2008-Aug-29 00:27:30 BEGIN executive: CIMA executive starting ... 2008-Aug-29 00:27:31 NOTE executive: STARTING NEW CIMA SESSION 2008-Aug-29 00:27:31 INFO1 executive: Using CIMA version 3.0.00 'next' from 2008-06-12 15:50 2008-Aug-29 00:27:31 INFO4 executive: This is an ON-LINE session 2008-Aug-29 00:27:31 INFO4 executive: This is a REMOTE session 2008-Aug-29 00:27:31 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Aug-29 00:27:31 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Ann Martin' 2008-Aug-29 00:27:31 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20080829' 2008-Aug-29 00:27:31 LOG2 log_preferences: Currently applied preferences: 2008-Aug-29 00:27:31 LOG2 log_preferences: prefs(dailylog) = daily 2008-Aug-29 00:27:31 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Aug-29 00:27:31 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Aug-29 00:27:31 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Aug-29 00:27:31 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Aug-29 00:27:31 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Aug-29 00:27:31 LOG2 log_preferences: prefs(logcolours) = full 2008-Aug-29 00:27:31 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Aug-29 00:27:31 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Aug-29 00:27:31 LOG2 log_preferences: prefs(displayformat) = long 2008-Aug-29 00:27:31 LOG2 log_preferences: prefs(logformat) = new 2008-Aug-29 00:27:31 LOG2 log_preferences: prefs(fontsize) = 3 2008-Aug-29 00:27:31 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Aug-29 00:27:31 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Aug-29 00:27:31 ALERT executive: CIMA executive ready 2008-Aug-29 00:27:34 NOTE frontend: CIMA frontend ready 2008-Aug-29 00:27:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:27:35 LOG4 got_cormsg: From DATATAKING: setup 2008-Aug-29 00:27:40 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Aug-29 00:27:40 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Aug-29 00:27:40 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Aug-29 00:27:40 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Aug-29 00:27:40 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Aug-29 00:27:40 NOTE select_receiver: Starting to select receiver ALFA 2008-Aug-29 00:27:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Aug-29 00:27:40 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Aug-29 00:27:40 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Aug-29 00:27:40 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Aug-29 00:27:40 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Aug-29 00:27:40 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Aug-29 00:27:40 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Aug-29 00:27:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-29 00:27:40 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Aug-29 00:27:40 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Aug-29 00:27:41 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Aug-29 00:27:41 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Aug-29 00:27:41 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Aug-29 00:27:41 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Aug-29 00:27:41 LOG4 got_cormsg: From DATATAKING: 2008-Aug-29 00:27:41 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Aug-29 00:27:41 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Aug-29 00:27:41 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Aug-29 00:27:41 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Aug-29 00:27:41 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Aug-29 00:27:41 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Aug-29 00:27:41 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Aug-29 00:27:41 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Aug-29 00:27:41 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Aug-29 00:27:41 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Aug-29 00:27:42 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Aug-29 00:27:42 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Aug-29 00:27:42 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Aug-29 00:27:42 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Aug-29 00:27:42 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Aug-29 00:27:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:27:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:27:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:27:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:28:47 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Aug-29 00:28:47 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Aug-29 00:28:47 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Aug-29 00:28:47 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Aug-29 00:28:47 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Aug-29 00:28:47 NOTE restart_wapp: Restarting all WAPPs 2008-Aug-29 00:28:47 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Aug-29 00:28:47 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Aug-29 00:28:47 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Aug-29 00:28:47 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Aug-29 00:28:49 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Aug-29 00:28:50 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Aug-29 00:28:50 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Aug-29 00:28:50 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Aug-29 00:29:04 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Aug-29 00:29:05 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-29 00:29:06 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Aug-29 00:29:06 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Aug-29 00:29:06 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Aug-29 00:29:06 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Aug-29 00:29:06 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Aug-29 00:29:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Aug-29 00:29:06 INFO1 config_iflo: Selecting receiver ALFA 2008-Aug-29 00:29:06 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Aug-29 00:29:06 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Aug-29 00:29:06 START begin_task: Starting task 'selecting receiver ALFA' 2008-Aug-29 00:29:06 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Aug-29 00:29:06 NOTE select_receiver: Starting to select receiver ALFA 2008-Aug-29 00:29:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Aug-29 00:29:06 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Aug-29 00:29:06 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Aug-29 00:29:06 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Aug-29 00:29:07 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Aug-29 00:29:07 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Aug-29 00:29:07 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Aug-29 00:29:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 00:29:07 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Aug-29 00:29:07 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Aug-29 00:29:07 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Aug-29 00:29:07 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Aug-29 00:29:07 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Aug-29 00:29:07 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Aug-29 00:29:07 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Aug-29 00:29:07 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Aug-29 00:29:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 00:29:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 00:29:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 00:29:07 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Aug-29 00:29:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 00:29:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 00:29:07 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Aug-29 00:29:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 00:29:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Aug-29 00:29:07 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Aug-29 00:29:07 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Aug-29 00:29:07 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Aug-29 00:29:07 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Aug-29 00:29:07 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Aug-29 00:29:07 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Aug-29 00:29:07 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Aug-29 00:29:07 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Aug-29 00:29:07 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Aug-29 00:29:07 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Aug-29 00:29:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Aug-29 00:29:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 00:29:07 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Aug-29 00:29:07 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Aug-29 00:29:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 00:29:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:23 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 00:29:23 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Aug-29 00:29:23 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Aug-29 00:29:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Aug-29 00:29:23 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Aug-29 00:29:23 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Aug-29 00:29:23 DONE finish_task: DONE finished configuration: IF/LO path 2008-Aug-29 00:29:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-29 00:29:23 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Aug-29 00:29:23 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Aug-29 00:29:23 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Aug-29 00:29:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Aug-29 00:29:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Aug-29 00:29:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Aug-29 00:29:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Aug-29 00:29:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Aug-29 00:29:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Aug-29 00:29:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Aug-29 00:29:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-29 00:29:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-29 00:29:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-29 00:29:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-29 00:29:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Aug-29 00:29:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Aug-29 00:29:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Aug-29 00:29:24 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Aug-29 00:29:24 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Aug-29 00:29:24 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Aug-29 00:29:24 LOG5 begin_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Aug-29 00:29:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Aug-29 00:29:24 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Aug-29 00:29:24 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Aug-29 00:29:24 START begin_task: Starting task 'selecting calibration port' 2008-Aug-29 00:29:24 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Aug-29 00:29:24 LOG3 vw_send: To DATATAKING: calport 3 2008-Aug-29 00:29:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Aug-29 00:29:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 00:29:24 START begin_task: Starting task 'waiting on calport' 2008-Aug-29 00:29:24 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Aug-29 00:29:24 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Aug-29 00:29:24 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Aug-29 00:29:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 00:29:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:24 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 00:29:24 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Aug-29 00:29:24 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Aug-29 00:29:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Aug-29 00:29:24 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Aug-29 00:29:24 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Aug-29 00:29:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 00:29:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 00:29:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 00:29:24 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Aug-29 00:29:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 00:29:24 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 00:29:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 00:29:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 00:29:24 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Aug-29 00:29:24 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Aug-29 00:29:24 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Aug-29 00:29:24 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Aug-29 00:29:24 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Aug-29 00:29:25 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Aug-29 00:29:25 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Aug-29 00:29:25 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Aug-29 00:29:25 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Aug-29 00:29:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 00:29:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 00:29:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 00:29:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 00:29:25 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Aug-29 00:29:25 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Aug-29 00:29:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 00:29:25 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Aug-29 00:29:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 00:29:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 00:29:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 00:29:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 00:29:25 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Aug-29 00:29:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 00:29:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 00:29:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 00:29:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 00:29:25 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Aug-29 00:29:25 LOG5 finish_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Aug-29 00:29:25 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Aug-29 00:29:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-29 00:29:25 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Aug-29 00:29:25 LOG5 end_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Aug-29 00:29:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 00:29:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Aug-29 00:29:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Aug-29 00:29:25 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Aug-29 00:29:25 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Aug-29 00:29:25 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Aug-29 00:29:25 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Aug-29 00:29:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Aug-29 00:29:25 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Aug-29 00:29:25 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Aug-29 00:29:25 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Aug-29 00:29:25 LOG5 finish_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Aug-29 00:29:25 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Aug-29 00:29:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-29 00:29:25 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Aug-29 00:29:25 LOG5 end_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Aug-29 00:29:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 00:29:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0000.fits 2008-Aug-29 00:29:26 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080829.a2010.0000.fits} 2008-Aug-29 00:29:26 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Aug-29 00:29:26 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Aug-29 00:29:26 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Aug-29 00:29:46 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Aug-29 00:29:46 LOG4 exec_msg: From OBSERVER: track_new_source drift16p1 223400.0 +034618 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Aug-29 00:29:46 LOG1 track_new_source: Calling 'track_new_source drift16p1 223400.0 +034618 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Aug-29 00:29:46 BEGIN begin_task: Starting task 'selecting new source' 2008-Aug-29 00:29:47 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Aug-29 00:29:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift16p1} INFO {Selecting source 'drift16p1' ...} 2008-Aug-29 00:29:47 LOG3 track_source: Calling 'track_source drift16p1 223400.0 +034618 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Aug-29 00:29:47 START begin_task: Starting task 'sending tracking commands' 2008-Aug-29 00:29:47 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Aug-29 00:29:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift16p1} INFO {Slewing to source 'drift16p1' ...} 2008-Aug-29 00:29:47 INFO1 track_source: Starting to track drift16p1 2008-Aug-29 00:29:47 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift16p1" 2008-Aug-29 00:29:47 LOG3 vw_send: To DATATAKING: set ra 223400.0 2008-Aug-29 00:29:47 LOG3 vw_send: To DATATAKING: set dec +034618 2008-Aug-29 00:29:47 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-29 00:29:47 LOG3 vw_send: To DATATAKING: pnt tr 223400.0 +034618 -CJ 2008-Aug-29 00:29:47 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Aug-29 00:29:47 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-29 00:29:47 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Aug-29 00:29:47 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-29 00:29:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 00:29:47 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-29 00:29:47 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Aug-29 00:29:47 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Aug-29 00:29:47 START begin_task: Starting task 'applying pointing corrections' 2008-Aug-29 00:29:47 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Aug-29 00:29:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Aug-29 00:29:47 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Aug-29 00:29:47 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Aug-29 00:29:47 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Aug-29 00:29:47 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Aug-29 00:29:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 00:29:47 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Aug-29 00:29:47 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Aug-29 00:29:47 STOP finish_task: Finishing task 'selecting new source' 2008-Aug-29 00:29:47 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Aug-29 00:29:47 DONE finish_task: DONE finished selecting: new source 2008-Aug-29 00:29:47 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-29 00:29:47 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Aug-29 00:29:47 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Aug-29 00:29:47 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift16p1" 2008-Aug-29 00:29:47 LOG4 got_cormsg: From DATATAKING: set ra 223400.0 2008-Aug-29 00:29:47 LOG4 got_cormsg: From DATATAKING: set dec +034618 2008-Aug-29 00:29:47 LOG4 got_cormsg: From DATATAKING: vw% 223400.0 2008-Aug-29 00:29:47 LOG4 got_cormsg: From DATATAKING: vw% +034618 2008-Aug-29 00:29:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:47 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-29 00:29:47 LOG4 got_cormsg: From DATATAKING: pnt tr 223400.0 +034618 -CJ 2008-Aug-29 00:29:47 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Aug-29 00:29:47 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-29 00:29:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:29:47 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Aug-29 00:29:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:30:26 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2008-Aug-29 00:30:26 LOG4 exec_msg: From OBSERVER: new_file manual 2008-Aug-29 00:30:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 00:30:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 00:30:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 00:30:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 00:30:26 NOTE new_file: There is no need to start a new FITS-file since the current one 'wapp.20080829.a2010.0000.fits' is empty! 2008-Aug-29 00:30:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 00:30:35 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Aug-29 00:30:35 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Aug-29 00:30:35 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Aug-29 00:30:35 LOG5 begin_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Aug-29 00:30:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-29 00:30:35 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-29 00:30:35 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-29 00:30:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-29 00:30:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 00:30:35 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-29 00:30:35 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Aug-29 00:30:35 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-29 00:30:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 00:30:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:30:38 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 00:30:38 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-29 00:30:38 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Aug-29 00:30:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-29 00:30:38 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-29 00:30:38 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Aug-29 00:30:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-29 00:30:38 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-29 00:30:38 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-29 00:30:38 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-29 00:30:38 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-29 00:30:38 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-29 00:30:38 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Aug-29 00:30:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Aug-29 00:30:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:30:39 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Aug-29 00:30:39 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2008-Aug-29 00:30:39 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 3 dB --- beam 5: 5 5 dB 2008-Aug-29 00:30:39 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2008-Aug-29 00:30:39 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-29 00:30:39 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-29 00:30:39 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2008-Aug-29 00:30:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.077 1.098 ALFA beam 1: 1.076 1.060 2008-Aug-29 00:30:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.931 0.948 ALFA beam 3: 1.034 0.904 2008-Aug-29 00:30:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.076 0.899 ALFA beam 5: 1.052 0.943 2008-Aug-29 00:30:39 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.901 0.095 ALFA beam 7: 0.996 0.106 2008-Aug-29 00:30:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-29 00:30:39 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Aug-29 00:30:39 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Aug-29 00:30:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 00:30:39 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-29 00:30:39 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Aug-29 00:30:39 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Aug-29 00:30:39 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-29 00:30:39 LOG5 finish_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Aug-29 00:30:39 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-29 00:30:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-29 00:30:39 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-29 00:30:39 LOG5 end_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Aug-29 00:30:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Aug-29 00:30:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.098 1.076 1.060 2008-Aug-29 00:30:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 0.948 1.034 0.904 2008-Aug-29 00:30:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.899 1.052 0.943 2008-Aug-29 00:30:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.901 0.095 0.996 0.106 2008-Aug-29 00:30:48 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Aug-29 00:30:48 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift16p1 223400.0 +034618 J 0 Topocentric velocity(optical) 2008-Aug-29 00:30:48 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift16p1 223400.0 +034618 J 0 Topocentric velocity(optical)' 2008-Aug-29 00:30:48 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Aug-29 00:30:48 LOG5 begin_task: Level: (1) ID = <10021> Status = 0 0 0 0 ok 2008-Aug-29 00:30:48 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift16p1' 2008-Aug-29 00:30:48 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Aug-29 00:30:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift16p1} 2008-Aug-29 00:30:48 INFO5 fixed_driftmap: Start: year = 2008.662618418384 RA = 22:34:28.3 Dec = +03:49:09.0 2008-Aug-29 00:30:48 NOTE fixed_driftmap: Setting ZA to 14:32:04.7 ... 2008-Aug-29 00:30:48 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 14.53 2008-Aug-29 00:30:48 LOG3 track_source: Calling 'track_source drift16p1 360.0 14.5346336235 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Aug-29 00:30:48 START begin_task: Starting task 'sending tracking commands' 2008-Aug-29 00:30:48 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2008-Aug-29 00:30:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift16p1} INFO {Slewing to source 'drift16p1' ...} 2008-Aug-29 00:30:48 INFO1 track_source: Starting to track drift16p1 2008-Aug-29 00:30:48 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift16p1" 2008-Aug-29 00:30:48 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Aug-29 00:30:48 LOG3 vw_send: To DATATAKING: set dec 14.5346336235 2008-Aug-29 00:30:48 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-29 00:30:48 LOG3 vw_send: To DATATAKING: pnt tr 360.0 14.5346336235 -CF 2008-Aug-29 00:30:48 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Aug-29 00:30:48 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-29 00:30:48 LOG5 finish_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2008-Aug-29 00:30:48 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-29 00:30:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 00:30:48 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-29 00:30:48 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2008-Aug-29 00:30:48 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Aug-29 00:30:48 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Aug-29 00:30:48 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Aug-29 00:30:48 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Aug-29 00:30:48 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Aug-29 00:30:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Aug-29 00:30:48 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Aug-29 00:30:48 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Aug-29 00:30:48 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift16p1" 2008-Aug-29 00:30:48 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Aug-29 00:30:48 LOG4 got_cormsg: From DATATAKING: set dec 14.5346336235 2008-Aug-29 00:30:48 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Aug-29 00:30:48 LOG4 got_cormsg: From DATATAKING: vw% 14.5346336235 2008-Aug-29 00:30:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:30:48 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-29 00:30:48 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 14.5346336235 -CF 2008-Aug-29 00:30:48 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Aug-29 00:30:48 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-29 00:30:48 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:30:49 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Aug-29 00:30:49 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Aug-29 00:30:49 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Aug-29 00:30:49 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2008-Aug-29 00:30:49 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-29 00:30:49 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Aug-29 00:30:49 LOG5 finish_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Aug-29 00:30:49 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Aug-29 00:30:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 00:30:49 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Aug-29 00:30:49 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Aug-29 00:30:49 START begin_task: Starting task 'waiting on telescope' 2008-Aug-29 00:30:49 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Aug-29 00:30:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-29 00:30:49 LOG3 waittrk: Start waittrk 5 2008-Aug-29 00:30:49 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-29 00:30:49 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Aug-29 00:30:54 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-29 00:30:54 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2008-Aug-29 00:30:54 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-29 00:30:54 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Aug-29 00:31:03 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-29 00:31:03 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2008-Aug-29 00:31:03 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-29 00:31:03 INFO2 waittrk: Now tracking drift16p1 2008-Aug-29 00:31:03 LOG4 waittrk: Current telescope position: Az = 359.65 ZA = 14.51 2008-Aug-29 00:31:03 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-29 00:31:03 LOG5 finish_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Aug-29 00:31:03 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-29 00:31:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 00:31:03 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-29 00:31:03 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2008-Aug-29 00:31:03 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 00:31:03 LOG5 begin_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Aug-29 00:31:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 00:31:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 00:31:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 00:31:03 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 00:31:03 LOG5 begin_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Aug-29 00:31:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 00:31:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 00:31:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:31:03 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 00:31:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 00:31:03 LOG5 end_task: Level: (3) ID = <10029> Status = 0 0 0 0 ok 2008-Aug-29 00:31:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 00:31:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 00:31:03 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 00:31:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 00:31:03 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Aug-29 00:31:03 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:31:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 00:31:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 00:31:03 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2008-Aug-29 00:31:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 00:31:03 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 00:31:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 00:31:03 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 00:31:03 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 00:31:03 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Aug-29 00:31:03 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 00:31:03 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 00:31:03 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2008-Aug-29 00:31:03 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 00:31:03 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 00:31:03 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 00:31:03 LOG5 end_task: Level: (2) ID = <10028> Status = 0 0 0 0 ok 2008-Aug-29 00:31:03 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Aug-29 00:31:03 INFO3 dopset_later: Setting Doppler correction now 2008-Aug-29 00:31:03 LOG5 antvel: Calling 'antvel 360.000000 14.534634 F 0' 2008-Aug-29 00:31:03 LOG2 antvel: Transforming current Az = 360.00 ZA = 14.53 to apparent RA = 22:35:03.2 Dec = +03:49:09.0 2008-Aug-29 00:31:03 LOG2 antvel: Parameters to Doppler: Topocentric 16263 2008 242 0.0 2008-Aug-29 00:31:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 00:31:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Aug-29 00:31:03 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Aug-29 00:31:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 00:31:03 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 00:31:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-29 00:31:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 00:31:03 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-29 00:31:03 LOG5 begin_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Aug-29 00:31:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-29 00:31:03 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-29 00:31:03 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-29 00:31:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-29 00:31:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 00:31:04 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-29 00:31:04 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Aug-29 00:31:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-29 00:31:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 00:31:04 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-29 00:31:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 00:31:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:31:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:31:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:31:07 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 00:31:07 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-29 00:31:07 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2008-Aug-29 00:31:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-29 00:31:07 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-29 00:31:07 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Aug-29 00:31:07 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-29 00:31:07 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-29 00:31:07 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-29 00:31:07 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-29 00:31:07 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-29 00:31:07 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-29 00:31:07 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Aug-29 00:31:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Aug-29 00:31:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:31:08 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Aug-29 00:31:08 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2008-Aug-29 00:31:08 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 3 dB --- beam 5: 5 5 dB 2008-Aug-29 00:31:08 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2008-Aug-29 00:31:08 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-29 00:31:08 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-29 00:31:08 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2008-Aug-29 00:31:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.076 1.096 ALFA beam 1: 1.076 1.063 2008-Aug-29 00:31:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.928 0.950 ALFA beam 3: 1.057 0.927 2008-Aug-29 00:31:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.097 0.918 ALFA beam 5: 1.049 0.946 2008-Aug-29 00:31:08 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.925 0.097 ALFA beam 7: 1.011 0.108 2008-Aug-29 00:31:08 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-29 00:31:08 LOG5 finish_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Aug-29 00:31:08 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Aug-29 00:31:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 00:31:08 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-29 00:31:08 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Aug-29 00:31:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 00:31:08 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-29 00:31:08 LOG5 finish_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Aug-29 00:31:08 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-29 00:31:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 00:31:08 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-29 00:31:08 LOG5 end_task: Level: (2) ID = <10032> Status = 0 0 0 0 ok 2008-Aug-29 00:31:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 00:31:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 00:31:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 00:31:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 00:31:08 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080829.a2010.0000.fits' is empty! 2008-Aug-29 00:31:08 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 22:34:28.3 LST = 22:35:08.3 diff = -39.9 secs 2008-Aug-29 00:31:08 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Aug-29 00:31:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Aug-29 00:31:08 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Aug-29 00:31:08 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 00:31:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 00:31:08 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 00:31:08 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 00:31:08 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Aug-29 00:31:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 00:31:08 INFO2 take_data: Starting WAPP scan: 824200001 2008-Aug-29 00:31:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 00:31:09 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 00:31:09 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Aug-29 00:31:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 00:31:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 00:31:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16270.00 2008-Aug-29 00:31:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 00:31:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:31:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:31:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:31:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:31:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:31:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:31:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:31:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 00:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:31:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:31:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.098 1.079 1.065 2008-Aug-29 00:31:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.927 0.952 1.054 0.923 2008-Aug-29 00:31:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.919 1.052 0.948 2008-Aug-29 00:31:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.097 1.011 0.109 2008-Aug-29 00:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 00:32:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 00:32:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 1.105 1.077 1.064 2008-Aug-29 00:32:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.929 0.950 1.053 0.925 2008-Aug-29 00:32:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.923 1.052 0.949 2008-Aug-29 00:32:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.098 1.014 0.109 2008-Aug-29 00:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.109 (still bad) 2008-Aug-29 00:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.113 (still bad) 2008-Aug-29 00:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-29 00:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-29 00:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-29 00:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 00:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 00:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 00:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:33:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 00:33:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.097 1.078 1.061 2008-Aug-29 00:33:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.957 1.052 0.924 2008-Aug-29 00:33:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.920 1.054 0.951 2008-Aug-29 00:33:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.098 1.013 0.109 2008-Aug-29 00:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:34:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 00:34:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.095 1.076 1.060 2008-Aug-29 00:34:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 0.953 1.056 0.927 2008-Aug-29 00:34:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.923 1.055 0.952 2008-Aug-29 00:34:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.098 1.013 0.109 2008-Aug-29 00:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:35:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:35:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.094 1.073 1.062 2008-Aug-29 00:35:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 0.950 1.054 0.924 2008-Aug-29 00:35:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.919 1.052 0.950 2008-Aug-29 00:35:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.097 1.013 0.108 2008-Aug-29 00:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:36:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:36:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.096 1.075 1.064 2008-Aug-29 00:36:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 0.951 1.054 0.923 2008-Aug-29 00:36:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.922 1.052 0.949 2008-Aug-29 00:36:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.097 1.013 0.108 2008-Aug-29 00:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.105 (still bad) 2008-Aug-29 00:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.108 (still bad) 2008-Aug-29 00:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.109 (still bad) 2008-Aug-29 00:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.108 (still bad) 2008-Aug-29 00:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 00:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.106 (still bad) 2008-Aug-29 00:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.104 (still bad) 2008-Aug-29 00:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.104 (still bad) 2008-Aug-29 00:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.104 (still bad) 2008-Aug-29 00:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.106 (still bad) 2008-Aug-29 00:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.103 (still bad) 2008-Aug-29 00:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.105 (still bad) 2008-Aug-29 00:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.108 (still bad) 2008-Aug-29 00:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.108 (still bad) 2008-Aug-29 00:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.105 (still bad) 2008-Aug-29 00:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.103 (still bad) 2008-Aug-29 00:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:37:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:37:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.097 1.078 1.061 2008-Aug-29 00:37:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.930 0.952 1.061 0.930 2008-Aug-29 00:37:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.922 1.054 0.950 2008-Aug-29 00:37:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.097 1.014 0.108 2008-Aug-29 00:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.103 (still bad) 2008-Aug-29 00:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:38:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:38:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.098 1.077 1.062 2008-Aug-29 00:38:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 0.953 1.053 0.926 2008-Aug-29 00:38:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.923 1.054 0.950 2008-Aug-29 00:38:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.097 1.015 0.108 2008-Aug-29 00:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:39:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:39:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.095 1.078 1.064 2008-Aug-29 00:39:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 0.955 1.054 0.925 2008-Aug-29 00:39:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.922 1.054 0.949 2008-Aug-29 00:39:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.097 1.012 0.108 2008-Aug-29 00:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.103 (still bad) 2008-Aug-29 00:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.104 (still bad) 2008-Aug-29 00:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.106 (still bad) 2008-Aug-29 00:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.106 (still bad) 2008-Aug-29 00:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.107 (still bad) 2008-Aug-29 00:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.104 (still bad) 2008-Aug-29 00:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.103 (still bad) 2008-Aug-29 00:40:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:40:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.096 1.083 1.063 2008-Aug-29 00:40:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.951 1.053 0.926 2008-Aug-29 00:40:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.927 1.056 0.951 2008-Aug-29 00:40:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.097 1.014 0.109 2008-Aug-29 00:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:41:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 00:41:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 00:41:10 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Aug-29 00:41:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 00:41:10 LOG5 end_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Aug-29 00:41:10 LOG1 fixed_driftmap: New position: year = 2008.6626381600629 RA = 22:44:44.3 RA/Dec = 22:45:12.7 +03:49:12.2 2008-Aug-29 00:41:10 NOTE fixed_driftmap: Correcting ZA to 14:32:01.5 ... 2008-Aug-29 00:41:10 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5337624023 -CF 2008-Aug-29 00:41:10 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 00:41:10 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 00:41:10 LOG5 begin_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2008-Aug-29 00:41:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 00:41:10 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 00:41:10 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Aug-29 00:41:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 00:41:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 00:41:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 00:41:10 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 00:41:10 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Aug-29 00:41:10 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5337624023 -CF 2008-Aug-29 00:41:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:41:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 00:41:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 00:41:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:41:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 00:41:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 00:41:10 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2008-Aug-29 00:41:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 00:41:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 00:41:10 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 00:41:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 00:41:10 LOG5 begin_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Aug-29 00:41:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:41:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 00:41:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 00:41:11 LOG5 end_task: Level: (4) ID = <10041> Status = 0 0 0 0 ok 2008-Aug-29 00:41:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 00:41:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 00:41:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 00:41:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 00:41:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 00:41:11 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Aug-29 00:41:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 00:41:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 00:41:11 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2008-Aug-29 00:41:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 00:41:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 00:41:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 00:41:11 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Aug-29 00:41:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 00:41:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 00:41:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 00:41:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 00:41:11 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Aug-29 00:41:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 00:41:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 00:41:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 00:41:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 00:41:11 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2008-Aug-29 00:41:11 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 00:41:11 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 00:41:11 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 00:41:11 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Aug-29 00:41:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 00:41:11 INFO2 take_data: Starting WAPP scan: 824200002 2008-Aug-29 00:41:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 00:41:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 00:41:11 LOG5 begin_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2008-Aug-29 00:41:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 00:41:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16872.00 2008-Aug-29 00:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 00:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:41:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:41:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 00:41:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 00:41:13 LOG5 end_task: Level: (4) ID = <10045> Status = 0 0 0 0 ok 2008-Aug-29 00:41:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 00:41:13 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2008-Aug-29 00:41:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 00:41:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 00:41:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 00:41:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 00:41:13 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Aug-29 00:41:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 00:41:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 00:41:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 00:41:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 00:41:14 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2008-Aug-29 00:41:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 00:41:14 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 00:41:14 LOG5 finish_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2008-Aug-29 00:41:14 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 00:41:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 00:41:14 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 00:41:14 LOG5 end_task: Level: (2) ID = <10038> Status = 0 0 0 0 ok 2008-Aug-29 00:41:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2008-Aug-29 00:41:14 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Aug-29 00:41:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 00:41:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 00:41:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 00:41:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 00:41:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 00:41:14 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 00:41:14 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 00:41:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 00:41:14 LOG5 begin_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2008-Aug-29 00:41:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 00:41:14 INFO2 take_data: Starting WAPP scan: 824200003 2008-Aug-29 00:41:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 00:41:14 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 00:41:14 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Aug-29 00:41:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 00:41:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 00:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.524 (still bad) 2008-Aug-29 00:41:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16875.00 2008-Aug-29 00:41:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0001.fits 2008-Aug-29 00:41:14 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0001.fits} 2008-Aug-29 00:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 00:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:41:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.524 (still bad) 2008-Aug-29 00:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:41:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:41:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.098 1.109 1.091 2008-Aug-29 00:41:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 0.954 1.053 0.925 2008-Aug-29 00:41:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.925 1.059 0.951 2008-Aug-29 00:41:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.097 1.016 0.109 2008-Aug-29 00:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.115 (still bad) 2008-Aug-29 00:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-29 00:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-29 00:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.107 (still bad) 2008-Aug-29 00:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.105 (still bad) 2008-Aug-29 00:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.104 (still bad) 2008-Aug-29 00:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 00:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.103 (still bad) 2008-Aug-29 00:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.103 (still bad) 2008-Aug-29 00:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.103 (still bad) 2008-Aug-29 00:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 00:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 00:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 00:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 00:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:43:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:43:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.097 1.078 1.064 2008-Aug-29 00:43:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 0.954 1.054 0.926 2008-Aug-29 00:43:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.921 1.059 0.951 2008-Aug-29 00:43:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.097 1.021 0.109 2008-Aug-29 00:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.103 (still bad) 2008-Aug-29 00:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.104 (still bad) 2008-Aug-29 00:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.104 (still bad) 2008-Aug-29 00:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.105 (still bad) 2008-Aug-29 00:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.103 (still bad) 2008-Aug-29 00:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 00:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 00:44:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:44:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.094 1.081 1.065 2008-Aug-29 00:44:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 0.950 1.055 0.924 2008-Aug-29 00:44:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.920 1.058 0.947 2008-Aug-29 00:44:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.097 1.026 0.109 2008-Aug-29 00:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 00:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:45:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 00:45:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.095 1.080 1.064 2008-Aug-29 00:45:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 0.951 1.056 0.923 2008-Aug-29 00:45:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.917 1.058 0.945 2008-Aug-29 00:45:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.098 1.025 0.109 2008-Aug-29 00:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 00:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 00:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 00:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 00:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 00:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 00:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 00:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.094 (still bad) 2008-Aug-29 00:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.094 (still bad) 2008-Aug-29 00:46:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:46:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.096 1.082 1.065 2008-Aug-29 00:46:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 0.948 1.058 0.924 2008-Aug-29 00:46:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.915 1.059 0.948 2008-Aug-29 00:46:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.097 1.023 0.108 2008-Aug-29 00:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.094 (still bad) 2008-Aug-29 00:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.094 (still bad) 2008-Aug-29 00:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.094 (still bad) 2008-Aug-29 00:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.108 (still bad) 2008-Aug-29 00:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-29 00:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.127 (still bad) 2008-Aug-29 00:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-29 00:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.133 (still bad) 2008-Aug-29 00:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.125 (still bad) 2008-Aug-29 00:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-29 00:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.104 (still bad) 2008-Aug-29 00:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 00:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 00:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.094 (still bad) 2008-Aug-29 00:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:47:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:47:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.095 1.084 1.066 2008-Aug-29 00:47:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 0.945 1.063 0.932 2008-Aug-29 00:47:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.913 1.054 0.942 2008-Aug-29 00:47:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.097 1.022 0.108 2008-Aug-29 00:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 00:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 00:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 00:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 00:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 00:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.094 (still bad) 2008-Aug-29 00:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 00:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 00:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 00:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.094 (still bad) 2008-Aug-29 00:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 00:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:48:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:48:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.095 1.078 1.060 2008-Aug-29 00:48:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 0.946 1.054 0.922 2008-Aug-29 00:48:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.925 1.054 0.942 2008-Aug-29 00:48:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.097 1.023 0.108 2008-Aug-29 00:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.107 (still bad) 2008-Aug-29 00:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.110 (still bad) 2008-Aug-29 00:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.109 (still bad) 2008-Aug-29 00:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.108 (still bad) 2008-Aug-29 00:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.103 (still bad) 2008-Aug-29 00:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 00:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 00:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.133 (still bad) 2008-Aug-29 00:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.171 (still bad) 2008-Aug-29 00:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.196 (still bad) 2008-Aug-29 00:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.211 (still bad) 2008-Aug-29 00:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.205 (still bad) 2008-Aug-29 00:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.175 (still bad) 2008-Aug-29 00:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.146 (still bad) 2008-Aug-29 00:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.112 (still bad) 2008-Aug-29 00:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.107 (still bad) 2008-Aug-29 00:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-29 00:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-29 00:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.162 (still bad) 2008-Aug-29 00:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.184 (still bad) 2008-Aug-29 00:49:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:49:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.179 1.195 1.080 1.062 2008-Aug-29 00:49:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 0.948 1.058 0.925 2008-Aug-29 00:49:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.914 1.056 0.943 2008-Aug-29 00:49:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.097 1.024 0.108 2008-Aug-29 00:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.194 (still bad) 2008-Aug-29 00:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.181 (still bad) 2008-Aug-29 00:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-29 00:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.133 (still bad) 2008-Aug-29 00:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.112 (still bad) 2008-Aug-29 00:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.106 (still bad) 2008-Aug-29 00:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.103 (still bad) 2008-Aug-29 00:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 00:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.094 (still bad) 2008-Aug-29 00:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.104 (still bad) 2008-Aug-29 00:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.110 (still bad) 2008-Aug-29 00:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 00:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Aug-29 00:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Aug-29 00:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-29 00:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.108 (still bad) 2008-Aug-29 00:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.103 (still bad) 2008-Aug-29 00:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.094 (still bad) 2008-Aug-29 00:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 00:50:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 00:50:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.092 1.079 1.062 2008-Aug-29 00:50:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 0.949 1.062 0.928 2008-Aug-29 00:50:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.917 1.055 0.944 2008-Aug-29 00:50:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.098 1.025 0.108 2008-Aug-29 00:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 00:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 00:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.094 (still bad) 2008-Aug-29 00:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.094 (still bad) 2008-Aug-29 00:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.094 (still bad) 2008-Aug-29 00:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.094 (still bad) 2008-Aug-29 00:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:51:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:51:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.094 1.078 1.063 2008-Aug-29 00:51:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 0.948 1.057 0.924 2008-Aug-29 00:51:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.917 1.052 0.944 2008-Aug-29 00:51:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.097 1.024 0.108 2008-Aug-29 00:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.094 (still bad) 2008-Aug-29 00:51:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 00:51:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 00:51:15 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2008-Aug-29 00:51:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 00:51:15 LOG5 end_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2008-Aug-29 00:51:15 LOG1 fixed_driftmap: New position: year = 2008.6626573313558 RA = 22:54:50.9 RA/Dec = 22:55:19.3 +03:49:14.8 2008-Aug-29 00:51:15 NOTE fixed_driftmap: Correcting ZA to 14:31:58.9 ... 2008-Aug-29 00:51:15 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5330349782 -CF 2008-Aug-29 00:51:15 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 00:51:15 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 00:51:15 LOG5 begin_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2008-Aug-29 00:51:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 00:51:15 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 00:51:15 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Aug-29 00:51:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 00:51:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 00:51:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 00:51:15 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 00:51:15 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Aug-29 00:51:15 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5330349782 -CF 2008-Aug-29 00:51:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:51:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 00:51:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 00:51:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:51:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 00:51:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 00:51:16 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2008-Aug-29 00:51:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 00:51:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 00:51:16 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 00:51:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 00:51:16 LOG5 begin_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Aug-29 00:51:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 00:51:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 00:51:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 00:51:16 LOG5 end_task: Level: (4) ID = <10052> Status = 0 0 0 0 ok 2008-Aug-29 00:51:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 00:51:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 00:51:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 00:51:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 00:51:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 00:51:16 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Aug-29 00:51:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 00:51:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 00:51:16 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Aug-29 00:51:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 00:51:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 00:51:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 00:51:16 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2008-Aug-29 00:51:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 00:51:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 00:51:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 00:51:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 00:51:16 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Aug-29 00:51:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 00:51:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 00:51:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 00:51:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 00:51:16 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Aug-29 00:51:16 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 00:51:16 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 00:51:16 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 00:51:16 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Aug-29 00:51:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 00:51:16 INFO2 take_data: Starting WAPP scan: 824200004 2008-Aug-29 00:51:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 00:51:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 00:51:16 LOG5 begin_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Aug-29 00:51:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 00:51:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17477.00 2008-Aug-29 00:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.094 (still bad) 2008-Aug-29 00:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 00:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:51:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:51:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 00:51:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 00:51:18 LOG5 end_task: Level: (4) ID = <10056> Status = 0 0 0 0 ok 2008-Aug-29 00:51:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 00:51:18 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2008-Aug-29 00:51:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 00:51:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 00:51:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 00:51:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 00:51:18 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Aug-29 00:51:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 00:51:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 00:51:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 00:51:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 00:51:18 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2008-Aug-29 00:51:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 00:51:18 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 00:51:18 LOG5 finish_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2008-Aug-29 00:51:18 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 00:51:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 00:51:18 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 00:51:18 LOG5 end_task: Level: (2) ID = <10049> Status = 0 0 0 0 ok 2008-Aug-29 00:51:18 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2008-Aug-29 00:51:18 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2008-Aug-29 00:51:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 00:51:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 00:51:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 00:51:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 00:51:19 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 00:51:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 00:51:19 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 00:51:19 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 00:51:19 LOG5 begin_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2008-Aug-29 00:51:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 00:51:19 INFO2 take_data: Starting WAPP scan: 824200005 2008-Aug-29 00:51:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 00:51:19 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 00:51:19 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Aug-29 00:51:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 00:51:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 00:51:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17480.00 2008-Aug-29 00:51:19 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0002.fits 2008-Aug-29 00:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.516 (still bad) 2008-Aug-29 00:51:19 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0002.fits} 2008-Aug-29 00:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 00:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:51:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 00:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.516 (still bad) 2008-Aug-29 00:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.094 (still bad) 2008-Aug-29 00:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 00:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:52:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:52:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.092 1.078 1.061 2008-Aug-29 00:52:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 0.949 1.052 0.923 2008-Aug-29 00:52:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.916 1.058 0.945 2008-Aug-29 00:52:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.097 1.029 0.108 2008-Aug-29 00:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:52:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 00:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 00:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:53:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:53:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.095 1.078 1.062 2008-Aug-29 00:53:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.949 1.054 0.923 2008-Aug-29 00:53:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.921 1.055 0.947 2008-Aug-29 00:53:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.097 1.029 0.108 2008-Aug-29 00:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 00:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 00:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:54:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:54:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.093 1.077 1.060 2008-Aug-29 00:54:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 0.949 1.054 0.923 2008-Aug-29 00:54:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.919 1.056 0.945 2008-Aug-29 00:54:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.097 1.024 0.108 2008-Aug-29 00:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 00:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.106 (still bad) 2008-Aug-29 00:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 00:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.105 (still bad) 2008-Aug-29 00:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.103 (still bad) 2008-Aug-29 00:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 00:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.103 (still bad) 2008-Aug-29 00:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 00:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.103 (still bad) 2008-Aug-29 00:55:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:55:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.093 1.078 1.061 2008-Aug-29 00:55:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 0.950 1.059 0.927 2008-Aug-29 00:55:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.922 1.054 0.947 2008-Aug-29 00:55:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.097 1.024 0.108 2008-Aug-29 00:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 00:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.105 (still bad) 2008-Aug-29 00:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.106 (still bad) 2008-Aug-29 00:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.111 (still bad) 2008-Aug-29 00:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-29 00:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 00:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.104 (still bad) 2008-Aug-29 00:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 00:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:56:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:56:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.094 1.076 1.060 2008-Aug-29 00:56:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.964 1.054 0.925 2008-Aug-29 00:56:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.921 1.058 0.949 2008-Aug-29 00:56:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.097 1.026 0.108 2008-Aug-29 00:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 00:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.103 (still bad) 2008-Aug-29 00:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 00:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-29 00:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.127 (still bad) 2008-Aug-29 00:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.129 (still bad) 2008-Aug-29 00:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.125 (still bad) 2008-Aug-29 00:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-29 00:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-29 00:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Aug-29 00:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-29 00:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-29 00:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.128 (still bad) 2008-Aug-29 00:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.127 (still bad) 2008-Aug-29 00:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-29 00:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-29 00:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.105 (still bad) 2008-Aug-29 00:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.104 (still bad) 2008-Aug-29 00:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.106 (still bad) 2008-Aug-29 00:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-29 00:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-29 00:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-29 00:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-29 00:57:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:57:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.095 1.075 1.061 2008-Aug-29 00:57:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.931 0.949 1.067 0.935 2008-Aug-29 00:57:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.934 1.056 0.947 2008-Aug-29 00:57:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.097 1.027 0.109 2008-Aug-29 00:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.108 (still bad) 2008-Aug-29 00:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 00:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 00:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 00:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 00:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 00:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:58:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 00:58:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.092 1.078 1.058 2008-Aug-29 00:58:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.952 1.054 0.924 2008-Aug-29 00:58:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.921 1.055 0.946 2008-Aug-29 00:58:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.097 1.025 0.109 2008-Aug-29 00:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 00:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 00:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 00:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 00:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 00:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 00:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 00:59:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 00:59:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.113 1.078 1.061 2008-Aug-29 00:59:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.950 1.056 0.923 2008-Aug-29 00:59:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.919 1.057 0.948 2008-Aug-29 00:59:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.098 1.028 0.109 2008-Aug-29 00:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-29 00:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-29 00:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-29 00:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-29 00:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 00:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 00:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 00:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 00:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 00:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 00:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 00:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 00:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 00:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 00:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 00:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 00:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 00:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:00:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:00:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.097 1.080 1.060 2008-Aug-29 01:00:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.951 1.056 0.922 2008-Aug-29 01:00:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.921 1.054 0.946 2008-Aug-29 01:00:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.098 1.029 0.109 2008-Aug-29 01:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:01:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 01:01:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 01:01:20 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2008-Aug-29 01:01:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 01:01:20 LOG5 end_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2008-Aug-29 01:01:20 LOG1 fixed_driftmap: New position: year = 2008.662676502649 RA = 23:04:57.6 RA/Dec = 23:05:26.0 +03:49:17.1 2008-Aug-29 01:01:20 NOTE fixed_driftmap: Correcting ZA to 14:31:56.6 ... 2008-Aug-29 01:01:20 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5323990499 -CF 2008-Aug-29 01:01:20 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 01:01:20 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 01:01:20 LOG5 begin_task: Level: (2) ID = <10060> Status = 0 0 0 0 ok 2008-Aug-29 01:01:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 01:01:20 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 01:01:20 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Aug-29 01:01:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 01:01:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 01:01:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 01:01:20 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 01:01:20 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Aug-29 01:01:20 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5323990499 -CF 2008-Aug-29 01:01:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:01:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 01:01:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 01:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:01:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:01:20 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 01:01:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 01:01:20 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2008-Aug-29 01:01:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 01:01:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 01:01:20 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 01:01:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 01:01:20 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Aug-29 01:01:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:01:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 01:01:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 01:01:21 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2008-Aug-29 01:01:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 01:01:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 01:01:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 01:01:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 01:01:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 01:01:21 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Aug-29 01:01:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 01:01:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 01:01:21 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Aug-29 01:01:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 01:01:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 01:01:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 01:01:21 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2008-Aug-29 01:01:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 01:01:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 01:01:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 01:01:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 01:01:21 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Aug-29 01:01:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 01:01:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 01:01:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 01:01:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 01:01:21 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Aug-29 01:01:21 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 01:01:21 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 01:01:21 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 01:01:21 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Aug-29 01:01:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 01:01:21 INFO2 take_data: Starting WAPP scan: 824200006 2008-Aug-29 01:01:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 01:01:21 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 01:01:21 LOG5 begin_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Aug-29 01:01:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 01:01:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18082.00 2008-Aug-29 01:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 01:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:01:23 LOG3 WAPP=1+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:01:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:01:23 LOG3 WAPP=2-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:01:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 01:01:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 01:01:23 LOG5 end_task: Level: (4) ID = <10067> Status = 0 0 0 0 ok 2008-Aug-29 01:01:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 01:01:23 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2008-Aug-29 01:01:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 01:01:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 01:01:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 01:01:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 01:01:23 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Aug-29 01:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.527 (still bad) 2008-Aug-29 01:01:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 01:01:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 01:01:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 01:01:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 01:01:24 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2008-Aug-29 01:01:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 01:01:24 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 01:01:24 LOG5 finish_task: Level: (2) ID = <10060> Status = 0 0 0 0 ok 2008-Aug-29 01:01:24 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 01:01:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 01:01:24 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 01:01:24 LOG5 end_task: Level: (2) ID = <10060> Status = 0 0 0 0 ok 2008-Aug-29 01:01:24 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2008-Aug-29 01:01:24 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2008-Aug-29 01:01:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 01:01:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 01:01:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 01:01:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 01:01:24 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 01:01:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 01:01:24 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 01:01:24 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 01:01:24 LOG5 begin_task: Level: (2) ID = <10069> Status = 0 0 0 0 ok 2008-Aug-29 01:01:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 01:01:24 INFO2 take_data: Starting WAPP scan: 824200007 2008-Aug-29 01:01:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 01:01:24 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 01:01:24 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Aug-29 01:01:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 01:01:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 01:01:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18085.00 2008-Aug-29 01:01:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0003.fits 2008-Aug-29 01:01:24 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0003.fits} 2008-Aug-29 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:01:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:01:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:01:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.486 1.481 1.441 1.417 2008-Aug-29 01:01:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.272 1.294 1.452 1.256 2008-Aug-29 01:01:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.924 1.058 0.949 2008-Aug-29 01:01:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.098 1.028 0.109 2008-Aug-29 01:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 01:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 01:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 01:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:02:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:02:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.096 1.078 1.062 2008-Aug-29 01:02:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 0.952 1.063 0.928 2008-Aug-29 01:02:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.922 1.065 0.958 2008-Aug-29 01:02:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.038 0.109 2008-Aug-29 01:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 01:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 01:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 01:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.107 (still bad) 2008-Aug-29 01:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.107 (still bad) 2008-Aug-29 01:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 01:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 01:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 01:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:03:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:03:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.098 1.080 1.062 2008-Aug-29 01:03:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.954 1.055 0.925 2008-Aug-29 01:03:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.921 1.056 0.947 2008-Aug-29 01:03:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.098 1.029 0.109 2008-Aug-29 01:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.101 (still bad) 2008-Aug-29 01:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 01:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.102 (still bad) 2008-Aug-29 01:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 01:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-29 01:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-29 01:04:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:04:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.097 1.080 1.063 2008-Aug-29 01:04:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.955 1.058 0.925 2008-Aug-29 01:04:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.125 0.942 1.058 0.951 2008-Aug-29 01:04:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.098 1.030 0.109 2008-Aug-29 01:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-29 01:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-29 01:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-29 01:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-29 01:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-29 01:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-29 01:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-29 01:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-29 01:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-29 01:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-29 01:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-29 01:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 01:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 01:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 01:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 01:05:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 01:05:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.099 1.084 1.065 2008-Aug-29 01:05:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 0.951 1.062 0.928 2008-Aug-29 01:05:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.918 1.056 0.946 2008-Aug-29 01:05:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.097 1.026 0.109 2008-Aug-29 01:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 01:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.100 (still bad) 2008-Aug-29 01:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 01:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 01:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 01:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 01:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 01:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.099 (still bad) 2008-Aug-29 01:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 01:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 01:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 01:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 01:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:06:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:06:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.097 1.082 1.063 2008-Aug-29 01:06:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.949 1.057 0.922 2008-Aug-29 01:06:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.915 1.056 0.943 2008-Aug-29 01:06:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.098 1.026 0.109 2008-Aug-29 01:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:06:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 01:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 01:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 01:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 01:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.094 (still bad) 2008-Aug-29 01:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 01:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 01:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 01:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.094 (still bad) 2008-Aug-29 01:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 01:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 01:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 01:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 01:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 01:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 01:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:07:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 01:07:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.098 1.082 1.064 2008-Aug-29 01:07:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 0.945 1.057 0.922 2008-Aug-29 01:07:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.911 1.056 0.943 2008-Aug-29 01:07:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.097 1.024 0.108 2008-Aug-29 01:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 01:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 01:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.106 (still bad) 2008-Aug-29 01:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.105 (still bad) 2008-Aug-29 01:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 01:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.095 (still bad) 2008-Aug-29 01:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.094 (still bad) 2008-Aug-29 01:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.094 (still bad) 2008-Aug-29 01:08:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:08:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.094 1.081 1.061 2008-Aug-29 01:08:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 0.948 1.057 0.925 2008-Aug-29 01:08:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.912 1.063 0.946 2008-Aug-29 01:08:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.098 1.026 0.108 2008-Aug-29 01:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 01:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.094 (still bad) 2008-Aug-29 01:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.093 (still bad) 2008-Aug-29 01:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 01:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.098 (still bad) 2008-Aug-29 01:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.096 (still bad) 2008-Aug-29 01:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 01:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 01:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:09:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:09:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.098 1.079 1.063 2008-Aug-29 01:09:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.953 1.057 0.924 2008-Aug-29 01:09:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.916 1.056 0.945 2008-Aug-29 01:09:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.098 1.030 0.109 2008-Aug-29 01:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.097 (still bad) 2008-Aug-29 01:09:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:10:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:10:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.098 1.080 1.063 2008-Aug-29 01:10:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.951 1.058 0.926 2008-Aug-29 01:10:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.917 1.056 0.946 2008-Aug-29 01:10:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.098 1.025 0.109 2008-Aug-29 01:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:11:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 01:11:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 01:11:25 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2008-Aug-29 01:11:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 01:11:25 LOG5 end_task: Level: (2) ID = <10069> Status = 0 0 0 0 ok 2008-Aug-29 01:11:25 LOG1 fixed_driftmap: New position: year = 2008.6626956739422 RA = 23:15:04.2 RA/Dec = 23:15:32.7 +03:49:19.0 2008-Aug-29 01:11:25 NOTE fixed_driftmap: Correcting ZA to 14:31:54.7 ... 2008-Aug-29 01:11:25 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5318558630 -CF 2008-Aug-29 01:11:25 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 01:11:25 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 01:11:25 LOG5 begin_task: Level: (2) ID = <10071> Status = 0 0 0 0 ok 2008-Aug-29 01:11:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 01:11:25 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 01:11:25 LOG5 begin_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Aug-29 01:11:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 01:11:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 01:11:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 01:11:25 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 01:11:25 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Aug-29 01:11:25 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5318558630 -CF 2008-Aug-29 01:11:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:11:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 01:11:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 01:11:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:11:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 01:11:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 01:11:26 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2008-Aug-29 01:11:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 01:11:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 01:11:26 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 01:11:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 01:11:26 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Aug-29 01:11:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:11:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 01:11:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 01:11:26 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2008-Aug-29 01:11:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 01:11:26 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 01:11:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 01:11:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 01:11:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 01:11:26 LOG5 begin_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2008-Aug-29 01:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:11:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 01:11:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 01:11:26 LOG5 end_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2008-Aug-29 01:11:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 01:11:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 01:11:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 01:11:26 LOG5 end_task: Level: (3) ID = <10072> Status = 0 0 0 0 ok 2008-Aug-29 01:11:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 01:11:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 01:11:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 01:11:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 01:11:26 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Aug-29 01:11:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 01:11:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 01:11:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 01:11:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 01:11:26 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Aug-29 01:11:26 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 01:11:26 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 01:11:26 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 01:11:26 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Aug-29 01:11:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 01:11:26 INFO2 take_data: Starting WAPP scan: 824200008 2008-Aug-29 01:11:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 01:11:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 01:11:26 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Aug-29 01:11:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 01:11:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18687.00 2008-Aug-29 01:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 01:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:11:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:11:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 01:11:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 01:11:28 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2008-Aug-29 01:11:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 01:11:28 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2008-Aug-29 01:11:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 01:11:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 01:11:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 01:11:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 01:11:28 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Aug-29 01:11:28 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 01:11:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 01:11:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 01:11:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 01:11:28 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2008-Aug-29 01:11:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 01:11:28 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 01:11:28 LOG5 finish_task: Level: (2) ID = <10071> Status = 0 0 0 0 ok 2008-Aug-29 01:11:28 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 01:11:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 01:11:28 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 01:11:28 LOG5 end_task: Level: (2) ID = <10071> Status = 0 0 0 0 ok 2008-Aug-29 01:11:28 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2008-Aug-29 01:11:28 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2008-Aug-29 01:11:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 01:11:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 01:11:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 01:11:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 01:11:29 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 01:11:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 01:11:29 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 01:11:29 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 01:11:29 LOG5 begin_task: Level: (2) ID = <10080> Status = 0 0 0 0 ok 2008-Aug-29 01:11:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 01:11:29 INFO2 take_data: Starting WAPP scan: 824200009 2008-Aug-29 01:11:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 01:11:29 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 01:11:29 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Aug-29 01:11:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 01:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.520 (still bad) 2008-Aug-29 01:11:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 01:11:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18690.00 2008-Aug-29 01:11:29 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0004.fits 2008-Aug-29 01:11:29 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0004.fits} 2008-Aug-29 01:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 01:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:11:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.520 (still bad) 2008-Aug-29 01:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:11:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:11:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.096 1.081 1.063 2008-Aug-29 01:11:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.953 1.057 0.925 2008-Aug-29 01:11:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.917 1.056 0.946 2008-Aug-29 01:11:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.098 1.026 0.109 2008-Aug-29 01:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.106 (still bad) 2008-Aug-29 01:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 01:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 01:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-29 01:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:12:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:12:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.100 1.086 1.064 2008-Aug-29 01:12:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.954 1.061 0.928 2008-Aug-29 01:12:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.927 1.058 0.949 2008-Aug-29 01:12:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.098 1.028 0.109 2008-Aug-29 01:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 01:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-29 01:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-29 01:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-29 01:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-29 01:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-29 01:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 01:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:13:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:13:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.099 1.085 1.066 2008-Aug-29 01:13:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.953 1.055 0.927 2008-Aug-29 01:13:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.922 1.059 0.947 2008-Aug-29 01:13:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.098 1.031 0.109 2008-Aug-29 01:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:14:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:14:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.098 1.082 1.062 2008-Aug-29 01:14:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.953 1.058 0.925 2008-Aug-29 01:14:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.921 1.057 0.948 2008-Aug-29 01:14:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.098 1.031 0.109 2008-Aug-29 01:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:15:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:15:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.100 1.084 1.065 2008-Aug-29 01:15:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.954 1.059 0.926 2008-Aug-29 01:15:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.921 1.060 0.948 2008-Aug-29 01:15:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.098 1.030 0.109 2008-Aug-29 01:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:16:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:16:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.096 1.081 1.065 2008-Aug-29 01:16:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.953 1.058 0.927 2008-Aug-29 01:16:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.922 1.056 0.949 2008-Aug-29 01:16:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.098 1.028 0.109 2008-Aug-29 01:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:17:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:17:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.095 1.081 1.064 2008-Aug-29 01:17:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.955 1.056 0.926 2008-Aug-29 01:17:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.922 1.058 0.950 2008-Aug-29 01:17:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.098 1.030 0.109 2008-Aug-29 01:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:18:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:18:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.099 1.081 1.062 2008-Aug-29 01:18:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.954 1.057 0.926 2008-Aug-29 01:18:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.922 1.057 0.949 2008-Aug-29 01:18:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.098 1.030 0.109 2008-Aug-29 01:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:19:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:19:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.099 1.081 1.066 2008-Aug-29 01:19:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.954 1.056 0.927 2008-Aug-29 01:19:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.922 1.059 0.950 2008-Aug-29 01:19:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.039 0.109 2008-Aug-29 01:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 01:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:20:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:20:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.101 1.081 1.066 2008-Aug-29 01:20:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.959 1.058 0.926 2008-Aug-29 01:20:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.924 1.057 0.950 2008-Aug-29 01:20:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.098 1.033 0.109 2008-Aug-29 01:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:21:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 01:21:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 01:21:30 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2008-Aug-29 01:21:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 01:21:30 LOG5 end_task: Level: (2) ID = <10080> Status = 0 0 0 0 ok 2008-Aug-29 01:21:30 LOG1 fixed_driftmap: New position: year = 2008.6627148452353 RA = 23:25:10.8 RA/Dec = 23:25:39.3 +03:49:20.6 2008-Aug-29 01:21:30 NOTE fixed_driftmap: Correcting ZA to 14:31:53.1 ... 2008-Aug-29 01:21:30 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5314064735 -CF 2008-Aug-29 01:21:30 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 01:21:30 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 01:21:30 LOG5 begin_task: Level: (2) ID = <10082> Status = 0 0 0 0 ok 2008-Aug-29 01:21:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 01:21:30 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 01:21:30 LOG5 begin_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Aug-29 01:21:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 01:21:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 01:21:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 01:21:30 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 01:21:30 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Aug-29 01:21:30 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5314064735 -CF 2008-Aug-29 01:21:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:21:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 01:21:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 01:21:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:21:30 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 01:21:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 01:21:30 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2008-Aug-29 01:21:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 01:21:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 01:21:30 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 01:21:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 01:21:30 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2008-Aug-29 01:21:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:21:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 01:21:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 01:21:31 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2008-Aug-29 01:21:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 01:21:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 01:21:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 01:21:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 01:21:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 01:21:31 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Aug-29 01:21:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 01:21:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 01:21:31 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Aug-29 01:21:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 01:21:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 01:21:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 01:21:31 LOG5 end_task: Level: (3) ID = <10083> Status = 0 0 0 0 ok 2008-Aug-29 01:21:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 01:21:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 01:21:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 01:21:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 01:21:31 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Aug-29 01:21:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 01:21:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 01:21:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 01:21:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 01:21:31 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Aug-29 01:21:31 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 01:21:31 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 01:21:31 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 01:21:31 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Aug-29 01:21:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 01:21:31 INFO2 take_data: Starting WAPP scan: 824200010 2008-Aug-29 01:21:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 01:21:31 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 01:21:31 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Aug-29 01:21:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 01:21:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19292.00 2008-Aug-29 01:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 01:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:21:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:21:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 01:21:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 01:21:33 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2008-Aug-29 01:21:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 01:21:33 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2008-Aug-29 01:21:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 01:21:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 01:21:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 01:21:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 01:21:33 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Aug-29 01:21:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 01:21:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 01:21:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 01:21:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 01:21:34 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2008-Aug-29 01:21:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 01:21:34 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 01:21:34 LOG5 finish_task: Level: (2) ID = <10082> Status = 0 0 0 0 ok 2008-Aug-29 01:21:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 01:21:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 01:21:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 01:21:34 LOG5 end_task: Level: (2) ID = <10082> Status = 0 0 0 0 ok 2008-Aug-29 01:21:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2008-Aug-29 01:21:34 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2008-Aug-29 01:21:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 01:21:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 01:21:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 01:21:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 01:21:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 01:21:34 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 01:21:34 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 01:21:34 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 01:21:34 LOG5 begin_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Aug-29 01:21:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 01:21:34 INFO2 take_data: Starting WAPP scan: 824200011 2008-Aug-29 01:21:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 01:21:34 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 01:21:34 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Aug-29 01:21:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 01:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.533 (still bad) 2008-Aug-29 01:21:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 01:21:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19295.00 2008-Aug-29 01:21:34 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0005.fits 2008-Aug-29 01:21:34 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0005.fits} 2008-Aug-29 01:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 01:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:21:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.533 (still bad) 2008-Aug-29 01:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:21:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:21:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.097 1.081 1.066 2008-Aug-29 01:21:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.955 1.056 0.927 2008-Aug-29 01:21:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.923 1.059 0.951 2008-Aug-29 01:21:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.098 1.031 0.109 2008-Aug-29 01:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:22:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:22:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.100 1.081 1.068 2008-Aug-29 01:22:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.955 1.058 0.928 2008-Aug-29 01:22:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.923 1.059 0.950 2008-Aug-29 01:22:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.098 1.032 0.109 2008-Aug-29 01:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:23:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:23:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.100 1.082 1.064 2008-Aug-29 01:23:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.960 1.058 0.928 2008-Aug-29 01:23:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.923 1.061 0.953 2008-Aug-29 01:23:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.098 1.032 0.109 2008-Aug-29 01:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:25:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:25:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.099 1.083 1.067 2008-Aug-29 01:25:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.955 1.057 0.928 2008-Aug-29 01:25:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.925 1.059 0.951 2008-Aug-29 01:25:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.098 1.032 0.109 2008-Aug-29 01:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:26:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:26:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.098 1.082 1.068 2008-Aug-29 01:26:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.957 1.059 0.928 2008-Aug-29 01:26:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.925 1.060 0.952 2008-Aug-29 01:26:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.098 1.033 0.109 2008-Aug-29 01:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:27:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:27:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.099 1.086 1.067 2008-Aug-29 01:27:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.953 1.060 0.927 2008-Aug-29 01:27:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.921 1.061 0.950 2008-Aug-29 01:27:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.098 1.033 0.109 2008-Aug-29 01:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:28:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:28:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.097 1.082 1.065 2008-Aug-29 01:28:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.951 1.059 0.926 2008-Aug-29 01:28:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.916 1.058 0.946 2008-Aug-29 01:28:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.098 1.033 0.109 2008-Aug-29 01:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 01:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:29:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:29:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.111 1.084 1.066 2008-Aug-29 01:29:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.954 1.056 0.923 2008-Aug-29 01:29:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.910 1.057 0.944 2008-Aug-29 01:29:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.098 1.027 0.109 2008-Aug-29 01:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-29 01:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-29 01:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-29 01:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-29 01:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-29 01:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 01:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 01:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:30:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:30:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.098 1.082 1.065 2008-Aug-29 01:30:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.948 1.056 0.923 2008-Aug-29 01:30:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.911 1.057 0.944 2008-Aug-29 01:30:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.098 1.026 0.109 2008-Aug-29 01:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:31:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:31:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.097 1.082 1.063 2008-Aug-29 01:31:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.950 1.063 0.930 2008-Aug-29 01:31:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.914 1.059 0.947 2008-Aug-29 01:31:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.098 1.028 0.109 2008-Aug-29 01:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:31:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 01:31:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 01:31:35 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2008-Aug-29 01:31:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 01:31:35 LOG5 end_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2008-Aug-29 01:31:35 LOG1 fixed_driftmap: New position: year = 2008.6627340165285 RA = 23:35:17.5 RA/Dec = 23:35:46.0 +03:49:21.9 2008-Aug-29 01:31:35 NOTE fixed_driftmap: Correcting ZA to 14:31:51.8 ... 2008-Aug-29 01:31:35 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5310517532 -CF 2008-Aug-29 01:31:35 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 01:31:35 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 01:31:35 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2008-Aug-29 01:31:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 01:31:35 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 01:31:35 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-Aug-29 01:31:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 01:31:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 01:31:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 01:31:35 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 01:31:35 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2008-Aug-29 01:31:35 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5310517532 -CF 2008-Aug-29 01:31:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:31:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 01:31:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 01:31:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:31:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 01:31:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 01:31:36 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2008-Aug-29 01:31:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 01:31:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 01:31:36 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 01:31:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 01:31:36 LOG5 begin_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Aug-29 01:31:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:31:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 01:31:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 01:31:36 LOG5 end_task: Level: (4) ID = <10096> Status = 0 0 0 0 ok 2008-Aug-29 01:31:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 01:31:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 01:31:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 01:31:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 01:31:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 01:31:36 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Aug-29 01:31:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 01:31:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 01:31:36 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Aug-29 01:31:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 01:31:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 01:31:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 01:31:36 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2008-Aug-29 01:31:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 01:31:36 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 01:31:36 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 01:31:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 01:31:36 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Aug-29 01:31:36 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 01:31:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 01:31:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 01:31:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 01:31:36 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Aug-29 01:31:36 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 01:31:36 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 01:31:36 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 01:31:36 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Aug-29 01:31:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 01:31:36 INFO2 take_data: Starting WAPP scan: 824200012 2008-Aug-29 01:31:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 01:31:36 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 01:31:36 LOG5 begin_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2008-Aug-29 01:31:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 01:31:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19897.00 2008-Aug-29 01:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 01:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:31:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:31:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 01:31:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 01:31:38 LOG5 end_task: Level: (4) ID = <10100> Status = 0 0 0 0 ok 2008-Aug-29 01:31:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 01:31:38 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2008-Aug-29 01:31:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 01:31:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 01:31:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 01:31:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 01:31:38 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2008-Aug-29 01:31:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 01:31:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 01:31:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 01:31:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 01:31:38 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2008-Aug-29 01:31:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 01:31:38 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 01:31:38 LOG5 finish_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2008-Aug-29 01:31:38 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 01:31:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 01:31:38 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 01:31:38 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2008-Aug-29 01:31:38 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2008-Aug-29 01:31:38 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2008-Aug-29 01:31:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 01:31:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 01:31:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 01:31:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 01:31:39 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 01:31:39 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 01:31:39 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 01:31:39 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 01:31:39 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Aug-29 01:31:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 01:31:39 INFO2 take_data: Starting WAPP scan: 824200013 2008-Aug-29 01:31:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 01:31:39 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 01:31:39 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2008-Aug-29 01:31:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 01:31:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 01:31:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19900.00 2008-Aug-29 01:31:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0006.fits 2008-Aug-29 01:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.519 (still bad) 2008-Aug-29 01:31:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0006.fits} 2008-Aug-29 01:31:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 01:31:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:31:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:31:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:31:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:31:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:31:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:31:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:31:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.519 (still bad) 2008-Aug-29 01:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-29 01:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-29 01:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-29 01:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-29 01:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.159 (still bad) 2008-Aug-29 01:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-29 01:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-29 01:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-29 01:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-29 01:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:32:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:32:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.102 1.082 1.065 2008-Aug-29 01:32:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.964 0.975 1.058 0.926 2008-Aug-29 01:32:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.917 1.058 0.947 2008-Aug-29 01:32:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.098 1.032 0.109 2008-Aug-29 01:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:33:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:33:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.097 1.081 1.064 2008-Aug-29 01:33:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.953 1.065 0.933 2008-Aug-29 01:33:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.918 1.061 0.948 2008-Aug-29 01:33:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.098 1.029 0.109 2008-Aug-29 01:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2008-Aug-29 01:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:34:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:34:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.097 1.085 1.066 2008-Aug-29 01:34:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.951 1.057 0.925 2008-Aug-29 01:34:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.918 1.060 0.946 2008-Aug-29 01:34:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.098 1.028 0.109 2008-Aug-29 01:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 01:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.094 (still bad) 2008-Aug-29 01:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:35:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:35:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.099 1.082 1.062 2008-Aug-29 01:35:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.948 1.056 0.925 2008-Aug-29 01:35:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.911 1.059 0.941 2008-Aug-29 01:35:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.098 1.027 0.109 2008-Aug-29 01:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 01:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 01:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 01:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:36:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:36:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.097 1.081 1.061 2008-Aug-29 01:36:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.945 1.055 0.922 2008-Aug-29 01:36:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.909 1.060 0.941 2008-Aug-29 01:36:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.098 1.026 0.109 2008-Aug-29 01:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 01:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 01:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:37:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:37:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.095 1.081 1.062 2008-Aug-29 01:37:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.947 1.056 0.923 2008-Aug-29 01:37:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 0.910 1.060 0.942 2008-Aug-29 01:37:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.098 1.025 0.109 2008-Aug-29 01:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.095 (still bad) 2008-Aug-29 01:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.093 (still bad) 2008-Aug-29 01:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:38:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:38:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.099 1.083 1.064 2008-Aug-29 01:38:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.949 1.055 0.923 2008-Aug-29 01:38:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.911 1.058 0.942 2008-Aug-29 01:38:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.098 1.026 0.109 2008-Aug-29 01:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.096 (still bad) 2008-Aug-29 01:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:39:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:39:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.097 1.082 1.063 2008-Aug-29 01:39:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.949 1.056 0.924 2008-Aug-29 01:39:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.912 1.057 0.944 2008-Aug-29 01:39:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.098 1.028 0.109 2008-Aug-29 01:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:40:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:40:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.096 1.082 1.063 2008-Aug-29 01:40:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.949 1.055 0.923 2008-Aug-29 01:40:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.914 1.061 0.944 2008-Aug-29 01:40:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.098 1.028 0.109 2008-Aug-29 01:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2008-Aug-29 01:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.097 (still bad) 2008-Aug-29 01:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:41:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:41:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.101 1.085 1.064 2008-Aug-29 01:41:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.951 1.060 0.927 2008-Aug-29 01:41:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.918 1.063 0.949 2008-Aug-29 01:41:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.098 1.029 0.109 2008-Aug-29 01:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:41:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 01:41:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 01:41:40 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2008-Aug-29 01:41:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 01:41:40 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2008-Aug-29 01:41:40 LOG1 fixed_driftmap: New position: year = 2008.6627531878216 RA = 23:45:24.1 RA/Dec = 23:45:52.6 +03:49:22.8 2008-Aug-29 01:41:40 NOTE fixed_driftmap: Correcting ZA to 14:31:50.9 ... 2008-Aug-29 01:41:40 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5307923930 -CF 2008-Aug-29 01:41:40 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 01:41:40 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 01:41:40 LOG5 begin_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2008-Aug-29 01:41:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 01:41:40 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 01:41:40 LOG5 begin_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Aug-29 01:41:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 01:41:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 01:41:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 01:41:40 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 01:41:40 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Aug-29 01:41:40 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5307923930 -CF 2008-Aug-29 01:41:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:41:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 01:41:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 01:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:41:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:41:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 01:41:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 01:41:40 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2008-Aug-29 01:41:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 01:41:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 01:41:40 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 01:41:40 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 01:41:40 LOG5 begin_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Aug-29 01:41:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:41:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 01:41:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 01:41:41 LOG5 end_task: Level: (4) ID = <10107> Status = 0 0 0 0 ok 2008-Aug-29 01:41:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 01:41:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 01:41:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 01:41:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 01:41:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 01:41:41 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Aug-29 01:41:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 01:41:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 01:41:41 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Aug-29 01:41:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 01:41:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 01:41:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 01:41:41 LOG5 end_task: Level: (3) ID = <10105> Status = 0 0 0 0 ok 2008-Aug-29 01:41:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 01:41:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 01:41:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 01:41:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 01:41:41 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Aug-29 01:41:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 01:41:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 01:41:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 01:41:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 01:41:41 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Aug-29 01:41:41 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 01:41:41 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 01:41:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 01:41:41 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Aug-29 01:41:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 01:41:41 INFO2 take_data: Starting WAPP scan: 824200014 2008-Aug-29 01:41:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 01:41:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 01:41:41 LOG5 begin_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2008-Aug-29 01:41:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 01:41:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20502.00 2008-Aug-29 01:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 01:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:41:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:41:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 01:41:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 01:41:43 LOG5 end_task: Level: (4) ID = <10111> Status = 0 0 0 0 ok 2008-Aug-29 01:41:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 01:41:43 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2008-Aug-29 01:41:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 01:41:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 01:41:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 01:41:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 01:41:43 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2008-Aug-29 01:41:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 01:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.526 (still bad) 2008-Aug-29 01:41:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 01:41:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 01:41:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 01:41:44 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2008-Aug-29 01:41:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 01:41:44 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 01:41:44 LOG5 finish_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2008-Aug-29 01:41:44 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 01:41:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 01:41:44 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 01:41:44 LOG5 end_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2008-Aug-29 01:41:44 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2008-Aug-29 01:41:44 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2008-Aug-29 01:41:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 01:41:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 01:41:44 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 01:41:44 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 01:41:44 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 01:41:44 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 01:41:44 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 01:41:44 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 01:41:44 LOG5 begin_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2008-Aug-29 01:41:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 01:41:44 INFO2 take_data: Starting WAPP scan: 824200015 2008-Aug-29 01:41:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 01:41:44 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 01:41:44 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Aug-29 01:41:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 01:41:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 01:41:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20505.00 2008-Aug-29 01:41:44 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0007.fits 2008-Aug-29 01:41:44 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0007.fits} 2008-Aug-29 01:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 01:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:41:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2008-Aug-29 01:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:42:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:42:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.097 1.084 1.061 2008-Aug-29 01:42:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.952 1.056 0.924 2008-Aug-29 01:42:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.917 1.062 0.946 2008-Aug-29 01:42:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.098 1.033 0.109 2008-Aug-29 01:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:43:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:43:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.097 1.082 1.059 2008-Aug-29 01:43:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.953 1.057 0.924 2008-Aug-29 01:43:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.916 1.062 0.946 2008-Aug-29 01:43:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.098 1.030 0.109 2008-Aug-29 01:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:44:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:44:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.097 1.085 1.062 2008-Aug-29 01:44:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.950 1.057 0.923 2008-Aug-29 01:44:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.916 1.062 0.948 2008-Aug-29 01:44:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.098 1.031 0.109 2008-Aug-29 01:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 01:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2008-Aug-29 01:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:45:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:45:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.096 1.084 1.063 2008-Aug-29 01:45:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.952 1.027 0.904 2008-Aug-29 01:45:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.915 1.062 0.944 2008-Aug-29 01:45:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.098 1.032 0.109 2008-Aug-29 01:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 01:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 01:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 01:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 01:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 01:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-29 01:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 01:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:46:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:46:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.097 1.085 1.064 2008-Aug-29 01:46:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.953 1.061 0.924 2008-Aug-29 01:46:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.918 1.063 0.946 2008-Aug-29 01:46:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.098 1.034 0.109 2008-Aug-29 01:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 01:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:47:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:47:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.099 1.084 1.062 2008-Aug-29 01:47:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.953 1.060 0.925 2008-Aug-29 01:47:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.918 1.061 0.947 2008-Aug-29 01:47:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.039 0.109 2008-Aug-29 01:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 01:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:48:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:48:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.098 1.086 1.065 2008-Aug-29 01:48:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.954 1.058 0.925 2008-Aug-29 01:48:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.919 1.062 0.949 2008-Aug-29 01:48:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.098 1.041 0.109 2008-Aug-29 01:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 01:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 01:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 01:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 01:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:49:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:49:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.099 1.085 1.063 2008-Aug-29 01:49:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.953 1.067 0.931 2008-Aug-29 01:49:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.919 1.063 0.948 2008-Aug-29 01:49:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.098 1.033 0.109 2008-Aug-29 01:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 01:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:49:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:49:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:49:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:49:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:49:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:49:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:50:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:50:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.099 1.085 1.062 2008-Aug-29 01:50:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.952 1.057 0.926 2008-Aug-29 01:50:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.918 1.062 0.949 2008-Aug-29 01:50:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.098 1.031 0.109 2008-Aug-29 01:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:51:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:51:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.098 1.086 1.064 2008-Aug-29 01:51:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.953 1.060 0.925 2008-Aug-29 01:51:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.919 1.063 0.950 2008-Aug-29 01:51:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.035 0.110 2008-Aug-29 01:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:51:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 01:51:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 01:51:45 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2008-Aug-29 01:51:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 01:51:45 LOG5 end_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2008-Aug-29 01:51:45 LOG1 fixed_driftmap: New position: year = 2008.6627723591148 RA = 23:55:30.8 RA/Dec = 23:55:59.3 +03:49:23.4 2008-Aug-29 01:51:45 NOTE fixed_driftmap: Correcting ZA to 14:31:50.3 ... 2008-Aug-29 01:51:45 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5306288991 -CF 2008-Aug-29 01:51:45 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 01:51:45 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 01:51:45 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2008-Aug-29 01:51:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 01:51:45 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 01:51:45 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2008-Aug-29 01:51:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 01:51:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 01:51:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 01:51:45 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 01:51:45 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2008-Aug-29 01:51:45 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5306288991 -CF 2008-Aug-29 01:51:45 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:51:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 01:51:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 01:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 01:51:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:51:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 01:51:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 01:51:46 LOG5 end_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2008-Aug-29 01:51:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 01:51:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 01:51:46 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 01:51:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 01:51:46 LOG5 begin_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2008-Aug-29 01:51:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 01:51:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 01:51:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 01:51:46 LOG5 end_task: Level: (4) ID = <10118> Status = 0 0 0 0 ok 2008-Aug-29 01:51:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 01:51:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 01:51:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 01:51:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 01:51:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 01:51:46 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Aug-29 01:51:46 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 01:51:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 01:51:46 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Aug-29 01:51:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 01:51:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 01:51:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 01:51:46 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2008-Aug-29 01:51:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 01:51:46 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 01:51:46 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 01:51:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 01:51:46 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2008-Aug-29 01:51:46 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 01:51:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 01:51:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 01:51:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 01:51:46 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2008-Aug-29 01:51:46 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 01:51:46 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 01:51:46 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 01:51:46 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Aug-29 01:51:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 01:51:46 INFO2 take_data: Starting WAPP scan: 824200016 2008-Aug-29 01:51:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 01:51:46 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 01:51:46 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2008-Aug-29 01:51:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 01:51:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21107.00 2008-Aug-29 01:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 01:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:51:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:51:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 01:51:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 01:51:48 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2008-Aug-29 01:51:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 01:51:48 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2008-Aug-29 01:51:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 01:51:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 01:51:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 01:51:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 01:51:48 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2008-Aug-29 01:51:48 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 01:51:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 01:51:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 01:51:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 01:51:48 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2008-Aug-29 01:51:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 01:51:48 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 01:51:48 LOG5 finish_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2008-Aug-29 01:51:48 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 01:51:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 01:51:48 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 01:51:48 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2008-Aug-29 01:51:48 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2008-Aug-29 01:51:48 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2008-Aug-29 01:51:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 01:51:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 01:51:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 01:51:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 01:51:49 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 01:51:49 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 01:51:49 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 01:51:49 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 01:51:49 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Aug-29 01:51:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 01:51:49 INFO2 take_data: Starting WAPP scan: 824200017 2008-Aug-29 01:51:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 01:51:49 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 01:51:49 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Aug-29 01:51:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 01:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.535 (still bad) 2008-Aug-29 01:51:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 01:51:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21110.00 2008-Aug-29 01:51:49 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0008.fits 2008-Aug-29 01:51:49 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0008.fits} 2008-Aug-29 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:51:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 01:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.450 (still bad) 2008-Aug-29 01:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 01:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 01:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:52:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:52:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.106 1.087 1.063 2008-Aug-29 01:52:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.961 1.059 0.926 2008-Aug-29 01:52:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.920 1.062 0.949 2008-Aug-29 01:52:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.098 1.031 0.109 2008-Aug-29 01:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 01:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 01:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 01:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 01:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 01:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 01:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 01:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 01:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 01:53:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 01:53:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.102 1.087 1.065 2008-Aug-29 01:53:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.953 1.061 0.926 2008-Aug-29 01:53:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 0.921 1.063 0.950 2008-Aug-29 01:53:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.099 1.033 0.110 2008-Aug-29 01:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 01:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 01:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 01:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 01:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 01:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 01:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 01:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 01:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 01:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 01:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-29 01:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 01:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 01:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 01:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 01:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 01:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 01:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 01:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 01:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 01:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 01:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 01:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-29 01:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 01:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 01:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 01:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 01:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 01:54:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 01:54:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.102 1.092 1.066 2008-Aug-29 01:54:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.953 1.068 0.932 2008-Aug-29 01:54:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.125 0.934 1.068 0.952 2008-Aug-29 01:54:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.099 1.035 0.110 2008-Aug-29 01:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 01:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-29 01:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-29 01:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 01:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-29 01:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-29 01:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-29 01:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-29 01:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-29 01:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-29 01:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 01:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 01:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 01:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 01:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 01:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 01:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 01:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 01:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 01:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 01:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 01:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 01:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 01:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 01:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 01:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 01:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 01:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 01:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 01:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 01:55:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 01:55:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.100 1.087 1.062 2008-Aug-29 01:55:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.952 1.065 0.931 2008-Aug-29 01:55:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 0.923 1.065 0.948 2008-Aug-29 01:55:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.099 1.034 0.110 2008-Aug-29 01:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 01:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 01:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 01:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 01:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 01:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 01:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 01:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 01:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 01:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 01:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:56:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:56:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.101 1.086 1.062 2008-Aug-29 01:56:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.951 1.059 0.925 2008-Aug-29 01:56:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.919 1.066 0.949 2008-Aug-29 01:56:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.036 0.110 2008-Aug-29 01:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 01:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 01:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 01:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 01:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 01:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:57:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 01:57:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.086 1.105 1.088 1.062 2008-Aug-29 01:57:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.952 1.061 0.925 2008-Aug-29 01:57:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 0.920 1.065 0.949 2008-Aug-29 01:57:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.035 0.110 2008-Aug-29 01:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 01:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 01:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 01:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 01:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 01:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 01:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 01:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-29 01:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-29 01:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-29 01:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 01:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 01:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 01:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 01:58:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 01:58:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.102 1.090 1.063 2008-Aug-29 01:58:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.953 1.064 0.927 2008-Aug-29 01:58:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 0.921 1.067 0.951 2008-Aug-29 01:58:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.952 0.099 1.042 0.110 2008-Aug-29 01:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 01:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 01:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 01:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 01:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 01:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 01:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 01:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 01:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 01:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 01:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 01:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 01:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 01:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 01:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 01:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 01:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 01:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-29 01:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 01:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 01:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 01:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 01:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 01:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 01:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-29 01:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-29 01:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Aug-29 01:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-29 01:59:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 01:59:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.105 1.127 1.093 1.069 2008-Aug-29 01:59:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.958 0.973 1.069 0.937 2008-Aug-29 01:59:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.923 1.066 0.951 2008-Aug-29 01:59:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.099 1.035 0.110 2008-Aug-29 01:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 01:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-29 01:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 01:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 01:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-29 02:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 02:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:00:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 02:00:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.103 1.088 1.060 2008-Aug-29 02:00:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.954 1.062 0.925 2008-Aug-29 02:00:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 0.920 1.065 0.949 2008-Aug-29 02:00:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.035 0.110 2008-Aug-29 02:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 02:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 02:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 02:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 02:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:01:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:01:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.102 1.089 1.063 2008-Aug-29 02:01:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.952 1.061 0.927 2008-Aug-29 02:01:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.921 1.064 0.951 2008-Aug-29 02:01:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.099 1.037 0.110 2008-Aug-29 02:01:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 02:01:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 02:01:50 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2008-Aug-29 02:01:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 02:01:50 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2008-Aug-29 02:01:50 LOG1 fixed_driftmap: New position: year = 2008.6627915304077 RA = 00:05:37.4 RA/Dec = 00:06:05.9 +03:49:23.7 2008-Aug-29 02:01:50 NOTE fixed_driftmap: Correcting ZA to 14:31:50.0 ... 2008-Aug-29 02:01:50 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5305615885 -CF 2008-Aug-29 02:01:50 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 02:01:50 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 02:01:50 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2008-Aug-29 02:01:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 02:01:50 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 02:01:50 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Aug-29 02:01:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 02:01:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 02:01:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 02:01:50 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 02:01:50 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2008-Aug-29 02:01:50 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5305615885 -CF 2008-Aug-29 02:01:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:01:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 02:01:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 02:01:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:01:50 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 02:01:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 02:01:50 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2008-Aug-29 02:01:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 02:01:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 02:01:50 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 02:01:50 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 02:01:50 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2008-Aug-29 02:01:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:01:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 02:01:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 02:01:51 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2008-Aug-29 02:01:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 02:01:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 02:01:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 02:01:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 02:01:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 02:01:51 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2008-Aug-29 02:01:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 02:01:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 02:01:51 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2008-Aug-29 02:01:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 02:01:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 02:01:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 02:01:51 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2008-Aug-29 02:01:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 02:01:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 02:01:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 02:01:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 02:01:51 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Aug-29 02:01:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 02:01:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 02:01:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 02:01:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 02:01:51 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Aug-29 02:01:51 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 02:01:51 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 02:01:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 02:01:51 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Aug-29 02:01:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 02:01:51 INFO2 take_data: Starting WAPP scan: 824200018 2008-Aug-29 02:01:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 02:01:51 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 02:01:51 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2008-Aug-29 02:01:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 02:01:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21712.00 2008-Aug-29 02:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 02:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:01:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:01:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 02:01:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 02:01:53 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2008-Aug-29 02:01:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 02:01:53 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2008-Aug-29 02:01:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 02:01:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 02:01:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 02:01:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 02:01:53 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Aug-29 02:01:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 02:01:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 02:01:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 02:01:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 02:01:54 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2008-Aug-29 02:01:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 02:01:54 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 02:01:54 LOG5 finish_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2008-Aug-29 02:01:54 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 02:01:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 02:01:54 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 02:01:54 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2008-Aug-29 02:01:54 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2008-Aug-29 02:01:54 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2008-Aug-29 02:01:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 02:01:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 02:01:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 02:01:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 02:01:54 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 02:01:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 02:01:54 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 02:01:54 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 02:01:54 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Aug-29 02:01:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 02:01:54 INFO2 take_data: Starting WAPP scan: 824200019 2008-Aug-29 02:01:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 02:01:54 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 02:01:54 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Aug-29 02:01:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 02:01:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 02:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.540 (still bad) 2008-Aug-29 02:01:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21715.00 2008-Aug-29 02:01:54 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0009.fits 2008-Aug-29 02:01:54 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0009.fits} 2008-Aug-29 02:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 02:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:01:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 02:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:02:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:02:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.104 1.089 1.062 2008-Aug-29 02:02:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.953 1.064 0.927 2008-Aug-29 02:02:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.920 1.070 0.952 2008-Aug-29 02:02:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.099 1.035 0.110 2008-Aug-29 02:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 02:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:03:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:03:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.086 1.103 1.092 1.065 2008-Aug-29 02:03:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.955 1.066 0.930 2008-Aug-29 02:03:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.921 1.064 0.951 2008-Aug-29 02:03:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.099 1.038 0.110 2008-Aug-29 02:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-29 02:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:04:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:04:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.084 1.102 1.089 1.063 2008-Aug-29 02:04:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.956 1.063 0.925 2008-Aug-29 02:04:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.921 1.065 0.950 2008-Aug-29 02:04:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.099 1.038 0.110 2008-Aug-29 02:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 02:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 02:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 02:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:05:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-29 02:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-29 02:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:05:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:05:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.104 1.089 1.064 2008-Aug-29 02:05:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.954 1.066 0.929 2008-Aug-29 02:05:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 0.919 1.066 0.951 2008-Aug-29 02:05:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.099 1.035 0.110 2008-Aug-29 02:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:06:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:06:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.105 1.091 1.064 2008-Aug-29 02:06:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.952 1.062 0.925 2008-Aug-29 02:06:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.916 1.072 0.956 2008-Aug-29 02:06:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.099 1.035 0.110 2008-Aug-29 02:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Aug-29 02:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:07:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:07:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.084 1.106 1.088 1.066 2008-Aug-29 02:07:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.951 1.064 0.927 2008-Aug-29 02:07:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.912 1.064 0.946 2008-Aug-29 02:07:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.099 1.034 0.110 2008-Aug-29 02:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Aug-29 02:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Aug-29 02:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2008-Aug-29 02:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Aug-29 02:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 02:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Aug-29 02:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2008-Aug-29 02:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 02:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2008-Aug-29 02:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 02:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2008-Aug-29 02:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Aug-29 02:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Aug-29 02:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 02:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 02:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-29 02:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2008-Aug-29 02:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 02:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 02:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 02:08:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:08:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.084 1.104 1.091 1.067 2008-Aug-29 02:08:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.949 1.059 0.924 2008-Aug-29 02:08:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.100 0.910 1.067 0.944 2008-Aug-29 02:08:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.099 1.035 0.109 2008-Aug-29 02:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 02:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 02:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2008-Aug-29 02:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2008-Aug-29 02:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Aug-29 02:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Aug-29 02:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 02:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 02:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Aug-29 02:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Aug-29 02:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 02:10:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:10:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.105 1.090 1.062 2008-Aug-29 02:10:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.950 1.063 0.925 2008-Aug-29 02:10:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.913 1.073 0.953 2008-Aug-29 02:10:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.099 1.032 0.109 2008-Aug-29 02:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-29 02:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-29 02:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:11:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:11:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.099 1.119 1.092 1.066 2008-Aug-29 02:11:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.951 1.068 0.928 2008-Aug-29 02:11:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.915 1.065 0.949 2008-Aug-29 02:11:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.099 1.035 0.110 2008-Aug-29 02:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 02:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-29 02:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 02:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 02:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:11:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 02:11:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 02:11:55 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2008-Aug-29 02:11:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 02:11:55 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2008-Aug-29 02:11:55 LOG1 fixed_driftmap: New position: year = 2008.6628107017009 RA = 00:15:44.1 RA/Dec = 00:16:12.6 +03:49:23.6 2008-Aug-29 02:11:55 NOTE fixed_driftmap: Correcting ZA to 14:31:50.1 ... 2008-Aug-29 02:11:55 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5305905925 -CF 2008-Aug-29 02:11:55 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 02:11:55 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 02:11:55 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Aug-29 02:11:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 02:11:55 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 02:11:55 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Aug-29 02:11:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 02:11:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 02:11:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 02:11:55 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 02:11:55 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Aug-29 02:11:55 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5305905925 -CF 2008-Aug-29 02:11:55 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:11:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 02:11:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 02:11:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:11:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 02:11:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 02:11:56 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2008-Aug-29 02:11:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 02:11:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 02:11:56 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 02:11:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 02:11:56 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2008-Aug-29 02:11:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:11:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 02:11:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 02:11:56 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2008-Aug-29 02:11:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 02:11:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 02:11:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 02:11:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 02:11:56 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 02:11:56 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Aug-29 02:11:56 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 02:11:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 02:11:56 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Aug-29 02:11:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 02:11:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 02:11:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 02:11:56 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2008-Aug-29 02:11:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 02:11:56 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 02:11:56 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 02:11:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 02:11:56 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2008-Aug-29 02:11:56 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 02:11:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 02:11:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 02:11:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 02:11:56 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2008-Aug-29 02:11:56 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 02:11:56 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 02:11:56 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 02:11:56 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2008-Aug-29 02:11:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 02:11:56 INFO2 take_data: Starting WAPP scan: 824200020 2008-Aug-29 02:11:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 02:11:56 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 02:11:56 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2008-Aug-29 02:11:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 02:11:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22317.00 2008-Aug-29 02:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 02:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:11:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:11:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 02:11:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 02:11:58 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2008-Aug-29 02:11:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 02:11:58 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2008-Aug-29 02:11:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 02:11:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 02:11:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 02:11:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 02:11:58 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Aug-29 02:11:58 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 02:11:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 02:11:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 02:11:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 02:11:58 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2008-Aug-29 02:11:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 02:11:58 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 02:11:58 LOG5 finish_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Aug-29 02:11:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 02:11:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 02:11:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 02:11:58 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2008-Aug-29 02:11:58 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2008-Aug-29 02:11:58 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2008-Aug-29 02:11:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 02:11:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 02:11:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 02:11:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 02:11:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 02:11:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 02:11:59 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 02:11:59 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 02:11:59 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2008-Aug-29 02:11:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 02:11:59 INFO2 take_data: Starting WAPP scan: 824200021 2008-Aug-29 02:11:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 02:11:59 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 02:11:59 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Aug-29 02:11:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 02:11:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 02:11:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22320.00 2008-Aug-29 02:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.535 (still bad) 2008-Aug-29 02:11:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0010.fits 2008-Aug-29 02:11:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0010.fits} 2008-Aug-29 02:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 02:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:12:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:12:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:12:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.105 1.092 1.067 2008-Aug-29 02:12:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.954 1.063 0.927 2008-Aug-29 02:12:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.918 1.068 0.950 2008-Aug-29 02:12:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.099 1.036 0.110 2008-Aug-29 02:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 02:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 02:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:13:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:13:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.086 1.105 1.097 1.071 2008-Aug-29 02:13:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.953 1.072 0.933 2008-Aug-29 02:13:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.917 1.066 0.951 2008-Aug-29 02:13:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.099 1.035 0.109 2008-Aug-29 02:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 02:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 02:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 02:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 02:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 02:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 02:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 02:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 02:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 02:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 02:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 02:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 02:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:14:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 02:14:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.107 1.090 1.066 2008-Aug-29 02:14:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.950 1.065 0.928 2008-Aug-29 02:14:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.913 1.065 0.947 2008-Aug-29 02:14:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.037 0.109 2008-Aug-29 02:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 02:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 02:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 02:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 02:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 02:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 02:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 02:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 02:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2008-Aug-29 02:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 02:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 02:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:15:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:15:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.087 1.112 1.090 1.065 2008-Aug-29 02:15:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.951 1.061 0.925 2008-Aug-29 02:15:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.912 1.066 0.947 2008-Aug-29 02:15:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.099 1.034 0.110 2008-Aug-29 02:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 02:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2008-Aug-29 02:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 02:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 02:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:16:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:16:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.106 1.092 1.066 2008-Aug-29 02:16:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.951 1.063 0.926 2008-Aug-29 02:16:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.914 1.073 0.955 2008-Aug-29 02:16:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.099 1.033 0.109 2008-Aug-29 02:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 02:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 02:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 02:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 02:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 02:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 02:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 02:16:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2008-Aug-29 02:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-29 02:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:17:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 02:17:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 1.109 1.089 1.067 2008-Aug-29 02:17:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.955 1.066 0.928 2008-Aug-29 02:17:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.917 1.066 0.950 2008-Aug-29 02:17:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.098 1.034 0.109 2008-Aug-29 02:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 02:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 02:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2008-Aug-29 02:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2008-Aug-29 02:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 02:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2008-Aug-29 02:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:18:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:18:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.107 1.090 1.067 2008-Aug-29 02:18:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.954 1.066 0.929 2008-Aug-29 02:18:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.921 1.071 0.953 2008-Aug-29 02:18:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.099 1.036 0.109 2008-Aug-29 02:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 02:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2008-Aug-29 02:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:19:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 02:19:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.107 1.092 1.063 2008-Aug-29 02:19:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.956 1.068 0.929 2008-Aug-29 02:19:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 0.921 1.069 0.952 2008-Aug-29 02:19:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.036 0.109 2008-Aug-29 02:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 02:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 02:20:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:20:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.086 1.108 1.092 1.066 2008-Aug-29 02:20:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 0.957 1.066 0.928 2008-Aug-29 02:20:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.923 1.071 0.952 2008-Aug-29 02:20:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.099 1.037 0.110 2008-Aug-29 02:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 02:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 02:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 02:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 02:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 02:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 02:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 02:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 02:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 02:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-29 02:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 02:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:21:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 02:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 02:21:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 02:21:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.087 1.109 1.089 1.065 2008-Aug-29 02:21:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.963 1.065 0.929 2008-Aug-29 02:21:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.924 1.075 0.961 2008-Aug-29 02:21:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.040 0.110 2008-Aug-29 02:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-29 02:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-29 02:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 02:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 02:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 02:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:22:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 02:22:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 02:22:00 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2008-Aug-29 02:22:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 02:22:00 LOG5 end_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2008-Aug-29 02:22:00 LOG1 fixed_driftmap: New position: year = 2008.6628298729941 RA = 00:25:50.7 RA/Dec = 00:26:19.3 +03:49:23.1 2008-Aug-29 02:22:00 NOTE fixed_driftmap: Correcting ZA to 14:31:50.6 ... 2008-Aug-29 02:22:00 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5307158549 -CF 2008-Aug-29 02:22:00 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 02:22:00 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 02:22:00 LOG5 begin_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2008-Aug-29 02:22:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 02:22:00 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 02:22:00 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Aug-29 02:22:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 02:22:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 02:22:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 02:22:00 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 02:22:00 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Aug-29 02:22:00 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5307158549 -CF 2008-Aug-29 02:22:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:22:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 02:22:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 02:22:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:22:00 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 02:22:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 02:22:00 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2008-Aug-29 02:22:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 02:22:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 02:22:00 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 02:22:00 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 02:22:00 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2008-Aug-29 02:22:00 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:22:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 02:22:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 02:22:01 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2008-Aug-29 02:22:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 02:22:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 02:22:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 02:22:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 02:22:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 02:22:01 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Aug-29 02:22:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 02:22:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 02:22:01 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Aug-29 02:22:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 02:22:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 02:22:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 02:22:01 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2008-Aug-29 02:22:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 02:22:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 02:22:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 02:22:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 02:22:01 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-Aug-29 02:22:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 02:22:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 02:22:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 02:22:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 02:22:01 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-Aug-29 02:22:01 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 02:22:01 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 02:22:01 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 02:22:01 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Aug-29 02:22:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 02:22:01 INFO2 take_data: Starting WAPP scan: 824200022 2008-Aug-29 02:22:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 02:22:01 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 02:22:01 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2008-Aug-29 02:22:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 02:22:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22922.00 2008-Aug-29 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:22:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:22:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 02:22:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 02:22:03 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2008-Aug-29 02:22:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 02:22:03 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2008-Aug-29 02:22:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 02:22:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 02:22:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 02:22:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 02:22:03 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Aug-29 02:22:04 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 02:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.547 (still bad) 2008-Aug-29 02:22:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 02:22:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 02:22:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 02:22:04 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2008-Aug-29 02:22:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 02:22:04 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 02:22:04 LOG5 finish_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2008-Aug-29 02:22:04 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 02:22:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 02:22:04 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 02:22:04 LOG5 end_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2008-Aug-29 02:22:04 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2008-Aug-29 02:22:04 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2008-Aug-29 02:22:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 02:22:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 02:22:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 02:22:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 02:22:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 02:22:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 02:22:04 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 02:22:04 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 02:22:04 LOG5 begin_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2008-Aug-29 02:22:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 02:22:04 INFO2 take_data: Starting WAPP scan: 824200023 2008-Aug-29 02:22:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 02:22:04 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 02:22:04 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2008-Aug-29 02:22:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 02:22:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 02:22:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22925.00 2008-Aug-29 02:22:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0011.fits 2008-Aug-29 02:22:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0011.fits} 2008-Aug-29 02:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 02:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:22:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:22:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:22:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.089 1.110 1.091 1.066 2008-Aug-29 02:22:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.958 1.069 0.931 2008-Aug-29 02:22:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.925 1.073 0.957 2008-Aug-29 02:22:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.099 1.039 0.110 2008-Aug-29 02:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-29 02:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 02:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-29 02:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Aug-29 02:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Aug-29 02:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Aug-29 02:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Aug-29 02:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Aug-29 02:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-29 02:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:23:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:23:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.087 1.110 1.093 1.067 2008-Aug-29 02:23:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.958 1.071 0.933 2008-Aug-29 02:23:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.118 0.924 1.073 0.957 2008-Aug-29 02:23:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.952 0.099 1.041 0.110 2008-Aug-29 02:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-29 02:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-29 02:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:24:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:24:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.087 1.112 1.093 1.067 2008-Aug-29 02:24:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 0.960 1.067 0.930 2008-Aug-29 02:24:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 0.923 1.073 0.956 2008-Aug-29 02:24:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.099 1.041 0.110 2008-Aug-29 02:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:25:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:25:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.089 1.112 1.092 1.068 2008-Aug-29 02:25:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.959 1.067 0.930 2008-Aug-29 02:25:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.923 1.072 0.957 2008-Aug-29 02:25:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.099 1.040 0.110 2008-Aug-29 02:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-29 02:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-29 02:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-29 02:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-29 02:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-29 02:26:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:26:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.090 1.111 1.095 1.069 2008-Aug-29 02:26:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.964 1.067 0.929 2008-Aug-29 02:26:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.925 1.073 0.961 2008-Aug-29 02:26:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.953 0.099 1.043 0.110 2008-Aug-29 02:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-29 02:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Aug-29 02:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Aug-29 02:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.156 (still bad) 2008-Aug-29 02:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.159 (still bad) 2008-Aug-29 02:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.157 (still bad) 2008-Aug-29 02:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Aug-29 02:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Aug-29 02:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 02:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:27:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:27:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.114 1.095 1.066 2008-Aug-29 02:27:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.964 0.972 1.068 0.930 2008-Aug-29 02:27:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.925 1.073 0.958 2008-Aug-29 02:27:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.952 0.099 1.043 0.110 2008-Aug-29 02:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:28:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:28:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.116 1.097 1.070 2008-Aug-29 02:28:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.959 1.071 0.930 2008-Aug-29 02:28:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.927 1.073 0.957 2008-Aug-29 02:28:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.099 1.046 0.110 2008-Aug-29 02:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 02:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 02:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:29:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:29:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 1.115 1.095 1.067 2008-Aug-29 02:29:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.959 1.070 0.931 2008-Aug-29 02:29:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.927 1.073 0.958 2008-Aug-29 02:29:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.099 1.052 0.110 2008-Aug-29 02:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-29 02:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 02:30:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 02:30:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.111 1.129 1.095 1.068 2008-Aug-29 02:30:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.957 1.069 0.928 2008-Aug-29 02:30:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 0.920 1.072 0.954 2008-Aug-29 02:30:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.040 0.110 2008-Aug-29 02:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-29 02:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-29 02:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 02:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-29 02:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 02:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:31:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:31:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.110 1.095 1.069 2008-Aug-29 02:31:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.959 1.072 0.930 2008-Aug-29 02:31:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 0.916 1.071 0.952 2008-Aug-29 02:31:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.099 1.040 0.110 2008-Aug-29 02:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-29 02:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-29 02:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:32:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 02:32:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 02:32:05 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2008-Aug-29 02:32:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 02:32:05 LOG5 end_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2008-Aug-29 02:32:05 LOG1 fixed_driftmap: New position: year = 2008.6628490442872 RA = 00:35:57.4 RA/Dec = 00:36:25.9 +03:49:22.3 2008-Aug-29 02:32:05 NOTE fixed_driftmap: Correcting ZA to 14:31:51.4 ... 2008-Aug-29 02:32:05 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5309371325 -CF 2008-Aug-29 02:32:05 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 02:32:05 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 02:32:05 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2008-Aug-29 02:32:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 02:32:05 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 02:32:05 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Aug-29 02:32:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 02:32:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 02:32:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 02:32:05 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 02:32:05 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Aug-29 02:32:05 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5309371325 -CF 2008-Aug-29 02:32:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:32:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 02:32:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 02:32:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:32:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 02:32:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 02:32:06 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2008-Aug-29 02:32:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 02:32:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 02:32:06 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 02:32:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 02:32:06 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2008-Aug-29 02:32:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:32:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 02:32:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 02:32:06 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2008-Aug-29 02:32:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 02:32:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 02:32:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 02:32:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 02:32:06 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 02:32:06 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Aug-29 02:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:32:06 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 02:32:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 02:32:06 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Aug-29 02:32:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 02:32:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 02:32:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 02:32:06 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2008-Aug-29 02:32:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 02:32:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 02:32:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 02:32:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 02:32:06 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Aug-29 02:32:06 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 02:32:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 02:32:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 02:32:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 02:32:06 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Aug-29 02:32:06 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 02:32:06 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 02:32:06 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 02:32:06 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Aug-29 02:32:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 02:32:06 INFO2 take_data: Starting WAPP scan: 824200024 2008-Aug-29 02:32:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 02:32:06 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 02:32:06 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Aug-29 02:32:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 02:32:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23527.00 2008-Aug-29 02:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 02:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:32:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:32:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 02:32:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 02:32:08 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2008-Aug-29 02:32:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 02:32:08 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2008-Aug-29 02:32:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 02:32:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 02:32:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 02:32:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 02:32:08 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Aug-29 02:32:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 02:32:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 02:32:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 02:32:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 02:32:08 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2008-Aug-29 02:32:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 02:32:08 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 02:32:08 LOG5 finish_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2008-Aug-29 02:32:08 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 02:32:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 02:32:08 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 02:32:08 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2008-Aug-29 02:32:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2008-Aug-29 02:32:08 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2008-Aug-29 02:32:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 02:32:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 02:32:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 02:32:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 02:32:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 02:32:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 02:32:09 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 02:32:09 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 02:32:09 LOG5 begin_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2008-Aug-29 02:32:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 02:32:09 INFO2 take_data: Starting WAPP scan: 824200025 2008-Aug-29 02:32:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 02:32:09 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 02:32:09 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Aug-29 02:32:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 02:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.532 (still bad) 2008-Aug-29 02:32:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 02:32:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23530.00 2008-Aug-29 02:32:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0012.fits 2008-Aug-29 02:32:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0012.fits} 2008-Aug-29 02:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 02:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:32:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.493 (still bad) 2008-Aug-29 02:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2008-Aug-29 02:32:21 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 02:32:21.303 (seconds: 9141.303)!} 2008-Aug-29 02:32:21 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 02:32:21.303 (seconds: 9141.303)! 2008-Aug-29 02:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:32:22 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 9140.0 to 9141.0! 2008-Aug-29 02:32:23 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (9140.0 - 9142.0)! 2008-Aug-29 02:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:32:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:32:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.089 1.107 1.096 1.066 2008-Aug-29 02:32:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.952 1.068 0.927 2008-Aug-29 02:32:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 0.920 1.072 0.949 2008-Aug-29 02:32:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.099 1.039 0.110 2008-Aug-29 02:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.111 (still bad) 2008-Aug-29 02:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2008-Aug-29 02:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:33:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:33:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.110 1.096 1.069 2008-Aug-29 02:33:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 0.954 1.070 0.927 2008-Aug-29 02:33:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.916 1.072 0.952 2008-Aug-29 02:33:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.099 1.040 0.110 2008-Aug-29 02:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 02:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:34:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:34:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.110 1.096 1.067 2008-Aug-29 02:34:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.957 1.071 0.928 2008-Aug-29 02:34:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.920 1.075 0.956 2008-Aug-29 02:34:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.099 1.042 0.110 2008-Aug-29 02:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:35:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:35:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.112 1.097 1.068 2008-Aug-29 02:35:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.957 1.072 0.931 2008-Aug-29 02:35:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.923 1.073 0.956 2008-Aug-29 02:35:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.099 1.041 0.110 2008-Aug-29 02:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:36:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:36:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.108 1.097 1.069 2008-Aug-29 02:36:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.957 1.070 0.929 2008-Aug-29 02:36:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.924 1.073 0.955 2008-Aug-29 02:36:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.953 0.099 1.044 0.110 2008-Aug-29 02:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-29 02:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:37:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:37:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.113 1.099 1.067 2008-Aug-29 02:37:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.956 1.070 0.928 2008-Aug-29 02:37:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 0.923 1.074 0.956 2008-Aug-29 02:37:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.099 1.044 0.110 2008-Aug-29 02:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:38:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:38:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.111 1.098 1.069 2008-Aug-29 02:38:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.957 1.073 0.929 2008-Aug-29 02:38:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.926 1.074 0.957 2008-Aug-29 02:38:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.099 1.043 0.110 2008-Aug-29 02:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:39:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:39:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.109 1.096 1.068 2008-Aug-29 02:39:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.957 1.073 0.929 2008-Aug-29 02:39:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.925 1.076 0.957 2008-Aug-29 02:39:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.099 1.046 0.110 2008-Aug-29 02:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 02:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 02:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 02:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 02:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 02:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:40:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:40:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.108 1.096 1.068 2008-Aug-29 02:40:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.957 1.075 0.930 2008-Aug-29 02:40:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.924 1.075 0.957 2008-Aug-29 02:40:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.099 1.045 0.110 2008-Aug-29 02:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-29 02:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:41:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:41:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.110 1.098 1.067 2008-Aug-29 02:41:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.957 1.073 0.928 2008-Aug-29 02:41:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.924 1.095 0.975 2008-Aug-29 02:41:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.099 1.047 0.110 2008-Aug-29 02:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 02:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 02:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 02:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-29 02:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 02:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 02:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 02:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 02:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 02:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:42:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 02:42:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 02:42:10 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2008-Aug-29 02:42:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 02:42:10 LOG5 end_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2008-Aug-29 02:42:10 LOG1 fixed_driftmap: New position: year = 2008.6628682155804 RA = 00:46:04.0 RA/Dec = 00:46:32.6 +03:49:21.2 2008-Aug-29 02:42:10 NOTE fixed_driftmap: Correcting ZA to 14:31:52.5 ... 2008-Aug-29 02:42:10 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5312539936 -CF 2008-Aug-29 02:42:10 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 02:42:10 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 02:42:10 LOG5 begin_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2008-Aug-29 02:42:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 02:42:10 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 02:42:10 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Aug-29 02:42:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 02:42:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 02:42:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 02:42:10 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 02:42:10 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Aug-29 02:42:10 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5312539936 -CF 2008-Aug-29 02:42:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:42:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 02:42:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 02:42:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:42:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 02:42:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 02:42:10 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2008-Aug-29 02:42:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 02:42:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 02:42:10 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 02:42:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 02:42:10 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Aug-29 02:42:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:42:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 02:42:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 02:42:11 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2008-Aug-29 02:42:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 02:42:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 02:42:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 02:42:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 02:42:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 02:42:11 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2008-Aug-29 02:42:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 02:42:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 02:42:11 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2008-Aug-29 02:42:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 02:42:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 02:42:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 02:42:11 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2008-Aug-29 02:42:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 02:42:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 02:42:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 02:42:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 02:42:11 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Aug-29 02:42:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 02:42:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 02:42:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 02:42:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 02:42:11 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Aug-29 02:42:11 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 02:42:11 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 02:42:11 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 02:42:11 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2008-Aug-29 02:42:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 02:42:11 INFO2 take_data: Starting WAPP scan: 824200026 2008-Aug-29 02:42:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 02:42:11 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 02:42:11 LOG5 begin_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Aug-29 02:42:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 02:42:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24132.00 2008-Aug-29 02:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 02:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:42:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:42:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 02:42:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 02:42:13 LOG5 end_task: Level: (4) ID = <10177> Status = 0 0 0 0 ok 2008-Aug-29 02:42:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 02:42:13 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2008-Aug-29 02:42:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 02:42:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 02:42:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 02:42:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 02:42:13 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Aug-29 02:42:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 02:42:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 02:42:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 02:42:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 02:42:14 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2008-Aug-29 02:42:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 02:42:14 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 02:42:14 LOG5 finish_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2008-Aug-29 02:42:14 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 02:42:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 02:42:14 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 02:42:14 LOG5 end_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2008-Aug-29 02:42:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2008-Aug-29 02:42:14 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2008-Aug-29 02:42:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 02:42:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 02:42:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 02:42:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 02:42:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 02:42:14 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 02:42:14 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 02:42:14 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 02:42:14 LOG5 begin_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2008-Aug-29 02:42:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 02:42:14 INFO2 take_data: Starting WAPP scan: 824200027 2008-Aug-29 02:42:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 02:42:14 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 02:42:14 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Aug-29 02:42:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 02:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.552 (still bad) 2008-Aug-29 02:42:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 02:42:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24135.00 2008-Aug-29 02:42:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0013.fits 2008-Aug-29 02:42:14 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0013.fits} 2008-Aug-29 02:42:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 02:42:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:42:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:42:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:42:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:42:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:42:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:42:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:42:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.453 (still bad) 2008-Aug-29 02:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:42:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:42:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.110 1.097 1.068 2008-Aug-29 02:42:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.961 1.072 0.929 2008-Aug-29 02:42:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.923 1.076 0.956 2008-Aug-29 02:42:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.099 1.044 0.110 2008-Aug-29 02:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:43:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 02:43:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.110 1.098 1.066 2008-Aug-29 02:43:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.958 1.072 0.929 2008-Aug-29 02:43:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.925 1.074 0.957 2008-Aug-29 02:43:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.098 1.049 0.110 2008-Aug-29 02:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-29 02:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 02:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 02:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-29 02:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Aug-29 02:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Aug-29 02:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-29 02:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-29 02:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 02:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 02:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 02:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-29 02:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:44:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:44:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.110 1.095 1.067 2008-Aug-29 02:44:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.958 1.073 0.929 2008-Aug-29 02:44:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.923 1.073 0.956 2008-Aug-29 02:44:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.099 1.046 0.110 2008-Aug-29 02:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:45:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:45:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.110 1.096 1.065 2008-Aug-29 02:45:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.958 1.075 0.930 2008-Aug-29 02:45:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.923 1.076 0.957 2008-Aug-29 02:45:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.099 1.046 0.110 2008-Aug-29 02:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:46:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:46:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.106 1.098 1.065 2008-Aug-29 02:46:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.957 1.074 0.930 2008-Aug-29 02:46:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.925 1.078 0.958 2008-Aug-29 02:46:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.956 0.099 1.045 0.110 2008-Aug-29 02:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:47:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:47:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.090 1.110 1.098 1.066 2008-Aug-29 02:47:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.956 1.071 0.927 2008-Aug-29 02:47:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.923 1.075 0.956 2008-Aug-29 02:47:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.099 1.044 0.110 2008-Aug-29 02:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 02:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:48:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:48:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.109 1.097 1.064 2008-Aug-29 02:48:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.958 1.072 0.928 2008-Aug-29 02:48:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.925 1.078 0.955 2008-Aug-29 02:48:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.099 1.046 0.110 2008-Aug-29 02:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 02:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 02:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:49:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:49:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.097 1.114 1.097 1.066 2008-Aug-29 02:49:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.958 1.073 0.929 2008-Aug-29 02:49:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.925 1.080 0.958 2008-Aug-29 02:49:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.099 1.047 0.110 2008-Aug-29 02:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 02:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 02:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 02:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 02:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 02:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 02:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 02:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 02:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:50:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:50:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.112 1.100 1.066 2008-Aug-29 02:50:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.957 1.074 0.930 2008-Aug-29 02:50:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.925 1.078 0.961 2008-Aug-29 02:50:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.956 0.099 1.047 0.110 2008-Aug-29 02:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:51:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:51:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.112 1.099 1.066 2008-Aug-29 02:51:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.954 1.078 0.933 2008-Aug-29 02:51:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 0.921 1.076 0.954 2008-Aug-29 02:51:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.099 1.045 0.110 2008-Aug-29 02:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:52:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 02:52:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 02:52:15 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2008-Aug-29 02:52:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 02:52:15 LOG5 end_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2008-Aug-29 02:52:15 LOG1 fixed_driftmap: New position: year = 2008.6628873868735 RA = 00:56:10.7 RA/Dec = 00:56:39.2 +03:49:19.7 2008-Aug-29 02:52:15 NOTE fixed_driftmap: Correcting ZA to 14:31:54.0 ... 2008-Aug-29 02:52:15 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5316658233 -CF 2008-Aug-29 02:52:15 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 02:52:15 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 02:52:15 LOG5 begin_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2008-Aug-29 02:52:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 02:52:15 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 02:52:15 LOG5 begin_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-Aug-29 02:52:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 02:52:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 02:52:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 02:52:15 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 02:52:15 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Aug-29 02:52:15 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5316658233 -CF 2008-Aug-29 02:52:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:52:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 02:52:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 02:52:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:52:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 02:52:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 02:52:16 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2008-Aug-29 02:52:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 02:52:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 02:52:16 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 02:52:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 02:52:16 LOG5 begin_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Aug-29 02:52:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 02:52:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 02:52:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 02:52:16 LOG5 end_task: Level: (4) ID = <10184> Status = 0 0 0 0 ok 2008-Aug-29 02:52:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 02:52:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 02:52:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 02:52:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 02:52:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 02:52:16 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Aug-29 02:52:16 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 02:52:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 02:52:16 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Aug-29 02:52:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 02:52:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 02:52:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 02:52:16 LOG5 end_task: Level: (3) ID = <10182> Status = 0 0 0 0 ok 2008-Aug-29 02:52:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 02:52:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 02:52:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 02:52:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 02:52:16 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Aug-29 02:52:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 02:52:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 02:52:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 02:52:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 02:52:16 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Aug-29 02:52:16 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 02:52:16 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 02:52:16 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 02:52:16 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Aug-29 02:52:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 02:52:16 INFO2 take_data: Starting WAPP scan: 824200028 2008-Aug-29 02:52:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 02:52:16 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 02:52:16 LOG5 begin_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Aug-29 02:52:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 02:52:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24737.00 2008-Aug-29 02:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:52:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 02:52:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:52:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:52:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:52:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:52:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:52:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:52:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:52:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:52:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 02:52:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 02:52:18 LOG5 end_task: Level: (4) ID = <10188> Status = 0 0 0 0 ok 2008-Aug-29 02:52:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 02:52:18 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2008-Aug-29 02:52:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 02:52:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 02:52:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 02:52:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 02:52:18 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2008-Aug-29 02:52:18 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 02:52:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 02:52:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 02:52:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 02:52:18 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2008-Aug-29 02:52:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 02:52:18 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 02:52:18 LOG5 finish_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2008-Aug-29 02:52:18 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 02:52:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 02:52:18 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 02:52:18 LOG5 end_task: Level: (2) ID = <10181> Status = 0 0 0 0 ok 2008-Aug-29 02:52:18 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2008-Aug-29 02:52:18 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2008-Aug-29 02:52:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 02:52:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 02:52:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 02:52:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 02:52:19 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 02:52:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 02:52:19 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 02:52:19 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 02:52:19 LOG5 begin_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2008-Aug-29 02:52:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 02:52:19 INFO2 take_data: Starting WAPP scan: 824200029 2008-Aug-29 02:52:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 02:52:19 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 02:52:19 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2008-Aug-29 02:52:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 02:52:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 02:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.543 (still bad) 2008-Aug-29 02:52:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24740.00 2008-Aug-29 02:52:19 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0014.fits 2008-Aug-29 02:52:19 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0014.fits} 2008-Aug-29 02:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 02:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:52:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 02:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.495 (still bad) 2008-Aug-29 02:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:52:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:52:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.111 1.098 1.066 2008-Aug-29 02:52:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.952 1.071 0.927 2008-Aug-29 02:52:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.917 1.075 0.952 2008-Aug-29 02:52:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.099 1.043 0.110 2008-Aug-29 02:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:53:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:53:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.109 1.096 1.065 2008-Aug-29 02:53:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.952 1.070 0.926 2008-Aug-29 02:53:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.916 1.076 0.952 2008-Aug-29 02:53:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.099 1.041 0.110 2008-Aug-29 02:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-29 02:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:54:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:54:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.111 1.097 1.066 2008-Aug-29 02:54:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.953 1.071 0.928 2008-Aug-29 02:54:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.917 1.080 0.958 2008-Aug-29 02:54:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.099 1.041 0.110 2008-Aug-29 02:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-29 02:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:56:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:56:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.112 1.094 1.065 2008-Aug-29 02:56:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.956 1.073 0.929 2008-Aug-29 02:56:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 0.921 1.074 0.954 2008-Aug-29 02:56:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.099 1.041 0.110 2008-Aug-29 02:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-29 02:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 02:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 02:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 02:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 02:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:57:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:57:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.114 1.097 1.068 2008-Aug-29 02:57:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.955 1.069 0.927 2008-Aug-29 02:57:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.926 1.078 0.958 2008-Aug-29 02:57:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.953 0.099 1.042 0.110 2008-Aug-29 02:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 02:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 02:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 02:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 02:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:58:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:58:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.088 1.114 1.099 1.068 2008-Aug-29 02:58:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.955 1.071 0.930 2008-Aug-29 02:58:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.924 1.076 0.959 2008-Aug-29 02:58:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.099 1.044 0.110 2008-Aug-29 02:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 02:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 02:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-29 02:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-29 02:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-29 02:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 02:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 02:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 02:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:59:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 02:59:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.086 1.113 1.096 1.068 2008-Aug-29 02:59:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.957 1.076 0.933 2008-Aug-29 02:59:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.924 1.078 0.959 2008-Aug-29 02:59:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.958 0.099 1.048 0.110 2008-Aug-29 02:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 02:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 02:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 02:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 02:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 02:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 02:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:00:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:00:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.115 1.098 1.067 2008-Aug-29 03:00:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.959 1.071 0.930 2008-Aug-29 03:00:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.926 1.080 0.959 2008-Aug-29 03:00:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.099 1.045 0.110 2008-Aug-29 03:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:01:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:01:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.113 1.095 1.067 2008-Aug-29 03:01:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.959 1.079 0.935 2008-Aug-29 03:01:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.924 1.079 0.959 2008-Aug-29 03:01:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.956 0.099 1.046 0.110 2008-Aug-29 03:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:02:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:02:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.113 1.097 1.065 2008-Aug-29 03:02:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.958 1.072 0.928 2008-Aug-29 03:02:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.925 1.077 0.959 2008-Aug-29 03:02:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.099 1.045 0.110 2008-Aug-29 03:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:02:19 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 03:02:19.302 (seconds: 10939.302)!} 2008-Aug-29 03:02:19 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 03:02:19.302 (seconds: 10939.302)! 2008-Aug-29 03:02:20 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 10938.0 to 10939.0! 2008-Aug-29 03:02:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:02:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 03:02:20 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2008-Aug-29 03:02:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 03:02:20 LOG5 end_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2008-Aug-29 03:02:20 LOG1 fixed_driftmap: New position: year = 2008.6629065581667 RA = 01:06:17.3 RA/Dec = 01:06:45.9 +03:49:17.9 2008-Aug-29 03:02:20 NOTE fixed_driftmap: Correcting ZA to 14:31:55.8 ... 2008-Aug-29 03:02:20 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5321718180 -CF 2008-Aug-29 03:02:20 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 03:02:20 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 03:02:20 LOG5 begin_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2008-Aug-29 03:02:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 03:02:20 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 03:02:20 LOG5 begin_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2008-Aug-29 03:02:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 03:02:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 03:02:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:02:20 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 03:02:20 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-Aug-29 03:02:20 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5321718180 -CF 2008-Aug-29 03:02:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:02:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 03:02:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:02:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:02:20 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 03:02:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 03:02:20 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2008-Aug-29 03:02:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 03:02:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 03:02:20 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 03:02:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 03:02:20 LOG5 begin_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Aug-29 03:02:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:02:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 03:02:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 03:02:21 LOG5 end_task: Level: (4) ID = <10195> Status = 0 0 0 0 ok 2008-Aug-29 03:02:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 03:02:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 03:02:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 03:02:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 03:02:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 03:02:21 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Aug-29 03:02:21 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 03:02:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 03:02:21 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Aug-29 03:02:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 03:02:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 03:02:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 03:02:21 LOG5 end_task: Level: (3) ID = <10193> Status = 0 0 0 0 ok 2008-Aug-29 03:02:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 03:02:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 03:02:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 03:02:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 03:02:21 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Aug-29 03:02:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 03:02:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 03:02:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 03:02:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 03:02:21 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Aug-29 03:02:21 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 03:02:21 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 03:02:21 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 03:02:21 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Aug-29 03:02:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 03:02:21 INFO2 take_data: Starting WAPP scan: 824200030 2008-Aug-29 03:02:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 03:02:21 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 03:02:21 LOG5 begin_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2008-Aug-29 03:02:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:02:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25342.00 2008-Aug-29 03:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:02:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:02:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:02:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 03:02:23 LOG5 end_task: Level: (4) ID = <10199> Status = 0 0 0 0 ok 2008-Aug-29 03:02:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 03:02:23 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2008-Aug-29 03:02:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 03:02:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 03:02:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 03:02:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 03:02:23 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Aug-29 03:02:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 03:02:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 03:02:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 03:02:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 03:02:24 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2008-Aug-29 03:02:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 03:02:24 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 03:02:24 LOG5 finish_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2008-Aug-29 03:02:24 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 03:02:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 03:02:24 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 03:02:24 LOG5 end_task: Level: (2) ID = <10192> Status = 0 0 0 0 ok 2008-Aug-29 03:02:24 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2008-Aug-29 03:02:24 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2008-Aug-29 03:02:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 03:02:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 03:02:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 03:02:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 03:02:24 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 03:02:24 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 03:02:24 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 03:02:24 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 03:02:24 LOG5 begin_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2008-Aug-29 03:02:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 03:02:24 INFO2 take_data: Starting WAPP scan: 824200031 2008-Aug-29 03:02:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 03:02:24 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 03:02:24 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Aug-29 03:02:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 03:02:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.555 (still bad) 2008-Aug-29 03:02:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25345.00 2008-Aug-29 03:02:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0015.fits 2008-Aug-29 03:02:24 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0015.fits} 2008-Aug-29 03:02:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:02:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:02:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:02:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:02:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:02:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:02:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:02:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:02:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.450 (still bad) 2008-Aug-29 03:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:03:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:03:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.113 1.098 1.067 2008-Aug-29 03:03:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.958 1.076 0.931 2008-Aug-29 03:03:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.925 1.077 0.961 2008-Aug-29 03:03:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.099 1.045 0.110 2008-Aug-29 03:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:04:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:04:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.114 1.102 1.071 2008-Aug-29 03:04:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.959 1.073 0.930 2008-Aug-29 03:04:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.928 1.085 0.969 2008-Aug-29 03:04:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.956 0.099 1.047 0.110 2008-Aug-29 03:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-29 03:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Aug-29 03:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Aug-29 03:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.158 (still bad) 2008-Aug-29 03:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.168 (still bad) 2008-Aug-29 03:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.172 (still bad) 2008-Aug-29 03:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.174 (still bad) 2008-Aug-29 03:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.166 (still bad) 2008-Aug-29 03:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.156 (still bad) 2008-Aug-29 03:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Aug-29 03:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-29 03:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-29 03:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Aug-29 03:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Aug-29 03:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-29 03:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:05:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:05:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.111 1.100 1.069 2008-Aug-29 03:05:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.959 1.077 0.931 2008-Aug-29 03:05:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.926 1.075 0.960 2008-Aug-29 03:05:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.099 1.048 0.110 2008-Aug-29 03:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:06:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:06:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.113 1.098 1.070 2008-Aug-29 03:06:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.959 1.076 0.932 2008-Aug-29 03:06:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.125 0.928 1.080 0.963 2008-Aug-29 03:06:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.958 0.099 1.048 0.110 2008-Aug-29 03:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-29 03:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:07:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:07:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.114 1.099 1.070 2008-Aug-29 03:07:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.959 1.076 0.931 2008-Aug-29 03:07:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.125 0.927 1.078 0.962 2008-Aug-29 03:07:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.099 1.046 0.110 2008-Aug-29 03:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:08:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:08:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.114 1.100 1.071 2008-Aug-29 03:08:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.960 1.073 0.930 2008-Aug-29 03:08:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.933 1.078 0.962 2008-Aug-29 03:08:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.956 0.099 1.048 0.110 2008-Aug-29 03:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:09:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:09:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 1.121 1.103 1.069 2008-Aug-29 03:09:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.959 1.075 0.932 2008-Aug-29 03:09:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.125 0.928 1.080 0.962 2008-Aug-29 03:09:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.958 0.099 1.049 0.110 2008-Aug-29 03:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:10:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:10:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.115 1.101 1.071 2008-Aug-29 03:10:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.958 1.075 0.931 2008-Aug-29 03:10:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.926 1.078 0.960 2008-Aug-29 03:10:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.956 0.099 1.047 0.110 2008-Aug-29 03:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:11:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:11:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.115 1.102 1.071 2008-Aug-29 03:11:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.956 1.072 0.929 2008-Aug-29 03:11:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.922 1.078 0.957 2008-Aug-29 03:11:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.099 1.047 0.110 2008-Aug-29 03:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 03:12:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:12:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.113 1.102 1.071 2008-Aug-29 03:12:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.956 1.073 0.930 2008-Aug-29 03:12:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 0.918 1.078 0.955 2008-Aug-29 03:12:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.099 1.043 0.110 2008-Aug-29 03:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:12:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:12:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 03:12:25 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2008-Aug-29 03:12:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 03:12:25 LOG5 end_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2008-Aug-29 03:12:25 LOG1 fixed_driftmap: New position: year = 2008.6629257294596 RA = 01:16:24.0 RA/Dec = 01:16:52.6 +03:49:15.7 2008-Aug-29 03:12:25 NOTE fixed_driftmap: Correcting ZA to 14:31:58.0 ... 2008-Aug-29 03:12:25 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5327709960 -CF 2008-Aug-29 03:12:25 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 03:12:25 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 03:12:25 LOG5 begin_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2008-Aug-29 03:12:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 03:12:25 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 03:12:25 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Aug-29 03:12:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 03:12:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 03:12:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:12:25 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 03:12:25 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Aug-29 03:12:25 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5327709960 -CF 2008-Aug-29 03:12:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:12:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 03:12:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:12:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:12:25 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 03:12:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 03:12:26 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2008-Aug-29 03:12:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 03:12:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 03:12:26 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 03:12:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 03:12:26 LOG5 begin_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2008-Aug-29 03:12:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:12:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 03:12:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 03:12:26 LOG5 end_task: Level: (4) ID = <10206> Status = 0 0 0 0 ok 2008-Aug-29 03:12:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 03:12:26 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 03:12:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 03:12:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 03:12:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 03:12:26 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Aug-29 03:12:26 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 03:12:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 03:12:26 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Aug-29 03:12:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 03:12:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 03:12:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 03:12:26 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2008-Aug-29 03:12:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 03:12:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 03:12:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 03:12:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 03:12:26 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-Aug-29 03:12:26 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 03:12:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 03:12:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 03:12:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 03:12:26 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-Aug-29 03:12:26 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 03:12:26 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 03:12:26 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 03:12:26 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Aug-29 03:12:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 03:12:26 INFO2 take_data: Starting WAPP scan: 824200032 2008-Aug-29 03:12:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 03:12:26 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 03:12:26 LOG5 begin_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Aug-29 03:12:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:12:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25947.00 2008-Aug-29 03:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:12:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:12:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:12:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:12:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:12:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:12:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:12:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:12:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:12:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:12:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:12:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 03:12:28 LOG5 end_task: Level: (4) ID = <10210> Status = 0 0 0 0 ok 2008-Aug-29 03:12:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 03:12:28 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2008-Aug-29 03:12:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 03:12:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 03:12:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 03:12:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 03:12:28 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2008-Aug-29 03:12:28 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 03:12:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 03:12:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 03:12:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 03:12:28 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2008-Aug-29 03:12:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 03:12:28 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 03:12:28 LOG5 finish_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2008-Aug-29 03:12:28 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 03:12:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 03:12:28 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 03:12:28 LOG5 end_task: Level: (2) ID = <10203> Status = 0 0 0 0 ok 2008-Aug-29 03:12:28 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2008-Aug-29 03:12:28 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2008-Aug-29 03:12:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 03:12:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 03:12:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 03:12:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 03:12:29 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 03:12:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 03:12:29 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 03:12:29 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 03:12:29 LOG5 begin_task: Level: (2) ID = <10212> Status = 0 0 0 0 ok 2008-Aug-29 03:12:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 03:12:29 INFO2 take_data: Starting WAPP scan: 824200033 2008-Aug-29 03:12:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 03:12:29 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 03:12:29 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Aug-29 03:12:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 03:12:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:12:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25950.00 2008-Aug-29 03:12:29 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0016.fits 2008-Aug-29 03:12:29 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0016.fits} 2008-Aug-29 03:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.536 (still bad) 2008-Aug-29 03:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:12:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.448 (still bad) 2008-Aug-29 03:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 03:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-29 03:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:13:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:13:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.113 1.099 1.070 2008-Aug-29 03:13:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.956 1.075 0.930 2008-Aug-29 03:13:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.931 1.077 0.955 2008-Aug-29 03:13:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.952 0.099 1.044 0.110 2008-Aug-29 03:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 03:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 03:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 03:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:14:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:14:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.116 1.102 1.070 2008-Aug-29 03:14:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.958 1.076 0.933 2008-Aug-29 03:14:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.921 1.078 0.959 2008-Aug-29 03:14:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.953 0.099 1.045 0.110 2008-Aug-29 03:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:15:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:15:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 1.119 1.101 1.071 2008-Aug-29 03:15:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.958 1.074 0.931 2008-Aug-29 03:15:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.118 0.925 1.078 0.958 2008-Aug-29 03:15:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.099 1.047 0.110 2008-Aug-29 03:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-29 03:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-29 03:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:16:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:16:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.115 1.100 1.073 2008-Aug-29 03:16:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.958 1.075 0.931 2008-Aug-29 03:16:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.926 1.115 0.988 2008-Aug-29 03:16:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.956 0.099 1.048 0.110 2008-Aug-29 03:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.168 (still bad) 2008-Aug-29 03:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.234 (still bad) 2008-Aug-29 03:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.310 (still bad) 2008-Aug-29 03:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.375 (still bad) 2008-Aug-29 03:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.411 (still bad) 2008-Aug-29 03:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.409 (still bad) 2008-Aug-29 03:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.342 (still bad) 2008-Aug-29 03:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.272 (still bad) 2008-Aug-29 03:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.201 (still bad) 2008-Aug-29 03:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Aug-29 03:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Aug-29 03:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.178 (still bad) 2008-Aug-29 03:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.213 (still bad) 2008-Aug-29 03:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.239 (still bad) 2008-Aug-29 03:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.257 (still bad) 2008-Aug-29 03:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.254 (still bad) 2008-Aug-29 03:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.227 (still bad) 2008-Aug-29 03:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.195 (still bad) 2008-Aug-29 03:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.158 (still bad) 2008-Aug-29 03:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Aug-29 03:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.163 (still bad) 2008-Aug-29 03:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.181 (still bad) 2008-Aug-29 03:17:18 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 03:17:18.301 (seconds: 11838.301)!} 2008-Aug-29 03:17:18 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 03:17:18.301 (seconds: 11838.301)! 2008-Aug-29 03:17:19 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 11837.0 to 11838.0! 2008-Aug-29 03:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.187 (still bad) 2008-Aug-29 03:17:20 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (11837.0 - 11839.0)! 2008-Aug-29 03:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.179 (still bad) 2008-Aug-29 03:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.158 (still bad) 2008-Aug-29 03:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.152 (still bad) 2008-Aug-29 03:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.153 (still bad) 2008-Aug-29 03:17:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:17:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.122 1.148 1.101 1.073 2008-Aug-29 03:17:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.961 1.089 0.941 2008-Aug-29 03:17:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.926 1.080 0.960 2008-Aug-29 03:17:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.099 1.052 0.110 2008-Aug-29 03:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Aug-29 03:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Aug-29 03:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-29 03:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:18:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:18:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.119 1.100 1.069 2008-Aug-29 03:18:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 0.962 1.077 0.934 2008-Aug-29 03:18:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.931 1.080 0.962 2008-Aug-29 03:18:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.099 1.048 0.110 2008-Aug-29 03:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:19:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:19:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.117 1.101 1.071 2008-Aug-29 03:19:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.964 1.076 0.933 2008-Aug-29 03:19:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.125 0.929 1.079 0.963 2008-Aug-29 03:19:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.958 0.099 1.049 0.110 2008-Aug-29 03:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-29 03:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Aug-29 03:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.156 (still bad) 2008-Aug-29 03:20:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:20:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.140 1.164 1.100 1.071 2008-Aug-29 03:20:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.960 1.076 0.933 2008-Aug-29 03:20:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.929 1.081 0.962 2008-Aug-29 03:20:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.099 1.049 0.110 2008-Aug-29 03:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.171 (still bad) 2008-Aug-29 03:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.168 (still bad) 2008-Aug-29 03:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.162 (still bad) 2008-Aug-29 03:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Aug-29 03:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Aug-29 03:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:21:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:21:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.091 1.114 1.101 1.071 2008-Aug-29 03:21:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.961 1.078 0.933 2008-Aug-29 03:21:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.127 0.929 1.081 0.962 2008-Aug-29 03:21:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.958 0.099 1.049 0.110 2008-Aug-29 03:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:22:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:22:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 03:22:30 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2008-Aug-29 03:22:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 03:22:30 LOG5 end_task: Level: (2) ID = <10212> Status = 0 0 0 0 ok 2008-Aug-29 03:22:30 LOG1 fixed_driftmap: New position: year = 2008.6629449007528 RA = 01:26:30.7 RA/Dec = 01:26:59.2 +03:49:13.2 2008-Aug-29 03:22:30 NOTE fixed_driftmap: Correcting ZA to 14:32:00.5 ... 2008-Aug-29 03:22:30 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5334621923 -CF 2008-Aug-29 03:22:30 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 03:22:30 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 03:22:30 LOG5 begin_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2008-Aug-29 03:22:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 03:22:30 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 03:22:30 LOG5 begin_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Aug-29 03:22:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 03:22:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 03:22:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:22:30 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 03:22:30 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Aug-29 03:22:30 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5334621923 -CF 2008-Aug-29 03:22:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:22:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 03:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:22:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:22:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:22:30 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 03:22:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 03:22:30 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2008-Aug-29 03:22:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 03:22:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 03:22:30 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 03:22:30 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 03:22:30 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Aug-29 03:22:30 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:22:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 03:22:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 03:22:31 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2008-Aug-29 03:22:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 03:22:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 03:22:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 03:22:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 03:22:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 03:22:31 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2008-Aug-29 03:22:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 03:22:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 03:22:31 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2008-Aug-29 03:22:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 03:22:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 03:22:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 03:22:31 LOG5 end_task: Level: (3) ID = <10215> Status = 0 0 0 0 ok 2008-Aug-29 03:22:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 03:22:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 03:22:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 03:22:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 03:22:31 LOG5 begin_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2008-Aug-29 03:22:31 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 03:22:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 03:22:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 03:22:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 03:22:31 LOG5 end_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2008-Aug-29 03:22:31 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 03:22:31 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 03:22:31 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 03:22:31 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Aug-29 03:22:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 03:22:31 INFO2 take_data: Starting WAPP scan: 824200034 2008-Aug-29 03:22:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 03:22:31 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 03:22:31 LOG5 begin_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2008-Aug-29 03:22:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:22:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26552.00 2008-Aug-29 03:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:22:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.557 (still bad) 2008-Aug-29 03:22:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:22:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 03:22:33 LOG5 end_task: Level: (4) ID = <10221> Status = 0 0 0 0 ok 2008-Aug-29 03:22:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 03:22:33 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2008-Aug-29 03:22:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 03:22:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 03:22:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 03:22:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 03:22:33 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Aug-29 03:22:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 03:22:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 03:22:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 03:22:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 03:22:34 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2008-Aug-29 03:22:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 03:22:34 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 03:22:34 LOG5 finish_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2008-Aug-29 03:22:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 03:22:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 03:22:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 03:22:34 LOG5 end_task: Level: (2) ID = <10214> Status = 0 0 0 0 ok 2008-Aug-29 03:22:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2008-Aug-29 03:22:34 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2008-Aug-29 03:22:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 03:22:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 03:22:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 03:22:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 03:22:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 03:22:34 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 03:22:34 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 03:22:34 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 03:22:34 LOG5 begin_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2008-Aug-29 03:22:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 03:22:34 INFO2 take_data: Starting WAPP scan: 824200035 2008-Aug-29 03:22:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 03:22:34 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 03:22:34 LOG5 begin_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2008-Aug-29 03:22:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 03:22:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:22:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26555.00 2008-Aug-29 03:22:34 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0017.fits 2008-Aug-29 03:22:34 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0017.fits} 2008-Aug-29 03:22:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:22:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.500 1.499 1.471 1.435 2008-Aug-29 03:22:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.294 1.306 1.477 1.269 2008-Aug-29 03:22:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.557 1.292 1.491 1.276 2008-Aug-29 03:22:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.332 0.099 1.456 0.111 2008-Aug-29 03:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:22:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:23:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:23:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.114 1.101 1.071 2008-Aug-29 03:23:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.960 1.079 0.936 2008-Aug-29 03:23:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.929 1.078 0.963 2008-Aug-29 03:23:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.969 0.099 1.060 0.110 2008-Aug-29 03:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:24:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:24:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.092 1.114 1.103 1.072 2008-Aug-29 03:24:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.962 1.076 0.933 2008-Aug-29 03:24:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.125 0.929 1.079 0.964 2008-Aug-29 03:24:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.958 0.099 1.049 0.110 2008-Aug-29 03:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:24:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:25:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:25:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.117 1.101 1.071 2008-Aug-29 03:25:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.960 1.077 0.935 2008-Aug-29 03:25:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.127 0.929 1.080 0.962 2008-Aug-29 03:25:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.958 0.099 1.049 0.110 2008-Aug-29 03:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:26:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:26:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.116 1.104 1.075 2008-Aug-29 03:26:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.963 1.076 0.932 2008-Aug-29 03:26:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.930 1.080 0.964 2008-Aug-29 03:26:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.099 1.050 0.110 2008-Aug-29 03:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:27:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:27:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.115 1.104 1.073 2008-Aug-29 03:27:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.958 0.964 1.077 0.934 2008-Aug-29 03:27:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.130 0.934 1.083 0.964 2008-Aug-29 03:27:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.963 0.099 1.053 0.110 2008-Aug-29 03:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-29 03:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-29 03:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-29 03:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:28:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:28:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.117 1.104 1.074 2008-Aug-29 03:28:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.962 1.078 0.936 2008-Aug-29 03:28:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.127 0.929 1.081 0.964 2008-Aug-29 03:28:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.962 0.099 1.053 0.110 2008-Aug-29 03:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:28:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:29:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:29:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:29:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:29:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:29:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:29:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:29:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:29:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.118 1.104 1.071 2008-Aug-29 03:29:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.962 1.077 0.935 2008-Aug-29 03:29:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.125 0.929 1.079 0.963 2008-Aug-29 03:29:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.099 1.051 0.110 2008-Aug-29 03:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-29 03:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-29 03:30:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-29 03:30:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-29 03:30:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-29 03:30:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-29 03:30:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-29 03:30:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:30:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 1.121 1.104 1.073 2008-Aug-29 03:30:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.963 1.077 0.934 2008-Aug-29 03:30:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.130 0.933 1.081 0.965 2008-Aug-29 03:30:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.961 0.099 1.052 0.110 2008-Aug-29 03:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:31:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:31:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 1.117 1.103 1.074 2008-Aug-29 03:31:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.962 1.077 0.933 2008-Aug-29 03:31:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.929 1.081 0.962 2008-Aug-29 03:31:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.099 1.052 0.110 2008-Aug-29 03:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:32:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:32:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:32:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 03:32:35 LOG5 end_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2008-Aug-29 03:32:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 03:32:35 LOG5 end_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2008-Aug-29 03:32:35 LOG1 fixed_driftmap: New position: year = 2008.662964072046 RA = 01:36:37.3 RA/Dec = 01:37:05.9 +03:49:10.4 2008-Aug-29 03:32:35 NOTE fixed_driftmap: Correcting ZA to 14:32:03.3 ... 2008-Aug-29 03:32:35 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5342440579 -CF 2008-Aug-29 03:32:35 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 03:32:35 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 03:32:35 LOG5 begin_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2008-Aug-29 03:32:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 03:32:35 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 03:32:35 LOG5 begin_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Aug-29 03:32:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 03:32:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 03:32:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:32:35 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 03:32:35 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Aug-29 03:32:35 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5342440579 -CF 2008-Aug-29 03:32:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:32:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 03:32:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:32:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:32:35 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 03:32:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 03:32:36 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2008-Aug-29 03:32:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 03:32:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 03:32:36 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 03:32:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 03:32:36 LOG5 begin_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Aug-29 03:32:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:32:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 03:32:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 03:32:36 LOG5 end_task: Level: (4) ID = <10228> Status = 0 0 0 0 ok 2008-Aug-29 03:32:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 03:32:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 03:32:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 03:32:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 03:32:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 03:32:36 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2008-Aug-29 03:32:36 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 03:32:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 03:32:36 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2008-Aug-29 03:32:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 03:32:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 03:32:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 03:32:36 LOG5 end_task: Level: (3) ID = <10226> Status = 0 0 0 0 ok 2008-Aug-29 03:32:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 03:32:36 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 03:32:36 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 03:32:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 03:32:36 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2008-Aug-29 03:32:36 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 03:32:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 03:32:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 03:32:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 03:32:36 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2008-Aug-29 03:32:36 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 03:32:36 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 03:32:36 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 03:32:36 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Aug-29 03:32:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 03:32:36 INFO2 take_data: Starting WAPP scan: 824200036 2008-Aug-29 03:32:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 03:32:36 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 03:32:36 LOG5 begin_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2008-Aug-29 03:32:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:32:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27157.00 2008-Aug-29 03:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:32:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:32:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:32:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 03:32:38 LOG5 end_task: Level: (4) ID = <10232> Status = 0 0 0 0 ok 2008-Aug-29 03:32:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 03:32:38 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2008-Aug-29 03:32:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 03:32:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 03:32:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 03:32:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 03:32:38 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Aug-29 03:32:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 03:32:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 03:32:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 03:32:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 03:32:38 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2008-Aug-29 03:32:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 03:32:38 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 03:32:38 LOG5 finish_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2008-Aug-29 03:32:38 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 03:32:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 03:32:38 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 03:32:38 LOG5 end_task: Level: (2) ID = <10225> Status = 0 0 0 0 ok 2008-Aug-29 03:32:38 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2008-Aug-29 03:32:38 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2008-Aug-29 03:32:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 03:32:38 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 03:32:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 03:32:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 03:32:39 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 03:32:39 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 03:32:39 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 03:32:39 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 03:32:39 LOG5 begin_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2008-Aug-29 03:32:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 03:32:39 INFO2 take_data: Starting WAPP scan: 824200037 2008-Aug-29 03:32:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 03:32:39 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 03:32:39 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Aug-29 03:32:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 03:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.549 (still bad) 2008-Aug-29 03:32:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:32:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27160.00 2008-Aug-29 03:32:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0018.fits 2008-Aug-29 03:32:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0018.fits} 2008-Aug-29 03:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:32:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.549 (still bad) 2008-Aug-29 03:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:32:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:32:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.118 1.107 1.077 2008-Aug-29 03:32:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.959 1.077 0.933 2008-Aug-29 03:32:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.118 0.924 1.079 0.960 2008-Aug-29 03:32:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.099 1.050 0.110 2008-Aug-29 03:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:33:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:33:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.096 1.118 1.105 1.074 2008-Aug-29 03:33:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.958 1.075 0.932 2008-Aug-29 03:33:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.921 1.078 0.958 2008-Aug-29 03:33:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.956 0.099 1.048 0.110 2008-Aug-29 03:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-29 03:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:34:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:34:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.116 1.102 1.076 2008-Aug-29 03:34:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.953 0.958 1.073 0.932 2008-Aug-29 03:34:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.113 0.921 1.081 0.959 2008-Aug-29 03:34:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.099 1.047 0.109 2008-Aug-29 03:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-29 03:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-29 03:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-29 03:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-29 03:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-29 03:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:35:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-29 03:35:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.116 1.102 1.073 2008-Aug-29 03:35:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.963 0.970 1.075 0.933 2008-Aug-29 03:35:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.118 0.922 1.080 0.960 2008-Aug-29 03:35:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.098 1.049 0.109 2008-Aug-29 03:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-29 03:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-29 03:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:36:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:36:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.094 1.120 1.102 1.073 2008-Aug-29 03:36:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.962 1.076 0.934 2008-Aug-29 03:36:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.924 1.079 0.960 2008-Aug-29 03:36:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.958 0.099 1.049 0.110 2008-Aug-29 03:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-29 03:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:37:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:37:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.115 1.103 1.074 2008-Aug-29 03:37:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.963 1.077 0.935 2008-Aug-29 03:37:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.930 1.079 0.962 2008-Aug-29 03:37:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.099 1.051 0.110 2008-Aug-29 03:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-29 03:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:38:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:38:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.120 1.103 1.075 2008-Aug-29 03:38:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.952 0.962 1.078 0.937 2008-Aug-29 03:38:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.127 0.931 1.081 0.964 2008-Aug-29 03:38:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.099 1.050 0.110 2008-Aug-29 03:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:39:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:39:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.119 1.107 1.079 2008-Aug-29 03:39:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.964 1.078 0.935 2008-Aug-29 03:39:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.931 1.080 0.965 2008-Aug-29 03:39:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.962 0.099 1.051 0.110 2008-Aug-29 03:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-29 03:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:40:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:40:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.116 1.103 1.076 2008-Aug-29 03:40:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.964 1.077 0.936 2008-Aug-29 03:40:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.125 0.929 1.084 0.965 2008-Aug-29 03:40:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.962 0.099 1.051 0.110 2008-Aug-29 03:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-29 03:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:42:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:42:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.095 1.119 1.103 1.077 2008-Aug-29 03:42:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.964 1.083 0.940 2008-Aug-29 03:42:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.931 1.079 0.965 2008-Aug-29 03:42:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.962 0.099 1.053 0.110 2008-Aug-29 03:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-29 03:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-29 03:42:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:42:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 03:42:40 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2008-Aug-29 03:42:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 03:42:40 LOG5 end_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2008-Aug-29 03:42:40 LOG1 fixed_driftmap: New position: year = 2008.6629832433391 RA = 01:46:44.0 RA/Dec = 01:47:12.5 +03:49:07.3 2008-Aug-29 03:42:40 NOTE fixed_driftmap: Correcting ZA to 14:32:06.4 ... 2008-Aug-29 03:42:40 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.5351150761 -CF 2008-Aug-29 03:42:40 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-29 03:42:40 START begin_task: Starting task 'WAPP calibration' 2008-Aug-29 03:42:40 LOG5 begin_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2008-Aug-29 03:42:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-29 03:42:40 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 03:42:40 LOG5 begin_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2008-Aug-29 03:42:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 03:42:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 03:42:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:42:40 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 03:42:40 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2008-Aug-29 03:42:40 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.5351150761 -CF 2008-Aug-29 03:42:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:42:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 03:42:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:42:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:42:40 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 03:42:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 03:42:40 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2008-Aug-29 03:42:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 03:42:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 03:42:40 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 03:42:40 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 03:42:40 LOG5 begin_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2008-Aug-29 03:42:40 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:42:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 03:42:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 03:42:41 LOG5 end_task: Level: (4) ID = <10239> Status = 0 0 0 0 ok 2008-Aug-29 03:42:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 03:42:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 03:42:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 03:42:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 03:42:41 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 03:42:41 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Aug-29 03:42:41 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 03:42:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 03:42:41 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Aug-29 03:42:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 03:42:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 03:42:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 03:42:41 LOG5 end_task: Level: (3) ID = <10237> Status = 0 0 0 0 ok 2008-Aug-29 03:42:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-29 03:42:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 03:42:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 03:42:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 03:42:41 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Aug-29 03:42:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 03:42:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 03:42:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 03:42:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 03:42:41 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Aug-29 03:42:41 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-29 03:42:41 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-29 03:42:41 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 03:42:41 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2008-Aug-29 03:42:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 03:42:41 INFO2 take_data: Starting WAPP scan: 824200038 2008-Aug-29 03:42:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-29 03:42:41 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 03:42:41 LOG5 begin_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Aug-29 03:42:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:42:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27762.00 2008-Aug-29 03:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:42:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:42:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:42:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-29 03:42:43 LOG5 end_task: Level: (4) ID = <10243> Status = 0 0 0 0 ok 2008-Aug-29 03:42:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-29 03:42:43 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2008-Aug-29 03:42:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 03:42:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 03:42:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 03:42:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 03:42:43 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Aug-29 03:42:43 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 03:42:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 03:42:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 03:42:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 03:42:43 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2008-Aug-29 03:42:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 03:42:43 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-29 03:42:43 LOG5 finish_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2008-Aug-29 03:42:43 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-29 03:42:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 03:42:43 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-29 03:42:43 LOG5 end_task: Level: (2) ID = <10236> Status = 0 0 0 0 ok 2008-Aug-29 03:42:43 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 20 of 99 2008-Aug-29 03:42:43 LOG4 send_obs_status: To obs_status: <1> LOOP 20 2008-Aug-29 03:42:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 03:42:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 03:42:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 03:42:43 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 03:42:43 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-29 03:42:44 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-29 03:42:44 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-29 03:42:44 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-29 03:42:44 LOG5 begin_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2008-Aug-29 03:42:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-29 03:42:44 INFO2 take_data: Starting WAPP scan: 824200039 2008-Aug-29 03:42:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-29 03:42:44 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-29 03:42:44 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2008-Aug-29 03:42:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 03:42:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:42:44 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0019.fits 2008-Aug-29 03:42:44 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0019.fits} 2008-Aug-29 03:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.559 (still bad) 2008-Aug-29 03:42:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27765.00 2008-Aug-29 03:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:42:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.502 (still bad) 2008-Aug-29 03:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:42:50 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Aug-29 03:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-29 03:42:50 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Aug-29 03:42:50 WARNING abort_task: WARNING abort requested! 2008-Aug-29 03:42:50 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2008-Aug-29 03:42:50 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2008-Aug-29 03:42:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2008-Aug-29 03:42:50 LOG5 end_task: Level: (3) ID = <10246> Status = 1 0 0 0 abort 2008-Aug-29 03:42:50 START begin_task: Starting task 'stopping the WAPPs' 2008-Aug-29 03:42:50 LOG5 begin_task: Level: (3) ID = <10247> Status = 1 0 0 0 abort 2008-Aug-29 03:42:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-Aug-29 03:42:50 INFO1 stop_wapp: Stopping the WAPPs 2008-Aug-29 03:42:50 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-Aug-29 03:42:50 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-Aug-29 03:42:50 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-Aug-29 03:42:50 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-Aug-29 03:42:51 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-Aug-29 03:42:51 LOG5 begin_task: Level: (4) ID = <10248> Status = 1 0 0 0 abort 2008-Aug-29 03:42:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-Aug-29 03:42:52 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2008-Aug-29 03:42:52 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2008-Aug-29 03:42:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:42:52 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2008-Aug-29 03:42:52 LOG5 end_task: Level: (4) ID = <10248> Status = 1 0 0 0 abort 2008-Aug-29 03:42:52 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2008-Aug-29 03:42:52 LOG5 end_task: Level: (3) ID = <10247> Status = 1 0 0 0 abort 2008-Aug-29 03:42:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2008-Aug-29 03:42:52 LOG5 end_task: Level: (2) ID = <10245> Status = 1 0 0 0 abort 2008-Aug-29 03:42:52 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Aug-29 03:42:52 LOG5 finish_task: Level: (1) ID = <10021> Status = 1 0 0 0 abort 2008-Aug-29 03:42:52 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2008-Aug-29 03:42:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Aug-29 03:42:52 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2008-Aug-29 03:42:52 LOG5 end_task: Level: (1) ID = <10021> Status = 1 0 0 0 abort 2008-Aug-29 03:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-29 03:42:55 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Aug-29 03:42:55 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Aug-29 03:42:55 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Aug-29 03:42:55 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Aug-29 03:42:55 LOG5 begin_task: Level: (1) ID = <10249> Status = 0 0 0 0 ok 2008-Aug-29 03:42:55 NOTE restart_wapp: Restarting all WAPPs 2008-Aug-29 03:42:55 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Aug-29 03:42:55 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Aug-29 03:42:55 LOG5 end_task: Level: (1) ID = <10249> Status = 0 0 0 0 ok 2008-Aug-29 03:42:55 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Aug-29 03:42:56 LOG3 exec_msg: Closing socket 2008-Aug-29 03:42:56 LOG3 exec_msg: Closing socket 2008-Aug-29 03:42:56 LOG3 exec_msg: Closing socket 2008-Aug-29 03:42:56 LOG3 exec_msg: Closing socket 2008-Aug-29 03:42:58 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Aug-29 03:42:59 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Aug-29 03:42:59 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Aug-29 03:42:59 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Aug-29 03:43:08 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Aug-29 03:43:17 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos ' to executive ... 2008-Aug-29 03:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 6 {LOAD togs.conf} 2008-Aug-29 03:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 7 {TRACKCURPOS} 2008-Aug-29 03:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 8 {ALFAANGLE 19} 2008-Aug-29 03:43:17 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Aug-29 03:43:17 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Aug-29 03:43:17 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos 1 1 4 2008-Aug-29 03:43:17 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos 1 1 4' 2008-Aug-29 03:43:17 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos'' 2008-Aug-29 03:43:17 LOG5 begin_task: Level: (1) ID = <10250> Status = 0 0 0 0 ok 2008-Aug-29 03:43:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos' ...} 2008-Aug-29 03:43:17 NOTE run_command_file: Starting execution of command file 'command_galfacurpos' from line 1 2008-Aug-29 03:43:17 COMMAND run_command_line: EXECUTING command 6: 'LOAD togs.conf' 2008-Aug-29 03:43:17 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-29 03:43:18 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Aug-29 03:43:18 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Aug-29 03:43:18 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-29 03:43:19 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-29 03:43:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-29 03:43:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Aug-29 03:43:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Aug-29 03:43:20 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Aug-29 03:43:20 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-29 03:43:20 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Aug-29 03:43:20 LOG5 begin_task: Level: (2) ID = <10251> Status = 0 0 0 0 ok 2008-Aug-29 03:43:20 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Aug-29 03:43:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Aug-29 03:43:20 LOG1 config_iflo: Receiver ALFA already selected 2008-Aug-29 03:43:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 03:43:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 03:43:20 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 03:43:20 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2008-Aug-29 03:43:20 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 03:43:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 03:43:20 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2008-Aug-29 03:43:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 03:43:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 03:43:20 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Aug-29 03:43:20 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Aug-29 03:43:20 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Aug-29 03:43:20 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Aug-29 03:43:20 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Aug-29 03:43:20 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Aug-29 03:43:20 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Aug-29 03:43:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-29 03:43:20 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Aug-29 03:43:20 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Aug-29 03:43:20 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Aug-29 03:43:20 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Aug-29 03:43:20 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Aug-29 03:43:20 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Aug-29 03:43:20 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Aug-29 03:43:20 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Aug-29 03:43:20 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Aug-29 03:43:20 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Aug-29 03:43:20 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Aug-29 03:43:20 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Aug-29 03:43:20 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Aug-29 03:43:20 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Aug-29 03:43:20 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Aug-29 03:43:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:43:20 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Aug-29 03:43:20 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Aug-29 03:43:20 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Aug-29 03:43:20 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Aug-29 03:43:20 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Aug-29 03:43:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Aug-29 03:43:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:43:20 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Aug-29 03:43:20 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Aug-29 03:43:20 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-29 03:43:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Aug-29 03:43:20 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:43:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:43:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:43:20 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:43:20 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Aug-29 03:43:20 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Aug-29 03:43:20 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2008-Aug-29 03:43:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Aug-29 03:43:20 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Aug-29 03:43:20 LOG5 finish_task: Level: (2) ID = <10251> Status = 0 0 0 0 ok 2008-Aug-29 03:43:20 DONE finish_task: DONE finished configuration: IF/LO path 2008-Aug-29 03:43:20 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-29 03:43:20 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Aug-29 03:43:20 LOG5 end_task: Level: (2) ID = <10251> Status = 0 0 0 0 ok 2008-Aug-29 03:43:20 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Aug-29 03:43:20 LOG5 begin_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2008-Aug-29 03:43:20 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Aug-29 03:43:20 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Aug-29 03:43:20 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Aug-29 03:43:20 START begin_task: Starting task 'selecting calibration port' 2008-Aug-29 03:43:20 LOG5 begin_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2008-Aug-29 03:43:21 LOG3 vw_send: To DATATAKING: calport 3 2008-Aug-29 03:43:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Aug-29 03:43:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:43:21 START begin_task: Starting task 'waiting on calport' 2008-Aug-29 03:43:21 LOG5 begin_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2008-Aug-29 03:43:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:43:21 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Aug-29 03:43:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:43:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:43:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 03:43:21 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Aug-29 03:43:21 LOG5 end_task: Level: (4) ID = <10256> Status = 0 0 0 0 ok 2008-Aug-29 03:43:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Aug-29 03:43:21 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Aug-29 03:43:21 LOG5 end_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2008-Aug-29 03:43:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 03:43:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 03:43:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 03:43:21 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Aug-29 03:43:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:43:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 03:43:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 03:43:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 03:43:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 03:43:21 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2008-Aug-29 03:43:21 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Aug-29 03:43:21 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Aug-29 03:43:21 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Aug-29 03:43:21 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Aug-29 03:43:21 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Aug-29 03:43:21 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Aug-29 03:43:21 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Aug-29 03:43:21 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Aug-29 03:43:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 03:43:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 03:43:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 03:43:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 03:43:21 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Aug-29 03:43:21 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Aug-29 03:43:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 03:43:21 LOG5 begin_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2008-Aug-29 03:43:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Aug-29 03:43:21 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 03:43:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Aug-29 03:43:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 03:43:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 03:43:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 03:43:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 03:43:21 LOG5 end_task: Level: (3) ID = <10258> Status = 0 0 0 0 ok 2008-Aug-29 03:43:21 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Aug-29 03:43:21 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Aug-29 03:43:21 LOG5 finish_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2008-Aug-29 03:43:21 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Aug-29 03:43:21 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-29 03:43:21 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Aug-29 03:43:21 LOG5 end_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2008-Aug-29 03:43:22 COMMAND run_command_line: EXECUTING command 7: 'TRACKCURPOS' 2008-Aug-29 03:43:22 BEGIN begin_task: Starting task 'tracking current position' 2008-Aug-29 03:43:22 LOG5 begin_task: Level: (2) ID = <10259> Status = 0 0 0 0 ok 2008-Aug-29 03:43:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2008-Aug-29 03:43:22 INFO1 track_current_pos: Starting to track the current commanded position RA = 01:47:25.1 and Dec = +03:46:19.0 2008-Aug-29 03:43:22 LOG3 track_source: Calling 'track_source Cur-pos 014725.1 034619.0 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Aug-29 03:43:22 START begin_task: Starting task 'sending tracking commands' 2008-Aug-29 03:43:22 LOG5 begin_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2008-Aug-29 03:43:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2008-Aug-29 03:43:22 INFO1 track_source: Starting to track Cur-pos 2008-Aug-29 03:43:22 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2008-Aug-29 03:43:22 LOG3 vw_send: To DATATAKING: set ra 014725.1 2008-Aug-29 03:43:22 LOG3 vw_send: To DATATAKING: set dec 034619.0 2008-Aug-29 03:43:22 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-29 03:43:22 LOG3 vw_send: To DATATAKING: pnt tr 014725.1 034619.0 -CJ 2008-Aug-29 03:43:22 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Aug-29 03:43:22 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-29 03:43:22 LOG5 finish_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2008-Aug-29 03:43:22 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-29 03:43:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 03:43:22 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-29 03:43:22 LOG5 end_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2008-Aug-29 03:43:22 START begin_task: Starting task 'waiting on telescope' 2008-Aug-29 03:43:22 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Aug-29 03:43:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-29 03:43:22 LOG3 waittrk: Start waittrk 5 2008-Aug-29 03:43:22 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-29 03:43:22 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Aug-29 03:43:22 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Aug-29 03:43:22 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2008-Aug-29 03:43:22 LOG4 got_cormsg: From DATATAKING: set ra 014725.1 2008-Aug-29 03:43:22 LOG4 got_cormsg: From DATATAKING: set dec 034619.0 2008-Aug-29 03:43:22 LOG4 got_cormsg: From DATATAKING: vw% 014725.1 2008-Aug-29 03:43:22 LOG4 got_cormsg: From DATATAKING: vw% 034619.0 2008-Aug-29 03:43:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:43:22 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-29 03:43:22 LOG4 got_cormsg: From DATATAKING: pnt tr 014725.1 034619.0 -CJ 2008-Aug-29 03:43:22 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Aug-29 03:43:22 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-29 03:43:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:43:27 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-29 03:43:27 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Aug-29 03:43:27 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-29 03:43:27 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Aug-29 03:43:33 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-29 03:43:33 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2008-Aug-29 03:43:33 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-29 03:43:33 INFO2 waittrk: Now tracking Cur-pos 2008-Aug-29 03:43:33 LOG4 waittrk: Current telescope position: Az = 359.84 ZA = 14.51 2008-Aug-29 03:43:33 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-29 03:43:33 LOG5 finish_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Aug-29 03:43:33 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-29 03:43:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 03:43:33 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-29 03:43:33 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Aug-29 03:43:33 STOP finish_task: Finishing task 'tracking current position' 2008-Aug-29 03:43:33 LOG5 finish_task: Level: (2) ID = <10259> Status = 0 0 0 0 ok 2008-Aug-29 03:43:33 DONE finish_task: DONE finished tracking: current position 2008-Aug-29 03:43:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-29 03:43:33 END end_task: Finishing task 'tracking current position' with status 'OK' 2008-Aug-29 03:43:33 LOG5 end_task: Level: (2) ID = <10259> Status = 0 0 0 0 ok 2008-Aug-29 03:43:33 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-Aug-29 03:43:33 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Aug-29 03:43:33 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Aug-29 03:43:33 LOG5 begin_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2008-Aug-29 03:43:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Aug-29 03:43:34 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Aug-29 03:43:34 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Aug-29 03:43:34 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Aug-29 03:43:34 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Aug-29 03:43:34 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Aug-29 03:43:34 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Aug-29 03:43:34 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Aug-29 03:43:34 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Aug-29 03:43:34 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Aug-29 03:43:34 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-29 03:43:34 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Aug-29 03:43:34 LOG5 finish_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2008-Aug-29 03:43:34 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Aug-29 03:43:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-29 03:43:34 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Aug-29 03:43:34 LOG5 end_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2008-Aug-29 03:43:35 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Aug-29 03:43:35 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Aug-29 03:43:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-29 03:43:35 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Aug-29 03:43:35 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Aug-29 03:43:35 LOG5 begin_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2008-Aug-29 03:43:35 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2008-Aug-29 03:43:35 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Aug-29 03:43:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Aug-29 03:43:35 START begin_task: Starting task 'selecting calibration type' 2008-Aug-29 03:43:35 LOG5 begin_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2008-Aug-29 03:43:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-29 03:43:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-29 03:43:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:43:35 START begin_task: Starting task 'waiting on setcal' 2008-Aug-29 03:43:35 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Aug-29 03:43:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-29 03:43:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:43:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:43:35 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 03:43:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-29 03:43:35 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Aug-29 03:43:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-29 03:43:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 03:43:35 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-29 03:43:35 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 03:43:35 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2008-Aug-29 03:43:35 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:43:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 03:43:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 03:43:35 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2008-Aug-29 03:43:35 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 03:43:35 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-29 03:43:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-29 03:43:35 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-29 03:43:35 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-29 03:43:35 LOG5 begin_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2008-Aug-29 03:43:35 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-29 03:43:35 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-29 03:43:35 LOG5 end_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2008-Aug-29 03:43:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-29 03:43:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-29 03:43:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-29 03:43:36 LOG5 end_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2008-Aug-29 03:43:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Ann Martin 2008-Aug-29 03:43:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Ann Martin 2008-Aug-29 03:43:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Ann Martin 2008-Aug-29 03:43:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Ann Martin 2008-Aug-29 03:43:36 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Aug-29 03:43:36 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Aug-29 03:43:36 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 03:43:36 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 03:43:36 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 03:43:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 03:43:36 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-Aug-29 03:43:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Ann Martin' 2008-Aug-29 03:43:36 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 03:43:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 03:43:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 03:43:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 03:43:36 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-Aug-29 03:43:36 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Aug-29 03:43:36 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-29 03:43:36 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Aug-29 03:43:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-29 03:43:36 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-29 03:43:36 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-29 03:43:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-29 03:43:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:43:36 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-29 03:43:36 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2008-Aug-29 03:43:36 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-29 03:43:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-29 03:43:36 NOTE WAPPDATA-new_file: New FITS file: wapp.20080829.a2010.0020.fits 2008-Aug-29 03:43:36 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080829.a2010.0020.fits} 2008-Aug-29 03:43:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:43:39 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-29 03:43:39 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-29 03:43:39 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2008-Aug-29 03:43:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-29 03:43:39 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-29 03:43:39 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2008-Aug-29 03:43:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-29 03:43:39 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-29 03:43:39 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-29 03:43:39 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-29 03:43:39 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-29 03:43:39 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-29 03:43:39 LOG5 begin_task: Level: (5) ID = <10275> Status = 0 0 0 0 ok 2008-Aug-29 03:43:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Aug-29 03:43:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:43:40 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2008-Aug-29 03:43:40 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2008-Aug-29 03:43:40 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 3 3 dB --- beam 5: 5 5 dB 2008-Aug-29 03:43:40 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2008-Aug-29 03:43:40 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-29 03:43:40 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-29 03:43:40 LOG5 end_task: Level: (5) ID = <10275> Status = 0 0 0 0 ok 2008-Aug-29 03:43:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.094 0.890 ALFA beam 1: 1.108 1.078 2008-Aug-29 03:43:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.958 0.965 ALFA beam 3: 1.061 0.918 2008-Aug-29 03:43:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.881 0.912 ALFA beam 5: 1.081 0.964 2008-Aug-29 03:43:40 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.942 0.097 ALFA beam 7: 1.040 0.108 2008-Aug-29 03:43:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-29 03:43:40 LOG5 finish_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2008-Aug-29 03:43:40 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Aug-29 03:43:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 03:43:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-29 03:43:40 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2008-Aug-29 03:43:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-29 03:43:40 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-29 03:43:40 LOG5 finish_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Aug-29 03:43:40 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-29 03:43:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-29 03:43:40 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-29 03:43:40 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Aug-29 03:43:40 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Aug-29 03:43:40 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Aug-29 03:43:40 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Aug-29 03:43:40 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:43:40 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:43:40 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:43:40 LOG2 antvel: Parameters to Doppler: Topocentric 27820 2008 242 0.0 2008-Aug-29 03:43:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:43:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Aug-29 03:43:40 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Aug-29 03:43:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:43:40 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:43:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Aug-29 03:43:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:43:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-29 03:43:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:43:40 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Aug-29 03:43:40 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.803303 2008.6629851446244 18.999933 2008-Aug-29 03:43:40 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555741 3.771944444444447 2008-Aug-29 03:43:40 LOG4 log_alfabeam: ALFABEAM 1 1.789183806920103 3.876749030438543 2008-Aug-29 03:43:40 LOG4 log_alfabeam: ALFABEAM 2 1.784556534717339 3.807354664773951 2008-Aug-29 03:43:40 LOG4 log_alfabeam: ALFABEAM 3 1.785651722570758 3.702473732060990 2008-Aug-29 03:43:40 LOG4 log_alfabeam: ALFABEAM 4 1.791443460755273 3.667158755910555 2008-Aug-29 03:43:40 LOG4 log_alfabeam: ALFABEAM 5 1.796081269264522 3.737026283014563 2008-Aug-29 03:43:40 LOG4 log_alfabeam: ALFABEAM 6 1.794916827948422 3.841733170047152 2008-Aug-29 03:43:40 INFO2 take_data: Starting WAPP+GALFA scan: 824200040 2008-Aug-29 03:43:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:43:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:43:41 LOG5 begin_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Aug-29 03:43:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:43:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Aug-29 03:43:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:43:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:43:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:43:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27822.00 2008-Aug-29 03:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:43:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:43:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-29 03:43:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.123 0.912 1.142 1.096 2008-Aug-29 03:43:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.958 0.965 1.061 0.918 2008-Aug-29 03:43:43 LOG4 check_wapp_levels: WAPP-3 power levels: 0.923 0.948 1.146 1.000 2008-Aug-29 03:43:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.097 1.040 0.108 2008-Aug-29 03:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Aug-29 03:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Aug-29 03:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Aug-29 03:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Aug-29 03:43:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:43:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:43:52 LOG5 end_task: Level: (4) ID = <10277> Status = 0 0 0 0 ok 2008-Aug-29 03:43:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:43:52 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Aug-29 03:43:52 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Aug-29 03:43:52 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Aug-29 03:43:52 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Aug-29 03:43:52 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:43:52 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:43:52 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:43:52 LOG2 antvel: Parameters to Doppler: Topocentric 27832 2008 242 0.0 2008-Aug-29 03:43:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:43:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Aug-29 03:43:52 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Aug-29 03:43:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:43:52 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:43:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Aug-29 03:43:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:43:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-29 03:43:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:43:52 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2008-Aug-29 03:43:52 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.806646 2008.6629855248814 18.999933 2008-Aug-29 03:43:52 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555562 3.771944444444444 2008-Aug-29 03:43:52 LOG4 log_alfabeam: ALFABEAM 1 1.789206984262717 3.876804010322817 2008-Aug-29 03:43:52 LOG4 log_alfabeam: ALFABEAM 2 1.784564393171968 3.807639181130742 2008-Aug-29 03:43:52 LOG4 log_alfabeam: ALFABEAM 3 1.785636391661105 3.702704586222608 2008-Aug-29 03:43:52 LOG4 log_alfabeam: ALFABEAM 4 1.791420292600648 3.667102975172925 2008-Aug-29 03:43:52 LOG4 log_alfabeam: ALFABEAM 5 1.796073517491556 3.736740429311731 2008-Aug-29 03:43:52 LOG4 log_alfabeam: ALFABEAM 6 1.794932231727464 3.841504413589982 2008-Aug-29 03:43:52 INFO2 take_data: Starting WAPP+GALFA scan: 824200041 2008-Aug-29 03:43:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:43:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:43:53 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Aug-29 03:43:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:43:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Aug-29 03:43:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:43:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:43:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Aug-29 03:43:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27834.00 2008-Aug-29 03:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:43:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Aug-29 03:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-29 03:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-29 03:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-29 03:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Aug-29 03:44:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:44:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:44:04 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Aug-29 03:44:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:44:04 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2008-Aug-29 03:44:04 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Aug-29 03:44:04 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Aug-29 03:44:04 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Aug-29 03:44:04 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:44:04 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:44:04 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:44:04 LOG2 antvel: Parameters to Doppler: Topocentric 27844 2008 242 0.0 2008-Aug-29 03:44:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:44:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Aug-29 03:44:04 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Aug-29 03:44:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:44:04 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:44:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Aug-29 03:44:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:44:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-29 03:44:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:44:04 LOG5 begin_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2008-Aug-29 03:44:04 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.809988 2008.6629859051384 18.999933 2008-Aug-29 03:44:04 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555814 3.771944444444445 2008-Aug-29 03:44:04 LOG4 log_alfabeam: ALFABEAM 1 1.789230165175835 3.876857822766306 2008-Aug-29 03:44:04 LOG4 log_alfabeam: ALFABEAM 2 1.784572311455750 3.807923201437047 2008-Aug-29 03:44:04 LOG4 log_alfabeam: ALFABEAM 3 1.785621117612942 3.702936112728794 2008-Aug-29 03:44:04 LOG4 log_alfabeam: ALFABEAM 4 1.791397120509047 3.667048361525799 2008-Aug-29 03:44:04 LOG4 log_alfabeam: ALFABEAM 5 1.796065705239966 3.736455060985648 2008-Aug-29 03:44:04 LOG4 log_alfabeam: ALFABEAM 6 1.794947579567943 3.841274976463816 2008-Aug-29 03:44:04 INFO2 take_data: Starting WAPP+GALFA scan: 824200042 2008-Aug-29 03:44:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:44:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:44:05 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Aug-29 03:44:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:44:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Aug-29 03:44:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:44:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:44:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:44:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27846.00 2008-Aug-29 03:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Aug-29 03:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-29 03:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-29 03:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-29 03:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-29 03:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-29 03:44:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:44:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:44:16 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Aug-29 03:44:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:44:16 LOG5 end_task: Level: (3) ID = <10280> Status = 0 0 0 0 ok 2008-Aug-29 03:44:16 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Aug-29 03:44:16 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Aug-29 03:44:16 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Aug-29 03:44:16 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:44:16 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:44:16 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:44:16 LOG2 antvel: Parameters to Doppler: Topocentric 27856 2008 242 0.0 2008-Aug-29 03:44:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:44:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Aug-29 03:44:16 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Aug-29 03:44:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:44:16 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:44:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Aug-29 03:44:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:44:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-29 03:44:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:44:16 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2008-Aug-29 03:44:16 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.813331 2008.6629862853956 18.999933 2008-Aug-29 03:44:16 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555587 3.771944444444440 2008-Aug-29 03:44:16 LOG4 log_alfabeam: ALFABEAM 1 1.789253362736485 3.876910498399645 2008-Aug-29 03:44:16 LOG4 log_alfabeam: ALFABEAM 2 1.784580294020729 3.808206886066851 2008-Aug-29 03:44:16 LOG4 log_alfabeam: ALFABEAM 3 1.785605891794591 3.703168442019508 2008-Aug-29 03:44:16 LOG4 log_alfabeam: ALFABEAM 4 1.791373931407806 3.666994883915209 2008-Aug-29 03:44:16 LOG4 log_alfabeam: ALFABEAM 5 1.796057828116323 3.736170016952224 2008-Aug-29 03:44:16 LOG4 log_alfabeam: ALFABEAM 6 1.794962880141101 3.841044729334687 2008-Aug-29 03:44:16 INFO2 take_data: Starting WAPP+GALFA scan: 824200043 2008-Aug-29 03:44:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:44:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:44:17 LOG5 begin_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2008-Aug-29 03:44:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:44:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Aug-29 03:44:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:44:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:44:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:44:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27858.00 2008-Aug-29 03:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-29 03:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-29 03:44:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:44:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:44:28 LOG5 end_task: Level: (4) ID = <10283> Status = 0 0 0 0 ok 2008-Aug-29 03:44:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:44:28 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2008-Aug-29 03:44:28 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Aug-29 03:44:28 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Aug-29 03:44:28 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Aug-29 03:44:28 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:44:28 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:44:28 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:44:28 LOG2 antvel: Parameters to Doppler: Topocentric 27868 2008 242 0.0 2008-Aug-29 03:44:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:44:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Aug-29 03:44:28 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Aug-29 03:44:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:44:28 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:44:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Aug-29 03:44:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:44:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-29 03:44:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:44:28 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Aug-29 03:44:28 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.816673 2008.6629866656526 18.999933 2008-Aug-29 03:44:28 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555567 3.771944444444449 2008-Aug-29 03:44:28 LOG4 log_alfabeam: ALFABEAM 1 1.789276562271078 3.876962004256431 2008-Aug-29 03:44:28 LOG4 log_alfabeam: ALFABEAM 2 1.784588335798887 3.808490055755158 2008-Aug-29 03:44:28 LOG4 log_alfabeam: ALFABEAM 3 1.785590723818953 3.703401426913717 2008-Aug-29 03:44:28 LOG4 log_alfabeam: ALFABEAM 4 1.791350739965125 3.666942575843507 2008-Aug-29 03:44:28 LOG4 log_alfabeam: ALFABEAM 5 1.796049891118278 3.735885477387656 2008-Aug-29 03:44:28 LOG4 log_alfabeam: ALFABEAM 6 1.794978123783996 3.840813817994651 2008-Aug-29 03:44:28 INFO2 take_data: Starting WAPP+GALFA scan: 824200044 2008-Aug-29 03:44:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:44:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:44:29 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Aug-29 03:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:44:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:44:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Aug-29 03:44:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:44:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:44:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:44:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27870.00 2008-Aug-29 03:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:44:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2008-Aug-29 03:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2008-Aug-29 03:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2008-Aug-29 03:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Aug-29 03:44:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:44:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:44:40 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2008-Aug-29 03:44:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:44:40 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2008-Aug-29 03:44:40 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Aug-29 03:44:40 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Aug-29 03:44:40 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Aug-29 03:44:40 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:44:40 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:44:40 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:44:40 LOG2 antvel: Parameters to Doppler: Topocentric 27880 2008 242 0.0 2008-Aug-29 03:44:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:44:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Aug-29 03:44:40 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Aug-29 03:44:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:44:40 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:44:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Aug-29 03:44:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:44:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-29 03:44:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:44:40 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2008-Aug-29 03:44:40 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.820016 2008.6629870459096 18.999933 2008-Aug-29 03:44:40 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555660 3.771944444444448 2008-Aug-29 03:44:40 LOG4 log_alfabeam: ALFABEAM 1 1.789299776866261 3.877012369827369 2008-Aug-29 03:44:40 LOG4 log_alfabeam: ALFABEAM 2 1.784596441303625 3.808772870460909 2008-Aug-29 03:44:40 LOG4 log_alfabeam: ALFABEAM 3 1.785575605106504 3.703635198577493 2008-Aug-29 03:44:40 LOG4 log_alfabeam: ALFABEAM 4 1.791327533097997 3.666891407396168 2008-Aug-29 03:44:40 LOG4 log_alfabeam: ALFABEAM 5 1.796041889787527 3.735601281612713 2008-Aug-29 03:44:40 LOG4 log_alfabeam: ALFABEAM 6 1.794993319114784 3.840582112376408 2008-Aug-29 03:44:40 INFO2 take_data: Starting WAPP+GALFA scan: 824200045 2008-Aug-29 03:44:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:44:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:44:41 LOG5 begin_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2008-Aug-29 03:44:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:44:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Aug-29 03:44:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:44:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:44:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Aug-29 03:44:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27882.00 2008-Aug-29 03:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Aug-29 03:44:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:44:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 0.881 1.100 1.075 2008-Aug-29 03:44:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.955 0.960 1.069 0.932 2008-Aug-29 03:44:45 LOG4 check_wapp_levels: WAPP-3 power levels: 0.892 0.930 1.069 0.961 2008-Aug-29 03:44:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.099 1.050 0.110 2008-Aug-29 03:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2008-Aug-29 03:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2008-Aug-29 03:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2008-Aug-29 03:44:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:44:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:44:52 LOG5 end_task: Level: (4) ID = <10287> Status = 0 0 0 0 ok 2008-Aug-29 03:44:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:44:52 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2008-Aug-29 03:44:52 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Aug-29 03:44:52 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Aug-29 03:44:52 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Aug-29 03:44:52 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:44:52 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:44:52 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:44:52 LOG2 antvel: Parameters to Doppler: Topocentric 27892 2008 242 0.0 2008-Aug-29 03:44:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:44:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Aug-29 03:44:52 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Aug-29 03:44:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:44:52 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:44:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Aug-29 03:44:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:44:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-29 03:44:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:44:52 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Aug-29 03:44:52 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.823358 2008.6629874261666 18.999933 2008-Aug-29 03:44:52 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555625 3.771944444444444 2008-Aug-29 03:44:52 LOG4 log_alfabeam: ALFABEAM 1 1.789322991837242 3.877061563768754 2008-Aug-29 03:44:52 LOG4 log_alfabeam: ALFABEAM 2 1.784604605380992 3.809055151536735 2008-Aug-29 03:44:52 LOG4 log_alfabeam: ALFABEAM 3 1.785560545194971 3.703869608823131 2008-Aug-29 03:44:52 LOG4 log_alfabeam: ALFABEAM 4 1.791304325486982 3.666841410453438 2008-Aug-29 03:44:52 LOG4 log_alfabeam: ALFABEAM 5 1.796033829209048 3.735317609201866 2008-Aug-29 03:44:52 LOG4 log_alfabeam: ALFABEAM 6 1.795008456545367 3.840349759290686 2008-Aug-29 03:44:52 INFO2 take_data: Starting WAPP+GALFA scan: 824200046 2008-Aug-29 03:44:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:44:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:44:53 LOG5 begin_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Aug-29 03:44:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:44:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Aug-29 03:44:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:44:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:44:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:44:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27894.00 2008-Aug-29 03:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.098 (still bad) 2008-Aug-29 03:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2008-Aug-29 03:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2008-Aug-29 03:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2008-Aug-29 03:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2008-Aug-29 03:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2008-Aug-29 03:45:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:45:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:45:04 LOG5 end_task: Level: (4) ID = <10289> Status = 0 0 0 0 ok 2008-Aug-29 03:45:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:45:04 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2008-Aug-29 03:45:04 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Aug-29 03:45:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 03:45:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 03:45:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 03:45:04 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2008-Aug-29 03:45:04 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 03:45:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 03:45:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 03:45:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 03:45:04 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2008-Aug-29 03:45:04 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Aug-29 03:45:04 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Aug-29 03:45:04 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Aug-29 03:45:04 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:45:04 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:45:04 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:45:04 LOG2 antvel: Parameters to Doppler: Topocentric 27904 2008 242 0.0 2008-Aug-29 03:45:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:45:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Aug-29 03:45:04 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Aug-29 03:45:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:45:04 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:45:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Aug-29 03:45:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:45:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-29 03:45:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:45:04 LOG5 begin_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Aug-29 03:45:04 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.826701 2008.6629878064236 18.999933 2008-Aug-29 03:45:04 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555621 3.771944444444445 2008-Aug-29 03:45:04 LOG4 log_alfabeam: ALFABEAM 1 1.789346220279532 3.877109614428739 2008-Aug-29 03:45:04 LOG4 log_alfabeam: ALFABEAM 2 1.784612832605196 3.809337058510078 2008-Aug-29 03:45:04 LOG4 log_alfabeam: ALFABEAM 3 1.785545535557914 3.704104789528826 2008-Aug-29 03:45:04 LOG4 log_alfabeam: ALFABEAM 4 1.791281104040612 3.666792556242874 2008-Aug-29 03:45:04 LOG4 log_alfabeam: ALFABEAM 5 1.796025704863843 3.735034299897251 2008-Aug-29 03:45:04 LOG4 log_alfabeam: ALFABEAM 6 1.795023544642257 3.840116627950587 2008-Aug-29 03:45:04 INFO2 take_data: Starting WAPP+GALFA scan: 824200047 2008-Aug-29 03:45:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:45:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:45:05 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Aug-29 03:45:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:45:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Aug-29 03:45:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:45:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:45:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:45:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27906.00 2008-Aug-29 03:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2008-Aug-29 03:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.586 (still bad) 2008-Aug-29 03:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.585 (still bad) 2008-Aug-29 03:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.584 (still bad) 2008-Aug-29 03:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.584 (still bad) 2008-Aug-29 03:45:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:45:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:45:16 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2008-Aug-29 03:45:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:45:16 LOG5 end_task: Level: (3) ID = <10291> Status = 0 0 0 0 ok 2008-Aug-29 03:45:16 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Aug-29 03:45:16 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Aug-29 03:45:16 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Aug-29 03:45:16 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:45:16 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:45:16 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:45:16 LOG2 antvel: Parameters to Doppler: Topocentric 27916 2008 242 0.0 2008-Aug-29 03:45:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:45:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Aug-29 03:45:16 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Aug-29 03:45:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:45:16 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:45:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Aug-29 03:45:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:45:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-29 03:45:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:45:16 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2008-Aug-29 03:45:16 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.830043 2008.6629881866809 18.999933 2008-Aug-29 03:45:16 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555568 3.771944444444443 2008-Aug-29 03:45:16 LOG4 log_alfabeam: ALFABEAM 1 1.789369447498572 3.877156492089709 2008-Aug-29 03:45:16 LOG4 log_alfabeam: ALFABEAM 2 1.784621117736894 3.809618413380169 2008-Aug-29 03:45:16 LOG4 log_alfabeam: ALFABEAM 3 1.785530585655279 3.704340591526126 2008-Aug-29 03:45:16 LOG4 log_alfabeam: ALFABEAM 4 1.791257883448515 3.666744875019087 2008-Aug-29 03:45:16 LOG4 log_alfabeam: ALFABEAM 5 1.796017521922242 3.734751532642295 2008-Aug-29 03:45:16 LOG4 log_alfabeam: ALFABEAM 6 1.795038573892025 3.839882866160079 2008-Aug-29 03:45:16 INFO2 take_data: Starting WAPP+GALFA scan: 824200048 2008-Aug-29 03:45:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:45:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:45:17 LOG5 begin_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2008-Aug-29 03:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.580 (still bad) 2008-Aug-29 03:45:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:45:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Aug-29 03:45:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:45:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:45:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:45:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27918.00 2008-Aug-29 03:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.554 (still bad) 2008-Aug-29 03:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.557 (still bad) 2008-Aug-29 03:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.554 (still bad) 2008-Aug-29 03:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.560 (still bad) 2008-Aug-29 03:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.554 (still bad) 2008-Aug-29 03:45:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:45:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:45:28 LOG5 end_task: Level: (4) ID = <10294> Status = 0 0 0 0 ok 2008-Aug-29 03:45:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:45:28 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2008-Aug-29 03:45:28 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Aug-29 03:45:28 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Aug-29 03:45:28 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Aug-29 03:45:28 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:45:28 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:45:28 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:45:28 LOG2 antvel: Parameters to Doppler: Topocentric 27928 2008 242 0.0 2008-Aug-29 03:45:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:45:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Aug-29 03:45:28 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Aug-29 03:45:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:45:28 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:45:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Aug-29 03:45:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:45:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-29 03:45:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:45:28 LOG5 begin_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2008-Aug-29 03:45:28 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.833386 2008.6629885669379 18.999933 2008-Aug-29 03:45:28 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555611 3.771944444444443 2008-Aug-29 03:45:28 LOG4 log_alfabeam: ALFABEAM 1 1.789392686597100 3.877202223955011 2008-Aug-29 03:45:28 LOG4 log_alfabeam: ALFABEAM 2 1.784629465410814 3.809899375226744 2008-Aug-29 03:45:28 LOG4 log_alfabeam: ALFABEAM 3 1.785515687015219 3.704577147391179 2008-Aug-29 03:45:28 LOG4 log_alfabeam: ALFABEAM 4 1.791234650612120 3.666698339154063 2008-Aug-29 03:45:28 LOG4 log_alfabeam: ALFABEAM 5 1.796009275804506 3.734469147616928 2008-Aug-29 03:45:28 LOG4 log_alfabeam: ALFABEAM 6 1.795053552808794 3.839648342426643 2008-Aug-29 03:45:28 INFO2 take_data: Starting WAPP+GALFA scan: 824200049 2008-Aug-29 03:45:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:45:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:45:29 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Aug-29 03:45:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:45:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Aug-29 03:45:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:45:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:45:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.554 (still bad) 2008-Aug-29 03:45:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27930.00 2008-Aug-29 03:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.548 (still bad) 2008-Aug-29 03:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.547 (still bad) 2008-Aug-29 03:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.550 (still bad) 2008-Aug-29 03:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.550 (still bad) 2008-Aug-29 03:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.548 (still bad) 2008-Aug-29 03:45:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:45:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:45:40 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2008-Aug-29 03:45:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:45:40 LOG5 end_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2008-Aug-29 03:45:40 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Aug-29 03:45:40 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Aug-29 03:45:40 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Aug-29 03:45:40 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:45:40 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:45:40 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:45:40 LOG2 antvel: Parameters to Doppler: Topocentric 27940 2008 242 0.0 2008-Aug-29 03:45:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:45:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Aug-29 03:45:40 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Aug-29 03:45:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:45:40 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:45:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Aug-29 03:45:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:45:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-29 03:45:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:45:40 LOG5 begin_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2008-Aug-29 03:45:40 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.836728 2008.6629889471949 18.999933 2008-Aug-29 03:45:40 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555616 3.771944444444445 2008-Aug-29 03:45:40 LOG4 log_alfabeam: ALFABEAM 1 1.789415922874395 3.877246781935691 2008-Aug-29 03:45:40 LOG4 log_alfabeam: ALFABEAM 2 1.784637870303516 3.810179766724072 2008-Aug-29 03:45:40 LOG4 log_alfabeam: ALFABEAM 3 1.785500849019100 3.704814307001106 2008-Aug-29 03:45:40 LOG4 log_alfabeam: ALFABEAM 4 1.791211420228032 3.666652977274076 2008-Aug-29 03:45:40 LOG4 log_alfabeam: ALFABEAM 5 1.796000971766565 3.734187323104705 2008-Aug-29 03:45:40 LOG4 log_alfabeam: ALFABEAM 6 1.795068471956606 3.839413205521602 2008-Aug-29 03:45:40 INFO2 take_data: Starting WAPP+GALFA scan: 824200050 2008-Aug-29 03:45:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:45:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:45:41 LOG5 begin_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2008-Aug-29 03:45:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:45:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Aug-29 03:45:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:45:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:45:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:45:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27942.00 2008-Aug-29 03:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.548 (still bad) 2008-Aug-29 03:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.528 (still bad) 2008-Aug-29 03:45:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Aug-29 03:45:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.518 1.202 1.493 1.448 2008-Aug-29 03:45:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.308 1.319 1.507 1.280 2008-Aug-29 03:45:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.261 1.306 1.529 1.292 2008-Aug-29 03:45:46 LOG4 check_wapp_levels: WAPP-4 power levels: 1.348 0.100 1.471 0.111 2008-Aug-29 03:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.528 (still bad) 2008-Aug-29 03:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.526 (still bad) 2008-Aug-29 03:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.526 (still bad) 2008-Aug-29 03:45:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:45:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:45:52 LOG5 end_task: Level: (4) ID = <10298> Status = 0 0 0 0 ok 2008-Aug-29 03:45:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:45:52 LOG5 end_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2008-Aug-29 03:45:52 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Aug-29 03:45:52 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Aug-29 03:45:52 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Aug-29 03:45:52 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:45:52 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:45:52 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:45:52 LOG2 antvel: Parameters to Doppler: Topocentric 27952 2008 242 0.0 2008-Aug-29 03:45:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:45:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Aug-29 03:45:52 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Aug-29 03:45:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:45:52 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:45:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Aug-29 03:45:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:45:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-29 03:45:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:45:52 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Aug-29 03:45:52 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.840071 2008.6629893274519 18.999933 2008-Aug-29 03:45:52 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555602 3.771944444444447 2008-Aug-29 03:45:52 LOG4 log_alfabeam: ALFABEAM 1 1.789439169438343 3.877290192088332 2008-Aug-29 03:45:52 LOG4 log_alfabeam: ALFABEAM 2 1.784646337109265 3.810459746488123 2008-Aug-29 03:45:52 LOG4 log_alfabeam: ALFABEAM 3 1.785486063249371 3.705052203615788 2008-Aug-29 03:45:52 LOG4 log_alfabeam: ALFABEAM 4 1.791188179191696 3.666608762897556 2008-Aug-29 03:45:52 LOG4 log_alfabeam: ALFABEAM 5 1.795992605167802 3.733905899739640 2008-Aug-29 03:45:52 LOG4 log_alfabeam: ALFABEAM 6 1.795083339795213 3.839177323260897 2008-Aug-29 03:45:52 INFO2 take_data: Starting WAPP+GALFA scan: 824200051 2008-Aug-29 03:45:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:45:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:45:53 LOG5 begin_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Aug-29 03:45:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:45:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Aug-29 03:45:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:45:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:45:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:45:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27954.00 2008-Aug-29 03:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.525 (still bad) 2008-Aug-29 03:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.494 (still bad) 2008-Aug-29 03:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.493 (still bad) 2008-Aug-29 03:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.496 (still bad) 2008-Aug-29 03:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.492 (still bad) 2008-Aug-29 03:46:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:46:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:46:04 LOG5 end_task: Level: (4) ID = <10300> Status = 0 0 0 0 ok 2008-Aug-29 03:46:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:46:04 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Aug-29 03:46:04 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Aug-29 03:46:04 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Aug-29 03:46:04 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Aug-29 03:46:04 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:46:04 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:46:04 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:46:04 LOG2 antvel: Parameters to Doppler: Topocentric 27964 2008 242 0.0 2008-Aug-29 03:46:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:46:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Aug-29 03:46:04 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Aug-29 03:46:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:46:04 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:46:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Aug-29 03:46:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:46:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-29 03:46:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:46:04 LOG5 begin_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2008-Aug-29 03:46:04 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.843413 2008.6629897077091 18.999933 2008-Aug-29 03:46:04 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555556 3.771944444444444 2008-Aug-29 03:46:04 LOG4 log_alfabeam: ALFABEAM 1 1.789462411584331 3.877332427954225 2008-Aug-29 03:46:04 LOG4 log_alfabeam: ALFABEAM 2 1.784654860421456 3.810739137896350 2008-Aug-29 03:46:04 LOG4 log_alfabeam: ALFABEAM 3 1.785471339007678 3.705290686184574 2008-Aug-29 03:46:04 LOG4 log_alfabeam: ALFABEAM 4 1.791164942204439 3.666565723020572 2008-Aug-29 03:46:04 LOG4 log_alfabeam: ALFABEAM 5 1.795984181348457 3.733625055116783 2008-Aug-29 03:46:04 LOG4 log_alfabeam: ALFABEAM 6 1.795098146967433 3.838940845356875 2008-Aug-29 03:46:04 INFO2 take_data: Starting WAPP+GALFA scan: 824200052 2008-Aug-29 03:46:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:46:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:46:05 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-Aug-29 03:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.494 (still bad) 2008-Aug-29 03:46:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:46:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Aug-29 03:46:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:46:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:46:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:46:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27966.00 2008-Aug-29 03:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.492 (still bad) 2008-Aug-29 03:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.489 (still bad) 2008-Aug-29 03:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.487 (still bad) 2008-Aug-29 03:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.489 (still bad) 2008-Aug-29 03:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.488 (still bad) 2008-Aug-29 03:46:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:46:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:46:16 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2008-Aug-29 03:46:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:46:16 LOG5 end_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2008-Aug-29 03:46:16 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Aug-29 03:46:16 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Aug-29 03:46:16 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Aug-29 03:46:16 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:46:16 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:46:16 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:46:16 LOG2 antvel: Parameters to Doppler: Topocentric 27976 2008 242 0.0 2008-Aug-29 03:46:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:46:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Aug-29 03:46:16 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Aug-29 03:46:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:46:16 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:46:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Aug-29 03:46:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:46:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-29 03:46:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:46:16 LOG5 begin_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Aug-29 03:46:16 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.846755 2008.6629900879661 18.999933 2008-Aug-29 03:46:16 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555592 3.771944444444445 2008-Aug-29 03:46:16 LOG4 log_alfabeam: ALFABEAM 1 1.789485655469319 3.877373502325096 2008-Aug-29 03:46:16 LOG4 log_alfabeam: ALFABEAM 2 1.784663442417167 3.811018015716261 2008-Aug-29 03:46:16 LOG4 log_alfabeam: ALFABEAM 3 1.785456672312073 3.705529816987261 2008-Aug-29 03:46:16 LOG4 log_alfabeam: ALFABEAM 4 1.791141703111106 3.666523844666849 2008-Aug-29 03:46:16 LOG4 log_alfabeam: ALFABEAM 5 1.795975698155301 3.733344714148410 2008-Aug-29 03:46:16 LOG4 log_alfabeam: ALFABEAM 6 1.795112897473183 3.838703710001883 2008-Aug-29 03:46:16 INFO2 take_data: Starting WAPP+GALFA scan: 824200053 2008-Aug-29 03:46:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:46:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:46:17 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-Aug-29 03:46:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:46:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Aug-29 03:46:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:46:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:46:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.490 (still bad) 2008-Aug-29 03:46:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27978.00 2008-Aug-29 03:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.490 (still bad) 2008-Aug-29 03:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.483 (still bad) 2008-Aug-29 03:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.483 (still bad) 2008-Aug-29 03:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.482 (still bad) 2008-Aug-29 03:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.484 (still bad) 2008-Aug-29 03:46:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:46:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:46:28 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-Aug-29 03:46:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:46:28 LOG5 end_task: Level: (3) ID = <10303> Status = 0 0 0 0 ok 2008-Aug-29 03:46:28 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Aug-29 03:46:28 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Aug-29 03:46:28 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Aug-29 03:46:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 03:46:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 03:46:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 03:46:28 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-Aug-29 03:46:28 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 03:46:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 03:46:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 03:46:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 03:46:28 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2008-Aug-29 03:46:28 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Aug-29 03:46:28 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Aug-29 03:46:28 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Aug-29 03:46:28 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Aug-29 03:46:28 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:46:28 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:46:28 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:46:28 LOG2 antvel: Parameters to Doppler: Topocentric 27988 2008 242 0.0 2008-Aug-29 03:46:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:46:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Aug-29 03:46:28 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Aug-29 03:46:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:46:28 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:46:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Aug-29 03:46:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:46:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-29 03:46:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:46:28 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2008-Aug-29 03:46:28 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.850098 2008.6629904682231 18.999933 2008-Aug-29 03:46:28 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555594 3.771944444444445 2008-Aug-29 03:46:28 LOG4 log_alfabeam: ALFABEAM 1 1.789508907252756 3.877413426722791 2008-Aug-29 03:46:28 LOG4 log_alfabeam: ALFABEAM 2 1.784672085337745 3.811296454162111 2008-Aug-29 03:46:28 LOG4 log_alfabeam: ALFABEAM 3 1.785442059242909 3.705769659020702 2008-Aug-29 03:46:28 LOG4 log_alfabeam: ALFABEAM 4 1.791118455753445 3.666483116129974 2008-Aug-29 03:46:28 LOG4 log_alfabeam: ALFABEAM 5 1.795967153369996 3.733064802289265 2008-Aug-29 03:46:28 LOG4 log_alfabeam: ALFABEAM 6 1.795127595250711 3.838465854661539 2008-Aug-29 03:46:28 INFO2 take_data: Starting WAPP+GALFA scan: 824200054 2008-Aug-29 03:46:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:46:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:46:29 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2008-Aug-29 03:46:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:46:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Aug-29 03:46:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:46:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:46:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:46:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27990.00 2008-Aug-29 03:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.484 (still bad) 2008-Aug-29 03:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.484 (still bad) 2008-Aug-29 03:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Aug-29 03:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Aug-29 03:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Aug-29 03:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.147 (still bad) 2008-Aug-29 03:46:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:46:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:46:40 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2008-Aug-29 03:46:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:46:40 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2008-Aug-29 03:46:40 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Aug-29 03:46:40 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Aug-29 03:46:40 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Aug-29 03:46:40 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:46:40 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:46:40 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:46:40 LOG2 antvel: Parameters to Doppler: Topocentric 28000 2008 242 0.0 2008-Aug-29 03:46:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:46:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Aug-29 03:46:40 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Aug-29 03:46:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:46:40 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:46:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Aug-29 03:46:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:46:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-29 03:46:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:46:40 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Aug-29 03:46:40 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.853440 2008.6629908484801 18.999933 2008-Aug-29 03:46:40 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555556 3.771944444444443 2008-Aug-29 03:46:40 LOG4 log_alfabeam: ALFABEAM 1 1.789532152228565 3.877452177135206 2008-Aug-29 03:46:40 LOG4 log_alfabeam: ALFABEAM 2 1.784680783653994 3.811574277717990 2008-Aug-29 03:46:40 LOG4 log_alfabeam: ALFABEAM 3 1.785427508979465 3.706010059893927 2008-Aug-29 03:46:40 LOG4 log_alfabeam: ALFABEAM 4 1.791095214834974 3.666443561959141 2008-Aug-29 03:46:40 LOG4 log_alfabeam: ALFABEAM 5 1.795958552456838 3.732785496049338 2008-Aug-29 03:46:40 LOG4 log_alfabeam: ALFABEAM 6 1.795142231063525 3.838227430409414 2008-Aug-29 03:46:40 INFO2 take_data: Starting WAPP+GALFA scan: 824200055 2008-Aug-29 03:46:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:46:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:46:41 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Aug-29 03:46:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:46:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Aug-29 03:46:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:46:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:46:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:46:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28002.00 2008-Aug-29 03:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.148 (still bad) 2008-Aug-29 03:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Aug-29 03:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Aug-29 03:46:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:46:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.123 0.904 1.135 1.092 2008-Aug-29 03:46:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.969 0.976 1.114 0.948 2008-Aug-29 03:46:48 LOG4 check_wapp_levels: WAPP-3 power levels: 0.921 0.946 1.126 0.986 2008-Aug-29 03:46:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.977 0.099 1.069 0.110 2008-Aug-29 03:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Aug-29 03:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Aug-29 03:46:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:46:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:46:52 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Aug-29 03:46:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:46:52 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Aug-29 03:46:52 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Aug-29 03:46:52 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Aug-29 03:46:52 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Aug-29 03:46:52 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:46:52 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:46:52 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:46:52 LOG2 antvel: Parameters to Doppler: Topocentric 28012 2008 242 0.0 2008-Aug-29 03:46:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:46:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Aug-29 03:46:52 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Aug-29 03:46:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:46:52 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:46:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Aug-29 03:46:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:46:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-29 03:46:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:46:52 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Aug-29 03:46:52 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.856783 2008.6629912287372 18.999933 2008-Aug-29 03:46:52 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555550 3.771944444444445 2008-Aug-29 03:46:52 LOG4 log_alfabeam: ALFABEAM 1 1.789555403512570 3.877489776745552 2008-Aug-29 03:46:52 LOG4 log_alfabeam: ALFABEAM 2 1.784689542207229 3.811851643770593 2008-Aug-29 03:46:52 LOG4 log_alfabeam: ALFABEAM 3 1.785413013244527 3.706251154512298 2008-Aug-29 03:46:52 LOG4 log_alfabeam: ALFABEAM 4 1.791071967242309 3.666405158545901 2008-Aug-29 03:46:52 LOG4 log_alfabeam: ALFABEAM 5 1.795949890626772 3.732506637268267 2008-Aug-29 03:46:52 LOG4 log_alfabeam: ALFABEAM 6 1.795156813233028 3.837988303395425 2008-Aug-29 03:46:52 INFO2 take_data: Starting WAPP+GALFA scan: 824200056 2008-Aug-29 03:46:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:46:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:46:53 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Aug-29 03:46:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:46:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Aug-29 03:46:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:46:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:46:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:46:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28014.00 2008-Aug-29 03:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Aug-29 03:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-29 03:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-29 03:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-29 03:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-29 03:47:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:47:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:47:04 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Aug-29 03:47:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:47:04 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2008-Aug-29 03:47:04 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Aug-29 03:47:04 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Aug-29 03:47:04 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Aug-29 03:47:04 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:47:04 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:47:04 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:47:04 LOG2 antvel: Parameters to Doppler: Topocentric 28024 2008 242 0.0 2008-Aug-29 03:47:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:47:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Aug-29 03:47:04 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Aug-29 03:47:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:47:04 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:47:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Aug-29 03:47:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:47:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-29 03:47:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:47:04 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2008-Aug-29 03:47:04 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.860125 2008.6629916089944 18.999933 2008-Aug-29 03:47:04 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555560 3.771944444444443 2008-Aug-29 03:47:04 LOG4 log_alfabeam: ALFABEAM 1 1.789578646400891 3.877526203172430 2008-Aug-29 03:47:04 LOG4 log_alfabeam: ALFABEAM 2 1.784698355387996 3.812128377575626 2008-Aug-29 03:47:04 LOG4 log_alfabeam: ALFABEAM 3 1.785398581134057 3.706492789625845 2008-Aug-29 03:47:04 LOG4 log_alfabeam: ALFABEAM 4 1.791048727677484 3.666367928808233 2008-Aug-29 03:47:04 LOG4 log_alfabeam: ALFABEAM 5 1.795941173425445 3.732228401698198 2008-Aug-29 03:47:04 LOG4 log_alfabeam: ALFABEAM 6 1.795171332604646 3.837748625566481 2008-Aug-29 03:47:04 INFO2 take_data: Starting WAPP+GALFA scan: 824200057 2008-Aug-29 03:47:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:47:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:47:05 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2008-Aug-29 03:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-29 03:47:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:47:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Aug-29 03:47:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:47:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:47:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:47:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28026.00 2008-Aug-29 03:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:47:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-29 03:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-29 03:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:47:16 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 03:47:16.300 (seconds: 13636.300)!} 2008-Aug-29 03:47:16 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 03:47:16.300 (seconds: 13636.300)! 2008-Aug-29 03:47:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:47:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:47:16 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2008-Aug-29 03:47:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:47:16 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2008-Aug-29 03:47:16 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Aug-29 03:47:16 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Aug-29 03:47:16 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Aug-29 03:47:16 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:47:16 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:47:16 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:47:16 LOG2 antvel: Parameters to Doppler: Topocentric 28036 2008 242 0.0 2008-Aug-29 03:47:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:47:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Aug-29 03:47:16 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Aug-29 03:47:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:47:16 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:47:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Aug-29 03:47:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:47:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-29 03:47:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:47:16 LOG5 begin_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Aug-29 03:47:16 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.863468 2008.6629919892514 18.999933 2008-Aug-29 03:47:16 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555580 3.771944444444445 2008-Aug-29 03:47:16 LOG4 log_alfabeam: ALFABEAM 1 1.789601894010064 3.877561478447884 2008-Aug-29 03:47:16 LOG4 log_alfabeam: ALFABEAM 2 1.784707228095343 3.812404636000571 2008-Aug-29 03:47:16 LOG4 log_alfabeam: ALFABEAM 3 1.785384204428289 3.706735100772259 2008-Aug-29 03:47:16 LOG4 log_alfabeam: ALFABEAM 4 1.791025483026007 3.666331850289045 2008-Aug-29 03:47:16 LOG4 log_alfabeam: ALFABEAM 5 1.795932396005405 3.731950631688873 2008-Aug-29 03:47:16 LOG4 log_alfabeam: ALFABEAM 6 1.795185797443100 3.837508262431726 2008-Aug-29 03:47:16 INFO2 take_data: Starting WAPP+GALFA scan: 824200058 2008-Aug-29 03:47:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:47:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:47:17 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Aug-29 03:47:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:47:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Aug-29 03:47:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:47:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:47:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-29 03:47:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28038.00 2008-Aug-29 03:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-29 03:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Aug-29 03:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2008-Aug-29 03:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Aug-29 03:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2008-Aug-29 03:47:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:47:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:47:28 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Aug-29 03:47:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:47:28 LOG5 end_task: Level: (3) ID = <10314> Status = 0 0 0 0 ok 2008-Aug-29 03:47:28 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Aug-29 03:47:28 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Aug-29 03:47:28 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Aug-29 03:47:28 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:47:28 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:47:28 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:47:28 LOG2 antvel: Parameters to Doppler: Topocentric 28048 2008 242 0.0 2008-Aug-29 03:47:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:47:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Aug-29 03:47:28 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Aug-29 03:47:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:47:28 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:47:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Aug-29 03:47:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:47:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-29 03:47:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:47:28 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2008-Aug-29 03:47:28 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.866810 2008.6629923695084 18.999933 2008-Aug-29 03:47:28 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555571 3.771944444444444 2008-Aug-29 03:47:28 LOG4 log_alfabeam: ALFABEAM 1 1.789625131640707 3.877595581819959 2008-Aug-29 03:47:28 LOG4 log_alfabeam: ALFABEAM 2 1.784716154640716 3.812680245099354 2008-Aug-29 03:47:28 LOG4 log_alfabeam: ALFABEAM 3 1.785369892138711 3.706977933870759 2008-Aug-29 03:47:28 LOG4 log_alfabeam: ALFABEAM 4 1.791002247985939 3.666296944276210 2008-Aug-29 03:47:28 LOG4 log_alfabeam: ALFABEAM 5 1.795923563992606 3.731673502207667 2008-Aug-29 03:47:28 LOG4 log_alfabeam: ALFABEAM 6 1.795200198677084 3.837267366783600 2008-Aug-29 03:47:28 INFO2 take_data: Starting WAPP+GALFA scan: 824200059 2008-Aug-29 03:47:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:47:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:47:29 LOG5 begin_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2008-Aug-29 03:47:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:47:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Aug-29 03:47:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:47:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:47:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:47:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28050.00 2008-Aug-29 03:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2008-Aug-29 03:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2008-Aug-29 03:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2008-Aug-29 03:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2008-Aug-29 03:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2008-Aug-29 03:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2008-Aug-29 03:47:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:47:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:47:40 LOG5 end_task: Level: (4) ID = <10317> Status = 0 0 0 0 ok 2008-Aug-29 03:47:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:47:40 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2008-Aug-29 03:47:40 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Aug-29 03:47:40 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Aug-29 03:47:40 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Aug-29 03:47:40 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:47:40 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:47:40 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:47:40 LOG2 antvel: Parameters to Doppler: Topocentric 28060 2008 242 0.0 2008-Aug-29 03:47:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:47:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Aug-29 03:47:40 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Aug-29 03:47:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:47:40 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:47:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Aug-29 03:47:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:47:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-29 03:47:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:47:40 LOG5 begin_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Aug-29 03:47:40 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.870153 2008.6629927497654 18.999933 2008-Aug-29 03:47:40 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555589 3.771944444444445 2008-Aug-29 03:47:40 LOG4 log_alfabeam: ALFABEAM 1 1.789648372408875 3.877628534168823 2008-Aug-29 03:47:40 LOG4 log_alfabeam: ALFABEAM 2 1.784725139980293 3.812955361204685 2008-Aug-29 03:47:40 LOG4 log_alfabeam: ALFABEAM 3 1.785355636103959 3.707221425076243 2008-Aug-29 03:47:40 LOG4 log_alfabeam: ALFABEAM 4 1.790979009442975 3.666263189464574 2008-Aug-29 03:47:40 LOG4 log_alfabeam: ALFABEAM 5 1.795914672481683 3.731396856130085 2008-Aug-29 03:47:40 LOG4 log_alfabeam: ALFABEAM 6 1.795214544513915 3.837025803505320 2008-Aug-29 03:47:40 INFO2 take_data: Starting WAPP+GALFA scan: 824200060 2008-Aug-29 03:47:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:47:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:47:41 LOG5 begin_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2008-Aug-29 03:47:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:47:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Aug-29 03:47:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:47:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:47:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28062.00 2008-Aug-29 03:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2008-Aug-29 03:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2008-Aug-29 03:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2008-Aug-29 03:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2008-Aug-29 03:47:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-29 03:47:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.087 0.879 1.095 1.071 2008-Aug-29 03:47:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.956 1.065 0.929 2008-Aug-29 03:47:50 LOG4 check_wapp_levels: WAPP-3 power levels: 0.890 0.927 1.060 0.956 2008-Aug-29 03:47:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.099 1.049 0.110 2008-Aug-29 03:47:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:47:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:47:52 LOG5 end_task: Level: (4) ID = <10319> Status = 0 0 0 0 ok 2008-Aug-29 03:47:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:47:52 LOG5 end_task: Level: (3) ID = <10318> Status = 0 0 0 0 ok 2008-Aug-29 03:47:52 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Aug-29 03:47:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-29 03:47:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-29 03:47:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 03:47:52 LOG5 begin_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2008-Aug-29 03:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2008-Aug-29 03:47:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 03:47:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-29 03:47:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 03:47:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 03:47:52 LOG5 end_task: Level: (3) ID = <10320> Status = 0 0 0 0 ok 2008-Aug-29 03:47:52 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Aug-29 03:47:52 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Aug-29 03:47:52 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Aug-29 03:47:52 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:47:52 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:47:52 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:47:52 LOG2 antvel: Parameters to Doppler: Topocentric 28072 2008 242 0.0 2008-Aug-29 03:47:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:47:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Aug-29 03:47:52 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Aug-29 03:47:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:47:52 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:47:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Aug-29 03:47:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:47:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-29 03:47:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:47:52 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Aug-29 03:47:52 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.873495 2008.6629931300224 18.999933 2008-Aug-29 03:47:52 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555559 3.771944444444445 2008-Aug-29 03:47:52 LOG4 log_alfabeam: ALFABEAM 1 1.789671601621929 3.877660316369900 2008-Aug-29 03:47:52 LOG4 log_alfabeam: ALFABEAM 2 1.784734178347610 3.813229811194797 2008-Aug-29 03:47:52 LOG4 log_alfabeam: ALFABEAM 3 1.785341445249703 3.707465419505632 2008-Aug-29 03:47:52 LOG4 log_alfabeam: ALFABEAM 4 1.790955782088788 3.666230605513957 2008-Aug-29 03:47:52 LOG4 log_alfabeam: ALFABEAM 5 1.795905727177566 3.731120867612276 2008-Aug-29 03:47:52 LOG4 log_alfabeam: ALFABEAM 6 1.795228825966723 3.836783726206863 2008-Aug-29 03:47:52 INFO2 take_data: Starting WAPP+GALFA scan: 824200061 2008-Aug-29 03:47:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:47:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:47:53 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-Aug-29 03:47:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:47:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Aug-29 03:47:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:47:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:47:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:47:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28074.00 2008-Aug-29 03:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.475 (still bad) 2008-Aug-29 03:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.588 (still bad) 2008-Aug-29 03:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.586 (still bad) 2008-Aug-29 03:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.586 (still bad) 2008-Aug-29 03:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.586 (still bad) 2008-Aug-29 03:48:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:48:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:48:04 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-Aug-29 03:48:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:48:04 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Aug-29 03:48:04 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Aug-29 03:48:04 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Aug-29 03:48:04 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Aug-29 03:48:04 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:48:04 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:48:04 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:48:04 LOG2 antvel: Parameters to Doppler: Topocentric 28084 2008 242 0.0 2008-Aug-29 03:48:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:48:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Aug-29 03:48:04 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Aug-29 03:48:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:48:04 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:48:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Aug-29 03:48:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:48:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-29 03:48:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:48:04 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2008-Aug-29 03:48:04 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.876838 2008.6629935102796 18.999933 2008-Aug-29 03:48:04 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555578 3.771944444444439 2008-Aug-29 03:48:04 LOG4 log_alfabeam: ALFABEAM 1 1.789694832394161 3.877690948151233 2008-Aug-29 03:48:04 LOG4 log_alfabeam: ALFABEAM 2 1.784743274755479 3.813503750852199 2008-Aug-29 03:48:04 LOG4 log_alfabeam: ALFABEAM 3 1.785327311473589 3.707710053915776 2008-Aug-29 03:48:04 LOG4 log_alfabeam: ALFABEAM 4 1.790932552810682 3.666199172271456 2008-Aug-29 03:48:04 LOG4 log_alfabeam: ALFABEAM 5 1.795896723117775 3.730845380071036 2008-Aug-29 03:48:04 LOG4 log_alfabeam: ALFABEAM 6 1.795243051184666 3.836540999160440 2008-Aug-29 03:48:04 INFO2 take_data: Starting WAPP+GALFA scan: 824200062 2008-Aug-29 03:48:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:48:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:48:05 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Aug-29 03:48:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:48:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Aug-29 03:48:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:48:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:48:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:48:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28086.00 2008-Aug-29 03:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.585 (still bad) 2008-Aug-29 03:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.558 (still bad) 2008-Aug-29 03:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.557 (still bad) 2008-Aug-29 03:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.558 (still bad) 2008-Aug-29 03:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.561 (still bad) 2008-Aug-29 03:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.558 (still bad) 2008-Aug-29 03:48:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:48:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:48:16 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Aug-29 03:48:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:48:16 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2008-Aug-29 03:48:16 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Aug-29 03:48:16 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Aug-29 03:48:16 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Aug-29 03:48:16 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:48:16 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:48:16 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:48:16 LOG2 antvel: Parameters to Doppler: Topocentric 28096 2008 242 0.0 2008-Aug-29 03:48:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:48:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Aug-29 03:48:16 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Aug-29 03:48:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:48:16 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:48:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Aug-29 03:48:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:48:16 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-29 03:48:16 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:48:16 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2008-Aug-29 03:48:16 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.880180 2008.6629938905367 18.999933 2008-Aug-29 03:48:16 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555572 3.771944444444445 2008-Aug-29 03:48:16 LOG4 log_alfabeam: ALFABEAM 1 1.789718050042216 3.877720412012621 2008-Aug-29 03:48:16 LOG4 log_alfabeam: ALFABEAM 2 1.784752423360674 3.813777007904991 2008-Aug-29 03:48:16 LOG4 log_alfabeam: ALFABEAM 3 1.785313243614493 3.707955172650118 2008-Aug-29 03:48:16 LOG4 log_alfabeam: ALFABEAM 4 1.790909336291518 3.666168907771553 2008-Aug-29 03:48:16 LOG4 log_alfabeam: ALFABEAM 5 1.795887666084913 3.730570566825349 2008-Aug-29 03:48:16 LOG4 log_alfabeam: ALFABEAM 6 1.795257211266513 3.836297776765136 2008-Aug-29 03:48:16 INFO2 take_data: Starting WAPP+GALFA scan: 824200063 2008-Aug-29 03:48:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:48:17 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:48:17 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2008-Aug-29 03:48:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:48:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Aug-29 03:48:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:48:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:48:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:48:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28098.00 2008-Aug-29 03:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.558 (still bad) 2008-Aug-29 03:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.554 (still bad) 2008-Aug-29 03:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.549 (still bad) 2008-Aug-29 03:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.551 (still bad) 2008-Aug-29 03:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.551 (still bad) 2008-Aug-29 03:48:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:48:28 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:48:28 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2008-Aug-29 03:48:28 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:48:28 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2008-Aug-29 03:48:28 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Aug-29 03:48:28 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Aug-29 03:48:28 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Aug-29 03:48:28 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:48:28 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:48:28 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:48:28 LOG2 antvel: Parameters to Doppler: Topocentric 28108 2008 242 0.0 2008-Aug-29 03:48:28 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:48:28 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Aug-29 03:48:28 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Aug-29 03:48:28 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:48:28 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:48:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Aug-29 03:48:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:48:28 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-29 03:48:28 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:48:28 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2008-Aug-29 03:48:28 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.883523 2008.6629942707937 18.999933 2008-Aug-29 03:48:28 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555599 3.771944444444445 2008-Aug-29 03:48:28 LOG4 log_alfabeam: ALFABEAM 1 1.789741267677190 3.877748726530016 2008-Aug-29 03:48:28 LOG4 log_alfabeam: ALFABEAM 2 1.784761629232041 3.814049737570342 2008-Aug-29 03:48:28 LOG4 log_alfabeam: ALFABEAM 3 1.785299233629902 3.708200913052176 2008-Aug-29 03:48:28 LOG4 log_alfabeam: ALFABEAM 4 1.790886119421595 3.666139793013788 2008-Aug-29 03:48:28 LOG4 log_alfabeam: ALFABEAM 5 1.795878551059920 3.730296271848724 2008-Aug-29 03:48:28 LOG4 log_alfabeam: ALFABEAM 6 1.795271314302398 3.836053922697438 2008-Aug-29 03:48:28 INFO2 take_data: Starting WAPP+GALFA scan: 824200064 2008-Aug-29 03:48:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:48:29 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:48:29 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2008-Aug-29 03:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.554 (still bad) 2008-Aug-29 03:48:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:48:29 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Aug-29 03:48:29 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:48:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:48:29 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:48:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28110.00 2008-Aug-29 03:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.532 (still bad) 2008-Aug-29 03:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.530 (still bad) 2008-Aug-29 03:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.526 (still bad) 2008-Aug-29 03:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.527 (still bad) 2008-Aug-29 03:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.531 (still bad) 2008-Aug-29 03:48:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:48:40 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:48:40 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2008-Aug-29 03:48:40 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:48:40 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2008-Aug-29 03:48:40 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Aug-29 03:48:40 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Aug-29 03:48:40 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Aug-29 03:48:40 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:48:40 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66299 J 2008-Aug-29 03:48:40 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:48:40 LOG2 antvel: Parameters to Doppler: Topocentric 28120 2008 242 0.0 2008-Aug-29 03:48:40 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:48:40 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Aug-29 03:48:40 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Aug-29 03:48:40 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:48:40 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:48:40 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Aug-29 03:48:40 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:48:40 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-29 03:48:40 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:48:40 LOG5 begin_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2008-Aug-29 03:48:40 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.886865 2008.6629946510507 18.999933 2008-Aug-29 03:48:40 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555570 3.771944444444444 2008-Aug-29 03:48:40 LOG4 log_alfabeam: ALFABEAM 1 1.789764470627368 3.877775875823836 2008-Aug-29 03:48:40 LOG4 log_alfabeam: ALFABEAM 2 1.784770886450867 3.814321768451155 2008-Aug-29 03:48:40 LOG4 log_alfabeam: ALFABEAM 3 1.785285290270496 3.708447118720918 2008-Aug-29 03:48:40 LOG4 log_alfabeam: ALFABEAM 4 1.790862916872458 3.666111844410911 2008-Aug-29 03:48:40 LOG4 log_alfabeam: ALFABEAM 5 1.795869383901916 3.730022667597540 2008-Aug-29 03:48:40 LOG4 log_alfabeam: ALFABEAM 6 1.795285351477937 3.835809592116770 2008-Aug-29 03:48:40 INFO2 take_data: Starting WAPP+GALFA scan: 824200065 2008-Aug-29 03:48:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:48:41 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:48:41 LOG5 begin_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2008-Aug-29 03:48:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:48:41 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Aug-29 03:48:41 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:48:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:48:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.535 (still bad) 2008-Aug-29 03:48:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28122.00 2008-Aug-29 03:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.496 (still bad) 2008-Aug-29 03:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.498 (still bad) 2008-Aug-29 03:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.497 (still bad) 2008-Aug-29 03:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.496 (still bad) 2008-Aug-29 03:48:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2008-Aug-29 03:48:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.496 1.192 1.473 1.440 2008-Aug-29 03:48:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.304 1.311 1.477 1.272 2008-Aug-29 03:48:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.242 1.298 1.487 1.277 2008-Aug-29 03:48:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.338 0.100 1.461 0.111 2008-Aug-29 03:48:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:48:52 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:48:52 LOG5 end_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2008-Aug-29 03:48:52 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:48:52 LOG5 end_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2008-Aug-29 03:48:52 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Aug-29 03:48:52 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Aug-29 03:48:52 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Aug-29 03:48:52 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:48:52 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66300 J 2008-Aug-29 03:48:52 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:48:52 LOG2 antvel: Parameters to Doppler: Topocentric 28132 2008 242 0.0 2008-Aug-29 03:48:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:48:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Aug-29 03:48:52 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Aug-29 03:48:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:48:52 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:48:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Aug-29 03:48:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:48:52 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-29 03:48:52 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:48:52 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2008-Aug-29 03:48:52 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.890207 2008.6629950313077 18.999933 2008-Aug-29 03:48:52 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555591 3.771944444444445 2008-Aug-29 03:48:52 LOG4 log_alfabeam: ALFABEAM 1 1.789787665060201 3.877801869713018 2008-Aug-29 03:48:52 LOG4 log_alfabeam: ALFABEAM 2 1.784780197347355 3.814593174068033 2008-Aug-29 03:48:52 LOG4 log_alfabeam: ALFABEAM 3 1.785271409698335 3.708693853664156 2008-Aug-29 03:48:52 LOG4 log_alfabeam: ALFABEAM 4 1.790839722477796 3.666085051958555 2008-Aug-29 03:48:52 LOG4 log_alfabeam: ALFABEAM 5 1.795860162303280 3.729749680207891 2008-Aug-29 03:48:52 LOG4 log_alfabeam: ALFABEAM 6 1.795299326651196 3.835564721469762 2008-Aug-29 03:48:52 INFO2 take_data: Starting WAPP+GALFA scan: 824200066 2008-Aug-29 03:48:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:48:53 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:48:53 LOG5 begin_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Aug-29 03:48:53 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:48:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Aug-29 03:48:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:48:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:48:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:48:53 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28134.00 2008-Aug-29 03:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.498 (still bad) 2008-Aug-29 03:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:55 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.492 (still bad) 2008-Aug-29 03:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.489 (still bad) 2008-Aug-29 03:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.490 (still bad) 2008-Aug-29 03:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.492 (still bad) 2008-Aug-29 03:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.490 (still bad) 2008-Aug-29 03:49:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:49:04 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:49:04 LOG5 end_task: Level: (4) ID = <10332> Status = 0 0 0 0 ok 2008-Aug-29 03:49:04 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:49:04 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2008-Aug-29 03:49:04 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Aug-29 03:49:04 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Aug-29 03:49:04 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Aug-29 03:49:04 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:49:04 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66300 J 2008-Aug-29 03:49:04 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:49:04 LOG2 antvel: Parameters to Doppler: Topocentric 28144 2008 242 0.0 2008-Aug-29 03:49:04 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:49:04 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Aug-29 03:49:04 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Aug-29 03:49:04 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:49:04 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:49:04 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Aug-29 03:49:04 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:49:04 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-29 03:49:04 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-29 03:49:04 LOG5 begin_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2008-Aug-29 03:49:04 LOG5 log_alfabeam: Parameters: 1.7903055555555556 3.7719444444444443 1.893550 2008.6629954115649 18.999933 2008-Aug-29 03:49:04 LOG4 log_alfabeam: ALFABEAM 0 1.790305555555562 3.771944444444444 2008-Aug-29 03:49:04 LOG4 log_alfabeam: ALFABEAM 1 1.789810857135025 3.877826716749484 2008-Aug-29 03:49:04 LOG4 log_alfabeam: ALFABEAM 2 1.784789564310826 3.814864027271622 2008-Aug-29 03:49:04 LOG4 log_alfabeam: ALFABEAM 3 1.785257588143338 3.708941182486162 2008-Aug-29 03:49:04 LOG4 log_alfabeam: ALFABEAM 4 1.790816530078586 3.666059406920168 2008-Aug-29 03:49:04 LOG4 log_alfabeam: ALFABEAM 5 1.795850883896070 3.729477236476631 2008-Aug-29 03:49:04 LOG4 log_alfabeam: ALFABEAM 6 1.795313243612813 3.835319246595420 2008-Aug-29 03:49:04 INFO2 take_data: Starting WAPP+GALFA scan: 824200067 2008-Aug-29 03:49:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-29 03:49:05 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-29 03:49:05 LOG5 begin_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Aug-29 03:49:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-29 03:49:05 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Aug-29 03:49:05 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:49:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:49:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:49:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28146.00 2008-Aug-29 03:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.492 (still bad) 2008-Aug-29 03:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-29 03:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:49:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2008-Aug-29 03:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.486 (still bad) 2008-Aug-29 03:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.487 (still bad) 2008-Aug-29 03:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.487 (still bad) 2008-Aug-29 03:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.487 (still bad) 2008-Aug-29 03:49:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-29 03:49:16 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-29 03:49:16 LOG5 end_task: Level: (4) ID = <10334> Status = 0 0 0 0 ok 2008-Aug-29 03:49:16 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-29 03:49:16 LOG5 end_task: Level: (3) ID = <10333> Status = 0 0 0 0 ok 2008-Aug-29 03:49:16 INFO2 smartfreq: Switching off CAL 2008-Aug-29 03:49:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-29 03:49:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-29 03:49:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-29 03:49:16 LOG5 begin_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2008-Aug-29 03:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.487 (still bad) 2008-Aug-29 03:49:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-29 03:49:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-29 03:49:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-29 03:49:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-29 03:49:16 LOG5 end_task: Level: (3) ID = <10335> Status = 0 0 0 0 ok 2008-Aug-29 03:49:16 INFO3 restore_frequencies: Restoring original frequencies 2008-Aug-29 03:49:16 LOG5 antvel: Calling 'antvel 14725.100000 34619.000000 J 0' 2008-Aug-29 03:49:16 LOG2 antvel: Precessing RA = 01:47:25.1 Dec = +03:46:19.0 Epoch = 2008.66300 J 2008-Aug-29 03:49:16 LOG2 antvel: Computed apparent RA = 01:47:53.6 Dec = +03:49:08.1 2008-Aug-29 03:49:16 LOG2 antvel: Parameters to Doppler: Topocentric 28156 2008 242 0.0 2008-Aug-29 03:49:16 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-29 03:49:16 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Aug-29 03:49:16 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Aug-29 03:49:16 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-29 03:49:16 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-29 03:49:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-29 03:49:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:49:16 STOP finish_task: Finishing task 'smart frequency switching' 2008-Aug-29 03:49:16 LOG5 finish_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2008-Aug-29 03:49:16 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Aug-29 03:49:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-29 03:49:16 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Aug-29 03:49:16 LOG5 end_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2008-Aug-29 03:49:16 NOTE run_command_file: DONE with command file processing 2008-Aug-29 03:49:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Aug-29 03:49:17 STOP finish_task: Finishing task 'running command file 'command_galfacurpos'' 2008-Aug-29 03:49:17 LOG5 finish_task: Level: (1) ID = <10250> Status = 0 0 0 0 ok 2008-Aug-29 03:49:17 DONE finish_task: DONE finished running: command file 'command_galfacurpos' 2008-Aug-29 03:49:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-29 03:49:17 END end_task: Finishing task 'running command file 'command_galfacurpos'' with status 'OK' 2008-Aug-29 03:49:17 LOG5 end_task: Level: (1) ID = <10250> Status = 0 0 0 0 ok 2008-Aug-29 03:49:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-29 03:49:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-29 03:49:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:49:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:49:25 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-Aug-29 03:49:25 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-Aug-29 03:49:25 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2010} 2008-Aug-29 03:49:25 LOG3 vw_send: To DATATAKING: mvdata a2010 2008-Aug-29 03:49:25 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2008-Aug-29 03:49:25 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-Aug-29 03:49:25 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-Aug-29 03:49:25 NOTE CIMA-exit_cima: Cleaning up session ... 2008-Aug-29 03:49:25 LOG4 got_cormsg: From DATATAKING: mvdata a2010 2008-Aug-29 03:49:25 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2008-Aug-29 03:49:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:49:25 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-29 03:49:27 LOG3 exec_msg: Closing socket