2009-Aug-31 23:05:51 BEGIN executive: CIMA executive starting ... 2009-Aug-31 23:05:51 NOTE executive: STARTING NEW CIMA SESSION 2009-Aug-31 23:05:51 INFO1 executive: Using CIMA version 3.1.05 'smart' from 2009-05-18 09:44 2009-Aug-31 23:05:51 INFO4 executive: This is an ON-LINE session 2009-Aug-31 23:05:51 INFO4 executive: This is a REMOTE session 2009-Aug-31 23:05:51 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Aug-31 23:05:51 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Betsey Adams' 2009-Aug-31 23:05:51 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090831' 2009-Aug-31 23:05:52 LOG2 log_preferences: Currently applied preferences: 2009-Aug-31 23:05:52 LOG2 log_preferences: prefs(dailylog) = daily 2009-Aug-31 23:05:52 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Aug-31 23:05:52 LOG2 log_preferences: prefs(datawindow) = open 2009-Aug-31 23:05:52 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Aug-31 23:05:52 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Aug-31 23:05:52 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Aug-31 23:05:52 LOG2 log_preferences: prefs(logcolours) = full 2009-Aug-31 23:05:52 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Aug-31 23:05:52 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Aug-31 23:05:52 LOG2 log_preferences: prefs(displayformat) = long 2009-Aug-31 23:05:52 LOG2 log_preferences: prefs(logformat) = new 2009-Aug-31 23:05:52 LOG2 log_preferences: prefs(fontsize) = 3 2009-Aug-31 23:05:52 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Aug-31 23:05:52 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Aug-31 23:05:52 ALERT executive: CIMA executive ready 2009-Aug-31 23:05:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:05:54 LOG4 got_cormsg: From DATATAKING: setup 2009-Aug-31 23:05:55 NOTE frontend: CIMA frontend ready 2009-Aug-31 23:05:58 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Aug-31 23:05:58 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Aug-31 23:05:58 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Aug-31 23:05:58 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Aug-31 23:05:58 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Aug-31 23:05:58 NOTE select_receiver: Starting to select receiver ALFA 2009-Aug-31 23:05:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Aug-31 23:05:58 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Aug-31 23:05:58 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Aug-31 23:05:58 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Aug-31 23:05:58 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Aug-31 23:05:58 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Aug-31 23:05:58 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Aug-31 23:05:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Aug-31 23:05:59 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Aug-31 23:05:59 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Aug-31 23:06:00 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: tape stat 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Aug-31 23:06:00 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Aug-31 23:06:00 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Aug-31 23:06:01 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Aug-31 23:06:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:06:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:06:05 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Aug-31 23:06:05 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Aug-31 23:06:05 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Aug-31 23:06:05 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Aug-31 23:06:05 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Aug-31 23:06:05 NOTE restart_wapp: Restarting all WAPPs 2009-Aug-31 23:06:05 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Aug-31 23:06:05 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Aug-31 23:06:05 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Aug-31 23:06:05 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Aug-31 23:06:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:06:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:06:08 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Aug-31 23:06:08 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Aug-31 23:06:08 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Aug-31 23:06:09 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Aug-31 23:06:18 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Aug-31 23:07:17 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Aug-31 23:07:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Aug-31 23:07:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Aug-31 23:07:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Aug-31 23:07:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Aug-31 23:07:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Aug-31 23:07:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Aug-31 23:07:17 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Aug-31 23:07:17 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Aug-31 23:07:17 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Aug-31 23:07:17 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Aug-31 23:07:17 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Aug-31 23:07:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Aug-31 23:07:17 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Aug-31 23:07:17 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Aug-31 23:07:17 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Aug-31 23:07:18 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Aug-31 23:07:18 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Aug-31 23:07:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Aug-31 23:07:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Aug-31 23:07:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Aug-31 23:07:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Aug-31 23:07:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Aug-31 23:07:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Aug-31 23:07:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Aug-31 23:07:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Aug-31 23:07:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Aug-31 23:07:20 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Aug-31 23:07:20 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Aug-31 23:07:20 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Aug-31 23:07:20 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Aug-31 23:07:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Aug-31 23:07:20 INFO1 config_iflo: Selecting receiver ALFA 2009-Aug-31 23:07:20 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Aug-31 23:07:20 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Aug-31 23:07:20 START begin_task: Starting task 'selecting receiver ALFA' 2009-Aug-31 23:07:20 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Aug-31 23:07:20 NOTE select_receiver: Starting to select receiver ALFA 2009-Aug-31 23:07:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Aug-31 23:07:20 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Aug-31 23:07:20 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Aug-31 23:07:20 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Aug-31 23:07:20 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Aug-31 23:07:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Aug-31 23:07:20 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Aug-31 23:07:20 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Aug-31 23:07:20 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Aug-31 23:07:20 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Aug-31 23:07:20 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Aug-31 23:07:20 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Aug-31 23:07:20 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Aug-31 23:07:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Aug-31 23:07:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Aug-31 23:07:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Aug-31 23:07:20 START begin_task: Starting task 'waiting on command to ALFA' 2009-Aug-31 23:07:20 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Aug-31 23:07:20 LOG4 got_alfamon: From ALFAMON: ACK 2009-Aug-31 23:07:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Aug-31 23:07:20 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Aug-31 23:07:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Aug-31 23:07:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Aug-31 23:07:20 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Aug-31 23:07:20 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Aug-31 23:07:20 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Aug-31 23:07:20 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Aug-31 23:07:20 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Aug-31 23:07:20 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Aug-31 23:07:20 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Aug-31 23:07:20 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Aug-31 23:07:20 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Aug-31 23:07:20 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Aug-31 23:07:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Aug-31 23:07:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:07:20 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Aug-31 23:07:20 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Aug-31 23:07:20 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Aug-31 23:07:20 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Aug-31 23:07:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:07:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:36 LOG4 got_cormsg: From DATATAKING: DONE 2009-Aug-31 23:07:36 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Aug-31 23:07:36 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Aug-31 23:07:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Aug-31 23:07:36 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Aug-31 23:07:36 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Aug-31 23:07:36 DONE finish_task: DONE finished configuration: IF/LO path 2009-Aug-31 23:07:36 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Aug-31 23:07:36 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Aug-31 23:07:36 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Aug-31 23:07:36 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Aug-31 23:07:37 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Aug-31 23:07:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Aug-31 23:07:37 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Aug-31 23:07:37 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Aug-31 23:07:37 START begin_task: Starting task 'selecting calibration port' 2009-Aug-31 23:07:37 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Aug-31 23:07:37 LOG3 vw_send: To DATATAKING: calport 3 2009-Aug-31 23:07:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Aug-31 23:07:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:07:37 START begin_task: Starting task 'waiting on calport' 2009-Aug-31 23:07:37 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Aug-31 23:07:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:37 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Aug-31 23:07:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:07:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:37 LOG4 got_cormsg: From DATATAKING: DONE 2009-Aug-31 23:07:37 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Aug-31 23:07:37 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Aug-31 23:07:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Aug-31 23:07:37 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Aug-31 23:07:37 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Aug-31 23:07:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Aug-31 23:07:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Aug-31 23:07:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Aug-31 23:07:37 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Aug-31 23:07:37 LOG3 CALCONTROL-caltrig: Software trigger 2009-Aug-31 23:07:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Aug-31 23:07:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Aug-31 23:07:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Aug-31 23:07:37 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Aug-31 23:07:37 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Aug-31 23:07:37 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Aug-31 23:07:37 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Aug-31 23:07:37 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Aug-31 23:07:37 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Aug-31 23:07:37 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Aug-31 23:07:37 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Aug-31 23:07:37 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Aug-31 23:07:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Aug-31 23:07:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Aug-31 23:07:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Aug-31 23:07:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Aug-31 23:07:37 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Aug-31 23:07:37 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Aug-31 23:07:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Aug-31 23:07:37 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Aug-31 23:07:37 LOG3 CALCONTROL-caltrig: Software trigger 2009-Aug-31 23:07:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Aug-31 23:07:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Aug-31 23:07:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Aug-31 23:07:37 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Aug-31 23:07:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Aug-31 23:07:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Aug-31 23:07:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Aug-31 23:07:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Aug-31 23:07:38 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Aug-31 23:07:38 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Aug-31 23:07:38 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Aug-31 23:07:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Aug-31 23:07:38 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Aug-31 23:07:38 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Aug-31 23:07:38 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Aug-31 23:07:38 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Aug-31 23:07:38 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Aug-31 23:07:38 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Aug-31 23:07:38 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Aug-31 23:07:38 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Aug-31 23:07:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Aug-31 23:07:38 LOG3 track_source: Calling 'track_source galfasrc 212900.0 +005106 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Aug-31 23:07:38 START begin_task: Starting task 'sending tracking commands' 2009-Aug-31 23:07:38 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Aug-31 23:07:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Aug-31 23:07:38 INFO1 track_source: Starting to track galfasrc 2009-Aug-31 23:07:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Aug-31 23:07:38 LOG3 vw_send: To DATATAKING: set ra 212900.0 2009-Aug-31 23:07:38 LOG3 vw_send: To DATATAKING: set dec +005106 2009-Aug-31 23:07:38 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Aug-31 23:07:38 LOG3 vw_send: To DATATAKING: pnt tr 212900.0 +005106 -CJ 2009-Aug-31 23:07:38 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Aug-31 23:07:38 STOP finish_task: Finishing task 'sending tracking commands' 2009-Aug-31 23:07:38 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Aug-31 23:07:38 INFO2 finish_task: DONE finished sending: tracking commands 2009-Aug-31 23:07:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Aug-31 23:07:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Aug-31 23:07:38 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Aug-31 23:07:38 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Aug-31 23:07:38 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Aug-31 23:07:38 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Aug-31 23:07:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Aug-31 23:07:38 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Aug-31 23:07:38 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Aug-31 23:07:39 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Aug-31 23:07:39 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Aug-31 23:07:39 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Aug-31 23:07:39 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Aug-31 23:07:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Aug-31 23:07:39 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Aug-31 23:07:39 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Aug-31 23:07:39 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Aug-31 23:07:39 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Aug-31 23:07:39 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Aug-31 23:07:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Aug-31 23:07:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20090831.a2010.0033.fits 2009-Aug-31 23:07:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Aug-31 23:07:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Aug-31 23:07:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Aug-31 23:07:39 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090831.a2010.0033.fits} 2009-Aug-31 23:07:39 LOG4 got_cormsg: From DATATAKING: set ra 212900.0 2009-Aug-31 23:07:39 LOG4 got_cormsg: From DATATAKING: set dec +005106 2009-Aug-31 23:07:39 LOG4 got_cormsg: From DATATAKING: vw% 212900.0 2009-Aug-31 23:07:39 LOG4 got_cormsg: From DATATAKING: vw% +005106 2009-Aug-31 23:07:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Aug-31 23:07:39 LOG4 got_cormsg: From DATATAKING: pnt tr 212900.0 +005106 -CJ 2009-Aug-31 23:07:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Aug-31 23:07:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Aug-31 23:07:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:07:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Aug-31 23:07:46 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Aug-31 23:07:46 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Aug-31 23:07:46 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Aug-31 23:07:46 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Aug-31 23:07:46 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Aug-31 23:07:46 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Aug-31 23:07:46 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Aug-31 23:07:46 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Aug-31 23:07:46 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Aug-31 23:07:46 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Aug-31 23:07:46 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Aug-31 23:07:46 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Aug-31 23:07:46 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Aug-31 23:07:46 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Aug-31 23:07:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Aug-31 23:07:46 LOG3 waittrk: Start waittrk 5 2009-Aug-31 23:07:46 START begin_task: Starting task 'waiting on telescope movement' 2009-Aug-31 23:07:46 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Aug-31 23:07:51 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Aug-31 23:07:51 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Aug-31 23:07:51 START begin_task: Starting task 'waiting on telescope on source' 2009-Aug-31 23:07:51 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Aug-31 23:08:09 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Aug-31 23:08:09 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Aug-31 23:08:09 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Aug-31 23:08:09 INFO2 waittrk: Now tracking galfasrc 2009-Aug-31 23:08:09 LOG4 waittrk: Current telescope position: Az = 354.06 ZA = 17.52 2009-Aug-31 23:08:09 STOP finish_task: Finishing task 'waiting on telescope' 2009-Aug-31 23:08:09 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Aug-31 23:08:09 DONE finish_task: DONE finished waiting: telescope on source 2009-Aug-31 23:08:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Aug-31 23:08:09 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Aug-31 23:08:09 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Aug-31 23:08:09 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Aug-31 23:08:09 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Aug-31 23:08:09 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Aug-31 23:08:09 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Aug-31 23:08:09 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Aug-31 23:08:09 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Aug-31 23:08:09 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Aug-31 23:08:09 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Aug-31 23:08:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Aug-31 23:08:09 START begin_task: Starting task 'selecting calibration type' 2009-Aug-31 23:08:09 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Aug-31 23:08:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Aug-31 23:08:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Aug-31 23:08:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:08:09 START begin_task: Starting task 'waiting on setcal' 2009-Aug-31 23:08:09 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Aug-31 23:08:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Aug-31 23:08:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:08:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:08:10 LOG4 got_cormsg: From DATATAKING: DONE 2009-Aug-31 23:08:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Aug-31 23:08:10 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Aug-31 23:08:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Aug-31 23:08:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Aug-31 23:08:10 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Aug-31 23:08:10 START begin_task: Starting task 'waiting on command to ALFA' 2009-Aug-31 23:08:10 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Aug-31 23:08:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:08:10 LOG4 got_alfamon: From ALFAMON: ACK 2009-Aug-31 23:08:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Aug-31 23:08:10 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Aug-31 23:08:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Aug-31 23:08:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Aug-31 23:08:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Aug-31 23:08:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Aug-31 23:08:10 START begin_task: Starting task 'waiting on command to ALFA' 2009-Aug-31 23:08:10 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Aug-31 23:08:10 LOG4 got_alfamon: From ALFAMON: ACK 2009-Aug-31 23:08:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Aug-31 23:08:10 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Aug-31 23:08:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Aug-31 23:08:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Aug-31 23:08:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Aug-31 23:08:10 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Aug-31 23:08:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Aug-31 23:08:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Aug-31 23:08:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Aug-31 23:08:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Aug-31 23:08:10 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090831.a2010.0033.fits' is empty! 2009-Aug-31 23:08:10 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Aug-31 23:08:10 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Aug-31 23:08:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Aug-31 23:08:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Aug-31 23:08:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Aug-31 23:08:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Aug-31 23:08:10 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Aug-31 23:08:10 LOG3 CALCONTROL-caltrig: Software trigger 2009-Aug-31 23:08:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Aug-31 23:08:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Aug-31 23:08:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Aug-31 23:08:10 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Aug-31 23:08:10 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Aug-31 23:08:10 START begin_task: Starting task 'adjusting WAPP power' 2009-Aug-31 23:08:10 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Aug-31 23:08:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Aug-31 23:08:10 INFO2 adjust_power: Starting to adjust WAPP power 2009-Aug-31 23:08:10 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Aug-31 23:08:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Aug-31 23:08:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:08:10 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Aug-31 23:08:10 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Aug-31 23:08:10 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Aug-31 23:08:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:08:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Aug-31 23:08:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:08:14 LOG4 got_cormsg: From DATATAKING: DONE 2009-Aug-31 23:08:14 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Aug-31 23:08:14 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Aug-31 23:08:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Aug-31 23:08:14 START begin_task: Starting task 'adjusting WAPP power' 2009-Aug-31 23:08:14 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Aug-31 23:08:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Aug-31 23:08:14 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Aug-31 23:08:14 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Aug-31 23:08:14 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Aug-31 23:08:14 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Aug-31 23:08:14 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Aug-31 23:08:14 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Aug-31 23:08:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Aug-31 23:08:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:08:14 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Aug-31 23:08:14 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 3 dB 2009-Aug-31 23:08:14 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 4 4 dB 2009-Aug-31 23:08:14 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 3 3 dB 2009-Aug-31 23:08:14 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Aug-31 23:08:14 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Aug-31 23:08:14 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Aug-31 23:08:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.047 0.936 ALFA beam 1: 0.912 0.902 2009-Aug-31 23:08:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.065 0.981 ALFA beam 3: 0.945 0.927 2009-Aug-31 23:08:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.096 1.086 ALFA beam 5: 0.968 1.020 2009-Aug-31 23:08:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.990 0.913 ALFA beam 7: 0.880 0.897 2009-Aug-31 23:08:14 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Aug-31 23:08:14 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Aug-31 23:08:14 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Aug-31 23:08:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Aug-31 23:08:14 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Aug-31 23:08:14 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Aug-31 23:08:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Aug-31 23:08:14 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Aug-31 23:08:14 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Aug-31 23:08:14 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Aug-31 23:08:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Aug-31 23:08:14 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Aug-31 23:08:14 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Aug-31 23:08:15 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Aug-31 23:08:15 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Aug-31 23:08:15 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Aug-31 23:08:15 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:08:15 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:08:15 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:08:15 LOG2 antvel: Parameters to Doppler: Topocentric 97694 2009 243 0.0 2009-Aug-31 23:08:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:08:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Aug-31 23:08:15 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Aug-31 23:08:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:08:15 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:08:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Aug-31 23:08:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:08:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Aug-31 23:08:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:08:15 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Aug-31 23:08:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Aug-31 23:08:15 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.381577 2009.6679371688597 18.999933 2009-Aug-31 23:08:15 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333299 0.851666666666673 2009-Aug-31 23:08:15 LOG4 log_alfabeam: ALFABEAM 1 21.481552621969399 0.954394293202537 2009-Aug-31 23:08:15 LOG4 log_alfabeam: ALFABEAM 2 21.477395512714367 0.878683053592060 2009-Aug-31 23:08:15 LOG4 log_alfabeam: ALFABEAM 3 21.479154665338640 0.775860615242488 2009-Aug-31 23:08:15 LOG4 log_alfabeam: ALFABEAM 4 21.485127245699417 0.748973771398615 2009-Aug-31 23:08:15 LOG4 log_alfabeam: ALFABEAM 5 21.489290609892613 0.825089018552795 2009-Aug-31 23:08:15 LOG4 log_alfabeam: ALFABEAM 6 21.487475170519364 0.927685446176003 2009-Aug-31 23:08:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300195 2009-Aug-31 23:08:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:08:15 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Aug-31 23:08:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:08:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Aug-31 23:08:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:08:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:08:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:08:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Aug-31 23:08:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11296.00 2009-Aug-31 23:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:08:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:08:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:08:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:08:26 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Aug-31 23:08:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:08:26 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Aug-31 23:08:26 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Aug-31 23:08:26 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Aug-31 23:08:26 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Aug-31 23:08:26 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:08:26 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:08:26 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:08:26 LOG2 antvel: Parameters to Doppler: Topocentric 97706 2009 243 0.0 2009-Aug-31 23:08:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:08:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Aug-31 23:08:26 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Aug-31 23:08:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:08:26 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:08:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Aug-31 23:08:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:08:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Aug-31 23:08:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:08:26 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Aug-31 23:08:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Aug-31 23:08:26 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.384919 2009.6679375491167 18.999933 2009-Aug-31 23:08:26 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333317 0.851666666666672 2009-Aug-31 23:08:26 LOG4 log_alfabeam: ALFABEAM 1 21.481571428314414 0.954467208429201 2009-Aug-31 23:08:26 LOG4 log_alfabeam: ALFABEAM 2 21.477400481116931 0.878927423374653 2009-Aug-31 23:08:26 LOG4 log_alfabeam: ALFABEAM 3 21.479140805073822 0.776032932154020 2009-Aug-31 23:08:26 LOG4 log_alfabeam: ALFABEAM 4 21.485108450248102 0.748900321994769 2009-Aug-31 23:08:26 LOG4 log_alfabeam: ALFABEAM 5 21.489285726727648 0.824843965999727 2009-Aug-31 23:08:26 LOG4 log_alfabeam: ALFABEAM 6 21.487489060153898 0.927514703050726 2009-Aug-31 23:08:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300196 2009-Aug-31 23:08:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:08:27 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Aug-31 23:08:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:08:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Aug-31 23:08:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:08:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:08:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:08:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Aug-31 23:08:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11308.00 2009-Aug-31 23:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:08:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:08:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:08:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:08:38 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Aug-31 23:08:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:08:38 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Aug-31 23:08:38 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Aug-31 23:08:38 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Aug-31 23:08:38 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Aug-31 23:08:38 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:08:38 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:08:38 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:08:38 LOG2 antvel: Parameters to Doppler: Topocentric 97718 2009 243 0.0 2009-Aug-31 23:08:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:08:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Aug-31 23:08:38 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Aug-31 23:08:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:08:38 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:08:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Aug-31 23:08:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:08:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Aug-31 23:08:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:08:38 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Aug-31 23:08:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Aug-31 23:08:38 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.388262 2009.6679379293737 18.999933 2009-Aug-31 23:08:38 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333313 0.851666666666663 2009-Aug-31 23:08:38 LOG4 log_alfabeam: ALFABEAM 1 21.481590263172450 0.954539407356864 2009-Aug-31 23:08:38 LOG4 log_alfabeam: ALFABEAM 2 21.477405498236379 0.879171784076850 2009-Aug-31 23:08:38 LOG4 log_alfabeam: ALFABEAM 3 21.479126965327538 0.776205958916930 2009-Aug-31 23:08:38 LOG4 log_alfabeam: ALFABEAM 4 21.485089626087461 0.748827587577512 2009-Aug-31 23:08:38 LOG4 log_alfabeam: ALFABEAM 5 21.489280794649048 0.824598914577085 2009-Aug-31 23:08:38 LOG4 log_alfabeam: ALFABEAM 6 21.487502929897090 0.927343248741776 2009-Aug-31 23:08:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300197 2009-Aug-31 23:08:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:08:39 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Aug-31 23:08:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:08:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Aug-31 23:08:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:08:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:08:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:08:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Aug-31 23:08:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11320.00 2009-Aug-31 23:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:08:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:08:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:50 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2009-Aug-31 23:08:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:08:50 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Aug-31 23:08:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:08:50 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Aug-31 23:08:50 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Aug-31 23:08:50 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Aug-31 23:08:50 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Aug-31 23:08:50 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:08:50 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:08:50 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:08:50 LOG2 antvel: Parameters to Doppler: Topocentric 97730 2009 243 0.0 2009-Aug-31 23:08:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:08:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Aug-31 23:08:50 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Aug-31 23:08:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:08:50 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:08:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Aug-31 23:08:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:08:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Aug-31 23:08:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:08:50 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Aug-31 23:08:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Aug-31 23:08:51 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.391604 2009.6679383096307 18.999933 2009-Aug-31 23:08:51 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333327 0.851666666666670 2009-Aug-31 23:08:51 LOG4 log_alfabeam: ALFABEAM 1 21.481609114859733 0.954610843954081 2009-Aug-31 23:08:51 LOG4 log_alfabeam: ALFABEAM 2 21.477410561021745 0.879415983550864 2009-Aug-31 23:08:51 LOG4 log_alfabeam: ALFABEAM 3 21.479113154747296 0.776379588858584 2009-Aug-31 23:08:51 LOG4 log_alfabeam: ALFABEAM 4 21.485070784894081 0.748755614523188 2009-Aug-31 23:08:51 LOG4 log_alfabeam: ALFABEAM 5 21.489275816652416 0.824354016868487 2009-Aug-31 23:08:51 LOG4 log_alfabeam: ALFABEAM 6 21.487516771082802 0.927171188901609 2009-Aug-31 23:08:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300198 2009-Aug-31 23:08:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:08:51 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Aug-31 23:08:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Aug-31 23:08:51 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:08:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:08:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:08:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:08:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:08:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Aug-31 23:08:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11332.00 2009-Aug-31 23:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:08:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:08:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:08:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:08:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:02 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2009-Aug-31 23:09:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:09:02 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Aug-31 23:09:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:09:02 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Aug-31 23:09:02 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Aug-31 23:09:02 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Aug-31 23:09:02 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Aug-31 23:09:02 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:09:02 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:09:02 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:09:02 LOG2 antvel: Parameters to Doppler: Topocentric 97742 2009 243 0.0 2009-Aug-31 23:09:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:09:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Aug-31 23:09:02 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Aug-31 23:09:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:09:02 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:09:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Aug-31 23:09:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:09:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Aug-31 23:09:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:09:02 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Aug-31 23:09:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Aug-31 23:09:03 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.394947 2009.6679386898877 18.999933 2009-Aug-31 23:09:03 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333331 0.851666666666663 2009-Aug-31 23:09:03 LOG4 log_alfabeam: ALFABEAM 1 21.481627994240039 0.954681558181929 2009-Aug-31 23:09:03 LOG4 log_alfabeam: ALFABEAM 2 21.477415672450071 0.879660161976579 2009-Aug-31 23:09:03 LOG4 log_alfabeam: ALFABEAM 3 21.479099365434916 0.776553922677411 2009-Aug-31 23:09:03 LOG4 log_alfabeam: ALFABEAM 4 21.485051915809734 0.748684362574421 2009-Aug-31 23:09:03 LOG4 log_alfabeam: ALFABEAM 5 21.489270789807087 0.824109132299678 2009-Aug-31 23:09:03 LOG4 log_alfabeam: ALFABEAM 6 21.487530591627056 0.926998423692052 2009-Aug-31 23:09:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300199 2009-Aug-31 23:09:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:09:03 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Aug-31 23:09:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:09:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Aug-31 23:09:03 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:09:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:09:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:09:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:09:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Aug-31 23:09:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11344.00 2009-Aug-31 23:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:09:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:09:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:14 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2009-Aug-31 23:09:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:09:14 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Aug-31 23:09:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:09:14 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Aug-31 23:09:14 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Aug-31 23:09:14 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Aug-31 23:09:14 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Aug-31 23:09:14 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:09:14 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:09:14 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:09:14 LOG2 antvel: Parameters to Doppler: Topocentric 97754 2009 243 0.0 2009-Aug-31 23:09:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:09:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Aug-31 23:09:14 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Aug-31 23:09:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:09:14 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:09:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Aug-31 23:09:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:09:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Aug-31 23:09:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:09:14 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Aug-31 23:09:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Aug-31 23:09:14 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.398289 2009.6679390701449 18.999933 2009-Aug-31 23:09:14 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333348 0.851666666666665 2009-Aug-31 23:09:14 LOG4 log_alfabeam: ALFABEAM 1 21.481646889598558 0.954751504995236 2009-Aug-31 23:09:14 LOG4 log_alfabeam: ALFABEAM 2 21.477420829407063 0.879904167311542 2009-Aug-31 23:09:14 LOG4 log_alfabeam: ALFABEAM 3 21.479085606005157 0.776728852816464 2009-Aug-31 23:09:14 LOG4 log_alfabeam: ALFABEAM 4 21.485033030542230 0.748613877122814 2009-Aug-31 23:09:14 LOG4 log_alfabeam: ALFABEAM 5 21.489265717172191 0.823864413359697 2009-Aug-31 23:09:14 LOG4 log_alfabeam: ALFABEAM 6 21.487544382895535 0.926825059652220 2009-Aug-31 23:09:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300200 2009-Aug-31 23:09:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:09:15 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Aug-31 23:09:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:15 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:15 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:09:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:09:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Aug-31 23:09:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:09:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:09:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:09:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Aug-31 23:09:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11356.00 2009-Aug-31 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:09:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:09:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:26 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2009-Aug-31 23:09:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:09:26 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Aug-31 23:09:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:09:26 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Aug-31 23:09:26 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Aug-31 23:09:26 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Aug-31 23:09:26 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Aug-31 23:09:26 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:09:26 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:09:26 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:09:26 LOG2 antvel: Parameters to Doppler: Topocentric 97766 2009 243 0.0 2009-Aug-31 23:09:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:09:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Aug-31 23:09:26 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Aug-31 23:09:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:09:26 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:09:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Aug-31 23:09:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:09:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Aug-31 23:09:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:09:26 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Aug-31 23:09:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Aug-31 23:09:26 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.401632 2009.6679394504019 18.999933 2009-Aug-31 23:09:26 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333302 0.851666666666666 2009-Aug-31 23:09:26 LOG4 log_alfabeam: ALFABEAM 1 21.481665811820886 0.954820723562505 2009-Aug-31 23:09:26 LOG4 log_alfabeam: ALFABEAM 2 21.477426034919162 0.880148139617128 2009-Aug-31 23:09:26 LOG4 log_alfabeam: ALFABEAM 3 21.479071868587667 0.776904480650334 2009-Aug-31 23:09:26 LOG4 log_alfabeam: ALFABEAM 4 21.485014118211186 0.748544118702490 2009-Aug-31 23:09:26 LOG4 log_alfabeam: ALFABEAM 5 21.489260595767302 0.823619719585058 2009-Aug-31 23:09:26 LOG4 log_alfabeam: ALFABEAM 6 21.487558152776955 0.926650996265333 2009-Aug-31 23:09:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300201 2009-Aug-31 23:09:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:09:27 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Aug-31 23:09:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:09:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Aug-31 23:09:27 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:09:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:09:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:09:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:09:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Aug-31 23:09:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11368.00 2009-Aug-31 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:09:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:09:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:09:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:09:38 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Aug-31 23:09:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:09:38 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Aug-31 23:09:38 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Aug-31 23:09:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Aug-31 23:09:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Aug-31 23:09:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Aug-31 23:09:38 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Aug-31 23:09:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-Aug-31 23:09:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Aug-31 23:09:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Aug-31 23:09:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Aug-31 23:09:38 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Aug-31 23:09:38 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Aug-31 23:09:38 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Aug-31 23:09:38 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Aug-31 23:09:38 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:09:38 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:09:38 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:09:38 LOG2 antvel: Parameters to Doppler: Topocentric 97778 2009 243 0.0 2009-Aug-31 23:09:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:09:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Aug-31 23:09:38 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Aug-31 23:09:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:09:38 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:09:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Aug-31 23:09:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:09:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Aug-31 23:09:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:09:38 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Aug-31 23:09:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Aug-31 23:09:38 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.404974 2009.667939830659 18.999933 2009-Aug-31 23:09:38 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333317 0.851666666666669 2009-Aug-31 23:09:38 LOG4 log_alfabeam: ALFABEAM 1 21.481684749162568 0.954889169833274 2009-Aug-31 23:09:38 LOG4 log_alfabeam: ALFABEAM 2 21.477431285809040 0.880391926973390 2009-Aug-31 23:09:38 LOG4 log_alfabeam: ALFABEAM 3 21.479058161763525 0.777080697746646 2009-Aug-31 23:09:38 LOG4 log_alfabeam: ALFABEAM 4 21.484995190554642 0.748475131712067 2009-Aug-31 23:09:38 LOG4 log_alfabeam: ALFABEAM 5 21.489255428715150 0.823375203353144 2009-Aug-31 23:09:38 LOG4 log_alfabeam: ALFABEAM 6 21.487571892670051 0.926476340948695 2009-Aug-31 23:09:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300202 2009-Aug-31 23:09:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:09:39 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Aug-31 23:09:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:09:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Aug-31 23:09:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:09:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:09:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:09:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Aug-31 23:09:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11380.00 2009-Aug-31 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:09:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:09:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:09:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:09:50 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Aug-31 23:09:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:09:50 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Aug-31 23:09:50 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Aug-31 23:09:50 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Aug-31 23:09:50 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Aug-31 23:09:50 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:09:50 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:09:50 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:09:50 LOG2 antvel: Parameters to Doppler: Topocentric 97790 2009 243 0.0 2009-Aug-31 23:09:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:09:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Aug-31 23:09:50 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Aug-31 23:09:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:09:50 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:09:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Aug-31 23:09:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:09:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Aug-31 23:09:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:09:50 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Aug-31 23:09:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Aug-31 23:09:50 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.408317 2009.667940210916 18.999933 2009-Aug-31 23:09:50 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333338 0.851666666666666 2009-Aug-31 23:09:50 LOG4 log_alfabeam: ALFABEAM 1 21.481703712530127 0.954956882178803 2009-Aug-31 23:09:50 LOG4 log_alfabeam: ALFABEAM 2 21.477436585152404 0.880635669311760 2009-Aug-31 23:09:50 LOG4 log_alfabeam: ALFABEAM 3 21.479044477691016 0.777257606149415 2009-Aug-31 23:09:50 LOG4 log_alfabeam: ALFABEAM 4 21.484976236670949 0.748406877481848 2009-Aug-31 23:09:50 LOG4 log_alfabeam: ALFABEAM 5 21.489250212985620 0.823130724322696 2009-Aug-31 23:09:50 LOG4 log_alfabeam: ALFABEAM 6 21.487585610435410 0.926300992513564 2009-Aug-31 23:09:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300203 2009-Aug-31 23:09:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:09:51 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Aug-31 23:09:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:09:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Aug-31 23:09:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:09:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:09:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:09:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Aug-31 23:09:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11392.00 2009-Aug-31 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:09:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:09:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:09:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:09:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:02 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2009-Aug-31 23:10:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:10:02 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Aug-31 23:10:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:10:02 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Aug-31 23:10:02 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Aug-31 23:10:02 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Aug-31 23:10:02 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Aug-31 23:10:02 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:10:02 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:10:02 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:10:02 LOG2 antvel: Parameters to Doppler: Topocentric 97802 2009 243 0.0 2009-Aug-31 23:10:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:10:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Aug-31 23:10:02 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Aug-31 23:10:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:10:02 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:10:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Aug-31 23:10:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:10:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Aug-31 23:10:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:10:02 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Aug-31 23:10:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Aug-31 23:10:02 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.411659 2009.667940591173 18.999933 2009-Aug-31 23:10:02 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333309 0.851666666666663 2009-Aug-31 23:10:02 LOG4 log_alfabeam: ALFABEAM 1 21.481722690150420 0.955023817551248 2009-Aug-31 23:10:02 LOG4 log_alfabeam: ALFABEAM 2 21.477441929708885 0.880879214851849 2009-Aug-31 23:10:02 LOG4 log_alfabeam: ALFABEAM 3 21.479030824916272 0.777435096560012 2009-Aug-31 23:10:02 LOG4 log_alfabeam: ALFABEAM 4 21.484957268326895 0.748339399409352 2009-Aug-31 23:10:02 LOG4 log_alfabeam: ALFABEAM 5 21.489244951764814 0.822886434742199 2009-Aug-31 23:10:03 LOG4 log_alfabeam: ALFABEAM 6 21.487599297505756 0.926125059246320 2009-Aug-31 23:10:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300204 2009-Aug-31 23:10:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:10:03 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Aug-31 23:10:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:10:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Aug-31 23:10:03 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:10:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:10:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:10:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:10:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Aug-31 23:10:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11404.00 2009-Aug-31 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:10:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:10:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:10:14 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Aug-31 23:10:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:10:14 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Aug-31 23:10:14 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Aug-31 23:10:14 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Aug-31 23:10:14 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Aug-31 23:10:14 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:10:14 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:10:14 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:10:14 LOG2 antvel: Parameters to Doppler: Topocentric 97814 2009 243 0.0 2009-Aug-31 23:10:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:10:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Aug-31 23:10:14 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Aug-31 23:10:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:10:14 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:10:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Aug-31 23:10:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:10:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Aug-31 23:10:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:10:14 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Aug-31 23:10:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Aug-31 23:10:14 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.415002 2009.6679409714302 18.999933 2009-Aug-31 23:10:14 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333313 0.851666666666665 2009-Aug-31 23:10:14 LOG4 log_alfabeam: ALFABEAM 1 21.481741692950322 0.955090013520163 2009-Aug-31 23:10:14 LOG4 log_alfabeam: ALFABEAM 2 21.477447322603417 0.881122703383833 2009-Aug-31 23:10:14 LOG4 log_alfabeam: ALFABEAM 3 21.479017195626959 0.777613271685017 2009-Aug-31 23:10:14 LOG4 log_alfabeam: ALFABEAM 4 21.484938274600601 0.748272659625709 2009-Aug-31 23:10:14 LOG4 log_alfabeam: ALFABEAM 5 21.489239641973267 0.822642194404175 2009-Aug-31 23:10:14 LOG4 log_alfabeam: ALFABEAM 6 21.487612961713108 0.925948439293160 2009-Aug-31 23:10:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300205 2009-Aug-31 23:10:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:10:15 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Aug-31 23:10:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:10:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Aug-31 23:10:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:10:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:10:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:10:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Aug-31 23:10:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11416.00 2009-Aug-31 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:10:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:10:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:10:26 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Aug-31 23:10:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:10:26 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Aug-31 23:10:26 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Aug-31 23:10:26 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Aug-31 23:10:26 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Aug-31 23:10:26 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:10:26 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:10:26 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:10:26 LOG2 antvel: Parameters to Doppler: Topocentric 97826 2009 243 0.0 2009-Aug-31 23:10:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:10:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Aug-31 23:10:26 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Aug-31 23:10:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:10:26 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:10:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Aug-31 23:10:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:10:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Aug-31 23:10:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:10:26 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Aug-31 23:10:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Aug-31 23:10:26 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.418344 2009.6679413516872 18.999933 2009-Aug-31 23:10:26 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333295 0.851666666666666 2009-Aug-31 23:10:26 LOG4 log_alfabeam: ALFABEAM 1 21.481760709129247 0.955155428047999 2009-Aug-31 23:10:26 LOG4 log_alfabeam: ALFABEAM 2 21.477452760532728 0.881365983283935 2009-Aug-31 23:10:26 LOG4 log_alfabeam: ALFABEAM 3 21.479003598333268 0.777792021369004 2009-Aug-31 23:10:26 LOG4 log_alfabeam: ALFABEAM 4 21.484919267286450 0.748206700519503 2009-Aug-31 23:10:26 LOG4 log_alfabeam: ALFABEAM 5 21.489234286860075 0.822398155410977 2009-Aug-31 23:10:26 LOG4 log_alfabeam: ALFABEAM 6 21.487626594525189 0.925771241800252 2009-Aug-31 23:10:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300206 2009-Aug-31 23:10:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:10:27 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Aug-31 23:10:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:10:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Aug-31 23:10:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:10:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:10:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:10:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Aug-31 23:10:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11428.00 2009-Aug-31 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:10:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:10:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:10:38 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Aug-31 23:10:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:10:38 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Aug-31 23:10:38 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Aug-31 23:10:38 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Aug-31 23:10:38 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Aug-31 23:10:38 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:10:38 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:10:38 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:10:38 LOG2 antvel: Parameters to Doppler: Topocentric 97838 2009 243 0.0 2009-Aug-31 23:10:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:10:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Aug-31 23:10:38 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Aug-31 23:10:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:10:38 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:10:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Aug-31 23:10:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:10:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Aug-31 23:10:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:10:38 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Aug-31 23:10:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Aug-31 23:10:38 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.421686 2009.6679417319442 18.999933 2009-Aug-31 23:10:38 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333334 0.851666666666669 2009-Aug-31 23:10:38 LOG4 log_alfabeam: ALFABEAM 1 21.481779743935022 0.955220078667816 2009-Aug-31 23:10:38 LOG4 log_alfabeam: ALFABEAM 2 21.477458245022746 0.881609121459140 2009-Aug-31 23:10:38 LOG4 log_alfabeam: ALFABEAM 3 21.478990029308672 0.777971395208301 2009-Aug-31 23:10:38 LOG4 log_alfabeam: ALFABEAM 4 21.484900241138714 0.748141504420893 2009-Aug-31 23:10:38 LOG4 log_alfabeam: ALFABEAM 5 21.489228884920031 0.822154250661366 2009-Aug-31 23:10:38 LOG4 log_alfabeam: ALFABEAM 6 21.487640199677799 0.925593417558102 2009-Aug-31 23:10:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300207 2009-Aug-31 23:10:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:10:39 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Aug-31 23:10:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:10:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Aug-31 23:10:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:10:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:10:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:10:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Aug-31 23:10:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11440.00 2009-Aug-31 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:10:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:50 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2009-Aug-31 23:10:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:10:50 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Aug-31 23:10:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:10:50 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Aug-31 23:10:50 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Aug-31 23:10:50 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Aug-31 23:10:50 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Aug-31 23:10:50 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:10:50 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:10:50 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:10:50 LOG2 antvel: Parameters to Doppler: Topocentric 97850 2009 243 0.0 2009-Aug-31 23:10:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:10:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Aug-31 23:10:50 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Aug-31 23:10:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:10:50 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:10:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Aug-31 23:10:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:10:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Aug-31 23:10:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:10:50 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Aug-31 23:10:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Aug-31 23:10:50 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.425029 2009.6679421122012 18.999933 2009-Aug-31 23:10:50 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333295 0.851666666666663 2009-Aug-31 23:10:50 LOG4 log_alfabeam: ALFABEAM 1 21.481798802636014 0.955283982050837 2009-Aug-31 23:10:50 LOG4 log_alfabeam: ALFABEAM 2 21.477463777651714 0.881852184650925 2009-Aug-31 23:10:50 LOG4 log_alfabeam: ALFABEAM 3 21.478976484858872 0.778151443497650 2009-Aug-31 23:10:50 LOG4 log_alfabeam: ALFABEAM 4 21.484881190890970 0.748077054520874 2009-Aug-31 23:10:50 LOG4 log_alfabeam: ALFABEAM 5 21.489223434595097 0.821910413211355 2009-Aug-31 23:10:50 LOG4 log_alfabeam: ALFABEAM 6 21.487653780875142 0.925414916655765 2009-Aug-31 23:10:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300208 2009-Aug-31 23:10:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:10:51 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Aug-31 23:10:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:10:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Aug-31 23:10:51 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:10:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:10:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:10:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:10:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Aug-31 23:10:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11452.00 2009-Aug-31 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:10:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:10:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:10:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:10:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:02 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2009-Aug-31 23:11:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:11:02 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Aug-31 23:11:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:11:02 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Aug-31 23:11:02 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Aug-31 23:11:02 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Aug-31 23:11:02 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Aug-31 23:11:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Aug-31 23:11:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Aug-31 23:11:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Aug-31 23:11:02 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Aug-31 23:11:02 LOG3 CALCONTROL-caltrig: Software trigger 2009-Aug-31 23:11:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Aug-31 23:11:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Aug-31 23:11:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Aug-31 23:11:02 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Aug-31 23:11:02 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Aug-31 23:11:02 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Aug-31 23:11:02 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Aug-31 23:11:02 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Aug-31 23:11:02 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:11:02 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:11:02 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:11:02 LOG2 antvel: Parameters to Doppler: Topocentric 97862 2009 243 0.0 2009-Aug-31 23:11:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:11:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Aug-31 23:11:03 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Aug-31 23:11:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:11:03 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:11:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Aug-31 23:11:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:11:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Aug-31 23:11:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:11:03 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Aug-31 23:11:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Aug-31 23:11:03 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.428371 2009.6679424924585 18.999933 2009-Aug-31 23:11:03 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333313 0.851666666666668 2009-Aug-31 23:11:03 LOG4 log_alfabeam: ALFABEAM 1 21.481817873392878 0.955347097688735 2009-Aug-31 23:11:03 LOG4 log_alfabeam: ALFABEAM 2 21.477469355022432 0.882095021502651 2009-Aug-31 23:11:03 LOG4 log_alfabeam: ALFABEAM 3 21.478962973438275 0.778332054815304 2009-Aug-31 23:11:03 LOG4 log_alfabeam: ALFABEAM 4 21.484862128376847 0.748013391680872 2009-Aug-31 23:11:03 LOG4 log_alfabeam: ALFABEAM 5 21.489217939228894 0.821666794911926 2009-Aug-31 23:11:03 LOG4 log_alfabeam: ALFABEAM 6 21.487667329639692 0.925235849510885 2009-Aug-31 23:11:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300209 2009-Aug-31 23:11:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:11:03 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Aug-31 23:11:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:11:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Aug-31 23:11:03 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:11:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:11:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:11:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:11:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Aug-31 23:11:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11464.00 2009-Aug-31 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:11:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:11:14 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Aug-31 23:11:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:11:14 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Aug-31 23:11:14 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Aug-31 23:11:14 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Aug-31 23:11:14 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Aug-31 23:11:14 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:11:14 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:11:14 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:11:14 LOG2 antvel: Parameters to Doppler: Topocentric 97874 2009 243 0.0 2009-Aug-31 23:11:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:11:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Aug-31 23:11:14 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Aug-31 23:11:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:11:14 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:11:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Aug-31 23:11:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:11:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Aug-31 23:11:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:11:14 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Aug-31 23:11:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Aug-31 23:11:14 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.431714 2009.6679428727155 18.999933 2009-Aug-31 23:11:14 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333313 0.851666666666665 2009-Aug-31 23:11:14 LOG4 log_alfabeam: ALFABEAM 1 21.481836967179294 0.955409461127909 2009-Aug-31 23:11:14 LOG4 log_alfabeam: ALFABEAM 2 21.477474980382052 0.882337771401390 2009-Aug-31 23:11:14 LOG4 log_alfabeam: ALFABEAM 3 21.478949487310622 0.778513333492543 2009-Aug-31 23:11:14 LOG4 log_alfabeam: ALFABEAM 4 21.484843042627009 0.747950480053044 2009-Aug-31 23:11:14 LOG4 log_alfabeam: ALFABEAM 5 21.489212395619134 0.821423255940072 2009-Aug-31 23:11:14 LOG4 log_alfabeam: ALFABEAM 6 21.487680853728584 0.925056112637863 2009-Aug-31 23:11:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300210 2009-Aug-31 23:11:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:11:15 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Aug-31 23:11:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:11:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Aug-31 23:11:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:11:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:11:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:11:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Aug-31 23:11:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11476.00 2009-Aug-31 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:11:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:11:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:11:26 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Aug-31 23:11:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:11:26 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Aug-31 23:11:26 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Aug-31 23:11:26 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Aug-31 23:11:26 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Aug-31 23:11:26 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:11:26 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:11:26 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:11:26 LOG2 antvel: Parameters to Doppler: Topocentric 97886 2009 243 0.0 2009-Aug-31 23:11:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:11:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Aug-31 23:11:26 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Aug-31 23:11:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:11:26 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:11:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Aug-31 23:11:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:11:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Aug-31 23:11:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:11:26 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Aug-31 23:11:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Aug-31 23:11:26 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.435056 2009.6679432529725 18.999933 2009-Aug-31 23:11:26 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333320 0.851666666666668 2009-Aug-31 23:11:26 LOG4 log_alfabeam: ALFABEAM 1 21.481856072131528 0.955471032888188 2009-Aug-31 23:11:26 LOG4 log_alfabeam: ALFABEAM 2 21.477480650271097 0.882580283189835 2009-Aug-31 23:11:26 LOG4 log_alfabeam: ALFABEAM 3 21.478936034892101 0.778695167276165 2009-Aug-31 23:11:26 LOG4 log_alfabeam: ALFABEAM 4 21.484823945499841 0.747888359471774 2009-Aug-31 23:11:26 LOG4 log_alfabeam: ALFABEAM 5 21.489206807172099 0.821179947957684 2009-Aug-31 23:11:26 LOG4 log_alfabeam: ALFABEAM 6 21.487694344701747 0.924875817289393 2009-Aug-31 23:11:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300211 2009-Aug-31 23:11:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:11:27 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Aug-31 23:11:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:11:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Aug-31 23:11:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:11:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:11:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:11:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Aug-31 23:11:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11488.00 2009-Aug-31 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:11:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:11:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:11:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:11:38 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Aug-31 23:11:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:11:38 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Aug-31 23:11:38 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Aug-31 23:11:38 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Aug-31 23:11:38 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Aug-31 23:11:38 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:11:38 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:11:38 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:11:38 LOG2 antvel: Parameters to Doppler: Topocentric 97898 2009 243 0.0 2009-Aug-31 23:11:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:11:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Aug-31 23:11:38 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Aug-31 23:11:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:11:38 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:11:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Aug-31 23:11:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:11:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Aug-31 23:11:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:11:38 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Aug-31 23:11:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Aug-31 23:11:38 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.438399 2009.6679436332295 18.999933 2009-Aug-31 23:11:38 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333267 0.851666666666669 2009-Aug-31 23:11:38 LOG4 log_alfabeam: ALFABEAM 1 21.481875199240516 0.955531847699708 2009-Aug-31 23:11:38 LOG4 log_alfabeam: ALFABEAM 2 21.477486367985222 0.882822696073995 2009-Aug-31 23:11:38 LOG4 log_alfabeam: ALFABEAM 3 21.478922608477877 0.778877661134394 2009-Aug-31 23:11:38 LOG4 log_alfabeam: ALFABEAM 4 21.484804826008446 0.747826994904869 2009-Aug-31 23:11:38 LOG4 log_alfabeam: ALFABEAM 5 21.489201170636548 0.820936731315540 2009-Aug-31 23:11:38 LOG4 log_alfabeam: ALFABEAM 6 21.487707810285418 0.924694859339912 2009-Aug-31 23:11:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300212 2009-Aug-31 23:11:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:11:39 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Aug-31 23:11:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:11:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Aug-31 23:11:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:11:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:11:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:11:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Aug-31 23:11:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11500.00 2009-Aug-31 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:11:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:11:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:11:50 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Aug-31 23:11:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:11:50 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Aug-31 23:11:50 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Aug-31 23:11:50 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Aug-31 23:11:50 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Aug-31 23:11:50 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:11:50 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:11:50 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:11:50 LOG2 antvel: Parameters to Doppler: Topocentric 97910 2009 243 0.0 2009-Aug-31 23:11:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:11:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Aug-31 23:11:50 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Aug-31 23:11:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:11:50 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:11:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Aug-31 23:11:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:11:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Aug-31 23:11:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:11:50 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Aug-31 23:11:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Aug-31 23:11:50 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.441741 2009.6679440134865 18.999933 2009-Aug-31 23:11:50 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333285 0.851666666666669 2009-Aug-31 23:11:50 LOG4 log_alfabeam: ALFABEAM 1 21.481894336619629 0.955591867116986 2009-Aug-31 23:11:50 LOG4 log_alfabeam: ALFABEAM 2 21.477492130002965 0.883064859113043 2009-Aug-31 23:11:50 LOG4 log_alfabeam: ALFABEAM 3 21.478909216444794 0.779060701993179 2009-Aug-31 23:11:50 LOG4 log_alfabeam: ALFABEAM 4 21.484785696034535 0.747766425153117 2009-Aug-31 23:11:50 LOG4 log_alfabeam: ALFABEAM 5 21.489195489481439 0.820693757469337 2009-Aug-31 23:11:50 LOG4 log_alfabeam: ALFABEAM 6 21.487721242078248 0.924513350866882 2009-Aug-31 23:11:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300213 2009-Aug-31 23:11:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:11:51 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Aug-31 23:11:51 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:11:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Aug-31 23:11:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:11:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:11:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:11:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Aug-31 23:11:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11512.00 2009-Aug-31 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:11:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:11:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:54 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:11:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:02 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2009-Aug-31 23:12:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:12:02 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Aug-31 23:12:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:12:02 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Aug-31 23:12:02 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Aug-31 23:12:02 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Aug-31 23:12:02 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Aug-31 23:12:02 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:12:02 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:12:02 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:12:02 LOG2 antvel: Parameters to Doppler: Topocentric 97922 2009 243 0.0 2009-Aug-31 23:12:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:12:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Aug-31 23:12:02 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Aug-31 23:12:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:12:02 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:12:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Aug-31 23:12:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:12:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Aug-31 23:12:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:12:02 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Aug-31 23:12:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Aug-31 23:12:02 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.445084 2009.6679443937437 18.999933 2009-Aug-31 23:12:02 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333320 0.851666666666664 2009-Aug-31 23:12:02 LOG4 log_alfabeam: ALFABEAM 1 21.481913495276121 0.955651125050053 2009-Aug-31 23:12:02 LOG4 log_alfabeam: ALFABEAM 2 21.477497939668204 0.883306911320537 2009-Aug-31 23:12:02 LOG4 log_alfabeam: ALFABEAM 3 21.478895851120267 0.779244395450078 2009-Aug-31 23:12:02 LOG4 log_alfabeam: ALFABEAM 4 21.484766544574661 0.747706616003740 2009-Aug-31 23:12:03 LOG4 log_alfabeam: ALFABEAM 5 21.489189760406742 0.820450886954982 2009-Aug-31 23:12:03 LOG4 log_alfabeam: ALFABEAM 6 21.487734647774722 0.924331187112196 2009-Aug-31 23:12:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300214 2009-Aug-31 23:12:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:12:03 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Aug-31 23:12:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:12:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Aug-31 23:12:03 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:12:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:12:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:12:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:12:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Aug-31 23:12:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11524.00 2009-Aug-31 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:12:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:07 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:09 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:12:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:12:14 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Aug-31 23:12:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:12:14 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Aug-31 23:12:14 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Aug-31 23:12:14 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Aug-31 23:12:14 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Aug-31 23:12:14 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:12:14 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66794 J 2009-Aug-31 23:12:14 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:12:14 LOG2 antvel: Parameters to Doppler: Topocentric 97934 2009 243 0.0 2009-Aug-31 23:12:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:12:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Aug-31 23:12:14 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Aug-31 23:12:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:12:14 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:12:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Aug-31 23:12:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:12:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Aug-31 23:12:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:12:14 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Aug-31 23:12:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Aug-31 23:12:14 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.448426 2009.6679447740007 18.999933 2009-Aug-31 23:12:14 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333285 0.851666666666668 2009-Aug-31 23:12:14 LOG4 log_alfabeam: ALFABEAM 1 21.481932663301468 0.955709584094382 2009-Aug-31 23:12:14 LOG4 log_alfabeam: ALFABEAM 2 21.477503793397712 0.883548701989161 2009-Aug-31 23:12:14 LOG4 log_alfabeam: ALFABEAM 3 21.478882520840489 0.779428627621203 2009-Aug-31 23:12:14 LOG4 log_alfabeam: ALFABEAM 4 21.484747383532593 0.747647605217605 2009-Aug-31 23:12:14 LOG4 log_alfabeam: ALFABEAM 5 21.489183986943559 0.820208271004804 2009-Aug-31 23:12:14 LOG4 log_alfabeam: ALFABEAM 6 21.487748019013083 0.924148480967296 2009-Aug-31 23:12:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300215 2009-Aug-31 23:12:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:12:15 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Aug-31 23:12:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:12:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Aug-31 23:12:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:12:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:12:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:12:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Aug-31 23:12:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11536.00 2009-Aug-31 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:12:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:12:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:18 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:20 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:26 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:12:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:12:26 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Aug-31 23:12:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:12:26 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Aug-31 23:12:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Aug-31 23:12:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Aug-31 23:12:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Aug-31 23:12:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Aug-31 23:12:26 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Aug-31 23:12:26 LOG3 CALCONTROL-caltrig: Software trigger 2009-Aug-31 23:12:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Aug-31 23:12:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Aug-31 23:12:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Aug-31 23:12:26 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Aug-31 23:12:26 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Aug-31 23:12:26 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Aug-31 23:12:26 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Aug-31 23:12:26 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:12:26 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66795 J 2009-Aug-31 23:12:26 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:12:26 LOG2 antvel: Parameters to Doppler: Topocentric 97946 2009 243 0.0 2009-Aug-31 23:12:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:12:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Aug-31 23:12:26 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Aug-31 23:12:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:12:26 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:12:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Aug-31 23:12:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:12:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Aug-31 23:12:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:12:26 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Aug-31 23:12:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Aug-31 23:12:26 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.451769 2009.6679451542577 18.999933 2009-Aug-31 23:12:26 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333331 0.851666666666664 2009-Aug-31 23:12:26 LOG4 log_alfabeam: ALFABEAM 1 21.481951851718517 0.955767277336334 2009-Aug-31 23:12:26 LOG4 log_alfabeam: ALFABEAM 2 21.477509694583635 0.883790369928773 2009-Aug-31 23:12:26 LOG4 log_alfabeam: ALFABEAM 3 21.478869217966153 0.779613504725623 2009-Aug-31 23:12:26 LOG4 log_alfabeam: ALFABEAM 4 21.484728201889222 0.747589359404949 2009-Aug-31 23:12:26 LOG4 log_alfabeam: ALFABEAM 5 21.489178165743692 0.819965770351238 2009-Aug-31 23:12:26 LOG4 log_alfabeam: ALFABEAM 6 21.487761363455569 0.923965127049242 2009-Aug-31 23:12:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300216 2009-Aug-31 23:12:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:12:27 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Aug-31 23:12:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:12:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Aug-31 23:12:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:12:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:12:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:12:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Aug-31 23:12:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11548.00 2009-Aug-31 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:12:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:12:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:12:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:12:38 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Aug-31 23:12:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:12:38 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Aug-31 23:12:38 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Aug-31 23:12:38 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Aug-31 23:12:38 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Aug-31 23:12:38 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:12:38 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66795 J 2009-Aug-31 23:12:38 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:12:38 LOG2 antvel: Parameters to Doppler: Topocentric 97958 2009 243 0.0 2009-Aug-31 23:12:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:12:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Aug-31 23:12:38 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Aug-31 23:12:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:12:38 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:12:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Aug-31 23:12:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:12:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Aug-31 23:12:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:12:38 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Aug-31 23:12:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Aug-31 23:12:38 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.455111 2009.6679455345147 18.999933 2009-Aug-31 23:12:38 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333249 0.851666666666668 2009-Aug-31 23:12:38 LOG4 log_alfabeam: ALFABEAM 1 21.481971048598126 0.955824168418173 2009-Aug-31 23:12:38 LOG4 log_alfabeam: ALFABEAM 2 21.477515639581021 0.884031764682486 2009-Aug-31 23:12:38 LOG4 log_alfabeam: ALFABEAM 3 21.478855950791665 0.779798912080834 2009-Aug-31 23:12:38 LOG4 log_alfabeam: ALFABEAM 4 21.484709011568921 0.747531915280860 2009-Aug-31 23:12:38 LOG4 log_alfabeam: ALFABEAM 5 21.489172300399755 0.819723535986166 2009-Aug-31 23:12:38 LOG4 log_alfabeam: ALFABEAM 6 21.487774672780954 0.923781239052470 2009-Aug-31 23:12:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300217 2009-Aug-31 23:12:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:12:39 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Aug-31 23:12:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:39 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:12:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Aug-31 23:12:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:12:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:12:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:12:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Aug-31 23:12:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11560.00 2009-Aug-31 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:12:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:12:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:45 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:49 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:50 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:12:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:12:50 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Aug-31 23:12:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:12:50 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Aug-31 23:12:50 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Aug-31 23:12:50 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Aug-31 23:12:50 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Aug-31 23:12:50 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:12:50 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66795 J 2009-Aug-31 23:12:50 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:12:50 LOG2 antvel: Parameters to Doppler: Topocentric 97970 2009 243 0.0 2009-Aug-31 23:12:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:12:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Aug-31 23:12:50 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Aug-31 23:12:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:12:50 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:12:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Aug-31 23:12:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:12:50 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Aug-31 23:12:50 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:12:50 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Aug-31 23:12:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Aug-31 23:12:50 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.458454 2009.6679459147717 18.999933 2009-Aug-31 23:12:50 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333260 0.851666666666672 2009-Aug-31 23:12:50 LOG4 log_alfabeam: ALFABEAM 1 21.481990264977988 0.955880289599212 2009-Aug-31 23:12:50 LOG4 log_alfabeam: ALFABEAM 2 21.477521631830037 0.884273024845234 2009-Aug-31 23:12:50 LOG4 log_alfabeam: ALFABEAM 3 21.478842711711319 0.779984956519505 2009-Aug-31 23:12:50 LOG4 log_alfabeam: ALFABEAM 4 21.484689801537815 0.747475240282004 2009-Aug-31 23:12:50 LOG4 log_alfabeam: ALFABEAM 5 21.489166387515503 0.819481428849870 2009-Aug-31 23:12:50 LOG4 log_alfabeam: ALFABEAM 6 21.487787954618391 0.923596710976971 2009-Aug-31 23:12:50 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300218 2009-Aug-31 23:12:51 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:12:51 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Aug-31 23:12:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:12:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Aug-31 23:12:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:12:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:12:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:12:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Aug-31 23:12:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11572.00 2009-Aug-31 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:12:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:12:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:53 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:55 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:56 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:57 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:58 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:12:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:12:59 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:00 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:01 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:02 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2009-Aug-31 23:13:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:02 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:02 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:13:02 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Aug-31 23:13:02 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:13:02 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Aug-31 23:13:02 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Aug-31 23:13:02 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Aug-31 23:13:02 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Aug-31 23:13:02 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:13:02 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66795 J 2009-Aug-31 23:13:02 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:13:02 LOG2 antvel: Parameters to Doppler: Topocentric 97982 2009 243 0.0 2009-Aug-31 23:13:02 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:13:02 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Aug-31 23:13:02 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Aug-31 23:13:02 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:13:02 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:13:02 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Aug-31 23:13:02 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:13:02 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Aug-31 23:13:02 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:13:02 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Aug-31 23:13:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Aug-31 23:13:03 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.461796 2009.667946295029 18.999933 2009-Aug-31 23:13:03 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333260 0.851666666666664 2009-Aug-31 23:13:03 LOG4 log_alfabeam: ALFABEAM 1 21.482009488909910 0.955935605573995 2009-Aug-31 23:13:03 LOG4 log_alfabeam: ALFABEAM 2 21.477527667624674 0.884514000227491 2009-Aug-31 23:13:03 LOG4 log_alfabeam: ALFABEAM 3 21.478829508977455 0.780171522572070 2009-Aug-31 23:13:03 LOG4 log_alfabeam: ALFABEAM 4 21.484670583739998 0.747419370072068 2009-Aug-31 23:13:03 LOG4 log_alfabeam: ALFABEAM 5 21.489160430745581 0.819239599676787 2009-Aug-31 23:13:03 LOG4 log_alfabeam: ALFABEAM 6 21.487801200688633 0.923411657308830 2009-Aug-31 23:13:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300219 2009-Aug-31 23:13:03 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:13:03 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Aug-31 23:13:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:13:03 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Aug-31 23:13:03 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:13:03 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:13:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:13:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:13:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Aug-31 23:13:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11584.00 2009-Aug-31 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:13:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:05 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:06 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:08 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:10 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:11 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:12 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:13 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:14 INFO1 WAPP=1+2+3-start_spectra: DONE with spectral line observation 2009-Aug-31 23:13:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:14 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:14 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:13:14 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Aug-31 23:13:14 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:13:14 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Aug-31 23:13:14 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Aug-31 23:13:14 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Aug-31 23:13:14 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Aug-31 23:13:14 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:13:14 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66795 J 2009-Aug-31 23:13:14 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:13:14 LOG2 antvel: Parameters to Doppler: Topocentric 97994 2009 243 0.0 2009-Aug-31 23:13:14 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:13:14 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Aug-31 23:13:14 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Aug-31 23:13:14 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:13:14 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:13:14 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Aug-31 23:13:14 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:13:14 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Aug-31 23:13:14 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:13:14 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Aug-31 23:13:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Aug-31 23:13:14 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.465138 2009.667946675286 18.999933 2009-Aug-31 23:13:14 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333238 0.851666666666668 2009-Aug-31 23:13:14 LOG4 log_alfabeam: ALFABEAM 1 21.482028725686977 0.955990131574512 2009-Aug-31 23:13:14 LOG4 log_alfabeam: ALFABEAM 2 21.477533748626129 0.884754757191500 2009-Aug-31 23:13:14 LOG4 log_alfabeam: ALFABEAM 3 21.478816338954189 0.780358661595264 2009-Aug-31 23:13:14 LOG4 log_alfabeam: ALFABEAM 4 21.484651352883333 0.747364289280547 2009-Aug-31 23:13:14 LOG4 log_alfabeam: ALFABEAM 5 21.489154428448067 0.818997981891361 2009-Aug-31 23:13:14 LOG4 log_alfabeam: ALFABEAM 6 21.487814414637931 0.923226027069427 2009-Aug-31 23:13:14 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300220 2009-Aug-31 23:13:15 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:13:15 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Aug-31 23:13:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:13:15 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Aug-31 23:13:15 INFO1 WAPP=4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:13:15 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:13:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:13:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:13:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Aug-31 23:13:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11596.00 2009-Aug-31 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:13:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:13:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:17 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:19 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:21 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:22 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:23 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:24 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:25 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:13:26 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:13:26 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Aug-31 23:13:26 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:13:26 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Aug-31 23:13:26 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Aug-31 23:13:26 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Aug-31 23:13:26 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Aug-31 23:13:26 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:13:26 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66795 J 2009-Aug-31 23:13:26 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:13:26 LOG2 antvel: Parameters to Doppler: Topocentric 98006 2009 243 0.0 2009-Aug-31 23:13:26 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:13:26 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Aug-31 23:13:26 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Aug-31 23:13:26 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:13:26 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:13:26 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Aug-31 23:13:26 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:13:26 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Aug-31 23:13:26 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:13:26 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Aug-31 23:13:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Aug-31 23:13:26 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.468481 2009.667947055543 18.999933 2009-Aug-31 23:13:26 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333285 0.851666666666668 2009-Aug-31 23:13:26 LOG4 log_alfabeam: ALFABEAM 1 21.482047980617093 0.956043881943796 2009-Aug-31 23:13:26 LOG4 log_alfabeam: ALFABEAM 2 21.477539876546647 0.884995361851556 2009-Aug-31 23:13:26 LOG4 log_alfabeam: ALFABEAM 3 21.478803198042744 0.780546425588656 2009-Aug-31 23:13:26 LOG4 log_alfabeam: ALFABEAM 4 21.484632103661966 0.747309983425296 2009-Aug-31 23:13:26 LOG4 log_alfabeam: ALFABEAM 5 21.489148378930508 0.818756509158297 2009-Aug-31 23:13:26 LOG4 log_alfabeam: ALFABEAM 6 21.487827600076766 0.923039768633412 2009-Aug-31 23:13:26 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300221 2009-Aug-31 23:13:27 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:13:27 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Aug-31 23:13:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:13:27 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Aug-31 23:13:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:27 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:27 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:13:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:13:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:13:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Aug-31 23:13:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11608.00 2009-Aug-31 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:13:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:29 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:30 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:31 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:32 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:33 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:34 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:35 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:36 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:37 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:13:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:38 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:38 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:13:38 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Aug-31 23:13:38 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:13:38 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Aug-31 23:13:38 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Aug-31 23:13:38 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Aug-31 23:13:38 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Aug-31 23:13:38 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:13:38 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66795 J 2009-Aug-31 23:13:38 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:13:38 LOG2 antvel: Parameters to Doppler: Topocentric 98018 2009 243 0.0 2009-Aug-31 23:13:38 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:13:38 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Aug-31 23:13:38 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Aug-31 23:13:38 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:13:38 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:13:38 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Aug-31 23:13:38 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:13:38 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Aug-31 23:13:38 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Aug-31 23:13:38 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Aug-31 23:13:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Aug-31 23:13:38 LOG5 log_alfabeam: Parameters: 21.483333333333334 0.85166666666666668 21.471823 2009.6679474358 18.999933 2009-Aug-31 23:13:38 LOG4 log_alfabeam: ALFABEAM 0 21.483333333333270 0.851666666666665 2009-Aug-31 23:13:38 LOG4 log_alfabeam: ALFABEAM 1 21.482067241725403 0.956096822964202 2009-Aug-31 23:13:38 LOG4 log_alfabeam: ALFABEAM 2 21.477546047588987 0.885235664450691 2009-Aug-31 23:13:38 LOG4 log_alfabeam: ALFABEAM 3 21.478790094429815 0.780734697924138 2009-Aug-31 23:13:38 LOG4 log_alfabeam: ALFABEAM 4 21.484612848046353 0.747256486583381 2009-Aug-31 23:13:38 LOG4 log_alfabeam: ALFABEAM 5 21.489142285938883 0.818515331794172 2009-Aug-31 23:13:38 LOG4 log_alfabeam: ALFABEAM 6 21.487840748789566 0.922852997652702 2009-Aug-31 23:13:38 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924300222 2009-Aug-31 23:13:39 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Aug-31 23:13:39 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Aug-31 23:13:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:13:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Aug-31 23:13:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:13:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:13:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:13:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Aug-31 23:13:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11620.00 2009-Aug-31 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:13:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:13:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:41 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:42 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:43 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:44 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:46 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:47 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999966 != 99999964 diff = 2)! 2009-Aug-31 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 1 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 2 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 3 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 4 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 5 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 6 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 7 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 8 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 9 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 10 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 11 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 12 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 13 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 14 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:48 LOG3 WAPP=4-chip_count: Counts don't match between chip 0 and chip 15 (99999964 != 99999966 diff = 2)! 2009-Aug-31 23:13:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:13:50 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Aug-31 23:13:50 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Aug-31 23:13:50 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Aug-31 23:13:50 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Aug-31 23:13:50 INFO2 smartfreq: Switching off CAL 2009-Aug-31 23:13:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Aug-31 23:13:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Aug-31 23:13:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Aug-31 23:13:50 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Aug-31 23:13:50 LOG3 CALCONTROL-caltrig: Software trigger 2009-Aug-31 23:13:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Aug-31 23:13:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Aug-31 23:13:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Aug-31 23:13:50 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Aug-31 23:13:50 INFO3 restore_frequencies: Restoring original frequencies 2009-Aug-31 23:13:50 LOG5 antvel: Calling 'antvel 212900.000000 5106.000000 J Topocentric 0' 2009-Aug-31 23:13:50 LOG2 antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66795 J 2009-Aug-31 23:13:50 LOG2 antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:13:50 LOG2 antvel: Parameters to Doppler: Topocentric 98030 2009 243 0.0 2009-Aug-31 23:13:50 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:13:50 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Aug-31 23:13:50 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Aug-31 23:13:50 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:13:50 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:13:50 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Aug-31 23:13:50 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:13:50 STOP finish_task: Finishing task 'smart frequency switching' 2009-Aug-31 23:13:50 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Aug-31 23:13:50 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Aug-31 23:13:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Aug-31 23:13:50 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Aug-31 23:13:50 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Aug-31 23:13:50 NOTE run_command_file: DONE with command file processing 2009-Aug-31 23:13:50 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Aug-31 23:13:50 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Aug-31 23:13:50 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Aug-31 23:13:50 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Aug-31 23:13:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Aug-31 23:13:51 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Aug-31 23:13:51 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Aug-31 23:13:51 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Aug-31 23:13:51 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:13:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:13:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:14:00 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Aug-31 23:14:00 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Aug-31 23:14:00 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Aug-31 23:14:00 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Aug-31 23:14:00 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Aug-31 23:14:00 NOTE restart_wapp: Restarting all WAPPs 2009-Aug-31 23:14:00 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Aug-31 23:14:00 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Aug-31 23:14:00 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Aug-31 23:14:00 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Aug-31 23:14:00 LOG3 exec_msg: Closing socket 2009-Aug-31 23:14:00 LOG3 exec_msg: Closing socket 2009-Aug-31 23:14:00 LOG3 exec_msg: Closing socket 2009-Aug-31 23:14:00 LOG3 exec_msg: Closing socket 2009-Aug-31 23:14:02 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Aug-31 23:14:02 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Aug-31 23:14:02 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Aug-31 23:14:03 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Aug-31 23:14:10 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360_2009.conf' 2009-Aug-31 23:14:11 LOG2 CIMA-antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66795 J 2009-Aug-31 23:14:11 LOG2 CIMA-antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Aug-31 23:14:11 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 98051 2009 243 0.0 2009-Aug-31 23:14:11 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:14:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Aug-31 23:14:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Aug-31 23:14:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Aug-31 23:14:11 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Aug-31 23:14:12 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Aug-31 23:14:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Aug-31 23:14:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Aug-31 23:14:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Aug-31 23:14:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Aug-31 23:14:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Aug-31 23:14:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Aug-31 23:14:13 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Aug-31 23:14:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Aug-31 23:14:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Aug-31 23:14:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Aug-31 23:14:13 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Aug-31 23:14:13 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Aug-31 23:14:13 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Aug-31 23:14:13 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Aug-31 23:14:13 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Aug-31 23:14:13 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Aug-31 23:14:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Aug-31 23:14:13 LOG1 config_iflo: Receiver ALFA already selected 2009-Aug-31 23:14:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Aug-31 23:14:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Aug-31 23:14:13 START begin_task: Starting task 'waiting on command to ALFA' 2009-Aug-31 23:14:13 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Aug-31 23:14:13 LOG4 got_alfamon: From ALFAMON: ACK 2009-Aug-31 23:14:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Aug-31 23:14:13 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Aug-31 23:14:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Aug-31 23:14:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Aug-31 23:14:13 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Aug-31 23:14:13 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Aug-31 23:14:13 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Aug-31 23:14:13 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Aug-31 23:14:13 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Aug-31 23:14:13 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Aug-31 23:14:13 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Aug-31 23:14:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Aug-31 23:14:13 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Aug-31 23:14:13 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Aug-31 23:14:13 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Aug-31 23:14:13 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Aug-31 23:14:13 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Aug-31 23:14:13 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Aug-31 23:14:13 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Aug-31 23:14:13 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Aug-31 23:14:13 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Aug-31 23:14:13 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Aug-31 23:14:13 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Aug-31 23:14:13 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Aug-31 23:14:13 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Aug-31 23:14:13 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Aug-31 23:14:13 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Aug-31 23:14:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:14:13 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Aug-31 23:14:13 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Aug-31 23:14:13 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Aug-31 23:14:13 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Aug-31 23:14:13 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Aug-31 23:14:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Aug-31 23:14:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:14:13 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Aug-31 23:14:13 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Aug-31 23:14:13 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Aug-31 23:14:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Aug-31 23:14:13 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:14:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:14:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:14:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:14:13 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Aug-31 23:14:13 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Aug-31 23:14:13 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Aug-31 23:14:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Aug-31 23:14:13 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Aug-31 23:14:13 LOG5 finish_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Aug-31 23:14:13 DONE finish_task: DONE finished configuration: IF/LO path 2009-Aug-31 23:14:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Aug-31 23:14:14 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Aug-31 23:14:14 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Aug-31 23:14:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:14:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Aug-31 23:14:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Aug-31 23:14:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Aug-31 23:14:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Aug-31 23:14:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Aug-31 23:14:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Aug-31 23:14:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Aug-31 23:14:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Aug-31 23:14:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Aug-31 23:14:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Aug-31 23:14:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Aug-31 23:14:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Aug-31 23:14:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Aug-31 23:14:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Aug-31 23:14:14 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Aug-31 23:14:14 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Aug-31 23:14:14 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Aug-31 23:14:14 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Aug-31 23:14:14 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Aug-31 23:14:14 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Aug-31 23:14:14 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Aug-31 23:14:14 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Aug-31 23:14:14 START begin_task: Starting task 'selecting calibration port' 2009-Aug-31 23:14:14 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Aug-31 23:14:14 LOG3 vw_send: To DATATAKING: calport 3 2009-Aug-31 23:14:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Aug-31 23:14:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:14:14 START begin_task: Starting task 'waiting on calport' 2009-Aug-31 23:14:14 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Aug-31 23:14:14 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Aug-31 23:14:14 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Aug-31 23:14:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:14:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:14:15 LOG4 got_cormsg: From DATATAKING: DONE 2009-Aug-31 23:14:15 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Aug-31 23:14:15 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Aug-31 23:14:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Aug-31 23:14:15 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Aug-31 23:14:15 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Aug-31 23:14:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Aug-31 23:14:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Aug-31 23:14:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Aug-31 23:14:15 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Aug-31 23:14:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:14:15 LOG3 CALCONTROL-caltrig: Software trigger 2009-Aug-31 23:14:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Aug-31 23:14:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Aug-31 23:14:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Aug-31 23:14:15 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Aug-31 23:14:15 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Aug-31 23:14:15 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Aug-31 23:14:15 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Aug-31 23:14:15 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Aug-31 23:14:15 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Aug-31 23:14:15 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Aug-31 23:14:15 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Aug-31 23:14:15 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Aug-31 23:14:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Aug-31 23:14:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Aug-31 23:14:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Aug-31 23:14:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Aug-31 23:14:15 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Aug-31 23:14:15 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Aug-31 23:14:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Aug-31 23:14:15 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Aug-31 23:14:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Aug-31 23:14:15 LOG3 CALCONTROL-caltrig: Software trigger 2009-Aug-31 23:14:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Aug-31 23:14:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Aug-31 23:14:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Aug-31 23:14:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Aug-31 23:14:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Aug-31 23:14:15 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Aug-31 23:14:15 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Aug-31 23:14:15 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Aug-31 23:14:15 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Aug-31 23:14:15 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Aug-31 23:14:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Aug-31 23:14:15 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Aug-31 23:14:15 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Aug-31 23:14:15 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Aug-31 23:14:15 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Aug-31 23:14:15 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Aug-31 23:14:15 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Aug-31 23:14:15 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Aug-31 23:14:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Aug-31 23:14:15 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Aug-31 23:14:15 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Aug-31 23:14:15 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Aug-31 23:14:15 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Aug-31 23:14:15 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Aug-31 23:14:15 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Aug-31 23:14:15 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Aug-31 23:14:15 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Aug-31 23:14:16 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Aug-31 23:14:16 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Aug-31 23:14:16 NOTE CIMA-load_config_file: Configuration file 'a2010_az360_2009.conf' applied. 2009-Aug-31 23:14:27 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Aug-31 23:14:27 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Aug-31 23:14:27 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Aug-31 23:14:27 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Aug-31 23:14:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Aug-31 23:14:27 INFO2 adjust_power: Starting to adjust WAPP power 2009-Aug-31 23:14:27 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Aug-31 23:14:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Aug-31 23:14:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:14:27 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Aug-31 23:14:27 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Aug-31 23:14:27 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Aug-31 23:14:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:14:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:14:31 LOG4 got_cormsg: From DATATAKING: DONE 2009-Aug-31 23:14:31 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Aug-31 23:14:31 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Aug-31 23:14:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Aug-31 23:14:31 START begin_task: Starting task 'adjusting WAPP power' 2009-Aug-31 23:14:31 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Aug-31 23:14:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Aug-31 23:14:31 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Aug-31 23:14:31 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Aug-31 23:14:31 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Aug-31 23:14:31 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Aug-31 23:14:31 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Aug-31 23:14:31 LOG5 begin_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Aug-31 23:14:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Aug-31 23:14:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:14:31 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Aug-31 23:14:31 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 1 0 dB --- beam 5: 4 4 dB 2009-Aug-31 23:14:31 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 3 dB 2009-Aug-31 23:14:31 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 3 3 dB 2009-Aug-31 23:14:31 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Aug-31 23:14:31 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Aug-31 23:14:31 LOG5 end_task: Level: (3) ID = <10104> Status = 0 0 0 0 ok 2009-Aug-31 23:14:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.058 0.949 ALFA beam 1: 0.919 0.906 2009-Aug-31 23:14:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.069 0.983 ALFA beam 3: 0.950 0.929 2009-Aug-31 23:14:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.102 1.090 ALFA beam 5: 0.976 1.019 2009-Aug-31 23:14:31 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.992 0.915 ALFA beam 7: 0.882 0.895 2009-Aug-31 23:14:31 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Aug-31 23:14:31 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Aug-31 23:14:31 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Aug-31 23:14:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Aug-31 23:14:31 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Aug-31 23:14:31 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Aug-31 23:14:32 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Aug-31 23:14:32 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Aug-31 23:14:32 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Aug-31 23:14:32 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Aug-31 23:14:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Aug-31 23:14:32 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Aug-31 23:14:32 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Aug-31 23:14:39 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Aug-31 23:14:39 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift4p1 213000.0 +005106 J 0 Topocentric velocity(optical) 2009-Aug-31 23:14:39 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift4p1 213000.0 +005106 J 0 Topocentric velocity(optical)' 2009-Aug-31 23:14:39 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Aug-31 23:14:39 LOG5 begin_task: Level: (1) ID = <10105> Status = 0 0 0 0 ok 2009-Aug-31 23:14:39 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2009-Aug-31 23:14:39 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Aug-31 23:14:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift4p1} 2009-Aug-31 23:14:39 INFO5 fixed_driftmap: Start: year = 2009.6679493370852 RA = 21:30:31.8 Dec = +00:53:49.7 2009-Aug-31 23:14:39 NOTE fixed_driftmap: Setting ZA to 17:27:24.0 ... 2009-Aug-31 23:14:39 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 17.46 2009-Aug-31 23:14:39 LOG3 track_source: Calling 'track_source drift4p1 360.0 17.4566737651 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Aug-31 23:14:39 START begin_task: Starting task 'sending tracking commands' 2009-Aug-31 23:14:39 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Aug-31 23:14:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift4p1} INFO {Slewing to source 'drift4p1' ...} 2009-Aug-31 23:14:39 INFO1 track_source: Starting to track drift4p1 2009-Aug-31 23:14:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift4p1" 2009-Aug-31 23:14:39 LOG3 vw_send: To DATATAKING: set ra 360.0 2009-Aug-31 23:14:39 LOG3 vw_send: To DATATAKING: set dec 17.4566737651 2009-Aug-31 23:14:39 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Aug-31 23:14:39 LOG3 vw_send: To DATATAKING: pnt tr 360.0 17.4566737651 -CF 2009-Aug-31 23:14:39 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Aug-31 23:14:39 STOP finish_task: Finishing task 'sending tracking commands' 2009-Aug-31 23:14:39 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Aug-31 23:14:39 INFO2 finish_task: DONE finished sending: tracking commands 2009-Aug-31 23:14:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Aug-31 23:14:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Aug-31 23:14:39 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Aug-31 23:14:39 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Aug-31 23:14:39 LOG5 begin_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Aug-31 23:14:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Aug-31 23:14:39 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Aug-31 23:14:39 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Aug-31 23:14:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Aug-31 23:14:39 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Aug-31 23:14:39 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Aug-31 23:14:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift4p1" 2009-Aug-31 23:14:39 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2009-Aug-31 23:14:39 LOG4 got_cormsg: From DATATAKING: set dec 17.4566737651 2009-Aug-31 23:14:39 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2009-Aug-31 23:14:39 LOG4 got_cormsg: From DATATAKING: vw% 17.4566737651 2009-Aug-31 23:14:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:14:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Aug-31 23:14:39 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 17.4566737651 -CF 2009-Aug-31 23:14:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Aug-31 23:14:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Aug-31 23:14:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:14:40 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Aug-31 23:14:40 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Aug-31 23:14:40 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Aug-31 23:14:40 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2009-Aug-31 23:14:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Aug-31 23:14:40 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Aug-31 23:14:40 LOG5 finish_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Aug-31 23:14:40 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Aug-31 23:14:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Aug-31 23:14:40 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Aug-31 23:14:40 LOG5 end_task: Level: (2) ID = <10107> Status = 0 0 0 0 ok 2009-Aug-31 23:14:40 START begin_task: Starting task 'waiting on telescope' 2009-Aug-31 23:14:40 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Aug-31 23:14:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Aug-31 23:14:40 LOG3 waittrk: Start waittrk 5 2009-Aug-31 23:14:40 START begin_task: Starting task 'waiting on telescope movement' 2009-Aug-31 23:14:40 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Aug-31 23:14:45 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Aug-31 23:14:45 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Aug-31 23:14:45 START begin_task: Starting task 'waiting on telescope on source' 2009-Aug-31 23:14:45 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Aug-31 23:14:53 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Aug-31 23:14:53 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Aug-31 23:14:53 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Aug-31 23:14:53 INFO2 waittrk: Now tracking drift4p1 2009-Aug-31 23:14:53 LOG4 waittrk: Current telescope position: Az = 359.65 ZA = 17.44 2009-Aug-31 23:14:53 STOP finish_task: Finishing task 'waiting on telescope' 2009-Aug-31 23:14:53 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Aug-31 23:14:53 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Aug-31 23:14:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Aug-31 23:14:53 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Aug-31 23:14:53 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Aug-31 23:14:53 START begin_task: Starting task 'selecting calibration type' 2009-Aug-31 23:14:53 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Aug-31 23:14:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Aug-31 23:14:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Aug-31 23:14:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:14:53 START begin_task: Starting task 'waiting on setcal' 2009-Aug-31 23:14:53 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Aug-31 23:14:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Aug-31 23:14:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:14:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:14:53 LOG4 got_cormsg: From DATATAKING: DONE 2009-Aug-31 23:14:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Aug-31 23:14:53 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Aug-31 23:14:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Aug-31 23:14:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Aug-31 23:14:53 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Aug-31 23:14:53 START begin_task: Starting task 'waiting on command to ALFA' 2009-Aug-31 23:14:53 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Aug-31 23:14:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:14:53 LOG4 got_alfamon: From ALFAMON: ACK 2009-Aug-31 23:14:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Aug-31 23:14:53 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Aug-31 23:14:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Aug-31 23:14:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Aug-31 23:14:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Aug-31 23:14:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Aug-31 23:14:53 START begin_task: Starting task 'waiting on command to ALFA' 2009-Aug-31 23:14:53 LOG5 begin_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Aug-31 23:14:53 LOG4 got_alfamon: From ALFAMON: ACK 2009-Aug-31 23:14:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Aug-31 23:14:53 LOG5 end_task: Level: (3) ID = <10115> Status = 0 0 0 0 ok 2009-Aug-31 23:14:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Aug-31 23:14:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Aug-31 23:14:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Aug-31 23:14:53 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Aug-31 23:14:53 LOG5 dopset_later: Calling 'dopset_later 57.856176950877604' 2009-Aug-31 23:14:53 INFO3 dopset_later: Setting Doppler correction for 23:15:51 (57.9 seconds from now) 2009-Aug-31 23:14:53 LOG5 antvel: Calling 'antvel 360.000000 17.456674 F Topocentric 57.856176950877604' 2009-Aug-31 23:14:53 LOG2 antvel: Transforming current Az = 360.00 ZA = 17.46 to apparent RA = 21:30:31.6 Dec = +00:53:49.7 2009-Aug-31 23:14:53 LOG2 antvel: Parameters to Doppler: Topocentric 98151 2009 243 0.0 2009-Aug-31 23:14:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Aug-31 23:14:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Aug-31 23:14:53 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Aug-31 23:14:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Aug-31 23:14:53 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Aug-31 23:14:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Aug-31 23:14:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:14:53 START begin_task: Starting task 'adjusting WAPP power' 2009-Aug-31 23:14:53 LOG5 begin_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Aug-31 23:14:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Aug-31 23:14:53 INFO2 adjust_power: Starting to adjust WAPP power 2009-Aug-31 23:14:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Aug-31 23:14:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Aug-31 23:14:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:14:53 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Aug-31 23:14:53 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Aug-31 23:14:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Aug-31 23:14:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Aug-31 23:14:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Aug-31 23:14:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:14:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:14:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:14:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:14:56 LOG4 got_cormsg: From DATATAKING: DONE 2009-Aug-31 23:14:56 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Aug-31 23:14:56 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Aug-31 23:14:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Aug-31 23:14:56 START begin_task: Starting task 'adjusting WAPP power' 2009-Aug-31 23:14:56 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Aug-31 23:14:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Aug-31 23:14:56 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Aug-31 23:14:56 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Aug-31 23:14:56 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Aug-31 23:14:56 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Aug-31 23:14:56 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Aug-31 23:14:56 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2009-Aug-31 23:14:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:14:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Aug-31 23:14:57 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Aug-31 23:14:57 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 4 dB 2009-Aug-31 23:14:57 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 3 dB 2009-Aug-31 23:14:57 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 3 3 dB 2009-Aug-31 23:14:57 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Aug-31 23:14:57 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Aug-31 23:14:57 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2009-Aug-31 23:14:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.054 0.944 ALFA beam 1: 0.916 0.906 2009-Aug-31 23:14:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.069 1.004 ALFA beam 3: 0.958 0.945 2009-Aug-31 23:14:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.878 1.113 ALFA beam 5: 0.973 1.019 2009-Aug-31 23:14:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.013 0.939 ALFA beam 7: 0.892 0.914 2009-Aug-31 23:14:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Aug-31 23:14:57 LOG5 finish_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Aug-31 23:14:57 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Aug-31 23:14:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Aug-31 23:14:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Aug-31 23:14:57 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Aug-31 23:14:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Aug-31 23:14:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Aug-31 23:14:57 LOG5 finish_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Aug-31 23:14:57 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Aug-31 23:14:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Aug-31 23:14:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Aug-31 23:14:57 LOG5 end_task: Level: (2) ID = <10116> Status = 0 0 0 0 ok 2009-Aug-31 23:14:57 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 21:30:31.8 LST = 21:29:37.8 diff = 54.0 secs 2009-Aug-31 23:14:57 INFO2 fixed_driftmap: Waiting 52 seconds for RA 21:30:32 2009-Aug-31 23:14:57 INFO2 lstwait: Waiting for 51.9 secs from LST 21:29:38 to LST 21:30:30 ... 2009-Aug-31 23:14:57 LOG4 send_obs_status: To obs_status: <1> TASKTIME 51.862187747039471 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Aug-31 23:14:57 START begin_task: Starting task 'waiting on wait on LST' 2009-Aug-31 23:14:57 LOG5 begin_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2009-Aug-31 23:15:49 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Aug-31 23:15:49 LOG5 end_task: Level: (2) ID = <10120> Status = 0 0 0 0 ok 2009-Aug-31 23:15:49 LOG4 lstwait: Finished waiting 0.14 seconds late 2009-Aug-31 23:15:49 INFO3 lstwait: Finished waiting 2009-Aug-31 23:15:49 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Aug-31 23:15:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Aug-31 23:15:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Aug-31 23:15:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Aug-31 23:15:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Aug-31 23:15:49 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Aug-31 23:15:49 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Aug-31 23:15:49 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Aug-31 23:15:49 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Aug-31 23:15:49 START begin_task: Starting task 'WAPP spectral observation' 2009-Aug-31 23:15:49 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Aug-31 23:15:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Aug-31 23:15:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Aug-31 23:15:49 INFO2 take_data: Starting WAPP 600-second scan: 924300223 2009-Aug-31 23:15:50 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Aug-31 23:15:50 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-Aug-31 23:15:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Aug-31 23:15:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:15:50 NOTE WAPPDATA-new_file: New FITS file: wapp.20090831.a2010.0034.fits 2009-Aug-31 23:15:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11751.00 2009-Aug-31 23:15:50 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090831.a2010.0034.fits} 2009-Aug-31 23:15:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Aug-31 23:15:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:15:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:15:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:15:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:15:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:15:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:15:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:15:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:15:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:25:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:25:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Aug-31 23:25:51 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2009-Aug-31 23:25:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Aug-31 23:25:51 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2009-Aug-31 23:25:51 LOG1 fixed_driftmap: New position: year = 2009.6679706631685 RA = 21:40:02.7 RA/Dec = 21:40:34.5 +00:53:55.0 2009-Aug-31 23:25:51 NOTE fixed_driftmap: Correcting ZA to 17:27:18.7 ... 2009-Aug-31 23:25:51 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4551917086 -CF 2009-Aug-31 23:25:51 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Aug-31 23:25:51 START begin_task: Starting task 'WAPP calibration' 2009-Aug-31 23:25:51 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Aug-31 23:25:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Aug-31 23:25:51 START begin_task: Starting task 'selecting calibration type' 2009-Aug-31 23:25:51 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Aug-31 23:25:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Aug-31 23:25:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Aug-31 23:25:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:25:51 START begin_task: Starting task 'waiting on setcal' 2009-Aug-31 23:25:51 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Aug-31 23:25:51 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4551917086 -CF 2009-Aug-31 23:25:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:25:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Aug-31 23:25:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:25:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:25:51 LOG4 got_cormsg: From DATATAKING: DONE 2009-Aug-31 23:25:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Aug-31 23:25:51 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Aug-31 23:25:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Aug-31 23:25:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Aug-31 23:25:51 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Aug-31 23:25:51 START begin_task: Starting task 'waiting on command to ALFA' 2009-Aug-31 23:25:51 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Aug-31 23:25:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:25:52 LOG4 got_alfamon: From ALFAMON: ACK 2009-Aug-31 23:25:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Aug-31 23:25:52 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2009-Aug-31 23:25:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Aug-31 23:25:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Aug-31 23:25:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Aug-31 23:25:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Aug-31 23:25:52 START begin_task: Starting task 'waiting on command to ALFA' 2009-Aug-31 23:25:52 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Aug-31 23:25:52 LOG4 got_alfamon: From ALFAMON: ACK 2009-Aug-31 23:25:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Aug-31 23:25:52 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Aug-31 23:25:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Aug-31 23:25:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Aug-31 23:25:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Aug-31 23:25:52 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Aug-31 23:25:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Aug-31 23:25:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Aug-31 23:25:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Aug-31 23:25:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Aug-31 23:25:52 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Aug-31 23:25:52 LOG3 CALCONTROL-caltrig: Software trigger 2009-Aug-31 23:25:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Aug-31 23:25:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Aug-31 23:25:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Aug-31 23:25:52 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2009-Aug-31 23:25:52 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Aug-31 23:25:52 START begin_task: Starting task 'WAPP spectral observation' 2009-Aug-31 23:25:52 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Aug-31 23:25:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Aug-31 23:25:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Aug-31 23:25:52 INFO2 take_data: Starting WAPP 1-second scan: 924300224 2009-Aug-31 23:25:52 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Aug-31 23:25:52 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2009-Aug-31 23:25:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:25:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Aug-31 23:25:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12353.00 2009-Aug-31 23:25:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:25:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:25:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:25:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:25:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:25:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:25:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:25:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:25:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:25:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:25:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Aug-31 23:25:54 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2009-Aug-31 23:25:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Aug-31 23:25:54 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2009-Aug-31 23:25:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Aug-31 23:25:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Aug-31 23:25:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Aug-31 23:25:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Aug-31 23:25:54 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Aug-31 23:25:54 LOG3 CALCONTROL-caltrig: Software trigger 2009-Aug-31 23:25:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Aug-31 23:25:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Aug-31 23:25:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Aug-31 23:25:54 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Aug-31 23:25:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Aug-31 23:25:54 STOP finish_task: Finishing task 'WAPP calibration' 2009-Aug-31 23:25:54 LOG5 finish_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Aug-31 23:25:54 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Aug-31 23:25:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Aug-31 23:25:54 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Aug-31 23:25:54 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Aug-31 23:25:54 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Aug-31 23:25:54 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Aug-31 23:25:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Aug-31 23:25:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Aug-31 23:25:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Aug-31 23:25:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Aug-31 23:25:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Aug-31 23:25:55 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Aug-31 23:25:55 START begin_task: Starting task 'WAPP spectral observation' 2009-Aug-31 23:25:55 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2009-Aug-31 23:25:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Aug-31 23:25:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Aug-31 23:25:55 INFO2 take_data: Starting WAPP 600-second scan: 924300225 2009-Aug-31 23:25:55 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Aug-31 23:25:55 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Aug-31 23:25:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Aug-31 23:25:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:25:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Aug-31 23:25:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12356.00 2009-Aug-31 23:25:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20090831.a2010.0035.fits 2009-Aug-31 23:25:55 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090831.a2010.0035.fits} 2009-Aug-31 23:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:25:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:35:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:35:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Aug-31 23:35:56 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Aug-31 23:35:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Aug-31 23:35:56 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2009-Aug-31 23:35:56 LOG1 fixed_driftmap: New position: year = 2009.6679898344614 RA = 21:50:09.4 RA/Dec = 21:50:41.2 +00:54:00.1 2009-Aug-31 23:35:56 NOTE fixed_driftmap: Correcting ZA to 17:27:13.6 ... 2009-Aug-31 23:35:56 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4537870388 -CF 2009-Aug-31 23:35:56 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Aug-31 23:35:56 START begin_task: Starting task 'WAPP calibration' 2009-Aug-31 23:35:56 LOG5 begin_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2009-Aug-31 23:35:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Aug-31 23:35:56 START begin_task: Starting task 'selecting calibration type' 2009-Aug-31 23:35:56 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2009-Aug-31 23:35:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Aug-31 23:35:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Aug-31 23:35:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:35:56 START begin_task: Starting task 'waiting on setcal' 2009-Aug-31 23:35:56 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2009-Aug-31 23:35:56 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4537870388 -CF 2009-Aug-31 23:35:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:35:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Aug-31 23:35:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:35:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:35:56 LOG4 got_cormsg: From DATATAKING: DONE 2009-Aug-31 23:35:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Aug-31 23:35:56 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2009-Aug-31 23:35:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Aug-31 23:35:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Aug-31 23:35:56 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Aug-31 23:35:56 START begin_task: Starting task 'waiting on command to ALFA' 2009-Aug-31 23:35:56 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-Aug-31 23:35:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:35:57 LOG4 got_alfamon: From ALFAMON: ACK 2009-Aug-31 23:35:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Aug-31 23:35:57 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2009-Aug-31 23:35:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Aug-31 23:35:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Aug-31 23:35:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Aug-31 23:35:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Aug-31 23:35:57 START begin_task: Starting task 'waiting on command to ALFA' 2009-Aug-31 23:35:57 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2009-Aug-31 23:35:57 LOG4 got_alfamon: From ALFAMON: ACK 2009-Aug-31 23:35:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Aug-31 23:35:57 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2009-Aug-31 23:35:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Aug-31 23:35:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Aug-31 23:35:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Aug-31 23:35:57 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2009-Aug-31 23:35:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Aug-31 23:35:57 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Aug-31 23:35:57 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Aug-31 23:35:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Aug-31 23:35:57 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-Aug-31 23:35:57 LOG3 CALCONTROL-caltrig: Software trigger 2009-Aug-31 23:35:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Aug-31 23:35:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Aug-31 23:35:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Aug-31 23:35:57 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2009-Aug-31 23:35:57 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Aug-31 23:35:57 START begin_task: Starting task 'WAPP spectral observation' 2009-Aug-31 23:35:57 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2009-Aug-31 23:35:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Aug-31 23:35:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Aug-31 23:35:57 INFO2 take_data: Starting WAPP 1-second scan: 924300226 2009-Aug-31 23:35:57 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Aug-31 23:35:57 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Aug-31 23:35:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:35:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Aug-31 23:35:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12958.00 2009-Aug-31 23:35:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:35:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:35:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:35:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:35:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:35:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:35:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:35:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:35:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:35:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:35:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Aug-31 23:35:59 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Aug-31 23:35:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Aug-31 23:35:59 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2009-Aug-31 23:35:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Aug-31 23:35:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Aug-31 23:35:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Aug-31 23:35:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Aug-31 23:35:59 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Aug-31 23:35:59 LOG3 CALCONTROL-caltrig: Software trigger 2009-Aug-31 23:35:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Aug-31 23:35:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Aug-31 23:35:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Aug-31 23:35:59 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Aug-31 23:35:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Aug-31 23:35:59 STOP finish_task: Finishing task 'WAPP calibration' 2009-Aug-31 23:35:59 LOG5 finish_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2009-Aug-31 23:35:59 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Aug-31 23:35:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Aug-31 23:35:59 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Aug-31 23:35:59 LOG5 end_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2009-Aug-31 23:35:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2009-Aug-31 23:35:59 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2009-Aug-31 23:35:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Aug-31 23:35:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Aug-31 23:35:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Aug-31 23:36:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Aug-31 23:36:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Aug-31 23:36:00 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Aug-31 23:36:00 START begin_task: Starting task 'WAPP spectral observation' 2009-Aug-31 23:36:00 LOG5 begin_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2009-Aug-31 23:36:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Aug-31 23:36:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Aug-31 23:36:00 INFO2 take_data: Starting WAPP 600-second scan: 924300227 2009-Aug-31 23:36:00 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Aug-31 23:36:00 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2009-Aug-31 23:36:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Aug-31 23:36:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:36:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Aug-31 23:36:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12961.00 2009-Aug-31 23:36:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20090831.a2010.0036.fits 2009-Aug-31 23:36:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090831.a2010.0036.fits} 2009-Aug-31 23:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:46:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:46:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Aug-31 23:46:01 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2009-Aug-31 23:46:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Aug-31 23:46:01 LOG5 end_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2009-Aug-31 23:46:01 LOG1 fixed_driftmap: New position: year = 2009.6680090057546 RA = 22:00:16.0 RA/Dec = 22:00:47.9 +00:54:04.8 2009-Aug-31 23:46:01 NOTE fixed_driftmap: Correcting ZA to 17:27:08.9 ... 2009-Aug-31 23:46:01 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4524723387 -CF 2009-Aug-31 23:46:01 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Aug-31 23:46:01 START begin_task: Starting task 'WAPP calibration' 2009-Aug-31 23:46:01 LOG5 begin_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2009-Aug-31 23:46:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Aug-31 23:46:01 START begin_task: Starting task 'selecting calibration type' 2009-Aug-31 23:46:01 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Aug-31 23:46:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Aug-31 23:46:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Aug-31 23:46:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:46:01 START begin_task: Starting task 'waiting on setcal' 2009-Aug-31 23:46:01 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-Aug-31 23:46:01 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4524723387 -CF 2009-Aug-31 23:46:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:46:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Aug-31 23:46:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:46:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:46:02 LOG4 got_cormsg: From DATATAKING: DONE 2009-Aug-31 23:46:02 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Aug-31 23:46:02 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2009-Aug-31 23:46:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Aug-31 23:46:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Aug-31 23:46:02 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Aug-31 23:46:02 START begin_task: Starting task 'waiting on command to ALFA' 2009-Aug-31 23:46:02 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2009-Aug-31 23:46:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:46:02 LOG4 got_alfamon: From ALFAMON: ACK 2009-Aug-31 23:46:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Aug-31 23:46:02 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2009-Aug-31 23:46:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Aug-31 23:46:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Aug-31 23:46:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Aug-31 23:46:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Aug-31 23:46:02 START begin_task: Starting task 'waiting on command to ALFA' 2009-Aug-31 23:46:02 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2009-Aug-31 23:46:02 LOG4 got_alfamon: From ALFAMON: ACK 2009-Aug-31 23:46:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Aug-31 23:46:02 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2009-Aug-31 23:46:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Aug-31 23:46:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Aug-31 23:46:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Aug-31 23:46:02 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Aug-31 23:46:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Aug-31 23:46:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Aug-31 23:46:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Aug-31 23:46:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Aug-31 23:46:02 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-Aug-31 23:46:02 LOG3 CALCONTROL-caltrig: Software trigger 2009-Aug-31 23:46:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Aug-31 23:46:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Aug-31 23:46:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Aug-31 23:46:02 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-Aug-31 23:46:02 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Aug-31 23:46:02 START begin_task: Starting task 'WAPP spectral observation' 2009-Aug-31 23:46:02 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-Aug-31 23:46:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Aug-31 23:46:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Aug-31 23:46:02 INFO2 take_data: Starting WAPP 1-second scan: 924300228 2009-Aug-31 23:46:03 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Aug-31 23:46:03 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Aug-31 23:46:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:46:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Aug-31 23:46:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13564.00 2009-Aug-31 23:46:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:46:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:46:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:46:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:46:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:46:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:46:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:46:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:46:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:46:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:46:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Aug-31 23:46:05 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Aug-31 23:46:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Aug-31 23:46:05 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-Aug-31 23:46:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Aug-31 23:46:05 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Aug-31 23:46:05 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Aug-31 23:46:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Aug-31 23:46:05 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Aug-31 23:46:05 LOG3 CALCONTROL-caltrig: Software trigger 2009-Aug-31 23:46:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Aug-31 23:46:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Aug-31 23:46:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Aug-31 23:46:05 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Aug-31 23:46:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Aug-31 23:46:05 STOP finish_task: Finishing task 'WAPP calibration' 2009-Aug-31 23:46:05 LOG5 finish_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2009-Aug-31 23:46:05 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Aug-31 23:46:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Aug-31 23:46:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Aug-31 23:46:06 LOG5 end_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2009-Aug-31 23:46:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2009-Aug-31 23:46:06 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2009-Aug-31 23:46:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Aug-31 23:46:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Aug-31 23:46:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Aug-31 23:46:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Aug-31 23:46:06 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Aug-31 23:46:06 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Aug-31 23:46:06 START begin_task: Starting task 'WAPP spectral observation' 2009-Aug-31 23:46:06 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2009-Aug-31 23:46:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Aug-31 23:46:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Aug-31 23:46:06 INFO2 take_data: Starting WAPP 600-second scan: 924300229 2009-Aug-31 23:46:06 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Aug-31 23:46:06 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-Aug-31 23:46:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Aug-31 23:46:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:46:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Aug-31 23:46:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13567.00 2009-Aug-31 23:46:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20090831.a2010.0037.fits 2009-Aug-31 23:46:06 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090831.a2010.0037.fits} 2009-Aug-31 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:46:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:50:31 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 23:50:31.298 (seconds: 85831.298)!} 2009-Aug-31 23:50:31 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 23:50:31.298 (seconds: 85831.298)! 2009-Aug-31 23:50:32 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 85830.0 to 85831.0! 2009-Aug-31 23:50:33 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (85830.0 - 85832.0)! 2009-Aug-31 23:56:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:56:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Aug-31 23:56:07 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-Aug-31 23:56:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Aug-31 23:56:07 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2009-Aug-31 23:56:07 LOG1 fixed_driftmap: New position: year = 2009.6680282087359 RA = 22:10:23.7 RA/Dec = 22:10:55.5 +00:54:09.2 2009-Aug-31 23:56:07 NOTE fixed_driftmap: Correcting ZA to 17:27:04.5 ... 2009-Aug-31 23:56:07 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4512482444 -CF 2009-Aug-31 23:56:07 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Aug-31 23:56:07 START begin_task: Starting task 'WAPP calibration' 2009-Aug-31 23:56:07 LOG5 begin_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2009-Aug-31 23:56:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Aug-31 23:56:07 START begin_task: Starting task 'selecting calibration type' 2009-Aug-31 23:56:07 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2009-Aug-31 23:56:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Aug-31 23:56:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Aug-31 23:56:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:56:07 START begin_task: Starting task 'waiting on setcal' 2009-Aug-31 23:56:07 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2009-Aug-31 23:56:07 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4512482444 -CF 2009-Aug-31 23:56:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:56:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Aug-31 23:56:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Aug-31 23:56:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:56:07 LOG4 got_cormsg: From DATATAKING: DONE 2009-Aug-31 23:56:07 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Aug-31 23:56:07 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2009-Aug-31 23:56:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Aug-31 23:56:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Aug-31 23:56:07 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Aug-31 23:56:07 START begin_task: Starting task 'waiting on command to ALFA' 2009-Aug-31 23:56:07 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2009-Aug-31 23:56:07 LOG4 got_cormsg: From DATATAKING: vw% 2009-Aug-31 23:56:08 LOG4 got_alfamon: From ALFAMON: ACK 2009-Aug-31 23:56:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Aug-31 23:56:08 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2009-Aug-31 23:56:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Aug-31 23:56:08 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Aug-31 23:56:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Aug-31 23:56:08 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Aug-31 23:56:08 START begin_task: Starting task 'waiting on command to ALFA' 2009-Aug-31 23:56:08 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-Aug-31 23:56:08 LOG4 got_alfamon: From ALFAMON: ACK 2009-Aug-31 23:56:08 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Aug-31 23:56:08 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-Aug-31 23:56:08 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Aug-31 23:56:08 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Aug-31 23:56:08 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Aug-31 23:56:08 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2009-Aug-31 23:56:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Aug-31 23:56:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Aug-31 23:56:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Aug-31 23:56:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Aug-31 23:56:08 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Aug-31 23:56:08 LOG3 CALCONTROL-caltrig: Software trigger 2009-Aug-31 23:56:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Aug-31 23:56:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Aug-31 23:56:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Aug-31 23:56:08 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Aug-31 23:56:08 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Aug-31 23:56:08 START begin_task: Starting task 'WAPP spectral observation' 2009-Aug-31 23:56:08 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2009-Aug-31 23:56:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Aug-31 23:56:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Aug-31 23:56:08 INFO2 take_data: Starting WAPP 1-second scan: 924300230 2009-Aug-31 23:56:08 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Aug-31 23:56:08 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-Aug-31 23:56:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:56:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Aug-31 23:56:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14169.00 2009-Aug-31 23:56:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:56:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:56:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:56:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:56:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:56:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:56:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:56:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:56:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Aug-31 23:56:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Aug-31 23:56:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Aug-31 23:56:10 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-Aug-31 23:56:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Aug-31 23:56:10 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2009-Aug-31 23:56:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Aug-31 23:56:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Aug-31 23:56:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Aug-31 23:56:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Aug-31 23:56:10 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Aug-31 23:56:10 LOG3 CALCONTROL-caltrig: Software trigger 2009-Aug-31 23:56:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Aug-31 23:56:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Aug-31 23:56:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Aug-31 23:56:10 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Aug-31 23:56:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Aug-31 23:56:10 STOP finish_task: Finishing task 'WAPP calibration' 2009-Aug-31 23:56:10 LOG5 finish_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2009-Aug-31 23:56:10 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Aug-31 23:56:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Aug-31 23:56:10 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Aug-31 23:56:10 LOG5 end_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2009-Aug-31 23:56:10 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2009-Aug-31 23:56:10 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2009-Aug-31 23:56:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Aug-31 23:56:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Aug-31 23:56:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Aug-31 23:56:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Aug-31 23:56:11 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Aug-31 23:56:11 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Aug-31 23:56:11 START begin_task: Starting task 'WAPP spectral observation' 2009-Aug-31 23:56:11 LOG5 begin_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2009-Aug-31 23:56:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Aug-31 23:56:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Aug-31 23:56:11 INFO2 take_data: Starting WAPP 600-second scan: 924300231 2009-Aug-31 23:56:11 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Aug-31 23:56:11 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-Aug-31 23:56:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Aug-31 23:56:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Aug-31 23:56:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Aug-31 23:56:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14172.00 2009-Aug-31 23:56:11 NOTE WAPPDATA-new_file: New FITS file: wapp.20090831.a2010.0038.fits 2009-Aug-31 23:56:11 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090831.a2010.0038.fits} 2009-Aug-31 23:56:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Aug-31 23:56:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:56:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Aug-31 23:56:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Aug-31 23:56:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Aug-31 23:56:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Aug-31 23:56:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Aug-31 23:56:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Aug-31 23:56:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 00:06:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 00:06:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 00:06:12 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-Sep-01 00:06:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 00:06:12 LOG5 end_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2009-Sep-01 00:06:12 LOG1 fixed_driftmap: New position: year = 2009.6680473800288 RA = 22:20:30.3 RA/Dec = 22:21:02.2 +00:54:13.3 2009-Sep-01 00:06:12 NOTE fixed_driftmap: Correcting ZA to 17:27:00.4 ... 2009-Sep-01 00:06:12 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4501211621 -CF 2009-Sep-01 00:06:12 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 00:06:12 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 00:06:12 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2009-Sep-01 00:06:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 00:06:12 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 00:06:12 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2009-Sep-01 00:06:12 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 00:06:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 00:06:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 00:06:12 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 00:06:12 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Sep-01 00:06:12 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4501211621 -CF 2009-Sep-01 00:06:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:06:12 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 00:06:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 00:06:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:06:12 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 00:06:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 00:06:12 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2009-Sep-01 00:06:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 00:06:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 00:06:13 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 00:06:13 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 00:06:13 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2009-Sep-01 00:06:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:06:13 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 00:06:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 00:06:13 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2009-Sep-01 00:06:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 00:06:13 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 00:06:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 00:06:13 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 00:06:13 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 00:06:13 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2009-Sep-01 00:06:13 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 00:06:13 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 00:06:13 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2009-Sep-01 00:06:13 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 00:06:13 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 00:06:13 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 00:06:13 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2009-Sep-01 00:06:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 00:06:13 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 00:06:13 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 00:06:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 00:06:13 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2009-Sep-01 00:06:13 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 00:06:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 00:06:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 00:06:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 00:06:13 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2009-Sep-01 00:06:13 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 00:06:13 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 00:06:13 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2009-Sep-01 00:06:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 00:06:13 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 00:06:13 INFO2 take_data: Starting WAPP 1-second scan: 924400001 2009-Sep-01 00:06:13 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 00:06:13 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2009-Sep-01 00:06:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 00:06:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 00:06:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14774.00 2009-Sep-01 00:06:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 00:06:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:06:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:06:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 00:06:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 00:06:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 00:06:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 00:06:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 00:06:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 00:06:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 00:06:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 00:06:15 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2009-Sep-01 00:06:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 00:06:15 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2009-Sep-01 00:06:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 00:06:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 00:06:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 00:06:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 00:06:15 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2009-Sep-01 00:06:15 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 00:06:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 00:06:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 00:06:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 00:06:15 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2009-Sep-01 00:06:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 00:06:15 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 00:06:15 LOG5 finish_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2009-Sep-01 00:06:15 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 00:06:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 00:06:15 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 00:06:15 LOG5 end_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2009-Sep-01 00:06:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2009-Sep-01 00:06:15 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2009-Sep-01 00:06:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 00:06:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 00:06:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 00:06:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 00:06:16 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 00:06:16 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 00:06:16 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 00:06:16 LOG5 begin_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2009-Sep-01 00:06:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 00:06:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 00:06:16 INFO2 take_data: Starting WAPP 600-second scan: 924400002 2009-Sep-01 00:06:16 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 00:06:16 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2009-Sep-01 00:06:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 00:06:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 00:06:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 00:06:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14777.00 2009-Sep-01 00:06:16 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0000.fits 2009-Sep-01 00:06:16 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0000.fits} 2009-Sep-01 00:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 00:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 00:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 00:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 00:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 00:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 00:06:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 00:16:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 00:16:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 00:16:17 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2009-Sep-01 00:16:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 00:16:17 LOG5 end_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2009-Sep-01 00:16:17 LOG1 fixed_driftmap: New position: year = 2009.668066551322 RA = 22:30:36.9 RA/Dec = 22:31:08.8 +00:54:17.0 2009-Sep-01 00:16:17 NOTE fixed_driftmap: Correcting ZA to 17:26:56.7 ... 2009-Sep-01 00:16:17 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4490911986 -CF 2009-Sep-01 00:16:17 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 00:16:17 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 00:16:17 LOG5 begin_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2009-Sep-01 00:16:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 00:16:17 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 00:16:17 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2009-Sep-01 00:16:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 00:16:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 00:16:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 00:16:17 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 00:16:17 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2009-Sep-01 00:16:17 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4490911986 -CF 2009-Sep-01 00:16:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:16:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 00:16:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 00:16:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:16:17 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 00:16:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 00:16:17 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2009-Sep-01 00:16:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 00:16:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 00:16:17 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 00:16:17 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 00:16:17 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2009-Sep-01 00:16:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:16:18 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 00:16:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 00:16:18 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2009-Sep-01 00:16:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 00:16:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 00:16:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 00:16:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 00:16:18 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 00:16:18 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2009-Sep-01 00:16:18 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 00:16:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 00:16:18 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2009-Sep-01 00:16:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 00:16:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 00:16:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 00:16:18 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2009-Sep-01 00:16:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 00:16:18 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 00:16:18 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 00:16:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 00:16:18 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2009-Sep-01 00:16:18 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 00:16:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 00:16:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 00:16:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 00:16:18 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2009-Sep-01 00:16:18 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 00:16:18 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 00:16:18 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2009-Sep-01 00:16:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 00:16:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 00:16:18 INFO2 take_data: Starting WAPP 1-second scan: 924400003 2009-Sep-01 00:16:18 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 00:16:18 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2009-Sep-01 00:16:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 00:16:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 00:16:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15379.00 2009-Sep-01 00:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 00:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 00:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 00:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 00:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 00:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 00:16:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 00:16:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 00:16:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 00:16:20 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2009-Sep-01 00:16:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 00:16:20 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2009-Sep-01 00:16:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 00:16:20 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 00:16:20 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 00:16:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 00:16:20 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2009-Sep-01 00:16:20 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 00:16:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 00:16:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 00:16:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 00:16:20 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2009-Sep-01 00:16:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 00:16:20 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 00:16:20 LOG5 finish_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2009-Sep-01 00:16:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 00:16:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 00:16:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 00:16:20 LOG5 end_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2009-Sep-01 00:16:20 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2009-Sep-01 00:16:20 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2009-Sep-01 00:16:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 00:16:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 00:16:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 00:16:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 00:16:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 00:16:21 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 00:16:21 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 00:16:21 LOG5 begin_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2009-Sep-01 00:16:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 00:16:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 00:16:21 INFO2 take_data: Starting WAPP 600-second scan: 924400004 2009-Sep-01 00:16:21 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 00:16:21 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2009-Sep-01 00:16:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 00:16:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 00:16:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 00:16:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15382.00 2009-Sep-01 00:16:21 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0001.fits 2009-Sep-01 00:16:21 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0001.fits} 2009-Sep-01 00:16:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 00:16:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:16:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:16:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 00:16:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 00:16:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 00:16:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 00:16:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 00:16:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 00:20:29 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 00:20:29.299 (seconds: 1229.299)!} 2009-Sep-01 00:20:29 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 00:20:29.299 (seconds: 1229.299)! 2009-Sep-01 00:20:30 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 1228.0 to 1229.0! 2009-Sep-01 00:20:31 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (1228.0 - 1230.0)! 2009-Sep-01 00:26:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 00:26:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 00:26:22 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2009-Sep-01 00:26:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 00:26:22 LOG5 end_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2009-Sep-01 00:26:22 LOG1 fixed_driftmap: New position: year = 2009.6680857226152 RA = 22:40:43.6 RA/Dec = 22:41:15.5 +00:54:20.3 2009-Sep-01 00:26:22 NOTE fixed_driftmap: Correcting ZA to 17:26:53.4 ... 2009-Sep-01 00:26:22 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4481603518 -CF 2009-Sep-01 00:26:22 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 00:26:22 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 00:26:22 LOG5 begin_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2009-Sep-01 00:26:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 00:26:22 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 00:26:22 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2009-Sep-01 00:26:22 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 00:26:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 00:26:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 00:26:22 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 00:26:22 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2009-Sep-01 00:26:22 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4481603518 -CF 2009-Sep-01 00:26:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:26:22 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 00:26:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 00:26:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:26:22 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 00:26:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 00:26:22 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2009-Sep-01 00:26:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 00:26:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 00:26:22 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 00:26:22 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 00:26:22 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2009-Sep-01 00:26:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:26:23 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 00:26:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 00:26:23 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2009-Sep-01 00:26:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 00:26:23 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 00:26:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 00:26:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 00:26:23 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 00:26:23 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2009-Sep-01 00:26:23 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 00:26:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 00:26:23 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2009-Sep-01 00:26:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 00:26:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 00:26:23 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 00:26:23 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2009-Sep-01 00:26:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 00:26:23 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 00:26:23 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 00:26:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 00:26:23 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2009-Sep-01 00:26:23 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 00:26:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 00:26:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 00:26:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 00:26:23 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2009-Sep-01 00:26:23 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 00:26:23 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 00:26:23 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2009-Sep-01 00:26:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 00:26:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 00:26:23 INFO2 take_data: Starting WAPP 1-second scan: 924400005 2009-Sep-01 00:26:23 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 00:26:23 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2009-Sep-01 00:26:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 00:26:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 00:26:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15984.00 2009-Sep-01 00:26:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 00:26:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:26:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:26:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 00:26:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 00:26:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 00:26:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 00:26:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 00:26:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 00:26:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 00:26:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 00:26:25 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2009-Sep-01 00:26:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 00:26:25 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2009-Sep-01 00:26:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 00:26:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 00:26:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 00:26:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 00:26:25 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2009-Sep-01 00:26:25 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 00:26:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 00:26:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 00:26:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 00:26:25 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2009-Sep-01 00:26:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 00:26:25 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 00:26:25 LOG5 finish_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2009-Sep-01 00:26:25 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 00:26:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 00:26:25 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 00:26:25 LOG5 end_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2009-Sep-01 00:26:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2009-Sep-01 00:26:25 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2009-Sep-01 00:26:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 00:26:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 00:26:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 00:26:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 00:26:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 00:26:26 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 00:26:26 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 00:26:26 LOG5 begin_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2009-Sep-01 00:26:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 00:26:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 00:26:26 INFO2 take_data: Starting WAPP 600-second scan: 924400006 2009-Sep-01 00:26:26 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 00:26:26 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2009-Sep-01 00:26:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 00:26:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 00:26:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 00:26:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15987.00 2009-Sep-01 00:26:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0002.fits 2009-Sep-01 00:26:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0002.fits} 2009-Sep-01 00:26:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 00:26:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:26:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:26:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 00:26:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 00:26:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 00:26:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 00:26:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 00:26:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 00:36:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 00:36:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 00:36:27 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2009-Sep-01 00:36:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 00:36:27 LOG5 end_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2009-Sep-01 00:36:27 LOG1 fixed_driftmap: New position: year = 2009.6681048939083 RA = 22:50:50.3 RA/Dec = 22:51:22.1 +00:54:23.3 2009-Sep-01 00:36:27 NOTE fixed_driftmap: Correcting ZA to 17:26:50.4 ... 2009-Sep-01 00:36:27 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4473304337 -CF 2009-Sep-01 00:36:27 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 00:36:27 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 00:36:27 LOG5 begin_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2009-Sep-01 00:36:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 00:36:27 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 00:36:27 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2009-Sep-01 00:36:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 00:36:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 00:36:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 00:36:27 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 00:36:27 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2009-Sep-01 00:36:27 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4473304337 -CF 2009-Sep-01 00:36:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:36:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 00:36:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 00:36:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:36:27 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 00:36:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 00:36:27 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2009-Sep-01 00:36:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 00:36:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 00:36:27 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 00:36:27 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 00:36:27 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2009-Sep-01 00:36:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:36:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 00:36:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 00:36:28 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2009-Sep-01 00:36:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 00:36:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 00:36:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 00:36:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 00:36:28 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 00:36:28 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2009-Sep-01 00:36:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 00:36:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 00:36:28 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2009-Sep-01 00:36:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 00:36:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 00:36:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 00:36:28 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2009-Sep-01 00:36:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 00:36:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 00:36:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 00:36:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 00:36:28 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2009-Sep-01 00:36:28 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 00:36:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 00:36:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 00:36:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 00:36:28 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2009-Sep-01 00:36:28 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 00:36:28 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 00:36:28 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2009-Sep-01 00:36:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 00:36:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 00:36:28 INFO2 take_data: Starting WAPP 1-second scan: 924400007 2009-Sep-01 00:36:28 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 00:36:28 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2009-Sep-01 00:36:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 00:36:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 00:36:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16589.00 2009-Sep-01 00:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 00:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 00:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 00:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 00:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 00:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 00:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 00:36:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 00:36:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 00:36:30 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2009-Sep-01 00:36:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 00:36:30 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2009-Sep-01 00:36:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 00:36:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 00:36:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 00:36:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 00:36:30 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2009-Sep-01 00:36:30 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 00:36:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 00:36:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 00:36:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 00:36:30 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2009-Sep-01 00:36:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 00:36:30 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 00:36:30 LOG5 finish_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2009-Sep-01 00:36:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 00:36:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 00:36:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 00:36:30 LOG5 end_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2009-Sep-01 00:36:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2009-Sep-01 00:36:30 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2009-Sep-01 00:36:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 00:36:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 00:36:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 00:36:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 00:36:31 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 00:36:31 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 00:36:31 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 00:36:31 LOG5 begin_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2009-Sep-01 00:36:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 00:36:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 00:36:31 INFO2 take_data: Starting WAPP 600-second scan: 924400008 2009-Sep-01 00:36:31 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 00:36:31 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2009-Sep-01 00:36:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 00:36:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 00:36:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 00:36:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16592.00 2009-Sep-01 00:36:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0003.fits 2009-Sep-01 00:36:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0003.fits} 2009-Sep-01 00:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 00:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 00:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 00:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 00:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 00:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 00:36:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 00:46:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 00:46:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 00:46:32 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2009-Sep-01 00:46:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 00:46:32 LOG5 end_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2009-Sep-01 00:46:32 LOG1 fixed_driftmap: New position: year = 2009.6681240652015 RA = 23:00:56.9 RA/Dec = 23:01:28.8 +00:54:25.9 2009-Sep-01 00:46:32 NOTE fixed_driftmap: Correcting ZA to 17:26:47.8 ... 2009-Sep-01 00:46:32 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4466030642 -CF 2009-Sep-01 00:46:32 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 00:46:32 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 00:46:32 LOG5 begin_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2009-Sep-01 00:46:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 00:46:32 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 00:46:32 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2009-Sep-01 00:46:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 00:46:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 00:46:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 00:46:32 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 00:46:32 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2009-Sep-01 00:46:32 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4466030642 -CF 2009-Sep-01 00:46:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:46:32 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 00:46:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 00:46:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:46:32 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 00:46:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 00:46:32 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2009-Sep-01 00:46:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 00:46:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 00:46:32 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 00:46:32 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 00:46:32 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2009-Sep-01 00:46:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:46:33 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 00:46:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 00:46:33 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2009-Sep-01 00:46:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 00:46:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 00:46:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 00:46:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 00:46:33 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 00:46:33 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2009-Sep-01 00:46:33 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 00:46:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 00:46:33 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2009-Sep-01 00:46:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 00:46:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 00:46:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 00:46:33 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2009-Sep-01 00:46:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 00:46:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 00:46:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 00:46:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 00:46:33 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-Sep-01 00:46:33 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 00:46:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 00:46:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 00:46:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 00:46:33 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-Sep-01 00:46:33 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 00:46:33 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 00:46:33 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2009-Sep-01 00:46:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 00:46:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 00:46:33 INFO2 take_data: Starting WAPP 1-second scan: 924400009 2009-Sep-01 00:46:33 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 00:46:33 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2009-Sep-01 00:46:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 00:46:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 00:46:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17194.00 2009-Sep-01 00:46:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 00:46:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:46:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:46:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 00:46:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 00:46:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 00:46:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 00:46:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 00:46:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 00:46:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 00:46:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 00:46:35 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2009-Sep-01 00:46:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 00:46:35 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2009-Sep-01 00:46:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 00:46:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 00:46:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 00:46:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 00:46:35 LOG5 begin_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2009-Sep-01 00:46:35 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 00:46:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 00:46:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 00:46:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 00:46:35 LOG5 end_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2009-Sep-01 00:46:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 00:46:35 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 00:46:35 LOG5 finish_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2009-Sep-01 00:46:35 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 00:46:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 00:46:35 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 00:46:35 LOG5 end_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2009-Sep-01 00:46:35 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2009-Sep-01 00:46:35 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2009-Sep-01 00:46:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 00:46:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 00:46:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 00:46:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 00:46:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 00:46:36 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 00:46:36 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 00:46:36 LOG5 begin_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2009-Sep-01 00:46:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 00:46:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 00:46:36 INFO2 take_data: Starting WAPP 600-second scan: 924400010 2009-Sep-01 00:46:36 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 00:46:36 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2009-Sep-01 00:46:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 00:46:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 00:46:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 00:46:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17197.00 2009-Sep-01 00:46:36 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0004.fits 2009-Sep-01 00:46:36 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0004.fits} 2009-Sep-01 00:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 00:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 00:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 00:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 00:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 00:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 00:46:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 00:50:27 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 00:50:27.301 (seconds: 3027.301)!} 2009-Sep-01 00:50:27 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 00:50:27.301 (seconds: 3027.301)! 2009-Sep-01 00:50:28 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 3026.0 to 3027.0! 2009-Sep-01 00:50:29 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (3026.0 - 3028.0)! 2009-Sep-01 00:56:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 00:56:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 00:56:37 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2009-Sep-01 00:56:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 00:56:37 LOG5 end_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2009-Sep-01 00:56:37 LOG1 fixed_driftmap: New position: year = 2009.6681432364946 RA = 23:11:03.6 RA/Dec = 23:11:35.5 +00:54:28.2 2009-Sep-01 00:56:37 NOTE fixed_driftmap: Correcting ZA to 17:26:45.5 ... 2009-Sep-01 00:56:37 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4459796541 -CF 2009-Sep-01 00:56:37 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 00:56:37 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 00:56:37 LOG5 begin_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2009-Sep-01 00:56:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 00:56:37 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 00:56:37 LOG5 begin_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2009-Sep-01 00:56:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 00:56:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 00:56:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 00:56:37 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 00:56:37 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2009-Sep-01 00:56:37 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4459796541 -CF 2009-Sep-01 00:56:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:56:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 00:56:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 00:56:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:56:37 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 00:56:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 00:56:37 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2009-Sep-01 00:56:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 00:56:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 00:56:37 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 00:56:37 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 00:56:37 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2009-Sep-01 00:56:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 00:56:38 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 00:56:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 00:56:38 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2009-Sep-01 00:56:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 00:56:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 00:56:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 00:56:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 00:56:38 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 00:56:38 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2009-Sep-01 00:56:38 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 00:56:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 00:56:38 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2009-Sep-01 00:56:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 00:56:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 00:56:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 00:56:38 LOG5 end_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2009-Sep-01 00:56:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 00:56:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 00:56:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 00:56:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 00:56:38 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2009-Sep-01 00:56:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 00:56:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 00:56:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 00:56:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 00:56:38 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2009-Sep-01 00:56:38 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 00:56:38 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 00:56:38 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2009-Sep-01 00:56:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 00:56:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 00:56:38 INFO2 take_data: Starting WAPP 1-second scan: 924400011 2009-Sep-01 00:56:38 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 00:56:38 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2009-Sep-01 00:56:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 00:56:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 00:56:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17799.00 2009-Sep-01 00:56:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 00:56:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:56:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:56:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 00:56:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 00:56:40 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 00:56:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 00:56:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 00:56:40 LOG3 WAPP=2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 00:56:40 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 00:56:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 00:56:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 00:56:40 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2009-Sep-01 00:56:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 00:56:40 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2009-Sep-01 00:56:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 00:56:40 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 00:56:40 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 00:56:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 00:56:40 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2009-Sep-01 00:56:40 LOG3 WAPP=1-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 00:56:41 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 00:56:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 00:56:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 00:56:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 00:56:41 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2009-Sep-01 00:56:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 00:56:41 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 00:56:41 LOG5 finish_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2009-Sep-01 00:56:41 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 00:56:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 00:56:41 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 00:56:41 LOG5 end_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2009-Sep-01 00:56:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2009-Sep-01 00:56:41 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2009-Sep-01 00:56:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 00:56:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 00:56:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 00:56:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 00:56:41 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 00:56:41 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 00:56:41 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 00:56:41 LOG5 begin_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2009-Sep-01 00:56:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 00:56:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 00:56:41 INFO2 take_data: Starting WAPP 600-second scan: 924400012 2009-Sep-01 00:56:41 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 00:56:41 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2009-Sep-01 00:56:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 00:56:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 00:56:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 00:56:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17802.00 2009-Sep-01 00:56:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0005.fits 2009-Sep-01 00:56:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0005.fits} 2009-Sep-01 00:56:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 00:56:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:56:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 00:56:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 00:56:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 00:56:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 00:56:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 00:56:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 00:56:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 01:06:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 01:06:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 01:06:42 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2009-Sep-01 01:06:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 01:06:42 LOG5 end_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2009-Sep-01 01:06:42 LOG1 fixed_driftmap: New position: year = 2009.6681624077878 RA = 23:21:10.2 RA/Dec = 23:21:42.1 +00:54:30.0 2009-Sep-01 01:06:42 NOTE fixed_driftmap: Correcting ZA to 17:26:43.7 ... 2009-Sep-01 01:06:42 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4454614202 -CF 2009-Sep-01 01:06:42 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 01:06:42 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 01:06:42 LOG5 begin_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2009-Sep-01 01:06:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 01:06:42 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 01:06:42 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2009-Sep-01 01:06:42 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 01:06:42 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 01:06:42 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 01:06:42 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 01:06:42 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2009-Sep-01 01:06:42 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4454614202 -CF 2009-Sep-01 01:06:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:06:42 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 01:06:42 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 01:06:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:06:43 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 01:06:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 01:06:43 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2009-Sep-01 01:06:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 01:06:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 01:06:43 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 01:06:43 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 01:06:43 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2009-Sep-01 01:06:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:06:43 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 01:06:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 01:06:43 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2009-Sep-01 01:06:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 01:06:43 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 01:06:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 01:06:43 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 01:06:43 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 01:06:43 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2009-Sep-01 01:06:43 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 01:06:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 01:06:43 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2009-Sep-01 01:06:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 01:06:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 01:06:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 01:06:43 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2009-Sep-01 01:06:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 01:06:43 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 01:06:43 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 01:06:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 01:06:43 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2009-Sep-01 01:06:43 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 01:06:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 01:06:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 01:06:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 01:06:43 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2009-Sep-01 01:06:43 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 01:06:43 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 01:06:43 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2009-Sep-01 01:06:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 01:06:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 01:06:43 INFO2 take_data: Starting WAPP 1-second scan: 924400013 2009-Sep-01 01:06:44 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 01:06:44 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2009-Sep-01 01:06:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 01:06:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 01:06:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18405.00 2009-Sep-01 01:06:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 01:06:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:06:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:06:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 01:06:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 01:06:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 01:06:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 01:06:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 01:06:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 01:06:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 01:06:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 01:06:46 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2009-Sep-01 01:06:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 01:06:46 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2009-Sep-01 01:06:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 01:06:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 01:06:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 01:06:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 01:06:46 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2009-Sep-01 01:06:46 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 01:06:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 01:06:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 01:06:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 01:06:46 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2009-Sep-01 01:06:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 01:06:46 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 01:06:46 LOG5 finish_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2009-Sep-01 01:06:46 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 01:06:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 01:06:46 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 01:06:46 LOG5 end_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2009-Sep-01 01:06:46 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2009-Sep-01 01:06:47 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2009-Sep-01 01:06:47 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 01:06:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 01:06:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 01:06:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 01:06:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 01:06:47 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 01:06:47 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 01:06:47 LOG5 begin_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2009-Sep-01 01:06:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 01:06:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 01:06:47 INFO2 take_data: Starting WAPP 600-second scan: 924400014 2009-Sep-01 01:06:47 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 01:06:47 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2009-Sep-01 01:06:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 01:06:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 01:06:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 01:06:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18408.00 2009-Sep-01 01:06:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0006.fits 2009-Sep-01 01:06:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0006.fits} 2009-Sep-01 01:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 01:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 01:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 01:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 01:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 01:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 01:06:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 01:16:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 01:16:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 01:16:48 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2009-Sep-01 01:16:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 01:16:48 LOG5 end_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2009-Sep-01 01:16:48 LOG1 fixed_driftmap: New position: year = 2009.6681816107689 RA = 23:31:17.9 RA/Dec = 23:31:49.8 +00:54:31.5 2009-Sep-01 01:16:48 NOTE fixed_driftmap: Correcting ZA to 17:26:42.2 ... 2009-Sep-01 01:16:48 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4450487740 -CF 2009-Sep-01 01:16:48 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 01:16:48 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 01:16:48 LOG5 begin_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2009-Sep-01 01:16:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 01:16:48 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 01:16:48 LOG5 begin_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2009-Sep-01 01:16:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 01:16:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 01:16:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 01:16:48 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 01:16:48 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2009-Sep-01 01:16:48 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4450487740 -CF 2009-Sep-01 01:16:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:16:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 01:16:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 01:16:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:16:48 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 01:16:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 01:16:48 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2009-Sep-01 01:16:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 01:16:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 01:16:48 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 01:16:48 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 01:16:48 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2009-Sep-01 01:16:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:16:49 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 01:16:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 01:16:49 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2009-Sep-01 01:16:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 01:16:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 01:16:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 01:16:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 01:16:49 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 01:16:49 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2009-Sep-01 01:16:49 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 01:16:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 01:16:49 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2009-Sep-01 01:16:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 01:16:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 01:16:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 01:16:49 LOG5 end_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2009-Sep-01 01:16:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 01:16:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 01:16:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 01:16:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 01:16:49 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2009-Sep-01 01:16:49 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 01:16:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 01:16:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 01:16:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 01:16:49 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2009-Sep-01 01:16:49 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 01:16:49 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 01:16:49 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2009-Sep-01 01:16:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 01:16:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 01:16:49 INFO2 take_data: Starting WAPP 1-second scan: 924400015 2009-Sep-01 01:16:49 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 01:16:49 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2009-Sep-01 01:16:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 01:16:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 01:16:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19010.00 2009-Sep-01 01:16:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 01:16:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:16:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:16:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 01:16:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 01:16:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 01:16:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 01:16:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 01:16:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 01:16:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 01:16:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 01:16:51 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2009-Sep-01 01:16:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 01:16:51 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2009-Sep-01 01:16:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 01:16:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 01:16:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 01:16:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 01:16:51 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2009-Sep-01 01:16:51 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 01:16:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 01:16:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 01:16:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 01:16:51 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2009-Sep-01 01:16:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 01:16:51 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 01:16:51 LOG5 finish_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2009-Sep-01 01:16:51 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 01:16:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 01:16:51 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 01:16:51 LOG5 end_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2009-Sep-01 01:16:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2009-Sep-01 01:16:51 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2009-Sep-01 01:16:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 01:16:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 01:16:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 01:16:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 01:16:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 01:16:52 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 01:16:52 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 01:16:52 LOG5 begin_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2009-Sep-01 01:16:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 01:16:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 01:16:52 INFO2 take_data: Starting WAPP 600-second scan: 924400016 2009-Sep-01 01:16:52 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 01:16:52 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2009-Sep-01 01:16:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 01:16:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 01:16:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 01:16:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19013.00 2009-Sep-01 01:16:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0007.fits 2009-Sep-01 01:16:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0007.fits} 2009-Sep-01 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 01:16:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 01:20:25 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 01:20:25.322 (seconds: 4825.322)!} 2009-Sep-01 01:20:25 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 01:20:25.322 (seconds: 4825.322)! 2009-Sep-01 01:20:26 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 4824.0 to 4825.0! 2009-Sep-01 01:20:27 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (4824.0 - 4826.0)! 2009-Sep-01 01:26:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 01:26:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 01:26:53 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2009-Sep-01 01:26:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 01:26:53 LOG5 end_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2009-Sep-01 01:26:53 LOG1 fixed_driftmap: New position: year = 2009.6682007820621 RA = 23:41:24.5 RA/Dec = 23:41:56.4 +00:54:32.6 2009-Sep-01 01:26:53 NOTE fixed_driftmap: Correcting ZA to 17:26:41.1 ... 2009-Sep-01 01:26:53 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4447438846 -CF 2009-Sep-01 01:26:53 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 01:26:53 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 01:26:53 LOG5 begin_task: Level: (2) ID = <10255> Status = 0 0 0 0 ok 2009-Sep-01 01:26:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 01:26:53 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 01:26:53 LOG5 begin_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2009-Sep-01 01:26:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 01:26:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 01:26:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 01:26:53 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 01:26:53 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2009-Sep-01 01:26:53 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4447438846 -CF 2009-Sep-01 01:26:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:26:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 01:26:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 01:26:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:26:53 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 01:26:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 01:26:53 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2009-Sep-01 01:26:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 01:26:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 01:26:53 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 01:26:53 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 01:26:53 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2009-Sep-01 01:26:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:26:54 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 01:26:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 01:26:54 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2009-Sep-01 01:26:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 01:26:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 01:26:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 01:26:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 01:26:54 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 01:26:54 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2009-Sep-01 01:26:54 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 01:26:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 01:26:54 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2009-Sep-01 01:26:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 01:26:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 01:26:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 01:26:54 LOG5 end_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2009-Sep-01 01:26:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 01:26:54 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 01:26:54 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 01:26:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 01:26:54 LOG5 begin_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2009-Sep-01 01:26:54 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 01:26:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 01:26:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 01:26:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 01:26:54 LOG5 end_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2009-Sep-01 01:26:54 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 01:26:54 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 01:26:54 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2009-Sep-01 01:26:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 01:26:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 01:26:54 INFO2 take_data: Starting WAPP 1-second scan: 924400017 2009-Sep-01 01:26:54 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 01:26:54 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2009-Sep-01 01:26:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 01:26:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 01:26:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19615.00 2009-Sep-01 01:26:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 01:26:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:26:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:26:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 01:26:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 01:26:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 01:26:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 01:26:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 01:26:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 01:26:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 01:26:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 01:26:56 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2009-Sep-01 01:26:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 01:26:56 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2009-Sep-01 01:26:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 01:26:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 01:26:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 01:26:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 01:26:56 LOG5 begin_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2009-Sep-01 01:26:56 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 01:26:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 01:26:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 01:26:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 01:26:56 LOG5 end_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2009-Sep-01 01:26:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 01:26:56 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 01:26:56 LOG5 finish_task: Level: (2) ID = <10255> Status = 0 0 0 0 ok 2009-Sep-01 01:26:56 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 01:26:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 01:26:56 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 01:26:56 LOG5 end_task: Level: (2) ID = <10255> Status = 0 0 0 0 ok 2009-Sep-01 01:26:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2009-Sep-01 01:26:56 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2009-Sep-01 01:26:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 01:26:56 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 01:26:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 01:26:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 01:26:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 01:26:57 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 01:26:57 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 01:26:57 LOG5 begin_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2009-Sep-01 01:26:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 01:26:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 01:26:57 INFO2 take_data: Starting WAPP 600-second scan: 924400018 2009-Sep-01 01:26:57 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 01:26:57 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2009-Sep-01 01:26:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 01:26:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 01:26:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 01:26:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19618.00 2009-Sep-01 01:26:57 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0008.fits 2009-Sep-01 01:26:57 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0008.fits} 2009-Sep-01 01:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 01:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 01:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 01:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 01:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 01:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 01:26:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 01:36:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 01:36:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 01:36:58 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2009-Sep-01 01:36:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 01:36:58 LOG5 end_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2009-Sep-01 01:36:58 LOG1 fixed_driftmap: New position: year = 2009.6682199533552 RA = 23:51:31.2 RA/Dec = 23:52:03.1 +00:54:33.3 2009-Sep-01 01:36:58 NOTE fixed_driftmap: Correcting ZA to 17:26:40.4 ... 2009-Sep-01 01:36:58 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4445465723 -CF 2009-Sep-01 01:36:58 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 01:36:58 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 01:36:58 LOG5 begin_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2009-Sep-01 01:36:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 01:36:58 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 01:36:58 LOG5 begin_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2009-Sep-01 01:36:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 01:36:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 01:36:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 01:36:58 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 01:36:58 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2009-Sep-01 01:36:58 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4445465723 -CF 2009-Sep-01 01:36:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:36:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 01:36:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 01:36:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:36:58 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 01:36:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 01:36:58 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2009-Sep-01 01:36:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 01:36:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 01:36:58 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 01:36:58 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 01:36:58 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2009-Sep-01 01:36:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:36:59 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 01:36:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 01:36:59 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2009-Sep-01 01:36:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 01:36:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 01:36:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 01:36:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 01:36:59 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 01:36:59 LOG5 begin_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2009-Sep-01 01:36:59 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 01:36:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 01:36:59 LOG5 end_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2009-Sep-01 01:36:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 01:36:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 01:36:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 01:36:59 LOG5 end_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2009-Sep-01 01:36:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 01:36:59 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 01:36:59 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 01:36:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 01:36:59 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2009-Sep-01 01:36:59 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 01:36:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 01:36:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 01:36:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 01:36:59 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2009-Sep-01 01:36:59 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 01:36:59 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 01:36:59 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2009-Sep-01 01:36:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 01:36:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 01:36:59 INFO2 take_data: Starting WAPP 1-second scan: 924400019 2009-Sep-01 01:36:59 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 01:36:59 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2009-Sep-01 01:36:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 01:36:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 01:36:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20220.00 2009-Sep-01 01:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 01:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 01:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 01:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 01:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 01:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 01:37:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 01:37:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 01:37:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 01:37:01 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2009-Sep-01 01:37:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 01:37:01 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2009-Sep-01 01:37:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 01:37:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 01:37:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 01:37:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 01:37:01 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2009-Sep-01 01:37:01 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 01:37:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 01:37:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 01:37:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 01:37:01 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2009-Sep-01 01:37:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 01:37:01 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 01:37:01 LOG5 finish_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2009-Sep-01 01:37:01 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 01:37:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 01:37:01 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 01:37:01 LOG5 end_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2009-Sep-01 01:37:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2009-Sep-01 01:37:01 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2009-Sep-01 01:37:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 01:37:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 01:37:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 01:37:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 01:37:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 01:37:02 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 01:37:02 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 01:37:02 LOG5 begin_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2009-Sep-01 01:37:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 01:37:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 01:37:02 INFO2 take_data: Starting WAPP 600-second scan: 924400020 2009-Sep-01 01:37:02 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 01:37:02 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2009-Sep-01 01:37:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 01:37:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 01:37:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 01:37:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20223.00 2009-Sep-01 01:37:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0009.fits 2009-Sep-01 01:37:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0009.fits} 2009-Sep-01 01:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 01:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 01:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 01:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 01:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 01:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 01:37:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 01:47:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 01:47:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 01:47:03 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2009-Sep-01 01:47:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 01:47:03 LOG5 end_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2009-Sep-01 01:47:03 LOG1 fixed_driftmap: New position: year = 2009.6682391246484 RA = 00:01:37.9 RA/Dec = 00:02:09.8 +00:54:33.7 2009-Sep-01 01:47:03 NOTE fixed_driftmap: Correcting ZA to 17:26:40.0 ... 2009-Sep-01 01:47:03 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4444572244 -CF 2009-Sep-01 01:47:03 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 01:47:03 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 01:47:03 LOG5 begin_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2009-Sep-01 01:47:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 01:47:03 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 01:47:03 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2009-Sep-01 01:47:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 01:47:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 01:47:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 01:47:03 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 01:47:03 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2009-Sep-01 01:47:03 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4444572244 -CF 2009-Sep-01 01:47:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:47:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 01:47:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 01:47:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:47:03 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 01:47:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 01:47:03 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2009-Sep-01 01:47:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 01:47:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 01:47:03 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 01:47:03 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 01:47:03 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2009-Sep-01 01:47:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:47:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 01:47:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 01:47:04 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2009-Sep-01 01:47:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 01:47:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 01:47:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 01:47:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 01:47:04 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 01:47:04 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2009-Sep-01 01:47:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 01:47:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 01:47:04 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2009-Sep-01 01:47:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 01:47:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 01:47:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 01:47:04 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2009-Sep-01 01:47:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 01:47:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 01:47:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 01:47:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 01:47:04 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2009-Sep-01 01:47:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 01:47:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 01:47:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 01:47:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 01:47:04 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2009-Sep-01 01:47:04 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 01:47:04 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 01:47:04 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2009-Sep-01 01:47:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 01:47:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 01:47:04 INFO2 take_data: Starting WAPP 1-second scan: 924400021 2009-Sep-01 01:47:04 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 01:47:04 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2009-Sep-01 01:47:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 01:47:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 01:47:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20825.00 2009-Sep-01 01:47:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 01:47:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:47:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:47:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 01:47:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 01:47:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 01:47:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 01:47:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 01:47:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 01:47:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 01:47:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 01:47:06 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2009-Sep-01 01:47:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 01:47:06 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2009-Sep-01 01:47:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 01:47:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 01:47:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 01:47:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 01:47:06 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2009-Sep-01 01:47:06 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 01:47:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 01:47:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 01:47:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 01:47:06 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2009-Sep-01 01:47:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 01:47:06 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 01:47:06 LOG5 finish_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2009-Sep-01 01:47:06 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 01:47:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 01:47:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 01:47:06 LOG5 end_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2009-Sep-01 01:47:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2009-Sep-01 01:47:06 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2009-Sep-01 01:47:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 01:47:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 01:47:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 01:47:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 01:47:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 01:47:07 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 01:47:07 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 01:47:07 LOG5 begin_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2009-Sep-01 01:47:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 01:47:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 01:47:07 INFO2 take_data: Starting WAPP 600-second scan: 924400022 2009-Sep-01 01:47:07 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 01:47:07 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2009-Sep-01 01:47:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 01:47:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 01:47:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 01:47:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20828.00 2009-Sep-01 01:47:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0010.fits 2009-Sep-01 01:47:07 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0010.fits} 2009-Sep-01 01:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 01:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 01:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 01:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 01:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 01:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 01:47:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 01:50:23 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 01:50:23.303 (seconds: 6623.303)!} 2009-Sep-01 01:50:23 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 01:50:23.303 (seconds: 6623.303)! 2009-Sep-01 01:50:24 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 6622.0 to 6623.0! 2009-Sep-01 01:50:25 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (6622.0 - 6624.0)! 2009-Sep-01 01:57:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 01:57:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 01:57:08 LOG5 end_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2009-Sep-01 01:57:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 01:57:08 LOG5 end_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2009-Sep-01 01:57:08 LOG1 fixed_driftmap: New position: year = 2009.6682582959415 RA = 00:11:44.6 RA/Dec = 00:12:16.4 +00:54:33.6 2009-Sep-01 01:57:08 NOTE fixed_driftmap: Correcting ZA to 17:26:40.1 ... 2009-Sep-01 01:57:08 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4444760137 -CF 2009-Sep-01 01:57:08 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 01:57:08 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 01:57:08 LOG5 begin_task: Level: (2) ID = <10288> Status = 0 0 0 0 ok 2009-Sep-01 01:57:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 01:57:08 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 01:57:08 LOG5 begin_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2009-Sep-01 01:57:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 01:57:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 01:57:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 01:57:08 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 01:57:08 LOG5 begin_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2009-Sep-01 01:57:08 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4444760137 -CF 2009-Sep-01 01:57:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:57:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 01:57:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 01:57:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:57:08 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 01:57:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 01:57:08 LOG5 end_task: Level: (4) ID = <10290> Status = 0 0 0 0 ok 2009-Sep-01 01:57:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 01:57:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 01:57:08 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 01:57:08 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 01:57:08 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2009-Sep-01 01:57:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 01:57:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 01:57:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 01:57:09 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2009-Sep-01 01:57:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 01:57:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 01:57:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 01:57:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 01:57:09 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 01:57:09 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2009-Sep-01 01:57:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 01:57:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 01:57:09 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2009-Sep-01 01:57:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 01:57:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 01:57:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 01:57:09 LOG5 end_task: Level: (3) ID = <10289> Status = 0 0 0 0 ok 2009-Sep-01 01:57:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 01:57:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 01:57:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 01:57:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 01:57:09 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2009-Sep-01 01:57:09 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 01:57:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 01:57:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 01:57:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 01:57:09 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2009-Sep-01 01:57:09 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 01:57:09 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 01:57:09 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2009-Sep-01 01:57:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 01:57:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 01:57:09 INFO2 take_data: Starting WAPP 1-second scan: 924400023 2009-Sep-01 01:57:09 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 01:57:09 LOG5 begin_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2009-Sep-01 01:57:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 01:57:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 01:57:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21430.00 2009-Sep-01 01:57:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 01:57:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:57:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:57:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 01:57:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 01:57:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 01:57:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 01:57:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 01:57:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 01:57:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 01:57:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 01:57:11 LOG5 end_task: Level: (4) ID = <10295> Status = 0 0 0 0 ok 2009-Sep-01 01:57:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 01:57:11 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2009-Sep-01 01:57:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 01:57:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 01:57:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 01:57:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 01:57:11 LOG5 begin_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2009-Sep-01 01:57:11 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 01:57:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 01:57:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 01:57:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 01:57:11 LOG5 end_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2009-Sep-01 01:57:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 01:57:11 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 01:57:11 LOG5 finish_task: Level: (2) ID = <10288> Status = 0 0 0 0 ok 2009-Sep-01 01:57:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 01:57:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 01:57:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 01:57:11 LOG5 end_task: Level: (2) ID = <10288> Status = 0 0 0 0 ok 2009-Sep-01 01:57:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2009-Sep-01 01:57:11 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2009-Sep-01 01:57:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 01:57:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 01:57:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 01:57:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 01:57:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 01:57:12 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 01:57:12 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 01:57:12 LOG5 begin_task: Level: (2) ID = <10297> Status = 0 0 0 0 ok 2009-Sep-01 01:57:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 01:57:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 01:57:12 INFO2 take_data: Starting WAPP 600-second scan: 924400024 2009-Sep-01 01:57:12 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 01:57:12 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2009-Sep-01 01:57:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 01:57:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 01:57:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 01:57:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21433.00 2009-Sep-01 01:57:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0011.fits 2009-Sep-01 01:57:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0011.fits} 2009-Sep-01 01:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 01:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 01:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 01:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 01:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 01:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 01:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 01:57:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 02:00:55 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 55075.250613 to 55075.250625! 2009-Sep-01 02:00:56 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (55075.250613 - 55075.250637)! 2009-Sep-01 02:07:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 02:07:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 02:07:13 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2009-Sep-01 02:07:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 02:07:13 LOG5 end_task: Level: (2) ID = <10297> Status = 0 0 0 0 ok 2009-Sep-01 02:07:13 LOG1 fixed_driftmap: New position: year = 2009.6682774672345 RA = 00:21:51.2 RA/Dec = 00:22:23.1 +00:54:33.1 2009-Sep-01 02:07:13 NOTE fixed_driftmap: Correcting ZA to 17:26:40.6 ... 2009-Sep-01 02:07:13 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4446029047 -CF 2009-Sep-01 02:07:13 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 02:07:13 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 02:07:13 LOG5 begin_task: Level: (2) ID = <10299> Status = 0 0 0 0 ok 2009-Sep-01 02:07:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 02:07:13 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 02:07:13 LOG5 begin_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2009-Sep-01 02:07:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 02:07:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 02:07:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 02:07:13 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 02:07:13 LOG5 begin_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2009-Sep-01 02:07:13 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4446029047 -CF 2009-Sep-01 02:07:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:07:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 02:07:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 02:07:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:07:13 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 02:07:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 02:07:13 LOG5 end_task: Level: (4) ID = <10301> Status = 0 0 0 0 ok 2009-Sep-01 02:07:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 02:07:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 02:07:13 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 02:07:13 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 02:07:13 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2009-Sep-01 02:07:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:07:14 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 02:07:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 02:07:14 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2009-Sep-01 02:07:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 02:07:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 02:07:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 02:07:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 02:07:14 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 02:07:14 LOG5 begin_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2009-Sep-01 02:07:14 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 02:07:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 02:07:14 LOG5 end_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2009-Sep-01 02:07:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 02:07:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 02:07:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 02:07:14 LOG5 end_task: Level: (3) ID = <10300> Status = 0 0 0 0 ok 2009-Sep-01 02:07:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 02:07:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 02:07:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 02:07:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 02:07:14 LOG5 begin_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2009-Sep-01 02:07:14 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 02:07:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 02:07:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 02:07:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 02:07:14 LOG5 end_task: Level: (3) ID = <10304> Status = 0 0 0 0 ok 2009-Sep-01 02:07:14 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 02:07:14 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 02:07:14 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2009-Sep-01 02:07:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 02:07:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 02:07:14 INFO2 take_data: Starting WAPP 1-second scan: 924400025 2009-Sep-01 02:07:14 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 02:07:14 LOG5 begin_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2009-Sep-01 02:07:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 02:07:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 02:07:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22035.00 2009-Sep-01 02:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 02:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 02:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 02:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 02:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 02:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 02:07:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 02:07:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 02:07:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 02:07:16 LOG5 end_task: Level: (4) ID = <10306> Status = 0 0 0 0 ok 2009-Sep-01 02:07:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 02:07:16 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2009-Sep-01 02:07:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 02:07:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 02:07:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 02:07:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 02:07:16 LOG5 begin_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2009-Sep-01 02:07:16 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 02:07:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 02:07:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 02:07:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 02:07:16 LOG5 end_task: Level: (3) ID = <10307> Status = 0 0 0 0 ok 2009-Sep-01 02:07:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 02:07:16 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 02:07:16 LOG5 finish_task: Level: (2) ID = <10299> Status = 0 0 0 0 ok 2009-Sep-01 02:07:16 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 02:07:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 02:07:16 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 02:07:16 LOG5 end_task: Level: (2) ID = <10299> Status = 0 0 0 0 ok 2009-Sep-01 02:07:16 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2009-Sep-01 02:07:16 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2009-Sep-01 02:07:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 02:07:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 02:07:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 02:07:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 02:07:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 02:07:17 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 02:07:17 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 02:07:17 LOG5 begin_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2009-Sep-01 02:07:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 02:07:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 02:07:17 INFO2 take_data: Starting WAPP 600-second scan: 924400026 2009-Sep-01 02:07:17 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 02:07:17 LOG5 begin_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2009-Sep-01 02:07:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 02:07:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 02:07:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 02:07:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22038.00 2009-Sep-01 02:07:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0012.fits 2009-Sep-01 02:07:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0012.fits} 2009-Sep-01 02:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 02:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 02:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 02:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 02:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 02:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 02:07:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 02:17:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 02:17:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 02:17:18 LOG5 end_task: Level: (3) ID = <10309> Status = 0 0 0 0 ok 2009-Sep-01 02:17:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 02:17:18 LOG5 end_task: Level: (2) ID = <10308> Status = 0 0 0 0 ok 2009-Sep-01 02:17:18 LOG1 fixed_driftmap: New position: year = 2009.6682966385276 RA = 00:31:57.9 RA/Dec = 00:32:29.7 +00:54:32.3 2009-Sep-01 02:17:18 NOTE fixed_driftmap: Correcting ZA to 17:26:41.4 ... 2009-Sep-01 02:17:18 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4448376482 -CF 2009-Sep-01 02:17:18 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 02:17:18 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 02:17:18 LOG5 begin_task: Level: (2) ID = <10310> Status = 0 0 0 0 ok 2009-Sep-01 02:17:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 02:17:18 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 02:17:18 LOG5 begin_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2009-Sep-01 02:17:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 02:17:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 02:17:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 02:17:18 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 02:17:18 LOG5 begin_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2009-Sep-01 02:17:18 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4448376482 -CF 2009-Sep-01 02:17:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:17:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 02:17:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 02:17:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:17:18 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 02:17:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 02:17:18 LOG5 end_task: Level: (4) ID = <10312> Status = 0 0 0 0 ok 2009-Sep-01 02:17:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 02:17:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 02:17:18 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 02:17:18 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 02:17:18 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2009-Sep-01 02:17:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:17:19 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 02:17:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 02:17:19 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2009-Sep-01 02:17:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 02:17:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 02:17:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 02:17:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 02:17:19 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 02:17:19 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2009-Sep-01 02:17:19 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 02:17:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 02:17:19 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2009-Sep-01 02:17:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 02:17:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 02:17:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 02:17:19 LOG5 end_task: Level: (3) ID = <10311> Status = 0 0 0 0 ok 2009-Sep-01 02:17:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 02:17:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 02:17:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 02:17:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 02:17:19 LOG5 begin_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2009-Sep-01 02:17:19 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 02:17:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 02:17:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 02:17:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 02:17:19 LOG5 end_task: Level: (3) ID = <10315> Status = 0 0 0 0 ok 2009-Sep-01 02:17:19 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 02:17:19 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 02:17:19 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2009-Sep-01 02:17:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 02:17:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 02:17:19 INFO2 take_data: Starting WAPP 1-second scan: 924400027 2009-Sep-01 02:17:19 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 02:17:19 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2009-Sep-01 02:17:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 02:17:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 02:17:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22640.00 2009-Sep-01 02:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 02:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 02:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 02:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 02:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 02:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 02:17:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 02:17:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 02:17:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 02:17:21 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2009-Sep-01 02:17:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 02:17:21 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2009-Sep-01 02:17:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 02:17:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 02:17:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 02:17:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 02:17:21 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2009-Sep-01 02:17:21 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 02:17:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 02:17:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 02:17:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 02:17:21 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2009-Sep-01 02:17:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 02:17:21 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 02:17:21 LOG5 finish_task: Level: (2) ID = <10310> Status = 0 0 0 0 ok 2009-Sep-01 02:17:21 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 02:17:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 02:17:21 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 02:17:21 LOG5 end_task: Level: (2) ID = <10310> Status = 0 0 0 0 ok 2009-Sep-01 02:17:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2009-Sep-01 02:17:21 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2009-Sep-01 02:17:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 02:17:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 02:17:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 02:17:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 02:17:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 02:17:22 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 02:17:22 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 02:17:22 LOG5 begin_task: Level: (2) ID = <10319> Status = 0 0 0 0 ok 2009-Sep-01 02:17:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 02:17:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 02:17:22 INFO2 take_data: Starting WAPP 600-second scan: 924400028 2009-Sep-01 02:17:22 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 02:17:22 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2009-Sep-01 02:17:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 02:17:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 02:17:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 02:17:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22643.00 2009-Sep-01 02:17:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0013.fits 2009-Sep-01 02:17:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0013.fits} 2009-Sep-01 02:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 02:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 02:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 02:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 02:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 02:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 02:17:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 02:20:21 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 02:20:21.304 (seconds: 8421.304)!} 2009-Sep-01 02:20:21 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 02:20:21.304 (seconds: 8421.304)! 2009-Sep-01 02:20:22 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 8420.0 to 8421.0! 2009-Sep-01 02:20:23 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (8420.0 - 8422.0)! 2009-Sep-01 02:27:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 02:27:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 02:27:23 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2009-Sep-01 02:27:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 02:27:23 LOG5 end_task: Level: (2) ID = <10319> Status = 0 0 0 0 ok 2009-Sep-01 02:27:23 LOG1 fixed_driftmap: New position: year = 2009.6683158098208 RA = 00:42:04.6 RA/Dec = 00:42:36.4 +00:54:31.1 2009-Sep-01 02:27:23 NOTE fixed_driftmap: Correcting ZA to 17:26:42.6 ... 2009-Sep-01 02:27:23 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4451797917 -CF 2009-Sep-01 02:27:23 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 02:27:23 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 02:27:23 LOG5 begin_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2009-Sep-01 02:27:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 02:27:23 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 02:27:23 LOG5 begin_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2009-Sep-01 02:27:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 02:27:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 02:27:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 02:27:23 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 02:27:23 LOG5 begin_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2009-Sep-01 02:27:23 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4451797917 -CF 2009-Sep-01 02:27:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:27:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 02:27:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 02:27:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:27:23 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 02:27:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 02:27:23 LOG5 end_task: Level: (4) ID = <10323> Status = 0 0 0 0 ok 2009-Sep-01 02:27:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 02:27:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 02:27:23 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 02:27:23 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 02:27:23 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2009-Sep-01 02:27:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:27:24 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 02:27:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 02:27:24 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2009-Sep-01 02:27:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 02:27:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 02:27:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 02:27:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 02:27:24 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 02:27:24 LOG5 begin_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2009-Sep-01 02:27:24 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 02:27:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 02:27:24 LOG5 end_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2009-Sep-01 02:27:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 02:27:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 02:27:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 02:27:24 LOG5 end_task: Level: (3) ID = <10322> Status = 0 0 0 0 ok 2009-Sep-01 02:27:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 02:27:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 02:27:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 02:27:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 02:27:24 LOG5 begin_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2009-Sep-01 02:27:24 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 02:27:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 02:27:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 02:27:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 02:27:24 LOG5 end_task: Level: (3) ID = <10326> Status = 0 0 0 0 ok 2009-Sep-01 02:27:24 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 02:27:24 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 02:27:24 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2009-Sep-01 02:27:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 02:27:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 02:27:24 INFO2 take_data: Starting WAPP 1-second scan: 924400029 2009-Sep-01 02:27:24 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 02:27:24 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2009-Sep-01 02:27:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 02:27:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 02:27:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23245.00 2009-Sep-01 02:27:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 02:27:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:27:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:27:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 02:27:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 02:27:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 02:27:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 02:27:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 02:27:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 02:27:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 02:27:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 02:27:26 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2009-Sep-01 02:27:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 02:27:26 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2009-Sep-01 02:27:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 02:27:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 02:27:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 02:27:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 02:27:26 LOG5 begin_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2009-Sep-01 02:27:26 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 02:27:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 02:27:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 02:27:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 02:27:26 LOG5 end_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2009-Sep-01 02:27:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 02:27:26 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 02:27:26 LOG5 finish_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2009-Sep-01 02:27:26 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 02:27:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 02:27:26 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 02:27:26 LOG5 end_task: Level: (2) ID = <10321> Status = 0 0 0 0 ok 2009-Sep-01 02:27:26 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 20 of 99 2009-Sep-01 02:27:26 LOG4 send_obs_status: To obs_status: <1> LOOP 20 2009-Sep-01 02:27:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 02:27:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 02:27:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 02:27:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 02:27:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 02:27:27 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 02:27:27 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 02:27:27 LOG5 begin_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2009-Sep-01 02:27:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 02:27:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 02:27:27 INFO2 take_data: Starting WAPP 600-second scan: 924400030 2009-Sep-01 02:27:27 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 02:27:27 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2009-Sep-01 02:27:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 02:27:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 02:27:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 02:27:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23248.00 2009-Sep-01 02:27:27 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0014.fits 2009-Sep-01 02:27:27 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0014.fits} 2009-Sep-01 02:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 02:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 02:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 02:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 02:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 02:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 02:27:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 02:35:20 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 02:35:20.365 (seconds: 9320.365)!} 2009-Sep-01 02:35:20 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 02:35:20.365 (seconds: 9320.365)! 2009-Sep-01 02:35:21 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 9319.0 to 9320.0! 2009-Sep-01 02:35:22 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (9319.0 - 9321.0)! 2009-Sep-01 02:37:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 02:37:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 02:37:28 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2009-Sep-01 02:37:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 02:37:28 LOG5 end_task: Level: (2) ID = <10330> Status = 0 0 0 0 ok 2009-Sep-01 02:37:28 LOG1 fixed_driftmap: New position: year = 2009.668334981114 RA = 00:52:11.3 RA/Dec = 00:52:43.0 +00:54:29.4 2009-Sep-01 02:37:28 NOTE fixed_driftmap: Correcting ZA to 17:26:44.3 ... 2009-Sep-01 02:37:28 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4456286664 -CF 2009-Sep-01 02:37:28 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 02:37:28 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 02:37:28 LOG5 begin_task: Level: (2) ID = <10332> Status = 0 0 0 0 ok 2009-Sep-01 02:37:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 02:37:28 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 02:37:28 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2009-Sep-01 02:37:28 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 02:37:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 02:37:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 02:37:28 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 02:37:28 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2009-Sep-01 02:37:28 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4456286664 -CF 2009-Sep-01 02:37:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:37:28 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 02:37:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 02:37:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:37:28 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 02:37:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 02:37:28 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2009-Sep-01 02:37:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 02:37:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 02:37:28 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 02:37:28 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 02:37:28 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2009-Sep-01 02:37:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:37:29 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 02:37:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 02:37:29 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2009-Sep-01 02:37:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 02:37:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 02:37:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 02:37:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 02:37:29 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 02:37:29 LOG5 begin_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2009-Sep-01 02:37:29 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 02:37:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 02:37:29 LOG5 end_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2009-Sep-01 02:37:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 02:37:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 02:37:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 02:37:29 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2009-Sep-01 02:37:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 02:37:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 02:37:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 02:37:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 02:37:29 LOG5 begin_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2009-Sep-01 02:37:29 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 02:37:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 02:37:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 02:37:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 02:37:29 LOG5 end_task: Level: (3) ID = <10337> Status = 0 0 0 0 ok 2009-Sep-01 02:37:29 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 02:37:29 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 02:37:29 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2009-Sep-01 02:37:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 02:37:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 02:37:29 INFO2 take_data: Starting WAPP 1-second scan: 924400031 2009-Sep-01 02:37:29 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 02:37:29 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2009-Sep-01 02:37:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 02:37:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 02:37:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23850.00 2009-Sep-01 02:37:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 02:37:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:37:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:37:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 02:37:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 02:37:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 02:37:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 02:37:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 02:37:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 02:37:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 02:37:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 02:37:31 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2009-Sep-01 02:37:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 02:37:31 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2009-Sep-01 02:37:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 02:37:31 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 02:37:31 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 02:37:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 02:37:31 LOG5 begin_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2009-Sep-01 02:37:31 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 02:37:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 02:37:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 02:37:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 02:37:31 LOG5 end_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2009-Sep-01 02:37:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 02:37:31 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 02:37:31 LOG5 finish_task: Level: (2) ID = <10332> Status = 0 0 0 0 ok 2009-Sep-01 02:37:31 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 02:37:31 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 02:37:31 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 02:37:31 LOG5 end_task: Level: (2) ID = <10332> Status = 0 0 0 0 ok 2009-Sep-01 02:37:31 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 21 of 99 2009-Sep-01 02:37:31 LOG4 send_obs_status: To obs_status: <1> LOOP 21 2009-Sep-01 02:37:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 02:37:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 02:37:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 02:37:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 02:37:32 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 02:37:32 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 02:37:32 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 02:37:32 LOG5 begin_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2009-Sep-01 02:37:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 02:37:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 02:37:32 INFO2 take_data: Starting WAPP 600-second scan: 924400032 2009-Sep-01 02:37:32 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 02:37:32 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2009-Sep-01 02:37:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 02:37:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 02:37:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 02:37:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23853.00 2009-Sep-01 02:37:32 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0015.fits 2009-Sep-01 02:37:32 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0015.fits} 2009-Sep-01 02:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 02:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 02:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 02:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 02:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 02:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 02:37:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 02:47:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 02:47:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 02:47:33 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2009-Sep-01 02:47:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 02:47:33 LOG5 end_task: Level: (2) ID = <10341> Status = 0 0 0 0 ok 2009-Sep-01 02:47:33 LOG1 fixed_driftmap: New position: year = 2009.6683541524071 RA = 01:02:17.9 RA/Dec = 01:02:49.7 +00:54:27.4 2009-Sep-01 02:47:33 NOTE fixed_driftmap: Correcting ZA to 17:26:46.3 ... 2009-Sep-01 02:47:33 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4461833978 -CF 2009-Sep-01 02:47:33 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 02:47:33 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 02:47:33 LOG5 begin_task: Level: (2) ID = <10343> Status = 0 0 0 0 ok 2009-Sep-01 02:47:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 02:47:33 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 02:47:33 LOG5 begin_task: Level: (3) ID = <10344> Status = 0 0 0 0 ok 2009-Sep-01 02:47:33 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 02:47:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 02:47:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 02:47:33 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 02:47:33 LOG5 begin_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2009-Sep-01 02:47:33 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4461833978 -CF 2009-Sep-01 02:47:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:47:33 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 02:47:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 02:47:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:47:33 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 02:47:33 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 02:47:33 LOG5 end_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2009-Sep-01 02:47:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 02:47:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 02:47:33 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 02:47:33 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 02:47:33 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2009-Sep-01 02:47:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:47:34 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 02:47:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 02:47:34 LOG5 end_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2009-Sep-01 02:47:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 02:47:34 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 02:47:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 02:47:34 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 02:47:34 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 02:47:34 LOG5 begin_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2009-Sep-01 02:47:34 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 02:47:34 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 02:47:34 LOG5 end_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2009-Sep-01 02:47:34 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 02:47:34 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 02:47:34 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 02:47:34 LOG5 end_task: Level: (3) ID = <10344> Status = 0 0 0 0 ok 2009-Sep-01 02:47:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 02:47:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 02:47:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 02:47:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 02:47:34 LOG5 begin_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2009-Sep-01 02:47:34 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 02:47:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 02:47:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 02:47:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 02:47:34 LOG5 end_task: Level: (3) ID = <10348> Status = 0 0 0 0 ok 2009-Sep-01 02:47:34 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 02:47:34 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 02:47:34 LOG5 begin_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2009-Sep-01 02:47:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 02:47:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 02:47:34 INFO2 take_data: Starting WAPP 1-second scan: 924400033 2009-Sep-01 02:47:34 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 02:47:34 LOG5 begin_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2009-Sep-01 02:47:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 02:47:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 02:47:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24455.00 2009-Sep-01 02:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 02:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 02:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 02:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 02:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 02:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 02:47:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 02:47:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 02:47:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 02:47:36 LOG5 end_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2009-Sep-01 02:47:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 02:47:36 LOG5 end_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2009-Sep-01 02:47:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 02:47:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 02:47:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 02:47:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 02:47:36 LOG5 begin_task: Level: (3) ID = <10351> Status = 0 0 0 0 ok 2009-Sep-01 02:47:36 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 02:47:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 02:47:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 02:47:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 02:47:36 LOG5 end_task: Level: (3) ID = <10351> Status = 0 0 0 0 ok 2009-Sep-01 02:47:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 02:47:36 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 02:47:36 LOG5 finish_task: Level: (2) ID = <10343> Status = 0 0 0 0 ok 2009-Sep-01 02:47:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 02:47:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 02:47:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 02:47:36 LOG5 end_task: Level: (2) ID = <10343> Status = 0 0 0 0 ok 2009-Sep-01 02:47:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 22 of 99 2009-Sep-01 02:47:36 LOG4 send_obs_status: To obs_status: <1> LOOP 22 2009-Sep-01 02:47:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 02:47:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 02:47:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 02:47:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 02:47:37 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 02:47:37 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 02:47:37 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 02:47:37 LOG5 begin_task: Level: (2) ID = <10352> Status = 0 0 0 0 ok 2009-Sep-01 02:47:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 02:47:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 02:47:37 INFO2 take_data: Starting WAPP 600-second scan: 924400034 2009-Sep-01 02:47:37 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 02:47:37 LOG5 begin_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2009-Sep-01 02:47:37 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 02:47:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 02:47:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 02:47:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24458.00 2009-Sep-01 02:47:37 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0016.fits 2009-Sep-01 02:47:37 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0016.fits} 2009-Sep-01 02:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 02:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 02:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 02:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 02:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 02:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 02:47:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 02:57:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 02:57:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 02:57:38 LOG5 end_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2009-Sep-01 02:57:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 02:57:38 LOG5 end_task: Level: (2) ID = <10352> Status = 0 0 0 0 ok 2009-Sep-01 02:57:38 LOG1 fixed_driftmap: New position: year = 2009.6683733237003 RA = 01:12:24.6 RA/Dec = 01:12:56.4 +00:54:25.1 2009-Sep-01 02:57:38 NOTE fixed_driftmap: Correcting ZA to 17:26:48.6 ... 2009-Sep-01 02:57:38 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4468429143 -CF 2009-Sep-01 02:57:38 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 02:57:38 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 02:57:38 LOG5 begin_task: Level: (2) ID = <10354> Status = 0 0 0 0 ok 2009-Sep-01 02:57:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 02:57:38 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 02:57:38 LOG5 begin_task: Level: (3) ID = <10355> Status = 0 0 0 0 ok 2009-Sep-01 02:57:38 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 02:57:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 02:57:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 02:57:38 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 02:57:38 LOG5 begin_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2009-Sep-01 02:57:38 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4468429143 -CF 2009-Sep-01 02:57:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:57:38 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 02:57:38 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 02:57:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:57:38 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 02:57:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 02:57:38 LOG5 end_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2009-Sep-01 02:57:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 02:57:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 02:57:38 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 02:57:38 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 02:57:38 LOG5 begin_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2009-Sep-01 02:57:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 02:57:39 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 02:57:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 02:57:39 LOG5 end_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2009-Sep-01 02:57:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 02:57:39 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 02:57:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 02:57:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 02:57:39 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 02:57:39 LOG5 begin_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2009-Sep-01 02:57:39 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 02:57:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 02:57:39 LOG5 end_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2009-Sep-01 02:57:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 02:57:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 02:57:39 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 02:57:39 LOG5 end_task: Level: (3) ID = <10355> Status = 0 0 0 0 ok 2009-Sep-01 02:57:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 02:57:39 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 02:57:39 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 02:57:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 02:57:39 LOG5 begin_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2009-Sep-01 02:57:39 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 02:57:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 02:57:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 02:57:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 02:57:39 LOG5 end_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2009-Sep-01 02:57:39 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 02:57:39 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 02:57:39 LOG5 begin_task: Level: (3) ID = <10360> Status = 0 0 0 0 ok 2009-Sep-01 02:57:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 02:57:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 02:57:39 INFO2 take_data: Starting WAPP 1-second scan: 924400035 2009-Sep-01 02:57:39 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 02:57:39 LOG5 begin_task: Level: (4) ID = <10361> Status = 0 0 0 0 ok 2009-Sep-01 02:57:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 02:57:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 02:57:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25060.00 2009-Sep-01 02:57:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 02:57:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:57:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:57:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 02:57:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 02:57:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 02:57:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 02:57:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 02:57:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 02:57:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 02:57:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 02:57:41 LOG5 end_task: Level: (4) ID = <10361> Status = 0 0 0 0 ok 2009-Sep-01 02:57:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 02:57:41 LOG5 end_task: Level: (3) ID = <10360> Status = 0 0 0 0 ok 2009-Sep-01 02:57:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 02:57:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 02:57:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 02:57:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 02:57:41 LOG5 begin_task: Level: (3) ID = <10362> Status = 0 0 0 0 ok 2009-Sep-01 02:57:41 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 02:57:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 02:57:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 02:57:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 02:57:41 LOG5 end_task: Level: (3) ID = <10362> Status = 0 0 0 0 ok 2009-Sep-01 02:57:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 02:57:41 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 02:57:41 LOG5 finish_task: Level: (2) ID = <10354> Status = 0 0 0 0 ok 2009-Sep-01 02:57:41 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 02:57:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 02:57:41 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 02:57:41 LOG5 end_task: Level: (2) ID = <10354> Status = 0 0 0 0 ok 2009-Sep-01 02:57:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 23 of 99 2009-Sep-01 02:57:41 LOG4 send_obs_status: To obs_status: <1> LOOP 23 2009-Sep-01 02:57:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 02:57:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 02:57:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 02:57:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 02:57:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 02:57:42 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 02:57:42 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 02:57:42 LOG5 begin_task: Level: (2) ID = <10363> Status = 0 0 0 0 ok 2009-Sep-01 02:57:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 02:57:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 02:57:42 INFO2 take_data: Starting WAPP 600-second scan: 924400036 2009-Sep-01 02:57:42 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 02:57:42 LOG5 begin_task: Level: (3) ID = <10364> Status = 0 0 0 0 ok 2009-Sep-01 02:57:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 02:57:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 02:57:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 02:57:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25063.00 2009-Sep-01 02:57:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0017.fits 2009-Sep-01 02:57:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0017.fits} 2009-Sep-01 02:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 02:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 02:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 02:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 02:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 02:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 02:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 02:57:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 03:05:18 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 03:05:18.296 (seconds: 11118.296)!} 2009-Sep-01 03:05:18 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 03:05:18.296 (seconds: 11118.296)! 2009-Sep-01 03:05:19 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 11117.0 to 11118.0! 2009-Sep-01 03:05:20 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (11117.0 - 11119.0)! 2009-Sep-01 03:07:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 03:07:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 03:07:43 LOG5 end_task: Level: (3) ID = <10364> Status = 0 0 0 0 ok 2009-Sep-01 03:07:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 03:07:43 LOG5 end_task: Level: (2) ID = <10363> Status = 0 0 0 0 ok 2009-Sep-01 03:07:43 LOG1 fixed_driftmap: New position: year = 2009.6683924949934 RA = 01:22:31.3 RA/Dec = 01:23:03.0 +00:54:22.3 2009-Sep-01 03:07:43 NOTE fixed_driftmap: Correcting ZA to 17:26:51.4 ... 2009-Sep-01 03:07:43 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4476059208 -CF 2009-Sep-01 03:07:43 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 03:07:43 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 03:07:43 LOG5 begin_task: Level: (2) ID = <10365> Status = 0 0 0 0 ok 2009-Sep-01 03:07:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 03:07:43 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 03:07:43 LOG5 begin_task: Level: (3) ID = <10366> Status = 0 0 0 0 ok 2009-Sep-01 03:07:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 03:07:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 03:07:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 03:07:43 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 03:07:43 LOG5 begin_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2009-Sep-01 03:07:43 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4476059208 -CF 2009-Sep-01 03:07:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:07:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 03:07:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 03:07:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:07:43 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 03:07:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 03:07:43 LOG5 end_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2009-Sep-01 03:07:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 03:07:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 03:07:43 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 03:07:43 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 03:07:43 LOG5 begin_task: Level: (4) ID = <10368> Status = 0 0 0 0 ok 2009-Sep-01 03:07:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:07:44 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 03:07:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 03:07:44 LOG5 end_task: Level: (4) ID = <10368> Status = 0 0 0 0 ok 2009-Sep-01 03:07:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 03:07:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 03:07:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 03:07:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 03:07:44 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 03:07:44 LOG5 begin_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2009-Sep-01 03:07:44 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 03:07:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 03:07:44 LOG5 end_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2009-Sep-01 03:07:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 03:07:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 03:07:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 03:07:44 LOG5 end_task: Level: (3) ID = <10366> Status = 0 0 0 0 ok 2009-Sep-01 03:07:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 03:07:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 03:07:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 03:07:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 03:07:44 LOG5 begin_task: Level: (3) ID = <10370> Status = 0 0 0 0 ok 2009-Sep-01 03:07:44 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 03:07:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 03:07:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 03:07:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 03:07:44 LOG5 end_task: Level: (3) ID = <10370> Status = 0 0 0 0 ok 2009-Sep-01 03:07:44 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 03:07:44 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 03:07:44 LOG5 begin_task: Level: (3) ID = <10371> Status = 0 0 0 0 ok 2009-Sep-01 03:07:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 03:07:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 03:07:44 INFO2 take_data: Starting WAPP 1-second scan: 924400037 2009-Sep-01 03:07:44 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 03:07:44 LOG5 begin_task: Level: (4) ID = <10372> Status = 0 0 0 0 ok 2009-Sep-01 03:07:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 03:07:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 03:07:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25665.00 2009-Sep-01 03:07:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 03:07:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:07:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:07:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 03:07:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 03:07:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 03:07:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 03:07:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 03:07:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 03:07:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 03:07:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 03:07:46 LOG5 end_task: Level: (4) ID = <10372> Status = 0 0 0 0 ok 2009-Sep-01 03:07:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 03:07:46 LOG5 end_task: Level: (3) ID = <10371> Status = 0 0 0 0 ok 2009-Sep-01 03:07:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 03:07:46 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 03:07:46 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 03:07:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 03:07:46 LOG5 begin_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2009-Sep-01 03:07:46 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 03:07:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 03:07:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 03:07:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 03:07:46 LOG5 end_task: Level: (3) ID = <10373> Status = 0 0 0 0 ok 2009-Sep-01 03:07:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 03:07:46 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 03:07:46 LOG5 finish_task: Level: (2) ID = <10365> Status = 0 0 0 0 ok 2009-Sep-01 03:07:46 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 03:07:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 03:07:46 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 03:07:46 LOG5 end_task: Level: (2) ID = <10365> Status = 0 0 0 0 ok 2009-Sep-01 03:07:46 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 24 of 99 2009-Sep-01 03:07:46 LOG4 send_obs_status: To obs_status: <1> LOOP 24 2009-Sep-01 03:07:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 03:07:47 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 03:07:47 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 03:07:47 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 03:07:47 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 03:07:47 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 03:07:47 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 03:07:47 LOG5 begin_task: Level: (2) ID = <10374> Status = 0 0 0 0 ok 2009-Sep-01 03:07:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 03:07:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 03:07:47 INFO2 take_data: Starting WAPP 600-second scan: 924400038 2009-Sep-01 03:07:47 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 03:07:47 LOG5 begin_task: Level: (3) ID = <10375> Status = 0 0 0 0 ok 2009-Sep-01 03:07:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 03:07:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 03:07:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 03:07:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25668.00 2009-Sep-01 03:07:47 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0018.fits 2009-Sep-01 03:07:47 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0018.fits} 2009-Sep-01 03:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 03:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 03:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 03:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 03:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 03:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 03:07:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 03:17:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 03:17:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 03:17:48 LOG5 end_task: Level: (3) ID = <10375> Status = 0 0 0 0 ok 2009-Sep-01 03:17:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 03:17:48 LOG5 end_task: Level: (2) ID = <10374> Status = 0 0 0 0 ok 2009-Sep-01 03:17:48 LOG1 fixed_driftmap: New position: year = 2009.6684116662864 RA = 01:32:38.0 RA/Dec = 01:33:09.7 +00:54:19.2 2009-Sep-01 03:17:48 NOTE fixed_driftmap: Correcting ZA to 17:26:54.5 ... 2009-Sep-01 03:17:48 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4484709465 -CF 2009-Sep-01 03:17:48 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 03:17:48 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 03:17:48 LOG5 begin_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2009-Sep-01 03:17:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 03:17:48 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 03:17:48 LOG5 begin_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2009-Sep-01 03:17:48 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 03:17:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 03:17:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 03:17:48 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 03:17:48 LOG5 begin_task: Level: (4) ID = <10378> Status = 0 0 0 0 ok 2009-Sep-01 03:17:48 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4484709465 -CF 2009-Sep-01 03:17:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:17:48 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 03:17:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 03:17:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:17:48 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 03:17:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 03:17:48 LOG5 end_task: Level: (4) ID = <10378> Status = 0 0 0 0 ok 2009-Sep-01 03:17:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 03:17:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 03:17:48 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 03:17:48 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 03:17:48 LOG5 begin_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2009-Sep-01 03:17:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:17:48 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 03:17:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 03:17:48 LOG5 end_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2009-Sep-01 03:17:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 03:17:49 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 03:17:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 03:17:49 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 03:17:49 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 03:17:49 LOG5 begin_task: Level: (4) ID = <10380> Status = 0 0 0 0 ok 2009-Sep-01 03:17:49 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 03:17:49 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 03:17:49 LOG5 end_task: Level: (4) ID = <10380> Status = 0 0 0 0 ok 2009-Sep-01 03:17:49 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 03:17:49 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 03:17:49 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 03:17:49 LOG5 end_task: Level: (3) ID = <10377> Status = 0 0 0 0 ok 2009-Sep-01 03:17:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 03:17:49 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 03:17:49 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 03:17:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 03:17:49 LOG5 begin_task: Level: (3) ID = <10381> Status = 0 0 0 0 ok 2009-Sep-01 03:17:49 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 03:17:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 03:17:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 03:17:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 03:17:49 LOG5 end_task: Level: (3) ID = <10381> Status = 0 0 0 0 ok 2009-Sep-01 03:17:49 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 03:17:49 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 03:17:49 LOG5 begin_task: Level: (3) ID = <10382> Status = 0 0 0 0 ok 2009-Sep-01 03:17:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 03:17:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 03:17:49 INFO2 take_data: Starting WAPP 1-second scan: 924400039 2009-Sep-01 03:17:49 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 03:17:49 LOG5 begin_task: Level: (4) ID = <10383> Status = 0 0 0 0 ok 2009-Sep-01 03:17:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 03:17:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 03:17:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26270.00 2009-Sep-01 03:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 03:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 03:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 03:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 03:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 03:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 03:17:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 03:17:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 03:17:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 03:17:51 LOG5 end_task: Level: (4) ID = <10383> Status = 0 0 0 0 ok 2009-Sep-01 03:17:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 03:17:51 LOG5 end_task: Level: (3) ID = <10382> Status = 0 0 0 0 ok 2009-Sep-01 03:17:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 03:17:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 03:17:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 03:17:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 03:17:51 LOG5 begin_task: Level: (3) ID = <10384> Status = 0 0 0 0 ok 2009-Sep-01 03:17:52 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 03:17:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 03:17:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 03:17:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 03:17:52 LOG5 end_task: Level: (3) ID = <10384> Status = 0 0 0 0 ok 2009-Sep-01 03:17:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 03:17:52 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 03:17:52 LOG5 finish_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2009-Sep-01 03:17:52 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 03:17:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 03:17:52 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 03:17:52 LOG5 end_task: Level: (2) ID = <10376> Status = 0 0 0 0 ok 2009-Sep-01 03:17:52 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 25 of 99 2009-Sep-01 03:17:52 LOG4 send_obs_status: To obs_status: <1> LOOP 25 2009-Sep-01 03:17:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 03:17:52 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 03:17:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 03:17:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 03:17:52 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 03:17:52 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 03:17:52 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 03:17:52 LOG5 begin_task: Level: (2) ID = <10385> Status = 0 0 0 0 ok 2009-Sep-01 03:17:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 03:17:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 03:17:52 INFO2 take_data: Starting WAPP 600-second scan: 924400040 2009-Sep-01 03:17:52 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 03:17:52 LOG5 begin_task: Level: (3) ID = <10386> Status = 0 0 0 0 ok 2009-Sep-01 03:17:52 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 03:17:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 03:17:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 03:17:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26273.00 2009-Sep-01 03:17:52 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0019.fits 2009-Sep-01 03:17:52 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0019.fits} 2009-Sep-01 03:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 03:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 03:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 03:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 03:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 03:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 03:17:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 03:27:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 03:27:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 03:27:53 LOG5 end_task: Level: (3) ID = <10386> Status = 0 0 0 0 ok 2009-Sep-01 03:27:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 03:27:53 LOG5 end_task: Level: (2) ID = <10385> Status = 0 0 0 0 ok 2009-Sep-01 03:27:53 LOG1 fixed_driftmap: New position: year = 2009.6684308375795 RA = 01:42:44.7 RA/Dec = 01:43:16.3 +00:54:15.7 2009-Sep-01 03:27:53 NOTE fixed_driftmap: Correcting ZA to 17:26:58.0 ... 2009-Sep-01 03:27:53 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4494362929 -CF 2009-Sep-01 03:27:53 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 03:27:53 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 03:27:53 LOG5 begin_task: Level: (2) ID = <10387> Status = 0 0 0 0 ok 2009-Sep-01 03:27:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 03:27:53 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 03:27:53 LOG5 begin_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2009-Sep-01 03:27:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 03:27:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 03:27:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 03:27:53 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 03:27:53 LOG5 begin_task: Level: (4) ID = <10389> Status = 0 0 0 0 ok 2009-Sep-01 03:27:53 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4494362929 -CF 2009-Sep-01 03:27:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:27:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 03:27:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 03:27:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:27:54 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 03:27:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 03:27:54 LOG5 end_task: Level: (4) ID = <10389> Status = 0 0 0 0 ok 2009-Sep-01 03:27:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 03:27:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 03:27:54 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 03:27:54 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 03:27:54 LOG5 begin_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2009-Sep-01 03:27:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:27:54 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 03:27:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 03:27:54 LOG5 end_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2009-Sep-01 03:27:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 03:27:54 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 03:27:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 03:27:54 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 03:27:54 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 03:27:54 LOG5 begin_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2009-Sep-01 03:27:54 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 03:27:54 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 03:27:54 LOG5 end_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2009-Sep-01 03:27:54 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 03:27:54 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 03:27:54 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 03:27:54 LOG5 end_task: Level: (3) ID = <10388> Status = 0 0 0 0 ok 2009-Sep-01 03:27:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 03:27:54 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 03:27:54 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 03:27:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 03:27:54 LOG5 begin_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2009-Sep-01 03:27:54 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 03:27:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 03:27:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 03:27:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 03:27:54 LOG5 end_task: Level: (3) ID = <10392> Status = 0 0 0 0 ok 2009-Sep-01 03:27:54 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 03:27:54 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 03:27:54 LOG5 begin_task: Level: (3) ID = <10393> Status = 0 0 0 0 ok 2009-Sep-01 03:27:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 03:27:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 03:27:54 INFO2 take_data: Starting WAPP 1-second scan: 924400041 2009-Sep-01 03:27:54 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 03:27:54 LOG5 begin_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2009-Sep-01 03:27:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 03:27:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 03:27:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26875.00 2009-Sep-01 03:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 03:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 03:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 03:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 03:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 03:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 03:27:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 03:27:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 03:27:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 03:27:56 LOG5 end_task: Level: (4) ID = <10394> Status = 0 0 0 0 ok 2009-Sep-01 03:27:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 03:27:56 LOG5 end_task: Level: (3) ID = <10393> Status = 0 0 0 0 ok 2009-Sep-01 03:27:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 03:27:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 03:27:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 03:27:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 03:27:56 LOG5 begin_task: Level: (3) ID = <10395> Status = 0 0 0 0 ok 2009-Sep-01 03:27:56 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 03:27:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 03:27:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 03:27:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 03:27:56 LOG5 end_task: Level: (3) ID = <10395> Status = 0 0 0 0 ok 2009-Sep-01 03:27:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 03:27:56 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 03:27:56 LOG5 finish_task: Level: (2) ID = <10387> Status = 0 0 0 0 ok 2009-Sep-01 03:27:56 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 03:27:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 03:27:56 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 03:27:56 LOG5 end_task: Level: (2) ID = <10387> Status = 0 0 0 0 ok 2009-Sep-01 03:27:57 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 26 of 99 2009-Sep-01 03:27:57 LOG4 send_obs_status: To obs_status: <1> LOOP 26 2009-Sep-01 03:27:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 03:27:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 03:27:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 03:27:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 03:27:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 03:27:57 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 03:27:57 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 03:27:57 LOG5 begin_task: Level: (2) ID = <10396> Status = 0 0 0 0 ok 2009-Sep-01 03:27:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 03:27:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 03:27:57 INFO2 take_data: Starting WAPP 600-second scan: 924400042 2009-Sep-01 03:27:57 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 03:27:57 LOG5 begin_task: Level: (3) ID = <10397> Status = 0 0 0 0 ok 2009-Sep-01 03:27:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 03:27:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 03:27:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 03:27:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26878.00 2009-Sep-01 03:27:57 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0020.fits 2009-Sep-01 03:27:57 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0020.fits} 2009-Sep-01 03:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 03:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 03:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 03:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 03:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 03:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 03:27:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 03:37:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 03:37:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 03:37:58 LOG5 end_task: Level: (3) ID = <10397> Status = 0 0 0 0 ok 2009-Sep-01 03:37:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 03:37:58 LOG5 end_task: Level: (2) ID = <10396> Status = 0 0 0 0 ok 2009-Sep-01 03:37:58 LOG1 fixed_driftmap: New position: year = 2009.6684500088727 RA = 01:52:51.4 RA/Dec = 01:53:23.0 +00:54:11.9 2009-Sep-01 03:37:58 NOTE fixed_driftmap: Correcting ZA to 17:27:01.8 ... 2009-Sep-01 03:37:58 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4505000991 -CF 2009-Sep-01 03:37:58 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 03:37:58 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 03:37:58 LOG5 begin_task: Level: (2) ID = <10398> Status = 0 0 0 0 ok 2009-Sep-01 03:37:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 03:37:58 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 03:37:58 LOG5 begin_task: Level: (3) ID = <10399> Status = 0 0 0 0 ok 2009-Sep-01 03:37:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 03:37:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 03:37:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 03:37:58 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 03:37:58 LOG5 begin_task: Level: (4) ID = <10400> Status = 0 0 0 0 ok 2009-Sep-01 03:37:58 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4505000991 -CF 2009-Sep-01 03:37:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:37:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 03:37:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 03:37:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:37:58 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 03:37:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 03:37:58 LOG5 end_task: Level: (4) ID = <10400> Status = 0 0 0 0 ok 2009-Sep-01 03:37:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 03:37:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 03:37:58 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 03:37:58 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 03:37:58 LOG5 begin_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2009-Sep-01 03:37:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:37:59 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 03:37:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 03:37:59 LOG5 end_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2009-Sep-01 03:37:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 03:37:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 03:37:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 03:37:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 03:37:59 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 03:37:59 LOG5 begin_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2009-Sep-01 03:37:59 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 03:37:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 03:37:59 LOG5 end_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2009-Sep-01 03:37:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 03:37:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 03:37:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 03:37:59 LOG5 end_task: Level: (3) ID = <10399> Status = 0 0 0 0 ok 2009-Sep-01 03:37:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 03:37:59 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 03:37:59 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 03:37:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 03:37:59 LOG5 begin_task: Level: (3) ID = <10403> Status = 0 0 0 0 ok 2009-Sep-01 03:37:59 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 03:37:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 03:37:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 03:37:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 03:37:59 LOG5 end_task: Level: (3) ID = <10403> Status = 0 0 0 0 ok 2009-Sep-01 03:37:59 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 03:37:59 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 03:37:59 LOG5 begin_task: Level: (3) ID = <10404> Status = 0 0 0 0 ok 2009-Sep-01 03:37:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 03:37:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 03:37:59 INFO2 take_data: Starting WAPP 1-second scan: 924400043 2009-Sep-01 03:37:59 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 03:37:59 LOG5 begin_task: Level: (4) ID = <10405> Status = 0 0 0 0 ok 2009-Sep-01 03:37:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 03:37:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 03:37:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27480.00 2009-Sep-01 03:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 03:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 03:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 03:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 03:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 03:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 03:38:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 03:38:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 03:38:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 03:38:01 LOG5 end_task: Level: (4) ID = <10405> Status = 0 0 0 0 ok 2009-Sep-01 03:38:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 03:38:01 LOG5 end_task: Level: (3) ID = <10404> Status = 0 0 0 0 ok 2009-Sep-01 03:38:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 03:38:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 03:38:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 03:38:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 03:38:01 LOG5 begin_task: Level: (3) ID = <10406> Status = 0 0 0 0 ok 2009-Sep-01 03:38:01 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 03:38:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 03:38:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 03:38:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 03:38:01 LOG5 end_task: Level: (3) ID = <10406> Status = 0 0 0 0 ok 2009-Sep-01 03:38:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 03:38:01 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 03:38:01 LOG5 finish_task: Level: (2) ID = <10398> Status = 0 0 0 0 ok 2009-Sep-01 03:38:01 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 03:38:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 03:38:01 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 03:38:01 LOG5 end_task: Level: (2) ID = <10398> Status = 0 0 0 0 ok 2009-Sep-01 03:38:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 27 of 99 2009-Sep-01 03:38:01 LOG4 send_obs_status: To obs_status: <1> LOOP 27 2009-Sep-01 03:38:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 03:38:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 03:38:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 03:38:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 03:38:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 03:38:02 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 03:38:02 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 03:38:02 LOG5 begin_task: Level: (2) ID = <10407> Status = 0 0 0 0 ok 2009-Sep-01 03:38:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 03:38:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 03:38:02 INFO2 take_data: Starting WAPP 600-second scan: 924400044 2009-Sep-01 03:38:02 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 03:38:02 LOG5 begin_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2009-Sep-01 03:38:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 03:38:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 03:38:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 03:38:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27483.00 2009-Sep-01 03:38:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0021.fits 2009-Sep-01 03:38:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0021.fits} 2009-Sep-01 03:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 03:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 03:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 03:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 03:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 03:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 03:38:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 03:48:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 03:48:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 03:48:03 LOG5 end_task: Level: (3) ID = <10408> Status = 0 0 0 0 ok 2009-Sep-01 03:48:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 03:48:03 LOG5 end_task: Level: (2) ID = <10407> Status = 0 0 0 0 ok 2009-Sep-01 03:48:03 LOG1 fixed_driftmap: New position: year = 2009.6684691801659 RA = 02:02:58.1 RA/Dec = 02:03:29.6 +00:54:07.7 2009-Sep-01 03:48:03 NOTE fixed_driftmap: Correcting ZA to 17:27:06.0 ... 2009-Sep-01 03:48:03 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4516602765 -CF 2009-Sep-01 03:48:03 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 03:48:03 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 03:48:03 LOG5 begin_task: Level: (2) ID = <10409> Status = 0 0 0 0 ok 2009-Sep-01 03:48:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 03:48:03 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 03:48:03 LOG5 begin_task: Level: (3) ID = <10410> Status = 0 0 0 0 ok 2009-Sep-01 03:48:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 03:48:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 03:48:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 03:48:03 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 03:48:03 LOG5 begin_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2009-Sep-01 03:48:03 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4516602765 -CF 2009-Sep-01 03:48:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:48:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 03:48:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 03:48:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:48:03 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 03:48:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 03:48:03 LOG5 end_task: Level: (4) ID = <10411> Status = 0 0 0 0 ok 2009-Sep-01 03:48:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 03:48:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 03:48:03 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 03:48:03 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 03:48:03 LOG5 begin_task: Level: (4) ID = <10412> Status = 0 0 0 0 ok 2009-Sep-01 03:48:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:48:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 03:48:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 03:48:04 LOG5 end_task: Level: (4) ID = <10412> Status = 0 0 0 0 ok 2009-Sep-01 03:48:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 03:48:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 03:48:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 03:48:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 03:48:04 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 03:48:04 LOG5 begin_task: Level: (4) ID = <10413> Status = 0 0 0 0 ok 2009-Sep-01 03:48:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 03:48:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 03:48:04 LOG5 end_task: Level: (4) ID = <10413> Status = 0 0 0 0 ok 2009-Sep-01 03:48:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 03:48:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 03:48:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 03:48:04 LOG5 end_task: Level: (3) ID = <10410> Status = 0 0 0 0 ok 2009-Sep-01 03:48:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 03:48:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 03:48:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 03:48:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 03:48:04 LOG5 begin_task: Level: (3) ID = <10414> Status = 0 0 0 0 ok 2009-Sep-01 03:48:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 03:48:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 03:48:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 03:48:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 03:48:04 LOG5 end_task: Level: (3) ID = <10414> Status = 0 0 0 0 ok 2009-Sep-01 03:48:04 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 03:48:04 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 03:48:04 LOG5 begin_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2009-Sep-01 03:48:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 03:48:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 03:48:04 INFO2 take_data: Starting WAPP 1-second scan: 924400045 2009-Sep-01 03:48:04 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 03:48:04 LOG5 begin_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2009-Sep-01 03:48:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 03:48:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 03:48:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28085.00 2009-Sep-01 03:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 03:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 03:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 03:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 03:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 03:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 03:48:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 03:48:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 03:48:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 03:48:06 LOG5 end_task: Level: (4) ID = <10416> Status = 0 0 0 0 ok 2009-Sep-01 03:48:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 03:48:06 LOG5 end_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2009-Sep-01 03:48:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 03:48:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 03:48:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 03:48:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 03:48:06 LOG5 begin_task: Level: (3) ID = <10417> Status = 0 0 0 0 ok 2009-Sep-01 03:48:06 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 03:48:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 03:48:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 03:48:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 03:48:06 LOG5 end_task: Level: (3) ID = <10417> Status = 0 0 0 0 ok 2009-Sep-01 03:48:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 03:48:06 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 03:48:06 LOG5 finish_task: Level: (2) ID = <10409> Status = 0 0 0 0 ok 2009-Sep-01 03:48:06 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 03:48:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 03:48:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 03:48:06 LOG5 end_task: Level: (2) ID = <10409> Status = 0 0 0 0 ok 2009-Sep-01 03:48:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 28 of 99 2009-Sep-01 03:48:06 LOG4 send_obs_status: To obs_status: <1> LOOP 28 2009-Sep-01 03:48:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 03:48:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 03:48:06 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 03:48:06 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 03:48:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 03:48:07 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 03:48:07 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 03:48:07 LOG5 begin_task: Level: (2) ID = <10418> Status = 0 0 0 0 ok 2009-Sep-01 03:48:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 03:48:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 03:48:07 INFO2 take_data: Starting WAPP 600-second scan: 924400046 2009-Sep-01 03:48:07 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 03:48:07 LOG5 begin_task: Level: (3) ID = <10419> Status = 0 0 0 0 ok 2009-Sep-01 03:48:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 03:48:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 03:48:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 03:48:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28088.00 2009-Sep-01 03:48:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0022.fits 2009-Sep-01 03:48:07 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0022.fits} 2009-Sep-01 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 03:48:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 03:58:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 03:58:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 03:58:08 LOG5 end_task: Level: (3) ID = <10419> Status = 0 0 0 0 ok 2009-Sep-01 03:58:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 03:58:08 LOG5 end_task: Level: (2) ID = <10418> Status = 0 0 0 0 ok 2009-Sep-01 03:58:08 LOG1 fixed_driftmap: New position: year = 2009.668488351459 RA = 02:13:04.8 RA/Dec = 02:13:36.3 +00:54:03.2 2009-Sep-01 03:58:08 NOTE fixed_driftmap: Correcting ZA to 17:27:10.5 ... 2009-Sep-01 03:58:08 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4529145884 -CF 2009-Sep-01 03:58:08 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 03:58:08 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 03:58:08 LOG5 begin_task: Level: (2) ID = <10420> Status = 0 0 0 0 ok 2009-Sep-01 03:58:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 03:58:08 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 03:58:08 LOG5 begin_task: Level: (3) ID = <10421> Status = 0 0 0 0 ok 2009-Sep-01 03:58:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 03:58:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 03:58:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 03:58:08 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 03:58:08 LOG5 begin_task: Level: (4) ID = <10422> Status = 0 0 0 0 ok 2009-Sep-01 03:58:08 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4529145884 -CF 2009-Sep-01 03:58:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:58:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 03:58:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 03:58:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:58:08 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 03:58:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 03:58:08 LOG5 end_task: Level: (4) ID = <10422> Status = 0 0 0 0 ok 2009-Sep-01 03:58:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 03:58:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 03:58:08 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 03:58:08 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 03:58:08 LOG5 begin_task: Level: (4) ID = <10423> Status = 0 0 0 0 ok 2009-Sep-01 03:58:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 03:58:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 03:58:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 03:58:09 LOG5 end_task: Level: (4) ID = <10423> Status = 0 0 0 0 ok 2009-Sep-01 03:58:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 03:58:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 03:58:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 03:58:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 03:58:09 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 03:58:09 LOG5 begin_task: Level: (4) ID = <10424> Status = 0 0 0 0 ok 2009-Sep-01 03:58:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 03:58:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 03:58:09 LOG5 end_task: Level: (4) ID = <10424> Status = 0 0 0 0 ok 2009-Sep-01 03:58:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 03:58:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 03:58:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 03:58:09 LOG5 end_task: Level: (3) ID = <10421> Status = 0 0 0 0 ok 2009-Sep-01 03:58:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 03:58:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 03:58:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 03:58:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 03:58:09 LOG5 begin_task: Level: (3) ID = <10425> Status = 0 0 0 0 ok 2009-Sep-01 03:58:09 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 03:58:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 03:58:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 03:58:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 03:58:09 LOG5 end_task: Level: (3) ID = <10425> Status = 0 0 0 0 ok 2009-Sep-01 03:58:09 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 03:58:09 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 03:58:09 LOG5 begin_task: Level: (3) ID = <10426> Status = 0 0 0 0 ok 2009-Sep-01 03:58:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 03:58:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 03:58:09 INFO2 take_data: Starting WAPP 1-second scan: 924400047 2009-Sep-01 03:58:09 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 03:58:09 LOG5 begin_task: Level: (4) ID = <10427> Status = 0 0 0 0 ok 2009-Sep-01 03:58:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 03:58:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 03:58:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28690.00 2009-Sep-01 03:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 03:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 03:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 03:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 03:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 03:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 03:58:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 03:58:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 03:58:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 03:58:11 LOG5 end_task: Level: (4) ID = <10427> Status = 0 0 0 0 ok 2009-Sep-01 03:58:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 03:58:11 LOG5 end_task: Level: (3) ID = <10426> Status = 0 0 0 0 ok 2009-Sep-01 03:58:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 03:58:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 03:58:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 03:58:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 03:58:11 LOG5 begin_task: Level: (3) ID = <10428> Status = 0 0 0 0 ok 2009-Sep-01 03:58:11 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 03:58:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 03:58:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 03:58:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 03:58:11 LOG5 end_task: Level: (3) ID = <10428> Status = 0 0 0 0 ok 2009-Sep-01 03:58:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 03:58:11 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 03:58:11 LOG5 finish_task: Level: (2) ID = <10420> Status = 0 0 0 0 ok 2009-Sep-01 03:58:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 03:58:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 03:58:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 03:58:11 LOG5 end_task: Level: (2) ID = <10420> Status = 0 0 0 0 ok 2009-Sep-01 03:58:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 29 of 99 2009-Sep-01 03:58:11 LOG4 send_obs_status: To obs_status: <1> LOOP 29 2009-Sep-01 03:58:11 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 03:58:11 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 03:58:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 03:58:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 03:58:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 03:58:12 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 03:58:12 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 03:58:12 LOG5 begin_task: Level: (2) ID = <10429> Status = 0 0 0 0 ok 2009-Sep-01 03:58:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 03:58:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 03:58:12 INFO2 take_data: Starting WAPP 600-second scan: 924400048 2009-Sep-01 03:58:12 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 03:58:12 LOG5 begin_task: Level: (3) ID = <10430> Status = 0 0 0 0 ok 2009-Sep-01 03:58:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 03:58:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 03:58:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 03:58:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28693.00 2009-Sep-01 03:58:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0023.fits 2009-Sep-01 03:58:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0023.fits} 2009-Sep-01 03:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 03:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 03:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 03:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 03:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 03:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 03:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 03:58:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 04:08:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 04:08:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 04:08:13 LOG5 end_task: Level: (3) ID = <10430> Status = 0 0 0 0 ok 2009-Sep-01 04:08:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 04:08:13 LOG5 end_task: Level: (2) ID = <10429> Status = 0 0 0 0 ok 2009-Sep-01 04:08:13 LOG1 fixed_driftmap: New position: year = 2009.6685075227522 RA = 02:23:11.5 RA/Dec = 02:23:43.0 +00:53:58.4 2009-Sep-01 04:08:13 NOTE fixed_driftmap: Correcting ZA to 17:27:15.3 ... 2009-Sep-01 04:08:13 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4542605724 -CF 2009-Sep-01 04:08:13 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 04:08:13 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 04:08:13 LOG5 begin_task: Level: (2) ID = <10431> Status = 0 0 0 0 ok 2009-Sep-01 04:08:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 04:08:13 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 04:08:13 LOG5 begin_task: Level: (3) ID = <10432> Status = 0 0 0 0 ok 2009-Sep-01 04:08:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 04:08:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 04:08:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:08:13 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 04:08:13 LOG5 begin_task: Level: (4) ID = <10433> Status = 0 0 0 0 ok 2009-Sep-01 04:08:13 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4542605724 -CF 2009-Sep-01 04:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:08:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 04:08:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:08:13 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 04:08:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 04:08:13 LOG5 end_task: Level: (4) ID = <10433> Status = 0 0 0 0 ok 2009-Sep-01 04:08:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 04:08:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 04:08:13 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 04:08:13 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 04:08:13 LOG5 begin_task: Level: (4) ID = <10434> Status = 0 0 0 0 ok 2009-Sep-01 04:08:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:08:14 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 04:08:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 04:08:14 LOG5 end_task: Level: (4) ID = <10434> Status = 0 0 0 0 ok 2009-Sep-01 04:08:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 04:08:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 04:08:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 04:08:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 04:08:14 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 04:08:14 LOG5 begin_task: Level: (4) ID = <10435> Status = 0 0 0 0 ok 2009-Sep-01 04:08:14 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 04:08:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 04:08:14 LOG5 end_task: Level: (4) ID = <10435> Status = 0 0 0 0 ok 2009-Sep-01 04:08:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 04:08:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 04:08:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 04:08:14 LOG5 end_task: Level: (3) ID = <10432> Status = 0 0 0 0 ok 2009-Sep-01 04:08:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 04:08:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 04:08:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 04:08:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 04:08:14 LOG5 begin_task: Level: (3) ID = <10436> Status = 0 0 0 0 ok 2009-Sep-01 04:08:14 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 04:08:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 04:08:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 04:08:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 04:08:14 LOG5 end_task: Level: (3) ID = <10436> Status = 0 0 0 0 ok 2009-Sep-01 04:08:14 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 04:08:14 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 04:08:14 LOG5 begin_task: Level: (3) ID = <10437> Status = 0 0 0 0 ok 2009-Sep-01 04:08:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 04:08:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 04:08:14 INFO2 take_data: Starting WAPP 1-second scan: 924400049 2009-Sep-01 04:08:14 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 04:08:14 LOG5 begin_task: Level: (4) ID = <10438> Status = 0 0 0 0 ok 2009-Sep-01 04:08:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 04:08:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 04:08:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29295.00 2009-Sep-01 04:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 04:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 04:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 04:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 04:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 04:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 04:08:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 04:08:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 04:08:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 04:08:16 LOG5 end_task: Level: (4) ID = <10438> Status = 0 0 0 0 ok 2009-Sep-01 04:08:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 04:08:16 LOG5 end_task: Level: (3) ID = <10437> Status = 0 0 0 0 ok 2009-Sep-01 04:08:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 04:08:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 04:08:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 04:08:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 04:08:16 LOG5 begin_task: Level: (3) ID = <10439> Status = 0 0 0 0 ok 2009-Sep-01 04:08:17 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 04:08:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 04:08:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 04:08:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 04:08:17 LOG5 end_task: Level: (3) ID = <10439> Status = 0 0 0 0 ok 2009-Sep-01 04:08:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 04:08:17 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 04:08:17 LOG5 finish_task: Level: (2) ID = <10431> Status = 0 0 0 0 ok 2009-Sep-01 04:08:17 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 04:08:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 04:08:17 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 04:08:17 LOG5 end_task: Level: (2) ID = <10431> Status = 0 0 0 0 ok 2009-Sep-01 04:08:17 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 30 of 99 2009-Sep-01 04:08:17 LOG4 send_obs_status: To obs_status: <1> LOOP 30 2009-Sep-01 04:08:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 04:08:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 04:08:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 04:08:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 04:08:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 04:08:17 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 04:08:17 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 04:08:17 LOG5 begin_task: Level: (2) ID = <10440> Status = 0 0 0 0 ok 2009-Sep-01 04:08:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 04:08:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 04:08:17 INFO2 take_data: Starting WAPP 600-second scan: 924400050 2009-Sep-01 04:08:17 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 04:08:17 LOG5 begin_task: Level: (3) ID = <10441> Status = 0 0 0 0 ok 2009-Sep-01 04:08:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 04:08:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 04:08:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 04:08:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29298.00 2009-Sep-01 04:08:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0024.fits 2009-Sep-01 04:08:17 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0024.fits} 2009-Sep-01 04:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 04:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 04:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 04:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 04:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 04:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 04:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 04:18:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 04:18:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 04:18:18 LOG5 end_task: Level: (3) ID = <10441> Status = 0 0 0 0 ok 2009-Sep-01 04:18:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 04:18:18 LOG5 end_task: Level: (2) ID = <10440> Status = 0 0 0 0 ok 2009-Sep-01 04:18:18 LOG1 fixed_driftmap: New position: year = 2009.6685266940451 RA = 02:33:18.2 RA/Dec = 02:33:49.6 +00:53:53.2 2009-Sep-01 04:18:18 NOTE fixed_driftmap: Correcting ZA to 17:27:20.5 ... 2009-Sep-01 04:18:18 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4556956248 -CF 2009-Sep-01 04:18:18 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 04:18:18 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 04:18:18 LOG5 begin_task: Level: (2) ID = <10442> Status = 0 0 0 0 ok 2009-Sep-01 04:18:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 04:18:18 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 04:18:18 LOG5 begin_task: Level: (3) ID = <10443> Status = 0 0 0 0 ok 2009-Sep-01 04:18:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 04:18:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 04:18:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:18:18 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 04:18:18 LOG5 begin_task: Level: (4) ID = <10444> Status = 0 0 0 0 ok 2009-Sep-01 04:18:18 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4556956248 -CF 2009-Sep-01 04:18:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:18:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 04:18:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:18:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:18:19 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 04:18:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 04:18:19 LOG5 end_task: Level: (4) ID = <10444> Status = 0 0 0 0 ok 2009-Sep-01 04:18:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 04:18:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 04:18:19 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 04:18:19 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 04:18:19 LOG5 begin_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2009-Sep-01 04:18:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:18:19 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 04:18:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 04:18:19 LOG5 end_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2009-Sep-01 04:18:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 04:18:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 04:18:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 04:18:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 04:18:19 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 04:18:19 LOG5 begin_task: Level: (4) ID = <10446> Status = 0 0 0 0 ok 2009-Sep-01 04:18:19 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 04:18:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 04:18:19 LOG5 end_task: Level: (4) ID = <10446> Status = 0 0 0 0 ok 2009-Sep-01 04:18:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 04:18:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 04:18:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 04:18:19 LOG5 end_task: Level: (3) ID = <10443> Status = 0 0 0 0 ok 2009-Sep-01 04:18:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 04:18:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 04:18:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 04:18:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 04:18:19 LOG5 begin_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2009-Sep-01 04:18:19 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 04:18:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 04:18:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 04:18:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 04:18:19 LOG5 end_task: Level: (3) ID = <10447> Status = 0 0 0 0 ok 2009-Sep-01 04:18:19 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 04:18:19 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 04:18:19 LOG5 begin_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2009-Sep-01 04:18:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 04:18:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 04:18:19 INFO2 take_data: Starting WAPP 1-second scan: 924400051 2009-Sep-01 04:18:19 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 04:18:19 LOG5 begin_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2009-Sep-01 04:18:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 04:18:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 04:18:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29900.00 2009-Sep-01 04:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 04:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 04:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 04:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 04:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 04:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 04:18:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 04:18:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 04:18:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 04:18:21 LOG5 end_task: Level: (4) ID = <10449> Status = 0 0 0 0 ok 2009-Sep-01 04:18:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 04:18:21 LOG5 end_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2009-Sep-01 04:18:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 04:18:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 04:18:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 04:18:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 04:18:21 LOG5 begin_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2009-Sep-01 04:18:21 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 04:18:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 04:18:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 04:18:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 04:18:21 LOG5 end_task: Level: (3) ID = <10450> Status = 0 0 0 0 ok 2009-Sep-01 04:18:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 04:18:21 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 04:18:21 LOG5 finish_task: Level: (2) ID = <10442> Status = 0 0 0 0 ok 2009-Sep-01 04:18:21 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 04:18:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 04:18:21 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 04:18:21 LOG5 end_task: Level: (2) ID = <10442> Status = 0 0 0 0 ok 2009-Sep-01 04:18:22 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 31 of 99 2009-Sep-01 04:18:22 LOG4 send_obs_status: To obs_status: <1> LOOP 31 2009-Sep-01 04:18:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 04:18:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 04:18:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 04:18:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 04:18:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 04:18:22 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 04:18:22 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 04:18:22 LOG5 begin_task: Level: (2) ID = <10451> Status = 0 0 0 0 ok 2009-Sep-01 04:18:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 04:18:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 04:18:22 INFO2 take_data: Starting WAPP 600-second scan: 924400052 2009-Sep-01 04:18:22 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 04:18:22 LOG5 begin_task: Level: (3) ID = <10452> Status = 0 0 0 0 ok 2009-Sep-01 04:18:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 04:18:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 04:18:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 04:18:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 29903.00 2009-Sep-01 04:18:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0025.fits 2009-Sep-01 04:18:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0025.fits} 2009-Sep-01 04:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 04:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 04:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 04:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 04:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 04:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 04:18:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 04:28:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 04:28:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 04:28:23 LOG5 end_task: Level: (3) ID = <10452> Status = 0 0 0 0 ok 2009-Sep-01 04:28:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 04:28:23 LOG5 end_task: Level: (2) ID = <10451> Status = 0 0 0 0 ok 2009-Sep-01 04:28:23 LOG1 fixed_driftmap: New position: year = 2009.6685458653383 RA = 02:43:24.9 RA/Dec = 02:43:56.3 +00:53:47.7 2009-Sep-01 04:28:23 NOTE fixed_driftmap: Correcting ZA to 17:27:26.0 ... 2009-Sep-01 04:28:23 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4572169545 -CF 2009-Sep-01 04:28:23 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 04:28:23 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 04:28:23 LOG5 begin_task: Level: (2) ID = <10453> Status = 0 0 0 0 ok 2009-Sep-01 04:28:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 04:28:23 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 04:28:23 LOG5 begin_task: Level: (3) ID = <10454> Status = 0 0 0 0 ok 2009-Sep-01 04:28:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 04:28:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 04:28:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:28:23 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 04:28:23 LOG5 begin_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2009-Sep-01 04:28:23 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4572169545 -CF 2009-Sep-01 04:28:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:28:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 04:28:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:28:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:28:23 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 04:28:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 04:28:23 LOG5 end_task: Level: (4) ID = <10455> Status = 0 0 0 0 ok 2009-Sep-01 04:28:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 04:28:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 04:28:23 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 04:28:23 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 04:28:23 LOG5 begin_task: Level: (4) ID = <10456> Status = 0 0 0 0 ok 2009-Sep-01 04:28:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:28:24 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 04:28:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 04:28:24 LOG5 end_task: Level: (4) ID = <10456> Status = 0 0 0 0 ok 2009-Sep-01 04:28:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 04:28:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 04:28:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 04:28:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 04:28:24 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 04:28:24 LOG5 begin_task: Level: (4) ID = <10457> Status = 0 0 0 0 ok 2009-Sep-01 04:28:24 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 04:28:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 04:28:24 LOG5 end_task: Level: (4) ID = <10457> Status = 0 0 0 0 ok 2009-Sep-01 04:28:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 04:28:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 04:28:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 04:28:24 LOG5 end_task: Level: (3) ID = <10454> Status = 0 0 0 0 ok 2009-Sep-01 04:28:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 04:28:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 04:28:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 04:28:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 04:28:24 LOG5 begin_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2009-Sep-01 04:28:24 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 04:28:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 04:28:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 04:28:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 04:28:24 LOG5 end_task: Level: (3) ID = <10458> Status = 0 0 0 0 ok 2009-Sep-01 04:28:24 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 04:28:24 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 04:28:24 LOG5 begin_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2009-Sep-01 04:28:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 04:28:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 04:28:24 INFO2 take_data: Starting WAPP 1-second scan: 924400053 2009-Sep-01 04:28:24 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 04:28:24 LOG5 begin_task: Level: (4) ID = <10460> Status = 0 0 0 0 ok 2009-Sep-01 04:28:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 04:28:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 04:28:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30505.00 2009-Sep-01 04:28:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 04:28:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:28:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:28:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 04:28:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 04:28:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 04:28:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 04:28:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 04:28:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 04:28:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 04:28:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 04:28:26 LOG5 end_task: Level: (4) ID = <10460> Status = 0 0 0 0 ok 2009-Sep-01 04:28:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 04:28:26 LOG5 end_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2009-Sep-01 04:28:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 04:28:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 04:28:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 04:28:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 04:28:26 LOG5 begin_task: Level: (3) ID = <10461> Status = 0 0 0 0 ok 2009-Sep-01 04:28:27 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 04:28:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 04:28:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 04:28:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 04:28:27 LOG5 end_task: Level: (3) ID = <10461> Status = 0 0 0 0 ok 2009-Sep-01 04:28:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 04:28:27 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 04:28:27 LOG5 finish_task: Level: (2) ID = <10453> Status = 0 0 0 0 ok 2009-Sep-01 04:28:27 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 04:28:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 04:28:27 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 04:28:27 LOG5 end_task: Level: (2) ID = <10453> Status = 0 0 0 0 ok 2009-Sep-01 04:28:27 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 32 of 99 2009-Sep-01 04:28:27 LOG4 send_obs_status: To obs_status: <1> LOOP 32 2009-Sep-01 04:28:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 04:28:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 04:28:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 04:28:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 04:28:27 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 04:28:27 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 04:28:27 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 04:28:27 LOG5 begin_task: Level: (2) ID = <10462> Status = 0 0 0 0 ok 2009-Sep-01 04:28:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 04:28:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 04:28:27 INFO2 take_data: Starting WAPP 600-second scan: 924400054 2009-Sep-01 04:28:27 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 04:28:27 LOG5 begin_task: Level: (3) ID = <10463> Status = 0 0 0 0 ok 2009-Sep-01 04:28:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 04:28:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 04:28:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 04:28:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 30508.00 2009-Sep-01 04:28:27 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0026.fits 2009-Sep-01 04:28:27 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0026.fits} 2009-Sep-01 04:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 04:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 04:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 04:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 04:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 04:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 04:28:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 04:38:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 04:38:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 04:38:28 LOG5 end_task: Level: (3) ID = <10463> Status = 0 0 0 0 ok 2009-Sep-01 04:38:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 04:38:28 LOG5 end_task: Level: (2) ID = <10462> Status = 0 0 0 0 ok 2009-Sep-01 04:38:28 LOG1 fixed_driftmap: New position: year = 2009.6685650366314 RA = 02:53:31.6 RA/Dec = 02:54:02.9 +00:53:41.9 2009-Sep-01 04:38:28 NOTE fixed_driftmap: Correcting ZA to 17:27:31.8 ... 2009-Sep-01 04:38:28 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4588215927 -CF 2009-Sep-01 04:38:28 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 04:38:28 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 04:38:28 LOG5 begin_task: Level: (2) ID = <10464> Status = 0 0 0 0 ok 2009-Sep-01 04:38:28 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 04:38:28 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 04:38:28 LOG5 begin_task: Level: (3) ID = <10465> Status = 0 0 0 0 ok 2009-Sep-01 04:38:28 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 04:38:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 04:38:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:38:28 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 04:38:28 LOG5 begin_task: Level: (4) ID = <10466> Status = 0 0 0 0 ok 2009-Sep-01 04:38:28 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4588215927 -CF 2009-Sep-01 04:38:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:38:28 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 04:38:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:38:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:38:29 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 04:38:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 04:38:29 LOG5 end_task: Level: (4) ID = <10466> Status = 0 0 0 0 ok 2009-Sep-01 04:38:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 04:38:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 04:38:29 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 04:38:29 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 04:38:29 LOG5 begin_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2009-Sep-01 04:38:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:38:29 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 04:38:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 04:38:29 LOG5 end_task: Level: (4) ID = <10467> Status = 0 0 0 0 ok 2009-Sep-01 04:38:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 04:38:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 04:38:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 04:38:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 04:38:29 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 04:38:29 LOG5 begin_task: Level: (4) ID = <10468> Status = 0 0 0 0 ok 2009-Sep-01 04:38:29 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 04:38:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 04:38:29 LOG5 end_task: Level: (4) ID = <10468> Status = 0 0 0 0 ok 2009-Sep-01 04:38:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 04:38:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 04:38:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 04:38:29 LOG5 end_task: Level: (3) ID = <10465> Status = 0 0 0 0 ok 2009-Sep-01 04:38:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 04:38:29 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 04:38:29 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 04:38:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 04:38:29 LOG5 begin_task: Level: (3) ID = <10469> Status = 0 0 0 0 ok 2009-Sep-01 04:38:29 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 04:38:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 04:38:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 04:38:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 04:38:29 LOG5 end_task: Level: (3) ID = <10469> Status = 0 0 0 0 ok 2009-Sep-01 04:38:29 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 04:38:29 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 04:38:29 LOG5 begin_task: Level: (3) ID = <10470> Status = 0 0 0 0 ok 2009-Sep-01 04:38:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 04:38:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 04:38:29 INFO2 take_data: Starting WAPP 1-second scan: 924400055 2009-Sep-01 04:38:30 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 04:38:30 LOG5 begin_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2009-Sep-01 04:38:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 04:38:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 04:38:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31111.00 2009-Sep-01 04:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 04:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 04:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 04:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 04:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 04:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 04:38:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 04:38:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 04:38:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 04:38:32 LOG5 end_task: Level: (4) ID = <10471> Status = 0 0 0 0 ok 2009-Sep-01 04:38:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 04:38:32 LOG5 end_task: Level: (3) ID = <10470> Status = 0 0 0 0 ok 2009-Sep-01 04:38:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 04:38:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 04:38:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 04:38:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 04:38:32 LOG5 begin_task: Level: (3) ID = <10472> Status = 0 0 0 0 ok 2009-Sep-01 04:38:32 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 04:38:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 04:38:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 04:38:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 04:38:32 LOG5 end_task: Level: (3) ID = <10472> Status = 0 0 0 0 ok 2009-Sep-01 04:38:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 04:38:32 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 04:38:32 LOG5 finish_task: Level: (2) ID = <10464> Status = 0 0 0 0 ok 2009-Sep-01 04:38:32 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 04:38:32 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 04:38:32 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 04:38:32 LOG5 end_task: Level: (2) ID = <10464> Status = 0 0 0 0 ok 2009-Sep-01 04:38:32 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 33 of 99 2009-Sep-01 04:38:32 LOG4 send_obs_status: To obs_status: <1> LOOP 33 2009-Sep-01 04:38:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 04:38:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 04:38:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 04:38:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 04:38:33 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 04:38:33 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 04:38:33 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 04:38:33 LOG5 begin_task: Level: (2) ID = <10473> Status = 0 0 0 0 ok 2009-Sep-01 04:38:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 04:38:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 04:38:33 INFO2 take_data: Starting WAPP 600-second scan: 924400056 2009-Sep-01 04:38:33 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 04:38:33 LOG5 begin_task: Level: (3) ID = <10474> Status = 0 0 0 0 ok 2009-Sep-01 04:38:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 04:38:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 04:38:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 04:38:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31114.00 2009-Sep-01 04:38:33 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0027.fits 2009-Sep-01 04:38:33 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0027.fits} 2009-Sep-01 04:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 04:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 04:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 04:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 04:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 04:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 04:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 04:48:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 04:48:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 04:48:34 LOG5 end_task: Level: (3) ID = <10474> Status = 0 0 0 0 ok 2009-Sep-01 04:48:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 04:48:34 LOG5 end_task: Level: (2) ID = <10473> Status = 0 0 0 0 ok 2009-Sep-01 04:48:34 LOG1 fixed_driftmap: New position: year = 2009.6685842396128 RA = 03:03:39.3 RA/Dec = 03:04:10.6 +00:53:35.9 2009-Sep-01 04:48:34 NOTE fixed_driftmap: Correcting ZA to 17:27:37.8 ... 2009-Sep-01 04:48:34 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4605092708 -CF 2009-Sep-01 04:48:34 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 04:48:34 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 04:48:34 LOG5 begin_task: Level: (2) ID = <10475> Status = 0 0 0 0 ok 2009-Sep-01 04:48:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 04:48:34 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 04:48:34 LOG5 begin_task: Level: (3) ID = <10476> Status = 0 0 0 0 ok 2009-Sep-01 04:48:34 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 04:48:34 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 04:48:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:48:34 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 04:48:34 LOG5 begin_task: Level: (4) ID = <10477> Status = 0 0 0 0 ok 2009-Sep-01 04:48:34 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4605092708 -CF 2009-Sep-01 04:48:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:48:34 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 04:48:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:48:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:48:34 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 04:48:34 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 04:48:34 LOG5 end_task: Level: (4) ID = <10477> Status = 0 0 0 0 ok 2009-Sep-01 04:48:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 04:48:34 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 04:48:34 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 04:48:34 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 04:48:34 LOG5 begin_task: Level: (4) ID = <10478> Status = 0 0 0 0 ok 2009-Sep-01 04:48:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:48:35 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 04:48:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 04:48:35 LOG5 end_task: Level: (4) ID = <10478> Status = 0 0 0 0 ok 2009-Sep-01 04:48:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 04:48:35 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 04:48:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 04:48:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 04:48:35 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 04:48:35 LOG5 begin_task: Level: (4) ID = <10479> Status = 0 0 0 0 ok 2009-Sep-01 04:48:35 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 04:48:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 04:48:35 LOG5 end_task: Level: (4) ID = <10479> Status = 0 0 0 0 ok 2009-Sep-01 04:48:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 04:48:35 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 04:48:35 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 04:48:35 LOG5 end_task: Level: (3) ID = <10476> Status = 0 0 0 0 ok 2009-Sep-01 04:48:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 04:48:35 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 04:48:35 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 04:48:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 04:48:35 LOG5 begin_task: Level: (3) ID = <10480> Status = 0 0 0 0 ok 2009-Sep-01 04:48:35 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 04:48:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 04:48:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 04:48:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 04:48:35 LOG5 end_task: Level: (3) ID = <10480> Status = 0 0 0 0 ok 2009-Sep-01 04:48:35 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 04:48:35 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 04:48:35 LOG5 begin_task: Level: (3) ID = <10481> Status = 0 0 0 0 ok 2009-Sep-01 04:48:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 04:48:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 04:48:35 INFO2 take_data: Starting WAPP 1-second scan: 924400057 2009-Sep-01 04:48:35 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 04:48:35 LOG5 begin_task: Level: (4) ID = <10482> Status = 0 0 0 0 ok 2009-Sep-01 04:48:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 04:48:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 04:48:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31716.00 2009-Sep-01 04:48:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 04:48:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:48:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:48:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 04:48:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 04:48:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 04:48:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 04:48:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 04:48:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 04:48:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 04:48:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 04:48:37 LOG5 end_task: Level: (4) ID = <10482> Status = 0 0 0 0 ok 2009-Sep-01 04:48:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 04:48:37 LOG5 end_task: Level: (3) ID = <10481> Status = 0 0 0 0 ok 2009-Sep-01 04:48:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 04:48:37 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 04:48:37 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 04:48:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 04:48:37 LOG5 begin_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2009-Sep-01 04:48:37 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 04:48:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 04:48:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 04:48:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 04:48:37 LOG5 end_task: Level: (3) ID = <10483> Status = 0 0 0 0 ok 2009-Sep-01 04:48:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 04:48:37 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 04:48:37 LOG5 finish_task: Level: (2) ID = <10475> Status = 0 0 0 0 ok 2009-Sep-01 04:48:37 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 04:48:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 04:48:37 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 04:48:37 LOG5 end_task: Level: (2) ID = <10475> Status = 0 0 0 0 ok 2009-Sep-01 04:48:37 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 34 of 99 2009-Sep-01 04:48:37 LOG4 send_obs_status: To obs_status: <1> LOOP 34 2009-Sep-01 04:48:37 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 04:48:37 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 04:48:37 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 04:48:37 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 04:48:38 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 04:48:38 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 04:48:38 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 04:48:38 LOG5 begin_task: Level: (2) ID = <10484> Status = 0 0 0 0 ok 2009-Sep-01 04:48:38 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 04:48:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 04:48:38 INFO2 take_data: Starting WAPP 600-second scan: 924400058 2009-Sep-01 04:48:38 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 04:48:38 LOG5 begin_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2009-Sep-01 04:48:38 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 04:48:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 04:48:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 04:48:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 31719.00 2009-Sep-01 04:48:38 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0028.fits 2009-Sep-01 04:48:38 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0028.fits} 2009-Sep-01 04:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 04:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 04:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 04:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 04:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 04:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 04:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 04:58:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 04:58:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 04:58:39 LOG5 end_task: Level: (3) ID = <10485> Status = 0 0 0 0 ok 2009-Sep-01 04:58:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 04:58:39 LOG5 end_task: Level: (2) ID = <10484> Status = 0 0 0 0 ok 2009-Sep-01 04:58:39 LOG1 fixed_driftmap: New position: year = 2009.6686034109059 RA = 03:13:46.0 RA/Dec = 03:14:17.3 +00:53:29.5 2009-Sep-01 04:58:39 NOTE fixed_driftmap: Correcting ZA to 17:27:44.2 ... 2009-Sep-01 04:58:39 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 17.4622711269 -CF 2009-Sep-01 04:58:39 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Sep-01 04:58:39 START begin_task: Starting task 'WAPP calibration' 2009-Sep-01 04:58:39 LOG5 begin_task: Level: (2) ID = <10486> Status = 0 0 0 0 ok 2009-Sep-01 04:58:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Sep-01 04:58:39 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 04:58:39 LOG5 begin_task: Level: (3) ID = <10487> Status = 0 0 0 0 ok 2009-Sep-01 04:58:39 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 04:58:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 04:58:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:58:39 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 04:58:39 LOG5 begin_task: Level: (4) ID = <10488> Status = 0 0 0 0 ok 2009-Sep-01 04:58:39 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 17.4622711269 -CF 2009-Sep-01 04:58:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:58:39 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 04:58:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:58:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:58:39 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 04:58:39 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 04:58:39 LOG5 end_task: Level: (4) ID = <10488> Status = 0 0 0 0 ok 2009-Sep-01 04:58:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 04:58:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 04:58:39 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 04:58:39 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 04:58:39 LOG5 begin_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2009-Sep-01 04:58:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:58:40 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 04:58:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 04:58:40 LOG5 end_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2009-Sep-01 04:58:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 04:58:40 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 04:58:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 04:58:40 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 04:58:40 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 04:58:40 LOG5 begin_task: Level: (4) ID = <10490> Status = 0 0 0 0 ok 2009-Sep-01 04:58:40 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 04:58:40 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 04:58:40 LOG5 end_task: Level: (4) ID = <10490> Status = 0 0 0 0 ok 2009-Sep-01 04:58:40 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 04:58:40 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 04:58:40 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 04:58:40 LOG5 end_task: Level: (3) ID = <10487> Status = 0 0 0 0 ok 2009-Sep-01 04:58:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Sep-01 04:58:40 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 04:58:40 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 04:58:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 04:58:40 LOG5 begin_task: Level: (3) ID = <10491> Status = 0 0 0 0 ok 2009-Sep-01 04:58:40 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 04:58:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 04:58:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 04:58:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 04:58:40 LOG5 end_task: Level: (3) ID = <10491> Status = 0 0 0 0 ok 2009-Sep-01 04:58:40 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Sep-01 04:58:40 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 04:58:40 LOG5 begin_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2009-Sep-01 04:58:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Sep-01 04:58:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 04:58:40 INFO2 take_data: Starting WAPP 1-second scan: 924400059 2009-Sep-01 04:58:40 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 04:58:40 LOG5 begin_task: Level: (4) ID = <10493> Status = 0 0 0 0 ok 2009-Sep-01 04:58:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 04:58:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Sep-01 04:58:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32321.00 2009-Sep-01 04:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 04:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 04:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 04:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 04:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 04:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 04:58:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 04:58:42 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 04:58:42 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Sep-01 04:58:42 LOG5 end_task: Level: (4) ID = <10493> Status = 0 0 0 0 ok 2009-Sep-01 04:58:42 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Sep-01 04:58:42 LOG5 end_task: Level: (3) ID = <10492> Status = 0 0 0 0 ok 2009-Sep-01 04:58:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 04:58:42 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 04:58:42 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 04:58:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 04:58:42 LOG5 begin_task: Level: (3) ID = <10494> Status = 0 0 0 0 ok 2009-Sep-01 04:58:43 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 04:58:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 04:58:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 04:58:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 04:58:43 LOG5 end_task: Level: (3) ID = <10494> Status = 0 0 0 0 ok 2009-Sep-01 04:58:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 04:58:43 STOP finish_task: Finishing task 'WAPP calibration' 2009-Sep-01 04:58:43 LOG5 finish_task: Level: (2) ID = <10486> Status = 0 0 0 0 ok 2009-Sep-01 04:58:43 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Sep-01 04:58:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 04:58:43 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Sep-01 04:58:43 LOG5 end_task: Level: (2) ID = <10486> Status = 0 0 0 0 ok 2009-Sep-01 04:58:43 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 35 of 99 2009-Sep-01 04:58:43 LOG4 send_obs_status: To obs_status: <1> LOOP 35 2009-Sep-01 04:58:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 04:58:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 04:58:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 04:58:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 04:58:43 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Sep-01 04:58:43 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Sep-01 04:58:43 START begin_task: Starting task 'WAPP spectral observation' 2009-Sep-01 04:58:43 LOG5 begin_task: Level: (2) ID = <10495> Status = 0 0 0 0 ok 2009-Sep-01 04:58:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Sep-01 04:58:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Sep-01 04:58:43 INFO2 take_data: Starting WAPP 600-second scan: 924400060 2009-Sep-01 04:58:43 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Sep-01 04:58:43 LOG5 begin_task: Level: (3) ID = <10496> Status = 0 0 0 0 ok 2009-Sep-01 04:58:43 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 04:58:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 04:58:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Sep-01 04:58:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32324.00 2009-Sep-01 04:58:43 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0029.fits 2009-Sep-01 04:58:44 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0029.fits} 2009-Sep-01 04:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 04:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 04:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 04:58:45 LOG3 WAPP=1+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 04:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 04:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 04:58:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 04:58:45 LOG3 WAPP=2-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 04:58:51 COMMAND CIMA-send_to_exec: Sending command to abort observation 2009-Sep-01 04:58:51 LOG4 exec_msg: From OBSERVER: abort_task abort 2009-Sep-01 04:58:51 WARNING abort_task: WARNING abort requested! 2009-Sep-01 04:58:51 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2009-Sep-01 04:58:51 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2009-Sep-01 04:58:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2009-Sep-01 04:58:51 LOG5 end_task: Level: (3) ID = <10496> Status = 1 0 0 0 abort 2009-Sep-01 04:58:51 LOG4 stop_backends: Calling 'stop_backends' 2009-Sep-01 04:58:51 START begin_task: Starting task 'stopping the WAPPs' 2009-Sep-01 04:58:51 LOG5 begin_task: Level: (3) ID = <10497> Status = 1 0 0 0 abort 2009-Sep-01 04:58:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2009-Sep-01 04:58:51 INFO1 stop_wapp: Stopping the WAPPs 2009-Sep-01 04:58:51 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2009-Sep-01 04:58:51 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2009-Sep-01 04:58:51 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2009-Sep-01 04:58:51 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2009-Sep-01 04:58:51 START begin_task: Starting task 'waiting on stopping WAPPs' 2009-Sep-01 04:58:51 LOG5 begin_task: Level: (4) ID = <10498> Status = 1 0 0 0 abort 2009-Sep-01 04:58:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2009-Sep-01 04:58:52 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2009-Sep-01 04:58:53 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2009-Sep-01 04:58:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 04:58:53 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2009-Sep-01 04:58:53 LOG5 end_task: Level: (4) ID = <10498> Status = 1 0 0 0 abort 2009-Sep-01 04:58:53 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2009-Sep-01 04:58:53 LOG5 end_task: Level: (3) ID = <10497> Status = 1 0 0 0 abort 2009-Sep-01 04:58:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2009-Sep-01 04:58:53 LOG5 end_task: Level: (2) ID = <10495> Status = 1 0 0 0 abort 2009-Sep-01 04:58:53 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Sep-01 04:58:53 LOG5 finish_task: Level: (1) ID = <10105> Status = 1 0 0 0 abort 2009-Sep-01 04:58:53 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2009-Sep-01 04:58:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-Sep-01 04:58:53 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2009-Sep-01 04:58:53 LOG5 end_task: Level: (1) ID = <10105> Status = 1 0 0 0 abort 2009-Sep-01 04:58:59 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Sep-01 04:58:59 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Sep-01 04:58:59 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Sep-01 04:58:59 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Sep-01 04:58:59 LOG5 begin_task: Level: (1) ID = <10499> Status = 0 0 0 0 ok 2009-Sep-01 04:58:59 NOTE restart_wapp: Restarting all WAPPs 2009-Sep-01 04:58:59 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Sep-01 04:58:59 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Sep-01 04:58:59 LOG5 end_task: Level: (1) ID = <10499> Status = 0 0 0 0 ok 2009-Sep-01 04:58:59 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Sep-01 04:58:59 LOG3 exec_msg: Closing socket 2009-Sep-01 04:58:59 LOG3 exec_msg: Closing socket 2009-Sep-01 04:58:59 LOG3 exec_msg: Closing socket 2009-Sep-01 04:58:59 LOG3 exec_msg: Closing socket 2009-Sep-01 04:59:02 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Sep-01 04:59:02 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Sep-01 04:59:02 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Sep-01 04:59:02 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Sep-01 04:59:09 INFO4 CIMA-load_command_file: Loaded command file 'command_galfacurpos09.cmd' 2009-Sep-01 04:59:13 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos09.cmd' to executive ... 2009-Sep-01 04:59:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_09.conf} 2009-Sep-01 04:59:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {TRACKCURPOS} 2009-Sep-01 04:59:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {ALFAANGLE 19} 2009-Sep-01 04:59:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Sep-01 04:59:13 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Sep-01 04:59:13 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos09.cmd 1 1 4 2009-Sep-01 04:59:13 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos09.cmd 1 1 4' 2009-Sep-01 04:59:13 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos09.cmd'' 2009-Sep-01 04:59:13 LOG5 begin_task: Level: (1) ID = <10500> Status = 0 0 0 0 ok 2009-Sep-01 04:59:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos09.cmd' ...} 2009-Sep-01 04:59:13 NOTE run_command_file: Starting execution of command file 'command_galfacurpos09.cmd' from line 1 2009-Sep-01 04:59:13 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_09.conf' 2009-Sep-01 04:59:13 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Sep-01 04:59:13 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Sep-01 04:59:13 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Sep-01 04:59:13 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Sep-01 04:59:14 LOG2 CIMA-antvel: Precessing RA = 21:29:00.0 Dec = +00:51:06.0 Epoch = 2009.66860 J 2009-Sep-01 04:59:14 LOG2 CIMA-antvel: Computed apparent RA = 21:29:31.8 Dec = +00:53:49.1 2009-Sep-01 04:59:14 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 32353 2009 244 0.0 2009-Sep-01 04:59:14 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Sep-01 04:59:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Sep-01 04:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Sep-01 04:59:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Sep-01 04:59:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Sep-01 04:59:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Sep-01 04:59:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Sep-01 04:59:16 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Sep-01 04:59:16 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Sep-01 04:59:16 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Sep-01 04:59:16 LOG5 begin_task: Level: (2) ID = <10501> Status = 0 0 0 0 ok 2009-Sep-01 04:59:16 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Sep-01 04:59:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Sep-01 04:59:16 LOG1 config_iflo: Receiver ALFA already selected 2009-Sep-01 04:59:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 04:59:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 04:59:16 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 04:59:16 LOG5 begin_task: Level: (3) ID = <10502> Status = 0 0 0 0 ok 2009-Sep-01 04:59:16 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 04:59:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 04:59:16 LOG5 end_task: Level: (3) ID = <10502> Status = 0 0 0 0 ok 2009-Sep-01 04:59:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 04:59:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 04:59:16 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Sep-01 04:59:16 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Sep-01 04:59:16 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Sep-01 04:59:16 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Sep-01 04:59:16 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Sep-01 04:59:16 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Sep-01 04:59:16 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Sep-01 04:59:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Sep-01 04:59:16 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Sep-01 04:59:16 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Sep-01 04:59:16 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Sep-01 04:59:16 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Sep-01 04:59:16 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Sep-01 04:59:16 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Sep-01 04:59:16 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Sep-01 04:59:16 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Sep-01 04:59:16 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Sep-01 04:59:16 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Sep-01 04:59:16 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Sep-01 04:59:16 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Sep-01 04:59:16 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Sep-01 04:59:16 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Sep-01 04:59:16 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Sep-01 04:59:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 04:59:16 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Sep-01 04:59:16 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Sep-01 04:59:16 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Sep-01 04:59:16 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Sep-01 04:59:16 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Sep-01 04:59:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Sep-01 04:59:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:59:16 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Sep-01 04:59:16 LOG5 begin_task: Level: (3) ID = <10503> Status = 0 0 0 0 ok 2009-Sep-01 04:59:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Sep-01 04:59:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Sep-01 04:59:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 04:59:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:59:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:59:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:59:16 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Sep-01 04:59:16 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Sep-01 04:59:16 LOG5 end_task: Level: (3) ID = <10503> Status = 0 0 0 0 ok 2009-Sep-01 04:59:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Sep-01 04:59:16 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Sep-01 04:59:16 LOG5 finish_task: Level: (2) ID = <10501> Status = 0 0 0 0 ok 2009-Sep-01 04:59:16 DONE finish_task: DONE finished configuration: IF/LO path 2009-Sep-01 04:59:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Sep-01 04:59:16 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Sep-01 04:59:16 LOG5 end_task: Level: (2) ID = <10501> Status = 0 0 0 0 ok 2009-Sep-01 04:59:16 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Sep-01 04:59:16 LOG5 begin_task: Level: (2) ID = <10504> Status = 0 0 0 0 ok 2009-Sep-01 04:59:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Sep-01 04:59:17 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Sep-01 04:59:17 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Sep-01 04:59:17 START begin_task: Starting task 'selecting calibration port' 2009-Sep-01 04:59:17 LOG5 begin_task: Level: (3) ID = <10505> Status = 0 0 0 0 ok 2009-Sep-01 04:59:17 LOG3 vw_send: To DATATAKING: calport 3 2009-Sep-01 04:59:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Sep-01 04:59:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:59:17 START begin_task: Starting task 'waiting on calport' 2009-Sep-01 04:59:17 LOG5 begin_task: Level: (4) ID = <10506> Status = 0 0 0 0 ok 2009-Sep-01 04:59:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:59:17 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Sep-01 04:59:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:59:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:59:17 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 04:59:17 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Sep-01 04:59:17 LOG5 end_task: Level: (4) ID = <10506> Status = 0 0 0 0 ok 2009-Sep-01 04:59:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Sep-01 04:59:17 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Sep-01 04:59:17 LOG5 end_task: Level: (3) ID = <10505> Status = 0 0 0 0 ok 2009-Sep-01 04:59:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 04:59:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 04:59:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 04:59:17 LOG5 begin_task: Level: (3) ID = <10507> Status = 0 0 0 0 ok 2009-Sep-01 04:59:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:59:17 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 04:59:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 04:59:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 04:59:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 04:59:17 LOG5 end_task: Level: (3) ID = <10507> Status = 0 0 0 0 ok 2009-Sep-01 04:59:17 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Sep-01 04:59:17 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Sep-01 04:59:17 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Sep-01 04:59:17 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Sep-01 04:59:17 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Sep-01 04:59:17 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Sep-01 04:59:17 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Sep-01 04:59:17 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Sep-01 04:59:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 04:59:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 04:59:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 04:59:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 04:59:17 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Sep-01 04:59:17 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Sep-01 04:59:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 04:59:17 LOG5 begin_task: Level: (3) ID = <10508> Status = 0 0 0 0 ok 2009-Sep-01 04:59:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Sep-01 04:59:17 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 04:59:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Sep-01 04:59:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 04:59:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 04:59:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 04:59:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 04:59:17 LOG5 end_task: Level: (3) ID = <10508> Status = 0 0 0 0 ok 2009-Sep-01 04:59:17 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Sep-01 04:59:17 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Sep-01 04:59:17 LOG5 finish_task: Level: (2) ID = <10504> Status = 0 0 0 0 ok 2009-Sep-01 04:59:17 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Sep-01 04:59:18 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Sep-01 04:59:18 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Sep-01 04:59:18 LOG5 end_task: Level: (2) ID = <10504> Status = 0 0 0 0 ok 2009-Sep-01 04:59:18 COMMAND run_command_line: EXECUTING command 8: 'TRACKCURPOS' 2009-Sep-01 04:59:18 BEGIN begin_task: Starting task 'tracking current position' 2009-Sep-01 04:59:18 LOG5 begin_task: Level: (2) ID = <10509> Status = 0 0 0 0 ok 2009-Sep-01 04:59:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2009-Sep-01 04:59:18 INFO1 track_current_pos: Starting to track the current commanded position RA = 03:14:24.1 and Dec = +00:51:07.0 2009-Sep-01 04:59:18 LOG3 track_source: Calling 'track_source Cur-pos 031424.1 005107.0 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Sep-01 04:59:18 START begin_task: Starting task 'sending tracking commands' 2009-Sep-01 04:59:18 LOG5 begin_task: Level: (3) ID = <10510> Status = 0 0 0 0 ok 2009-Sep-01 04:59:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2009-Sep-01 04:59:18 INFO1 track_source: Starting to track Cur-pos 2009-Sep-01 04:59:18 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2009-Sep-01 04:59:18 LOG3 vw_send: To DATATAKING: set ra 031424.1 2009-Sep-01 04:59:18 LOG3 vw_send: To DATATAKING: set dec 005107.0 2009-Sep-01 04:59:18 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Sep-01 04:59:18 LOG3 vw_send: To DATATAKING: pnt tr 031424.1 005107.0 -CJ 2009-Sep-01 04:59:18 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Sep-01 04:59:18 STOP finish_task: Finishing task 'sending tracking commands' 2009-Sep-01 04:59:18 LOG5 finish_task: Level: (3) ID = <10510> Status = 0 0 0 0 ok 2009-Sep-01 04:59:18 INFO2 finish_task: DONE finished sending: tracking commands 2009-Sep-01 04:59:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 04:59:18 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Sep-01 04:59:18 LOG5 end_task: Level: (3) ID = <10510> Status = 0 0 0 0 ok 2009-Sep-01 04:59:18 START begin_task: Starting task 'waiting on telescope' 2009-Sep-01 04:59:18 LOG5 begin_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2009-Sep-01 04:59:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Sep-01 04:59:18 LOG3 waittrk: Start waittrk 5 2009-Sep-01 04:59:18 START begin_task: Starting task 'waiting on telescope movement' 2009-Sep-01 04:59:18 LOG5 begin_task: Level: (4) ID = <10512> Status = 0 0 0 0 ok 2009-Sep-01 04:59:18 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Sep-01 04:59:18 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2009-Sep-01 04:59:18 LOG4 got_cormsg: From DATATAKING: set ra 031424.1 2009-Sep-01 04:59:18 LOG4 got_cormsg: From DATATAKING: set dec 005107.0 2009-Sep-01 04:59:18 LOG4 got_cormsg: From DATATAKING: vw% 031424.1 2009-Sep-01 04:59:18 LOG4 got_cormsg: From DATATAKING: vw% 005107.0 2009-Sep-01 04:59:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:59:18 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Sep-01 04:59:18 LOG4 got_cormsg: From DATATAKING: pnt tr 031424.1 005107.0 -CJ 2009-Sep-01 04:59:18 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Sep-01 04:59:18 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Sep-01 04:59:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:59:23 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Sep-01 04:59:23 LOG5 end_task: Level: (4) ID = <10512> Status = 0 0 0 0 ok 2009-Sep-01 04:59:23 START begin_task: Starting task 'waiting on telescope on source' 2009-Sep-01 04:59:23 LOG5 begin_task: Level: (4) ID = <10513> Status = 0 0 0 0 ok 2009-Sep-01 04:59:27 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Sep-01 04:59:27 LOG5 end_task: Level: (4) ID = <10513> Status = 0 0 0 0 ok 2009-Sep-01 04:59:27 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Sep-01 04:59:27 INFO2 waittrk: Now tracking Cur-pos 2009-Sep-01 04:59:27 LOG4 waittrk: Current telescope position: Az = 359.79 ZA = 17.44 2009-Sep-01 04:59:27 STOP finish_task: Finishing task 'waiting on telescope' 2009-Sep-01 04:59:27 LOG5 finish_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2009-Sep-01 04:59:27 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Sep-01 04:59:27 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 04:59:27 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Sep-01 04:59:27 LOG5 end_task: Level: (3) ID = <10511> Status = 0 0 0 0 ok 2009-Sep-01 04:59:27 STOP finish_task: Finishing task 'tracking current position' 2009-Sep-01 04:59:27 LOG5 finish_task: Level: (2) ID = <10509> Status = 0 0 0 0 ok 2009-Sep-01 04:59:27 DONE finish_task: DONE finished tracking: current position 2009-Sep-01 04:59:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Sep-01 04:59:27 END end_task: Finishing task 'tracking current position' with status 'OK' 2009-Sep-01 04:59:27 LOG5 end_task: Level: (2) ID = <10509> Status = 0 0 0 0 ok 2009-Sep-01 04:59:27 COMMAND run_command_line: EXECUTING command 9: 'ALFAANGLE 19' 2009-Sep-01 04:59:28 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Sep-01 04:59:28 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Sep-01 04:59:28 LOG5 begin_task: Level: (2) ID = <10514> Status = 0 0 0 0 ok 2009-Sep-01 04:59:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Sep-01 04:59:28 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Sep-01 04:59:28 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Sep-01 04:59:28 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Sep-01 04:59:28 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Sep-01 04:59:28 LOG5 begin_task: Level: (3) ID = <10515> Status = 0 0 0 0 ok 2009-Sep-01 04:59:28 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Sep-01 04:59:28 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Sep-01 04:59:28 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Sep-01 04:59:28 LOG5 end_task: Level: (3) ID = <10515> Status = 0 0 0 0 ok 2009-Sep-01 04:59:28 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Sep-01 04:59:28 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Sep-01 04:59:28 LOG5 finish_task: Level: (2) ID = <10514> Status = 0 0 0 0 ok 2009-Sep-01 04:59:28 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Sep-01 04:59:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Sep-01 04:59:29 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Sep-01 04:59:29 LOG5 end_task: Level: (2) ID = <10514> Status = 0 0 0 0 ok 2009-Sep-01 04:59:29 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Sep-01 04:59:29 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Sep-01 04:59:29 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Sep-01 04:59:29 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Sep-01 04:59:29 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Sep-01 04:59:29 LOG5 begin_task: Level: (2) ID = <10516> Status = 0 0 0 0 ok 2009-Sep-01 04:59:29 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2009-Sep-01 04:59:29 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Sep-01 04:59:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Sep-01 04:59:29 START begin_task: Starting task 'selecting calibration type' 2009-Sep-01 04:59:29 LOG5 begin_task: Level: (3) ID = <10517> Status = 0 0 0 0 ok 2009-Sep-01 04:59:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Sep-01 04:59:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Sep-01 04:59:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:59:29 START begin_task: Starting task 'waiting on setcal' 2009-Sep-01 04:59:29 LOG5 begin_task: Level: (4) ID = <10518> Status = 0 0 0 0 ok 2009-Sep-01 04:59:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Sep-01 04:59:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:59:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:59:29 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 04:59:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Sep-01 04:59:29 LOG5 end_task: Level: (4) ID = <10518> Status = 0 0 0 0 ok 2009-Sep-01 04:59:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Sep-01 04:59:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 04:59:29 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Sep-01 04:59:29 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 04:59:29 LOG5 begin_task: Level: (4) ID = <10519> Status = 0 0 0 0 ok 2009-Sep-01 04:59:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:59:29 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 04:59:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 04:59:29 LOG5 end_task: Level: (4) ID = <10519> Status = 0 0 0 0 ok 2009-Sep-01 04:59:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 04:59:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Sep-01 04:59:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Sep-01 04:59:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Sep-01 04:59:29 START begin_task: Starting task 'waiting on command to ALFA' 2009-Sep-01 04:59:29 LOG5 begin_task: Level: (4) ID = <10520> Status = 0 0 0 0 ok 2009-Sep-01 04:59:29 LOG4 got_alfamon: From ALFAMON: ACK 2009-Sep-01 04:59:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Sep-01 04:59:29 LOG5 end_task: Level: (4) ID = <10520> Status = 0 0 0 0 ok 2009-Sep-01 04:59:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Sep-01 04:59:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Sep-01 04:59:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Sep-01 04:59:29 LOG5 end_task: Level: (3) ID = <10517> Status = 0 0 0 0 ok 2009-Sep-01 04:59:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Sep-01 04:59:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Sep-01 04:59:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Sep-01 04:59:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Sep-01 04:59:29 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Sep-01 04:59:30 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Sep-01 04:59:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 04:59:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 04:59:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 04:59:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 04:59:30 LOG5 begin_task: Level: (3) ID = <10521> Status = 0 0 0 0 ok 2009-Sep-01 04:59:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Sep-01 04:59:30 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 04:59:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 04:59:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 04:59:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 04:59:30 LOG5 end_task: Level: (3) ID = <10521> Status = 0 0 0 0 ok 2009-Sep-01 04:59:30 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Sep-01 04:59:30 START begin_task: Starting task 'adjusting WAPP power' 2009-Sep-01 04:59:30 LOG5 begin_task: Level: (3) ID = <10522> Status = 0 0 0 0 ok 2009-Sep-01 04:59:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Sep-01 04:59:30 INFO2 adjust_power: Starting to adjust WAPP power 2009-Sep-01 04:59:30 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Sep-01 04:59:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Sep-01 04:59:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:59:30 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Sep-01 04:59:30 LOG5 begin_task: Level: (4) ID = <10523> Status = 0 0 0 0 ok 2009-Sep-01 04:59:30 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Sep-01 04:59:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Sep-01 04:59:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20090901.a2010.0030.fits 2009-Sep-01 04:59:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090901.a2010.0030.fits} 2009-Sep-01 04:59:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:59:33 LOG4 got_cormsg: From DATATAKING: DONE 2009-Sep-01 04:59:33 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Sep-01 04:59:33 LOG5 end_task: Level: (4) ID = <10523> Status = 0 0 0 0 ok 2009-Sep-01 04:59:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Sep-01 04:59:33 START begin_task: Starting task 'adjusting WAPP power' 2009-Sep-01 04:59:33 LOG5 begin_task: Level: (4) ID = <10524> Status = 0 0 0 0 ok 2009-Sep-01 04:59:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Sep-01 04:59:33 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Sep-01 04:59:33 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Sep-01 04:59:33 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Sep-01 04:59:33 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Sep-01 04:59:33 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Sep-01 04:59:33 LOG5 begin_task: Level: (5) ID = <10525> Status = 0 0 0 0 ok 2009-Sep-01 04:59:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:59:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Sep-01 04:59:33 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Sep-01 04:59:33 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 4 dB 2009-Sep-01 04:59:33 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 5 3 dB --- beam 3: 3 3 dB 2009-Sep-01 04:59:33 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 2 dB --- beam 7: 3 3 dB 2009-Sep-01 04:59:33 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Sep-01 04:59:33 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Sep-01 04:59:33 LOG5 end_task: Level: (5) ID = <10525> Status = 0 0 0 0 ok 2009-Sep-01 04:59:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.060 0.975 ALFA beam 1: 0.940 0.931 2009-Sep-01 04:59:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.111 1.011 ALFA beam 3: 0.968 0.950 2009-Sep-01 04:59:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.904 0.882 ALFA beam 5: 0.998 1.050 2009-Sep-01 04:59:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.019 0.934 ALFA beam 7: 0.907 0.917 2009-Sep-01 04:59:33 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Sep-01 04:59:33 LOG5 finish_task: Level: (4) ID = <10524> Status = 0 0 0 0 ok 2009-Sep-01 04:59:33 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Sep-01 04:59:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 04:59:33 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Sep-01 04:59:33 LOG5 end_task: Level: (4) ID = <10524> Status = 0 0 0 0 ok 2009-Sep-01 04:59:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Sep-01 04:59:34 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Sep-01 04:59:34 LOG5 finish_task: Level: (3) ID = <10522> Status = 0 0 0 0 ok 2009-Sep-01 04:59:34 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Sep-01 04:59:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Sep-01 04:59:34 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Sep-01 04:59:34 LOG5 end_task: Level: (3) ID = <10522> Status = 0 0 0 0 ok 2009-Sep-01 04:59:34 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Sep-01 04:59:34 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Sep-01 04:59:34 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Sep-01 04:59:34 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 04:59:34 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 04:59:34 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 04:59:34 LOG2 antvel: Parameters to Doppler: Topocentric 32373 2009 244 0.0 2009-Sep-01 04:59:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 04:59:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Sep-01 04:59:34 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Sep-01 04:59:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 04:59:34 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 04:59:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Sep-01 04:59:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 04:59:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Sep-01 04:59:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 04:59:34 LOG5 begin_task: Level: (3) ID = <10526> Status = 0 0 0 0 ok 2009-Sep-01 04:59:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Sep-01 04:59:34 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.252886 2009.6686051220627 18.999933 2009-Sep-01 04:59:34 LOG4 log_alfabeam: ALFABEAM 0 3.240027777778062 0.851944444444446 2009-Sep-01 04:59:34 LOG4 log_alfabeam: ALFABEAM 1 3.238893060797521 0.956713746333959 2009-Sep-01 04:59:34 LOG4 log_alfabeam: ALFABEAM 2 3.234283671898746 0.887142356350791 2009-Sep-01 04:59:34 LOG4 log_alfabeam: ALFABEAM 3 3.235396270580527 0.782308501602977 2009-Sep-01 04:59:34 LOG4 log_alfabeam: ALFABEAM 4 3.241175943887134 0.747191317707974 2009-Sep-01 04:59:34 LOG4 log_alfabeam: ALFABEAM 5 3.245794063400876 0.817157887279819 2009-Sep-01 04:59:34 LOG4 log_alfabeam: ALFABEAM 6 3.244623798793531 0.921844751532474 2009-Sep-01 04:59:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400061 2009-Sep-01 04:59:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 04:59:34 LOG5 begin_task: Level: (4) ID = <10527> Status = 0 0 0 0 ok 2009-Sep-01 04:59:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 04:59:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Sep-01 04:59:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 04:59:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:59:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:59:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Sep-01 04:59:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32375.00 2009-Sep-01 04:59:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 04:59:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:59:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:59:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 04:59:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 04:59:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 04:59:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 04:59:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 04:59:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 04:59:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 04:59:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 04:59:45 LOG5 end_task: Level: (4) ID = <10527> Status = 0 0 0 0 ok 2009-Sep-01 04:59:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 04:59:45 LOG5 end_task: Level: (3) ID = <10526> Status = 0 0 0 0 ok 2009-Sep-01 04:59:45 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Sep-01 04:59:45 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Sep-01 04:59:45 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Sep-01 04:59:45 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 04:59:45 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 04:59:45 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 04:59:45 LOG2 antvel: Parameters to Doppler: Topocentric 32384 2009 244 0.0 2009-Sep-01 04:59:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 04:59:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Sep-01 04:59:45 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Sep-01 04:59:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 04:59:45 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 04:59:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Sep-01 04:59:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 04:59:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Sep-01 04:59:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 04:59:45 LOG5 begin_task: Level: (3) ID = <10528> Status = 0 0 0 0 ok 2009-Sep-01 04:59:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Sep-01 04:59:45 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.255950 2009.6686054706315 18.999933 2009-Sep-01 04:59:45 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777679 0.851944444444439 2009-Sep-01 04:59:45 LOG4 log_alfabeam: ALFABEAM 1 3.238910783493008 0.956756578027894 2009-Sep-01 04:59:45 LOG4 log_alfabeam: ALFABEAM 2 3.234289642796226 0.887360767297606 2009-Sep-01 04:59:45 LOG4 log_alfabeam: ALFABEAM 3 3.235384508967935 0.782484923442469 2009-Sep-01 04:59:45 LOG4 log_alfabeam: ALFABEAM 4 3.241158224643506 0.747147974066751 2009-Sep-01 04:59:45 LOG4 log_alfabeam: ALFABEAM 5 3.245788161464313 0.816938625389282 2009-Sep-01 04:59:45 LOG4 log_alfabeam: ALFABEAM 6 3.244635605957189 0.921669675092803 2009-Sep-01 04:59:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400062 2009-Sep-01 04:59:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 04:59:46 LOG5 begin_task: Level: (4) ID = <10529> Status = 0 0 0 0 ok 2009-Sep-01 04:59:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 04:59:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Sep-01 04:59:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 04:59:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:59:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:59:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Sep-01 04:59:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32387.00 2009-Sep-01 04:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 04:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 04:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 04:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 04:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 04:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 04:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 04:59:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 04:59:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 04:59:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 04:59:57 LOG5 end_task: Level: (4) ID = <10529> Status = 0 0 0 0 ok 2009-Sep-01 04:59:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 04:59:57 LOG5 end_task: Level: (3) ID = <10528> Status = 0 0 0 0 ok 2009-Sep-01 04:59:57 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Sep-01 04:59:57 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Sep-01 04:59:57 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Sep-01 04:59:57 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 04:59:57 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 04:59:57 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 04:59:57 LOG2 antvel: Parameters to Doppler: Topocentric 32397 2009 244 0.0 2009-Sep-01 04:59:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 04:59:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Sep-01 04:59:57 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Sep-01 04:59:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 04:59:57 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 04:59:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Sep-01 04:59:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 04:59:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Sep-01 04:59:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 04:59:57 LOG5 begin_task: Level: (3) ID = <10530> Status = 0 0 0 0 ok 2009-Sep-01 04:59:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Sep-01 04:59:57 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.259571 2009.6686058825767 18.999933 2009-Sep-01 04:59:57 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777870 0.851944444444442 2009-Sep-01 04:59:57 LOG4 log_alfabeam: ALFABEAM 1 3.238931736374173 0.956806324674298 2009-Sep-01 04:59:57 LOG4 log_alfabeam: ALFABEAM 2 3.234296746355541 0.887618577365124 2009-Sep-01 04:59:57 LOG4 log_alfabeam: ALFABEAM 3 3.235370648434107 0.782693983615802 2009-Sep-01 04:59:57 LOG4 log_alfabeam: ALFABEAM 4 3.241137275608810 0.747097622133619 2009-Sep-01 04:59:57 LOG4 log_alfabeam: ALFABEAM 5 3.245781139012154 0.816679802592820 2009-Sep-01 04:59:57 LOG4 log_alfabeam: ALFABEAM 6 3.244649520924749 0.921462200112856 2009-Sep-01 04:59:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400063 2009-Sep-01 04:59:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 04:59:58 LOG5 begin_task: Level: (4) ID = <10531> Status = 0 0 0 0 ok 2009-Sep-01 04:59:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 04:59:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Sep-01 04:59:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 04:59:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:59:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 04:59:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Sep-01 04:59:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32399.00 2009-Sep-01 05:00:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:00:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:00:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:00:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:00:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:00:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:00:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:00:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:00:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:00:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:00:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:00:09 LOG5 end_task: Level: (4) ID = <10531> Status = 0 0 0 0 ok 2009-Sep-01 05:00:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:00:09 LOG5 end_task: Level: (3) ID = <10530> Status = 0 0 0 0 ok 2009-Sep-01 05:00:09 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Sep-01 05:00:09 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Sep-01 05:00:09 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Sep-01 05:00:09 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:00:09 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:00:09 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:00:09 LOG2 antvel: Parameters to Doppler: Topocentric 32409 2009 244 0.0 2009-Sep-01 05:00:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:00:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Sep-01 05:00:09 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Sep-01 05:00:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:00:09 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:00:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Sep-01 05:00:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:00:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Sep-01 05:00:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:00:09 LOG5 begin_task: Level: (3) ID = <10532> Status = 0 0 0 0 ok 2009-Sep-01 05:00:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Sep-01 05:00:09 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.262913 2009.6686062628337 18.999933 2009-Sep-01 05:00:09 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777958 0.851944444444453 2009-Sep-01 05:00:09 LOG4 log_alfabeam: ALFABEAM 1 3.238951082420472 0.956851399634978 2009-Sep-01 05:00:09 LOG4 log_alfabeam: ALFABEAM 2 3.234303347806053 0.887856223503443 2009-Sep-01 05:00:09 LOG4 log_alfabeam: ALFABEAM 3 3.235357893861296 0.782887475652582 2009-Sep-01 05:00:09 LOG4 log_alfabeam: ALFABEAM 4 3.241117932887297 0.747051988289796 2009-Sep-01 05:00:09 LOG4 log_alfabeam: ALFABEAM 5 3.245774612037467 0.816441214986564 2009-Sep-01 05:00:09 LOG4 log_alfabeam: ALFABEAM 6 3.244662326321751 0.921270166455556 2009-Sep-01 05:00:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400064 2009-Sep-01 05:00:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:00:10 LOG5 begin_task: Level: (4) ID = <10533> Status = 0 0 0 0 ok 2009-Sep-01 05:00:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:00:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Sep-01 05:00:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:00:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:00:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:00:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Sep-01 05:00:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32411.00 2009-Sep-01 05:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:00:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:00:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:00:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:00:21 LOG5 end_task: Level: (4) ID = <10533> Status = 0 0 0 0 ok 2009-Sep-01 05:00:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:00:21 LOG5 end_task: Level: (3) ID = <10532> Status = 0 0 0 0 ok 2009-Sep-01 05:00:21 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Sep-01 05:00:21 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Sep-01 05:00:21 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Sep-01 05:00:21 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:00:21 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:00:21 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:00:21 LOG2 antvel: Parameters to Doppler: Topocentric 32421 2009 244 0.0 2009-Sep-01 05:00:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:00:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Sep-01 05:00:21 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Sep-01 05:00:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:00:21 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:00:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Sep-01 05:00:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:00:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Sep-01 05:00:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:00:21 LOG5 begin_task: Level: (3) ID = <10534> Status = 0 0 0 0 ok 2009-Sep-01 05:00:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Sep-01 05:00:21 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.266256 2009.6686066430907 18.999933 2009-Sep-01 05:00:21 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777916 0.851944444444447 2009-Sep-01 05:00:21 LOG4 log_alfabeam: ALFABEAM 1 3.238970441074372 0.956895681703148 2009-Sep-01 05:00:21 LOG4 log_alfabeam: ALFABEAM 2 3.234309994492397 0.888093647339515 2009-Sep-01 05:00:21 LOG4 log_alfabeam: ALFABEAM 3 3.235345172270445 0.783081539379652 2009-Sep-01 05:00:21 LOG4 log_alfabeam: ALFABEAM 4 3.241098577342317 0.747007146974773 2009-Sep-01 05:00:21 LOG4 log_alfabeam: ALFABEAM 5 3.245768039478258 0.816202842947683 2009-Sep-01 05:00:21 LOG4 log_alfabeam: ALFABEAM 6 3.244675099311667 0.921077556982686 2009-Sep-01 05:00:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400065 2009-Sep-01 05:00:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:00:22 LOG5 begin_task: Level: (4) ID = <10535> Status = 0 0 0 0 ok 2009-Sep-01 05:00:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:00:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Sep-01 05:00:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:00:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:00:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:00:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Sep-01 05:00:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32423.00 2009-Sep-01 05:00:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:00:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:00:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:00:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:00:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:00:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:00:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:00:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:00:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:00:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:00:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:00:33 LOG5 end_task: Level: (4) ID = <10535> Status = 0 0 0 0 ok 2009-Sep-01 05:00:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:00:33 LOG5 end_task: Level: (3) ID = <10534> Status = 0 0 0 0 ok 2009-Sep-01 05:00:33 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Sep-01 05:00:33 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Sep-01 05:00:33 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Sep-01 05:00:33 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:00:33 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:00:33 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:00:33 LOG2 antvel: Parameters to Doppler: Topocentric 32433 2009 244 0.0 2009-Sep-01 05:00:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:00:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Sep-01 05:00:33 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Sep-01 05:00:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:00:33 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:00:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Sep-01 05:00:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:00:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Sep-01 05:00:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:00:33 LOG5 begin_task: Level: (3) ID = <10536> Status = 0 0 0 0 ok 2009-Sep-01 05:00:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Sep-01 05:00:33 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.269598 2009.6686070233479 18.999933 2009-Sep-01 05:00:33 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777856 0.851944444444443 2009-Sep-01 05:00:33 LOG4 log_alfabeam: ALFABEAM 1 3.238989800291512 0.956939143528262 2009-Sep-01 05:00:33 LOG4 log_alfabeam: ALFABEAM 2 3.234316682268700 0.888330701252340 2009-Sep-01 05:00:33 LOG4 log_alfabeam: ALFABEAM 3 3.235332491566656 0.783276053929492 2009-Sep-01 05:00:33 LOG4 log_alfabeam: ALFABEAM 4 3.241079221016928 0.746963125901247 2009-Sep-01 05:00:33 LOG4 log_alfabeam: ALFABEAM 5 3.245761425433833 0.815964834712588 2009-Sep-01 05:00:33 LOG4 log_alfabeam: ALFABEAM 6 3.244687831956049 0.920884491621278 2009-Sep-01 05:00:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400066 2009-Sep-01 05:00:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:00:34 LOG5 begin_task: Level: (4) ID = <10537> Status = 0 0 0 0 ok 2009-Sep-01 05:00:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:00:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Sep-01 05:00:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:00:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:00:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:00:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Sep-01 05:00:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32435.00 2009-Sep-01 05:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:00:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:00:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:00:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:00:45 LOG5 end_task: Level: (4) ID = <10537> Status = 0 0 0 0 ok 2009-Sep-01 05:00:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:00:45 LOG5 end_task: Level: (3) ID = <10536> Status = 0 0 0 0 ok 2009-Sep-01 05:00:45 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Sep-01 05:00:45 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Sep-01 05:00:45 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Sep-01 05:00:45 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:00:45 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:00:45 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:00:45 LOG2 antvel: Parameters to Doppler: Topocentric 32445 2009 244 0.0 2009-Sep-01 05:00:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:00:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Sep-01 05:00:45 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Sep-01 05:00:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:00:45 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:00:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Sep-01 05:00:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:00:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Sep-01 05:00:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:00:45 LOG5 begin_task: Level: (3) ID = <10538> Status = 0 0 0 0 ok 2009-Sep-01 05:00:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Sep-01 05:00:45 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.272941 2009.6686074036049 18.999933 2009-Sep-01 05:00:45 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777896 0.851944444444447 2009-Sep-01 05:00:45 LOG4 log_alfabeam: ALFABEAM 1 3.239009171193469 0.956981810319937 2009-Sep-01 05:00:45 LOG4 log_alfabeam: ALFABEAM 2 3.234323414964187 0.888567521547695 2009-Sep-01 05:00:45 LOG4 log_alfabeam: ALFABEAM 3 3.235319844452294 0.783471130904619 2009-Sep-01 05:00:45 LOG4 log_alfabeam: ALFABEAM 4 3.241059852790866 0.746919899552477 2009-Sep-01 05:00:45 LOG4 log_alfabeam: ALFABEAM 5 3.245754766114455 0.815727053453072 2009-Sep-01 05:00:45 LOG4 log_alfabeam: ALFABEAM 6 3.244700531580537 0.920690859565907 2009-Sep-01 05:00:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400067 2009-Sep-01 05:00:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:00:46 LOG5 begin_task: Level: (4) ID = <10539> Status = 0 0 0 0 ok 2009-Sep-01 05:00:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:00:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Sep-01 05:00:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:00:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:00:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:00:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Sep-01 05:00:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32447.00 2009-Sep-01 05:00:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:00:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:00:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:00:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:00:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:00:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:00:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:00:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:00:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:00:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:00:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:00:57 LOG5 end_task: Level: (4) ID = <10539> Status = 0 0 0 0 ok 2009-Sep-01 05:00:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:00:57 LOG5 end_task: Level: (3) ID = <10538> Status = 0 0 0 0 ok 2009-Sep-01 05:00:57 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Sep-01 05:00:57 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 05:00:57 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 05:00:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 05:00:57 LOG5 begin_task: Level: (3) ID = <10540> Status = 0 0 0 0 ok 2009-Sep-01 05:00:57 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 05:00:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 05:00:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 05:00:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 05:00:57 LOG5 end_task: Level: (3) ID = <10540> Status = 0 0 0 0 ok 2009-Sep-01 05:00:57 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Sep-01 05:00:57 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Sep-01 05:00:57 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Sep-01 05:00:57 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:00:57 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:00:57 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:00:57 LOG2 antvel: Parameters to Doppler: Topocentric 32457 2009 244 0.0 2009-Sep-01 05:00:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:00:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Sep-01 05:00:57 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Sep-01 05:00:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:00:57 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:00:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Sep-01 05:00:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:00:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Sep-01 05:00:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:00:57 LOG5 begin_task: Level: (3) ID = <10541> Status = 0 0 0 0 ok 2009-Sep-01 05:00:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Sep-01 05:00:57 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.276283 2009.6686077838619 18.999933 2009-Sep-01 05:00:57 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777802 0.851944444444444 2009-Sep-01 05:00:57 LOG4 log_alfabeam: ALFABEAM 1 3.239028541727784 0.957023655811290 2009-Sep-01 05:00:57 LOG4 log_alfabeam: ALFABEAM 2 3.234330188375707 0.888803961012495 2009-Sep-01 05:00:57 LOG4 log_alfabeam: ALFABEAM 3 3.235307238782380 0.783666648760744 2009-Sep-01 05:00:57 LOG4 log_alfabeam: ALFABEAM 4 3.241040484715259 0.746877494557689 2009-Sep-01 05:00:57 LOG4 log_alfabeam: ALFABEAM 5 3.245748065676850 0.815489647006405 2009-Sep-01 05:00:57 LOG4 log_alfabeam: ALFABEAM 6 3.244713190296557 0.920496781426878 2009-Sep-01 05:00:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400068 2009-Sep-01 05:00:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:00:58 LOG5 begin_task: Level: (4) ID = <10542> Status = 0 0 0 0 ok 2009-Sep-01 05:00:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:00:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Sep-01 05:00:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:00:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:00:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:00:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Sep-01 05:00:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32459.00 2009-Sep-01 05:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:01:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:01:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:01:09 LOG5 end_task: Level: (4) ID = <10542> Status = 0 0 0 0 ok 2009-Sep-01 05:01:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:01:09 LOG5 end_task: Level: (3) ID = <10541> Status = 0 0 0 0 ok 2009-Sep-01 05:01:09 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Sep-01 05:01:09 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Sep-01 05:01:09 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Sep-01 05:01:09 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:01:09 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:01:09 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:01:09 LOG2 antvel: Parameters to Doppler: Topocentric 32469 2009 244 0.0 2009-Sep-01 05:01:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:01:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Sep-01 05:01:09 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Sep-01 05:01:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:01:09 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:01:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Sep-01 05:01:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:01:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Sep-01 05:01:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:01:09 LOG5 begin_task: Level: (3) ID = <10543> Status = 0 0 0 0 ok 2009-Sep-01 05:01:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Sep-01 05:01:09 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.279626 2009.668608164119 18.999933 2009-Sep-01 05:01:09 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777839 0.851944444444441 2009-Sep-01 05:01:09 LOG4 log_alfabeam: ALFABEAM 1 3.239047923022032 0.957064704362121 2009-Sep-01 05:01:09 LOG4 log_alfabeam: ALFABEAM 2 3.234337006377396 0.889040155632997 2009-Sep-01 05:01:09 LOG4 log_alfabeam: ALFABEAM 3 3.235294667298273 0.783862719631374 2009-Sep-01 05:01:09 LOG4 log_alfabeam: ALFABEAM 4 3.241021105663469 0.746835886249800 2009-Sep-01 05:01:09 LOG4 log_alfabeam: ALFABEAM 5 3.245741320286144 0.815252478857512 2009-Sep-01 05:01:09 LOG4 log_alfabeam: ALFABEAM 6 3.244725815390902 0.920302145863151 2009-Sep-01 05:01:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400069 2009-Sep-01 05:01:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:01:10 LOG5 begin_task: Level: (4) ID = <10544> Status = 0 0 0 0 ok 2009-Sep-01 05:01:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:01:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Sep-01 05:01:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:01:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:01:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:01:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Sep-01 05:01:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32471.00 2009-Sep-01 05:01:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:01:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:01:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:01:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:01:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:01:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:01:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:01:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:01:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:01:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:01:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:01:21 LOG5 end_task: Level: (4) ID = <10544> Status = 0 0 0 0 ok 2009-Sep-01 05:01:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:01:21 LOG5 end_task: Level: (3) ID = <10543> Status = 0 0 0 0 ok 2009-Sep-01 05:01:21 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Sep-01 05:01:21 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Sep-01 05:01:21 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Sep-01 05:01:21 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:01:21 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:01:21 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:01:21 LOG2 antvel: Parameters to Doppler: Topocentric 32481 2009 244 0.0 2009-Sep-01 05:01:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:01:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Sep-01 05:01:21 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Sep-01 05:01:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:01:21 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:01:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Sep-01 05:01:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:01:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Sep-01 05:01:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:01:21 LOG5 begin_task: Level: (3) ID = <10545> Status = 0 0 0 0 ok 2009-Sep-01 05:01:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Sep-01 05:01:21 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.282968 2009.668608544376 18.999933 2009-Sep-01 05:01:21 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777889 0.851944444444449 2009-Sep-01 05:01:21 LOG4 log_alfabeam: ALFABEAM 1 3.239067303017332 0.957104930791265 2009-Sep-01 05:01:21 LOG4 log_alfabeam: ALFABEAM 2 3.234343864708913 0.889275958619867 2009-Sep-01 05:01:21 LOG4 log_alfabeam: ALFABEAM 3 3.235282137804296 0.784059221309434 2009-Sep-01 05:01:21 LOG4 log_alfabeam: ALFABEAM 4 3.241001727693539 0.746795100172469 2009-Sep-01 05:01:21 LOG4 log_alfabeam: ALFABEAM 5 3.245734534156773 0.815015696428600 2009-Sep-01 05:01:21 LOG4 log_alfabeam: ALFABEAM 6 3.244738399025188 0.920107074154515 2009-Sep-01 05:01:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400070 2009-Sep-01 05:01:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:01:22 LOG5 begin_task: Level: (4) ID = <10546> Status = 0 0 0 0 ok 2009-Sep-01 05:01:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:01:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Sep-01 05:01:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:01:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:01:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:01:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Sep-01 05:01:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32483.00 2009-Sep-01 05:01:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:01:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:01:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:01:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:01:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:01:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:01:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:01:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:01:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:01:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:01:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:01:33 LOG5 end_task: Level: (4) ID = <10546> Status = 0 0 0 0 ok 2009-Sep-01 05:01:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:01:33 LOG5 end_task: Level: (3) ID = <10545> Status = 0 0 0 0 ok 2009-Sep-01 05:01:33 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Sep-01 05:01:33 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Sep-01 05:01:33 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Sep-01 05:01:33 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:01:33 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:01:33 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:01:33 LOG2 antvel: Parameters to Doppler: Topocentric 32493 2009 244 0.0 2009-Sep-01 05:01:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:01:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Sep-01 05:01:33 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Sep-01 05:01:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:01:33 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:01:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Sep-01 05:01:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:01:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Sep-01 05:01:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:01:33 LOG5 begin_task: Level: (3) ID = <10547> Status = 0 0 0 0 ok 2009-Sep-01 05:01:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Sep-01 05:01:33 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.286311 2009.6686089246332 18.999933 2009-Sep-01 05:01:33 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777764 0.851944444444441 2009-Sep-01 05:01:33 LOG4 log_alfabeam: ALFABEAM 1 3.239086692846759 0.957144358607271 2009-Sep-01 05:01:33 LOG4 log_alfabeam: ALFABEAM 2 3.234350767289501 0.889511505629179 2009-Sep-01 05:01:33 LOG4 log_alfabeam: ALFABEAM 3 3.235269643081652 0.784256266450241 2009-Sep-01 05:01:33 LOG4 log_alfabeam: ALFABEAM 4 3.240982339673147 0.746755112509730 2009-Sep-01 05:01:33 LOG4 log_alfabeam: ALFABEAM 5 3.245727703408377 0.814779163528390 2009-Sep-01 05:01:33 LOG4 log_alfabeam: ALFABEAM 6 3.244750948446832 0.919911454433232 2009-Sep-01 05:01:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400071 2009-Sep-01 05:01:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:01:34 LOG5 begin_task: Level: (4) ID = <10548> Status = 0 0 0 0 ok 2009-Sep-01 05:01:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:01:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Sep-01 05:01:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:01:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:01:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:01:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Sep-01 05:01:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32495.00 2009-Sep-01 05:01:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:01:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:01:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:01:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:01:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:01:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:01:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:01:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:01:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:01:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:01:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:01:45 LOG5 end_task: Level: (4) ID = <10548> Status = 0 0 0 0 ok 2009-Sep-01 05:01:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:01:45 LOG5 end_task: Level: (3) ID = <10547> Status = 0 0 0 0 ok 2009-Sep-01 05:01:45 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Sep-01 05:01:45 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Sep-01 05:01:45 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Sep-01 05:01:45 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:01:45 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:01:45 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:01:45 LOG2 antvel: Parameters to Doppler: Topocentric 32505 2009 244 0.0 2009-Sep-01 05:01:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:01:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Sep-01 05:01:45 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Sep-01 05:01:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:01:45 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:01:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Sep-01 05:01:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:01:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Sep-01 05:01:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:01:45 LOG5 begin_task: Level: (3) ID = <10549> Status = 0 0 0 0 ok 2009-Sep-01 05:01:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Sep-01 05:01:45 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.289653 2009.6686093048902 18.999933 2009-Sep-01 05:01:45 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777788 0.851944444444442 2009-Sep-01 05:01:45 LOG4 log_alfabeam: ALFABEAM 1 3.239106080445804 0.957182963716212 2009-Sep-01 05:01:45 LOG4 log_alfabeam: ALFABEAM 2 3.234357709802183 0.889746650311029 2009-Sep-01 05:01:45 LOG4 log_alfabeam: ALFABEAM 3 3.235257190882633 0.784453732198014 2009-Sep-01 05:01:45 LOG4 log_alfabeam: ALFABEAM 4 3.240962953666058 0.746715947718033 2009-Sep-01 05:01:45 LOG4 log_alfabeam: ALFABEAM 5 3.245720832312392 0.814543027148223 2009-Sep-01 05:01:45 LOG4 log_alfabeam: ALFABEAM 6 3.244763455868470 0.919715408634817 2009-Sep-01 05:01:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400072 2009-Sep-01 05:01:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:01:46 LOG5 begin_task: Level: (4) ID = <10550> Status = 0 0 0 0 ok 2009-Sep-01 05:01:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:01:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Sep-01 05:01:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:01:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:01:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:01:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Sep-01 05:01:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32507.00 2009-Sep-01 05:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:01:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:01:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:01:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:01:57 LOG5 end_task: Level: (4) ID = <10550> Status = 0 0 0 0 ok 2009-Sep-01 05:01:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:01:57 LOG5 end_task: Level: (3) ID = <10549> Status = 0 0 0 0 ok 2009-Sep-01 05:01:57 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Sep-01 05:01:57 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Sep-01 05:01:57 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Sep-01 05:01:57 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:01:57 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:01:57 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:01:57 LOG2 antvel: Parameters to Doppler: Topocentric 32517 2009 244 0.0 2009-Sep-01 05:01:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:01:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Sep-01 05:01:57 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Sep-01 05:01:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:01:57 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:01:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Sep-01 05:01:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:01:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Sep-01 05:01:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:01:57 LOG5 begin_task: Level: (3) ID = <10551> Status = 0 0 0 0 ok 2009-Sep-01 05:01:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Sep-01 05:01:57 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.292995 2009.6686096851472 18.999933 2009-Sep-01 05:01:57 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777783 0.851944444444446 2009-Sep-01 05:01:57 LOG4 log_alfabeam: ALFABEAM 1 3.239125471149749 0.957220757586823 2009-Sep-01 05:01:57 LOG4 log_alfabeam: ALFABEAM 2 3.234364694114744 0.889981457772194 2009-Sep-01 05:01:57 LOG4 log_alfabeam: ALFABEAM 3 3.235244777737627 0.784651672421941 2009-Sep-01 05:01:57 LOG4 log_alfabeam: ALFABEAM 4 3.240943564337541 0.746677594188604 2009-Sep-01 05:01:57 LOG4 log_alfabeam: ALFABEAM 5 3.245713919018959 0.814307221939321 2009-Sep-01 05:01:57 LOG4 log_alfabeam: ALFABEAM 6 3.244775924772691 0.919518883250144 2009-Sep-01 05:01:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400073 2009-Sep-01 05:01:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:01:58 LOG5 begin_task: Level: (4) ID = <10552> Status = 0 0 0 0 ok 2009-Sep-01 05:01:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:01:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Sep-01 05:01:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:01:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:01:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:01:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Sep-01 05:01:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32519.00 2009-Sep-01 05:02:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:02:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:02:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:02:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:02:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:02:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:02:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:02:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:02:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:02:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:02:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:02:09 LOG5 end_task: Level: (4) ID = <10552> Status = 0 0 0 0 ok 2009-Sep-01 05:02:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:02:09 LOG5 end_task: Level: (3) ID = <10551> Status = 0 0 0 0 ok 2009-Sep-01 05:02:09 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Sep-01 05:02:09 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Sep-01 05:02:09 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Sep-01 05:02:09 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:02:09 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:02:09 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:02:09 LOG2 antvel: Parameters to Doppler: Topocentric 32529 2009 244 0.0 2009-Sep-01 05:02:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:02:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Sep-01 05:02:09 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Sep-01 05:02:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:02:09 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:02:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Sep-01 05:02:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:02:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Sep-01 05:02:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:02:09 LOG5 begin_task: Level: (3) ID = <10553> Status = 0 0 0 0 ok 2009-Sep-01 05:02:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Sep-01 05:02:09 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.296338 2009.6686100654042 18.999933 2009-Sep-01 05:02:09 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777823 0.851944444444450 2009-Sep-01 05:02:09 LOG4 log_alfabeam: ALFABEAM 1 3.239144870297749 0.957257750775709 2009-Sep-01 05:02:09 LOG4 log_alfabeam: ALFABEAM 2 3.234371722142208 0.890215992743381 2009-Sep-01 05:02:09 LOG4 log_alfabeam: ALFABEAM 3 3.235232400220905 0.784850141527781 2009-Sep-01 05:02:09 LOG4 log_alfabeam: ALFABEAM 4 3.240924166348810 0.746640041224991 2009-Sep-01 05:02:09 LOG4 log_alfabeam: ALFABEAM 5 3.245706961630927 0.814071682922380 2009-Sep-01 05:02:09 LOG4 log_alfabeam: ALFABEAM 6 3.244788358599255 0.919321824228000 2009-Sep-01 05:02:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400074 2009-Sep-01 05:02:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:02:10 LOG5 begin_task: Level: (4) ID = <10554> Status = 0 0 0 0 ok 2009-Sep-01 05:02:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:02:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Sep-01 05:02:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:02:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:02:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:02:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Sep-01 05:02:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32531.00 2009-Sep-01 05:02:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:02:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:02:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:02:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:02:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:02:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:02:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:02:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:02:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:02:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:02:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:02:21 LOG5 end_task: Level: (4) ID = <10554> Status = 0 0 0 0 ok 2009-Sep-01 05:02:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:02:21 LOG5 end_task: Level: (3) ID = <10553> Status = 0 0 0 0 ok 2009-Sep-01 05:02:21 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Sep-01 05:02:21 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Sep-01 05:02:21 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Sep-01 05:02:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 05:02:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 05:02:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 05:02:21 LOG5 begin_task: Level: (3) ID = <10555> Status = 0 0 0 0 ok 2009-Sep-01 05:02:21 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 05:02:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 05:02:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 05:02:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 05:02:21 LOG5 end_task: Level: (3) ID = <10555> Status = 0 0 0 0 ok 2009-Sep-01 05:02:21 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Sep-01 05:02:21 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Sep-01 05:02:21 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Sep-01 05:02:21 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Sep-01 05:02:21 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:02:21 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:02:21 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:02:21 LOG2 antvel: Parameters to Doppler: Topocentric 32541 2009 244 0.0 2009-Sep-01 05:02:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:02:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Sep-01 05:02:21 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Sep-01 05:02:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:02:21 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:02:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Sep-01 05:02:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:02:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Sep-01 05:02:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:02:21 LOG5 begin_task: Level: (3) ID = <10556> Status = 0 0 0 0 ok 2009-Sep-01 05:02:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Sep-01 05:02:21 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.299680 2009.6686104456612 18.999933 2009-Sep-01 05:02:21 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777833 0.851944444444444 2009-Sep-01 05:02:21 LOG4 log_alfabeam: ALFABEAM 1 3.239164265819582 0.957293920822006 2009-Sep-01 05:02:21 LOG4 log_alfabeam: ALFABEAM 2 3.234378789483548 0.890450109562710 2009-Sep-01 05:02:21 LOG4 log_alfabeam: ALFABEAM 3 3.235220066005349 0.785049015713924 2009-Sep-01 05:02:21 LOG4 log_alfabeam: ALFABEAM 4 3.240904771769419 0.746603311650306 2009-Sep-01 05:02:21 LOG4 log_alfabeam: ALFABEAM 5 3.245699964503718 0.813836556413039 2009-Sep-01 05:02:21 LOG4 log_alfabeam: ALFABEAM 6 3.244800749638320 0.919124354460411 2009-Sep-01 05:02:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400075 2009-Sep-01 05:02:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:02:22 LOG5 begin_task: Level: (4) ID = <10557> Status = 0 0 0 0 ok 2009-Sep-01 05:02:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:02:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Sep-01 05:02:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:02:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:02:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:02:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Sep-01 05:02:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32543.00 2009-Sep-01 05:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:02:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:02:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:02:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:02:33 LOG5 end_task: Level: (4) ID = <10557> Status = 0 0 0 0 ok 2009-Sep-01 05:02:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:02:33 LOG5 end_task: Level: (3) ID = <10556> Status = 0 0 0 0 ok 2009-Sep-01 05:02:33 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Sep-01 05:02:33 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Sep-01 05:02:33 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Sep-01 05:02:33 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:02:33 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:02:33 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:02:33 LOG2 antvel: Parameters to Doppler: Topocentric 32553 2009 244 0.0 2009-Sep-01 05:02:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:02:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Sep-01 05:02:33 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Sep-01 05:02:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:02:33 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:02:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Sep-01 05:02:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:02:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Sep-01 05:02:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:02:33 LOG5 begin_task: Level: (3) ID = <10558> Status = 0 0 0 0 ok 2009-Sep-01 05:02:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Sep-01 05:02:33 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.303023 2009.6686108259184 18.999933 2009-Sep-01 05:02:33 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777819 0.851944444444447 2009-Sep-01 05:02:33 LOG4 log_alfabeam: ALFABEAM 1 3.239183668858239 0.957329289101052 2009-Sep-01 05:02:33 LOG4 log_alfabeam: ALFABEAM 2 3.234385900168878 0.890683943014926 2009-Sep-01 05:02:33 LOG4 log_alfabeam: ALFABEAM 3 3.235207767974666 0.785248408898885 2009-Sep-01 05:02:33 LOG4 log_alfabeam: ALFABEAM 4 3.240885369457022 0.746567383781874 2009-Sep-01 05:02:33 LOG4 log_alfabeam: ALFABEAM 5 3.245692923646219 0.813601707076045 2009-Sep-01 05:02:33 LOG4 log_alfabeam: ALFABEAM 6 3.244813105037176 0.918926360803934 2009-Sep-01 05:02:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400076 2009-Sep-01 05:02:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:02:34 LOG5 begin_task: Level: (4) ID = <10559> Status = 0 0 0 0 ok 2009-Sep-01 05:02:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:02:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Sep-01 05:02:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:02:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:02:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:02:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Sep-01 05:02:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32555.00 2009-Sep-01 05:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:02:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:02:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:02:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:02:45 LOG5 end_task: Level: (4) ID = <10559> Status = 0 0 0 0 ok 2009-Sep-01 05:02:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:02:45 LOG5 end_task: Level: (3) ID = <10558> Status = 0 0 0 0 ok 2009-Sep-01 05:02:45 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Sep-01 05:02:45 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Sep-01 05:02:45 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Sep-01 05:02:45 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:02:45 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:02:45 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:02:45 LOG2 antvel: Parameters to Doppler: Topocentric 32565 2009 244 0.0 2009-Sep-01 05:02:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:02:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Sep-01 05:02:45 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Sep-01 05:02:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:02:45 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:02:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Sep-01 05:02:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:02:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Sep-01 05:02:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:02:45 LOG5 begin_task: Level: (3) ID = <10560> Status = 0 0 0 0 ok 2009-Sep-01 05:02:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Sep-01 05:02:45 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.306365 2009.6686112061755 18.999933 2009-Sep-01 05:02:45 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777842 0.851944444444448 2009-Sep-01 05:02:45 LOG4 log_alfabeam: ALFABEAM 1 3.239203067341691 0.957363834241727 2009-Sep-01 05:02:45 LOG4 log_alfabeam: ALFABEAM 2 3.234393049742102 0.890917347915986 2009-Sep-01 05:02:45 LOG4 log_alfabeam: ALFABEAM 3 3.235195513748076 0.785448196668776 2009-Sep-01 05:02:45 LOG4 log_alfabeam: ALFABEAM 4 3.240865971483449 0.746532279352936 2009-Sep-01 05:02:45 LOG4 log_alfabeam: ALFABEAM 5 3.245685843469594 0.813367280757340 2009-Sep-01 05:02:45 LOG4 log_alfabeam: ALFABEAM 6 3.244825417138966 0.918727966770315 2009-Sep-01 05:02:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400077 2009-Sep-01 05:02:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:02:46 LOG5 begin_task: Level: (4) ID = <10561> Status = 0 0 0 0 ok 2009-Sep-01 05:02:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:02:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Sep-01 05:02:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:02:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:02:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:02:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Sep-01 05:02:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32567.00 2009-Sep-01 05:02:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:02:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:02:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:02:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:02:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:02:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:02:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:02:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:02:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:02:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:02:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:02:57 LOG5 end_task: Level: (4) ID = <10561> Status = 0 0 0 0 ok 2009-Sep-01 05:02:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:02:57 LOG5 end_task: Level: (3) ID = <10560> Status = 0 0 0 0 ok 2009-Sep-01 05:02:57 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Sep-01 05:02:57 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Sep-01 05:02:57 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Sep-01 05:02:57 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:02:57 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:02:57 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:02:57 LOG2 antvel: Parameters to Doppler: Topocentric 32577 2009 244 0.0 2009-Sep-01 05:02:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:02:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Sep-01 05:02:57 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Sep-01 05:02:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:02:57 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:02:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Sep-01 05:02:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:02:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Sep-01 05:02:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:02:57 LOG5 begin_task: Level: (3) ID = <10562> Status = 0 0 0 0 ok 2009-Sep-01 05:02:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Sep-01 05:02:57 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.309708 2009.6686115864325 18.999933 2009-Sep-01 05:02:57 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777815 0.851944444444448 2009-Sep-01 05:02:57 LOG4 log_alfabeam: ALFABEAM 1 3.239222472415086 0.957397576764524 2009-Sep-01 05:02:57 LOG4 log_alfabeam: ALFABEAM 2 3.234400242276758 0.891150458683864 2009-Sep-01 05:02:57 LOG4 log_alfabeam: ALFABEAM 3 3.235183296250898 0.785648493430664 2009-Sep-01 05:02:57 LOG4 log_alfabeam: ALFABEAM 4 3.240846566703908 0.746497977535698 2009-Sep-01 05:02:57 LOG4 log_alfabeam: ALFABEAM 5 3.245678719938613 0.813133142482389 2009-Sep-01 05:02:57 LOG4 log_alfabeam: ALFABEAM 6 3.244837693049827 0.918529058722321 2009-Sep-01 05:02:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400078 2009-Sep-01 05:02:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:02:58 LOG5 begin_task: Level: (4) ID = <10563> Status = 0 0 0 0 ok 2009-Sep-01 05:02:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:02:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Sep-01 05:02:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:02:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:02:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:02:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Sep-01 05:02:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32579.00 2009-Sep-01 05:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:03:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:03:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:03:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:03:09 LOG5 end_task: Level: (4) ID = <10563> Status = 0 0 0 0 ok 2009-Sep-01 05:03:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:03:09 LOG5 end_task: Level: (3) ID = <10562> Status = 0 0 0 0 ok 2009-Sep-01 05:03:09 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Sep-01 05:03:09 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Sep-01 05:03:09 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Sep-01 05:03:09 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:03:09 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:03:09 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:03:09 LOG2 antvel: Parameters to Doppler: Topocentric 32589 2009 244 0.0 2009-Sep-01 05:03:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:03:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Sep-01 05:03:09 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Sep-01 05:03:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:03:09 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:03:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Sep-01 05:03:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:03:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Sep-01 05:03:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:03:09 LOG5 begin_task: Level: (3) ID = <10564> Status = 0 0 0 0 ok 2009-Sep-01 05:03:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Sep-01 05:03:09 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.313050 2009.6686119666895 18.999933 2009-Sep-01 05:03:09 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777796 0.851944444444445 2009-Sep-01 05:03:09 LOG4 log_alfabeam: ALFABEAM 1 3.239241872005735 0.957430496388337 2009-Sep-01 05:03:09 LOG4 log_alfabeam: ALFABEAM 2 3.234407473262267 0.891383130627362 2009-Sep-01 05:03:09 LOG4 log_alfabeam: ALFABEAM 3 3.235171123047979 0.785849174173204 2009-Sep-01 05:03:09 LOG4 log_alfabeam: ALFABEAM 4 3.240827167191053 0.746464498973201 2009-Sep-01 05:03:09 LOG4 log_alfabeam: ALFABEAM 5 3.245671557519644 0.812899437612237 2009-Sep-01 05:03:09 LOG4 log_alfabeam: ALFABEAM 6 3.244849925166593 0.918329760776763 2009-Sep-01 05:03:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400079 2009-Sep-01 05:03:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:03:10 LOG5 begin_task: Level: (4) ID = <10565> Status = 0 0 0 0 ok 2009-Sep-01 05:03:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Sep-01 05:03:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:03:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:03:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:03:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:03:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Sep-01 05:03:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32591.00 2009-Sep-01 05:03:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:03:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:03:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:03:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:03:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:03:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:03:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:03:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:03:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:03:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:03:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:03:21 LOG5 end_task: Level: (4) ID = <10565> Status = 0 0 0 0 ok 2009-Sep-01 05:03:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:03:21 LOG5 end_task: Level: (3) ID = <10564> Status = 0 0 0 0 ok 2009-Sep-01 05:03:21 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Sep-01 05:03:21 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Sep-01 05:03:21 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Sep-01 05:03:21 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:03:21 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:03:21 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:03:21 LOG2 antvel: Parameters to Doppler: Topocentric 32601 2009 244 0.0 2009-Sep-01 05:03:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:03:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Sep-01 05:03:21 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Sep-01 05:03:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:03:21 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:03:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Sep-01 05:03:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:03:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Sep-01 05:03:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:03:21 LOG5 begin_task: Level: (3) ID = <10566> Status = 0 0 0 0 ok 2009-Sep-01 05:03:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Sep-01 05:03:21 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.316393 2009.6686123469465 18.999933 2009-Sep-01 05:03:21 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777812 0.851944444444449 2009-Sep-01 05:03:21 LOG4 log_alfabeam: ALFABEAM 1 3.239261277260230 0.957462612778098 2009-Sep-01 05:03:21 LOG4 log_alfabeam: ALFABEAM 2 3.234414746815502 0.891615497787454 2009-Sep-01 05:03:21 LOG4 log_alfabeam: ALFABEAM 3 3.235158987107013 0.786050353782309 2009-Sep-01 05:03:21 LOG4 log_alfabeam: ALFABEAM 4 3.240807761798731 0.746431823693201 2009-Sep-01 05:03:21 LOG4 log_alfabeam: ALFABEAM 5 3.245664352133933 0.812666031543384 2009-Sep-01 05:03:21 LOG4 log_alfabeam: ALFABEAM 6 3.244862120553696 0.918129958812195 2009-Sep-01 05:03:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400080 2009-Sep-01 05:03:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:03:22 LOG5 begin_task: Level: (4) ID = <10567> Status = 0 0 0 0 ok 2009-Sep-01 05:03:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:03:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Sep-01 05:03:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:03:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:03:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:03:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Sep-01 05:03:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32603.00 2009-Sep-01 05:03:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:03:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:03:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:03:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:03:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:03:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:03:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:03:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:03:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:03:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:03:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:03:33 LOG5 end_task: Level: (4) ID = <10567> Status = 0 0 0 0 ok 2009-Sep-01 05:03:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:03:33 LOG5 end_task: Level: (3) ID = <10566> Status = 0 0 0 0 ok 2009-Sep-01 05:03:33 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Sep-01 05:03:33 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Sep-01 05:03:33 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Sep-01 05:03:33 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:03:33 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:03:33 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:03:33 LOG2 antvel: Parameters to Doppler: Topocentric 32613 2009 244 0.0 2009-Sep-01 05:03:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:03:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Sep-01 05:03:33 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Sep-01 05:03:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:03:33 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:03:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Sep-01 05:03:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:03:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Sep-01 05:03:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:03:33 LOG5 begin_task: Level: (3) ID = <10568> Status = 0 0 0 0 ok 2009-Sep-01 05:03:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Sep-01 05:03:33 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.319735 2009.6686127272037 18.999933 2009-Sep-01 05:03:33 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777835 0.851944444444449 2009-Sep-01 05:03:33 LOG4 log_alfabeam: ALFABEAM 1 3.239280676106555 0.957493906742734 2009-Sep-01 05:03:33 LOG4 log_alfabeam: ALFABEAM 2 3.234422058371794 0.891847415980648 2009-Sep-01 05:03:33 LOG4 log_alfabeam: ALFABEAM 3 3.235146895937568 0.786251906664253 2009-Sep-01 05:03:33 LOG4 log_alfabeam: ALFABEAM 4 3.240788362598994 0.746399971248432 2009-Sep-01 05:03:33 LOG4 log_alfabeam: ALFABEAM 5 3.245657108302223 0.812433069137020 2009-Sep-01 05:03:33 LOG4 log_alfabeam: ALFABEAM 6 3.244874271662376 0.917929777535674 2009-Sep-01 05:03:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400081 2009-Sep-01 05:03:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:03:34 LOG5 begin_task: Level: (4) ID = <10569> Status = 0 0 0 0 ok 2009-Sep-01 05:03:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:03:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Sep-01 05:03:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:03:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:03:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:03:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Sep-01 05:03:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32615.00 2009-Sep-01 05:03:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:03:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:03:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:03:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:03:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:03:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:03:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:03:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:03:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:03:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:03:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:03:45 LOG5 end_task: Level: (4) ID = <10569> Status = 0 0 0 0 ok 2009-Sep-01 05:03:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:03:45 LOG5 end_task: Level: (3) ID = <10568> Status = 0 0 0 0 ok 2009-Sep-01 05:03:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Sep-01 05:03:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Sep-01 05:03:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Sep-01 05:03:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 05:03:45 LOG5 begin_task: Level: (3) ID = <10570> Status = 0 0 0 0 ok 2009-Sep-01 05:03:45 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 05:03:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Sep-01 05:03:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 05:03:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 05:03:45 LOG5 end_task: Level: (3) ID = <10570> Status = 0 0 0 0 ok 2009-Sep-01 05:03:45 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Sep-01 05:03:45 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Sep-01 05:03:45 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Sep-01 05:03:45 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:03:45 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:03:45 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:03:45 LOG2 antvel: Parameters to Doppler: Topocentric 32625 2009 244 0.0 2009-Sep-01 05:03:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:03:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Sep-01 05:03:45 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Sep-01 05:03:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:03:45 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:03:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Sep-01 05:03:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:03:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Sep-01 05:03:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:03:45 LOG5 begin_task: Level: (3) ID = <10571> Status = 0 0 0 0 ok 2009-Sep-01 05:03:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Sep-01 05:03:45 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.323078 2009.6686131074607 18.999933 2009-Sep-01 05:03:45 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777801 0.851944444444443 2009-Sep-01 05:03:45 LOG4 log_alfabeam: ALFABEAM 1 3.239300079691687 0.957524397091230 2009-Sep-01 05:03:45 LOG4 log_alfabeam: ALFABEAM 2 3.234429412090917 0.892079018860770 2009-Sep-01 05:03:45 LOG4 log_alfabeam: ALFABEAM 3 3.235134842549951 0.786453948173934 2009-Sep-01 05:03:45 LOG4 log_alfabeam: ALFABEAM 4 3.240768958445022 0.746368922522751 2009-Sep-01 05:03:45 LOG4 log_alfabeam: ALFABEAM 5 3.245649821902407 0.812200416170937 2009-Sep-01 05:03:45 LOG4 log_alfabeam: ALFABEAM 6 3.244886385514855 0.917729102351264 2009-Sep-01 05:03:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400082 2009-Sep-01 05:03:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:03:46 LOG5 begin_task: Level: (4) ID = <10572> Status = 0 0 0 0 ok 2009-Sep-01 05:03:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:03:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Sep-01 05:03:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:03:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:03:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:03:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Sep-01 05:03:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32627.00 2009-Sep-01 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:03:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:03:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:03:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:03:57 LOG5 end_task: Level: (4) ID = <10572> Status = 0 0 0 0 ok 2009-Sep-01 05:03:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:03:57 LOG5 end_task: Level: (3) ID = <10571> Status = 0 0 0 0 ok 2009-Sep-01 05:03:57 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Sep-01 05:03:57 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Sep-01 05:03:57 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Sep-01 05:03:57 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:03:57 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:03:57 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:03:57 LOG2 antvel: Parameters to Doppler: Topocentric 32637 2009 244 0.0 2009-Sep-01 05:03:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:03:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Sep-01 05:03:57 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Sep-01 05:03:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:03:57 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:03:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Sep-01 05:03:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:03:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Sep-01 05:03:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:03:57 LOG5 begin_task: Level: (3) ID = <10573> Status = 0 0 0 0 ok 2009-Sep-01 05:03:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Sep-01 05:03:57 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.326420 2009.6686134877177 18.999933 2009-Sep-01 05:03:57 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777789 0.851944444444441 2009-Sep-01 05:03:57 LOG4 log_alfabeam: ALFABEAM 1 3.239319475945738 0.957554065721984 2009-Sep-01 05:03:57 LOG4 log_alfabeam: ALFABEAM 2 3.234436803354918 0.892310162766571 2009-Sep-01 05:03:57 LOG4 log_alfabeam: ALFABEAM 3 3.235122834398144 0.786656352150379 2009-Sep-01 05:03:57 LOG4 log_alfabeam: ALFABEAM 4 3.240749561407195 0.746338695978948 2009-Sep-01 05:03:57 LOG4 log_alfabeam: ALFABEAM 5 3.245642497509324 0.811968216991641 2009-Sep-01 05:03:57 LOG4 log_alfabeam: ALFABEAM 6 3.244898454617525 0.917528058541263 2009-Sep-01 05:03:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400083 2009-Sep-01 05:03:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:03:58 LOG5 begin_task: Level: (4) ID = <10574> Status = 0 0 0 0 ok 2009-Sep-01 05:03:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:03:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Sep-01 05:03:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:03:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:03:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:03:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Sep-01 05:03:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32639.00 2009-Sep-01 05:04:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:04:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:04:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:04:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:04:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:04:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:04:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:04:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:04:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:04:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:04:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:04:09 LOG5 end_task: Level: (4) ID = <10574> Status = 0 0 0 0 ok 2009-Sep-01 05:04:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:04:09 LOG5 end_task: Level: (3) ID = <10573> Status = 0 0 0 0 ok 2009-Sep-01 05:04:09 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Sep-01 05:04:09 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Sep-01 05:04:09 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Sep-01 05:04:09 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:04:09 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:04:09 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:04:09 LOG2 antvel: Parameters to Doppler: Topocentric 32649 2009 244 0.0 2009-Sep-01 05:04:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:04:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Sep-01 05:04:09 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Sep-01 05:04:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:04:09 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:04:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Sep-01 05:04:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:04:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Sep-01 05:04:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:04:09 LOG5 begin_task: Level: (3) ID = <10575> Status = 0 0 0 0 ok 2009-Sep-01 05:04:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Sep-01 05:04:09 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.329762 2009.6686138679747 18.999933 2009-Sep-01 05:04:09 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777805 0.851944444444445 2009-Sep-01 05:04:09 LOG4 log_alfabeam: ALFABEAM 1 3.239338870212419 0.957582922074985 2009-Sep-01 05:04:09 LOG4 log_alfabeam: ALFABEAM 2 3.234444234136700 0.892540911969055 2009-Sep-01 05:04:09 LOG4 log_alfabeam: ALFABEAM 3 3.235110868109941 0.786859173657011 2009-Sep-01 05:04:09 LOG4 log_alfabeam: ALFABEAM 4 3.240730166142104 0.746309282036968 2009-Sep-01 05:04:09 LOG4 log_alfabeam: ALFABEAM 5 3.245635133167495 0.811736407072277 2009-Sep-01 05:04:09 LOG4 log_alfabeam: ALFABEAM 6 3.244910482357206 0.917326591391289 2009-Sep-01 05:04:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400084 2009-Sep-01 05:04:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:04:10 LOG5 begin_task: Level: (4) ID = <10576> Status = 0 0 0 0 ok 2009-Sep-01 05:04:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:04:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Sep-01 05:04:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:04:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:04:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:04:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Sep-01 05:04:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32651.00 2009-Sep-01 05:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:04:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:04:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:04:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:04:21 LOG5 end_task: Level: (4) ID = <10576> Status = 0 0 0 0 ok 2009-Sep-01 05:04:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:04:21 LOG5 end_task: Level: (3) ID = <10575> Status = 0 0 0 0 ok 2009-Sep-01 05:04:21 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Sep-01 05:04:21 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Sep-01 05:04:21 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Sep-01 05:04:21 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:04:21 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:04:21 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:04:21 LOG2 antvel: Parameters to Doppler: Topocentric 32661 2009 244 0.0 2009-Sep-01 05:04:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:04:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Sep-01 05:04:21 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Sep-01 05:04:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:04:21 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:04:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Sep-01 05:04:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:04:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Sep-01 05:04:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:04:21 LOG5 begin_task: Level: (3) ID = <10577> Status = 0 0 0 0 ok 2009-Sep-01 05:04:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Sep-01 05:04:21 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.333105 2009.668614248232 18.999933 2009-Sep-01 05:04:21 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777818 0.851944444444448 2009-Sep-01 05:04:21 LOG4 log_alfabeam: ALFABEAM 1 3.239358267833685 0.957610974676101 2009-Sep-01 05:04:21 LOG4 log_alfabeam: ALFABEAM 2 3.234451706453598 0.892771330300683 2009-Sep-01 05:04:21 LOG4 log_alfabeam: ALFABEAM 3 3.235098940359802 0.787062468232882 2009-Sep-01 05:04:21 LOG4 log_alfabeam: ALFABEAM 4 3.240710767307518 0.746280672031183 2009-Sep-01 05:04:21 LOG4 log_alfabeam: ALFABEAM 5 3.245627726876352 0.811504922318430 2009-Sep-01 05:04:21 LOG4 log_alfabeam: ALFABEAM 6 3.244922472074311 0.917124645704886 2009-Sep-01 05:04:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400085 2009-Sep-01 05:04:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:04:22 LOG5 begin_task: Level: (4) ID = <10578> Status = 0 0 0 0 ok 2009-Sep-01 05:04:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:04:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Sep-01 05:04:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:04:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:04:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:04:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Sep-01 05:04:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32663.00 2009-Sep-01 05:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:04:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:04:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:04:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:04:33 LOG5 end_task: Level: (4) ID = <10578> Status = 0 0 0 0 ok 2009-Sep-01 05:04:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:04:33 LOG5 end_task: Level: (3) ID = <10577> Status = 0 0 0 0 ok 2009-Sep-01 05:04:33 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Sep-01 05:04:33 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Sep-01 05:04:33 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Sep-01 05:04:33 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:04:33 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66861 J 2009-Sep-01 05:04:33 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:04:33 LOG2 antvel: Parameters to Doppler: Topocentric 32673 2009 244 0.0 2009-Sep-01 05:04:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:04:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Sep-01 05:04:33 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Sep-01 05:04:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:04:33 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:04:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Sep-01 05:04:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:04:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Sep-01 05:04:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:04:33 LOG5 begin_task: Level: (3) ID = <10579> Status = 0 0 0 0 ok 2009-Sep-01 05:04:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Sep-01 05:04:33 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.336447 2009.668614628489 18.999933 2009-Sep-01 05:04:33 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777795 0.851944444444442 2009-Sep-01 05:04:33 LOG4 log_alfabeam: ALFABEAM 1 3.239377656745037 0.957638207056188 2009-Sep-01 05:04:33 LOG4 log_alfabeam: ALFABEAM 2 3.234459215609084 0.893001274910532 2009-Sep-01 05:04:33 LOG4 log_alfabeam: ALFABEAM 3 3.235087058516736 0.787266108895142 2009-Sep-01 05:04:33 LOG4 log_alfabeam: ALFABEAM 4 3.240691376968909 0.746252882791124 2009-Sep-01 05:04:33 LOG4 log_alfabeam: ALFABEAM 5 3.245620283290242 0.811273906277388 2009-Sep-01 05:04:33 LOG4 log_alfabeam: ALFABEAM 6 3.244934416359162 0.916922347598704 2009-Sep-01 05:04:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400086 2009-Sep-01 05:04:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:04:34 LOG5 begin_task: Level: (4) ID = <10580> Status = 0 0 0 0 ok 2009-Sep-01 05:04:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:04:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Sep-01 05:04:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:04:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:04:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:04:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Sep-01 05:04:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32675.00 2009-Sep-01 05:04:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:04:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:04:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:04:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:04:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:04:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:04:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:04:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:04:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:04:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:04:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:04:45 LOG5 end_task: Level: (4) ID = <10580> Status = 0 0 0 0 ok 2009-Sep-01 05:04:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:04:45 LOG5 end_task: Level: (3) ID = <10579> Status = 0 0 0 0 ok 2009-Sep-01 05:04:45 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Sep-01 05:04:45 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Sep-01 05:04:45 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Sep-01 05:04:45 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:04:45 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66862 J 2009-Sep-01 05:04:45 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:04:45 LOG2 antvel: Parameters to Doppler: Topocentric 32685 2009 244 0.0 2009-Sep-01 05:04:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:04:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Sep-01 05:04:45 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Sep-01 05:04:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:04:45 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:04:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Sep-01 05:04:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:04:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Sep-01 05:04:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:04:45 LOG5 begin_task: Level: (3) ID = <10581> Status = 0 0 0 0 ok 2009-Sep-01 05:04:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Sep-01 05:04:45 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.339790 2009.668615008746 18.999933 2009-Sep-01 05:04:45 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777789 0.851944444444442 2009-Sep-01 05:04:45 LOG4 log_alfabeam: ALFABEAM 1 3.239397048090871 0.957664635884001 2009-Sep-01 05:04:45 LOG4 log_alfabeam: ALFABEAM 2 3.234466765868159 0.893230878440831 2009-Sep-01 05:04:45 LOG4 log_alfabeam: ALFABEAM 3 3.235075215699990 0.787470212127593 2009-Sep-01 05:04:45 LOG4 log_alfabeam: ALFABEAM 4 3.240671983981559 0.746225897341514 2009-Sep-01 05:04:45 LOG4 log_alfabeam: ALFABEAM 5 3.245612798180786 0.811043225724378 2009-Sep-01 05:04:45 LOG4 log_alfabeam: ALFABEAM 6 3.244946322126376 0.916719581333631 2009-Sep-01 05:04:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400087 2009-Sep-01 05:04:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:04:46 LOG5 begin_task: Level: (4) ID = <10582> Status = 0 0 0 0 ok 2009-Sep-01 05:04:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:04:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Sep-01 05:04:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:04:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:04:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:04:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Sep-01 05:04:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32687.00 2009-Sep-01 05:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:04:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:04:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:04:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:04:57 LOG5 end_task: Level: (4) ID = <10582> Status = 0 0 0 0 ok 2009-Sep-01 05:04:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:04:57 LOG5 end_task: Level: (3) ID = <10581> Status = 0 0 0 0 ok 2009-Sep-01 05:04:57 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Sep-01 05:04:57 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Sep-01 05:04:57 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Sep-01 05:04:57 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:04:57 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66862 J 2009-Sep-01 05:04:57 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:04:57 LOG2 antvel: Parameters to Doppler: Topocentric 32697 2009 244 0.0 2009-Sep-01 05:04:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:04:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Sep-01 05:04:57 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Sep-01 05:04:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:04:57 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:04:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Sep-01 05:04:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:04:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Sep-01 05:04:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Sep-01 05:04:57 LOG5 begin_task: Level: (3) ID = <10583> Status = 0 0 0 0 ok 2009-Sep-01 05:04:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Sep-01 05:04:57 LOG5 log_alfabeam: Parameters: 3.2400277777777773 0.85194444444444439 3.343132 2009.668615389003 18.999933 2009-Sep-01 05:04:57 LOG4 log_alfabeam: ALFABEAM 0 3.240027777777763 0.851944444444439 2009-Sep-01 05:04:57 LOG4 log_alfabeam: ALFABEAM 1 3.239416429812038 0.957690245777278 2009-Sep-01 05:04:57 LOG4 log_alfabeam: ALFABEAM 2 3.234474352482533 0.893459998598580 2009-Sep-01 05:04:57 LOG4 log_alfabeam: ALFABEAM 3 3.235063419220983 0.787674650418828 2009-Sep-01 05:04:57 LOG4 log_alfabeam: ALFABEAM 4 3.240652600405813 0.746199731424411 2009-Sep-01 05:04:57 LOG4 log_alfabeam: ALFABEAM 5 3.245605276254481 0.810813023655924 2009-Sep-01 05:04:57 LOG4 log_alfabeam: ALFABEAM 6 3.244958182023024 0.916516473563285 2009-Sep-01 05:04:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 924400088 2009-Sep-01 05:04:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Sep-01 05:04:58 LOG5 begin_task: Level: (4) ID = <10584> Status = 0 0 0 0 ok 2009-Sep-01 05:04:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Sep-01 05:04:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Sep-01 05:04:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:04:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:04:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:04:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Sep-01 05:04:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 32699.00 2009-Sep-01 05:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Sep-01 05:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.769584 MHz 2009-Sep-01 05:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.601322 MHz 2009-Sep-01 05:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.644216 MHz 2009-Sep-01 05:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1000.000000 MHz 2009-Sep-01 05:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 900.000000 MHz 2009-Sep-01 05:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1160.000000 MHz 2009-Sep-01 05:05:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 800.000000 MHz 2009-Sep-01 05:05:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Sep-01 05:05:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Sep-01 05:05:09 LOG5 end_task: Level: (4) ID = <10584> Status = 0 0 0 0 ok 2009-Sep-01 05:05:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Sep-01 05:05:09 LOG5 end_task: Level: (3) ID = <10583> Status = 0 0 0 0 ok 2009-Sep-01 05:05:09 INFO2 smartfreq: Switching off CAL 2009-Sep-01 05:05:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Sep-01 05:05:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Sep-01 05:05:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Sep-01 05:05:09 LOG5 begin_task: Level: (3) ID = <10585> Status = 0 0 0 0 ok 2009-Sep-01 05:05:09 LOG3 CALCONTROL-caltrig: Software trigger 2009-Sep-01 05:05:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Sep-01 05:05:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Sep-01 05:05:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Sep-01 05:05:09 LOG5 end_task: Level: (3) ID = <10585> Status = 0 0 0 0 ok 2009-Sep-01 05:05:09 INFO3 restore_frequencies: Restoring original frequencies 2009-Sep-01 05:05:09 LOG5 antvel: Calling 'antvel 31424.100000 5107.000000 J Topocentric 0' 2009-Sep-01 05:05:09 LOG2 antvel: Precessing RA = 03:14:24.1 Dec = +00:51:07.0 Epoch = 2009.66862 J 2009-Sep-01 05:05:09 LOG2 antvel: Computed apparent RA = 03:14:55.4 Dec = +00:53:30.1 2009-Sep-01 05:05:09 LOG2 antvel: Parameters to Doppler: Topocentric 32709 2009 244 0.0 2009-Sep-01 05:05:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Sep-01 05:05:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Sep-01 05:05:09 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Sep-01 05:05:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Sep-01 05:05:09 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Sep-01 05:05:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Sep-01 05:05:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:05:09 STOP finish_task: Finishing task 'smart frequency switching' 2009-Sep-01 05:05:09 LOG5 finish_task: Level: (2) ID = <10516> Status = 0 0 0 0 ok 2009-Sep-01 05:05:09 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Sep-01 05:05:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Sep-01 05:05:09 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Sep-01 05:05:09 LOG5 end_task: Level: (2) ID = <10516> Status = 0 0 0 0 ok 2009-Sep-01 05:05:09 NOTE run_command_file: DONE with command file processing 2009-Sep-01 05:05:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Sep-01 05:05:09 STOP finish_task: Finishing task 'running command file 'command_galfacurpos09.cmd'' 2009-Sep-01 05:05:09 LOG5 finish_task: Level: (1) ID = <10500> Status = 0 0 0 0 ok 2009-Sep-01 05:05:09 DONE finish_task: DONE finished running: command file 'command_galfacurpos09.cmd' 2009-Sep-01 05:05:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Sep-01 05:05:10 END end_task: Finishing task 'running command file 'command_galfacurpos09.cmd'' with status 'OK' 2009-Sep-01 05:05:10 LOG5 end_task: Level: (1) ID = <10500> Status = 0 0 0 0 ok 2009-Sep-01 05:05:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Sep-01 05:05:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Sep-01 05:05:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:05:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:05:19 ALERT CIMA-exit_cima: Exiting CIMA ... 2009-Sep-01 05:05:19 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2009-Sep-01 05:05:19 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2010} 2009-Sep-01 05:05:19 LOG3 vw_send: To DATATAKING: mvdata a2010 2009-Sep-01 05:05:19 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2009-Sep-01 05:05:19 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2009-Sep-01 05:05:19 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2009-Sep-01 05:05:19 NOTE CIMA-exit_cima: Cleaning up session ... 2009-Sep-01 05:05:19 LOG4 got_cormsg: From DATATAKING: mvdata a2010 2009-Sep-01 05:05:19 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2009-Sep-01 05:05:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:05:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Sep-01 05:05:21 LOG3 exec_msg: Closing socket