2010-Apr-30 19:07:17 BEGIN executive: CIMA executive starting ... 2010-Apr-30 19:07:17 NOTE executive: STARTING NEW CIMA SESSION 2010-Apr-30 19:07:17 INFO1 executive: Using CIMA version 3.1.08 'smart' from 2010-02-01 17:44 2010-Apr-30 19:07:17 INFO4 executive: This is an ON-LINE session 2010-Apr-30 19:07:17 INFO4 executive: This is a REMOTE session 2010-Apr-30 19:07:17 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2010-Apr-30 19:07:17 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Becky Koopmann' 2010-Apr-30 19:07:17 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20100430' 2010-Apr-30 19:07:17 LOG2 log_preferences: Currently applied preferences: 2010-Apr-30 19:07:18 LOG2 log_preferences: prefs(dailylog) = daily 2010-Apr-30 19:07:18 LOG2 log_preferences: prefs(offlinelog) = skip 2010-Apr-30 19:07:18 LOG2 log_preferences: prefs(datawindow) = open 2010-Apr-30 19:07:18 LOG2 log_preferences: prefs(limitwarning) = enabled 2010-Apr-30 19:07:18 LOG2 log_preferences: prefs(wappfailure) = abort 2010-Apr-30 19:07:18 LOG2 log_preferences: prefs(helpstyle) = stay-open 2010-Apr-30 19:07:18 LOG2 log_preferences: prefs(logcolours) = full 2010-Apr-30 19:07:18 LOG2 log_preferences: prefs(displaylevel) = INFO5 2010-Apr-30 19:07:18 LOG2 log_preferences: prefs(loglevel) = LOG5 2010-Apr-30 19:07:18 LOG2 log_preferences: prefs(displayformat) = long 2010-Apr-30 19:07:18 LOG2 log_preferences: prefs(logformat) = new 2010-Apr-30 19:07:18 LOG2 log_preferences: prefs(fontsize) = 3 2010-Apr-30 19:07:18 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2010-Apr-30 19:07:18 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2010-Apr-30 19:07:18 ALERT executive: CIMA executive ready 2010-Apr-30 19:07:20 NOTE frontend: CIMA frontend ready 2010-Apr-30 19:07:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:07:22 LOG4 got_cormsg: From DATATAKING: setup 2010-Apr-30 19:07:28 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2010-Apr-30 19:07:28 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2010-Apr-30 19:07:28 LOG4 got_cormsg: From DATATAKING: vw% io 2010-Apr-30 19:07:28 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2010-Apr-30 19:07:28 LOG4 got_cormsg: From DATATAKING: 2010-Apr-30 19:07:28 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2010-Apr-30 19:07:28 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2010-Apr-30 19:07:28 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2010-Apr-30 19:07:28 LOG4 got_cormsg: From DATATAKING: vw% connectall 2010-Apr-30 19:07:28 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2010-Apr-30 19:07:28 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2010-Apr-30 19:07:28 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2010-Apr-30 19:07:28 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2010-Apr-30 19:07:28 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2010-Apr-30 19:07:28 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2010-Apr-30 19:07:28 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2010-Apr-30 19:07:28 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2010-Apr-30 19:07:29 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2010-Apr-30 19:07:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:07:29 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:07:33 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2010-Apr-30 19:07:33 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2010-Apr-30 19:07:33 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-Apr-30 19:07:33 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2010-Apr-30 19:07:33 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Apr-30 19:07:34 NOTE select_receiver: Starting to select receiver ALFA 2010-Apr-30 19:07:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Apr-30 19:07:34 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Apr-30 19:07:34 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Apr-30 19:07:34 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Apr-30 19:07:34 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Apr-30 19:07:34 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Apr-30 19:07:34 DONE finish_task: DONE finished selecting: receiver ALFA 2010-Apr-30 19:07:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Apr-30 19:07:34 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Apr-30 19:07:34 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2010-Apr-30 19:07:34 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Apr-30 19:07:34 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Apr-30 19:07:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:07:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:07:43 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-Apr-30 19:07:43 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-Apr-30 19:07:43 LOG5 restart_wapp: Calling 'restart_wapp' 2010-Apr-30 19:07:43 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-Apr-30 19:07:43 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Apr-30 19:07:43 NOTE restart_wapp: Restarting all WAPPs 2010-Apr-30 19:07:43 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-Apr-30 19:07:43 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-Apr-30 19:07:43 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2010-Apr-30 19:07:43 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-Apr-30 19:07:47 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-Apr-30 19:07:47 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-Apr-30 19:07:47 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-Apr-30 19:07:48 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-Apr-30 19:08:07 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2010.conf' 2010-Apr-30 19:08:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-Apr-30 19:08:07 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-Apr-30 19:08:08 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-Apr-30 19:08:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-Apr-30 19:08:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-Apr-30 19:08:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-Apr-30 19:08:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-Apr-30 19:08:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-Apr-30 19:08:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-Apr-30 19:08:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-Apr-30 19:08:09 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-Apr-30 19:08:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Apr-30 19:08:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Apr-30 19:08:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Apr-30 19:08:09 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Apr-30 19:08:09 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2010-Apr-30 19:08:09 LOG4 exec_msg: From OBSERVER: config_iflo 2010-Apr-30 19:08:09 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-Apr-30 19:08:09 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Apr-30 19:08:09 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-Apr-30 19:08:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-Apr-30 19:08:09 INFO1 config_iflo: Selecting receiver ALFA 2010-Apr-30 19:08:09 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2010-Apr-30 19:08:09 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2010-Apr-30 19:08:09 START begin_task: Starting task 'selecting receiver ALFA' 2010-Apr-30 19:08:09 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Apr-30 19:08:09 NOTE select_receiver: Starting to select receiver ALFA 2010-Apr-30 19:08:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2010-Apr-30 19:08:09 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2010-Apr-30 19:08:09 LOG3 vw_send: To DATATAKING: acvlbical off 2010-Apr-30 19:08:09 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2010-Apr-30 19:08:09 STOP finish_task: Finishing task 'selecting receiver ALFA' 2010-Apr-30 19:08:09 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Apr-30 19:08:09 INFO2 finish_task: DONE finished selecting: receiver ALFA 2010-Apr-30 19:08:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 19:08:09 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2010-Apr-30 19:08:09 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2010-Apr-30 19:08:09 START begin_task: Starting task 'waiting for receiver ALFA' 2010-Apr-30 19:08:09 LOG5 begin_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2010-Apr-30 19:08:09 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2010-Apr-30 19:08:09 LOG5 end_task: Level: (2) ID = <10005> Status = 0 0 0 0 ok 2010-Apr-30 19:08:09 INFO1 config_iflo: Configuring rest of the IF/LO path 2010-Apr-30 19:08:09 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2010-Apr-30 19:08:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 19:08:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 19:08:09 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 19:08:09 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2010-Apr-30 19:08:09 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 19:08:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 19:08:09 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2010-Apr-30 19:08:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 19:08:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 19:08:09 LOG3 vw_send: To DATATAKING: alfafb 1 2010-Apr-30 19:08:09 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2010-Apr-30 19:08:09 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-Apr-30 19:08:09 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-Apr-30 19:08:09 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2010-Apr-30 19:08:09 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2010-Apr-30 19:08:09 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2010-Apr-30 19:08:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Apr-30 19:08:09 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2010-Apr-30 19:08:09 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2010-Apr-30 19:08:09 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-Apr-30 19:08:09 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-Apr-30 19:08:09 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-Apr-30 19:08:09 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-Apr-30 19:08:09 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-Apr-30 19:08:09 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2010-Apr-30 19:08:09 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2010-Apr-30 19:08:09 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2010-Apr-30 19:08:09 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2010-Apr-30 19:08:09 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-Apr-30 19:08:09 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2010-Apr-30 19:08:09 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Apr-30 19:08:10 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-Apr-30 19:08:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Apr-30 19:08:10 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Apr-30 19:08:10 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2010-Apr-30 19:08:10 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-Apr-30 19:08:10 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2010-Apr-30 19:08:10 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2010-Apr-30 19:08:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-Apr-30 19:08:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:08:10 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-Apr-30 19:08:10 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: acvlbical off 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: alfafb 1 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2010-Apr-30 19:08:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:08:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:17 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:18 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:23 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:25 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 19:08:25 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-Apr-30 19:08:25 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2010-Apr-30 19:08:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-Apr-30 19:08:25 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-Apr-30 19:08:25 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Apr-30 19:08:25 DONE finish_task: DONE finished configuration: IF/LO path 2010-Apr-30 19:08:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Apr-30 19:08:25 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-Apr-30 19:08:25 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2010-Apr-30 19:08:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-Apr-30 19:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-Apr-30 19:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-Apr-30 19:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-Apr-30 19:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-Apr-30 19:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-Apr-30 19:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-Apr-30 19:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-Apr-30 19:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-Apr-30 19:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-Apr-30 19:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-Apr-30 19:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-Apr-30 19:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-Apr-30 19:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-Apr-30 19:08:26 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-Apr-30 19:08:26 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2010-Apr-30 19:08:26 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2010-Apr-30 19:08:26 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-Apr-30 19:08:26 LOG5 begin_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2010-Apr-30 19:08:26 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-Apr-30 19:08:26 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-Apr-30 19:08:26 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-Apr-30 19:08:26 START begin_task: Starting task 'selecting calibration port' 2010-Apr-30 19:08:26 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Apr-30 19:08:26 LOG3 vw_send: To DATATAKING: calport 3 2010-Apr-30 19:08:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-Apr-30 19:08:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:08:26 START begin_task: Starting task 'waiting on calport' 2010-Apr-30 19:08:26 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Apr-30 19:08:26 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2010-Apr-30 19:08:26 LOG4 got_cormsg: From DATATAKING: calport 3 2010-Apr-30 19:08:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:08:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:26 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 19:08:26 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-Apr-30 19:08:26 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2010-Apr-30 19:08:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-Apr-30 19:08:26 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-Apr-30 19:08:26 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2010-Apr-30 19:08:26 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 19:08:26 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 19:08:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 19:08:26 LOG5 begin_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2010-Apr-30 19:08:26 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 19:08:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 19:08:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 19:08:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 19:08:26 LOG5 end_task: Level: (2) ID = <10011> Status = 0 0 0 0 ok 2010-Apr-30 19:08:26 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-Apr-30 19:08:26 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-Apr-30 19:08:27 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-Apr-30 19:08:27 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-Apr-30 19:08:27 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-Apr-30 19:08:27 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-Apr-30 19:08:27 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-Apr-30 19:08:27 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-Apr-30 19:08:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:08:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:08:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:08:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:08:27 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-Apr-30 19:08:27 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-Apr-30 19:08:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 19:08:27 LOG5 begin_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2010-Apr-30 19:08:27 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 19:08:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 19:08:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 19:08:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 19:08:27 LOG5 end_task: Level: (2) ID = <10012> Status = 0 0 0 0 ok 2010-Apr-30 19:08:27 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:08:27 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:08:27 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:08:27 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:08:27 STOP finish_task: Finishing task 'configuring WAPPs' 2010-Apr-30 19:08:27 LOG5 finish_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2010-Apr-30 19:08:27 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-Apr-30 19:08:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Apr-30 19:08:27 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-Apr-30 19:08:27 LOG5 end_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2010-Apr-30 19:08:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 19:08:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-Apr-30 19:08:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-Apr-30 19:08:27 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2010-Apr-30 19:08:27 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2010-Apr-30 19:08:27 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Apr-30 19:08:27 LOG5 begin_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2010-Apr-30 19:08:27 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Apr-30 19:08:27 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Apr-30 19:08:27 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2010-Apr-30 19:08:27 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Apr-30 19:08:27 LOG5 finish_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2010-Apr-30 19:08:27 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Apr-30 19:08:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Apr-30 19:08:27 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Apr-30 19:08:27 LOG5 end_task: Level: (1) ID = <10013> Status = 0 0 0 0 ok 2010-Apr-30 19:08:27 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 19:08:28 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0000.fits 2010-Apr-30 19:08:28 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20100430.a2010.0000.fits} 2010-Apr-30 19:08:28 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2010.conf' applied. 2010-Apr-30 19:08:47 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2010-Apr-30 19:08:47 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2010-Apr-30 19:08:47 BEGIN begin_task: Starting task 'adjusting WAPP power' 2010-Apr-30 19:08:47 LOG5 begin_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2010-Apr-30 19:08:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Apr-30 19:08:47 INFO2 adjust_power: Starting to adjust WAPP power 2010-Apr-30 19:08:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Apr-30 19:08:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Apr-30 19:08:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:08:47 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Apr-30 19:08:47 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2010-Apr-30 19:08:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Apr-30 19:08:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:08:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:51 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 19:08:51 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Apr-30 19:08:51 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2010-Apr-30 19:08:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Apr-30 19:08:51 START begin_task: Starting task 'adjusting WAPP power' 2010-Apr-30 19:08:51 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-Apr-30 19:08:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Apr-30 19:08:51 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Apr-30 19:08:51 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Apr-30 19:08:51 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Apr-30 19:08:51 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Apr-30 19:08:51 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Apr-30 19:08:51 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2010-Apr-30 19:08:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Apr-30 19:08:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:51 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 5 dB --- beam 1: 6 6 dB 2010-Apr-30 19:08:51 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 5 dB 2010-Apr-30 19:08:51 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 3 dB --- beam 3: 3 3 dB 2010-Apr-30 19:08:51 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2010-Apr-30 19:08:51 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Apr-30 19:08:51 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Apr-30 19:08:51 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2010-Apr-30 19:08:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.903 1.059 ALFA beam 1: 0.923 0.948 2010-Apr-30 19:08:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.089 1.035 ALFA beam 3: 0.992 0.901 2010-Apr-30 19:08:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.963 0.815 ALFA beam 5: 1.014 0.900 2010-Apr-30 19:08:51 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.036 0.804 ALFA beam 7: 0.899 0.935 2010-Apr-30 19:08:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Apr-30 19:08:51 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-Apr-30 19:08:51 INFO2 finish_task: DONE finished adjusting: WAPP power 2010-Apr-30 19:08:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 19:08:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Apr-30 19:08:51 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2010-Apr-30 19:08:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2010-Apr-30 19:08:52 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Apr-30 19:08:52 LOG5 finish_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2010-Apr-30 19:08:52 DONE finish_task: DONE finished adjusting: WAPP power levels 2010-Apr-30 19:08:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-Apr-30 19:08:52 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Apr-30 19:08:52 LOG5 end_task: Level: (1) ID = <10014> Status = 0 0 0 0 ok 2010-Apr-30 19:08:56 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2010-Apr-30 19:08:56 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift116p3 091700.0 +280239 J 0 Topocentric velocity(optical) 2010-Apr-30 19:08:56 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift116p3 091700.0 +280239 J 0 Topocentric velocity(optical)' 2010-Apr-30 19:08:56 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2010-Apr-30 19:08:56 LOG5 begin_task: Level: (1) ID = <10018> Status = 0 0 0 0 ok 2010-Apr-30 19:08:56 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'Strip44' 2010-Apr-30 19:08:56 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2010-Apr-30 19:08:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift116p3} 2010-Apr-30 19:08:56 INFO5 fixed_driftmap: Start: year = 2010.3307265444773 RA = 09:17:37.9 Dec = +28:00:02.5 2010-Apr-30 19:08:56 NOTE fixed_driftmap: Setting ZA to 9:38:48.8 ... 2010-Apr-30 19:08:56 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 9.65 2010-Apr-30 19:08:56 LOG3 track_source: Calling 'track_source drift116p3 180.0 9.6468972087 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-Apr-30 19:08:56 START begin_task: Starting task 'sending tracking commands' 2010-Apr-30 19:08:56 LOG5 begin_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Apr-30 19:08:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift116p3} INFO {Slewing to source 'drift116p3' ...} 2010-Apr-30 19:08:56 INFO1 track_source: Starting to track drift116p3 2010-Apr-30 19:08:56 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift116p3" 2010-Apr-30 19:08:56 LOG3 vw_send: To DATATAKING: set ra 180.0 2010-Apr-30 19:08:56 LOG3 vw_send: To DATATAKING: set dec 9.6468972087 2010-Apr-30 19:08:56 LOG3 vw_send: To DATATAKING: pnt tr send 2010-Apr-30 19:08:56 LOG3 vw_send: To DATATAKING: pnt tr 180.0 9.6468972087 -CF 2010-Apr-30 19:08:56 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-Apr-30 19:08:57 STOP finish_task: Finishing task 'sending tracking commands' 2010-Apr-30 19:08:57 LOG5 finish_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Apr-30 19:08:57 INFO2 finish_task: DONE finished sending: tracking commands 2010-Apr-30 19:08:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 19:08:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-Apr-30 19:08:57 LOG5 end_task: Level: (2) ID = <10019> Status = 0 0 0 0 ok 2010-Apr-30 19:08:57 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-Apr-30 19:08:57 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2010-Apr-30 19:08:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-Apr-30 19:08:57 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-Apr-30 19:08:57 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2010-Apr-30 19:08:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-Apr-30 19:08:57 START begin_task: Starting task 'waiting on ALFA rotation' 2010-Apr-30 19:08:57 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Apr-30 19:08:57 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift116p3" 2010-Apr-30 19:08:57 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2010-Apr-30 19:08:57 LOG4 got_cormsg: From DATATAKING: set dec 9.6468972087 2010-Apr-30 19:08:57 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2010-Apr-30 19:08:57 LOG4 got_cormsg: From DATATAKING: vw% 9.6468972087 2010-Apr-30 19:08:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:57 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-Apr-30 19:08:57 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 9.6468972087 -CF 2010-Apr-30 19:08:57 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-Apr-30 19:08:57 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Apr-30 19:08:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:08:57 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-Apr-30 19:08:57 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-Apr-30 19:08:57 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-Apr-30 19:08:57 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2010-Apr-30 19:08:57 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Apr-30 19:08:57 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-Apr-30 19:08:57 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2010-Apr-30 19:08:57 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-Apr-30 19:08:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 19:08:57 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-Apr-30 19:08:57 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2010-Apr-30 19:08:58 START begin_task: Starting task 'waiting on telescope' 2010-Apr-30 19:08:58 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2010-Apr-30 19:08:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-Apr-30 19:08:58 LOG3 waittrk: Start waittrk 5 2010-Apr-30 19:08:58 START begin_task: Starting task 'waiting on telescope movement' 2010-Apr-30 19:08:58 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2010-Apr-30 19:09:03 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-Apr-30 19:09:03 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2010-Apr-30 19:09:03 START begin_task: Starting task 'waiting on telescope on source' 2010-Apr-30 19:09:03 LOG5 begin_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2010-Apr-30 19:09:11 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-Apr-30 19:09:11 LOG5 end_task: Level: (3) ID = <10024> Status = 0 0 0 0 ok 2010-Apr-30 19:09:11 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-Apr-30 19:09:11 INFO2 waittrk: Now tracking drift116p3 2010-Apr-30 19:09:11 LOG4 waittrk: Current telescope position: Az = 179.75 ZA = 9.67 2010-Apr-30 19:09:11 STOP finish_task: Finishing task 'waiting on telescope' 2010-Apr-30 19:09:11 LOG5 finish_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2010-Apr-30 19:09:11 INFO2 finish_task: DONE finished waiting: telescope on source 2010-Apr-30 19:09:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 19:09:11 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-Apr-30 19:09:11 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2010-Apr-30 19:09:11 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 19:09:11 LOG5 begin_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2010-Apr-30 19:09:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 19:09:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 19:09:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:09:11 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 19:09:11 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2010-Apr-30 19:09:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 19:09:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:09:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:09:11 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 19:09:11 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 19:09:11 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2010-Apr-30 19:09:11 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 19:09:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 19:09:11 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 19:09:11 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 19:09:11 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Apr-30 19:09:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:09:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 19:09:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 19:09:11 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2010-Apr-30 19:09:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 19:09:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 19:09:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 19:09:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 19:09:11 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 19:09:11 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Apr-30 19:09:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 19:09:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 19:09:11 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2010-Apr-30 19:09:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 19:09:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 19:09:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 19:09:11 LOG5 end_task: Level: (2) ID = <10025> Status = 0 0 0 0 ok 2010-Apr-30 19:09:11 LOG5 dopset_later: Calling 'dopset_later 20.203605842644759' 2010-Apr-30 19:09:11 INFO3 dopset_later: Setting Doppler correction for 19:09:31 (20.2 seconds from now) 2010-Apr-30 19:09:11 LOG5 antvel: Calling 'antvel 180.000000 9.646897 F Topocentric 20.203605842644759' 2010-Apr-30 19:09:11 LOG2 antvel: Transforming current Az = 180.00 ZA = 9.65 to apparent RA = 09:17:37.8 Dec = +28:00:02.5 2010-Apr-30 19:09:11 LOG2 antvel: Parameters to Doppler: Topocentric 83371 2010 120 0.0 2010-Apr-30 19:09:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-Apr-30 19:09:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-Apr-30 19:09:11 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-Apr-30 19:09:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-Apr-30 19:09:11 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-Apr-30 19:09:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Apr-30 19:09:12 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Apr-30 19:09:12 START begin_task: Starting task 'adjusting WAPP power' 2010-Apr-30 19:09:12 LOG5 begin_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Apr-30 19:09:12 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-Apr-30 19:09:12 INFO2 adjust_power: Starting to adjust WAPP power 2010-Apr-30 19:09:12 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-Apr-30 19:09:12 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-Apr-30 19:09:12 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:09:12 START begin_task: Starting task 'waiting on adjpwrif2' 2010-Apr-30 19:09:12 LOG5 begin_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Apr-30 19:09:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-Apr-30 19:09:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-Apr-30 19:09:12 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-Apr-30 19:09:12 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:09:12 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-Apr-30 19:09:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:09:15 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 19:09:15 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-Apr-30 19:09:15 LOG5 end_task: Level: (3) ID = <10030> Status = 0 0 0 0 ok 2010-Apr-30 19:09:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-Apr-30 19:09:15 START begin_task: Starting task 'adjusting WAPP power' 2010-Apr-30 19:09:15 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2010-Apr-30 19:09:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-Apr-30 19:09:15 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-Apr-30 19:09:15 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-Apr-30 19:09:15 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-Apr-30 19:09:15 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-Apr-30 19:09:15 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-Apr-30 19:09:15 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Apr-30 19:09:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-Apr-30 19:09:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:09:15 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 5 dB --- beam 1: 6 6 dB 2010-Apr-30 19:09:15 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 5 dB 2010-Apr-30 19:09:15 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 2 3 dB --- beam 3: 3 3 dB 2010-Apr-30 19:09:15 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2010-Apr-30 19:09:15 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-Apr-30 19:09:15 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-Apr-30 19:09:15 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2010-Apr-30 19:09:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.917 1.060 ALFA beam 1: 0.918 0.939 2010-Apr-30 19:09:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.096 1.055 ALFA beam 3: 0.995 0.918 2010-Apr-30 19:09:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.981 0.833 ALFA beam 5: 1.011 0.901 2010-Apr-30 19:09:15 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.063 0.822 ALFA beam 7: 0.914 0.953 2010-Apr-30 19:09:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Apr-30 19:09:15 LOG5 finish_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2010-Apr-30 19:09:15 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-Apr-30 19:09:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 19:09:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Apr-30 19:09:15 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2010-Apr-30 19:09:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 19:09:15 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-Apr-30 19:09:15 LOG5 finish_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Apr-30 19:09:15 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-Apr-30 19:09:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 19:09:15 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-Apr-30 19:09:15 LOG5 end_task: Level: (2) ID = <10029> Status = 0 0 0 0 ok 2010-Apr-30 19:09:15 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:17:37.9 LST = 09:17:21.6 diff = 16.2 secs 2010-Apr-30 19:09:15 INFO2 fixed_driftmap: Waiting 14.2 seconds for RA 9:17:38 2010-Apr-30 19:09:15 INFO2 lstwait: Waiting for 14.2 secs from LST 09:17:22 to LST 09:17:36 ... 2010-Apr-30 19:09:16 LOG4 send_obs_status: To obs_status: <1> TASKTIME 14.209616638806626 BITMAP stat_wait MESSAGE {Waiting ...} 2010-Apr-30 19:09:16 START begin_task: Starting task 'waiting on wait on LST' 2010-Apr-30 19:09:16 LOG5 begin_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2010-Apr-30 19:09:30 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2010-Apr-30 19:09:30 LOG5 end_task: Level: (2) ID = <10033> Status = 0 0 0 0 ok 2010-Apr-30 19:09:30 LOG4 lstwait: Finished waiting -0.21 seconds late 2010-Apr-30 19:09:30 INFO3 lstwait: Finished waiting 2010-Apr-30 19:09:30 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-Apr-30 19:09:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:09:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:09:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:09:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:09:30 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20100430.a2010.0000.fits' is empty! 2010-Apr-30 19:09:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2010-Apr-30 19:09:30 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-Apr-30 19:09:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 19:09:30 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 19:09:30 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 19:09:30 LOG5 begin_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2010-Apr-30 19:09:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 19:09:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 19:09:30 INFO2 take_data: Starting WAPP 600-second scan: 12000044 2010-Apr-30 19:09:30 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 19:09:30 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Apr-30 19:09:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 19:09:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 19:09:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 19:09:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83371.00 2010-Apr-30 19:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 19:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:09:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:19:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 19:19:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 19:19:31 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2010-Apr-30 19:19:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 19:19:31 LOG5 end_task: Level: (2) ID = <10034> Status = 0 0 0 0 ok 2010-Apr-30 19:19:31 LOG1 fixed_driftmap: New position: year = 2010.330746666413 RA = 09:27:02.6 RA/Dec = 09:27:40.3 +27:59:56.5 2010-Apr-30 19:19:31 NOTE fixed_driftmap: Correcting ZA to 9:38:42.8 ... 2010-Apr-30 19:19:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6452118237 -CF 2010-Apr-30 19:19:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 19:19:31 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 19:19:31 LOG5 begin_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2010-Apr-30 19:19:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 19:19:31 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 19:19:31 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2010-Apr-30 19:19:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 19:19:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 19:19:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:19:31 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 19:19:31 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2010-Apr-30 19:19:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6452118237 -CF 2010-Apr-30 19:19:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:19:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 19:19:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:19:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:19:31 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 19:19:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 19:19:31 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2010-Apr-30 19:19:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 19:19:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 19:19:31 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 19:19:31 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 19:19:31 LOG5 begin_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2010-Apr-30 19:19:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:19:32 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 19:19:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 19:19:32 LOG5 end_task: Level: (4) ID = <10039> Status = 0 0 0 0 ok 2010-Apr-30 19:19:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 19:19:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 19:19:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 19:19:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 19:19:32 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 19:19:32 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Apr-30 19:19:32 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 19:19:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 19:19:32 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2010-Apr-30 19:19:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 19:19:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 19:19:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 19:19:32 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2010-Apr-30 19:19:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 19:19:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 19:19:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 19:19:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 19:19:32 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Apr-30 19:19:32 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 19:19:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 19:19:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 19:19:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 19:19:32 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2010-Apr-30 19:19:32 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 19:19:32 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 19:19:32 LOG5 begin_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2010-Apr-30 19:19:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 19:19:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 19:19:32 INFO2 take_data: Starting WAPP 1-second scan: 12000045 2010-Apr-30 19:19:32 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 19:19:32 LOG5 begin_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2010-Apr-30 19:19:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 19:19:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 19:19:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83973.00 2010-Apr-30 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:19:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:19:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 19:19:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 19:19:34 LOG5 end_task: Level: (4) ID = <10043> Status = 0 0 0 0 ok 2010-Apr-30 19:19:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 19:19:34 LOG5 end_task: Level: (3) ID = <10042> Status = 0 0 0 0 ok 2010-Apr-30 19:19:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 19:19:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 19:19:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 19:19:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 19:19:34 LOG5 begin_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2010-Apr-30 19:19:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 19:19:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 19:19:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 19:19:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 19:19:34 LOG5 end_task: Level: (3) ID = <10044> Status = 0 0 0 0 ok 2010-Apr-30 19:19:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 19:19:34 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 19:19:34 LOG5 finish_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2010-Apr-30 19:19:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 19:19:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 19:19:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 19:19:34 LOG5 end_task: Level: (2) ID = <10036> Status = 0 0 0 0 ok 2010-Apr-30 19:19:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2010-Apr-30 19:19:34 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-Apr-30 19:19:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:19:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:19:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:19:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:19:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 19:19:35 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 19:19:35 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 19:19:35 LOG5 begin_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2010-Apr-30 19:19:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 19:19:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 19:19:35 INFO2 take_data: Starting WAPP 600-second scan: 12000046 2010-Apr-30 19:19:35 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 19:19:35 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2010-Apr-30 19:19:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 19:19:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 19:19:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 19:19:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83976.00 2010-Apr-30 19:19:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0001.fits 2010-Apr-30 19:19:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0001.fits} 2010-Apr-30 19:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 19:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:19:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:29:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 19:29:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 19:29:36 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2010-Apr-30 19:29:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 19:29:36 LOG5 end_task: Level: (2) ID = <10045> Status = 0 0 0 0 ok 2010-Apr-30 19:29:36 LOG1 fixed_driftmap: New position: year = 2010.3307658377062 RA = 09:37:09.4 RA/Dec = 09:37:46.9 +27:59:50.7 2010-Apr-30 19:29:36 NOTE fixed_driftmap: Correcting ZA to 9:38:37.0 ... 2010-Apr-30 19:29:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6435991562 -CF 2010-Apr-30 19:29:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 19:29:36 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 19:29:36 LOG5 begin_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2010-Apr-30 19:29:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 19:29:36 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 19:29:36 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2010-Apr-30 19:29:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 19:29:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 19:29:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:29:36 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 19:29:36 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2010-Apr-30 19:29:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6435991562 -CF 2010-Apr-30 19:29:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:29:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 19:29:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:29:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:29:36 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 19:29:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 19:29:36 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2010-Apr-30 19:29:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 19:29:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 19:29:36 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 19:29:36 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 19:29:36 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Apr-30 19:29:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:29:37 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 19:29:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 19:29:37 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2010-Apr-30 19:29:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 19:29:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 19:29:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 19:29:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 19:29:37 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 19:29:37 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2010-Apr-30 19:29:37 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 19:29:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 19:29:37 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2010-Apr-30 19:29:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 19:29:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 19:29:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 19:29:37 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2010-Apr-30 19:29:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 19:29:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 19:29:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 19:29:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 19:29:37 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2010-Apr-30 19:29:37 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 19:29:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 19:29:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 19:29:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 19:29:37 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2010-Apr-30 19:29:37 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 19:29:37 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 19:29:37 LOG5 begin_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Apr-30 19:29:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 19:29:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 19:29:37 INFO2 take_data: Starting WAPP 1-second scan: 12000047 2010-Apr-30 19:29:37 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 19:29:37 LOG5 begin_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2010-Apr-30 19:29:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 19:29:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 19:29:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84578.00 2010-Apr-30 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:29:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:29:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 19:29:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 19:29:39 LOG5 end_task: Level: (4) ID = <10054> Status = 0 0 0 0 ok 2010-Apr-30 19:29:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 19:29:39 LOG5 end_task: Level: (3) ID = <10053> Status = 0 0 0 0 ok 2010-Apr-30 19:29:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 19:29:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 19:29:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 19:29:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 19:29:39 LOG5 begin_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2010-Apr-30 19:29:39 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 19:29:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 19:29:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 19:29:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 19:29:39 LOG5 end_task: Level: (3) ID = <10055> Status = 0 0 0 0 ok 2010-Apr-30 19:29:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 19:29:39 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 19:29:39 LOG5 finish_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2010-Apr-30 19:29:39 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 19:29:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 19:29:39 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 19:29:39 LOG5 end_task: Level: (2) ID = <10047> Status = 0 0 0 0 ok 2010-Apr-30 19:29:39 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2010-Apr-30 19:29:39 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2010-Apr-30 19:29:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:29:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:29:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:29:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:29:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 19:29:40 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 19:29:40 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 19:29:40 LOG5 begin_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2010-Apr-30 19:29:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 19:29:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 19:29:40 INFO2 take_data: Starting WAPP 600-second scan: 12000048 2010-Apr-30 19:29:40 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 19:29:40 LOG5 begin_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2010-Apr-30 19:29:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 19:29:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 19:29:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 19:29:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84581.00 2010-Apr-30 19:29:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0002.fits 2010-Apr-30 19:29:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0002.fits} 2010-Apr-30 19:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 19:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:29:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:39:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 19:39:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 19:39:41 LOG5 end_task: Level: (3) ID = <10057> Status = 0 0 0 0 ok 2010-Apr-30 19:39:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 19:39:41 LOG5 end_task: Level: (2) ID = <10056> Status = 0 0 0 0 ok 2010-Apr-30 19:39:41 LOG1 fixed_driftmap: New position: year = 2010.3307850089993 RA = 09:47:16.3 RA/Dec = 09:47:53.6 +27:59:45.2 2010-Apr-30 19:39:41 NOTE fixed_driftmap: Correcting ZA to 9:38:31.5 ... 2010-Apr-30 19:39:41 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6420746049 -CF 2010-Apr-30 19:39:41 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 19:39:41 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 19:39:41 LOG5 begin_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2010-Apr-30 19:39:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 19:39:41 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 19:39:41 LOG5 begin_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2010-Apr-30 19:39:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 19:39:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 19:39:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:39:41 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 19:39:41 LOG5 begin_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2010-Apr-30 19:39:41 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6420746049 -CF 2010-Apr-30 19:39:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:39:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 19:39:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:39:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:39:41 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 19:39:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 19:39:41 LOG5 end_task: Level: (4) ID = <10060> Status = 0 0 0 0 ok 2010-Apr-30 19:39:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 19:39:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 19:39:41 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 19:39:41 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 19:39:41 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-Apr-30 19:39:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:39:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 19:39:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 19:39:42 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2010-Apr-30 19:39:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 19:39:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 19:39:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 19:39:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 19:39:42 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 19:39:42 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2010-Apr-30 19:39:43 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 19:39:43 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 19:39:43 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2010-Apr-30 19:39:43 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 19:39:43 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 19:39:43 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 19:39:43 LOG5 end_task: Level: (3) ID = <10059> Status = 0 0 0 0 ok 2010-Apr-30 19:39:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 19:39:43 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 19:39:43 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 19:39:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 19:39:43 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2010-Apr-30 19:39:43 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 19:39:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 19:39:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 19:39:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 19:39:43 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2010-Apr-30 19:39:43 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 19:39:43 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 19:39:43 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Apr-30 19:39:43 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 19:39:43 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 19:39:43 INFO2 take_data: Starting WAPP 1-second scan: 12000049 2010-Apr-30 19:39:43 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 19:39:43 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Apr-30 19:39:43 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 19:39:43 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 19:39:43 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85184.00 2010-Apr-30 19:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 19:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:39:45 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:39:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 19:39:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 19:39:45 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2010-Apr-30 19:39:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 19:39:45 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2010-Apr-30 19:39:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 19:39:45 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 19:39:45 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 19:39:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 19:39:45 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Apr-30 19:39:45 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 19:39:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 19:39:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 19:39:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 19:39:45 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2010-Apr-30 19:39:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 19:39:45 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 19:39:45 LOG5 finish_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2010-Apr-30 19:39:45 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 19:39:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 19:39:46 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 19:39:46 LOG5 end_task: Level: (2) ID = <10058> Status = 0 0 0 0 ok 2010-Apr-30 19:39:46 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2010-Apr-30 19:39:46 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2010-Apr-30 19:39:46 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:39:46 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:39:46 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:39:46 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:39:46 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 19:39:46 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 19:39:46 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 19:39:46 LOG5 begin_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2010-Apr-30 19:39:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 19:39:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 19:39:46 INFO2 take_data: Starting WAPP 600-second scan: 12000050 2010-Apr-30 19:39:46 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 19:39:46 LOG5 begin_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Apr-30 19:39:46 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 19:39:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 19:39:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 19:39:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85187.00 2010-Apr-30 19:39:46 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0003.fits 2010-Apr-30 19:39:46 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0003.fits} 2010-Apr-30 19:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 19:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:49:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 19:49:47 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 19:49:47 LOG5 end_task: Level: (3) ID = <10068> Status = 0 0 0 0 ok 2010-Apr-30 19:49:47 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 19:49:47 LOG5 end_task: Level: (2) ID = <10067> Status = 0 0 0 0 ok 2010-Apr-30 19:49:47 LOG1 fixed_driftmap: New position: year = 2010.3308042119806 RA = 09:57:24.2 RA/Dec = 09:58:01.2 +27:59:40.0 2010-Apr-30 19:49:47 NOTE fixed_driftmap: Correcting ZA to 9:38:26.3 ... 2010-Apr-30 19:49:47 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6406388173 -CF 2010-Apr-30 19:49:47 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 19:49:47 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 19:49:47 LOG5 begin_task: Level: (2) ID = <10069> Status = 0 0 0 0 ok 2010-Apr-30 19:49:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 19:49:47 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 19:49:47 LOG5 begin_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2010-Apr-30 19:49:47 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 19:49:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 19:49:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:49:47 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 19:49:47 LOG5 begin_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2010-Apr-30 19:49:47 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6406388173 -CF 2010-Apr-30 19:49:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:49:47 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 19:49:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:49:47 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:49:48 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 19:49:48 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 19:49:48 LOG5 end_task: Level: (4) ID = <10071> Status = 0 0 0 0 ok 2010-Apr-30 19:49:48 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 19:49:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 19:49:48 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 19:49:48 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 19:49:48 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Apr-30 19:49:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:49:48 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 19:49:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 19:49:48 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2010-Apr-30 19:49:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 19:49:48 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 19:49:48 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 19:49:48 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 19:49:48 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 19:49:48 LOG5 begin_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2010-Apr-30 19:49:48 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 19:49:48 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 19:49:48 LOG5 end_task: Level: (4) ID = <10073> Status = 0 0 0 0 ok 2010-Apr-30 19:49:48 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 19:49:48 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 19:49:48 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 19:49:48 LOG5 end_task: Level: (3) ID = <10070> Status = 0 0 0 0 ok 2010-Apr-30 19:49:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 19:49:48 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 19:49:48 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 19:49:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 19:49:48 LOG5 begin_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2010-Apr-30 19:49:48 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 19:49:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 19:49:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 19:49:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 19:49:48 LOG5 end_task: Level: (3) ID = <10074> Status = 0 0 0 0 ok 2010-Apr-30 19:49:48 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 19:49:48 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 19:49:48 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Apr-30 19:49:48 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 19:49:48 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 19:49:48 INFO2 take_data: Starting WAPP 1-second scan: 12000051 2010-Apr-30 19:49:48 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 19:49:48 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-Apr-30 19:49:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 19:49:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 19:49:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85789.00 2010-Apr-30 19:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 19:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:49:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:49:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 19:49:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 19:49:50 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2010-Apr-30 19:49:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 19:49:50 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2010-Apr-30 19:49:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 19:49:50 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 19:49:50 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 19:49:50 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 19:49:50 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Apr-30 19:49:50 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 19:49:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 19:49:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 19:49:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 19:49:50 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2010-Apr-30 19:49:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 19:49:50 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 19:49:50 LOG5 finish_task: Level: (2) ID = <10069> Status = 0 0 0 0 ok 2010-Apr-30 19:49:50 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 19:49:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 19:49:50 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 19:49:50 LOG5 end_task: Level: (2) ID = <10069> Status = 0 0 0 0 ok 2010-Apr-30 19:49:50 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2010-Apr-30 19:49:51 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2010-Apr-30 19:49:51 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:49:51 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:49:51 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:49:51 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:49:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 19:49:51 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 19:49:51 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 19:49:51 LOG5 begin_task: Level: (2) ID = <10078> Status = 0 0 0 0 ok 2010-Apr-30 19:49:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 19:49:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 19:49:51 INFO2 take_data: Starting WAPP 600-second scan: 12000052 2010-Apr-30 19:49:51 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 19:49:51 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Apr-30 19:49:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 19:49:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 19:49:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 19:49:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85792.00 2010-Apr-30 19:49:51 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0004.fits 2010-Apr-30 19:49:51 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0004.fits} 2010-Apr-30 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:59:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 19:59:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 19:59:52 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2010-Apr-30 19:59:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 19:59:52 LOG5 end_task: Level: (2) ID = <10078> Status = 0 0 0 0 ok 2010-Apr-30 19:59:52 LOG1 fixed_driftmap: New position: year = 2010.3308233832736 RA = 10:07:31.1 RA/Dec = 10:08:07.9 +27:59:35.2 2010-Apr-30 19:59:52 NOTE fixed_driftmap: Correcting ZA to 9:38:21.5 ... 2010-Apr-30 19:59:52 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6392993602 -CF 2010-Apr-30 19:59:52 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 19:59:52 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 19:59:52 LOG5 begin_task: Level: (2) ID = <10080> Status = 0 0 0 0 ok 2010-Apr-30 19:59:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 19:59:52 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 19:59:52 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Apr-30 19:59:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 19:59:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 19:59:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:59:52 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 19:59:52 LOG5 begin_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Apr-30 19:59:52 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6392993602 -CF 2010-Apr-30 19:59:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:59:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 19:59:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 19:59:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:59:52 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 19:59:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 19:59:52 LOG5 end_task: Level: (4) ID = <10082> Status = 0 0 0 0 ok 2010-Apr-30 19:59:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 19:59:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 19:59:53 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 19:59:53 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 19:59:53 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2010-Apr-30 19:59:53 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 19:59:53 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 19:59:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 19:59:53 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2010-Apr-30 19:59:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 19:59:53 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 19:59:53 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 19:59:53 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 19:59:53 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 19:59:53 LOG5 begin_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2010-Apr-30 19:59:53 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 19:59:53 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 19:59:53 LOG5 end_task: Level: (4) ID = <10084> Status = 0 0 0 0 ok 2010-Apr-30 19:59:53 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 19:59:53 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 19:59:53 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 19:59:53 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2010-Apr-30 19:59:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 19:59:53 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 19:59:53 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 19:59:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 19:59:53 LOG5 begin_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-Apr-30 19:59:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 19:59:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 19:59:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 19:59:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 19:59:53 LOG5 end_task: Level: (3) ID = <10085> Status = 0 0 0 0 ok 2010-Apr-30 19:59:53 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 19:59:53 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 19:59:53 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Apr-30 19:59:53 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 19:59:53 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 19:59:53 INFO2 take_data: Starting WAPP 1-second scan: 12000053 2010-Apr-30 19:59:54 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 19:59:54 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Apr-30 19:59:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 19:59:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 19:59:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86395.00 2010-Apr-30 19:59:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 19:59:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:59:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:59:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:59:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:59:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:59:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:59:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:59:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:59:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 19:59:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 19:59:56 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2010-Apr-30 19:59:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 19:59:56 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2010-Apr-30 19:59:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 19:59:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 19:59:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 19:59:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 19:59:56 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Apr-30 19:59:56 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 19:59:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 19:59:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 19:59:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 19:59:56 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2010-Apr-30 19:59:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 19:59:56 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 19:59:56 LOG5 finish_task: Level: (2) ID = <10080> Status = 0 0 0 0 ok 2010-Apr-30 19:59:56 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 19:59:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 19:59:56 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 19:59:56 LOG5 end_task: Level: (2) ID = <10080> Status = 0 0 0 0 ok 2010-Apr-30 19:59:56 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 6 of 99 2010-Apr-30 19:59:57 LOG4 send_obs_status: To obs_status: <1> LOOP 6 2010-Apr-30 19:59:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:59:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:59:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:59:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 19:59:57 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 19:59:57 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 19:59:57 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 19:59:57 LOG5 begin_task: Level: (2) ID = <10089> Status = 0 0 0 0 ok 2010-Apr-30 19:59:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 19:59:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 19:59:57 INFO2 take_data: Starting WAPP 600-second scan: 12000054 2010-Apr-30 19:59:57 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 19:59:57 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Apr-30 19:59:57 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 19:59:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 19:59:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86398.00 2010-Apr-30 19:59:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 19:59:57 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0005.fits 2010-Apr-30 19:59:57 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0005.fits} 2010-Apr-30 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 19:59:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:09:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 20:09:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 20:09:58 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2010-Apr-30 20:09:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 20:09:58 LOG5 end_task: Level: (2) ID = <10089> Status = 0 0 0 0 ok 2010-Apr-30 20:09:58 LOG1 fixed_driftmap: New position: year = 2010.3308425862549 RA = 10:17:39.0 RA/Dec = 10:18:15.5 +27:59:30.7 2010-Apr-30 20:09:58 NOTE fixed_driftmap: Correcting ZA to 9:38:17.0 ... 2010-Apr-30 20:09:58 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6380544027 -CF 2010-Apr-30 20:09:58 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 20:09:58 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 20:09:58 LOG5 begin_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2010-Apr-30 20:09:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 20:09:58 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 20:09:58 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Apr-30 20:09:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 20:09:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 20:09:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 20:09:58 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 20:09:58 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-Apr-30 20:09:58 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6380544027 -CF 2010-Apr-30 20:09:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 20:09:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 20:09:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 20:09:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 20:09:58 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 20:09:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 20:09:58 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2010-Apr-30 20:09:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 20:09:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 20:09:58 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 20:09:58 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 20:09:58 LOG5 begin_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2010-Apr-30 20:09:59 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 20:09:59 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 20:09:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 20:09:59 LOG5 end_task: Level: (4) ID = <10094> Status = 0 0 0 0 ok 2010-Apr-30 20:09:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 20:09:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 20:09:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 20:09:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 20:09:59 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 20:09:59 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Apr-30 20:09:59 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 20:09:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 20:09:59 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2010-Apr-30 20:09:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 20:09:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 20:09:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 20:09:59 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2010-Apr-30 20:09:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 20:09:59 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 20:09:59 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 20:09:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 20:09:59 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Apr-30 20:09:59 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 20:09:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 20:09:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 20:09:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 20:09:59 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2010-Apr-30 20:09:59 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 20:09:59 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 20:09:59 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2010-Apr-30 20:09:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 20:09:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 20:09:59 INFO2 take_data: Starting WAPP 1-second scan: 12000055 2010-Apr-30 20:09:59 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 20:09:59 LOG5 begin_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2010-Apr-30 20:09:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 20:09:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 20:09:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 600.00 2010-Apr-30 20:10:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 20:10:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:10:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:10:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:10:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:10:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:10:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:10:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:10:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:10:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 20:10:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 20:10:01 LOG5 end_task: Level: (4) ID = <10098> Status = 0 0 0 0 ok 2010-Apr-30 20:10:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 20:10:01 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2010-Apr-30 20:10:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 20:10:01 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 20:10:01 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 20:10:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 20:10:01 LOG5 begin_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2010-Apr-30 20:10:01 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 20:10:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 20:10:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 20:10:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 20:10:01 LOG5 end_task: Level: (3) ID = <10099> Status = 0 0 0 0 ok 2010-Apr-30 20:10:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 20:10:01 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 20:10:01 LOG5 finish_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2010-Apr-30 20:10:01 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 20:10:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 20:10:01 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 20:10:01 LOG5 end_task: Level: (2) ID = <10091> Status = 0 0 0 0 ok 2010-Apr-30 20:10:01 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 7 of 99 2010-Apr-30 20:10:01 LOG4 send_obs_status: To obs_status: <1> LOOP 7 2010-Apr-30 20:10:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:10:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:10:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:10:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:10:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 20:10:02 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 20:10:02 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 20:10:02 LOG5 begin_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2010-Apr-30 20:10:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 20:10:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 20:10:02 INFO2 take_data: Starting WAPP 600-second scan: 12000056 2010-Apr-30 20:10:02 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 20:10:02 LOG5 begin_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2010-Apr-30 20:10:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 20:10:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 20:10:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 20:10:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 603.00 2010-Apr-30 20:10:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0006.fits 2010-Apr-30 20:10:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0006.fits} 2010-Apr-30 20:10:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 20:10:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:10:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:10:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:10:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:10:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:10:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:10:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:10:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:20:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 20:20:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 20:20:03 LOG5 end_task: Level: (3) ID = <10101> Status = 0 0 0 0 ok 2010-Apr-30 20:20:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 20:20:03 LOG5 end_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2010-Apr-30 20:20:03 LOG1 fixed_driftmap: New position: year = 2010.3308617575481 RA = 10:27:45.9 RA/Dec = 10:28:22.2 +27:59:26.6 2010-Apr-30 20:20:03 NOTE fixed_driftmap: Correcting ZA to 9:38:12.9 ... 2010-Apr-30 20:20:03 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6369104917 -CF 2010-Apr-30 20:20:03 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 20:20:03 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 20:20:03 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-Apr-30 20:20:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 20:20:03 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 20:20:03 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2010-Apr-30 20:20:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 20:20:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 20:20:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 20:20:03 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 20:20:03 LOG5 begin_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2010-Apr-30 20:20:03 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6369104917 -CF 2010-Apr-30 20:20:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 20:20:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 20:20:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 20:20:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 20:20:03 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 20:20:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 20:20:03 LOG5 end_task: Level: (4) ID = <10104> Status = 0 0 0 0 ok 2010-Apr-30 20:20:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 20:20:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 20:20:03 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 20:20:03 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 20:20:03 LOG5 begin_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2010-Apr-30 20:20:03 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 20:20:04 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 20:20:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 20:20:04 LOG5 end_task: Level: (4) ID = <10105> Status = 0 0 0 0 ok 2010-Apr-30 20:20:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 20:20:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 20:20:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 20:20:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 20:20:04 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 20:20:04 LOG5 begin_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2010-Apr-30 20:20:04 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 20:20:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 20:20:04 LOG5 end_task: Level: (4) ID = <10106> Status = 0 0 0 0 ok 2010-Apr-30 20:20:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 20:20:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 20:20:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 20:20:04 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2010-Apr-30 20:20:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 20:20:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 20:20:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 20:20:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 20:20:04 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-Apr-30 20:20:04 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 20:20:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 20:20:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 20:20:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 20:20:04 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2010-Apr-30 20:20:04 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 20:20:04 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 20:20:04 LOG5 begin_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2010-Apr-30 20:20:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 20:20:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 20:20:04 INFO2 take_data: Starting WAPP 1-second scan: 12000057 2010-Apr-30 20:20:04 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 20:20:04 LOG5 begin_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2010-Apr-30 20:20:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 20:20:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 20:20:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1205.00 2010-Apr-30 20:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 20:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:20:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:20:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 20:20:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 20:20:06 LOG5 end_task: Level: (4) ID = <10109> Status = 0 0 0 0 ok 2010-Apr-30 20:20:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 20:20:06 LOG5 end_task: Level: (3) ID = <10108> Status = 0 0 0 0 ok 2010-Apr-30 20:20:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 20:20:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 20:20:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 20:20:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 20:20:06 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2010-Apr-30 20:20:06 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 20:20:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 20:20:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 20:20:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 20:20:06 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2010-Apr-30 20:20:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 20:20:06 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 20:20:06 LOG5 finish_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-Apr-30 20:20:06 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 20:20:06 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 20:20:06 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 20:20:06 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2010-Apr-30 20:20:06 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 8 of 99 2010-Apr-30 20:20:06 LOG4 send_obs_status: To obs_status: <1> LOOP 8 2010-Apr-30 20:20:06 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:20:06 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:20:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:20:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:20:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 20:20:07 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 20:20:07 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 20:20:07 LOG5 begin_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Apr-30 20:20:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 20:20:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 20:20:07 INFO2 take_data: Starting WAPP 600-second scan: 12000058 2010-Apr-30 20:20:07 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 20:20:07 LOG5 begin_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2010-Apr-30 20:20:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 20:20:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 20:20:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 20:20:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1208.00 2010-Apr-30 20:20:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0007.fits 2010-Apr-30 20:20:07 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0007.fits} 2010-Apr-30 20:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 20:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:20:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:30:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 20:30:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 20:30:08 LOG5 end_task: Level: (3) ID = <10112> Status = 0 0 0 0 ok 2010-Apr-30 20:30:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 20:30:08 LOG5 end_task: Level: (2) ID = <10111> Status = 0 0 0 0 ok 2010-Apr-30 20:30:08 LOG1 fixed_driftmap: New position: year = 2010.3308809288412 RA = 10:37:52.8 RA/Dec = 10:38:28.9 +27:59:22.8 2010-Apr-30 20:30:08 NOTE fixed_driftmap: Correcting ZA to 9:38:09.1 ... 2010-Apr-30 20:30:08 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6358677184 -CF 2010-Apr-30 20:30:08 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 20:30:08 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 20:30:08 LOG5 begin_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Apr-30 20:30:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 20:30:08 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 20:30:08 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-Apr-30 20:30:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 20:30:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 20:30:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 20:30:08 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 20:30:08 LOG5 begin_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2010-Apr-30 20:30:08 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6358677184 -CF 2010-Apr-30 20:30:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 20:30:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 20:30:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 20:30:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 20:30:08 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 20:30:08 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 20:30:08 LOG5 end_task: Level: (4) ID = <10115> Status = 0 0 0 0 ok 2010-Apr-30 20:30:08 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 20:30:08 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 20:30:08 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 20:30:08 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 20:30:08 LOG5 begin_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2010-Apr-30 20:30:08 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 20:30:09 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 20:30:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 20:30:09 LOG5 end_task: Level: (4) ID = <10116> Status = 0 0 0 0 ok 2010-Apr-30 20:30:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 20:30:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 20:30:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 20:30:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 20:30:09 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 20:30:09 LOG5 begin_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2010-Apr-30 20:30:09 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 20:30:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 20:30:09 LOG5 end_task: Level: (4) ID = <10117> Status = 0 0 0 0 ok 2010-Apr-30 20:30:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 20:30:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 20:30:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 20:30:09 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2010-Apr-30 20:30:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 20:30:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 20:30:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 20:30:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 20:30:09 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-Apr-30 20:30:09 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 20:30:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 20:30:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 20:30:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 20:30:09 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2010-Apr-30 20:30:09 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 20:30:09 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 20:30:09 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-Apr-30 20:30:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 20:30:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 20:30:09 INFO2 take_data: Starting WAPP 1-second scan: 12000059 2010-Apr-30 20:30:09 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 20:30:09 LOG5 begin_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2010-Apr-30 20:30:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 20:30:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 20:30:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1810.00 2010-Apr-30 20:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 20:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:30:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:30:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 20:30:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 20:30:11 LOG5 end_task: Level: (4) ID = <10120> Status = 0 0 0 0 ok 2010-Apr-30 20:30:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 20:30:11 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2010-Apr-30 20:30:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 20:30:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 20:30:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 20:30:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 20:30:11 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-Apr-30 20:30:12 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 20:30:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 20:30:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 20:30:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 20:30:12 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2010-Apr-30 20:30:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 20:30:12 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 20:30:12 LOG5 finish_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Apr-30 20:30:12 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 20:30:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 20:30:12 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 20:30:12 LOG5 end_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2010-Apr-30 20:30:12 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 9 of 99 2010-Apr-30 20:30:12 LOG4 send_obs_status: To obs_status: <1> LOOP 9 2010-Apr-30 20:30:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:30:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:30:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:30:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:30:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 20:30:12 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 20:30:12 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 20:30:12 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2010-Apr-30 20:30:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 20:30:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 20:30:12 INFO2 take_data: Starting WAPP 600-second scan: 12000060 2010-Apr-30 20:30:12 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 20:30:12 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-Apr-30 20:30:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 20:30:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 20:30:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 20:30:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 1813.00 2010-Apr-30 20:30:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0008.fits 2010-Apr-30 20:30:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0008.fits} 2010-Apr-30 20:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 20:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:30:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:40:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 20:40:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 20:40:13 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2010-Apr-30 20:40:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 20:40:13 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2010-Apr-30 20:40:13 LOG1 fixed_driftmap: New position: year = 2010.3309001001344 RA = 10:47:59.7 RA/Dec = 10:48:35.5 +27:59:19.4 2010-Apr-30 20:40:13 NOTE fixed_driftmap: Correcting ZA to 9:38:05.7 ... 2010-Apr-30 20:40:13 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6349281147 -CF 2010-Apr-30 20:40:13 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 20:40:13 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 20:40:13 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2010-Apr-30 20:40:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 20:40:13 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 20:40:13 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Apr-30 20:40:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 20:40:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 20:40:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 20:40:13 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 20:40:13 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2010-Apr-30 20:40:13 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6349281147 -CF 2010-Apr-30 20:40:13 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 20:40:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 20:40:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 20:40:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 20:40:14 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 20:40:14 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 20:40:14 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 0 ok 2010-Apr-30 20:40:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 20:40:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 20:40:14 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 20:40:14 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 20:40:14 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2010-Apr-30 20:40:14 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 20:40:14 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 20:40:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 20:40:14 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2010-Apr-30 20:40:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 20:40:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 20:40:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 20:40:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 20:40:14 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 20:40:14 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2010-Apr-30 20:40:14 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 20:40:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 20:40:14 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2010-Apr-30 20:40:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 20:40:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 20:40:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 20:40:14 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2010-Apr-30 20:40:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 20:40:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 20:40:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 20:40:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 20:40:14 LOG5 begin_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Apr-30 20:40:14 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 20:40:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 20:40:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 20:40:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 20:40:14 LOG5 end_task: Level: (3) ID = <10129> Status = 0 0 0 0 ok 2010-Apr-30 20:40:14 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 20:40:14 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 20:40:14 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-Apr-30 20:40:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 20:40:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 20:40:14 INFO2 take_data: Starting WAPP 1-second scan: 12000061 2010-Apr-30 20:40:15 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 20:40:15 LOG5 begin_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2010-Apr-30 20:40:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 20:40:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 20:40:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2416.00 2010-Apr-30 20:40:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 20:40:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:40:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:40:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:40:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:40:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:40:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:40:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:40:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:40:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 20:40:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 20:40:17 LOG5 end_task: Level: (4) ID = <10131> Status = 0 0 0 0 ok 2010-Apr-30 20:40:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 20:40:17 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2010-Apr-30 20:40:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 20:40:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 20:40:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 20:40:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 20:40:17 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-Apr-30 20:40:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 20:40:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 20:40:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 20:40:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 20:40:17 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2010-Apr-30 20:40:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 20:40:17 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 20:40:17 LOG5 finish_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2010-Apr-30 20:40:17 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 20:40:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 20:40:17 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 20:40:17 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2010-Apr-30 20:40:17 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 10 of 99 2010-Apr-30 20:40:17 LOG4 send_obs_status: To obs_status: <1> LOOP 10 2010-Apr-30 20:40:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:40:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:40:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:40:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:40:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 20:40:18 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 20:40:18 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 20:40:18 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2010-Apr-30 20:40:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 20:40:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 20:40:18 INFO2 take_data: Starting WAPP 600-second scan: 12000062 2010-Apr-30 20:40:18 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 20:40:18 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-Apr-30 20:40:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 20:40:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 20:40:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 20:40:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 2419.00 2010-Apr-30 20:40:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0009.fits 2010-Apr-30 20:40:18 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0009.fits} 2010-Apr-30 20:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 20:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:40:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:50:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 20:50:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 20:50:19 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2010-Apr-30 20:50:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 20:50:19 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2010-Apr-30 20:50:19 LOG1 fixed_driftmap: New position: year = 2010.3309193031155 RA = 10:58:07.6 RA/Dec = 10:58:43.2 +27:59:16.4 2010-Apr-30 20:50:19 NOTE fixed_driftmap: Correcting ZA to 9:38:02.7 ... 2010-Apr-30 20:50:19 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6340922233 -CF 2010-Apr-30 20:50:19 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 20:50:19 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 20:50:19 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2010-Apr-30 20:50:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 20:50:19 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 20:50:19 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2010-Apr-30 20:50:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 20:50:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 20:50:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 20:50:19 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 20:50:19 LOG5 begin_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2010-Apr-30 20:50:19 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6340922233 -CF 2010-Apr-30 20:50:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 20:50:19 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 20:50:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 20:50:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 20:50:19 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 20:50:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 20:50:19 LOG5 end_task: Level: (4) ID = <10137> Status = 0 0 0 0 ok 2010-Apr-30 20:50:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 20:50:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 20:50:19 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 20:50:19 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 20:50:19 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-Apr-30 20:50:19 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 20:50:20 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 20:50:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 20:50:20 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2010-Apr-30 20:50:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 20:50:20 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 20:50:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 20:50:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 20:50:20 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 20:50:20 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2010-Apr-30 20:50:20 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 20:50:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 20:50:20 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2010-Apr-30 20:50:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 20:50:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 20:50:20 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 20:50:20 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2010-Apr-30 20:50:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 20:50:20 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 20:50:20 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 20:50:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 20:50:20 LOG5 begin_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Apr-30 20:50:20 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 20:50:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 20:50:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 20:50:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 20:50:20 LOG5 end_task: Level: (3) ID = <10140> Status = 0 0 0 0 ok 2010-Apr-30 20:50:20 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 20:50:20 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 20:50:20 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2010-Apr-30 20:50:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 20:50:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 20:50:20 INFO2 take_data: Starting WAPP 1-second scan: 12000063 2010-Apr-30 20:50:20 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 20:50:20 LOG5 begin_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2010-Apr-30 20:50:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 20:50:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3021.00 2010-Apr-30 20:50:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 20:50:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 20:50:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:50:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:50:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:50:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:50:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:50:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:50:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:50:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:50:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 20:50:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 20:50:22 LOG5 end_task: Level: (4) ID = <10142> Status = 0 0 0 0 ok 2010-Apr-30 20:50:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 20:50:22 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2010-Apr-30 20:50:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 20:50:22 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 20:50:22 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 20:50:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 20:50:22 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2010-Apr-30 20:50:23 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 20:50:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 20:50:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 20:50:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 20:50:23 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2010-Apr-30 20:50:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 20:50:23 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 20:50:23 LOG5 finish_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2010-Apr-30 20:50:23 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 20:50:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 20:50:23 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 20:50:23 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2010-Apr-30 20:50:23 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 11 of 99 2010-Apr-30 20:50:23 LOG4 send_obs_status: To obs_status: <1> LOOP 11 2010-Apr-30 20:50:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:50:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:50:23 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:50:23 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 20:50:23 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 20:50:23 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 20:50:23 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 20:50:23 LOG5 begin_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2010-Apr-30 20:50:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 20:50:23 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 20:50:23 INFO2 take_data: Starting WAPP 600-second scan: 12000064 2010-Apr-30 20:50:23 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 20:50:23 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Apr-30 20:50:23 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 20:50:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 20:50:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 20:50:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3024.00 2010-Apr-30 20:50:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0010.fits 2010-Apr-30 20:50:24 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0010.fits} 2010-Apr-30 20:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 20:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 20:50:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:00:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 21:00:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 21:00:24 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2010-Apr-30 21:00:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 21:00:24 LOG5 end_task: Level: (2) ID = <10144> Status = 0 0 0 0 ok 2010-Apr-30 21:00:24 LOG1 fixed_driftmap: New position: year = 2010.3309384744086 RA = 11:08:14.5 RA/Dec = 11:08:49.8 +27:59:13.8 2010-Apr-30 21:00:24 NOTE fixed_driftmap: Correcting ZA to 9:38:00.1 ... 2010-Apr-30 21:00:24 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6333644294 -CF 2010-Apr-30 21:00:24 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 21:00:24 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 21:00:24 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2010-Apr-30 21:00:24 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 21:00:24 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 21:00:24 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2010-Apr-30 21:00:24 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 21:00:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 21:00:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 21:00:24 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 21:00:24 LOG5 begin_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2010-Apr-30 21:00:24 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6333644294 -CF 2010-Apr-30 21:00:24 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:00:24 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 21:00:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 21:00:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:00:25 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 21:00:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 21:00:25 LOG5 end_task: Level: (4) ID = <10148> Status = 0 0 0 0 ok 2010-Apr-30 21:00:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 21:00:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 21:00:25 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 21:00:25 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 21:00:25 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2010-Apr-30 21:00:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:00:25 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 21:00:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 21:00:25 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2010-Apr-30 21:00:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 21:00:25 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 21:00:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 21:00:25 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 21:00:25 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 21:00:25 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2010-Apr-30 21:00:25 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 21:00:25 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 21:00:25 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2010-Apr-30 21:00:25 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 21:00:25 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 21:00:25 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 21:00:25 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2010-Apr-30 21:00:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 21:00:25 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 21:00:25 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 21:00:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 21:00:25 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2010-Apr-30 21:00:25 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 21:00:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 21:00:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 21:00:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 21:00:25 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2010-Apr-30 21:00:25 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 21:00:25 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 21:00:25 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2010-Apr-30 21:00:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 21:00:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 21:00:25 INFO2 take_data: Starting WAPP 1-second scan: 12000065 2010-Apr-30 21:00:26 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 21:00:26 LOG5 begin_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2010-Apr-30 21:00:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 21:00:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 21:00:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3627.00 2010-Apr-30 21:00:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 21:00:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:00:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:00:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:00:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:00:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:00:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:00:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:00:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:00:28 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 21:00:28 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 21:00:28 LOG5 end_task: Level: (4) ID = <10153> Status = 0 0 0 0 ok 2010-Apr-30 21:00:28 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 21:00:28 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2010-Apr-30 21:00:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 21:00:28 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 21:00:28 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 21:00:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 21:00:28 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2010-Apr-30 21:00:28 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 21:00:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 21:00:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 21:00:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 21:00:28 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2010-Apr-30 21:00:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 21:00:28 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 21:00:28 LOG5 finish_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2010-Apr-30 21:00:28 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 21:00:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 21:00:28 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 21:00:28 LOG5 end_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2010-Apr-30 21:00:28 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 12 of 99 2010-Apr-30 21:00:28 LOG4 send_obs_status: To obs_status: <1> LOOP 12 2010-Apr-30 21:00:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:00:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:00:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:00:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:00:29 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 21:00:29 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 21:00:29 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 21:00:29 LOG5 begin_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2010-Apr-30 21:00:29 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 21:00:29 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 21:00:29 INFO2 take_data: Starting WAPP 600-second scan: 12000066 2010-Apr-30 21:00:29 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 21:00:29 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-Apr-30 21:00:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 21:00:29 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 21:00:29 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 21:00:29 INFO1 WAPP=1+2+3+4-start_spectra: start sec 3630.00 2010-Apr-30 21:00:29 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0011.fits 2010-Apr-30 21:00:29 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0011.fits} 2010-Apr-30 21:00:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 21:00:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:00:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:00:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:00:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:00:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:00:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:00:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:00:31 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:10:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 21:10:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 21:10:30 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2010-Apr-30 21:10:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 21:10:30 LOG5 end_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2010-Apr-30 21:10:30 LOG1 fixed_driftmap: New position: year = 2010.3309576773897 RA = 11:18:22.5 RA/Dec = 11:18:57.5 +27:59:11.6 2010-Apr-30 21:10:30 NOTE fixed_driftmap: Correcting ZA to 9:37:57.9 ... 2010-Apr-30 21:10:30 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6327437484 -CF 2010-Apr-30 21:10:30 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 21:10:30 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 21:10:30 LOG5 begin_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2010-Apr-30 21:10:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 21:10:30 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 21:10:30 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-Apr-30 21:10:30 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 21:10:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 21:10:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 21:10:30 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 21:10:30 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-Apr-30 21:10:30 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6327437484 -CF 2010-Apr-30 21:10:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:10:30 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 21:10:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 21:10:30 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:10:30 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 21:10:30 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 21:10:30 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2010-Apr-30 21:10:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 21:10:30 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 21:10:31 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 21:10:31 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 21:10:31 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2010-Apr-30 21:10:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:10:31 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 21:10:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 21:10:31 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2010-Apr-30 21:10:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 21:10:31 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 21:10:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 21:10:31 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 21:10:31 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 21:10:31 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2010-Apr-30 21:10:31 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 21:10:31 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 21:10:31 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2010-Apr-30 21:10:31 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 21:10:31 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 21:10:31 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 21:10:31 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2010-Apr-30 21:10:31 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 21:10:31 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 21:10:31 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 21:10:31 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 21:10:31 LOG5 begin_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Apr-30 21:10:31 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 21:10:31 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 21:10:31 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 21:10:31 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 21:10:31 LOG5 end_task: Level: (3) ID = <10162> Status = 0 0 0 0 ok 2010-Apr-30 21:10:31 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 21:10:31 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 21:10:31 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2010-Apr-30 21:10:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 21:10:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 21:10:31 INFO2 take_data: Starting WAPP 1-second scan: 12000067 2010-Apr-30 21:10:31 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 21:10:31 LOG5 begin_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-Apr-30 21:10:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 21:10:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 21:10:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4232.00 2010-Apr-30 21:10:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 21:10:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:10:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:10:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:10:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:10:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:10:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:10:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:10:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:10:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 21:10:33 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 21:10:33 LOG5 end_task: Level: (4) ID = <10164> Status = 0 0 0 0 ok 2010-Apr-30 21:10:33 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 21:10:33 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2010-Apr-30 21:10:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 21:10:33 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 21:10:33 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 21:10:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 21:10:33 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2010-Apr-30 21:10:33 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 21:10:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 21:10:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 21:10:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 21:10:33 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2010-Apr-30 21:10:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 21:10:33 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 21:10:33 LOG5 finish_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2010-Apr-30 21:10:33 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 21:10:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 21:10:33 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 21:10:33 LOG5 end_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2010-Apr-30 21:10:33 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 13 of 99 2010-Apr-30 21:10:33 LOG4 send_obs_status: To obs_status: <1> LOOP 13 2010-Apr-30 21:10:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:10:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:10:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:10:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:10:34 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 21:10:34 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 21:10:34 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 21:10:34 LOG5 begin_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2010-Apr-30 21:10:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 21:10:34 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 21:10:34 INFO2 take_data: Starting WAPP 600-second scan: 12000068 2010-Apr-30 21:10:34 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 21:10:34 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-Apr-30 21:10:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 21:10:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 21:10:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 21:10:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4235.00 2010-Apr-30 21:10:34 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0012.fits 2010-Apr-30 21:10:34 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0012.fits} 2010-Apr-30 21:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 21:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:10:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:20:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 21:20:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 21:20:35 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2010-Apr-30 21:20:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 21:20:35 LOG5 end_task: Level: (2) ID = <10166> Status = 0 0 0 0 ok 2010-Apr-30 21:20:35 LOG1 fixed_driftmap: New position: year = 2010.3309768486829 RA = 11:28:29.4 RA/Dec = 11:29:04.1 +27:59:09.7 2010-Apr-30 21:20:35 NOTE fixed_driftmap: Correcting ZA to 9:37:56.0 ... 2010-Apr-30 21:20:35 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6322334469 -CF 2010-Apr-30 21:20:35 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 21:20:35 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 21:20:35 LOG5 begin_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2010-Apr-30 21:20:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 21:20:35 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 21:20:35 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Apr-30 21:20:35 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 21:20:35 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 21:20:35 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 21:20:35 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 21:20:35 LOG5 begin_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-Apr-30 21:20:35 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6322334469 -CF 2010-Apr-30 21:20:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:20:35 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 21:20:35 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 21:20:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:20:35 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 21:20:35 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 21:20:35 LOG5 end_task: Level: (4) ID = <10170> Status = 0 0 0 0 ok 2010-Apr-30 21:20:35 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 21:20:35 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 21:20:35 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 21:20:35 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 21:20:35 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-Apr-30 21:20:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:20:36 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 21:20:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 21:20:36 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2010-Apr-30 21:20:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 21:20:36 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 21:20:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 21:20:36 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 21:20:36 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 21:20:36 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2010-Apr-30 21:20:36 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 21:20:36 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 21:20:36 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2010-Apr-30 21:20:36 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 21:20:36 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 21:20:36 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 21:20:36 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2010-Apr-30 21:20:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 21:20:36 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 21:20:36 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 21:20:36 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 21:20:36 LOG5 begin_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Apr-30 21:20:36 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 21:20:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 21:20:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 21:20:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 21:20:36 LOG5 end_task: Level: (3) ID = <10173> Status = 0 0 0 0 ok 2010-Apr-30 21:20:36 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 21:20:36 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 21:20:36 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2010-Apr-30 21:20:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 21:20:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 21:20:36 INFO2 take_data: Starting WAPP 1-second scan: 12000069 2010-Apr-30 21:20:36 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 21:20:36 LOG5 begin_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2010-Apr-30 21:20:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 21:20:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 21:20:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4837.00 2010-Apr-30 21:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 21:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:20:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:20:38 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 21:20:38 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 21:20:38 LOG5 end_task: Level: (4) ID = <10175> Status = 0 0 0 0 ok 2010-Apr-30 21:20:38 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 21:20:38 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2010-Apr-30 21:20:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 21:20:38 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 21:20:38 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 21:20:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 21:20:38 LOG5 begin_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2010-Apr-30 21:20:38 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 21:20:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 21:20:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 21:20:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 21:20:38 LOG5 end_task: Level: (3) ID = <10176> Status = 0 0 0 0 ok 2010-Apr-30 21:20:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 21:20:38 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 21:20:38 LOG5 finish_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2010-Apr-30 21:20:38 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 21:20:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 21:20:38 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 21:20:38 LOG5 end_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2010-Apr-30 21:20:38 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 14 of 99 2010-Apr-30 21:20:38 LOG4 send_obs_status: To obs_status: <1> LOOP 14 2010-Apr-30 21:20:38 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:20:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:20:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:20:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:20:39 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 21:20:39 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 21:20:39 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 21:20:39 LOG5 begin_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2010-Apr-30 21:20:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 21:20:39 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 21:20:39 INFO2 take_data: Starting WAPP 600-second scan: 12000070 2010-Apr-30 21:20:39 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 21:20:39 LOG5 begin_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-Apr-30 21:20:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 21:20:39 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 21:20:39 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 21:20:39 INFO1 WAPP=1+2+3+4-start_spectra: start sec 4840.00 2010-Apr-30 21:20:39 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0013.fits 2010-Apr-30 21:20:39 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0013.fits} 2010-Apr-30 21:20:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 21:20:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:20:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:20:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:20:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:20:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:20:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:20:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:20:41 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:30:40 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 21:30:40 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 21:30:40 LOG5 end_task: Level: (3) ID = <10178> Status = 0 0 0 0 ok 2010-Apr-30 21:30:40 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 21:30:40 LOG5 end_task: Level: (2) ID = <10177> Status = 0 0 0 0 ok 2010-Apr-30 21:30:40 LOG1 fixed_driftmap: New position: year = 2010.3309960199761 RA = 11:38:36.3 RA/Dec = 11:39:10.8 +27:59:08.3 2010-Apr-30 21:30:40 NOTE fixed_driftmap: Correcting ZA to 9:37:54.6 ... 2010-Apr-30 21:30:40 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6318333976 -CF 2010-Apr-30 21:30:40 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 21:30:40 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 21:30:40 LOG5 begin_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2010-Apr-30 21:30:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 21:30:40 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 21:30:40 LOG5 begin_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2010-Apr-30 21:30:40 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 21:30:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 21:30:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 21:30:40 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 21:30:40 LOG5 begin_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2010-Apr-30 21:30:40 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6318333976 -CF 2010-Apr-30 21:30:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:30:40 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 21:30:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 21:30:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:30:40 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 21:30:40 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 21:30:40 LOG5 end_task: Level: (4) ID = <10181> Status = 0 0 0 0 ok 2010-Apr-30 21:30:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 21:30:40 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 21:30:40 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 21:30:40 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 21:30:40 LOG5 begin_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2010-Apr-30 21:30:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:30:41 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 21:30:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 21:30:41 LOG5 end_task: Level: (4) ID = <10182> Status = 0 0 0 0 ok 2010-Apr-30 21:30:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 21:30:41 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 21:30:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 21:30:41 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 21:30:41 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 21:30:41 LOG5 begin_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2010-Apr-30 21:30:41 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 21:30:41 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 21:30:41 LOG5 end_task: Level: (4) ID = <10183> Status = 0 0 0 0 ok 2010-Apr-30 21:30:41 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 21:30:41 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 21:30:41 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 21:30:41 LOG5 end_task: Level: (3) ID = <10180> Status = 0 0 0 0 ok 2010-Apr-30 21:30:41 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 21:30:41 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 21:30:41 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 21:30:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 21:30:41 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Apr-30 21:30:41 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 21:30:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 21:30:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 21:30:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 21:30:41 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2010-Apr-30 21:30:41 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 21:30:41 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 21:30:41 LOG5 begin_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2010-Apr-30 21:30:41 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 21:30:41 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 21:30:41 INFO2 take_data: Starting WAPP 1-second scan: 12000071 2010-Apr-30 21:30:41 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 21:30:41 LOG5 begin_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2010-Apr-30 21:30:41 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 21:30:41 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 21:30:41 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5442.00 2010-Apr-30 21:30:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 21:30:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:30:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:30:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:30:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:30:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:30:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:30:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:30:43 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:30:43 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 21:30:43 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 21:30:43 LOG5 end_task: Level: (4) ID = <10186> Status = 0 0 0 0 ok 2010-Apr-30 21:30:43 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 21:30:43 LOG5 end_task: Level: (3) ID = <10185> Status = 0 0 0 0 ok 2010-Apr-30 21:30:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 21:30:43 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 21:30:43 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 21:30:43 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 21:30:43 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2010-Apr-30 21:30:43 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 21:30:43 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 21:30:43 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 21:30:43 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 21:30:43 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2010-Apr-30 21:30:43 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 21:30:43 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 21:30:43 LOG5 finish_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2010-Apr-30 21:30:43 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 21:30:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 21:30:43 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 21:30:43 LOG5 end_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2010-Apr-30 21:30:43 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 15 of 99 2010-Apr-30 21:30:43 LOG4 send_obs_status: To obs_status: <1> LOOP 15 2010-Apr-30 21:30:43 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:30:43 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:30:43 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:30:44 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:30:44 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 21:30:44 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 21:30:44 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 21:30:44 LOG5 begin_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2010-Apr-30 21:30:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 21:30:44 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 21:30:44 INFO2 take_data: Starting WAPP 600-second scan: 12000072 2010-Apr-30 21:30:44 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 21:30:44 LOG5 begin_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-Apr-30 21:30:44 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 21:30:44 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 21:30:44 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 21:30:44 INFO1 WAPP=1+2+3+4-start_spectra: start sec 5445.00 2010-Apr-30 21:30:44 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0014.fits 2010-Apr-30 21:30:44 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0014.fits} 2010-Apr-30 21:30:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 21:30:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:30:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:30:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:30:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:30:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:30:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:30:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:30:46 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:40:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 21:40:45 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 21:40:45 LOG5 end_task: Level: (3) ID = <10189> Status = 0 0 0 0 ok 2010-Apr-30 21:40:45 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 21:40:45 LOG5 end_task: Level: (2) ID = <10188> Status = 0 0 0 0 ok 2010-Apr-30 21:40:45 LOG1 fixed_driftmap: New position: year = 2010.3310151912692 RA = 11:48:43.3 RA/Dec = 11:49:17.4 +27:59:07.3 2010-Apr-30 21:40:45 NOTE fixed_driftmap: Correcting ZA to 9:37:53.6 ... 2010-Apr-30 21:40:45 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6315443835 -CF 2010-Apr-30 21:40:45 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 21:40:45 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 21:40:45 LOG5 begin_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2010-Apr-30 21:40:45 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 21:40:45 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 21:40:45 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2010-Apr-30 21:40:45 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 21:40:45 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 21:40:45 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 21:40:45 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 21:40:45 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2010-Apr-30 21:40:45 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6315443835 -CF 2010-Apr-30 21:40:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:40:45 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 21:40:45 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 21:40:45 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:40:45 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 21:40:45 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 21:40:45 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2010-Apr-30 21:40:45 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 21:40:45 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 21:40:45 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 21:40:45 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 21:40:45 LOG5 begin_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2010-Apr-30 21:40:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:40:46 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 21:40:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 21:40:46 LOG5 end_task: Level: (4) ID = <10193> Status = 0 0 0 0 ok 2010-Apr-30 21:40:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 21:40:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 21:40:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 21:40:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 21:40:46 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 21:40:46 LOG5 begin_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2010-Apr-30 21:40:46 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 21:40:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 21:40:46 LOG5 end_task: Level: (4) ID = <10194> Status = 0 0 0 0 ok 2010-Apr-30 21:40:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 21:40:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 21:40:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 21:40:46 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2010-Apr-30 21:40:46 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 21:40:46 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 21:40:46 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 21:40:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 21:40:46 LOG5 begin_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Apr-30 21:40:46 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 21:40:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 21:40:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 21:40:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 21:40:46 LOG5 end_task: Level: (3) ID = <10195> Status = 0 0 0 0 ok 2010-Apr-30 21:40:46 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 21:40:46 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 21:40:46 LOG5 begin_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2010-Apr-30 21:40:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 21:40:46 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 21:40:46 INFO2 take_data: Starting WAPP 1-second scan: 12000073 2010-Apr-30 21:40:46 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 21:40:46 LOG5 begin_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2010-Apr-30 21:40:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 21:40:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 21:40:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6047.00 2010-Apr-30 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:40:48 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 21:40:48 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 21:40:48 LOG5 end_task: Level: (4) ID = <10197> Status = 0 0 0 0 ok 2010-Apr-30 21:40:48 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 21:40:48 LOG5 end_task: Level: (3) ID = <10196> Status = 0 0 0 0 ok 2010-Apr-30 21:40:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 21:40:48 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 21:40:48 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 21:40:48 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 21:40:48 LOG5 begin_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2010-Apr-30 21:40:48 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 21:40:48 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 21:40:48 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 21:40:48 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 21:40:48 LOG5 end_task: Level: (3) ID = <10198> Status = 0 0 0 0 ok 2010-Apr-30 21:40:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 21:40:48 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 21:40:48 LOG5 finish_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2010-Apr-30 21:40:48 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 21:40:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 21:40:48 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 21:40:48 LOG5 end_task: Level: (2) ID = <10190> Status = 0 0 0 0 ok 2010-Apr-30 21:40:48 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 16 of 99 2010-Apr-30 21:40:48 LOG4 send_obs_status: To obs_status: <1> LOOP 16 2010-Apr-30 21:40:48 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:40:48 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:40:49 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:40:49 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:40:49 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 21:40:49 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 21:40:49 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 21:40:49 LOG5 begin_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2010-Apr-30 21:40:49 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 21:40:49 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 21:40:49 INFO2 take_data: Starting WAPP 600-second scan: 12000074 2010-Apr-30 21:40:49 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 21:40:49 LOG5 begin_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2010-Apr-30 21:40:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 21:40:49 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 21:40:49 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 21:40:49 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6050.00 2010-Apr-30 21:40:49 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0015.fits 2010-Apr-30 21:40:49 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0015.fits} 2010-Apr-30 21:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 21:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:40:51 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:50:50 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 21:50:50 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 21:50:50 LOG5 end_task: Level: (3) ID = <10200> Status = 0 0 0 0 ok 2010-Apr-30 21:50:50 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 21:50:50 LOG5 end_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2010-Apr-30 21:50:50 LOG1 fixed_driftmap: New position: year = 2010.3310343625624 RA = 11:58:50.2 RA/Dec = 11:59:24.1 +27:59:06.6 2010-Apr-30 21:50:50 NOTE fixed_driftmap: Correcting ZA to 9:37:52.9 ... 2010-Apr-30 21:50:50 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6313669679 -CF 2010-Apr-30 21:50:50 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 21:50:50 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 21:50:50 LOG5 begin_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2010-Apr-30 21:50:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 21:50:50 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 21:50:50 LOG5 begin_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2010-Apr-30 21:50:50 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 21:50:50 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 21:50:50 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 21:50:50 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 21:50:50 LOG5 begin_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2010-Apr-30 21:50:50 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6313669679 -CF 2010-Apr-30 21:50:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:50:50 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 21:50:50 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 21:50:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:50:50 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 21:50:50 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 21:50:50 LOG5 end_task: Level: (4) ID = <10203> Status = 0 0 0 0 ok 2010-Apr-30 21:50:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 21:50:50 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 21:50:50 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 21:50:50 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 21:50:50 LOG5 begin_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2010-Apr-30 21:50:50 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 21:50:51 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 21:50:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 21:50:51 LOG5 end_task: Level: (4) ID = <10204> Status = 0 0 0 0 ok 2010-Apr-30 21:50:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 21:50:51 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 21:50:51 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 21:50:51 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 21:50:51 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 21:50:51 LOG5 begin_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2010-Apr-30 21:50:51 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 21:50:51 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 21:50:51 LOG5 end_task: Level: (4) ID = <10205> Status = 0 0 0 0 ok 2010-Apr-30 21:50:51 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 21:50:51 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 21:50:51 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 21:50:51 LOG5 end_task: Level: (3) ID = <10202> Status = 0 0 0 0 ok 2010-Apr-30 21:50:51 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 21:50:51 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 21:50:51 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 21:50:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 21:50:51 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Apr-30 21:50:51 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 21:50:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 21:50:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 21:50:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 21:50:51 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2010-Apr-30 21:50:51 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 21:50:51 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 21:50:51 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2010-Apr-30 21:50:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 21:50:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 21:50:51 INFO2 take_data: Starting WAPP 1-second scan: 12000075 2010-Apr-30 21:50:51 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 21:50:51 LOG5 begin_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2010-Apr-30 21:50:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 21:50:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 21:50:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6652.00 2010-Apr-30 21:50:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 21:50:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:50:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:50:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:50:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:50:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:50:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:50:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:50:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:50:53 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 21:50:53 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 21:50:53 LOG5 end_task: Level: (4) ID = <10208> Status = 0 0 0 0 ok 2010-Apr-30 21:50:53 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 21:50:53 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2010-Apr-30 21:50:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 21:50:53 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 21:50:53 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 21:50:53 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 21:50:53 LOG5 begin_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2010-Apr-30 21:50:53 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 21:50:53 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 21:50:53 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 21:50:53 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 21:50:53 LOG5 end_task: Level: (3) ID = <10209> Status = 0 0 0 0 ok 2010-Apr-30 21:50:53 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 21:50:53 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 21:50:53 LOG5 finish_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2010-Apr-30 21:50:53 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 21:50:53 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 21:50:53 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 21:50:53 LOG5 end_task: Level: (2) ID = <10201> Status = 0 0 0 0 ok 2010-Apr-30 21:50:53 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 17 of 99 2010-Apr-30 21:50:53 LOG4 send_obs_status: To obs_status: <1> LOOP 17 2010-Apr-30 21:50:53 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:50:53 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:50:53 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:50:54 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 21:50:54 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 21:50:54 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 21:50:54 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 21:50:54 LOG5 begin_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2010-Apr-30 21:50:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 21:50:54 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 21:50:54 INFO2 take_data: Starting WAPP 600-second scan: 12000076 2010-Apr-30 21:50:54 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 21:50:54 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2010-Apr-30 21:50:54 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 21:50:54 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 21:50:54 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 21:50:54 INFO1 WAPP=1+2+3+4-start_spectra: start sec 6655.00 2010-Apr-30 21:50:54 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0016.fits 2010-Apr-30 21:50:54 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0016.fits} 2010-Apr-30 21:50:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 21:50:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:50:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:50:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:50:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:50:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:50:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:50:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 21:50:56 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:00:55 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 22:00:55 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 22:00:55 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2010-Apr-30 22:00:55 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 22:00:55 LOG5 end_task: Level: (2) ID = <10210> Status = 0 0 0 0 ok 2010-Apr-30 22:00:55 LOG1 fixed_driftmap: New position: year = 2010.3310535338555 RA = 12:08:57.2 RA/Dec = 12:09:30.8 +27:59:06.4 2010-Apr-30 22:00:55 NOTE fixed_driftmap: Correcting ZA to 9:37:52.7 ... 2010-Apr-30 22:00:55 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6313014971 -CF 2010-Apr-30 22:00:55 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 22:00:55 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 22:00:55 LOG5 begin_task: Level: (2) ID = <10212> Status = 0 0 0 0 ok 2010-Apr-30 22:00:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 22:00:55 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 22:00:55 LOG5 begin_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2010-Apr-30 22:00:55 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 22:00:55 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 22:00:55 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 22:00:55 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 22:00:55 LOG5 begin_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2010-Apr-30 22:00:55 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6313014971 -CF 2010-Apr-30 22:00:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:00:55 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 22:00:55 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 22:00:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:00:55 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 22:00:55 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 22:00:55 LOG5 end_task: Level: (4) ID = <10214> Status = 0 0 0 0 ok 2010-Apr-30 22:00:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 22:00:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 22:00:55 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 22:00:55 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 22:00:55 LOG5 begin_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2010-Apr-30 22:00:55 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:00:56 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 22:00:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 22:00:56 LOG5 end_task: Level: (4) ID = <10215> Status = 0 0 0 0 ok 2010-Apr-30 22:00:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 22:00:56 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 22:00:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 22:00:56 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 22:00:56 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 22:00:56 LOG5 begin_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2010-Apr-30 22:00:56 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 22:00:56 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 22:00:56 LOG5 end_task: Level: (4) ID = <10216> Status = 0 0 0 0 ok 2010-Apr-30 22:00:56 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 22:00:56 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 22:00:56 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 22:00:56 LOG5 end_task: Level: (3) ID = <10213> Status = 0 0 0 0 ok 2010-Apr-30 22:00:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 22:00:56 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 22:00:56 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 22:00:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 22:00:56 LOG5 begin_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-Apr-30 22:00:56 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 22:00:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 22:00:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 22:00:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 22:00:56 LOG5 end_task: Level: (3) ID = <10217> Status = 0 0 0 0 ok 2010-Apr-30 22:00:56 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 22:00:56 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 22:00:56 LOG5 begin_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2010-Apr-30 22:00:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 22:00:56 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 22:00:56 INFO2 take_data: Starting WAPP 1-second scan: 12000077 2010-Apr-30 22:00:56 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 22:00:56 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2010-Apr-30 22:00:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 22:00:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 22:00:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7257.00 2010-Apr-30 22:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 22:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:00:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:00:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 22:00:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 22:00:58 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2010-Apr-30 22:00:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 22:00:58 LOG5 end_task: Level: (3) ID = <10218> Status = 0 0 0 0 ok 2010-Apr-30 22:00:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 22:00:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 22:00:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 22:00:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 22:00:58 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2010-Apr-30 22:00:58 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 22:00:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 22:00:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 22:00:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 22:00:58 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2010-Apr-30 22:00:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 22:00:58 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 22:00:58 LOG5 finish_task: Level: (2) ID = <10212> Status = 0 0 0 0 ok 2010-Apr-30 22:00:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 22:00:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 22:00:58 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 22:00:58 LOG5 end_task: Level: (2) ID = <10212> Status = 0 0 0 0 ok 2010-Apr-30 22:00:58 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 18 of 99 2010-Apr-30 22:00:58 LOG4 send_obs_status: To obs_status: <1> LOOP 18 2010-Apr-30 22:00:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:00:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:00:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:00:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:00:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 22:00:59 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 22:00:59 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 22:00:59 LOG5 begin_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2010-Apr-30 22:00:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 22:00:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 22:00:59 INFO2 take_data: Starting WAPP 600-second scan: 12000078 2010-Apr-30 22:00:59 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 22:00:59 LOG5 begin_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2010-Apr-30 22:00:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 22:00:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 22:00:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 22:00:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7260.00 2010-Apr-30 22:00:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0017.fits 2010-Apr-30 22:00:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0017.fits} 2010-Apr-30 22:01:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 22:01:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:01:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:01:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:01:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:01:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:01:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:01:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:01:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:11:00 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 22:11:00 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 22:11:00 LOG5 end_task: Level: (3) ID = <10222> Status = 0 0 0 0 ok 2010-Apr-30 22:11:00 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 22:11:00 LOG5 end_task: Level: (2) ID = <10221> Status = 0 0 0 0 ok 2010-Apr-30 22:11:00 LOG1 fixed_driftmap: New position: year = 2010.3310727051487 RA = 12:19:04.1 RA/Dec = 12:19:37.4 +27:59:06.6 2010-Apr-30 22:11:00 NOTE fixed_driftmap: Correcting ZA to 9:37:52.9 ... 2010-Apr-30 22:11:00 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6313480982 -CF 2010-Apr-30 22:11:00 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 22:11:00 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 22:11:00 LOG5 begin_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2010-Apr-30 22:11:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 22:11:00 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 22:11:00 LOG5 begin_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2010-Apr-30 22:11:00 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 22:11:00 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 22:11:00 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 22:11:00 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 22:11:00 LOG5 begin_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2010-Apr-30 22:11:00 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6313480982 -CF 2010-Apr-30 22:11:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:11:00 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 22:11:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 22:11:00 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:11:00 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 22:11:00 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 22:11:00 LOG5 end_task: Level: (4) ID = <10225> Status = 0 0 0 0 ok 2010-Apr-30 22:11:00 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 22:11:00 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 22:11:00 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 22:11:00 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 22:11:00 LOG5 begin_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2010-Apr-30 22:11:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:11:01 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 22:11:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 22:11:01 LOG5 end_task: Level: (4) ID = <10226> Status = 0 0 0 0 ok 2010-Apr-30 22:11:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 22:11:01 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 22:11:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 22:11:01 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 22:11:01 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 22:11:01 LOG5 begin_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2010-Apr-30 22:11:01 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 22:11:01 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 22:11:01 LOG5 end_task: Level: (4) ID = <10227> Status = 0 0 0 0 ok 2010-Apr-30 22:11:01 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 22:11:01 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 22:11:01 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 22:11:01 LOG5 end_task: Level: (3) ID = <10224> Status = 0 0 0 0 ok 2010-Apr-30 22:11:01 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 22:11:01 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 22:11:01 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 22:11:01 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 22:11:01 LOG5 begin_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Apr-30 22:11:01 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 22:11:01 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 22:11:01 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 22:11:01 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 22:11:01 LOG5 end_task: Level: (3) ID = <10228> Status = 0 0 0 0 ok 2010-Apr-30 22:11:01 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 22:11:01 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 22:11:01 LOG5 begin_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2010-Apr-30 22:11:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 22:11:01 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 22:11:01 INFO2 take_data: Starting WAPP 1-second scan: 12000079 2010-Apr-30 22:11:01 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 22:11:01 LOG5 begin_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2010-Apr-30 22:11:01 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 22:11:01 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 22:11:01 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7862.00 2010-Apr-30 22:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 22:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:11:03 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:11:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 22:11:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 22:11:03 LOG5 end_task: Level: (4) ID = <10230> Status = 0 0 0 0 ok 2010-Apr-30 22:11:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 22:11:03 LOG5 end_task: Level: (3) ID = <10229> Status = 0 0 0 0 ok 2010-Apr-30 22:11:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 22:11:03 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 22:11:03 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 22:11:03 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 22:11:03 LOG5 begin_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2010-Apr-30 22:11:03 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 22:11:03 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 22:11:03 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 22:11:03 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 22:11:03 LOG5 end_task: Level: (3) ID = <10231> Status = 0 0 0 0 ok 2010-Apr-30 22:11:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 22:11:03 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 22:11:03 LOG5 finish_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2010-Apr-30 22:11:03 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 22:11:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 22:11:03 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 22:11:03 LOG5 end_task: Level: (2) ID = <10223> Status = 0 0 0 0 ok 2010-Apr-30 22:11:03 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 19 of 99 2010-Apr-30 22:11:03 LOG4 send_obs_status: To obs_status: <1> LOOP 19 2010-Apr-30 22:11:03 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:11:04 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:11:04 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:11:04 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:11:04 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 22:11:04 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 22:11:04 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 22:11:04 LOG5 begin_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2010-Apr-30 22:11:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 22:11:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 22:11:04 INFO2 take_data: Starting WAPP 600-second scan: 12000080 2010-Apr-30 22:11:04 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 22:11:04 LOG5 begin_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2010-Apr-30 22:11:04 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 22:11:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 22:11:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 22:11:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 7865.00 2010-Apr-30 22:11:04 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0018.fits 2010-Apr-30 22:11:04 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0018.fits} 2010-Apr-30 22:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 22:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:11:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:21:05 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 22:21:05 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 22:21:05 LOG5 end_task: Level: (3) ID = <10233> Status = 0 0 0 0 ok 2010-Apr-30 22:21:05 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 22:21:05 LOG5 end_task: Level: (2) ID = <10232> Status = 0 0 0 0 ok 2010-Apr-30 22:21:05 LOG1 fixed_driftmap: New position: year = 2010.3310918764416 RA = 12:29:11.1 RA/Dec = 12:29:44.1 +27:59:07.1 2010-Apr-30 22:21:05 NOTE fixed_driftmap: Correcting ZA to 9:37:53.4 ... 2010-Apr-30 22:21:05 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6315066804 -CF 2010-Apr-30 22:21:05 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 22:21:05 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 22:21:05 LOG5 begin_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2010-Apr-30 22:21:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 22:21:05 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 22:21:05 LOG5 begin_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2010-Apr-30 22:21:05 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 22:21:05 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 22:21:05 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 22:21:05 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 22:21:05 LOG5 begin_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2010-Apr-30 22:21:05 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6315066804 -CF 2010-Apr-30 22:21:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:21:05 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 22:21:05 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 22:21:05 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:21:05 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 22:21:05 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 22:21:05 LOG5 end_task: Level: (4) ID = <10236> Status = 0 0 0 0 ok 2010-Apr-30 22:21:05 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 22:21:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 22:21:05 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 22:21:05 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 22:21:05 LOG5 begin_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2010-Apr-30 22:21:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:21:06 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 22:21:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 22:21:06 LOG5 end_task: Level: (4) ID = <10237> Status = 0 0 0 0 ok 2010-Apr-30 22:21:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 22:21:06 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 22:21:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 22:21:06 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 22:21:06 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 22:21:06 LOG5 begin_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2010-Apr-30 22:21:06 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 22:21:06 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 22:21:06 LOG5 end_task: Level: (4) ID = <10238> Status = 0 0 0 0 ok 2010-Apr-30 22:21:06 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 22:21:06 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 22:21:06 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 22:21:06 LOG5 end_task: Level: (3) ID = <10235> Status = 0 0 0 0 ok 2010-Apr-30 22:21:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 22:21:06 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 22:21:06 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 22:21:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 22:21:06 LOG5 begin_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Apr-30 22:21:06 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 22:21:06 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 22:21:06 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 22:21:06 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 22:21:06 LOG5 end_task: Level: (3) ID = <10239> Status = 0 0 0 0 ok 2010-Apr-30 22:21:06 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 22:21:06 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 22:21:06 LOG5 begin_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2010-Apr-30 22:21:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 22:21:06 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 22:21:06 INFO2 take_data: Starting WAPP 1-second scan: 12000081 2010-Apr-30 22:21:06 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 22:21:06 LOG5 begin_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2010-Apr-30 22:21:06 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 22:21:06 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8467.00 2010-Apr-30 22:21:06 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:21:08 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:21:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 22:21:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 22:21:08 LOG5 end_task: Level: (4) ID = <10241> Status = 0 0 0 0 ok 2010-Apr-30 22:21:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 22:21:08 LOG5 end_task: Level: (3) ID = <10240> Status = 0 0 0 0 ok 2010-Apr-30 22:21:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 22:21:08 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 22:21:08 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 22:21:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 22:21:08 LOG5 begin_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2010-Apr-30 22:21:08 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 22:21:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 22:21:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 22:21:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 22:21:08 LOG5 end_task: Level: (3) ID = <10242> Status = 0 0 0 0 ok 2010-Apr-30 22:21:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 22:21:08 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 22:21:08 LOG5 finish_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2010-Apr-30 22:21:08 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 22:21:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 22:21:08 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 22:21:08 LOG5 end_task: Level: (2) ID = <10234> Status = 0 0 0 0 ok 2010-Apr-30 22:21:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 20 of 99 2010-Apr-30 22:21:08 LOG4 send_obs_status: To obs_status: <1> LOOP 20 2010-Apr-30 22:21:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:21:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:21:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:21:09 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:21:09 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 22:21:09 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 22:21:09 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 22:21:09 LOG5 begin_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2010-Apr-30 22:21:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 22:21:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 22:21:09 INFO2 take_data: Starting WAPP 600-second scan: 12000082 2010-Apr-30 22:21:09 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 22:21:09 LOG5 begin_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2010-Apr-30 22:21:09 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 22:21:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 22:21:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 22:21:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 8470.00 2010-Apr-30 22:21:09 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0019.fits 2010-Apr-30 22:21:09 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0019.fits} 2010-Apr-30 22:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 22:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:28:44 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 22:28:44.296 (seconds: 80924.296)!} 2010-Apr-30 22:28:44 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 22:28:44.296 (seconds: 80924.296)! 2010-Apr-30 22:28:45 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 80923.0 to 80924.0! 2010-Apr-30 22:28:46 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (80923.0 - 80925.0)! 2010-Apr-30 22:31:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 22:31:10 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 22:31:10 LOG5 end_task: Level: (3) ID = <10244> Status = 0 0 0 0 ok 2010-Apr-30 22:31:10 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 22:31:10 LOG5 end_task: Level: (2) ID = <10243> Status = 0 0 0 0 ok 2010-Apr-30 22:31:10 LOG1 fixed_driftmap: New position: year = 2010.3311110477348 RA = 12:39:18.0 RA/Dec = 12:39:50.7 +27:59:08.1 2010-Apr-30 22:31:10 NOTE fixed_driftmap: Correcting ZA to 9:37:54.4 ... 2010-Apr-30 22:31:10 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6317769341 -CF 2010-Apr-30 22:31:10 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 22:31:10 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 22:31:10 LOG5 begin_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2010-Apr-30 22:31:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 22:31:10 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 22:31:10 LOG5 begin_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2010-Apr-30 22:31:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 22:31:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 22:31:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 22:31:10 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 22:31:10 LOG5 begin_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2010-Apr-30 22:31:10 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6317769341 -CF 2010-Apr-30 22:31:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:31:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 22:31:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 22:31:10 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:31:10 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 22:31:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 22:31:10 LOG5 end_task: Level: (4) ID = <10247> Status = 0 0 0 0 ok 2010-Apr-30 22:31:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 22:31:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 22:31:10 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 22:31:10 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 22:31:10 LOG5 begin_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2010-Apr-30 22:31:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:31:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 22:31:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 22:31:11 LOG5 end_task: Level: (4) ID = <10248> Status = 0 0 0 0 ok 2010-Apr-30 22:31:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 22:31:11 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 22:31:11 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 22:31:11 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 22:31:11 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 22:31:11 LOG5 begin_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2010-Apr-30 22:31:11 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 22:31:11 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 22:31:11 LOG5 end_task: Level: (4) ID = <10249> Status = 0 0 0 0 ok 2010-Apr-30 22:31:11 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 22:31:11 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 22:31:11 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 22:31:11 LOG5 end_task: Level: (3) ID = <10246> Status = 0 0 0 0 ok 2010-Apr-30 22:31:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 22:31:11 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 22:31:11 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 22:31:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 22:31:11 LOG5 begin_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2010-Apr-30 22:31:11 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 22:31:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 22:31:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 22:31:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 22:31:11 LOG5 end_task: Level: (3) ID = <10250> Status = 0 0 0 0 ok 2010-Apr-30 22:31:11 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 22:31:11 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 22:31:11 LOG5 begin_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2010-Apr-30 22:31:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 22:31:11 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 22:31:11 INFO2 take_data: Starting WAPP 1-second scan: 12000083 2010-Apr-30 22:31:11 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 22:31:11 LOG5 begin_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2010-Apr-30 22:31:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 22:31:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 22:31:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9072.00 2010-Apr-30 22:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 22:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:31:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:31:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 22:31:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 22:31:13 LOG5 end_task: Level: (4) ID = <10252> Status = 0 0 0 0 ok 2010-Apr-30 22:31:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 22:31:13 LOG5 end_task: Level: (3) ID = <10251> Status = 0 0 0 0 ok 2010-Apr-30 22:31:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 22:31:13 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 22:31:13 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 22:31:13 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 22:31:13 LOG5 begin_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2010-Apr-30 22:31:13 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 22:31:13 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 22:31:13 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 22:31:13 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 22:31:13 LOG5 end_task: Level: (3) ID = <10253> Status = 0 0 0 0 ok 2010-Apr-30 22:31:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 22:31:13 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 22:31:13 LOG5 finish_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2010-Apr-30 22:31:13 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 22:31:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 22:31:13 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 22:31:13 LOG5 end_task: Level: (2) ID = <10245> Status = 0 0 0 0 ok 2010-Apr-30 22:31:13 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 21 of 99 2010-Apr-30 22:31:13 LOG4 send_obs_status: To obs_status: <1> LOOP 21 2010-Apr-30 22:31:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:31:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:31:14 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:31:14 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:31:14 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 22:31:14 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 22:31:14 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 22:31:14 LOG5 begin_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2010-Apr-30 22:31:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 22:31:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 22:31:14 INFO2 take_data: Starting WAPP 600-second scan: 12000084 2010-Apr-30 22:31:14 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 22:31:14 LOG5 begin_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2010-Apr-30 22:31:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 22:31:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 22:31:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 22:31:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9075.00 2010-Apr-30 22:31:14 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0020.fits 2010-Apr-30 22:31:14 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0020.fits} 2010-Apr-30 22:31:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 22:31:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:31:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:31:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:31:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:31:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:31:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:31:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:31:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:41:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 22:41:15 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 22:41:15 LOG5 end_task: Level: (3) ID = <10255> Status = 0 0 0 0 ok 2010-Apr-30 22:41:15 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 22:41:15 LOG5 end_task: Level: (2) ID = <10254> Status = 0 0 0 0 ok 2010-Apr-30 22:41:15 LOG1 fixed_driftmap: New position: year = 2010.331130219028 RA = 12:49:25.0 RA/Dec = 12:49:57.4 +27:59:09.5 2010-Apr-30 22:41:15 NOTE fixed_driftmap: Correcting ZA to 9:37:55.8 ... 2010-Apr-30 22:41:15 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6321583326 -CF 2010-Apr-30 22:41:15 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 22:41:15 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 22:41:15 LOG5 begin_task: Level: (2) ID = <10256> Status = 0 0 0 0 ok 2010-Apr-30 22:41:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 22:41:15 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 22:41:15 LOG5 begin_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2010-Apr-30 22:41:15 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 22:41:15 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 22:41:15 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 22:41:15 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 22:41:15 LOG5 begin_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2010-Apr-30 22:41:15 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6321583326 -CF 2010-Apr-30 22:41:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:41:15 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 22:41:15 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 22:41:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:41:15 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 22:41:15 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 22:41:15 LOG5 end_task: Level: (4) ID = <10258> Status = 0 0 0 0 ok 2010-Apr-30 22:41:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 22:41:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 22:41:15 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 22:41:15 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 22:41:15 LOG5 begin_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2010-Apr-30 22:41:15 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:41:16 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 22:41:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 22:41:16 LOG5 end_task: Level: (4) ID = <10259> Status = 0 0 0 0 ok 2010-Apr-30 22:41:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 22:41:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 22:41:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 22:41:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 22:41:16 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 22:41:16 LOG5 begin_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2010-Apr-30 22:41:16 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 22:41:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 22:41:16 LOG5 end_task: Level: (4) ID = <10260> Status = 0 0 0 0 ok 2010-Apr-30 22:41:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 22:41:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 22:41:16 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 22:41:16 LOG5 end_task: Level: (3) ID = <10257> Status = 0 0 0 0 ok 2010-Apr-30 22:41:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 22:41:16 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 22:41:16 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 22:41:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 22:41:16 LOG5 begin_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2010-Apr-30 22:41:16 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 22:41:16 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 22:41:16 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 22:41:16 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 22:41:16 LOG5 end_task: Level: (3) ID = <10261> Status = 0 0 0 0 ok 2010-Apr-30 22:41:16 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 22:41:16 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 22:41:16 LOG5 begin_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2010-Apr-30 22:41:16 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 22:41:16 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 22:41:16 INFO2 take_data: Starting WAPP 1-second scan: 12000085 2010-Apr-30 22:41:16 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 22:41:16 LOG5 begin_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2010-Apr-30 22:41:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 22:41:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 22:41:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9677.00 2010-Apr-30 22:41:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 22:41:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:41:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:41:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:41:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:41:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:41:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:41:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:41:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:41:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 22:41:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 22:41:18 LOG5 end_task: Level: (4) ID = <10263> Status = 0 0 0 0 ok 2010-Apr-30 22:41:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 22:41:18 LOG5 end_task: Level: (3) ID = <10262> Status = 0 0 0 0 ok 2010-Apr-30 22:41:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 22:41:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 22:41:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 22:41:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 22:41:18 LOG5 begin_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2010-Apr-30 22:41:18 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 22:41:18 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 22:41:18 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 22:41:18 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 22:41:18 LOG5 end_task: Level: (3) ID = <10264> Status = 0 0 0 0 ok 2010-Apr-30 22:41:18 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 22:41:18 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 22:41:18 LOG5 finish_task: Level: (2) ID = <10256> Status = 0 0 0 0 ok 2010-Apr-30 22:41:18 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 22:41:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 22:41:18 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 22:41:18 LOG5 end_task: Level: (2) ID = <10256> Status = 0 0 0 0 ok 2010-Apr-30 22:41:18 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 22 of 99 2010-Apr-30 22:41:18 LOG4 send_obs_status: To obs_status: <1> LOOP 22 2010-Apr-30 22:41:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:41:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:41:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:41:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:41:19 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 22:41:19 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 22:41:19 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 22:41:19 LOG5 begin_task: Level: (2) ID = <10265> Status = 0 0 0 0 ok 2010-Apr-30 22:41:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 22:41:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 22:41:19 INFO2 take_data: Starting WAPP 600-second scan: 12000086 2010-Apr-30 22:41:19 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 22:41:19 LOG5 begin_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2010-Apr-30 22:41:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 22:41:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 22:41:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 22:41:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 9680.00 2010-Apr-30 22:41:19 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0021.fits 2010-Apr-30 22:41:19 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0021.fits} 2010-Apr-30 22:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 22:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:41:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:51:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 22:51:20 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 22:51:20 LOG5 end_task: Level: (3) ID = <10266> Status = 0 0 0 0 ok 2010-Apr-30 22:51:20 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 22:51:20 LOG5 end_task: Level: (2) ID = <10265> Status = 0 0 0 0 ok 2010-Apr-30 22:51:20 LOG1 fixed_driftmap: New position: year = 2010.3311493903211 RA = 12:59:31.9 RA/Dec = 13:00:04.0 +27:59:11.2 2010-Apr-30 22:51:20 NOTE fixed_driftmap: Correcting ZA to 9:37:57.5 ... 2010-Apr-30 22:51:20 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6326501328 -CF 2010-Apr-30 22:51:20 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 22:51:20 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 22:51:20 LOG5 begin_task: Level: (2) ID = <10267> Status = 0 0 0 0 ok 2010-Apr-30 22:51:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 22:51:20 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 22:51:20 LOG5 begin_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2010-Apr-30 22:51:20 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 22:51:20 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 22:51:20 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 22:51:20 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 22:51:20 LOG5 begin_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2010-Apr-30 22:51:20 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6326501328 -CF 2010-Apr-30 22:51:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:51:20 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 22:51:20 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 22:51:20 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:51:20 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 22:51:20 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 22:51:20 LOG5 end_task: Level: (4) ID = <10269> Status = 0 0 0 0 ok 2010-Apr-30 22:51:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 22:51:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 22:51:20 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 22:51:20 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 22:51:20 LOG5 begin_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2010-Apr-30 22:51:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 22:51:21 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 22:51:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 22:51:21 LOG5 end_task: Level: (4) ID = <10270> Status = 0 0 0 0 ok 2010-Apr-30 22:51:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 22:51:21 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 22:51:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 22:51:21 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 22:51:21 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 22:51:21 LOG5 begin_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2010-Apr-30 22:51:21 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 22:51:21 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 22:51:21 LOG5 end_task: Level: (4) ID = <10271> Status = 0 0 0 0 ok 2010-Apr-30 22:51:21 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 22:51:21 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 22:51:21 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 22:51:21 LOG5 end_task: Level: (3) ID = <10268> Status = 0 0 0 0 ok 2010-Apr-30 22:51:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 22:51:21 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 22:51:21 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 22:51:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 22:51:21 LOG5 begin_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2010-Apr-30 22:51:21 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 22:51:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 22:51:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 22:51:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 22:51:21 LOG5 end_task: Level: (3) ID = <10272> Status = 0 0 0 0 ok 2010-Apr-30 22:51:21 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 22:51:21 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 22:51:21 LOG5 begin_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2010-Apr-30 22:51:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 22:51:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 22:51:21 INFO2 take_data: Starting WAPP 1-second scan: 12000087 2010-Apr-30 22:51:21 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 22:51:21 LOG5 begin_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2010-Apr-30 22:51:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 22:51:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 22:51:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10282.00 2010-Apr-30 22:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 22:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:51:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:51:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 22:51:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 22:51:23 LOG5 end_task: Level: (4) ID = <10274> Status = 0 0 0 0 ok 2010-Apr-30 22:51:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 22:51:23 LOG5 end_task: Level: (3) ID = <10273> Status = 0 0 0 0 ok 2010-Apr-30 22:51:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 22:51:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 22:51:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 22:51:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 22:51:23 LOG5 begin_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2010-Apr-30 22:51:23 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 22:51:23 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 22:51:23 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 22:51:23 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 22:51:23 LOG5 end_task: Level: (3) ID = <10275> Status = 0 0 0 0 ok 2010-Apr-30 22:51:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 22:51:23 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 22:51:23 LOG5 finish_task: Level: (2) ID = <10267> Status = 0 0 0 0 ok 2010-Apr-30 22:51:23 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 22:51:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 22:51:23 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 22:51:23 LOG5 end_task: Level: (2) ID = <10267> Status = 0 0 0 0 ok 2010-Apr-30 22:51:23 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 23 of 99 2010-Apr-30 22:51:23 LOG4 send_obs_status: To obs_status: <1> LOOP 23 2010-Apr-30 22:51:23 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:51:23 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:51:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:51:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 22:51:24 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 22:51:24 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 22:51:24 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 22:51:24 LOG5 begin_task: Level: (2) ID = <10276> Status = 0 0 0 0 ok 2010-Apr-30 22:51:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 22:51:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 22:51:24 INFO2 take_data: Starting WAPP 600-second scan: 12000088 2010-Apr-30 22:51:24 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 22:51:24 LOG5 begin_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2010-Apr-30 22:51:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 22:51:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 22:51:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 22:51:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10285.00 2010-Apr-30 22:51:24 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0022.fits 2010-Apr-30 22:51:24 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0022.fits} 2010-Apr-30 22:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 22:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 22:58:42 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 22:58:42.300 (seconds: 82722.300)!} 2010-Apr-30 22:58:42 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 22:58:42.300 (seconds: 82722.300)! 2010-Apr-30 22:58:43 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 82721.0 to 82722.0! 2010-Apr-30 22:58:44 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (82721.0 - 82723.0)! 2010-Apr-30 23:01:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 23:01:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 23:01:25 LOG5 end_task: Level: (3) ID = <10277> Status = 0 0 0 0 ok 2010-Apr-30 23:01:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 23:01:25 LOG5 end_task: Level: (2) ID = <10276> Status = 0 0 0 0 ok 2010-Apr-30 23:01:25 LOG1 fixed_driftmap: New position: year = 2010.3311685616143 RA = 13:09:38.9 RA/Dec = 13:10:10.7 +27:59:13.4 2010-Apr-30 23:01:25 NOTE fixed_driftmap: Correcting ZA to 9:37:59.7 ... 2010-Apr-30 23:01:25 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6332513770 -CF 2010-Apr-30 23:01:25 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 23:01:25 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 23:01:25 LOG5 begin_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2010-Apr-30 23:01:25 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 23:01:25 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 23:01:25 LOG5 begin_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2010-Apr-30 23:01:25 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 23:01:25 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 23:01:25 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 23:01:25 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 23:01:25 LOG5 begin_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2010-Apr-30 23:01:25 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6332513770 -CF 2010-Apr-30 23:01:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:01:25 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 23:01:25 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 23:01:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:01:25 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 23:01:25 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 23:01:25 LOG5 end_task: Level: (4) ID = <10280> Status = 0 0 0 0 ok 2010-Apr-30 23:01:25 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 23:01:25 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 23:01:25 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 23:01:25 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 23:01:25 LOG5 begin_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2010-Apr-30 23:01:25 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:01:26 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 23:01:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 23:01:26 LOG5 end_task: Level: (4) ID = <10281> Status = 0 0 0 0 ok 2010-Apr-30 23:01:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 23:01:26 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 23:01:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 23:01:26 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 23:01:26 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 23:01:26 LOG5 begin_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2010-Apr-30 23:01:26 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 23:01:26 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 23:01:26 LOG5 end_task: Level: (4) ID = <10282> Status = 0 0 0 0 ok 2010-Apr-30 23:01:26 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 23:01:26 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 23:01:26 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 23:01:26 LOG5 end_task: Level: (3) ID = <10279> Status = 0 0 0 0 ok 2010-Apr-30 23:01:26 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 23:01:26 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 23:01:26 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 23:01:26 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 23:01:26 LOG5 begin_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Apr-30 23:01:26 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 23:01:26 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 23:01:26 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 23:01:26 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 23:01:26 LOG5 end_task: Level: (3) ID = <10283> Status = 0 0 0 0 ok 2010-Apr-30 23:01:26 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 23:01:26 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 23:01:26 LOG5 begin_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2010-Apr-30 23:01:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 23:01:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 23:01:26 INFO2 take_data: Starting WAPP 1-second scan: 12000089 2010-Apr-30 23:01:27 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 23:01:27 LOG5 begin_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2010-Apr-30 23:01:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 23:01:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 23:01:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10888.00 2010-Apr-30 23:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 23:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:01:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:01:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 23:01:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 23:01:29 LOG5 end_task: Level: (4) ID = <10285> Status = 0 0 0 0 ok 2010-Apr-30 23:01:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 23:01:29 LOG5 end_task: Level: (3) ID = <10284> Status = 0 0 0 0 ok 2010-Apr-30 23:01:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 23:01:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 23:01:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 23:01:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 23:01:29 LOG5 begin_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2010-Apr-30 23:01:29 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 23:01:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 23:01:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 23:01:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 23:01:29 LOG5 end_task: Level: (3) ID = <10286> Status = 0 0 0 0 ok 2010-Apr-30 23:01:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 23:01:29 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 23:01:29 LOG5 finish_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2010-Apr-30 23:01:29 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 23:01:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 23:01:29 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 23:01:29 LOG5 end_task: Level: (2) ID = <10278> Status = 0 0 0 0 ok 2010-Apr-30 23:01:29 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 24 of 99 2010-Apr-30 23:01:30 LOG4 send_obs_status: To obs_status: <1> LOOP 24 2010-Apr-30 23:01:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:01:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:01:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:01:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:01:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 23:01:30 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 23:01:30 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 23:01:30 LOG5 begin_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2010-Apr-30 23:01:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 23:01:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 23:01:30 INFO2 take_data: Starting WAPP 600-second scan: 12000090 2010-Apr-30 23:01:30 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 23:01:30 LOG5 begin_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2010-Apr-30 23:01:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 23:01:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 23:01:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 10891.00 2010-Apr-30 23:01:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 23:01:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0023.fits 2010-Apr-30 23:01:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0023.fits} 2010-Apr-30 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:01:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:11:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 23:11:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 23:11:31 LOG5 end_task: Level: (3) ID = <10288> Status = 0 0 0 0 ok 2010-Apr-30 23:11:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 23:11:31 LOG5 end_task: Level: (2) ID = <10287> Status = 0 0 0 0 ok 2010-Apr-30 23:11:31 LOG1 fixed_driftmap: New position: year = 2010.3311877645954 RA = 13:19:46.8 RA/Dec = 13:20:18.4 +27:59:16.0 2010-Apr-30 23:11:31 NOTE fixed_driftmap: Correcting ZA to 9:38:02.3 ... 2010-Apr-30 23:11:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6339621529 -CF 2010-Apr-30 23:11:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 23:11:31 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 23:11:31 LOG5 begin_task: Level: (2) ID = <10289> Status = 0 0 0 0 ok 2010-Apr-30 23:11:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 23:11:31 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 23:11:31 LOG5 begin_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2010-Apr-30 23:11:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 23:11:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 23:11:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 23:11:31 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 23:11:31 LOG5 begin_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2010-Apr-30 23:11:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6339621529 -CF 2010-Apr-30 23:11:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:11:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 23:11:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 23:11:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:11:31 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 23:11:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 23:11:31 LOG5 end_task: Level: (4) ID = <10291> Status = 0 0 0 0 ok 2010-Apr-30 23:11:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 23:11:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 23:11:31 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 23:11:31 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 23:11:31 LOG5 begin_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2010-Apr-30 23:11:32 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:11:32 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 23:11:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 23:11:32 LOG5 end_task: Level: (4) ID = <10292> Status = 0 0 0 0 ok 2010-Apr-30 23:11:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 23:11:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 23:11:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 23:11:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 23:11:32 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 23:11:32 LOG5 begin_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2010-Apr-30 23:11:32 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 23:11:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 23:11:32 LOG5 end_task: Level: (4) ID = <10293> Status = 0 0 0 0 ok 2010-Apr-30 23:11:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 23:11:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 23:11:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 23:11:32 LOG5 end_task: Level: (3) ID = <10290> Status = 0 0 0 0 ok 2010-Apr-30 23:11:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 23:11:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 23:11:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 23:11:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 23:11:32 LOG5 begin_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Apr-30 23:11:32 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 23:11:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 23:11:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 23:11:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 23:11:32 LOG5 end_task: Level: (3) ID = <10294> Status = 0 0 0 0 ok 2010-Apr-30 23:11:32 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 23:11:32 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 23:11:32 LOG5 begin_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2010-Apr-30 23:11:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 23:11:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 23:11:32 INFO2 take_data: Starting WAPP 1-second scan: 12000091 2010-Apr-30 23:11:32 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 23:11:32 LOG5 begin_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2010-Apr-30 23:11:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 23:11:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 23:11:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11493.00 2010-Apr-30 23:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 23:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:11:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:11:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 23:11:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 23:11:34 LOG5 end_task: Level: (4) ID = <10296> Status = 0 0 0 0 ok 2010-Apr-30 23:11:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 23:11:34 LOG5 end_task: Level: (3) ID = <10295> Status = 0 0 0 0 ok 2010-Apr-30 23:11:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 23:11:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 23:11:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 23:11:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 23:11:34 LOG5 begin_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2010-Apr-30 23:11:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 23:11:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 23:11:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 23:11:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 23:11:34 LOG5 end_task: Level: (3) ID = <10297> Status = 0 0 0 0 ok 2010-Apr-30 23:11:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 23:11:34 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 23:11:34 LOG5 finish_task: Level: (2) ID = <10289> Status = 0 0 0 0 ok 2010-Apr-30 23:11:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 23:11:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 23:11:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 23:11:34 LOG5 end_task: Level: (2) ID = <10289> Status = 0 0 0 0 ok 2010-Apr-30 23:11:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 25 of 99 2010-Apr-30 23:11:34 LOG4 send_obs_status: To obs_status: <1> LOOP 25 2010-Apr-30 23:11:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:11:35 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:11:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:11:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:11:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 23:11:35 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 23:11:35 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 23:11:35 LOG5 begin_task: Level: (2) ID = <10298> Status = 0 0 0 0 ok 2010-Apr-30 23:11:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 23:11:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 23:11:35 INFO2 take_data: Starting WAPP 600-second scan: 12000092 2010-Apr-30 23:11:35 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 23:11:35 LOG5 begin_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2010-Apr-30 23:11:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 23:11:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 23:11:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 23:11:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 11496.00 2010-Apr-30 23:11:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0024.fits 2010-Apr-30 23:11:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0024.fits} 2010-Apr-30 23:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 23:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:11:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:18:54 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 55317.138102 to 55317.138113! 2010-Apr-30 23:18:55 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (55317.138102 - 55317.138125)! 2010-Apr-30 23:21:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 23:21:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 23:21:36 LOG5 end_task: Level: (3) ID = <10299> Status = 0 0 0 0 ok 2010-Apr-30 23:21:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 23:21:36 LOG5 end_task: Level: (2) ID = <10298> Status = 0 0 0 0 ok 2010-Apr-30 23:21:36 LOG1 fixed_driftmap: New position: year = 2010.3312069358885 RA = 13:29:53.8 RA/Dec = 13:30:25.0 +27:59:18.9 2010-Apr-30 23:21:36 NOTE fixed_driftmap: Correcting ZA to 9:38:05.2 ... 2010-Apr-30 23:21:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6347787320 -CF 2010-Apr-30 23:21:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 23:21:36 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 23:21:36 LOG5 begin_task: Level: (2) ID = <10300> Status = 0 0 0 0 ok 2010-Apr-30 23:21:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 23:21:36 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 23:21:36 LOG5 begin_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2010-Apr-30 23:21:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 23:21:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 23:21:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 23:21:36 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 23:21:36 LOG5 begin_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2010-Apr-30 23:21:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6347787320 -CF 2010-Apr-30 23:21:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:21:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 23:21:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 23:21:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:21:36 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 23:21:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 23:21:36 LOG5 end_task: Level: (4) ID = <10302> Status = 0 0 0 0 ok 2010-Apr-30 23:21:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 23:21:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 23:21:36 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 23:21:36 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 23:21:36 LOG5 begin_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2010-Apr-30 23:21:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:21:37 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 23:21:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 23:21:37 LOG5 end_task: Level: (4) ID = <10303> Status = 0 0 0 0 ok 2010-Apr-30 23:21:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 23:21:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 23:21:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 23:21:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 23:21:37 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 23:21:37 LOG5 begin_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2010-Apr-30 23:21:37 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 23:21:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 23:21:37 LOG5 end_task: Level: (4) ID = <10304> Status = 0 0 0 0 ok 2010-Apr-30 23:21:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 23:21:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 23:21:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 23:21:37 LOG5 end_task: Level: (3) ID = <10301> Status = 0 0 0 0 ok 2010-Apr-30 23:21:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 23:21:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 23:21:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 23:21:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 23:21:37 LOG5 begin_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2010-Apr-30 23:21:37 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 23:21:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 23:21:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 23:21:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 23:21:37 LOG5 end_task: Level: (3) ID = <10305> Status = 0 0 0 0 ok 2010-Apr-30 23:21:37 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 23:21:37 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 23:21:37 LOG5 begin_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2010-Apr-30 23:21:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 23:21:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 23:21:37 INFO2 take_data: Starting WAPP 1-second scan: 12000093 2010-Apr-30 23:21:37 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 23:21:37 LOG5 begin_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2010-Apr-30 23:21:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 23:21:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 23:21:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12098.00 2010-Apr-30 23:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 23:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:21:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:21:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 23:21:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 23:21:39 LOG5 end_task: Level: (4) ID = <10307> Status = 0 0 0 0 ok 2010-Apr-30 23:21:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 23:21:39 LOG5 end_task: Level: (3) ID = <10306> Status = 0 0 0 0 ok 2010-Apr-30 23:21:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 23:21:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 23:21:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 23:21:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 23:21:39 LOG5 begin_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2010-Apr-30 23:21:39 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 23:21:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 23:21:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 23:21:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 23:21:39 LOG5 end_task: Level: (3) ID = <10308> Status = 0 0 0 0 ok 2010-Apr-30 23:21:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 23:21:39 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 23:21:39 LOG5 finish_task: Level: (2) ID = <10300> Status = 0 0 0 0 ok 2010-Apr-30 23:21:39 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 23:21:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 23:21:39 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 23:21:39 LOG5 end_task: Level: (2) ID = <10300> Status = 0 0 0 0 ok 2010-Apr-30 23:21:39 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 26 of 99 2010-Apr-30 23:21:39 LOG4 send_obs_status: To obs_status: <1> LOOP 26 2010-Apr-30 23:21:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:21:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:21:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:21:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:21:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 23:21:40 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 23:21:40 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 23:21:40 LOG5 begin_task: Level: (2) ID = <10309> Status = 0 0 0 0 ok 2010-Apr-30 23:21:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 23:21:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 23:21:40 INFO2 take_data: Starting WAPP 600-second scan: 12000094 2010-Apr-30 23:21:40 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 23:21:40 LOG5 begin_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2010-Apr-30 23:21:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 23:21:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 23:21:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 23:21:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12101.00 2010-Apr-30 23:21:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0025.fits 2010-Apr-30 23:21:41 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0025.fits} 2010-Apr-30 23:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 23:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:21:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:31:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 23:31:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 23:31:41 LOG5 end_task: Level: (3) ID = <10310> Status = 0 0 0 0 ok 2010-Apr-30 23:31:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 23:31:41 LOG5 end_task: Level: (2) ID = <10309> Status = 0 0 0 0 ok 2010-Apr-30 23:31:41 LOG1 fixed_driftmap: New position: year = 2010.3312261071817 RA = 13:40:00.7 RA/Dec = 13:40:31.7 +27:59:22.2 2010-Apr-30 23:31:41 NOTE fixed_driftmap: Correcting ZA to 9:38:08.5 ... 2010-Apr-30 23:31:41 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6357006036 -CF 2010-Apr-30 23:31:41 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 23:31:41 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 23:31:41 LOG5 begin_task: Level: (2) ID = <10311> Status = 0 0 0 0 ok 2010-Apr-30 23:31:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 23:31:41 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 23:31:41 LOG5 begin_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2010-Apr-30 23:31:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 23:31:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 23:31:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 23:31:41 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 23:31:41 LOG5 begin_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2010-Apr-30 23:31:41 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6357006036 -CF 2010-Apr-30 23:31:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:31:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 23:31:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 23:31:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:31:41 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 23:31:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 23:31:41 LOG5 end_task: Level: (4) ID = <10313> Status = 0 0 0 0 ok 2010-Apr-30 23:31:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 23:31:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 23:31:41 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 23:31:41 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 23:31:41 LOG5 begin_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2010-Apr-30 23:31:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:31:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 23:31:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 23:31:42 LOG5 end_task: Level: (4) ID = <10314> Status = 0 0 0 0 ok 2010-Apr-30 23:31:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 23:31:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 23:31:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 23:31:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 23:31:42 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 23:31:42 LOG5 begin_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2010-Apr-30 23:31:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 23:31:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 23:31:42 LOG5 end_task: Level: (4) ID = <10315> Status = 0 0 0 0 ok 2010-Apr-30 23:31:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 23:31:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 23:31:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 23:31:42 LOG5 end_task: Level: (3) ID = <10312> Status = 0 0 0 0 ok 2010-Apr-30 23:31:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 23:31:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 23:31:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 23:31:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 23:31:42 LOG5 begin_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2010-Apr-30 23:31:42 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 23:31:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 23:31:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 23:31:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 23:31:42 LOG5 end_task: Level: (3) ID = <10316> Status = 0 0 0 0 ok 2010-Apr-30 23:31:42 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 23:31:42 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 23:31:42 LOG5 begin_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2010-Apr-30 23:31:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 23:31:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 23:31:42 INFO2 take_data: Starting WAPP 1-second scan: 12000095 2010-Apr-30 23:31:42 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 23:31:42 LOG5 begin_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2010-Apr-30 23:31:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 23:31:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 23:31:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12703.00 2010-Apr-30 23:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 23:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:31:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:31:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 23:31:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 23:31:44 LOG5 end_task: Level: (4) ID = <10318> Status = 0 0 0 0 ok 2010-Apr-30 23:31:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 23:31:44 LOG5 end_task: Level: (3) ID = <10317> Status = 0 0 0 0 ok 2010-Apr-30 23:31:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 23:31:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 23:31:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 23:31:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 23:31:44 LOG5 begin_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2010-Apr-30 23:31:44 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 23:31:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 23:31:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 23:31:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 23:31:44 LOG5 end_task: Level: (3) ID = <10319> Status = 0 0 0 0 ok 2010-Apr-30 23:31:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 23:31:44 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 23:31:44 LOG5 finish_task: Level: (2) ID = <10311> Status = 0 0 0 0 ok 2010-Apr-30 23:31:44 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 23:31:44 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 23:31:44 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 23:31:44 LOG5 end_task: Level: (2) ID = <10311> Status = 0 0 0 0 ok 2010-Apr-30 23:31:44 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 27 of 99 2010-Apr-30 23:31:44 LOG4 send_obs_status: To obs_status: <1> LOOP 27 2010-Apr-30 23:31:44 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:31:44 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:31:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:31:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:31:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 23:31:45 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 23:31:45 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 23:31:45 LOG5 begin_task: Level: (2) ID = <10320> Status = 0 0 0 0 ok 2010-Apr-30 23:31:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 23:31:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 23:31:45 INFO2 take_data: Starting WAPP 600-second scan: 12000096 2010-Apr-30 23:31:45 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 23:31:45 LOG5 begin_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2010-Apr-30 23:31:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 23:31:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 23:31:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 23:31:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 12706.00 2010-Apr-30 23:31:45 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0026.fits 2010-Apr-30 23:31:45 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0026.fits} 2010-Apr-30 23:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 23:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:31:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:41:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 23:41:46 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 23:41:46 LOG5 end_task: Level: (3) ID = <10321> Status = 0 0 0 0 ok 2010-Apr-30 23:41:46 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 23:41:46 LOG5 end_task: Level: (2) ID = <10320> Status = 0 0 0 0 ok 2010-Apr-30 23:41:46 LOG1 fixed_driftmap: New position: year = 2010.3312452784749 RA = 13:50:07.6 RA/Dec = 13:50:38.3 +27:59:25.9 2010-Apr-30 23:41:46 NOTE fixed_driftmap: Correcting ZA to 9:38:12.2 ... 2010-Apr-30 23:41:46 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6367259715 -CF 2010-Apr-30 23:41:46 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 23:41:46 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 23:41:46 LOG5 begin_task: Level: (2) ID = <10322> Status = 0 0 0 0 ok 2010-Apr-30 23:41:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 23:41:46 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 23:41:46 LOG5 begin_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2010-Apr-30 23:41:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 23:41:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 23:41:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 23:41:46 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 23:41:46 LOG5 begin_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2010-Apr-30 23:41:46 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6367259715 -CF 2010-Apr-30 23:41:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:41:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 23:41:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 23:41:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:41:46 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 23:41:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 23:41:46 LOG5 end_task: Level: (4) ID = <10324> Status = 0 0 0 0 ok 2010-Apr-30 23:41:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 23:41:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 23:41:46 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 23:41:46 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 23:41:46 LOG5 begin_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2010-Apr-30 23:41:46 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:41:47 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 23:41:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 23:41:47 LOG5 end_task: Level: (4) ID = <10325> Status = 0 0 0 0 ok 2010-Apr-30 23:41:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 23:41:47 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 23:41:47 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 23:41:47 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 23:41:47 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 23:41:47 LOG5 begin_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2010-Apr-30 23:41:47 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 23:41:47 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 23:41:47 LOG5 end_task: Level: (4) ID = <10326> Status = 0 0 0 0 ok 2010-Apr-30 23:41:47 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 23:41:47 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 23:41:47 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 23:41:47 LOG5 end_task: Level: (3) ID = <10323> Status = 0 0 0 0 ok 2010-Apr-30 23:41:47 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 23:41:47 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 23:41:47 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 23:41:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 23:41:47 LOG5 begin_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2010-Apr-30 23:41:47 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 23:41:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 23:41:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 23:41:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 23:41:47 LOG5 end_task: Level: (3) ID = <10327> Status = 0 0 0 0 ok 2010-Apr-30 23:41:47 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 23:41:47 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 23:41:47 LOG5 begin_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2010-Apr-30 23:41:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 23:41:47 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 23:41:47 INFO2 take_data: Starting WAPP 1-second scan: 12000097 2010-Apr-30 23:41:47 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 23:41:47 LOG5 begin_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2010-Apr-30 23:41:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 23:41:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 23:41:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13308.00 2010-Apr-30 23:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 23:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:41:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:41:49 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 23:41:49 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 23:41:49 LOG5 end_task: Level: (4) ID = <10329> Status = 0 0 0 0 ok 2010-Apr-30 23:41:49 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 23:41:49 LOG5 end_task: Level: (3) ID = <10328> Status = 0 0 0 0 ok 2010-Apr-30 23:41:49 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 23:41:49 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 23:41:49 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 23:41:49 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 23:41:49 LOG5 begin_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2010-Apr-30 23:41:50 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 23:41:50 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 23:41:50 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 23:41:50 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 23:41:50 LOG5 end_task: Level: (3) ID = <10330> Status = 0 0 0 0 ok 2010-Apr-30 23:41:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 23:41:50 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 23:41:50 LOG5 finish_task: Level: (2) ID = <10322> Status = 0 0 0 0 ok 2010-Apr-30 23:41:50 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 23:41:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 23:41:50 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 23:41:50 LOG5 end_task: Level: (2) ID = <10322> Status = 0 0 0 0 ok 2010-Apr-30 23:41:50 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 28 of 99 2010-Apr-30 23:41:50 LOG4 send_obs_status: To obs_status: <1> LOOP 28 2010-Apr-30 23:41:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:41:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:41:50 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:41:50 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:41:50 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 23:41:50 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 23:41:50 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 23:41:50 LOG5 begin_task: Level: (2) ID = <10331> Status = 0 0 0 0 ok 2010-Apr-30 23:41:50 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 23:41:50 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 23:41:50 INFO2 take_data: Starting WAPP 600-second scan: 12000098 2010-Apr-30 23:41:50 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 23:41:50 LOG5 begin_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2010-Apr-30 23:41:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 23:41:50 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 23:41:50 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 23:41:50 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13311.00 2010-Apr-30 23:41:51 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0027.fits 2010-Apr-30 23:41:51 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0027.fits} 2010-Apr-30 23:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 23:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:41:52 LOG3 WAPP=1+2+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:41:52 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:41:52 LOG3 WAPP=3-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:43:39 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 23:43:39.296 (seconds: 85419.296)!} 2010-Apr-30 23:43:39 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 23:43:39.296 (seconds: 85419.296)! 2010-Apr-30 23:43:40 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 85418.0 to 85419.0! 2010-Apr-30 23:43:41 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (85418.0 - 85420.0)! 2010-Apr-30 23:51:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 23:51:51 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 23:51:51 LOG5 end_task: Level: (3) ID = <10332> Status = 0 0 0 0 ok 2010-Apr-30 23:51:51 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 23:51:51 LOG5 end_task: Level: (2) ID = <10331> Status = 0 0 0 0 ok 2010-Apr-30 23:51:51 LOG1 fixed_driftmap: New position: year = 2010.331264449768 RA = 14:00:14.6 RA/Dec = 14:00:45.0 +27:59:30.0 2010-Apr-30 23:51:51 NOTE fixed_driftmap: Correcting ZA to 9:38:16.3 ... 2010-Apr-30 23:51:51 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6378528380 -CF 2010-Apr-30 23:51:51 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-Apr-30 23:51:51 START begin_task: Starting task 'WAPP calibration' 2010-Apr-30 23:51:51 LOG5 begin_task: Level: (2) ID = <10333> Status = 0 0 0 0 ok 2010-Apr-30 23:51:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-Apr-30 23:51:51 START begin_task: Starting task 'selecting calibration type' 2010-Apr-30 23:51:51 LOG5 begin_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2010-Apr-30 23:51:51 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-Apr-30 23:51:51 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-Apr-30 23:51:51 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 23:51:51 START begin_task: Starting task 'waiting on setcal' 2010-Apr-30 23:51:51 LOG5 begin_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2010-Apr-30 23:51:51 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6378528380 -CF 2010-Apr-30 23:51:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:51:51 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-Apr-30 23:51:51 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-Apr-30 23:51:51 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:51:52 LOG4 got_cormsg: From DATATAKING: DONE 2010-Apr-30 23:51:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-Apr-30 23:51:52 LOG5 end_task: Level: (4) ID = <10335> Status = 0 0 0 0 ok 2010-Apr-30 23:51:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-Apr-30 23:51:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 23:51:52 LOG3 socket_wait: To ALFAMON: CAL HI 2010-Apr-30 23:51:52 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 23:51:52 LOG5 begin_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2010-Apr-30 23:51:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-Apr-30 23:51:52 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 23:51:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 23:51:52 LOG5 end_task: Level: (4) ID = <10336> Status = 0 0 0 0 ok 2010-Apr-30 23:51:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 23:51:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-Apr-30 23:51:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-Apr-30 23:51:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-Apr-30 23:51:52 START begin_task: Starting task 'waiting on command to ALFA' 2010-Apr-30 23:51:52 LOG5 begin_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2010-Apr-30 23:51:52 LOG4 got_alfamon: From ALFAMON: ACK 2010-Apr-30 23:51:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-Apr-30 23:51:52 LOG5 end_task: Level: (4) ID = <10337> Status = 0 0 0 0 ok 2010-Apr-30 23:51:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-Apr-30 23:51:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-Apr-30 23:51:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-Apr-30 23:51:52 LOG5 end_task: Level: (3) ID = <10334> Status = 0 0 0 0 ok 2010-Apr-30 23:51:52 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-Apr-30 23:51:52 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-Apr-30 23:51:52 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-Apr-30 23:51:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 23:51:52 LOG5 begin_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Apr-30 23:51:52 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 23:51:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-Apr-30 23:51:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 23:51:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 23:51:52 LOG5 end_task: Level: (3) ID = <10338> Status = 0 0 0 0 ok 2010-Apr-30 23:51:52 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-Apr-30 23:51:52 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 23:51:52 LOG5 begin_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2010-Apr-30 23:51:52 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-Apr-30 23:51:52 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 23:51:52 INFO2 take_data: Starting WAPP 1-second scan: 12000099 2010-Apr-30 23:51:52 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 23:51:52 LOG5 begin_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2010-Apr-30 23:51:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 23:51:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13913.00 2010-Apr-30 23:51:53 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-Apr-30 23:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 23:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:51:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:51:54 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-Apr-30 23:51:54 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-Apr-30 23:51:54 LOG5 end_task: Level: (4) ID = <10340> Status = 0 0 0 0 ok 2010-Apr-30 23:51:54 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-Apr-30 23:51:54 LOG5 end_task: Level: (3) ID = <10339> Status = 0 0 0 0 ok 2010-Apr-30 23:51:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-Apr-30 23:51:54 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-Apr-30 23:51:54 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-Apr-30 23:51:54 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-Apr-30 23:51:54 LOG5 begin_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2010-Apr-30 23:51:54 LOG3 CALCONTROL-caltrig: Software trigger 2010-Apr-30 23:51:54 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-Apr-30 23:51:54 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-Apr-30 23:51:54 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-Apr-30 23:51:54 LOG5 end_task: Level: (3) ID = <10341> Status = 0 0 0 0 ok 2010-Apr-30 23:51:54 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-Apr-30 23:51:54 STOP finish_task: Finishing task 'WAPP calibration' 2010-Apr-30 23:51:54 LOG5 finish_task: Level: (2) ID = <10333> Status = 0 0 0 0 ok 2010-Apr-30 23:51:54 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-Apr-30 23:51:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-Apr-30 23:51:54 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-Apr-30 23:51:54 LOG5 end_task: Level: (2) ID = <10333> Status = 0 0 0 0 ok 2010-Apr-30 23:51:54 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 29 of 99 2010-Apr-30 23:51:55 LOG4 send_obs_status: To obs_status: <1> LOOP 29 2010-Apr-30 23:51:55 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:51:55 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:51:55 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:51:55 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-Apr-30 23:51:55 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-Apr-30 23:51:55 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-Apr-30 23:51:55 START begin_task: Starting task 'WAPP spectral observation' 2010-Apr-30 23:51:55 LOG5 begin_task: Level: (2) ID = <10342> Status = 0 0 0 0 ok 2010-Apr-30 23:51:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-Apr-30 23:51:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-Apr-30 23:51:55 INFO2 take_data: Starting WAPP 600-second scan: 12000100 2010-Apr-30 23:51:55 START begin_task: Starting task 'waiting on WAPP spectra' 2010-Apr-30 23:51:55 LOG5 begin_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2010-Apr-30 23:51:55 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-Apr-30 23:51:55 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-Apr-30 23:51:55 INFO1 WAPP=1+2+3+4-start_spectra: start sec 13916.00 2010-Apr-30 23:51:55 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-Apr-30 23:51:55 NOTE WAPPDATA-new_file: New FITS file: wapp.20100430.a2010.0028.fits 2010-Apr-30 23:51:55 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100430.a2010.0028.fits} 2010-Apr-30 23:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-Apr-30 23:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:51:57 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-Apr-30 23:55:01 WARNING WAPPDATA-search_pnt: WARNING extrapolating pnt-data from 55317.163183 to 55317.163194! 2010-Apr-30 23:55:02 WARNING WAPPDATA-search_pnt: WARNING interpolating pnt-data over 2.00 second time gap (55317.163183 - 55317.163206)! 2010-May-01 00:01:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 00:01:56 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 00:01:56 LOG5 end_task: Level: (3) ID = <10343> Status = 0 0 0 0 ok 2010-May-01 00:01:56 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 00:01:56 LOG5 end_task: Level: (2) ID = <10342> Status = 0 0 0 0 ok 2010-May-01 00:01:56 LOG1 fixed_driftmap: New position: year = 2010.3312836210612 RA = 14:10:21.5 RA/Dec = 14:10:51.6 +27:59:34.4 2010-May-01 00:01:56 NOTE fixed_driftmap: Correcting ZA to 9:38:20.7 ... 2010-May-01 00:01:56 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6390790003 -CF 2010-May-01 00:01:56 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-01 00:01:56 START begin_task: Starting task 'WAPP calibration' 2010-May-01 00:01:56 LOG5 begin_task: Level: (2) ID = <10344> Status = 0 0 0 0 ok 2010-May-01 00:01:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-01 00:01:56 START begin_task: Starting task 'selecting calibration type' 2010-May-01 00:01:56 LOG5 begin_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2010-May-01 00:01:56 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-01 00:01:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-01 00:01:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-01 00:01:56 START begin_task: Starting task 'waiting on setcal' 2010-May-01 00:01:56 LOG5 begin_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2010-May-01 00:01:56 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6390790003 -CF 2010-May-01 00:01:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:01:56 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-01 00:01:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-01 00:01:56 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:01:56 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-01 00:01:56 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-01 00:01:56 LOG5 end_task: Level: (4) ID = <10346> Status = 0 0 0 0 ok 2010-May-01 00:01:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-01 00:01:56 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 00:01:57 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-01 00:01:57 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 00:01:57 LOG5 begin_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2010-May-01 00:01:57 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:01:57 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 00:01:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 00:01:57 LOG5 end_task: Level: (4) ID = <10347> Status = 0 0 0 0 ok 2010-May-01 00:01:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 00:01:57 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-01 00:01:57 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 00:01:57 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-01 00:01:57 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 00:01:57 LOG5 begin_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2010-May-01 00:01:57 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 00:01:57 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 00:01:57 LOG5 end_task: Level: (4) ID = <10348> Status = 0 0 0 0 ok 2010-May-01 00:01:57 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 00:01:57 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-01 00:01:57 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-01 00:01:57 LOG5 end_task: Level: (3) ID = <10345> Status = 0 0 0 0 ok 2010-May-01 00:01:57 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-01 00:01:57 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-01 00:01:57 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-01 00:01:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 00:01:57 LOG5 begin_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2010-May-01 00:01:57 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 00:01:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-01 00:01:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 00:01:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 00:01:57 LOG5 end_task: Level: (3) ID = <10349> Status = 0 0 0 0 ok 2010-May-01 00:01:57 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-01 00:01:57 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 00:01:57 LOG5 begin_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2010-May-01 00:01:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-01 00:01:57 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 00:01:57 INFO2 take_data: Starting WAPP 1-second scan: 12100001 2010-May-01 00:01:57 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 00:01:57 LOG5 begin_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2010-May-01 00:01:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 00:01:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-01 00:01:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14518.00 2010-May-01 00:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 00:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:01:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:01:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 00:01:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 00:01:59 LOG5 end_task: Level: (4) ID = <10351> Status = 0 0 0 0 ok 2010-May-01 00:01:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 00:01:59 LOG5 end_task: Level: (3) ID = <10350> Status = 0 0 0 0 ok 2010-May-01 00:01:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-01 00:01:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-01 00:01:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-01 00:01:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 00:01:59 LOG5 begin_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2010-May-01 00:01:59 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 00:01:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-01 00:01:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 00:01:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 00:01:59 LOG5 end_task: Level: (3) ID = <10352> Status = 0 0 0 0 ok 2010-May-01 00:01:59 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-01 00:01:59 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-01 00:01:59 LOG5 finish_task: Level: (2) ID = <10344> Status = 0 0 0 0 ok 2010-May-01 00:01:59 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-01 00:01:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-01 00:01:59 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-01 00:01:59 LOG5 end_task: Level: (2) ID = <10344> Status = 0 0 0 0 ok 2010-May-01 00:01:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 30 of 99 2010-May-01 00:01:59 LOG4 send_obs_status: To obs_status: <1> LOOP 30 2010-May-01 00:01:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-May-01 00:01:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-May-01 00:01:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-May-01 00:02:00 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-May-01 00:02:00 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-01 00:02:00 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-01 00:02:00 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 00:02:00 LOG5 begin_task: Level: (2) ID = <10353> Status = 0 0 0 0 ok 2010-May-01 00:02:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-01 00:02:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 00:02:00 INFO2 take_data: Starting WAPP 600-second scan: 12100002 2010-May-01 00:02:00 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 00:02:00 LOG5 begin_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2010-May-01 00:02:00 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-May-01 00:02:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 00:02:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-01 00:02:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 14521.00 2010-May-01 00:02:00 NOTE WAPPDATA-new_file: New FITS file: wapp.20100501.a2010.0000.fits 2010-May-01 00:02:00 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100501.a2010.0000.fits} 2010-May-01 00:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 00:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:02:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:12:01 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 00:12:01 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 00:12:01 LOG5 end_task: Level: (3) ID = <10354> Status = 0 0 0 0 ok 2010-May-01 00:12:01 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 00:12:01 LOG5 end_task: Level: (2) ID = <10353> Status = 0 0 0 0 ok 2010-May-01 00:12:01 LOG1 fixed_driftmap: New position: year = 2010.3313027923543 RA = 14:20:28.4 RA/Dec = 14:20:58.3 +27:59:39.1 2010-May-01 00:12:01 NOTE fixed_driftmap: Correcting ZA to 9:38:25.4 ... 2010-May-01 00:12:01 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6404020847 -CF 2010-May-01 00:12:01 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-01 00:12:01 START begin_task: Starting task 'WAPP calibration' 2010-May-01 00:12:01 LOG5 begin_task: Level: (2) ID = <10355> Status = 0 0 0 0 ok 2010-May-01 00:12:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-01 00:12:01 START begin_task: Starting task 'selecting calibration type' 2010-May-01 00:12:01 LOG5 begin_task: Level: (3) ID = <10356> Status = 0 0 0 0 ok 2010-May-01 00:12:01 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-01 00:12:01 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-01 00:12:01 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-01 00:12:01 START begin_task: Starting task 'waiting on setcal' 2010-May-01 00:12:01 LOG5 begin_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2010-May-01 00:12:01 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6404020847 -CF 2010-May-01 00:12:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:12:01 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-01 00:12:01 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-01 00:12:01 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:12:01 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-01 00:12:01 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-01 00:12:01 LOG5 end_task: Level: (4) ID = <10357> Status = 0 0 0 0 ok 2010-May-01 00:12:01 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-01 00:12:01 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 00:12:01 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-01 00:12:01 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 00:12:01 LOG5 begin_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2010-May-01 00:12:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:12:02 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 00:12:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 00:12:02 LOG5 end_task: Level: (4) ID = <10358> Status = 0 0 0 0 ok 2010-May-01 00:12:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 00:12:02 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-01 00:12:02 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 00:12:02 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-01 00:12:02 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 00:12:02 LOG5 begin_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2010-May-01 00:12:02 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 00:12:02 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 00:12:02 LOG5 end_task: Level: (4) ID = <10359> Status = 0 0 0 0 ok 2010-May-01 00:12:02 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 00:12:02 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-01 00:12:02 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-01 00:12:02 LOG5 end_task: Level: (3) ID = <10356> Status = 0 0 0 0 ok 2010-May-01 00:12:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-01 00:12:02 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-01 00:12:02 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-01 00:12:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 00:12:02 LOG5 begin_task: Level: (3) ID = <10360> Status = 0 0 0 0 ok 2010-May-01 00:12:02 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 00:12:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-01 00:12:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 00:12:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 00:12:02 LOG5 end_task: Level: (3) ID = <10360> Status = 0 0 0 0 ok 2010-May-01 00:12:02 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-01 00:12:02 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 00:12:02 LOG5 begin_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2010-May-01 00:12:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-01 00:12:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 00:12:02 INFO2 take_data: Starting WAPP 1-second scan: 12100003 2010-May-01 00:12:02 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 00:12:02 LOG5 begin_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2010-May-01 00:12:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 00:12:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-01 00:12:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15123.00 2010-May-01 00:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 00:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:12:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:12:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 00:12:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 00:12:04 LOG5 end_task: Level: (4) ID = <10362> Status = 0 0 0 0 ok 2010-May-01 00:12:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 00:12:04 LOG5 end_task: Level: (3) ID = <10361> Status = 0 0 0 0 ok 2010-May-01 00:12:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-01 00:12:04 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-01 00:12:04 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-01 00:12:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 00:12:04 LOG5 begin_task: Level: (3) ID = <10363> Status = 0 0 0 0 ok 2010-May-01 00:12:04 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 00:12:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-01 00:12:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 00:12:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 00:12:04 LOG5 end_task: Level: (3) ID = <10363> Status = 0 0 0 0 ok 2010-May-01 00:12:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-01 00:12:04 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-01 00:12:04 LOG5 finish_task: Level: (2) ID = <10355> Status = 0 0 0 0 ok 2010-May-01 00:12:04 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-01 00:12:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-01 00:12:04 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-01 00:12:04 LOG5 end_task: Level: (2) ID = <10355> Status = 0 0 0 0 ok 2010-May-01 00:12:04 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 31 of 99 2010-May-01 00:12:04 LOG4 send_obs_status: To obs_status: <1> LOOP 31 2010-May-01 00:12:04 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-May-01 00:12:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-May-01 00:12:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-May-01 00:12:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-May-01 00:12:05 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-01 00:12:05 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-01 00:12:05 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 00:12:05 LOG5 begin_task: Level: (2) ID = <10364> Status = 0 0 0 0 ok 2010-May-01 00:12:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-01 00:12:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 00:12:05 INFO2 take_data: Starting WAPP 600-second scan: 12100004 2010-May-01 00:12:05 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 00:12:05 LOG5 begin_task: Level: (3) ID = <10365> Status = 0 0 0 0 ok 2010-May-01 00:12:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-May-01 00:12:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 00:12:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-01 00:12:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15126.00 2010-May-01 00:12:05 NOTE WAPPDATA-new_file: New FITS file: wapp.20100501.a2010.0001.fits 2010-May-01 00:12:05 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100501.a2010.0001.fits} 2010-May-01 00:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 00:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:12:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:13:37 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 00:13:37.298 (seconds: 817.298)!} 2010-May-01 00:13:37 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 00:13:37.298 (seconds: 817.298)! 2010-May-01 00:13:38 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 816.0 to 817.0! 2010-May-01 00:13:39 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (816.0 - 818.0)! 2010-May-01 00:22:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 00:22:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 00:22:06 LOG5 end_task: Level: (3) ID = <10365> Status = 0 0 0 0 ok 2010-May-01 00:22:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 00:22:06 LOG5 end_task: Level: (2) ID = <10364> Status = 0 0 0 0 ok 2010-May-01 00:22:06 LOG1 fixed_driftmap: New position: year = 2010.3313219636475 RA = 14:30:35.3 RA/Dec = 14:31:04.9 +27:59:44.3 2010-May-01 00:22:06 NOTE fixed_driftmap: Correcting ZA to 9:38:30.6 ... 2010-May-01 00:22:06 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6418194902 -CF 2010-May-01 00:22:06 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-01 00:22:06 START begin_task: Starting task 'WAPP calibration' 2010-May-01 00:22:06 LOG5 begin_task: Level: (2) ID = <10366> Status = 0 0 0 0 ok 2010-May-01 00:22:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-01 00:22:06 START begin_task: Starting task 'selecting calibration type' 2010-May-01 00:22:06 LOG5 begin_task: Level: (3) ID = <10367> Status = 0 0 0 0 ok 2010-May-01 00:22:06 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-01 00:22:06 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-01 00:22:06 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-01 00:22:06 START begin_task: Starting task 'waiting on setcal' 2010-May-01 00:22:06 LOG5 begin_task: Level: (4) ID = <10368> Status = 0 0 0 0 ok 2010-May-01 00:22:06 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6418194902 -CF 2010-May-01 00:22:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:22:06 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-01 00:22:06 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-01 00:22:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:22:06 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-01 00:22:06 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-01 00:22:06 LOG5 end_task: Level: (4) ID = <10368> Status = 0 0 0 0 ok 2010-May-01 00:22:06 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-01 00:22:06 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 00:22:06 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-01 00:22:06 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 00:22:06 LOG5 begin_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2010-May-01 00:22:06 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:22:07 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 00:22:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 00:22:07 LOG5 end_task: Level: (4) ID = <10369> Status = 0 0 0 0 ok 2010-May-01 00:22:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 00:22:07 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-01 00:22:07 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 00:22:07 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-01 00:22:07 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 00:22:07 LOG5 begin_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2010-May-01 00:22:07 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 00:22:07 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 00:22:07 LOG5 end_task: Level: (4) ID = <10370> Status = 0 0 0 0 ok 2010-May-01 00:22:07 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 00:22:07 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-01 00:22:07 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-01 00:22:07 LOG5 end_task: Level: (3) ID = <10367> Status = 0 0 0 0 ok 2010-May-01 00:22:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-01 00:22:07 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-01 00:22:07 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-01 00:22:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 00:22:07 LOG5 begin_task: Level: (3) ID = <10371> Status = 0 0 0 0 ok 2010-May-01 00:22:07 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 00:22:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-01 00:22:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 00:22:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 00:22:07 LOG5 end_task: Level: (3) ID = <10371> Status = 0 0 0 0 ok 2010-May-01 00:22:07 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-01 00:22:07 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 00:22:07 LOG5 begin_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2010-May-01 00:22:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-01 00:22:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 00:22:07 INFO2 take_data: Starting WAPP 1-second scan: 12100005 2010-May-01 00:22:07 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 00:22:07 LOG5 begin_task: Level: (4) ID = <10373> Status = 0 0 0 0 ok 2010-May-01 00:22:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 00:22:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-01 00:22:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15728.00 2010-May-01 00:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 00:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:22:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:22:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 00:22:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 00:22:09 LOG5 end_task: Level: (4) ID = <10373> Status = 0 0 0 0 ok 2010-May-01 00:22:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 00:22:09 LOG5 end_task: Level: (3) ID = <10372> Status = 0 0 0 0 ok 2010-May-01 00:22:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-01 00:22:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-01 00:22:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-01 00:22:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 00:22:09 LOG5 begin_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2010-May-01 00:22:10 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 00:22:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-01 00:22:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 00:22:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 00:22:10 LOG5 end_task: Level: (3) ID = <10374> Status = 0 0 0 0 ok 2010-May-01 00:22:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-01 00:22:10 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-01 00:22:10 LOG5 finish_task: Level: (2) ID = <10366> Status = 0 0 0 0 ok 2010-May-01 00:22:10 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-01 00:22:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-01 00:22:10 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-01 00:22:10 LOG5 end_task: Level: (2) ID = <10366> Status = 0 0 0 0 ok 2010-May-01 00:22:10 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 32 of 99 2010-May-01 00:22:10 LOG4 send_obs_status: To obs_status: <1> LOOP 32 2010-May-01 00:22:10 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-May-01 00:22:10 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-May-01 00:22:10 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-May-01 00:22:10 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-May-01 00:22:10 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-01 00:22:10 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-01 00:22:10 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 00:22:10 LOG5 begin_task: Level: (2) ID = <10375> Status = 0 0 0 0 ok 2010-May-01 00:22:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-01 00:22:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 00:22:10 INFO2 take_data: Starting WAPP 600-second scan: 12100006 2010-May-01 00:22:10 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 00:22:10 LOG5 begin_task: Level: (3) ID = <10376> Status = 0 0 0 0 ok 2010-May-01 00:22:10 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-May-01 00:22:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 00:22:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-01 00:22:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 15731.00 2010-May-01 00:22:10 NOTE WAPPDATA-new_file: New FITS file: wapp.20100501.a2010.0002.fits 2010-May-01 00:22:10 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100501.a2010.0002.fits} 2010-May-01 00:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 00:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:22:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:32:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 00:32:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 00:32:11 LOG5 end_task: Level: (3) ID = <10376> Status = 0 0 0 0 ok 2010-May-01 00:32:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 00:32:11 LOG5 end_task: Level: (2) ID = <10375> Status = 0 0 0 0 ok 2010-May-01 00:32:11 LOG1 fixed_driftmap: New position: year = 2010.3313411349407 RA = 14:40:42.3 RA/Dec = 14:41:11.6 +27:59:49.7 2010-May-01 00:32:11 NOTE fixed_driftmap: Correcting ZA to 9:38:36.0 ... 2010-May-01 00:32:11 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6433284807 -CF 2010-May-01 00:32:11 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-01 00:32:11 START begin_task: Starting task 'WAPP calibration' 2010-May-01 00:32:11 LOG5 begin_task: Level: (2) ID = <10377> Status = 0 0 0 0 ok 2010-May-01 00:32:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-01 00:32:11 START begin_task: Starting task 'selecting calibration type' 2010-May-01 00:32:11 LOG5 begin_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2010-May-01 00:32:11 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-01 00:32:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-01 00:32:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-01 00:32:11 START begin_task: Starting task 'waiting on setcal' 2010-May-01 00:32:11 LOG5 begin_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2010-May-01 00:32:11 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6433284807 -CF 2010-May-01 00:32:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:32:11 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-01 00:32:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-01 00:32:11 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:32:12 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-01 00:32:12 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-01 00:32:12 LOG5 end_task: Level: (4) ID = <10379> Status = 0 0 0 0 ok 2010-May-01 00:32:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-01 00:32:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 00:32:12 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-01 00:32:12 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 00:32:12 LOG5 begin_task: Level: (4) ID = <10380> Status = 0 0 0 0 ok 2010-May-01 00:32:12 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:32:12 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 00:32:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 00:32:12 LOG5 end_task: Level: (4) ID = <10380> Status = 0 0 0 0 ok 2010-May-01 00:32:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 00:32:12 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-01 00:32:12 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 00:32:12 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-01 00:32:12 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 00:32:12 LOG5 begin_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2010-May-01 00:32:12 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 00:32:12 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 00:32:12 LOG5 end_task: Level: (4) ID = <10381> Status = 0 0 0 0 ok 2010-May-01 00:32:12 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 00:32:12 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-01 00:32:12 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-01 00:32:12 LOG5 end_task: Level: (3) ID = <10378> Status = 0 0 0 0 ok 2010-May-01 00:32:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-01 00:32:12 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-01 00:32:12 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-01 00:32:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 00:32:12 LOG5 begin_task: Level: (3) ID = <10382> Status = 0 0 0 0 ok 2010-May-01 00:32:12 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 00:32:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-01 00:32:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 00:32:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 00:32:12 LOG5 end_task: Level: (3) ID = <10382> Status = 0 0 0 0 ok 2010-May-01 00:32:12 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-01 00:32:12 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 00:32:12 LOG5 begin_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2010-May-01 00:32:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-01 00:32:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 00:32:12 INFO2 take_data: Starting WAPP 1-second scan: 12100007 2010-May-01 00:32:12 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 00:32:12 LOG5 begin_task: Level: (4) ID = <10384> Status = 0 0 0 0 ok 2010-May-01 00:32:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 00:32:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16333.00 2010-May-01 00:32:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-01 00:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 00:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:32:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:32:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 00:32:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 00:32:14 LOG5 end_task: Level: (4) ID = <10384> Status = 0 0 0 0 ok 2010-May-01 00:32:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 00:32:14 LOG5 end_task: Level: (3) ID = <10383> Status = 0 0 0 0 ok 2010-May-01 00:32:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-01 00:32:14 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-01 00:32:14 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-01 00:32:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 00:32:14 LOG5 begin_task: Level: (3) ID = <10385> Status = 0 0 0 0 ok 2010-May-01 00:32:14 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 00:32:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-01 00:32:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 00:32:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 00:32:14 LOG5 end_task: Level: (3) ID = <10385> Status = 0 0 0 0 ok 2010-May-01 00:32:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-01 00:32:14 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-01 00:32:14 LOG5 finish_task: Level: (2) ID = <10377> Status = 0 0 0 0 ok 2010-May-01 00:32:14 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-01 00:32:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-01 00:32:14 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-01 00:32:14 LOG5 end_task: Level: (2) ID = <10377> Status = 0 0 0 0 ok 2010-May-01 00:32:14 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 33 of 99 2010-May-01 00:32:15 LOG4 send_obs_status: To obs_status: <1> LOOP 33 2010-May-01 00:32:15 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-May-01 00:32:15 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-May-01 00:32:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-May-01 00:32:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-May-01 00:32:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-01 00:32:15 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-01 00:32:15 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 00:32:15 LOG5 begin_task: Level: (2) ID = <10386> Status = 0 0 0 0 ok 2010-May-01 00:32:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-01 00:32:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 00:32:15 INFO2 take_data: Starting WAPP 600-second scan: 12100008 2010-May-01 00:32:15 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 00:32:15 LOG5 begin_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2010-May-01 00:32:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-May-01 00:32:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 00:32:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16336.00 2010-May-01 00:32:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-01 00:32:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20100501.a2010.0003.fits 2010-May-01 00:32:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100501.a2010.0003.fits} 2010-May-01 00:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 00:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:32:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:42:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 00:42:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 00:42:16 LOG5 end_task: Level: (3) ID = <10387> Status = 0 0 0 0 ok 2010-May-01 00:42:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 00:42:16 LOG5 end_task: Level: (2) ID = <10386> Status = 0 0 0 0 ok 2010-May-01 00:42:16 LOG1 fixed_driftmap: New position: year = 2010.3313603062338 RA = 14:50:49.2 RA/Dec = 14:51:18.3 +27:59:55.4 2010-May-01 00:42:16 NOTE fixed_driftmap: Correcting ZA to 9:38:41.7 ... 2010-May-01 00:42:16 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6449260905 -CF 2010-May-01 00:42:16 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-01 00:42:16 START begin_task: Starting task 'WAPP calibration' 2010-May-01 00:42:16 LOG5 begin_task: Level: (2) ID = <10388> Status = 0 0 0 0 ok 2010-May-01 00:42:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-01 00:42:16 START begin_task: Starting task 'selecting calibration type' 2010-May-01 00:42:16 LOG5 begin_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2010-May-01 00:42:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-01 00:42:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-01 00:42:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-01 00:42:16 START begin_task: Starting task 'waiting on setcal' 2010-May-01 00:42:16 LOG5 begin_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2010-May-01 00:42:16 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6449260905 -CF 2010-May-01 00:42:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:42:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-01 00:42:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-01 00:42:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:42:16 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-01 00:42:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-01 00:42:16 LOG5 end_task: Level: (4) ID = <10390> Status = 0 0 0 0 ok 2010-May-01 00:42:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-01 00:42:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 00:42:16 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-01 00:42:16 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 00:42:16 LOG5 begin_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2010-May-01 00:42:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:42:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 00:42:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 00:42:17 LOG5 end_task: Level: (4) ID = <10391> Status = 0 0 0 0 ok 2010-May-01 00:42:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 00:42:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-01 00:42:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 00:42:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-01 00:42:17 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 00:42:17 LOG5 begin_task: Level: (4) ID = <10392> Status = 0 0 0 0 ok 2010-May-01 00:42:17 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 00:42:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 00:42:17 LOG5 end_task: Level: (4) ID = <10392> Status = 0 0 0 0 ok 2010-May-01 00:42:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 00:42:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-01 00:42:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-01 00:42:17 LOG5 end_task: Level: (3) ID = <10389> Status = 0 0 0 0 ok 2010-May-01 00:42:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-01 00:42:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-01 00:42:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-01 00:42:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 00:42:17 LOG5 begin_task: Level: (3) ID = <10393> Status = 0 0 0 0 ok 2010-May-01 00:42:17 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 00:42:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-01 00:42:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 00:42:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 00:42:17 LOG5 end_task: Level: (3) ID = <10393> Status = 0 0 0 0 ok 2010-May-01 00:42:17 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-01 00:42:17 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 00:42:17 LOG5 begin_task: Level: (3) ID = <10394> Status = 0 0 0 0 ok 2010-May-01 00:42:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-01 00:42:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 00:42:17 INFO2 take_data: Starting WAPP 1-second scan: 12100009 2010-May-01 00:42:17 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 00:42:17 LOG5 begin_task: Level: (4) ID = <10395> Status = 0 0 0 0 ok 2010-May-01 00:42:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 00:42:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-01 00:42:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16938.00 2010-May-01 00:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 00:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:42:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:42:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 00:42:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 00:42:19 LOG5 end_task: Level: (4) ID = <10395> Status = 0 0 0 0 ok 2010-May-01 00:42:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 00:42:19 LOG5 end_task: Level: (3) ID = <10394> Status = 0 0 0 0 ok 2010-May-01 00:42:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-01 00:42:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-01 00:42:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-01 00:42:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 00:42:19 LOG5 begin_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2010-May-01 00:42:19 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 00:42:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-01 00:42:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 00:42:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 00:42:19 LOG5 end_task: Level: (3) ID = <10396> Status = 0 0 0 0 ok 2010-May-01 00:42:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-01 00:42:19 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-01 00:42:19 LOG5 finish_task: Level: (2) ID = <10388> Status = 0 0 0 0 ok 2010-May-01 00:42:19 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-01 00:42:19 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-01 00:42:19 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-01 00:42:19 LOG5 end_task: Level: (2) ID = <10388> Status = 0 0 0 0 ok 2010-May-01 00:42:19 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 34 of 99 2010-May-01 00:42:19 LOG4 send_obs_status: To obs_status: <1> LOOP 34 2010-May-01 00:42:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-May-01 00:42:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-May-01 00:42:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-May-01 00:42:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-May-01 00:42:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-01 00:42:20 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-01 00:42:20 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 00:42:20 LOG5 begin_task: Level: (2) ID = <10397> Status = 0 0 0 0 ok 2010-May-01 00:42:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-01 00:42:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 00:42:20 INFO2 take_data: Starting WAPP 600-second scan: 12100010 2010-May-01 00:42:20 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 00:42:20 LOG5 begin_task: Level: (3) ID = <10398> Status = 0 0 0 0 ok 2010-May-01 00:42:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-May-01 00:42:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 00:42:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-01 00:42:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 16941.00 2010-May-01 00:42:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20100501.a2010.0004.fits 2010-May-01 00:42:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100501.a2010.0004.fits} 2010-May-01 00:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 00:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:42:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:43:35 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 00:43:35.311 (seconds: 2615.311)!} 2010-May-01 00:43:35 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 00:43:35.311 (seconds: 2615.311)! 2010-May-01 00:43:36 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 2614.0 to 2615.0! 2010-May-01 00:43:37 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (2614.0 - 2616.0)! 2010-May-01 00:52:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 00:52:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 00:52:21 LOG5 end_task: Level: (3) ID = <10398> Status = 0 0 0 0 ok 2010-May-01 00:52:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 00:52:21 LOG5 end_task: Level: (2) ID = <10397> Status = 0 0 0 0 ok 2010-May-01 00:52:21 LOG1 fixed_driftmap: New position: year = 2010.331379477527 RA = 15:00:56.1 RA/Dec = 15:01:24.9 +28:00:01.5 2010-May-01 00:52:21 NOTE fixed_driftmap: Correcting ZA to 9:38:47.8 ... 2010-May-01 00:52:21 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6466092158 -CF 2010-May-01 00:52:21 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-01 00:52:21 START begin_task: Starting task 'WAPP calibration' 2010-May-01 00:52:21 LOG5 begin_task: Level: (2) ID = <10399> Status = 0 0 0 0 ok 2010-May-01 00:52:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-01 00:52:21 START begin_task: Starting task 'selecting calibration type' 2010-May-01 00:52:21 LOG5 begin_task: Level: (3) ID = <10400> Status = 0 0 0 0 ok 2010-May-01 00:52:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-01 00:52:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-01 00:52:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-01 00:52:21 START begin_task: Starting task 'waiting on setcal' 2010-May-01 00:52:21 LOG5 begin_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2010-May-01 00:52:21 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6466092158 -CF 2010-May-01 00:52:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:52:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-01 00:52:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-01 00:52:21 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:52:21 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-01 00:52:21 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-01 00:52:21 LOG5 end_task: Level: (4) ID = <10401> Status = 0 0 0 0 ok 2010-May-01 00:52:21 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-01 00:52:21 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 00:52:21 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-01 00:52:21 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 00:52:21 LOG5 begin_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2010-May-01 00:52:22 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 00:52:22 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 00:52:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 00:52:22 LOG5 end_task: Level: (4) ID = <10402> Status = 0 0 0 0 ok 2010-May-01 00:52:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 00:52:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-01 00:52:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 00:52:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-01 00:52:22 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 00:52:22 LOG5 begin_task: Level: (4) ID = <10403> Status = 0 0 0 0 ok 2010-May-01 00:52:22 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 00:52:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 00:52:22 LOG5 end_task: Level: (4) ID = <10403> Status = 0 0 0 0 ok 2010-May-01 00:52:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 00:52:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-01 00:52:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-01 00:52:22 LOG5 end_task: Level: (3) ID = <10400> Status = 0 0 0 0 ok 2010-May-01 00:52:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-01 00:52:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-01 00:52:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-01 00:52:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 00:52:22 LOG5 begin_task: Level: (3) ID = <10404> Status = 0 0 0 0 ok 2010-May-01 00:52:22 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 00:52:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-01 00:52:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 00:52:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 00:52:22 LOG5 end_task: Level: (3) ID = <10404> Status = 0 0 0 0 ok 2010-May-01 00:52:22 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-01 00:52:22 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 00:52:22 LOG5 begin_task: Level: (3) ID = <10405> Status = 0 0 0 0 ok 2010-May-01 00:52:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-01 00:52:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 00:52:22 INFO2 take_data: Starting WAPP 1-second scan: 12100011 2010-May-01 00:52:22 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 00:52:22 LOG5 begin_task: Level: (4) ID = <10406> Status = 0 0 0 0 ok 2010-May-01 00:52:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 00:52:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-01 00:52:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17543.00 2010-May-01 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:52:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:52:24 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 00:52:24 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 00:52:24 LOG5 end_task: Level: (4) ID = <10406> Status = 0 0 0 0 ok 2010-May-01 00:52:24 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 00:52:24 LOG5 end_task: Level: (3) ID = <10405> Status = 0 0 0 0 ok 2010-May-01 00:52:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-01 00:52:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-01 00:52:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-01 00:52:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 00:52:24 LOG5 begin_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2010-May-01 00:52:24 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 00:52:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-01 00:52:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 00:52:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 00:52:24 LOG5 end_task: Level: (3) ID = <10407> Status = 0 0 0 0 ok 2010-May-01 00:52:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-01 00:52:24 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-01 00:52:24 LOG5 finish_task: Level: (2) ID = <10399> Status = 0 0 0 0 ok 2010-May-01 00:52:24 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-01 00:52:24 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-01 00:52:24 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-01 00:52:24 LOG5 end_task: Level: (2) ID = <10399> Status = 0 0 0 0 ok 2010-May-01 00:52:24 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 35 of 99 2010-May-01 00:52:24 LOG4 send_obs_status: To obs_status: <1> LOOP 35 2010-May-01 00:52:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-May-01 00:52:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-May-01 00:52:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-May-01 00:52:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-May-01 00:52:25 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-01 00:52:25 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-01 00:52:25 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 00:52:25 LOG5 begin_task: Level: (2) ID = <10408> Status = 0 0 0 0 ok 2010-May-01 00:52:25 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-01 00:52:25 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 00:52:25 INFO2 take_data: Starting WAPP 600-second scan: 12100012 2010-May-01 00:52:25 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 00:52:25 LOG5 begin_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2010-May-01 00:52:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-May-01 00:52:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 00:52:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-01 00:52:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 17546.00 2010-May-01 00:52:25 NOTE WAPPDATA-new_file: New FITS file: wapp.20100501.a2010.0005.fits 2010-May-01 00:52:25 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100501.a2010.0005.fits} 2010-May-01 00:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 00:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:52:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 00:58:34 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 00:58:34.302 (seconds: 3514.302)!} 2010-May-01 00:58:34 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 00:58:34.302 (seconds: 3514.302)! 2010-May-01 00:58:35 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 3513.0 to 3514.0! 2010-May-01 00:58:36 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (3513.0 - 3515.0)! 2010-May-01 01:02:26 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:02:26 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 01:02:26 LOG5 end_task: Level: (3) ID = <10409> Status = 0 0 0 0 ok 2010-May-01 01:02:26 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 01:02:26 LOG5 end_task: Level: (2) ID = <10408> Status = 0 0 0 0 ok 2010-May-01 01:02:26 LOG1 fixed_driftmap: New position: year = 2010.3313986488199 RA = 15:11:03.0 RA/Dec = 15:11:31.6 +28:00:07.9 2010-May-01 01:02:26 NOTE fixed_driftmap: Correcting ZA to 9:38:54.1 ... 2010-May-01 01:02:26 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6483745889 -CF 2010-May-01 01:02:26 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-01 01:02:26 START begin_task: Starting task 'WAPP calibration' 2010-May-01 01:02:26 LOG5 begin_task: Level: (2) ID = <10410> Status = 0 0 0 0 ok 2010-May-01 01:02:26 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-01 01:02:26 START begin_task: Starting task 'selecting calibration type' 2010-May-01 01:02:26 LOG5 begin_task: Level: (3) ID = <10411> Status = 0 0 0 0 ok 2010-May-01 01:02:26 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-01 01:02:26 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-01 01:02:26 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-01 01:02:26 START begin_task: Starting task 'waiting on setcal' 2010-May-01 01:02:26 LOG5 begin_task: Level: (4) ID = <10412> Status = 0 0 0 0 ok 2010-May-01 01:02:26 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6483745889 -CF 2010-May-01 01:02:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:02:26 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-01 01:02:26 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-01 01:02:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:02:26 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-01 01:02:26 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-01 01:02:26 LOG5 end_task: Level: (4) ID = <10412> Status = 0 0 0 0 ok 2010-May-01 01:02:26 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-01 01:02:26 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 01:02:26 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-01 01:02:26 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 01:02:26 LOG5 begin_task: Level: (4) ID = <10413> Status = 0 0 0 0 ok 2010-May-01 01:02:26 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:02:27 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 01:02:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 01:02:27 LOG5 end_task: Level: (4) ID = <10413> Status = 0 0 0 0 ok 2010-May-01 01:02:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 01:02:27 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-01 01:02:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 01:02:27 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-01 01:02:27 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 01:02:27 LOG5 begin_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2010-May-01 01:02:27 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 01:02:27 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 01:02:27 LOG5 end_task: Level: (4) ID = <10414> Status = 0 0 0 0 ok 2010-May-01 01:02:27 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 01:02:27 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-01 01:02:27 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-01 01:02:27 LOG5 end_task: Level: (3) ID = <10411> Status = 0 0 0 0 ok 2010-May-01 01:02:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-01 01:02:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-01 01:02:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-01 01:02:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 01:02:27 LOG5 begin_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2010-May-01 01:02:27 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 01:02:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-01 01:02:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 01:02:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 01:02:27 LOG5 end_task: Level: (3) ID = <10415> Status = 0 0 0 0 ok 2010-May-01 01:02:27 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-01 01:02:27 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 01:02:27 LOG5 begin_task: Level: (3) ID = <10416> Status = 0 0 0 0 ok 2010-May-01 01:02:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-01 01:02:27 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 01:02:27 INFO2 take_data: Starting WAPP 1-second scan: 12100013 2010-May-01 01:02:27 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 01:02:27 LOG5 begin_task: Level: (4) ID = <10417> Status = 0 0 0 0 ok 2010-May-01 01:02:27 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:02:27 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-01 01:02:27 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18148.00 2010-May-01 01:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:02:29 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:02:29 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:02:29 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 01:02:29 LOG5 end_task: Level: (4) ID = <10417> Status = 0 0 0 0 ok 2010-May-01 01:02:29 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 01:02:29 LOG5 end_task: Level: (3) ID = <10416> Status = 0 0 0 0 ok 2010-May-01 01:02:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-01 01:02:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-01 01:02:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-01 01:02:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 01:02:29 LOG5 begin_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2010-May-01 01:02:29 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 01:02:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-01 01:02:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 01:02:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 01:02:29 LOG5 end_task: Level: (3) ID = <10418> Status = 0 0 0 0 ok 2010-May-01 01:02:29 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-01 01:02:29 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-01 01:02:29 LOG5 finish_task: Level: (2) ID = <10410> Status = 0 0 0 0 ok 2010-May-01 01:02:29 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-01 01:02:29 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-01 01:02:29 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-01 01:02:29 LOG5 end_task: Level: (2) ID = <10410> Status = 0 0 0 0 ok 2010-May-01 01:02:29 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 36 of 99 2010-May-01 01:02:29 LOG4 send_obs_status: To obs_status: <1> LOOP 36 2010-May-01 01:02:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-May-01 01:02:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-May-01 01:02:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-May-01 01:02:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-May-01 01:02:30 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-01 01:02:30 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-01 01:02:30 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 01:02:30 LOG5 begin_task: Level: (2) ID = <10419> Status = 0 0 0 0 ok 2010-May-01 01:02:30 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-01 01:02:30 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 01:02:30 INFO2 take_data: Starting WAPP 600-second scan: 12100014 2010-May-01 01:02:30 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 01:02:30 LOG5 begin_task: Level: (3) ID = <10420> Status = 0 0 0 0 ok 2010-May-01 01:02:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-May-01 01:02:30 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:02:30 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-01 01:02:30 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18151.00 2010-May-01 01:02:30 NOTE WAPPDATA-new_file: New FITS file: wapp.20100501.a2010.0006.fits 2010-May-01 01:02:30 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100501.a2010.0006.fits} 2010-May-01 01:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:02:32 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:12:31 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:12:31 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 01:12:31 LOG5 end_task: Level: (3) ID = <10420> Status = 0 0 0 0 ok 2010-May-01 01:12:31 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 01:12:31 LOG5 end_task: Level: (2) ID = <10419> Status = 0 0 0 0 ok 2010-May-01 01:12:31 LOG1 fixed_driftmap: New position: year = 2010.3314178201131 RA = 15:21:09.8 RA/Dec = 15:21:38.2 +28:00:14.5 2010-May-01 01:12:31 NOTE fixed_driftmap: Correcting ZA to 9:39:00.8 ... 2010-May-01 01:12:31 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6502187505 -CF 2010-May-01 01:12:31 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-01 01:12:31 START begin_task: Starting task 'WAPP calibration' 2010-May-01 01:12:31 LOG5 begin_task: Level: (2) ID = <10421> Status = 0 0 0 0 ok 2010-May-01 01:12:31 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-01 01:12:31 START begin_task: Starting task 'selecting calibration type' 2010-May-01 01:12:31 LOG5 begin_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2010-May-01 01:12:31 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-01 01:12:31 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-01 01:12:31 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-01 01:12:31 START begin_task: Starting task 'waiting on setcal' 2010-May-01 01:12:31 LOG5 begin_task: Level: (4) ID = <10423> Status = 0 0 0 0 ok 2010-May-01 01:12:31 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6502187505 -CF 2010-May-01 01:12:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:12:31 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-01 01:12:31 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-01 01:12:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:12:31 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-01 01:12:31 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-01 01:12:31 LOG5 end_task: Level: (4) ID = <10423> Status = 0 0 0 0 ok 2010-May-01 01:12:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-01 01:12:31 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 01:12:31 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-01 01:12:31 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 01:12:31 LOG5 begin_task: Level: (4) ID = <10424> Status = 0 0 0 0 ok 2010-May-01 01:12:31 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:12:32 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 01:12:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 01:12:32 LOG5 end_task: Level: (4) ID = <10424> Status = 0 0 0 0 ok 2010-May-01 01:12:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 01:12:32 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-01 01:12:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 01:12:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-01 01:12:32 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 01:12:32 LOG5 begin_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2010-May-01 01:12:32 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 01:12:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 01:12:32 LOG5 end_task: Level: (4) ID = <10425> Status = 0 0 0 0 ok 2010-May-01 01:12:32 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 01:12:32 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-01 01:12:32 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-01 01:12:32 LOG5 end_task: Level: (3) ID = <10422> Status = 0 0 0 0 ok 2010-May-01 01:12:32 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-01 01:12:32 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-01 01:12:32 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-01 01:12:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 01:12:32 LOG5 begin_task: Level: (3) ID = <10426> Status = 0 0 0 0 ok 2010-May-01 01:12:32 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 01:12:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-01 01:12:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 01:12:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 01:12:32 LOG5 end_task: Level: (3) ID = <10426> Status = 0 0 0 0 ok 2010-May-01 01:12:32 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-01 01:12:32 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 01:12:32 LOG5 begin_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2010-May-01 01:12:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-01 01:12:32 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 01:12:32 INFO2 take_data: Starting WAPP 1-second scan: 12100015 2010-May-01 01:12:32 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 01:12:32 LOG5 begin_task: Level: (4) ID = <10428> Status = 0 0 0 0 ok 2010-May-01 01:12:32 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:12:32 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-01 01:12:32 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18753.00 2010-May-01 01:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:12:34 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:12:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:12:34 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 01:12:34 LOG5 end_task: Level: (4) ID = <10428> Status = 0 0 0 0 ok 2010-May-01 01:12:34 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 01:12:34 LOG5 end_task: Level: (3) ID = <10427> Status = 0 0 0 0 ok 2010-May-01 01:12:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-01 01:12:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-01 01:12:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-01 01:12:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 01:12:34 LOG5 begin_task: Level: (3) ID = <10429> Status = 0 0 0 0 ok 2010-May-01 01:12:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 01:12:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-01 01:12:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 01:12:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 01:12:34 LOG5 end_task: Level: (3) ID = <10429> Status = 0 0 0 0 ok 2010-May-01 01:12:34 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-01 01:12:34 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-01 01:12:34 LOG5 finish_task: Level: (2) ID = <10421> Status = 0 0 0 0 ok 2010-May-01 01:12:34 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-01 01:12:34 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-01 01:12:34 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-01 01:12:34 LOG5 end_task: Level: (2) ID = <10421> Status = 0 0 0 0 ok 2010-May-01 01:12:34 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 37 of 99 2010-May-01 01:12:34 LOG4 send_obs_status: To obs_status: <1> LOOP 37 2010-May-01 01:12:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-May-01 01:12:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-May-01 01:12:35 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-May-01 01:12:35 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-May-01 01:12:35 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-01 01:12:35 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-01 01:12:35 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 01:12:35 LOG5 begin_task: Level: (2) ID = <10430> Status = 0 0 0 0 ok 2010-May-01 01:12:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-01 01:12:35 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 01:12:35 INFO2 take_data: Starting WAPP 600-second scan: 12100016 2010-May-01 01:12:35 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 01:12:35 LOG5 begin_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2010-May-01 01:12:35 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-May-01 01:12:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:12:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-01 01:12:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 18756.00 2010-May-01 01:12:35 NOTE WAPPDATA-new_file: New FITS file: wapp.20100501.a2010.0007.fits 2010-May-01 01:12:35 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100501.a2010.0007.fits} 2010-May-01 01:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:12:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:13:33 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 01:13:33.303 (seconds: 4413.303)!} 2010-May-01 01:13:33 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 01:13:33.303 (seconds: 4413.303)! 2010-May-01 01:13:34 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 4412.0 to 4413.0! 2010-May-01 01:13:35 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (4412.0 - 4414.0)! 2010-May-01 01:22:36 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:22:36 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 01:22:36 LOG5 end_task: Level: (3) ID = <10431> Status = 0 0 0 0 ok 2010-May-01 01:22:36 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 01:22:36 LOG5 end_task: Level: (2) ID = <10430> Status = 0 0 0 0 ok 2010-May-01 01:22:36 LOG1 fixed_driftmap: New position: year = 2010.3314369914062 RA = 15:31:16.7 RA/Dec = 15:31:44.9 +28:00:21.4 2010-May-01 01:22:36 NOTE fixed_driftmap: Correcting ZA to 9:39:07.7 ... 2010-May-01 01:22:36 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6521381076 -CF 2010-May-01 01:22:36 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-01 01:22:36 START begin_task: Starting task 'WAPP calibration' 2010-May-01 01:22:36 LOG5 begin_task: Level: (2) ID = <10432> Status = 0 0 0 0 ok 2010-May-01 01:22:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-01 01:22:36 START begin_task: Starting task 'selecting calibration type' 2010-May-01 01:22:36 LOG5 begin_task: Level: (3) ID = <10433> Status = 0 0 0 0 ok 2010-May-01 01:22:36 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-01 01:22:36 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-01 01:22:36 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-01 01:22:36 START begin_task: Starting task 'waiting on setcal' 2010-May-01 01:22:36 LOG5 begin_task: Level: (4) ID = <10434> Status = 0 0 0 0 ok 2010-May-01 01:22:36 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6521381076 -CF 2010-May-01 01:22:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:22:36 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-01 01:22:36 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-01 01:22:36 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:22:36 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-01 01:22:36 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-01 01:22:36 LOG5 end_task: Level: (4) ID = <10434> Status = 0 0 0 0 ok 2010-May-01 01:22:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-01 01:22:36 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 01:22:36 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-01 01:22:36 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 01:22:36 LOG5 begin_task: Level: (4) ID = <10435> Status = 0 0 0 0 ok 2010-May-01 01:22:37 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:22:37 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 01:22:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 01:22:37 LOG5 end_task: Level: (4) ID = <10435> Status = 0 0 0 0 ok 2010-May-01 01:22:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 01:22:37 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-01 01:22:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 01:22:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-01 01:22:37 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 01:22:37 LOG5 begin_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2010-May-01 01:22:37 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 01:22:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 01:22:37 LOG5 end_task: Level: (4) ID = <10436> Status = 0 0 0 0 ok 2010-May-01 01:22:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 01:22:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-01 01:22:37 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-01 01:22:37 LOG5 end_task: Level: (3) ID = <10433> Status = 0 0 0 0 ok 2010-May-01 01:22:37 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-01 01:22:37 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-01 01:22:37 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-01 01:22:37 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 01:22:37 LOG5 begin_task: Level: (3) ID = <10437> Status = 0 0 0 0 ok 2010-May-01 01:22:37 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 01:22:37 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-01 01:22:37 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 01:22:37 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 01:22:37 LOG5 end_task: Level: (3) ID = <10437> Status = 0 0 0 0 ok 2010-May-01 01:22:37 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-01 01:22:37 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 01:22:37 LOG5 begin_task: Level: (3) ID = <10438> Status = 0 0 0 0 ok 2010-May-01 01:22:37 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-01 01:22:37 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 01:22:37 INFO2 take_data: Starting WAPP 1-second scan: 12100017 2010-May-01 01:22:37 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 01:22:37 LOG5 begin_task: Level: (4) ID = <10439> Status = 0 0 0 0 ok 2010-May-01 01:22:37 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:22:37 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-01 01:22:37 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19358.00 2010-May-01 01:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:22:39 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:22:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:22:39 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 01:22:39 LOG5 end_task: Level: (4) ID = <10439> Status = 0 0 0 0 ok 2010-May-01 01:22:39 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 01:22:39 LOG5 end_task: Level: (3) ID = <10438> Status = 0 0 0 0 ok 2010-May-01 01:22:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-01 01:22:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-01 01:22:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-01 01:22:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 01:22:39 LOG5 begin_task: Level: (3) ID = <10440> Status = 0 0 0 0 ok 2010-May-01 01:22:39 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 01:22:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-01 01:22:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 01:22:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 01:22:39 LOG5 end_task: Level: (3) ID = <10440> Status = 0 0 0 0 ok 2010-May-01 01:22:39 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-01 01:22:39 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-01 01:22:39 LOG5 finish_task: Level: (2) ID = <10432> Status = 0 0 0 0 ok 2010-May-01 01:22:39 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-01 01:22:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-01 01:22:39 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-01 01:22:39 LOG5 end_task: Level: (2) ID = <10432> Status = 0 0 0 0 ok 2010-May-01 01:22:39 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 38 of 99 2010-May-01 01:22:39 LOG4 send_obs_status: To obs_status: <1> LOOP 38 2010-May-01 01:22:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-May-01 01:22:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-May-01 01:22:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-May-01 01:22:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-May-01 01:22:40 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-01 01:22:40 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-01 01:22:40 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 01:22:40 LOG5 begin_task: Level: (2) ID = <10441> Status = 0 0 0 0 ok 2010-May-01 01:22:40 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-01 01:22:40 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 01:22:40 INFO2 take_data: Starting WAPP 600-second scan: 12100018 2010-May-01 01:22:40 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 01:22:40 LOG5 begin_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2010-May-01 01:22:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-May-01 01:22:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:22:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-01 01:22:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19361.00 2010-May-01 01:22:40 NOTE WAPPDATA-new_file: New FITS file: wapp.20100501.a2010.0008.fits 2010-May-01 01:22:40 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100501.a2010.0008.fits} 2010-May-01 01:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:22:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:28:32 LOG4 exec_msg: From SCRAMWAPPDATA: log_message INFO4 WAPPDATA-queue_agcdata {Received duplicate AGC-datablock at 01:28:32.295 (seconds: 5312.295)!} 2010-May-01 01:28:32 INFO4 WAPPDATA-queue_agcdata: Received duplicate AGC-datablock at 01:28:32.295 (seconds: 5312.295)! 2010-May-01 01:28:33 INFO4 WAPPDATA-search_agc: Extrapolating agc-data from 5311.0 to 5312.0! 2010-May-01 01:28:34 INFO4 WAPPDATA-search_agc: Interpolating agc-data over 2.00 second time gap (5311.0 - 5313.0)! 2010-May-01 01:32:41 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:32:41 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 01:32:41 LOG5 end_task: Level: (3) ID = <10442> Status = 0 0 0 0 ok 2010-May-01 01:32:41 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 01:32:41 LOG5 end_task: Level: (2) ID = <10441> Status = 0 0 0 0 ok 2010-May-01 01:32:41 LOG1 fixed_driftmap: New position: year = 2010.3314561626994 RA = 15:41:23.6 RA/Dec = 15:41:51.5 +28:00:28.6 2010-May-01 01:32:41 NOTE fixed_driftmap: Correcting ZA to 9:39:14.9 ... 2010-May-01 01:32:41 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 9.6541289453 -CF 2010-May-01 01:32:41 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2010-May-01 01:32:41 START begin_task: Starting task 'WAPP calibration' 2010-May-01 01:32:41 LOG5 begin_task: Level: (2) ID = <10443> Status = 0 0 0 0 ok 2010-May-01 01:32:41 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2010-May-01 01:32:41 START begin_task: Starting task 'selecting calibration type' 2010-May-01 01:32:41 LOG5 begin_task: Level: (3) ID = <10444> Status = 0 0 0 0 ok 2010-May-01 01:32:41 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-01 01:32:41 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-01 01:32:41 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-01 01:32:41 START begin_task: Starting task 'waiting on setcal' 2010-May-01 01:32:41 LOG5 begin_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2010-May-01 01:32:41 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 9.6541289453 -CF 2010-May-01 01:32:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:32:41 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-01 01:32:41 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-01 01:32:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:32:41 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-01 01:32:41 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-01 01:32:41 LOG5 end_task: Level: (4) ID = <10445> Status = 0 0 0 0 ok 2010-May-01 01:32:41 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-01 01:32:41 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 01:32:41 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-01 01:32:41 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 01:32:41 LOG5 begin_task: Level: (4) ID = <10446> Status = 0 0 0 0 ok 2010-May-01 01:32:41 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:32:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 01:32:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 01:32:42 LOG5 end_task: Level: (4) ID = <10446> Status = 0 0 0 0 ok 2010-May-01 01:32:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 01:32:42 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-01 01:32:42 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 01:32:42 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-01 01:32:42 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 01:32:42 LOG5 begin_task: Level: (4) ID = <10447> Status = 0 0 0 0 ok 2010-May-01 01:32:42 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 01:32:42 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 01:32:42 LOG5 end_task: Level: (4) ID = <10447> Status = 0 0 0 0 ok 2010-May-01 01:32:42 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 01:32:42 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-01 01:32:42 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-01 01:32:42 LOG5 end_task: Level: (3) ID = <10444> Status = 0 0 0 0 ok 2010-May-01 01:32:42 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2010-May-01 01:32:42 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-01 01:32:42 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-01 01:32:42 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 01:32:42 LOG5 begin_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2010-May-01 01:32:42 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 01:32:42 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-01 01:32:42 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 01:32:42 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 01:32:42 LOG5 end_task: Level: (3) ID = <10448> Status = 0 0 0 0 ok 2010-May-01 01:32:42 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2010-May-01 01:32:42 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 01:32:42 LOG5 begin_task: Level: (3) ID = <10449> Status = 0 0 0 0 ok 2010-May-01 01:32:42 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2010-May-01 01:32:42 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 01:32:42 INFO2 take_data: Starting WAPP 1-second scan: 12100019 2010-May-01 01:32:42 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 01:32:42 LOG5 begin_task: Level: (4) ID = <10450> Status = 0 0 0 0 ok 2010-May-01 01:32:42 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:32:42 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2010-May-01 01:32:42 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19963.00 2010-May-01 01:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:32:44 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:32:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:32:44 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2010-May-01 01:32:44 LOG5 end_task: Level: (4) ID = <10450> Status = 0 0 0 0 ok 2010-May-01 01:32:44 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2010-May-01 01:32:44 LOG5 end_task: Level: (3) ID = <10449> Status = 0 0 0 0 ok 2010-May-01 01:32:44 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2010-May-01 01:32:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-01 01:32:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-01 01:32:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 01:32:44 LOG5 begin_task: Level: (3) ID = <10451> Status = 0 0 0 0 ok 2010-May-01 01:32:45 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 01:32:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-01 01:32:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 01:32:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 01:32:45 LOG5 end_task: Level: (3) ID = <10451> Status = 0 0 0 0 ok 2010-May-01 01:32:45 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-01 01:32:45 STOP finish_task: Finishing task 'WAPP calibration' 2010-May-01 01:32:45 LOG5 finish_task: Level: (2) ID = <10443> Status = 0 0 0 0 ok 2010-May-01 01:32:45 INFO2 finish_task: DONE finished calibration: WAPP calibration 2010-May-01 01:32:45 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-01 01:32:45 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2010-May-01 01:32:45 LOG5 end_task: Level: (2) ID = <10443> Status = 0 0 0 0 ok 2010-May-01 01:32:45 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 39 of 99 2010-May-01 01:32:45 LOG4 send_obs_status: To obs_status: <1> LOOP 39 2010-May-01 01:32:45 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-May-01 01:32:45 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-May-01 01:32:45 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-May-01 01:32:45 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-May-01 01:32:45 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2010-May-01 01:32:45 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2010-May-01 01:32:45 START begin_task: Starting task 'WAPP spectral observation' 2010-May-01 01:32:45 LOG5 begin_task: Level: (2) ID = <10452> Status = 0 0 0 0 ok 2010-May-01 01:32:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2010-May-01 01:32:45 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2010-May-01 01:32:45 INFO2 take_data: Starting WAPP 600-second scan: 12100020 2010-May-01 01:32:45 START begin_task: Starting task 'waiting on WAPP spectra' 2010-May-01 01:32:45 LOG5 begin_task: Level: (3) ID = <10453> Status = 0 0 0 0 ok 2010-May-01 01:32:45 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-May-01 01:32:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:32:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2010-May-01 01:32:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 19966.00 2010-May-01 01:32:45 NOTE WAPPDATA-new_file: New FITS file: wapp.20100501.a2010.0009.fits 2010-May-01 01:32:45 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100501.a2010.0009.fits} 2010-May-01 01:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:32:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:32:58 COMMAND CIMA-send_to_exec: Sending command to abort observation 2010-May-01 01:32:58 LOG4 exec_msg: From OBSERVER: abort_task abort 2010-May-01 01:32:58 WARNING abort_task: WARNING abort requested! 2010-May-01 01:32:58 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2010-May-01 01:32:58 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2010-May-01 01:32:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2010-May-01 01:32:58 LOG5 end_task: Level: (3) ID = <10453> Status = 1 0 0 0 abort 2010-May-01 01:32:58 LOG4 stop_backends: Calling 'stop_backends' 2010-May-01 01:32:58 START begin_task: Starting task 'stopping the WAPPs' 2010-May-01 01:32:58 LOG5 begin_task: Level: (3) ID = <10454> Status = 1 0 0 0 abort 2010-May-01 01:32:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2010-May-01 01:32:58 INFO1 stop_wapp: Stopping the WAPPs 2010-May-01 01:32:58 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2010-May-01 01:32:58 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2010-May-01 01:32:58 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2010-May-01 01:32:58 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2010-May-01 01:32:58 START begin_task: Starting task 'waiting on stopping WAPPs' 2010-May-01 01:32:58 LOG5 begin_task: Level: (4) ID = <10455> Status = 1 0 0 0 abort 2010-May-01 01:32:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2010-May-01 01:32:59 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2010-May-01 01:32:59 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2010-May-01 01:32:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:32:59 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2010-May-01 01:32:59 LOG5 end_task: Level: (4) ID = <10455> Status = 1 0 0 0 abort 2010-May-01 01:32:59 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2010-May-01 01:32:59 LOG5 end_task: Level: (3) ID = <10454> Status = 1 0 0 0 abort 2010-May-01 01:32:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2010-May-01 01:32:59 LOG5 end_task: Level: (2) ID = <10452> Status = 1 0 0 0 abort 2010-May-01 01:32:59 STOP finish_task: Finishing task 'fixed azimuth drift map' 2010-May-01 01:32:59 LOG5 finish_task: Level: (1) ID = <10018> Status = 1 0 0 0 abort 2010-May-01 01:32:59 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2010-May-01 01:32:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2010-May-01 01:32:59 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2010-May-01 01:32:59 LOG5 end_task: Level: (1) ID = <10018> Status = 1 0 0 0 abort 2010-May-01 01:33:08 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2010-May-01 01:33:08 LOG4 exec_msg: From OBSERVER: restart_wapp 2010-May-01 01:33:08 LOG5 restart_wapp: Calling 'restart_wapp' 2010-May-01 01:33:08 BEGIN begin_task: Starting task 'restarting the WAPPs' 2010-May-01 01:33:08 LOG5 begin_task: Level: (1) ID = <10456> Status = 0 0 0 0 ok 2010-May-01 01:33:08 NOTE restart_wapp: Restarting all WAPPs 2010-May-01 01:33:08 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2010-May-01 01:33:08 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2010-May-01 01:33:08 LOG5 end_task: Level: (1) ID = <10456> Status = 0 0 0 0 ok 2010-May-01 01:33:08 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-01 01:33:08 LOG3 exec_msg: Closing socket 2010-May-01 01:33:08 LOG3 exec_msg: Closing socket 2010-May-01 01:33:08 LOG3 exec_msg: Closing socket 2010-May-01 01:33:08 LOG3 exec_msg: Closing socket 2010-May-01 01:33:11 ALERT WAPP=2-wappcon: WAPP2 restarting 2010-May-01 01:33:11 ALERT WAPP=1-wappcon: WAPP1 restarting 2010-May-01 01:33:11 ALERT WAPP=3-wappcon: WAPP3 restarting 2010-May-01 01:33:11 ALERT WAPP=4-wappcon: WAPP4 restarting 2010-May-01 01:33:25 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc_mar10.cmd' 2010-May-01 01:33:30 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc_mar10.cmd' to executive ... 2010-May-01 01:33:30 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 7 {LOAD togs_10.conf} 2010-May-01 01:33:30 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 8 {CATALOG galfa_togs.cat} 2010-May-01 01:33:30 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 9 {SEEK galfasrc} 2010-May-01 01:33:30 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 10 {TRACKCURPOS} 2010-May-01 01:33:30 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 11 {ALFAANGLE 19.} 2010-May-01 01:33:30 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 12 {WAITTRACK} 2010-May-01 01:33:30 LOG4 exec_msg: From OBSERVER: store_command_file_line 7 16 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2010-May-01 01:33:30 COMMAND CIMA-send_to_exec: Sending command to run command file 2010-May-01 01:33:30 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc_mar10.cmd 1 1 7 2010-May-01 01:33:30 LOG4 run_command_file: Calling 'run_command_file command_galfasrc_mar10.cmd 1 1 7' 2010-May-01 01:33:30 BEGIN begin_task: Starting task 'running command file 'command_galfasrc_mar10.cmd'' 2010-May-01 01:33:30 LOG5 begin_task: Level: (1) ID = <10457> Status = 0 0 0 0 ok 2010-May-01 01:33:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc_mar10.cmd' ...} 2010-May-01 01:33:30 NOTE run_command_file: Starting execution of command file 'command_galfasrc_mar10.cmd' from line 1 2010-May-01 01:33:30 COMMAND run_command_line: EXECUTING command 7: 'LOAD togs_10.conf' 2010-May-01 01:33:30 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2010-May-01 01:33:30 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-01 01:33:30 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2010-May-01 01:33:30 NOTE CIMA-load_config_file: Loading configuration file 'togs_10.conf' 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2010-May-01 01:33:31 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2010-May-01 01:33:32 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-01 01:33:32 BEGIN begin_task: Starting task 'configuring IF/LO path' 2010-May-01 01:33:32 LOG5 begin_task: Level: (2) ID = <10458> Status = 0 0 0 0 ok 2010-May-01 01:33:32 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2010-May-01 01:33:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2010-May-01 01:33:32 LOG1 config_iflo: Receiver ALFA already selected 2010-May-01 01:33:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 01:33:32 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-01 01:33:32 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 01:33:32 LOG5 begin_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2010-May-01 01:33:32 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 01:33:32 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 01:33:32 LOG5 end_task: Level: (3) ID = <10459> Status = 0 0 0 0 ok 2010-May-01 01:33:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 01:33:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-01 01:33:33 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2010-May-01 01:33:33 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2010-May-01 01:33:33 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2010-May-01 01:33:33 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2010-May-01 01:33:33 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2010-May-01 01:33:33 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2010-May-01 01:33:33 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2010-May-01 01:33:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-May-01 01:33:33 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2010-May-01 01:33:33 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2010-May-01 01:33:33 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2010-May-01 01:33:33 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2010-May-01 01:33:33 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2010-May-01 01:33:33 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2010-May-01 01:33:33 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2010-May-01 01:33:33 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2010-May-01 01:33:33 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2010-May-01 01:33:33 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2010-May-01 01:33:33 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2010-May-01 01:33:33 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2010-May-01 01:33:33 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2010-May-01 01:33:33 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2010-May-01 01:33:33 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2010-May-01 01:33:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:33:33 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2010-May-01 01:33:33 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2010-May-01 01:33:33 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2010-May-01 01:33:33 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2010-May-01 01:33:33 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2010-May-01 01:33:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2010-May-01 01:33:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-01 01:33:33 START begin_task: Starting task 'waiting on configuring IF/LO path' 2010-May-01 01:33:33 LOG5 begin_task: Level: (3) ID = <10460> Status = 0 0 0 0 ok 2010-May-01 01:33:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-May-01 01:33:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2010-May-01 01:33:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:33:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-01 01:33:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:33:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:33:33 LOG4 got_cormsg: From DATATAKING: vw% DONE 2010-May-01 01:33:33 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2010-May-01 01:33:33 LOG5 end_task: Level: (3) ID = <10460> Status = 0 0 0 0 ok 2010-May-01 01:33:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2010-May-01 01:33:33 STOP finish_task: Finishing task 'configuring IF/LO path' 2010-May-01 01:33:33 LOG5 finish_task: Level: (2) ID = <10458> Status = 0 0 0 0 ok 2010-May-01 01:33:33 DONE finish_task: DONE finished configuration: IF/LO path 2010-May-01 01:33:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-01 01:33:33 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2010-May-01 01:33:33 LOG5 end_task: Level: (2) ID = <10458> Status = 0 0 0 0 ok 2010-May-01 01:33:33 BEGIN begin_task: Starting task 'configuring WAPPs' 2010-May-01 01:33:33 LOG5 begin_task: Level: (2) ID = <10461> Status = 0 0 0 0 ok 2010-May-01 01:33:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2010-May-01 01:33:33 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2010-May-01 01:33:33 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2010-May-01 01:33:33 START begin_task: Starting task 'selecting calibration port' 2010-May-01 01:33:33 LOG5 begin_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2010-May-01 01:33:33 LOG3 vw_send: To DATATAKING: calport 3 2010-May-01 01:33:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2010-May-01 01:33:33 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-01 01:33:33 START begin_task: Starting task 'waiting on calport' 2010-May-01 01:33:33 LOG5 begin_task: Level: (4) ID = <10463> Status = 0 0 0 0 ok 2010-May-01 01:33:33 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:33:33 LOG4 got_cormsg: From DATATAKING: calport 3 2010-May-01 01:33:33 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-01 01:33:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:33:34 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-01 01:33:34 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2010-May-01 01:33:34 LOG5 end_task: Level: (4) ID = <10463> Status = 0 0 0 0 ok 2010-May-01 01:33:34 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2010-May-01 01:33:34 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2010-May-01 01:33:34 LOG5 end_task: Level: (3) ID = <10462> Status = 0 0 0 0 ok 2010-May-01 01:33:34 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-01 01:33:34 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-01 01:33:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 01:33:34 LOG5 begin_task: Level: (3) ID = <10464> Status = 0 0 0 0 ok 2010-May-01 01:33:34 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:33:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 01:33:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-01 01:33:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 01:33:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 01:33:34 LOG5 end_task: Level: (3) ID = <10464> Status = 0 0 0 0 ok 2010-May-01 01:33:34 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2010-May-01 01:33:34 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2010-May-01 01:33:34 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2010-May-01 01:33:34 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2010-May-01 01:33:34 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2010-May-01 01:33:34 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2010-May-01 01:33:34 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2010-May-01 01:33:34 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2010-May-01 01:33:34 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-May-01 01:33:34 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-May-01 01:33:34 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-May-01 01:33:34 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-May-01 01:33:34 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2010-May-01 01:33:34 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2010-May-01 01:33:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 01:33:34 LOG5 begin_task: Level: (3) ID = <10465> Status = 0 0 0 0 ok 2010-May-01 01:33:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2010-May-01 01:33:34 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 01:33:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2010-May-01 01:33:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-01 01:33:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-May-01 01:33:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 01:33:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 01:33:34 LOG5 end_task: Level: (3) ID = <10465> Status = 0 0 0 0 ok 2010-May-01 01:33:34 LOG3 sock_errsend: To WAPPDATA: FLUSH 2010-May-01 01:33:34 STOP finish_task: Finishing task 'configuring WAPPs' 2010-May-01 01:33:34 LOG5 finish_task: Level: (2) ID = <10461> Status = 0 0 0 0 ok 2010-May-01 01:33:34 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2010-May-01 01:33:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-01 01:33:34 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2010-May-01 01:33:34 LOG5 end_task: Level: (2) ID = <10461> Status = 0 0 0 0 ok 2010-May-01 01:33:34 COMMAND run_command_line: EXECUTING command 8: 'CATALOG galfa_togs.cat' 2010-May-01 01:33:34 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/galfa_togs.cat' 2010-May-01 01:33:34 COMMAND run_command_line: EXECUTING command 9: 'SEEK galfasrc' 2010-May-01 01:33:34 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/galfa_togs.cat galfasrc nooffset wait' 2010-May-01 01:33:34 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2010-May-01 01:33:34 LOG5 begin_task: Level: (2) ID = <10466> Status = 0 0 0 0 ok 2010-May-01 01:33:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2010-May-01 01:33:34 LOG3 track_source: Calling 'track_source galfasrc 180.0 9.7 F 0.0 0.0 main small /share/obs4/usr/a2010/galfa_togs.cat 0 Topocentric velocity(optical)' 2010-May-01 01:33:34 START begin_task: Starting task 'sending tracking commands' 2010-May-01 01:33:34 LOG5 begin_task: Level: (3) ID = <10467> Status = 0 0 0 0 ok 2010-May-01 01:33:34 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2010-May-01 01:33:34 INFO1 track_source: Starting to track galfasrc 2010-May-01 01:33:34 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2010-May-01 01:33:35 LOG3 vw_send: To DATATAKING: set ra 180.0 2010-May-01 01:33:35 LOG3 vw_send: To DATATAKING: set dec 9.7 2010-May-01 01:33:35 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-01 01:33:35 LOG3 vw_send: To DATATAKING: pnt tr 180.0 9.7 -CF 2010-May-01 01:33:35 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-May-01 01:33:35 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-01 01:33:35 LOG5 finish_task: Level: (3) ID = <10467> Status = 0 0 0 0 ok 2010-May-01 01:33:35 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-01 01:33:35 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-01 01:33:35 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-01 01:33:35 LOG5 end_task: Level: (3) ID = <10467> Status = 0 0 0 0 ok 2010-May-01 01:33:35 START begin_task: Starting task 'waiting on telescope' 2010-May-01 01:33:35 LOG5 begin_task: Level: (3) ID = <10468> Status = 0 0 0 0 ok 2010-May-01 01:33:35 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-01 01:33:35 LOG3 waittrk: Start waittrk 5 2010-May-01 01:33:35 START begin_task: Starting task 'waiting on telescope movement' 2010-May-01 01:33:35 LOG5 begin_task: Level: (4) ID = <10469> Status = 0 0 0 0 ok 2010-May-01 01:33:35 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2010-May-01 01:33:35 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2010-May-01 01:33:35 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2010-May-01 01:33:35 LOG4 got_cormsg: From DATATAKING: set dec 9.7 2010-May-01 01:33:35 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2010-May-01 01:33:35 LOG4 got_cormsg: From DATATAKING: vw% 9.7 2010-May-01 01:33:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:33:35 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-01 01:33:35 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 9.7 -CF 2010-May-01 01:33:35 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-May-01 01:33:35 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-01 01:33:35 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:33:40 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-01 01:33:40 LOG5 end_task: Level: (4) ID = <10469> Status = 0 0 0 0 ok 2010-May-01 01:33:40 START begin_task: Starting task 'waiting on telescope on source' 2010-May-01 01:33:40 LOG5 begin_task: Level: (4) ID = <10470> Status = 0 0 0 0 ok 2010-May-01 01:33:42 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-01 01:33:42 LOG5 end_task: Level: (4) ID = <10470> Status = 0 0 0 0 ok 2010-May-01 01:33:42 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-01 01:33:42 INFO2 waittrk: Now tracking galfasrc 2010-May-01 01:33:42 LOG4 waittrk: Current telescope position: Az = 179.74 ZA = 9.73 2010-May-01 01:33:42 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-01 01:33:42 LOG5 finish_task: Level: (3) ID = <10468> Status = 0 0 0 0 ok 2010-May-01 01:33:42 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-01 01:33:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-01 01:33:42 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-01 01:33:42 LOG5 end_task: Level: (3) ID = <10468> Status = 0 0 0 0 ok 2010-May-01 01:33:42 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2010-May-01 01:33:42 LOG5 finish_task: Level: (2) ID = <10466> Status = 0 0 0 0 ok 2010-May-01 01:33:42 DONE finish_task: DONE finished tracking: source 'galfasrc' 2010-May-01 01:33:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-01 01:33:42 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2010-May-01 01:33:42 LOG5 end_task: Level: (2) ID = <10466> Status = 0 0 0 0 ok 2010-May-01 01:33:42 COMMAND run_command_line: EXECUTING command 10: 'TRACKCURPOS' 2010-May-01 01:33:42 BEGIN begin_task: Starting task 'tracking current position' 2010-May-01 01:33:42 LOG5 begin_task: Level: (2) ID = <10471> Status = 0 0 0 0 ok 2010-May-01 01:33:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Current Position} INFO {Tracking current position ...} 2010-May-01 01:33:42 INFO1 track_current_pos: Starting to track the current commanded position RA = 15:42:24.8 and Dec = +28:05:31.1 2010-May-01 01:33:42 LOG3 track_source: Calling 'track_source Cur-pos 154224.8 280531.1 J 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2010-May-01 01:33:42 START begin_task: Starting task 'sending tracking commands' 2010-May-01 01:33:42 LOG5 begin_task: Level: (3) ID = <10472> Status = 0 0 0 0 ok 2010-May-01 01:33:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {Cur-pos} INFO {Slewing to source 'Cur-pos' ...} 2010-May-01 01:33:42 INFO1 track_source: Starting to track Cur-pos 2010-May-01 01:33:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "Cur-pos" 2010-May-01 01:33:42 LOG3 vw_send: To DATATAKING: set ra 154224.8 2010-May-01 01:33:42 LOG3 vw_send: To DATATAKING: set dec 280531.1 2010-May-01 01:33:42 LOG3 vw_send: To DATATAKING: pnt tr send 2010-May-01 01:33:42 LOG3 vw_send: To DATATAKING: pnt tr 154224.8 280531.1 -CJ 2010-May-01 01:33:42 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2010-May-01 01:33:42 STOP finish_task: Finishing task 'sending tracking commands' 2010-May-01 01:33:42 LOG5 finish_task: Level: (3) ID = <10472> Status = 0 0 0 0 ok 2010-May-01 01:33:42 INFO2 finish_task: DONE finished sending: tracking commands 2010-May-01 01:33:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-01 01:33:43 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2010-May-01 01:33:43 LOG5 end_task: Level: (3) ID = <10472> Status = 0 0 0 0 ok 2010-May-01 01:33:43 START begin_task: Starting task 'waiting on telescope' 2010-May-01 01:33:43 LOG5 begin_task: Level: (3) ID = <10473> Status = 0 0 0 0 ok 2010-May-01 01:33:43 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-01 01:33:43 LOG3 waittrk: Start waittrk 5 2010-May-01 01:33:43 START begin_task: Starting task 'waiting on telescope movement' 2010-May-01 01:33:43 LOG5 begin_task: Level: (4) ID = <10474> Status = 0 0 0 0 ok 2010-May-01 01:33:43 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "Cur-pos" 2010-May-01 01:33:43 LOG4 got_cormsg: From DATATAKING: set ra 154224.8 2010-May-01 01:33:43 LOG4 got_cormsg: From DATATAKING: set dec 280531.1 2010-May-01 01:33:43 LOG4 got_cormsg: From DATATAKING: vw% 154224.8 2010-May-01 01:33:43 LOG4 got_cormsg: From DATATAKING: vw% 280531.1 2010-May-01 01:33:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:33:43 LOG4 got_cormsg: From DATATAKING: pnt tr send 2010-May-01 01:33:43 LOG4 got_cormsg: From DATATAKING: pnt tr 154224.8 280531.1 -CJ 2010-May-01 01:33:43 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2010-May-01 01:33:43 LOG4 got_cormsg: From DATATAKING: vw% vw% 2010-May-01 01:33:43 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:33:48 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-01 01:33:48 LOG5 end_task: Level: (4) ID = <10474> Status = 0 0 0 0 ok 2010-May-01 01:33:48 START begin_task: Starting task 'waiting on telescope on source' 2010-May-01 01:33:48 LOG5 begin_task: Level: (4) ID = <10475> Status = 0 0 0 0 ok 2010-May-01 01:33:51 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-01 01:33:51 LOG5 end_task: Level: (4) ID = <10475> Status = 0 0 0 0 ok 2010-May-01 01:33:51 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2010-May-01 01:33:51 INFO2 waittrk: Now tracking Cur-pos 2010-May-01 01:33:51 LOG4 waittrk: Current telescope position: Az = 179.57 ZA = 9.73 2010-May-01 01:33:51 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-01 01:33:51 LOG5 finish_task: Level: (3) ID = <10473> Status = 0 0 0 0 ok 2010-May-01 01:33:51 INFO2 finish_task: DONE finished waiting: telescope on source 2010-May-01 01:33:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-01 01:33:51 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-01 01:33:51 LOG5 end_task: Level: (3) ID = <10473> Status = 0 0 0 0 ok 2010-May-01 01:33:51 STOP finish_task: Finishing task 'tracking current position' 2010-May-01 01:33:51 LOG5 finish_task: Level: (2) ID = <10471> Status = 0 0 0 0 ok 2010-May-01 01:33:51 DONE finish_task: DONE finished tracking: current position 2010-May-01 01:33:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-01 01:33:51 END end_task: Finishing task 'tracking current position' with status 'OK' 2010-May-01 01:33:51 LOG5 end_task: Level: (2) ID = <10471> Status = 0 0 0 0 ok 2010-May-01 01:33:51 COMMAND run_command_line: EXECUTING command 11: 'ALFAANGLE 19.' 2010-May-01 01:33:51 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19. 2010-May-01 01:33:51 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2010-May-01 01:33:51 LOG5 begin_task: Level: (2) ID = <10476> Status = 0 0 0 0 ok 2010-May-01 01:33:51 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2010-May-01 01:33:51 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2010-May-01 01:33:51 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19. REPLY 2010-May-01 01:33:51 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2010-May-01 01:33:51 START begin_task: Starting task 'waiting on ALFA rotation' 2010-May-01 01:33:51 LOG5 begin_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2010-May-01 01:33:52 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2010-May-01 01:33:52 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2010-May-01 01:33:52 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2010-May-01 01:33:52 LOG5 end_task: Level: (3) ID = <10477> Status = 0 0 0 0 ok 2010-May-01 01:33:52 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-01 01:33:52 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2010-May-01 01:33:52 LOG5 finish_task: Level: (2) ID = <10476> Status = 0 0 0 0 ok 2010-May-01 01:33:52 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2010-May-01 01:33:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-01 01:33:52 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2010-May-01 01:33:52 LOG5 end_task: Level: (2) ID = <10476> Status = 0 0 0 0 ok 2010-May-01 01:33:52 COMMAND run_command_line: EXECUTING command 12: 'WAITTRACK' 2010-May-01 01:33:52 BEGIN begin_task: Starting task 'waiting on telescope' 2010-May-01 01:33:52 LOG5 begin_task: Level: (2) ID = <10478> Status = 0 0 0 0 ok 2010-May-01 01:33:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2010-May-01 01:33:52 LOG3 waittrk: Start waittrk 5 2010-May-01 01:33:52 START begin_task: Starting task 'waiting on telescope movement' 2010-May-01 01:33:52 LOG5 begin_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2010-May-01 01:33:57 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2010-May-01 01:33:57 LOG5 end_task: Level: (3) ID = <10479> Status = 0 0 0 0 ok 2010-May-01 01:33:57 START begin_task: Starting task 'waiting on telescope on source' 2010-May-01 01:33:57 LOG5 begin_task: Level: (3) ID = <10480> Status = 0 0 0 0 ok 2010-May-01 01:33:57 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2010-May-01 01:33:57 LOG5 end_task: Level: (3) ID = <10480> Status = 0 0 0 0 ok 2010-May-01 01:33:57 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2010-May-01 01:33:57 INFO2 waittrk: Now tracking Cur-pos 2010-May-01 01:33:57 LOG4 waittrk: Current telescope position: Az = 179.41 ZA = 9.73 2010-May-01 01:33:57 STOP finish_task: Finishing task 'waiting on telescope' 2010-May-01 01:33:57 LOG5 finish_task: Level: (2) ID = <10478> Status = 0 0 0 0 ok 2010-May-01 01:33:57 DONE finish_task: DONE finished waiting: telescope on source 2010-May-01 01:33:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-01 01:33:58 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2010-May-01 01:33:58 LOG5 end_task: Level: (2) ID = <10478> Status = 0 0 0 0 ok 2010-May-01 01:33:58 COMMAND run_command_line: EXECUTING command 16: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-May-01 01:33:58 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2010-May-01 01:33:58 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2010-May-01 01:33:58 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2010-May-01 01:33:58 BEGIN begin_task: Starting task 'smart frequency switching' 2010-May-01 01:33:58 LOG5 begin_task: Level: (2) ID = <10481> Status = 0 0 0 0 ok 2010-May-01 01:33:58 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'Cur-pos' 2010-May-01 01:33:58 INFO1 smartfreq: Starting pattern: Smart frequency switching 2010-May-01 01:33:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2010-May-01 01:33:58 START begin_task: Starting task 'selecting calibration type' 2010-May-01 01:33:58 LOG5 begin_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2010-May-01 01:33:58 LOG3 vw_send: To DATATAKING: setcal hcorcal 2010-May-01 01:33:58 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2010-May-01 01:33:58 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-01 01:33:58 START begin_task: Starting task 'waiting on setcal' 2010-May-01 01:33:58 LOG5 begin_task: Level: (4) ID = <10483> Status = 0 0 0 0 ok 2010-May-01 01:33:58 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2010-May-01 01:33:58 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-01 01:33:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:33:58 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-01 01:33:58 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2010-May-01 01:33:58 LOG5 end_task: Level: (4) ID = <10483> Status = 0 0 0 0 ok 2010-May-01 01:33:58 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2010-May-01 01:33:58 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 01:33:58 LOG3 socket_wait: To ALFAMON: CAL HI 2010-May-01 01:33:58 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 01:33:58 LOG5 begin_task: Level: (4) ID = <10484> Status = 0 0 0 0 ok 2010-May-01 01:33:58 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:33:59 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 01:33:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 01:33:59 LOG5 end_task: Level: (4) ID = <10484> Status = 0 0 0 0 ok 2010-May-01 01:33:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 01:33:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2010-May-01 01:33:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2010-May-01 01:33:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2010-May-01 01:33:59 START begin_task: Starting task 'waiting on command to ALFA' 2010-May-01 01:33:59 LOG5 begin_task: Level: (4) ID = <10485> Status = 0 0 0 0 ok 2010-May-01 01:33:59 LOG4 got_alfamon: From ALFAMON: ACK 2010-May-01 01:33:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2010-May-01 01:33:59 LOG5 end_task: Level: (4) ID = <10485> Status = 0 0 0 0 ok 2010-May-01 01:33:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2010-May-01 01:33:59 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2010-May-01 01:33:59 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2010-May-01 01:33:59 LOG5 end_task: Level: (3) ID = <10482> Status = 0 0 0 0 ok 2010-May-01 01:33:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2010-May-01 01:33:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2010-May-01 01:33:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2010-May-01 01:33:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2010-May-01 01:33:59 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2010-May-01 01:33:59 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2010-May-01 01:33:59 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-May-01 01:33:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-01 01:33:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-01 01:33:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 01:33:59 LOG5 begin_task: Level: (3) ID = <10486> Status = 0 0 0 0 ok 2010-May-01 01:33:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2010-May-01 01:33:59 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 01:33:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-01 01:33:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 01:33:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 01:33:59 LOG5 end_task: Level: (3) ID = <10486> Status = 0 0 0 0 ok 2010-May-01 01:33:59 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-May-01 01:33:59 START begin_task: Starting task 'adjusting WAPP power' 2010-May-01 01:33:59 LOG5 begin_task: Level: (3) ID = <10487> Status = 0 0 0 0 ok 2010-May-01 01:33:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2010-May-01 01:33:59 INFO2 adjust_power: Starting to adjust WAPP power 2010-May-01 01:33:59 LOG3 vw_send: To DATATAKING: adjpwrif2 2010-May-01 01:33:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2010-May-01 01:33:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2010-May-01 01:33:59 START begin_task: Starting task 'waiting on adjpwrif2' 2010-May-01 01:33:59 LOG5 begin_task: Level: (4) ID = <10488> Status = 0 0 0 0 ok 2010-May-01 01:33:59 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2010-May-01 01:33:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2010-May-01 01:33:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20100501.a2010.0010.fits 2010-May-01 01:33:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20100501.a2010.0010.fits} 2010-May-01 01:34:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:34:02 LOG4 got_cormsg: From DATATAKING: DONE 2010-May-01 01:34:02 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2010-May-01 01:34:02 LOG5 end_task: Level: (4) ID = <10488> Status = 0 0 0 0 ok 2010-May-01 01:34:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2010-May-01 01:34:02 START begin_task: Starting task 'adjusting WAPP power' 2010-May-01 01:34:02 LOG5 begin_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2010-May-01 01:34:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2010-May-01 01:34:02 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2010-May-01 01:34:02 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2010-May-01 01:34:02 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2010-May-01 01:34:02 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2010-May-01 01:34:02 START begin_task: Starting task 'waiting on adjust WAPP power' 2010-May-01 01:34:02 LOG5 begin_task: Level: (5) ID = <10490> Status = 0 0 0 0 ok 2010-May-01 01:34:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2010-May-01 01:34:02 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:34:03 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 8 6 dB --- beam 1: 6 6 dB 2010-May-01 01:34:03 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 5 dB 2010-May-01 01:34:03 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 3 4 dB --- beam 3: 4 3 dB 2010-May-01 01:34:03 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2010-May-01 01:34:03 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2010-May-01 01:34:03 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2010-May-01 01:34:03 LOG5 end_task: Level: (5) ID = <10490> Status = 0 0 0 0 ok 2010-May-01 01:34:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 0.914 0.966 ALFA beam 1: 1.019 1.051 2010-May-01 01:34:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.953 0.933 ALFA beam 3: 0.878 1.008 2010-May-01 01:34:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.099 0.888 ALFA beam 5: 1.131 0.998 2010-May-01 01:34:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.940 0.899 ALFA beam 7: 1.016 1.047 2010-May-01 01:34:03 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-01 01:34:03 LOG5 finish_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2010-May-01 01:34:03 INFO3 finish_task: DONE finished adjusting: WAPP power 2010-May-01 01:34:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-01 01:34:03 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-01 01:34:03 LOG5 end_task: Level: (4) ID = <10489> Status = 0 0 0 0 ok 2010-May-01 01:34:03 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2010-May-01 01:34:03 STOP finish_task: Finishing task 'adjusting WAPP power' 2010-May-01 01:34:03 LOG5 finish_task: Level: (3) ID = <10487> Status = 0 0 0 0 ok 2010-May-01 01:34:03 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2010-May-01 01:34:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2010-May-01 01:34:03 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2010-May-01 01:34:03 LOG5 end_task: Level: (3) ID = <10487> Status = 0 0 0 0 ok 2010-May-01 01:34:03 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-May-01 01:34:03 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-May-01 01:34:03 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-May-01 01:34:03 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:34:03 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33146 J 2010-May-01 01:34:03 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:34:03 LOG2 antvel: Parameters to Doppler: Topocentric 20042 2010 121 0.0 2010-May-01 01:34:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:34:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-May-01 01:34:03 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-May-01 01:34:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:34:03 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:34:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-May-01 01:34:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:34:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-May-01 01:34:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:34:03 LOG5 begin_task: Level: (3) ID = <10491> Status = 0 0 0 0 ok 2010-May-01 01:34:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-May-01 01:34:03 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.719953 2010.3314587294344 18.999933 2010-May-01 01:34:03 LOG4 log_alfabeam: ALFABEAM 0 15.706888888889168 28.091972222222214 2010-May-01 01:34:03 LOG4 log_alfabeam: ALFABEAM 1 15.708253157903115 27.987384838443745 2010-May-01 01:34:03 LOG4 log_alfabeam: ALFABEAM 2 15.713415180636353 28.057502708580252 2010-May-01 01:34:03 LOG4 log_alfabeam: ALFABEAM 3 15.712101345486316 28.162225807507760 2010-May-01 01:34:03 LOG4 log_alfabeam: ALFABEAM 4 15.705493786239348 28.196522555107688 2010-May-01 01:34:03 LOG4 log_alfabeam: ALFABEAM 5 15.700312604142951 28.125604786443414 2010-May-01 01:34:03 LOG4 log_alfabeam: ALFABEAM 6 15.701757962701020 28.021197101563313 2010-May-01 01:34:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100021 2010-May-01 01:34:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:34:04 LOG5 begin_task: Level: (4) ID = <10492> Status = 0 0 0 0 ok 2010-May-01 01:34:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:34:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-May-01 01:34:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:34:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:34:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:34:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-May-01 01:34:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20045.00 2010-May-01 01:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:34:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:34:15 LOG5 end_task: Level: (4) ID = <10492> Status = 0 0 0 0 ok 2010-May-01 01:34:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:34:15 LOG5 end_task: Level: (3) ID = <10491> Status = 0 0 0 0 ok 2010-May-01 01:34:15 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-May-01 01:34:15 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-May-01 01:34:15 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-May-01 01:34:15 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:34:15 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33146 J 2010-May-01 01:34:15 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:34:15 LOG2 antvel: Parameters to Doppler: Topocentric 20055 2010 121 0.0 2010-May-01 01:34:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:34:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-May-01 01:34:15 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-May-01 01:34:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:34:15 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:34:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-May-01 01:34:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:34:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-May-01 01:34:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:34:15 LOG5 begin_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2010-May-01 01:34:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-May-01 01:34:15 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.723574 2010.3314591413796 18.999933 2010-May-01 01:34:15 LOG4 log_alfabeam: ALFABEAM 0 15.706888888889033 28.091972222222214 2010-May-01 01:34:15 LOG4 log_alfabeam: ALFABEAM 1 15.708295275213358 27.987482665368312 2010-May-01 01:34:15 LOG4 log_alfabeam: ALFABEAM 2 15.713428998945217 28.057964077095800 2010-May-01 01:34:15 LOG4 log_alfabeam: ALFABEAM 3 15.712072928665751 28.162592899424286 2010-May-01 01:34:15 LOG4 log_alfabeam: ALFABEAM 4 15.705451605132899 28.196422550595134 2010-May-01 01:34:15 LOG4 log_alfabeam: ALFABEAM 5 15.700299146370810 28.125139944489568 2010-May-01 01:34:15 LOG4 log_alfabeam: ALFABEAM 6 15.701786564319907 28.020835800784983 2010-May-01 01:34:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100022 2010-May-01 01:34:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:34:16 LOG5 begin_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2010-May-01 01:34:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:34:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-May-01 01:34:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:34:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:34:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:34:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-May-01 01:34:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20057.00 2010-May-01 01:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:34:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:34:27 LOG5 end_task: Level: (4) ID = <10494> Status = 0 0 0 0 ok 2010-May-01 01:34:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:34:27 LOG5 end_task: Level: (3) ID = <10493> Status = 0 0 0 0 ok 2010-May-01 01:34:27 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-May-01 01:34:27 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-May-01 01:34:27 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-May-01 01:34:27 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:34:27 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33146 J 2010-May-01 01:34:27 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:34:27 LOG2 antvel: Parameters to Doppler: Topocentric 20067 2010 121 0.0 2010-May-01 01:34:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:34:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-May-01 01:34:27 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-May-01 01:34:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:34:27 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:34:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-May-01 01:34:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:34:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-May-01 01:34:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:34:27 LOG5 begin_task: Level: (3) ID = <10495> Status = 0 0 0 0 ok 2010-May-01 01:34:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-May-01 01:34:27 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.726916 2010.3314595216368 18.999933 2010-May-01 01:34:27 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888965 28.091972222222211 2010-May-01 01:34:27 LOG4 log_alfabeam: ALFABEAM 1 15.708334107345367 27.987575581221666 2010-May-01 01:34:27 LOG4 log_alfabeam: ALFABEAM 2 15.713441586376831 28.058390712138969 2010-May-01 01:34:27 LOG4 log_alfabeam: ALFABEAM 3 15.712046572561420 28.162929884332300 2010-May-01 01:34:27 LOG4 log_alfabeam: ALFABEAM 4 15.705412715787855 28.196327622231344 2010-May-01 01:34:27 LOG4 log_alfabeam: ALFABEAM 5 15.700286894265023 28.124710145273028 2010-May-01 01:34:27 LOG4 log_alfabeam: ALFABEAM 6 15.701813086576548 28.020504182491823 2010-May-01 01:34:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100023 2010-May-01 01:34:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:34:28 LOG5 begin_task: Level: (4) ID = <10496> Status = 0 0 0 0 ok 2010-May-01 01:34:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:34:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-May-01 01:34:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:34:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:34:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:34:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-May-01 01:34:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20069.00 2010-May-01 01:34:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:34:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:34:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:34:39 LOG5 end_task: Level: (4) ID = <10496> Status = 0 0 0 0 ok 2010-May-01 01:34:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:34:39 LOG5 end_task: Level: (3) ID = <10495> Status = 0 0 0 0 ok 2010-May-01 01:34:39 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-May-01 01:34:39 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-May-01 01:34:39 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-May-01 01:34:39 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:34:39 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33146 J 2010-May-01 01:34:39 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:34:39 LOG2 antvel: Parameters to Doppler: Topocentric 20079 2010 121 0.0 2010-May-01 01:34:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:34:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-May-01 01:34:39 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-May-01 01:34:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:34:39 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:34:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-May-01 01:34:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:34:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-May-01 01:34:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:34:39 LOG5 begin_task: Level: (3) ID = <10497> Status = 0 0 0 0 ok 2010-May-01 01:34:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-May-01 01:34:39 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.730259 2010.3314599018938 18.999933 2010-May-01 01:34:39 LOG4 log_alfabeam: ALFABEAM 0 15.706888888889061 28.091972222222225 2010-May-01 01:34:39 LOG4 log_alfabeam: ALFABEAM 1 15.708372909990487 27.987671039821024 2010-May-01 01:34:39 LOG4 log_alfabeam: ALFABEAM 2 15.713454017179524 28.058818227918991 2010-May-01 01:34:39 LOG4 log_alfabeam: ALFABEAM 3 15.712020086736414 28.163265197139825 2010-May-01 01:34:39 LOG4 log_alfabeam: ALFABEAM 4 15.705373857519859 28.196230148203380 2010-May-01 01:34:39 LOG4 log_alfabeam: ALFABEAM 5 15.700274801308073 28.124279504782809 2010-May-01 01:34:39 LOG4 log_alfabeam: ALFABEAM 6 15.701839734346661 28.020174257970076 2010-May-01 01:34:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100024 2010-May-01 01:34:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:34:40 LOG5 begin_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2010-May-01 01:34:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:34:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-May-01 01:34:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:34:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:34:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:34:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-May-01 01:34:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20081.00 2010-May-01 01:34:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:34:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:34:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:34:51 LOG5 end_task: Level: (4) ID = <10498> Status = 0 0 0 0 ok 2010-May-01 01:34:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:34:51 LOG5 end_task: Level: (3) ID = <10497> Status = 0 0 0 0 ok 2010-May-01 01:34:51 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-May-01 01:34:51 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-May-01 01:34:51 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-May-01 01:34:51 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:34:51 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33146 J 2010-May-01 01:34:51 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:34:51 LOG2 antvel: Parameters to Doppler: Topocentric 20091 2010 121 0.0 2010-May-01 01:34:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:34:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-May-01 01:34:51 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-May-01 01:34:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:34:51 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:34:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-May-01 01:34:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:34:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-May-01 01:34:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:34:51 LOG5 begin_task: Level: (3) ID = <10499> Status = 0 0 0 0 ok 2010-May-01 01:34:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-May-01 01:34:51 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.733601 2010.3314602821508 18.999933 2010-May-01 01:34:51 LOG4 log_alfabeam: ALFABEAM 0 15.706888888889075 28.091972222222211 2010-May-01 01:34:51 LOG4 log_alfabeam: ALFABEAM 1 15.708411657343065 27.987768976269045 2010-May-01 01:34:51 LOG4 log_alfabeam: ALFABEAM 2 15.713466283156594 28.059246339518889 2010-May-01 01:34:51 LOG4 log_alfabeam: ALFABEAM 3 15.711993488885486 28.163598615441444 2010-May-01 01:34:51 LOG4 log_alfabeam: ALFABEAM 4 15.705335056175223 28.196130194890504 2010-May-01 01:34:51 LOG4 log_alfabeam: ALFABEAM 5 15.700262875446629 28.123848310207965 2010-May-01 01:34:51 LOG4 log_alfabeam: ALFABEAM 6 15.701866489819107 28.019846245655110 2010-May-01 01:34:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100025 2010-May-01 01:34:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:34:52 LOG5 begin_task: Level: (4) ID = <10500> Status = 0 0 0 0 ok 2010-May-01 01:34:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:34:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-May-01 01:34:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:34:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:34:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:34:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-May-01 01:34:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20093.00 2010-May-01 01:34:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:34:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:34:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:35:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:35:03 LOG5 end_task: Level: (4) ID = <10500> Status = 0 0 0 0 ok 2010-May-01 01:35:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:35:03 LOG5 end_task: Level: (3) ID = <10499> Status = 0 0 0 0 ok 2010-May-01 01:35:03 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-May-01 01:35:03 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-May-01 01:35:03 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-May-01 01:35:03 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:35:03 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33146 J 2010-May-01 01:35:03 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:35:03 LOG2 antvel: Parameters to Doppler: Topocentric 20103 2010 121 0.0 2010-May-01 01:35:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:35:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-May-01 01:35:03 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-May-01 01:35:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:35:03 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:35:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-May-01 01:35:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:35:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-May-01 01:35:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:35:03 LOG5 begin_task: Level: (3) ID = <10501> Status = 0 0 0 0 ok 2010-May-01 01:35:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-May-01 01:35:03 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.736944 2010.3314606624078 18.999933 2010-May-01 01:35:03 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888876 28.091972222222214 2010-May-01 01:35:03 LOG4 log_alfabeam: ALFABEAM 1 15.708450370008814 27.987869440895921 2010-May-01 01:35:03 LOG4 log_alfabeam: ALFABEAM 2 15.713478390921145 28.059675273854452 2010-May-01 01:35:03 LOG4 log_alfabeam: ALFABEAM 3 15.711966764964043 28.163930317328770 2010-May-01 01:35:03 LOG4 log_alfabeam: ALFABEAM 4 15.705296291122325 28.196027711032134 2010-May-01 01:35:03 LOG4 log_alfabeam: ALFABEAM 5 15.700251110223247 28.123416333179250 2010-May-01 01:35:03 LOG4 log_alfabeam: ALFABEAM 6 15.701893367114534 28.019519969939278 2010-May-01 01:35:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100026 2010-May-01 01:35:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:35:04 LOG5 begin_task: Level: (4) ID = <10502> Status = 0 0 0 0 ok 2010-May-01 01:35:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:35:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-May-01 01:35:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:35:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:35:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:35:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-May-01 01:35:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20105.00 2010-May-01 01:35:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:35:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:35:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:35:15 LOG5 end_task: Level: (4) ID = <10502> Status = 0 0 0 0 ok 2010-May-01 01:35:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:35:15 LOG5 end_task: Level: (3) ID = <10501> Status = 0 0 0 0 ok 2010-May-01 01:35:15 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-May-01 01:35:15 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-May-01 01:35:15 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-May-01 01:35:15 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:35:15 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33146 J 2010-May-01 01:35:15 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:35:15 LOG2 antvel: Parameters to Doppler: Topocentric 20115 2010 121 0.0 2010-May-01 01:35:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:35:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-May-01 01:35:15 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-May-01 01:35:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:35:15 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:35:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-May-01 01:35:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:35:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-May-01 01:35:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:35:15 LOG5 begin_task: Level: (3) ID = <10503> Status = 0 0 0 0 ok 2010-May-01 01:35:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-May-01 01:35:15 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.740286 2010.3314610426648 18.999933 2010-May-01 01:35:15 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888965 28.091972222222218 2010-May-01 01:35:15 LOG4 log_alfabeam: ALFABEAM 1 15.708489022257123 27.987972364836459 2010-May-01 01:35:15 LOG4 log_alfabeam: ALFABEAM 2 15.713490332535034 28.060104744921571 2010-May-01 01:35:15 LOG4 log_alfabeam: ALFABEAM 3 15.711939932854232 28.164260083298267 2010-May-01 01:35:15 LOG4 log_alfabeam: ALFABEAM 4 15.705257588129525 28.195922766978203 2010-May-01 01:35:15 LOG4 log_alfabeam: ALFABEAM 5 15.700239513322941 28.122983861900927 2010-May-01 01:35:15 LOG4 log_alfabeam: ALFABEAM 6 15.701920348242680 28.019195646324707 2010-May-01 01:35:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100027 2010-May-01 01:35:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:35:16 LOG5 begin_task: Level: (4) ID = <10504> Status = 0 0 0 0 ok 2010-May-01 01:35:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:35:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-May-01 01:35:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:35:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:35:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:35:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-May-01 01:35:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20117.00 2010-May-01 01:35:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:35:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:35:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:35:27 LOG5 end_task: Level: (4) ID = <10504> Status = 0 0 0 0 ok 2010-May-01 01:35:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:35:27 LOG5 end_task: Level: (3) ID = <10503> Status = 0 0 0 0 ok 2010-May-01 01:35:27 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-May-01 01:35:27 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-01 01:35:27 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-01 01:35:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 01:35:27 LOG5 begin_task: Level: (3) ID = <10505> Status = 0 0 0 0 ok 2010-May-01 01:35:27 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 01:35:27 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-01 01:35:27 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 01:35:27 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 01:35:27 LOG5 end_task: Level: (3) ID = <10505> Status = 0 0 0 0 ok 2010-May-01 01:35:27 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-May-01 01:35:27 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-May-01 01:35:27 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-May-01 01:35:27 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:35:27 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33146 J 2010-May-01 01:35:27 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:35:27 LOG2 antvel: Parameters to Doppler: Topocentric 20127 2010 121 0.0 2010-May-01 01:35:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:35:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-May-01 01:35:27 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-May-01 01:35:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:35:27 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:35:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-May-01 01:35:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:35:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-May-01 01:35:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:35:27 LOG5 begin_task: Level: (3) ID = <10506> Status = 0 0 0 0 ok 2010-May-01 01:35:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-May-01 01:35:27 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.743629 2010.3314614229221 18.999933 2010-May-01 01:35:27 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888949 28.091972222222211 2010-May-01 01:35:27 LOG4 log_alfabeam: ALFABEAM 1 15.708527634659971 27.988077800439264 2010-May-01 01:35:27 LOG4 log_alfabeam: ALFABEAM 2 15.713502114481335 28.060534980230997 2010-May-01 01:35:27 LOG4 log_alfabeam: ALFABEAM 3 15.711912978413791 28.164588090011073 2010-May-01 01:35:27 LOG4 log_alfabeam: ALFABEAM 4 15.705218926600057 28.195815309448015 2010-May-01 01:35:27 LOG4 log_alfabeam: ALFABEAM 5 15.700228078418899 28.122550667435046 2010-May-01 01:35:27 LOG4 log_alfabeam: ALFABEAM 6 15.701947447418119 28.018873100647802 2010-May-01 01:35:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100028 2010-May-01 01:35:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:35:28 LOG5 begin_task: Level: (4) ID = <10507> Status = 0 0 0 0 ok 2010-May-01 01:35:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:35:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-May-01 01:35:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:35:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:35:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:35:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-May-01 01:35:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20129.00 2010-May-01 01:35:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:35:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:35:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:35:39 LOG5 end_task: Level: (4) ID = <10507> Status = 0 0 0 0 ok 2010-May-01 01:35:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:35:39 LOG5 end_task: Level: (3) ID = <10506> Status = 0 0 0 0 ok 2010-May-01 01:35:39 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-May-01 01:35:39 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-May-01 01:35:39 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-May-01 01:35:39 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:35:39 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33146 J 2010-May-01 01:35:39 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:35:39 LOG2 antvel: Parameters to Doppler: Topocentric 20139 2010 121 0.0 2010-May-01 01:35:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:35:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-May-01 01:35:39 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-May-01 01:35:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:35:39 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:35:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-May-01 01:35:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:35:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-May-01 01:35:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:35:39 LOG5 begin_task: Level: (3) ID = <10508> Status = 0 0 0 0 ok 2010-May-01 01:35:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-May-01 01:35:39 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.746971 2010.3314618031791 18.999933 2010-May-01 01:35:39 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888903 28.091972222222218 2010-May-01 01:35:39 LOG4 log_alfabeam: ALFABEAM 1 15.708566181571467 27.988185674906749 2010-May-01 01:35:39 LOG4 log_alfabeam: ALFABEAM 2 15.713513729082244 28.060965692802057 2010-May-01 01:35:39 LOG4 log_alfabeam: ALFABEAM 3 15.711885919704093 28.164914120942374 2010-May-01 01:35:39 LOG4 log_alfabeam: ALFABEAM 4 15.705180332214132 28.195705412725513 2010-May-01 01:35:39 LOG4 log_alfabeam: ALFABEAM 5 15.700216812932128 28.122117038889073 2010-May-01 01:35:39 LOG4 log_alfabeam: ALFABEAM 6 15.701974646478178 28.018552545403750 2010-May-01 01:35:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100029 2010-May-01 01:35:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:35:40 LOG5 begin_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2010-May-01 01:35:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-May-01 01:35:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:35:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:35:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:35:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:35:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-May-01 01:35:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20141.00 2010-May-01 01:35:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:35:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:35:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:35:51 LOG5 end_task: Level: (4) ID = <10509> Status = 0 0 0 0 ok 2010-May-01 01:35:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:35:51 LOG5 end_task: Level: (3) ID = <10508> Status = 0 0 0 0 ok 2010-May-01 01:35:51 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-May-01 01:35:51 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-May-01 01:35:51 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-May-01 01:35:51 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:35:51 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33146 J 2010-May-01 01:35:51 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:35:51 LOG2 antvel: Parameters to Doppler: Topocentric 20151 2010 121 0.0 2010-May-01 01:35:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:35:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-May-01 01:35:51 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-May-01 01:35:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:35:51 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:35:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-May-01 01:35:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:35:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-May-01 01:35:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:35:51 LOG5 begin_task: Level: (3) ID = <10510> Status = 0 0 0 0 ok 2010-May-01 01:35:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-May-01 01:35:51 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.750314 2010.3314621834361 18.999933 2010-May-01 01:35:51 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888994 28.091972222222211 2010-May-01 01:35:51 LOG4 log_alfabeam: ALFABEAM 1 15.708604683527149 27.988296042599252 2010-May-01 01:35:51 LOG4 log_alfabeam: ALFABEAM 2 15.713525182691312 28.061397110710189 2010-May-01 01:35:51 LOG4 log_alfabeam: ALFABEAM 3 15.711858742488383 28.165238351298896 2010-May-01 01:35:51 LOG4 log_alfabeam: ALFABEAM 4 15.705141784412781 28.195593021516665 2010-May-01 01:35:51 LOG4 log_alfabeam: ALFABEAM 5 15.700205710667500 28.121682746786991 2010-May-01 01:35:51 LOG4 log_alfabeam: ALFABEAM 6 15.702001959730273 28.018233807896660 2010-May-01 01:35:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100030 2010-May-01 01:35:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:35:52 LOG5 begin_task: Level: (4) ID = <10511> Status = 0 0 0 0 ok 2010-May-01 01:35:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:35:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-May-01 01:35:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:35:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:35:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:35:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-May-01 01:35:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20153.00 2010-May-01 01:35:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:35:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:35:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:36:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:36:03 LOG5 end_task: Level: (4) ID = <10511> Status = 0 0 0 0 ok 2010-May-01 01:36:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:36:03 LOG5 end_task: Level: (3) ID = <10510> Status = 0 0 0 0 ok 2010-May-01 01:36:03 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-May-01 01:36:03 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-May-01 01:36:03 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-May-01 01:36:03 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:36:03 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33146 J 2010-May-01 01:36:03 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:36:03 LOG2 antvel: Parameters to Doppler: Topocentric 20163 2010 121 0.0 2010-May-01 01:36:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:36:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-May-01 01:36:03 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-May-01 01:36:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:36:03 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:36:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-May-01 01:36:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:36:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-May-01 01:36:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:36:03 LOG5 begin_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2010-May-01 01:36:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-May-01 01:36:03 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.753656 2010.3314625636931 18.999933 2010-May-01 01:36:03 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888944 28.091972222222200 2010-May-01 01:36:03 LOG4 log_alfabeam: ALFABEAM 1 15.708643114975199 27.988408826826571 2010-May-01 01:36:03 LOG4 log_alfabeam: ALFABEAM 2 15.713536467892135 28.061828946109209 2010-May-01 01:36:03 LOG4 log_alfabeam: ALFABEAM 3 15.711831464999843 28.165560567607670 2010-May-01 01:36:03 LOG4 log_alfabeam: ALFABEAM 4 15.705103308779044 28.195478213998491 2010-May-01 01:36:03 LOG4 log_alfabeam: ALFABEAM 5 15.700194778780018 28.121248081026895 2010-May-01 01:36:03 LOG4 log_alfabeam: ALFABEAM 6 15.702029368846867 28.017917097544800 2010-May-01 01:36:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100031 2010-May-01 01:36:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:36:04 LOG5 begin_task: Level: (4) ID = <10513> Status = 0 0 0 0 ok 2010-May-01 01:36:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:36:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-May-01 01:36:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:36:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:36:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:36:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-May-01 01:36:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20165.00 2010-May-01 01:36:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:36:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:36:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:36:15 LOG5 end_task: Level: (4) ID = <10513> Status = 0 0 0 0 ok 2010-May-01 01:36:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:36:15 LOG5 end_task: Level: (3) ID = <10512> Status = 0 0 0 0 ok 2010-May-01 01:36:15 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-May-01 01:36:15 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-May-01 01:36:15 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-May-01 01:36:15 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:36:15 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33146 J 2010-May-01 01:36:15 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:36:15 LOG2 antvel: Parameters to Doppler: Topocentric 20175 2010 121 0.0 2010-May-01 01:36:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:36:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-May-01 01:36:15 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-May-01 01:36:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:36:15 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:36:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-May-01 01:36:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:36:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-May-01 01:36:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:36:15 LOG5 begin_task: Level: (3) ID = <10514> Status = 0 0 0 0 ok 2010-May-01 01:36:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-May-01 01:36:15 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.756999 2010.3314629439501 18.999933 2010-May-01 01:36:15 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888876 28.091972222222214 2010-May-01 01:36:15 LOG4 log_alfabeam: ALFABEAM 1 15.708681496412005 27.988524083954132 2010-May-01 01:36:15 LOG4 log_alfabeam: ALFABEAM 2 15.713547590907812 28.062261427608941 2010-May-01 01:36:15 LOG4 log_alfabeam: ALFABEAM 3 15.711804072908279 28.165880943597138 2010-May-01 01:36:15 LOG4 log_alfabeam: ALFABEAM 4 15.705064884794236 28.195360932870663 2010-May-01 01:36:15 LOG4 log_alfabeam: ALFABEAM 5 15.700184011207122 28.120812811625452 2010-May-01 01:36:15 LOG4 log_alfabeam: ALFABEAM 6 15.702056888225920 28.017602243143472 2010-May-01 01:36:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100032 2010-May-01 01:36:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:36:16 LOG5 begin_task: Level: (4) ID = <10515> Status = 0 0 0 0 ok 2010-May-01 01:36:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:36:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-May-01 01:36:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:36:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:36:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:36:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-May-01 01:36:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20177.00 2010-May-01 01:36:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:36:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:36:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:36:27 LOG5 end_task: Level: (4) ID = <10515> Status = 0 0 0 0 ok 2010-May-01 01:36:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:36:27 LOG5 end_task: Level: (3) ID = <10514> Status = 0 0 0 0 ok 2010-May-01 01:36:27 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-May-01 01:36:27 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-May-01 01:36:27 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-May-01 01:36:27 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:36:27 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33146 J 2010-May-01 01:36:27 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:36:27 LOG2 antvel: Parameters to Doppler: Topocentric 20187 2010 121 0.0 2010-May-01 01:36:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:36:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-May-01 01:36:27 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-May-01 01:36:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:36:27 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:36:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-May-01 01:36:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:36:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-May-01 01:36:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:36:27 LOG5 begin_task: Level: (3) ID = <10516> Status = 0 0 0 0 ok 2010-May-01 01:36:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-May-01 01:36:27 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.760341 2010.3314633242073 18.999933 2010-May-01 01:36:27 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888932 28.091972222222211 2010-May-01 01:36:27 LOG4 log_alfabeam: ALFABEAM 1 15.708719802389689 27.988641733443089 2010-May-01 01:36:27 LOG4 log_alfabeam: ALFABEAM 2 15.713558544586537 28.062694266609469 2010-May-01 01:36:27 LOG4 log_alfabeam: ALFABEAM 3 15.711776584612116 28.166199268915509 2010-May-01 01:36:27 LOG4 log_alfabeam: ALFABEAM 4 15.705026537935415 28.195241260158003 2010-May-01 01:36:27 LOG4 log_alfabeam: ALFABEAM 5 15.700173414836625 28.120377229158326 2010-May-01 01:36:27 LOG4 log_alfabeam: ALFABEAM 6 15.702084499383208 28.017289450967926 2010-May-01 01:36:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100033 2010-May-01 01:36:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:36:28 LOG5 begin_task: Level: (4) ID = <10517> Status = 0 0 0 0 ok 2010-May-01 01:36:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:36:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-May-01 01:36:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:36:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:36:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:36:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-May-01 01:36:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20189.00 2010-May-01 01:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:36:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:36:39 LOG5 end_task: Level: (4) ID = <10517> Status = 0 0 0 0 ok 2010-May-01 01:36:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:36:39 LOG5 end_task: Level: (3) ID = <10516> Status = 0 0 0 0 ok 2010-May-01 01:36:39 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-May-01 01:36:39 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-May-01 01:36:39 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-May-01 01:36:39 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:36:39 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33146 J 2010-May-01 01:36:39 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:36:39 LOG2 antvel: Parameters to Doppler: Topocentric 20199 2010 121 0.0 2010-May-01 01:36:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:36:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-May-01 01:36:39 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-May-01 01:36:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:36:39 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:36:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-May-01 01:36:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:36:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-May-01 01:36:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:36:39 LOG5 begin_task: Level: (3) ID = <10518> Status = 0 0 0 0 ok 2010-May-01 01:36:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-May-01 01:36:39 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.763684 2010.3314637044643 18.999933 2010-May-01 01:36:39 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888926 28.091972222222214 2010-May-01 01:36:39 LOG4 log_alfabeam: ALFABEAM 1 15.708758053361839 27.988761833656774 2010-May-01 01:36:39 LOG4 log_alfabeam: ALFABEAM 2 15.713569335018789 28.063127692224228 2010-May-01 01:36:39 LOG4 log_alfabeam: ALFABEAM 3 15.711748985689139 28.166515715789053 2010-May-01 01:36:39 LOG4 log_alfabeam: ALFABEAM 4 15.704988247726627 28.195119136561075 2010-May-01 01:36:39 LOG4 log_alfabeam: ALFABEAM 5 15.700162983739087 28.119941103165832 2010-May-01 01:36:39 LOG4 log_alfabeam: ALFABEAM 6 15.702112216804993 28.016978551328041 2010-May-01 01:36:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100034 2010-May-01 01:36:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:36:40 LOG5 begin_task: Level: (4) ID = <10519> Status = 0 0 0 0 ok 2010-May-01 01:36:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:36:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-May-01 01:36:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:36:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:36:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:36:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-May-01 01:36:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20201.00 2010-May-01 01:36:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:36:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:36:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:36:51 LOG5 end_task: Level: (4) ID = <10519> Status = 0 0 0 0 ok 2010-May-01 01:36:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:36:51 LOG5 end_task: Level: (3) ID = <10518> Status = 0 0 0 0 ok 2010-May-01 01:36:51 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2010-May-01 01:36:51 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2010-May-01 01:36:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2010-May-01 01:36:51 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-01 01:36:51 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-01 01:36:51 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 01:36:51 LOG5 begin_task: Level: (3) ID = <10520> Status = 0 0 0 0 ok 2010-May-01 01:36:51 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 01:36:51 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-01 01:36:51 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 01:36:51 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 01:36:51 LOG5 end_task: Level: (3) ID = <10520> Status = 0 0 0 0 ok 2010-May-01 01:36:51 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2010-May-01 01:36:51 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2010-May-01 01:36:51 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-May-01 01:36:51 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-May-01 01:36:51 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:36:51 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33146 J 2010-May-01 01:36:51 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:36:51 LOG2 antvel: Parameters to Doppler: Topocentric 20211 2010 121 0.0 2010-May-01 01:36:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:36:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-May-01 01:36:51 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-May-01 01:36:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:36:51 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:36:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-May-01 01:36:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:36:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2010-May-01 01:36:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:36:51 LOG5 begin_task: Level: (3) ID = <10521> Status = 0 0 0 0 ok 2010-May-01 01:36:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2010-May-01 01:36:51 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.767026 2010.3314640847213 18.999933 2010-May-01 01:36:51 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888976 28.091972222222218 2010-May-01 01:36:51 LOG4 log_alfabeam: ALFABEAM 1 15.708796223993637 27.988884300256132 2010-May-01 01:36:51 LOG4 log_alfabeam: ALFABEAM 2 15.713579955318629 28.063561415211833 2010-May-01 01:36:51 LOG4 log_alfabeam: ALFABEAM 3 15.711721294694831 28.166830077052783 2010-May-01 01:36:51 LOG4 log_alfabeam: ALFABEAM 4 15.704950039529299 28.194994647903162 2010-May-01 01:36:51 LOG4 log_alfabeam: ALFABEAM 5 15.700152724533469 28.119504724787795 2010-May-01 01:36:51 LOG4 log_alfabeam: ALFABEAM 6 15.702140021857634 28.016669747293715 2010-May-01 01:36:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100035 2010-May-01 01:36:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:36:52 LOG5 begin_task: Level: (4) ID = <10522> Status = 0 0 0 0 ok 2010-May-01 01:36:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:36:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-May-01 01:36:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:36:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:36:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:36:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2010-May-01 01:36:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20213.00 2010-May-01 01:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:36:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:37:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:37:03 LOG5 end_task: Level: (4) ID = <10522> Status = 0 0 0 0 ok 2010-May-01 01:37:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:37:03 LOG5 end_task: Level: (3) ID = <10521> Status = 0 0 0 0 ok 2010-May-01 01:37:03 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2010-May-01 01:37:03 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-May-01 01:37:03 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-May-01 01:37:03 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:37:03 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33146 J 2010-May-01 01:37:03 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:37:03 LOG2 antvel: Parameters to Doppler: Topocentric 20223 2010 121 0.0 2010-May-01 01:37:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:37:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-May-01 01:37:03 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-May-01 01:37:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:37:03 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:37:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-May-01 01:37:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:37:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2010-May-01 01:37:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:37:03 LOG5 begin_task: Level: (3) ID = <10523> Status = 0 0 0 0 ok 2010-May-01 01:37:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2010-May-01 01:37:03 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.770368 2010.3314644649784 18.999933 2010-May-01 01:37:03 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888910 28.091972222222228 2010-May-01 01:37:03 LOG4 log_alfabeam: ALFABEAM 1 15.708834323304755 27.989009155879195 2010-May-01 01:37:03 LOG4 log_alfabeam: ALFABEAM 2 15.713590408341398 28.063995535203663 2010-May-01 01:37:03 LOG4 log_alfabeam: ALFABEAM 3 15.711693505447245 28.167142430246084 2010-May-01 01:37:03 LOG4 log_alfabeam: ALFABEAM 4 15.704911904313315 28.194867771213541 2010-May-01 01:37:03 LOG4 log_alfabeam: ALFABEAM 5 15.700142634418592 28.119067993848837 2010-May-01 01:37:03 LOG4 log_alfabeam: ALFABEAM 6 15.702167920752382 28.016362962205957 2010-May-01 01:37:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100036 2010-May-01 01:37:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:37:04 LOG5 begin_task: Level: (4) ID = <10524> Status = 0 0 0 0 ok 2010-May-01 01:37:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:37:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-May-01 01:37:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:37:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:37:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:37:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2010-May-01 01:37:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20225.00 2010-May-01 01:37:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:37:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:37:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:37:15 LOG5 end_task: Level: (4) ID = <10524> Status = 0 0 0 0 ok 2010-May-01 01:37:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:37:15 LOG5 end_task: Level: (3) ID = <10523> Status = 0 0 0 0 ok 2010-May-01 01:37:15 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2010-May-01 01:37:15 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-May-01 01:37:15 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-May-01 01:37:15 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:37:15 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33146 J 2010-May-01 01:37:15 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:37:15 LOG2 antvel: Parameters to Doppler: Topocentric 20235 2010 121 0.0 2010-May-01 01:37:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:37:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-May-01 01:37:15 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-May-01 01:37:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:37:15 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:37:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-May-01 01:37:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:37:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2010-May-01 01:37:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:37:15 LOG5 begin_task: Level: (3) ID = <10525> Status = 0 0 0 0 ok 2010-May-01 01:37:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2010-May-01 01:37:15 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.773711 2010.3314648452354 18.999933 2010-May-01 01:37:15 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888958 28.091972222222218 2010-May-01 01:37:15 LOG4 log_alfabeam: ALFABEAM 1 15.708872360249273 27.989136425586253 2010-May-01 01:37:15 LOG4 log_alfabeam: ALFABEAM 2 15.713600696775842 28.064430152293177 2010-May-01 01:37:15 LOG4 log_alfabeam: ALFABEAM 3 15.711665611661987 28.167452850934563 2010-May-01 01:37:15 LOG4 log_alfabeam: ALFABEAM 4 15.704873833116373 28.194738481099549 2010-May-01 01:37:15 LOG4 log_alfabeam: ALFABEAM 5 15.700132710761999 28.118630809751821 2010-May-01 01:37:15 LOG4 log_alfabeam: ALFABEAM 6 15.702195919799452 28.016058121391797 2010-May-01 01:37:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100037 2010-May-01 01:37:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:37:16 LOG5 begin_task: Level: (4) ID = <10526> Status = 0 0 0 0 ok 2010-May-01 01:37:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:37:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-May-01 01:37:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:37:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:37:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:37:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2010-May-01 01:37:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20237.00 2010-May-01 01:37:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:37:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:37:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:37:27 LOG5 end_task: Level: (4) ID = <10526> Status = 0 0 0 0 ok 2010-May-01 01:37:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:37:27 LOG5 end_task: Level: (3) ID = <10525> Status = 0 0 0 0 ok 2010-May-01 01:37:27 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2010-May-01 01:37:27 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-May-01 01:37:27 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-May-01 01:37:27 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:37:27 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33147 J 2010-May-01 01:37:27 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:37:27 LOG2 antvel: Parameters to Doppler: Topocentric 20247 2010 121 0.0 2010-May-01 01:37:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:37:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-May-01 01:37:27 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-May-01 01:37:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:37:27 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:37:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-May-01 01:37:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:37:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2010-May-01 01:37:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:37:27 LOG5 begin_task: Level: (3) ID = <10527> Status = 0 0 0 0 ok 2010-May-01 01:37:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2010-May-01 01:37:27 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.777053 2010.3314652254926 18.999933 2010-May-01 01:37:27 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888882 28.091972222222218 2010-May-01 01:37:27 LOG4 log_alfabeam: ALFABEAM 1 15.708910309677472 27.989266019437355 2010-May-01 01:37:27 LOG4 log_alfabeam: ALFABEAM 2 15.713610814136361 28.064864976487396 2010-May-01 01:37:27 LOG4 log_alfabeam: ALFABEAM 3 15.711637632115059 28.167761136847414 2010-May-01 01:37:27 LOG4 log_alfabeam: ALFABEAM 4 15.704835851109824 28.194606868980451 2010-May-01 01:37:27 LOG4 log_alfabeam: ALFABEAM 5 15.700122959777573 28.118193464270583 2010-May-01 01:37:27 LOG4 log_alfabeam: ALFABEAM 6 15.702224000155832 28.015755423005412 2010-May-01 01:37:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100038 2010-May-01 01:37:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:37:28 LOG5 begin_task: Level: (4) ID = <10528> Status = 0 0 0 0 ok 2010-May-01 01:37:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:37:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-May-01 01:37:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:37:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:37:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:37:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2010-May-01 01:37:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20249.00 2010-May-01 01:37:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:37:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:37:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:37:39 LOG5 end_task: Level: (4) ID = <10528> Status = 0 0 0 0 ok 2010-May-01 01:37:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:37:39 LOG5 end_task: Level: (3) ID = <10527> Status = 0 0 0 0 ok 2010-May-01 01:37:39 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2010-May-01 01:37:39 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-May-01 01:37:39 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-May-01 01:37:39 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:37:39 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33147 J 2010-May-01 01:37:39 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:37:39 LOG2 antvel: Parameters to Doppler: Topocentric 20259 2010 121 0.0 2010-May-01 01:37:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:37:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-May-01 01:37:39 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-May-01 01:37:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:37:39 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:37:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-May-01 01:37:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:37:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2010-May-01 01:37:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:37:39 LOG5 begin_task: Level: (3) ID = <10529> Status = 0 0 0 0 ok 2010-May-01 01:37:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2010-May-01 01:37:39 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.780396 2010.3314656057496 18.999933 2010-May-01 01:37:39 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888898 28.091972222222218 2010-May-01 01:37:39 LOG4 log_alfabeam: ALFABEAM 1 15.708948191926055 27.989398000757564 2010-May-01 01:37:39 LOG4 log_alfabeam: ALFABEAM 2 15.713620766180396 28.065300238022662 2010-May-01 01:37:39 LOG4 log_alfabeam: ALFABEAM 3 15.711609552164331 28.168067456350990 2010-May-01 01:37:39 LOG4 log_alfabeam: ALFABEAM 4 15.704797937938027 28.194472870592822 2010-May-01 01:37:39 LOG4 log_alfabeam: ALFABEAM 5 15.700113375873299 28.117755725892071 2010-May-01 01:37:39 LOG4 log_alfabeam: ALFABEAM 6 15.702252176521018 28.015454701245485 2010-May-01 01:37:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100039 2010-May-01 01:37:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:37:40 LOG5 begin_task: Level: (4) ID = <10530> Status = 0 0 0 0 ok 2010-May-01 01:37:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:37:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-May-01 01:37:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:37:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:37:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:37:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2010-May-01 01:37:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20261.00 2010-May-01 01:37:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:37:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:37:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:37:51 LOG5 end_task: Level: (4) ID = <10530> Status = 0 0 0 0 ok 2010-May-01 01:37:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:37:51 LOG5 end_task: Level: (3) ID = <10529> Status = 0 0 0 0 ok 2010-May-01 01:37:51 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2010-May-01 01:37:51 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-May-01 01:37:51 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-May-01 01:37:51 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:37:51 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33147 J 2010-May-01 01:37:51 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:37:51 LOG2 antvel: Parameters to Doppler: Topocentric 20271 2010 121 0.0 2010-May-01 01:37:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:37:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-May-01 01:37:51 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-May-01 01:37:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:37:51 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:37:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-May-01 01:37:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:37:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2010-May-01 01:37:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:37:51 LOG5 begin_task: Level: (3) ID = <10531> Status = 0 0 0 0 ok 2010-May-01 01:37:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2010-May-01 01:37:51 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.783738 2010.3314659860066 18.999933 2010-May-01 01:37:51 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888965 28.091972222222228 2010-May-01 01:37:51 LOG4 log_alfabeam: ALFABEAM 1 15.708985981979993 27.989532275944637 2010-May-01 01:37:51 LOG4 log_alfabeam: ALFABEAM 2 15.713630546690576 28.065735646544795 2010-May-01 01:37:51 LOG4 log_alfabeam: ALFABEAM 3 15.711581390723147 28.168371610507503 2010-May-01 01:37:51 LOG4 log_alfabeam: ALFABEAM 4 15.704760118634907 28.194336581013602 2010-May-01 01:37:51 LOG4 log_alfabeam: ALFABEAM 5 15.700103964992595 28.117317886671618 2010-May-01 01:37:51 LOG4 log_alfabeam: ALFABEAM 6 15.702280429922615 28.015156150922753 2010-May-01 01:37:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100040 2010-May-01 01:37:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:37:52 LOG5 begin_task: Level: (4) ID = <10532> Status = 0 0 0 0 ok 2010-May-01 01:37:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:37:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-May-01 01:37:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:37:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:37:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:37:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2010-May-01 01:37:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20273.00 2010-May-01 01:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:37:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:38:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:38:03 LOG5 end_task: Level: (4) ID = <10532> Status = 0 0 0 0 ok 2010-May-01 01:38:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:38:03 LOG5 end_task: Level: (3) ID = <10531> Status = 0 0 0 0 ok 2010-May-01 01:38:03 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2010-May-01 01:38:03 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-May-01 01:38:03 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-May-01 01:38:03 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:38:03 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33147 J 2010-May-01 01:38:03 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:38:03 LOG2 antvel: Parameters to Doppler: Topocentric 20283 2010 121 0.0 2010-May-01 01:38:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:38:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-May-01 01:38:03 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-May-01 01:38:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:38:03 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:38:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-May-01 01:38:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:38:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2010-May-01 01:38:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:38:03 LOG5 begin_task: Level: (3) ID = <10533> Status = 0 0 0 0 ok 2010-May-01 01:38:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2010-May-01 01:38:03 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.787081 2010.3314663662636 18.999933 2010-May-01 01:38:03 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888900 28.091972222222211 2010-May-01 01:38:03 LOG4 log_alfabeam: ALFABEAM 1 15.709023700124032 27.989668910294391 2010-May-01 01:38:03 LOG4 log_alfabeam: ALFABEAM 2 15.713640161289355 28.066171432684296 2010-May-01 01:38:03 LOG4 log_alfabeam: ALFABEAM 3 15.711553133064568 28.168673766097626 2010-May-01 01:38:03 LOG4 log_alfabeam: ALFABEAM 4 15.704722372897509 28.194197934007946 2010-May-01 01:38:03 LOG4 log_alfabeam: ALFABEAM 5 15.700094721679285 28.116879714730516 2010-May-01 01:38:03 LOG4 log_alfabeam: ALFABEAM 6 15.702308775141487 28.014859607832268 2010-May-01 01:38:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100041 2010-May-01 01:38:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:38:04 LOG5 begin_task: Level: (4) ID = <10534> Status = 0 0 0 0 ok 2010-May-01 01:38:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:38:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-May-01 01:38:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:38:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:38:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:38:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2010-May-01 01:38:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20285.00 2010-May-01 01:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:38:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:38:15 LOG5 end_task: Level: (4) ID = <10534> Status = 0 0 0 0 ok 2010-May-01 01:38:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:38:15 LOG5 end_task: Level: (3) ID = <10533> Status = 0 0 0 0 ok 2010-May-01 01:38:15 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2010-May-01 01:38:15 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2010-May-01 01:38:15 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2010-May-01 01:38:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 01:38:15 LOG5 begin_task: Level: (3) ID = <10535> Status = 0 0 0 0 ok 2010-May-01 01:38:15 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 01:38:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2010-May-01 01:38:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 01:38:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 01:38:15 LOG5 end_task: Level: (3) ID = <10535> Status = 0 0 0 0 ok 2010-May-01 01:38:15 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2010-May-01 01:38:15 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-May-01 01:38:15 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2010-May-01 01:38:15 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:38:15 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33147 J 2010-May-01 01:38:15 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:38:15 LOG2 antvel: Parameters to Doppler: Topocentric 20295 2010 121 0.0 2010-May-01 01:38:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:38:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2010-May-01 01:38:15 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2010-May-01 01:38:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:38:15 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:38:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2010-May-01 01:38:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:38:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2010-May-01 01:38:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:38:15 LOG5 begin_task: Level: (3) ID = <10536> Status = 0 0 0 0 ok 2010-May-01 01:38:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2010-May-01 01:38:15 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.790423 2010.3314667465206 18.999933 2010-May-01 01:38:15 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888884 28.091972222222214 2010-May-01 01:38:15 LOG4 log_alfabeam: ALFABEAM 1 15.709061321486301 27.989807806604009 2010-May-01 01:38:15 LOG4 log_alfabeam: ALFABEAM 2 15.713649604027843 28.066607305837433 2010-May-01 01:38:15 LOG4 log_alfabeam: ALFABEAM 3 15.711524798231036 28.168973727567984 2010-May-01 01:38:15 LOG4 log_alfabeam: ALFABEAM 4 15.704684725614042 28.194057028247702 2010-May-01 01:38:15 LOG4 log_alfabeam: ALFABEAM 5 15.700085651606157 28.116441502293416 2010-May-01 01:38:15 LOG4 log_alfabeam: ALFABEAM 6 15.702337193084009 28.014565263393312 2010-May-01 01:38:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100042 2010-May-01 01:38:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:38:16 LOG5 begin_task: Level: (4) ID = <10537> Status = 0 0 0 0 ok 2010-May-01 01:38:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:38:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2010-May-01 01:38:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:38:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:38:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:38:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2010-May-01 01:38:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20297.00 2010-May-01 01:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:38:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:38:27 LOG5 end_task: Level: (4) ID = <10537> Status = 0 0 0 0 ok 2010-May-01 01:38:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:38:27 LOG5 end_task: Level: (3) ID = <10536> Status = 0 0 0 0 ok 2010-May-01 01:38:27 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2010-May-01 01:38:27 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-May-01 01:38:27 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2010-May-01 01:38:27 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:38:27 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33147 J 2010-May-01 01:38:27 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:38:27 LOG2 antvel: Parameters to Doppler: Topocentric 20307 2010 121 0.0 2010-May-01 01:38:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:38:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2010-May-01 01:38:27 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2010-May-01 01:38:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:38:27 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:38:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2010-May-01 01:38:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:38:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2010-May-01 01:38:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:38:27 LOG5 begin_task: Level: (3) ID = <10538> Status = 0 0 0 0 ok 2010-May-01 01:38:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2010-May-01 01:38:27 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.793766 2010.3314671267779 18.999933 2010-May-01 01:38:27 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888951 28.091972222222218 2010-May-01 01:38:27 LOG4 log_alfabeam: ALFABEAM 1 15.709098866296960 27.989949032131594 2010-May-01 01:38:27 LOG4 log_alfabeam: ALFABEAM 2 15.713658880393186 28.067043496996849 2010-May-01 01:38:27 LOG4 log_alfabeam: ALFABEAM 3 15.711496371413364 28.169271660089816 2010-May-01 01:38:27 LOG4 log_alfabeam: ALFABEAM 4 15.704647156537625 28.193913795535519 2010-May-01 01:38:27 LOG4 log_alfabeam: ALFABEAM 5 15.700076749454407 28.116003017148397 2010-May-01 01:38:27 LOG4 log_alfabeam: ALFABEAM 6 15.702365698610953 28.014272955020729 2010-May-01 01:38:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100043 2010-May-01 01:38:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:38:28 LOG5 begin_task: Level: (4) ID = <10539> Status = 0 0 0 0 ok 2010-May-01 01:38:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:38:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2010-May-01 01:38:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:38:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:38:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:38:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2010-May-01 01:38:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20309.00 2010-May-01 01:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:38:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:38:39 LOG5 end_task: Level: (4) ID = <10539> Status = 0 0 0 0 ok 2010-May-01 01:38:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:38:39 LOG5 end_task: Level: (3) ID = <10538> Status = 0 0 0 0 ok 2010-May-01 01:38:39 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2010-May-01 01:38:39 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-May-01 01:38:39 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2010-May-01 01:38:39 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:38:39 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33147 J 2010-May-01 01:38:39 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:38:39 LOG2 antvel: Parameters to Doppler: Topocentric 20319 2010 121 0.0 2010-May-01 01:38:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:38:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2010-May-01 01:38:39 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2010-May-01 01:38:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:38:39 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:38:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2010-May-01 01:38:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:38:39 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2010-May-01 01:38:39 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:38:39 LOG5 begin_task: Level: (3) ID = <10540> Status = 0 0 0 0 ok 2010-May-01 01:38:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2010-May-01 01:38:39 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.797108 2010.3314675070349 18.999933 2010-May-01 01:38:39 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888923 28.091972222222211 2010-May-01 01:38:39 LOG4 log_alfabeam: ALFABEAM 1 15.709136309835110 27.990092486138867 2010-May-01 01:38:39 LOG4 log_alfabeam: ALFABEAM 2 15.713667984704761 28.067479715420120 2010-May-01 01:38:39 LOG4 log_alfabeam: ALFABEAM 3 15.711467871774556 28.169567371541063 2010-May-01 01:38:39 LOG4 log_alfabeam: ALFABEAM 4 15.704609690401897 28.193768338071653 2010-May-01 01:38:39 LOG4 log_alfabeam: ALFABEAM 5 15.700068020625684 28.115564551577741 2010-May-01 01:38:39 LOG4 log_alfabeam: ALFABEAM 6 15.702394272515104 28.013982870698385 2010-May-01 01:38:39 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100044 2010-May-01 01:38:40 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:38:40 LOG5 begin_task: Level: (4) ID = <10541> Status = 0 0 0 0 ok 2010-May-01 01:38:40 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:38:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2010-May-01 01:38:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:38:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:38:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:38:40 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2010-May-01 01:38:40 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20321.00 2010-May-01 01:38:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:38:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:42 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:51 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:38:51 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:38:51 LOG5 end_task: Level: (4) ID = <10541> Status = 0 0 0 0 ok 2010-May-01 01:38:51 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:38:51 LOG5 end_task: Level: (3) ID = <10540> Status = 0 0 0 0 ok 2010-May-01 01:38:51 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2010-May-01 01:38:51 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-May-01 01:38:51 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2010-May-01 01:38:51 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:38:51 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33147 J 2010-May-01 01:38:51 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:38:51 LOG2 antvel: Parameters to Doppler: Topocentric 20331 2010 121 0.0 2010-May-01 01:38:51 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:38:51 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2010-May-01 01:38:51 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2010-May-01 01:38:51 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:38:51 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:38:51 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2010-May-01 01:38:51 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:38:51 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2010-May-01 01:38:51 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:38:51 LOG5 begin_task: Level: (3) ID = <10542> Status = 0 0 0 0 ok 2010-May-01 01:38:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2010-May-01 01:38:51 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.800451 2010.3314678872919 18.999933 2010-May-01 01:38:51 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888910 28.091972222222211 2010-May-01 01:38:51 LOG4 log_alfabeam: ALFABEAM 1 15.709173672273439 27.990238237837218 2010-May-01 01:38:51 LOG4 log_alfabeam: ALFABEAM 2 15.713676922313256 28.067916192429692 2010-May-01 01:38:51 LOG4 log_alfabeam: ALFABEAM 3 15.711439284424971 28.169861025459927 2010-May-01 01:38:51 LOG4 log_alfabeam: ALFABEAM 4 15.704572307018793 28.193620585705343 2010-May-01 01:38:51 LOG4 log_alfabeam: ALFABEAM 5 15.700059459939149 28.115125873069008 2010-May-01 01:38:51 LOG4 log_alfabeam: ALFABEAM 6 15.702422929734823 28.013694849484001 2010-May-01 01:38:51 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100045 2010-May-01 01:38:52 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:38:52 LOG5 begin_task: Level: (4) ID = <10543> Status = 0 0 0 0 ok 2010-May-01 01:38:52 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:38:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2010-May-01 01:38:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:38:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:38:52 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:38:52 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2010-May-01 01:38:52 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20333.00 2010-May-01 01:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:38:54 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:39:03 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:39:03 LOG5 end_task: Level: (4) ID = <10543> Status = 0 0 0 0 ok 2010-May-01 01:39:03 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:39:03 LOG5 end_task: Level: (3) ID = <10542> Status = 0 0 0 0 ok 2010-May-01 01:39:03 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2010-May-01 01:39:03 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-May-01 01:39:03 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2010-May-01 01:39:03 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:39:03 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33147 J 2010-May-01 01:39:03 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:39:03 LOG2 antvel: Parameters to Doppler: Topocentric 20343 2010 121 0.0 2010-May-01 01:39:03 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:39:03 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2010-May-01 01:39:03 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2010-May-01 01:39:03 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:39:03 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:39:03 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2010-May-01 01:39:03 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:39:03 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2010-May-01 01:39:03 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:39:03 LOG5 begin_task: Level: (3) ID = <10544> Status = 0 0 0 0 ok 2010-May-01 01:39:03 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2010-May-01 01:39:03 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.803793 2010.3314682675489 18.999933 2010-May-01 01:39:03 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888908 28.091972222222211 2010-May-01 01:39:03 LOG4 log_alfabeam: ALFABEAM 1 15.709210929050288 27.990386183021549 2010-May-01 01:39:03 LOG4 log_alfabeam: ALFABEAM 2 15.713685687806780 28.068352637254581 2010-May-01 01:39:03 LOG4 log_alfabeam: ALFABEAM 3 15.711410628640259 28.170152433198531 2010-May-01 01:39:03 LOG4 log_alfabeam: ALFABEAM 4 15.704535030960042 28.193470644095918 2010-May-01 01:39:03 LOG4 log_alfabeam: ALFABEAM 5 15.700051072526136 28.114687273851857 2010-May-01 01:39:03 LOG4 log_alfabeam: ALFABEAM 6 15.702451650957995 28.013409075886596 2010-May-01 01:39:03 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100046 2010-May-01 01:39:04 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:39:04 LOG5 begin_task: Level: (4) ID = <10545> Status = 0 0 0 0 ok 2010-May-01 01:39:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:39:04 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2010-May-01 01:39:04 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:39:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:39:04 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:39:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2010-May-01 01:39:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20345.00 2010-May-01 01:39:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:39:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:15 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:39:15 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:39:15 LOG5 end_task: Level: (4) ID = <10545> Status = 0 0 0 0 ok 2010-May-01 01:39:15 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:39:15 LOG5 end_task: Level: (3) ID = <10544> Status = 0 0 0 0 ok 2010-May-01 01:39:15 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2010-May-01 01:39:15 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-May-01 01:39:15 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2010-May-01 01:39:15 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:39:15 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33147 J 2010-May-01 01:39:15 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:39:15 LOG2 antvel: Parameters to Doppler: Topocentric 20355 2010 121 0.0 2010-May-01 01:39:15 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:39:15 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2010-May-01 01:39:15 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2010-May-01 01:39:15 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:39:15 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:39:15 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2010-May-01 01:39:15 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:39:15 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2010-May-01 01:39:15 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:39:15 LOG5 begin_task: Level: (3) ID = <10546> Status = 0 0 0 0 ok 2010-May-01 01:39:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2010-May-01 01:39:15 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.807135 2010.3314686478061 18.999933 2010-May-01 01:39:15 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888898 28.091972222222214 2010-May-01 01:39:15 LOG4 log_alfabeam: ALFABEAM 1 15.709248089173414 27.990536347584076 2010-May-01 01:39:15 LOG4 log_alfabeam: ALFABEAM 2 15.713694283851856 28.068789150892403 2010-May-01 01:39:15 LOG4 log_alfabeam: ALFABEAM 3 15.711381898060152 28.170441670418246 2010-May-01 01:39:15 LOG4 log_alfabeam: ALFABEAM 4 15.704497853208535 28.193318487007332 2010-May-01 01:39:15 LOG4 log_alfabeam: ALFABEAM 5 15.700042855777507 28.114248652391858 2010-May-01 01:39:15 LOG4 log_alfabeam: ALFABEAM 6 15.702480442572968 28.013125475163051 2010-May-01 01:39:15 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100047 2010-May-01 01:39:16 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:39:16 LOG5 begin_task: Level: (4) ID = <10547> Status = 0 0 0 0 ok 2010-May-01 01:39:16 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:39:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2010-May-01 01:39:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:39:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:39:16 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:39:16 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2010-May-01 01:39:16 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20357.00 2010-May-01 01:39:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:39:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:18 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:39:27 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:39:27 LOG5 end_task: Level: (4) ID = <10547> Status = 0 0 0 0 ok 2010-May-01 01:39:27 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:39:27 LOG5 end_task: Level: (3) ID = <10546> Status = 0 0 0 0 ok 2010-May-01 01:39:27 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2010-May-01 01:39:27 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-May-01 01:39:27 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2010-May-01 01:39:27 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:39:27 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33147 J 2010-May-01 01:39:27 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:39:27 LOG2 antvel: Parameters to Doppler: Topocentric 20367 2010 121 0.0 2010-May-01 01:39:27 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:39:27 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2010-May-01 01:39:27 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2010-May-01 01:39:27 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:39:27 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:39:27 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2010-May-01 01:39:27 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:39:27 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2010-May-01 01:39:27 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2010-May-01 01:39:27 LOG5 begin_task: Level: (3) ID = <10548> Status = 0 0 0 0 ok 2010-May-01 01:39:27 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2010-May-01 01:39:27 LOG5 log_alfabeam: Parameters: 15.706888888888885 28.091972222222214 15.810478 2010.3314690280631 18.999933 2010-May-01 01:39:27 LOG4 log_alfabeam: ALFABEAM 0 15.706888888888932 28.091972222222218 2010-May-01 01:39:27 LOG4 log_alfabeam: ALFABEAM 1 15.709285161561443 27.990688759713311 2010-May-01 01:39:27 LOG4 log_alfabeam: ALFABEAM 2 15.713702712944968 28.069225834518107 2010-May-01 01:39:27 LOG4 log_alfabeam: ALFABEAM 3 15.711353086241285 28.170728810644203 2010-May-01 01:39:27 LOG4 log_alfabeam: ALFABEAM 4 15.704460764837956 28.193164085909572 2010-May-01 01:39:27 LOG4 log_alfabeam: ALFABEAM 5 15.700034807255737 28.113809907020023 2010-May-01 01:39:27 LOG4 log_alfabeam: ALFABEAM 6 15.702509311047143 28.012843974712275 2010-May-01 01:39:27 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 12100048 2010-May-01 01:39:28 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2010-May-01 01:39:28 LOG5 begin_task: Level: (4) ID = <10549> Status = 0 0 0 0 ok 2010-May-01 01:39:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2010-May-01 01:39:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2010-May-01 01:39:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:39:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:39:28 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:39:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2010-May-01 01:39:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 20369.00 2010-May-01 01:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2010-May-01 01:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1075.000000 MHz 2010-May-01 01:39:39 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2010-May-01 01:39:39 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2010-May-01 01:39:39 LOG5 end_task: Level: (4) ID = <10549> Status = 0 0 0 0 ok 2010-May-01 01:39:39 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2010-May-01 01:39:39 LOG5 end_task: Level: (3) ID = <10548> Status = 0 0 0 0 ok 2010-May-01 01:39:39 INFO2 smartfreq: Switching off CAL 2010-May-01 01:39:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2010-May-01 01:39:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2010-May-01 01:39:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2010-May-01 01:39:39 LOG5 begin_task: Level: (3) ID = <10550> Status = 0 0 0 0 ok 2010-May-01 01:39:39 LOG3 CALCONTROL-caltrig: Software trigger 2010-May-01 01:39:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2010-May-01 01:39:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2010-May-01 01:39:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2010-May-01 01:39:39 LOG5 end_task: Level: (3) ID = <10550> Status = 0 0 0 0 ok 2010-May-01 01:39:39 INFO3 restore_frequencies: Restoring original frequencies 2010-May-01 01:39:39 LOG5 antvel: Calling 'antvel 154224.800000 280531.100000 J Topocentric 0' 2010-May-01 01:39:39 LOG2 antvel: Precessing RA = 15:42:24.8 Dec = +28:05:31.1 Epoch = 2010.33147 J 2010-May-01 01:39:39 LOG2 antvel: Computed apparent RA = 15:42:52.7 Dec = +28:03:21.4 2010-May-01 01:39:39 LOG2 antvel: Parameters to Doppler: Topocentric 20379 2010 121 0.0 2010-May-01 01:39:39 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2010-May-01 01:39:39 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2010-May-01 01:39:39 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2010-May-01 01:39:39 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2010-May-01 01:39:39 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2010-May-01 01:39:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2010-May-01 01:39:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:39:39 STOP finish_task: Finishing task 'smart frequency switching' 2010-May-01 01:39:39 LOG5 finish_task: Level: (2) ID = <10481> Status = 0 0 0 0 ok 2010-May-01 01:39:39 DONE finish_task: DONE finished pattern: smart frequency switching 2010-May-01 01:39:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-01 01:39:39 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2010-May-01 01:39:39 LOG5 end_task: Level: (2) ID = <10481> Status = 0 0 0 0 ok 2010-May-01 01:39:39 NOTE run_command_file: DONE with command file processing 2010-May-01 01:39:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2010-May-01 01:39:39 STOP finish_task: Finishing task 'running command file 'command_galfasrc_mar10.cmd'' 2010-May-01 01:39:39 LOG5 finish_task: Level: (1) ID = <10457> Status = 0 0 0 0 ok 2010-May-01 01:39:39 DONE finish_task: DONE finished running: command file 'command_galfasrc_mar10.cmd' 2010-May-01 01:39:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2010-May-01 01:39:40 END end_task: Finishing task 'running command file 'command_galfasrc_mar10.cmd'' with status 'OK' 2010-May-01 01:39:40 LOG5 end_task: Level: (1) ID = <10457> Status = 0 0 0 0 ok 2010-May-01 01:39:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2010-May-01 01:39:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2010-May-01 01:39:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:39:40 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:39:47 ALERT CIMA-exit_cima: Exiting CIMA ... 2010-May-01 01:39:47 COMMAND CIMA-send_to_exec: Sending command to move interim correlator data 2010-May-01 01:39:47 LOG4 exec_msg: From OBSERVER: vw_send {mvdata a2010} 2010-May-01 01:39:47 LOG3 vw_send: To DATATAKING: mvdata a2010 2010-May-01 01:39:47 COMMAND CIMA-send_to_exec: Sending command to clear telescope offsets 2010-May-01 01:39:47 LOG4 exec_msg: From OBSERVER: vw_send {pnt c setoff 0 0} 2010-May-01 01:39:47 LOG3 vw_send: To DATATAKING: pnt c setoff 0 0 2010-May-01 01:39:47 NOTE CIMA-exit_cima: Cleaning up session ... 2010-May-01 01:39:47 LOG4 got_cormsg: From DATATAKING: mvdata a2010 2010-May-01 01:39:47 LOG4 got_cormsg: From DATATAKING: pnt c setoff 0 0 2010-May-01 01:39:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:39:48 LOG4 got_cormsg: From DATATAKING: vw% 2010-May-01 01:39:49 LOG3 exec_msg: Closing socket