2008-Aug-26 23:58:15 BEGIN executive: CIMA executive starting ... 2008-Aug-26 23:58:15 NOTE executive: STARTING NEW CIMA SESSION 2008-Aug-26 23:58:15 INFO1 executive: Using CIMA version 3.0.00 'next' from 2008-06-12 15:50 2008-Aug-26 23:58:15 INFO4 executive: This is an ON-LINE session 2008-Aug-26 23:58:15 INFO4 executive: This is a REMOTE session 2008-Aug-26 23:58:15 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2008-Aug-26 23:58:16 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Kristine Spekkens' 2008-Aug-26 23:58:16 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20080826' 2008-Aug-26 23:58:16 LOG2 log_preferences: Currently applied preferences: 2008-Aug-26 23:58:16 LOG2 log_preferences: prefs(dailylog) = daily 2008-Aug-26 23:58:16 LOG2 log_preferences: prefs(offlinelog) = skip 2008-Aug-26 23:58:16 LOG2 log_preferences: prefs(datawindow) = ignore 2008-Aug-26 23:58:16 LOG2 log_preferences: prefs(limitwarning) = enabled 2008-Aug-26 23:58:16 LOG2 log_preferences: prefs(wappfailure) = abort 2008-Aug-26 23:58:16 LOG2 log_preferences: prefs(helpstyle) = stay-open 2008-Aug-26 23:58:16 LOG2 log_preferences: prefs(logcolours) = full 2008-Aug-26 23:58:16 LOG2 log_preferences: prefs(displaylevel) = INFO5 2008-Aug-26 23:58:16 LOG2 log_preferences: prefs(loglevel) = LOG5 2008-Aug-26 23:58:16 LOG2 log_preferences: prefs(displayformat) = long 2008-Aug-26 23:58:16 LOG2 log_preferences: prefs(logformat) = new 2008-Aug-26 23:58:16 LOG2 log_preferences: prefs(fontsize) = 3 2008-Aug-26 23:58:16 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2008-Aug-26 23:58:16 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2008-Aug-26 23:58:16 ALERT executive: CIMA executive ready 2008-Aug-26 23:58:19 NOTE frontend: CIMA frontend ready 2008-Aug-26 23:58:19 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:58:19 LOG4 got_cormsg: From DATATAKING: setup 2008-Aug-26 23:58:25 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2008-Aug-26 23:58:25 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2008-Aug-26 23:58:25 LOG4 got_cormsg: From DATATAKING: vw% io 2008-Aug-26 23:58:25 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2008-Aug-26 23:58:25 LOG4 got_cormsg: From DATATAKING: 2008-Aug-26 23:58:25 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2008-Aug-26 23:58:25 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2008-Aug-26 23:58:25 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2008-Aug-26 23:58:25 LOG4 got_cormsg: From DATATAKING: vw% connectall 2008-Aug-26 23:58:26 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2008-Aug-26 23:58:26 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2008-Aug-26 23:58:26 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2008-Aug-26 23:58:26 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2008-Aug-26 23:58:26 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2008-Aug-26 23:58:26 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2008-Aug-26 23:58:26 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2008-Aug-26 23:58:26 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2008-Aug-26 23:58:26 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2008-Aug-26 23:58:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:58:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:58:31 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2008-Aug-26 23:58:31 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2008-Aug-26 23:58:31 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Aug-26 23:58:31 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2008-Aug-26 23:58:31 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Aug-26 23:58:31 NOTE select_receiver: Starting to select receiver ALFA 2008-Aug-26 23:58:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Aug-26 23:58:32 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Aug-26 23:58:32 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Aug-26 23:58:32 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Aug-26 23:58:32 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Aug-26 23:58:32 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Aug-26 23:58:32 DONE finish_task: DONE finished selecting: receiver ALFA 2008-Aug-26 23:58:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-26 23:58:32 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Aug-26 23:58:32 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2008-Aug-26 23:58:32 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Aug-26 23:58:32 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Aug-26 23:58:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:58:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:58:41 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Aug-26 23:58:41 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Aug-26 23:58:41 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Aug-26 23:58:41 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Aug-26 23:58:41 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Aug-26 23:58:41 NOTE restart_wapp: Restarting all WAPPs 2008-Aug-26 23:58:41 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Aug-26 23:58:41 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Aug-26 23:58:41 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2008-Aug-26 23:58:41 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Aug-26 23:58:45 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Aug-26 23:58:45 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Aug-26 23:58:45 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Aug-26 23:58:45 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Aug-26 23:58:56 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az360.conf' 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Aug-26 23:58:57 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-26 23:58:58 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Aug-26 23:58:58 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Aug-26 23:58:58 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Aug-26 23:58:58 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Aug-26 23:58:58 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Aug-26 23:58:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Aug-26 23:58:58 INFO1 config_iflo: Selecting receiver ALFA 2008-Aug-26 23:58:58 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2008-Aug-26 23:58:58 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2008-Aug-26 23:58:58 START begin_task: Starting task 'selecting receiver ALFA' 2008-Aug-26 23:58:58 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Aug-26 23:58:58 NOTE select_receiver: Starting to select receiver ALFA 2008-Aug-26 23:58:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2008-Aug-26 23:58:58 LOG3 vw_send: To DATATAKING: setupall alfa 1400.0 2008-Aug-26 23:58:58 LOG3 vw_send: To DATATAKING: acvlbical off 2008-Aug-26 23:58:58 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2008-Aug-26 23:58:58 STOP finish_task: Finishing task 'selecting receiver ALFA' 2008-Aug-26 23:58:58 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Aug-26 23:58:58 INFO2 finish_task: DONE finished selecting: receiver ALFA 2008-Aug-26 23:58:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-26 23:58:58 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2008-Aug-26 23:58:58 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2008-Aug-26 23:58:58 START begin_task: Starting task 'waiting for receiver ALFA' 2008-Aug-26 23:58:58 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Aug-26 23:58:58 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2008-Aug-26 23:58:58 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2008-Aug-26 23:58:58 INFO1 config_iflo: Configuring rest of the IF/LO path 2008-Aug-26 23:58:58 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2008-Aug-26 23:58:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-26 23:58:58 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-26 23:58:58 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-26 23:58:58 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Aug-26 23:58:58 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-26 23:58:58 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-26 23:58:58 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2008-Aug-26 23:58:58 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-26 23:58:58 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-26 23:58:58 LOG3 vw_send: To DATATAKING: alfafb 1 2008-Aug-26 23:58:58 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2008-Aug-26 23:58:58 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Aug-26 23:58:58 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Aug-26 23:58:58 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2008-Aug-26 23:58:58 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2008-Aug-26 23:58:58 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2008-Aug-26 23:58:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-26 23:58:59 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2008-Aug-26 23:58:59 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2008-Aug-26 23:58:59 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Aug-26 23:58:59 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Aug-26 23:58:59 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Aug-26 23:58:59 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Aug-26 23:58:59 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Aug-26 23:58:59 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2008-Aug-26 23:58:59 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2008-Aug-26 23:58:59 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2008-Aug-26 23:58:59 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2008-Aug-26 23:58:59 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Aug-26 23:58:59 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2008-Aug-26 23:58:59 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Aug-26 23:58:59 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Aug-26 23:58:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-26 23:58:59 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Aug-26 23:58:59 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2008-Aug-26 23:58:59 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Aug-26 23:58:59 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2008-Aug-26 23:58:59 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2008-Aug-26 23:58:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Aug-26 23:58:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-26 23:58:59 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Aug-26 23:58:59 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: setupall alfa 1400.0 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: acvlbical off 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: alfafb 1 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2008-Aug-26 23:58:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-26 23:59:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:14 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-26 23:59:14 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Aug-26 23:59:14 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2008-Aug-26 23:59:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Aug-26 23:59:14 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Aug-26 23:59:14 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Aug-26 23:59:14 DONE finish_task: DONE finished configuration: IF/LO path 2008-Aug-26 23:59:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-26 23:59:14 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Aug-26 23:59:14 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2008-Aug-26 23:59:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Aug-26 23:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Aug-26 23:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Aug-26 23:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Aug-26 23:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Aug-26 23:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Aug-26 23:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Aug-26 23:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Aug-26 23:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-26 23:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-26 23:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-26 23:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-26 23:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Aug-26 23:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Aug-26 23:59:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Aug-26 23:59:15 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Aug-26 23:59:15 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Aug-26 23:59:15 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Aug-26 23:59:15 LOG5 begin_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Aug-26 23:59:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Aug-26 23:59:15 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Aug-26 23:59:15 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Aug-26 23:59:15 START begin_task: Starting task 'selecting calibration port' 2008-Aug-26 23:59:15 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Aug-26 23:59:15 LOG3 vw_send: To DATATAKING: calport 3 2008-Aug-26 23:59:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Aug-26 23:59:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-26 23:59:15 START begin_task: Starting task 'waiting on calport' 2008-Aug-26 23:59:15 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Aug-26 23:59:15 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2008-Aug-26 23:59:15 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Aug-26 23:59:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-26 23:59:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:15 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-26 23:59:15 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Aug-26 23:59:15 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2008-Aug-26 23:59:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Aug-26 23:59:15 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Aug-26 23:59:15 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2008-Aug-26 23:59:15 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-26 23:59:15 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-26 23:59:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-26 23:59:15 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Aug-26 23:59:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-26 23:59:15 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-26 23:59:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-26 23:59:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-26 23:59:15 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2008-Aug-26 23:59:15 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Aug-26 23:59:15 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Aug-26 23:59:15 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Aug-26 23:59:15 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Aug-26 23:59:15 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Aug-26 23:59:15 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Aug-26 23:59:16 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Aug-26 23:59:16 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Aug-26 23:59:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-26 23:59:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-26 23:59:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-26 23:59:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-26 23:59:16 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Aug-26 23:59:16 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Aug-26 23:59:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-26 23:59:16 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Aug-26 23:59:16 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-26 23:59:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-26 23:59:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-26 23:59:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-26 23:59:16 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2008-Aug-26 23:59:16 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-26 23:59:16 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-26 23:59:16 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-26 23:59:16 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-26 23:59:16 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Aug-26 23:59:16 LOG5 finish_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Aug-26 23:59:16 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Aug-26 23:59:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-26 23:59:16 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Aug-26 23:59:16 LOG5 end_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2008-Aug-26 23:59:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-26 23:59:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Aug-26 23:59:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Aug-26 23:59:16 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2008-Aug-26 23:59:16 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2008-Aug-26 23:59:16 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Aug-26 23:59:16 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Aug-26 23:59:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Aug-26 23:59:16 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Aug-26 23:59:16 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Aug-26 23:59:16 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Aug-26 23:59:16 LOG5 finish_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Aug-26 23:59:16 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Aug-26 23:59:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-26 23:59:16 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Aug-26 23:59:16 LOG5 end_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2008-Aug-26 23:59:16 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-26 23:59:17 NOTE WAPPDATA-new_file: New FITS file: wapp.20080826.a2010.0023.fits 2008-Aug-26 23:59:17 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20080826.a2010.0023.fits} 2008-Aug-26 23:59:17 NOTE CIMA-load_config_file: Configuration file 'a2010_az360.conf' applied. 2008-Aug-26 23:59:24 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Aug-26 23:59:24 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Aug-26 23:59:45 COMMAND CIMA-send_to_exec: Sending command to point to a source 2008-Aug-26 23:59:45 LOG4 exec_msg: From OBSERVER: track_new_source drift18p1 215600.0 +041530 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2008-Aug-26 23:59:45 LOG1 track_new_source: Calling 'track_new_source drift18p1 215600.0 +041530 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2008-Aug-26 23:59:45 BEGIN begin_task: Starting task 'selecting new source' 2008-Aug-26 23:59:45 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Aug-26 23:59:45 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift18p1} INFO {Selecting source 'drift18p1' ...} 2008-Aug-26 23:59:45 LOG3 track_source: Calling 'track_source drift18p1 215600.0 +041530 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2008-Aug-26 23:59:45 START begin_task: Starting task 'sending tracking commands' 2008-Aug-26 23:59:45 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Aug-26 23:59:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift18p1} INFO {Slewing to source 'drift18p1' ...} 2008-Aug-26 23:59:45 INFO1 track_source: Starting to track drift18p1 2008-Aug-26 23:59:45 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift18p1" 2008-Aug-26 23:59:45 LOG3 vw_send: To DATATAKING: set ra 215600.0 2008-Aug-26 23:59:45 LOG3 vw_send: To DATATAKING: set dec +041530 2008-Aug-26 23:59:45 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-26 23:59:45 LOG3 vw_send: To DATATAKING: pnt tr 215600.0 +041530 -CJ 2008-Aug-26 23:59:45 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Aug-26 23:59:45 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-26 23:59:45 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Aug-26 23:59:45 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-26 23:59:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-26 23:59:45 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-26 23:59:45 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2008-Aug-26 23:59:45 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2008-Aug-26 23:59:45 START begin_task: Starting task 'applying pointing corrections' 2008-Aug-26 23:59:45 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Aug-26 23:59:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2008-Aug-26 23:59:45 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2008-Aug-26 23:59:45 STOP finish_task: Finishing task 'applying pointing corrections' 2008-Aug-26 23:59:45 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Aug-26 23:59:45 INFO2 finish_task: DONE finished applying: pointing corrections 2008-Aug-26 23:59:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-26 23:59:45 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2008-Aug-26 23:59:45 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2008-Aug-26 23:59:45 STOP finish_task: Finishing task 'selecting new source' 2008-Aug-26 23:59:45 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Aug-26 23:59:45 DONE finish_task: DONE finished selecting: new source 2008-Aug-26 23:59:45 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-26 23:59:45 END end_task: Finishing task 'selecting new source' with status 'OK' 2008-Aug-26 23:59:45 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2008-Aug-26 23:59:46 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift18p1" 2008-Aug-26 23:59:46 LOG4 got_cormsg: From DATATAKING: set ra 215600.0 2008-Aug-26 23:59:46 LOG4 got_cormsg: From DATATAKING: set dec +041530 2008-Aug-26 23:59:46 LOG4 got_cormsg: From DATATAKING: vw% 215600.0 2008-Aug-26 23:59:46 LOG4 got_cormsg: From DATATAKING: vw% +041530 2008-Aug-26 23:59:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:46 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-26 23:59:46 LOG4 got_cormsg: From DATATAKING: pnt tr 215600.0 +041530 -CJ 2008-Aug-26 23:59:46 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Aug-26 23:59:46 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-26 23:59:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:46 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2008-Aug-26 23:59:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-26 23:59:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Aug-26 23:59:59 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Aug-27 00:00:00 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Aug-27 00:00:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Aug-27 00:00:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Aug-27 00:00:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Aug-27 00:00:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Aug-27 00:00:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Aug-27 00:00:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Aug-27 00:00:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Aug-27 00:00:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Aug-27 00:00:01 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Aug-27 00:00:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-27 00:00:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-27 00:00:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-27 00:00:01 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-27 00:00:01 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2008-Aug-27 00:00:01 LOG4 exec_msg: From OBSERVER: config_iflo 2008-Aug-27 00:00:01 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Aug-27 00:00:01 LOG5 begin_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Aug-27 00:00:01 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Aug-27 00:00:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Aug-27 00:00:01 LOG1 config_iflo: Receiver ALFA already selected 2008-Aug-27 00:00:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 00:00:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 00:00:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 00:00:01 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Aug-27 00:00:01 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 00:00:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 00:00:01 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2008-Aug-27 00:00:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 00:00:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 00:00:01 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Aug-27 00:00:01 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Aug-27 00:00:01 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Aug-27 00:00:01 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Aug-27 00:00:01 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Aug-27 00:00:01 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Aug-27 00:00:01 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Aug-27 00:00:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-27 00:00:01 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Aug-27 00:00:01 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Aug-27 00:00:01 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Aug-27 00:00:01 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Aug-27 00:00:01 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Aug-27 00:00:01 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Aug-27 00:00:01 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Aug-27 00:00:01 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Aug-27 00:00:01 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Aug-27 00:00:01 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Aug-27 00:00:01 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Aug-27 00:00:01 LOG3 send_ifx: Skipping if2-command 'if2_gain 8 8' since system already is properly set 2008-Aug-27 00:00:01 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Aug-27 00:00:01 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Aug-27 00:00:01 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Aug-27 00:00:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 00:00:01 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Aug-27 00:00:01 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Aug-27 00:00:01 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Aug-27 00:00:01 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Aug-27 00:00:01 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Aug-27 00:00:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Aug-27 00:00:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:00:01 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Aug-27 00:00:01 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Aug-27 00:00:01 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-27 00:00:01 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 00:00:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:00:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:00:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:00:01 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 00:00:01 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Aug-27 00:00:01 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2008-Aug-27 00:00:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Aug-27 00:00:01 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Aug-27 00:00:01 LOG5 finish_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Aug-27 00:00:01 DONE finish_task: DONE finished configuration: IF/LO path 2008-Aug-27 00:00:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-27 00:00:01 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Aug-27 00:00:01 LOG5 end_task: Level: (1) ID = <10017> Status = 0 0 0 0 ok 2008-Aug-27 00:00:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:00:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Aug-27 00:00:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Aug-27 00:00:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Aug-27 00:00:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Aug-27 00:00:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Aug-27 00:00:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Aug-27 00:00:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Aug-27 00:00:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Aug-27 00:00:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-27 00:00:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-27 00:00:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-27 00:00:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-27 00:00:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Aug-27 00:00:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Aug-27 00:00:10 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Aug-27 00:00:10 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2008-Aug-27 00:00:10 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2008-Aug-27 00:00:10 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Aug-27 00:00:10 LOG5 begin_task: Level: (1) ID = <10020> Status = 0 0 0 0 ok 2008-Aug-27 00:00:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Aug-27 00:00:10 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Aug-27 00:00:10 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Aug-27 00:00:10 START begin_task: Starting task 'selecting calibration port' 2008-Aug-27 00:00:10 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Aug-27 00:00:10 LOG3 vw_send: To DATATAKING: calport 3 2008-Aug-27 00:00:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Aug-27 00:00:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:00:10 START begin_task: Starting task 'waiting on calport' 2008-Aug-27 00:00:10 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Aug-27 00:00:10 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Aug-27 00:00:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:00:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:00:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 00:00:10 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Aug-27 00:00:10 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2008-Aug-27 00:00:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Aug-27 00:00:10 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Aug-27 00:00:10 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2008-Aug-27 00:00:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 00:00:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 00:00:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 00:00:10 LOG5 begin_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Aug-27 00:00:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:00:10 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 00:00:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 00:00:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 00:00:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 00:00:10 LOG5 end_task: Level: (2) ID = <10023> Status = 0 0 0 0 ok 2008-Aug-27 00:00:10 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Aug-27 00:00:10 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Aug-27 00:00:10 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Aug-27 00:00:10 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Aug-27 00:00:10 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Aug-27 00:00:10 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Aug-27 00:00:10 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Aug-27 00:00:10 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Aug-27 00:00:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:00:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:00:11 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:00:11 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:00:11 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Aug-27 00:00:11 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Aug-27 00:00:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 00:00:11 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2008-Aug-27 00:00:11 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 00:00:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 00:00:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 00:00:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 00:00:11 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2008-Aug-27 00:00:11 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Aug-27 00:00:11 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Aug-27 00:00:11 LOG5 finish_task: Level: (1) ID = <10020> Status = 0 0 0 0 ok 2008-Aug-27 00:00:11 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Aug-27 00:00:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-27 00:00:11 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Aug-27 00:00:11 LOG5 end_task: Level: (1) ID = <10020> Status = 0 0 0 0 ok 2008-Aug-27 00:00:11 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Aug-27 00:00:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Aug-27 00:00:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Aug-27 00:00:11 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 00:00:19 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2008-Aug-27 00:00:19 LOG4 exec_msg: From OBSERVER: new_file manual 2008-Aug-27 00:00:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:00:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:00:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:00:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:00:19 NOTE new_file: There is no need to start a new FITS-file since the current one 'wapp.20080826.a2010.0023.fits' is empty! 2008-Aug-27 00:00:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 00:00:23 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2008-Aug-27 00:00:23 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2008-Aug-27 00:00:23 BEGIN begin_task: Starting task 'adjusting WAPP power' 2008-Aug-27 00:00:23 LOG5 begin_task: Level: (1) ID = <10025> Status = 0 0 0 0 ok 2008-Aug-27 00:00:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-27 00:00:23 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-27 00:00:23 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-27 00:00:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-27 00:00:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:00:23 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-27 00:00:23 LOG5 begin_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Aug-27 00:00:23 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-27 00:00:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:00:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:00:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 00:00:26 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-27 00:00:26 LOG5 end_task: Level: (2) ID = <10026> Status = 0 0 0 0 ok 2008-Aug-27 00:00:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-27 00:00:26 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-27 00:00:26 LOG5 begin_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Aug-27 00:00:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-27 00:00:26 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-27 00:00:26 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-27 00:00:26 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-27 00:00:26 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-27 00:00:26 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-27 00:00:26 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Aug-27 00:00:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Aug-27 00:00:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:00:26 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Aug-27 00:00:26 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2008-Aug-27 00:00:26 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 2 dB --- beam 5: 5 5 dB 2008-Aug-27 00:00:26 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2008-Aug-27 00:00:26 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-27 00:00:26 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-27 00:00:26 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2008-Aug-27 00:00:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.073 1.114 ALFA beam 1: 1.095 1.086 2008-Aug-27 00:00:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.941 0.954 ALFA beam 3: 1.011 0.929 2008-Aug-27 00:00:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.042 1.099 ALFA beam 5: 1.047 0.966 2008-Aug-27 00:00:26 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.929 0.095 ALFA beam 7: 1.023 0.106 2008-Aug-27 00:00:26 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-27 00:00:26 LOG5 finish_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Aug-27 00:00:26 INFO2 finish_task: DONE finished adjusting: WAPP power 2008-Aug-27 00:00:26 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 00:00:26 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-27 00:00:26 LOG5 end_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2008-Aug-27 00:00:26 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2008-Aug-27 00:00:26 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-27 00:00:26 LOG5 finish_task: Level: (1) ID = <10025> Status = 0 0 0 0 ok 2008-Aug-27 00:00:26 DONE finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-27 00:00:26 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-27 00:00:26 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-27 00:00:27 LOG5 end_task: Level: (1) ID = <10025> Status = 0 0 0 0 ok 2008-Aug-27 00:00:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.095 < 0.75)! 2008-Aug-27 00:00:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.114 1.095 1.086 2008-Aug-27 00:00:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.954 1.011 0.929 2008-Aug-27 00:00:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.042 1.099 1.047 0.966 2008-Aug-27 00:00:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.095 1.023 0.106 2008-Aug-27 00:00:39 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2008-Aug-27 00:00:39 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift18p1 215600.0 +041530 J 0 Topocentric velocity(optical) 2008-Aug-27 00:00:39 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 360.0 19.0 hcorcal 1 loopend-ON no first 1 drift18p1 215600.0 +041530 J 0 Topocentric velocity(optical)' 2008-Aug-27 00:00:39 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2008-Aug-27 00:00:39 LOG5 begin_task: Level: (1) ID = <10029> Status = 0 0 0 0 ok 2008-Aug-27 00:00:39 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift18p1' 2008-Aug-27 00:00:39 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2008-Aug-27 00:00:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift18p1} 2008-Aug-27 00:00:39 INFO5 fixed_driftmap: Start: year = 2008.6570853930591 RA = 21:56:28.2 Dec = +04:18:06.9 2008-Aug-27 00:00:39 NOTE fixed_driftmap: Setting ZA to 14:03:06.8 ... 2008-Aug-27 00:00:39 INFO3 fixed_driftmap: Sending telescope to Az = 360.00 and ZA = 14.05 2008-Aug-27 00:00:39 LOG3 track_source: Calling 'track_source drift18p1 360.0 14.0518769384 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Aug-27 00:00:39 START begin_task: Starting task 'sending tracking commands' 2008-Aug-27 00:00:39 LOG5 begin_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Aug-27 00:00:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift18p1} INFO {Slewing to source 'drift18p1' ...} 2008-Aug-27 00:00:39 INFO1 track_source: Starting to track drift18p1 2008-Aug-27 00:00:39 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift18p1" 2008-Aug-27 00:00:39 LOG3 vw_send: To DATATAKING: set ra 360.0 2008-Aug-27 00:00:39 LOG3 vw_send: To DATATAKING: set dec 14.0518769384 2008-Aug-27 00:00:39 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-27 00:00:39 LOG3 vw_send: To DATATAKING: pnt tr 360.0 14.0518769384 -CF 2008-Aug-27 00:00:39 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Aug-27 00:00:39 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-27 00:00:39 LOG5 finish_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Aug-27 00:00:39 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-27 00:00:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 00:00:39 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-27 00:00:39 LOG5 end_task: Level: (2) ID = <10030> Status = 0 0 0 0 ok 2008-Aug-27 00:00:39 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Aug-27 00:00:39 LOG5 begin_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2008-Aug-27 00:00:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Aug-27 00:00:39 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Aug-27 00:00:39 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2008-Aug-27 00:00:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Aug-27 00:00:39 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Aug-27 00:00:39 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Aug-27 00:00:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift18p1" 2008-Aug-27 00:00:39 LOG4 got_cormsg: From DATATAKING: set ra 360.0 2008-Aug-27 00:00:39 LOG4 got_cormsg: From DATATAKING: set dec 14.0518769384 2008-Aug-27 00:00:39 LOG4 got_cormsg: From DATATAKING: vw% 360.0 2008-Aug-27 00:00:39 LOG4 got_cormsg: From DATATAKING: vw% 14.0518769384 2008-Aug-27 00:00:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:00:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-27 00:00:39 LOG4 got_cormsg: From DATATAKING: pnt tr 360.0 14.0518769384 -CF 2008-Aug-27 00:00:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Aug-27 00:00:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-27 00:00:39 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:00:40 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Aug-27 00:00:40 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Aug-27 00:00:40 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Aug-27 00:00:40 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2008-Aug-27 00:00:40 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-27 00:00:40 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Aug-27 00:00:40 LOG5 finish_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2008-Aug-27 00:00:40 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Aug-27 00:00:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 00:00:40 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Aug-27 00:00:40 LOG5 end_task: Level: (2) ID = <10031> Status = 0 0 0 0 ok 2008-Aug-27 00:00:40 START begin_task: Starting task 'waiting on telescope' 2008-Aug-27 00:00:40 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Aug-27 00:00:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-27 00:00:40 LOG3 waittrk: Start waittrk 5 2008-Aug-27 00:00:40 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-27 00:00:40 LOG5 begin_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Aug-27 00:00:45 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-27 00:00:45 LOG5 end_task: Level: (3) ID = <10034> Status = 0 0 0 0 ok 2008-Aug-27 00:00:45 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-27 00:00:45 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Aug-27 00:00:52 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-27 00:00:52 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2008-Aug-27 00:00:52 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-27 00:00:52 INFO2 waittrk: Now tracking drift18p1 2008-Aug-27 00:00:52 LOG4 waittrk: Current telescope position: Az = 359.64 ZA = 14.03 2008-Aug-27 00:00:52 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-27 00:00:52 LOG5 finish_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Aug-27 00:00:52 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-27 00:00:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 00:00:52 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-27 00:00:52 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2008-Aug-27 00:00:52 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 00:00:52 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Aug-27 00:00:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 00:00:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 00:00:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:00:52 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 00:00:52 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Aug-27 00:00:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 00:00:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:00:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:00:53 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 00:00:53 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 00:00:53 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2008-Aug-27 00:00:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 00:00:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 00:00:53 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 00:00:53 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 00:00:53 LOG5 begin_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Aug-27 00:00:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:00:53 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 00:00:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 00:00:53 LOG5 end_task: Level: (3) ID = <10038> Status = 0 0 0 0 ok 2008-Aug-27 00:00:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 00:00:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 00:00:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 00:00:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 00:00:53 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 00:00:53 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Aug-27 00:00:53 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 00:00:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 00:00:53 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2008-Aug-27 00:00:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 00:00:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 00:00:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 00:00:53 LOG5 end_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2008-Aug-27 00:00:53 LOG5 dopset_later: Calling 'dopset_later 0' 2008-Aug-27 00:00:53 INFO3 dopset_later: Setting Doppler correction now 2008-Aug-27 00:00:53 LOG5 antvel: Calling 'antvel 360.000000 14.051877 F 0' 2008-Aug-27 00:00:53 LOG2 antvel: Transforming current Az = 360.00 ZA = 14.05 to apparent RA = 21:56:55.2 Dec = +04:18:06.9 2008-Aug-27 00:00:53 LOG2 antvel: Parameters to Doppler: Topocentric 14453 2008 240 0.0 2008-Aug-27 00:00:53 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 00:00:53 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Aug-27 00:00:53 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Aug-27 00:00:53 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 00:00:53 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 00:00:53 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-27 00:00:53 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 00:00:53 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-27 00:00:53 LOG5 begin_task: Level: (2) ID = <10040> Status = 0 0 0 0 ok 2008-Aug-27 00:00:53 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-27 00:00:53 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-27 00:00:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-27 00:00:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-27 00:00:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:00:53 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-27 00:00:53 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Aug-27 00:00:53 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-27 00:00:53 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 00:00:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-27 00:00:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:00:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:00:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:00:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:00:56 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 00:00:56 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-27 00:00:56 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2008-Aug-27 00:00:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-27 00:00:56 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-27 00:00:56 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Aug-27 00:00:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-27 00:00:56 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-27 00:00:56 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-27 00:00:56 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-27 00:00:56 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-27 00:00:56 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-27 00:00:56 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Aug-27 00:00:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Aug-27 00:00:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:00:57 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2008-Aug-27 00:00:57 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2008-Aug-27 00:00:57 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 3 dB --- beam 5: 5 5 dB 2008-Aug-27 00:00:57 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2008-Aug-27 00:00:57 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-27 00:00:57 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-27 00:00:57 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2008-Aug-27 00:00:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.073 1.118 ALFA beam 1: 1.083 1.073 2008-Aug-27 00:00:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.942 0.962 ALFA beam 3: 1.031 0.950 2008-Aug-27 00:00:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.061 0.896 ALFA beam 5: 1.048 0.965 2008-Aug-27 00:00:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.948 0.097 ALFA beam 7: 1.035 0.108 2008-Aug-27 00:00:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-27 00:00:57 LOG5 finish_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Aug-27 00:00:57 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Aug-27 00:00:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 00:00:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-27 00:00:57 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2008-Aug-27 00:00:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 00:00:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-27 00:00:57 LOG5 finish_task: Level: (2) ID = <10040> Status = 0 0 0 0 ok 2008-Aug-27 00:00:57 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-27 00:00:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 00:00:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-27 00:00:57 LOG5 end_task: Level: (2) ID = <10040> Status = 0 0 0 0 ok 2008-Aug-27 00:00:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:00:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:00:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:00:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:00:57 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20080826.a2010.0023.fits' is empty! 2008-Aug-27 00:00:57 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 21:56:28.2 LST = 21:56:58.2 diff = -30.0 secs 2008-Aug-27 00:00:57 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2008-Aug-27 00:00:57 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2008-Aug-27 00:00:57 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Aug-27 00:00:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 00:00:57 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 00:00:57 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 00:00:57 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 00:00:57 LOG5 begin_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2008-Aug-27 00:00:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 00:00:57 INFO2 take_data: Starting WAPP scan: 824000001 2008-Aug-27 00:00:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 00:00:58 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 00:00:58 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Aug-27 00:00:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 00:00:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 00:00:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14459.00 2008-Aug-27 00:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 00:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 00:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 00:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:01:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Aug-27 00:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:01:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:01:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.119 1.080 1.071 2008-Aug-27 00:01:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.962 1.029 0.949 2008-Aug-27 00:01:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 0.897 1.051 0.964 2008-Aug-27 00:01:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.036 0.109 2008-Aug-27 00:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 00:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 00:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:02:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-27 00:02:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.121 1.081 1.070 2008-Aug-27 00:02:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.967 1.036 0.959 2008-Aug-27 00:02:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 0.896 1.053 0.964 2008-Aug-27 00:02:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.097 1.036 0.108 2008-Aug-27 00:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.128 (still bad) 2008-Aug-27 00:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:02:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.122 (still bad) 2008-Aug-27 00:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.136 (still bad) 2008-Aug-27 00:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.130 (still bad) 2008-Aug-27 00:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:03:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:03:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.122 1.082 1.067 2008-Aug-27 00:03:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.974 1.031 0.954 2008-Aug-27 00:03:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 0.896 1.051 0.962 2008-Aug-27 00:03:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.036 0.109 2008-Aug-27 00:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:03:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:04:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.126 (still bad) 2008-Aug-27 00:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Aug-27 00:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:04:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:04:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.141 1.082 1.070 2008-Aug-27 00:04:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.978 1.027 0.948 2008-Aug-27 00:04:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 0.897 1.054 0.965 2008-Aug-27 00:04:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.098 1.037 0.109 2008-Aug-27 00:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.115 (still bad) 2008-Aug-27 00:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.145 (still bad) 2008-Aug-27 00:05:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.126 (still bad) 2008-Aug-27 00:05:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:05:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:05:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:05:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:05:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:05:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 1.149 1.081 1.069 2008-Aug-27 00:05:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.984 1.033 0.957 2008-Aug-27 00:05:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 0.895 1.060 0.972 2008-Aug-27 00:05:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.035 0.109 2008-Aug-27 00:05:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:05:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:05:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:05:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:05:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:05:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:05:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:05:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.125 (still bad) 2008-Aug-27 00:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:06:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:06:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:06:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.138 1.081 1.067 2008-Aug-27 00:06:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.978 1.036 0.969 2008-Aug-27 00:06:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.066 0.900 1.057 0.979 2008-Aug-27 00:06:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.033 0.109 2008-Aug-27 00:06:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:06:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:06:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:06:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:06:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:06:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:06:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:06:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:06:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:06:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:06:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:07:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:07:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:07:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:07:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:07:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:07:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:07:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:07:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:07:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 00:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:07:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:07:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 1.131 1.079 1.067 2008-Aug-27 00:07:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.975 1.034 0.964 2008-Aug-27 00:07:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.064 0.900 1.057 0.970 2008-Aug-27 00:07:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.035 0.109 2008-Aug-27 00:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 00:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 00:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:08:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:08:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:08:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:08:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:08:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:08:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:08:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:08:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:08:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:08:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:08:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:08:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:08:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.125 1.078 1.068 2008-Aug-27 00:08:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.970 1.029 0.950 2008-Aug-27 00:08:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.064 0.902 1.047 0.963 2008-Aug-27 00:08:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.038 0.109 2008-Aug-27 00:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.126 (still bad) 2008-Aug-27 00:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:09:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:09:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:09:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:09:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:09:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:09:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:09:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:09:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 1.121 1.079 1.070 2008-Aug-27 00:09:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.964 1.029 0.947 2008-Aug-27 00:09:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 0.903 1.044 0.957 2008-Aug-27 00:09:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.035 0.109 2008-Aug-27 00:09:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:09:44 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:09:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.128 (still bad) 2008-Aug-27 00:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:10:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-27 00:10:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 1.119 1.078 1.066 2008-Aug-27 00:10:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.962 1.025 0.940 2008-Aug-27 00:10:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 0.898 1.045 0.956 2008-Aug-27 00:10:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.097 1.035 0.108 2008-Aug-27 00:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.136 (still bad) 2008-Aug-27 00:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:10:51 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:10:53 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:10:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:10:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:10:59 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.140 (still bad) 2008-Aug-27 00:10:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 00:10:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 00:10:59 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2008-Aug-27 00:10:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 00:10:59 LOG5 end_task: Level: (2) ID = <10044> Status = 0 0 0 0 ok 2008-Aug-27 00:10:59 LOG1 fixed_driftmap: New position: year = 2008.6571050713617 RA = 22:06:35.4 RA/Dec = 22:07:03.6 +04:18:11.2 2008-Aug-27 00:10:59 NOTE fixed_driftmap: Correcting ZA to 14:03:02.5 ... 2008-Aug-27 00:10:59 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0506829568 -CF 2008-Aug-27 00:10:59 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 00:10:59 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 00:10:59 LOG5 begin_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Aug-27 00:10:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 00:10:59 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 00:10:59 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Aug-27 00:10:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 00:10:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 00:10:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:10:59 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 00:10:59 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Aug-27 00:10:59 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0506829568 -CF 2008-Aug-27 00:10:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:10:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 00:10:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:10:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:10:59 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 00:10:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 00:10:59 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2008-Aug-27 00:10:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 00:10:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 00:10:59 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 00:10:59 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 00:10:59 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Aug-27 00:10:59 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:11:00 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 00:11:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 00:11:00 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2008-Aug-27 00:11:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 00:11:00 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 00:11:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 00:11:00 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 00:11:00 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 00:11:00 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Aug-27 00:11:00 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 00:11:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 00:11:00 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2008-Aug-27 00:11:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 00:11:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 00:11:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 00:11:00 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2008-Aug-27 00:11:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 00:11:00 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 00:11:00 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 00:11:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 00:11:00 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Aug-27 00:11:00 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 00:11:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 00:11:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 00:11:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 00:11:00 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2008-Aug-27 00:11:00 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 00:11:00 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 00:11:00 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 00:11:00 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Aug-27 00:11:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 00:11:00 INFO2 take_data: Starting WAPP scan: 824000002 2008-Aug-27 00:11:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 00:11:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 00:11:00 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Aug-27 00:11:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 00:11:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15061.00 2008-Aug-27 00:11:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.140 (still bad) 2008-Aug-27 00:11:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 00:11:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:11:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:11:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 00:11:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 00:11:02 LOG3 WAPP=2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:11:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:11:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:11:02 LOG3 WAPP=2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:11:02 LOG3 WAPP=1-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:11:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 00:11:02 LOG3 WAPP=1-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:11:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 00:11:02 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2008-Aug-27 00:11:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 00:11:02 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2008-Aug-27 00:11:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 00:11:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 00:11:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 00:11:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 00:11:02 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Aug-27 00:11:03 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 00:11:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 00:11:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 00:11:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 00:11:03 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2008-Aug-27 00:11:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 00:11:03 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 00:11:03 LOG5 finish_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Aug-27 00:11:03 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 00:11:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 00:11:03 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 00:11:03 LOG5 end_task: Level: (2) ID = <10046> Status = 0 0 0 0 ok 2008-Aug-27 00:11:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2008-Aug-27 00:11:03 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Aug-27 00:11:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:11:03 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:11:03 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:11:03 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:11:03 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 00:11:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 00:11:03 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 00:11:03 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 00:11:03 LOG5 begin_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2008-Aug-27 00:11:03 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 00:11:03 INFO2 take_data: Starting WAPP scan: 824000003 2008-Aug-27 00:11:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 00:11:03 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 00:11:03 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Aug-27 00:11:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 00:11:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 00:11:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.509 (still bad) 2008-Aug-27 00:11:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15064.00 2008-Aug-27 00:11:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0000.fits 2008-Aug-27 00:11:03 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0000.fits} 2008-Aug-27 00:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 00:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 00:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 00:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:11:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:11:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:11:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:11:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:11:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.145 (still bad) 2008-Aug-27 00:11:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.125 (still bad) 2008-Aug-27 00:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.155 (still bad) 2008-Aug-27 00:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.129 (still bad) 2008-Aug-27 00:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:11:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:11:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.119 1.076 1.064 2008-Aug-27 00:11:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.970 1.032 0.947 2008-Aug-27 00:11:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 0.898 1.045 0.956 2008-Aug-27 00:11:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.033 0.109 2008-Aug-27 00:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 00:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.122 (still bad) 2008-Aug-27 00:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.125 (still bad) 2008-Aug-27 00:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 00:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.137 (still bad) 2008-Aug-27 00:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.137 (still bad) 2008-Aug-27 00:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.135 (still bad) 2008-Aug-27 00:12:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-27 00:12:14 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.130 (still bad) 2008-Aug-27 00:12:16 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Aug-27 00:12:18 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.122 (still bad) 2008-Aug-27 00:12:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:12:22 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:12:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:12:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:12:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:12:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:12:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:12:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:12:36 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.125 (still bad) 2008-Aug-27 00:12:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:12:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-27 00:12:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.118 1.077 1.063 2008-Aug-27 00:12:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.967 1.029 0.948 2008-Aug-27 00:12:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.059 0.899 1.045 0.956 2008-Aug-27 00:12:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.097 1.034 0.108 2008-Aug-27 00:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.113 (still bad) 2008-Aug-27 00:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Aug-27 00:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 00:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.125 (still bad) 2008-Aug-27 00:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 00:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 00:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:13:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:13:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Aug-27 00:13:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Aug-27 00:13:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-27 00:13:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 1.115 1.077 1.062 2008-Aug-27 00:13:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.963 1.029 0.945 2008-Aug-27 00:13:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.064 0.901 1.044 0.954 2008-Aug-27 00:13:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.097 1.031 0.108 2008-Aug-27 00:13:49 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.126 (still bad) 2008-Aug-27 00:13:51 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:13:53 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:13:55 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Aug-27 00:13:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.115 (still bad) 2008-Aug-27 00:13:59 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:14:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:14:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.122 (still bad) 2008-Aug-27 00:14:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:14:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Aug-27 00:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.115 (still bad) 2008-Aug-27 00:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.139 (still bad) 2008-Aug-27 00:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 00:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 00:14:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:14:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 1.138 1.076 1.064 2008-Aug-27 00:14:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.970 1.031 0.943 2008-Aug-27 00:14:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.060 0.903 1.048 0.958 2008-Aug-27 00:14:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.033 0.109 2008-Aug-27 00:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:14:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 00:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:15:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:15:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:15:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:15:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:15:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:15:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:15:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:15:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 00:15:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:15:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 00:15:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:15:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:15:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:15:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:15:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 00:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 00:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 00:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 00:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 00:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:15:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:15:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 1.117 1.078 1.065 2008-Aug-27 00:15:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.959 1.029 0.940 2008-Aug-27 00:15:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.058 0.896 1.041 0.950 2008-Aug-27 00:15:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.098 1.032 0.109 2008-Aug-27 00:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 00:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 00:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 00:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 00:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-27 00:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 00:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 00:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.113 (still bad) 2008-Aug-27 00:16:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-27 00:16:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 00:16:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:16:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:16:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 00:16:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 00:16:33 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Aug-27 00:16:35 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.113 (still bad) 2008-Aug-27 00:16:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:16:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:16:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:16:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 00:16:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.113 (still bad) 2008-Aug-27 00:16:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 00:16:49 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.127 (still bad) 2008-Aug-27 00:16:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-27 00:16:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.117 1.076 1.066 2008-Aug-27 00:16:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.955 1.028 0.938 2008-Aug-27 00:16:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.059 0.896 1.039 0.948 2008-Aug-27 00:16:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.097 1.031 0.108 2008-Aug-27 00:16:53 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.115 (still bad) 2008-Aug-27 00:16:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:16:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:16:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 00:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.129 (still bad) 2008-Aug-27 00:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.113 (still bad) 2008-Aug-27 00:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.113 (still bad) 2008-Aug-27 00:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.115 (still bad) 2008-Aug-27 00:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Aug-27 00:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.110 (still bad) 2008-Aug-27 00:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-27 00:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.131 (still bad) 2008-Aug-27 00:17:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:17:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:17:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 00:17:44 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.112 (still bad) 2008-Aug-27 00:17:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.113 (still bad) 2008-Aug-27 00:17:48 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.129 (still bad) 2008-Aug-27 00:17:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Aug-27 00:17:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-27 00:17:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 1.116 1.077 1.064 2008-Aug-27 00:17:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.957 1.027 0.939 2008-Aug-27 00:17:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.060 0.899 1.044 0.949 2008-Aug-27 00:17:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.097 1.034 0.108 2008-Aug-27 00:17:54 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:17:56 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.115 (still bad) 2008-Aug-27 00:17:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.115 (still bad) 2008-Aug-27 00:18:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.132 (still bad) 2008-Aug-27 00:18:02 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:18:04 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Aug-27 00:18:06 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:18:08 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.111 (still bad) 2008-Aug-27 00:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.127 (still bad) 2008-Aug-27 00:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Aug-27 00:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.113 (still bad) 2008-Aug-27 00:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.115 (still bad) 2008-Aug-27 00:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.140 (still bad) 2008-Aug-27 00:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.128 (still bad) 2008-Aug-27 00:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.126 (still bad) 2008-Aug-27 00:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.128 (still bad) 2008-Aug-27 00:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.125 (still bad) 2008-Aug-27 00:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.141 (still bad) 2008-Aug-27 00:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.113 (still bad) 2008-Aug-27 00:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.113 (still bad) 2008-Aug-27 00:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.139 (still bad) 2008-Aug-27 00:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:18:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-27 00:18:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.114 1.077 1.063 2008-Aug-27 00:18:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.953 1.026 0.936 2008-Aug-27 00:18:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.058 0.896 1.036 0.944 2008-Aug-27 00:18:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.097 1.031 0.108 2008-Aug-27 00:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.115 (still bad) 2008-Aug-27 00:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.109 (still bad) 2008-Aug-27 00:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.138 (still bad) 2008-Aug-27 00:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Aug-27 00:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.113 (still bad) 2008-Aug-27 00:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.115 (still bad) 2008-Aug-27 00:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.112 (still bad) 2008-Aug-27 00:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.111 (still bad) 2008-Aug-27 00:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.115 (still bad) 2008-Aug-27 00:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 00:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.115 (still bad) 2008-Aug-27 00:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.113 (still bad) 2008-Aug-27 00:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.122 (still bad) 2008-Aug-27 00:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 00:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.113 (still bad) 2008-Aug-27 00:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.115 (still bad) 2008-Aug-27 00:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.114 (still bad) 2008-Aug-27 00:19:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:19:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 1.115 1.078 1.065 2008-Aug-27 00:19:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 0.955 1.026 0.937 2008-Aug-27 00:19:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.058 0.896 1.041 0.947 2008-Aug-27 00:19:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.032 0.109 2008-Aug-27 00:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Aug-27 00:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.126 (still bad) 2008-Aug-27 00:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.126 (still bad) 2008-Aug-27 00:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.126 (still bad) 2008-Aug-27 00:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.129 (still bad) 2008-Aug-27 00:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.126 (still bad) 2008-Aug-27 00:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.126 (still bad) 2008-Aug-27 00:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.132 (still bad) 2008-Aug-27 00:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.115 (still bad) 2008-Aug-27 00:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.126 (still bad) 2008-Aug-27 00:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Aug-27 00:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.116 (still bad) 2008-Aug-27 00:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.143 (still bad) 2008-Aug-27 00:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:20:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-27 00:20:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 1.119 1.079 1.064 2008-Aug-27 00:20:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 0.959 1.028 0.941 2008-Aug-27 00:20:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.060 0.899 1.039 0.949 2008-Aug-27 00:20:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.097 1.030 0.108 2008-Aug-27 00:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.143 (still bad) 2008-Aug-27 00:21:02 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:21:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 00:21:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 00:21:04 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2008-Aug-27 00:21:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 00:21:04 LOG5 end_task: Level: (2) ID = <10055> Status = 0 0 0 0 ok 2008-Aug-27 00:21:04 LOG1 fixed_driftmap: New position: year = 2008.6571242426548 RA = 22:16:42.0 RA/Dec = 22:17:10.3 +04:18:15.0 2008-Aug-27 00:21:04 NOTE fixed_driftmap: Correcting ZA to 14:02:58.7 ... 2008-Aug-27 00:21:04 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0496281626 -CF 2008-Aug-27 00:21:04 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 00:21:04 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 00:21:04 LOG5 begin_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2008-Aug-27 00:21:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 00:21:04 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 00:21:04 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Aug-27 00:21:04 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 00:21:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 00:21:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:21:04 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 00:21:04 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Aug-27 00:21:04 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:21:04 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0496281626 -CF 2008-Aug-27 00:21:04 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:21:04 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 00:21:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:21:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:21:05 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 00:21:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 00:21:05 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2008-Aug-27 00:21:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 00:21:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 00:21:05 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 00:21:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 00:21:05 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2008-Aug-27 00:21:05 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:21:05 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 00:21:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 00:21:05 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2008-Aug-27 00:21:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 00:21:05 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 00:21:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 00:21:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 00:21:05 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 00:21:05 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Aug-27 00:21:05 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 00:21:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 00:21:05 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2008-Aug-27 00:21:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 00:21:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 00:21:05 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 00:21:05 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2008-Aug-27 00:21:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 00:21:05 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 00:21:05 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 00:21:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 00:21:05 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Aug-27 00:21:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 00:21:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 00:21:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 00:21:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 00:21:05 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2008-Aug-27 00:21:05 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 00:21:05 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 00:21:05 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 00:21:05 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Aug-27 00:21:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 00:21:05 INFO2 take_data: Starting WAPP scan: 824000004 2008-Aug-27 00:21:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 00:21:06 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 00:21:06 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Aug-27 00:21:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 00:21:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15667.00 2008-Aug-27 00:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 00:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 00:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 00:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:21:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.505 (still bad) 2008-Aug-27 00:21:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 00:21:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 00:21:08 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2008-Aug-27 00:21:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 00:21:08 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2008-Aug-27 00:21:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 00:21:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 00:21:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 00:21:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 00:21:08 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Aug-27 00:21:08 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 00:21:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 00:21:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 00:21:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 00:21:08 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2008-Aug-27 00:21:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 00:21:08 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 00:21:08 LOG5 finish_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2008-Aug-27 00:21:08 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 00:21:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 00:21:08 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 00:21:08 LOG5 end_task: Level: (2) ID = <10057> Status = 0 0 0 0 ok 2008-Aug-27 00:21:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2008-Aug-27 00:21:08 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2008-Aug-27 00:21:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:21:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:21:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:21:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:21:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 00:21:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 00:21:09 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 00:21:09 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 00:21:09 LOG5 begin_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2008-Aug-27 00:21:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 00:21:09 INFO2 take_data: Starting WAPP scan: 824000005 2008-Aug-27 00:21:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 00:21:09 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 00:21:09 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Aug-27 00:21:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 00:21:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 00:21:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15670.00 2008-Aug-27 00:21:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0001.fits 2008-Aug-27 00:21:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0001.fits} 2008-Aug-27 00:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.505 (still bad) 2008-Aug-27 00:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 00:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 00:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 00:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.143 (still bad) 2008-Aug-27 00:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.145 (still bad) 2008-Aug-27 00:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.125 (still bad) 2008-Aug-27 00:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.145 (still bad) 2008-Aug-27 00:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.127 (still bad) 2008-Aug-27 00:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Aug-27 00:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.147 (still bad) 2008-Aug-27 00:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.130 (still bad) 2008-Aug-27 00:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.128 (still bad) 2008-Aug-27 00:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Aug-27 00:21:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-27 00:21:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 1.123 1.077 1.063 2008-Aug-27 00:21:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 0.959 1.027 0.942 2008-Aug-27 00:21:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 0.901 1.039 0.949 2008-Aug-27 00:21:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.097 1.032 0.108 2008-Aug-27 00:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.143 (still bad) 2008-Aug-27 00:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.127 (still bad) 2008-Aug-27 00:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Aug-27 00:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.122 (still bad) 2008-Aug-27 00:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.142 (still bad) 2008-Aug-27 00:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.126 (still bad) 2008-Aug-27 00:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.122 (still bad) 2008-Aug-27 00:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.129 (still bad) 2008-Aug-27 00:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:22:31 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 54705.182280 to 54705.182292! 2008-Aug-27 00:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:22:32 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (54705.182280 - 54705.182303)! 2008-Aug-27 00:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.131 (still bad) 2008-Aug-27 00:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.122 (still bad) 2008-Aug-27 00:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.127 (still bad) 2008-Aug-27 00:22:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:22:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.123 1.078 1.066 2008-Aug-27 00:22:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.962 1.027 0.941 2008-Aug-27 00:22:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 0.901 1.039 0.951 2008-Aug-27 00:22:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.033 0.108 2008-Aug-27 00:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.131 (still bad) 2008-Aug-27 00:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Aug-27 00:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.134 (still bad) 2008-Aug-27 00:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.138 (still bad) 2008-Aug-27 00:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Aug-27 00:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Aug-27 00:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Aug-27 00:24:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:24:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.121 1.079 1.067 2008-Aug-27 00:24:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.960 1.028 0.939 2008-Aug-27 00:24:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.091 0.927 1.042 0.950 2008-Aug-27 00:24:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.032 0.109 2008-Aug-27 00:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.135 (still bad) 2008-Aug-27 00:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.126 (still bad) 2008-Aug-27 00:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Aug-27 00:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Aug-27 00:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.125 (still bad) 2008-Aug-27 00:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.130 (still bad) 2008-Aug-27 00:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.126 (still bad) 2008-Aug-27 00:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:25:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:25:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.125 1.078 1.065 2008-Aug-27 00:25:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.961 1.030 0.943 2008-Aug-27 00:25:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 0.899 1.041 0.947 2008-Aug-27 00:25:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.034 0.109 2008-Aug-27 00:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.122 (still bad) 2008-Aug-27 00:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.122 (still bad) 2008-Aug-27 00:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Aug-27 00:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Aug-27 00:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Aug-27 00:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.117 (still bad) 2008-Aug-27 00:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.122 (still bad) 2008-Aug-27 00:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 00:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.118 (still bad) 2008-Aug-27 00:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.145 (still bad) 2008-Aug-27 00:26:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-27 00:26:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.122 1.078 1.067 2008-Aug-27 00:26:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.957 1.031 0.941 2008-Aug-27 00:26:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.061 0.900 1.047 0.954 2008-Aug-27 00:26:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.097 1.035 0.108 2008-Aug-27 00:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 00:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.128 (still bad) 2008-Aug-27 00:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.131 (still bad) 2008-Aug-27 00:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.167 (still bad) 2008-Aug-27 00:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.136 (still bad) 2008-Aug-27 00:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.132 (still bad) 2008-Aug-27 00:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.129 (still bad) 2008-Aug-27 00:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.153 (still bad) 2008-Aug-27 00:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.127 (still bad) 2008-Aug-27 00:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 00:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 00:27:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-27 00:27:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.128 1.078 1.067 2008-Aug-27 00:27:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.966 1.035 0.955 2008-Aug-27 00:27:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.067 0.904 1.046 0.954 2008-Aug-27 00:27:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.097 1.032 0.109 2008-Aug-27 00:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 00:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:27:59 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.122 (still bad) 2008-Aug-27 00:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:28:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:28:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.128 1.078 1.069 2008-Aug-27 00:28:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.962 1.035 0.949 2008-Aug-27 00:28:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.065 0.903 1.048 0.955 2008-Aug-27 00:28:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.034 0.109 2008-Aug-27 00:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.131 (still bad) 2008-Aug-27 00:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.119 (still bad) 2008-Aug-27 00:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.135 (still bad) 2008-Aug-27 00:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.125 (still bad) 2008-Aug-27 00:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 00:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.164 (still bad) 2008-Aug-27 00:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.178 (still bad) 2008-Aug-27 00:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.190 (still bad) 2008-Aug-27 00:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.184 (still bad) 2008-Aug-27 00:29:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:29:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.119 1.170 1.083 1.075 2008-Aug-27 00:29:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.969 1.047 0.958 2008-Aug-27 00:29:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.064 0.905 1.041 0.950 2008-Aug-27 00:29:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.972 0.098 1.059 0.109 2008-Aug-27 00:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 00:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:29:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:29:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:29:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:29:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-27 00:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.174 (still bad) 2008-Aug-27 00:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.180 (still bad) 2008-Aug-27 00:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.178 (still bad) 2008-Aug-27 00:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.171 (still bad) 2008-Aug-27 00:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.157 (still bad) 2008-Aug-27 00:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:30:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:30:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.122 1.080 1.070 2008-Aug-27 00:30:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.959 0.991 1.030 0.943 2008-Aug-27 00:30:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 0.904 1.038 0.950 2008-Aug-27 00:30:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.034 0.109 2008-Aug-27 00:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:30:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:30:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:30:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:30:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:30:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:30:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:30:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:31:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:31:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 1.120 1.078 1.069 2008-Aug-27 00:31:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.958 1.028 0.941 2008-Aug-27 00:31:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.065 0.904 1.036 0.949 2008-Aug-27 00:31:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.034 0.109 2008-Aug-27 00:31:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 00:31:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 00:31:10 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2008-Aug-27 00:31:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 00:31:10 LOG5 end_task: Level: (2) ID = <10066> Status = 0 0 0 0 ok 2008-Aug-27 00:31:10 LOG1 fixed_driftmap: New position: year = 2008.6571434456359 RA = 22:26:49.7 RA/Dec = 22:27:17.9 +04:18:18.5 2008-Aug-27 00:31:10 NOTE fixed_driftmap: Correcting ZA to 14:02:55.2 ... 2008-Aug-27 00:31:10 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0486570579 -CF 2008-Aug-27 00:31:10 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 00:31:10 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 00:31:10 LOG5 begin_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2008-Aug-27 00:31:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 00:31:10 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 00:31:10 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Aug-27 00:31:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 00:31:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 00:31:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:31:10 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 00:31:10 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Aug-27 00:31:10 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0486570579 -CF 2008-Aug-27 00:31:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:31:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 00:31:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:31:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:31:10 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 00:31:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 00:31:10 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2008-Aug-27 00:31:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 00:31:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 00:31:10 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 00:31:10 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 00:31:10 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Aug-27 00:31:10 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:31:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 00:31:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 00:31:11 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2008-Aug-27 00:31:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 00:31:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 00:31:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 00:31:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 00:31:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 00:31:11 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Aug-27 00:31:11 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 00:31:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 00:31:11 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2008-Aug-27 00:31:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 00:31:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 00:31:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 00:31:11 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2008-Aug-27 00:31:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 00:31:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 00:31:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 00:31:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 00:31:11 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Aug-27 00:31:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 00:31:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 00:31:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 00:31:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 00:31:12 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2008-Aug-27 00:31:12 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 00:31:12 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 00:31:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 00:31:12 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Aug-27 00:31:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 00:31:12 INFO2 take_data: Starting WAPP scan: 824000006 2008-Aug-27 00:31:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 00:31:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 00:31:12 LOG5 begin_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2008-Aug-27 00:31:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 00:31:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16273.00 2008-Aug-27 00:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 00:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 00:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 00:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:31:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.546 (still bad) 2008-Aug-27 00:31:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 00:31:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 00:31:14 LOG5 end_task: Level: (4) ID = <10075> Status = 0 0 0 0 ok 2008-Aug-27 00:31:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 00:31:14 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2008-Aug-27 00:31:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 00:31:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 00:31:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 00:31:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 00:31:14 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Aug-27 00:31:14 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 00:31:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 00:31:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 00:31:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 00:31:14 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2008-Aug-27 00:31:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 00:31:14 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 00:31:14 LOG5 finish_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2008-Aug-27 00:31:14 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 00:31:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 00:31:14 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 00:31:14 LOG5 end_task: Level: (2) ID = <10068> Status = 0 0 0 0 ok 2008-Aug-27 00:31:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2008-Aug-27 00:31:14 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2008-Aug-27 00:31:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:31:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:31:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:31:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:31:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 00:31:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 00:31:15 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 00:31:15 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 00:31:15 LOG5 begin_task: Level: (2) ID = <10077> Status = 0 0 0 0 ok 2008-Aug-27 00:31:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 00:31:15 INFO2 take_data: Starting WAPP scan: 824000007 2008-Aug-27 00:31:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 00:31:15 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 00:31:15 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Aug-27 00:31:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 00:31:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 00:31:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16276.00 2008-Aug-27 00:31:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0002.fits 2008-Aug-27 00:31:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0002.fits} 2008-Aug-27 00:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.546 (still bad) 2008-Aug-27 00:31:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 00:31:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:31:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:31:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 00:31:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 00:31:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:31:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:31:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:31:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:31:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:32:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:32:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:32:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2008-Aug-27 00:32:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 1.121 1.078 1.065 2008-Aug-27 00:32:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.958 1.031 0.942 2008-Aug-27 00:32:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 0.903 1.039 0.947 2008-Aug-27 00:32:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.097 1.033 0.109 2008-Aug-27 00:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.121 (still bad) 2008-Aug-27 00:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.122 (still bad) 2008-Aug-27 00:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.120 (still bad) 2008-Aug-27 00:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.124 (still bad) 2008-Aug-27 00:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:33:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:33:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 1.121 1.078 1.066 2008-Aug-27 00:33:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.961 1.030 0.940 2008-Aug-27 00:33:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 0.903 1.038 0.947 2008-Aug-27 00:33:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.031 0.109 2008-Aug-27 00:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 00:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 00:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 00:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 00:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 00:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 00:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 00:34:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:34:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.123 1.078 1.067 2008-Aug-27 00:34:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.960 1.034 0.943 2008-Aug-27 00:34:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 0.904 1.040 0.949 2008-Aug-27 00:34:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.034 0.109 2008-Aug-27 00:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.131 (still bad) 2008-Aug-27 00:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.126 (still bad) 2008-Aug-27 00:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 00:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.123 (still bad) 2008-Aug-27 00:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.131 (still bad) 2008-Aug-27 00:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.127 (still bad) 2008-Aug-27 00:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.145 (still bad) 2008-Aug-27 00:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.133 (still bad) 2008-Aug-27 00:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.126 (still bad) 2008-Aug-27 00:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.127 (still bad) 2008-Aug-27 00:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:35:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:35:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 1.124 1.079 1.069 2008-Aug-27 00:35:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.966 1.034 0.953 2008-Aug-27 00:35:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.065 0.906 1.046 0.957 2008-Aug-27 00:35:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.033 0.108 2008-Aug-27 00:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.132 (still bad) 2008-Aug-27 00:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.130 (still bad) 2008-Aug-27 00:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 00:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.129 (still bad) 2008-Aug-27 00:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.158 (still bad) 2008-Aug-27 00:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.136 (still bad) 2008-Aug-27 00:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:36:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:36:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.167 1.080 1.069 2008-Aug-27 00:36:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.982 1.039 0.955 2008-Aug-27 00:36:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.063 0.903 1.054 0.966 2008-Aug-27 00:36:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.031 0.109 2008-Aug-27 00:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-27 00:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.133 (still bad) 2008-Aug-27 00:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.164 (still bad) 2008-Aug-27 00:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.163 (still bad) 2008-Aug-27 00:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.136 (still bad) 2008-Aug-27 00:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.133 (still bad) 2008-Aug-27 00:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.163 (still bad) 2008-Aug-27 00:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.135 (still bad) 2008-Aug-27 00:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.134 (still bad) 2008-Aug-27 00:37:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:37:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 1.163 1.078 1.067 2008-Aug-27 00:37:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.988 1.041 0.963 2008-Aug-27 00:37:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.068 0.912 1.062 0.976 2008-Aug-27 00:37:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.032 0.109 2008-Aug-27 00:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.133 (still bad) 2008-Aug-27 00:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:38:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:38:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.142 1.077 1.068 2008-Aug-27 00:38:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.972 1.037 0.956 2008-Aug-27 00:38:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.068 0.910 1.050 0.967 2008-Aug-27 00:38:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.033 0.109 2008-Aug-27 00:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 00:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:39:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:39:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.131 1.077 1.068 2008-Aug-27 00:39:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.969 1.035 0.952 2008-Aug-27 00:39:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.067 0.908 1.045 0.960 2008-Aug-27 00:39:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.031 0.109 2008-Aug-27 00:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 00:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:40:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:40:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 1.132 1.077 1.070 2008-Aug-27 00:40:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.971 1.039 0.959 2008-Aug-27 00:40:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.068 0.907 1.048 0.961 2008-Aug-27 00:40:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.033 0.109 2008-Aug-27 00:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 00:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 00:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 00:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-27 00:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:41:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 00:41:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 00:41:16 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2008-Aug-27 00:41:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 00:41:16 LOG5 end_task: Level: (2) ID = <10077> Status = 0 0 0 0 ok 2008-Aug-27 00:41:16 LOG1 fixed_driftmap: New position: year = 2008.6571626486173 RA = 22:36:57.3 RA/Dec = 22:37:25.6 +04:18:21.7 2008-Aug-27 00:41:16 NOTE fixed_driftmap: Correcting ZA to 14:02:52.0 ... 2008-Aug-27 00:41:16 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0477733427 -CF 2008-Aug-27 00:41:16 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 00:41:16 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 00:41:16 LOG5 begin_task: Level: (2) ID = <10079> Status = 0 0 0 0 ok 2008-Aug-27 00:41:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 00:41:16 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 00:41:16 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Aug-27 00:41:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 00:41:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 00:41:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:41:16 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 00:41:16 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Aug-27 00:41:16 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0477733427 -CF 2008-Aug-27 00:41:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:41:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 00:41:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:41:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:41:16 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 00:41:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 00:41:16 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2008-Aug-27 00:41:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 00:41:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 00:41:16 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 00:41:16 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 00:41:16 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Aug-27 00:41:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:41:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 00:41:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 00:41:17 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2008-Aug-27 00:41:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 00:41:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 00:41:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 00:41:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 00:41:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 00:41:17 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Aug-27 00:41:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 00:41:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 00:41:17 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2008-Aug-27 00:41:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 00:41:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 00:41:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 00:41:17 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2008-Aug-27 00:41:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 00:41:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 00:41:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 00:41:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 00:41:17 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Aug-27 00:41:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 00:41:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 00:41:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 00:41:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 00:41:17 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2008-Aug-27 00:41:17 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 00:41:17 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 00:41:17 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 00:41:17 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Aug-27 00:41:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 00:41:17 INFO2 take_data: Starting WAPP scan: 824000008 2008-Aug-27 00:41:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 00:41:17 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 00:41:17 LOG5 begin_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Aug-27 00:41:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 00:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.171 (still bad) 2008-Aug-27 00:41:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16878.00 2008-Aug-27 00:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 00:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 00:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 00:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:41:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.534 (still bad) 2008-Aug-27 00:41:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 00:41:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 00:41:19 LOG5 end_task: Level: (4) ID = <10086> Status = 0 0 0 0 ok 2008-Aug-27 00:41:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 00:41:19 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2008-Aug-27 00:41:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 00:41:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 00:41:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 00:41:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 00:41:19 LOG5 begin_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Aug-27 00:41:20 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 00:41:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 00:41:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 00:41:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 00:41:20 LOG5 end_task: Level: (3) ID = <10087> Status = 0 0 0 0 ok 2008-Aug-27 00:41:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 00:41:20 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 00:41:20 LOG5 finish_task: Level: (2) ID = <10079> Status = 0 0 0 0 ok 2008-Aug-27 00:41:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 00:41:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 00:41:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 00:41:20 LOG5 end_task: Level: (2) ID = <10079> Status = 0 0 0 0 ok 2008-Aug-27 00:41:20 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2008-Aug-27 00:41:20 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2008-Aug-27 00:41:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:41:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:41:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:41:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:41:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 00:41:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 00:41:20 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 00:41:20 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 00:41:20 LOG5 begin_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2008-Aug-27 00:41:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 00:41:20 INFO2 take_data: Starting WAPP scan: 824000009 2008-Aug-27 00:41:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 00:41:20 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 00:41:20 LOG5 begin_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Aug-27 00:41:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 00:41:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 00:41:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16881.00 2008-Aug-27 00:41:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0003.fits 2008-Aug-27 00:41:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0003.fits} 2008-Aug-27 00:41:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:41:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.472 1.534 1.444 1.428 2008-Aug-27 00:41:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.275 1.329 1.432 1.317 2008-Aug-27 00:41:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.483 1.271 1.460 1.290 2008-Aug-27 00:41:21 LOG4 check_wapp_levels: WAPP-4 power levels: 1.319 0.098 1.436 0.109 2008-Aug-27 00:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 00:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 00:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 00:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:41:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 00:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:42:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:42:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.141 1.078 1.071 2008-Aug-27 00:42:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.977 1.038 0.961 2008-Aug-27 00:42:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.066 0.913 1.070 0.989 2008-Aug-27 00:42:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.032 0.109 2008-Aug-27 00:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.165 (still bad) 2008-Aug-27 00:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.165 (still bad) 2008-Aug-27 00:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.158 (still bad) 2008-Aug-27 00:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-27 00:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.159 (still bad) 2008-Aug-27 00:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:43:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:43:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.134 1.079 1.071 2008-Aug-27 00:43:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.972 1.035 0.953 2008-Aug-27 00:43:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.065 0.914 1.047 0.965 2008-Aug-27 00:43:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.032 0.109 2008-Aug-27 00:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.159 (still bad) 2008-Aug-27 00:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.158 (still bad) 2008-Aug-27 00:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 00:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 00:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:44:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:44:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 1.134 1.080 1.073 2008-Aug-27 00:44:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.973 1.038 0.959 2008-Aug-27 00:44:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.070 0.916 1.048 0.964 2008-Aug-27 00:44:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.035 0.109 2008-Aug-27 00:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 00:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 00:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 00:45:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:45:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.134 1.081 1.073 2008-Aug-27 00:45:26 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.976 1.036 0.959 2008-Aug-27 00:45:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.068 0.914 1.050 0.964 2008-Aug-27 00:45:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.034 0.109 2008-Aug-27 00:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 00:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 00:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:45:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 00:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.157 (still bad) 2008-Aug-27 00:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.159 (still bad) 2008-Aug-27 00:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.159 (still bad) 2008-Aug-27 00:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:46:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:46:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.138 1.081 1.070 2008-Aug-27 00:46:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.981 1.040 0.962 2008-Aug-27 00:46:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.068 0.915 1.053 0.970 2008-Aug-27 00:46:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.033 0.109 2008-Aug-27 00:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.157 (still bad) 2008-Aug-27 00:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 00:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.155 (still bad) 2008-Aug-27 00:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 00:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 00:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:47:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:47:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.069 1.168 1.083 1.073 2008-Aug-27 00:47:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.998 1.050 0.972 2008-Aug-27 00:47:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.922 1.069 0.997 2008-Aug-27 00:47:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.953 0.098 1.037 0.109 2008-Aug-27 00:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.177 (still bad) 2008-Aug-27 00:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 00:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 00:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.177 (still bad) 2008-Aug-27 00:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 00:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.179 (still bad) 2008-Aug-27 00:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 00:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.178 (still bad) 2008-Aug-27 00:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 00:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:48:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:48:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.067 1.177 1.080 1.072 2008-Aug-27 00:48:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 1.001 1.052 0.970 2008-Aug-27 00:48:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.925 1.074 0.997 2008-Aug-27 00:48:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.035 0.109 2008-Aug-27 00:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.174 (still bad) 2008-Aug-27 00:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.169 (still bad) 2008-Aug-27 00:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:49:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:49:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.147 1.079 1.072 2008-Aug-27 00:49:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.978 1.037 0.959 2008-Aug-27 00:49:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.919 1.056 0.972 2008-Aug-27 00:49:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.035 0.109 2008-Aug-27 00:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 00:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:50:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:50:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.139 1.081 1.071 2008-Aug-27 00:50:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.985 1.042 0.968 2008-Aug-27 00:50:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 0.914 1.054 0.971 2008-Aug-27 00:50:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.034 0.109 2008-Aug-27 00:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:50:40 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 00:50:40.296 (seconds: 3040.296)!} 2008-Aug-27 00:50:40 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 00:50:40.296 (seconds: 3040.296)! 2008-Aug-27 00:50:41 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 3039.0 to 3040.0! 2008-Aug-27 00:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:50:42 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (3039.0 - 3041.0)! 2008-Aug-27 00:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 00:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 00:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 00:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 00:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.153 (still bad) 2008-Aug-27 00:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:51:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 00:51:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 00:51:21 LOG5 end_task: Level: (3) ID = <10089> Status = 0 0 0 0 ok 2008-Aug-27 00:51:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 00:51:21 LOG5 end_task: Level: (2) ID = <10088> Status = 0 0 0 0 ok 2008-Aug-27 00:51:21 LOG1 fixed_driftmap: New position: year = 2008.6571818199104 RA = 22:47:03.9 RA/Dec = 22:47:32.2 +04:18:24.6 2008-Aug-27 00:51:21 NOTE fixed_driftmap: Correcting ZA to 14:02:49.1 ... 2008-Aug-27 00:51:21 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0469799822 -CF 2008-Aug-27 00:51:21 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 00:51:21 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 00:51:21 LOG5 begin_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2008-Aug-27 00:51:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 00:51:21 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 00:51:21 LOG5 begin_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2008-Aug-27 00:51:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 00:51:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 00:51:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:51:21 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 00:51:21 LOG5 begin_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-Aug-27 00:51:21 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0469799822 -CF 2008-Aug-27 00:51:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:51:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 00:51:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 00:51:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:51:22 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 00:51:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 00:51:22 LOG5 end_task: Level: (4) ID = <10092> Status = 0 0 0 0 ok 2008-Aug-27 00:51:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 00:51:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 00:51:22 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 00:51:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 00:51:22 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Aug-27 00:51:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 00:51:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 00:51:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 00:51:22 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2008-Aug-27 00:51:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 00:51:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 00:51:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 00:51:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 00:51:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 00:51:22 LOG5 begin_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2008-Aug-27 00:51:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 00:51:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 00:51:22 LOG5 end_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2008-Aug-27 00:51:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 00:51:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 00:51:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 00:51:22 LOG5 end_task: Level: (3) ID = <10091> Status = 0 0 0 0 ok 2008-Aug-27 00:51:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 00:51:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 00:51:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 00:51:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 00:51:22 LOG5 begin_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Aug-27 00:51:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 00:51:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 00:51:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 00:51:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 00:51:22 LOG5 end_task: Level: (3) ID = <10095> Status = 0 0 0 0 ok 2008-Aug-27 00:51:22 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 00:51:22 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 00:51:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 00:51:22 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2008-Aug-27 00:51:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 00:51:22 INFO2 take_data: Starting WAPP scan: 824000010 2008-Aug-27 00:51:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 00:51:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 00:51:22 LOG5 begin_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Aug-27 00:51:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 00:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:51:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17483.00 2008-Aug-27 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:51:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:51:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 00:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.542 (still bad) 2008-Aug-27 00:51:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 00:51:24 LOG5 end_task: Level: (4) ID = <10097> Status = 0 0 0 0 ok 2008-Aug-27 00:51:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 00:51:24 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2008-Aug-27 00:51:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 00:51:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 00:51:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 00:51:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 00:51:24 LOG5 begin_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Aug-27 00:51:24 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 00:51:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 00:51:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 00:51:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 00:51:24 LOG5 end_task: Level: (3) ID = <10098> Status = 0 0 0 0 ok 2008-Aug-27 00:51:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 00:51:24 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 00:51:24 LOG5 finish_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2008-Aug-27 00:51:24 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 00:51:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 00:51:24 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 00:51:24 LOG5 end_task: Level: (2) ID = <10090> Status = 0 0 0 0 ok 2008-Aug-27 00:51:24 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2008-Aug-27 00:51:25 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2008-Aug-27 00:51:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:51:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:51:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:51:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 00:51:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 00:51:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 00:51:25 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 00:51:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 00:51:25 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2008-Aug-27 00:51:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 00:51:25 INFO2 take_data: Starting WAPP scan: 824000011 2008-Aug-27 00:51:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 00:51:25 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 00:51:25 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Aug-27 00:51:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 00:51:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 00:51:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17486.00 2008-Aug-27 00:51:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0004.fits 2008-Aug-27 00:51:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0004.fits} 2008-Aug-27 00:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.542 (still bad) 2008-Aug-27 00:51:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 00:51:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:51:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 00:51:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 00:51:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 00:51:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:51:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:51:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:51:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 00:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.153 (still bad) 2008-Aug-27 00:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:51:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:51:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.147 1.080 1.071 2008-Aug-27 00:51:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.988 1.045 0.968 2008-Aug-27 00:51:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 0.920 1.062 0.982 2008-Aug-27 00:51:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.953 0.098 1.040 0.109 2008-Aug-27 00:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.157 (still bad) 2008-Aug-27 00:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 00:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 00:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 00:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 00:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.155 (still bad) 2008-Aug-27 00:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.169 (still bad) 2008-Aug-27 00:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:52:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:52:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.144 1.083 1.072 2008-Aug-27 00:52:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.990 1.046 0.967 2008-Aug-27 00:52:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.922 1.067 0.987 2008-Aug-27 00:52:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.033 0.109 2008-Aug-27 00:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.171 (still bad) 2008-Aug-27 00:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 00:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.169 (still bad) 2008-Aug-27 00:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 00:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.168 (still bad) 2008-Aug-27 00:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 00:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.168 (still bad) 2008-Aug-27 00:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.171 (still bad) 2008-Aug-27 00:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 00:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:53:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:53:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.144 1.082 1.071 2008-Aug-27 00:53:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.989 1.051 0.967 2008-Aug-27 00:53:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 0.922 1.074 0.994 2008-Aug-27 00:53:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.034 0.109 2008-Aug-27 00:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.170 (still bad) 2008-Aug-27 00:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 00:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.165 (still bad) 2008-Aug-27 00:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 00:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-27 00:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.163 (still bad) 2008-Aug-27 00:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.164 (still bad) 2008-Aug-27 00:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:54:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:54:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.141 1.081 1.070 2008-Aug-27 00:54:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.988 1.049 0.964 2008-Aug-27 00:54:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.926 1.079 0.994 2008-Aug-27 00:54:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.034 0.109 2008-Aug-27 00:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.163 (still bad) 2008-Aug-27 00:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.161 (still bad) 2008-Aug-27 00:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.163 (still bad) 2008-Aug-27 00:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.170 (still bad) 2008-Aug-27 00:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.173 (still bad) 2008-Aug-27 00:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 00:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 00:55:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:55:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.149 1.080 1.069 2008-Aug-27 00:55:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.985 1.046 0.959 2008-Aug-27 00:55:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.072 0.923 1.072 0.983 2008-Aug-27 00:55:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.033 0.109 2008-Aug-27 00:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.183 (still bad) 2008-Aug-27 00:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 00:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 00:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:56:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:56:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.140 1.079 1.068 2008-Aug-27 00:56:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.983 1.044 0.958 2008-Aug-27 00:56:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.070 0.920 1.068 0.977 2008-Aug-27 00:56:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.034 0.109 2008-Aug-27 00:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 00:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.153 (still bad) 2008-Aug-27 00:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 00:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.153 (still bad) 2008-Aug-27 00:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.171 (still bad) 2008-Aug-27 00:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:57:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:57:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.066 1.169 1.076 1.065 2008-Aug-27 00:57:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 1.000 1.054 0.960 2008-Aug-27 00:57:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.928 1.083 0.999 2008-Aug-27 00:57:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.032 0.109 2008-Aug-27 00:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 00:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 00:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.164 (still bad) 2008-Aug-27 00:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.167 (still bad) 2008-Aug-27 00:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.168 (still bad) 2008-Aug-27 00:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.168 (still bad) 2008-Aug-27 00:58:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:58:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.145 1.077 1.068 2008-Aug-27 00:58:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.987 1.055 0.969 2008-Aug-27 00:58:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.923 1.070 1.000 2008-Aug-27 00:58:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.032 0.109 2008-Aug-27 00:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.164 (still bad) 2008-Aug-27 00:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 00:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 00:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 00:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.163 (still bad) 2008-Aug-27 00:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 00:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 00:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.166 (still bad) 2008-Aug-27 00:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 00:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 00:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 00:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.165 (still bad) 2008-Aug-27 00:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 00:59:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 00:59:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.142 1.078 1.068 2008-Aug-27 00:59:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.984 1.047 0.967 2008-Aug-27 00:59:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.922 1.070 0.987 2008-Aug-27 00:59:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.032 0.109 2008-Aug-27 00:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 00:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 00:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.158 (still bad) 2008-Aug-27 00:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 00:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 01:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.157 (still bad) 2008-Aug-27 01:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 01:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 01:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 01:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 01:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 01:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 01:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.155 (still bad) 2008-Aug-27 01:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 01:00:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:00:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.146 1.077 1.068 2008-Aug-27 01:00:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.981 1.045 0.967 2008-Aug-27 01:00:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.071 0.919 1.119 1.029 2008-Aug-27 01:00:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.033 0.109 2008-Aug-27 01:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 01:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 01:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.163 (still bad) 2008-Aug-27 01:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 01:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 01:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 01:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-27 01:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.170 (still bad) 2008-Aug-27 01:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.200 (still bad) 2008-Aug-27 01:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.183 (still bad) 2008-Aug-27 01:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.178 (still bad) 2008-Aug-27 01:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.172 (still bad) 2008-Aug-27 01:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-27 01:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 01:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.168 (still bad) 2008-Aug-27 01:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:01:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 01:01:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 01:01:26 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2008-Aug-27 01:01:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 01:01:26 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2008-Aug-27 01:01:26 LOG1 fixed_driftmap: New position: year = 2008.6572009912034 RA = 22:57:10.5 RA/Dec = 22:57:38.9 +04:18:27.1 2008-Aug-27 01:01:26 NOTE fixed_driftmap: Correcting ZA to 14:02:46.6 ... 2008-Aug-27 01:01:26 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0462769917 -CF 2008-Aug-27 01:01:26 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 01:01:26 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 01:01:26 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2008-Aug-27 01:01:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 01:01:26 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 01:01:26 LOG5 begin_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Aug-27 01:01:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 01:01:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 01:01:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 01:01:26 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 01:01:26 LOG5 begin_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Aug-27 01:01:26 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0462769917 -CF 2008-Aug-27 01:01:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:01:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 01:01:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 01:01:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:01:26 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 01:01:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 01:01:26 LOG5 end_task: Level: (4) ID = <10103> Status = 0 0 0 0 ok 2008-Aug-27 01:01:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 01:01:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 01:01:26 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 01:01:26 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 01:01:26 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Aug-27 01:01:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:01:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 01:01:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 01:01:27 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2008-Aug-27 01:01:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 01:01:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 01:01:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 01:01:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 01:01:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 01:01:27 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2008-Aug-27 01:01:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 01:01:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 01:01:27 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2008-Aug-27 01:01:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 01:01:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 01:01:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 01:01:27 LOG5 end_task: Level: (3) ID = <10102> Status = 0 0 0 0 ok 2008-Aug-27 01:01:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 01:01:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 01:01:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 01:01:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 01:01:27 LOG5 begin_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2008-Aug-27 01:01:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 01:01:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 01:01:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 01:01:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 01:01:27 LOG5 end_task: Level: (3) ID = <10106> Status = 0 0 0 0 ok 2008-Aug-27 01:01:27 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 01:01:27 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 01:01:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 01:01:27 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2008-Aug-27 01:01:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 01:01:27 INFO2 take_data: Starting WAPP scan: 824000012 2008-Aug-27 01:01:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 01:01:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 01:01:27 LOG5 begin_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Aug-27 01:01:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 01:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:01:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18088.00 2008-Aug-27 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.531 (still bad) 2008-Aug-27 01:01:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 01:01:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 01:01:29 LOG5 end_task: Level: (4) ID = <10108> Status = 0 0 0 0 ok 2008-Aug-27 01:01:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 01:01:29 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2008-Aug-27 01:01:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 01:01:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 01:01:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 01:01:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 01:01:29 LOG5 begin_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Aug-27 01:01:30 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 01:01:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 01:01:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 01:01:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 01:01:30 LOG5 end_task: Level: (3) ID = <10109> Status = 0 0 0 0 ok 2008-Aug-27 01:01:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 01:01:30 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 01:01:30 LOG5 finish_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2008-Aug-27 01:01:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 01:01:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 01:01:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 01:01:30 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2008-Aug-27 01:01:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2008-Aug-27 01:01:30 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2008-Aug-27 01:01:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:01:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:01:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:01:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:01:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 01:01:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 01:01:30 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 01:01:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 01:01:30 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Aug-27 01:01:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 01:01:30 INFO2 take_data: Starting WAPP scan: 824000013 2008-Aug-27 01:01:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 01:01:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 01:01:30 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Aug-27 01:01:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 01:01:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 01:01:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18091.00 2008-Aug-27 01:01:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0005.fits 2008-Aug-27 01:01:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0005.fits} 2008-Aug-27 01:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.531 (still bad) 2008-Aug-27 01:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 01:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 01:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 01:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 01:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.167 (still bad) 2008-Aug-27 01:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:01:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:01:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.140 1.079 1.067 2008-Aug-27 01:01:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.982 1.043 0.960 2008-Aug-27 01:01:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.069 0.916 1.058 0.972 2008-Aug-27 01:01:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.032 0.109 2008-Aug-27 01:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.167 (still bad) 2008-Aug-27 01:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.165 (still bad) 2008-Aug-27 01:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.158 (still bad) 2008-Aug-27 01:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:02:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:02:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 1.132 1.078 1.068 2008-Aug-27 01:02:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.975 1.037 0.951 2008-Aug-27 01:02:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.070 0.916 1.054 0.967 2008-Aug-27 01:02:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.031 0.109 2008-Aug-27 01:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:03:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:03:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.128 1.079 1.068 2008-Aug-27 01:03:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.975 1.039 0.948 2008-Aug-27 01:03:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.071 0.916 1.055 0.966 2008-Aug-27 01:03:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.033 0.109 2008-Aug-27 01:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 01:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.167 (still bad) 2008-Aug-27 01:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 01:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 01:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 01:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 01:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 01:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 01:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:04:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:04:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.127 1.080 1.068 2008-Aug-27 01:04:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.970 1.036 0.942 2008-Aug-27 01:04:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.921 1.050 0.961 2008-Aug-27 01:04:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.036 0.109 2008-Aug-27 01:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 01:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 01:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 01:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:05:39 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 01:05:39.297 (seconds: 3939.297)!} 2008-Aug-27 01:05:39 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 01:05:39.297 (seconds: 3939.297)! 2008-Aug-27 01:05:40 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 3938.0 to 3939.0! 2008-Aug-27 01:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:05:41 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (3938.0 - 3940.0)! 2008-Aug-27 01:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 01:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:05:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:05:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.137 1.079 1.066 2008-Aug-27 01:05:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.974 1.040 0.947 2008-Aug-27 01:05:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.918 1.053 0.964 2008-Aug-27 01:05:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.034 0.109 2008-Aug-27 01:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.097 and 1.128 (still bad) 2008-Aug-27 01:06:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:06:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.141 1.080 1.068 2008-Aug-27 01:06:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.974 1.042 0.956 2008-Aug-27 01:06:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.917 1.054 0.968 2008-Aug-27 01:06:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.098 1.042 0.109 2008-Aug-27 01:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 01:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 01:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 01:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 01:07:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:07:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 1.136 1.078 1.067 2008-Aug-27 01:07:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.986 1.045 0.965 2008-Aug-27 01:07:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 0.915 1.059 0.971 2008-Aug-27 01:07:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.035 0.109 2008-Aug-27 01:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 01:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 01:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 01:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 01:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 01:08:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:08:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.131 1.085 1.072 2008-Aug-27 01:08:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.977 1.046 0.963 2008-Aug-27 01:08:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.915 1.057 0.967 2008-Aug-27 01:08:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.035 0.109 2008-Aug-27 01:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:10:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:10:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.133 1.080 1.068 2008-Aug-27 01:10:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.977 1.046 0.964 2008-Aug-27 01:10:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.918 1.066 0.974 2008-Aug-27 01:10:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.036 0.109 2008-Aug-27 01:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 01:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 01:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 01:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 01:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.159 (still bad) 2008-Aug-27 01:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:11:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:11:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.131 1.082 1.070 2008-Aug-27 01:11:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.976 1.045 0.958 2008-Aug-27 01:11:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.918 1.056 0.967 2008-Aug-27 01:11:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.035 0.109 2008-Aug-27 01:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 01:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.155 (still bad) 2008-Aug-27 01:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:11:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 01:11:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 01:11:31 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2008-Aug-27 01:11:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 01:11:31 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2008-Aug-27 01:11:31 LOG1 fixed_driftmap: New position: year = 2008.6572201624965 RA = 23:07:17.2 RA/Dec = 23:07:45.6 +04:18:29.3 2008-Aug-27 01:11:31 NOTE fixed_driftmap: Correcting ZA to 14:02:44.4 ... 2008-Aug-27 01:11:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0456657352 -CF 2008-Aug-27 01:11:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 01:11:31 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 01:11:31 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2008-Aug-27 01:11:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 01:11:31 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 01:11:31 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Aug-27 01:11:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 01:11:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 01:11:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 01:11:31 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 01:11:31 LOG5 begin_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2008-Aug-27 01:11:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0456657352 -CF 2008-Aug-27 01:11:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:11:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 01:11:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 01:11:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:11:32 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 01:11:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 01:11:32 LOG5 end_task: Level: (4) ID = <10114> Status = 0 0 0 0 ok 2008-Aug-27 01:11:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 01:11:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 01:11:32 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 01:11:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 01:11:32 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Aug-27 01:11:32 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:11:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 01:11:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 01:11:32 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2008-Aug-27 01:11:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 01:11:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 01:11:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 01:11:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 01:11:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 01:11:32 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Aug-27 01:11:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 01:11:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 01:11:32 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2008-Aug-27 01:11:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 01:11:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 01:11:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 01:11:32 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2008-Aug-27 01:11:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 01:11:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 01:11:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 01:11:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 01:11:32 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2008-Aug-27 01:11:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 01:11:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 01:11:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 01:11:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 01:11:32 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2008-Aug-27 01:11:32 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 01:11:32 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 01:11:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 01:11:32 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Aug-27 01:11:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 01:11:32 INFO2 take_data: Starting WAPP scan: 824000014 2008-Aug-27 01:11:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 01:11:32 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 01:11:32 LOG5 begin_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Aug-27 01:11:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 01:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:11:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18693.00 2008-Aug-27 01:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 01:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 01:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 01:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:11:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 01:11:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 01:11:34 LOG5 end_task: Level: (4) ID = <10119> Status = 0 0 0 0 ok 2008-Aug-27 01:11:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 01:11:34 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2008-Aug-27 01:11:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 01:11:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 01:11:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 01:11:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 01:11:34 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2008-Aug-27 01:11:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 01:11:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 01:11:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 01:11:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 01:11:34 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2008-Aug-27 01:11:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 01:11:34 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 01:11:34 LOG5 finish_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2008-Aug-27 01:11:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 01:11:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 01:11:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 01:11:34 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2008-Aug-27 01:11:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2008-Aug-27 01:11:35 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2008-Aug-27 01:11:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:11:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:11:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:11:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:11:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 01:11:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 01:11:35 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 01:11:35 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 01:11:35 LOG5 begin_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Aug-27 01:11:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 01:11:35 INFO2 take_data: Starting WAPP scan: 824000015 2008-Aug-27 01:11:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 01:11:35 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 01:11:35 LOG5 begin_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2008-Aug-27 01:11:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 01:11:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.526 (still bad) 2008-Aug-27 01:11:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 01:11:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18696.00 2008-Aug-27 01:11:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0006.fits 2008-Aug-27 01:11:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0006.fits} 2008-Aug-27 01:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 01:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 01:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 01:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.526 (still bad) 2008-Aug-27 01:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.161 (still bad) 2008-Aug-27 01:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.162 (still bad) 2008-Aug-27 01:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:12:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:12:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.131 1.079 1.068 2008-Aug-27 01:12:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.974 1.055 0.966 2008-Aug-27 01:12:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.920 1.053 0.966 2008-Aug-27 01:12:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.036 0.109 2008-Aug-27 01:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-27 01:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.155 (still bad) 2008-Aug-27 01:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 01:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:13:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:13:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.134 1.087 1.074 2008-Aug-27 01:13:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.975 1.042 0.961 2008-Aug-27 01:13:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.916 1.055 0.966 2008-Aug-27 01:13:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.035 0.109 2008-Aug-27 01:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 01:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 01:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 01:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 01:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:14:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:14:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.131 1.077 1.069 2008-Aug-27 01:14:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.974 1.039 0.953 2008-Aug-27 01:14:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.919 1.055 0.966 2008-Aug-27 01:14:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.034 0.109 2008-Aug-27 01:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 01:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 01:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 01:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 01:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:15:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:15:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.139 1.079 1.068 2008-Aug-27 01:15:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.974 1.042 0.955 2008-Aug-27 01:15:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.917 1.052 0.966 2008-Aug-27 01:15:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.098 1.035 0.109 2008-Aug-27 01:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:15:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 01:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 01:16:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:16:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.137 1.079 1.069 2008-Aug-27 01:16:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.974 1.039 0.950 2008-Aug-27 01:16:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 0.917 1.051 0.964 2008-Aug-27 01:16:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.034 0.109 2008-Aug-27 01:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 01:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:17:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:17:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.138 1.080 1.069 2008-Aug-27 01:17:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.974 1.044 0.961 2008-Aug-27 01:17:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.916 1.052 0.967 2008-Aug-27 01:17:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.971 0.098 1.059 0.109 2008-Aug-27 01:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 01:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:18:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:18:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.128 1.081 1.069 2008-Aug-27 01:18:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.971 1.041 0.951 2008-Aug-27 01:18:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.917 1.047 0.963 2008-Aug-27 01:18:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.969 0.098 1.055 0.109 2008-Aug-27 01:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 01:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:18:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:18:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 01:18:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:18:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:18:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:18:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:18:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 01:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 01:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 01:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:19:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:19:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.131 1.088 1.078 2008-Aug-27 01:19:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.971 1.036 0.946 2008-Aug-27 01:19:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 0.917 1.043 0.959 2008-Aug-27 01:19:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.952 0.098 1.036 0.109 2008-Aug-27 01:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:20:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:20:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:20:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:20:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:20:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.129 1.079 1.067 2008-Aug-27 01:20:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.968 1.037 0.943 2008-Aug-27 01:20:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.933 1.055 0.969 2008-Aug-27 01:20:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.036 0.109 2008-Aug-27 01:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.173 (still bad) 2008-Aug-27 01:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.223 (still bad) 2008-Aug-27 01:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.264 (still bad) 2008-Aug-27 01:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.285 (still bad) 2008-Aug-27 01:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.282 (still bad) 2008-Aug-27 01:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.262 (still bad) 2008-Aug-27 01:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.233 (still bad) 2008-Aug-27 01:20:38 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 01:20:38.298 (seconds: 4838.298)!} 2008-Aug-27 01:20:38 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 01:20:38.298 (seconds: 4838.298)! 2008-Aug-27 01:20:39 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 4837.0 to 4838.0! 2008-Aug-27 01:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.205 (still bad) 2008-Aug-27 01:20:40 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (4837.0 - 4839.0)! 2008-Aug-27 01:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.185 (still bad) 2008-Aug-27 01:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.165 (still bad) 2008-Aug-27 01:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 01:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.176 (still bad) 2008-Aug-27 01:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.208 (still bad) 2008-Aug-27 01:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.231 (still bad) 2008-Aug-27 01:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.234 (still bad) 2008-Aug-27 01:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.213 (still bad) 2008-Aug-27 01:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.173 (still bad) 2008-Aug-27 01:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 01:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 01:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 01:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 01:21:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:21:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.128 1.081 1.068 2008-Aug-27 01:21:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.964 1.148 1.035 2008-Aug-27 01:21:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.929 1.046 0.958 2008-Aug-27 01:21:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.035 0.109 2008-Aug-27 01:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.155 (still bad) 2008-Aug-27 01:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:21:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:21:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.158 (still bad) 2008-Aug-27 01:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:21:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 01:21:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 01:21:36 LOG5 end_task: Level: (3) ID = <10122> Status = 0 0 0 0 ok 2008-Aug-27 01:21:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 01:21:36 LOG5 end_task: Level: (2) ID = <10121> Status = 0 0 0 0 ok 2008-Aug-27 01:21:36 LOG1 fixed_driftmap: New position: year = 2008.6572393337897 RA = 23:17:23.8 RA/Dec = 23:17:52.2 +04:18:31.2 2008-Aug-27 01:21:36 NOTE fixed_driftmap: Correcting ZA to 14:02:42.5 ... 2008-Aug-27 01:21:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0451474061 -CF 2008-Aug-27 01:21:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 01:21:36 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 01:21:36 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Aug-27 01:21:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 01:21:36 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 01:21:36 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2008-Aug-27 01:21:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 01:21:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 01:21:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 01:21:36 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 01:21:36 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2008-Aug-27 01:21:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0451474061 -CF 2008-Aug-27 01:21:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:21:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 01:21:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 01:21:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:21:36 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 01:21:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 01:21:36 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2008-Aug-27 01:21:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 01:21:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 01:21:36 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 01:21:36 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 01:21:36 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Aug-27 01:21:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:21:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 01:21:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 01:21:37 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2008-Aug-27 01:21:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 01:21:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 01:21:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 01:21:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 01:21:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 01:21:37 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Aug-27 01:21:37 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 01:21:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 01:21:37 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2008-Aug-27 01:21:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 01:21:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 01:21:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 01:21:37 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2008-Aug-27 01:21:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 01:21:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 01:21:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 01:21:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 01:21:37 LOG5 begin_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Aug-27 01:21:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 01:21:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 01:21:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 01:21:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 01:21:37 LOG5 end_task: Level: (3) ID = <10128> Status = 0 0 0 0 ok 2008-Aug-27 01:21:37 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 01:21:37 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 01:21:37 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 01:21:37 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Aug-27 01:21:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 01:21:37 INFO2 take_data: Starting WAPP scan: 824000016 2008-Aug-27 01:21:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 01:21:37 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 01:21:37 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2008-Aug-27 01:21:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 01:21:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19298.00 2008-Aug-27 01:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 01:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 01:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 01:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:21:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 01:21:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 01:21:39 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2008-Aug-27 01:21:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 01:21:39 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2008-Aug-27 01:21:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 01:21:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 01:21:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 01:21:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 01:21:39 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Aug-27 01:21:40 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 01:21:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 01:21:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 01:21:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 01:21:40 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2008-Aug-27 01:21:40 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 01:21:40 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 01:21:40 LOG5 finish_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Aug-27 01:21:40 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 01:21:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 01:21:40 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 01:21:40 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2008-Aug-27 01:21:40 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2008-Aug-27 01:21:40 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2008-Aug-27 01:21:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:21:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:21:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:21:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:21:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 01:21:40 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 01:21:40 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 01:21:40 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 01:21:40 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-Aug-27 01:21:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 01:21:40 INFO2 take_data: Starting WAPP scan: 824000017 2008-Aug-27 01:21:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 01:21:40 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 01:21:40 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2008-Aug-27 01:21:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 01:21:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 01:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.520 (still bad) 2008-Aug-27 01:21:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19301.00 2008-Aug-27 01:21:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0007.fits 2008-Aug-27 01:21:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0007.fits} 2008-Aug-27 01:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 01:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 01:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 01:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.492 (still bad) 2008-Aug-27 01:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.153 (still bad) 2008-Aug-27 01:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:22:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:22:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.129 1.079 1.068 2008-Aug-27 01:22:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.965 1.040 0.945 2008-Aug-27 01:22:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 0.917 1.045 0.957 2008-Aug-27 01:22:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.036 0.109 2008-Aug-27 01:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.153 (still bad) 2008-Aug-27 01:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:22:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:22:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:22:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.155 (still bad) 2008-Aug-27 01:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 01:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.153 (still bad) 2008-Aug-27 01:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:23:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:23:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.127 1.082 1.070 2008-Aug-27 01:23:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.964 1.039 0.942 2008-Aug-27 01:23:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.917 1.045 0.955 2008-Aug-27 01:23:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.036 0.109 2008-Aug-27 01:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 01:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 01:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 01:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:23:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 01:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:24:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:24:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.127 1.079 1.070 2008-Aug-27 01:24:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.965 1.039 0.942 2008-Aug-27 01:24:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.915 1.045 0.955 2008-Aug-27 01:24:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.959 0.098 1.046 0.109 2008-Aug-27 01:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:25:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:25:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.127 1.079 1.069 2008-Aug-27 01:25:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.968 1.039 0.943 2008-Aug-27 01:25:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.920 1.045 0.956 2008-Aug-27 01:25:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.035 0.109 2008-Aug-27 01:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 01:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 01:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 01:26:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:26:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.136 1.079 1.071 2008-Aug-27 01:26:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.963 1.038 0.946 2008-Aug-27 01:26:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.917 1.047 0.956 2008-Aug-27 01:26:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.098 1.039 0.109 2008-Aug-27 01:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 01:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 01:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 01:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:27:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 01:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 01:27:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:27:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.134 1.080 1.070 2008-Aug-27 01:27:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.965 1.039 0.946 2008-Aug-27 01:27:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.915 1.045 0.953 2008-Aug-27 01:27:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.035 0.109 2008-Aug-27 01:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 01:28:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:28:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.131 1.094 1.086 2008-Aug-27 01:28:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.963 1.038 0.945 2008-Aug-27 01:28:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.916 1.047 0.954 2008-Aug-27 01:28:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.034 0.109 2008-Aug-27 01:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 01:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 01:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:29:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:29:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.127 1.079 1.071 2008-Aug-27 01:29:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.962 1.040 0.944 2008-Aug-27 01:29:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.917 1.042 0.954 2008-Aug-27 01:29:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.035 0.109 2008-Aug-27 01:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:30:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:30:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.128 1.077 1.069 2008-Aug-27 01:30:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.965 1.041 0.945 2008-Aug-27 01:30:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.918 1.046 0.957 2008-Aug-27 01:30:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.036 0.109 2008-Aug-27 01:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.155 (still bad) 2008-Aug-27 01:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 01:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 01:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.162 (still bad) 2008-Aug-27 01:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:31:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:31:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.133 1.087 1.077 2008-Aug-27 01:31:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.965 1.046 0.953 2008-Aug-27 01:31:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.918 1.050 0.960 2008-Aug-27 01:31:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.037 0.109 2008-Aug-27 01:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-27 01:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:31:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 01:31:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 01:31:41 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2008-Aug-27 01:31:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 01:31:41 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2008-Aug-27 01:31:41 LOG1 fixed_driftmap: New position: year = 2008.6572585050828 RA = 23:27:30.4 RA/Dec = 23:27:58.9 +04:18:32.7 2008-Aug-27 01:31:41 NOTE fixed_driftmap: Correcting ZA to 14:02:41.0 ... 2008-Aug-27 01:31:41 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0447230099 -CF 2008-Aug-27 01:31:41 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 01:31:41 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 01:31:41 LOG5 begin_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2008-Aug-27 01:31:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 01:31:41 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 01:31:41 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Aug-27 01:31:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 01:31:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 01:31:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 01:31:41 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 01:31:41 LOG5 begin_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Aug-27 01:31:41 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0447230099 -CF 2008-Aug-27 01:31:41 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:31:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 01:31:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 01:31:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:31:42 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 01:31:42 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 01:31:42 LOG5 end_task: Level: (4) ID = <10136> Status = 0 0 0 0 ok 2008-Aug-27 01:31:42 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 01:31:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 01:31:42 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 01:31:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 01:31:42 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Aug-27 01:31:42 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:31:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 01:31:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 01:31:42 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2008-Aug-27 01:31:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 01:31:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 01:31:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 01:31:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 01:31:42 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 01:31:42 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Aug-27 01:31:42 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 01:31:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 01:31:42 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2008-Aug-27 01:31:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 01:31:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 01:31:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 01:31:42 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2008-Aug-27 01:31:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 01:31:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 01:31:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 01:31:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 01:31:42 LOG5 begin_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Aug-27 01:31:42 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 01:31:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 01:31:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 01:31:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 01:31:42 LOG5 end_task: Level: (3) ID = <10139> Status = 0 0 0 0 ok 2008-Aug-27 01:31:42 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 01:31:42 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 01:31:42 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 01:31:42 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Aug-27 01:31:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 01:31:42 INFO2 take_data: Starting WAPP scan: 824000018 2008-Aug-27 01:31:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 01:31:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 01:31:42 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Aug-27 01:31:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 01:31:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19903.00 2008-Aug-27 01:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 01:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 01:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 01:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:31:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 01:31:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 01:31:44 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2008-Aug-27 01:31:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 01:31:44 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2008-Aug-27 01:31:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 01:31:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 01:31:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 01:31:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 01:31:44 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2008-Aug-27 01:31:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 01:31:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 01:31:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 01:31:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 01:31:44 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2008-Aug-27 01:31:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 01:31:44 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 01:31:44 LOG5 finish_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2008-Aug-27 01:31:44 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 01:31:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 01:31:44 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 01:31:44 LOG5 end_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2008-Aug-27 01:31:45 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2008-Aug-27 01:31:45 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2008-Aug-27 01:31:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:31:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:31:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:31:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:31:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 01:31:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 01:31:45 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 01:31:45 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 01:31:45 LOG5 begin_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2008-Aug-27 01:31:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 01:31:45 INFO2 take_data: Starting WAPP scan: 824000019 2008-Aug-27 01:31:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 01:31:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 01:31:45 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Aug-27 01:31:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 01:31:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 01:31:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19906.00 2008-Aug-27 01:31:45 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0008.fits 2008-Aug-27 01:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.520 (still bad) 2008-Aug-27 01:31:45 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0008.fits} 2008-Aug-27 01:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 01:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 01:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 01:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:32:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:32:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:32:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:32:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:32:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:32:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:32:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:32:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:32:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.130 1.077 1.067 2008-Aug-27 01:32:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.964 1.048 0.952 2008-Aug-27 01:32:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.920 1.049 0.958 2008-Aug-27 01:32:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.037 0.109 2008-Aug-27 01:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 01:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.159 (still bad) 2008-Aug-27 01:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.162 (still bad) 2008-Aug-27 01:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.161 (still bad) 2008-Aug-27 01:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.159 (still bad) 2008-Aug-27 01:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:33:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:33:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.126 1.081 1.069 2008-Aug-27 01:33:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.972 1.049 0.960 2008-Aug-27 01:33:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.917 1.051 0.957 2008-Aug-27 01:33:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.952 0.098 1.039 0.109 2008-Aug-27 01:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 01:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:33:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 01:33:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:33:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 01:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:34:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:34:24 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 54705.232199 to 54705.232211! 2008-Aug-27 01:34:25 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (54705.232199 - 54705.232222)! 2008-Aug-27 01:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:34:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:34:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.128 1.079 1.066 2008-Aug-27 01:34:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.966 1.046 0.951 2008-Aug-27 01:34:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.917 1.051 0.956 2008-Aug-27 01:34:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.036 0.109 2008-Aug-27 01:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 01:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 01:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:35:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:35:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.129 1.079 1.066 2008-Aug-27 01:35:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.968 1.046 0.957 2008-Aug-27 01:35:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.918 1.051 0.963 2008-Aug-27 01:35:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.034 0.109 2008-Aug-27 01:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:35:37 LOG4 exec_msg: From SCRAMWAPPDATA: log_message WARNING WAPPDATA-queue_agcdata {WARNING received duplicate AGC-datablock at 01:35:37.299 (seconds: 5737.299)!} 2008-Aug-27 01:35:37 WARNING WAPPDATA-queue_agcdata: WARNING received duplicate AGC-datablock at 01:35:37.299 (seconds: 5737.299)! 2008-Aug-27 01:35:38 WARNING WAPPDATA-search_agc: WARNING extrapolating agc-data from 5736.0 to 5737.0! 2008-Aug-27 01:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:35:39 WARNING WAPPDATA-search_agc: WARNING interpolating agc-data over 2.00 second time gap (5736.0 - 5738.0)! 2008-Aug-27 01:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 01:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 01:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:36:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:36:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.150 1.080 1.066 2008-Aug-27 01:36:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.976 1.046 0.952 2008-Aug-27 01:36:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.917 1.054 0.963 2008-Aug-27 01:36:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.035 0.109 2008-Aug-27 01:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 01:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 01:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 01:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 01:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 01:37:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:37:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.129 1.079 1.066 2008-Aug-27 01:37:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.965 1.045 0.954 2008-Aug-27 01:37:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.916 1.056 0.965 2008-Aug-27 01:37:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.034 0.109 2008-Aug-27 01:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 01:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 01:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 01:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.155 (still bad) 2008-Aug-27 01:38:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:38:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.141 1.078 1.066 2008-Aug-27 01:38:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.974 1.051 0.969 2008-Aug-27 01:38:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.916 1.056 0.970 2008-Aug-27 01:38:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.034 0.109 2008-Aug-27 01:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.155 (still bad) 2008-Aug-27 01:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.155 (still bad) 2008-Aug-27 01:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:39:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:39:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.136 1.078 1.063 2008-Aug-27 01:39:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.973 1.046 0.962 2008-Aug-27 01:39:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.916 1.054 0.966 2008-Aug-27 01:39:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.033 0.109 2008-Aug-27 01:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:40:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:40:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.128 1.078 1.066 2008-Aug-27 01:40:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.969 1.041 0.952 2008-Aug-27 01:40:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.914 1.056 0.968 2008-Aug-27 01:40:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.098 1.037 0.109 2008-Aug-27 01:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 01:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 01:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.174 (still bad) 2008-Aug-27 01:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.210 (still bad) 2008-Aug-27 01:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.229 (still bad) 2008-Aug-27 01:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.239 (still bad) 2008-Aug-27 01:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.240 (still bad) 2008-Aug-27 01:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.225 (still bad) 2008-Aug-27 01:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.200 (still bad) 2008-Aug-27 01:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.183 (still bad) 2008-Aug-27 01:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.157 (still bad) 2008-Aug-27 01:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 01:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:41:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:41:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.132 1.079 1.067 2008-Aug-27 01:41:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 1.033 1.041 0.949 2008-Aug-27 01:41:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.918 1.047 0.958 2008-Aug-27 01:41:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.032 0.109 2008-Aug-27 01:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:41:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 01:41:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 01:41:46 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2008-Aug-27 01:41:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 01:41:46 LOG5 end_task: Level: (2) ID = <10143> Status = 0 0 0 0 ok 2008-Aug-27 01:41:46 LOG1 fixed_driftmap: New position: year = 2008.657277676376 RA = 23:37:37.1 RA/Dec = 23:38:05.5 +04:18:33.9 2008-Aug-27 01:41:46 NOTE fixed_driftmap: Correcting ZA to 14:02:39.8 ... 2008-Aug-27 01:41:46 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0443933736 -CF 2008-Aug-27 01:41:46 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 01:41:46 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 01:41:46 LOG5 begin_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2008-Aug-27 01:41:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 01:41:46 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 01:41:46 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2008-Aug-27 01:41:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 01:41:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 01:41:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 01:41:46 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 01:41:46 LOG5 begin_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Aug-27 01:41:46 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0443933736 -CF 2008-Aug-27 01:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:41:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:41:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 01:41:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 01:41:46 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:41:46 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 01:41:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 01:41:46 LOG5 end_task: Level: (4) ID = <10147> Status = 0 0 0 0 ok 2008-Aug-27 01:41:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 01:41:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 01:41:46 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 01:41:46 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 01:41:46 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Aug-27 01:41:47 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:41:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 01:41:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 01:41:47 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2008-Aug-27 01:41:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 01:41:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 01:41:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 01:41:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 01:41:47 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 01:41:47 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Aug-27 01:41:47 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 01:41:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 01:41:47 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2008-Aug-27 01:41:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 01:41:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 01:41:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 01:41:47 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2008-Aug-27 01:41:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 01:41:47 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 01:41:47 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 01:41:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 01:41:47 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2008-Aug-27 01:41:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 01:41:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 01:41:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 01:41:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 01:41:47 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2008-Aug-27 01:41:47 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 01:41:47 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 01:41:47 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 01:41:47 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Aug-27 01:41:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 01:41:47 INFO2 take_data: Starting WAPP scan: 824000020 2008-Aug-27 01:41:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 01:41:47 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 01:41:47 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Aug-27 01:41:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 01:41:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20508.00 2008-Aug-27 01:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 01:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 01:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 01:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:41:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 01:41:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 01:41:49 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2008-Aug-27 01:41:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 01:41:49 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2008-Aug-27 01:41:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 01:41:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 01:41:49 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 01:41:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 01:41:49 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-Aug-27 01:41:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 01:41:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 01:41:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 01:41:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 01:41:49 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2008-Aug-27 01:41:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 01:41:49 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 01:41:49 LOG5 finish_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2008-Aug-27 01:41:49 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 01:41:49 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 01:41:49 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 01:41:49 LOG5 end_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2008-Aug-27 01:41:49 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2008-Aug-27 01:41:49 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2008-Aug-27 01:41:49 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:41:49 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:41:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:41:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:41:50 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 01:41:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 01:41:50 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 01:41:50 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 01:41:50 LOG5 begin_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-Aug-27 01:41:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 01:41:50 INFO2 take_data: Starting WAPP scan: 824000021 2008-Aug-27 01:41:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 01:41:50 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 01:41:50 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Aug-27 01:41:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 01:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.523 (still bad) 2008-Aug-27 01:41:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 01:41:50 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0009.fits 2008-Aug-27 01:41:50 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0009.fits} 2008-Aug-27 01:41:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20511.00 2008-Aug-27 01:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 01:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 01:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 01:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.523 (still bad) 2008-Aug-27 01:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 01:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 01:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:42:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:42:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.124 1.079 1.066 2008-Aug-27 01:42:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.962 1.040 0.943 2008-Aug-27 01:42:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.914 1.048 0.956 2008-Aug-27 01:42:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.035 0.109 2008-Aug-27 01:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:42:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:42:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 01:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:43:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:43:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.125 1.077 1.064 2008-Aug-27 01:43:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.973 1.039 0.941 2008-Aug-27 01:43:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.914 1.046 0.956 2008-Aug-27 01:43:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.034 0.109 2008-Aug-27 01:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 01:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 01:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 01:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 01:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 01:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.159 (still bad) 2008-Aug-27 01:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 01:44:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 01:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:44:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:44:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:44:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:44:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:44:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:44:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.125 1.078 1.065 2008-Aug-27 01:44:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.961 1.037 0.939 2008-Aug-27 01:44:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.912 1.044 0.952 2008-Aug-27 01:44:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.034 0.109 2008-Aug-27 01:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 01:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:45:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:45:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:45:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:45:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:45:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:45:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.142 1.080 1.066 2008-Aug-27 01:45:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.964 1.040 0.946 2008-Aug-27 01:45:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.915 1.049 0.956 2008-Aug-27 01:45:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.034 0.109 2008-Aug-27 01:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 01:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 01:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-27 01:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.158 (still bad) 2008-Aug-27 01:46:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:46:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.126 1.084 1.068 2008-Aug-27 01:46:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.959 1.043 0.944 2008-Aug-27 01:46:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.142 0.968 1.044 0.951 2008-Aug-27 01:46:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.033 0.109 2008-Aug-27 01:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 01:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 01:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:47:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:47:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.124 1.078 1.064 2008-Aug-27 01:47:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.954 1.037 0.937 2008-Aug-27 01:47:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.912 1.064 0.969 2008-Aug-27 01:47:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.036 0.109 2008-Aug-27 01:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 01:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 01:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 01:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.172 (still bad) 2008-Aug-27 01:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.162 (still bad) 2008-Aug-27 01:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 01:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-27 01:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.169 (still bad) 2008-Aug-27 01:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.173 (still bad) 2008-Aug-27 01:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.172 (still bad) 2008-Aug-27 01:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.193 (still bad) 2008-Aug-27 01:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.162 (still bad) 2008-Aug-27 01:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 01:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:48:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:48:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.127 1.081 1.066 2008-Aug-27 01:48:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.970 1.040 0.942 2008-Aug-27 01:48:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.915 1.046 0.950 2008-Aug-27 01:48:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.034 0.109 2008-Aug-27 01:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 01:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 01:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:49:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:49:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.121 1.079 1.066 2008-Aug-27 01:49:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.958 1.044 0.942 2008-Aug-27 01:49:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.913 1.050 0.952 2008-Aug-27 01:49:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.032 0.109 2008-Aug-27 01:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 01:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 01:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:50:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:50:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.124 1.077 1.064 2008-Aug-27 01:50:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.960 1.041 0.943 2008-Aug-27 01:50:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.914 1.054 0.955 2008-Aug-27 01:50:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.034 0.109 2008-Aug-27 01:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 01:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 01:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 01:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 01:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 01:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 01:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:51:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 01:51:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 01:51:51 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2008-Aug-27 01:51:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 01:51:51 LOG5 end_task: Level: (2) ID = <10154> Status = 0 0 0 0 ok 2008-Aug-27 01:51:51 LOG1 fixed_driftmap: New position: year = 2008.6572968476692 RA = 23:47:43.7 RA/Dec = 23:48:12.2 +04:18:34.7 2008-Aug-27 01:51:51 NOTE fixed_driftmap: Correcting ZA to 14:02:39.0 ... 2008-Aug-27 01:51:51 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0441591408 -CF 2008-Aug-27 01:51:51 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 01:51:51 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 01:51:51 LOG5 begin_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2008-Aug-27 01:51:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 01:51:51 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 01:51:51 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2008-Aug-27 01:51:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 01:51:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 01:51:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 01:51:51 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 01:51:51 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Aug-27 01:51:51 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0441591408 -CF 2008-Aug-27 01:51:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:51:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 01:51:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 01:51:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:51:51 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 01:51:51 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 01:51:51 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2008-Aug-27 01:51:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 01:51:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 01:51:51 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 01:51:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 01:51:51 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2008-Aug-27 01:51:51 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 01:51:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 01:51:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 01:51:52 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2008-Aug-27 01:51:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 01:51:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 01:51:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 01:51:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 01:51:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 01:51:52 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Aug-27 01:51:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 01:51:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 01:51:52 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2008-Aug-27 01:51:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 01:51:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 01:51:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 01:51:52 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2008-Aug-27 01:51:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 01:51:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 01:51:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 01:51:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 01:51:52 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2008-Aug-27 01:51:52 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 01:51:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 01:51:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 01:51:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 01:51:52 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2008-Aug-27 01:51:52 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 01:51:52 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 01:51:52 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 01:51:52 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Aug-27 01:51:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 01:51:52 INFO2 take_data: Starting WAPP scan: 824000022 2008-Aug-27 01:51:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 01:51:52 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 01:51:52 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Aug-27 01:51:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 01:51:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21113.00 2008-Aug-27 01:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 01:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 01:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 01:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:51:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 01:51:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 01:51:54 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2008-Aug-27 01:51:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 01:51:54 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2008-Aug-27 01:51:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 01:51:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 01:51:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 01:51:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 01:51:54 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Aug-27 01:51:55 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 01:51:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 01:51:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 01:51:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 01:51:55 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2008-Aug-27 01:51:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 01:51:55 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 01:51:55 LOG5 finish_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2008-Aug-27 01:51:55 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 01:51:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 01:51:55 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 01:51:55 LOG5 end_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2008-Aug-27 01:51:55 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2008-Aug-27 01:51:55 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2008-Aug-27 01:51:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:51:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:51:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:51:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 01:51:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 01:51:55 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 01:51:55 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 01:51:55 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 01:51:55 LOG5 begin_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2008-Aug-27 01:51:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 01:51:55 INFO2 take_data: Starting WAPP scan: 824000023 2008-Aug-27 01:51:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 01:51:55 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 01:51:55 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Aug-27 01:51:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 01:51:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 01:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.521 (still bad) 2008-Aug-27 01:51:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21116.00 2008-Aug-27 01:51:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0010.fits 2008-Aug-27 01:51:55 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0010.fits} 2008-Aug-27 01:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 01:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 01:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 01:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 01:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 01:51:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 01:51:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.477 1.521 1.440 1.425 2008-Aug-27 01:51:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.271 1.308 1.445 1.301 2008-Aug-27 01:51:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.515 1.291 1.455 1.263 2008-Aug-27 01:51:57 LOG4 check_wapp_levels: WAPP-4 power levels: 1.316 0.099 1.436 0.110 2008-Aug-27 01:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 01:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.167 (still bad) 2008-Aug-27 01:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.180 (still bad) 2008-Aug-27 01:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.175 (still bad) 2008-Aug-27 01:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.153 (still bad) 2008-Aug-27 01:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 01:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 01:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 01:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 01:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:52:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:52:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.124 1.078 1.064 2008-Aug-27 01:52:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.964 1.046 0.950 2008-Aug-27 01:52:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.915 1.051 0.954 2008-Aug-27 01:52:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.032 0.109 2008-Aug-27 01:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 01:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 01:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 01:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:53:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 01:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 01:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:54:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:54:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.135 1.077 1.061 2008-Aug-27 01:54:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.964 1.042 0.945 2008-Aug-27 01:54:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.914 1.049 0.955 2008-Aug-27 01:54:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.033 0.109 2008-Aug-27 01:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 01:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 01:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 01:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 01:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.915 (still bad) 2008-Aug-27 01:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 2.009 (still bad) 2008-Aug-27 01:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.302 (still bad) 2008-Aug-27 01:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:55:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:55:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.150 1.068 1.047 2008-Aug-27 01:55:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.877 0.938 1.047 0.946 2008-Aug-27 01:55:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.915 1.054 0.955 2008-Aug-27 01:55:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.031 0.109 2008-Aug-27 01:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 01:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:55:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 01:55:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 01:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 01:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 01:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 01:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 01:56:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:56:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.068 1.129 1.076 1.063 2008-Aug-27 01:56:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 0.963 1.046 0.950 2008-Aug-27 01:56:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.913 1.051 0.954 2008-Aug-27 01:56:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.030 0.109 2008-Aug-27 01:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 01:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 01:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 01:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 01:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 01:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:57:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:57:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 1.129 1.076 1.061 2008-Aug-27 01:57:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.964 1.044 0.950 2008-Aug-27 01:57:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.912 1.051 0.954 2008-Aug-27 01:57:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.031 0.109 2008-Aug-27 01:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 01:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 01:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 01:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:58:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:58:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.125 1.075 1.061 2008-Aug-27 01:58:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.962 1.043 0.947 2008-Aug-27 01:58:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.912 1.050 0.952 2008-Aug-27 01:58:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.036 0.109 2008-Aug-27 01:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 01:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 01:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 01:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 01:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 01:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 01:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 01:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 01:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 01:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 01:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 01:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 01:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 01:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 01:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 01:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:59:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 01:59:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 1.121 1.076 1.062 2008-Aug-27 01:59:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.956 1.040 0.942 2008-Aug-27 01:59:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.911 1.047 0.949 2008-Aug-27 01:59:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.031 0.109 2008-Aug-27 01:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 01:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 01:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 01:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 01:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 01:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 01:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 01:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 01:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 01:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 01:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 01:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 01:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 01:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 01:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 01:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 01:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:00:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:00:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.126 1.079 1.064 2008-Aug-27 02:00:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.961 1.041 0.944 2008-Aug-27 02:00:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.912 1.049 0.950 2008-Aug-27 02:00:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.031 0.109 2008-Aug-27 02:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 02:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 02:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 02:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 02:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 02:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:01:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:01:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.140 1.079 1.062 2008-Aug-27 02:01:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.972 1.050 0.965 2008-Aug-27 02:01:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.919 1.063 0.972 2008-Aug-27 02:01:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.968 0.098 1.053 0.109 2008-Aug-27 02:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 02:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.163 (still bad) 2008-Aug-27 02:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.158 (still bad) 2008-Aug-27 02:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.161 (still bad) 2008-Aug-27 02:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.161 (still bad) 2008-Aug-27 02:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.157 (still bad) 2008-Aug-27 02:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 02:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.157 (still bad) 2008-Aug-27 02:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 02:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 02:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 02:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:01:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 02:01:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 02:01:56 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2008-Aug-27 02:01:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 02:01:56 LOG5 end_task: Level: (2) ID = <10165> Status = 0 0 0 0 ok 2008-Aug-27 02:01:56 LOG1 fixed_driftmap: New position: year = 2008.6573160189623 RA = 23:57:50.4 RA/Dec = 23:58:18.9 +04:18:35.2 2008-Aug-27 02:01:56 NOTE fixed_driftmap: Correcting ZA to 14:02:38.5 ... 2008-Aug-27 02:01:56 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0440207667 -CF 2008-Aug-27 02:01:56 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 02:01:56 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 02:01:56 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Aug-27 02:01:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 02:01:56 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 02:01:56 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Aug-27 02:01:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 02:01:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 02:01:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 02:01:56 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 02:01:56 LOG5 begin_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-Aug-27 02:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Aug-27 02:01:56 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0440207667 -CF 2008-Aug-27 02:01:56 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 02:01:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 02:01:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 02:01:56 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Aug-27 02:01:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 02:01:56 LOG5 end_task: Level: (4) ID = <10169> Status = 0 0 0 0 ok 2008-Aug-27 02:01:57 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 02:01:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 02:01:57 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 02:01:57 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 02:01:57 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Aug-27 02:01:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 02:01:57 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 02:01:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 02:01:57 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2008-Aug-27 02:01:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 02:01:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 02:01:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 02:01:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 02:01:57 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 02:01:57 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2008-Aug-27 02:01:57 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 02:01:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 02:01:57 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2008-Aug-27 02:01:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 02:01:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 02:01:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 02:01:57 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2008-Aug-27 02:01:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 02:01:57 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 02:01:57 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 02:01:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 02:01:57 LOG5 begin_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2008-Aug-27 02:01:57 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 02:01:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 02:01:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 02:01:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 02:01:57 LOG5 end_task: Level: (3) ID = <10172> Status = 0 0 0 0 ok 2008-Aug-27 02:01:57 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 02:01:57 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 02:01:57 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 02:01:57 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Aug-27 02:01:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 02:01:57 INFO2 take_data: Starting WAPP scan: 824000024 2008-Aug-27 02:01:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 02:01:57 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 02:01:57 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2008-Aug-27 02:01:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 02:01:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21718.00 2008-Aug-27 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:01:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 02:01:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 02:01:59 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2008-Aug-27 02:01:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 02:01:59 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2008-Aug-27 02:01:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 02:01:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 02:01:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 02:01:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 02:01:59 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Aug-27 02:01:59 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 02:01:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 02:01:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 02:01:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 02:01:59 LOG5 end_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2008-Aug-27 02:01:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 02:01:59 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 02:01:59 LOG5 finish_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Aug-27 02:01:59 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 02:01:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 02:01:59 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 02:01:59 LOG5 end_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2008-Aug-27 02:01:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2008-Aug-27 02:01:59 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2008-Aug-27 02:01:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:01:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:02:00 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:02:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:02:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 02:02:00 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 02:02:00 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 02:02:00 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 02:02:00 LOG5 begin_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2008-Aug-27 02:02:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 02:02:00 INFO2 take_data: Starting WAPP scan: 824000025 2008-Aug-27 02:02:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 02:02:00 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 02:02:00 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Aug-27 02:02:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 02:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.524 (still bad) 2008-Aug-27 02:02:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 02:02:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 21721.00 2008-Aug-27 02:02:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0011.fits 2008-Aug-27 02:02:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0011.fits} 2008-Aug-27 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.524 (still bad) 2008-Aug-27 02:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Aug-27 02:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-27 02:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 02:02:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:02:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.131 1.077 1.061 2008-Aug-27 02:02:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.971 1.047 0.957 2008-Aug-27 02:02:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.919 1.058 0.964 2008-Aug-27 02:02:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.032 0.109 2008-Aug-27 02:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Aug-27 02:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Aug-27 02:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-27 02:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.158 (still bad) 2008-Aug-27 02:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.162 (still bad) 2008-Aug-27 02:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.159 (still bad) 2008-Aug-27 02:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:03:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:03:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.129 1.077 1.060 2008-Aug-27 02:03:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.968 1.047 0.956 2008-Aug-27 02:03:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 0.926 1.054 0.962 2008-Aug-27 02:03:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.031 0.109 2008-Aug-27 02:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.157 (still bad) 2008-Aug-27 02:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-27 02:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-27 02:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.155 (still bad) 2008-Aug-27 02:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-27 02:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.161 (still bad) 2008-Aug-27 02:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-27 02:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.161 (still bad) 2008-Aug-27 02:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:04:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:04:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.130 1.076 1.060 2008-Aug-27 02:04:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.969 1.045 0.954 2008-Aug-27 02:04:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.918 1.059 0.964 2008-Aug-27 02:04:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.034 0.109 2008-Aug-27 02:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-27 02:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:05:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:05:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.070 1.127 1.076 1.058 2008-Aug-27 02:05:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.964 1.042 0.947 2008-Aug-27 02:05:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.917 1.051 0.958 2008-Aug-27 02:05:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.033 0.109 2008-Aug-27 02:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-27 02:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 02:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.157 (still bad) 2008-Aug-27 02:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:06:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:06:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.147 1.075 1.060 2008-Aug-27 02:06:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.982 1.048 0.957 2008-Aug-27 02:06:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.941 1.070 0.971 2008-Aug-27 02:06:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.030 0.109 2008-Aug-27 02:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 02:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Aug-27 02:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 02:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 02:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Aug-27 02:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-27 02:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-27 02:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-27 02:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-27 02:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Aug-27 02:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Aug-27 02:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Aug-27 02:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 02:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-27 02:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Aug-27 02:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Aug-27 02:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 02:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.145 (still bad) 2008-Aug-27 02:07:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 02:07:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.137 1.085 1.068 2008-Aug-27 02:07:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.972 1.058 0.971 2008-Aug-27 02:07:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.915 1.059 0.967 2008-Aug-27 02:07:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.099 1.031 0.109 2008-Aug-27 02:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Aug-27 02:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 02:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-27 02:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Aug-27 02:07:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 02:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-27 02:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-27 02:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-27 02:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.149 (still bad) 2008-Aug-27 02:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-27 02:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Aug-27 02:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Aug-27 02:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 02:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Aug-27 02:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.154 (still bad) 2008-Aug-27 02:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:08:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:08:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.139 1.077 1.059 2008-Aug-27 02:08:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 0.970 1.050 0.964 2008-Aug-27 02:08:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.915 1.058 0.966 2008-Aug-27 02:08:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.098 1.031 0.109 2008-Aug-27 02:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 02:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 02:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Aug-27 02:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 02:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 02:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.146 (still bad) 2008-Aug-27 02:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Aug-27 02:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Aug-27 02:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 02:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Aug-27 02:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Aug-27 02:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-27 02:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-27 02:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 02:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Aug-27 02:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 02:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-27 02:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 02:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.156 (still bad) 2008-Aug-27 02:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Aug-27 02:09:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 02:09:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.135 1.079 1.062 2008-Aug-27 02:09:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.932 0.971 1.054 0.967 2008-Aug-27 02:09:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.918 1.057 0.965 2008-Aug-27 02:09:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.099 1.032 0.109 2008-Aug-27 02:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-27 02:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 02:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.161 (still bad) 2008-Aug-27 02:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 02:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-27 02:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.163 (still bad) 2008-Aug-27 02:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Aug-27 02:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 02:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-27 02:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.165 (still bad) 2008-Aug-27 02:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.164 (still bad) 2008-Aug-27 02:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.160 (still bad) 2008-Aug-27 02:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Aug-27 02:10:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 02:10:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.134 1.076 1.061 2008-Aug-27 02:10:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 0.971 1.047 0.959 2008-Aug-27 02:10:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.915 1.056 0.966 2008-Aug-27 02:10:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.099 1.043 0.109 2008-Aug-27 02:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-27 02:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.159 (still bad) 2008-Aug-27 02:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Aug-27 02:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:10:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-27 02:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.162 (still bad) 2008-Aug-27 02:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 02:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:11:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:11:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.129 1.077 1.061 2008-Aug-27 02:11:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.967 1.042 0.952 2008-Aug-27 02:11:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.918 1.049 0.962 2008-Aug-27 02:11:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.034 0.109 2008-Aug-27 02:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:12:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 02:12:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 02:12:01 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2008-Aug-27 02:12:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 02:12:01 LOG5 end_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2008-Aug-27 02:12:01 LOG1 fixed_driftmap: New position: year = 2008.6573351902553 RA = 00:07:57.0 RA/Dec = 00:08:25.5 +04:18:35.4 2008-Aug-27 02:12:01 NOTE fixed_driftmap: Correcting ZA to 14:02:38.3 ... 2008-Aug-27 02:12:01 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0439785201 -CF 2008-Aug-27 02:12:01 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 02:12:01 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 02:12:01 LOG5 begin_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2008-Aug-27 02:12:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 02:12:01 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 02:12:01 LOG5 begin_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Aug-27 02:12:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 02:12:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 02:12:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 02:12:01 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 02:12:01 LOG5 begin_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Aug-27 02:12:01 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0439785201 -CF 2008-Aug-27 02:12:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 02:12:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 02:12:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 02:12:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 02:12:01 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 02:12:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 02:12:01 LOG5 end_task: Level: (4) ID = <10180> Status = 0 0 0 0 ok 2008-Aug-27 02:12:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 02:12:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 02:12:01 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 02:12:01 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 02:12:01 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Aug-27 02:12:01 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 02:12:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 02:12:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 02:12:02 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2008-Aug-27 02:12:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 02:12:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 02:12:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 02:12:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 02:12:02 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 02:12:02 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Aug-27 02:12:02 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 02:12:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 02:12:02 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2008-Aug-27 02:12:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 02:12:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 02:12:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 02:12:02 LOG5 end_task: Level: (3) ID = <10179> Status = 0 0 0 0 ok 2008-Aug-27 02:12:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 02:12:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 02:12:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 02:12:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 02:12:02 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Aug-27 02:12:02 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 02:12:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 02:12:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 02:12:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 02:12:02 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2008-Aug-27 02:12:02 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 02:12:02 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 02:12:02 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 02:12:02 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Aug-27 02:12:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 02:12:02 INFO2 take_data: Starting WAPP scan: 824000026 2008-Aug-27 02:12:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 02:12:02 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 02:12:02 LOG5 begin_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Aug-27 02:12:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 02:12:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22323.00 2008-Aug-27 02:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 02:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 02:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 02:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:12:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 02:12:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 02:12:04 LOG5 end_task: Level: (4) ID = <10185> Status = 0 0 0 0 ok 2008-Aug-27 02:12:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 02:12:04 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2008-Aug-27 02:12:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 02:12:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 02:12:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 02:12:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 02:12:04 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Aug-27 02:12:05 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 02:12:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 02:12:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 02:12:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 02:12:05 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2008-Aug-27 02:12:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 02:12:05 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 02:12:05 LOG5 finish_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2008-Aug-27 02:12:05 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 02:12:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 02:12:05 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 02:12:05 LOG5 end_task: Level: (2) ID = <10178> Status = 0 0 0 0 ok 2008-Aug-27 02:12:05 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2008-Aug-27 02:12:05 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2008-Aug-27 02:12:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:12:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:12:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:12:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:12:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 02:12:05 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 02:12:05 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 02:12:05 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 02:12:05 LOG5 begin_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2008-Aug-27 02:12:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 02:12:05 INFO2 take_data: Starting WAPP scan: 824000027 2008-Aug-27 02:12:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 02:12:05 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 02:12:05 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Aug-27 02:12:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 02:12:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 02:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.531 (still bad) 2008-Aug-27 02:12:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22326.00 2008-Aug-27 02:12:05 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0012.fits 2008-Aug-27 02:12:05 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0012.fits} 2008-Aug-27 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.531 (still bad) 2008-Aug-27 02:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:12:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:12:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.133 1.074 1.061 2008-Aug-27 02:12:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.967 1.044 0.957 2008-Aug-27 02:12:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.917 1.051 0.965 2008-Aug-27 02:12:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.033 0.109 2008-Aug-27 02:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 02:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-27 02:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 02:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.159 (still bad) 2008-Aug-27 02:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 02:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 02:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.159 (still bad) 2008-Aug-27 02:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 02:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 02:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:13:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:13:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.132 1.078 1.063 2008-Aug-27 02:13:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.967 1.043 0.953 2008-Aug-27 02:13:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.917 1.049 0.961 2008-Aug-27 02:13:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.030 0.109 2008-Aug-27 02:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 02:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 02:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 02:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:14:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:14:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.128 1.075 1.059 2008-Aug-27 02:14:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.964 1.041 0.947 2008-Aug-27 02:14:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.915 1.051 0.958 2008-Aug-27 02:14:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.030 0.109 2008-Aug-27 02:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 02:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:14:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 02:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 02:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.174 (still bad) 2008-Aug-27 02:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 02:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 02:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 02:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 02:15:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:15:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.087 1.139 1.077 1.058 2008-Aug-27 02:15:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.960 1.038 0.939 2008-Aug-27 02:15:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.915 1.049 0.958 2008-Aug-27 02:15:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.098 1.030 0.109 2008-Aug-27 02:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 02:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 02:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Aug-27 02:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-27 02:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-27 02:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-27 02:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-27 02:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:16:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:16:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.132 1.077 1.060 2008-Aug-27 02:16:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.956 1.082 0.977 2008-Aug-27 02:16:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.921 1.050 0.955 2008-Aug-27 02:16:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.031 0.109 2008-Aug-27 02:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:17:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:17:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.130 1.077 1.059 2008-Aug-27 02:17:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.955 1.042 0.943 2008-Aug-27 02:17:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.915 1.065 0.968 2008-Aug-27 02:17:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.031 0.109 2008-Aug-27 02:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.153 (still bad) 2008-Aug-27 02:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 02:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 02:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 02:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 02:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 02:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:18:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:18:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.136 1.075 1.059 2008-Aug-27 02:18:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.960 1.048 0.955 2008-Aug-27 02:18:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.914 1.056 0.959 2008-Aug-27 02:18:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.032 0.109 2008-Aug-27 02:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 02:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:18:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:18:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:18:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:18:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 02:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:19:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:19:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.126 1.080 1.063 2008-Aug-27 02:19:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.959 1.046 0.949 2008-Aug-27 02:19:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.915 1.051 0.954 2008-Aug-27 02:19:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.033 0.109 2008-Aug-27 02:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:20:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:20:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:20:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:20:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:20:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:20:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:20:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:20:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.072 1.130 1.078 1.064 2008-Aug-27 02:20:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.963 1.048 0.956 2008-Aug-27 02:20:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.914 1.054 0.957 2008-Aug-27 02:20:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.029 0.109 2008-Aug-27 02:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 02:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 02:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-27 02:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 02:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 02:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:21:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:21:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.130 1.077 1.061 2008-Aug-27 02:21:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.962 1.051 0.959 2008-Aug-27 02:21:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.916 1.055 0.962 2008-Aug-27 02:21:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.032 0.109 2008-Aug-27 02:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.157 (still bad) 2008-Aug-27 02:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Aug-27 02:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 02:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.157 (still bad) 2008-Aug-27 02:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Aug-27 02:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 02:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.153 (still bad) 2008-Aug-27 02:22:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 02:22:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 02:22:06 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2008-Aug-27 02:22:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 02:22:06 LOG5 end_task: Level: (2) ID = <10187> Status = 0 0 0 0 ok 2008-Aug-27 02:22:06 LOG1 fixed_driftmap: New position: year = 2008.6573543615484 RA = 00:18:03.7 RA/Dec = 00:18:32.2 +04:18:35.2 2008-Aug-27 02:22:06 NOTE fixed_driftmap: Correcting ZA to 14:02:38.5 ... 2008-Aug-27 02:22:06 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0440324840 -CF 2008-Aug-27 02:22:06 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 02:22:06 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 02:22:06 LOG5 begin_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2008-Aug-27 02:22:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 02:22:06 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 02:22:06 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2008-Aug-27 02:22:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 02:22:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 02:22:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 02:22:06 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 02:22:06 LOG5 begin_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Aug-27 02:22:06 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0440324840 -CF 2008-Aug-27 02:22:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 02:22:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 02:22:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 02:22:06 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 02:22:06 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 02:22:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 02:22:06 LOG5 end_task: Level: (4) ID = <10191> Status = 0 0 0 0 ok 2008-Aug-27 02:22:07 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 02:22:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 02:22:07 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 02:22:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 02:22:07 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Aug-27 02:22:07 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 02:22:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 02:22:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 02:22:07 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2008-Aug-27 02:22:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 02:22:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 02:22:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 02:22:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 02:22:07 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 02:22:07 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Aug-27 02:22:07 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 02:22:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 02:22:07 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2008-Aug-27 02:22:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 02:22:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 02:22:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 02:22:07 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2008-Aug-27 02:22:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 02:22:07 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 02:22:07 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 02:22:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 02:22:07 LOG5 begin_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2008-Aug-27 02:22:07 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 02:22:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 02:22:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 02:22:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 02:22:07 LOG5 end_task: Level: (3) ID = <10194> Status = 0 0 0 0 ok 2008-Aug-27 02:22:07 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 02:22:07 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 02:22:07 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 02:22:07 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Aug-27 02:22:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 02:22:07 INFO2 take_data: Starting WAPP scan: 824000028 2008-Aug-27 02:22:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 02:22:07 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 02:22:07 LOG5 begin_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Aug-27 02:22:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 02:22:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22928.00 2008-Aug-27 02:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 02:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 02:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 02:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:22:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 02:22:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 02:22:09 LOG5 end_task: Level: (4) ID = <10196> Status = 0 0 0 0 ok 2008-Aug-27 02:22:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 02:22:09 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2008-Aug-27 02:22:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 02:22:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 02:22:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 02:22:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 02:22:09 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Aug-27 02:22:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 02:22:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 02:22:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 02:22:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 02:22:09 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2008-Aug-27 02:22:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 02:22:09 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 02:22:09 LOG5 finish_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2008-Aug-27 02:22:09 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 02:22:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 02:22:09 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 02:22:09 LOG5 end_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2008-Aug-27 02:22:09 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2008-Aug-27 02:22:09 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2008-Aug-27 02:22:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:22:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:22:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:22:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:22:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 02:22:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 02:22:10 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 02:22:10 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 02:22:10 LOG5 begin_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2008-Aug-27 02:22:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 02:22:10 INFO2 take_data: Starting WAPP scan: 824000029 2008-Aug-27 02:22:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 02:22:10 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 02:22:10 LOG5 begin_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Aug-27 02:22:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 02:22:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 02:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.523 (still bad) 2008-Aug-27 02:22:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 22931.00 2008-Aug-27 02:22:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0013.fits 2008-Aug-27 02:22:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0013.fits} 2008-Aug-27 02:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 02:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 02:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 02:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.523 (still bad) 2008-Aug-27 02:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.157 (still bad) 2008-Aug-27 02:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Aug-27 02:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 02:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 02:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-27 02:22:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:22:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.098 1.166 1.077 1.061 2008-Aug-27 02:22:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.971 1.053 0.965 2008-Aug-27 02:22:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.921 1.062 0.972 2008-Aug-27 02:22:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.955 0.098 1.041 0.109 2008-Aug-27 02:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.172 (still bad) 2008-Aug-27 02:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.174 (still bad) 2008-Aug-27 02:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.193 (still bad) 2008-Aug-27 02:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.182 (still bad) 2008-Aug-27 02:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.170 (still bad) 2008-Aug-27 02:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-27 02:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 02:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 02:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.156 (still bad) 2008-Aug-27 02:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 02:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 02:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Aug-27 02:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 02:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 02:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.157 (still bad) 2008-Aug-27 02:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 02:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Aug-27 02:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 02:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 02:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 02:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Aug-27 02:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 02:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:23:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:23:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.140 1.078 1.062 2008-Aug-27 02:23:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.976 1.054 0.964 2008-Aug-27 02:23:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.919 1.061 0.970 2008-Aug-27 02:23:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.031 0.109 2008-Aug-27 02:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 02:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 02:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 02:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 02:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 02:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 02:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 02:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:24:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:24:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.128 1.078 1.062 2008-Aug-27 02:24:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.963 1.045 0.949 2008-Aug-27 02:24:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.917 1.055 0.965 2008-Aug-27 02:24:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.031 0.109 2008-Aug-27 02:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:25:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:25:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.074 1.126 1.076 1.062 2008-Aug-27 02:25:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.960 1.040 0.943 2008-Aug-27 02:25:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.918 1.053 0.961 2008-Aug-27 02:25:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.030 0.109 2008-Aug-27 02:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 02:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 02:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 02:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 02:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:26:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:26:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 1.125 1.079 1.062 2008-Aug-27 02:26:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.933 0.957 1.039 0.939 2008-Aug-27 02:26:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.081 0.916 1.048 0.956 2008-Aug-27 02:26:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.032 0.109 2008-Aug-27 02:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 02:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 02:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 02:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 02:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 02:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.159 (still bad) 2008-Aug-27 02:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.169 (still bad) 2008-Aug-27 02:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.177 (still bad) 2008-Aug-27 02:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.182 (still bad) 2008-Aug-27 02:27:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:27:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.128 1.202 1.082 1.065 2008-Aug-27 02:27:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.961 1.041 0.943 2008-Aug-27 02:27:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.920 1.053 0.959 2008-Aug-27 02:27:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.032 0.109 2008-Aug-27 02:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.174 (still bad) 2008-Aug-27 02:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.158 (still bad) 2008-Aug-27 02:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 02:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 02:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 02:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 02:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:28:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:28:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.128 1.078 1.060 2008-Aug-27 02:28:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.959 1.043 0.945 2008-Aug-27 02:28:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.916 1.054 0.958 2008-Aug-27 02:28:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.034 0.109 2008-Aug-27 02:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 02:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.160 (still bad) 2008-Aug-27 02:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-27 02:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:29:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:29:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.130 1.077 1.060 2008-Aug-27 02:29:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.958 1.042 0.941 2008-Aug-27 02:29:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.924 1.053 0.957 2008-Aug-27 02:29:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.034 0.109 2008-Aug-27 02:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-27 02:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-27 02:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 02:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:30:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:30:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.123 1.078 1.062 2008-Aug-27 02:30:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.965 1.044 0.943 2008-Aug-27 02:30:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.918 1.051 0.953 2008-Aug-27 02:30:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.031 0.109 2008-Aug-27 02:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:31:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:31:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.125 1.081 1.062 2008-Aug-27 02:31:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.955 1.044 0.947 2008-Aug-27 02:31:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.916 1.050 0.955 2008-Aug-27 02:31:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.031 0.109 2008-Aug-27 02:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:32:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 02:32:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 02:32:11 LOG5 end_task: Level: (3) ID = <10199> Status = 0 0 0 0 ok 2008-Aug-27 02:32:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 02:32:11 LOG5 end_task: Level: (2) ID = <10198> Status = 0 0 0 0 ok 2008-Aug-27 02:32:11 LOG1 fixed_driftmap: New position: year = 2008.6573735328416 RA = 00:28:10.3 RA/Dec = 00:28:38.8 +04:18:34.6 2008-Aug-27 02:32:11 NOTE fixed_driftmap: Correcting ZA to 14:02:39.1 ... 2008-Aug-27 02:32:11 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0441825548 -CF 2008-Aug-27 02:32:11 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 02:32:11 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 02:32:11 LOG5 begin_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2008-Aug-27 02:32:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 02:32:11 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 02:32:11 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2008-Aug-27 02:32:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 02:32:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 02:32:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 02:32:11 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 02:32:11 LOG5 begin_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2008-Aug-27 02:32:11 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0441825548 -CF 2008-Aug-27 02:32:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 02:32:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 02:32:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 02:32:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 02:32:11 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 02:32:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 02:32:11 LOG5 end_task: Level: (4) ID = <10202> Status = 0 0 0 0 ok 2008-Aug-27 02:32:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 02:32:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 02:32:11 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 02:32:11 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 02:32:11 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2008-Aug-27 02:32:11 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 02:32:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 02:32:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 02:32:12 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2008-Aug-27 02:32:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 02:32:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 02:32:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 02:32:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 02:32:12 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 02:32:12 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2008-Aug-27 02:32:12 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 02:32:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 02:32:12 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2008-Aug-27 02:32:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 02:32:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 02:32:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 02:32:12 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2008-Aug-27 02:32:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 02:32:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 02:32:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 02:32:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 02:32:12 LOG5 begin_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Aug-27 02:32:12 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 02:32:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 02:32:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 02:32:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 02:32:12 LOG5 end_task: Level: (3) ID = <10205> Status = 0 0 0 0 ok 2008-Aug-27 02:32:12 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 02:32:12 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 02:32:12 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 02:32:12 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Aug-27 02:32:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 02:32:12 INFO2 take_data: Starting WAPP scan: 824000030 2008-Aug-27 02:32:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 02:32:12 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 02:32:12 LOG5 begin_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Aug-27 02:32:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 02:32:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23533.00 2008-Aug-27 02:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 02:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 02:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 02:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:32:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 02:32:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 02:32:14 LOG5 end_task: Level: (4) ID = <10207> Status = 0 0 0 0 ok 2008-Aug-27 02:32:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 02:32:14 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2008-Aug-27 02:32:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 02:32:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 02:32:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 02:32:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 02:32:14 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-Aug-27 02:32:15 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 02:32:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 02:32:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 02:32:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 02:32:15 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2008-Aug-27 02:32:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 02:32:15 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 02:32:15 LOG5 finish_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2008-Aug-27 02:32:15 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 02:32:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 02:32:15 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 02:32:15 LOG5 end_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2008-Aug-27 02:32:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2008-Aug-27 02:32:15 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2008-Aug-27 02:32:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:32:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:32:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:32:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:32:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 02:32:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 02:32:15 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 02:32:15 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 02:32:15 LOG5 begin_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2008-Aug-27 02:32:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 02:32:15 INFO2 take_data: Starting WAPP scan: 824000031 2008-Aug-27 02:32:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 02:32:15 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 02:32:15 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2008-Aug-27 02:32:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 02:32:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 02:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.509 (still bad) 2008-Aug-27 02:32:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 23536.00 2008-Aug-27 02:32:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0014.fits 2008-Aug-27 02:32:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0014.fits} 2008-Aug-27 02:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 02:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 02:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 02:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.509 (still bad) 2008-Aug-27 02:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 02:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:32:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:32:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.122 1.080 1.062 2008-Aug-27 02:32:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.952 1.042 0.941 2008-Aug-27 02:32:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.916 1.051 0.949 2008-Aug-27 02:32:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.031 0.109 2008-Aug-27 02:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 02:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 02:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 02:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 02:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 02:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:33:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:33:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.123 1.080 1.063 2008-Aug-27 02:33:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.951 1.042 0.940 2008-Aug-27 02:33:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.916 1.050 0.951 2008-Aug-27 02:33:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.098 1.031 0.109 2008-Aug-27 02:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 02:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 02:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:34:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:34:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.121 1.080 1.062 2008-Aug-27 02:34:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.954 1.044 0.941 2008-Aug-27 02:34:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.916 1.052 0.951 2008-Aug-27 02:34:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.032 0.109 2008-Aug-27 02:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 02:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 02:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:35:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:35:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.127 1.087 1.070 2008-Aug-27 02:35:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.967 1.048 0.948 2008-Aug-27 02:35:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.918 1.056 0.954 2008-Aug-27 02:35:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.033 0.109 2008-Aug-27 02:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 02:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 02:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 02:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 02:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 02:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 02:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 02:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:36:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:36:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.139 1.080 1.061 2008-Aug-27 02:36:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.974 1.057 0.959 2008-Aug-27 02:36:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 0.919 1.069 0.971 2008-Aug-27 02:36:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.033 0.109 2008-Aug-27 02:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 02:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 02:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 02:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 02:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 02:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.165 (still bad) 2008-Aug-27 02:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 02:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 02:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.167 (still bad) 2008-Aug-27 02:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 02:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.152 (still bad) 2008-Aug-27 02:37:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:37:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.136 1.081 1.061 2008-Aug-27 02:37:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.965 1.088 0.996 2008-Aug-27 02:37:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.917 1.062 0.962 2008-Aug-27 02:37:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.033 0.109 2008-Aug-27 02:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 02:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 02:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 02:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 02:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 02:38:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:38:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.130 1.081 1.059 2008-Aug-27 02:38:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.961 1.052 0.956 2008-Aug-27 02:38:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.915 1.060 0.960 2008-Aug-27 02:38:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.953 0.098 1.037 0.109 2008-Aug-27 02:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 02:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:40:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:40:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.126 1.084 1.062 2008-Aug-27 02:40:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.960 1.051 0.947 2008-Aug-27 02:40:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.916 1.056 0.957 2008-Aug-27 02:40:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.098 1.034 0.109 2008-Aug-27 02:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:40:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:40:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:40:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:40:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:40:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:40:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:40:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:41:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:41:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.125 1.080 1.058 2008-Aug-27 02:41:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.956 1.049 0.948 2008-Aug-27 02:41:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.916 1.058 0.955 2008-Aug-27 02:41:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.033 0.109 2008-Aug-27 02:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 02:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 02:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:42:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:42:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.122 1.078 1.060 2008-Aug-27 02:42:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.934 0.957 1.051 0.948 2008-Aug-27 02:42:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.917 1.054 0.954 2008-Aug-27 02:42:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.035 0.110 2008-Aug-27 02:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 02:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-27 02:42:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:42:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:42:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 02:42:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 02:42:16 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2008-Aug-27 02:42:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 02:42:16 LOG5 end_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2008-Aug-27 02:42:16 LOG1 fixed_driftmap: New position: year = 2008.6573927041347 RA = 00:38:17.0 RA/Dec = 00:38:45.5 +04:18:33.8 2008-Aug-27 02:42:16 NOTE fixed_driftmap: Correcting ZA to 14:02:39.9 ... 2008-Aug-27 02:42:16 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0444284398 -CF 2008-Aug-27 02:42:16 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 02:42:16 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 02:42:16 LOG5 begin_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2008-Aug-27 02:42:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 02:42:16 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 02:42:16 LOG5 begin_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2008-Aug-27 02:42:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 02:42:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 02:42:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 02:42:16 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 02:42:16 LOG5 begin_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2008-Aug-27 02:42:16 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0444284398 -CF 2008-Aug-27 02:42:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 02:42:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 02:42:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 02:42:16 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 02:42:17 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 02:42:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 02:42:17 LOG5 end_task: Level: (4) ID = <10213> Status = 0 0 0 0 ok 2008-Aug-27 02:42:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 02:42:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 02:42:17 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 02:42:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 02:42:17 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Aug-27 02:42:17 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 02:42:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 02:42:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 02:42:17 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2008-Aug-27 02:42:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 02:42:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 02:42:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 02:42:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 02:42:17 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 02:42:17 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2008-Aug-27 02:42:17 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 02:42:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 02:42:17 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2008-Aug-27 02:42:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 02:42:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 02:42:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 02:42:17 LOG5 end_task: Level: (3) ID = <10212> Status = 0 0 0 0 ok 2008-Aug-27 02:42:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 02:42:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 02:42:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 02:42:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 02:42:17 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2008-Aug-27 02:42:17 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 02:42:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 02:42:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 02:42:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 02:42:17 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2008-Aug-27 02:42:17 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 02:42:17 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 02:42:17 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 02:42:17 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-Aug-27 02:42:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 02:42:17 INFO2 take_data: Starting WAPP scan: 824000032 2008-Aug-27 02:42:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 02:42:17 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 02:42:17 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2008-Aug-27 02:42:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 02:42:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24138.00 2008-Aug-27 02:42:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 02:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 02:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 02:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:42:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 02:42:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 02:42:19 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2008-Aug-27 02:42:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 02:42:19 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2008-Aug-27 02:42:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 02:42:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 02:42:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 02:42:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 02:42:19 LOG5 begin_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2008-Aug-27 02:42:19 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 02:42:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 02:42:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 02:42:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 02:42:19 LOG5 end_task: Level: (3) ID = <10219> Status = 0 0 0 0 ok 2008-Aug-27 02:42:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 02:42:19 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 02:42:19 LOG5 finish_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2008-Aug-27 02:42:19 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 02:42:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 02:42:19 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 02:42:19 LOG5 end_task: Level: (2) ID = <10211> Status = 0 0 0 0 ok 2008-Aug-27 02:42:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2008-Aug-27 02:42:20 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2008-Aug-27 02:42:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:42:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:42:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:42:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:42:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 02:42:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 02:42:20 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 02:42:20 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 02:42:20 LOG5 begin_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2008-Aug-27 02:42:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 02:42:20 INFO2 take_data: Starting WAPP scan: 824000033 2008-Aug-27 02:42:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 02:42:20 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 02:42:20 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Aug-27 02:42:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 02:42:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 02:42:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24141.00 2008-Aug-27 02:42:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.512 (still bad) 2008-Aug-27 02:42:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0015.fits 2008-Aug-27 02:42:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0015.fits} 2008-Aug-27 02:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 02:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 02:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 02:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:42:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.512 (still bad) 2008-Aug-27 02:42:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-27 02:42:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-27 02:42:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-27 02:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-27 02:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.151 (still bad) 2008-Aug-27 02:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-27 02:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-27 02:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.150 (still bad) 2008-Aug-27 02:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 02:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 02:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-27 02:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 02:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-27 02:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:43:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:43:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.120 1.078 1.060 2008-Aug-27 02:43:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.956 1.049 0.946 2008-Aug-27 02:43:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.914 1.053 0.954 2008-Aug-27 02:43:03 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.034 0.109 2008-Aug-27 02:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:43:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-27 02:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Aug-27 02:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:43:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:43:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 02:43:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:43:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:43:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:43:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:43:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:43:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:43:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:44:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:44:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:44:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:44:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 1.134 1.079 1.058 2008-Aug-27 02:44:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.954 1.045 0.941 2008-Aug-27 02:44:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.914 1.054 0.954 2008-Aug-27 02:44:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.036 0.109 2008-Aug-27 02:44:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 02:44:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 02:44:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.153 (still bad) 2008-Aug-27 02:44:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 02:44:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 02:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 02:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 02:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:45:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:45:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.118 1.078 1.061 2008-Aug-27 02:45:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.954 1.051 0.942 2008-Aug-27 02:45:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.913 1.052 0.951 2008-Aug-27 02:45:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.035 0.109 2008-Aug-27 02:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 02:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:45:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:45:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 02:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:46:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:46:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.122 1.081 1.060 2008-Aug-27 02:46:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.956 1.050 0.946 2008-Aug-27 02:46:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.915 1.056 0.954 2008-Aug-27 02:46:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.035 0.109 2008-Aug-27 02:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:47:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:47:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.122 1.080 1.059 2008-Aug-27 02:47:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.956 1.049 0.945 2008-Aug-27 02:47:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.916 1.054 0.954 2008-Aug-27 02:47:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.034 0.109 2008-Aug-27 02:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-27 02:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Aug-27 02:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-27 02:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 02:48:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:48:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.133 1.079 1.059 2008-Aug-27 02:48:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.963 1.060 0.966 2008-Aug-27 02:48:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 0.915 1.064 0.966 2008-Aug-27 02:48:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.035 0.109 2008-Aug-27 02:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 02:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Aug-27 02:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 02:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Aug-27 02:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Aug-27 02:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 02:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 02:49:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 02:49:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.144 1.082 1.058 2008-Aug-27 02:49:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.968 1.063 0.967 2008-Aug-27 02:49:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.922 1.070 0.975 2008-Aug-27 02:49:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.099 1.035 0.110 2008-Aug-27 02:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 02:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Aug-27 02:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.165 (still bad) 2008-Aug-27 02:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 02:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Aug-27 02:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 02:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.169 (still bad) 2008-Aug-27 02:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 02:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Aug-27 02:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 02:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.169 (still bad) 2008-Aug-27 02:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.144 (still bad) 2008-Aug-27 02:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Aug-27 02:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.172 (still bad) 2008-Aug-27 02:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 02:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 02:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Aug-27 02:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Aug-27 02:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Aug-27 02:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.173 (still bad) 2008-Aug-27 02:50:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:50:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.143 1.080 1.060 2008-Aug-27 02:50:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.968 1.065 0.971 2008-Aug-27 02:50:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.091 0.920 1.070 0.972 2008-Aug-27 02:50:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.098 1.035 0.110 2008-Aug-27 02:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Aug-27 02:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Aug-27 02:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Aug-27 02:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Aug-27 02:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.169 (still bad) 2008-Aug-27 02:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Aug-27 02:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Aug-27 02:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Aug-27 02:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Aug-27 02:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Aug-27 02:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.167 (still bad) 2008-Aug-27 02:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.142 (still bad) 2008-Aug-27 02:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Aug-27 02:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Aug-27 02:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Aug-27 02:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Aug-27 02:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.163 (still bad) 2008-Aug-27 02:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Aug-27 02:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Aug-27 02:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Aug-27 02:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Aug-27 02:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Aug-27 02:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Aug-27 02:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-27 02:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-27 02:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.141 (still bad) 2008-Aug-27 02:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Aug-27 02:51:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 02:51:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.083 1.134 1.080 1.058 2008-Aug-27 02:51:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.964 1.053 0.955 2008-Aug-27 02:51:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.918 1.062 0.964 2008-Aug-27 02:51:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.099 1.034 0.110 2008-Aug-27 02:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 02:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 02:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-27 02:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-27 02:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-27 02:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Aug-27 02:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-27 02:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-27 02:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 02:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 02:51:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 02:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 02:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-27 02:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Aug-27 02:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:52:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:52:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.130 1.080 1.058 2008-Aug-27 02:52:15 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.963 1.054 0.956 2008-Aug-27 02:52:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.915 1.060 0.962 2008-Aug-27 02:52:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.035 0.109 2008-Aug-27 02:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:52:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 02:52:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 02:52:21 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2008-Aug-27 02:52:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 02:52:21 LOG5 end_task: Level: (2) ID = <10220> Status = 0 0 0 0 ok 2008-Aug-27 02:52:21 LOG1 fixed_driftmap: New position: year = 2008.6574118754279 RA = 00:48:23.6 RA/Dec = 00:48:52.2 +04:18:32.5 2008-Aug-27 02:52:21 NOTE fixed_driftmap: Correcting ZA to 14:02:41.2 ... 2008-Aug-27 02:52:21 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0447696601 -CF 2008-Aug-27 02:52:21 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 02:52:21 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 02:52:21 LOG5 begin_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2008-Aug-27 02:52:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 02:52:21 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 02:52:21 LOG5 begin_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2008-Aug-27 02:52:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 02:52:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 02:52:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 02:52:21 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 02:52:21 LOG5 begin_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-Aug-27 02:52:21 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0447696601 -CF 2008-Aug-27 02:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:52:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 02:52:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 02:52:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 02:52:21 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 02:52:21 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 02:52:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 02:52:21 LOG5 end_task: Level: (4) ID = <10224> Status = 0 0 0 0 ok 2008-Aug-27 02:52:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 02:52:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 02:52:21 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 02:52:21 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 02:52:21 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2008-Aug-27 02:52:22 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 02:52:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 02:52:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 02:52:22 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2008-Aug-27 02:52:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 02:52:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 02:52:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 02:52:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 02:52:22 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 02:52:22 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2008-Aug-27 02:52:22 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 02:52:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 02:52:22 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2008-Aug-27 02:52:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 02:52:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 02:52:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 02:52:22 LOG5 end_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2008-Aug-27 02:52:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 02:52:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 02:52:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 02:52:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 02:52:22 LOG5 begin_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2008-Aug-27 02:52:22 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 02:52:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 02:52:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 02:52:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 02:52:22 LOG5 end_task: Level: (3) ID = <10227> Status = 0 0 0 0 ok 2008-Aug-27 02:52:22 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 02:52:22 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 02:52:22 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 02:52:22 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2008-Aug-27 02:52:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 02:52:22 INFO2 take_data: Starting WAPP scan: 824000034 2008-Aug-27 02:52:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 02:52:22 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 02:52:22 LOG5 begin_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2008-Aug-27 02:52:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 02:52:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24743.00 2008-Aug-27 02:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 02:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 02:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 02:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:52:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 02:52:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 02:52:24 LOG5 end_task: Level: (4) ID = <10229> Status = 0 0 0 0 ok 2008-Aug-27 02:52:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 02:52:24 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2008-Aug-27 02:52:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 02:52:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 02:52:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 02:52:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 02:52:24 LOG5 begin_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2008-Aug-27 02:52:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 02:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.508 (still bad) 2008-Aug-27 02:52:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 02:52:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 02:52:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 02:52:25 LOG5 end_task: Level: (3) ID = <10230> Status = 0 0 0 0 ok 2008-Aug-27 02:52:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 02:52:25 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 02:52:25 LOG5 finish_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2008-Aug-27 02:52:25 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 02:52:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 02:52:25 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 02:52:25 LOG5 end_task: Level: (2) ID = <10222> Status = 0 0 0 0 ok 2008-Aug-27 02:52:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2008-Aug-27 02:52:25 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2008-Aug-27 02:52:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:52:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:52:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:52:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 02:52:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 02:52:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 02:52:25 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 02:52:25 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 02:52:25 LOG5 begin_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2008-Aug-27 02:52:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 02:52:25 INFO2 take_data: Starting WAPP scan: 824000035 2008-Aug-27 02:52:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 02:52:25 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 02:52:25 LOG5 begin_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-Aug-27 02:52:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 02:52:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 02:52:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 24746.00 2008-Aug-27 02:52:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0016.fits 2008-Aug-27 02:52:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0016.fits} 2008-Aug-27 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 02:52:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:52:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:52:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:52:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:52:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:52:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:52:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:53:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:53:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.124 1.080 1.058 2008-Aug-27 02:53:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.959 1.054 0.950 2008-Aug-27 02:53:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.915 1.059 0.959 2008-Aug-27 02:53:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.034 0.109 2008-Aug-27 02:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 02:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:53:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:54:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:54:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:54:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:54:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.125 1.079 1.058 2008-Aug-27 02:54:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.957 1.054 0.948 2008-Aug-27 02:54:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.916 1.053 0.955 2008-Aug-27 02:54:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.033 0.109 2008-Aug-27 02:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 02:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 02:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 02:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 02:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:55:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:55:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:55:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:55:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.124 1.078 1.057 2008-Aug-27 02:55:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.957 1.043 0.941 2008-Aug-27 02:55:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.917 1.052 0.953 2008-Aug-27 02:55:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.033 0.109 2008-Aug-27 02:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:55:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 02:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 02:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 02:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 02:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:56:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:56:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.117 1.079 1.057 2008-Aug-27 02:56:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.952 1.044 0.934 2008-Aug-27 02:56:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.915 1.055 0.953 2008-Aug-27 02:56:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.035 0.109 2008-Aug-27 02:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 02:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 02:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 02:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 02:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:56:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 02:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.158 (still bad) 2008-Aug-27 02:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 02:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 02:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 02:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:57:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:57:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.119 1.079 1.058 2008-Aug-27 02:57:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.956 1.052 0.941 2008-Aug-27 02:57:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.914 1.053 0.951 2008-Aug-27 02:57:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.032 0.109 2008-Aug-27 02:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 02:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 02:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:57:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:58:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:58:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:58:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.119 1.078 1.057 2008-Aug-27 02:58:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.953 1.051 0.945 2008-Aug-27 02:58:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.916 1.054 0.951 2008-Aug-27 02:58:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.035 0.109 2008-Aug-27 02:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 02:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 02:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 02:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 02:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 02:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 02:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 02:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 02:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 02:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 02:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 02:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 02:59:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 02:59:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.124 1.083 1.062 2008-Aug-27 02:59:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.954 1.057 0.952 2008-Aug-27 02:59:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.915 1.055 0.953 2008-Aug-27 02:59:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.036 0.109 2008-Aug-27 02:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:59:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 02:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 02:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 02:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 02:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 02:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 02:59:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 02:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 02:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 03:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:00:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:00:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.117 1.075 1.057 2008-Aug-27 03:00:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.950 1.045 0.938 2008-Aug-27 03:00:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.913 1.052 0.951 2008-Aug-27 03:00:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.954 0.098 1.042 0.109 2008-Aug-27 03:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 03:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:01:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:01:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.116 1.078 1.055 2008-Aug-27 03:01:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.950 1.046 0.939 2008-Aug-27 03:01:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.913 1.052 0.948 2008-Aug-27 03:01:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.957 0.098 1.044 0.109 2008-Aug-27 03:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 03:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:02:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:02:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 03:02:26 LOG5 end_task: Level: (3) ID = <10232> Status = 0 0 0 0 ok 2008-Aug-27 03:02:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 03:02:26 LOG5 end_task: Level: (2) ID = <10231> Status = 0 0 0 0 ok 2008-Aug-27 03:02:26 LOG1 fixed_driftmap: New position: year = 2008.6574310467211 RA = 00:58:30.3 RA/Dec = 00:58:58.8 +04:18:31.0 2008-Aug-27 03:02:26 NOTE fixed_driftmap: Correcting ZA to 14:02:42.7 ... 2008-Aug-27 03:02:26 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0452055569 -CF 2008-Aug-27 03:02:26 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 03:02:26 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 03:02:26 LOG5 begin_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2008-Aug-27 03:02:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 03:02:26 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 03:02:26 LOG5 begin_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Aug-27 03:02:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 03:02:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 03:02:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:02:26 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 03:02:26 LOG5 begin_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2008-Aug-27 03:02:26 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0452055569 -CF 2008-Aug-27 03:02:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:02:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 03:02:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:02:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:02:27 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 03:02:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 03:02:27 LOG5 end_task: Level: (4) ID = <10235> Status = 0 0 0 0 ok 2008-Aug-27 03:02:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 03:02:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 03:02:27 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 03:02:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 03:02:27 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Aug-27 03:02:27 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:02:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 03:02:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 03:02:27 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2008-Aug-27 03:02:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 03:02:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 03:02:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 03:02:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 03:02:27 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 03:02:27 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2008-Aug-27 03:02:27 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 03:02:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 03:02:27 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2008-Aug-27 03:02:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 03:02:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 03:02:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 03:02:27 LOG5 end_task: Level: (3) ID = <10234> Status = 0 0 0 0 ok 2008-Aug-27 03:02:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 03:02:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 03:02:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 03:02:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 03:02:27 LOG5 begin_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Aug-27 03:02:27 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 03:02:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 03:02:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 03:02:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 03:02:27 LOG5 end_task: Level: (3) ID = <10238> Status = 0 0 0 0 ok 2008-Aug-27 03:02:27 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 03:02:27 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 03:02:27 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 03:02:27 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Aug-27 03:02:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 03:02:27 INFO2 take_data: Starting WAPP scan: 824000036 2008-Aug-27 03:02:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 03:02:27 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 03:02:27 LOG5 begin_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Aug-27 03:02:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:02:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25348.00 2008-Aug-27 03:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:02:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:02:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 03:02:29 LOG5 end_task: Level: (4) ID = <10240> Status = 0 0 0 0 ok 2008-Aug-27 03:02:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 03:02:29 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2008-Aug-27 03:02:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 03:02:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 03:02:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 03:02:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 03:02:29 LOG5 begin_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Aug-27 03:02:29 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 03:02:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 03:02:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 03:02:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 03:02:29 LOG5 end_task: Level: (3) ID = <10241> Status = 0 0 0 0 ok 2008-Aug-27 03:02:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 03:02:29 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 03:02:29 LOG5 finish_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2008-Aug-27 03:02:29 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 03:02:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 03:02:29 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 03:02:29 LOG5 end_task: Level: (2) ID = <10233> Status = 0 0 0 0 ok 2008-Aug-27 03:02:29 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2008-Aug-27 03:02:29 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2008-Aug-27 03:02:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:02:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:02:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:02:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:02:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 03:02:30 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 03:02:30 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 03:02:30 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 03:02:30 LOG5 begin_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2008-Aug-27 03:02:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 03:02:30 INFO2 take_data: Starting WAPP scan: 824000037 2008-Aug-27 03:02:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 03:02:30 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 03:02:30 LOG5 begin_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2008-Aug-27 03:02:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 03:02:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 03:02:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.117 1.077 1.057 2008-Aug-27 03:02:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.274 1.292 1.436 1.278 2008-Aug-27 03:02:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.501 1.277 1.451 1.255 2008-Aug-27 03:02:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.313 0.099 1.434 0.110 2008-Aug-27 03:02:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:02:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25351.00 2008-Aug-27 03:02:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0017.fits 2008-Aug-27 03:02:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0017.fits} 2008-Aug-27 03:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 03:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-27 03:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-27 03:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:03:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:03:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.117 1.075 1.054 2008-Aug-27 03:03:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.946 1.044 0.932 2008-Aug-27 03:03:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.914 1.054 0.950 2008-Aug-27 03:03:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.033 0.109 2008-Aug-27 03:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 03:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 03:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.175 (still bad) 2008-Aug-27 03:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.193 (still bad) 2008-Aug-27 03:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.206 (still bad) 2008-Aug-27 03:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.220 (still bad) 2008-Aug-27 03:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.205 (still bad) 2008-Aug-27 03:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.183 (still bad) 2008-Aug-27 03:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.161 (still bad) 2008-Aug-27 03:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 03:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 03:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 03:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:04:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:04:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.113 1.078 1.056 2008-Aug-27 03:04:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.955 1.045 0.933 2008-Aug-27 03:04:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.915 1.049 0.946 2008-Aug-27 03:04:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.098 1.031 0.109 2008-Aug-27 03:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 03:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:04:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-27 03:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 03:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-27 03:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:05:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:05:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.114 1.077 1.056 2008-Aug-27 03:05:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.944 1.042 0.930 2008-Aug-27 03:05:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.915 1.048 0.946 2008-Aug-27 03:05:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.098 1.031 0.109 2008-Aug-27 03:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 03:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-27 03:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:06:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:06:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.117 1.124 1.098 2008-Aug-27 03:06:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.945 1.045 0.935 2008-Aug-27 03:06:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.914 1.048 0.946 2008-Aug-27 03:06:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.951 0.098 1.038 0.109 2008-Aug-27 03:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 03:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 03:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-27 03:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:07:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:07:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.118 1.078 1.056 2008-Aug-27 03:07:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.949 1.046 0.937 2008-Aug-27 03:07:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.915 1.050 0.947 2008-Aug-27 03:07:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.031 0.109 2008-Aug-27 03:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-27 03:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-27 03:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 03:08:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:08:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.075 1.117 1.075 1.056 2008-Aug-27 03:08:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.945 1.042 0.932 2008-Aug-27 03:08:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.913 1.050 0.944 2008-Aug-27 03:08:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.030 0.109 2008-Aug-27 03:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 03:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 03:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 03:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:09:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 03:09:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.120 1.076 1.056 2008-Aug-27 03:09:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.947 1.048 0.941 2008-Aug-27 03:09:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.912 1.052 0.946 2008-Aug-27 03:09:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.099 1.031 0.110 2008-Aug-27 03:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-27 03:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 03:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 03:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-27 03:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-27 03:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-27 03:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-27 03:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:10:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 03:10:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.117 1.077 1.057 2008-Aug-27 03:10:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.940 0.946 1.050 0.940 2008-Aug-27 03:10:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.914 1.055 0.947 2008-Aug-27 03:10:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.099 1.031 0.110 2008-Aug-27 03:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-27 03:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-27 03:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-27 03:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-27 03:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-27 03:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Aug-27 03:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-27 03:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 03:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:11:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:11:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.117 1.080 1.060 2008-Aug-27 03:11:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.944 1.049 0.937 2008-Aug-27 03:11:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.912 1.051 0.945 2008-Aug-27 03:11:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.032 0.109 2008-Aug-27 03:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Aug-27 03:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-27 03:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-27 03:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-27 03:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-27 03:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-27 03:12:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:12:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 03:12:31 LOG5 end_task: Level: (3) ID = <10243> Status = 0 0 0 0 ok 2008-Aug-27 03:12:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 03:12:31 LOG5 end_task: Level: (2) ID = <10242> Status = 0 0 0 0 ok 2008-Aug-27 03:12:31 LOG1 fixed_driftmap: New position: year = 2008.6574502180142 RA = 01:08:36.9 RA/Dec = 01:09:05.5 +04:18:29.1 2008-Aug-27 03:12:31 NOTE fixed_driftmap: Correcting ZA to 14:02:44.6 ... 2008-Aug-27 03:12:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0457352780 -CF 2008-Aug-27 03:12:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 03:12:31 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 03:12:31 LOG5 begin_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2008-Aug-27 03:12:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 03:12:31 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 03:12:31 LOG5 begin_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2008-Aug-27 03:12:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 03:12:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 03:12:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:12:31 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 03:12:31 LOG5 begin_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Aug-27 03:12:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0457352780 -CF 2008-Aug-27 03:12:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:12:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 03:12:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:12:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:12:31 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 03:12:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 03:12:31 LOG5 end_task: Level: (4) ID = <10246> Status = 0 0 0 0 ok 2008-Aug-27 03:12:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 03:12:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 03:12:31 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 03:12:31 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 03:12:31 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Aug-27 03:12:31 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:12:31 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 03:12:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 03:12:31 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2008-Aug-27 03:12:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 03:12:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 03:12:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 03:12:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 03:12:32 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 03:12:32 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2008-Aug-27 03:12:32 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 03:12:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 03:12:32 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2008-Aug-27 03:12:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 03:12:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 03:12:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 03:12:32 LOG5 end_task: Level: (3) ID = <10245> Status = 0 0 0 0 ok 2008-Aug-27 03:12:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 03:12:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 03:12:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 03:12:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 03:12:32 LOG5 begin_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Aug-27 03:12:32 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 03:12:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 03:12:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 03:12:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 03:12:32 LOG5 end_task: Level: (3) ID = <10249> Status = 0 0 0 0 ok 2008-Aug-27 03:12:32 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 03:12:32 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 03:12:32 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 03:12:32 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Aug-27 03:12:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 03:12:32 INFO2 take_data: Starting WAPP scan: 824000038 2008-Aug-27 03:12:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 03:12:32 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 03:12:32 LOG5 begin_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Aug-27 03:12:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:12:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25953.00 2008-Aug-27 03:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-27 03:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:12:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:12:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 03:12:34 LOG5 end_task: Level: (4) ID = <10251> Status = 0 0 0 0 ok 2008-Aug-27 03:12:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 03:12:34 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2008-Aug-27 03:12:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 03:12:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 03:12:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 03:12:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 03:12:34 LOG5 begin_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2008-Aug-27 03:12:34 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 03:12:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 03:12:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 03:12:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 03:12:34 LOG5 end_task: Level: (3) ID = <10252> Status = 0 0 0 0 ok 2008-Aug-27 03:12:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 03:12:35 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 03:12:35 LOG5 finish_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2008-Aug-27 03:12:35 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 03:12:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 03:12:35 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 03:12:35 LOG5 end_task: Level: (2) ID = <10244> Status = 0 0 0 0 ok 2008-Aug-27 03:12:35 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 20 of 99 2008-Aug-27 03:12:35 LOG4 send_obs_status: To obs_status: <1> LOOP 20 2008-Aug-27 03:12:35 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:12:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:12:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:12:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:12:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 03:12:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 03:12:35 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 03:12:35 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 03:12:35 LOG5 begin_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2008-Aug-27 03:12:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 03:12:35 INFO2 take_data: Starting WAPP scan: 824000039 2008-Aug-27 03:12:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 03:12:35 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 03:12:35 LOG5 begin_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2008-Aug-27 03:12:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 03:12:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.502 (still bad) 2008-Aug-27 03:12:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 25956.00 2008-Aug-27 03:12:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0018.fits 2008-Aug-27 03:12:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0018.fits} 2008-Aug-27 03:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-27 03:12:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 03:12:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.114 1.075 1.055 2008-Aug-27 03:12:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.943 1.048 0.937 2008-Aug-27 03:12:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.911 1.048 0.943 2008-Aug-27 03:12:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.099 1.031 0.110 2008-Aug-27 03:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-27 03:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.112 (still bad) 2008-Aug-27 03:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:13:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:13:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.116 1.078 1.056 2008-Aug-27 03:13:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.943 1.044 0.934 2008-Aug-27 03:13:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.912 1.051 0.944 2008-Aug-27 03:13:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.032 0.109 2008-Aug-27 03:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 03:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 03:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 03:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:14:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:14:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.118 1.077 1.056 2008-Aug-27 03:14:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.944 1.046 0.936 2008-Aug-27 03:14:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.912 1.052 0.942 2008-Aug-27 03:14:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.031 0.109 2008-Aug-27 03:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 03:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 03:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 03:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 03:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:15:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:15:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.138 1.077 1.057 2008-Aug-27 03:15:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.950 1.049 0.943 2008-Aug-27 03:15:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.910 1.055 0.946 2008-Aug-27 03:15:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.031 0.109 2008-Aug-27 03:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-27 03:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-27 03:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-27 03:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Aug-27 03:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-27 03:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-27 03:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-27 03:16:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 03:16:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.133 1.078 1.057 2008-Aug-27 03:16:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.951 1.053 0.947 2008-Aug-27 03:16:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.088 0.913 1.054 0.949 2008-Aug-27 03:16:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.099 1.031 0.110 2008-Aug-27 03:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-27 03:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-27 03:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-27 03:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-27 03:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:17:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-27 03:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:17:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Aug-27 03:17:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-27 03:17:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:17:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:17:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:17:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Aug-27 03:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-27 03:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 03:17:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:17:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.125 1.079 1.057 2008-Aug-27 03:17:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.949 1.049 0.943 2008-Aug-27 03:17:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.912 1.054 0.948 2008-Aug-27 03:17:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.033 0.110 2008-Aug-27 03:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-27 03:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-27 03:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Aug-27 03:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-27 03:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 03:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-27 03:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Aug-27 03:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Aug-27 03:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-27 03:18:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:18:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.125 1.078 1.057 2008-Aug-27 03:18:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.947 1.050 0.942 2008-Aug-27 03:18:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.910 1.051 0.947 2008-Aug-27 03:18:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.032 0.109 2008-Aug-27 03:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 03:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-27 03:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-27 03:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-27 03:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 03:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-27 03:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 03:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:19:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:19:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.122 1.077 1.058 2008-Aug-27 03:19:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.949 1.048 0.941 2008-Aug-27 03:19:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.913 1.051 0.947 2008-Aug-27 03:19:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.035 0.109 2008-Aug-27 03:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-27 03:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-27 03:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-27 03:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-27 03:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:20:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:20:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.076 1.121 1.078 1.060 2008-Aug-27 03:20:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.952 1.049 0.941 2008-Aug-27 03:20:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.914 1.051 0.948 2008-Aug-27 03:20:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.035 0.109 2008-Aug-27 03:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 03:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.143 (still bad) 2008-Aug-27 03:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 03:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-27 03:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:21:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 03:21:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.116 1.078 1.057 2008-Aug-27 03:21:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.949 1.045 0.937 2008-Aug-27 03:21:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.912 1.051 0.946 2008-Aug-27 03:21:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.099 1.033 0.110 2008-Aug-27 03:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-27 03:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.136 (still bad) 2008-Aug-27 03:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.140 (still bad) 2008-Aug-27 03:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-27 03:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.138 (still bad) 2008-Aug-27 03:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:22:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-27 03:22:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 03:22:36 LOG5 end_task: Level: (3) ID = <10254> Status = 0 0 0 0 ok 2008-Aug-27 03:22:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 03:22:36 LOG5 end_task: Level: (2) ID = <10253> Status = 0 0 0 0 ok 2008-Aug-27 03:22:36 LOG1 fixed_driftmap: New position: year = 2008.6574693893072 RA = 01:18:43.6 RA/Dec = 01:19:12.1 +04:18:26.8 2008-Aug-27 03:22:36 NOTE fixed_driftmap: Correcting ZA to 14:02:46.9 ... 2008-Aug-27 03:22:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0463577923 -CF 2008-Aug-27 03:22:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 03:22:36 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 03:22:36 LOG5 begin_task: Level: (2) ID = <10255> Status = 0 0 0 0 ok 2008-Aug-27 03:22:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 03:22:36 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 03:22:36 LOG5 begin_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2008-Aug-27 03:22:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 03:22:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 03:22:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:22:36 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 03:22:36 LOG5 begin_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-Aug-27 03:22:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0463577923 -CF 2008-Aug-27 03:22:36 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:22:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 03:22:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:22:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:22:37 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 03:22:37 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 03:22:37 LOG5 end_task: Level: (4) ID = <10257> Status = 0 0 0 0 ok 2008-Aug-27 03:22:37 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 03:22:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 03:22:37 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 03:22:37 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 03:22:37 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Aug-27 03:22:37 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:22:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 03:22:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 03:22:38 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2008-Aug-27 03:22:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 03:22:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 03:22:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 03:22:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 03:22:38 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 03:22:38 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2008-Aug-27 03:22:38 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 03:22:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 03:22:38 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2008-Aug-27 03:22:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 03:22:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 03:22:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 03:22:38 LOG5 end_task: Level: (3) ID = <10256> Status = 0 0 0 0 ok 2008-Aug-27 03:22:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 03:22:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 03:22:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 03:22:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 03:22:38 LOG5 begin_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2008-Aug-27 03:22:38 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 03:22:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 03:22:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 03:22:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 03:22:38 LOG5 end_task: Level: (3) ID = <10260> Status = 0 0 0 0 ok 2008-Aug-27 03:22:38 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 03:22:38 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 03:22:38 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 03:22:38 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Aug-27 03:22:38 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 03:22:38 INFO2 take_data: Starting WAPP scan: 824000040 2008-Aug-27 03:22:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 03:22:39 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 03:22:39 LOG5 begin_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Aug-27 03:22:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-27 03:22:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26560.00 2008-Aug-27 03:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:22:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.508 (still bad) 2008-Aug-27 03:22:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:22:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 03:22:41 LOG5 end_task: Level: (4) ID = <10262> Status = 0 0 0 0 ok 2008-Aug-27 03:22:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 03:22:41 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2008-Aug-27 03:22:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 03:22:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 03:22:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 03:22:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 03:22:41 LOG5 begin_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2008-Aug-27 03:22:41 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 03:22:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 03:22:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 03:22:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 03:22:41 LOG5 end_task: Level: (3) ID = <10263> Status = 0 0 0 0 ok 2008-Aug-27 03:22:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 03:22:41 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 03:22:41 LOG5 finish_task: Level: (2) ID = <10255> Status = 0 0 0 0 ok 2008-Aug-27 03:22:41 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 03:22:41 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 03:22:41 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 03:22:41 LOG5 end_task: Level: (2) ID = <10255> Status = 0 0 0 0 ok 2008-Aug-27 03:22:41 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 21 of 99 2008-Aug-27 03:22:41 LOG4 send_obs_status: To obs_status: <1> LOOP 21 2008-Aug-27 03:22:42 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:22:42 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:22:42 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:22:42 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:22:42 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 03:22:42 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 03:22:42 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 03:22:42 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 03:22:42 LOG5 begin_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2008-Aug-27 03:22:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 03:22:42 INFO2 take_data: Starting WAPP scan: 824000041 2008-Aug-27 03:22:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 03:22:42 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 03:22:42 LOG5 begin_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Aug-27 03:22:42 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 03:22:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:22:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 26563.00 2008-Aug-27 03:22:42 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0019.fits 2008-Aug-27 03:22:42 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0019.fits} 2008-Aug-27 03:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.508 (still bad) 2008-Aug-27 03:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:22:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Aug-27 03:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-27 03:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:22:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:22:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.120 1.078 1.058 2008-Aug-27 03:22:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.948 1.049 0.942 2008-Aug-27 03:22:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.912 1.049 0.946 2008-Aug-27 03:22:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.032 0.109 2008-Aug-27 03:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.139 (still bad) 2008-Aug-27 03:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-27 03:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Aug-27 03:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.135 (still bad) 2008-Aug-27 03:23:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-27 03:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 03:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2008-Aug-27 03:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-27 03:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-27 03:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2008-Aug-27 03:23:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:23:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:23:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-27 03:23:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 03:23:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.119 1.080 1.061 2008-Aug-27 03:23:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.946 1.044 0.937 2008-Aug-27 03:23:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.914 1.051 0.944 2008-Aug-27 03:23:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.950 0.099 1.034 0.109 2008-Aug-27 03:24:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:24:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.132 (still bad) 2008-Aug-27 03:24:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:24:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:24:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-27 03:24:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-27 03:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-27 03:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-27 03:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:24:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.114 (still bad) 2008-Aug-27 03:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2008-Aug-27 03:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-27 03:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:25:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 03:25:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.117 1.078 1.059 2008-Aug-27 03:25:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.948 1.045 0.937 2008-Aug-27 03:25:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.912 1.051 0.945 2008-Aug-27 03:25:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.099 1.034 0.110 2008-Aug-27 03:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 03:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-27 03:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2008-Aug-27 03:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:25:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2008-Aug-27 03:25:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:25:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:25:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:25:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:25:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:25:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2008-Aug-27 03:25:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.150 (still bad) 2008-Aug-27 03:25:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.210 (still bad) 2008-Aug-27 03:25:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.273 (still bad) 2008-Aug-27 03:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.350 (still bad) 2008-Aug-27 03:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.365 (still bad) 2008-Aug-27 03:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.344 (still bad) 2008-Aug-27 03:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.295 (still bad) 2008-Aug-27 03:26:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 03:26:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.132 1.231 1.215 2008-Aug-27 03:26:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.959 1.049 0.939 2008-Aug-27 03:26:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.914 1.056 0.949 2008-Aug-27 03:26:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.099 1.033 0.110 2008-Aug-27 03:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.165 (still bad) 2008-Aug-27 03:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2008-Aug-27 03:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 03:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.130 (still bad) 2008-Aug-27 03:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-27 03:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-27 03:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-27 03:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-27 03:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.129 (still bad) 2008-Aug-27 03:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.133 (still bad) 2008-Aug-27 03:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-27 03:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-27 03:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-27 03:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.125 (still bad) 2008-Aug-27 03:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.131 (still bad) 2008-Aug-27 03:26:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:26:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:26:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-27 03:26:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:26:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2008-Aug-27 03:26:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 03:26:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-27 03:26:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:26:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-27 03:27:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:27:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:27:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.081 1.124 1.078 1.057 2008-Aug-27 03:27:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.953 1.051 0.943 2008-Aug-27 03:27:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.924 1.065 0.958 2008-Aug-27 03:27:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.031 0.109 2008-Aug-27 03:27:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:27:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 03:27:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 03:27:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.157 (still bad) 2008-Aug-27 03:27:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.164 (still bad) 2008-Aug-27 03:27:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.170 (still bad) 2008-Aug-27 03:27:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.178 (still bad) 2008-Aug-27 03:27:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.169 (still bad) 2008-Aug-27 03:27:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.162 (still bad) 2008-Aug-27 03:27:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 03:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 03:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:27:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 03:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.154 (still bad) 2008-Aug-27 03:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 03:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 03:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2008-Aug-27 03:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.126 (still bad) 2008-Aug-27 03:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.128 (still bad) 2008-Aug-27 03:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.155 (still bad) 2008-Aug-27 03:28:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:28:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.085 1.133 1.077 1.057 2008-Aug-27 03:28:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.954 1.049 0.947 2008-Aug-27 03:28:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.914 1.054 0.950 2008-Aug-27 03:28:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.031 0.109 2008-Aug-27 03:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:28:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.127 (still bad) 2008-Aug-27 03:28:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:28:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:28:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 03:28:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:28:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:28:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:28:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:28:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:28:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 03:28:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 03:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.115 (still bad) 2008-Aug-27 03:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.113 (still bad) 2008-Aug-27 03:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:29:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:29:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.117 1.076 1.056 2008-Aug-27 03:29:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.948 1.044 0.937 2008-Aug-27 03:29:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.913 1.051 0.945 2008-Aug-27 03:29:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.032 0.109 2008-Aug-27 03:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:29:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:29:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:29:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2008-Aug-27 03:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 03:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:30:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:30:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.121 1.076 1.056 2008-Aug-27 03:30:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.950 1.047 0.942 2008-Aug-27 03:30:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.910 1.050 0.944 2008-Aug-27 03:30:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.944 0.098 1.032 0.109 2008-Aug-27 03:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:30:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:31:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:31:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:31:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:31:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:31:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.119 1.078 1.057 2008-Aug-27 03:31:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.947 1.048 0.939 2008-Aug-27 03:31:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.914 1.051 0.946 2008-Aug-27 03:31:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.098 1.031 0.109 2008-Aug-27 03:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.120 (still bad) 2008-Aug-27 03:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 03:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 03:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:32:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:32:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.078 1.124 1.076 1.057 2008-Aug-27 03:32:11 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.951 1.050 0.941 2008-Aug-27 03:32:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.910 1.051 0.947 2008-Aug-27 03:32:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.949 0.098 1.037 0.109 2008-Aug-27 03:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:32:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:32:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 03:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:32:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:32:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 03:32:43 LOG5 end_task: Level: (3) ID = <10265> Status = 0 0 0 0 ok 2008-Aug-27 03:32:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 03:32:43 LOG5 end_task: Level: (2) ID = <10264> Status = 0 0 0 0 ok 2008-Aug-27 03:32:43 LOG1 fixed_driftmap: New position: year = 2008.6574886239766 RA = 01:28:52.2 RA/Dec = 01:29:20.8 +04:18:24.2 2008-Aug-27 03:32:43 NOTE fixed_driftmap: Correcting ZA to 14:02:49.5 ... 2008-Aug-27 03:32:43 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0470744033 -CF 2008-Aug-27 03:32:43 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 03:32:43 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 03:32:43 LOG5 begin_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2008-Aug-27 03:32:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 03:32:43 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 03:32:43 LOG5 begin_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2008-Aug-27 03:32:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 03:32:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 03:32:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:32:43 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 03:32:43 LOG5 begin_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Aug-27 03:32:43 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0470744033 -CF 2008-Aug-27 03:32:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:32:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 03:32:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:32:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:32:43 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 03:32:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 03:32:43 LOG5 end_task: Level: (4) ID = <10268> Status = 0 0 0 0 ok 2008-Aug-27 03:32:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 03:32:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 03:32:43 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 03:32:43 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 03:32:43 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2008-Aug-27 03:32:43 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:32:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 03:32:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 03:32:44 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2008-Aug-27 03:32:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 03:32:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 03:32:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 03:32:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 03:32:44 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 03:32:44 LOG5 begin_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2008-Aug-27 03:32:44 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 03:32:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 03:32:44 LOG5 end_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2008-Aug-27 03:32:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 03:32:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 03:32:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 03:32:44 LOG5 end_task: Level: (3) ID = <10267> Status = 0 0 0 0 ok 2008-Aug-27 03:32:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 03:32:44 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 03:32:44 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 03:32:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 03:32:44 LOG5 begin_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-Aug-27 03:32:44 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 03:32:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 03:32:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 03:32:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 03:32:44 LOG5 end_task: Level: (3) ID = <10271> Status = 0 0 0 0 ok 2008-Aug-27 03:32:44 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 03:32:44 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 03:32:44 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 03:32:44 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Aug-27 03:32:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 03:32:44 INFO2 take_data: Starting WAPP scan: 824000042 2008-Aug-27 03:32:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 03:32:45 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 03:32:45 LOG5 begin_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2008-Aug-27 03:32:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:32:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27166.00 2008-Aug-27 03:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.506 (still bad) 2008-Aug-27 03:32:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:32:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 03:32:47 LOG5 end_task: Level: (4) ID = <10273> Status = 0 0 0 0 ok 2008-Aug-27 03:32:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 03:32:47 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2008-Aug-27 03:32:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 03:32:47 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 03:32:47 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 03:32:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 03:32:47 LOG5 begin_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Aug-27 03:32:47 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 03:32:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 03:32:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 03:32:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 03:32:47 LOG5 end_task: Level: (3) ID = <10274> Status = 0 0 0 0 ok 2008-Aug-27 03:32:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 03:32:47 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 03:32:47 LOG5 finish_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2008-Aug-27 03:32:47 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 03:32:47 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 03:32:47 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 03:32:47 LOG5 end_task: Level: (2) ID = <10266> Status = 0 0 0 0 ok 2008-Aug-27 03:32:47 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 22 of 99 2008-Aug-27 03:32:47 LOG4 send_obs_status: To obs_status: <1> LOOP 22 2008-Aug-27 03:32:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:32:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:32:48 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:32:48 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:32:48 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 03:32:48 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 03:32:48 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 03:32:48 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 03:32:48 LOG5 begin_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2008-Aug-27 03:32:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 03:32:48 INFO2 take_data: Starting WAPP scan: 824000043 2008-Aug-27 03:32:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 03:32:48 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 03:32:48 LOG5 begin_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Aug-27 03:32:48 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 03:32:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:32:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27169.00 2008-Aug-27 03:32:48 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0020.fits 2008-Aug-27 03:32:48 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0020.fits} 2008-Aug-27 03:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.506 (still bad) 2008-Aug-27 03:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:32:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:33:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:33:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.077 1.120 1.082 1.062 2008-Aug-27 03:33:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.950 1.047 0.939 2008-Aug-27 03:33:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.914 1.051 0.946 2008-Aug-27 03:33:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.098 1.030 0.109 2008-Aug-27 03:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 03:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 03:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 03:33:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:33:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:33:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 03:33:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:33:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:33:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 03:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 03:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.153 (still bad) 2008-Aug-27 03:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 03:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:34:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:34:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.133 1.078 1.057 2008-Aug-27 03:34:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.936 0.955 1.052 0.952 2008-Aug-27 03:34:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.918 1.077 0.971 2008-Aug-27 03:34:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.032 0.109 2008-Aug-27 03:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 03:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 03:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 03:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 03:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 03:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 03:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 03:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 03:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 03:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.168 (still bad) 2008-Aug-27 03:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.167 (still bad) 2008-Aug-27 03:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.169 (still bad) 2008-Aug-27 03:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.184 (still bad) 2008-Aug-27 03:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.228 (still bad) 2008-Aug-27 03:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.272 (still bad) 2008-Aug-27 03:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.321 (still bad) 2008-Aug-27 03:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.334 (still bad) 2008-Aug-27 03:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.316 (still bad) 2008-Aug-27 03:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.276 (still bad) 2008-Aug-27 03:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.221 (still bad) 2008-Aug-27 03:35:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.280 (still bad) 2008-Aug-27 03:35:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.384 (still bad) 2008-Aug-27 03:35:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.489 (still bad) 2008-Aug-27 03:35:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.587 (still bad) 2008-Aug-27 03:35:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.647 (still bad) 2008-Aug-27 03:35:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.653 (still bad) 2008-Aug-27 03:35:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.602 (still bad) 2008-Aug-27 03:35:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:35:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.428 1.513 1.091 1.071 2008-Aug-27 03:35:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.983 1.009 1.291 1.172 2008-Aug-27 03:35:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.928 1.066 0.970 2008-Aug-27 03:35:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.032 0.109 2008-Aug-27 03:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.384 (still bad) 2008-Aug-27 03:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.274 (still bad) 2008-Aug-27 03:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.185 (still bad) 2008-Aug-27 03:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 03:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 03:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 03:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.159 (still bad) 2008-Aug-27 03:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.154 (still bad) 2008-Aug-27 03:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 03:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 03:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.146 (still bad) 2008-Aug-27 03:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 03:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 03:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:36:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.162 (still bad) 2008-Aug-27 03:36:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 03:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 03:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.153 (still bad) 2008-Aug-27 03:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.190 (still bad) 2008-Aug-27 03:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.166 (still bad) 2008-Aug-27 03:36:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:36:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.103 1.158 1.077 1.061 2008-Aug-27 03:36:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.962 1.058 0.963 2008-Aug-27 03:36:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.917 1.061 0.963 2008-Aug-27 03:36:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.098 1.031 0.109 2008-Aug-27 03:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.155 (still bad) 2008-Aug-27 03:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 03:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 03:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.160 (still bad) 2008-Aug-27 03:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 03:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.158 (still bad) 2008-Aug-27 03:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 03:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.158 (still bad) 2008-Aug-27 03:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.157 (still bad) 2008-Aug-27 03:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:37:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:37:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.159 (still bad) 2008-Aug-27 03:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 03:37:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:37:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.132 1.080 1.060 2008-Aug-27 03:37:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.962 1.057 0.963 2008-Aug-27 03:37:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.091 0.917 1.062 0.964 2008-Aug-27 03:37:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.032 0.109 2008-Aug-27 03:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.157 (still bad) 2008-Aug-27 03:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.137 (still bad) 2008-Aug-27 03:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 03:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 03:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 03:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 03:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 03:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 03:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 03:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 03:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 03:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 03:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 03:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:38:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:38:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.129 1.080 1.060 2008-Aug-27 03:38:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.937 0.960 1.057 0.962 2008-Aug-27 03:38:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 0.918 1.060 0.965 2008-Aug-27 03:38:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.948 0.098 1.033 0.109 2008-Aug-27 03:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 03:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 03:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 03:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 03:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 03:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 03:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 03:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 03:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 03:39:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 03:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 03:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 03:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 03:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:39:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:39:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.135 1.079 1.059 2008-Aug-27 03:39:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.963 1.059 0.965 2008-Aug-27 03:39:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 0.921 1.060 0.968 2008-Aug-27 03:39:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.033 0.109 2008-Aug-27 03:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.159 (still bad) 2008-Aug-27 03:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 03:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 03:39:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:39:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:39:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:39:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.157 (still bad) 2008-Aug-27 03:39:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.143 (still bad) 2008-Aug-27 03:39:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 03:39:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:39:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:39:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:39:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 03:39:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.141 (still bad) 2008-Aug-27 03:39:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.139 (still bad) 2008-Aug-27 03:39:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 03:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 03:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.156 (still bad) 2008-Aug-27 03:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.144 (still bad) 2008-Aug-27 03:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 03:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 03:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 03:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 03:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.140 (still bad) 2008-Aug-27 03:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 03:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:40:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:40:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.131 1.076 1.060 2008-Aug-27 03:40:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.941 0.965 1.054 0.958 2008-Aug-27 03:40:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.917 1.060 0.968 2008-Aug-27 03:40:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.947 0.098 1.032 0.109 2008-Aug-27 03:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.147 (still bad) 2008-Aug-27 03:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.138 (still bad) 2008-Aug-27 03:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 03:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.145 (still bad) 2008-Aug-27 03:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.149 (still bad) 2008-Aug-27 03:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 03:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.151 (still bad) 2008-Aug-27 03:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.135 (still bad) 2008-Aug-27 03:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.134 (still bad) 2008-Aug-27 03:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.142 (still bad) 2008-Aug-27 03:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:41:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:41:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.079 1.129 1.078 1.058 2008-Aug-27 03:41:25 LOG4 check_wapp_levels: WAPP-2 power levels: 0.939 0.961 1.058 0.961 2008-Aug-27 03:41:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.918 1.056 0.965 2008-Aug-27 03:41:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.031 0.109 2008-Aug-27 03:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.137 (still bad) 2008-Aug-27 03:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.130 (still bad) 2008-Aug-27 03:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.136 (still bad) 2008-Aug-27 03:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.133 (still bad) 2008-Aug-27 03:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.128 (still bad) 2008-Aug-27 03:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.131 (still bad) 2008-Aug-27 03:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:42:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:42:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 1.122 1.077 1.060 2008-Aug-27 03:42:28 LOG4 check_wapp_levels: WAPP-2 power levels: 0.938 0.957 1.048 0.948 2008-Aug-27 03:42:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.920 1.060 0.966 2008-Aug-27 03:42:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.945 0.098 1.031 0.110 2008-Aug-27 03:42:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.129 (still bad) 2008-Aug-27 03:42:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:42:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.126 (still bad) 2008-Aug-27 03:42:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:42:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:42:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.148 (still bad) 2008-Aug-27 03:42:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.127 (still bad) 2008-Aug-27 03:42:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:42:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:42:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.121 (still bad) 2008-Aug-27 03:42:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:42:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 03:42:49 LOG5 end_task: Level: (3) ID = <10276> Status = 0 0 0 0 ok 2008-Aug-27 03:42:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 03:42:49 LOG5 end_task: Level: (2) ID = <10275> Status = 0 0 0 0 ok 2008-Aug-27 03:42:49 LOG1 fixed_driftmap: New position: year = 2008.6575078269577 RA = 01:38:59.9 RA/Dec = 01:39:28.5 +04:18:21.3 2008-Aug-27 03:42:49 NOTE fixed_driftmap: Correcting ZA to 14:02:52.4 ... 2008-Aug-27 03:42:49 LOG3 vw_send: To DATATAKING: pnt tr -UD 360.0 14.0478803979 -CF 2008-Aug-27 03:42:49 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2008-Aug-27 03:42:49 START begin_task: Starting task 'WAPP calibration' 2008-Aug-27 03:42:49 LOG5 begin_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2008-Aug-27 03:42:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2008-Aug-27 03:42:49 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 03:42:49 LOG5 begin_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2008-Aug-27 03:42:49 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 03:42:49 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 03:42:49 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:42:49 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 03:42:49 LOG5 begin_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Aug-27 03:42:49 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 360.0 14.0478803979 -CF 2008-Aug-27 03:42:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:42:49 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 03:42:49 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:42:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:42:49 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 03:42:49 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 03:42:49 LOG5 end_task: Level: (4) ID = <10279> Status = 0 0 0 0 ok 2008-Aug-27 03:42:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 03:42:49 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 03:42:49 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 03:42:49 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 03:42:49 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Aug-27 03:42:49 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:42:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:42:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 03:42:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 03:42:51 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2008-Aug-27 03:42:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 03:42:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 03:42:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 03:42:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 03:42:51 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 03:42:51 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Aug-27 03:42:51 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 03:42:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 03:42:51 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2008-Aug-27 03:42:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 03:42:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 03:42:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 03:42:51 LOG5 end_task: Level: (3) ID = <10278> Status = 0 0 0 0 ok 2008-Aug-27 03:42:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2008-Aug-27 03:42:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 03:42:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 03:42:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 03:42:51 LOG5 begin_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2008-Aug-27 03:42:51 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 03:42:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 03:42:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 03:42:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 03:42:51 LOG5 end_task: Level: (3) ID = <10282> Status = 0 0 0 0 ok 2008-Aug-27 03:42:51 LOG4 send_obs_status: To obs_status: <0> MESSAGE {Taking CAL-ON spectra ...} 2008-Aug-27 03:42:51 LOG4 take_data: Calling 'take_data 1 1 CAL ON -' 2008-Aug-27 03:42:51 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 03:42:51 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Aug-27 03:42:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 03:42:51 INFO2 take_data: Starting WAPP scan: 824000044 2008-Aug-27 03:42:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 2008-Aug-27 03:42:51 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 03:42:51 LOG5 begin_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2008-Aug-27 03:42:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:42:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27772.00 2008-Aug-27 03:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:42:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.518 (still bad) 2008-Aug-27 03:42:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:42:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2008-Aug-27 03:42:53 LOG5 end_task: Level: (4) ID = <10284> Status = 0 0 0 0 ok 2008-Aug-27 03:42:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2008-Aug-27 03:42:53 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2008-Aug-27 03:42:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 03:42:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 03:42:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 03:42:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 03:42:53 LOG5 begin_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2008-Aug-27 03:42:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 03:42:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 03:42:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 03:42:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 03:42:54 LOG5 end_task: Level: (3) ID = <10285> Status = 0 0 0 0 ok 2008-Aug-27 03:42:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 03:42:54 STOP finish_task: Finishing task 'WAPP calibration' 2008-Aug-27 03:42:54 LOG5 finish_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2008-Aug-27 03:42:54 INFO2 finish_task: DONE finished calibration: WAPP calibration 2008-Aug-27 03:42:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 03:42:54 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2008-Aug-27 03:42:54 LOG5 end_task: Level: (2) ID = <10277> Status = 0 0 0 0 ok 2008-Aug-27 03:42:54 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 23 of 99 2008-Aug-27 03:42:54 LOG4 send_obs_status: To obs_status: <1> LOOP 23 2008-Aug-27 03:42:54 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:42:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:42:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:42:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:42:54 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2008-Aug-27 03:42:54 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_drift MESSAGE {Taking drift scan ...} 2008-Aug-27 03:42:54 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ -' 2008-Aug-27 03:42:54 START begin_task: Starting task 'WAPP spectral observation' 2008-Aug-27 03:42:54 LOG5 begin_task: Level: (2) ID = <10286> Status = 0 0 0 0 ok 2008-Aug-27 03:42:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2008-Aug-27 03:42:54 INFO2 take_data: Starting WAPP scan: 824000045 2008-Aug-27 03:42:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 2008-Aug-27 03:42:54 START begin_task: Starting task 'waiting on WAPP spectra' 2008-Aug-27 03:42:54 LOG5 begin_task: Level: (3) ID = <10287> Status = 0 0 0 0 ok 2008-Aug-27 03:42:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 03:42:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:42:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27775.00 2008-Aug-27 03:42:54 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0021.fits 2008-Aug-27 03:42:54 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0021.fits} 2008-Aug-27 03:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.518 (still bad) 2008-Aug-27 03:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:42:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.124 (still bad) 2008-Aug-27 03:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.123 (still bad) 2008-Aug-27 03:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.132 (still bad) 2008-Aug-27 03:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.125 (still bad) 2008-Aug-27 03:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:43:09 COMMAND CIMA-send_to_exec: Sending command to abort observation 2008-Aug-27 03:43:09 LOG4 exec_msg: From OBSERVER: abort_task abort 2008-Aug-27 03:43:09 WARNING abort_task: WARNING abort requested! 2008-Aug-27 03:43:09 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2008-Aug-27 03:43:09 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2008-Aug-27 03:43:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2008-Aug-27 03:43:10 LOG5 end_task: Level: (3) ID = <10287> Status = 1 0 0 0 abort 2008-Aug-27 03:43:10 START begin_task: Starting task 'stopping the WAPPs' 2008-Aug-27 03:43:10 LOG5 begin_task: Level: (3) ID = <10288> Status = 1 0 0 0 abort 2008-Aug-27 03:43:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2008-Aug-27 03:43:10 INFO1 stop_wapp: Stopping the WAPPs 2008-Aug-27 03:43:10 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2008-Aug-27 03:43:10 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2008-Aug-27 03:43:10 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2008-Aug-27 03:43:10 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2008-Aug-27 03:43:10 START begin_task: Starting task 'waiting on stopping WAPPs' 2008-Aug-27 03:43:10 LOG5 begin_task: Level: (4) ID = <10289> Status = 1 0 0 0 abort 2008-Aug-27 03:43:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2008-Aug-27 03:43:11 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2008-Aug-27 03:43:11 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2008-Aug-27 03:43:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:43:11 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2008-Aug-27 03:43:11 LOG5 end_task: Level: (4) ID = <10289> Status = 1 0 0 0 abort 2008-Aug-27 03:43:11 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2008-Aug-27 03:43:11 LOG5 end_task: Level: (3) ID = <10288> Status = 1 0 0 0 abort 2008-Aug-27 03:43:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2008-Aug-27 03:43:11 LOG5 end_task: Level: (2) ID = <10286> Status = 1 0 0 0 abort 2008-Aug-27 03:43:11 STOP finish_task: Finishing task 'fixed azimuth drift map' 2008-Aug-27 03:43:11 LOG5 finish_task: Level: (1) ID = <10029> Status = 1 0 0 0 abort 2008-Aug-27 03:43:11 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2008-Aug-27 03:43:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2008-Aug-27 03:43:11 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2008-Aug-27 03:43:11 LOG5 end_task: Level: (1) ID = <10029> Status = 1 0 0 0 abort 2008-Aug-27 03:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.122 (still bad) 2008-Aug-27 03:43:20 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2008-Aug-27 03:43:20 LOG4 exec_msg: From OBSERVER: restart_wapp 2008-Aug-27 03:43:20 LOG5 restart_wapp: Calling 'restart_wapp' 2008-Aug-27 03:43:20 BEGIN begin_task: Starting task 'restarting the WAPPs' 2008-Aug-27 03:43:20 LOG5 begin_task: Level: (1) ID = <10290> Status = 0 0 0 0 ok 2008-Aug-27 03:43:20 NOTE restart_wapp: Restarting all WAPPs 2008-Aug-27 03:43:20 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2008-Aug-27 03:43:20 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2008-Aug-27 03:43:20 LOG5 end_task: Level: (1) ID = <10290> Status = 0 0 0 0 ok 2008-Aug-27 03:43:20 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Aug-27 03:43:21 LOG3 exec_msg: Closing socket 2008-Aug-27 03:43:21 LOG3 exec_msg: Closing socket 2008-Aug-27 03:43:21 LOG3 exec_msg: Closing socket 2008-Aug-27 03:43:21 LOG3 exec_msg: Closing socket 2008-Aug-27 03:43:23 ALERT WAPP=3-wappcon: WAPP3 restarting 2008-Aug-27 03:43:23 ALERT WAPP=4-wappcon: WAPP4 restarting 2008-Aug-27 03:43:23 ALERT WAPP=1-wappcon: WAPP1 restarting 2008-Aug-27 03:43:23 ALERT WAPP=2-wappcon: WAPP2 restarting 2008-Aug-27 03:43:33 WARNING CIMA-find_command_files: WARNING file 'a2010.cat.save' in directory '/share/obs4/usr/a2010' is not readable! 2008-Aug-27 03:43:48 INFO1 CIMA-run_command_file: Transferring command file 'command_galfacurpos ' to executive ... 2008-Aug-27 03:43:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 6 {LOAD togs.conf} 2008-Aug-27 03:43:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 7 {TRACKCURPOS} 2008-Aug-27 03:43:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 8 {ALFAANGLE 19} 2008-Aug-27 03:43:49 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 12 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2008-Aug-27 03:43:49 COMMAND CIMA-send_to_exec: Sending command to run command file 2008-Aug-27 03:43:49 LOG4 exec_msg: From OBSERVER: run_command_file command_galfacurpos 1 1 4 2008-Aug-27 03:43:49 LOG4 run_command_file: Calling 'run_command_file command_galfacurpos 1 1 4' 2008-Aug-27 03:43:49 BEGIN begin_task: Starting task 'running command file 'command_galfacurpos'' 2008-Aug-27 03:43:49 LOG5 begin_task: Level: (1) ID = <10291> Status = 0 0 0 0 ok 2008-Aug-27 03:43:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfacurpos' ...} 2008-Aug-27 03:43:49 NOTE run_command_file: Starting execution of command file 'command_galfacurpos' from line 1 2008-Aug-27 03:43:49 COMMAND run_command_line: EXECUTING command 6: 'LOAD togs.conf' 2008-Aug-27 03:43:49 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2008-Aug-27 03:43:49 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-27 03:43:49 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2008-Aug-27 03:43:49 NOTE CIMA-load_config_file: Loading configuration file 'togs.conf' 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2008-Aug-27 03:43:50 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-27 03:43:51 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-27 03:43:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2008-Aug-27 03:43:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2008-Aug-27 03:43:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2008-Aug-27 03:43:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2008-Aug-27 03:43:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2008-Aug-27 03:43:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2008-Aug-27 03:43:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2008-Aug-27 03:43:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2008-Aug-27 03:43:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2008-Aug-27 03:43:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2008-Aug-27 03:43:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2008-Aug-27 03:43:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2008-Aug-27 03:43:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2008-Aug-27 03:43:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2008-Aug-27 03:43:52 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2008-Aug-27 03:43:52 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-27 03:43:52 BEGIN begin_task: Starting task 'configuring IF/LO path' 2008-Aug-27 03:43:52 LOG5 begin_task: Level: (2) ID = <10292> Status = 0 0 0 0 ok 2008-Aug-27 03:43:52 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2008-Aug-27 03:43:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2008-Aug-27 03:43:52 LOG1 config_iflo: Receiver ALFA already selected 2008-Aug-27 03:43:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 03:43:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 03:43:52 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 03:43:52 LOG5 begin_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2008-Aug-27 03:43:52 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 03:43:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 03:43:52 LOG5 end_task: Level: (3) ID = <10293> Status = 0 0 0 0 ok 2008-Aug-27 03:43:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 03:43:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 03:43:52 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2008-Aug-27 03:43:52 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2008-Aug-27 03:43:52 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2008-Aug-27 03:43:52 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2008-Aug-27 03:43:52 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2008-Aug-27 03:43:52 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2008-Aug-27 03:43:52 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2008-Aug-27 03:43:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-27 03:43:52 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2008-Aug-27 03:43:52 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2008-Aug-27 03:43:52 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2008-Aug-27 03:43:52 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2008-Aug-27 03:43:52 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2008-Aug-27 03:43:52 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2008-Aug-27 03:43:52 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2008-Aug-27 03:43:52 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2008-Aug-27 03:43:52 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2008-Aug-27 03:43:52 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2008-Aug-27 03:43:52 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2008-Aug-27 03:43:52 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2008-Aug-27 03:43:52 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2008-Aug-27 03:43:52 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2008-Aug-27 03:43:52 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2008-Aug-27 03:43:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:43:52 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2008-Aug-27 03:43:52 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2008-Aug-27 03:43:52 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2008-Aug-27 03:43:52 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2008-Aug-27 03:43:52 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2008-Aug-27 03:43:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2008-Aug-27 03:43:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:43:52 START begin_task: Starting task 'waiting on configuring IF/LO path' 2008-Aug-27 03:43:52 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2008-Aug-27 03:43:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-27 03:43:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2008-Aug-27 03:43:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:43:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:43:52 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:43:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:43:53 LOG4 got_cormsg: From DATATAKING: vw% DONE 2008-Aug-27 03:43:53 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2008-Aug-27 03:43:53 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2008-Aug-27 03:43:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2008-Aug-27 03:43:53 STOP finish_task: Finishing task 'configuring IF/LO path' 2008-Aug-27 03:43:53 LOG5 finish_task: Level: (2) ID = <10292> Status = 0 0 0 0 ok 2008-Aug-27 03:43:53 DONE finish_task: DONE finished configuration: IF/LO path 2008-Aug-27 03:43:53 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-27 03:43:53 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2008-Aug-27 03:43:53 LOG5 end_task: Level: (2) ID = <10292> Status = 0 0 0 0 ok 2008-Aug-27 03:43:53 BEGIN begin_task: Starting task 'configuring WAPPs' 2008-Aug-27 03:43:53 LOG5 begin_task: Level: (2) ID = <10295> Status = 0 0 0 0 ok 2008-Aug-27 03:43:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2008-Aug-27 03:43:53 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2008-Aug-27 03:43:53 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2008-Aug-27 03:43:53 START begin_task: Starting task 'selecting calibration port' 2008-Aug-27 03:43:53 LOG5 begin_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2008-Aug-27 03:43:53 LOG3 vw_send: To DATATAKING: calport 3 2008-Aug-27 03:43:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2008-Aug-27 03:43:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:43:53 START begin_task: Starting task 'waiting on calport' 2008-Aug-27 03:43:53 LOG5 begin_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Aug-27 03:43:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:43:53 LOG4 got_cormsg: From DATATAKING: calport 3 2008-Aug-27 03:43:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:43:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:43:53 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 03:43:53 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2008-Aug-27 03:43:53 LOG5 end_task: Level: (4) ID = <10297> Status = 0 0 0 0 ok 2008-Aug-27 03:43:53 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2008-Aug-27 03:43:53 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2008-Aug-27 03:43:53 LOG5 end_task: Level: (3) ID = <10296> Status = 0 0 0 0 ok 2008-Aug-27 03:43:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 03:43:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 03:43:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 03:43:53 LOG5 begin_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2008-Aug-27 03:43:53 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 03:43:53 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:43:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 03:43:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 03:43:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 03:43:53 LOG5 end_task: Level: (3) ID = <10298> Status = 0 0 0 0 ok 2008-Aug-27 03:43:53 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2008-Aug-27 03:43:53 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2008-Aug-27 03:43:53 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2008-Aug-27 03:43:53 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2008-Aug-27 03:43:53 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2008-Aug-27 03:43:53 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2008-Aug-27 03:43:53 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2008-Aug-27 03:43:53 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2008-Aug-27 03:43:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:43:54 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:43:54 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:43:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:43:54 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2008-Aug-27 03:43:54 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2008-Aug-27 03:43:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 03:43:54 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Aug-27 03:43:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2008-Aug-27 03:43:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2008-Aug-27 03:43:54 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 03:43:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 03:43:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 03:43:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 03:43:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 03:43:54 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2008-Aug-27 03:43:54 LOG3 sock_errsend: To WAPPDATA: FLUSH 2008-Aug-27 03:43:54 STOP finish_task: Finishing task 'configuring WAPPs' 2008-Aug-27 03:43:54 LOG5 finish_task: Level: (2) ID = <10295> Status = 0 0 0 0 ok 2008-Aug-27 03:43:54 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2008-Aug-27 03:43:54 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-27 03:43:54 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2008-Aug-27 03:43:54 LOG5 end_task: Level: (2) ID = <10295> Status = 0 0 0 0 ok 2008-Aug-27 03:43:54 COMMAND run_command_line: EXECUTING command 7: 'TRACKCURPOS' 2008-Aug-27 03:43:54 BEGIN begin_task: Starting task 'tracking current position' 2008-Aug-27 03:43:54 LOG5 begin_task: Level: (2) ID = <10300> Status = 0 0 0 0 ok 2008-Aug-27 03:43:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2008-Aug-27 03:43:54 INFO1 track_current_pos: Starting to track the current commanded position RA = 01:40:04.1 and Dec = +04:15:31.2 2008-Aug-27 03:43:54 LOG3 track_source: Calling 'track_source Cur-pos 014004.1 041531.2 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2008-Aug-27 03:43:54 START begin_task: Starting task 'sending tracking commands' 2008-Aug-27 03:43:54 LOG5 begin_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2008-Aug-27 03:43:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2008-Aug-27 03:43:54 INFO1 track_source: Starting to track Cur-pos 2008-Aug-27 03:43:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2008-Aug-27 03:43:54 LOG3 vw_send: To DATATAKING: set ra 014004.1 2008-Aug-27 03:43:54 LOG3 vw_send: To DATATAKING: set dec 041531.2 2008-Aug-27 03:43:54 LOG3 vw_send: To DATATAKING: pnt tr send 2008-Aug-27 03:43:54 LOG3 vw_send: To DATATAKING: pnt tr 014004.1 041531.2 -CJ 2008-Aug-27 03:43:54 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2008-Aug-27 03:43:54 STOP finish_task: Finishing task 'sending tracking commands' 2008-Aug-27 03:43:54 LOG5 finish_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2008-Aug-27 03:43:54 INFO2 finish_task: DONE finished sending: tracking commands 2008-Aug-27 03:43:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 03:43:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2008-Aug-27 03:43:54 LOG5 end_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2008-Aug-27 03:43:54 START begin_task: Starting task 'waiting on telescope' 2008-Aug-27 03:43:54 LOG5 begin_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Aug-27 03:43:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2008-Aug-27 03:43:54 LOG3 waittrk: Start waittrk 5 2008-Aug-27 03:43:54 START begin_task: Starting task 'waiting on telescope movement' 2008-Aug-27 03:43:54 LOG5 begin_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2008-Aug-27 03:43:54 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2008-Aug-27 03:43:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2008-Aug-27 03:43:54 LOG4 got_cormsg: From DATATAKING: set ra 014004.1 2008-Aug-27 03:43:54 LOG4 got_cormsg: From DATATAKING: set dec 041531.2 2008-Aug-27 03:43:54 LOG4 got_cormsg: From DATATAKING: vw% 014004.1 2008-Aug-27 03:43:54 LOG4 got_cormsg: From DATATAKING: vw% 041531.2 2008-Aug-27 03:43:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:43:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2008-Aug-27 03:43:54 LOG4 got_cormsg: From DATATAKING: pnt tr 014004.1 041531.2 -CJ 2008-Aug-27 03:43:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2008-Aug-27 03:43:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2008-Aug-27 03:43:54 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:43:59 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2008-Aug-27 03:43:59 LOG5 end_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2008-Aug-27 03:43:59 START begin_task: Starting task 'waiting on telescope on source' 2008-Aug-27 03:43:59 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-Aug-27 03:44:05 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2008-Aug-27 03:44:05 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2008-Aug-27 03:44:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2008-Aug-27 03:44:05 INFO2 waittrk: Now tracking Cur-pos 2008-Aug-27 03:44:06 LOG4 waittrk: Current telescope position: Az = 359.84 ZA = 14.02 2008-Aug-27 03:44:06 STOP finish_task: Finishing task 'waiting on telescope' 2008-Aug-27 03:44:06 LOG5 finish_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Aug-27 03:44:06 INFO2 finish_task: DONE finished waiting: telescope on source 2008-Aug-27 03:44:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 03:44:06 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2008-Aug-27 03:44:06 LOG5 end_task: Level: (3) ID = <10302> Status = 0 0 0 0 ok 2008-Aug-27 03:44:06 STOP finish_task: Finishing task 'tracking current position' 2008-Aug-27 03:44:06 LOG5 finish_task: Level: (2) ID = <10300> Status = 0 0 0 0 ok 2008-Aug-27 03:44:06 DONE finish_task: DONE finished tracking: current position 2008-Aug-27 03:44:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-27 03:44:06 END end_task: Finishing task 'tracking current position' with status 'OK' 2008-Aug-27 03:44:06 LOG5 end_task: Level: (2) ID = <10300> Status = 0 0 0 0 ok 2008-Aug-27 03:44:06 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2008-Aug-27 03:44:06 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2008-Aug-27 03:44:06 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2008-Aug-27 03:44:06 LOG5 begin_task: Level: (2) ID = <10305> Status = 0 0 0 0 ok 2008-Aug-27 03:44:06 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2008-Aug-27 03:44:06 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2008-Aug-27 03:44:06 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2008-Aug-27 03:44:06 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2008-Aug-27 03:44:06 START begin_task: Starting task 'waiting on ALFA rotation' 2008-Aug-27 03:44:06 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2008-Aug-27 03:44:07 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2008-Aug-27 03:44:07 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2008-Aug-27 03:44:07 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2008-Aug-27 03:44:07 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2008-Aug-27 03:44:07 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2008-Aug-27 03:44:07 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2008-Aug-27 03:44:07 LOG5 finish_task: Level: (2) ID = <10305> Status = 0 0 0 0 ok 2008-Aug-27 03:44:07 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2008-Aug-27 03:44:07 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-27 03:44:07 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2008-Aug-27 03:44:07 LOG5 end_task: Level: (2) ID = <10305> Status = 0 0 0 0 ok 2008-Aug-27 03:44:07 COMMAND run_command_line: EXECUTING command 12: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=0 freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Aug-27 03:44:07 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2008-Aug-27 03:44:07 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2008-Aug-27 03:44:07 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first 0 {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2008-Aug-27 03:44:07 BEGIN begin_task: Starting task 'smart frequency switching' 2008-Aug-27 03:44:07 LOG5 begin_task: Level: (2) ID = <10307> Status = 0 0 0 0 ok 2008-Aug-27 03:44:07 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2008-Aug-27 03:44:07 INFO1 smartfreq: Starting pattern: Smart frequency switching 2008-Aug-27 03:44:07 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2008-Aug-27 03:44:07 START begin_task: Starting task 'selecting calibration type' 2008-Aug-27 03:44:07 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Aug-27 03:44:07 LOG3 vw_send: To DATATAKING: setcal hcorcal 2008-Aug-27 03:44:07 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2008-Aug-27 03:44:07 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:44:07 START begin_task: Starting task 'waiting on setcal' 2008-Aug-27 03:44:07 LOG5 begin_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Aug-27 03:44:07 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2008-Aug-27 03:44:07 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:44:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:44:08 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 03:44:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2008-Aug-27 03:44:08 LOG5 end_task: Level: (4) ID = <10309> Status = 0 0 0 0 ok 2008-Aug-27 03:44:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2008-Aug-27 03:44:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 03:44:08 LOG3 socket_wait: To ALFAMON: CAL HI 2008-Aug-27 03:44:08 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 03:44:08 LOG5 begin_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2008-Aug-27 03:44:08 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:44:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 03:44:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 03:44:09 LOG5 end_task: Level: (4) ID = <10310> Status = 0 0 0 0 ok 2008-Aug-27 03:44:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 03:44:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2008-Aug-27 03:44:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2008-Aug-27 03:44:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2008-Aug-27 03:44:09 START begin_task: Starting task 'waiting on command to ALFA' 2008-Aug-27 03:44:09 LOG5 begin_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Aug-27 03:44:09 LOG4 got_alfamon: From ALFAMON: ACK 2008-Aug-27 03:44:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2008-Aug-27 03:44:09 LOG5 end_task: Level: (4) ID = <10311> Status = 0 0 0 0 ok 2008-Aug-27 03:44:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2008-Aug-27 03:44:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2008-Aug-27 03:44:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2008-Aug-27 03:44:09 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2008-Aug-27 03:44:09 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:44:09 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:44:09 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:44:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Kristine Spekkens 2008-Aug-27 03:44:09 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2008-Aug-27 03:44:09 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2008-Aug-27 03:44:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 03:44:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 03:44:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 03:44:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 03:44:09 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2008-Aug-27 03:44:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Kristine Spekkens' 2008-Aug-27 03:44:09 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 03:44:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 03:44:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 03:44:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 03:44:09 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2008-Aug-27 03:44:09 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Aug-27 03:44:09 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-27 03:44:09 LOG5 begin_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Aug-27 03:44:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2008-Aug-27 03:44:09 INFO2 adjust_power: Starting to adjust WAPP power 2008-Aug-27 03:44:09 LOG3 vw_send: To DATATAKING: adjpwrif2 2008-Aug-27 03:44:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2008-Aug-27 03:44:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:44:09 START begin_task: Starting task 'waiting on adjpwrif2' 2008-Aug-27 03:44:09 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Aug-27 03:44:09 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2008-Aug-27 03:44:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2008-Aug-27 03:44:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20080827.a2010.0022.fits 2008-Aug-27 03:44:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20080827.a2010.0022.fits} 2008-Aug-27 03:44:12 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:44:12 LOG4 got_cormsg: From DATATAKING: DONE 2008-Aug-27 03:44:12 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2008-Aug-27 03:44:12 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2008-Aug-27 03:44:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2008-Aug-27 03:44:12 START begin_task: Starting task 'adjusting WAPP power' 2008-Aug-27 03:44:12 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Aug-27 03:44:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2008-Aug-27 03:44:12 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-27 03:44:12 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-27 03:44:12 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-27 03:44:12 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2008-Aug-27 03:44:12 START begin_task: Starting task 'waiting on adjust WAPP power' 2008-Aug-27 03:44:12 LOG5 begin_task: Level: (5) ID = <10316> Status = 0 0 0 0 ok 2008-Aug-27 03:44:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2008-Aug-27 03:44:13 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:44:13 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2008-Aug-27 03:44:13 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2008-Aug-27 03:44:13 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 3 dB --- beam 5: 5 5 dB 2008-Aug-27 03:44:13 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 2 0 dB 2008-Aug-27 03:44:13 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2008-Aug-27 03:44:13 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2008-Aug-27 03:44:13 LOG5 end_task: Level: (5) ID = <10316> Status = 0 0 0 0 ok 2008-Aug-27 03:44:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.082 0.889 ALFA beam 1: 1.075 1.061 2008-Aug-27 03:44:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.935 0.953 ALFA beam 3: 1.028 0.919 2008-Aug-27 03:44:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.062 0.891 ALFA beam 5: 1.048 0.955 2008-Aug-27 03:44:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.924 0.096 ALFA beam 7: 1.016 0.107 2008-Aug-27 03:44:13 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-27 03:44:13 LOG5 finish_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Aug-27 03:44:13 INFO3 finish_task: DONE finished adjusting: WAPP power 2008-Aug-27 03:44:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 03:44:13 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-27 03:44:13 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2008-Aug-27 03:44:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2008-Aug-27 03:44:13 STOP finish_task: Finishing task 'adjusting WAPP power' 2008-Aug-27 03:44:13 LOG5 finish_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Aug-27 03:44:13 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2008-Aug-27 03:44:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2008-Aug-27 03:44:13 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2008-Aug-27 03:44:13 LOG5 end_task: Level: (3) ID = <10313> Status = 0 0 0 0 ok 2008-Aug-27 03:44:13 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Aug-27 03:44:13 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Aug-27 03:44:13 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Aug-27 03:44:13 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:44:13 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65751 J 2008-Aug-27 03:44:13 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:44:13 LOG2 antvel: Parameters to Doppler: Topocentric 27853 2008 240 0.0 2008-Aug-27 03:44:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:44:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Aug-27 03:44:13 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Aug-27 03:44:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:44:13 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:44:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Aug-27 03:44:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:44:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-27 03:44:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:44:13 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Aug-27 03:44:13 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.681076 2008.6575104887572 18.999933 2008-Aug-27 03:44:13 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555820 4.258666666666668 2008-Aug-27 03:44:13 LOG4 log_alfabeam: ALFABEAM 1 1.666686836120635 4.363479749945549 2008-Aug-27 03:44:13 LOG4 log_alfabeam: ALFABEAM 2 1.662054724845296 4.294127318660473 2008-Aug-27 03:44:13 LOG4 log_alfabeam: ALFABEAM 3 1.663145947445745 4.189235494045408 2008-Aug-27 03:44:13 LOG4 log_alfabeam: ALFABEAM 4 1.668941002373162 4.153873012003893 2008-Aug-27 03:44:13 LOG4 log_alfabeam: ALFABEAM 5 1.673584034115555 4.223714881109258 2008-Aug-27 03:44:13 LOG4 log_alfabeam: ALFABEAM 6 1.672421116722554 4.328427166852923 2008-Aug-27 03:44:13 INFO2 take_data: Starting WAPP+GALFA scan: 824000046 2008-Aug-27 03:44:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:44:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:44:14 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2008-Aug-27 03:44:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:44:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Aug-27 03:44:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:44:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:44:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:44:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27855.00 2008-Aug-27 03:44:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:44:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:44:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:44:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:44:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:44:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:44:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:44:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:44:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:44:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.096 < 0.75)! 2008-Aug-27 03:44:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.082 0.889 1.075 1.061 2008-Aug-27 03:44:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.953 1.028 0.919 2008-Aug-27 03:44:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.062 0.891 1.048 0.955 2008-Aug-27 03:44:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.096 1.016 0.107 2008-Aug-27 03:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.119 (still bad) 2008-Aug-27 03:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:44:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:44:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:44:25 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2008-Aug-27 03:44:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:44:25 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2008-Aug-27 03:44:25 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Aug-27 03:44:25 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Aug-27 03:44:25 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Aug-27 03:44:25 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:44:25 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65751 J 2008-Aug-27 03:44:25 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:44:25 LOG2 antvel: Parameters to Doppler: Topocentric 27865 2008 240 0.0 2008-Aug-27 03:44:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:44:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Aug-27 03:44:25 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Aug-27 03:44:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:44:25 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:44:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Aug-27 03:44:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:44:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-27 03:44:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:44:25 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Aug-27 03:44:25 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.684418 2008.6575108690142 18.999933 2008-Aug-27 03:44:25 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555816 4.258666666666671 2008-Aug-27 03:44:25 LOG4 log_alfabeam: ALFABEAM 1 1.666710809739308 4.363536369688047 2008-Aug-27 03:44:25 LOG4 log_alfabeam: ALFABEAM 2 1.662062864936997 4.294421313326619 2008-Aug-27 03:44:25 LOG4 log_alfabeam: ALFABEAM 3 1.663130101557185 4.189474278269527 2008-Aug-27 03:44:25 LOG4 log_alfabeam: ALFABEAM 4 1.668917039067064 4.153815535684882 2008-Aug-27 03:44:25 LOG4 log_alfabeam: ALFABEAM 5 1.673576008344452 4.223419454446575 2008-Aug-27 03:44:25 LOG4 log_alfabeam: ALFABEAM 6 1.672437040864272 4.328190624547239 2008-Aug-27 03:44:25 INFO2 take_data: Starting WAPP+GALFA scan: 824000047 2008-Aug-27 03:44:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:44:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:44:26 LOG5 begin_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Aug-27 03:44:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:44:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Aug-27 03:44:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:44:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:44:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:44:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27867.00 2008-Aug-27 03:44:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:44:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:44:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:44:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:44:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:44:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:44:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:44:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:44:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-27 03:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2008-Aug-27 03:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-27 03:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-27 03:44:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:44:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:44:37 LOG5 end_task: Level: (4) ID = <10320> Status = 0 0 0 0 ok 2008-Aug-27 03:44:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:44:37 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2008-Aug-27 03:44:37 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Aug-27 03:44:37 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Aug-27 03:44:37 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Aug-27 03:44:37 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:44:37 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65751 J 2008-Aug-27 03:44:37 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:44:37 LOG2 antvel: Parameters to Doppler: Topocentric 27877 2008 240 0.0 2008-Aug-27 03:44:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:44:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Aug-27 03:44:37 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Aug-27 03:44:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:44:37 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:44:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Aug-27 03:44:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:44:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-27 03:44:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:44:37 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Aug-27 03:44:37 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.687761 2008.6575112492712 18.999933 2008-Aug-27 03:44:37 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555669 4.258666666666666 2008-Aug-27 03:44:37 LOG4 log_alfabeam: ALFABEAM 1 1.666734801613002 4.363591775200752 2008-Aug-27 03:44:37 LOG4 log_alfabeam: ALFABEAM 2 1.662071073932786 4.294714954501887 2008-Aug-27 03:44:37 LOG4 log_alfabeam: ALFABEAM 3 1.663114306973954 4.189713925105513 2008-Aug-27 03:44:37 LOG4 log_alfabeam: ALFABEAM 4 1.668893057105778 4.153759272670177 2008-Aug-27 03:44:37 LOG4 log_alfabeam: ALFABEAM 5 1.673567912622528 4.223124368625481 2008-Aug-27 03:44:37 LOG4 log_alfabeam: ALFABEAM 6 1.672452914765170 4.327953211756077 2008-Aug-27 03:44:37 INFO2 take_data: Starting WAPP+GALFA scan: 824000048 2008-Aug-27 03:44:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:44:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:44:38 LOG5 begin_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-Aug-27 03:44:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:44:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Aug-27 03:44:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:44:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:44:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:44:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27879.00 2008-Aug-27 03:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-27 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:44:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-27 03:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2008-Aug-27 03:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-27 03:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-27 03:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-27 03:44:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:44:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:44:49 LOG5 end_task: Level: (4) ID = <10322> Status = 0 0 0 0 ok 2008-Aug-27 03:44:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:44:49 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2008-Aug-27 03:44:49 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Aug-27 03:44:49 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Aug-27 03:44:49 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Aug-27 03:44:49 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:44:49 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65751 J 2008-Aug-27 03:44:49 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:44:49 LOG2 antvel: Parameters to Doppler: Topocentric 27889 2008 240 0.0 2008-Aug-27 03:44:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:44:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Aug-27 03:44:49 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Aug-27 03:44:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:44:49 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:44:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Aug-27 03:44:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:44:49 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-27 03:44:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:44:49 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2008-Aug-27 03:44:49 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.691103 2008.6575116295282 18.999933 2008-Aug-27 03:44:49 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555614 4.258666666666661 2008-Aug-27 03:44:49 LOG4 log_alfabeam: ALFABEAM 1 1.666758796509804 4.363645931624923 2008-Aug-27 03:44:49 LOG4 log_alfabeam: ALFABEAM 2 1.662079346603839 4.295008055918640 2008-Aug-27 03:44:49 LOG4 log_alfabeam: ALFABEAM 3 1.663098573708011 4.189954282194605 2008-Aug-27 03:44:49 LOG4 log_alfabeam: ALFABEAM 4 1.668869071715811 4.153704258395750 2008-Aug-27 03:44:49 LOG4 log_alfabeam: ALFABEAM 5 1.673559752503688 4.222829810890708 2008-Aug-27 03:44:49 LOG4 log_alfabeam: ALFABEAM 6 1.672468728361136 4.327715079337084 2008-Aug-27 03:44:49 INFO2 take_data: Starting WAPP+GALFA scan: 824000049 2008-Aug-27 03:44:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:44:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:44:50 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Aug-27 03:44:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:44:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Aug-27 03:44:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:44:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:44:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:44:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27891.00 2008-Aug-27 03:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-27 03:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:44:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2008-Aug-27 03:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2008-Aug-27 03:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2008-Aug-27 03:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2008-Aug-27 03:45:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:45:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:45:01 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2008-Aug-27 03:45:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:45:01 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2008-Aug-27 03:45:01 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Aug-27 03:45:01 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Aug-27 03:45:01 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Aug-27 03:45:01 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:45:01 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65751 J 2008-Aug-27 03:45:01 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:45:01 LOG2 antvel: Parameters to Doppler: Topocentric 27901 2008 240 0.0 2008-Aug-27 03:45:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:45:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Aug-27 03:45:01 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Aug-27 03:45:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:45:01 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:45:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Aug-27 03:45:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:45:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-27 03:45:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:45:01 LOG5 begin_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2008-Aug-27 03:45:01 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.694446 2008.6575120097853 18.999933 2008-Aug-27 03:45:01 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555666 4.258666666666672 2008-Aug-27 03:45:01 LOG4 log_alfabeam: ALFABEAM 1 1.666782807908950 4.363698869795190 2008-Aug-27 03:45:01 LOG4 log_alfabeam: ALFABEAM 2 1.662087687576036 4.295300782438209 2008-Aug-27 03:45:01 LOG4 log_alfabeam: ALFABEAM 3 1.663082892899828 4.190195484302759 2008-Aug-27 03:45:01 LOG4 log_alfabeam: ALFABEAM 4 1.668845069423489 4.153650461577707 2008-Aug-27 03:45:01 LOG4 log_alfabeam: ALFABEAM 5 1.673551523420654 4.222535615621639 2008-Aug-27 03:45:01 LOG4 log_alfabeam: ALFABEAM 6 1.672484490553274 4.327476093692220 2008-Aug-27 03:45:01 INFO2 take_data: Starting WAPP+GALFA scan: 824000050 2008-Aug-27 03:45:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:45:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:45:02 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2008-Aug-27 03:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2008-Aug-27 03:45:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:45:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Aug-27 03:45:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:45:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:45:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:45:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27903.00 2008-Aug-27 03:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.081 (still bad) 2008-Aug-27 03:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.083 (still bad) 2008-Aug-27 03:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.082 (still bad) 2008-Aug-27 03:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.082 (still bad) 2008-Aug-27 03:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.082 (still bad) 2008-Aug-27 03:45:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:45:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:45:13 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2008-Aug-27 03:45:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:45:13 LOG5 end_task: Level: (3) ID = <10325> Status = 0 0 0 0 ok 2008-Aug-27 03:45:13 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Aug-27 03:45:13 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Aug-27 03:45:13 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Aug-27 03:45:13 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:45:13 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65751 J 2008-Aug-27 03:45:13 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:45:13 LOG2 antvel: Parameters to Doppler: Topocentric 27913 2008 240 0.0 2008-Aug-27 03:45:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:45:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Aug-27 03:45:13 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Aug-27 03:45:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:45:13 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:45:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Aug-27 03:45:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:45:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-27 03:45:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:45:13 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2008-Aug-27 03:45:13 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.697788 2008.6575123900425 18.999933 2008-Aug-27 03:45:13 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555566 4.258666666666667 2008-Aug-27 03:45:13 LOG4 log_alfabeam: ALFABEAM 1 1.666806820564097 4.363750556603691 2008-Aug-27 03:45:13 LOG4 log_alfabeam: ALFABEAM 2 1.662096091525978 4.295592948448438 2008-Aug-27 03:45:13 LOG4 log_alfabeam: ALFABEAM 3 1.663067274479360 4.190437377973979 2008-Aug-27 03:45:13 LOG4 log_alfabeam: ALFABEAM 4 1.668821065468583 4.153597915901825 2008-Aug-27 03:45:13 LOG4 log_alfabeam: ALFABEAM 5 1.673543230621119 4.222241969423123 2008-Aug-27 03:45:13 LOG4 log_alfabeam: ALFABEAM 6 1.672500191356171 4.327236406789515 2008-Aug-27 03:45:13 INFO2 take_data: Starting WAPP+GALFA scan: 824000051 2008-Aug-27 03:45:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:45:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:45:14 LOG5 begin_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2008-Aug-27 03:45:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:45:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Aug-27 03:45:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:45:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:45:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.082 (still bad) 2008-Aug-27 03:45:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27915.00 2008-Aug-27 03:45:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:45:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:45:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:45:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:45:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:45:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.079 (still bad) 2008-Aug-27 03:45:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:45:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.073 0.884 1.070 1.055 2008-Aug-27 03:45:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.949 1.036 0.935 2008-Aug-27 03:45:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.912 1.040 0.949 2008-Aug-27 03:45:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.098 1.029 0.109 2008-Aug-27 03:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.077 (still bad) 2008-Aug-27 03:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.078 (still bad) 2008-Aug-27 03:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.079 (still bad) 2008-Aug-27 03:45:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:45:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:45:25 LOG5 end_task: Level: (4) ID = <10328> Status = 0 0 0 0 ok 2008-Aug-27 03:45:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:45:25 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2008-Aug-27 03:45:25 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Aug-27 03:45:25 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Aug-27 03:45:25 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Aug-27 03:45:25 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:45:25 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65751 J 2008-Aug-27 03:45:25 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:45:25 LOG2 antvel: Parameters to Doppler: Topocentric 27925 2008 240 0.0 2008-Aug-27 03:45:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:45:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Aug-27 03:45:25 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Aug-27 03:45:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:45:25 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:45:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Aug-27 03:45:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:45:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-27 03:45:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:45:25 LOG5 begin_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2008-Aug-27 03:45:25 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.701131 2008.6575127702995 18.999933 2008-Aug-27 03:45:25 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555670 4.258666666666668 2008-Aug-27 03:45:25 LOG4 log_alfabeam: ALFABEAM 1 1.666830847963658 4.363801021682427 2008-Aug-27 03:45:25 LOG4 log_alfabeam: ALFABEAM 2 1.662104563143767 4.295884718363029 2008-Aug-27 03:45:25 LOG4 log_alfabeam: ALFABEAM 3 1.663051709642310 4.190680098730375 2008-Aug-27 03:45:25 LOG4 log_alfabeam: ALFABEAM 4 1.668797046367099 4.153546591286378 2008-Aug-27 03:45:25 LOG4 log_alfabeam: ALFABEAM 5 1.673534869473605 4.221948707111333 2008-Aug-27 03:45:25 LOG4 log_alfabeam: ALFABEAM 6 1.672515839617080 4.326995884266880 2008-Aug-27 03:45:25 INFO2 take_data: Starting WAPP+GALFA scan: 824000052 2008-Aug-27 03:45:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:45:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:45:26 LOG5 begin_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2008-Aug-27 03:45:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:45:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Aug-27 03:45:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:45:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:45:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:45:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27927.00 2008-Aug-27 03:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.079 (still bad) 2008-Aug-27 03:45:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:45:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:45:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:45:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:45:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:45:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.077 (still bad) 2008-Aug-27 03:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.075 (still bad) 2008-Aug-27 03:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.076 (still bad) 2008-Aug-27 03:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.076 (still bad) 2008-Aug-27 03:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.075 (still bad) 2008-Aug-27 03:45:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:45:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:45:37 LOG5 end_task: Level: (4) ID = <10330> Status = 0 0 0 0 ok 2008-Aug-27 03:45:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:45:37 LOG5 end_task: Level: (3) ID = <10329> Status = 0 0 0 0 ok 2008-Aug-27 03:45:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Aug-27 03:45:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 03:45:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 03:45:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 03:45:37 LOG5 begin_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2008-Aug-27 03:45:37 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 03:45:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 03:45:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 03:45:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 03:45:37 LOG5 end_task: Level: (3) ID = <10331> Status = 0 0 0 0 ok 2008-Aug-27 03:45:37 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Aug-27 03:45:37 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Aug-27 03:45:37 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Aug-27 03:45:37 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:45:37 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65751 J 2008-Aug-27 03:45:37 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:45:37 LOG2 antvel: Parameters to Doppler: Topocentric 27937 2008 240 0.0 2008-Aug-27 03:45:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:45:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Aug-27 03:45:37 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Aug-27 03:45:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:45:37 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:45:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Aug-27 03:45:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:45:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-27 03:45:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:45:37 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2008-Aug-27 03:45:37 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.704473 2008.6575131505565 18.999933 2008-Aug-27 03:45:37 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555570 4.258666666666666 2008-Aug-27 03:45:37 LOG4 log_alfabeam: ALFABEAM 1 1.666854874851174 4.363850233678592 2008-Aug-27 03:45:37 LOG4 log_alfabeam: ALFABEAM 2 1.662113097014398 4.296175907257893 2008-Aug-27 03:45:37 LOG4 log_alfabeam: ALFABEAM 3 1.663036208236232 4.190923492047538 2008-Aug-27 03:45:37 LOG4 log_alfabeam: ALFABEAM 4 1.668773027370683 4.153496519662723 2008-Aug-27 03:45:37 LOG4 log_alfabeam: ALFABEAM 5 1.673526445319401 4.221656014620519 2008-Aug-27 03:45:37 LOG4 log_alfabeam: ALFABEAM 6 1.672531425431650 4.326754679174584 2008-Aug-27 03:45:37 INFO2 take_data: Starting WAPP+GALFA scan: 824000053 2008-Aug-27 03:45:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:45:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:45:38 LOG5 begin_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2008-Aug-27 03:45:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:45:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Aug-27 03:45:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:45:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:45:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:45:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27939.00 2008-Aug-27 03:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.075 (still bad) 2008-Aug-27 03:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.549 (still bad) 2008-Aug-27 03:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.547 (still bad) 2008-Aug-27 03:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.547 (still bad) 2008-Aug-27 03:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.547 (still bad) 2008-Aug-27 03:45:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:45:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:45:49 LOG5 end_task: Level: (4) ID = <10333> Status = 0 0 0 0 ok 2008-Aug-27 03:45:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:45:49 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2008-Aug-27 03:45:49 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Aug-27 03:45:49 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Aug-27 03:45:49 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Aug-27 03:45:49 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:45:49 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65751 J 2008-Aug-27 03:45:49 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:45:49 LOG2 antvel: Parameters to Doppler: Topocentric 27949 2008 240 0.0 2008-Aug-27 03:45:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:45:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Aug-27 03:45:49 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Aug-27 03:45:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:45:49 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:45:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Aug-27 03:45:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:45:49 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-27 03:45:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:45:49 LOG5 begin_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2008-Aug-27 03:45:49 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.707816 2008.6575135308135 18.999933 2008-Aug-27 03:45:49 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555535 4.258666666666666 2008-Aug-27 03:45:49 LOG4 log_alfabeam: ALFABEAM 1 1.666878914723116 4.363898221018976 2008-Aug-27 03:45:49 LOG4 log_alfabeam: ALFABEAM 2 1.662121697891416 4.296466679081464 2008-Aug-27 03:45:49 LOG4 log_alfabeam: ALFABEAM 3 1.663020761513364 4.191167694188592 2008-Aug-27 03:45:49 LOG4 log_alfabeam: ALFABEAM 4 1.668748994987119 4.153447672153936 2008-Aug-27 03:45:49 LOG4 log_alfabeam: ALFABEAM 5 1.673517953462924 4.221363727221322 2008-Aug-27 03:45:49 LOG4 log_alfabeam: ALFABEAM 6 1.672546957591355 4.326512656401330 2008-Aug-27 03:45:49 INFO2 take_data: Starting WAPP+GALFA scan: 824000054 2008-Aug-27 03:45:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:45:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:45:50 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Aug-27 03:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.547 (still bad) 2008-Aug-27 03:45:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:45:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Aug-27 03:45:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:45:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:45:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:45:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27951.00 2008-Aug-27 03:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.545 (still bad) 2008-Aug-27 03:45:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.545 (still bad) 2008-Aug-27 03:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.542 (still bad) 2008-Aug-27 03:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.543 (still bad) 2008-Aug-27 03:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.542 (still bad) 2008-Aug-27 03:46:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:46:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:46:01 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2008-Aug-27 03:46:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:46:01 LOG5 end_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2008-Aug-27 03:46:01 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Aug-27 03:46:01 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Aug-27 03:46:01 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Aug-27 03:46:01 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:46:01 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65751 J 2008-Aug-27 03:46:01 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:46:01 LOG2 antvel: Parameters to Doppler: Topocentric 27961 2008 240 0.0 2008-Aug-27 03:46:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:46:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Aug-27 03:46:01 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Aug-27 03:46:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:46:01 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:46:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Aug-27 03:46:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:46:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-27 03:46:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:46:01 LOG5 begin_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2008-Aug-27 03:46:01 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.711158 2008.6575139110705 18.999933 2008-Aug-27 03:46:01 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555554 4.258666666666666 2008-Aug-27 03:46:01 LOG4 log_alfabeam: ALFABEAM 1 1.666902952315059 4.363944954108882 2008-Aug-27 03:46:01 LOG4 log_alfabeam: ALFABEAM 2 1.662130360268695 4.296756849629892 2008-Aug-27 03:46:01 LOG4 log_alfabeam: ALFABEAM 3 1.663005379236936 4.191412549590063 2008-Aug-27 03:46:01 LOG4 log_alfabeam: ALFABEAM 4 1.668724964476216 4.153400078933502 2008-Aug-27 03:46:01 LOG4 log_alfabeam: ALFABEAM 5 1.673509399337562 4.221072030144793 2008-Aug-27 03:46:01 LOG4 log_alfabeam: ALFABEAM 6 1.672562426275136 4.326269970050667 2008-Aug-27 03:46:01 INFO2 take_data: Starting WAPP+GALFA scan: 824000055 2008-Aug-27 03:46:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:46:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:46:02 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2008-Aug-27 03:46:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:46:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Aug-27 03:46:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:46:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:46:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.541 (still bad) 2008-Aug-27 03:46:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27963.00 2008-Aug-27 03:46:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:46:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:46:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:46:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:46:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:46:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.541 (still bad) 2008-Aug-27 03:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.542 (still bad) 2008-Aug-27 03:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.538 (still bad) 2008-Aug-27 03:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.539 (still bad) 2008-Aug-27 03:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.539 (still bad) 2008-Aug-27 03:46:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:46:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:46:13 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2008-Aug-27 03:46:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:46:13 LOG5 end_task: Level: (3) ID = <10336> Status = 0 0 0 0 ok 2008-Aug-27 03:46:13 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Aug-27 03:46:13 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Aug-27 03:46:13 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Aug-27 03:46:13 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:46:13 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65751 J 2008-Aug-27 03:46:13 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:46:13 LOG2 antvel: Parameters to Doppler: Topocentric 27973 2008 240 0.0 2008-Aug-27 03:46:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:46:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Aug-27 03:46:13 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Aug-27 03:46:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:46:13 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:46:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Aug-27 03:46:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:46:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-27 03:46:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:46:13 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Aug-27 03:46:13 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.714501 2008.6575142913277 18.999933 2008-Aug-27 03:46:13 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555603 4.258666666666668 2008-Aug-27 03:46:13 LOG4 log_alfabeam: ALFABEAM 1 1.666927001129627 4.363990460167625 2008-Aug-27 03:46:13 LOG4 log_alfabeam: ALFABEAM 2 1.662139088962582 4.297046582369045 2008-Aug-27 03:46:13 LOG4 log_alfabeam: ALFABEAM 3 1.662990052716278 4.191658195240855 2008-Aug-27 03:46:13 LOG4 log_alfabeam: ALFABEAM 4 1.668700922339186 4.153353712331710 2008-Aug-27 03:46:13 LOG4 log_alfabeam: ALFABEAM 5 1.673500778183611 4.220780759133617 2008-Aug-27 03:46:13 LOG4 log_alfabeam: ALFABEAM 6 1.672577840217621 4.326026484277183 2008-Aug-27 03:46:13 INFO2 take_data: Starting WAPP+GALFA scan: 824000056 2008-Aug-27 03:46:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:46:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:46:14 LOG5 begin_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2008-Aug-27 03:46:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:46:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Aug-27 03:46:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:46:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:46:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.535 (still bad) 2008-Aug-27 03:46:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27975.00 2008-Aug-27 03:46:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:46:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:46:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:46:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:46:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:46:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.535 (still bad) 2008-Aug-27 03:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.524 (still bad) 2008-Aug-27 03:46:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 03:46:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.500 1.205 1.458 1.422 2008-Aug-27 03:46:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.280 1.303 1.465 1.287 2008-Aug-27 03:46:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.523 1.284 1.489 1.277 2008-Aug-27 03:46:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.322 0.099 1.442 0.110 2008-Aug-27 03:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.523 (still bad) 2008-Aug-27 03:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.521 (still bad) 2008-Aug-27 03:46:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:46:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:46:25 LOG5 end_task: Level: (4) ID = <10339> Status = 0 0 0 0 ok 2008-Aug-27 03:46:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:46:25 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2008-Aug-27 03:46:25 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Aug-27 03:46:25 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Aug-27 03:46:25 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Aug-27 03:46:25 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:46:25 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65751 J 2008-Aug-27 03:46:25 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:46:25 LOG2 antvel: Parameters to Doppler: Topocentric 27985 2008 240 0.0 2008-Aug-27 03:46:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:46:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Aug-27 03:46:25 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Aug-27 03:46:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:46:25 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:46:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Aug-27 03:46:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:46:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-27 03:46:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:46:25 LOG5 begin_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2008-Aug-27 03:46:25 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.717843 2008.6575146715847 18.999933 2008-Aug-27 03:46:25 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555605 4.258666666666664 2008-Aug-27 03:46:25 LOG4 log_alfabeam: ALFABEAM 1 1.666951045897473 4.364034711360855 2008-Aug-27 03:46:25 LOG4 log_alfabeam: ALFABEAM 2 1.662147878377168 4.297335693846985 2008-Aug-27 03:46:25 LOG4 log_alfabeam: ALFABEAM 3 1.662974791628557 4.191904474568364 2008-Aug-27 03:46:25 LOG4 log_alfabeam: ALFABEAM 4 1.668676883841154 4.153308600761873 2008-Aug-27 03:46:25 LOG4 log_alfabeam: ALFABEAM 5 1.673492095525725 4.220490098683533 2008-Aug-27 03:46:25 LOG4 log_alfabeam: ALFABEAM 6 1.672593189682408 4.325782354208390 2008-Aug-27 03:46:25 INFO2 take_data: Starting WAPP+GALFA scan: 824000057 2008-Aug-27 03:46:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:46:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:46:26 LOG5 begin_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2008-Aug-27 03:46:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:46:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Aug-27 03:46:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:46:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:46:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:46:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27987.00 2008-Aug-27 03:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.522 (still bad) 2008-Aug-27 03:46:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:46:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:46:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:46:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:46:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:46:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.501 (still bad) 2008-Aug-27 03:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.499 (still bad) 2008-Aug-27 03:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.499 (still bad) 2008-Aug-27 03:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.497 (still bad) 2008-Aug-27 03:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.499 (still bad) 2008-Aug-27 03:46:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:46:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:46:37 LOG5 end_task: Level: (4) ID = <10341> Status = 0 0 0 0 ok 2008-Aug-27 03:46:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:46:37 LOG5 end_task: Level: (3) ID = <10340> Status = 0 0 0 0 ok 2008-Aug-27 03:46:37 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Aug-27 03:46:37 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Aug-27 03:46:37 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Aug-27 03:46:37 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:46:37 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65752 J 2008-Aug-27 03:46:37 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:46:37 LOG2 antvel: Parameters to Doppler: Topocentric 27997 2008 240 0.0 2008-Aug-27 03:46:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:46:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Aug-27 03:46:37 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Aug-27 03:46:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:46:37 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:46:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Aug-27 03:46:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:46:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-27 03:46:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:46:37 LOG5 begin_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Aug-27 03:46:37 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.721185 2008.6575150518418 18.999933 2008-Aug-27 03:46:37 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555605 4.258666666666664 2008-Aug-27 03:46:37 LOG4 log_alfabeam: ALFABEAM 1 1.666975092930685 4.364077721014784 2008-Aug-27 03:46:37 LOG4 log_alfabeam: ALFABEAM 2 1.662156730733324 4.297624260766541 2008-Aug-27 03:46:37 LOG4 log_alfabeam: ALFABEAM 3 1.662959591880579 4.192151451267484 2008-Aug-27 03:46:37 LOG4 log_alfabeam: ALFABEAM 4 1.668652842672271 4.153264730704484 2008-Aug-27 03:46:37 LOG4 log_alfabeam: ALFABEAM 5 1.673483349167944 4.220199971758234 2008-Aug-27 03:46:37 LOG4 log_alfabeam: ALFABEAM 6 1.672608478781305 4.325537516645645 2008-Aug-27 03:46:37 INFO2 take_data: Starting WAPP+GALFA scan: 824000058 2008-Aug-27 03:46:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:46:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:46:38 LOG5 begin_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2008-Aug-27 03:46:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:46:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Aug-27 03:46:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:46:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:46:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:46:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 27999.00 2008-Aug-27 03:46:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.499 (still bad) 2008-Aug-27 03:46:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:46:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:46:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:46:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:46:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:46:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.493 (still bad) 2008-Aug-27 03:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.491 (still bad) 2008-Aug-27 03:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.492 (still bad) 2008-Aug-27 03:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.492 (still bad) 2008-Aug-27 03:46:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:46:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:46:49 LOG5 end_task: Level: (4) ID = <10343> Status = 0 0 0 0 ok 2008-Aug-27 03:46:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:46:49 LOG5 end_task: Level: (3) ID = <10342> Status = 0 0 0 0 ok 2008-Aug-27 03:46:49 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Aug-27 03:46:49 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Aug-27 03:46:49 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Aug-27 03:46:49 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:46:49 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65752 J 2008-Aug-27 03:46:49 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:46:49 LOG2 antvel: Parameters to Doppler: Topocentric 28009 2008 240 0.0 2008-Aug-27 03:46:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:46:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Aug-27 03:46:49 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Aug-27 03:46:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:46:49 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:46:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Aug-27 03:46:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:46:49 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-27 03:46:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:46:49 LOG5 begin_task: Level: (3) ID = <10344> Status = 0 0 0 0 ok 2008-Aug-27 03:46:49 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.724528 2008.6575154320988 18.999933 2008-Aug-27 03:46:49 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555540 4.258666666666662 2008-Aug-27 03:46:49 LOG4 log_alfabeam: ALFABEAM 1 1.666999148544390 4.364119501107335 2008-Aug-27 03:46:49 LOG4 log_alfabeam: ALFABEAM 2 1.662165648320484 4.297912359248302 2008-Aug-27 03:46:49 LOG4 log_alfabeam: ALFABEAM 3 1.662944449444996 4.192399189799772 2008-Aug-27 03:46:49 LOG4 log_alfabeam: ALFABEAM 4 1.668628792518588 4.153222089988262 2008-Aug-27 03:46:49 LOG4 log_alfabeam: ALFABEAM 5 1.673474536844749 4.219910301891968 2008-Aug-27 03:46:49 LOG4 log_alfabeam: ALFABEAM 6 1.672623711560904 4.325291907613313 2008-Aug-27 03:46:49 INFO2 take_data: Starting WAPP+GALFA scan: 824000059 2008-Aug-27 03:46:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:46:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:46:50 LOG5 begin_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2008-Aug-27 03:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.491 (still bad) 2008-Aug-27 03:46:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:46:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Aug-27 03:46:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:46:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:46:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:46:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28011.00 2008-Aug-27 03:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.486 (still bad) 2008-Aug-27 03:46:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.489 (still bad) 2008-Aug-27 03:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.490 (still bad) 2008-Aug-27 03:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.488 (still bad) 2008-Aug-27 03:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.488 (still bad) 2008-Aug-27 03:47:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:47:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:47:01 LOG5 end_task: Level: (4) ID = <10345> Status = 0 0 0 0 ok 2008-Aug-27 03:47:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:47:01 LOG5 end_task: Level: (3) ID = <10344> Status = 0 0 0 0 ok 2008-Aug-27 03:47:01 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2008-Aug-27 03:47:01 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2008-Aug-27 03:47:01 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2008-Aug-27 03:47:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 03:47:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 03:47:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 03:47:01 LOG5 begin_task: Level: (3) ID = <10346> Status = 0 0 0 0 ok 2008-Aug-27 03:47:01 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 03:47:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 03:47:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 03:47:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 03:47:01 LOG5 end_task: Level: (3) ID = <10346> Status = 0 0 0 0 ok 2008-Aug-27 03:47:01 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2008-Aug-27 03:47:01 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2008-Aug-27 03:47:01 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2008-Aug-27 03:47:01 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Aug-27 03:47:01 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:47:01 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65752 J 2008-Aug-27 03:47:01 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:47:01 LOG2 antvel: Parameters to Doppler: Topocentric 28021 2008 240 0.0 2008-Aug-27 03:47:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:47:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Aug-27 03:47:01 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Aug-27 03:47:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:47:01 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:47:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Aug-27 03:47:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:47:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-27 03:47:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:47:01 LOG5 begin_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2008-Aug-27 03:47:01 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.727870 2008.657515812356 18.999933 2008-Aug-27 03:47:01 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555584 4.258666666666666 2008-Aug-27 03:47:01 LOG4 log_alfabeam: ALFABEAM 1 1.667023197467004 4.364160026446315 2008-Aug-27 03:47:01 LOG4 log_alfabeam: ALFABEAM 2 1.662174625409995 4.298199807026543 2008-Aug-27 03:47:01 LOG4 log_alfabeam: ALFABEAM 3 1.662929373867251 4.192647532136195 2008-Aug-27 03:47:01 LOG4 log_alfabeam: ALFABEAM 4 1.668604748648822 4.153180704384234 2008-Aug-27 03:47:01 LOG4 log_alfabeam: ALFABEAM 5 1.673465664215171 4.219621272418390 2008-Aug-27 03:47:01 LOG4 log_alfabeam: ALFABEAM 6 1.672638878414481 4.325045683718454 2008-Aug-27 03:47:01 INFO2 take_data: Starting WAPP+GALFA scan: 824000060 2008-Aug-27 03:47:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:47:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:47:02 LOG5 begin_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2008-Aug-27 03:47:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:47:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Aug-27 03:47:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:47:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:47:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.486 (still bad) 2008-Aug-27 03:47:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28023.00 2008-Aug-27 03:47:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:47:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:47:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:47:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:47:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:47:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.118 (still bad) 2008-Aug-27 03:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.116 (still bad) 2008-Aug-27 03:47:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:47:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:47:13 LOG5 end_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2008-Aug-27 03:47:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:47:13 LOG5 end_task: Level: (3) ID = <10347> Status = 0 0 0 0 ok 2008-Aug-27 03:47:13 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2008-Aug-27 03:47:13 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2008-Aug-27 03:47:13 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Aug-27 03:47:13 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:47:13 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65752 J 2008-Aug-27 03:47:13 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:47:13 LOG2 antvel: Parameters to Doppler: Topocentric 28033 2008 240 0.0 2008-Aug-27 03:47:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:47:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Aug-27 03:47:13 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Aug-27 03:47:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:47:13 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:47:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Aug-27 03:47:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:47:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-27 03:47:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:47:13 LOG5 begin_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2008-Aug-27 03:47:13 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.731213 2008.657516192613 18.999933 2008-Aug-27 03:47:13 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555544 4.258666666666664 2008-Aug-27 03:47:13 LOG4 log_alfabeam: ALFABEAM 1 1.667047253210637 4.364199321224552 2008-Aug-27 03:47:13 LOG4 log_alfabeam: ALFABEAM 2 1.662183666973534 4.298486766285320 2008-Aug-27 03:47:13 LOG4 log_alfabeam: ALFABEAM 3 1.662914356604038 4.192896617011828 2008-Aug-27 03:47:13 LOG4 log_alfabeam: ALFABEAM 4 1.668580697553716 4.153140549248612 2008-Aug-27 03:47:13 LOG4 log_alfabeam: ALFABEAM 5 1.673456726362788 4.219332720336251 2008-Aug-27 03:47:13 LOG4 log_alfabeam: ALFABEAM 6 1.672653987931869 4.324798707347461 2008-Aug-27 03:47:13 INFO2 take_data: Starting WAPP+GALFA scan: 824000061 2008-Aug-27 03:47:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:47:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:47:14 LOG5 begin_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2008-Aug-27 03:47:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:47:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Aug-27 03:47:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:47:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:47:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:47:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28035.00 2008-Aug-27 03:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.117 (still bad) 2008-Aug-27 03:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2008-Aug-27 03:47:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-27 03:47:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 03:47:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.110 0.902 1.107 1.070 2008-Aug-27 03:47:21 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.962 1.081 0.946 2008-Aug-27 03:47:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.929 1.091 0.972 2008-Aug-27 03:47:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.960 0.099 1.047 0.110 2008-Aug-27 03:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-27 03:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-27 03:47:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:47:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:47:25 LOG5 end_task: Level: (4) ID = <10350> Status = 0 0 0 0 ok 2008-Aug-27 03:47:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:47:25 LOG5 end_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2008-Aug-27 03:47:25 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2008-Aug-27 03:47:25 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2008-Aug-27 03:47:25 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Aug-27 03:47:25 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:47:25 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65752 J 2008-Aug-27 03:47:25 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:47:25 LOG2 antvel: Parameters to Doppler: Topocentric 28045 2008 240 0.0 2008-Aug-27 03:47:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:47:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Aug-27 03:47:25 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Aug-27 03:47:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:47:25 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:47:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Aug-27 03:47:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:47:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-27 03:47:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:47:25 LOG5 begin_task: Level: (3) ID = <10351> Status = 0 0 0 0 ok 2008-Aug-27 03:47:25 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.734555 2008.65751657287 18.999933 2008-Aug-27 03:47:25 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555571 4.258666666666668 2008-Aug-27 03:47:25 LOG4 log_alfabeam: ALFABEAM 1 1.667071300505405 4.364237362011174 2008-Aug-27 03:47:25 LOG4 log_alfabeam: ALFABEAM 2 1.662192767195315 4.298773055587986 2008-Aug-27 03:47:25 LOG4 log_alfabeam: ALFABEAM 3 1.662899407110841 4.193146285465544 2008-Aug-27 03:47:25 LOG4 log_alfabeam: ALFABEAM 4 1.668556654500602 4.153101648590757 2008-Aug-27 03:47:25 LOG4 log_alfabeam: ALFABEAM 5 1.673447729034729 4.219044828165778 2008-Aug-27 03:47:25 LOG4 log_alfabeam: ALFABEAM 6 1.672669030594542 4.324551136055601 2008-Aug-27 03:47:25 INFO2 take_data: Starting WAPP+GALFA scan: 824000062 2008-Aug-27 03:47:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:47:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:47:26 LOG5 begin_task: Level: (4) ID = <10352> Status = 0 0 0 0 ok 2008-Aug-27 03:47:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:47:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Aug-27 03:47:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:47:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:47:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:47:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28047.00 2008-Aug-27 03:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2008-Aug-27 03:47:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:47:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:47:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:47:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:47:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:47:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2008-Aug-27 03:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-27 03:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2008-Aug-27 03:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-27 03:47:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:47:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:47:37 LOG5 end_task: Level: (4) ID = <10352> Status = 0 0 0 0 ok 2008-Aug-27 03:47:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:47:37 LOG5 end_task: Level: (3) ID = <10351> Status = 0 0 0 0 ok 2008-Aug-27 03:47:37 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2008-Aug-27 03:47:37 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2008-Aug-27 03:47:37 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Aug-27 03:47:37 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:47:37 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65752 J 2008-Aug-27 03:47:37 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:47:37 LOG2 antvel: Parameters to Doppler: Topocentric 28057 2008 240 0.0 2008-Aug-27 03:47:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:47:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Aug-27 03:47:37 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Aug-27 03:47:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:47:37 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:47:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Aug-27 03:47:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:47:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-27 03:47:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:47:37 LOG5 begin_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Aug-27 03:47:37 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.737898 2008.657516953127 18.999933 2008-Aug-27 03:47:37 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555583 4.258666666666663 2008-Aug-27 03:47:37 LOG4 log_alfabeam: ALFABEAM 1 1.667095352864956 4.364274171786117 2008-Aug-27 03:47:37 LOG4 log_alfabeam: ALFABEAM 2 1.662201931108233 4.299058836576020 2008-Aug-27 03:47:37 LOG4 log_alfabeam: ALFABEAM 3 1.662884516904947 4.193396676903135 2008-Aug-27 03:47:37 LOG4 log_alfabeam: ALFABEAM 4 1.668532605978599 4.153063978979684 2008-Aug-27 03:47:37 LOG4 log_alfabeam: ALFABEAM 5 1.673438667252895 4.218757433438213 2008-Aug-27 03:47:37 LOG4 log_alfabeam: ALFABEAM 6 1.672684014932939 4.324302831549366 2008-Aug-27 03:47:37 INFO2 take_data: Starting WAPP+GALFA scan: 824000063 2008-Aug-27 03:47:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:47:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:47:38 LOG5 begin_task: Level: (4) ID = <10354> Status = 0 0 0 0 ok 2008-Aug-27 03:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-27 03:47:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:47:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Aug-27 03:47:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:47:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:47:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:47:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28059.00 2008-Aug-27 03:47:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:47:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:47:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:47:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:47:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:47:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2008-Aug-27 03:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2008-Aug-27 03:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2008-Aug-27 03:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2008-Aug-27 03:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2008-Aug-27 03:47:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:47:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:47:49 LOG5 end_task: Level: (4) ID = <10354> Status = 0 0 0 0 ok 2008-Aug-27 03:47:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:47:49 LOG5 end_task: Level: (3) ID = <10353> Status = 0 0 0 0 ok 2008-Aug-27 03:47:49 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2008-Aug-27 03:47:49 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2008-Aug-27 03:47:49 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Aug-27 03:47:49 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:47:49 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65752 J 2008-Aug-27 03:47:49 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:47:49 LOG2 antvel: Parameters to Doppler: Topocentric 28069 2008 240 0.0 2008-Aug-27 03:47:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:47:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Aug-27 03:47:49 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Aug-27 03:47:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:47:49 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:47:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Aug-27 03:47:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:47:49 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-27 03:47:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:47:49 LOG5 begin_task: Level: (3) ID = <10355> Status = 0 0 0 0 ok 2008-Aug-27 03:47:49 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.741240 2008.657517333384 18.999933 2008-Aug-27 03:47:49 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555585 4.258666666666663 2008-Aug-27 03:47:49 LOG4 log_alfabeam: ALFABEAM 1 1.667119395023744 4.364309728878487 2008-Aug-27 03:47:49 LOG4 log_alfabeam: ALFABEAM 2 1.662211152810792 4.299343928671722 2008-Aug-27 03:47:49 LOG4 log_alfabeam: ALFABEAM 3 1.662869695350455 4.193647631462887 2008-Aug-27 03:47:49 LOG4 log_alfabeam: ALFABEAM 4 1.668508567251139 4.153027562664229 2008-Aug-27 03:47:49 LOG4 log_alfabeam: ALFABEAM 5 1.673429546851136 4.218470717829990 2008-Aug-27 03:47:49 LOG4 log_alfabeam: ALFABEAM 6 1.672698931518328 4.324053952301118 2008-Aug-27 03:47:49 INFO2 take_data: Starting WAPP+GALFA scan: 824000064 2008-Aug-27 03:47:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:47:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:47:50 LOG5 begin_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Aug-27 03:47:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:47:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Aug-27 03:47:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:47:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:47:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2008-Aug-27 03:47:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28071.00 2008-Aug-27 03:47:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:47:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:47:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:47:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:47:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:47:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2008-Aug-27 03:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.084 (still bad) 2008-Aug-27 03:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.081 (still bad) 2008-Aug-27 03:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.083 (still bad) 2008-Aug-27 03:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.083 (still bad) 2008-Aug-27 03:48:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:48:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:48:01 LOG5 end_task: Level: (4) ID = <10356> Status = 0 0 0 0 ok 2008-Aug-27 03:48:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:48:01 LOG5 end_task: Level: (3) ID = <10355> Status = 0 0 0 0 ok 2008-Aug-27 03:48:01 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2008-Aug-27 03:48:01 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2008-Aug-27 03:48:01 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Aug-27 03:48:01 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:48:01 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65752 J 2008-Aug-27 03:48:01 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:48:01 LOG2 antvel: Parameters to Doppler: Topocentric 28081 2008 240 0.0 2008-Aug-27 03:48:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:48:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Aug-27 03:48:01 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Aug-27 03:48:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:48:01 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:48:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Aug-27 03:48:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:48:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-27 03:48:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:48:01 LOG5 begin_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Aug-27 03:48:01 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.744583 2008.6575177136413 18.999933 2008-Aug-27 03:48:01 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555579 4.258666666666664 2008-Aug-27 03:48:01 LOG4 log_alfabeam: ALFABEAM 1 1.667143440495227 4.364344055054582 2008-Aug-27 03:48:01 LOG4 log_alfabeam: ALFABEAM 2 1.662220437396355 4.299628492957346 2008-Aug-27 03:48:01 LOG4 log_alfabeam: ALFABEAM 3 1.662854934026011 4.193899289205231 2008-Aug-27 03:48:01 LOG4 log_alfabeam: ALFABEAM 4 1.668484524807208 4.152992377427156 2008-Aug-27 03:48:01 LOG4 log_alfabeam: ALFABEAM 5 1.673420362790305 4.218184519421786 2008-Aug-27 03:48:01 LOG4 log_alfabeam: ALFABEAM 6 1.672713788820634 4.323804359353321 2008-Aug-27 03:48:01 INFO2 take_data: Starting WAPP+GALFA scan: 824000065 2008-Aug-27 03:48:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:48:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:48:02 LOG5 begin_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2008-Aug-27 03:48:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:48:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Aug-27 03:48:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:48:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:48:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:48:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28083.00 2008-Aug-27 03:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.082 (still bad) 2008-Aug-27 03:48:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:48:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:48:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:48:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:48:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:48:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.077 (still bad) 2008-Aug-27 03:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.079 (still bad) 2008-Aug-27 03:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.079 (still bad) 2008-Aug-27 03:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.079 (still bad) 2008-Aug-27 03:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.080 (still bad) 2008-Aug-27 03:48:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:48:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:48:13 LOG5 end_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2008-Aug-27 03:48:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:48:13 LOG5 end_task: Level: (3) ID = <10357> Status = 0 0 0 0 ok 2008-Aug-27 03:48:13 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2008-Aug-27 03:48:13 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2008-Aug-27 03:48:13 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Aug-27 03:48:13 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:48:13 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65752 J 2008-Aug-27 03:48:13 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:48:13 LOG2 antvel: Parameters to Doppler: Topocentric 28093 2008 240 0.0 2008-Aug-27 03:48:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:48:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Aug-27 03:48:13 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Aug-27 03:48:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:48:13 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:48:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Aug-27 03:48:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:48:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF -' 2008-Aug-27 03:48:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:48:13 LOG5 begin_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2008-Aug-27 03:48:13 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.747925 2008.6575180938983 18.999933 2008-Aug-27 03:48:13 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555585 4.258666666666664 2008-Aug-27 03:48:13 LOG4 log_alfabeam: ALFABEAM 1 1.667167474021272 4.364377130401127 2008-Aug-27 03:48:13 LOG4 log_alfabeam: ALFABEAM 2 1.662229778879154 4.299912349743342 2008-Aug-27 03:48:13 LOG4 log_alfabeam: ALFABEAM 3 1.662840242203263 4.194151489399803 2008-Aug-27 03:48:13 LOG4 log_alfabeam: ALFABEAM 4 1.668460493903453 4.152958443758799 2008-Aug-27 03:48:13 LOG4 log_alfabeam: ALFABEAM 5 1.673411120989749 4.217899019016499 2008-Aug-27 03:48:13 LOG4 log_alfabeam: ALFABEAM 6 1.672728577502455 4.323554212063947 2008-Aug-27 03:48:13 INFO2 take_data: Starting WAPP+GALFA scan: 824000066 2008-Aug-27 03:48:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:48:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:48:14 LOG5 begin_task: Level: (4) ID = <10360> Status = 0 0 0 0 ok 2008-Aug-27 03:48:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:48:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Aug-27 03:48:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:48:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:48:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:48:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28095.00 2008-Aug-27 03:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.080 (still bad) 2008-Aug-27 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.076 (still bad) 2008-Aug-27 03:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.075 (still bad) 2008-Aug-27 03:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.076 (still bad) 2008-Aug-27 03:48:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2008-Aug-27 03:48:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.071 0.878 1.067 1.049 2008-Aug-27 03:48:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.935 0.942 1.032 0.920 2008-Aug-27 03:48:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.908 1.030 0.940 2008-Aug-27 03:48:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.098 1.027 0.109 2008-Aug-27 03:48:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:48:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:48:25 LOG5 end_task: Level: (4) ID = <10360> Status = 0 0 0 0 ok 2008-Aug-27 03:48:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:48:25 LOG5 end_task: Level: (3) ID = <10359> Status = 0 0 0 0 ok 2008-Aug-27 03:48:25 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2008-Aug-27 03:48:25 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2008-Aug-27 03:48:25 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2008-Aug-27 03:48:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 03:48:25 LOG5 begin_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Aug-27 03:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.075 (still bad) 2008-Aug-27 03:48:25 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 03:48:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2008-Aug-27 03:48:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 03:48:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 03:48:25 LOG5 end_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2008-Aug-27 03:48:25 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2008-Aug-27 03:48:25 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2008-Aug-27 03:48:25 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2008-Aug-27 03:48:25 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:48:25 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65752 J 2008-Aug-27 03:48:25 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:48:25 LOG2 antvel: Parameters to Doppler: Topocentric 28105 2008 240 0.0 2008-Aug-27 03:48:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:48:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2008-Aug-27 03:48:25 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2008-Aug-27 03:48:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:48:25 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:48:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Aug-27 03:48:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:48:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-27 03:48:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:48:25 LOG5 begin_task: Level: (3) ID = <10362> Status = 0 0 0 0 ok 2008-Aug-27 03:48:25 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.751268 2008.6575184741553 18.999933 2008-Aug-27 03:48:25 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555584 4.258666666666667 2008-Aug-27 03:48:25 LOG4 log_alfabeam: ALFABEAM 1 1.667191509113518 4.364408975470292 2008-Aug-27 03:48:25 LOG4 log_alfabeam: ALFABEAM 2 1.662239182412289 4.300195659536123 2008-Aug-27 03:48:25 LOG4 log_alfabeam: ALFABEAM 3 1.662825611522785 4.194404372745377 2008-Aug-27 03:48:25 LOG4 log_alfabeam: ALFABEAM 4 1.668436461030164 4.152925740656237 2008-Aug-27 03:48:25 LOG4 log_alfabeam: ALFABEAM 5 1.673401816349705 4.217614055261011 2008-Aug-27 03:48:25 LOG4 log_alfabeam: ALFABEAM 6 1.672743305972507 4.323303370827547 2008-Aug-27 03:48:25 INFO2 take_data: Starting WAPP+GALFA scan: 824000067 2008-Aug-27 03:48:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:48:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:48:26 LOG5 begin_task: Level: (4) ID = <10363> Status = 0 0 0 0 ok 2008-Aug-27 03:48:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:48:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2008-Aug-27 03:48:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:48:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:48:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:48:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28107.00 2008-Aug-27 03:48:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:48:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:48:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:48:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:48:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:48:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.547 (still bad) 2008-Aug-27 03:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.547 (still bad) 2008-Aug-27 03:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.548 (still bad) 2008-Aug-27 03:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.548 (still bad) 2008-Aug-27 03:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.546 (still bad) 2008-Aug-27 03:48:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:48:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:48:37 LOG5 end_task: Level: (4) ID = <10363> Status = 0 0 0 0 ok 2008-Aug-27 03:48:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:48:37 LOG5 end_task: Level: (3) ID = <10362> Status = 0 0 0 0 ok 2008-Aug-27 03:48:37 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2008-Aug-27 03:48:37 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2008-Aug-27 03:48:37 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2008-Aug-27 03:48:37 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:48:37 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65752 J 2008-Aug-27 03:48:37 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:48:37 LOG2 antvel: Parameters to Doppler: Topocentric 28117 2008 240 0.0 2008-Aug-27 03:48:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:48:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2008-Aug-27 03:48:37 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2008-Aug-27 03:48:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:48:37 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:48:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Aug-27 03:48:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:48:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-27 03:48:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:48:37 LOG5 begin_task: Level: (3) ID = <10364> Status = 0 0 0 0 ok 2008-Aug-27 03:48:37 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.754610 2008.6575188544123 18.999933 2008-Aug-27 03:48:37 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555568 4.258666666666666 2008-Aug-27 03:48:37 LOG4 log_alfabeam: ALFABEAM 1 1.667215530523901 4.364439572103171 2008-Aug-27 03:48:37 LOG4 log_alfabeam: ALFABEAM 2 1.662248641927174 4.300478243562993 2008-Aug-27 03:48:37 LOG4 log_alfabeam: ALFABEAM 3 1.662811051162426 4.194657777675266 2008-Aug-27 03:48:37 LOG4 log_alfabeam: ALFABEAM 4 1.668412441434714 4.152894286854401 2008-Aug-27 03:48:37 LOG4 log_alfabeam: ALFABEAM 5 1.673392454873708 4.217329808055546 2008-Aug-27 03:48:37 LOG4 log_alfabeam: ALFABEAM 6 1.672757964985828 4.323051995855809 2008-Aug-27 03:48:37 INFO2 take_data: Starting WAPP+GALFA scan: 824000068 2008-Aug-27 03:48:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:48:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:48:38 LOG5 begin_task: Level: (4) ID = <10365> Status = 0 0 0 0 ok 2008-Aug-27 03:48:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:48:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2008-Aug-27 03:48:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:48:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:48:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:48:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28119.00 2008-Aug-27 03:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.545 (still bad) 2008-Aug-27 03:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.541 (still bad) 2008-Aug-27 03:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.544 (still bad) 2008-Aug-27 03:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.543 (still bad) 2008-Aug-27 03:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.543 (still bad) 2008-Aug-27 03:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.540 (still bad) 2008-Aug-27 03:48:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:48:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:48:49 LOG5 end_task: Level: (4) ID = <10365> Status = 0 0 0 0 ok 2008-Aug-27 03:48:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:48:49 LOG5 end_task: Level: (3) ID = <10364> Status = 0 0 0 0 ok 2008-Aug-27 03:48:49 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2008-Aug-27 03:48:49 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2008-Aug-27 03:48:49 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2008-Aug-27 03:48:49 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:48:49 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65752 J 2008-Aug-27 03:48:49 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:48:49 LOG2 antvel: Parameters to Doppler: Topocentric 28129 2008 240 0.0 2008-Aug-27 03:48:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:48:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2008-Aug-27 03:48:49 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2008-Aug-27 03:48:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:48:49 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:48:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Aug-27 03:48:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:48:49 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-27 03:48:49 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:48:49 LOG5 begin_task: Level: (3) ID = <10366> Status = 0 0 0 0 ok 2008-Aug-27 03:48:49 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.757953 2008.6575192346693 18.999933 2008-Aug-27 03:48:49 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555583 4.258666666666664 2008-Aug-27 03:48:49 LOG4 log_alfabeam: ALFABEAM 1 1.667239551761013 4.364468939637673 2008-Aug-27 03:48:49 LOG4 log_alfabeam: ALFABEAM 2 1.662258162636149 4.300760261738079 2008-Aug-27 03:48:49 LOG4 log_alfabeam: ALFABEAM 3 1.662796552825704 4.194911845510126 2008-Aug-27 03:48:49 LOG4 log_alfabeam: ALFABEAM 4 1.668388421610181 4.152864062564930 2008-Aug-27 03:48:49 LOG4 log_alfabeam: ALFABEAM 5 1.673383031402236 4.217046116629834 2008-Aug-27 03:48:49 LOG4 log_alfabeam: ALFABEAM 6 1.672772562889304 4.322799946911553 2008-Aug-27 03:48:49 INFO2 take_data: Starting WAPP+GALFA scan: 824000069 2008-Aug-27 03:48:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:48:50 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:48:50 LOG5 begin_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Aug-27 03:48:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:48:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2008-Aug-27 03:48:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:48:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:48:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:48:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28131.00 2008-Aug-27 03:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.542 (still bad) 2008-Aug-27 03:48:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:48:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:48:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:48:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:48:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:48:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.537 (still bad) 2008-Aug-27 03:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.538 (still bad) 2008-Aug-27 03:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.537 (still bad) 2008-Aug-27 03:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.536 (still bad) 2008-Aug-27 03:49:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:49:01 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:49:01 LOG5 end_task: Level: (4) ID = <10367> Status = 0 0 0 0 ok 2008-Aug-27 03:49:01 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:49:01 LOG5 end_task: Level: (3) ID = <10366> Status = 0 0 0 0 ok 2008-Aug-27 03:49:01 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2008-Aug-27 03:49:01 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2008-Aug-27 03:49:01 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2008-Aug-27 03:49:01 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:49:01 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65752 J 2008-Aug-27 03:49:01 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:49:01 LOG2 antvel: Parameters to Doppler: Topocentric 28141 2008 240 0.0 2008-Aug-27 03:49:01 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:49:01 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2008-Aug-27 03:49:01 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2008-Aug-27 03:49:01 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:49:01 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:49:01 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Aug-27 03:49:01 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:49:01 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-27 03:49:01 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:49:01 LOG5 begin_task: Level: (3) ID = <10368> Status = 0 0 0 0 ok 2008-Aug-27 03:49:01 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.761295 2008.6575196149265 18.999933 2008-Aug-27 03:49:01 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555582 4.258666666666664 2008-Aug-27 03:49:01 LOG4 log_alfabeam: ALFABEAM 1 1.667263557589369 4.364497061664986 2008-Aug-27 03:49:01 LOG4 log_alfabeam: ALFABEAM 2 1.662267738389005 4.301041536233633 2008-Aug-27 03:49:01 LOG4 log_alfabeam: ALFABEAM 3 1.662782125595285 4.195166413879616 2008-Aug-27 03:49:01 LOG4 log_alfabeam: ALFABEAM 4 1.668364416791666 4.152835084771360 2008-Aug-27 03:49:01 LOG4 log_alfabeam: ALFABEAM 5 1.673373552021322 4.216763159952849 2008-Aug-27 03:49:01 LOG4 log_alfabeam: ALFABEAM 6 1.672787090531572 4.322547385027999 2008-Aug-27 03:49:01 INFO2 take_data: Starting WAPP+GALFA scan: 824000070 2008-Aug-27 03:49:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:49:02 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:49:02 LOG5 begin_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2008-Aug-27 03:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.538 (still bad) 2008-Aug-27 03:49:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:49:02 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2008-Aug-27 03:49:02 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:49:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:49:02 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:49:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28143.00 2008-Aug-27 03:49:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:49:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:49:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:49:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:49:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:49:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:49:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:49:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:49:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.538 (still bad) 2008-Aug-27 03:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.523 (still bad) 2008-Aug-27 03:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.523 (still bad) 2008-Aug-27 03:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.524 (still bad) 2008-Aug-27 03:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.523 (still bad) 2008-Aug-27 03:49:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:49:13 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:49:13 LOG5 end_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2008-Aug-27 03:49:13 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:49:13 LOG5 end_task: Level: (3) ID = <10368> Status = 0 0 0 0 ok 2008-Aug-27 03:49:13 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2008-Aug-27 03:49:13 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2008-Aug-27 03:49:13 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2008-Aug-27 03:49:13 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:49:13 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65752 J 2008-Aug-27 03:49:13 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:49:13 LOG2 antvel: Parameters to Doppler: Topocentric 28153 2008 240 0.0 2008-Aug-27 03:49:13 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:49:13 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2008-Aug-27 03:49:13 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2008-Aug-27 03:49:13 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:49:13 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:49:13 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Aug-27 03:49:13 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:49:13 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-27 03:49:13 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:49:13 LOG5 begin_task: Level: (3) ID = <10370> Status = 0 0 0 0 ok 2008-Aug-27 03:49:13 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.764637 2008.6575199951835 18.999933 2008-Aug-27 03:49:13 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555572 4.258666666666664 2008-Aug-27 03:49:13 LOG4 log_alfabeam: ALFABEAM 1 1.667287554333923 4.364523948448546 2008-Aug-27 03:49:13 LOG4 log_alfabeam: ALFABEAM 2 1.662277371565577 4.301322142492498 2008-Aug-27 03:49:13 LOG4 log_alfabeam: ALFABEAM 3 1.662767765525162 4.195421548284143 2008-Aug-27 03:49:13 LOG4 log_alfabeam: ALFABEAM 4 1.668340420655354 4.152807343015852 2008-Aug-27 03:49:13 LOG4 log_alfabeam: ALFABEAM 5 1.673364014374907 4.216480862223833 2008-Aug-27 03:49:13 LOG4 log_alfabeam: ALFABEAM 6 1.672801551879505 4.322294245183151 2008-Aug-27 03:49:13 INFO2 take_data: Starting WAPP+GALFA scan: 824000071 2008-Aug-27 03:49:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:49:14 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:49:14 LOG5 begin_task: Level: (4) ID = <10371> Status = 0 0 0 0 ok 2008-Aug-27 03:49:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:49:14 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2008-Aug-27 03:49:14 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:49:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:49:14 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.522 (still bad) 2008-Aug-27 03:49:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28155.00 2008-Aug-27 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:49:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.522 (still bad) 2008-Aug-27 03:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.503 (still bad) 2008-Aug-27 03:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.502 (still bad) 2008-Aug-27 03:49:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.502 (still bad) 2008-Aug-27 03:49:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2008-Aug-27 03:49:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.476 1.188 1.435 1.413 2008-Aug-27 03:49:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.276 1.290 1.435 1.261 2008-Aug-27 03:49:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.502 1.273 1.446 1.255 2008-Aug-27 03:49:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.313 0.099 1.432 0.110 2008-Aug-27 03:49:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:49:25 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:49:25 LOG5 end_task: Level: (4) ID = <10371> Status = 0 0 0 0 ok 2008-Aug-27 03:49:25 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:49:25 LOG5 end_task: Level: (3) ID = <10370> Status = 0 0 0 0 ok 2008-Aug-27 03:49:25 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2008-Aug-27 03:49:25 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2008-Aug-27 03:49:25 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2008-Aug-27 03:49:25 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:49:25 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65752 J 2008-Aug-27 03:49:25 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:49:25 LOG2 antvel: Parameters to Doppler: Topocentric 28165 2008 240 0.0 2008-Aug-27 03:49:25 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:49:25 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2008-Aug-27 03:49:25 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2008-Aug-27 03:49:25 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:49:25 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:49:25 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Aug-27 03:49:25 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:49:25 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-27 03:49:25 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:49:25 LOG5 begin_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Aug-27 03:49:25 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.767980 2008.6575203754405 18.999933 2008-Aug-27 03:49:25 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555570 4.258666666666667 2008-Aug-27 03:49:25 LOG4 log_alfabeam: ALFABEAM 1 1.667311548311494 4.364549608905664 2008-Aug-27 03:49:25 LOG4 log_alfabeam: ALFABEAM 2 1.662287064608836 4.301602155247288 2008-Aug-27 03:49:25 LOG4 log_alfabeam: ALFABEAM 3 1.662753468741487 4.195677314859165 2008-Aug-27 03:49:25 LOG4 log_alfabeam: ALFABEAM 4 1.668316426885338 4.152780828187356 2008-Aug-27 03:49:25 LOG4 log_alfabeam: ALFABEAM 5 1.673354416042676 4.216199148342119 2008-Aug-27 03:49:25 LOG4 log_alfabeam: ALFABEAM 6 1.672815950828531 4.322040461707741 2008-Aug-27 03:49:25 INFO2 take_data: Starting WAPP+GALFA scan: 824000072 2008-Aug-27 03:49:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:49:26 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:49:26 LOG5 begin_task: Level: (4) ID = <10373> Status = 0 0 0 0 ok 2008-Aug-27 03:49:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:49:26 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2008-Aug-27 03:49:26 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:49:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:49:26 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:49:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28167.00 2008-Aug-27 03:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.498 (still bad) 2008-Aug-27 03:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:49:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.495 (still bad) 2008-Aug-27 03:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.498 (still bad) 2008-Aug-27 03:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.495 (still bad) 2008-Aug-27 03:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.496 (still bad) 2008-Aug-27 03:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.495 (still bad) 2008-Aug-27 03:49:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:49:37 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:49:37 LOG5 end_task: Level: (4) ID = <10373> Status = 0 0 0 0 ok 2008-Aug-27 03:49:37 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:49:37 LOG5 end_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2008-Aug-27 03:49:37 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2008-Aug-27 03:49:37 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2008-Aug-27 03:49:37 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2008-Aug-27 03:49:37 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:49:37 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65752 J 2008-Aug-27 03:49:37 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:49:37 LOG2 antvel: Parameters to Doppler: Topocentric 28177 2008 240 0.0 2008-Aug-27 03:49:37 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:49:37 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2008-Aug-27 03:49:37 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2008-Aug-27 03:49:37 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:49:37 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:49:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Aug-27 03:49:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:49:37 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON -' 2008-Aug-27 03:49:37 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2008-Aug-27 03:49:37 LOG5 begin_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Aug-27 03:49:37 LOG5 log_alfabeam: Parameters: 1.6678055555555555 4.2586666666666657 1.771322 2008.6575207556975 18.999933 2008-Aug-27 03:49:37 LOG4 log_alfabeam: ALFABEAM 0 1.667805555555578 4.258666666666666 2008-Aug-27 03:49:37 LOG4 log_alfabeam: ALFABEAM 1 1.667335524310607 4.364574029242565 2008-Aug-27 03:49:37 LOG4 log_alfabeam: ALFABEAM 2 1.662296811249427 4.301881398138732 2008-Aug-27 03:49:37 LOG4 log_alfabeam: ALFABEAM 3 1.662739244182220 4.195933550090785 2008-Aug-27 03:49:37 LOG4 log_alfabeam: ALFABEAM 4 1.668292450693519 4.152755554652159 2008-Aug-27 03:49:37 LOG4 log_alfabeam: ALFABEAM 5 1.673344763231877 4.215918195827848 2008-Aug-27 03:49:37 LOG4 log_alfabeam: ALFABEAM 6 1.672830278370335 4.321786196806080 2008-Aug-27 03:49:37 INFO2 take_data: Starting WAPP+GALFA scan: 824000073 2008-Aug-27 03:49:38 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 2008-Aug-27 03:49:38 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2008-Aug-27 03:49:38 LOG5 begin_task: Level: (4) ID = <10375> Status = 0 0 0 0 ok 2008-Aug-27 03:49:38 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2008-Aug-27 03:49:38 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2008-Aug-27 03:49:38 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:49:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:49:38 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:49:38 INFO1 WAPP=1+2+3+4-start_spectra: start sec 28179.00 2008-Aug-27 03:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.495 (still bad) 2008-Aug-27 03:49:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2008-Aug-27 03:49:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:49:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770494 MHz 2008-Aug-27 03:49:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.606188 MHz 2008-Aug-27 03:49:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.649227 MHz 2008-Aug-27 03:49:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:49:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:49:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:49:40 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1750.000000 MHz 2008-Aug-27 03:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.490 (still bad) 2008-Aug-27 03:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.492 (still bad) 2008-Aug-27 03:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.492 (still bad) 2008-Aug-27 03:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.492 (still bad) 2008-Aug-27 03:49:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2008-Aug-27 03:49:49 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2008-Aug-27 03:49:49 LOG5 end_task: Level: (4) ID = <10375> Status = 0 0 0 0 ok 2008-Aug-27 03:49:49 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2008-Aug-27 03:49:49 LOG5 end_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2008-Aug-27 03:49:49 INFO2 smartfreq: Switching off CAL 2008-Aug-27 03:49:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2008-Aug-27 03:49:49 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2008-Aug-27 03:49:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2008-Aug-27 03:49:49 LOG5 begin_task: Level: (3) ID = <10376> Status = 0 0 0 0 ok 2008-Aug-27 03:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.491 (still bad) 2008-Aug-27 03:49:49 LOG3 CALCONTROL-caltrig: Software trigger 2008-Aug-27 03:49:49 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2008-Aug-27 03:49:49 LOG3 got_calcontrol: Received status OK from CALCONTROL 2008-Aug-27 03:49:49 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2008-Aug-27 03:49:49 LOG5 end_task: Level: (3) ID = <10376> Status = 0 0 0 0 ok 2008-Aug-27 03:49:49 INFO3 restore_frequencies: Restoring original frequencies 2008-Aug-27 03:49:49 LOG5 antvel: Calling 'antvel 14004.100000 41531.200000 J 0' 2008-Aug-27 03:49:49 LOG2 antvel: Precessing RA = 01:40:04.1 Dec = +04:15:31.2 Epoch = 2008.65752 J 2008-Aug-27 03:49:49 LOG2 antvel: Computed apparent RA = 01:40:32.6 Dec = +04:18:22.2 2008-Aug-27 03:49:49 LOG2 antvel: Parameters to Doppler: Topocentric 28189 2008 240 0.0 2008-Aug-27 03:49:49 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2008-Aug-27 03:49:49 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2008-Aug-27 03:49:49 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2008-Aug-27 03:49:49 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2008-Aug-27 03:49:49 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2008-Aug-27 03:49:49 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-27 03:49:49 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:49:49 STOP finish_task: Finishing task 'smart frequency switching' 2008-Aug-27 03:49:49 LOG5 finish_task: Level: (2) ID = <10307> Status = 0 0 0 0 ok 2008-Aug-27 03:49:49 DONE finish_task: DONE finished pattern: smart frequency switching 2008-Aug-27 03:49:49 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-27 03:49:49 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2008-Aug-27 03:49:49 LOG5 end_task: Level: (2) ID = <10307> Status = 0 0 0 0 ok 2008-Aug-27 03:49:49 NOTE run_command_file: DONE with command file processing 2008-Aug-27 03:49:49 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2008-Aug-27 03:49:49 STOP finish_task: Finishing task 'running command file 'command_galfacurpos'' 2008-Aug-27 03:49:49 LOG5 finish_task: Level: (1) ID = <10291> Status = 0 0 0 0 ok 2008-Aug-27 03:49:49 DONE finish_task: DONE finished running: command file 'command_galfacurpos' 2008-Aug-27 03:49:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2008-Aug-27 03:49:50 END end_task: Finishing task 'running command file 'command_galfacurpos'' with status 'OK' 2008-Aug-27 03:49:50 LOG5 end_task: Level: (1) ID = <10291> Status = 0 0 0 0 ok 2008-Aug-27 03:49:50 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2008-Aug-27 03:49:50 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2008-Aug-27 03:49:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:49:50 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:49:56 ALERT CIMA-exit_cima: Exiting CIMA ... 2008-Aug-27 03:49:56 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2008-Aug-27 03:49:56 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2010} 2008-Aug-27 03:49:56 LOG3 vw_send: To DATATAKING: mvdata a2010 2008-Aug-27 03:49:56 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2008-Aug-27 03:49:56 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2008-Aug-27 03:49:56 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2008-Aug-27 03:49:56 NOTE CIMA-exit_cima: Cleaning up session ... 2008-Aug-27 03:49:56 LOG4 got_cormsg: From DATATAKING: mvdata a2010 2008-Aug-27 03:49:56 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2008-Aug-27 03:49:57 LOG4 got_cormsg: From DATATAKING: vw% 2008-Aug-27 03:49:57 LOG4 got_cormsg: From DATATAKING: vw%