2010-Aug-17 23:40:34 BEGIN executive: CIMA executive starting ... 2010-Aug-17 23:40:34 NOTE executive: STARTING NEW CIMA SESSION 2010-Aug-17 23:40:34 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-Aug-17 23:40:34 INFO4 executive: This is an ON-LINE session 2010-Aug-17 23:40:34 INFO4 executive: This is a LOCAL session 2010-Aug-17 23:40:34 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-Aug-17 23:40:34 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Becky Koopmann' 2010-Aug-17 23:40:34 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20100817' 2010-Aug-17 23:40:34 LOG2 log_preferences: Currently applied preferences: 2010-Aug-17 23:40:34 LOG2 log_preferences: prefs(dailylog) = daily 2010-Aug-17 23:40:34 LOG2 log_preferences: prefs(offlinelog) = skip 2010-Aug-17 23:40:34 LOG2 log_preferences: prefs(datawindow) = open 2010-Aug-17 23:40:34 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-Aug-17 23:40:34 LOG2 log_preferences: prefs(wappfailure) = abort 2010-Aug-17 23:40:34 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-Aug-17 23:40:34 LOG2 log_preferences: prefs(logcolours) = full 2010-Aug-17 23:40:34 LOG2 log_preferences: prefs(displaylevel) = INFO5 2010-Aug-17 23:40:34 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-Aug-17 23:40:34 LOG2 log_preferences: prefs(displayformat) = long 2010-Aug-17 23:40:34 LOG2 log_preferences: prefs(logformat) = new 2010-Aug-17 23:40:34 LOG2 log_preferences: prefs(fontsize) = 3 2010-Aug-17 23:40:34 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-Aug-17 23:40:34 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2010-Aug-17 23:40:34 ALERT executive: CIMA executive ready 2010-Aug-17 23:40:36 NOTE frontend: CIMA frontend ready 2010-Aug-17 23:40:37 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2010-Aug-17 23:40:37 LOG4 got_cormsg: From DATATAKING: vw% setup 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0x300002 2010-Aug-17 23:40:42 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0x300002' 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: vw% io 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: tape stat 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-Aug-17 23:40:42 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:40:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:00 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-Aug-17 23:41:00 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-Aug-17 23:41:00 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-Aug-17 23:41:00 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-Aug-17 23:41:00 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-17 23:41:00 NOTE select_receiver: Starting to select receiver ALFA 2010-Aug-17 23:41:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Aug-17 23:41:00 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Aug-17 23:41:00 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Aug-17 23:41:01 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Aug-17 23:41:01 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Aug-17 23:41:01 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-17 23:41:01 DONE finish_task: DONE finished selecting: receiver ALFA 2010-Aug-17 23:41:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-17 23:41:01 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Aug-17 23:41:01 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Aug-17 23:41:01 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Aug-17 23:41:01 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Aug-17 23:41:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:10 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Aug-17 23:41:10 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Aug-17 23:41:10 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Aug-17 23:41:10 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Aug-17 23:41:10 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Aug-17 23:41:10 NOTE restart_wapp: Restarting all WAPPs 2010-Aug-17 23:41:10 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Aug-17 23:41:10 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Aug-17 23:41:10 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Aug-17 23:41:10 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-17 23:41:13 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Aug-17 23:41:13 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Aug-17 23:41:13 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Aug-17 23:41:13 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Aug-17 23:41:33 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc_aug10.cmd' 2010-Aug-17 23:41:37 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc_aug10.cmd' to executive ... 2010-Aug-17 23:41:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_10.conf} 2010-Aug-17 23:41:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {CATALOG galfa_togs.cat} 2010-Aug-17 23:41:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {SEEK galfasrc} 2010-Aug-17 23:41:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 10 {TRACKCURPOS} 2010-Aug-17 23:41:37 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 11 {ALFAANGLE 19.} 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {WAITTRACK} 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2010-Aug-17 23:41:38 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc_aug10.cmd 1 1 7 2010-Aug-17 23:41:38 LOG4 run_command_file: Calling 'run_command_file command_galfasrc_aug10.cmd 1 1 7' 2010-Aug-17 23:41:38 BEGIN begin_task: Starting task 'running command file 'command_galfasrc_aug10.cmd'' 2010-Aug-17 23:41:38 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-17 23:41:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc_aug10.cmd' ...} 2010-Aug-17 23:41:38 NOTE run_command_file: Starting execution of command file 'command_galfasrc_aug10.cmd' from line 1 2010-Aug-17 23:41:38 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_10.conf' 2010-Aug-17 23:41:38 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-17 23:41:38 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-Aug-17 23:41:38 NOTE CIMA-load_config_file: Loading configuration file 'togs_10.conf' 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Aug-17 23:41:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-17 23:41:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-17 23:41:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Aug-17 23:41:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Aug-17 23:41:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Aug-17 23:41:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Aug-17 23:41:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Aug-17 23:41:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Aug-17 23:41:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Aug-17 23:41:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Aug-17 23:41:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-17 23:41:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-17 23:41:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-17 23:41:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-17 23:41:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Aug-17 23:41:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Aug-17 23:41:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Aug-17 23:41:40 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-17 23:41:40 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Aug-17 23:41:40 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-17 23:41:40 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Aug-17 23:41:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Aug-17 23:41:40 INFO1 config_iflo: Selecting receiver ALFA 2010-Aug-17 23:41:40 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-Aug-17 23:41:40 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2010-Aug-17 23:41:40 START begin_task: Starting task 'selecting receiver ALFA' 2010-Aug-17 23:41:40 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-17 23:41:40 NOTE select_receiver: Starting to select receiver ALFA 2010-Aug-17 23:41:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Aug-17 23:41:40 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Aug-17 23:41:40 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Aug-17 23:41:40 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Aug-17 23:41:40 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Aug-17 23:41:40 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-17 23:41:40 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-Aug-17 23:41:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:41:40 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Aug-17 23:41:40 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2010-Aug-17 23:41:40 START begin_task: Starting task 'waiting for receiver ALFA' 2010-Aug-17 23:41:40 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Aug-17 23:41:40 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-Aug-17 23:41:40 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2010-Aug-17 23:41:40 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-Aug-17 23:41:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-Aug-17 23:41:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-17 23:41:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-17 23:41:40 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-17 23:41:40 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Aug-17 23:41:40 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-17 23:41:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-17 23:41:40 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2010-Aug-17 23:41:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-17 23:41:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-17 23:41:40 LOG3 vw_send: To DATATAKING: alfafb 1 2010-Aug-17 23:41:40 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-Aug-17 23:41:40 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Aug-17 23:41:40 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Aug-17 23:41:40 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-Aug-17 23:41:40 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-Aug-17 23:41:40 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-Aug-17 23:41:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-17 23:41:40 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-Aug-17 23:41:40 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-Aug-17 23:41:40 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Aug-17 23:41:40 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Aug-17 23:41:40 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Aug-17 23:41:40 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Aug-17 23:41:40 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Aug-17 23:41:40 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-Aug-17 23:41:40 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-Aug-17 23:41:41 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-Aug-17 23:41:41 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-Aug-17 23:41:41 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Aug-17 23:41:41 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-Aug-17 23:41:41 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Aug-17 23:41:41 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Aug-17 23:41:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:41:41 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Aug-17 23:41:41 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-Aug-17 23:41:41 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Aug-17 23:41:41 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-Aug-17 23:41:41 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-Aug-17 23:41:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Aug-17 23:41:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:41:41 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Aug-17 23:41:41 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-Aug-17 23:41:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:41:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:56 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-17 23:41:56 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Aug-17 23:41:56 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2010-Aug-17 23:41:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Aug-17 23:41:56 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Aug-17 23:41:56 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-17 23:41:56 DONE finish_task: DONE finished configuration: IF/LO path 2010-Aug-17 23:41:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-17 23:41:57 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Aug-17 23:41:57 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Aug-17 23:41:57 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Aug-17 23:41:57 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-17 23:41:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Aug-17 23:41:57 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Aug-17 23:41:57 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Aug-17 23:41:57 START begin_task: Starting task 'selecting calibration port' 2010-Aug-17 23:41:57 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Aug-17 23:41:57 LOG3 vw_send: To DATATAKING: calport 3 2010-Aug-17 23:41:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Aug-17 23:41:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:41:57 START begin_task: Starting task 'waiting on calport' 2010-Aug-17 23:41:57 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-Aug-17 23:41:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:57 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Aug-17 23:41:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:41:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:57 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-17 23:41:57 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Aug-17 23:41:57 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2010-Aug-17 23:41:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Aug-17 23:41:57 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Aug-17 23:41:57 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Aug-17 23:41:57 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-17 23:41:57 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-17 23:41:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-17 23:41:57 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Aug-17 23:41:57 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-17 23:41:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-17 23:41:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-17 23:41:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-17 23:41:57 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2010-Aug-17 23:41:57 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Aug-17 23:41:57 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Aug-17 23:41:57 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Aug-17 23:41:57 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Aug-17 23:41:57 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Aug-17 23:41:57 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Aug-17 23:41:57 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Aug-17 23:41:57 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Aug-17 23:41:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:41:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:41:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:41:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:41:57 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Aug-17 23:41:57 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Aug-17 23:41:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-17 23:41:57 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Aug-17 23:41:57 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-17 23:41:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-17 23:41:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-17 23:41:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-17 23:41:58 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2010-Aug-17 23:41:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:41:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:41:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:41:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:41:58 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Aug-17 23:41:58 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-17 23:41:58 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Aug-17 23:41:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-17 23:41:58 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Aug-17 23:41:58 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Aug-17 23:41:58 COMMAND run_command_line: EXECUTING command 8: 'CATALOG galfa_togs.cat' 2010-Aug-17 23:41:58 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/galfa_togs.cat' 2010-Aug-17 23:41:58 COMMAND run_command_line: EXECUTING command 9: 'SEEK galfasrc' 2010-Aug-17 23:41:58 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/galfa_togs.cat galfasrc nooffset wait' 2010-Aug-17 23:41:58 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2010-Aug-17 23:41:58 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-17 23:41:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2010-Aug-17 23:41:58 LOG3 track_source: Calling 'track_source galfasrc 180.0 4. F 0.0 0.0 main small /share/obs4/usr/a2010/galfa_togs.cat 0 Topocentric velocity(optical)' 2010-Aug-17 23:41:58 START begin_task: Starting task 'sending tracking commands' 2010-Aug-17 23:41:58 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-17 23:41:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2010-Aug-17 23:41:58 INFO1 track_source: Starting to track galfasrc 2010-Aug-17 23:41:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2010-Aug-17 23:41:58 LOG3 vw_send: To DATATAKING: set ra 180.0 2010-Aug-17 23:41:58 LOG3 vw_send: To DATATAKING: set dec 4. 2010-Aug-17 23:41:58 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-17 23:41:58 LOG3 vw_send: To DATATAKING: pnt tr 180.0 4. -CF 2010-Aug-17 23:41:58 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-17 23:41:58 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-17 23:41:58 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-17 23:41:58 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-17 23:41:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:41:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-17 23:41:58 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2010-Aug-17 23:41:58 START begin_task: Starting task 'waiting on telescope' 2010-Aug-17 23:41:58 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-17 23:41:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-17 23:41:58 LOG3 waittrk: Start waittrk 5 2010-Aug-17 23:41:58 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-17 23:41:58 LOG5 begin_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2010-Aug-17 23:41:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-17 23:41:59 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2010-Aug-17 23:41:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Aug-17 23:41:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Aug-17 23:41:59 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2010-Aug-17 23:41:59 LOG4 got_cormsg: From DATATAKING: set dec 4. 2010-Aug-17 23:41:59 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2010-Aug-17 23:41:59 LOG4 got_cormsg: From DATATAKING: vw% 4. 2010-Aug-17 23:41:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:59 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-17 23:41:59 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 4. -CF 2010-Aug-17 23:41:59 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-17 23:41:59 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-17 23:41:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:41:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20100817.a2010.0000.fits 2010-Aug-17 23:41:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100817.a2010.0000.fits} 2010-Aug-17 23:41:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-17 23:42:04 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-17 23:42:04 LOG5 end_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2010-Aug-17 23:42:04 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-17 23:42:04 LOG5 begin_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2010-Aug-17 23:42:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-17 23:42:11 LOG5 end_task: Level: (4) ID = <10018> Status = 0 0 0 0 ok 2010-Aug-17 23:42:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-17 23:42:11 INFO2 waittrk: Now tracking galfasrc 2010-Aug-17 23:42:11 LOG4 waittrk: Current telescope position: Az = 179.73 ZA = 4.02 2010-Aug-17 23:42:11 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-17 23:42:11 LOG5 finish_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-17 23:42:11 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-17 23:42:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:42:11 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-17 23:42:11 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2010-Aug-17 23:42:11 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2010-Aug-17 23:42:11 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-17 23:42:11 DONE finish_task: DONE finished tracking: source 'galfasrc' 2010-Aug-17 23:42:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-17 23:42:11 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2010-Aug-17 23:42:11 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2010-Aug-17 23:42:11 COMMAND run_command_line: EXECUTING command 10: 'TRACKCURPOS' 2010-Aug-17 23:42:11 BEGIN begin_task: Starting task 'tracking current position' 2010-Aug-17 23:42:11 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-17 23:42:11 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2010-Aug-17 23:42:11 INFO1 track_current_pos: Starting to track the current commanded position RA = 21:00:16.2 and Dec = +22:18:32.3 2010-Aug-17 23:42:11 LOG3 track_source: Calling 'track_source Cur-pos 210016.2 221832.3 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-Aug-17 23:42:11 START begin_task: Starting task 'sending tracking commands' 2010-Aug-17 23:42:11 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-17 23:42:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2010-Aug-17 23:42:11 INFO1 track_source: Starting to track Cur-pos 2010-Aug-17 23:42:11 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2010-Aug-17 23:42:11 LOG3 vw_send: To DATATAKING: set ra 210016.2 2010-Aug-17 23:42:11 LOG3 vw_send: To DATATAKING: set dec 221832.3 2010-Aug-17 23:42:11 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-17 23:42:11 LOG3 vw_send: To DATATAKING: pnt tr 210016.2 221832.3 -CJ 2010-Aug-17 23:42:11 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-17 23:42:11 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-17 23:42:11 LOG5 finish_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-17 23:42:11 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-17 23:42:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:42:11 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-17 23:42:11 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2010-Aug-17 23:42:11 START begin_task: Starting task 'waiting on telescope' 2010-Aug-17 23:42:11 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-17 23:42:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-17 23:42:11 LOG3 waittrk: Start waittrk 5 2010-Aug-17 23:42:11 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-17 23:42:11 LOG5 begin_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2010-Aug-17 23:42:11 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2010-Aug-17 23:42:11 LOG4 got_cormsg: From DATATAKING: set ra 210016.2 2010-Aug-17 23:42:11 LOG4 got_cormsg: From DATATAKING: set dec 221832.3 2010-Aug-17 23:42:11 LOG4 got_cormsg: From DATATAKING: vw% 210016.2 2010-Aug-17 23:42:11 LOG4 got_cormsg: From DATATAKING: vw% 221832.3 2010-Aug-17 23:42:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:42:11 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-17 23:42:11 LOG4 got_cormsg: From DATATAKING: pnt tr 210016.2 221832.3 -CJ 2010-Aug-17 23:42:11 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-17 23:42:11 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-17 23:42:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:42:16 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-17 23:42:16 LOG5 end_task: Level: (4) ID = <10022> Status = 0 0 0 0 ok 2010-Aug-17 23:42:16 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-17 23:42:16 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Aug-17 23:42:24 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-17 23:42:24 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2010-Aug-17 23:42:24 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-17 23:42:24 INFO2 waittrk: Now tracking Cur-pos 2010-Aug-17 23:42:24 LOG4 waittrk: Current telescope position: Az = 179.02 ZA = 4.02 2010-Aug-17 23:42:24 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-17 23:42:24 LOG5 finish_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-17 23:42:24 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-17 23:42:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:42:24 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-17 23:42:24 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Aug-17 23:42:24 STOP finish_task: Finishing task 'tracking current position' 2010-Aug-17 23:42:24 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-17 23:42:24 DONE finish_task: DONE finished tracking: current position 2010-Aug-17 23:42:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-17 23:42:24 END end_task: Finishing task 'tracking current position' with status 'OK' 2010-Aug-17 23:42:24 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Aug-17 23:42:24 COMMAND run_command_line: EXECUTING command 11: 'ALFAANGLE 19.' 2010-Aug-17 23:42:24 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19. 2010-Aug-17 23:42:24 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-17 23:42:24 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-17 23:42:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-17 23:42:24 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-17 23:42:24 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19. REPLY 2010-Aug-17 23:42:24 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Aug-17 23:42:24 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Aug-17 23:42:24 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Aug-17 23:43:17 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-17 23:43:17 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-17 23:43:17 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Aug-17 23:43:17 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2010-Aug-17 23:43:18 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Aug-17 23:43:18 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-17 23:43:18 LOG5 finish_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-17 23:43:18 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-17 23:43:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-17 23:43:18 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-17 23:43:18 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2010-Aug-17 23:43:18 COMMAND run_command_line: EXECUTING command 12: 'WAITTRACK' 2010-Aug-17 23:43:18 BEGIN begin_task: Starting task 'waiting on telescope' 2010-Aug-17 23:43:18 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-17 23:43:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-17 23:43:18 LOG3 waittrk: Start waittrk 5 2010-Aug-17 23:43:18 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-17 23:43:18 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Aug-17 23:43:23 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-17 23:43:23 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Aug-17 23:43:23 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-17 23:43:23 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Aug-17 23:43:23 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-17 23:43:23 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Aug-17 23:43:23 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Aug-17 23:43:23 INFO2 waittrk: Now tracking Cur-pos 2010-Aug-17 23:43:23 LOG4 waittrk: Current telescope position: Az = 175.70 ZA = 4.03 2010-Aug-17 23:43:23 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-17 23:43:23 LOG5 finish_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-17 23:43:23 DONE finish_task: DONE finished waiting: telescope on source 2010-Aug-17 23:43:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-17 23:43:23 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-17 23:43:23 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2010-Aug-17 23:43:23 COMMAND run_command_line: EXECUTING command 16: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-Aug-17 23:43:23 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-Aug-17 23:43:23 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-Aug-17 23:43:23 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-Aug-17 23:43:23 BEGIN begin_task: Starting task 'smart frequency switching' 2010-Aug-17 23:43:23 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-17 23:43:23 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2010-Aug-17 23:43:24 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-Aug-17 23:43:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-Aug-17 23:43:24 START begin_task: Starting task 'selecting calibration type' 2010-Aug-17 23:43:24 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Aug-17 23:43:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-17 23:43:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-17 23:43:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:43:24 START begin_task: Starting task 'waiting on setcal' 2010-Aug-17 23:43:24 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2010-Aug-17 23:43:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-17 23:43:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:43:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:43:24 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-17 23:43:24 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-17 23:43:24 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2010-Aug-17 23:43:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-17 23:43:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-17 23:43:24 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-17 23:43:24 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-17 23:43:24 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Aug-17 23:43:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:43:25 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-17 23:43:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-17 23:43:25 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Aug-17 23:43:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-17 23:43:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-17 23:43:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-17 23:43:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-17 23:43:25 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-17 23:43:25 LOG5 begin_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-Aug-17 23:43:25 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-17 23:43:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-17 23:43:25 LOG5 end_task: Level: (4) ID = <10033> Status = 0 0 0 0 ok 2010-Aug-17 23:43:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-17 23:43:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-17 23:43:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-17 23:43:25 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Aug-17 23:43:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:43:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:43:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:43:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:43:25 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20100817.a2010.0000.fits' is empty! 2010-Aug-17 23:43:25 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-Aug-17 23:43:25 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Aug-17 23:43:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Aug-17 23:43:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-17 23:43:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-17 23:43:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-17 23:43:25 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Aug-17 23:43:25 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-17 23:43:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-17 23:43:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-17 23:43:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-17 23:43:25 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2010-Aug-17 23:43:25 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Aug-17 23:43:25 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-17 23:43:25 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-17 23:43:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Aug-17 23:43:25 INFO2 adjust_power: Starting to adjust WAPP power 2010-Aug-17 23:43:26 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Aug-17 23:43:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Aug-17 23:43:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:43:26 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Aug-17 23:43:26 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Aug-17 23:43:26 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Aug-17 23:43:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:43:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-17 23:43:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:43:29 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-17 23:43:29 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Aug-17 23:43:29 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2010-Aug-17 23:43:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Aug-17 23:43:29 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-17 23:43:29 LOG5 begin_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-17 23:43:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Aug-17 23:43:29 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-17 23:43:29 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-17 23:43:29 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-17 23:43:29 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-17 23:43:29 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Aug-17 23:43:29 LOG5 begin_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2010-Aug-17 23:43:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Aug-17 23:43:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:43:29 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Aug-17 23:43:29 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 0 dB --- beam 5: 4 5 dB 2010-Aug-17 23:43:29 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 3 3 dB 2010-Aug-17 23:43:29 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Aug-17 23:43:29 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Aug-17 23:43:29 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Aug-17 23:43:29 LOG5 end_task: Level: (5) ID = <10038> Status = 0 0 0 0 ok 2010-Aug-17 23:43:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.882 0.959 ALFA beam 1: 0.961 1.011 2010-Aug-17 23:43:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.983 0.924 ALFA beam 3: 1.070 0.975 2010-Aug-17 23:43:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.877 0.879 ALFA beam 5: 1.102 1.107 2010-Aug-17 23:43:29 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.909 0.859 ALFA beam 7: 1.002 1.018 2010-Aug-17 23:43:29 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-17 23:43:29 LOG5 finish_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-17 23:43:29 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Aug-17 23:43:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:43:30 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-17 23:43:30 LOG5 end_task: Level: (4) ID = <10037> Status = 0 0 0 0 ok 2010-Aug-17 23:43:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-17 23:43:30 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-17 23:43:30 LOG5 finish_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-17 23:43:30 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Aug-17 23:43:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:43:30 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-17 23:43:30 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Aug-17 23:43:30 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-Aug-17 23:43:30 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-17 23:43:30 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-17 23:43:30 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:43:30 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62967 J 2010-Aug-17 23:43:30 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:43:30 LOG2 antvel: Parameters to Doppler: Topocentric 99809 2010 229 0.0 2010-Aug-17 23:43:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:43:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-17 23:43:30 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-17 23:43:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:43:30 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:43:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-17 23:43:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:43:30 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-Aug-17 23:43:30 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:43:30 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Aug-17 23:43:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-17 23:43:30 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.034759 2010.6296742781453 18.999933 2010-Aug-17 23:43:30 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000142 22.308972222222220 2010-Aug-17 23:43:30 LOG4 log_alfabeam: ALFABEAM 1 21.006311769993051 22.205882602782502 2010-Aug-17 23:43:30 LOG4 log_alfabeam: ALFABEAM 2 21.010854923755247 22.280134018104270 2010-Aug-17 23:43:30 LOG4 log_alfabeam: ALFABEAM 3 21.009151619166751 22.383633285015041 2010-Aug-17 23:43:30 LOG4 log_alfabeam: ALFABEAM 4 21.002620600599307 22.411910196656589 2010-Aug-17 23:43:30 LOG4 log_alfabeam: ALFABEAM 5 20.998045682751606 22.335782352570632 2010-Aug-17 23:43:30 LOG4 log_alfabeam: ALFABEAM 6 21.000032699549191 22.233290006035787 2010-Aug-17 23:43:30 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900078 2010-Aug-17 23:43:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:43:30 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Aug-17 23:43:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:43:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-17 23:43:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:43:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:43:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:43:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-17 23:43:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13411.00 2010-Aug-17 23:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:43:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:43:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:43:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:43:41 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Aug-17 23:43:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:43:41 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2010-Aug-17 23:43:41 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-Aug-17 23:43:41 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-17 23:43:41 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-17 23:43:41 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:43:41 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62967 J 2010-Aug-17 23:43:41 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:43:41 LOG2 antvel: Parameters to Doppler: Topocentric 99821 2010 229 0.0 2010-Aug-17 23:43:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:43:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-17 23:43:41 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-17 23:43:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:43:41 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:43:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-17 23:43:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:43:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-Aug-17 23:43:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:43:41 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Aug-17 23:43:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-17 23:43:41 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.038102 2010.6296746584026 18.999933 2010-Aug-17 23:43:41 LOG4 log_alfabeam: ALFABEAM 0 21.004499999999975 22.308972222222216 2010-Aug-17 23:43:41 LOG4 log_alfabeam: ALFABEAM 1 21.006399517866669 22.206187407190313 2010-Aug-17 23:43:41 LOG4 log_alfabeam: ALFABEAM 2 21.010879136358636 22.281180564980861 2010-Aug-17 23:43:41 LOG4 log_alfabeam: ALFABEAM 3 21.009087518875809 22.384392408396678 2010-Aug-17 23:43:41 LOG4 log_alfabeam: ALFABEAM 4 21.002532925760590 22.411594442691118 2010-Aug-17 23:43:41 LOG4 log_alfabeam: ALFABEAM 5 20.998023339765286 22.334721592679831 2010-Aug-17 23:43:41 LOG4 log_alfabeam: ALFABEAM 6 21.000097434017491 22.232562169376898 2010-Aug-17 23:43:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900079 2010-Aug-17 23:43:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:43:42 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-Aug-17 23:43:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:43:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-17 23:43:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:43:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:43:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:43:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-17 23:43:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13423.00 2010-Aug-17 23:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:43:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:43:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:43:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:43:53 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2010-Aug-17 23:43:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:43:53 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Aug-17 23:43:53 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-Aug-17 23:43:53 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-17 23:43:53 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-17 23:43:53 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:43:53 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:43:53 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:43:53 LOG2 antvel: Parameters to Doppler: Topocentric 99833 2010 229 0.0 2010-Aug-17 23:43:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:43:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-17 23:43:53 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-17 23:43:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:43:53 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:43:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-17 23:43:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:43:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-Aug-17 23:43:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:43:53 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Aug-17 23:43:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-17 23:43:53 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.041444 2010.6296750386596 18.999933 2010-Aug-17 23:43:53 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000043 22.308972222222227 2010-Aug-17 23:43:53 LOG4 log_alfabeam: ALFABEAM 1 21.006486797268082 22.206505841347646 2010-Aug-17 23:43:53 LOG4 log_alfabeam: ALFABEAM 2 21.010902406795854 22.282228658687270 2010-Aug-17 23:43:53 LOG4 log_alfabeam: ALFABEAM 3 21.009022916463053 22.385139240117930 2010-Aug-17 23:43:53 LOG4 log_alfabeam: ALFABEAM 4 21.002445738370760 22.411265131133689 2010-Aug-17 23:43:53 LOG4 log_alfabeam: ALFABEAM 5 20.998001958528320 22.333659914507514 2010-Aug-17 23:43:53 LOG4 log_alfabeam: ALFABEAM 6 21.000162614992806 22.231846749366245 2010-Aug-17 23:43:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900080 2010-Aug-17 23:43:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:43:54 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-Aug-17 23:43:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:43:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-17 23:43:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:43:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:43:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:43:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-17 23:43:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13435.00 2010-Aug-17 23:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:43:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:44:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:44:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:44:05 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2010-Aug-17 23:44:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:44:05 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2010-Aug-17 23:44:05 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-Aug-17 23:44:05 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-17 23:44:05 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-17 23:44:05 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:44:05 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:44:05 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:44:05 LOG2 antvel: Parameters to Doppler: Topocentric 99845 2010 229 0.0 2010-Aug-17 23:44:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:44:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-17 23:44:05 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-17 23:44:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:44:05 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:44:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-17 23:44:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:44:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-Aug-17 23:44:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:44:05 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Aug-17 23:44:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-17 23:44:05 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.044787 2010.6296754189166 18.999933 2010-Aug-17 23:44:05 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000061 22.308972222222216 2010-Aug-17 23:44:05 LOG4 log_alfabeam: ALFABEAM 1 21.006573627277437 22.206837875786455 2010-Aug-17 23:44:05 LOG4 log_alfabeam: ALFABEAM 2 21.010924745177970 22.283278484005692 2010-Aug-17 23:44:05 LOG4 log_alfabeam: ALFABEAM 3 21.008957803277148 22.385873991927230 2010-Aug-17 23:44:05 LOG4 log_alfabeam: ALFABEAM 4 21.002359019203329 22.410922293409445 2010-Aug-17 23:44:05 LOG4 log_alfabeam: ALFABEAM 5 20.997981528373973 22.332597132116060 2010-Aug-17 23:44:05 LOG4 log_alfabeam: ALFABEAM 6 21.000228251368402 22.231143526377011 2010-Aug-17 23:44:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900081 2010-Aug-17 23:44:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:44:06 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-Aug-17 23:44:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:44:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-17 23:44:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:44:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:44:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:44:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-17 23:44:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13447.00 2010-Aug-17 23:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:44:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:44:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:44:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:44:17 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2010-Aug-17 23:44:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:44:17 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2010-Aug-17 23:44:17 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-Aug-17 23:44:17 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-17 23:44:17 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-17 23:44:17 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:44:17 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:44:17 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:44:17 LOG2 antvel: Parameters to Doppler: Topocentric 99857 2010 229 0.0 2010-Aug-17 23:44:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:44:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-17 23:44:17 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-17 23:44:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:44:17 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:44:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-17 23:44:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:44:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-Aug-17 23:44:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:44:17 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-Aug-17 23:44:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-17 23:44:17 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.048129 2010.6296757991736 18.999933 2010-Aug-17 23:44:17 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000032 22.308972222222216 2010-Aug-17 23:44:17 LOG4 log_alfabeam: ALFABEAM 1 21.006659923617441 22.207183077226528 2010-Aug-17 23:44:17 LOG4 log_alfabeam: ALFABEAM 2 21.010946135483696 22.284328971945506 2010-Aug-17 23:44:17 LOG4 log_alfabeam: ALFABEAM 3 21.008892248657592 22.386596005665130 2010-Aug-17 23:44:17 LOG4 log_alfabeam: ALFABEAM 4 21.002272852239248 22.410566377518808 2010-Aug-17 23:44:17 LOG4 log_alfabeam: ALFABEAM 5 20.997962062483580 22.331534328122334 2010-Aug-17 23:44:17 LOG4 log_alfabeam: ALFABEAM 6 21.000294273479614 22.230453113116159 2010-Aug-17 23:44:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900082 2010-Aug-17 23:44:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:44:18 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Aug-17 23:44:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:44:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-17 23:44:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:44:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:44:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:44:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-17 23:44:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13459.00 2010-Aug-17 23:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:44:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:44:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:44:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:44:29 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2010-Aug-17 23:44:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:44:29 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2010-Aug-17 23:44:29 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-Aug-17 23:44:29 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-17 23:44:29 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-17 23:44:29 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:44:29 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:44:29 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:44:29 LOG2 antvel: Parameters to Doppler: Topocentric 99869 2010 229 0.0 2010-Aug-17 23:44:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:44:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-17 23:44:29 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-17 23:44:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:44:29 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:44:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-17 23:44:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:44:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-Aug-17 23:44:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:44:29 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Aug-17 23:44:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-17 23:44:29 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.051471 2010.6296761794306 18.999933 2010-Aug-17 23:44:29 LOG4 log_alfabeam: ALFABEAM 0 21.004499999999986 22.308972222222209 2010-Aug-17 23:44:29 LOG4 log_alfabeam: ALFABEAM 1 21.006745680877241 22.207541294378803 2010-Aug-17 23:44:29 LOG4 log_alfabeam: ALFABEAM 2 21.010966583025674 22.285379997784634 2010-Aug-17 23:44:29 LOG4 log_alfabeam: ALFABEAM 3 21.008826263894960 22.387305301205121 2010-Aug-17 23:44:29 LOG4 log_alfabeam: ALFABEAM 4 21.002187242661819 22.410197539536071 2010-Aug-17 23:44:29 LOG4 log_alfabeam: ALFABEAM 5 20.997943554404383 22.330471628052116 2010-Aug-17 23:44:29 LOG4 log_alfabeam: ALFABEAM 6 21.000360670278621 22.229775472690729 2010-Aug-17 23:44:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900083 2010-Aug-17 23:44:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:44:30 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Aug-17 23:44:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:44:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-17 23:44:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:44:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:44:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:44:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-17 23:44:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13471.00 2010-Aug-17 23:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:44:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:44:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:44:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:44:41 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Aug-17 23:44:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:44:41 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2010-Aug-17 23:44:41 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-Aug-17 23:44:41 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-17 23:44:41 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-17 23:44:41 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:44:41 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:44:41 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:44:41 LOG2 antvel: Parameters to Doppler: Topocentric 99881 2010 229 0.0 2010-Aug-17 23:44:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:44:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-17 23:44:41 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-17 23:44:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:44:41 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:44:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-17 23:44:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:44:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-Aug-17 23:44:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:44:41 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Aug-17 23:44:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-17 23:44:41 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.054814 2010.6296765596878 18.999933 2010-Aug-17 23:44:41 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000046 22.308972222222216 2010-Aug-17 23:44:41 LOG4 log_alfabeam: ALFABEAM 1 21.006830893919087 22.207912378199186 2010-Aug-17 23:44:41 LOG4 log_alfabeam: ALFABEAM 2 21.010986093124284 22.286431440553439 2010-Aug-17 23:44:41 LOG4 log_alfabeam: ALFABEAM 3 21.008759860017229 22.388001900164767 2010-Aug-17 23:44:41 LOG4 log_alfabeam: ALFABEAM 4 21.002102195377159 22.409815933157958 2010-Aug-17 23:44:41 LOG4 log_alfabeam: ALFABEAM 5 20.997925997689944 22.329409153350095 2010-Aug-17 23:44:41 LOG4 log_alfabeam: ALFABEAM 6 21.000427431003406 22.229110566745980 2010-Aug-17 23:44:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900084 2010-Aug-17 23:44:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:44:42 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-Aug-17 23:44:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:44:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-17 23:44:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:44:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:44:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:44:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-17 23:44:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13483.00 2010-Aug-17 23:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:44:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:44:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:44:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:44:53 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2010-Aug-17 23:44:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:44:53 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2010-Aug-17 23:44:53 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Aug-17 23:44:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-17 23:44:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-17 23:44:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-17 23:44:53 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Aug-17 23:44:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-17 23:44:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-17 23:44:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-17 23:44:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-17 23:44:53 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Aug-17 23:44:53 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-Aug-17 23:44:53 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-17 23:44:53 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-17 23:44:53 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:44:53 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:44:53 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:44:53 LOG2 antvel: Parameters to Doppler: Topocentric 99893 2010 229 0.0 2010-Aug-17 23:44:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:44:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-17 23:44:53 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-17 23:44:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:44:53 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:44:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-17 23:44:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:44:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-Aug-17 23:44:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:44:53 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Aug-17 23:44:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-Aug-17 23:44:53 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.058156 2010.6296769399448 18.999933 2010-Aug-17 23:44:53 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000007 22.308972222222220 2010-Aug-17 23:44:53 LOG4 log_alfabeam: ALFABEAM 1 21.006915482182187 22.208295832089750 2010-Aug-17 23:44:53 LOG4 log_alfabeam: ALFABEAM 2 21.011004654851892 22.287482239593185 2010-Aug-17 23:44:53 LOG4 log_alfabeam: ALFABEAM 3 21.008693107892064 22.388685218035270 2010-Aug-17 23:44:53 LOG4 log_alfabeam: ALFABEAM 4 21.002017790536211 22.409422068801781 2010-Aug-17 23:44:53 LOG4 log_alfabeam: ALFABEAM 5 20.997909400385986 22.328347973863750 2010-Aug-17 23:44:53 LOG4 log_alfabeam: ALFABEAM 6 21.000494484827342 22.228458934888089 2010-Aug-17 23:44:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900085 2010-Aug-17 23:44:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:44:54 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-Aug-17 23:44:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:44:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-17 23:44:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:44:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:44:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:44:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-17 23:44:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13495.00 2010-Aug-17 23:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:44:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:45:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:45:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:45:05 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2010-Aug-17 23:45:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:45:05 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2010-Aug-17 23:45:05 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-Aug-17 23:45:05 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-17 23:45:05 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-17 23:45:05 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:45:05 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:45:05 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:45:05 LOG2 antvel: Parameters to Doppler: Topocentric 99905 2010 229 0.0 2010-Aug-17 23:45:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:45:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-17 23:45:05 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-17 23:45:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:45:05 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:45:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-17 23:45:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:45:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-Aug-17 23:45:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:45:05 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Aug-17 23:45:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-Aug-17 23:45:05 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.061499 2010.6296773202018 18.999933 2010-Aug-17 23:45:05 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000050 22.308972222222220 2010-Aug-17 23:45:05 LOG4 log_alfabeam: ALFABEAM 1 21.006999467708326 22.208691598985769 2010-Aug-17 23:45:05 LOG4 log_alfabeam: ALFABEAM 2 21.011022281163132 22.288532596735052 2010-Aug-17 23:45:05 LOG4 log_alfabeam: ALFABEAM 3 21.008625998843019 22.389355513101965 2010-Aug-17 23:45:05 LOG4 log_alfabeam: ALFABEAM 4 21.001934005872862 22.409016004551336 2010-Aug-17 23:45:05 LOG4 log_alfabeam: ALFABEAM 5 20.997893749004660 22.327287883059924 2010-Aug-17 23:45:05 LOG4 log_alfabeam: ALFABEAM 6 21.000561840947721 22.227820312191319 2010-Aug-17 23:45:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900086 2010-Aug-17 23:45:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:45:06 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Aug-17 23:45:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:45:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-17 23:45:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:45:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:45:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:45:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-17 23:45:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13507.00 2010-Aug-17 23:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:45:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:45:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:45:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:45:17 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2010-Aug-17 23:45:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:45:17 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2010-Aug-17 23:45:17 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-Aug-17 23:45:17 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-17 23:45:17 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-17 23:45:17 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:45:17 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:45:17 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:45:17 LOG2 antvel: Parameters to Doppler: Topocentric 99917 2010 229 0.0 2010-Aug-17 23:45:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:45:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-17 23:45:17 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-17 23:45:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:45:17 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:45:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-17 23:45:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:45:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-Aug-17 23:45:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:45:17 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Aug-17 23:45:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-Aug-17 23:45:17 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.064841 2010.6296777004588 18.999933 2010-Aug-17 23:45:17 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000014 22.308972222222216 2010-Aug-17 23:45:17 LOG4 log_alfabeam: ALFABEAM 1 21.007082772736666 22.209099144641439 2010-Aug-17 23:45:17 LOG4 log_alfabeam: ALFABEAM 2 21.011038964436644 22.289581462308885 2010-Aug-17 23:45:17 LOG4 log_alfabeam: ALFABEAM 3 21.008558604328876 22.390012250963665 2010-Aug-17 23:45:17 LOG4 log_alfabeam: ALFABEAM 4 21.001850918669941 22.408598287766896 2010-Aug-17 23:45:17 LOG4 log_alfabeam: ALFABEAM 5 20.997879048286091 22.326229936877475 2010-Aug-17 23:45:17 LOG4 log_alfabeam: ALFABEAM 6 21.000629428179845 22.227195188927329 2010-Aug-17 23:45:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900087 2010-Aug-17 23:45:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:45:18 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Aug-17 23:45:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:45:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-17 23:45:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:45:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:45:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:45:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-17 23:45:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13519.00 2010-Aug-17 23:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:45:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:45:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:45:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:45:29 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2010-Aug-17 23:45:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:45:29 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2010-Aug-17 23:45:29 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-Aug-17 23:45:29 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-17 23:45:29 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-17 23:45:29 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:45:29 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:45:29 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:45:29 LOG2 antvel: Parameters to Doppler: Topocentric 99929 2010 229 0.0 2010-Aug-17 23:45:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:45:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-17 23:45:29 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-17 23:45:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:45:29 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:45:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-17 23:45:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:45:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-Aug-17 23:45:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:45:29 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Aug-17 23:45:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-Aug-17 23:45:29 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.068184 2010.6296780807158 18.999933 2010-Aug-17 23:45:29 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000078 22.308972222222227 2010-Aug-17 23:45:29 LOG4 log_alfabeam: ALFABEAM 1 21.007165420685144 22.209518405118580 2010-Aug-17 23:45:29 LOG4 log_alfabeam: ALFABEAM 2 21.011054718635457 22.290629048880756 2010-Aug-17 23:45:29 LOG4 log_alfabeam: ALFABEAM 3 21.008490915327243 22.390655708365454 2010-Aug-17 23:45:29 LOG4 log_alfabeam: ALFABEAM 4 21.001768505260952 22.408168982950897 2010-Aug-17 23:45:29 LOG4 log_alfabeam: ALFABEAM 5 20.997865283767549 22.325173916715709 2010-Aug-17 23:45:29 LOG4 log_alfabeam: ALFABEAM 6 21.000697256164820 22.226583282550394 2010-Aug-17 23:45:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900088 2010-Aug-17 23:45:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:45:30 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-Aug-17 23:45:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:45:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-17 23:45:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:45:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:45:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:45:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-17 23:45:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13531.00 2010-Aug-17 23:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:45:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:45:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:45:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:45:41 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-Aug-17 23:45:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:45:41 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2010-Aug-17 23:45:41 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-Aug-17 23:45:41 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-17 23:45:41 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-17 23:45:41 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:45:41 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:45:41 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:45:41 LOG2 antvel: Parameters to Doppler: Topocentric 99941 2010 229 0.0 2010-Aug-17 23:45:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:45:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-17 23:45:41 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-17 23:45:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:45:41 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:45:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-17 23:45:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:45:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-Aug-17 23:45:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:45:41 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Aug-17 23:45:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-Aug-17 23:45:41 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.071526 2010.6296784609731 18.999933 2010-Aug-17 23:45:41 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000011 22.308972222222216 2010-Aug-17 23:45:41 LOG4 log_alfabeam: ALFABEAM 1 21.007247336806067 22.209948812470092 2010-Aug-17 23:45:41 LOG4 log_alfabeam: ALFABEAM 2 21.011069539336336 22.291674321805473 2010-Aug-17 23:45:41 LOG4 log_alfabeam: ALFABEAM 3 21.008423003553553 22.391285401184987 2010-Aug-17 23:45:41 LOG4 log_alfabeam: ALFABEAM 4 21.001686839854131 22.407728670391183 2010-Aug-17 23:45:41 LOG4 log_alfabeam: ALFABEAM 5 20.997852457013359 22.324120860642402 2010-Aug-17 23:45:41 LOG4 log_alfabeam: ALFABEAM 6 21.000765253683600 22.225985034123294 2010-Aug-17 23:45:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900089 2010-Aug-17 23:45:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:45:42 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Aug-17 23:45:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:45:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-17 23:45:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:45:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:45:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:45:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-17 23:45:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13543.00 2010-Aug-17 23:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:45:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:45:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:45:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:45:53 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2010-Aug-17 23:45:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:45:53 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2010-Aug-17 23:45:53 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-Aug-17 23:45:53 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-17 23:45:53 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-17 23:45:53 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:45:53 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:45:53 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:45:53 LOG2 antvel: Parameters to Doppler: Topocentric 99953 2010 229 0.0 2010-Aug-17 23:45:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:45:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-17 23:45:53 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-17 23:45:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:45:53 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:45:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-17 23:45:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:45:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-Aug-17 23:45:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:45:53 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Aug-17 23:45:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-Aug-17 23:45:53 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.074869 2010.6296788412301 18.999933 2010-Aug-17 23:45:53 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000050 22.308972222222220 2010-Aug-17 23:45:53 LOG4 log_alfabeam: ALFABEAM 1 21.007328545960679 22.210390298452381 2010-Aug-17 23:45:53 LOG4 log_alfabeam: ALFABEAM 2 21.011083441407198 22.292717506279466 2010-Aug-17 23:45:53 LOG4 log_alfabeam: ALFABEAM 3 21.008354859459256 22.391901623980704 2010-Aug-17 23:45:53 LOG4 log_alfabeam: ALFABEAM 4 21.001605897320154 22.407277418410839 2010-Aug-17 23:45:53 LOG4 log_alfabeam: ALFABEAM 5 20.997840552701938 22.323070536182726 2010-Aug-17 23:45:53 LOG4 log_alfabeam: ALFABEAM 6 21.000833430990181 22.225400144291516 2010-Aug-17 23:45:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900090 2010-Aug-17 23:45:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:45:54 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Aug-17 23:45:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:45:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-17 23:45:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:45:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:45:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:45:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-17 23:45:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13555.00 2010-Aug-17 23:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:45:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:46:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:46:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:46:05 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Aug-17 23:46:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:46:05 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Aug-17 23:46:05 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-Aug-17 23:46:05 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-17 23:46:05 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-17 23:46:05 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:46:05 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:46:05 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:46:05 LOG2 antvel: Parameters to Doppler: Topocentric 99965 2010 229 0.0 2010-Aug-17 23:46:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:46:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-17 23:46:05 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-17 23:46:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:46:05 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:46:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-17 23:46:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:46:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-Aug-17 23:46:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:46:05 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Aug-17 23:46:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-Aug-17 23:46:05 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.078211 2010.6296792214871 18.999933 2010-Aug-17 23:46:05 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000011 22.308972222222216 2010-Aug-17 23:46:05 LOG4 log_alfabeam: ALFABEAM 1 21.007408976587914 22.210842265528896 2010-Aug-17 23:46:05 LOG4 log_alfabeam: ALFABEAM 2 21.011096423487022 22.293757586394513 2010-Aug-17 23:46:05 LOG4 log_alfabeam: ALFABEAM 3 21.008286554693534 22.392503942566126 2010-Aug-17 23:46:05 LOG4 log_alfabeam: ALFABEAM 4 21.001525748625451 22.406815836058666 2010-Aug-17 23:46:05 LOG4 log_alfabeam: ALFABEAM 5 20.997829569377807 22.322023959929659 2010-Aug-17 23:46:05 LOG4 log_alfabeam: ALFABEAM 6 21.000901717139996 22.224829005519904 2010-Aug-17 23:46:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900091 2010-Aug-17 23:46:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:46:06 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Aug-17 23:46:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:46:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-17 23:46:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:46:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:46:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:46:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-17 23:46:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13567.00 2010-Aug-17 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:46:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:46:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:46:17 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2010-Aug-17 23:46:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:46:17 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Aug-17 23:46:17 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2010-Aug-17 23:46:17 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Aug-17 23:46:17 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-Aug-17 23:46:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-17 23:46:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-17 23:46:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-17 23:46:17 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Aug-17 23:46:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-17 23:46:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-17 23:46:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-17 23:46:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-17 23:46:17 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Aug-17 23:46:17 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-Aug-17 23:46:17 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-Aug-17 23:46:17 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-17 23:46:17 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-17 23:46:17 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:46:17 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:46:17 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:46:17 LOG2 antvel: Parameters to Doppler: Topocentric 99977 2010 229 0.0 2010-Aug-17 23:46:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:46:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-17 23:46:17 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-17 23:46:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:46:17 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:46:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-17 23:46:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:46:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-Aug-17 23:46:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:46:17 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-Aug-17 23:46:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-17 23:46:17 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.081554 2010.6296796017441 18.999933 2010-Aug-17 23:46:17 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000025 22.308972222222220 2010-Aug-17 23:46:17 LOG4 log_alfabeam: ALFABEAM 1 21.007488655030791 22.211304643759135 2010-Aug-17 23:46:17 LOG4 log_alfabeam: ALFABEAM 2 21.011108501229138 22.294794801596630 2010-Aug-17 23:46:17 LOG4 log_alfabeam: ALFABEAM 3 21.008218079015158 22.393092668331402 2010-Aug-17 23:46:17 LOG4 log_alfabeam: ALFABEAM 4 21.001446367145292 22.406343992850505 2010-Aug-17 23:46:17 LOG4 log_alfabeam: ALFABEAM 5 20.997819490991322 22.320980884025776 2010-Aug-17 23:46:17 LOG4 log_alfabeam: ALFABEAM 6 21.000970123154808 22.224271302765793 2010-Aug-17 23:46:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900092 2010-Aug-17 23:46:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:46:18 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-Aug-17 23:46:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:46:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-17 23:46:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:46:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:46:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:46:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-Aug-17 23:46:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13579.00 2010-Aug-17 23:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:46:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:46:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:46:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:46:29 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2010-Aug-17 23:46:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:46:29 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2010-Aug-17 23:46:29 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-Aug-17 23:46:29 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-17 23:46:29 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-17 23:46:29 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:46:29 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:46:29 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:46:29 LOG2 antvel: Parameters to Doppler: Topocentric 99989 2010 229 0.0 2010-Aug-17 23:46:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:46:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-17 23:46:29 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-17 23:46:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:46:29 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:46:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-17 23:46:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:46:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-Aug-17 23:46:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:46:29 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Aug-17 23:46:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-17 23:46:29 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.084896 2010.6296799820013 18.999933 2010-Aug-17 23:46:29 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000043 22.308972222222231 2010-Aug-17 23:46:29 LOG4 log_alfabeam: ALFABEAM 1 21.007567513048539 22.211776810217540 2010-Aug-17 23:46:29 LOG4 log_alfabeam: ALFABEAM 2 21.011119676175756 22.295828158060907 2010-Aug-17 23:46:29 LOG4 log_alfabeam: ALFABEAM 3 21.008149503700277 22.393667416204607 2010-Aug-17 23:46:29 LOG4 log_alfabeam: ALFABEAM 4 21.001367820477640 22.405862522354766 2010-Aug-17 23:46:29 LOG4 log_alfabeam: ALFABEAM 5 20.997810313244603 22.319942300380468 2010-Aug-17 23:46:29 LOG4 log_alfabeam: ALFABEAM 6 21.001038578654917 22.223727380952568 2010-Aug-17 23:46:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900093 2010-Aug-17 23:46:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:46:30 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Aug-17 23:46:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:46:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-17 23:46:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:46:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:46:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:46:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-Aug-17 23:46:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13591.00 2010-Aug-17 23:46:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:46:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:46:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:46:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:46:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:46:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:46:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:46:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:46:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:46:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:46:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:46:41 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Aug-17 23:46:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:46:41 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2010-Aug-17 23:46:41 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-Aug-17 23:46:41 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-17 23:46:41 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-17 23:46:41 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:46:41 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:46:41 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:46:41 LOG2 antvel: Parameters to Doppler: Topocentric 100001 2010 229 0.0 2010-Aug-17 23:46:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:46:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-17 23:46:41 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-17 23:46:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:46:41 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:46:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-17 23:46:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:46:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-Aug-17 23:46:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:46:41 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Aug-17 23:46:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-17 23:46:41 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.088239 2010.6296803622583 18.999933 2010-Aug-17 23:46:41 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000011 22.308972222222216 2010-Aug-17 23:46:41 LOG4 log_alfabeam: ALFABEAM 1 21.007645578475248 22.212258695856793 2010-Aug-17 23:46:41 LOG4 log_alfabeam: ALFABEAM 2 21.011129964633703 22.296857910803340 2010-Aug-17 23:46:41 LOG4 log_alfabeam: ALFABEAM 3 21.008080817664609 22.394228513127675 2010-Aug-17 23:46:41 LOG4 log_alfabeam: ALFABEAM 4 21.001290080497704 22.405371492681645 2010-Aug-17 23:46:41 LOG4 log_alfabeam: ALFABEAM 5 20.997802019501741 22.318907944562426 2010-Aug-17 23:46:41 LOG4 log_alfabeam: ALFABEAM 6 21.001107095567278 22.223196910740558 2010-Aug-17 23:46:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900094 2010-Aug-17 23:46:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:46:42 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Aug-17 23:46:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:46:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-17 23:46:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:46:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:46:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:46:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-Aug-17 23:46:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13603.00 2010-Aug-17 23:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:46:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:46:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:46:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:46:53 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2010-Aug-17 23:46:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:46:53 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2010-Aug-17 23:46:53 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-Aug-17 23:46:53 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-17 23:46:53 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-17 23:46:53 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:46:53 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:46:53 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:46:53 LOG2 antvel: Parameters to Doppler: Topocentric 100013 2010 229 0.0 2010-Aug-17 23:46:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:46:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-17 23:46:53 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-17 23:46:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:46:53 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:46:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-17 23:46:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:46:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-Aug-17 23:46:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:46:53 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Aug-17 23:46:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-17 23:46:53 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.091581 2010.6296807425153 18.999826 2010-Aug-17 23:46:53 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000036 22.308972222222220 2010-Aug-17 23:46:53 LOG4 log_alfabeam: ALFABEAM 1 21.007722797091329 22.212749736771553 2010-Aug-17 23:46:53 LOG4 log_alfabeam: ALFABEAM 2 21.011139371316759 22.297883287181779 2010-Aug-17 23:46:53 LOG4 log_alfabeam: ALFABEAM 3 21.008012080824148 22.394775738268621 2010-Aug-17 23:46:53 LOG4 log_alfabeam: ALFABEAM 4 21.001213200194801 22.404871473829278 2010-Aug-17 23:46:53 LOG4 log_alfabeam: ALFABEAM 5 20.997794602913281 22.317878584503600 2010-Aug-17 23:46:53 LOG4 log_alfabeam: ALFABEAM 6 21.001175615051277 22.222680078595779 2010-Aug-17 23:46:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900095 2010-Aug-17 23:46:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:46:54 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-Aug-17 23:46:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:46:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-17 23:46:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:46:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:46:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:46:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-Aug-17 23:46:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13615.00 2010-Aug-17 23:46:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:46:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:46:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:46:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:46:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:46:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:46:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:46:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:46:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:47:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:47:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:47:05 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-Aug-17 23:47:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:47:05 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Aug-17 23:47:05 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-Aug-17 23:47:05 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-17 23:47:05 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-17 23:47:05 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:47:05 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:47:05 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:47:05 LOG2 antvel: Parameters to Doppler: Topocentric 100025 2010 229 0.0 2010-Aug-17 23:47:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:47:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-17 23:47:05 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-17 23:47:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:47:05 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:47:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-17 23:47:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:47:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-Aug-17 23:47:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:47:05 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Aug-17 23:47:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-17 23:47:05 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.094923 2010.6296811227724 18.999933 2010-Aug-17 23:47:05 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000043 22.308972222222216 2010-Aug-17 23:47:05 LOG4 log_alfabeam: ALFABEAM 1 21.007799143665849 22.213249475895918 2010-Aug-17 23:47:05 LOG4 log_alfabeam: ALFABEAM 2 21.011147909276282 22.298903665687657 2010-Aug-17 23:47:05 LOG4 log_alfabeam: ALFABEAM 3 21.007943333798785 22.395308925930816 2010-Aug-17 23:47:05 LOG4 log_alfabeam: ALFABEAM 4 21.001137206039381 22.404362934983272 2010-Aug-17 23:47:05 LOG4 log_alfabeam: ALFABEAM 5 20.997788047953428 22.316854833424941 2010-Aug-17 23:47:05 LOG4 log_alfabeam: ALFABEAM 6 21.001244097451437 22.222177028145552 2010-Aug-17 23:47:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900096 2010-Aug-17 23:47:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:47:06 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Aug-17 23:47:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:47:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-17 23:47:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:47:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:47:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:47:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-Aug-17 23:47:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13627.00 2010-Aug-17 23:47:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:47:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:47:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:47:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:47:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:47:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:47:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:47:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:47:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:47:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:47:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:47:17 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2010-Aug-17 23:47:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:47:17 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Aug-17 23:47:17 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-Aug-17 23:47:17 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-17 23:47:17 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-17 23:47:17 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:47:17 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:47:17 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:47:17 LOG2 antvel: Parameters to Doppler: Topocentric 100037 2010 229 0.0 2010-Aug-17 23:47:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:47:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-17 23:47:17 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-17 23:47:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:47:17 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:47:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-17 23:47:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:47:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-Aug-17 23:47:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:47:17 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Aug-17 23:47:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-17 23:47:17 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.098266 2010.6296815030294 18.999933 2010-Aug-17 23:47:17 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000029 22.308972222222220 2010-Aug-17 23:47:17 LOG4 log_alfabeam: ALFABEAM 1 21.007874656819315 22.213757945241007 2010-Aug-17 23:47:17 LOG4 log_alfabeam: ALFABEAM 2 21.011155593929516 22.299919607514923 2010-Aug-17 23:47:17 LOG4 log_alfabeam: ALFABEAM 3 21.007874552453298 22.395828606803569 2010-Aug-17 23:47:17 LOG4 log_alfabeam: ALFABEAM 4 21.001062057375012 22.403845834183844 2010-Aug-17 23:47:17 LOG4 log_alfabeam: ALFABEAM 5 20.997782340023615 22.315836119697174 2010-Aug-17 23:47:17 LOG4 log_alfabeam: ALFABEAM 6 21.001312567884476 22.221687231230618 2010-Aug-17 23:47:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900097 2010-Aug-17 23:47:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:47:18 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Aug-17 23:47:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:47:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-17 23:47:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:47:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:47:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:47:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-Aug-17 23:47:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13639.00 2010-Aug-17 23:47:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:47:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:47:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:47:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:47:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:47:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:47:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:47:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:47:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:47:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:47:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:47:29 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2010-Aug-17 23:47:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:47:29 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Aug-17 23:47:29 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-Aug-17 23:47:29 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-17 23:47:29 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-17 23:47:29 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:47:29 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:47:29 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:47:29 LOG2 antvel: Parameters to Doppler: Topocentric 100049 2010 229 0.0 2010-Aug-17 23:47:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:47:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-17 23:47:29 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-17 23:47:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:47:29 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:47:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-17 23:47:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:47:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-Aug-17 23:47:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:47:29 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Aug-17 23:47:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-17 23:47:29 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.101608 2010.6296818832866 18.999933 2010-Aug-17 23:47:29 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000043 22.308972222222227 2010-Aug-17 23:47:29 LOG4 log_alfabeam: ALFABEAM 1 21.007949266334574 22.214274396524868 2010-Aug-17 23:47:29 LOG4 log_alfabeam: ALFABEAM 2 21.011162432814597 22.300929989897231 2010-Aug-17 23:47:29 LOG4 log_alfabeam: ALFABEAM 3 21.007805816632079 22.396334395904017 2010-Aug-17 23:47:29 LOG4 log_alfabeam: ALFABEAM 4 21.000987824236212 22.403320931745011 2010-Aug-17 23:47:29 LOG4 log_alfabeam: ALFABEAM 5 20.997777468506282 22.314823558779370 2010-Aug-17 23:47:29 LOG4 log_alfabeam: ALFABEAM 6 21.001380947799252 22.221211033404082 2010-Aug-17 23:47:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900098 2010-Aug-17 23:47:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:47:30 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Aug-17 23:47:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:47:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-17 23:47:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:47:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:47:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:47:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-Aug-17 23:47:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13651.00 2010-Aug-17 23:47:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:47:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:47:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:47:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:47:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:47:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:47:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:47:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:47:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:47:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:47:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:47:41 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Aug-17 23:47:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:47:41 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Aug-17 23:47:41 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-Aug-17 23:47:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-17 23:47:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-17 23:47:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-17 23:47:41 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Aug-17 23:47:41 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-17 23:47:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-17 23:47:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-17 23:47:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-17 23:47:41 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2010-Aug-17 23:47:41 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-Aug-17 23:47:41 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-17 23:47:41 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-Aug-17 23:47:41 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:47:41 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:47:41 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:47:41 LOG2 antvel: Parameters to Doppler: Topocentric 100061 2010 229 0.0 2010-Aug-17 23:47:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:47:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-Aug-17 23:47:41 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-Aug-17 23:47:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:47:41 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:47:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-17 23:47:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:47:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-Aug-17 23:47:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:47:41 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-Aug-17 23:47:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-Aug-17 23:47:41 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.104951 2010.6296822635436 18.999933 2010-Aug-17 23:47:41 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000007 22.308972222222216 2010-Aug-17 23:47:41 LOG4 log_alfabeam: ALFABEAM 1 21.008023003640453 22.214798773662697 2010-Aug-17 23:47:41 LOG4 log_alfabeam: ALFABEAM 2 21.011168443244191 22.301935110489548 2010-Aug-17 23:47:41 LOG4 log_alfabeam: ALFABEAM 3 21.007737112613007 22.396826651889644 2010-Aug-17 23:47:41 LOG4 log_alfabeam: ALFABEAM 4 21.000914474902700 22.402788281561058 2010-Aug-17 23:47:41 LOG4 log_alfabeam: ALFABEAM 5 20.997773415959571 22.313816841737278 2010-Aug-17 23:47:41 LOG4 log_alfabeam: ALFABEAM 6 21.001449251856268 22.220748077044746 2010-Aug-17 23:47:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900099 2010-Aug-17 23:47:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:47:42 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-Aug-17 23:47:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:47:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-Aug-17 23:47:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:47:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:47:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:47:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-Aug-17 23:47:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13663.00 2010-Aug-17 23:47:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:47:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:47:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:47:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:47:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:47:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:47:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:47:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:47:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:47:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:47:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:47:53 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2010-Aug-17 23:47:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:47:53 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2010-Aug-17 23:47:53 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-Aug-17 23:47:53 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-17 23:47:53 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-Aug-17 23:47:53 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:47:53 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:47:53 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:47:53 LOG2 antvel: Parameters to Doppler: Topocentric 100073 2010 229 0.0 2010-Aug-17 23:47:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:47:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-Aug-17 23:47:53 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-Aug-17 23:47:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:47:53 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:47:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-17 23:47:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:47:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-Aug-17 23:47:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:47:53 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Aug-17 23:47:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-Aug-17 23:47:53 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.108293 2010.6296826438006 18.999933 2010-Aug-17 23:47:53 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000032 22.308972222222231 2010-Aug-17 23:47:53 LOG4 log_alfabeam: ALFABEAM 1 21.008095812614037 22.215330397565811 2010-Aug-17 23:47:53 LOG4 log_alfabeam: ALFABEAM 2 21.011173635423749 22.302934073258140 2010-Aug-17 23:47:53 LOG4 log_alfabeam: ALFABEAM 3 21.007668508272207 22.397305149327558 2010-Aug-17 23:47:53 LOG4 log_alfabeam: ALFABEAM 4 21.000842064745360 22.402248570191258 2010-Aug-17 23:47:53 LOG4 log_alfabeam: ALFABEAM 5 20.997770169750240 22.312816854984721 2010-Aug-17 23:47:53 LOG4 log_alfabeam: ALFABEAM 6 21.001517413604265 22.220298554279736 2010-Aug-17 23:47:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900100 2010-Aug-17 23:47:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:47:54 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Aug-17 23:47:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:47:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-Aug-17 23:47:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:47:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:47:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:47:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-Aug-17 23:47:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13675.00 2010-Aug-17 23:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:47:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:48:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:48:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:48:05 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Aug-17 23:48:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:48:05 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Aug-17 23:48:05 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-Aug-17 23:48:05 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-17 23:48:05 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-Aug-17 23:48:05 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:48:05 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:48:05 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:48:05 LOG2 antvel: Parameters to Doppler: Topocentric 100085 2010 229 0.0 2010-Aug-17 23:48:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:48:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-Aug-17 23:48:05 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-Aug-17 23:48:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:48:05 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:48:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-17 23:48:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:48:05 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-Aug-17 23:48:05 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:48:05 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Aug-17 23:48:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-Aug-17 23:48:05 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.111636 2010.6296830240576 18.999933 2010-Aug-17 23:48:05 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000029 22.308972222222220 2010-Aug-17 23:48:05 LOG4 log_alfabeam: ALFABEAM 1 21.008167726006942 22.215869221223979 2010-Aug-17 23:48:05 LOG4 log_alfabeam: ALFABEAM 2 21.011178026808842 22.303927193578300 2010-Aug-17 23:48:05 LOG4 log_alfabeam: ALFABEAM 3 21.007599988675828 22.397770256242477 2010-Aug-17 23:48:05 LOG4 log_alfabeam: ALFABEAM 4 21.000770560729016 22.401701841988160 2010-Aug-17 23:48:05 LOG4 log_alfabeam: ALFABEAM 5 20.997767712381282 22.311823271396943 2010-Aug-17 23:48:05 LOG4 log_alfabeam: ALFABEAM 6 21.001585448929323 22.219862099539082 2010-Aug-17 23:48:05 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900101 2010-Aug-17 23:48:06 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:48:06 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-Aug-17 23:48:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:48:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-Aug-17 23:48:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:48:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:48:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:48:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-Aug-17 23:48:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13687.00 2010-Aug-17 23:48:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:48:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:48:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:48:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:48:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:48:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:48:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:48:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:48:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:48:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:48:17 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:48:17 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2010-Aug-17 23:48:17 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:48:17 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Aug-17 23:48:17 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-Aug-17 23:48:17 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-17 23:48:17 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-Aug-17 23:48:17 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:48:17 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:48:17 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:48:17 LOG2 antvel: Parameters to Doppler: Topocentric 100097 2010 229 0.0 2010-Aug-17 23:48:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:48:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-Aug-17 23:48:17 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-Aug-17 23:48:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:48:17 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:48:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-17 23:48:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:48:17 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-Aug-17 23:48:17 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:48:17 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Aug-17 23:48:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-Aug-17 23:48:17 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.114978 2010.6296834043146 18.999933 2010-Aug-17 23:48:17 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000029 22.308972222222216 2010-Aug-17 23:48:17 LOG4 log_alfabeam: ALFABEAM 1 21.008238691154848 22.216414558325120 2010-Aug-17 23:48:17 LOG4 log_alfabeam: ALFABEAM 2 21.011181629611055 22.304913607486938 2010-Aug-17 23:48:17 LOG4 log_alfabeam: ALFABEAM 3 21.007531620237305 22.398221788023424 2010-Aug-17 23:48:17 LOG4 log_alfabeam: ALFABEAM 4 21.000700014750386 22.401148789841294 2010-Aug-17 23:48:17 LOG4 log_alfabeam: ALFABEAM 5 20.997766029330858 22.310836943571172 2010-Aug-17 23:48:17 LOG4 log_alfabeam: ALFABEAM 6 21.001653292951168 22.219438866316846 2010-Aug-17 23:48:17 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900102 2010-Aug-17 23:48:18 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:48:18 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-Aug-17 23:48:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:48:18 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-Aug-17 23:48:18 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:48:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:48:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:48:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-Aug-17 23:48:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13699.00 2010-Aug-17 23:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:48:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:48:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:48:29 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:48:29 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2010-Aug-17 23:48:29 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:48:29 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Aug-17 23:48:29 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-Aug-17 23:48:29 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-17 23:48:29 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-Aug-17 23:48:29 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:48:29 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:48:29 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:48:29 LOG2 antvel: Parameters to Doppler: Topocentric 100109 2010 229 0.0 2010-Aug-17 23:48:29 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:48:29 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-Aug-17 23:48:29 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-Aug-17 23:48:29 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:48:29 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:48:29 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-17 23:48:29 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:48:29 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-Aug-17 23:48:29 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:48:29 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Aug-17 23:48:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-Aug-17 23:48:29 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.118321 2010.6296837845719 18.999933 2010-Aug-17 23:48:29 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000025 22.308972222222216 2010-Aug-17 23:48:29 LOG4 log_alfabeam: ALFABEAM 1 21.008308742036672 22.216966372853488 2010-Aug-17 23:48:29 LOG4 log_alfabeam: ALFABEAM 2 21.011184461282447 22.305893648012088 2010-Aug-17 23:48:29 LOG4 log_alfabeam: ALFABEAM 3 21.007463386754686 22.398660120005591 2010-Aug-17 23:48:29 LOG4 log_alfabeam: ALFABEAM 4 21.000630392559231 22.400589446672395 2010-Aug-17 23:48:29 LOG4 log_alfabeam: ALFABEAM 5 20.997765103195171 22.309857526418643 2010-Aug-17 23:48:29 LOG4 log_alfabeam: ALFABEAM 6 21.001720962824614 22.219028483137567 2010-Aug-17 23:48:29 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900103 2010-Aug-17 23:48:30 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:48:30 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-Aug-17 23:48:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:48:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-Aug-17 23:48:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:48:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:48:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:48:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-Aug-17 23:48:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13711.00 2010-Aug-17 23:48:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:48:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:48:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:48:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:48:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:48:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:48:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:48:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:48:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:48:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:48:41 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:48:41 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-Aug-17 23:48:41 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:48:41 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Aug-17 23:48:41 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-Aug-17 23:48:41 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-17 23:48:41 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-Aug-17 23:48:41 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:48:41 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:48:41 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:48:41 LOG2 antvel: Parameters to Doppler: Topocentric 100121 2010 229 0.0 2010-Aug-17 23:48:41 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:48:41 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-Aug-17 23:48:41 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-Aug-17 23:48:41 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:48:41 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:48:41 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-17 23:48:41 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:48:41 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-Aug-17 23:48:41 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:48:41 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Aug-17 23:48:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-Aug-17 23:48:41 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.121663 2010.6296841648289 18.999933 2010-Aug-17 23:48:41 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000014 22.308972222222227 2010-Aug-17 23:48:41 LOG4 log_alfabeam: ALFABEAM 1 21.008377829388952 22.217523974818285 2010-Aug-17 23:48:41 LOG4 log_alfabeam: ALFABEAM 2 21.011186535825633 22.306866484346404 2010-Aug-17 23:48:41 LOG4 log_alfabeam: ALFABEAM 3 21.007395353011507 22.399085105869489 2010-Aug-17 23:48:41 LOG4 log_alfabeam: ALFABEAM 4 21.000561742642269 22.400024508181176 2010-Aug-17 23:48:41 LOG4 log_alfabeam: ALFABEAM 5 20.997764917785464 22.308885837848020 2010-Aug-17 23:48:41 LOG4 log_alfabeam: ALFABEAM 6 21.001788395388552 22.218631067433865 2010-Aug-17 23:48:41 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900104 2010-Aug-17 23:48:42 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:48:42 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Aug-17 23:48:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:48:42 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-Aug-17 23:48:42 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:48:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:48:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:48:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-Aug-17 23:48:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13723.00 2010-Aug-17 23:48:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:48:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:48:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:48:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:48:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:48:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:48:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:48:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:48:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:48:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:48:53 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:48:53 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Aug-17 23:48:53 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:48:53 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2010-Aug-17 23:48:53 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-Aug-17 23:48:53 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-17 23:48:53 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-Aug-17 23:48:53 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:48:53 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:48:53 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:48:53 LOG2 antvel: Parameters to Doppler: Topocentric 100133 2010 229 0.0 2010-Aug-17 23:48:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:48:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-Aug-17 23:48:53 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-Aug-17 23:48:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:48:53 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:48:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-17 23:48:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:48:53 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-Aug-17 23:48:53 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-Aug-17 23:48:53 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Aug-17 23:48:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-Aug-17 23:48:53 LOG5 log_alfabeam: Parameters: 21.004500000000004 22.30897222222222 21.125006 2010.6296845450859 18.999933 2010-Aug-17 23:48:53 LOG4 log_alfabeam: ALFABEAM 0 21.004500000000018 22.308972222222227 2010-Aug-17 23:48:53 LOG4 log_alfabeam: ALFABEAM 1 21.008445988306612 22.218087340881915 2010-Aug-17 23:48:53 LOG4 log_alfabeam: ALFABEAM 2 21.011187870547889 22.307832466831364 2010-Aug-17 23:48:53 LOG4 log_alfabeam: ALFABEAM 3 21.007327501503092 22.399497126161481 2010-Aug-17 23:48:53 LOG4 log_alfabeam: ALFABEAM 4 21.000494029649104 22.399453994211125 2010-Aug-17 23:48:53 LOG4 log_alfabeam: ALFABEAM 5 20.997765455932843 22.307921515300905 2010-Aug-17 23:48:53 LOG4 log_alfabeam: ALFABEAM 6 21.001855609088977 22.218246243887201 2010-Aug-17 23:48:53 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 22900105 2010-Aug-17 23:48:54 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-Aug-17 23:48:54 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-Aug-17 23:48:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:48:54 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-Aug-17 23:48:54 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:48:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:48:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:48:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-Aug-17 23:48:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13735.00 2010-Aug-17 23:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:48:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-17 23:49:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-17 23:49:05 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-Aug-17 23:49:05 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2010-Aug-17 23:49:05 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-Aug-17 23:49:05 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Aug-17 23:49:05 INFO2 smartfreq: Switching off CAL 2010-Aug-17 23:49:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-17 23:49:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-17 23:49:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-17 23:49:05 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Aug-17 23:49:05 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-17 23:49:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-17 23:49:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-17 23:49:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-17 23:49:05 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2010-Aug-17 23:49:05 INFO3 restore_frequencies: Restoring original frequencies 2010-Aug-17 23:49:05 LOG5 antvel: Calling 'antvel 210016.200000 221832.300000 J Topocentric 0' 2010-Aug-17 23:49:05 LOG2 antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62968 J 2010-Aug-17 23:49:05 LOG2 antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:49:05 LOG2 antvel: Parameters to Doppler: Topocentric 100145 2010 229 0.0 2010-Aug-17 23:49:05 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:49:05 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-Aug-17 23:49:05 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-Aug-17 23:49:05 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:49:05 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:49:05 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-17 23:49:05 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:49:05 STOP finish_task: Finishing task 'smart frequency switching' 2010-Aug-17 23:49:05 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-17 23:49:05 DONE finish_task: DONE finished pattern: smart frequency switching 2010-Aug-17 23:49:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-17 23:49:05 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2010-Aug-17 23:49:06 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Aug-17 23:49:06 NOTE run_command_file: DONE with command file processing 2010-Aug-17 23:49:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-Aug-17 23:49:06 STOP finish_task: Finishing task 'running command file 'command_galfasrc_aug10.cmd'' 2010-Aug-17 23:49:06 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-17 23:49:06 DONE finish_task: DONE finished running: command file 'command_galfasrc_aug10.cmd' 2010-Aug-17 23:49:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-17 23:49:06 END end_task: Finishing task 'running command file 'command_galfasrc_aug10.cmd'' with status 'OK' 2010-Aug-17 23:49:06 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Aug-17 23:49:06 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-17 23:49:06 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:49:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:49:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:49:13 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Aug-17 23:49:13 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Aug-17 23:49:13 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Aug-17 23:49:13 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Aug-17 23:49:13 LOG5 begin_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2010-Aug-17 23:49:13 NOTE restart_wapp: Restarting all WAPPs 2010-Aug-17 23:49:13 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Aug-17 23:49:13 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Aug-17 23:49:13 LOG5 end_task: Level: (1) ID = <10099> Status = 0 0 0 0 ok 2010-Aug-17 23:49:13 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-17 23:49:13 LOG3 exec_msg: Closing socket 2010-Aug-17 23:49:14 LOG3 exec_msg: Closing socket 2010-Aug-17 23:49:14 LOG3 exec_msg: Closing socket 2010-Aug-17 23:49:14 LOG3 exec_msg: Closing socket 2010-Aug-17 23:49:16 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Aug-17 23:49:16 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Aug-17 23:49:16 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Aug-17 23:49:16 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Aug-17 23:49:28 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2010.conf' 2010-Aug-17 23:49:28 LOG2 CIMA-antvel: Precessing RA = 21:00:16.2 Dec = +22:18:32.3 Epoch = 2010.62969 J 2010-Aug-17 23:49:28 LOG2 CIMA-antvel: Computed apparent RA = 21:00:47.1 Dec = +22:21:14.5 2010-Aug-17 23:49:28 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 100168 2010 229 0.0 2010-Aug-17 23:49:28 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:49:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Aug-17 23:49:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Aug-17 23:49:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Aug-17 23:49:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Aug-17 23:49:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Aug-17 23:49:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-Aug-17 23:49:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Aug-17 23:49:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Aug-17 23:49:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Aug-17 23:49:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Aug-17 23:49:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Aug-17 23:49:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Aug-17 23:49:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-17 23:49:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-17 23:49:30 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-17 23:49:30 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2010-Aug-17 23:49:30 LOG4 exec_msg: From OBSERVER: config_iflo 2010-Aug-17 23:49:30 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Aug-17 23:49:30 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2010-Aug-17 23:49:30 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Aug-17 23:49:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Aug-17 23:49:30 LOG1 config_iflo: Receiver ALFA already selected 2010-Aug-17 23:49:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-17 23:49:30 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-17 23:49:30 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-17 23:49:30 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Aug-17 23:49:30 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-17 23:49:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-17 23:49:30 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2010-Aug-17 23:49:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-17 23:49:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-17 23:49:30 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-Aug-17 23:49:30 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-Aug-17 23:49:30 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Aug-17 23:49:30 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Aug-17 23:49:30 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-Aug-17 23:49:30 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-Aug-17 23:49:31 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-Aug-17 23:49:31 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-17 23:49:31 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-Aug-17 23:49:31 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-Aug-17 23:49:31 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Aug-17 23:49:31 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Aug-17 23:49:31 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Aug-17 23:49:31 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Aug-17 23:49:31 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Aug-17 23:49:31 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-Aug-17 23:49:31 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-Aug-17 23:49:31 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-Aug-17 23:49:31 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-Aug-17 23:49:31 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Aug-17 23:49:31 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-Aug-17 23:49:31 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-Aug-17 23:49:31 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Aug-17 23:49:31 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:49:31 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-Aug-17 23:49:31 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-Aug-17 23:49:31 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Aug-17 23:49:31 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-Aug-17 23:49:31 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-Aug-17 23:49:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Aug-17 23:49:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:49:31 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Aug-17 23:49:31 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-Aug-17 23:49:31 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-17 23:49:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Aug-17 23:49:31 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:49:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:49:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:49:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:49:31 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-Aug-17 23:49:31 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Aug-17 23:49:31 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-Aug-17 23:49:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Aug-17 23:49:31 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Aug-17 23:49:31 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2010-Aug-17 23:49:31 DONE finish_task: DONE finished configuration: IF/LO path 2010-Aug-17 23:49:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-17 23:49:31 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Aug-17 23:49:31 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2010-Aug-17 23:49:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:49:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Aug-17 23:49:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Aug-17 23:49:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Aug-17 23:49:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Aug-17 23:49:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Aug-17 23:49:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Aug-17 23:49:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Aug-17 23:49:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Aug-17 23:49:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Aug-17 23:49:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Aug-17 23:49:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Aug-17 23:49:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Aug-17 23:49:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Aug-17 23:49:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Aug-17 23:49:31 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Aug-17 23:49:32 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2010-Aug-17 23:49:32 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2010-Aug-17 23:49:32 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Aug-17 23:49:32 LOG5 begin_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Aug-17 23:49:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Aug-17 23:49:32 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Aug-17 23:49:32 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Aug-17 23:49:32 START begin_task: Starting task 'selecting calibration port' 2010-Aug-17 23:49:32 LOG5 begin_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2010-Aug-17 23:49:32 LOG3 vw_send: To DATATAKING: calport 3 2010-Aug-17 23:49:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Aug-17 23:49:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:49:32 START begin_task: Starting task 'waiting on calport' 2010-Aug-17 23:49:32 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Aug-17 23:49:32 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2010-Aug-17 23:49:32 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Aug-17 23:49:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:49:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:49:32 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-17 23:49:32 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Aug-17 23:49:32 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2010-Aug-17 23:49:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Aug-17 23:49:32 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Aug-17 23:49:32 LOG5 end_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2010-Aug-17 23:49:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-17 23:49:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-17 23:49:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-17 23:49:32 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2010-Aug-17 23:49:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:49:32 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-17 23:49:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-17 23:49:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-17 23:49:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-17 23:49:32 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2010-Aug-17 23:49:32 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Aug-17 23:49:32 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Aug-17 23:49:32 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Aug-17 23:49:32 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Aug-17 23:49:32 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Aug-17 23:49:32 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Aug-17 23:49:32 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Aug-17 23:49:32 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Aug-17 23:49:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:49:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:49:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:49:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:49:32 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Aug-17 23:49:32 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Aug-17 23:49:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-17 23:49:32 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2010-Aug-17 23:49:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Aug-17 23:49:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Aug-17 23:49:32 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-17 23:49:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-17 23:49:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-17 23:49:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-17 23:49:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-17 23:49:32 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2010-Aug-17 23:49:32 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-Aug-17 23:49:32 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Aug-17 23:49:32 LOG5 finish_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Aug-17 23:49:32 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Aug-17 23:49:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-17 23:49:33 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Aug-17 23:49:33 LOG5 end_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2010-Aug-17 23:49:33 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Aug-17 23:49:33 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2010-Aug-17 23:49:33 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2010-Aug-17 23:49:33 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-17 23:49:33 LOG5 begin_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Aug-17 23:49:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-17 23:49:33 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-17 23:49:33 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Aug-17 23:49:33 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-17 23:49:33 LOG5 finish_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Aug-17 23:49:33 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-17 23:49:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-17 23:49:33 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-17 23:49:33 LOG5 end_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2010-Aug-17 23:49:33 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2010.conf' applied. 2010-Aug-17 23:49:34 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-17 23:49:34 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-17 23:52:51 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Aug-17 23:52:51 LOG4 exec_msg: From OBSERVER: track_new_source drift92p1 211100.0 +221554 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2010-Aug-17 23:52:51 LOG1 track_new_source: Calling 'track_new_source drift92p1 211100.0 +221554 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2010-Aug-17 23:52:51 BEGIN begin_task: Starting task 'selecting new source' 2010-Aug-17 23:52:51 LOG5 begin_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2010-Aug-17 23:52:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift92p1} INFO {Selecting source 'drift92p1' ...} 2010-Aug-17 23:52:51 LOG3 track_source: Calling 'track_source drift92p1 211100.0 +221554 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2010-Aug-17 23:52:51 START begin_task: Starting task 'sending tracking commands' 2010-Aug-17 23:52:51 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Aug-17 23:52:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift92p1} INFO {Slewing to source 'drift92p1' ...} 2010-Aug-17 23:52:51 INFO1 track_source: Starting to track drift92p1 2010-Aug-17 23:52:51 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift92p1" 2010-Aug-17 23:52:51 LOG3 vw_send: To DATATAKING: set ra 211100.0 2010-Aug-17 23:52:51 LOG3 vw_send: To DATATAKING: set dec +221554 2010-Aug-17 23:52:51 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-17 23:52:51 LOG3 vw_send: To DATATAKING: pnt tr 211100.0 +221554 -CJ 2010-Aug-17 23:52:51 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-17 23:52:51 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-17 23:52:51 LOG5 finish_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Aug-17 23:52:51 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-17 23:52:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:52:51 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-17 23:52:51 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2010-Aug-17 23:52:51 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2010-Aug-17 23:52:51 START begin_task: Starting task 'applying pointing corrections' 2010-Aug-17 23:52:51 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Aug-17 23:52:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Aug-17 23:52:51 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Aug-17 23:52:51 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Aug-17 23:52:51 LOG5 finish_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Aug-17 23:52:51 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Aug-17 23:52:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:52:51 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Aug-17 23:52:51 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Aug-17 23:52:51 STOP finish_task: Finishing task 'selecting new source' 2010-Aug-17 23:52:51 LOG5 finish_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2010-Aug-17 23:52:51 DONE finish_task: DONE finished selecting: new source 2010-Aug-17 23:52:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-17 23:52:51 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Aug-17 23:52:51 LOG5 end_task: Level: (1) ID = <10109> Status = 0 0 0 0 ok 2010-Aug-17 23:52:51 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift92p1" 2010-Aug-17 23:52:51 LOG4 got_cormsg: From DATATAKING: set ra 211100.0 2010-Aug-17 23:52:51 LOG4 got_cormsg: From DATATAKING: set dec +221554 2010-Aug-17 23:52:51 LOG4 got_cormsg: From DATATAKING: vw% 211100.0 2010-Aug-17 23:52:51 LOG4 got_cormsg: From DATATAKING: vw% +221554 2010-Aug-17 23:52:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:52:51 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-17 23:52:51 LOG4 got_cormsg: From DATATAKING: pnt tr 211100.0 +221554 -CJ 2010-Aug-17 23:52:51 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-17 23:52:51 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-17 23:52:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:52:51 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Aug-17 23:52:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:54:24 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Aug-17 23:54:24 LOG4 exec_msg: From OBSERVER: track_new_source drift92p1 211300.0 +221554 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2010-Aug-17 23:54:24 LOG1 track_new_source: Calling 'track_new_source drift92p1 211300.0 +221554 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2010-Aug-17 23:54:24 BEGIN begin_task: Starting task 'selecting new source' 2010-Aug-17 23:54:24 LOG5 begin_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2010-Aug-17 23:54:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift92p1} INFO {Selecting source 'drift92p1' ...} 2010-Aug-17 23:54:24 LOG3 track_source: Calling 'track_source drift92p1 211300.0 +221554 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2010-Aug-17 23:54:24 START begin_task: Starting task 'sending tracking commands' 2010-Aug-17 23:54:24 LOG5 begin_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Aug-17 23:54:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift92p1} INFO {Slewing to source 'drift92p1' ...} 2010-Aug-17 23:54:24 INFO1 track_source: Starting to track drift92p1 2010-Aug-17 23:54:24 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift92p1" 2010-Aug-17 23:54:24 LOG3 vw_send: To DATATAKING: set ra 211300.0 2010-Aug-17 23:54:24 LOG3 vw_send: To DATATAKING: set dec +221554 2010-Aug-17 23:54:24 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-17 23:54:24 LOG3 vw_send: To DATATAKING: pnt tr 211300.0 +221554 -CJ 2010-Aug-17 23:54:24 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-17 23:54:24 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-17 23:54:24 LOG5 finish_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Aug-17 23:54:24 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-17 23:54:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:54:24 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-17 23:54:24 LOG5 end_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Aug-17 23:54:24 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2010-Aug-17 23:54:24 START begin_task: Starting task 'applying pointing corrections' 2010-Aug-17 23:54:24 LOG5 begin_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-Aug-17 23:54:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Aug-17 23:54:24 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Aug-17 23:54:24 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Aug-17 23:54:24 LOG5 finish_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-Aug-17 23:54:24 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Aug-17 23:54:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:54:25 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Aug-17 23:54:25 LOG5 end_task: Level: (2) ID = <10114> Status = 0 0 0 0 ok 2010-Aug-17 23:54:25 STOP finish_task: Finishing task 'selecting new source' 2010-Aug-17 23:54:25 LOG5 finish_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2010-Aug-17 23:54:25 DONE finish_task: DONE finished selecting: new source 2010-Aug-17 23:54:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-17 23:54:25 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Aug-17 23:54:25 LOG5 end_task: Level: (1) ID = <10112> Status = 0 0 0 0 ok 2010-Aug-17 23:54:25 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift92p1" 2010-Aug-17 23:54:25 LOG4 got_cormsg: From DATATAKING: set ra 211300.0 2010-Aug-17 23:54:25 LOG4 got_cormsg: From DATATAKING: set dec +221554 2010-Aug-17 23:54:25 LOG4 got_cormsg: From DATATAKING: vw% 211300.0 2010-Aug-17 23:54:25 LOG4 got_cormsg: From DATATAKING: vw% +221554 2010-Aug-17 23:54:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:54:25 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-17 23:54:25 LOG4 got_cormsg: From DATATAKING: pnt tr 211300.0 +221554 -CJ 2010-Aug-17 23:54:25 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-17 23:54:25 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-17 23:54:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:54:25 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Aug-17 23:54:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:54:53 COMMAND CIMA-send_to_exec: Sending command to point to a source 2010-Aug-17 23:54:53 LOG4 exec_msg: From OBSERVER: track_new_source drift92p1 211300.0 +221554 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2010-Aug-17 23:54:53 LOG1 track_new_source: Calling 'track_new_source drift92p1 211300.0 +221554 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2010-Aug-17 23:54:53 BEGIN begin_task: Starting task 'selecting new source' 2010-Aug-17 23:54:53 LOG5 begin_task: Level: (1) ID = <10115> Status = 0 0 0 0 ok 2010-Aug-17 23:54:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift92p1} INFO {Selecting source 'drift92p1' ...} 2010-Aug-17 23:54:53 LOG3 track_source: Calling 'track_source drift92p1 211300.0 +221554 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2010-Aug-17 23:54:53 START begin_task: Starting task 'sending tracking commands' 2010-Aug-17 23:54:53 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2010-Aug-17 23:54:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift92p1} INFO {Slewing to source 'drift92p1' ...} 2010-Aug-17 23:54:53 INFO1 track_source: Starting to track drift92p1 2010-Aug-17 23:54:53 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift92p1" 2010-Aug-17 23:54:53 LOG3 vw_send: To DATATAKING: set ra 211300.0 2010-Aug-17 23:54:53 LOG3 vw_send: To DATATAKING: set dec +221554 2010-Aug-17 23:54:53 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-17 23:54:53 LOG3 vw_send: To DATATAKING: pnt tr 211300.0 +221554 -CJ 2010-Aug-17 23:54:53 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-17 23:54:53 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-17 23:54:53 LOG5 finish_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2010-Aug-17 23:54:53 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-17 23:54:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:54:53 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-17 23:54:53 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2010-Aug-17 23:54:53 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2010-Aug-17 23:54:53 START begin_task: Starting task 'applying pointing corrections' 2010-Aug-17 23:54:53 LOG5 begin_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-Aug-17 23:54:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2010-Aug-17 23:54:53 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2010-Aug-17 23:54:53 STOP finish_task: Finishing task 'applying pointing corrections' 2010-Aug-17 23:54:53 LOG5 finish_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-Aug-17 23:54:53 INFO2 finish_task: DONE finished applying: pointing corrections 2010-Aug-17 23:54:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:54:53 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2010-Aug-17 23:54:53 LOG5 end_task: Level: (2) ID = <10117> Status = 0 0 0 0 ok 2010-Aug-17 23:54:53 STOP finish_task: Finishing task 'selecting new source' 2010-Aug-17 23:54:53 LOG5 finish_task: Level: (1) ID = <10115> Status = 0 0 0 0 ok 2010-Aug-17 23:54:53 DONE finish_task: DONE finished selecting: new source 2010-Aug-17 23:54:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-17 23:54:53 END end_task: Finishing task 'selecting new source' with status 'OK' 2010-Aug-17 23:54:53 LOG5 end_task: Level: (1) ID = <10115> Status = 0 0 0 0 ok 2010-Aug-17 23:54:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift92p1" 2010-Aug-17 23:54:54 LOG4 got_cormsg: From DATATAKING: set ra 211300.0 2010-Aug-17 23:54:54 LOG4 got_cormsg: From DATATAKING: set dec +221554 2010-Aug-17 23:54:54 LOG4 got_cormsg: From DATATAKING: vw% 211300.0 2010-Aug-17 23:54:54 LOG4 got_cormsg: From DATATAKING: vw% +221554 2010-Aug-17 23:54:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:54:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-17 23:54:54 LOG4 got_cormsg: From DATATAKING: pnt tr 211300.0 +221554 -CJ 2010-Aug-17 23:54:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-17 23:54:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Aug-17 23:54:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:54:54 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2010-Aug-17 23:54:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:54:57 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2010-Aug-17 23:54:57 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2010-Aug-17 23:54:57 BEGIN begin_task: Starting task 'adjusting WAPP power' 2010-Aug-17 23:54:57 LOG5 begin_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2010-Aug-17 23:54:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Aug-17 23:54:57 INFO2 adjust_power: Starting to adjust WAPP power 2010-Aug-17 23:54:57 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Aug-17 23:54:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Aug-17 23:54:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:54:57 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Aug-17 23:54:57 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2010-Aug-17 23:54:57 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Aug-17 23:54:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:55:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:55:00 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-17 23:55:00 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Aug-17 23:55:00 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2010-Aug-17 23:55:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Aug-17 23:55:00 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-17 23:55:00 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Aug-17 23:55:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Aug-17 23:55:00 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-17 23:55:00 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-17 23:55:00 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-17 23:55:00 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-17 23:55:00 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Aug-17 23:55:00 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-Aug-17 23:55:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Aug-17 23:55:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:55:00 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Aug-17 23:55:00 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 3 3 dB 2010-Aug-17 23:55:00 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 5 dB 2010-Aug-17 23:55:00 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Aug-17 23:55:00 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Aug-17 23:55:00 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Aug-17 23:55:00 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-Aug-17 23:55:00 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.899 0.968 ALFA beam 1: 0.945 0.999 2010-Aug-17 23:55:00 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.969 0.915 ALFA beam 3: 1.063 0.971 2010-Aug-17 23:55:00 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.094 0.875 ALFA beam 5: 1.091 1.091 2010-Aug-17 23:55:00 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.897 0.850 ALFA beam 7: 0.986 1.007 2010-Aug-17 23:55:00 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-17 23:55:00 LOG5 finish_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Aug-17 23:55:00 INFO2 finish_task: DONE finished adjusting: WAPP power 2010-Aug-17 23:55:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:55:01 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-17 23:55:01 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2010-Aug-17 23:55:01 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2010-Aug-17 23:55:01 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-17 23:55:01 LOG5 finish_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2010-Aug-17 23:55:01 DONE finish_task: DONE finished adjusting: WAPP power levels 2010-Aug-17 23:55:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Aug-17 23:55:01 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-17 23:55:01 LOG5 end_task: Level: (1) ID = <10118> Status = 0 0 0 0 ok 2010-Aug-17 23:55:03 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2010-Aug-17 23:55:03 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift92p1 211300.0 +221554 J 0 Topocentric velocity(optical) 2010-Aug-17 23:55:03 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift92p1 211300.0 +221554 J 0 Topocentric velocity(optical)' 2010-Aug-17 23:55:03 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Aug-17 23:55:03 LOG5 begin_task: Level: (1) ID = <10122> Status = 0 0 0 0 ok 2010-Aug-17 23:55:03 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift92p1' 2010-Aug-17 23:55:03 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Aug-17 23:55:03 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift92p1} 2010-Aug-17 23:55:03 INFO5 fixed_driftmap: Start: year = 2010.6296962379902 RA = 21:13:31.1 Dec = +22:18:44.3 2010-Aug-17 23:55:03 NOTE fixed_driftmap: Setting ZA to 3:57:30.6 ... 2010-Aug-17 23:55:03 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 3.96 2010-Aug-17 23:55:03 LOG3 track_source: Calling 'track_source drift92p1 180.0 3.9584997042 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-Aug-17 23:55:03 START begin_task: Starting task 'sending tracking commands' 2010-Aug-17 23:55:03 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Aug-17 23:55:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift92p1} INFO {Slewing to source 'drift92p1' ...} 2010-Aug-17 23:55:03 INFO1 track_source: Starting to track drift92p1 2010-Aug-17 23:55:03 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift92p1" 2010-Aug-17 23:55:03 LOG3 vw_send: To DATATAKING: set ra 180.0 2010-Aug-17 23:55:03 LOG3 vw_send: To DATATAKING: set dec 3.9584997042 2010-Aug-17 23:55:03 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Aug-17 23:55:03 LOG3 vw_send: To DATATAKING: pnt tr 180.0 3.9584997042 -CF 2010-Aug-17 23:55:03 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Aug-17 23:55:03 STOP finish_task: Finishing task 'sending tracking commands' 2010-Aug-17 23:55:03 LOG5 finish_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Aug-17 23:55:03 INFO2 finish_task: DONE finished sending: tracking commands 2010-Aug-17 23:55:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:55:03 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Aug-17 23:55:03 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2010-Aug-17 23:55:03 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Aug-17 23:55:03 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2010-Aug-17 23:55:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Aug-17 23:55:03 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Aug-17 23:55:03 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2010-Aug-17 23:55:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Aug-17 23:55:03 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Aug-17 23:55:03 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Aug-17 23:55:03 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift92p1" 2010-Aug-17 23:55:03 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2010-Aug-17 23:55:03 LOG4 got_cormsg: From DATATAKING: set dec 3.9584997042 2010-Aug-17 23:55:03 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2010-Aug-17 23:55:03 LOG4 got_cormsg: From DATATAKING: vw% 3.9584997042 2010-Aug-17 23:55:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:55:03 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Aug-17 23:55:03 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 3.9584997042 -CF 2010-Aug-17 23:55:03 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Aug-17 23:55:03 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2010-Aug-17 23:55:04 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Aug-17 23:55:04 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Aug-17 23:55:04 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Aug-17 23:55:04 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Aug-17 23:55:04 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-17 23:55:04 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Aug-17 23:55:04 LOG5 finish_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2010-Aug-17 23:55:04 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Aug-17 23:55:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:55:04 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Aug-17 23:55:04 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2010-Aug-17 23:55:04 START begin_task: Starting task 'waiting on telescope' 2010-Aug-17 23:55:04 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2010-Aug-17 23:55:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Aug-17 23:55:04 LOG3 waittrk: Start waittrk 5 2010-Aug-17 23:55:04 START begin_task: Starting task 'waiting on telescope movement' 2010-Aug-17 23:55:04 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-Aug-17 23:55:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Aug-17 23:55:09 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2010-Aug-17 23:55:09 START begin_task: Starting task 'waiting on telescope on source' 2010-Aug-17 23:55:09 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Aug-17 23:55:19 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Aug-17 23:55:19 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2010-Aug-17 23:55:19 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Aug-17 23:55:19 INFO2 waittrk: Now tracking drift92p1 2010-Aug-17 23:55:19 LOG4 waittrk: Current telescope position: Az = 179.73 ZA = 3.98 2010-Aug-17 23:55:19 STOP finish_task: Finishing task 'waiting on telescope' 2010-Aug-17 23:55:19 LOG5 finish_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2010-Aug-17 23:55:19 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Aug-17 23:55:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:55:19 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Aug-17 23:55:19 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2010-Aug-17 23:55:19 START begin_task: Starting task 'selecting calibration type' 2010-Aug-17 23:55:19 LOG5 begin_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2010-Aug-17 23:55:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-17 23:55:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-17 23:55:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:55:19 START begin_task: Starting task 'waiting on setcal' 2010-Aug-17 23:55:19 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-Aug-17 23:55:19 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-17 23:55:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:55:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:55:19 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-17 23:55:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-17 23:55:19 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-Aug-17 23:55:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-17 23:55:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-17 23:55:19 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-17 23:55:19 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-17 23:55:19 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-Aug-17 23:55:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-17 23:55:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-17 23:55:19 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2010-Aug-17 23:55:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-17 23:55:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-17 23:55:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-17 23:55:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-17 23:55:19 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-17 23:55:19 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-Aug-17 23:55:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:55:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-17 23:55:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-17 23:55:19 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-Aug-17 23:55:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-17 23:55:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-17 23:55:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-17 23:55:19 LOG5 end_task: Level: (2) ID = <10129> Status = 0 0 0 0 ok 2010-Aug-17 23:55:19 LOG5 dopset_later: Calling 'dopset_later 0' 2010-Aug-17 23:55:19 INFO3 dopset_later: Setting Doppler correction now 2010-Aug-17 23:55:19 LOG5 antvel: Calling 'antvel 180.000000 3.958500 F Topocentric 0' 2010-Aug-17 23:55:19 LOG2 antvel: Transforming current Az = 180.00 ZA = 3.96 to apparent RA = 21:13:57.1 Dec = +22:18:44.3 2010-Aug-17 23:55:19 LOG2 antvel: Parameters to Doppler: Topocentric 100519 2010 229 0.0 2010-Aug-17 23:55:19 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Aug-17 23:55:19 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-Aug-17 23:55:19 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-Aug-17 23:55:19 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Aug-17 23:55:19 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Aug-17 23:55:19 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-17 23:55:19 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:55:19 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-17 23:55:19 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2010-Aug-17 23:55:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Aug-17 23:55:19 INFO2 adjust_power: Starting to adjust WAPP power 2010-Aug-17 23:55:19 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Aug-17 23:55:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Aug-17 23:55:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:55:19 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Aug-17 23:55:19 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-Aug-17 23:55:19 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Aug-17 23:55:19 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Aug-17 23:55:19 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Aug-17 23:55:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-17 23:55:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:55:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:55:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:55:22 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-17 23:55:22 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Aug-17 23:55:22 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-Aug-17 23:55:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Aug-17 23:55:22 START begin_task: Starting task 'adjusting WAPP power' 2010-Aug-17 23:55:22 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2010-Aug-17 23:55:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Aug-17 23:55:22 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-17 23:55:22 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-17 23:55:22 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-17 23:55:22 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Aug-17 23:55:22 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Aug-17 23:55:22 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-Aug-17 23:55:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Aug-17 23:55:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-17 23:55:23 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-Aug-17 23:55:23 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 3 3 dB 2010-Aug-17 23:55:23 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 5 dB 2010-Aug-17 23:55:23 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-Aug-17 23:55:23 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Aug-17 23:55:23 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Aug-17 23:55:23 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2010-Aug-17 23:55:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.890 0.947 ALFA beam 1: 0.946 0.999 2010-Aug-17 23:55:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.981 0.915 ALFA beam 3: 1.077 0.984 2010-Aug-17 23:55:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.109 0.893 ALFA beam 5: 1.095 1.100 2010-Aug-17 23:55:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.911 0.869 ALFA beam 7: 0.995 1.027 2010-Aug-17 23:55:23 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-17 23:55:23 LOG5 finish_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2010-Aug-17 23:55:23 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Aug-17 23:55:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:55:23 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-17 23:55:23 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2010-Aug-17 23:55:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-17 23:55:23 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Aug-17 23:55:23 LOG5 finish_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2010-Aug-17 23:55:23 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Aug-17 23:55:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-17 23:55:23 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Aug-17 23:55:23 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2010-Aug-17 23:55:23 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 21:13:31.1 LST = 21:14:01.1 diff = -30.0 secs 2010-Aug-17 23:55:23 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2010-Aug-17 23:55:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:55:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:55:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:55:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-17 23:55:23 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2010-Aug-17 23:55:23 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Aug-17 23:55:23 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-17 23:55:23 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-17 23:55:23 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-17 23:55:23 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2010-Aug-17 23:55:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-17 23:55:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-17 23:55:23 INFO2 take_data: Starting WAPP 600-second scan: 22900106 2010-Aug-17 23:55:24 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-17 23:55:24 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2010-Aug-17 23:55:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-17 23:55:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-17 23:55:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20100817.a2010.0001.fits 2010-Aug-17 23:55:24 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100817.a2010.0001.fits} 2010-Aug-17 23:55:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-17 23:55:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14125.00 2010-Aug-17 23:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-17 23:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-17 23:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-17 23:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-17 23:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-17 23:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-17 23:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 00:05:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 00:05:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 00:05:25 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2010-Aug-18 00:05:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 00:05:25 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2010-Aug-18 00:05:25 LOG1 fixed_driftmap: New position: year = 2010.6297159796688 RA = 21:23:34.5 RA/Dec = 21:24:05.8 +22:18:50.6 2010-Aug-18 00:05:25 NOTE fixed_driftmap: Correcting ZA to 3:57:36.9 ... 2010-Aug-18 00:05:25 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9602524135 -CF 2010-Aug-18 00:05:25 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 00:05:25 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 00:05:25 LOG5 begin_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2010-Aug-18 00:05:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 00:05:25 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 00:05:25 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Aug-18 00:05:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 00:05:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 00:05:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 00:05:25 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 00:05:25 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-Aug-18 00:05:25 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9602524135 -CF 2010-Aug-18 00:05:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:05:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 00:05:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 00:05:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:05:25 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 00:05:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 00:05:25 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2010-Aug-18 00:05:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 00:05:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 00:05:25 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 00:05:25 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 00:05:25 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2010-Aug-18 00:05:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:05:26 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 00:05:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 00:05:26 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2010-Aug-18 00:05:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 00:05:26 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 00:05:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 00:05:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 00:05:26 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 00:05:26 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2010-Aug-18 00:05:26 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 00:05:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 00:05:26 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2010-Aug-18 00:05:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 00:05:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 00:05:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 00:05:26 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Aug-18 00:05:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 00:05:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 00:05:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 00:05:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 00:05:26 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Aug-18 00:05:26 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 00:05:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 00:05:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 00:05:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 00:05:26 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2010-Aug-18 00:05:26 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 00:05:26 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 00:05:26 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Aug-18 00:05:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 00:05:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 00:05:26 INFO2 take_data: Starting WAPP 1-second scan: 23000001 2010-Aug-18 00:05:26 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 00:05:26 LOG5 begin_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-Aug-18 00:05:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 00:05:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 00:05:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14727.00 2010-Aug-18 00:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 00:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 00:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 00:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 00:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 00:05:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 00:05:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 00:05:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 00:05:28 LOG5 end_task: Level: (4) ID = <10146> Status = 0 0 0 0 ok 2010-Aug-18 00:05:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 00:05:28 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Aug-18 00:05:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 00:05:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 00:05:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 00:05:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 00:05:28 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2010-Aug-18 00:05:28 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 00:05:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 00:05:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 00:05:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 00:05:28 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2010-Aug-18 00:05:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 00:05:28 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 00:05:28 LOG5 finish_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2010-Aug-18 00:05:28 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 00:05:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 00:05:28 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 00:05:28 LOG5 end_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2010-Aug-18 00:05:28 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2010-Aug-18 00:05:28 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Aug-18 00:05:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:05:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:05:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:05:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:05:29 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 00:05:29 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 00:05:29 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 00:05:29 LOG5 begin_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2010-Aug-18 00:05:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 00:05:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 00:05:29 INFO2 take_data: Starting WAPP 600-second scan: 23000002 2010-Aug-18 00:05:29 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 00:05:29 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2010-Aug-18 00:05:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 00:05:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 00:05:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 00:05:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14730.00 2010-Aug-18 00:05:29 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0000.fits 2010-Aug-18 00:05:29 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0000.fits} 2010-Aug-18 00:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 00:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 00:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 00:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 00:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 00:05:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 00:12:30 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 00:12:30.297 (seconds: 750.297)!} 2010-Aug-18 00:12:30 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 00:12:30.297 (seconds: 750.297)! 2010-Aug-18 00:12:31 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 749.0 to 750.0! 2010-Aug-18 00:12:32 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (749.0 - 751.0)! 2010-Aug-18 00:15:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 00:15:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 00:15:30 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2010-Aug-18 00:15:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 00:15:30 LOG5 end_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2010-Aug-18 00:15:30 LOG1 fixed_driftmap: New position: year = 2010.629735150962 RA = 21:33:40.9 RA/Dec = 21:34:12.5 +22:18:56.3 2010-Aug-18 00:15:30 NOTE fixed_driftmap: Correcting ZA to 3:57:42.6 ... 2010-Aug-18 00:15:30 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9618335346 -CF 2010-Aug-18 00:15:30 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 00:15:30 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 00:15:30 LOG5 begin_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2010-Aug-18 00:15:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 00:15:30 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 00:15:30 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2010-Aug-18 00:15:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 00:15:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 00:15:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 00:15:30 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 00:15:30 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-Aug-18 00:15:30 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9618335346 -CF 2010-Aug-18 00:15:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:15:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 00:15:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 00:15:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:15:30 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 00:15:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 00:15:30 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2010-Aug-18 00:15:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 00:15:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 00:15:30 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 00:15:30 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 00:15:30 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2010-Aug-18 00:15:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:15:31 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 00:15:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 00:15:31 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2010-Aug-18 00:15:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 00:15:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 00:15:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 00:15:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 00:15:31 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 00:15:31 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2010-Aug-18 00:15:31 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 00:15:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 00:15:31 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2010-Aug-18 00:15:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 00:15:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 00:15:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 00:15:31 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2010-Aug-18 00:15:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 00:15:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 00:15:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 00:15:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 00:15:31 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-Aug-18 00:15:31 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 00:15:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 00:15:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 00:15:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 00:15:31 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2010-Aug-18 00:15:31 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 00:15:31 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 00:15:31 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-Aug-18 00:15:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 00:15:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 00:15:31 INFO2 take_data: Starting WAPP 1-second scan: 23000003 2010-Aug-18 00:15:31 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 00:15:31 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-Aug-18 00:15:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 00:15:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 00:15:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15332.00 2010-Aug-18 00:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 00:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 00:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 00:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 00:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 00:15:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 00:15:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 00:15:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 00:15:33 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2010-Aug-18 00:15:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 00:15:33 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-Aug-18 00:15:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 00:15:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 00:15:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 00:15:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 00:15:33 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-Aug-18 00:15:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 00:15:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 00:15:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 00:15:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 00:15:34 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-Aug-18 00:15:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 00:15:34 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 00:15:34 LOG5 finish_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2010-Aug-18 00:15:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 00:15:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 00:15:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 00:15:34 LOG5 end_task: Level: (2) ID = <10150> Status = 0 0 0 0 ok 2010-Aug-18 00:15:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2010-Aug-18 00:15:34 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2010-Aug-18 00:15:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:15:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:15:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:15:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:15:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 00:15:34 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 00:15:34 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 00:15:34 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2010-Aug-18 00:15:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 00:15:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 00:15:34 INFO2 take_data: Starting WAPP 600-second scan: 23000004 2010-Aug-18 00:15:34 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 00:15:34 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2010-Aug-18 00:15:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 00:15:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 00:15:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 00:15:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15335.00 2010-Aug-18 00:15:34 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0001.fits 2010-Aug-18 00:15:34 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0001.fits} 2010-Aug-18 00:15:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 00:15:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:15:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:15:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 00:15:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:15:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 00:15:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 00:15:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 00:15:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 00:25:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 00:25:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 00:25:35 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2010-Aug-18 00:25:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 00:25:35 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2010-Aug-18 00:25:35 LOG1 fixed_driftmap: New position: year = 2010.6297543222552 RA = 21:43:47.4 RA/Dec = 21:44:19.1 +22:19:01.7 2010-Aug-18 00:25:35 NOTE fixed_driftmap: Correcting ZA to 3:57:48.0 ... 2010-Aug-18 00:25:35 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9633194944 -CF 2010-Aug-18 00:25:35 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 00:25:35 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 00:25:35 LOG5 begin_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2010-Aug-18 00:25:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 00:25:35 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 00:25:35 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Aug-18 00:25:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 00:25:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 00:25:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 00:25:35 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 00:25:35 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-Aug-18 00:25:35 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9633194944 -CF 2010-Aug-18 00:25:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:25:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 00:25:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 00:25:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:25:36 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 00:25:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 00:25:36 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2010-Aug-18 00:25:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 00:25:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 00:25:36 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 00:25:36 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 00:25:36 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-Aug-18 00:25:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:25:36 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 00:25:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 00:25:36 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-Aug-18 00:25:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 00:25:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 00:25:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 00:25:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 00:25:36 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 00:25:36 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2010-Aug-18 00:25:36 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 00:25:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 00:25:36 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2010-Aug-18 00:25:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 00:25:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 00:25:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 00:25:36 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Aug-18 00:25:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 00:25:36 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 00:25:36 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 00:25:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 00:25:36 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-Aug-18 00:25:36 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 00:25:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 00:25:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 00:25:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 00:25:36 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2010-Aug-18 00:25:36 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 00:25:36 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 00:25:36 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-Aug-18 00:25:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 00:25:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 00:25:36 INFO2 take_data: Starting WAPP 1-second scan: 23000005 2010-Aug-18 00:25:37 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 00:25:37 LOG5 begin_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2010-Aug-18 00:25:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 00:25:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 00:25:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15938.00 2010-Aug-18 00:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 00:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 00:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 00:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 00:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 00:25:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 00:25:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 00:25:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 00:25:39 LOG5 end_task: Level: (4) ID = <10168> Status = 0 0 0 0 ok 2010-Aug-18 00:25:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 00:25:39 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-Aug-18 00:25:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 00:25:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 00:25:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 00:25:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 00:25:39 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Aug-18 00:25:39 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 00:25:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 00:25:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 00:25:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 00:25:39 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Aug-18 00:25:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 00:25:39 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 00:25:39 LOG5 finish_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2010-Aug-18 00:25:39 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 00:25:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 00:25:39 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 00:25:39 LOG5 end_task: Level: (2) ID = <10161> Status = 0 0 0 0 ok 2010-Aug-18 00:25:39 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2010-Aug-18 00:25:39 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2010-Aug-18 00:25:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:25:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:25:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:25:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:25:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 00:25:40 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 00:25:40 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 00:25:40 LOG5 begin_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2010-Aug-18 00:25:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 00:25:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 00:25:40 INFO2 take_data: Starting WAPP 600-second scan: 23000006 2010-Aug-18 00:25:40 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 00:25:40 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2010-Aug-18 00:25:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 00:25:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 00:25:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 00:25:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15941.00 2010-Aug-18 00:25:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0002.fits 2010-Aug-18 00:25:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0002.fits} 2010-Aug-18 00:25:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 00:25:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:25:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:25:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 00:25:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:25:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 00:25:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 00:25:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 00:25:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 00:35:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 00:35:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 00:35:41 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2010-Aug-18 00:35:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 00:35:41 LOG5 end_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2010-Aug-18 00:35:41 LOG1 fixed_driftmap: New position: year = 2010.6297735252365 RA = 21:53:54.8 RA/Dec = 21:54:26.8 +22:19:06.7 2010-Aug-18 00:35:41 NOTE fixed_driftmap: Correcting ZA to 3:57:53.0 ... 2010-Aug-18 00:35:41 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9647096273 -CF 2010-Aug-18 00:35:41 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 00:35:41 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 00:35:41 LOG5 begin_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2010-Aug-18 00:35:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 00:35:41 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 00:35:41 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Aug-18 00:35:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 00:35:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 00:35:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 00:35:41 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 00:35:41 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Aug-18 00:35:41 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9647096273 -CF 2010-Aug-18 00:35:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:35:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 00:35:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 00:35:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:35:41 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 00:35:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 00:35:41 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2010-Aug-18 00:35:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 00:35:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 00:35:41 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 00:35:41 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 00:35:41 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2010-Aug-18 00:35:42 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:35:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 00:35:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 00:35:42 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2010-Aug-18 00:35:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 00:35:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 00:35:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 00:35:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 00:35:42 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 00:35:42 LOG5 begin_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2010-Aug-18 00:35:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 00:35:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 00:35:42 LOG5 end_task: Level: (4) ID = <10176> Status = 0 0 0 0 ok 2010-Aug-18 00:35:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 00:35:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 00:35:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 00:35:42 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Aug-18 00:35:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 00:35:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 00:35:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 00:35:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 00:35:42 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Aug-18 00:35:42 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 00:35:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 00:35:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 00:35:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 00:35:42 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2010-Aug-18 00:35:42 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 00:35:42 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 00:35:42 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-Aug-18 00:35:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 00:35:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 00:35:42 INFO2 take_data: Starting WAPP 1-second scan: 23000007 2010-Aug-18 00:35:42 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 00:35:42 LOG5 begin_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2010-Aug-18 00:35:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 00:35:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 00:35:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16543.00 2010-Aug-18 00:35:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 00:35:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:35:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:35:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 00:35:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:35:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 00:35:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 00:35:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 00:35:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 00:35:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 00:35:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 00:35:44 LOG5 end_task: Level: (4) ID = <10179> Status = 0 0 0 0 ok 2010-Aug-18 00:35:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 00:35:44 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-Aug-18 00:35:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 00:35:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 00:35:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 00:35:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 00:35:44 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2010-Aug-18 00:35:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 00:35:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 00:35:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 00:35:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 00:35:44 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2010-Aug-18 00:35:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 00:35:44 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 00:35:44 LOG5 finish_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2010-Aug-18 00:35:44 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 00:35:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 00:35:44 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 00:35:44 LOG5 end_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2010-Aug-18 00:35:44 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2010-Aug-18 00:35:44 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2010-Aug-18 00:35:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:35:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:35:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:35:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:35:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 00:35:45 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 00:35:45 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 00:35:45 LOG5 begin_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2010-Aug-18 00:35:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 00:35:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 00:35:45 INFO2 take_data: Starting WAPP 600-second scan: 23000008 2010-Aug-18 00:35:45 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 00:35:45 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2010-Aug-18 00:35:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 00:35:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 00:35:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 00:35:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16546.00 2010-Aug-18 00:35:45 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0003.fits 2010-Aug-18 00:35:45 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0003.fits} 2010-Aug-18 00:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 00:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 00:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 00:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 00:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 00:35:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 00:45:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 00:45:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 00:45:46 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2010-Aug-18 00:45:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 00:45:46 LOG5 end_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2010-Aug-18 00:45:46 LOG1 fixed_driftmap: New position: year = 2010.6297926965294 RA = 22:04:01.3 RA/Dec = 22:04:33.5 +22:19:11.3 2010-Aug-18 00:45:46 NOTE fixed_driftmap: Correcting ZA to 3:57:57.6 ... 2010-Aug-18 00:45:46 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9659966397 -CF 2010-Aug-18 00:45:46 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 00:45:46 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 00:45:46 LOG5 begin_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2010-Aug-18 00:45:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 00:45:46 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 00:45:46 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Aug-18 00:45:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 00:45:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 00:45:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 00:45:46 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 00:45:46 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-Aug-18 00:45:46 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9659966397 -CF 2010-Aug-18 00:45:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:45:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 00:45:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 00:45:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:45:46 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 00:45:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 00:45:46 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2010-Aug-18 00:45:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 00:45:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 00:45:46 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 00:45:46 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 00:45:46 LOG5 begin_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2010-Aug-18 00:45:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:45:47 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 00:45:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 00:45:47 LOG5 end_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2010-Aug-18 00:45:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 00:45:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 00:45:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 00:45:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 00:45:47 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 00:45:47 LOG5 begin_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2010-Aug-18 00:45:47 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 00:45:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 00:45:47 LOG5 end_task: Level: (4) ID = <10187> Status = 0 0 0 0 ok 2010-Aug-18 00:45:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 00:45:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 00:45:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 00:45:47 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Aug-18 00:45:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 00:45:47 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 00:45:47 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 00:45:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 00:45:47 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Aug-18 00:45:47 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 00:45:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 00:45:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 00:45:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 00:45:47 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2010-Aug-18 00:45:47 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 00:45:47 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 00:45:47 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-Aug-18 00:45:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 00:45:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 00:45:47 INFO2 take_data: Starting WAPP 1-second scan: 23000009 2010-Aug-18 00:45:47 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 00:45:47 LOG5 begin_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2010-Aug-18 00:45:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 00:45:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 00:45:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17148.00 2010-Aug-18 00:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 00:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 00:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 00:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 00:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 00:45:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 00:45:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 00:45:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 00:45:49 LOG5 end_task: Level: (4) ID = <10190> Status = 0 0 0 0 ok 2010-Aug-18 00:45:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 00:45:49 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-Aug-18 00:45:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 00:45:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 00:45:49 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 00:45:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 00:45:49 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2010-Aug-18 00:45:49 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 00:45:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 00:45:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 00:45:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 00:45:49 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2010-Aug-18 00:45:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 00:45:49 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 00:45:49 LOG5 finish_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2010-Aug-18 00:45:49 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 00:45:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 00:45:49 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 00:45:49 LOG5 end_task: Level: (2) ID = <10183> Status = 0 0 0 0 ok 2010-Aug-18 00:45:49 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2010-Aug-18 00:45:49 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2010-Aug-18 00:45:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:45:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:45:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:45:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:45:50 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 00:45:50 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 00:45:50 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 00:45:50 LOG5 begin_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2010-Aug-18 00:45:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 00:45:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 00:45:50 INFO2 take_data: Starting WAPP 600-second scan: 23000010 2010-Aug-18 00:45:50 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 00:45:50 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Aug-18 00:45:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 00:45:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 00:45:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 00:45:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17151.00 2010-Aug-18 00:45:50 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0004.fits 2010-Aug-18 00:45:50 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0004.fits} 2010-Aug-18 00:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 00:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 00:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 00:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 00:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 00:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 00:55:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 00:55:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 00:55:51 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2010-Aug-18 00:55:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 00:55:51 LOG5 end_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2010-Aug-18 00:55:51 LOG1 fixed_driftmap: New position: year = 2010.6298118678226 RA = 22:14:07.7 RA/Dec = 22:14:40.1 +22:19:15.6 2010-Aug-18 00:55:51 NOTE fixed_driftmap: Correcting ZA to 3:58:01.8 ... 2010-Aug-18 00:55:51 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9671803932 -CF 2010-Aug-18 00:55:51 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 00:55:51 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 00:55:51 LOG5 begin_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2010-Aug-18 00:55:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 00:55:51 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 00:55:51 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Aug-18 00:55:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 00:55:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 00:55:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 00:55:51 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 00:55:51 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2010-Aug-18 00:55:51 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9671803932 -CF 2010-Aug-18 00:55:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:55:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 00:55:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 00:55:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:55:51 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 00:55:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 00:55:51 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2010-Aug-18 00:55:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 00:55:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 00:55:51 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 00:55:51 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 00:55:51 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2010-Aug-18 00:55:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 00:55:53 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 00:55:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 00:55:53 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2010-Aug-18 00:55:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 00:55:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 00:55:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 00:55:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 00:55:53 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 00:55:53 LOG5 begin_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2010-Aug-18 00:55:53 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 00:55:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 00:55:53 LOG5 end_task: Level: (4) ID = <10198> Status = 0 0 0 0 ok 2010-Aug-18 00:55:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 00:55:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 00:55:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 00:55:53 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Aug-18 00:55:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 00:55:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 00:55:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 00:55:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 00:55:53 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2010-Aug-18 00:55:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 00:55:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 00:55:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 00:55:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 00:55:53 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2010-Aug-18 00:55:53 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 00:55:53 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 00:55:53 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2010-Aug-18 00:55:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 00:55:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 00:55:53 INFO2 take_data: Starting WAPP 1-second scan: 23000011 2010-Aug-18 00:55:53 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 00:55:53 LOG5 begin_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2010-Aug-18 00:55:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 00:55:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 00:55:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17754.00 2010-Aug-18 00:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 00:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 00:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 00:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 00:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 00:55:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 00:55:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 00:55:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 00:55:55 LOG5 end_task: Level: (4) ID = <10201> Status = 0 0 0 0 ok 2010-Aug-18 00:55:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 00:55:55 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2010-Aug-18 00:55:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 00:55:55 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 00:55:55 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 00:55:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 00:55:55 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2010-Aug-18 00:55:55 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 00:55:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 00:55:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 00:55:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 00:55:55 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2010-Aug-18 00:55:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 00:55:55 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 00:55:55 LOG5 finish_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2010-Aug-18 00:55:55 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 00:55:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 00:55:56 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 00:55:56 LOG5 end_task: Level: (2) ID = <10194> Status = 0 0 0 0 ok 2010-Aug-18 00:55:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2010-Aug-18 00:55:56 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2010-Aug-18 00:55:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:55:56 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:55:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:55:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 00:55:56 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 00:55:56 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 00:55:56 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 00:55:56 LOG5 begin_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2010-Aug-18 00:55:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 00:55:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 00:55:56 INFO2 take_data: Starting WAPP 600-second scan: 23000012 2010-Aug-18 00:55:56 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 00:55:56 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2010-Aug-18 00:55:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 00:55:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 00:55:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 00:55:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17757.00 2010-Aug-18 00:55:56 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0005.fits 2010-Aug-18 00:55:56 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0005.fits} 2010-Aug-18 00:55:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 00:55:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:55:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:55:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 00:55:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 00:55:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 00:55:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 00:55:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 00:55:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 01:05:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 01:05:57 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 01:05:57 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2010-Aug-18 01:05:57 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 01:05:57 LOG5 end_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2010-Aug-18 01:05:57 LOG1 fixed_driftmap: New position: year = 2010.6298310708039 RA = 22:24:15.1 RA/Dec = 22:24:47.8 +22:19:19.4 2010-Aug-18 01:05:57 NOTE fixed_driftmap: Correcting ZA to 3:58:05.7 ... 2010-Aug-18 01:05:57 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9682602902 -CF 2010-Aug-18 01:05:57 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 01:05:57 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 01:05:57 LOG5 begin_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2010-Aug-18 01:05:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 01:05:57 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 01:05:57 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Aug-18 01:05:57 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 01:05:57 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 01:05:57 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 01:05:57 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 01:05:57 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2010-Aug-18 01:05:57 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9682602902 -CF 2010-Aug-18 01:05:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:05:57 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 01:05:57 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 01:05:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:05:57 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 01:05:57 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 01:05:57 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2010-Aug-18 01:05:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 01:05:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 01:05:57 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 01:05:57 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 01:05:57 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2010-Aug-18 01:05:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:05:58 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 01:05:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 01:05:58 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2010-Aug-18 01:05:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 01:05:58 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 01:05:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 01:05:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 01:05:58 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 01:05:58 LOG5 begin_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2010-Aug-18 01:05:58 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 01:05:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 01:05:58 LOG5 end_task: Level: (4) ID = <10209> Status = 0 0 0 0 ok 2010-Aug-18 01:05:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 01:05:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 01:05:58 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 01:05:58 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Aug-18 01:05:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 01:05:58 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 01:05:58 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 01:05:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 01:05:58 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Aug-18 01:05:58 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 01:05:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 01:05:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 01:05:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 01:05:58 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2010-Aug-18 01:05:58 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 01:05:58 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 01:05:58 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2010-Aug-18 01:05:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 01:05:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 01:05:58 INFO2 take_data: Starting WAPP 1-second scan: 23000013 2010-Aug-18 01:05:58 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 01:05:58 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2010-Aug-18 01:05:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 01:05:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 01:05:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18359.00 2010-Aug-18 01:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 01:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 01:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 01:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 01:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 01:06:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 01:06:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 01:06:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 01:06:00 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2010-Aug-18 01:06:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 01:06:00 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2010-Aug-18 01:06:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 01:06:00 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 01:06:00 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 01:06:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 01:06:00 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2010-Aug-18 01:06:00 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 01:06:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 01:06:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 01:06:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 01:06:00 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2010-Aug-18 01:06:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 01:06:00 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 01:06:00 LOG5 finish_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2010-Aug-18 01:06:00 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 01:06:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 01:06:00 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 01:06:00 LOG5 end_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2010-Aug-18 01:06:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2010-Aug-18 01:06:01 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2010-Aug-18 01:06:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:06:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:06:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:06:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:06:01 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 01:06:01 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 01:06:01 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 01:06:01 LOG5 begin_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2010-Aug-18 01:06:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 01:06:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 01:06:01 INFO2 take_data: Starting WAPP 600-second scan: 23000014 2010-Aug-18 01:06:01 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 01:06:01 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2010-Aug-18 01:06:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 01:06:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 01:06:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 01:06:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18362.00 2010-Aug-18 01:06:01 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0006.fits 2010-Aug-18 01:06:01 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0006.fits} 2010-Aug-18 01:06:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 01:06:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:06:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:06:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 01:06:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:06:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 01:06:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 01:06:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 01:06:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 01:16:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 01:16:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 01:16:02 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2010-Aug-18 01:16:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 01:16:02 LOG5 end_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2010-Aug-18 01:16:02 LOG1 fixed_driftmap: New position: year = 2010.6298502420971 RA = 22:34:21.6 RA/Dec = 22:34:54.4 +22:19:22.9 2010-Aug-18 01:16:02 NOTE fixed_driftmap: Correcting ZA to 3:58:09.2 ... 2010-Aug-18 01:16:02 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9692306702 -CF 2010-Aug-18 01:16:02 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 01:16:02 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 01:16:02 LOG5 begin_task: Level: (2) ID = <10216> Status = 0 0 0 0 ok 2010-Aug-18 01:16:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 01:16:02 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 01:16:02 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-Aug-18 01:16:02 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 01:16:02 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 01:16:02 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 01:16:02 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 01:16:02 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2010-Aug-18 01:16:02 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9692306702 -CF 2010-Aug-18 01:16:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:16:02 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 01:16:02 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 01:16:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:16:02 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 01:16:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 01:16:02 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2010-Aug-18 01:16:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 01:16:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 01:16:03 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 01:16:03 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 01:16:03 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2010-Aug-18 01:16:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:16:03 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 01:16:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 01:16:03 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2010-Aug-18 01:16:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 01:16:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 01:16:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 01:16:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 01:16:03 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 01:16:03 LOG5 begin_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2010-Aug-18 01:16:03 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 01:16:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 01:16:03 LOG5 end_task: Level: (4) ID = <10220> Status = 0 0 0 0 ok 2010-Aug-18 01:16:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 01:16:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 01:16:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 01:16:03 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-Aug-18 01:16:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 01:16:03 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 01:16:03 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 01:16:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 01:16:03 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Aug-18 01:16:03 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 01:16:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 01:16:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 01:16:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 01:16:03 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2010-Aug-18 01:16:03 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 01:16:03 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 01:16:03 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2010-Aug-18 01:16:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 01:16:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 01:16:03 INFO2 take_data: Starting WAPP 1-second scan: 23000015 2010-Aug-18 01:16:03 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 01:16:03 LOG5 begin_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2010-Aug-18 01:16:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 01:16:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18964.00 2010-Aug-18 01:16:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 01:16:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 01:16:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:16:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:16:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 01:16:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:16:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 01:16:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 01:16:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 01:16:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 01:16:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 01:16:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 01:16:05 LOG5 end_task: Level: (4) ID = <10223> Status = 0 0 0 0 ok 2010-Aug-18 01:16:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 01:16:05 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2010-Aug-18 01:16:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 01:16:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 01:16:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 01:16:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 01:16:05 LOG5 begin_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2010-Aug-18 01:16:05 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 01:16:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 01:16:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 01:16:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 01:16:05 LOG5 end_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2010-Aug-18 01:16:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 01:16:05 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 01:16:05 LOG5 finish_task: Level: (2) ID = <10216> Status = 0 0 0 0 ok 2010-Aug-18 01:16:05 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 01:16:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 01:16:05 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 01:16:05 LOG5 end_task: Level: (2) ID = <10216> Status = 0 0 0 0 ok 2010-Aug-18 01:16:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2010-Aug-18 01:16:06 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2010-Aug-18 01:16:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:16:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:16:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:16:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:16:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 01:16:06 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 01:16:06 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 01:16:06 LOG5 begin_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2010-Aug-18 01:16:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 01:16:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 01:16:06 INFO2 take_data: Starting WAPP 600-second scan: 23000016 2010-Aug-18 01:16:06 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 01:16:06 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2010-Aug-18 01:16:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 01:16:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 01:16:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 01:16:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18967.00 2010-Aug-18 01:16:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0007.fits 2010-Aug-18 01:16:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0007.fits} 2010-Aug-18 01:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 01:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 01:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 01:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 01:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 01:16:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 01:26:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 01:26:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 01:26:07 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2010-Aug-18 01:26:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 01:26:07 LOG5 end_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2010-Aug-18 01:26:07 LOG1 fixed_driftmap: New position: year = 2010.6298694133902 RA = 22:44:28.0 RA/Dec = 22:45:01.1 +22:19:26.0 2010-Aug-18 01:26:07 NOTE fixed_driftmap: Correcting ZA to 3:58:12.3 ... 2010-Aug-18 01:26:07 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9700915017 -CF 2010-Aug-18 01:26:07 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 01:26:07 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 01:26:07 LOG5 begin_task: Level: (2) ID = <10227> Status = 0 0 0 0 ok 2010-Aug-18 01:26:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 01:26:07 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 01:26:07 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Aug-18 01:26:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 01:26:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 01:26:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 01:26:07 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 01:26:07 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2010-Aug-18 01:26:07 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9700915017 -CF 2010-Aug-18 01:26:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:26:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 01:26:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 01:26:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:26:07 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 01:26:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 01:26:07 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2010-Aug-18 01:26:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 01:26:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 01:26:07 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 01:26:07 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 01:26:07 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2010-Aug-18 01:26:07 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:26:08 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 01:26:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 01:26:08 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2010-Aug-18 01:26:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 01:26:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 01:26:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 01:26:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 01:26:08 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 01:26:08 LOG5 begin_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2010-Aug-18 01:26:08 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 01:26:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 01:26:08 LOG5 end_task: Level: (4) ID = <10231> Status = 0 0 0 0 ok 2010-Aug-18 01:26:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 01:26:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 01:26:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 01:26:08 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Aug-18 01:26:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 01:26:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 01:26:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 01:26:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 01:26:08 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Aug-18 01:26:09 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 01:26:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 01:26:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 01:26:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 01:26:09 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2010-Aug-18 01:26:09 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 01:26:09 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 01:26:09 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2010-Aug-18 01:26:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 01:26:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 01:26:09 INFO2 take_data: Starting WAPP 1-second scan: 23000017 2010-Aug-18 01:26:09 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 01:26:09 LOG5 begin_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2010-Aug-18 01:26:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 01:26:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 01:26:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19570.00 2010-Aug-18 01:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 01:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 01:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 01:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 01:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 01:26:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 01:26:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 01:26:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 01:26:11 LOG5 end_task: Level: (4) ID = <10234> Status = 0 0 0 0 ok 2010-Aug-18 01:26:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 01:26:11 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2010-Aug-18 01:26:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 01:26:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 01:26:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 01:26:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 01:26:11 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2010-Aug-18 01:26:11 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 01:26:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 01:26:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 01:26:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 01:26:11 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2010-Aug-18 01:26:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 01:26:11 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 01:26:11 LOG5 finish_task: Level: (2) ID = <10227> Status = 0 0 0 0 ok 2010-Aug-18 01:26:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 01:26:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 01:26:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 01:26:11 LOG5 end_task: Level: (2) ID = <10227> Status = 0 0 0 0 ok 2010-Aug-18 01:26:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2010-Aug-18 01:26:11 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2010-Aug-18 01:26:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:26:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:26:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:26:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:26:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 01:26:12 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 01:26:12 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 01:26:12 LOG5 begin_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2010-Aug-18 01:26:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 01:26:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 01:26:12 INFO2 take_data: Starting WAPP 600-second scan: 23000018 2010-Aug-18 01:26:12 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 01:26:12 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2010-Aug-18 01:26:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 01:26:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 01:26:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 01:26:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19573.00 2010-Aug-18 01:26:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0008.fits 2010-Aug-18 01:26:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0008.fits} 2010-Aug-18 01:26:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 01:26:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:26:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:26:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 01:26:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:26:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 01:26:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 01:26:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 01:26:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 01:36:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 01:36:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 01:36:13 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2010-Aug-18 01:36:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 01:36:13 LOG5 end_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2010-Aug-18 01:36:13 LOG1 fixed_driftmap: New position: year = 2010.6298886163713 RA = 22:54:35.4 RA/Dec = 22:55:08.8 +22:19:28.7 2010-Aug-18 01:36:13 NOTE fixed_driftmap: Correcting ZA to 3:58:15.0 ... 2010-Aug-18 01:36:13 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9708422692 -CF 2010-Aug-18 01:36:13 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 01:36:13 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 01:36:13 LOG5 begin_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2010-Aug-18 01:36:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 01:36:13 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 01:36:13 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Aug-18 01:36:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 01:36:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 01:36:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 01:36:13 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 01:36:13 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2010-Aug-18 01:36:13 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9708422692 -CF 2010-Aug-18 01:36:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:36:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 01:36:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 01:36:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:36:13 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 01:36:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 01:36:13 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2010-Aug-18 01:36:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 01:36:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 01:36:13 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 01:36:13 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 01:36:13 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2010-Aug-18 01:36:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:36:14 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 01:36:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 01:36:14 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2010-Aug-18 01:36:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 01:36:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 01:36:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 01:36:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 01:36:14 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 01:36:14 LOG5 begin_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2010-Aug-18 01:36:14 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 01:36:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 01:36:14 LOG5 end_task: Level: (4) ID = <10242> Status = 0 0 0 0 ok 2010-Aug-18 01:36:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 01:36:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 01:36:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 01:36:14 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Aug-18 01:36:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 01:36:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 01:36:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 01:36:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 01:36:14 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2010-Aug-18 01:36:14 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 01:36:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 01:36:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 01:36:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 01:36:14 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2010-Aug-18 01:36:14 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 01:36:14 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 01:36:14 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2010-Aug-18 01:36:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 01:36:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 01:36:14 INFO2 take_data: Starting WAPP 1-second scan: 23000019 2010-Aug-18 01:36:14 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 01:36:14 LOG5 begin_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2010-Aug-18 01:36:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 01:36:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20175.00 2010-Aug-18 01:36:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 01:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 01:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 01:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 01:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 01:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 01:36:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 01:36:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 01:36:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 01:36:16 LOG5 end_task: Level: (4) ID = <10245> Status = 0 0 0 0 ok 2010-Aug-18 01:36:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 01:36:16 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2010-Aug-18 01:36:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 01:36:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 01:36:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 01:36:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 01:36:16 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2010-Aug-18 01:36:16 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 01:36:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 01:36:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 01:36:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 01:36:16 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2010-Aug-18 01:36:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 01:36:16 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 01:36:16 LOG5 finish_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2010-Aug-18 01:36:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 01:36:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 01:36:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 01:36:16 LOG5 end_task: Level: (2) ID = <10238> Status = 0 0 0 0 ok 2010-Aug-18 01:36:17 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2010-Aug-18 01:36:17 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2010-Aug-18 01:36:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:36:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:36:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:36:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:36:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 01:36:17 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 01:36:17 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 01:36:17 LOG5 begin_task: Level: (2) ID = <10247> Status = 0 0 0 0 ok 2010-Aug-18 01:36:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 01:36:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 01:36:17 INFO2 take_data: Starting WAPP 600-second scan: 23000020 2010-Aug-18 01:36:17 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 01:36:17 LOG5 begin_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2010-Aug-18 01:36:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 01:36:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 01:36:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20178.00 2010-Aug-18 01:36:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 01:36:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0009.fits 2010-Aug-18 01:36:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0009.fits} 2010-Aug-18 01:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 01:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 01:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 01:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 01:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 01:36:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 01:46:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 01:46:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 01:46:18 LOG5 end_task: Level: (3) ID = <10248> Status = 0 0 0 0 ok 2010-Aug-18 01:46:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 01:46:18 LOG5 end_task: Level: (2) ID = <10247> Status = 0 0 0 0 ok 2010-Aug-18 01:46:18 LOG1 fixed_driftmap: New position: year = 2010.6299077876645 RA = 23:04:41.8 RA/Dec = 23:05:15.4 +22:19:31.0 2010-Aug-18 01:46:18 NOTE fixed_driftmap: Correcting ZA to 3:58:17.3 ... 2010-Aug-18 01:46:18 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9714790288 -CF 2010-Aug-18 01:46:18 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 01:46:18 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 01:46:18 LOG5 begin_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2010-Aug-18 01:46:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 01:46:18 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 01:46:18 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2010-Aug-18 01:46:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 01:46:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 01:46:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 01:46:18 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 01:46:18 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2010-Aug-18 01:46:18 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9714790288 -CF 2010-Aug-18 01:46:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:46:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 01:46:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 01:46:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:46:18 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 01:46:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 01:46:18 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2010-Aug-18 01:46:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 01:46:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 01:46:19 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 01:46:19 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 01:46:19 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2010-Aug-18 01:46:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:46:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 01:46:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 01:46:19 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2010-Aug-18 01:46:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 01:46:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 01:46:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 01:46:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 01:46:19 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 01:46:19 LOG5 begin_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2010-Aug-18 01:46:19 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 01:46:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 01:46:19 LOG5 end_task: Level: (4) ID = <10253> Status = 0 0 0 0 ok 2010-Aug-18 01:46:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 01:46:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 01:46:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 01:46:19 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2010-Aug-18 01:46:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 01:46:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 01:46:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 01:46:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 01:46:19 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2010-Aug-18 01:46:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 01:46:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 01:46:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 01:46:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 01:46:19 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2010-Aug-18 01:46:19 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 01:46:19 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 01:46:19 LOG5 begin_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2010-Aug-18 01:46:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 01:46:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 01:46:19 INFO2 take_data: Starting WAPP 1-second scan: 23000021 2010-Aug-18 01:46:19 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 01:46:19 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2010-Aug-18 01:46:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 01:46:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 01:46:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20780.00 2010-Aug-18 01:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 01:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 01:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 01:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 01:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 01:46:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 01:46:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 01:46:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 01:46:21 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2010-Aug-18 01:46:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 01:46:21 LOG5 end_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2010-Aug-18 01:46:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 01:46:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 01:46:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 01:46:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 01:46:21 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2010-Aug-18 01:46:21 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 01:46:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 01:46:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 01:46:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 01:46:21 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2010-Aug-18 01:46:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 01:46:21 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 01:46:21 LOG5 finish_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2010-Aug-18 01:46:21 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 01:46:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 01:46:21 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 01:46:21 LOG5 end_task: Level: (2) ID = <10249> Status = 0 0 0 0 ok 2010-Aug-18 01:46:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2010-Aug-18 01:46:21 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2010-Aug-18 01:46:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:46:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:46:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:46:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:46:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 01:46:22 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 01:46:22 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 01:46:22 LOG5 begin_task: Level: (2) ID = <10258> Status = 0 0 0 0 ok 2010-Aug-18 01:46:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 01:46:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 01:46:22 INFO2 take_data: Starting WAPP 600-second scan: 23000022 2010-Aug-18 01:46:22 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 01:46:22 LOG5 begin_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2010-Aug-18 01:46:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 01:46:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 01:46:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 01:46:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20783.00 2010-Aug-18 01:46:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0010.fits 2010-Aug-18 01:46:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0010.fits} 2010-Aug-18 01:46:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 01:46:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:46:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:46:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 01:46:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:46:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 01:46:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 01:46:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 01:46:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 01:56:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 01:56:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 01:56:23 LOG5 end_task: Level: (3) ID = <10259> Status = 0 0 0 0 ok 2010-Aug-18 01:56:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 01:56:23 LOG5 end_task: Level: (2) ID = <10258> Status = 0 0 0 0 ok 2010-Aug-18 01:56:23 LOG1 fixed_driftmap: New position: year = 2010.6299269589576 RA = 23:14:48.2 RA/Dec = 23:15:22.1 +22:19:32.9 2010-Aug-18 01:56:23 NOTE fixed_driftmap: Correcting ZA to 3:58:19.2 ... 2010-Aug-18 01:56:23 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9720018748 -CF 2010-Aug-18 01:56:23 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 01:56:23 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 01:56:23 LOG5 begin_task: Level: (2) ID = <10260> Status = 0 0 0 0 ok 2010-Aug-18 01:56:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 01:56:23 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 01:56:23 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2010-Aug-18 01:56:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 01:56:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 01:56:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 01:56:23 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 01:56:23 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2010-Aug-18 01:56:23 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9720018748 -CF 2010-Aug-18 01:56:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:56:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 01:56:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 01:56:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:56:23 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 01:56:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 01:56:23 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2010-Aug-18 01:56:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 01:56:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 01:56:23 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 01:56:23 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 01:56:23 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2010-Aug-18 01:56:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 01:56:24 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 01:56:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 01:56:24 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2010-Aug-18 01:56:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 01:56:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 01:56:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 01:56:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 01:56:24 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 01:56:24 LOG5 begin_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2010-Aug-18 01:56:24 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 01:56:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 01:56:24 LOG5 end_task: Level: (4) ID = <10264> Status = 0 0 0 0 ok 2010-Aug-18 01:56:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 01:56:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 01:56:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 01:56:24 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2010-Aug-18 01:56:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 01:56:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 01:56:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 01:56:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 01:56:24 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2010-Aug-18 01:56:24 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 01:56:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 01:56:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 01:56:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 01:56:24 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2010-Aug-18 01:56:24 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 01:56:24 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 01:56:24 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2010-Aug-18 01:56:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 01:56:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 01:56:24 INFO2 take_data: Starting WAPP 1-second scan: 23000023 2010-Aug-18 01:56:24 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 01:56:24 LOG5 begin_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2010-Aug-18 01:56:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 01:56:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21385.00 2010-Aug-18 01:56:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 01:56:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 01:56:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:56:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:56:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 01:56:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:56:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 01:56:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 01:56:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 01:56:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 01:56:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 01:56:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 01:56:26 LOG5 end_task: Level: (4) ID = <10267> Status = 0 0 0 0 ok 2010-Aug-18 01:56:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 01:56:26 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2010-Aug-18 01:56:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 01:56:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 01:56:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 01:56:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 01:56:26 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2010-Aug-18 01:56:26 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 01:56:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 01:56:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 01:56:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 01:56:26 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2010-Aug-18 01:56:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 01:56:26 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 01:56:26 LOG5 finish_task: Level: (2) ID = <10260> Status = 0 0 0 0 ok 2010-Aug-18 01:56:26 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 01:56:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 01:56:26 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 01:56:26 LOG5 end_task: Level: (2) ID = <10260> Status = 0 0 0 0 ok 2010-Aug-18 01:56:26 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2010-Aug-18 01:56:26 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2010-Aug-18 01:56:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:56:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:56:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:56:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 01:56:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 01:56:27 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 01:56:27 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 01:56:27 LOG5 begin_task: Level: (2) ID = <10269> Status = 0 0 0 0 ok 2010-Aug-18 01:56:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 01:56:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 01:56:27 INFO2 take_data: Starting WAPP 600-second scan: 23000024 2010-Aug-18 01:56:27 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 01:56:27 LOG5 begin_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2010-Aug-18 01:56:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 01:56:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 01:56:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 01:56:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21388.00 2010-Aug-18 01:56:27 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0011.fits 2010-Aug-18 01:56:27 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0011.fits} 2010-Aug-18 01:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 01:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 01:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 01:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 01:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 01:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 01:56:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 02:06:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 02:06:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 02:06:28 LOG5 end_task: Level: (3) ID = <10270> Status = 0 0 0 0 ok 2010-Aug-18 02:06:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 02:06:28 LOG5 end_task: Level: (2) ID = <10269> Status = 0 0 0 0 ok 2010-Aug-18 02:06:28 LOG1 fixed_driftmap: New position: year = 2010.6299461302508 RA = 23:24:54.7 RA/Dec = 23:25:28.7 +22:19:34.4 2010-Aug-18 02:06:28 NOTE fixed_driftmap: Correcting ZA to 3:58:20.7 ... 2010-Aug-18 02:06:28 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9724097892 -CF 2010-Aug-18 02:06:28 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 02:06:28 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 02:06:28 LOG5 begin_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2010-Aug-18 02:06:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 02:06:28 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 02:06:28 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2010-Aug-18 02:06:28 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 02:06:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 02:06:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 02:06:28 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 02:06:28 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2010-Aug-18 02:06:28 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9724097892 -CF 2010-Aug-18 02:06:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:06:28 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 02:06:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 02:06:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:06:28 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 02:06:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 02:06:28 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2010-Aug-18 02:06:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 02:06:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 02:06:28 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 02:06:28 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 02:06:28 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2010-Aug-18 02:06:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:06:29 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 02:06:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 02:06:29 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2010-Aug-18 02:06:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 02:06:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 02:06:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 02:06:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 02:06:29 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 02:06:29 LOG5 begin_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2010-Aug-18 02:06:29 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 02:06:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 02:06:29 LOG5 end_task: Level: (4) ID = <10275> Status = 0 0 0 0 ok 2010-Aug-18 02:06:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 02:06:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 02:06:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 02:06:29 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2010-Aug-18 02:06:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 02:06:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 02:06:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 02:06:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 02:06:29 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2010-Aug-18 02:06:29 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 02:06:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 02:06:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 02:06:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 02:06:29 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2010-Aug-18 02:06:29 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 02:06:29 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 02:06:29 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2010-Aug-18 02:06:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 02:06:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 02:06:29 INFO2 take_data: Starting WAPP 1-second scan: 23000025 2010-Aug-18 02:06:29 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 02:06:29 LOG5 begin_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2010-Aug-18 02:06:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 02:06:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 02:06:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21990.00 2010-Aug-18 02:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 02:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 02:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 02:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 02:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 02:06:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 02:06:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 02:06:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 02:06:31 LOG5 end_task: Level: (4) ID = <10278> Status = 0 0 0 0 ok 2010-Aug-18 02:06:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 02:06:31 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2010-Aug-18 02:06:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 02:06:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 02:06:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 02:06:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 02:06:31 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2010-Aug-18 02:06:32 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 02:06:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 02:06:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 02:06:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 02:06:32 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2010-Aug-18 02:06:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 02:06:32 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 02:06:32 LOG5 finish_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2010-Aug-18 02:06:32 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 02:06:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 02:06:32 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 02:06:32 LOG5 end_task: Level: (2) ID = <10271> Status = 0 0 0 0 ok 2010-Aug-18 02:06:32 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2010-Aug-18 02:06:32 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2010-Aug-18 02:06:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:06:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:06:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:06:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:06:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 02:06:32 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 02:06:32 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 02:06:32 LOG5 begin_task: Level: (2) ID = <10280> Status = 0 0 0 0 ok 2010-Aug-18 02:06:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 02:06:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 02:06:32 INFO2 take_data: Starting WAPP 600-second scan: 23000026 2010-Aug-18 02:06:32 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 02:06:32 LOG5 begin_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2010-Aug-18 02:06:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 02:06:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 02:06:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 02:06:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21993.00 2010-Aug-18 02:06:32 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0012.fits 2010-Aug-18 02:06:32 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0012.fits} 2010-Aug-18 02:06:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 02:06:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:06:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:06:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 02:06:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:06:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 02:06:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 02:06:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 02:06:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 02:16:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 02:16:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 02:16:33 LOG5 end_task: Level: (3) ID = <10281> Status = 0 0 0 0 ok 2010-Aug-18 02:16:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 02:16:33 LOG5 end_task: Level: (2) ID = <10280> Status = 0 0 0 0 ok 2010-Aug-18 02:16:33 LOG1 fixed_driftmap: New position: year = 2010.6299653015437 RA = 23:35:01.1 RA/Dec = 23:35:35.4 +22:19:35.4 2010-Aug-18 02:16:33 NOTE fixed_driftmap: Correcting ZA to 3:58:21.7 ... 2010-Aug-18 02:16:33 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9727019779 -CF 2010-Aug-18 02:16:33 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 02:16:33 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 02:16:33 LOG5 begin_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2010-Aug-18 02:16:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 02:16:33 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 02:16:33 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Aug-18 02:16:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 02:16:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 02:16:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 02:16:33 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 02:16:33 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2010-Aug-18 02:16:33 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9727019779 -CF 2010-Aug-18 02:16:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:16:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 02:16:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 02:16:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:16:34 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 02:16:34 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 02:16:34 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2010-Aug-18 02:16:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 02:16:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 02:16:34 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 02:16:34 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 02:16:34 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2010-Aug-18 02:16:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:16:34 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 02:16:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 02:16:34 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2010-Aug-18 02:16:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 02:16:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 02:16:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 02:16:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 02:16:34 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 02:16:34 LOG5 begin_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2010-Aug-18 02:16:34 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 02:16:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 02:16:34 LOG5 end_task: Level: (4) ID = <10286> Status = 0 0 0 0 ok 2010-Aug-18 02:16:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 02:16:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 02:16:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 02:16:34 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Aug-18 02:16:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 02:16:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 02:16:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 02:16:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 02:16:34 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2010-Aug-18 02:16:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 02:16:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 02:16:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 02:16:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 02:16:34 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2010-Aug-18 02:16:34 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 02:16:34 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 02:16:34 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2010-Aug-18 02:16:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 02:16:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 02:16:34 INFO2 take_data: Starting WAPP 1-second scan: 23000027 2010-Aug-18 02:16:35 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 02:16:35 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2010-Aug-18 02:16:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 02:16:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 02:16:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22596.00 2010-Aug-18 02:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 02:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 02:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 02:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 02:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 02:16:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 02:16:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 02:16:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 02:16:37 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2010-Aug-18 02:16:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 02:16:37 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2010-Aug-18 02:16:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 02:16:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 02:16:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 02:16:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 02:16:37 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2010-Aug-18 02:16:37 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 02:16:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 02:16:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 02:16:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 02:16:37 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2010-Aug-18 02:16:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 02:16:37 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 02:16:37 LOG5 finish_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2010-Aug-18 02:16:37 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 02:16:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 02:16:37 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 02:16:37 LOG5 end_task: Level: (2) ID = <10282> Status = 0 0 0 0 ok 2010-Aug-18 02:16:37 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2010-Aug-18 02:16:37 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2010-Aug-18 02:16:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:16:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:16:38 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:16:38 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:16:38 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 02:16:38 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 02:16:38 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 02:16:38 LOG5 begin_task: Level: (2) ID = <10291> Status = 0 0 0 0 ok 2010-Aug-18 02:16:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 02:16:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 02:16:38 INFO2 take_data: Starting WAPP 600-second scan: 23000028 2010-Aug-18 02:16:38 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 02:16:38 LOG5 begin_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2010-Aug-18 02:16:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 02:16:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 02:16:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 02:16:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22599.00 2010-Aug-18 02:16:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0013.fits 2010-Aug-18 02:16:38 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0013.fits} 2010-Aug-18 02:16:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 02:16:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:16:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:16:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 02:16:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:16:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 02:16:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 02:16:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 02:16:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 02:26:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 02:26:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 02:26:39 LOG5 end_task: Level: (3) ID = <10292> Status = 0 0 0 0 ok 2010-Aug-18 02:26:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 02:26:39 LOG5 end_task: Level: (2) ID = <10291> Status = 0 0 0 0 ok 2010-Aug-18 02:26:39 LOG1 fixed_driftmap: New position: year = 2010.6299845045251 RA = 23:45:08.5 RA/Dec = 23:45:43.1 +22:19:36.1 2010-Aug-18 02:26:39 NOTE fixed_driftmap: Correcting ZA to 3:58:22.4 ... 2010-Aug-18 02:26:39 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9728780665 -CF 2010-Aug-18 02:26:39 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 02:26:39 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 02:26:39 LOG5 begin_task: Level: (2) ID = <10293> Status = 0 0 0 0 ok 2010-Aug-18 02:26:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 02:26:39 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 02:26:39 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Aug-18 02:26:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 02:26:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 02:26:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 02:26:39 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 02:26:39 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2010-Aug-18 02:26:39 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9728780665 -CF 2010-Aug-18 02:26:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:26:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 02:26:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 02:26:39 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:26:39 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 02:26:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 02:26:39 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2010-Aug-18 02:26:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 02:26:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 02:26:39 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 02:26:39 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 02:26:39 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2010-Aug-18 02:26:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:26:40 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 02:26:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 02:26:40 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2010-Aug-18 02:26:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 02:26:40 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 02:26:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 02:26:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 02:26:40 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 02:26:40 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2010-Aug-18 02:26:40 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 02:26:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 02:26:40 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2010-Aug-18 02:26:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 02:26:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 02:26:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 02:26:40 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Aug-18 02:26:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 02:26:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 02:26:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 02:26:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 02:26:40 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2010-Aug-18 02:26:40 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 02:26:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 02:26:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 02:26:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 02:26:40 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2010-Aug-18 02:26:40 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 02:26:40 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 02:26:40 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2010-Aug-18 02:26:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 02:26:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 02:26:40 INFO2 take_data: Starting WAPP 1-second scan: 23000029 2010-Aug-18 02:26:40 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 02:26:40 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2010-Aug-18 02:26:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 02:26:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 02:26:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23201.00 2010-Aug-18 02:26:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 02:26:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:26:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:26:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 02:26:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:26:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 02:26:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 02:26:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 02:26:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 02:26:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 02:26:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 02:26:42 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2010-Aug-18 02:26:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 02:26:42 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2010-Aug-18 02:26:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 02:26:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 02:26:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 02:26:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 02:26:42 LOG5 begin_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2010-Aug-18 02:26:42 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 02:26:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 02:26:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 02:26:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 02:26:42 LOG5 end_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2010-Aug-18 02:26:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 02:26:42 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 02:26:42 LOG5 finish_task: Level: (2) ID = <10293> Status = 0 0 0 0 ok 2010-Aug-18 02:26:42 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 02:26:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 02:26:42 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 02:26:42 LOG5 end_task: Level: (2) ID = <10293> Status = 0 0 0 0 ok 2010-Aug-18 02:26:42 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2010-Aug-18 02:26:42 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2010-Aug-18 02:26:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:26:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:26:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:26:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:26:43 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 02:26:43 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 02:26:43 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 02:26:43 LOG5 begin_task: Level: (2) ID = <10302> Status = 0 0 0 0 ok 2010-Aug-18 02:26:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 02:26:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 02:26:43 INFO2 take_data: Starting WAPP 600-second scan: 23000030 2010-Aug-18 02:26:43 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 02:26:43 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2010-Aug-18 02:26:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 02:26:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 02:26:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 02:26:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23204.00 2010-Aug-18 02:26:43 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0014.fits 2010-Aug-18 02:26:43 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0014.fits} 2010-Aug-18 02:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 02:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 02:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 02:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 02:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 02:26:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 02:36:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 02:36:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 02:36:44 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2010-Aug-18 02:36:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 02:36:44 LOG5 end_task: Level: (2) ID = <10302> Status = 0 0 0 0 ok 2010-Aug-18 02:36:44 LOG1 fixed_driftmap: New position: year = 2010.6300036758182 RA = 23:55:15.0 RA/Dec = 23:55:49.7 +22:19:36.3 2010-Aug-18 02:36:44 NOTE fixed_driftmap: Correcting ZA to 3:58:22.6 ... 2010-Aug-18 02:36:44 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9729371300 -CF 2010-Aug-18 02:36:44 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 02:36:44 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 02:36:44 LOG5 begin_task: Level: (2) ID = <10304> Status = 0 0 0 0 ok 2010-Aug-18 02:36:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 02:36:44 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 02:36:44 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2010-Aug-18 02:36:44 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 02:36:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 02:36:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 02:36:44 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 02:36:44 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2010-Aug-18 02:36:44 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9729371300 -CF 2010-Aug-18 02:36:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:36:44 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 02:36:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 02:36:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:36:44 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 02:36:44 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 02:36:44 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2010-Aug-18 02:36:44 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 02:36:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 02:36:44 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 02:36:44 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 02:36:44 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2010-Aug-18 02:36:44 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:36:45 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 02:36:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 02:36:45 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2010-Aug-18 02:36:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 02:36:45 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 02:36:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 02:36:45 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 02:36:45 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 02:36:45 LOG5 begin_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2010-Aug-18 02:36:45 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 02:36:45 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 02:36:45 LOG5 end_task: Level: (4) ID = <10308> Status = 0 0 0 0 ok 2010-Aug-18 02:36:45 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 02:36:45 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 02:36:45 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 02:36:45 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2010-Aug-18 02:36:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 02:36:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 02:36:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 02:36:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 02:36:45 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2010-Aug-18 02:36:45 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 02:36:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 02:36:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 02:36:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 02:36:45 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2010-Aug-18 02:36:45 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 02:36:45 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 02:36:45 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2010-Aug-18 02:36:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 02:36:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 02:36:45 INFO2 take_data: Starting WAPP 1-second scan: 23000031 2010-Aug-18 02:36:45 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 02:36:45 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2010-Aug-18 02:36:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 02:36:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23806.00 2010-Aug-18 02:36:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 02:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 02:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 02:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 02:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 02:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 02:36:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 02:36:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 02:36:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 02:36:47 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2010-Aug-18 02:36:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 02:36:47 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2010-Aug-18 02:36:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 02:36:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 02:36:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 02:36:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 02:36:47 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2010-Aug-18 02:36:47 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 02:36:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 02:36:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 02:36:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 02:36:47 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2010-Aug-18 02:36:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 02:36:47 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 02:36:47 LOG5 finish_task: Level: (2) ID = <10304> Status = 0 0 0 0 ok 2010-Aug-18 02:36:47 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 02:36:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 02:36:47 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 02:36:47 LOG5 end_task: Level: (2) ID = <10304> Status = 0 0 0 0 ok 2010-Aug-18 02:36:47 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2010-Aug-18 02:36:47 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2010-Aug-18 02:36:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:36:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:36:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:36:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:36:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 02:36:48 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 02:36:48 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 02:36:48 LOG5 begin_task: Level: (2) ID = <10313> Status = 0 0 0 0 ok 2010-Aug-18 02:36:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 02:36:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 02:36:48 INFO2 take_data: Starting WAPP 600-second scan: 23000032 2010-Aug-18 02:36:48 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 02:36:48 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2010-Aug-18 02:36:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 02:36:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 02:36:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 02:36:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23809.00 2010-Aug-18 02:36:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0015.fits 2010-Aug-18 02:36:48 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0015.fits} 2010-Aug-18 02:36:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 02:36:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:36:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:36:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 02:36:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:36:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 02:36:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 02:36:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 02:36:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 02:46:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 02:46:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 02:46:49 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2010-Aug-18 02:46:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 02:46:49 LOG5 end_task: Level: (2) ID = <10313> Status = 0 0 0 0 ok 2010-Aug-18 02:46:49 LOG1 fixed_driftmap: New position: year = 2010.6300228471114 RA = 00:05:21.4 RA/Dec = 00:05:56.4 +22:19:36.1 2010-Aug-18 02:46:49 NOTE fixed_driftmap: Correcting ZA to 3:58:22.4 ... 2010-Aug-18 02:46:49 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9728794396 -CF 2010-Aug-18 02:46:49 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 02:46:49 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 02:46:49 LOG5 begin_task: Level: (2) ID = <10315> Status = 0 0 0 0 ok 2010-Aug-18 02:46:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 02:46:49 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 02:46:49 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2010-Aug-18 02:46:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 02:46:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 02:46:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 02:46:49 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 02:46:49 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2010-Aug-18 02:46:49 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9728794396 -CF 2010-Aug-18 02:46:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:46:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 02:46:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 02:46:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:46:49 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 02:46:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 02:46:49 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2010-Aug-18 02:46:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 02:46:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 02:46:49 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 02:46:49 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 02:46:49 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2010-Aug-18 02:46:49 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:46:50 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 02:46:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 02:46:50 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2010-Aug-18 02:46:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 02:46:50 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 02:46:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 02:46:50 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 02:46:50 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 02:46:50 LOG5 begin_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2010-Aug-18 02:46:50 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 02:46:50 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 02:46:50 LOG5 end_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2010-Aug-18 02:46:50 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 02:46:50 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 02:46:50 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 02:46:50 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2010-Aug-18 02:46:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 02:46:50 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 02:46:50 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 02:46:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 02:46:50 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2010-Aug-18 02:46:50 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 02:46:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 02:46:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 02:46:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 02:46:50 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2010-Aug-18 02:46:50 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 02:46:50 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 02:46:50 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2010-Aug-18 02:46:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 02:46:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 02:46:50 INFO2 take_data: Starting WAPP 1-second scan: 23000033 2010-Aug-18 02:46:50 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 02:46:50 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2010-Aug-18 02:46:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 02:46:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 02:46:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24411.00 2010-Aug-18 02:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 02:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 02:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 02:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 02:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 02:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 02:46:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 02:46:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 02:46:52 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2010-Aug-18 02:46:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 02:46:52 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2010-Aug-18 02:46:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 02:46:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 02:46:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 02:46:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 02:46:52 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2010-Aug-18 02:46:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 02:46:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 02:46:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 02:46:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 02:46:53 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2010-Aug-18 02:46:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 02:46:53 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 02:46:53 LOG5 finish_task: Level: (2) ID = <10315> Status = 0 0 0 0 ok 2010-Aug-18 02:46:53 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 02:46:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 02:46:53 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 02:46:53 LOG5 end_task: Level: (2) ID = <10315> Status = 0 0 0 0 ok 2010-Aug-18 02:46:53 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2010-Aug-18 02:46:53 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2010-Aug-18 02:46:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:46:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:46:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:46:53 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:46:53 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 02:46:53 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 02:46:53 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 02:46:53 LOG5 begin_task: Level: (2) ID = <10324> Status = 0 0 0 0 ok 2010-Aug-18 02:46:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 02:46:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 02:46:53 INFO2 take_data: Starting WAPP 600-second scan: 23000034 2010-Aug-18 02:46:53 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 02:46:53 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2010-Aug-18 02:46:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 02:46:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 02:46:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 02:46:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24414.00 2010-Aug-18 02:46:53 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0016.fits 2010-Aug-18 02:46:53 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0016.fits} 2010-Aug-18 02:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 02:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 02:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 02:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 02:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 02:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 02:56:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 02:56:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 02:56:54 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2010-Aug-18 02:56:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 02:56:54 LOG5 end_task: Level: (2) ID = <10324> Status = 0 0 0 0 ok 2010-Aug-18 02:56:54 LOG1 fixed_driftmap: New position: year = 2010.6300420184045 RA = 00:15:27.8 RA/Dec = 00:16:03.0 +22:19:35.4 2010-Aug-18 02:56:54 NOTE fixed_driftmap: Correcting ZA to 3:58:21.7 ... 2010-Aug-18 02:56:54 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9727051060 -CF 2010-Aug-18 02:56:54 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 02:56:54 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 02:56:54 LOG5 begin_task: Level: (2) ID = <10326> Status = 0 0 0 0 ok 2010-Aug-18 02:56:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 02:56:54 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 02:56:54 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2010-Aug-18 02:56:54 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 02:56:54 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 02:56:54 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 02:56:54 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 02:56:54 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2010-Aug-18 02:56:54 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9727051060 -CF 2010-Aug-18 02:56:54 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:56:54 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 02:56:54 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 02:56:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:56:55 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 02:56:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 02:56:55 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2010-Aug-18 02:56:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 02:56:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 02:56:55 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 02:56:55 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 02:56:55 LOG5 begin_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2010-Aug-18 02:56:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 02:56:55 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 02:56:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 02:56:55 LOG5 end_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2010-Aug-18 02:56:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 02:56:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 02:56:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 02:56:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 02:56:55 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 02:56:55 LOG5 begin_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2010-Aug-18 02:56:55 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 02:56:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 02:56:55 LOG5 end_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2010-Aug-18 02:56:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 02:56:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 02:56:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 02:56:55 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2010-Aug-18 02:56:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 02:56:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 02:56:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 02:56:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 02:56:55 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2010-Aug-18 02:56:55 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 02:56:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 02:56:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 02:56:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 02:56:55 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2010-Aug-18 02:56:55 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 02:56:55 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 02:56:55 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2010-Aug-18 02:56:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 02:56:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 02:56:55 INFO2 take_data: Starting WAPP 1-second scan: 23000035 2010-Aug-18 02:56:56 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 02:56:56 LOG5 begin_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2010-Aug-18 02:56:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 02:56:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 02:56:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25017.00 2010-Aug-18 02:56:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 02:56:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:56:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:56:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 02:56:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:56:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 02:56:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 02:56:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 02:56:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 02:56:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 02:56:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 02:56:58 LOG5 end_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2010-Aug-18 02:56:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 02:56:58 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2010-Aug-18 02:56:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 02:56:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 02:56:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 02:56:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 02:56:58 LOG5 begin_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2010-Aug-18 02:56:58 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 02:56:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 02:56:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 02:56:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 02:56:58 LOG5 end_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2010-Aug-18 02:56:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 02:56:58 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 02:56:58 LOG5 finish_task: Level: (2) ID = <10326> Status = 0 0 0 0 ok 2010-Aug-18 02:56:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 02:56:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 02:56:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 02:56:58 LOG5 end_task: Level: (2) ID = <10326> Status = 0 0 0 0 ok 2010-Aug-18 02:56:58 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2010-Aug-18 02:56:58 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2010-Aug-18 02:56:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:56:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:56:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:56:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 02:56:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 02:56:59 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 02:56:59 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 02:56:59 LOG5 begin_task: Level: (2) ID = <10335> Status = 0 0 0 0 ok 2010-Aug-18 02:56:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 02:56:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 02:56:59 INFO2 take_data: Starting WAPP 600-second scan: 23000036 2010-Aug-18 02:56:59 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 02:56:59 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2010-Aug-18 02:56:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 02:56:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 02:56:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25020.00 2010-Aug-18 02:56:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 02:56:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0017.fits 2010-Aug-18 02:56:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0017.fits} 2010-Aug-18 02:57:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 02:57:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:57:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:57:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 02:57:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 02:57:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 02:57:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 02:57:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 02:57:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 03:07:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 03:07:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 03:07:00 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2010-Aug-18 03:07:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 03:07:00 LOG5 end_task: Level: (2) ID = <10335> Status = 0 0 0 0 ok 2010-Aug-18 03:07:00 LOG1 fixed_driftmap: New position: year = 2010.6300612213856 RA = 00:25:35.2 RA/Dec = 00:26:10.7 +22:19:34.4 2010-Aug-18 03:07:00 NOTE fixed_driftmap: Correcting ZA to 3:58:20.7 ... 2010-Aug-18 03:07:00 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 3.9724138910 -CF 2010-Aug-18 03:07:00 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Aug-18 03:07:00 START begin_task: Starting task 'WAPP calibration' 2010-Aug-18 03:07:00 LOG5 begin_task: Level: (2) ID = <10337> Status = 0 0 0 0 ok 2010-Aug-18 03:07:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Aug-18 03:07:00 START begin_task: Starting task 'selecting calibration type' 2010-Aug-18 03:07:00 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Aug-18 03:07:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Aug-18 03:07:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Aug-18 03:07:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 03:07:00 START begin_task: Starting task 'waiting on setcal' 2010-Aug-18 03:07:00 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2010-Aug-18 03:07:00 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 3.9724138910 -CF 2010-Aug-18 03:07:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 03:07:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Aug-18 03:07:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Aug-18 03:07:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 03:07:00 LOG4 got_cormsg: From DATATAKING: DONE 2010-Aug-18 03:07:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Aug-18 03:07:00 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2010-Aug-18 03:07:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Aug-18 03:07:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 03:07:00 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Aug-18 03:07:00 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 03:07:00 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2010-Aug-18 03:07:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Aug-18 03:07:01 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 03:07:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 03:07:01 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2010-Aug-18 03:07:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 03:07:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Aug-18 03:07:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Aug-18 03:07:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Aug-18 03:07:01 START begin_task: Starting task 'waiting on command to ALFA' 2010-Aug-18 03:07:01 LOG5 begin_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2010-Aug-18 03:07:01 LOG4 got_alfamon: From ALFAMON: ACK 2010-Aug-18 03:07:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Aug-18 03:07:01 LOG5 end_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2010-Aug-18 03:07:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Aug-18 03:07:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Aug-18 03:07:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Aug-18 03:07:01 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Aug-18 03:07:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Aug-18 03:07:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Aug-18 03:07:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Aug-18 03:07:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 03:07:01 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2010-Aug-18 03:07:01 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 03:07:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Aug-18 03:07:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 03:07:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 03:07:01 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2010-Aug-18 03:07:01 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Aug-18 03:07:01 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 03:07:01 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2010-Aug-18 03:07:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Aug-18 03:07:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 03:07:01 INFO2 take_data: Starting WAPP 1-second scan: 23000037 2010-Aug-18 03:07:01 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 03:07:01 LOG5 begin_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2010-Aug-18 03:07:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 03:07:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Aug-18 03:07:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25622.00 2010-Aug-18 03:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 03:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 03:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 03:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 290.000000 MHz 2010-Aug-18 03:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 03:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1765.000000 MHz 2010-Aug-18 03:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2010-Aug-18 03:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1885.000000 MHz 2010-Aug-18 03:07:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 475.000000 MHz 2010-Aug-18 03:07:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Aug-18 03:07:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Aug-18 03:07:03 LOG5 end_task: Level: (4) ID = <10344> Status = 0 0 0 0 ok 2010-Aug-18 03:07:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Aug-18 03:07:03 LOG5 end_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2010-Aug-18 03:07:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Aug-18 03:07:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Aug-18 03:07:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Aug-18 03:07:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Aug-18 03:07:03 LOG5 begin_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2010-Aug-18 03:07:04 LOG3 CALCONTROL-caltrig: Software trigger 2010-Aug-18 03:07:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Aug-18 03:07:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Aug-18 03:07:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Aug-18 03:07:04 LOG5 end_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2010-Aug-18 03:07:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Aug-18 03:07:04 STOP finish_task: Finishing task 'WAPP calibration' 2010-Aug-18 03:07:04 LOG5 finish_task: Level: (2) ID = <10337> Status = 0 0 0 0 ok 2010-Aug-18 03:07:04 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Aug-18 03:07:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Aug-18 03:07:04 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Aug-18 03:07:04 LOG5 end_task: Level: (2) ID = <10337> Status = 0 0 0 0 ok 2010-Aug-18 03:07:04 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 20 of 99 2010-Aug-18 03:07:04 LOG4 send_obs_status: To obs_status: <1> LOOP 20 2010-Aug-18 03:07:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Aug-18 03:07:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Aug-18 03:07:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Aug-18 03:07:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Aug-18 03:07:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Aug-18 03:07:04 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Aug-18 03:07:04 START begin_task: Starting task 'WAPP spectral observation' 2010-Aug-18 03:07:04 LOG5 begin_task: Level: (2) ID = <10346> Status = 0 0 0 0 ok 2010-Aug-18 03:07:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Aug-18 03:07:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Aug-18 03:07:04 INFO2 take_data: Starting WAPP 600-second scan: 23000038 2010-Aug-18 03:07:04 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Aug-18 03:07:04 LOG5 begin_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2010-Aug-18 03:07:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Aug-18 03:07:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Aug-18 03:07:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Aug-18 03:07:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25625.00 2010-Aug-18 03:07:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20100818.a2010.0018.fits 2010-Aug-18 03:07:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100818.a2010.0018.fits} 2010-Aug-18 03:07:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Aug-18 03:07:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 03:07:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1010.000000 MHz 2010-Aug-18 03:07:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 B