: ALFABEAM 1 21.054786561833303 22.212805075221350 2010-Aug-19 23:42:00 LOG4 log_alfabeam: ALFABEAM 2 21.058146540090011 22.298374066230373 2010-Aug-19 23:42:00 LOG4 log_alfabeam: ALFABEAM 3 21.054954698689606 22.394860536932715 2010-Aug-19 23:42:00 LOG4 log_alfabeam: ALFABEAM 4 21.048149731404582 22.404086571060081 2010-Aug-19 23:42:00 LOG4 log_alfabeam: ALFABEAM 5 21.044789092159235 22.316662813631449 2010-Aug-19 23:42:00 LOG4 log_alfabeam: ALFABEAM 6 21.048232771617485 22.221898244004773 2010-Aug-19 23:42:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100114 2010-Aug-19 23:42:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:42:01 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Aug-19 23:42:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:42:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-19 23:42:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:42:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:42:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:42:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-19 23:42:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13322.00 2010-Aug-19 23:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:42:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:42:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:42:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:42:12 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Aug-19 23:42:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:42:12 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Aug-19 23:42:12 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-Aug-19 23:42:12 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-19 23:42:12 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-19 23:42:12 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:42:12 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63515 J 2010-Aug-19 23:42:12 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:42:12 LOG2 antvel: Parameters to Doppler: Topocentric 99732 2010 231 0.0 2010-Aug-19 23:42:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:42:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-19 23:42:12 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-19 23:42:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:42:12 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:42:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-19 23:42:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:42:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-Aug-19 23:42:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:42:12 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Aug-19 23:42:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-19 23:42:12 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.144731 2010.6351475397369 18.999933 2010-Aug-19 23:42:12 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000011 22.308611111111112 2010-Aug-19 23:42:12 LOG4 log_alfabeam: ALFABEAM 1 21.054862193916556 22.213311991553354 2010-Aug-19 23:42:12 LOG4 log_alfabeam: ALFABEAM 2 21.058154363002735 22.299390506105691 2010-Aug-19 23:42:12 LOG4 log_alfabeam: ALFABEAM 3 21.054885939228537 22.395382321500925 2010-Aug-19 23:42:12 LOG4 log_alfabeam: ALFABEAM 4 21.048074461627820 22.403570997345554 2010-Aug-19 23:42:12 LOG4 log_alfabeam: ALFABEAM 5 21.044783246537367 22.315643503622173 2010-Aug-19 23:42:12 LOG4 log_alfabeam: ALFABEAM 6 21.048301227877499 22.221406377420980 2010-Aug-19 23:42:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100115 2010-Aug-19 23:42:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:42:13 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Aug-19 23:42:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:42:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-19 23:42:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:42:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:42:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:42:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-19 23:42:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13334.00 2010-Aug-19 23:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:42:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:42:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:42:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:42:24 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Aug-19 23:42:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:42:24 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Aug-19 23:42:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Aug-19 23:42:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-19 23:42:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-19 23:42:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-19 23:42:24 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Aug-19 23:42:24 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-19 23:42:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-19 23:42:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-19 23:42:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-19 23:42:24 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Aug-19 23:42:24 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-Aug-19 23:42:24 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-19 23:42:24 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-19 23:42:24 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:42:24 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63515 J 2010-Aug-19 23:42:24 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:42:24 LOG2 antvel: Parameters to Doppler: Topocentric 99744 2010 231 0.0 2010-Aug-19 23:42:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:42:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-19 23:42:24 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-19 23:42:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:42:24 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:42:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-19 23:42:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:42:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-Aug-19 23:42:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:42:24 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-Aug-19 23:42:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-Aug-19 23:42:24 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.148073 2010.6351479199939 18.999933 2010-Aug-19 23:42:24 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000033 22.308611111111126 2010-Aug-19 23:42:24 LOG4 log_alfabeam: ALFABEAM 1 21.054936947472868 22.213827100587324 2010-Aug-19 23:42:24 LOG4 log_alfabeam: ALFABEAM 2 21.058161340510001 22.300401743823251 2010-Aug-19 23:42:24 LOG4 log_alfabeam: ALFABEAM 3 21.054817200099652 22.395890364986812 2010-Aug-19 23:42:24 LOG4 log_alfabeam: ALFABEAM 4 21.048000082456657 22.403047408087389 2010-Aug-19 23:42:24 LOG4 log_alfabeam: ALFABEAM 5 21.044778237780879 22.314629989739206 2010-Aug-19 23:42:24 LOG4 log_alfabeam: ALFABEAM 6 21.048369618543397 22.220927971108246 2010-Aug-19 23:42:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100116 2010-Aug-19 23:42:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:42:25 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-Aug-19 23:42:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:42:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-19 23:42:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:42:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:42:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:42:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-19 23:42:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13346.00 2010-Aug-19 23:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:42:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:42:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:42:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:42:36 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-Aug-19 23:42:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:42:36 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-Aug-19 23:42:36 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-Aug-19 23:42:36 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-19 23:42:36 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-19 23:42:36 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:42:36 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63515 J 2010-Aug-19 23:42:36 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:42:36 LOG2 antvel: Parameters to Doppler: Topocentric 99756 2010 231 0.0 2010-Aug-19 23:42:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:42:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-19 23:42:36 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-19 23:42:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:42:36 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:42:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-19 23:42:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:42:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-Aug-19 23:42:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:42:36 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Aug-19 23:42:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-Aug-19 23:42:36 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.151416 2010.6351483002509 18.999933 2010-Aug-19 23:42:36 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000015 22.308611111111119 2010-Aug-19 23:42:36 LOG4 log_alfabeam: ALFABEAM 1 21.055010831055970 22.214350195195912 2010-Aug-19 23:42:36 LOG4 log_alfabeam: ALFABEAM 2 21.058167487435071 22.301407770695846 2010-Aug-19 23:42:36 LOG4 log_alfabeam: ALFABEAM 3 21.054748488251018 22.396384866964734 2010-Aug-19 23:42:36 LOG4 log_alfabeam: ALFABEAM 4 21.047926584938743 22.402516010878923 2010-Aug-19 23:42:36 LOG4 log_alfabeam: ALFABEAM 5 21.044774050337320 22.313622270387199 2010-Aug-19 23:42:36 LOG4 log_alfabeam: ALFABEAM 6 21.048437937687098 22.220462817419346 2010-Aug-19 23:42:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100117 2010-Aug-19 23:42:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:42:37 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Aug-19 23:42:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:42:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-19 23:42:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:42:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:42:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:42:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-19 23:42:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13358.00 2010-Aug-19 23:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:42:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:42:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:42:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:42:48 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Aug-19 23:42:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:42:48 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Aug-19 23:42:48 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-Aug-19 23:42:48 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-19 23:42:48 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-19 23:42:48 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:42:48 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63515 J 2010-Aug-19 23:42:48 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:42:48 LOG2 antvel: Parameters to Doppler: Topocentric 99768 2010 231 0.0 2010-Aug-19 23:42:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:42:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-19 23:42:48 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-19 23:42:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:42:48 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:42:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-19 23:42:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:42:48 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-Aug-19 23:42:48 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:42:48 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Aug-19 23:42:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-Aug-19 23:42:48 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.154758 2010.6351486805079 18.999933 2010-Aug-19 23:42:48 LOG4 log_alfabeam: ALFABEAM 0 21.051499999999997 22.308611111111109 2010-Aug-19 23:42:48 LOG4 log_alfabeam: ALFABEAM 1 21.055083788257058 22.214880597113265 2010-Aug-19 23:42:48 LOG4 log_alfabeam: ALFABEAM 2 21.058172813805612 22.302407688143639 2010-Aug-19 23:42:48 LOG4 log_alfabeam: ALFABEAM 3 21.054679871667055 22.396865598503982 2010-Aug-19 23:42:48 LOG4 log_alfabeam: ALFABEAM 4 21.047854024732697 22.401977491531117 2010-Aug-19 23:42:48 LOG4 log_alfabeam: ALFABEAM 5 21.044770671742192 22.312621234682716 2010-Aug-19 23:42:48 LOG4 log_alfabeam: ALFABEAM 6 21.048506118739141 22.220011111804240 2010-Aug-19 23:42:48 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100118 2010-Aug-19 23:42:49 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:42:49 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-Aug-19 23:42:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:42:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-19 23:42:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:42:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:42:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:42:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-19 23:42:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13370.00 2010-Aug-19 23:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:42:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:43:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:43:00 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:43:00 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-Aug-19 23:43:00 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:43:00 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Aug-19 23:43:00 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-Aug-19 23:43:00 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-19 23:43:00 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-19 23:43:00 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:43:00 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63515 J 2010-Aug-19 23:43:00 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:43:00 LOG2 antvel: Parameters to Doppler: Topocentric 99780 2010 231 0.0 2010-Aug-19 23:43:00 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:43:00 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-19 23:43:00 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-19 23:43:00 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:43:00 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:43:00 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-19 23:43:00 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:43:00 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-Aug-19 23:43:00 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:43:00 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Aug-19 23:43:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-Aug-19 23:43:00 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.158101 2010.6351490607651 18.999933 2010-Aug-19 23:43:00 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000008 22.308611111111119 2010-Aug-19 23:43:00 LOG4 log_alfabeam: ALFABEAM 1 21.055155851720428 22.215418258534196 2010-Aug-19 23:43:00 LOG4 log_alfabeam: ALFABEAM 2 21.058177337068614 22.303401810076938 2010-Aug-19 23:43:00 LOG4 log_alfabeam: ALFABEAM 3 21.054611335515546 22.397332926901210 2010-Aug-19 23:43:00 LOG4 log_alfabeam: ALFABEAM 4 21.047782368909935 22.401431895229305 2010-Aug-19 23:43:00 LOG4 log_alfabeam: ALFABEAM 5 21.044768084499797 22.311626557000974 2010-Aug-19 23:43:00 LOG4 log_alfabeam: ALFABEAM 6 21.048574177483147 22.219572489304227 2010-Aug-19 23:43:00 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100119 2010-Aug-19 23:43:01 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:43:01 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-Aug-19 23:43:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:43:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-19 23:43:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:43:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:43:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:43:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-19 23:43:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13382.00 2010-Aug-19 23:43:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:43:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:43:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:43:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:43:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:43:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:43:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:43:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:43:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:43:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:43:12 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:43:12 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-Aug-19 23:43:12 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:43:12 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Aug-19 23:43:12 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-Aug-19 23:43:12 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-19 23:43:12 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-19 23:43:12 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:43:12 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63515 J 2010-Aug-19 23:43:12 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:43:12 LOG2 antvel: Parameters to Doppler: Topocentric 99792 2010 231 0.0 2010-Aug-19 23:43:12 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:43:12 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-19 23:43:12 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-19 23:43:12 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:43:12 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:43:12 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-19 23:43:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:43:12 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-Aug-19 23:43:12 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:43:12 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Aug-19 23:43:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-Aug-19 23:43:12 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.161443 2010.6351494410221 18.999933 2010-Aug-19 23:43:12 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000019 22.308611111111119 2010-Aug-19 23:43:12 LOG4 log_alfabeam: ALFABEAM 1 21.055226968498808 22.215962493663817 2010-Aug-19 23:43:12 LOG4 log_alfabeam: ALFABEAM 2 21.058181069275385 22.304389269873472 2010-Aug-19 23:43:12 LOG4 log_alfabeam: ALFABEAM 3 21.054542946333505 22.397786664245039 2010-Aug-19 23:43:12 LOG4 log_alfabeam: ALFABEAM 4 21.047711669651164 22.400879914418596 2010-Aug-19 23:43:12 LOG4 log_alfabeam: ALFABEAM 5 21.044766274238725 22.310639092737471 2010-Aug-19 23:43:12 LOG4 log_alfabeam: ALFABEAM 6 21.048642048906665 22.219147106533093 2010-Aug-19 23:43:12 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100120 2010-Aug-19 23:43:13 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:43:13 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-Aug-19 23:43:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:43:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-19 23:43:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:43:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:43:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:43:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-19 23:43:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13394.00 2010-Aug-19 23:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:43:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:43:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:43:24 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:43:24 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-Aug-19 23:43:24 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:43:24 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Aug-19 23:43:24 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-Aug-19 23:43:24 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-19 23:43:24 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-19 23:43:24 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:43:24 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63515 J 2010-Aug-19 23:43:24 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:43:24 LOG2 antvel: Parameters to Doppler: Topocentric 99804 2010 231 0.0 2010-Aug-19 23:43:24 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:43:24 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-19 23:43:24 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-19 23:43:24 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:43:24 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:43:24 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-19 23:43:24 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:43:24 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-Aug-19 23:43:24 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:43:24 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Aug-19 23:43:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-Aug-19 23:43:24 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.164786 2010.6351498212791 18.999933 2010-Aug-19 23:43:24 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000015 22.308611111111119 2010-Aug-19 23:43:24 LOG4 log_alfabeam: ALFABEAM 1 21.055297172472049 22.216513265539145 2010-Aug-19 23:43:24 LOG4 log_alfabeam: ALFABEAM 2 21.058184027881456 22.305370399108941 2010-Aug-19 23:43:24 LOG4 log_alfabeam: ALFABEAM 3 21.054474688024683 22.398227185313594 2010-Aug-19 23:43:24 LOG4 log_alfabeam: ALFABEAM 4 21.047641892804108 22.400321583003194 2010-Aug-19 23:43:24 LOG4 log_alfabeam: ALFABEAM 5 21.044765223544374 22.309658498277877 2010-Aug-19 23:43:24 LOG4 log_alfabeam: ALFABEAM 6 21.048709750059068 22.218734592457476 2010-Aug-19 23:43:24 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100121 2010-Aug-19 23:43:25 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:43:25 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Aug-19 23:43:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:43:25 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-19 23:43:25 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:43:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:43:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:43:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-19 23:43:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13406.00 2010-Aug-19 23:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:43:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:43:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:43:36 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:43:36 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Aug-19 23:43:36 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:43:36 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Aug-19 23:43:36 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-Aug-19 23:43:36 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-19 23:43:36 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-19 23:43:36 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:43:36 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63515 J 2010-Aug-19 23:43:36 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:43:36 LOG2 antvel: Parameters to Doppler: Topocentric 99816 2010 231 0.0 2010-Aug-19 23:43:36 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:43:36 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-19 23:43:36 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-19 23:43:36 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:43:36 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:43:36 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-19 23:43:36 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:43:36 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-Aug-19 23:43:36 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-19 23:43:36 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Aug-19 23:43:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-Aug-19 23:43:36 LOG5 log_alfabeam: Parameters: 21.051500000000001 22.308611111111112 21.168128 2010.6351502015361 18.999933 2010-Aug-19 23:43:36 LOG4 log_alfabeam: ALFABEAM 0 21.051500000000015 22.308611111111119 2010-Aug-19 23:43:36 LOG4 log_alfabeam: ALFABEAM 1 21.055366414099225 22.217069884401010 2010-Aug-19 23:43:36 LOG4 log_alfabeam: ALFABEAM 2 21.058186226746791 22.306344364236427 2010-Aug-19 23:43:36 LOG4 log_alfabeam: ALFABEAM 3 21.054406625509394 22.398654340698172 2010-Aug-19 23:43:36 LOG4 log_alfabeam: ALFABEAM 4 21.047573087133728 22.399757596521773 2010-Aug-19 23:43:36 LOG4 log_alfabeam: ALFABEAM 5 21.044764916360275 22.308685594392021 2010-Aug-19 23:43:36 LOG4 log_alfabeam: ALFABEAM 6 21.048777217635511 22.218335067415921 2010-Aug-19 23:43:36 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 23100122 2010-Aug-19 23:43:37 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-19 23:43:37 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-Aug-19 23:43:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:43:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-19 23:43:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:43:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:43:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:43:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-19 23:43:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13418.00 2010-Aug-19 23:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:43:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:43:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:43:48 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-19 23:43:48 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-Aug-19 23:43:48 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-19 23:43:48 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Aug-19 23:43:48 INFO2 smartfreq: Switching off CAL 2010-Aug-19 23:43:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-19 23:43:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-19 23:43:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-19 23:43:48 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Aug-19 23:43:48 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-19 23:43:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-19 23:43:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-19 23:43:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-19 23:43:48 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Aug-19 23:43:48 INFO3 restore_frequencies: Restoring original frequencies 2010-Aug-19 23:43:48 LOG5 antvel: Calling 'antvel 210305.400000 221831.000000 J Topocentric 0' 2010-Aug-19 23:43:48 LOG2 antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63515 J 2010-Aug-19 23:43:48 LOG2 antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:43:48 LOG2 antvel: Parameters to Doppler: Topocentric 99828 2010 231 0.0 2010-Aug-19 23:43:48 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:43:48 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-Aug-19 23:43:48 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-Aug-19 23:43:48 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:43:48 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:43:48 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-19 23:43:48 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:43:48 STOP finish_task: Finishing task 'smart frequency switching' 2010-Aug-19 23:43:48 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-19 23:43:48 DONE finish_task: DONE finished pattern: smart frequency switching 2010-Aug-19 23:43:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-19 23:43:49 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2010-Aug-19 23:43:49 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-19 23:43:49 NOTE run_command_file: DONE with command file processing 2010-Aug-19 23:43:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Aug-19 23:43:49 STOP finish_task: Finishing task 'running command file 'command_galfasrc_aug10.cmd'' 2010-Aug-19 23:43:49 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-19 23:43:49 DONE finish_task: DONE finished running: command file 'command_galfasrc_aug10.cmd' 2010-Aug-19 23:43:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-19 23:43:49 END end_task: Finishing task 'running command file 'command_galfasrc_aug10.cmd'' with status 'OK' 2010-Aug-19 23:43:49 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-19 23:43:49 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-19 23:43:49 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:43:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:43:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:44:00 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Aug-19 23:44:00 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Aug-19 23:44:00 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Aug-19 23:44:00 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Aug-19 23:44:00 LOG5 begin_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2010-Aug-19 23:44:00 NOTE restart_wapp: Restarting all WAPPs 2010-Aug-19 23:44:00 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Aug-19 23:44:00 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Aug-19 23:44:00 LOG5 end_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2010-Aug-19 23:44:00 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-19 23:44:00 LOG3 exec_msg: Closing socket 2010-Aug-19 23:44:00 LOG3 exec_msg: Closing socket 2010-Aug-19 23:44:00 LOG3 exec_msg: Closing socket 2010-Aug-19 23:44:00 LOG3 exec_msg: Closing socket 2010-Aug-19 23:44:03 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Aug-19 23:44:03 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Aug-19 23:44:03 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Aug-19 23:44:03 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Aug-19 23:44:15 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2010.conf' 2010-Aug-19 23:44:16 LOG2 CIMA-antvel: Precessing RA = 21:03:05.4 Dec = +22:18:31.0 Epoch = 2010.63515 J 2010-Aug-19 23:44:16 LOG2 CIMA-antvel: Computed apparent RA = 21:03:36.3 Dec = +22:21:15.5 2010-Aug-19 23:44:16 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 99855 2010 231 0.0 2010-Aug-19 23:44:16 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Aug-19 23:44:16 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-19 23:44:17 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2010-Aug-19 23:44:17 LOG4 exec_msg: From OBSERVER: config_iflo 2010-Aug-19 23:44:17 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Aug-19 23:44:17 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2010-Aug-19 23:44:17 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Aug-19 23:44:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Aug-19 23:44:17 LOG1 config_iflo: Receiver ALFA already selected 2010-Aug-19 23:44:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-19 23:44:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-19 23:44:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-19 23:44:17 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Aug-19 23:44:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-19 23:44:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-19 23:44:17 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Aug-19 23:44:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-19 23:44:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-19 23:44:17 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Aug-19 23:44:17 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Aug-19 23:44:17 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Aug-19 23:44:17 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Aug-19 23:44:17 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Aug-19 23:44:17 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Aug-19 23:44:17 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Aug-19 23:44:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-19 23:44:18 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Aug-19 23:44:18 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Aug-19 23:44:18 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Aug-19 23:44:18 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Aug-19 23:44:18 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Aug-19 23:44:18 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Aug-19 23:44:18 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Aug-19 23:44:18 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Aug-19 23:44:18 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Aug-19 23:44:18 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Aug-19 23:44:18 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Aug-19 23:44:18 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Aug-19 23:44:18 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Aug-19 23:44:18 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Aug-19 23:44:18 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Aug-19 23:44:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:44:18 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Aug-19 23:44:18 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Aug-19 23:44:18 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Aug-19 23:44:18 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Aug-19 23:44:18 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Aug-19 23:44:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Aug-19 23:44:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:44:18 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Aug-19 23:44:18 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-Aug-19 23:44:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-19 23:44:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Aug-19 23:44:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:44:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:44:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:44:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:44:18 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-Aug-19 23:44:18 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Aug-19 23:44:18 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-Aug-19 23:44:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Aug-19 23:44:18 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Aug-19 23:44:18 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2010-Aug-19 23:44:18 DONE finish_task: DONE finished configuration: IF/LO path 2010-Aug-19 23:44:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-19 23:44:18 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Aug-19 23:44:18 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2010-Aug-19 23:44:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Aug-19 23:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Aug-19 23:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Aug-19 23:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Aug-19 23:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Aug-19 23:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Aug-19 23:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Aug-19 23:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Aug-19 23:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-19 23:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-19 23:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-19 23:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-19 23:44:18 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Aug-19 23:44:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Aug-19 23:44:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Aug-19 23:44:19 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2010-Aug-19 23:44:19 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2010-Aug-19 23:44:19 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Aug-19 23:44:19 LOG5 begin_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Aug-19 23:44:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Aug-19 23:44:19 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Aug-19 23:44:19 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Aug-19 23:44:19 START begin_task: Starting task 'selecting calibration port' 2010-Aug-19 23:44:19 LOG5 begin_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2010-Aug-19 23:44:19 LOG3 vw_send: To DATATAKING: calport 3 2010-Aug-19 23:44:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Aug-19 23:44:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:44:19 START begin_task: Starting task 'waiting on calport' 2010-Aug-19 23:44:19 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Aug-19 23:44:19 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2010-Aug-19 23:44:19 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Aug-19 23:44:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:44:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:44:19 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-19 23:44:19 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Aug-19 23:44:19 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Aug-19 23:44:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Aug-19 23:44:19 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Aug-19 23:44:19 LOG5 end_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2010-Aug-19 23:44:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-19 23:44:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-19 23:44:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-19 23:44:19 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2010-Aug-19 23:44:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:44:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-19 23:44:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-19 23:44:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-19 23:44:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-19 23:44:19 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2010-Aug-19 23:44:19 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Aug-19 23:44:19 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Aug-19 23:44:19 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Aug-19 23:44:19 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Aug-19 23:44:19 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Aug-19 23:44:19 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Aug-19 23:44:19 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Aug-19 23:44:19 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Aug-19 23:44:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-19 23:44:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-19 23:44:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-19 23:44:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-19 23:44:19 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Aug-19 23:44:19 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Aug-19 23:44:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-19 23:44:19 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2010-Aug-19 23:44:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Aug-19 23:44:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Aug-19 23:44:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-19 23:44:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-19 23:44:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-19 23:44:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-19 23:44:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-19 23:44:19 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2010-Aug-19 23:44:19 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Aug-19 23:44:19 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Aug-19 23:44:19 LOG5 finish_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Aug-19 23:44:19 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Aug-19 23:44:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-19 23:44:20 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Aug-19 23:44:20 LOG5 end_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Aug-19 23:44:20 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-19 23:44:20 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2010-Aug-19 23:44:20 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2010-Aug-19 23:44:20 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-19 23:44:20 LOG5 begin_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Aug-19 23:44:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-19 23:44:20 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-19 23:44:20 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Aug-19 23:44:20 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-19 23:44:20 LOG5 finish_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Aug-19 23:44:20 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-19 23:44:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-19 23:44:20 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-19 23:44:20 LOG5 end_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Aug-19 23:44:20 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2010.conf' applied. 2010-Aug-19 23:44:21 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-19 23:44:21 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-19 23:44:40 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Aug-19 23:44:40 LOG4 exec_msg: From OBSERVER: track_new_source drift93p1 211300.0 +223030 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2010-Aug-19 23:44:40 LOG1 track_new_source: Calling 'track_new_source drift93p1 211300.0 +223030 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2010-Aug-19 23:44:40 BEGIN begin_task: Starting task 'selecting new source' 2010-Aug-19 23:44:40 LOG5 begin_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2010-Aug-19 23:44:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift93p1} INFO {Selecting source 'drift93p1' ...} 2010-Aug-19 23:44:40 LOG3 track_source: Calling 'track_source drift93p1 211300.0 +223030 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2010-Aug-19 23:44:40 START begin_task: Starting task 'sending tracking commands' 2010-Aug-19 23:44:40 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Aug-19 23:44:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift93p1} INFO {Slewing to source 'drift93p1' ...} 2010-Aug-19 23:44:40 INFO1 track_source: Starting to track drift93p1 2010-Aug-19 23:44:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift93p1" 2010-Aug-19 23:44:40 LOG3 vw_send: To DATATAKING: set ra 211300.0 2010-Aug-19 23:44:40 LOG3 vw_send: To DATATAKING: set dec +223030 2010-Aug-19 23:44:40 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-19 23:44:40 LOG3 vw_send: To DATATAKING: pnt tr 211300.0 +223030 -CJ 2010-Aug-19 23:44:40 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-19 23:44:40 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-19 23:44:40 LOG5 finish_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Aug-19 23:44:40 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-19 23:44:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-19 23:44:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-19 23:44:40 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Aug-19 23:44:40 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2010-Aug-19 23:44:40 START begin_task: Starting task 'applying pointing corrections' 2010-Aug-19 23:44:40 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Aug-19 23:44:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Aug-19 23:44:40 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Aug-19 23:44:40 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Aug-19 23:44:40 LOG5 finish_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Aug-19 23:44:40 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Aug-19 23:44:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-19 23:44:40 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Aug-19 23:44:40 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Aug-19 23:44:40 STOP finish_task: Finishing task 'selecting new source' 2010-Aug-19 23:44:40 LOG5 finish_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2010-Aug-19 23:44:40 DONE finish_task: DONE finished selecting: new source 2010-Aug-19 23:44:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-19 23:44:40 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Aug-19 23:44:40 LOG5 end_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2010-Aug-19 23:44:40 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift93p1" 2010-Aug-19 23:44:40 LOG4 got_cormsg: From DATATAKING: set ra 211300.0 2010-Aug-19 23:44:40 LOG4 got_cormsg: From DATATAKING: set dec +223030 2010-Aug-19 23:44:40 LOG4 got_cormsg: From DATATAKING: vw% 211300.0 2010-Aug-19 23:44:40 LOG4 got_cormsg: From DATATAKING: vw% +223030 2010-Aug-19 23:44:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:44:40 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-19 23:44:40 LOG4 got_cormsg: From DATATAKING: pnt tr 211300.0 +223030 -CJ 2010-Aug-19 23:44:40 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-19 23:44:40 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-19 23:44:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:44:40 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Aug-19 23:44:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:45:46 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2010-Aug-19 23:45:46 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2010-Aug-19 23:45:46 BEGIN begin_task: Starting task 'adjusting WAPP power' 2010-Aug-19 23:45:46 LOG5 begin_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2010-Aug-19 23:45:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Aug-19 23:45:47 INFO2 adjust_power: Starting to adjust WAPP power 2010-Aug-19 23:45:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Aug-19 23:45:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Aug-19 23:45:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:45:47 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Aug-19 23:45:47 LOG5 begin_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Aug-19 23:45:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Aug-19 23:45:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:45:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:45:49 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-19 23:45:49 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Aug-19 23:45:49 LOG5 end_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Aug-19 23:45:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Aug-19 23:45:49 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-19 23:45:49 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-Aug-19 23:45:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Aug-19 23:45:49 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-19 23:45:49 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-19 23:45:49 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-19 23:45:49 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-19 23:45:49 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Aug-19 23:45:49 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2010-Aug-19 23:45:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Aug-19 23:45:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:45:50 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Aug-19 23:45:50 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 5 dB 2010-Aug-19 23:45:50 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 3 3 dB 2010-Aug-19 23:45:50 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Aug-19 23:45:50 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Aug-19 23:45:50 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Aug-19 23:45:50 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2010-Aug-19 23:45:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.889 0.948 ALFA beam 1: 0.948 1.003 2010-Aug-19 23:45:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.965 0.905 ALFA beam 3: 1.063 0.968 2010-Aug-19 23:45:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.094 0.874 ALFA beam 5: 1.100 1.092 2010-Aug-19 23:45:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.895 0.845 ALFA beam 7: 0.985 0.999 2010-Aug-19 23:45:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-19 23:45:50 LOG5 finish_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-Aug-19 23:45:50 INFO2 finish_task: DONE finished adjusting: WAPP power 2010-Aug-19 23:45:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-19 23:45:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-19 23:45:50 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-Aug-19 23:45:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2010-Aug-19 23:45:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-19 23:45:50 LOG5 finish_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2010-Aug-19 23:45:50 DONE finish_task: DONE finished adjusting: WAPP power levels 2010-Aug-19 23:45:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-19 23:45:50 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-19 23:45:50 LOG5 end_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2010-Aug-19 23:45:56 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2010-Aug-19 23:45:56 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift93p1 211300.0 +223030 J 0 Topocentric velocity(optical) 2010-Aug-19 23:45:56 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift93p1 211300.0 +223030 J 0 Topocentric velocity(optical)' 2010-Aug-19 23:45:56 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Aug-19 23:45:56 LOG5 begin_task: Level: (1) ID = <10116> Status = 0 0 0 0 ok 2010-Aug-19 23:45:56 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift93p1' 2010-Aug-19 23:45:56 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Aug-19 23:45:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift93p1} 2010-Aug-19 23:45:56 INFO5 fixed_driftmap: Start: year = 2010.6351546378685 RA = 21:13:31.1 Dec = +22:33:20.8 2010-Aug-19 23:45:56 NOTE fixed_driftmap: Setting ZA to 4:12:07.1 ... 2010-Aug-19 23:45:56 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 4.20 2010-Aug-19 23:45:57 LOG3 track_source: Calling 'track_source drift93p1 180.0 4.2019644717 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-Aug-19 23:45:57 START begin_task: Starting task 'sending tracking commands' 2010-Aug-19 23:45:57 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-Aug-19 23:45:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift93p1} INFO {Slewing to source 'drift93p1' ...} 2010-Aug-19 23:45:57 INFO1 track_source: Starting to track drift93p1 2010-Aug-19 23:45:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift93p1" 2010-Aug-19 23:45:57 LOG3 vw_send: To DATATAKING: set ra 180.0 2010-Aug-19 23:45:57 LOG3 vw_send: To DATATAKING: set dec 4.2019644717 2010-Aug-19 23:45:57 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-19 23:45:57 LOG3 vw_send: To DATATAKING: pnt tr 180.0 4.2019644717 -CF 2010-Aug-19 23:45:57 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-19 23:45:57 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-19 23:45:57 LOG5 finish_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-Aug-19 23:45:57 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-19 23:45:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-19 23:45:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-19 23:45:57 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-Aug-19 23:45:57 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-19 23:45:57 LOG5 begin_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2010-Aug-19 23:45:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-19 23:45:57 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-19 23:45:57 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2010-Aug-19 23:45:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Aug-19 23:45:57 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Aug-19 23:45:57 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-Aug-19 23:45:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift93p1" 2010-Aug-19 23:45:57 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2010-Aug-19 23:45:57 LOG4 got_cormsg: From DATATAKING: set dec 4.2019644717 2010-Aug-19 23:45:57 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2010-Aug-19 23:45:57 LOG4 got_cormsg: From DATATAKING: vw% 4.2019644717 2010-Aug-19 23:45:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:45:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-19 23:45:57 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 4.2019644717 -CF 2010-Aug-19 23:45:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-19 23:45:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-19 23:45:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:45:58 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-19 23:45:58 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-19 23:45:58 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Aug-19 23:45:58 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-Aug-19 23:45:58 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-19 23:45:58 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-19 23:45:58 LOG5 finish_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2010-Aug-19 23:45:58 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-19 23:45:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-19 23:45:58 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-19 23:45:58 LOG5 end_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2010-Aug-19 23:45:58 START begin_task: Starting task 'waiting on telescope' 2010-Aug-19 23:45:58 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Aug-19 23:45:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-19 23:45:58 LOG3 waittrk: Start waittrk 5 2010-Aug-19 23:45:58 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-19 23:45:58 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-Aug-19 23:46:03 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-19 23:46:03 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-Aug-19 23:46:03 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-19 23:46:03 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-Aug-19 23:46:17 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-19 23:46:17 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2010-Aug-19 23:46:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-19 23:46:17 INFO2 waittrk: Now tracking drift93p1 2010-Aug-19 23:46:17 LOG4 waittrk: Current telescope position: Az = 179.73 ZA = 4.22 2010-Aug-19 23:46:17 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-19 23:46:17 LOG5 finish_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Aug-19 23:46:17 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-19 23:46:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-19 23:46:17 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-19 23:46:17 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Aug-19 23:46:17 START begin_task: Starting task 'selecting calibration type' 2010-Aug-19 23:46:17 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Aug-19 23:46:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-19 23:46:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-19 23:46:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:46:17 START begin_task: Starting task 'waiting on setcal' 2010-Aug-19 23:46:17 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2010-Aug-19 23:46:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-19 23:46:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:46:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:46:17 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-19 23:46:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-19 23:46:17 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2010-Aug-19 23:46:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-19 23:46:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-19 23:46:18 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-19 23:46:18 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-19 23:46:18 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Aug-19 23:46:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:46:18 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-19 23:46:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-19 23:46:18 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Aug-19 23:46:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-19 23:46:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-19 23:46:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-19 23:46:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-19 23:46:18 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-19 23:46:18 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2010-Aug-19 23:46:18 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-19 23:46:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-19 23:46:18 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2010-Aug-19 23:46:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-19 23:46:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-19 23:46:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-19 23:46:18 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Aug-19 23:46:18 LOG5 dopset_later: Calling 'dopset_later 44.263665554744541' 2010-Aug-19 23:46:18 INFO3 dopset_later: Setting Doppler correction for 23:47:01 (44.3 seconds from now) 2010-Aug-19 23:46:18 LOG5 antvel: Calling 'antvel 180.000000 4.201964 F Topocentric 44.263665554744541' 2010-Aug-19 23:46:18 LOG2 antvel: Transforming current Az = 180.00 ZA = 4.20 to apparent RA = 21:13:31.0 Dec = +22:33:20.8 2010-Aug-19 23:46:18 LOG2 antvel: Parameters to Doppler: Topocentric 100021 2010 231 0.0 2010-Aug-19 23:46:18 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-19 23:46:18 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-Aug-19 23:46:18 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-Aug-19 23:46:18 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-19 23:46:18 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-19 23:46:18 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-19 23:46:18 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:46:18 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-19 23:46:18 LOG5 begin_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2010-Aug-19 23:46:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Aug-19 23:46:18 INFO2 adjust_power: Starting to adjust WAPP power 2010-Aug-19 23:46:18 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Aug-19 23:46:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Aug-19 23:46:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:46:18 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Aug-19 23:46:18 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Aug-19 23:46:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-19 23:46:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-19 23:46:18 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Aug-19 23:46:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:46:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:46:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:46:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:46:21 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-19 23:46:21 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Aug-19 23:46:21 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Aug-19 23:46:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Aug-19 23:46:21 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-19 23:46:21 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Aug-19 23:46:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Aug-19 23:46:21 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-19 23:46:21 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-19 23:46:21 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-19 23:46:21 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-19 23:46:21 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Aug-19 23:46:21 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2010-Aug-19 23:46:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:46:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Aug-19 23:46:21 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Aug-19 23:46:21 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 5 dB 2010-Aug-19 23:46:21 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 3 3 dB 2010-Aug-19 23:46:21 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Aug-19 23:46:21 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Aug-19 23:46:22 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Aug-19 23:46:22 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2010-Aug-19 23:46:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.901 0.950 ALFA beam 1: 0.945 1.002 2010-Aug-19 23:46:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.976 0.905 ALFA beam 3: 1.078 0.985 2010-Aug-19 23:46:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.109 0.894 ALFA beam 5: 1.091 1.089 2010-Aug-19 23:46:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.913 0.862 ALFA beam 7: 0.996 1.017 2010-Aug-19 23:46:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-19 23:46:22 LOG5 finish_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Aug-19 23:46:22 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Aug-19 23:46:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-19 23:46:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-19 23:46:22 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Aug-19 23:46:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-19 23:46:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-19 23:46:22 LOG5 finish_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2010-Aug-19 23:46:22 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Aug-19 23:46:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-19 23:46:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-19 23:46:22 LOG5 end_task: Level: (2) ID = <10127> Status = 0 0 0 0 ok 2010-Aug-19 23:46:22 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 21:13:31.1 LST = 21:12:50.7 diff = 40.4 secs 2010-Aug-19 23:46:22 INFO2 fixed_driftmap: Waiting 38.4 seconds for RA 21:13:31 2010-Aug-19 23:46:22 INFO2 lstwait: Waiting for 38.3 secs from LST 21:12:51 to LST 21:13:29 ... 2010-Aug-19 23:46:22 LOG4 send_obs_status: To obs_status: <1> TASKTIME 38.269676350919163 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Aug-19 23:46:22 START begin_task: Starting task 'waiting on wait on LST' 2010-Aug-19 23:46:22 LOG5 begin_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2010-Aug-19 23:47:00 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Aug-19 23:47:00 LOG5 end_task: Level: (2) ID = <10131> Status = 0 0 0 0 ok 2010-Aug-19 23:47:00 LOG4 lstwait: Finished waiting 0.73 seconds late 2010-Aug-19 23:47:00 INFO3 lstwait: Finished waiting 2010-Aug-19 23:47:00 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Aug-19 23:47:00 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-19 23:47:00 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-19 23:47:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-19 23:47:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-19 23:47:00 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2010-Aug-19 23:47:00 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Aug-19 23:47:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-19 23:47:00 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-19 23:47:00 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-19 23:47:00 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2010-Aug-19 23:47:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-19 23:47:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-19 23:47:00 INFO2 take_data: Starting WAPP 600-second scan: 23100123 2010-Aug-19 23:47:01 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-19 23:47:01 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2010-Aug-19 23:47:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-19 23:47:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:47:01 NOTE WAPPDATA-new_file: New FITS file: wapp.20100819.a2010.0001.fits 2010-Aug-19 23:47:01 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100819.a2010.0001.fits} 2010-Aug-19 23:47:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-19 23:47:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13622.00 2010-Aug-19 23:47:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:47:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:47:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:47:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:47:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:47:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:47:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:47:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:47:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:50:22 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 23:50:22.304 (seconds: 85822.304)!} 2010-Aug-19 23:50:22 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 23:50:22.304 (seconds: 85822.304)! 2010-Aug-19 23:50:23 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 85821.0 to 85822.0! 2010-Aug-19 23:50:24 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (85821.0 - 85823.0)! 2010-Aug-19 23:53:36 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 55428.162199 to 55428.162211! 2010-Aug-19 23:53:37 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (55428.162199 - 55428.162222)! 2010-Aug-19 23:57:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:57:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-19 23:57:02 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2010-Aug-19 23:57:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-19 23:57:02 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2010-Aug-19 23:57:02 LOG1 fixed_driftmap: New position: year = 2010.6351757421351 RA = 21:23:03.3 RA/Dec = 21:23:34.6 +22:33:26.8 2010-Aug-19 23:57:02 NOTE fixed_driftmap: Correcting ZA to 4:12:13.1 ... 2010-Aug-19 23:57:02 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2036346239 -CF 2010-Aug-19 23:57:02 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-19 23:57:02 START begin_task: Starting task 'WAPP calibration' 2010-Aug-19 23:57:02 LOG5 begin_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2010-Aug-19 23:57:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-19 23:57:02 START begin_task: Starting task 'selecting calibration type' 2010-Aug-19 23:57:02 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2010-Aug-19 23:57:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-19 23:57:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-19 23:57:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:57:02 START begin_task: Starting task 'waiting on setcal' 2010-Aug-19 23:57:02 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-Aug-19 23:57:02 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2036346239 -CF 2010-Aug-19 23:57:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:57:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-19 23:57:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-19 23:57:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:57:02 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-19 23:57:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-19 23:57:02 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-Aug-19 23:57:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-19 23:57:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-19 23:57:02 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-19 23:57:02 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-19 23:57:02 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2010-Aug-19 23:57:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-19 23:57:03 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-19 23:57:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-19 23:57:03 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2010-Aug-19 23:57:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-19 23:57:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-19 23:57:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-19 23:57:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-19 23:57:03 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-19 23:57:03 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-Aug-19 23:57:03 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-19 23:57:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-19 23:57:03 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-Aug-19 23:57:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-19 23:57:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-19 23:57:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-19 23:57:03 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2010-Aug-19 23:57:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-19 23:57:03 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-19 23:57:03 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-19 23:57:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-19 23:57:03 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2010-Aug-19 23:57:03 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-19 23:57:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-19 23:57:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-19 23:57:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-19 23:57:03 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2010-Aug-19 23:57:03 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-19 23:57:03 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-19 23:57:03 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Aug-19 23:57:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-19 23:57:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-19 23:57:03 INFO2 take_data: Starting WAPP 1-second scan: 23100124 2010-Aug-19 23:57:03 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-19 23:57:03 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-Aug-19 23:57:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:57:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-19 23:57:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14224.00 2010-Aug-19 23:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:57:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-19 23:57:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-19 23:57:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-19 23:57:05 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-Aug-19 23:57:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-19 23:57:05 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Aug-19 23:57:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-19 23:57:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-19 23:57:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-19 23:57:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-19 23:57:05 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2010-Aug-19 23:57:05 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-19 23:57:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-19 23:57:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-19 23:57:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-19 23:57:05 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2010-Aug-19 23:57:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-19 23:57:05 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-19 23:57:05 LOG5 finish_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2010-Aug-19 23:57:05 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-19 23:57:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-19 23:57:05 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-19 23:57:05 LOG5 end_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2010-Aug-19 23:57:05 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2010-Aug-19 23:57:05 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Aug-19 23:57:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-19 23:57:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-19 23:57:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-19 23:57:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-19 23:57:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-19 23:57:06 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-19 23:57:06 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-19 23:57:06 LOG5 begin_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2010-Aug-19 23:57:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-19 23:57:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-19 23:57:06 INFO2 take_data: Starting WAPP 600-second scan: 23100125 2010-Aug-19 23:57:06 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-19 23:57:06 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Aug-19 23:57:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-19 23:57:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-19 23:57:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-19 23:57:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14227.00 2010-Aug-19 23:57:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20100819.a2010.0002.fits 2010-Aug-19 23:57:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100819.a2010.0002.fits} 2010-Aug-19 23:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-19 23:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-19 23:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-19 23:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-19 23:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-19 23:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-19 23:57:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 00:07:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 00:07:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 00:07:07 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Aug-20 00:07:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 00:07:07 LOG5 end_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2010-Aug-20 00:07:07 LOG1 fixed_driftmap: New position: year = 2010.6351949134282 RA = 21:33:09.7 RA/Dec = 21:33:41.2 +22:33:32.5 2010-Aug-20 00:07:07 NOTE fixed_driftmap: Correcting ZA to 4:12:18.8 ... 2010-Aug-20 00:07:07 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2052216741 -CF 2010-Aug-20 00:07:07 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 00:07:07 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 00:07:07 LOG5 begin_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2010-Aug-20 00:07:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 00:07:07 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 00:07:07 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2010-Aug-20 00:07:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 00:07:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 00:07:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 00:07:07 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 00:07:07 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2010-Aug-20 00:07:07 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2052216741 -CF 2010-Aug-20 00:07:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:07:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 00:07:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 00:07:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:07:07 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 00:07:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 00:07:07 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2010-Aug-20 00:07:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 00:07:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 00:07:08 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 00:07:08 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 00:07:08 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2010-Aug-20 00:07:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:07:08 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 00:07:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 00:07:08 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2010-Aug-20 00:07:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 00:07:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 00:07:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 00:07:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 00:07:08 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 00:07:08 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2010-Aug-20 00:07:08 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 00:07:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 00:07:08 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2010-Aug-20 00:07:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 00:07:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 00:07:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 00:07:08 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2010-Aug-20 00:07:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 00:07:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 00:07:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 00:07:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 00:07:08 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2010-Aug-20 00:07:08 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 00:07:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 00:07:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 00:07:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 00:07:08 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2010-Aug-20 00:07:08 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 00:07:08 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 00:07:08 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2010-Aug-20 00:07:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 00:07:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 00:07:08 INFO2 take_data: Starting WAPP 1-second scan: 23200001 2010-Aug-20 00:07:08 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 00:07:08 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-Aug-20 00:07:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 00:07:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 00:07:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14829.00 2010-Aug-20 00:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 00:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 00:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 00:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 00:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:07:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 00:07:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 00:07:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 00:07:10 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-Aug-20 00:07:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 00:07:10 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2010-Aug-20 00:07:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 00:07:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 00:07:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 00:07:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 00:07:10 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2010-Aug-20 00:07:10 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 00:07:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 00:07:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 00:07:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 00:07:10 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2010-Aug-20 00:07:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 00:07:10 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 00:07:10 LOG5 finish_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2010-Aug-20 00:07:10 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 00:07:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 00:07:10 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 00:07:10 LOG5 end_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2010-Aug-20 00:07:10 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2010-Aug-20 00:07:10 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2010-Aug-20 00:07:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 00:07:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 00:07:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 00:07:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 00:07:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 00:07:11 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 00:07:11 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 00:07:11 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2010-Aug-20 00:07:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 00:07:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 00:07:11 INFO2 take_data: Starting WAPP 600-second scan: 23200002 2010-Aug-20 00:07:11 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 00:07:11 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-Aug-20 00:07:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 00:07:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 00:07:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 00:07:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14832.00 2010-Aug-20 00:07:11 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0000.fits 2010-Aug-20 00:07:11 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0000.fits} 2010-Aug-20 00:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 00:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 00:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 00:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 00:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:07:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 00:17:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 00:17:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 00:17:12 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-Aug-20 00:17:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 00:17:12 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2010-Aug-20 00:17:12 LOG1 fixed_driftmap: New position: year = 2010.6352140847214 RA = 21:43:16.2 RA/Dec = 21:43:47.9 +22:33:37.9 2010-Aug-20 00:17:12 NOTE fixed_driftmap: Correcting ZA to 4:12:24.2 ... 2010-Aug-20 00:17:12 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2067135283 -CF 2010-Aug-20 00:17:12 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 00:17:12 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 00:17:12 LOG5 begin_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2010-Aug-20 00:17:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 00:17:12 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 00:17:12 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2010-Aug-20 00:17:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 00:17:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 00:17:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 00:17:12 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 00:17:12 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2010-Aug-20 00:17:12 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2067135283 -CF 2010-Aug-20 00:17:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:17:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 00:17:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 00:17:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:17:12 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 00:17:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 00:17:12 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2010-Aug-20 00:17:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 00:17:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 00:17:12 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 00:17:12 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 00:17:12 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-Aug-20 00:17:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:17:13 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 00:17:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 00:17:13 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-Aug-20 00:17:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 00:17:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 00:17:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 00:17:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 00:17:13 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 00:17:13 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2010-Aug-20 00:17:13 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 00:17:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 00:17:13 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2010-Aug-20 00:17:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 00:17:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 00:17:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 00:17:13 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2010-Aug-20 00:17:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 00:17:13 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 00:17:13 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 00:17:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 00:17:13 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2010-Aug-20 00:17:13 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 00:17:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 00:17:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 00:17:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 00:17:13 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2010-Aug-20 00:17:13 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 00:17:13 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 00:17:13 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Aug-20 00:17:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 00:17:13 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 00:17:13 INFO2 take_data: Starting WAPP 1-second scan: 23200003 2010-Aug-20 00:17:13 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 00:17:13 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-Aug-20 00:17:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 00:17:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 00:17:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15434.00 2010-Aug-20 00:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 00:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 00:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 00:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 00:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:17:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 00:17:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 00:17:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 00:17:15 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-Aug-20 00:17:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 00:17:15 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Aug-20 00:17:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 00:17:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 00:17:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 00:17:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 00:17:15 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-Aug-20 00:17:15 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 00:17:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 00:17:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 00:17:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 00:17:15 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2010-Aug-20 00:17:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 00:17:15 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 00:17:15 LOG5 finish_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2010-Aug-20 00:17:15 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 00:17:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 00:17:15 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 00:17:15 LOG5 end_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2010-Aug-20 00:17:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2010-Aug-20 00:17:15 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2010-Aug-20 00:17:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 00:17:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 00:17:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 00:17:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 00:17:16 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 00:17:16 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 00:17:16 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 00:17:16 LOG5 begin_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2010-Aug-20 00:17:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 00:17:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 00:17:16 INFO2 take_data: Starting WAPP 600-second scan: 23200004 2010-Aug-20 00:17:16 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 00:17:16 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-Aug-20 00:17:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 00:17:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 00:17:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 00:17:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15437.00 2010-Aug-20 00:17:16 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0001.fits 2010-Aug-20 00:17:16 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0001.fits} 2010-Aug-20 00:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 00:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 00:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 00:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 00:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:17:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 00:20:20 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 00:20:20.297 (seconds: 1220.297)!} 2010-Aug-20 00:20:20 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 00:20:20.297 (seconds: 1220.297)! 2010-Aug-20 00:20:21 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 1219.0 to 1220.0! 2010-Aug-20 00:20:22 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (1219.0 - 1221.0)! 2010-Aug-20 00:27:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 00:27:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 00:27:17 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-Aug-20 00:27:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 00:27:17 LOG5 end_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2010-Aug-20 00:27:17 LOG1 fixed_driftmap: New position: year = 2010.6352332560145 RA = 21:53:22.6 RA/Dec = 21:53:54.5 +22:33:42.9 2010-Aug-20 00:27:17 NOTE fixed_driftmap: Correcting ZA to 4:12:29.2 ... 2010-Aug-20 00:27:17 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2081072937 -CF 2010-Aug-20 00:27:17 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 00:27:17 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 00:27:17 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2010-Aug-20 00:27:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 00:27:17 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 00:27:17 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2010-Aug-20 00:27:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 00:27:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 00:27:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 00:27:17 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 00:27:17 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2010-Aug-20 00:27:17 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2081072937 -CF 2010-Aug-20 00:27:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:27:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 00:27:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 00:27:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:27:17 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 00:27:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 00:27:17 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2010-Aug-20 00:27:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 00:27:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 00:27:17 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 00:27:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 00:27:17 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-Aug-20 00:27:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:27:18 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 00:27:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 00:27:18 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-Aug-20 00:27:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 00:27:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 00:27:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 00:27:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 00:27:18 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 00:27:18 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-Aug-20 00:27:18 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 00:27:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 00:27:18 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-Aug-20 00:27:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 00:27:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 00:27:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 00:27:18 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2010-Aug-20 00:27:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 00:27:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 00:27:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 00:27:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 00:27:18 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2010-Aug-20 00:27:18 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 00:27:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 00:27:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 00:27:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 00:27:18 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2010-Aug-20 00:27:18 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 00:27:18 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 00:27:18 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Aug-20 00:27:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 00:27:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 00:27:18 INFO2 take_data: Starting WAPP 1-second scan: 23200005 2010-Aug-20 00:27:19 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 00:27:19 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Aug-20 00:27:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 00:27:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 00:27:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16040.00 2010-Aug-20 00:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 00:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 00:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 00:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 00:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:27:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 00:27:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 00:27:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 00:27:21 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Aug-20 00:27:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 00:27:21 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Aug-20 00:27:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 00:27:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 00:27:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 00:27:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 00:27:21 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-Aug-20 00:27:21 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 00:27:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 00:27:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 00:27:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 00:27:21 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2010-Aug-20 00:27:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 00:27:21 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 00:27:21 LOG5 finish_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2010-Aug-20 00:27:21 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 00:27:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 00:27:21 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 00:27:21 LOG5 end_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2010-Aug-20 00:27:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2010-Aug-20 00:27:21 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2010-Aug-20 00:27:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 00:27:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 00:27:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 00:27:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 00:27:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 00:27:22 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 00:27:22 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 00:27:22 LOG5 begin_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2010-Aug-20 00:27:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 00:27:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 00:27:22 INFO2 take_data: Starting WAPP 600-second scan: 23200006 2010-Aug-20 00:27:22 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 00:27:22 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Aug-20 00:27:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 00:27:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 00:27:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 00:27:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16043.00 2010-Aug-20 00:27:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0002.fits 2010-Aug-20 00:27:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0002.fits} 2010-Aug-20 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:27:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 00:37:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 00:37:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 00:37:23 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Aug-20 00:37:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 00:37:23 LOG5 end_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2010-Aug-20 00:37:23 LOG1 fixed_driftmap: New position: year = 2010.6352524589956 RA = 22:03:30.0 RA/Dec = 22:04:02.2 +22:33:47.5 2010-Aug-20 00:37:23 NOTE fixed_driftmap: Correcting ZA to 4:12:33.8 ... 2010-Aug-20 00:37:23 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2094023082 -CF 2010-Aug-20 00:37:23 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 00:37:23 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 00:37:23 LOG5 begin_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2010-Aug-20 00:37:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 00:37:23 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 00:37:23 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2010-Aug-20 00:37:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 00:37:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 00:37:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 00:37:23 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 00:37:23 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-Aug-20 00:37:23 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2094023082 -CF 2010-Aug-20 00:37:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:37:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 00:37:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 00:37:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:37:23 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 00:37:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 00:37:23 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2010-Aug-20 00:37:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 00:37:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 00:37:23 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 00:37:23 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 00:37:23 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2010-Aug-20 00:37:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:37:24 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 00:37:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 00:37:24 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2010-Aug-20 00:37:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 00:37:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 00:37:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 00:37:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 00:37:24 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 00:37:24 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2010-Aug-20 00:37:24 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 00:37:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 00:37:24 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2010-Aug-20 00:37:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 00:37:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 00:37:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 00:37:24 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2010-Aug-20 00:37:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 00:37:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 00:37:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 00:37:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 00:37:24 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2010-Aug-20 00:37:24 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 00:37:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 00:37:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 00:37:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 00:37:24 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2010-Aug-20 00:37:24 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 00:37:24 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 00:37:24 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Aug-20 00:37:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 00:37:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 00:37:24 INFO2 take_data: Starting WAPP 1-second scan: 23200007 2010-Aug-20 00:37:24 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 00:37:24 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-Aug-20 00:37:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 00:37:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 00:37:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16645.00 2010-Aug-20 00:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 00:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 00:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 00:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 00:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:37:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 00:37:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 00:37:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 00:37:26 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-Aug-20 00:37:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 00:37:26 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Aug-20 00:37:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 00:37:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 00:37:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 00:37:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 00:37:26 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2010-Aug-20 00:37:26 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 00:37:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 00:37:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 00:37:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 00:37:26 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2010-Aug-20 00:37:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 00:37:26 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 00:37:26 LOG5 finish_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2010-Aug-20 00:37:26 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 00:37:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 00:37:26 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 00:37:26 LOG5 end_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2010-Aug-20 00:37:26 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2010-Aug-20 00:37:26 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2010-Aug-20 00:37:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 00:37:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 00:37:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 00:37:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 00:37:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 00:37:27 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 00:37:27 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 00:37:27 LOG5 begin_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2010-Aug-20 00:37:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 00:37:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 00:37:27 INFO2 take_data: Starting WAPP 600-second scan: 23200008 2010-Aug-20 00:37:27 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 00:37:27 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Aug-20 00:37:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 00:37:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 00:37:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 00:37:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16648.00 2010-Aug-20 00:37:27 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0003.fits 2010-Aug-20 00:37:27 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0003.fits} 2010-Aug-20 00:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 00:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 00:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 00:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 00:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:37:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 00:47:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 00:47:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 00:47:28 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Aug-20 00:47:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 00:47:28 LOG5 end_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2010-Aug-20 00:47:28 LOG1 fixed_driftmap: New position: year = 2010.6352716302888 RA = 22:13:36.4 RA/Dec = 22:14:08.9 +22:33:51.8 2010-Aug-20 00:47:28 NOTE fixed_driftmap: Correcting ZA to 4:12:38.1 ... 2010-Aug-20 00:47:28 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2105917925 -CF 2010-Aug-20 00:47:28 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 00:47:28 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 00:47:28 LOG5 begin_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2010-Aug-20 00:47:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 00:47:28 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 00:47:28 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2010-Aug-20 00:47:28 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 00:47:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 00:47:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 00:47:28 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 00:47:28 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2010-Aug-20 00:47:28 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2105917925 -CF 2010-Aug-20 00:47:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:47:28 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 00:47:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 00:47:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:47:28 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 00:47:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 00:47:28 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2010-Aug-20 00:47:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 00:47:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 00:47:28 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 00:47:28 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 00:47:28 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2010-Aug-20 00:47:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:47:29 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 00:47:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 00:47:29 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2010-Aug-20 00:47:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 00:47:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 00:47:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 00:47:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 00:47:29 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 00:47:29 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2010-Aug-20 00:47:29 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 00:47:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 00:47:29 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2010-Aug-20 00:47:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 00:47:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 00:47:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 00:47:29 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2010-Aug-20 00:47:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 00:47:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 00:47:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 00:47:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 00:47:29 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2010-Aug-20 00:47:29 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 00:47:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 00:47:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 00:47:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 00:47:29 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2010-Aug-20 00:47:29 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 00:47:29 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 00:47:29 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Aug-20 00:47:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 00:47:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 00:47:29 INFO2 take_data: Starting WAPP 1-second scan: 23200009 2010-Aug-20 00:47:29 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 00:47:29 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2010-Aug-20 00:47:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 00:47:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 00:47:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17250.00 2010-Aug-20 00:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 00:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 00:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 00:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 00:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 00:47:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 00:47:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 00:47:31 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2010-Aug-20 00:47:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 00:47:31 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Aug-20 00:47:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 00:47:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 00:47:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 00:47:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 00:47:31 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-Aug-20 00:47:31 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 00:47:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 00:47:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 00:47:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 00:47:31 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2010-Aug-20 00:47:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 00:47:31 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 00:47:31 LOG5 finish_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2010-Aug-20 00:47:31 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 00:47:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 00:47:31 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 00:47:31 LOG5 end_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2010-Aug-20 00:47:31 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2010-Aug-20 00:47:31 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2010-Aug-20 00:47:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 00:47:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 00:47:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 00:47:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 00:47:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 00:47:32 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 00:47:32 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 00:47:32 LOG5 begin_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2010-Aug-20 00:47:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 00:47:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 00:47:32 INFO2 take_data: Starting WAPP 600-second scan: 23200010 2010-Aug-20 00:47:32 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 00:47:32 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2010-Aug-20 00:47:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 00:47:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 00:47:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 00:47:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17253.00 2010-Aug-20 00:47:32 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0004.fits 2010-Aug-20 00:47:32 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0004.fits} 2010-Aug-20 00:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 00:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 00:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 00:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 00:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:47:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 00:57:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 00:57:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 00:57:33 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2010-Aug-20 00:57:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 00:57:33 LOG5 end_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2010-Aug-20 00:57:33 LOG1 fixed_driftmap: New position: year = 2010.635290801582 RA = 22:23:42.9 RA/Dec = 22:24:15.5 +22:33:55.7 2010-Aug-20 00:57:33 NOTE fixed_driftmap: Correcting ZA to 4:12:42.0 ... 2010-Aug-20 00:57:33 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2116756366 -CF 2010-Aug-20 00:57:33 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 00:57:33 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 00:57:33 LOG5 begin_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2010-Aug-20 00:57:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 00:57:33 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 00:57:33 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2010-Aug-20 00:57:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 00:57:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 00:57:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 00:57:33 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 00:57:33 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2010-Aug-20 00:57:33 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2116756366 -CF 2010-Aug-20 00:57:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:57:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 00:57:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 00:57:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:57:33 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 00:57:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 00:57:33 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2010-Aug-20 00:57:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 00:57:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 00:57:33 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 00:57:33 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 00:57:33 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2010-Aug-20 00:57:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 00:57:34 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 00:57:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 00:57:34 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2010-Aug-20 00:57:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 00:57:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 00:57:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 00:57:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 00:57:34 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 00:57:34 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2010-Aug-20 00:57:34 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 00:57:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 00:57:34 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2010-Aug-20 00:57:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 00:57:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 00:57:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 00:57:34 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2010-Aug-20 00:57:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 00:57:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 00:57:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 00:57:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 00:57:34 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2010-Aug-20 00:57:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 00:57:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 00:57:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 00:57:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 00:57:34 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2010-Aug-20 00:57:34 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 00:57:34 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 00:57:34 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Aug-20 00:57:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 00:57:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 00:57:34 INFO2 take_data: Starting WAPP 1-second scan: 23200011 2010-Aug-20 00:57:34 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 00:57:34 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2010-Aug-20 00:57:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 00:57:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 00:57:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17855.00 2010-Aug-20 00:57:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 00:57:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 00:57:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 00:57:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:57:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:57:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 00:57:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:57:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:57:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 00:57:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 00:57:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 00:57:36 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2010-Aug-20 00:57:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 00:57:36 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Aug-20 00:57:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 00:57:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 00:57:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 00:57:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 00:57:36 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2010-Aug-20 00:57:37 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 00:57:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 00:57:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 00:57:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 00:57:37 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2010-Aug-20 00:57:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 00:57:37 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 00:57:37 LOG5 finish_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2010-Aug-20 00:57:37 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 00:57:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 00:57:37 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 00:57:37 LOG5 end_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2010-Aug-20 00:57:37 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2010-Aug-20 00:57:37 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2010-Aug-20 00:57:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 00:57:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 00:57:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 00:57:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 00:57:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 00:57:37 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 00:57:37 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 00:57:37 LOG5 begin_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2010-Aug-20 00:57:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 00:57:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 00:57:37 INFO2 take_data: Starting WAPP 600-second scan: 23200012 2010-Aug-20 00:57:37 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 00:57:37 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Aug-20 00:57:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 00:57:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 00:57:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 00:57:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17858.00 2010-Aug-20 00:57:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0005.fits 2010-Aug-20 00:57:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0005.fits} 2010-Aug-20 00:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 00:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 00:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 00:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 00:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 00:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 00:57:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 01:07:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 01:07:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 01:07:38 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Aug-20 01:07:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 01:07:38 LOG5 end_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2010-Aug-20 01:07:38 LOG1 fixed_driftmap: New position: year = 2010.6353099728751 RA = 22:33:49.3 RA/Dec = 22:34:22.2 +22:33:59.2 2010-Aug-20 01:07:38 NOTE fixed_driftmap: Correcting ZA to 4:12:45.5 ... 2010-Aug-20 01:07:38 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2126517452 -CF 2010-Aug-20 01:07:38 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 01:07:38 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 01:07:38 LOG5 begin_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2010-Aug-20 01:07:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 01:07:38 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 01:07:38 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2010-Aug-20 01:07:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 01:07:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 01:07:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 01:07:38 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 01:07:38 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2010-Aug-20 01:07:38 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2126517452 -CF 2010-Aug-20 01:07:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:07:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 01:07:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 01:07:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:07:39 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 01:07:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 01:07:39 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2010-Aug-20 01:07:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 01:07:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 01:07:39 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 01:07:39 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 01:07:39 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2010-Aug-20 01:07:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:07:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 01:07:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 01:07:39 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2010-Aug-20 01:07:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 01:07:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 01:07:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 01:07:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 01:07:39 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 01:07:39 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2010-Aug-20 01:07:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 01:07:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 01:07:39 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2010-Aug-20 01:07:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 01:07:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 01:07:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 01:07:39 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2010-Aug-20 01:07:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 01:07:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 01:07:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 01:07:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 01:07:40 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2010-Aug-20 01:07:40 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 01:07:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 01:07:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 01:07:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 01:07:40 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2010-Aug-20 01:07:40 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 01:07:40 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 01:07:40 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-Aug-20 01:07:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 01:07:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 01:07:40 INFO2 take_data: Starting WAPP 1-second scan: 23200013 2010-Aug-20 01:07:40 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 01:07:40 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2010-Aug-20 01:07:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 01:07:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 01:07:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18461.00 2010-Aug-20 01:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 01:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 01:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 01:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 01:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:07:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 01:07:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 01:07:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 01:07:42 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2010-Aug-20 01:07:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 01:07:42 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-Aug-20 01:07:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 01:07:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 01:07:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 01:07:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 01:07:42 LOG5 begin_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2010-Aug-20 01:07:42 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 01:07:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 01:07:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 01:07:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 01:07:42 LOG5 end_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2010-Aug-20 01:07:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 01:07:42 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 01:07:42 LOG5 finish_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2010-Aug-20 01:07:42 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 01:07:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 01:07:42 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 01:07:42 LOG5 end_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2010-Aug-20 01:07:43 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2010-Aug-20 01:07:43 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2010-Aug-20 01:07:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 01:07:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 01:07:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 01:07:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 01:07:43 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 01:07:43 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 01:07:43 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 01:07:43 LOG5 begin_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2010-Aug-20 01:07:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 01:07:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 01:07:43 INFO2 take_data: Starting WAPP 600-second scan: 23200014 2010-Aug-20 01:07:43 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 01:07:43 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Aug-20 01:07:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 01:07:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 01:07:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 01:07:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18464.00 2010-Aug-20 01:07:43 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0006.fits 2010-Aug-20 01:07:43 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0006.fits} 2010-Aug-20 01:07:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 01:07:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 01:07:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 01:07:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:07:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:07:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 01:07:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:07:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:07:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 01:17:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 01:17:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 01:17:44 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Aug-20 01:17:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 01:17:44 LOG5 end_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2010-Aug-20 01:17:44 LOG1 fixed_driftmap: New position: year = 2010.6353291758562 RA = 22:43:56.7 RA/Dec = 22:44:29.8 +22:34:02.4 2010-Aug-20 01:17:44 NOTE fixed_driftmap: Correcting ZA to 4:12:48.7 ... 2010-Aug-20 01:17:44 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2135195518 -CF 2010-Aug-20 01:17:44 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 01:17:44 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 01:17:44 LOG5 begin_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2010-Aug-20 01:17:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 01:17:44 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 01:17:44 LOG5 begin_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2010-Aug-20 01:17:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 01:17:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 01:17:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 01:17:44 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 01:17:44 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2010-Aug-20 01:17:44 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2135195518 -CF 2010-Aug-20 01:17:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:17:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 01:17:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 01:17:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:17:44 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 01:17:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 01:17:44 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2010-Aug-20 01:17:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 01:17:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 01:17:45 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 01:17:45 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 01:17:45 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2010-Aug-20 01:17:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:17:45 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 01:17:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 01:17:45 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2010-Aug-20 01:17:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 01:17:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 01:17:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 01:17:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 01:17:45 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 01:17:45 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2010-Aug-20 01:17:45 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 01:17:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 01:17:45 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2010-Aug-20 01:17:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 01:17:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 01:17:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 01:17:45 LOG5 end_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2010-Aug-20 01:17:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 01:17:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 01:17:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 01:17:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 01:17:45 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2010-Aug-20 01:17:45 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 01:17:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 01:17:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 01:17:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 01:17:45 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2010-Aug-20 01:17:45 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 01:17:45 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 01:17:45 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Aug-20 01:17:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 01:17:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 01:17:45 INFO2 take_data: Starting WAPP 1-second scan: 23200015 2010-Aug-20 01:17:45 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 01:17:45 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2010-Aug-20 01:17:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 01:17:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 01:17:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19066.00 2010-Aug-20 01:17:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 01:17:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 01:17:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 01:17:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:17:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:17:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 01:17:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:17:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:17:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 01:17:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 01:17:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 01:17:47 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2010-Aug-20 01:17:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 01:17:47 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Aug-20 01:17:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 01:17:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 01:17:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 01:17:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 01:17:47 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2010-Aug-20 01:17:47 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 01:17:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 01:17:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 01:17:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 01:17:47 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2010-Aug-20 01:17:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 01:17:47 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 01:17:47 LOG5 finish_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2010-Aug-20 01:17:47 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 01:17:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 01:17:47 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 01:17:47 LOG5 end_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2010-Aug-20 01:17:47 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2010-Aug-20 01:17:47 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2010-Aug-20 01:17:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 01:17:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 01:17:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 01:17:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 01:17:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 01:17:48 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 01:17:48 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 01:17:48 LOG5 begin_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2010-Aug-20 01:17:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 01:17:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 01:17:48 INFO2 take_data: Starting WAPP 600-second scan: 23200016 2010-Aug-20 01:17:48 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 01:17:48 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Aug-20 01:17:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 01:17:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 01:17:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 01:17:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19069.00 2010-Aug-20 01:17:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0007.fits 2010-Aug-20 01:17:48 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0007.fits} 2010-Aug-20 01:17:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 01:17:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 01:17:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 01:17:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:17:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:17:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 01:17:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:17:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:17:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 01:27:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 01:27:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 01:27:49 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Aug-20 01:27:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 01:27:49 LOG5 end_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2010-Aug-20 01:27:49 LOG1 fixed_driftmap: New position: year = 2010.6353483471494 RA = 22:54:03.1 RA/Dec = 22:54:36.5 +22:34:05.1 2010-Aug-20 01:27:49 NOTE fixed_driftmap: Correcting ZA to 4:12:51.4 ... 2010-Aug-20 01:27:49 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2142745140 -CF 2010-Aug-20 01:27:49 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 01:27:49 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 01:27:49 LOG5 begin_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2010-Aug-20 01:27:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 01:27:49 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 01:27:49 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2010-Aug-20 01:27:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 01:27:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 01:27:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 01:27:49 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 01:27:49 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2010-Aug-20 01:27:49 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2142745140 -CF 2010-Aug-20 01:27:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:27:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 01:27:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 01:27:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:27:49 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 01:27:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 01:27:49 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2010-Aug-20 01:27:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 01:27:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 01:27:49 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 01:27:49 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 01:27:49 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2010-Aug-20 01:27:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:27:49 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 01:27:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 01:27:49 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2010-Aug-20 01:27:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 01:27:50 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 01:27:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 01:27:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 01:27:50 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 01:27:50 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2010-Aug-20 01:27:50 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 01:27:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 01:27:50 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2010-Aug-20 01:27:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 01:27:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 01:27:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 01:27:50 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2010-Aug-20 01:27:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 01:27:50 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 01:27:50 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 01:27:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 01:27:50 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2010-Aug-20 01:27:50 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 01:27:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 01:27:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 01:27:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 01:27:50 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2010-Aug-20 01:27:50 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 01:27:50 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 01:27:50 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Aug-20 01:27:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 01:27:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 01:27:50 INFO2 take_data: Starting WAPP 1-second scan: 23200017 2010-Aug-20 01:27:50 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 01:27:50 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2010-Aug-20 01:27:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 01:27:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 01:27:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19671.00 2010-Aug-20 01:27:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 01:27:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 01:27:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 01:27:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:27:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:27:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 01:27:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:27:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:27:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 01:27:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 01:27:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 01:27:52 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2010-Aug-20 01:27:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 01:27:52 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Aug-20 01:27:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 01:27:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 01:27:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 01:27:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 01:27:52 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2010-Aug-20 01:27:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 01:27:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 01:27:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 01:27:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 01:27:53 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2010-Aug-20 01:27:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 01:27:53 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 01:27:53 LOG5 finish_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2010-Aug-20 01:27:53 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 01:27:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 01:27:53 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 01:27:53 LOG5 end_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2010-Aug-20 01:27:53 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2010-Aug-20 01:27:53 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2010-Aug-20 01:27:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 01:27:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 01:27:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 01:27:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 01:27:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 01:27:53 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 01:27:53 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 01:27:53 LOG5 begin_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2010-Aug-20 01:27:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 01:27:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 01:27:53 INFO2 take_data: Starting WAPP 600-second scan: 23200018 2010-Aug-20 01:27:53 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 01:27:53 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2010-Aug-20 01:27:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 01:27:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 01:27:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 01:27:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19674.00 2010-Aug-20 01:27:53 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0008.fits 2010-Aug-20 01:27:53 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0008.fits} 2010-Aug-20 01:27:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 01:27:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 01:27:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 01:27:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:27:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:27:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 01:27:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:27:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:27:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 01:37:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 01:37:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 01:37:54 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2010-Aug-20 01:37:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 01:37:54 LOG5 end_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2010-Aug-20 01:37:54 LOG1 fixed_driftmap: New position: year = 2010.6353675184425 RA = 23:04:09.6 RA/Dec = 23:04:43.2 +22:34:07.4 2010-Aug-20 01:37:54 NOTE fixed_driftmap: Correcting ZA to 4:12:53.7 ... 2010-Aug-20 01:37:54 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2149166830 -CF 2010-Aug-20 01:37:54 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 01:37:54 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 01:37:54 LOG5 begin_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2010-Aug-20 01:37:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 01:37:54 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 01:37:54 LOG5 begin_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2010-Aug-20 01:37:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 01:37:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 01:37:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 01:37:54 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 01:37:54 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2010-Aug-20 01:37:54 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2149166830 -CF 2010-Aug-20 01:37:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:37:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 01:37:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 01:37:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:37:55 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 01:37:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 01:37:55 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2010-Aug-20 01:37:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 01:37:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 01:37:55 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 01:37:55 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 01:37:55 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2010-Aug-20 01:37:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:37:55 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 01:37:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 01:37:55 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2010-Aug-20 01:37:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 01:37:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 01:37:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 01:37:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 01:37:55 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 01:37:55 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2010-Aug-20 01:37:55 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 01:37:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 01:37:55 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2010-Aug-20 01:37:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 01:37:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 01:37:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 01:37:55 LOG5 end_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2010-Aug-20 01:37:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 01:37:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 01:37:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 01:37:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 01:37:55 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2010-Aug-20 01:37:55 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 01:37:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 01:37:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 01:37:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 01:37:55 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2010-Aug-20 01:37:55 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 01:37:55 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 01:37:55 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2010-Aug-20 01:37:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 01:37:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 01:37:55 INFO2 take_data: Starting WAPP 1-second scan: 23200019 2010-Aug-20 01:37:56 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 01:37:56 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2010-Aug-20 01:37:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 01:37:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 01:37:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20277.00 2010-Aug-20 01:37:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 01:37:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 01:37:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 01:37:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:37:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:37:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 01:37:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:37:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:37:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 01:37:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 01:37:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 01:37:58 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2010-Aug-20 01:37:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 01:37:58 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2010-Aug-20 01:37:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 01:37:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 01:37:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 01:37:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 01:37:58 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2010-Aug-20 01:37:58 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 01:37:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 01:37:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 01:37:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 01:37:58 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2010-Aug-20 01:37:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 01:37:58 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 01:37:58 LOG5 finish_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2010-Aug-20 01:37:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 01:37:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 01:37:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 01:37:58 LOG5 end_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2010-Aug-20 01:37:58 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2010-Aug-20 01:37:58 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2010-Aug-20 01:37:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 01:37:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 01:37:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 01:37:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 01:37:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 01:37:59 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 01:37:59 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 01:37:59 LOG5 begin_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2010-Aug-20 01:37:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 01:37:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 01:37:59 INFO2 take_data: Starting WAPP 600-second scan: 23200020 2010-Aug-20 01:37:59 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 01:37:59 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2010-Aug-20 01:37:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 01:37:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 01:37:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 01:37:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20280.00 2010-Aug-20 01:37:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0009.fits 2010-Aug-20 01:37:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0009.fits} 2010-Aug-20 01:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 01:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 01:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 01:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 01:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 01:48:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 01:48:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 01:48:00 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2010-Aug-20 01:48:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 01:48:00 LOG5 end_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2010-Aug-20 01:48:00 LOG1 fixed_driftmap: New position: year = 2010.6353867214239 RA = 23:14:17.0 RA/Dec = 23:14:50.8 +22:34:09.3 2010-Aug-20 01:48:00 NOTE fixed_driftmap: Correcting ZA to 4:12:55.6 ... 2010-Aug-20 01:48:00 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2154455853 -CF 2010-Aug-20 01:48:00 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 01:48:00 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 01:48:00 LOG5 begin_task: Level: (2) ID = <10255> Status = 0 0 0 0 ok 2010-Aug-20 01:48:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 01:48:00 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 01:48:00 LOG5 begin_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2010-Aug-20 01:48:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 01:48:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 01:48:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 01:48:00 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 01:48:00 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2010-Aug-20 01:48:00 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2154455853 -CF 2010-Aug-20 01:48:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:48:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 01:48:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 01:48:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:48:00 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 01:48:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 01:48:00 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2010-Aug-20 01:48:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 01:48:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 01:48:00 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 01:48:00 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 01:48:00 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2010-Aug-20 01:48:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:48:01 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 01:48:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 01:48:01 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2010-Aug-20 01:48:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 01:48:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 01:48:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 01:48:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 01:48:01 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 01:48:01 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2010-Aug-20 01:48:01 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 01:48:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 01:48:01 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2010-Aug-20 01:48:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 01:48:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 01:48:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 01:48:01 LOG5 end_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2010-Aug-20 01:48:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 01:48:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 01:48:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 01:48:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 01:48:01 LOG5 begin_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2010-Aug-20 01:48:01 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 01:48:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 01:48:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 01:48:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 01:48:01 LOG5 end_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2010-Aug-20 01:48:01 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 01:48:01 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 01:48:01 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2010-Aug-20 01:48:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 01:48:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 01:48:01 INFO2 take_data: Starting WAPP 1-second scan: 23200021 2010-Aug-20 01:48:01 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 01:48:01 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2010-Aug-20 01:48:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 01:48:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 01:48:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20882.00 2010-Aug-20 01:48:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 01:48:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 01:48:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 01:48:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:48:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:48:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 01:48:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:48:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:48:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 01:48:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 01:48:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 01:48:03 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2010-Aug-20 01:48:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 01:48:03 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2010-Aug-20 01:48:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 01:48:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 01:48:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 01:48:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 01:48:03 LOG5 begin_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2010-Aug-20 01:48:03 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 01:48:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 01:48:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 01:48:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 01:48:03 LOG5 end_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2010-Aug-20 01:48:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 01:48:03 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 01:48:03 LOG5 finish_task: Level: (2) ID = <10255> Status = 0 0 0 0 ok 2010-Aug-20 01:48:03 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 01:48:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 01:48:03 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 01:48:03 LOG5 end_task: Level: (2) ID = <10255> Status = 0 0 0 0 ok 2010-Aug-20 01:48:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2010-Aug-20 01:48:03 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2010-Aug-20 01:48:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 01:48:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 01:48:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 01:48:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 01:48:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 01:48:04 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 01:48:04 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 01:48:04 LOG5 begin_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2010-Aug-20 01:48:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 01:48:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 01:48:04 INFO2 take_data: Starting WAPP 600-second scan: 23200022 2010-Aug-20 01:48:04 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 01:48:04 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2010-Aug-20 01:48:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 01:48:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 01:48:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 01:48:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20885.00 2010-Aug-20 01:48:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0010.fits 2010-Aug-20 01:48:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0010.fits} 2010-Aug-20 01:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 01:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 01:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 01:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 01:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 01:58:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 01:58:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 01:58:05 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2010-Aug-20 01:58:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 01:58:05 LOG5 end_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2010-Aug-20 01:58:05 LOG1 fixed_driftmap: New position: year = 2010.635405892717 RA = 23:24:23.4 RA/Dec = 23:24:57.5 +22:34:10.8 2010-Aug-20 01:58:05 NOTE fixed_driftmap: Correcting ZA to 4:12:57.1 ... 2010-Aug-20 01:58:05 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2158584467 -CF 2010-Aug-20 01:58:05 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 01:58:05 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 01:58:05 LOG5 begin_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2010-Aug-20 01:58:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 01:58:05 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 01:58:05 LOG5 begin_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2010-Aug-20 01:58:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 01:58:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 01:58:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 01:58:05 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 01:58:05 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2010-Aug-20 01:58:05 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2158584467 -CF 2010-Aug-20 01:58:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:58:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 01:58:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 01:58:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:58:05 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 01:58:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 01:58:05 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2010-Aug-20 01:58:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 01:58:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 01:58:05 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 01:58:05 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 01:58:05 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2010-Aug-20 01:58:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 01:58:06 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 01:58:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 01:58:06 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2010-Aug-20 01:58:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 01:58:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 01:58:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 01:58:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 01:58:06 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 01:58:06 LOG5 begin_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2010-Aug-20 01:58:06 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 01:58:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 01:58:06 LOG5 end_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2010-Aug-20 01:58:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 01:58:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 01:58:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 01:58:06 LOG5 end_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2010-Aug-20 01:58:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 01:58:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 01:58:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 01:58:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 01:58:06 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2010-Aug-20 01:58:06 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 01:58:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 01:58:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 01:58:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 01:58:06 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2010-Aug-20 01:58:06 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 01:58:06 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 01:58:06 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2010-Aug-20 01:58:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 01:58:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 01:58:06 INFO2 take_data: Starting WAPP 1-second scan: 23200023 2010-Aug-20 01:58:06 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 01:58:06 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2010-Aug-20 01:58:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 01:58:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 01:58:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21487.00 2010-Aug-20 01:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 01:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 01:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 01:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 01:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:58:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 01:58:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 01:58:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 01:58:08 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2010-Aug-20 01:58:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 01:58:08 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2010-Aug-20 01:58:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 01:58:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 01:58:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 01:58:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 01:58:08 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2010-Aug-20 01:58:08 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 01:58:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 01:58:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 01:58:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 01:58:08 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2010-Aug-20 01:58:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 01:58:08 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 01:58:08 LOG5 finish_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2010-Aug-20 01:58:08 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 01:58:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 01:58:08 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 01:58:08 LOG5 end_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2010-Aug-20 01:58:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2010-Aug-20 01:58:08 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2010-Aug-20 01:58:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 01:58:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 01:58:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 01:58:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 01:58:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 01:58:09 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 01:58:09 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 01:58:09 LOG5 begin_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2010-Aug-20 01:58:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 01:58:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 01:58:09 INFO2 take_data: Starting WAPP 600-second scan: 23200024 2010-Aug-20 01:58:09 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 01:58:09 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2010-Aug-20 01:58:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 01:58:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 01:58:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 01:58:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21490.00 2010-Aug-20 01:58:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0011.fits 2010-Aug-20 01:58:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0011.fits} 2010-Aug-20 01:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 01:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 01:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 01:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 01:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 01:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 01:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 02:08:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 02:08:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 02:08:10 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2010-Aug-20 02:08:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 02:08:10 LOG5 end_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2010-Aug-20 02:08:10 LOG1 fixed_driftmap: New position: year = 2010.63542506401 RA = 23:34:29.8 RA/Dec = 23:35:04.1 +22:34:11.9 2010-Aug-20 02:08:10 NOTE fixed_driftmap: Correcting ZA to 4:12:58.2 ... 2010-Aug-20 02:08:10 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2161554344 -CF 2010-Aug-20 02:08:10 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 02:08:10 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 02:08:10 LOG5 begin_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2010-Aug-20 02:08:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 02:08:10 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 02:08:10 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2010-Aug-20 02:08:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 02:08:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 02:08:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 02:08:10 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 02:08:10 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2010-Aug-20 02:08:10 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2161554344 -CF 2010-Aug-20 02:08:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:08:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 02:08:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 02:08:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:08:10 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 02:08:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 02:08:10 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2010-Aug-20 02:08:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 02:08:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 02:08:10 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 02:08:10 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 02:08:10 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2010-Aug-20 02:08:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:08:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 02:08:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 02:08:11 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2010-Aug-20 02:08:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 02:08:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 02:08:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 02:08:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 02:08:12 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 02:08:12 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2010-Aug-20 02:08:12 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 02:08:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 02:08:12 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2010-Aug-20 02:08:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 02:08:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 02:08:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 02:08:12 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2010-Aug-20 02:08:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 02:08:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 02:08:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 02:08:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 02:08:12 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2010-Aug-20 02:08:12 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 02:08:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 02:08:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 02:08:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 02:08:12 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2010-Aug-20 02:08:12 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 02:08:12 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 02:08:12 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Aug-20 02:08:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 02:08:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 02:08:12 INFO2 take_data: Starting WAPP 1-second scan: 23200025 2010-Aug-20 02:08:12 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 02:08:12 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2010-Aug-20 02:08:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 02:08:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 02:08:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22093.00 2010-Aug-20 02:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 02:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 02:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 02:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 02:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:08:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 02:08:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 02:08:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 02:08:14 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2010-Aug-20 02:08:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 02:08:14 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Aug-20 02:08:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 02:08:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 02:08:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 02:08:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 02:08:14 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2010-Aug-20 02:08:14 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 02:08:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 02:08:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 02:08:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 02:08:14 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2010-Aug-20 02:08:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 02:08:15 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 02:08:15 LOG5 finish_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2010-Aug-20 02:08:15 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 02:08:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 02:08:15 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 02:08:15 LOG5 end_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2010-Aug-20 02:08:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2010-Aug-20 02:08:15 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2010-Aug-20 02:08:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 02:08:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 02:08:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 02:08:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 02:08:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 02:08:15 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 02:08:15 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 02:08:15 LOG5 begin_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2010-Aug-20 02:08:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 02:08:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 02:08:15 INFO2 take_data: Starting WAPP 600-second scan: 23200026 2010-Aug-20 02:08:15 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 02:08:15 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2010-Aug-20 02:08:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 02:08:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 02:08:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 02:08:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22096.00 2010-Aug-20 02:08:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0012.fits 2010-Aug-20 02:08:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0012.fits} 2010-Aug-20 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 02:18:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 02:18:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 02:18:16 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2010-Aug-20 02:18:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 02:18:16 LOG5 end_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2010-Aug-20 02:18:16 LOG1 fixed_driftmap: New position: year = 2010.6354442669913 RA = 23:44:37.2 RA/Dec = 23:45:11.8 +22:34:12.5 2010-Aug-20 02:18:16 NOTE fixed_driftmap: Correcting ZA to 4:12:58.8 ... 2010-Aug-20 02:18:16 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2163361687 -CF 2010-Aug-20 02:18:16 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 02:18:16 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 02:18:16 LOG5 begin_task: Level: (2) ID = <10288> Status = 0 0 0 0 ok 2010-Aug-20 02:18:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 02:18:16 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 02:18:16 LOG5 begin_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2010-Aug-20 02:18:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 02:18:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 02:18:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 02:18:16 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 02:18:16 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2010-Aug-20 02:18:16 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2163361687 -CF 2010-Aug-20 02:18:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:18:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 02:18:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 02:18:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:18:17 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 02:18:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 02:18:17 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2010-Aug-20 02:18:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 02:18:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 02:18:17 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 02:18:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 02:18:17 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2010-Aug-20 02:18:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:18:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 02:18:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 02:18:17 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2010-Aug-20 02:18:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 02:18:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 02:18:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 02:18:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 02:18:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 02:18:17 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2010-Aug-20 02:18:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 02:18:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 02:18:17 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2010-Aug-20 02:18:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 02:18:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 02:18:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 02:18:17 LOG5 end_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2010-Aug-20 02:18:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 02:18:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 02:18:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 02:18:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 02:18:17 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2010-Aug-20 02:18:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 02:18:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 02:18:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 02:18:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 02:18:17 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2010-Aug-20 02:18:17 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 02:18:17 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 02:18:17 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Aug-20 02:18:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 02:18:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 02:18:17 INFO2 take_data: Starting WAPP 1-second scan: 23200027 2010-Aug-20 02:18:18 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 02:18:18 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2010-Aug-20 02:18:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 02:18:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 02:18:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22699.00 2010-Aug-20 02:18:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 02:18:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 02:18:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 02:18:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:18:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:18:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 02:18:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:18:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:18:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 02:18:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 02:18:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 02:18:20 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2010-Aug-20 02:18:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 02:18:20 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Aug-20 02:18:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 02:18:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 02:18:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 02:18:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 02:18:20 LOG5 begin_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2010-Aug-20 02:18:20 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 02:18:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 02:18:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 02:18:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 02:18:20 LOG5 end_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2010-Aug-20 02:18:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 02:18:20 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 02:18:20 LOG5 finish_task: Level: (2) ID = <10288> Status = 0 0 0 0 ok 2010-Aug-20 02:18:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 02:18:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 02:18:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 02:18:20 LOG5 end_task: Level: (2) ID = <10288> Status = 0 0 0 0 ok 2010-Aug-20 02:18:20 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2010-Aug-20 02:18:20 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2010-Aug-20 02:18:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 02:18:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 02:18:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 02:18:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 02:18:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 02:18:21 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 02:18:21 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 02:18:21 LOG5 begin_task: Level: (2) ID = <10297> Status = 0 0 0 0 ok 2010-Aug-20 02:18:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 02:18:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 02:18:21 INFO2 take_data: Starting WAPP 600-second scan: 23200028 2010-Aug-20 02:18:21 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 02:18:21 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2010-Aug-20 02:18:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 02:18:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 02:18:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 02:18:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22702.00 2010-Aug-20 02:18:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0013.fits 2010-Aug-20 02:18:21 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0013.fits} 2010-Aug-20 02:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 02:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 02:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 02:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 02:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 02:28:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 02:28:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 02:28:22 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2010-Aug-20 02:28:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 02:28:22 LOG5 end_task: Level: (2) ID = <10297> Status = 0 0 0 0 ok 2010-Aug-20 02:28:22 LOG1 fixed_driftmap: New position: year = 2010.6354634699724 RA = 23:54:44.7 RA/Dec = 23:55:19.5 +22:34:12.7 2010-Aug-20 02:28:22 NOTE fixed_driftmap: Correcting ZA to 4:12:59.0 ... 2010-Aug-20 02:28:22 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2163997107 -CF 2010-Aug-20 02:28:22 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 02:28:22 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 02:28:22 LOG5 begin_task: Level: (2) ID = <10299> Status = 0 0 0 0 ok 2010-Aug-20 02:28:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 02:28:22 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 02:28:22 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2010-Aug-20 02:28:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 02:28:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 02:28:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 02:28:22 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 02:28:22 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2010-Aug-20 02:28:22 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2163997107 -CF 2010-Aug-20 02:28:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:28:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 02:28:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 02:28:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:28:22 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 02:28:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 02:28:22 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2010-Aug-20 02:28:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 02:28:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 02:28:22 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 02:28:22 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 02:28:22 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2010-Aug-20 02:28:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:28:23 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 02:28:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 02:28:23 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2010-Aug-20 02:28:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 02:28:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 02:28:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 02:28:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 02:28:23 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 02:28:23 LOG5 begin_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2010-Aug-20 02:28:23 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 02:28:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 02:28:23 LOG5 end_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2010-Aug-20 02:28:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 02:28:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 02:28:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 02:28:23 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2010-Aug-20 02:28:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 02:28:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 02:28:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 02:28:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 02:28:23 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2010-Aug-20 02:28:23 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 02:28:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 02:28:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 02:28:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 02:28:23 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2010-Aug-20 02:28:23 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 02:28:23 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 02:28:23 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2010-Aug-20 02:28:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 02:28:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 02:28:23 INFO2 take_data: Starting WAPP 1-second scan: 23200029 2010-Aug-20 02:28:23 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 02:28:23 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2010-Aug-20 02:28:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 02:28:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 02:28:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23304.00 2010-Aug-20 02:28:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 02:28:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 02:28:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 02:28:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:28:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:28:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 02:28:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:28:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:28:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 02:28:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 02:28:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 02:28:25 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2010-Aug-20 02:28:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 02:28:25 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2010-Aug-20 02:28:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 02:28:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 02:28:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 02:28:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 02:28:25 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2010-Aug-20 02:28:25 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 02:28:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 02:28:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 02:28:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 02:28:25 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2010-Aug-20 02:28:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 02:28:25 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 02:28:25 LOG5 finish_task: Level: (2) ID = <10299> Status = 0 0 0 0 ok 2010-Aug-20 02:28:25 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 02:28:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 02:28:25 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 02:28:25 LOG5 end_task: Level: (2) ID = <10299> Status = 0 0 0 0 ok 2010-Aug-20 02:28:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2010-Aug-20 02:28:25 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2010-Aug-20 02:28:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 02:28:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 02:28:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 02:28:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 02:28:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 02:28:26 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 02:28:26 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 02:28:26 LOG5 begin_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2010-Aug-20 02:28:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 02:28:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 02:28:26 INFO2 take_data: Starting WAPP 600-second scan: 23200030 2010-Aug-20 02:28:26 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 02:28:26 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2010-Aug-20 02:28:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 02:28:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 02:28:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 02:28:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23307.00 2010-Aug-20 02:28:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0014.fits 2010-Aug-20 02:28:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0014.fits} 2010-Aug-20 02:28:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 02:28:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 02:28:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 02:28:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:28:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:28:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 02:28:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:28:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:28:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 02:38:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 02:38:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 02:38:27 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2010-Aug-20 02:38:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 02:38:27 LOG5 end_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2010-Aug-20 02:38:27 LOG1 fixed_driftmap: New position: year = 2010.6354826412655 RA = 00:04:51.1 RA/Dec = 00:05:26.1 +22:34:12.5 2010-Aug-20 02:38:27 NOTE fixed_driftmap: Correcting ZA to 4:12:58.8 ... 2010-Aug-20 02:38:27 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2163461199 -CF 2010-Aug-20 02:38:27 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 02:38:27 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 02:38:27 LOG5 begin_task: Level: (2) ID = <10310> Status = 0 0 0 0 ok 2010-Aug-20 02:38:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 02:38:27 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 02:38:27 LOG5 begin_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2010-Aug-20 02:38:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 02:38:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 02:38:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 02:38:27 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 02:38:27 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2010-Aug-20 02:38:27 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2163461199 -CF 2010-Aug-20 02:38:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:38:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 02:38:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 02:38:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:38:27 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 02:38:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 02:38:27 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2010-Aug-20 02:38:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 02:38:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 02:38:27 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 02:38:27 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 02:38:27 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2010-Aug-20 02:38:27 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:38:29 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 02:38:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 02:38:29 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2010-Aug-20 02:38:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 02:38:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 02:38:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 02:38:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 02:38:29 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 02:38:29 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2010-Aug-20 02:38:29 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 02:38:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 02:38:29 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2010-Aug-20 02:38:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 02:38:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 02:38:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 02:38:29 LOG5 end_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2010-Aug-20 02:38:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 02:38:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 02:38:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 02:38:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 02:38:29 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2010-Aug-20 02:38:29 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 02:38:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 02:38:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 02:38:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 02:38:29 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2010-Aug-20 02:38:29 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 02:38:29 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 02:38:29 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2010-Aug-20 02:38:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 02:38:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 02:38:29 INFO2 take_data: Starting WAPP 1-second scan: 23200031 2010-Aug-20 02:38:29 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 02:38:29 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2010-Aug-20 02:38:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 02:38:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 02:38:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23910.00 2010-Aug-20 02:38:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 02:38:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 02:38:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 02:38:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:38:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:38:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 02:38:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:38:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:38:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 02:38:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 02:38:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 02:38:31 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2010-Aug-20 02:38:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 02:38:31 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2010-Aug-20 02:38:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 02:38:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 02:38:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 02:38:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 02:38:31 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2010-Aug-20 02:38:31 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 02:38:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 02:38:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 02:38:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 02:38:31 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2010-Aug-20 02:38:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 02:38:31 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 02:38:31 LOG5 finish_task: Level: (2) ID = <10310> Status = 0 0 0 0 ok 2010-Aug-20 02:38:31 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 02:38:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 02:38:31 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 02:38:31 LOG5 end_task: Level: (2) ID = <10310> Status = 0 0 0 0 ok 2010-Aug-20 02:38:31 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2010-Aug-20 02:38:32 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2010-Aug-20 02:38:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 02:38:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 02:38:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 02:38:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 02:38:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 02:38:32 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 02:38:32 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 02:38:32 LOG5 begin_task: Level: (2) ID = <10319> Status = 0 0 0 0 ok 2010-Aug-20 02:38:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 02:38:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 02:38:32 INFO2 take_data: Starting WAPP 600-second scan: 23200032 2010-Aug-20 02:38:32 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 02:38:32 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2010-Aug-20 02:38:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 02:38:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 02:38:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 02:38:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23913.00 2010-Aug-20 02:38:32 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0015.fits 2010-Aug-20 02:38:32 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0015.fits} 2010-Aug-20 02:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 02:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 02:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 02:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 02:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:38:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 02:38:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too much power (2.080 > 2.0)! 2010-Aug-20 02:38:43 LOG4 check_wapp_levels: WAPP-1 power levels: 0.887 0.933 0.940 0.984 2010-Aug-20 02:38:43 LOG4 check_wapp_levels: WAPP-2 power levels: 2.080 1.914 1.057 1.172 2010-Aug-20 02:38:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 0.894 1.097 1.085 2010-Aug-20 02:38:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.883 1.020 1.039 2010-Aug-20 02:38:45 INFO5 check_wapp_levels: WAPP power levels are now OK between 0.879 and 1.105 2010-Aug-20 02:48:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 02:48:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 02:48:33 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2010-Aug-20 02:48:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 02:48:33 LOG5 end_task: Level: (2) ID = <10319> Status = 0 0 0 0 ok 2010-Aug-20 02:48:33 LOG1 fixed_driftmap: New position: year = 2010.6355018442468 RA = 00:14:58.5 RA/Dec = 00:15:33.8 +22:34:11.9 2010-Aug-20 02:48:33 NOTE fixed_driftmap: Correcting ZA to 4:12:58.2 ... 2010-Aug-20 02:48:33 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2161753229 -CF 2010-Aug-20 02:48:33 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 02:48:33 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 02:48:33 LOG5 begin_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2010-Aug-20 02:48:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 02:48:33 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 02:48:33 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2010-Aug-20 02:48:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 02:48:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 02:48:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 02:48:33 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 02:48:33 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2010-Aug-20 02:48:33 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2161753229 -CF 2010-Aug-20 02:48:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:48:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 02:48:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 02:48:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:48:33 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 02:48:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 02:48:33 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2010-Aug-20 02:48:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 02:48:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 02:48:33 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 02:48:33 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 02:48:33 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2010-Aug-20 02:48:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:48:34 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 02:48:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 02:48:34 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2010-Aug-20 02:48:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 02:48:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 02:48:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 02:48:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 02:48:34 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 02:48:34 LOG5 begin_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2010-Aug-20 02:48:34 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 02:48:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 02:48:34 LOG5 end_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2010-Aug-20 02:48:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 02:48:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 02:48:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 02:48:34 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2010-Aug-20 02:48:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 02:48:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 02:48:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 02:48:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 02:48:34 LOG5 begin_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2010-Aug-20 02:48:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 02:48:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 02:48:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 02:48:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 02:48:34 LOG5 end_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2010-Aug-20 02:48:34 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 02:48:34 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 02:48:34 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2010-Aug-20 02:48:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 02:48:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 02:48:34 INFO2 take_data: Starting WAPP 1-second scan: 23200033 2010-Aug-20 02:48:34 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 02:48:34 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2010-Aug-20 02:48:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 02:48:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 02:48:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24515.00 2010-Aug-20 02:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 02:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 02:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 02:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 02:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:48:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 02:48:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 02:48:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 02:48:36 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2010-Aug-20 02:48:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 02:48:36 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2010-Aug-20 02:48:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 02:48:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 02:48:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 02:48:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 02:48:36 LOG5 begin_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2010-Aug-20 02:48:37 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 02:48:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 02:48:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 02:48:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 02:48:37 LOG5 end_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2010-Aug-20 02:48:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 02:48:37 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 02:48:37 LOG5 finish_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2010-Aug-20 02:48:37 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 02:48:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 02:48:37 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 02:48:37 LOG5 end_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2010-Aug-20 02:48:37 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2010-Aug-20 02:48:37 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2010-Aug-20 02:48:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 02:48:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 02:48:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 02:48:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 02:48:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 02:48:37 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 02:48:37 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 02:48:37 LOG5 begin_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2010-Aug-20 02:48:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 02:48:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 02:48:37 INFO2 take_data: Starting WAPP 600-second scan: 23200034 2010-Aug-20 02:48:37 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 02:48:37 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2010-Aug-20 02:48:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 02:48:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 02:48:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 02:48:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24518.00 2010-Aug-20 02:48:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0016.fits 2010-Aug-20 02:48:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0016.fits} 2010-Aug-20 02:48:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 02:48:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 02:48:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 02:48:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:48:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:48:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 02:48:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:48:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:48:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 02:58:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 02:58:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 02:58:38 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2010-Aug-20 02:58:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 02:58:38 LOG5 end_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2010-Aug-20 02:58:38 LOG1 fixed_driftmap: New position: year = 2010.63552101554 RA = 00:25:04.9 RA/Dec = 00:25:40.4 +22:34:10.9 2010-Aug-20 02:58:38 NOTE fixed_driftmap: Correcting ZA to 4:12:57.2 ... 2010-Aug-20 02:58:38 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2158882147 -CF 2010-Aug-20 02:58:38 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 02:58:38 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 02:58:38 LOG5 begin_task: Level: (2) ID = <10332> Status = 0 0 0 0 ok 2010-Aug-20 02:58:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 02:58:38 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 02:58:38 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2010-Aug-20 02:58:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 02:58:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 02:58:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 02:58:38 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 02:58:38 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2010-Aug-20 02:58:38 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2158882147 -CF 2010-Aug-20 02:58:38 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:58:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 02:58:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 02:58:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:58:39 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 02:58:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 02:58:39 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2010-Aug-20 02:58:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 02:58:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 02:58:39 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 02:58:39 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 02:58:39 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2010-Aug-20 02:58:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 02:58:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 02:58:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 02:58:39 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2010-Aug-20 02:58:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 02:58:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 02:58:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 02:58:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 02:58:39 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 02:58:39 LOG5 begin_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2010-Aug-20 02:58:39 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 02:58:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 02:58:39 LOG5 end_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2010-Aug-20 02:58:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 02:58:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 02:58:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 02:58:39 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2010-Aug-20 02:58:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 02:58:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 02:58:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 02:58:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 02:58:39 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2010-Aug-20 02:58:39 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 02:58:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 02:58:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 02:58:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 02:58:39 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2010-Aug-20 02:58:39 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 02:58:39 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 02:58:39 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Aug-20 02:58:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 02:58:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 02:58:39 INFO2 take_data: Starting WAPP 1-second scan: 23200035 2010-Aug-20 02:58:40 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 02:58:40 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2010-Aug-20 02:58:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 02:58:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 02:58:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25121.00 2010-Aug-20 02:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 02:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 02:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 02:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 02:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 02:58:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 02:58:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 02:58:42 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2010-Aug-20 02:58:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 02:58:42 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Aug-20 02:58:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-20 02:58:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-20 02:58:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-20 02:58:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 02:58:42 LOG5 begin_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2010-Aug-20 02:58:42 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 02:58:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-20 02:58:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 02:58:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 02:58:42 LOG5 end_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2010-Aug-20 02:58:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-20 02:58:42 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-20 02:58:42 LOG5 finish_task: Level: (2) ID = <10332> Status = 0 0 0 0 ok 2010-Aug-20 02:58:42 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-20 02:58:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-20 02:58:42 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-20 02:58:42 LOG5 end_task: Level: (2) ID = <10332> Status = 0 0 0 0 ok 2010-Aug-20 02:58:42 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 20 of 99 2010-Aug-20 02:58:42 LOG4 send_obs_status: To obs_status: <1> LOOP 20 2010-Aug-20 02:58:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Parker Troischt 2010-Aug-20 02:58:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Parker Troischt 2010-Aug-20 02:58:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Parker Troischt 2010-Aug-20 02:58:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Parker Troischt 2010-Aug-20 02:58:43 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-20 02:58:43 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-20 02:58:43 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 02:58:43 LOG5 begin_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2010-Aug-20 02:58:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-20 02:58:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 02:58:43 INFO2 take_data: Starting WAPP 600-second scan: 23200036 2010-Aug-20 02:58:43 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 02:58:43 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2010-Aug-20 02:58:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Parker Troischt' 2010-Aug-20 02:58:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 02:58:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-20 02:58:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25124.00 2010-Aug-20 02:58:43 NOTE WAPPDATA-new_file: New FITS file: wapp.20100820.a2010.0017.fits 2010-Aug-20 02:58:43 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100820.a2010.0017.fits} 2010-Aug-20 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 933.000000 MHz 2010-Aug-20 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2010-Aug-20 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 02:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 825.000000 MHz 2010-Aug-20 03:08:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-20 03:08:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-20 03:08:44 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2010-Aug-20 03:08:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-20 03:08:44 LOG5 end_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2010-Aug-20 03:08:44 LOG1 fixed_driftmap: New position: year = 2010.6355402185211 RA = 00:35:12.4 RA/Dec = 00:35:48.1 +22:34:09.4 2010-Aug-20 03:08:44 NOTE fixed_driftmap: Correcting ZA to 4:12:55.7 ... 2010-Aug-20 03:08:44 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 4.2154844032 -CF 2010-Aug-20 03:08:44 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-20 03:08:44 START begin_task: Starting task 'WAPP calibration' 2010-Aug-20 03:08:44 LOG5 begin_task: Level: (2) ID = <10343> Status = 0 0 0 0 ok 2010-Aug-20 03:08:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-20 03:08:44 START begin_task: Starting task 'selecting calibration type' 2010-Aug-20 03:08:44 LOG5 begin_task: Level: (3) ID = <10344> Status = 0 0 0 0 ok 2010-Aug-20 03:08:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-20 03:08:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-20 03:08:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 03:08:44 START begin_task: Starting task 'waiting on setcal' 2010-Aug-20 03:08:44 LOG5 begin_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2010-Aug-20 03:08:44 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 4.2154844032 -CF 2010-Aug-20 03:08:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 03:08:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-20 03:08:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-20 03:08:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 03:08:44 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-20 03:08:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-20 03:08:44 LOG5 end_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2010-Aug-20 03:08:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-20 03:08:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 03:08:44 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-20 03:08:44 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 03:08:44 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2010-Aug-20 03:08:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-20 03:08:45 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 03:08:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 03:08:45 LOG5 end_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2010-Aug-20 03:08:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 03:08:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-20 03:08:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-20 03:08:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-20 03:08:45 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-20 03:08:45 LOG5 begin_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2010-Aug-20 03:08:45 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-20 03:08:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-20 03:08:45 LOG5 end_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2010-Aug-20 03:08:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-20 03:08:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-20 03:08:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-20 03:08:45 LOG5 end_task: Level: (3) ID = <10344> Status = 0 0 0 0 ok 2010-Aug-20 03:08:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-20 03:08:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-20 03:08:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-20 03:08:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-20 03:08:45 LOG5 begin_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2010-Aug-20 03:08:45 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-20 03:08:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-20 03:08:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-20 03:08:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-20 03:08:45 LOG5 end_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2010-Aug-20 03:08:45 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-20 03:08:45 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-20 03:08:45 LOG5 begin_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2010-Aug-20 03:08:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-20 03:08:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-20 03:08:45 INFO2 take_data: Starting WAPP 1-second scan: 23200037 2010-Aug-20 03:08:45 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-20 03:08:45 LOG5 begin_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2010-Aug-20 03:08:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-20 03:08:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-20 03:08:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25726.00 2010-Aug-20 03:08:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-20 03:08:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 761.000000 MHz 2010-Aug-20 03:08:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2288.000000 MHz 2010-Aug-20 03:08:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1962.000000 MHz 2010-Aug-20 03:08:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2