2009-Apr-30 18:33:24 BEGIN executive: CIMA executive starting ... 2009-Apr-30 18:33:25 NOTE executive: STARTING NEW CIMA SESSION 2009-Apr-30 18:33:25 INFO1 executive: Using CIMA version 3.1.04 'smart' from 2009-04-21 11:22 2009-Apr-30 18:33:25 INFO4 executive: This is an ON-LINE session 2009-Apr-30 18:33:25 INFO4 executive: This is a REMOTE session 2009-Apr-30 18:33:25 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Apr-30 18:33:25 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Becky Koopmann' 2009-Apr-30 18:33:25 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090430' 2009-Apr-30 18:33:26 LOG2 log_preferences: Currently applied preferences: 2009-Apr-30 18:33:26 LOG2 log_preferences: prefs(dailylog) = daily 2009-Apr-30 18:33:26 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Apr-30 18:33:26 LOG2 log_preferences: prefs(datawindow) = open 2009-Apr-30 18:33:26 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Apr-30 18:33:26 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Apr-30 18:33:26 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Apr-30 18:33:26 LOG2 log_preferences: prefs(logcolours) = full 2009-Apr-30 18:33:26 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Apr-30 18:33:26 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Apr-30 18:33:26 LOG2 log_preferences: prefs(displayformat) = long 2009-Apr-30 18:33:26 LOG2 log_preferences: prefs(logformat) = new 2009-Apr-30 18:33:26 LOG2 log_preferences: prefs(fontsize) = 3 2009-Apr-30 18:33:26 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-30 18:33:26 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-30 18:33:26 ALERT executive: CIMA executive ready 2009-Apr-30 18:33:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:33:29 LOG4 got_cormsg: From DATATAKING: setup 2009-Apr-30 18:33:29 NOTE frontend: CIMA frontend ready 2009-Apr-30 18:33:36 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Apr-30 18:33:36 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Apr-30 18:33:36 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Apr-30 18:33:36 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Apr-30 18:33:36 LOG4 got_cormsg: From DATATAKING: 2009-Apr-30 18:33:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:33:36 LOG4 got_cormsg: From DATATAKING: tape stat 2009-Apr-30 18:33:36 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Apr-30 18:33:36 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Apr-30 18:33:36 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Apr-30 18:33:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Apr-30 18:33:36 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Apr-30 18:33:37 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Apr-30 18:33:37 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Apr-30 18:33:37 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Apr-30 18:33:37 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Apr-30 18:33:37 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Apr-30 18:33:37 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-30 18:33:37 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-30 18:33:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:33:37 LOG4 got_cormsg: From DATATAKING: 2009-Apr-30 18:33:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:33:51 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Apr-30 18:33:52 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Apr-30 18:33:52 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Apr-30 18:33:52 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-30 18:33:52 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-30 18:33:52 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-30 18:33:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-30 18:33:52 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-30 18:33:52 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-30 18:33:52 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-30 18:33:52 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-30 18:33:52 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-30 18:33:52 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Apr-30 18:33:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-30 18:33:52 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-30 18:33:52 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-30 18:33:52 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-30 18:33:52 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-30 18:33:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:33:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:34:01 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-30 18:34:01 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-30 18:34:01 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-30 18:34:01 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-30 18:34:01 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-30 18:34:01 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-30 18:34:01 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-30 18:34:01 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-30 18:34:01 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-30 18:34:01 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-30 18:34:05 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-30 18:34:05 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-30 18:34:05 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-30 18:34:05 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-30 18:35:03 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Apr-30 18:35:13 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Apr-30 18:35:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Apr-30 18:35:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Apr-30 18:35:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Apr-30 18:35:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Apr-30 18:35:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Apr-30 18:35:13 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Apr-30 18:35:13 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-30 18:35:13 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Apr-30 18:35:13 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Apr-30 18:35:13 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-30 18:35:13 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-30 18:35:13 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Apr-30 18:35:13 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Apr-30 18:35:13 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Apr-30 18:35:13 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-30 18:35:13 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-30 18:35:13 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Apr-30 18:35:13 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-30 18:35:14 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-30 18:35:15 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-30 18:35:15 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-30 18:35:15 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-30 18:35:15 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-30 18:35:15 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-30 18:35:15 INFO1 config_iflo: Selecting receiver ALFA 2009-Apr-30 18:35:15 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Apr-30 18:35:15 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Apr-30 18:35:15 START begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-30 18:35:15 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-30 18:35:15 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-30 18:35:15 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-30 18:35:15 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-30 18:35:15 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-30 18:35:15 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-30 18:35:15 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-30 18:35:15 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-30 18:35:15 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Apr-30 18:35:15 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-30 18:35:15 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-30 18:35:15 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-30 18:35:15 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Apr-30 18:35:15 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-30 18:35:15 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Apr-30 18:35:15 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-30 18:35:15 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Apr-30 18:35:16 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Apr-30 18:35:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-30 18:35:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-30 18:35:16 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-30 18:35:16 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-30 18:35:16 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-30 18:35:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-30 18:35:16 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-30 18:35:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-30 18:35:16 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Apr-30 18:35:16 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-30 18:35:16 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Apr-30 18:35:16 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-30 18:35:16 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-30 18:35:16 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-30 18:35:16 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-30 18:35:16 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-30 18:35:16 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Apr-30 18:35:16 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-30 18:35:16 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Apr-30 18:35:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-30 18:35:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:35:16 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-30 18:35:16 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Apr-30 18:35:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:35:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:31 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-30 18:35:31 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-30 18:35:31 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-30 18:35:31 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-30 18:35:31 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-30 18:35:31 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-30 18:35:31 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-30 18:35:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-30 18:35:32 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-30 18:35:32 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-30 18:35:32 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-30 18:35:32 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-30 18:35:32 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-30 18:35:32 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-30 18:35:32 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-30 18:35:32 START begin_task: Starting task 'selecting calibration port' 2009-Apr-30 18:35:32 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-30 18:35:32 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-30 18:35:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-30 18:35:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:35:32 START begin_task: Starting task 'waiting on calport' 2009-Apr-30 18:35:32 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-30 18:35:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:32 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-30 18:35:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:35:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:32 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-30 18:35:32 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-30 18:35:32 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-30 18:35:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-30 18:35:32 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-30 18:35:32 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-30 18:35:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-30 18:35:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-30 18:35:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-30 18:35:32 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-30 18:35:32 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-30 18:35:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-30 18:35:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-30 18:35:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-30 18:35:32 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-30 18:35:32 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-30 18:35:32 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-30 18:35:32 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-30 18:35:32 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-30 18:35:32 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-30 18:35:32 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-30 18:35:32 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-30 18:35:32 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-30 18:35:32 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:35:32 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:35:32 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:35:32 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:35:32 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-30 18:35:32 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-30 18:35:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-30 18:35:33 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-30 18:35:33 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-30 18:35:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-30 18:35:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-30 18:35:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-30 18:35:33 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-30 18:35:33 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:35:33 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:35:33 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:35:33 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:35:33 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-30 18:35:33 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-30 18:35:33 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-30 18:35:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-30 18:35:33 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-30 18:35:33 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-30 18:35:33 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Apr-30 18:35:33 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Apr-30 18:35:33 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Apr-30 18:35:33 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Apr-30 18:35:33 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Apr-30 18:35:33 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-30 18:35:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Apr-30 18:35:33 LOG3 track_source: Calling 'track_source galfasrc 084600.0 +203342 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-30 18:35:33 START begin_task: Starting task 'sending tracking commands' 2009-Apr-30 18:35:33 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-30 18:35:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Apr-30 18:35:33 INFO1 track_source: Starting to track galfasrc 2009-Apr-30 18:35:33 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-30 18:35:33 LOG3 vw_send: To DATATAKING: set ra 084600.0 2009-Apr-30 18:35:33 LOG3 vw_send: To DATATAKING: set dec +203342 2009-Apr-30 18:35:33 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-30 18:35:33 LOG3 vw_send: To DATATAKING: pnt tr 084600.0 +203342 -CJ 2009-Apr-30 18:35:33 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-30 18:35:33 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-30 18:35:33 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-30 18:35:33 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-30 18:35:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-30 18:35:33 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-30 18:35:33 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-30 18:35:33 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Apr-30 18:35:33 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-30 18:35:33 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Apr-30 18:35:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-30 18:35:33 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Apr-30 18:35:33 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-30 18:35:33 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Apr-30 18:35:34 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Apr-30 18:35:34 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-30 18:35:34 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-30 18:35:34 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-30 18:35:34 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-30 18:35:34 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-30 18:35:34 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-30 18:35:34 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-30 18:35:34 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-30 18:35:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-30 18:35:34 NOTE WAPPDATA-new_file: New FITS file: wapp.20090430.a2010.0011.fits 2009-Apr-30 18:35:34 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-30 18:35:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-30 18:35:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-30 18:35:34 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090430.a2010.0011.fits} 2009-Apr-30 18:35:34 LOG4 got_cormsg: From DATATAKING: set ra 084600.0 2009-Apr-30 18:35:34 LOG4 got_cormsg: From DATATAKING: set dec +203342 2009-Apr-30 18:35:34 LOG4 got_cormsg: From DATATAKING: vw% 084600.0 2009-Apr-30 18:35:34 LOG4 got_cormsg: From DATATAKING: vw% +203342 2009-Apr-30 18:35:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:35:34 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-30 18:35:34 LOG4 got_cormsg: From DATATAKING: pnt tr 084600.0 +203342 -CJ 2009-Apr-30 18:35:34 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-30 18:35:34 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% 2009-Apr-30 18:35:34 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-30 18:35:34 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-30 18:35:34 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-30 18:35:34 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-30 18:35:34 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-30 18:35:34 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-30 18:35:34 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-30 18:35:34 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-30 18:35:34 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-30 18:35:34 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-30 18:35:35 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-30 18:35:35 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-30 18:35:35 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Apr-30 18:35:35 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Apr-30 18:35:35 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-30 18:35:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-30 18:35:35 LOG3 waittrk: Start waittrk 5 2009-Apr-30 18:35:35 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-30 18:35:35 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-30 18:35:40 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-30 18:35:40 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-30 18:35:40 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-30 18:35:40 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-30 18:36:27 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-30 18:36:27 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-30 18:36:27 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-30 18:36:27 INFO2 waittrk: Now tracking galfasrc 2009-Apr-30 18:36:27 LOG4 waittrk: Current telescope position: Az = 186.63 ZA = 2.20 2009-Apr-30 18:36:27 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-30 18:36:27 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-30 18:36:27 DONE finish_task: DONE finished waiting: telescope on source 2009-Apr-30 18:36:27 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-30 18:36:27 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-30 18:36:27 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-30 18:36:27 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-30 18:36:28 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Apr-30 18:36:28 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-30 18:36:28 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-30 18:36:28 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Apr-30 18:36:28 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-30 18:36:28 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Apr-30 18:36:28 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Apr-30 18:36:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Apr-30 18:36:28 START begin_task: Starting task 'selecting calibration type' 2009-Apr-30 18:36:28 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-30 18:36:28 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-30 18:36:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-30 18:36:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:36:28 START begin_task: Starting task 'waiting on setcal' 2009-Apr-30 18:36:28 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-30 18:36:28 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-30 18:36:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:36:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:36:28 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-30 18:36:28 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-30 18:36:28 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-30 18:36:28 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-30 18:36:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-30 18:36:28 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-30 18:36:28 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-30 18:36:28 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-30 18:36:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:36:29 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-30 18:36:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-30 18:36:29 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-30 18:36:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-30 18:36:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-30 18:36:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-30 18:36:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-30 18:36:29 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-30 18:36:29 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-30 18:36:29 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-30 18:36:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-30 18:36:29 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-30 18:36:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-30 18:36:29 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-30 18:36:29 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-30 18:36:29 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-30 18:36:29 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:36:29 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:36:29 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:36:29 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:36:29 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090430.a2010.0011.fits' is empty! 2009-Apr-30 18:36:29 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Apr-30 18:36:29 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-30 18:36:29 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-30 18:36:29 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-30 18:36:29 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-30 18:36:29 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-30 18:36:29 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-30 18:36:29 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-30 18:36:29 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-30 18:36:29 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-30 18:36:29 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-30 18:36:29 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-30 18:36:29 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-30 18:36:29 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-30 18:36:29 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-30 18:36:29 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-30 18:36:29 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-30 18:36:29 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-30 18:36:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-30 18:36:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:36:29 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-30 18:36:29 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-30 18:36:29 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-30 18:36:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:36:29 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-30 18:36:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:36:32 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-30 18:36:32 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-30 18:36:32 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-30 18:36:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-30 18:36:32 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-30 18:36:32 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-30 18:36:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-30 18:36:32 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-30 18:36:32 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-30 18:36:32 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-30 18:36:32 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-30 18:36:32 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-30 18:36:32 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-30 18:36:32 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-30 18:36:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:36:33 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-30 18:36:33 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 2 dB 2009-Apr-30 18:36:33 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-30 18:36:33 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-30 18:36:33 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-30 18:36:33 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-30 18:36:33 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-30 18:36:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.032 0.900 ALFA beam 1: 1.048 1.039 2009-Apr-30 18:36:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.989 0.957 ALFA beam 3: 1.056 1.061 2009-Apr-30 18:36:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.075 0.905 ALFA beam 5: 1.041 0.894 2009-Apr-30 18:36:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.907 0.102 ALFA beam 7: 1.001 0.127 2009-Apr-30 18:36:33 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-30 18:36:33 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-30 18:36:33 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-30 18:36:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-30 18:36:33 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-30 18:36:33 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-30 18:36:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-30 18:36:33 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-30 18:36:33 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-30 18:36:33 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-30 18:36:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-30 18:36:33 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-30 18:36:33 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-30 18:36:33 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-30 18:36:33 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-30 18:36:33 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-30 18:36:33 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:36:33 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33066 J 2009-Apr-30 18:36:33 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:36:33 LOG2 antvel: Parameters to Doppler: Topocentric 81392 2009 120 0.0 2009-Apr-30 18:36:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:36:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-30 18:36:33 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-30 18:36:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:36:33 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:36:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-30 18:36:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:36:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-30 18:36:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:36:33 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-30 18:36:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-30 18:36:33 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.758561 2009.3306649428346 18.999933 2009-Apr-30 18:36:33 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666612 20.561666666666667 2009-Apr-30 18:36:33 LOG4 log_alfabeam: ALFABEAM 1 8.767018811960174 20.455699830841962 2009-Apr-30 18:36:33 LOG4 log_alfabeam: ALFABEAM 2 8.772396593118918 20.516081921606887 2009-Apr-30 18:36:33 LOG4 log_alfabeam: ALFABEAM 3 8.772246870299670 20.622234320414407 2009-Apr-30 18:36:33 LOG4 log_alfabeam: ALFABEAM 4 8.766194712972236 20.667679214212225 2009-Apr-30 18:36:33 LOG4 log_alfabeam: ALFABEAM 5 8.760712448517795 20.604116992577403 2009-Apr-30 18:36:33 LOG4 log_alfabeam: ALFABEAM 6 8.761386045525674 20.498412495277464 2009-Apr-30 18:36:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000126 2009-Apr-30 18:36:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:36:34 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-30 18:36:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:36:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-30 18:36:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:36:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:36:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:36:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-30 18:36:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81395.00 2009-Apr-30 18:36:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:36:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:36:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:36:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:36:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:36:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:36:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:36:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:36:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:36:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-30 18:36:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.032 0.900 1.048 1.039 2009-Apr-30 18:36:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 0.957 1.056 1.061 2009-Apr-30 18:36:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.905 1.041 0.894 2009-Apr-30 18:36:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.907 0.102 1.001 0.127 2009-Apr-30 18:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.129 (still bad) 2009-Apr-30 18:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.130 (still bad) 2009-Apr-30 18:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.127 (still bad) 2009-Apr-30 18:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.128 (still bad) 2009-Apr-30 18:36:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:36:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:36:45 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-30 18:36:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:36:45 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-30 18:36:45 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-30 18:36:45 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-30 18:36:45 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-30 18:36:45 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:36:45 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:36:45 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:36:45 LOG2 antvel: Parameters to Doppler: Topocentric 81405 2009 120 0.0 2009-Apr-30 18:36:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:36:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-30 18:36:45 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-30 18:36:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:36:45 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:36:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-30 18:36:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:36:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-30 18:36:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:36:45 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-30 18:36:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-30 18:36:45 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.762182 2009.3306653547797 18.999933 2009-Apr-30 18:36:45 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666545 20.561666666666667 2009-Apr-30 18:36:45 LOG4 log_alfabeam: ALFABEAM 1 8.767195709382861 20.455845266909904 2009-Apr-30 18:36:45 LOG4 log_alfabeam: ALFABEAM 2 8.772471020637386 20.517981513500967 2009-Apr-30 18:36:45 LOG4 log_alfabeam: ALFABEAM 3 8.772144350242156 20.624055626322246 2009-Apr-30 18:36:45 LOG4 log_alfabeam: ALFABEAM 4 8.766017250494688 20.667494210576137 2009-Apr-30 18:36:45 LOG4 log_alfabeam: ALFABEAM 5 8.760642860217464 20.602136938745975 2009-Apr-30 18:36:45 LOG4 log_alfabeam: ALFABEAM 6 8.761493647008393 20.496684860281675 2009-Apr-30 18:36:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000127 2009-Apr-30 18:36:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:36:46 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-30 18:36:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:36:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-30 18:36:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:36:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:36:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.127 (still bad) 2009-Apr-30 18:36:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-30 18:36:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81407.00 2009-Apr-30 18:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:36:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.127 (still bad) 2009-Apr-30 18:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.123 (still bad) 2009-Apr-30 18:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.121 (still bad) 2009-Apr-30 18:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.123 (still bad) 2009-Apr-30 18:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.122 (still bad) 2009-Apr-30 18:36:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:36:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:36:57 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-30 18:36:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:36:57 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-30 18:36:57 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-30 18:36:57 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-30 18:36:57 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-30 18:36:57 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:36:57 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:36:57 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:36:57 LOG2 antvel: Parameters to Doppler: Topocentric 81417 2009 120 0.0 2009-Apr-30 18:36:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:36:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-30 18:36:57 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-30 18:36:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:36:57 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:36:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-30 18:36:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:36:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-30 18:36:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:36:57 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-30 18:36:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-30 18:36:57 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.765524 2009.3306657350367 18.999933 2009-Apr-30 18:36:57 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666426 20.561666666666667 2009-Apr-30 18:36:57 LOG4 log_alfabeam: ALFABEAM 1 8.767359390223223 20.456032050445081 2009-Apr-30 18:36:57 LOG4 log_alfabeam: ALFABEAM 2 8.772537190718060 20.519763797626972 2009-Apr-30 18:36:57 LOG4 log_alfabeam: ALFABEAM 3 8.772046590073755 20.625713329288200 2009-Apr-30 18:36:57 LOG4 log_alfabeam: ALFABEAM 4 8.765853164668462 20.667270540647760 2009-Apr-30 18:36:57 LOG4 log_alfabeam: ALFABEAM 5 8.760581411613728 20.600282972288536 2009-Apr-30 18:36:57 LOG4 log_alfabeam: ALFABEAM 6 8.761595828745326 20.495116828359915 2009-Apr-30 18:36:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000128 2009-Apr-30 18:36:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:36:58 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-30 18:36:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:36:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-30 18:36:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:36:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:36:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:36:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-30 18:36:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81419.00 2009-Apr-30 18:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-30 18:37:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:37:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:37:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:37:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:37:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:37:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.120 (still bad) 2009-Apr-30 18:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Apr-30 18:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 18:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.123 (still bad) 2009-Apr-30 18:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 18:37:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:37:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:37:09 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-30 18:37:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:37:09 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-30 18:37:09 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-30 18:37:09 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-30 18:37:09 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-30 18:37:09 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:37:09 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:37:09 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:37:09 LOG2 antvel: Parameters to Doppler: Topocentric 81429 2009 120 0.0 2009-Apr-30 18:37:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:37:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-30 18:37:09 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-30 18:37:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:37:09 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:37:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-30 18:37:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:37:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-30 18:37:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:37:09 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-30 18:37:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-30 18:37:09 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.768867 2009.3306661152938 18.999933 2009-Apr-30 18:37:09 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666756 20.561666666666667 2009-Apr-30 18:37:09 LOG4 log_alfabeam: ALFABEAM 1 8.767523281696892 20.456269631164201 2009-Apr-30 18:37:09 LOG4 log_alfabeam: ALFABEAM 2 8.772600832771587 20.521572248411236 2009-Apr-30 18:37:09 LOG4 log_alfabeam: ALFABEAM 3 8.771945894662860 20.627346458671916 2009-Apr-30 18:37:09 LOG4 log_alfabeam: ALFABEAM 4 8.765688982343054 20.666995813393800 2009-Apr-30 18:37:09 LOG4 log_alfabeam: ALFABEAM 5 8.760522726236674 20.598405529961003 2009-Apr-30 18:37:09 LOG4 log_alfabeam: ALFABEAM 6 8.761700673798552 20.493576257529739 2009-Apr-30 18:37:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000129 2009-Apr-30 18:37:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:37:10 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-30 18:37:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:37:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-30 18:37:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:37:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:37:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:37:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-30 18:37:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81431.00 2009-Apr-30 18:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 18:37:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:37:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:37:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:37:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:37:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:37:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-30 18:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 18:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-30 18:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 18:37:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-30 18:37:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:37:21 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-30 18:37:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:37:21 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-30 18:37:21 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-30 18:37:21 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-30 18:37:21 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-30 18:37:21 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:37:21 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:37:21 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:37:21 LOG2 antvel: Parameters to Doppler: Topocentric 81441 2009 120 0.0 2009-Apr-30 18:37:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:37:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-30 18:37:21 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-30 18:37:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:37:21 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:37:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-30 18:37:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:37:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-30 18:37:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:37:21 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-30 18:37:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-30 18:37:21 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.772209 2009.330666495551 18.999933 2009-Apr-30 18:37:21 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666284 20.561666666666678 2009-Apr-30 18:37:21 LOG4 log_alfabeam: ALFABEAM 1 8.767687053959696 20.456557914994598 2009-Apr-30 18:37:21 LOG4 log_alfabeam: ALFABEAM 2 8.772661796756873 20.523403442859500 2009-Apr-30 18:37:21 LOG4 log_alfabeam: ALFABEAM 3 8.771842443800422 20.628951471848001 2009-Apr-30 18:37:21 LOG4 log_alfabeam: ALFABEAM 4 8.765525035180209 20.666670248759175 2009-Apr-30 18:37:21 LOG4 log_alfabeam: ALFABEAM 5 8.760466938762805 20.596508291136058 2009-Apr-30 18:37:21 LOG4 log_alfabeam: ALFABEAM 6 8.761807986173450 20.492066392805935 2009-Apr-30 18:37:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000130 2009-Apr-30 18:37:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:37:22 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-30 18:37:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:37:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-30 18:37:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:37:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:37:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:37:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-30 18:37:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81443.00 2009-Apr-30 18:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 18:37:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:37:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:37:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:37:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:37:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:37:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:37:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:37:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:37:33 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-30 18:37:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:37:33 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-30 18:37:33 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-30 18:37:33 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-30 18:37:33 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-30 18:37:33 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:37:33 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:37:33 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:37:33 LOG2 antvel: Parameters to Doppler: Topocentric 81453 2009 120 0.0 2009-Apr-30 18:37:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:37:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-30 18:37:33 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-30 18:37:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:37:33 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:37:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-30 18:37:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:37:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-30 18:37:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:37:33 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-30 18:37:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-30 18:37:33 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.775552 2009.330666875808 18.999933 2009-Apr-30 18:37:33 LOG4 log_alfabeam: ALFABEAM 0 8.766666666644115 20.561666666666440 2009-Apr-30 18:37:33 LOG4 log_alfabeam: ALFABEAM 1 8.767850572011506 20.456896908259374 2009-Apr-30 18:37:33 LOG4 log_alfabeam: ALFABEAM 2 8.772720017571608 20.525256021061299 2009-Apr-30 18:37:33 LOG4 log_alfabeam: ALFABEAM 3 8.771736307833978 20.630526862529027 2009-Apr-30 18:37:33 LOG4 log_alfabeam: ALFABEAM 4 8.765361459078603 20.666293923417800 2009-Apr-30 18:37:33 LOG4 log_alfabeam: ALFABEAM 5 8.760414103635132 20.594592776411588 2009-Apr-30 18:37:33 LOG4 log_alfabeam: ALFABEAM 6 8.761917685623152 20.490588538368968 2009-Apr-30 18:37:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000131 2009-Apr-30 18:37:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:37:34 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-30 18:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:37:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:37:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-30 18:37:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:37:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:37:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:37:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-30 18:37:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81455.00 2009-Apr-30 18:37:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:37:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:37:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:37:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:37:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:37:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:37:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 0.896 1.037 1.034 2009-Apr-30 18:37:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.987 0.953 1.057 1.076 2009-Apr-30 18:37:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.920 1.028 0.902 2009-Apr-30 18:37:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.104 1.011 0.129 2009-Apr-30 18:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-30 18:37:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:37:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:37:45 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-30 18:37:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:37:45 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-30 18:37:45 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-30 18:37:45 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-30 18:37:45 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-30 18:37:45 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:37:45 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:37:45 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:37:45 LOG2 antvel: Parameters to Doppler: Topocentric 81465 2009 120 0.0 2009-Apr-30 18:37:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:37:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-30 18:37:45 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-30 18:37:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:37:45 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:37:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-30 18:37:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:37:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-30 18:37:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:37:45 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-30 18:37:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-30 18:37:45 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.778894 2009.330667256065 18.999933 2009-Apr-30 18:37:45 LOG4 log_alfabeam: ALFABEAM 0 8.766666666668357 20.561666666666685 2009-Apr-30 18:37:45 LOG4 log_alfabeam: ALFABEAM 1 8.768013505636691 20.457286027346125 2009-Apr-30 18:37:45 LOG4 log_alfabeam: ALFABEAM 2 8.772775370073589 20.527126322527529 2009-Apr-30 18:37:45 LOG4 log_alfabeam: ALFABEAM 3 8.771627694292279 20.632069340692635 2009-Apr-30 18:37:45 LOG4 log_alfabeam: ALFABEAM 4 8.765198584626077 20.665867549214411 2009-Apr-30 18:37:45 LOG4 log_alfabeam: ALFABEAM 5 8.760364327798756 20.592662867089359 2009-Apr-30 18:37:45 LOG4 log_alfabeam: ALFABEAM 6 8.762029551941527 20.489145652563824 2009-Apr-30 18:37:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000132 2009-Apr-30 18:37:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:37:46 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-30 18:37:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:37:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-30 18:37:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:37:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:37:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:37:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-30 18:37:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81467.00 2009-Apr-30 18:37:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:37:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:37:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:37:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:37:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:37:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.081 (still bad) 2009-Apr-30 18:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.078 (still bad) 2009-Apr-30 18:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.081 (still bad) 2009-Apr-30 18:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.080 (still bad) 2009-Apr-30 18:37:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:37:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:37:57 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-30 18:37:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:37:57 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-30 18:37:57 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-30 18:37:57 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-30 18:37:57 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-30 18:37:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-30 18:37:57 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-30 18:37:57 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-30 18:37:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-30 18:37:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-30 18:37:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-30 18:37:57 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-30 18:37:57 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-30 18:37:57 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-30 18:37:57 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-30 18:37:57 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:37:57 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:37:57 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:37:57 LOG2 antvel: Parameters to Doppler: Topocentric 81477 2009 120 0.0 2009-Apr-30 18:37:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:37:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-30 18:37:57 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-30 18:37:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:37:57 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:37:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-30 18:37:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:37:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-30 18:37:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:37:57 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-30 18:37:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-30 18:37:57 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.782237 2009.330667636322 18.999933 2009-Apr-30 18:37:57 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666630 20.561666666666664 2009-Apr-30 18:37:57 LOG4 log_alfabeam: ALFABEAM 1 8.768175722025362 20.457724911460094 2009-Apr-30 18:37:57 LOG4 log_alfabeam: ALFABEAM 2 8.772827808958569 20.529012833597275 2009-Apr-30 18:37:57 LOG4 log_alfabeam: ALFABEAM 3 8.771516693112309 20.633577616562892 2009-Apr-30 18:37:57 LOG4 log_alfabeam: ALFABEAM 4 8.765036544340466 20.665391570222372 2009-Apr-30 18:37:57 LOG4 log_alfabeam: ALFABEAM 5 8.760317643811259 20.590720205641098 2009-Apr-30 18:37:57 LOG4 log_alfabeam: ALFABEAM 6 8.762143488332587 20.487738799494867 2009-Apr-30 18:37:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000133 2009-Apr-30 18:37:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:37:58 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-30 18:37:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:37:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-30 18:37:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:37:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:37:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:37:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-30 18:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.079 (still bad) 2009-Apr-30 18:37:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81479.00 2009-Apr-30 18:38:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:38:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:38:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:38:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:38:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:38:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.590 (still bad) 2009-Apr-30 18:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.588 (still bad) 2009-Apr-30 18:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.584 (still bad) 2009-Apr-30 18:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.594 (still bad) 2009-Apr-30 18:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.588 (still bad) 2009-Apr-30 18:38:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:38:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:38:09 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-30 18:38:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:38:09 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-30 18:38:09 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-30 18:38:09 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-30 18:38:09 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-30 18:38:09 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:38:09 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:38:09 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:38:09 LOG2 antvel: Parameters to Doppler: Topocentric 81489 2009 120 0.0 2009-Apr-30 18:38:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:38:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-30 18:38:09 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-30 18:38:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:38:09 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:38:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-30 18:38:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:38:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-30 18:38:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:38:09 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-30 18:38:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-30 18:38:09 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.785579 2009.3306680165792 18.999933 2009-Apr-30 18:38:09 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666962 20.561666666666678 2009-Apr-30 18:38:09 LOG4 log_alfabeam: ALFABEAM 1 8.768336897706170 20.458212496542284 2009-Apr-30 18:38:09 LOG4 log_alfabeam: ALFABEAM 2 8.772877236910361 20.530911732607361 2009-Apr-30 18:38:09 LOG4 log_alfabeam: ALFABEAM 3 8.771403535312858 20.635048727007938 2009-Apr-30 18:38:09 LOG4 log_alfabeam: ALFABEAM 4 8.764875660608388 20.664867176865521 2009-Apr-30 18:38:09 LOG4 log_alfabeam: ALFABEAM 5 8.760274128530421 20.588768791491432 2009-Apr-30 18:38:09 LOG4 log_alfabeam: ALFABEAM 6 8.762259255058451 20.486370587337539 2009-Apr-30 18:38:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000134 2009-Apr-30 18:38:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:38:10 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-30 18:38:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:38:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-30 18:38:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:38:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:38:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:38:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-30 18:38:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81491.00 2009-Apr-30 18:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.586 (still bad) 2009-Apr-30 18:38:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:38:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:38:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:38:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:38:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:38:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.584 (still bad) 2009-Apr-30 18:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.580 (still bad) 2009-Apr-30 18:38:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.583 (still bad) 2009-Apr-30 18:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.588 (still bad) 2009-Apr-30 18:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.586 (still bad) 2009-Apr-30 18:38:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:38:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:38:21 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-30 18:38:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:38:21 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-30 18:38:21 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-30 18:38:21 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-30 18:38:21 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-30 18:38:21 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:38:21 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:38:21 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:38:21 LOG2 antvel: Parameters to Doppler: Topocentric 81501 2009 120 0.0 2009-Apr-30 18:38:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:38:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-30 18:38:21 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-30 18:38:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:38:21 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:38:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-30 18:38:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:38:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-30 18:38:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:38:21 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-30 18:38:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-30 18:38:21 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.788921 2009.3306683968362 18.999933 2009-Apr-30 18:38:21 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666836 20.561666666666667 2009-Apr-30 18:38:21 LOG4 log_alfabeam: ALFABEAM 1 8.768496860324793 20.458747904159829 2009-Apr-30 18:38:21 LOG4 log_alfabeam: ALFABEAM 2 8.772923617003016 20.532820847420297 2009-Apr-30 18:38:21 LOG4 log_alfabeam: ALFABEAM 3 8.771288361121805 20.636481233213086 2009-Apr-30 18:38:21 LOG4 log_alfabeam: ALFABEAM 4 8.764716104188174 20.664295338267010 2009-Apr-30 18:38:21 LOG4 log_alfabeam: ALFABEAM 5 8.760233802808484 20.586810902130495 2009-Apr-30 18:38:21 LOG4 log_alfabeam: ALFABEAM 6 8.762376707738909 20.485042184493402 2009-Apr-30 18:38:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000135 2009-Apr-30 18:38:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:38:22 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-30 18:38:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:38:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-30 18:38:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:38:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:38:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:38:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-30 18:38:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81503.00 2009-Apr-30 18:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.585 (still bad) 2009-Apr-30 18:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:38:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.577 (still bad) 2009-Apr-30 18:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.576 (still bad) 2009-Apr-30 18:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.576 (still bad) 2009-Apr-30 18:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.581 (still bad) 2009-Apr-30 18:38:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.576 (still bad) 2009-Apr-30 18:38:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:38:33 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-30 18:38:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:38:33 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-30 18:38:33 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-30 18:38:33 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-30 18:38:33 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-30 18:38:33 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:38:33 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:38:33 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:38:33 LOG2 antvel: Parameters to Doppler: Topocentric 81513 2009 120 0.0 2009-Apr-30 18:38:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:38:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-30 18:38:33 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-30 18:38:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:38:33 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:38:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-30 18:38:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:38:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-30 18:38:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:38:33 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-30 18:38:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-30 18:38:33 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.792264 2009.3306687770933 18.999933 2009-Apr-30 18:38:33 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666765 20.561666666666678 2009-Apr-30 18:38:33 LOG4 log_alfabeam: ALFABEAM 1 8.768655442940238 20.459330121240733 2009-Apr-30 18:38:33 LOG4 log_alfabeam: ALFABEAM 2 8.772966921756668 20.534737995793229 2009-Apr-30 18:38:33 LOG4 log_alfabeam: ALFABEAM 3 8.771171315563587 20.637873827015518 2009-Apr-30 18:38:33 LOG4 log_alfabeam: ALFABEAM 4 8.764558039940804 20.663677155386303 2009-Apr-30 18:38:33 LOG4 log_alfabeam: ALFABEAM 5 8.760196677613225 20.584848807265217 2009-Apr-30 18:38:33 LOG4 log_alfabeam: ALFABEAM 6 8.762495698714087 20.483754626744350 2009-Apr-30 18:38:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000136 2009-Apr-30 18:38:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:38:34 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-30 18:38:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:38:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-30 18:38:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:38:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:38:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:38:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-30 18:38:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81515.00 2009-Apr-30 18:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.576 (still bad) 2009-Apr-30 18:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:38:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.562 (still bad) 2009-Apr-30 18:38:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 18:38:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.463 1.248 1.461 1.439 2009-Apr-30 18:38:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.395 1.341 1.515 1.503 2009-Apr-30 18:38:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.560 1.314 1.494 1.229 2009-Apr-30 18:38:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.331 0.105 1.459 0.130 2009-Apr-30 18:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.562 (still bad) 2009-Apr-30 18:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.565 (still bad) 2009-Apr-30 18:38:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:38:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:38:45 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-30 18:38:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:38:45 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-30 18:38:45 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-30 18:38:45 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-30 18:38:45 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-30 18:38:45 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:38:45 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:38:45 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:38:45 LOG2 antvel: Parameters to Doppler: Topocentric 81525 2009 120 0.0 2009-Apr-30 18:38:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:38:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-30 18:38:45 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-30 18:38:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:38:45 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:38:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-30 18:38:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:38:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-30 18:38:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:38:45 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-30 18:38:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-30 18:38:45 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.795606 2009.3306691573503 18.999933 2009-Apr-30 18:38:45 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666760 20.561666666666678 2009-Apr-30 18:38:45 LOG4 log_alfabeam: ALFABEAM 1 8.768812344737036 20.459957424629405 2009-Apr-30 18:38:45 LOG4 log_alfabeam: ALFABEAM 2 8.773007098482097 20.536659270772144 2009-Apr-30 18:38:45 LOG4 log_alfabeam: ALFABEAM 3 8.771052654830449 20.639224142677261 2009-Apr-30 18:38:45 LOG4 log_alfabeam: ALFABEAM 4 8.764401765527115 20.663014467366580 2009-Apr-30 18:38:45 LOG4 log_alfabeam: ALFABEAM 5 8.760162783142174 20.582886518159928 2009-Apr-30 18:38:45 LOG4 log_alfabeam: ALFABEAM 6 8.762615969368511 20.482509912481564 2009-Apr-30 18:38:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000137 2009-Apr-30 18:38:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:38:46 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-30 18:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.563 (still bad) 2009-Apr-30 18:38:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:38:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-30 18:38:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:38:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:38:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:38:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-30 18:38:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81527.00 2009-Apr-30 18:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.563 (still bad) 2009-Apr-30 18:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:38:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.533 (still bad) 2009-Apr-30 18:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.532 (still bad) 2009-Apr-30 18:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.535 (still bad) 2009-Apr-30 18:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.538 (still bad) 2009-Apr-30 18:38:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:38:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:38:57 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-30 18:38:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:38:57 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-30 18:38:57 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-30 18:38:57 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-30 18:38:57 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-30 18:38:57 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:38:57 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:38:57 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:38:57 LOG2 antvel: Parameters to Doppler: Topocentric 81537 2009 120 0.0 2009-Apr-30 18:38:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:38:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-30 18:38:57 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-30 18:38:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:38:57 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:38:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-30 18:38:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:38:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-30 18:38:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:38:57 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-30 18:38:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-30 18:38:57 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.798949 2009.3306695376073 18.999933 2009-Apr-30 18:38:57 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666723 20.561666666666678 2009-Apr-30 18:38:57 LOG4 log_alfabeam: ALFABEAM 1 8.768967463126016 20.460628647051387 2009-Apr-30 18:38:57 LOG4 log_alfabeam: ALFABEAM 2 8.773044157564950 20.538583077590054 2009-Apr-30 18:38:57 LOG4 log_alfabeam: ALFABEAM 3 8.770932498564207 20.640531648770619 2009-Apr-30 18:38:57 LOG4 log_alfabeam: ALFABEAM 4 8.764247380512096 20.662308509906094 2009-Apr-30 18:38:57 LOG4 log_alfabeam: ALFABEAM 5 8.760132093732897 20.580925659308143 2009-Apr-30 18:38:57 LOG4 log_alfabeam: ALFABEAM 6 8.762737401645754 20.481308334002367 2009-Apr-30 18:38:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000138 2009-Apr-30 18:38:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:38:58 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-30 18:38:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-30 18:38:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:38:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:38:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:38:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.531 (still bad) 2009-Apr-30 18:38:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-30 18:38:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81539.00 2009-Apr-30 18:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:39:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.531 (still bad) 2009-Apr-30 18:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.527 (still bad) 2009-Apr-30 18:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.529 (still bad) 2009-Apr-30 18:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.530 (still bad) 2009-Apr-30 18:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.526 (still bad) 2009-Apr-30 18:39:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:39:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:39:09 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-30 18:39:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:39:09 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-30 18:39:09 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-30 18:39:09 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-30 18:39:09 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-30 18:39:09 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:39:09 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:39:09 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:39:09 LOG2 antvel: Parameters to Doppler: Topocentric 81549 2009 120 0.0 2009-Apr-30 18:39:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:39:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-30 18:39:09 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-30 18:39:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:39:09 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:39:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-30 18:39:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:39:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-30 18:39:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:39:09 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-30 18:39:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-30 18:39:09 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.802291 2009.3306699178645 18.999933 2009-Apr-30 18:39:09 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666707 20.561666666666664 2009-Apr-30 18:39:09 LOG4 log_alfabeam: ALFABEAM 1 8.769120519567137 20.461341692475735 2009-Apr-30 18:39:09 LOG4 log_alfabeam: ALFABEAM 2 8.773078076102415 20.540505557065718 2009-Apr-30 18:39:09 LOG4 log_alfabeam: ALFABEAM 3 8.770811112198157 20.641794422556249 2009-Apr-30 18:39:09 LOG4 log_alfabeam: ALFABEAM 4 8.764095159091225 20.661561483773752 2009-Apr-30 18:39:09 LOG4 log_alfabeam: ALFABEAM 5 8.760104609397013 20.578970143221746 2009-Apr-30 18:39:09 LOG4 log_alfabeam: ALFABEAM 6 8.762859731800569 20.480151453485171 2009-Apr-30 18:39:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000139 2009-Apr-30 18:39:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:39:10 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-30 18:39:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:39:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-30 18:39:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:39:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:39:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:39:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-30 18:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.526 (still bad) 2009-Apr-30 18:39:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81551.00 2009-Apr-30 18:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:39:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.523 (still bad) 2009-Apr-30 18:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.521 (still bad) 2009-Apr-30 18:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.520 (still bad) 2009-Apr-30 18:39:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.525 (still bad) 2009-Apr-30 18:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.522 (still bad) 2009-Apr-30 18:39:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:39:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:39:21 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-30 18:39:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:39:21 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-30 18:39:21 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Apr-30 18:39:21 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-30 18:39:21 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-30 18:39:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-30 18:39:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-30 18:39:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-30 18:39:21 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-30 18:39:21 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-30 18:39:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-30 18:39:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-30 18:39:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-30 18:39:21 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-30 18:39:21 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-30 18:39:21 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-30 18:39:21 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-30 18:39:21 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-30 18:39:21 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:39:21 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:39:21 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:39:21 LOG2 antvel: Parameters to Doppler: Topocentric 81561 2009 120 0.0 2009-Apr-30 18:39:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:39:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-30 18:39:21 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-30 18:39:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:39:21 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:39:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-30 18:39:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:39:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-30 18:39:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:39:21 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-30 18:39:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-30 18:39:21 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.805634 2009.3306702981215 18.999933 2009-Apr-30 18:39:21 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666682 20.561666666666667 2009-Apr-30 18:39:21 LOG4 log_alfabeam: ALFABEAM 1 8.769271431505155 20.462095156174815 2009-Apr-30 18:39:21 LOG4 log_alfabeam: ALFABEAM 2 8.773108886232746 20.542425203397048 2009-Apr-30 18:39:21 LOG4 log_alfabeam: ALFABEAM 3 8.770688618248220 20.643012279814716 2009-Apr-30 18:39:21 LOG4 log_alfabeam: ALFABEAM 4 8.763945179953700 20.660774851143987 2009-Apr-30 18:39:21 LOG4 log_alfabeam: ALFABEAM 5 8.760080282880050 20.577021464412002 2009-Apr-30 18:39:21 LOG4 log_alfabeam: ALFABEAM 6 8.762982842085853 20.479039228795699 2009-Apr-30 18:39:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000140 2009-Apr-30 18:39:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:39:22 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-30 18:39:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:39:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-30 18:39:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:39:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:39:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:39:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-30 18:39:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81563.00 2009-Apr-30 18:39:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.521 (still bad) 2009-Apr-30 18:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:39:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.126 (still bad) 2009-Apr-30 18:39:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.126 (still bad) 2009-Apr-30 18:39:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.124 (still bad) 2009-Apr-30 18:39:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.127 (still bad) 2009-Apr-30 18:39:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.126 (still bad) 2009-Apr-30 18:39:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:39:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:39:33 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-30 18:39:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:39:33 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-30 18:39:33 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-30 18:39:33 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-30 18:39:33 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-30 18:39:33 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:39:33 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:39:33 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:39:33 LOG2 antvel: Parameters to Doppler: Topocentric 81573 2009 120 0.0 2009-Apr-30 18:39:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:39:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-30 18:39:33 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-30 18:39:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:39:33 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:39:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-30 18:39:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:39:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-30 18:39:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:39:33 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-30 18:39:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-30 18:39:33 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.808976 2009.3306706783785 18.999933 2009-Apr-30 18:39:33 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666698 20.561666666666667 2009-Apr-30 18:39:33 LOG4 log_alfabeam: ALFABEAM 1 8.769419947054114 20.462886637549278 2009-Apr-30 18:39:33 LOG4 log_alfabeam: ALFABEAM 2 8.773136593448369 20.544338282521931 2009-Apr-30 18:39:33 LOG4 log_alfabeam: ALFABEAM 3 8.770565285205885 20.644183753513232 2009-Apr-30 18:39:33 LOG4 log_alfabeam: ALFABEAM 4 8.763797689660818 20.659951103512871 2009-Apr-30 18:39:33 LOG4 log_alfabeam: ALFABEAM 5 8.760059086142434 20.575083360789613 2009-Apr-30 18:39:33 LOG4 log_alfabeam: ALFABEAM 6 8.763106469499196 20.477972784100523 2009-Apr-30 18:39:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000141 2009-Apr-30 18:39:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:39:34 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-30 18:39:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:39:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-30 18:39:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:39:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:39:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:39:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-30 18:39:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81575.00 2009-Apr-30 18:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.124 (still bad) 2009-Apr-30 18:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:39:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.121 (still bad) 2009-Apr-30 18:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-30 18:39:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 18:39:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.918 1.069 1.055 2009-Apr-30 18:39:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.971 1.102 1.096 2009-Apr-30 18:39:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.938 1.084 0.926 2009-Apr-30 18:39:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.105 1.026 0.130 2009-Apr-30 18:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.121 (still bad) 2009-Apr-30 18:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-30 18:39:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:39:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:39:45 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-30 18:39:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:39:45 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-30 18:39:45 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-30 18:39:45 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-30 18:39:45 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-30 18:39:45 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:39:45 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:39:45 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:39:45 LOG2 antvel: Parameters to Doppler: Topocentric 81585 2009 120 0.0 2009-Apr-30 18:39:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:39:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-30 18:39:45 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-30 18:39:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:39:45 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:39:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-30 18:39:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:39:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-30 18:39:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:39:45 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-30 18:39:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-30 18:39:45 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.812319 2009.3306710586355 18.999933 2009-Apr-30 18:39:45 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666694 20.561666666666667 2009-Apr-30 18:39:45 LOG4 log_alfabeam: ALFABEAM 1 8.769566006571804 20.463714558316159 2009-Apr-30 18:39:45 LOG4 log_alfabeam: ALFABEAM 2 8.773161249762673 20.546243437627144 2009-Apr-30 18:39:45 LOG4 log_alfabeam: ALFABEAM 3 8.770441233314699 20.645309005103179 2009-Apr-30 18:39:45 LOG4 log_alfabeam: ALFABEAM 4 8.763652743355424 20.659091863851494 2009-Apr-30 18:39:45 LOG4 log_alfabeam: ALFABEAM 5 8.760040952836613 20.573157139616736 2009-Apr-30 18:39:45 LOG4 log_alfabeam: ALFABEAM 6 8.763230501373375 20.476951753090407 2009-Apr-30 18:39:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000142 2009-Apr-30 18:39:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:39:46 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-30 18:39:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:39:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-30 18:39:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:39:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:39:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:39:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-30 18:39:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81587.00 2009-Apr-30 18:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 18:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:39:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 18:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.116 (still bad) 2009-Apr-30 18:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.114 (still bad) 2009-Apr-30 18:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Apr-30 18:39:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 18:39:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:39:57 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-30 18:39:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:39:57 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-30 18:39:57 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-30 18:39:57 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-30 18:39:57 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-30 18:39:57 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:39:57 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:39:57 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:39:57 LOG2 antvel: Parameters to Doppler: Topocentric 81597 2009 120 0.0 2009-Apr-30 18:39:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:39:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-30 18:39:57 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-30 18:39:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:39:57 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:39:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-30 18:39:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:39:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-30 18:39:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:39:57 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-30 18:39:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-30 18:39:57 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.815661 2009.3306714388925 18.999933 2009-Apr-30 18:39:57 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666779 20.561666666666682 2009-Apr-30 18:39:57 LOG4 log_alfabeam: ALFABEAM 1 8.769709387842077 20.464576288924931 2009-Apr-30 18:39:57 LOG4 log_alfabeam: ALFABEAM 2 8.773182886640862 20.548137126908749 2009-Apr-30 18:39:57 LOG4 log_alfabeam: ALFABEAM 3 8.770316728241749 20.646387016865940 2009-Apr-30 18:39:57 LOG4 log_alfabeam: ALFABEAM 4 8.763510557191317 20.658199837069997 2009-Apr-30 18:39:57 LOG4 log_alfabeam: ALFABEAM 5 8.760025829960455 20.571246300888610 2009-Apr-30 18:39:57 LOG4 log_alfabeam: ALFABEAM 6 8.763354680860141 20.475976837457043 2009-Apr-30 18:39:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000143 2009-Apr-30 18:39:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:39:58 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-30 18:39:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:39:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-30 18:39:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:39:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:39:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:39:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-30 18:39:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81599.00 2009-Apr-30 18:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Apr-30 18:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:40:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 18:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 18:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 18:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Apr-30 18:40:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:40:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:40:09 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-30 18:40:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:40:09 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-30 18:40:09 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-30 18:40:09 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-30 18:40:09 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-30 18:40:09 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:40:09 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:40:09 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:40:09 LOG2 antvel: Parameters to Doppler: Topocentric 81609 2009 120 0.0 2009-Apr-30 18:40:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:40:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-30 18:40:09 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-30 18:40:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:40:09 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:40:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-30 18:40:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:40:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-30 18:40:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:40:09 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-30 18:40:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-30 18:40:09 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.819004 2009.3306718191498 18.999933 2009-Apr-30 18:40:09 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666712 20.561666666666678 2009-Apr-30 18:40:09 LOG4 log_alfabeam: ALFABEAM 1 8.769850055737026 20.465470145086652 2009-Apr-30 18:40:09 LOG4 log_alfabeam: ALFABEAM 2 8.773201573289052 20.550018191461518 2009-Apr-30 18:40:09 LOG4 log_alfabeam: ALFABEAM 3 8.770191883274535 20.647418278155392 2009-Apr-30 18:40:09 LOG4 log_alfabeam: ALFABEAM 4 8.763371161388458 20.657276738460531 2009-Apr-30 18:40:09 LOG4 log_alfabeam: ALFABEAM 5 8.760013635281068 20.569351920344531 2009-Apr-30 18:40:09 LOG4 log_alfabeam: ALFABEAM 6 8.763478904555344 20.475047371285743 2009-Apr-30 18:40:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000144 2009-Apr-30 18:40:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:40:10 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-30 18:40:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 18:40:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:40:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-30 18:40:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:40:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:40:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:40:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-30 18:40:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81611.00 2009-Apr-30 18:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 18:40:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:40:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:40:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:40:21 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-30 18:40:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:40:21 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-30 18:40:21 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-30 18:40:21 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-30 18:40:21 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-30 18:40:21 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:40:21 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:40:21 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:40:21 LOG2 antvel: Parameters to Doppler: Topocentric 81621 2009 120 0.0 2009-Apr-30 18:40:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:40:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-30 18:40:21 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-30 18:40:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:40:21 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:40:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-30 18:40:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:40:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-30 18:40:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:40:21 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-30 18:40:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-30 18:40:21 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.822346 2009.3306721994068 18.999933 2009-Apr-30 18:40:21 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666701 20.561666666666653 2009-Apr-30 18:40:21 LOG4 log_alfabeam: ALFABEAM 1 8.769987819321710 20.466393346059384 2009-Apr-30 18:40:21 LOG4 log_alfabeam: ALFABEAM 2 8.773217363935046 20.551883335742648 2009-Apr-30 18:40:21 LOG4 log_alfabeam: ALFABEAM 3 8.770066955989652 20.648402197329489 2009-Apr-30 18:40:21 LOG4 log_alfabeam: ALFABEAM 4 8.763234740335170 20.656325407813547 2009-Apr-30 18:40:21 LOG4 log_alfabeam: ALFABEAM 5 8.760004294595403 20.567477211707097 2009-Apr-30 18:40:21 LOG4 log_alfabeam: ALFABEAM 6 8.763602926445589 20.474163663958876 2009-Apr-30 18:40:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000145 2009-Apr-30 18:40:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:40:22 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-30 18:40:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:40:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-30 18:40:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:40:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:40:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-30 18:40:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-30 18:40:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81623.00 2009-Apr-30 18:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:40:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-30 18:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.081 (still bad) 2009-Apr-30 18:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.080 (still bad) 2009-Apr-30 18:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.079 (still bad) 2009-Apr-30 18:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:40:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:40:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:40:33 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-30 18:40:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:40:33 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-30 18:40:33 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-30 18:40:33 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-30 18:40:33 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-30 18:40:33 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:40:33 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:40:33 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:40:33 LOG2 antvel: Parameters to Doppler: Topocentric 81633 2009 120 0.0 2009-Apr-30 18:40:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:40:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-30 18:40:33 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-30 18:40:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:40:33 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:40:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-30 18:40:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:40:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-30 18:40:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:40:33 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-30 18:40:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-30 18:40:33 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.825689 2009.3306725796638 18.999933 2009-Apr-30 18:40:33 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666689 20.561666666666678 2009-Apr-30 18:40:33 LOG4 log_alfabeam: ALFABEAM 1 8.770122668336125 20.467344168081979 2009-Apr-30 18:40:33 LOG4 log_alfabeam: ALFABEAM 2 8.773230341741643 20.553731634576859 2009-Apr-30 18:40:33 LOG4 log_alfabeam: ALFABEAM 3 8.769942048750025 20.649339560415655 2009-Apr-30 18:40:33 LOG4 log_alfabeam: ALFABEAM 4 8.763101299200923 20.655347586111500 2009-Apr-30 18:40:33 LOG4 log_alfabeam: ALFABEAM 5 8.759997713423424 20.565622989357571 2009-Apr-30 18:40:33 LOG4 log_alfabeam: ALFABEAM 6 8.763726655784858 20.473324785780257 2009-Apr-30 18:40:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000146 2009-Apr-30 18:40:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:40:34 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-30 18:40:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:40:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-30 18:40:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:40:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:40:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:40:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-30 18:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.079 (still bad) 2009-Apr-30 18:40:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81635.00 2009-Apr-30 18:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:40:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.079 (still bad) 2009-Apr-30 18:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.078 (still bad) 2009-Apr-30 18:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.076 (still bad) 2009-Apr-30 18:40:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:40:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 0.896 1.033 1.035 2009-Apr-30 18:40:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.985 0.954 1.046 1.073 2009-Apr-30 18:40:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.927 1.012 0.896 2009-Apr-30 18:40:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.104 1.008 0.129 2009-Apr-30 18:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.080 (still bad) 2009-Apr-30 18:40:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:40:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:40:45 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-30 18:40:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:40:45 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-30 18:40:45 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-30 18:40:45 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-30 18:40:45 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-30 18:40:45 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-30 18:40:45 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-30 18:40:45 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-30 18:40:45 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-30 18:40:45 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-30 18:40:45 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-30 18:40:45 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-30 18:40:45 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-30 18:40:45 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-30 18:40:45 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-30 18:40:45 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:40:45 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:40:45 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:40:45 LOG2 antvel: Parameters to Doppler: Topocentric 81645 2009 120 0.0 2009-Apr-30 18:40:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:40:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-30 18:40:45 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-30 18:40:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:40:45 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:40:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-30 18:40:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:40:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-30 18:40:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:40:45 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-30 18:40:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-30 18:40:45 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.829031 2009.3306729599208 18.999933 2009-Apr-30 18:40:45 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666721 20.561666666666678 2009-Apr-30 18:40:45 LOG4 log_alfabeam: ALFABEAM 1 8.770254443408476 20.468319754397125 2009-Apr-30 18:40:45 LOG4 log_alfabeam: ALFABEAM 2 8.773240579976020 20.555560077988250 2009-Apr-30 18:40:45 LOG4 log_alfabeam: ALFABEAM 3 8.769817406625076 20.650230165088185 2009-Apr-30 18:40:45 LOG4 log_alfabeam: ALFABEAM 4 8.762970990572267 20.654346172934250 2009-Apr-30 18:40:45 LOG4 log_alfabeam: ALFABEAM 5 8.759993800496270 20.563792148299051 2009-Apr-30 18:40:45 LOG4 log_alfabeam: ALFABEAM 6 8.763849861166038 20.472530695102034 2009-Apr-30 18:40:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000147 2009-Apr-30 18:40:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:40:46 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-30 18:40:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-30 18:40:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:40:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:40:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:40:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:40:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-30 18:40:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81647.00 2009-Apr-30 18:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.076 (still bad) 2009-Apr-30 18:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:40:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.583 (still bad) 2009-Apr-30 18:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.582 (still bad) 2009-Apr-30 18:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.582 (still bad) 2009-Apr-30 18:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.584 (still bad) 2009-Apr-30 18:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.587 (still bad) 2009-Apr-30 18:40:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:40:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:40:57 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-30 18:40:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:40:57 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-30 18:40:57 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-30 18:40:57 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-30 18:40:57 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-30 18:40:57 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:40:57 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:40:57 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:40:57 LOG2 antvel: Parameters to Doppler: Topocentric 81657 2009 120 0.0 2009-Apr-30 18:40:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:40:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-30 18:40:57 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-30 18:40:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:40:57 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:40:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-30 18:40:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:40:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-30 18:40:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:40:57 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-30 18:40:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-30 18:40:57 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.832373 2009.3306733401778 18.999933 2009-Apr-30 18:40:57 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666694 20.561666666666671 2009-Apr-30 18:40:57 LOG4 log_alfabeam: ALFABEAM 1 8.770383120342730 20.469318101386740 2009-Apr-30 18:40:57 LOG4 log_alfabeam: ALFABEAM 2 8.773248170349582 20.557367459083505 2009-Apr-30 18:40:57 LOG4 log_alfabeam: ALFABEAM 3 8.769693155066745 20.651074806966832 2009-Apr-30 18:40:57 LOG4 log_alfabeam: ALFABEAM 4 8.762843833117978 20.653323183166876 2009-Apr-30 18:40:57 LOG4 log_alfabeam: ALFABEAM 5 8.759992452907174 20.561985762941546 2009-Apr-30 18:40:57 LOG4 log_alfabeam: ALFABEAM 6 8.763972430428215 20.471780459955724 2009-Apr-30 18:40:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000148 2009-Apr-30 18:40:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:40:58 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-30 18:40:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:40:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-30 18:40:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:40:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:40:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:40:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-30 18:40:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81659.00 2009-Apr-30 18:40:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.583 (still bad) 2009-Apr-30 18:41:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:41:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:41:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:41:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:41:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:41:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.576 (still bad) 2009-Apr-30 18:41:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.578 (still bad) 2009-Apr-30 18:41:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.576 (still bad) 2009-Apr-30 18:41:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.584 (still bad) 2009-Apr-30 18:41:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.575 (still bad) 2009-Apr-30 18:41:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:41:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:41:09 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-30 18:41:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:41:09 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-30 18:41:09 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-30 18:41:09 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-30 18:41:09 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-30 18:41:09 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:41:09 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:41:09 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:41:09 LOG2 antvel: Parameters to Doppler: Topocentric 81669 2009 120 0.0 2009-Apr-30 18:41:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:41:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-30 18:41:09 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-30 18:41:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:41:09 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:41:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-30 18:41:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:41:09 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-30 18:41:09 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:41:09 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-30 18:41:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-30 18:41:09 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.835716 2009.330673720435 18.999933 2009-Apr-30 18:41:09 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666753 20.561666666666678 2009-Apr-30 18:41:09 LOG4 log_alfabeam: ALFABEAM 1 8.770508684549306 20.470337250726299 2009-Apr-30 18:41:09 LOG4 log_alfabeam: ALFABEAM 2 8.773253206862673 20.559152690306195 2009-Apr-30 18:41:09 LOG4 log_alfabeam: ALFABEAM 3 8.769569411890402 20.651874364407629 2009-Apr-30 18:41:09 LOG4 log_alfabeam: ALFABEAM 4 8.762719836014050 20.652280580960575 2009-Apr-30 18:41:09 LOG4 log_alfabeam: ALFABEAM 5 8.759993566457009 20.560204782539593 2009-Apr-30 18:41:09 LOG4 log_alfabeam: ALFABEAM 6 8.764094259248159 20.471073082211280 2009-Apr-30 18:41:09 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000149 2009-Apr-30 18:41:10 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:41:10 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-30 18:41:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:41:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-30 18:41:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:41:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:41:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:41:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-30 18:41:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81671.00 2009-Apr-30 18:41:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.575 (still bad) 2009-Apr-30 18:41:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:41:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:41:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:41:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:41:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:41:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.572 (still bad) 2009-Apr-30 18:41:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.570 (still bad) 2009-Apr-30 18:41:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.571 (still bad) 2009-Apr-30 18:41:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.577 (still bad) 2009-Apr-30 18:41:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:41:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.568 (still bad) 2009-Apr-30 18:41:21 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:41:21 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-30 18:41:21 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:41:21 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-30 18:41:21 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-30 18:41:21 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-30 18:41:21 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-30 18:41:21 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:41:21 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:41:21 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:41:21 LOG2 antvel: Parameters to Doppler: Topocentric 81681 2009 120 0.0 2009-Apr-30 18:41:21 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:41:21 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-30 18:41:21 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-30 18:41:21 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:41:21 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:41:21 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-30 18:41:21 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:41:21 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-30 18:41:21 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:41:21 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-30 18:41:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-30 18:41:21 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.839058 2009.330674100692 18.999933 2009-Apr-30 18:41:21 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666728 20.561666666666678 2009-Apr-30 18:41:21 LOG4 log_alfabeam: ALFABEAM 1 8.770631022040577 20.471374357692785 2009-Apr-30 18:41:21 LOG4 log_alfabeam: ALFABEAM 2 8.773255783914383 20.560913231276526 2009-Apr-30 18:41:21 LOG4 log_alfabeam: ALFABEAM 3 8.769446397290249 20.652629130145499 2009-Apr-30 18:41:21 LOG4 log_alfabeam: ALFABEAM 4 8.762599106514926 20.651221231233933 2009-Apr-30 18:41:21 LOG4 log_alfabeam: ALFABEAM 5 8.759997032159816 20.558451596762524 2009-Apr-30 18:41:21 LOG4 log_alfabeam: ALFABEAM 6 8.764215143026926 20.470408085959996 2009-Apr-30 18:41:21 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000150 2009-Apr-30 18:41:22 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:41:22 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-30 18:41:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:41:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-30 18:41:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:41:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:41:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:41:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-30 18:41:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81683.00 2009-Apr-30 18:41:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.568 (still bad) 2009-Apr-30 18:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:41:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.558 (still bad) 2009-Apr-30 18:41:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.555 (still bad) 2009-Apr-30 18:41:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.554 (still bad) 2009-Apr-30 18:41:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.564 (still bad) 2009-Apr-30 18:41:33 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:41:33 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:41:33 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-30 18:41:33 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:41:33 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-30 18:41:33 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-30 18:41:33 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-30 18:41:33 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-30 18:41:33 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:41:33 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:41:33 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:41:33 LOG2 antvel: Parameters to Doppler: Topocentric 81693 2009 120 0.0 2009-Apr-30 18:41:33 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:41:33 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-30 18:41:33 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-30 18:41:33 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:41:33 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:41:33 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-30 18:41:33 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:41:33 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-30 18:41:33 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:41:33 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-30 18:41:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-30 18:41:33 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.842401 2009.330674480949 18.999933 2009-Apr-30 18:41:33 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666691 20.561666666666671 2009-Apr-30 18:41:33 LOG4 log_alfabeam: ALFABEAM 1 8.770750179394440 20.472427850889680 2009-Apr-30 18:41:33 LOG4 log_alfabeam: ALFABEAM 2 8.773256004114332 20.562648808888927 2009-Apr-30 18:41:33 LOG4 log_alfabeam: ALFABEAM 3 8.769324174868038 20.653340439379718 2009-Apr-30 18:41:33 LOG4 log_alfabeam: ALFABEAM 4 8.762481593341851 20.650146692138811 2009-Apr-30 18:41:33 LOG4 log_alfabeam: ALFABEAM 5 8.760002741238855 20.556726328542954 2009-Apr-30 18:41:33 LOG4 log_alfabeam: ALFABEAM 6 8.764335031552715 20.469784080359620 2009-Apr-30 18:41:33 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000151 2009-Apr-30 18:41:34 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:41:34 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-30 18:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.556 (still bad) 2009-Apr-30 18:41:34 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:41:34 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-30 18:41:34 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:41:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:41:34 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:41:34 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-30 18:41:34 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81695.00 2009-Apr-30 18:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.554 (still bad) 2009-Apr-30 18:41:36 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.530 (still bad) 2009-Apr-30 18:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.528 (still bad) 2009-Apr-30 18:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.526 (still bad) 2009-Apr-30 18:41:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:41:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.434 1.239 1.439 1.438 2009-Apr-30 18:41:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.396 1.343 1.484 1.492 2009-Apr-30 18:41:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.532 1.315 1.449 1.215 2009-Apr-30 18:41:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.318 0.104 1.446 0.129 2009-Apr-30 18:41:45 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:41:45 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:41:45 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-30 18:41:45 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:41:45 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-30 18:41:45 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-30 18:41:45 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-30 18:41:45 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-30 18:41:45 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:41:45 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33067 J 2009-Apr-30 18:41:45 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:41:45 LOG2 antvel: Parameters to Doppler: Topocentric 81705 2009 120 0.0 2009-Apr-30 18:41:45 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:41:45 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-30 18:41:45 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-30 18:41:45 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:41:45 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:41:45 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-30 18:41:45 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:41:45 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-30 18:41:45 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:41:45 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-30 18:41:45 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-30 18:41:45 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.845743 2009.330674861206 18.999933 2009-Apr-30 18:41:45 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666698 20.561666666666671 2009-Apr-30 18:41:45 LOG4 log_alfabeam: ALFABEAM 1 8.770866070294558 20.473494963576435 2009-Apr-30 18:41:45 LOG4 log_alfabeam: ALFABEAM 2 8.773253971099695 20.564357203515858 2009-Apr-30 18:41:45 LOG4 log_alfabeam: ALFABEAM 3 8.769202945637973 20.654008848780968 2009-Apr-30 18:41:45 LOG4 log_alfabeam: ALFABEAM 4 8.762367376335167 20.649059737416341 2009-Apr-30 18:41:45 LOG4 log_alfabeam: ALFABEAM 5 8.760010577853143 20.555031032151522 2009-Apr-30 18:41:45 LOG4 log_alfabeam: ALFABEAM 6 8.764453739945798 20.469200365394901 2009-Apr-30 18:41:45 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000152 2009-Apr-30 18:41:46 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:41:46 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-30 18:41:46 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:41:46 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-30 18:41:46 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:41:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:41:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.527 (still bad) 2009-Apr-30 18:41:46 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-30 18:41:46 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81707.00 2009-Apr-30 18:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:41:48 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.527 (still bad) 2009-Apr-30 18:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.524 (still bad) 2009-Apr-30 18:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.521 (still bad) 2009-Apr-30 18:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.522 (still bad) 2009-Apr-30 18:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.529 (still bad) 2009-Apr-30 18:41:57 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:41:57 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:41:57 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-30 18:41:57 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:41:57 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-30 18:41:57 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-30 18:41:57 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-30 18:41:57 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-30 18:41:57 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:41:57 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33068 J 2009-Apr-30 18:41:57 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:41:57 LOG2 antvel: Parameters to Doppler: Topocentric 81717 2009 120 0.0 2009-Apr-30 18:41:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:41:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-30 18:41:57 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-30 18:41:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:41:57 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:41:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-30 18:41:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:41:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-30 18:41:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-30 18:41:57 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-30 18:41:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-30 18:41:57 LOG5 log_alfabeam: Parameters: 8.7666666666666675 20.561666666666667 8.849086 2009.330675241463 18.999933 2009-Apr-30 18:41:57 LOG4 log_alfabeam: ALFABEAM 0 8.766666666666698 20.561666666666671 2009-Apr-30 18:41:57 LOG4 log_alfabeam: ALFABEAM 1 8.770978759956558 20.474574261241585 2009-Apr-30 18:41:57 LOG4 log_alfabeam: ALFABEAM 2 8.773249789378397 20.566038398149743 2009-Apr-30 18:41:57 LOG4 log_alfabeam: ALFABEAM 3 8.769082755556052 20.654635827163101 2009-Apr-30 18:41:57 LOG4 log_alfabeam: ALFABEAM 4 8.762256385985225 20.647961778918962 2009-Apr-30 18:41:57 LOG4 log_alfabeam: ALFABEAM 5 8.760020433413649 20.553365570080594 2009-Apr-30 18:41:57 LOG4 log_alfabeam: ALFABEAM 6 8.764571235445960 20.468655449336630 2009-Apr-30 18:41:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 912000153 2009-Apr-30 18:41:58 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-30 18:41:58 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-30 18:41:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:41:58 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-30 18:41:58 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:41:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:41:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:41:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-30 18:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.523 (still bad) 2009-Apr-30 18:41:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81719.00 2009-Apr-30 18:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:42:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.523 (still bad) 2009-Apr-30 18:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.520 (still bad) 2009-Apr-30 18:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.515 (still bad) 2009-Apr-30 18:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.515 (still bad) 2009-Apr-30 18:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.524 (still bad) 2009-Apr-30 18:42:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:42:09 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-30 18:42:09 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-30 18:42:09 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-30 18:42:09 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-30 18:42:09 INFO2 smartfreq: Switching off CAL 2009-Apr-30 18:42:09 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-30 18:42:09 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-30 18:42:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-30 18:42:09 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-30 18:42:09 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-30 18:42:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-30 18:42:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-30 18:42:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-30 18:42:09 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-30 18:42:09 INFO3 restore_frequencies: Restoring original frequencies 2009-Apr-30 18:42:09 LOG5 antvel: Calling 'antvel 84600.000000 203342.000000 J Topocentric 0' 2009-Apr-30 18:42:09 LOG2 antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33068 J 2009-Apr-30 18:42:09 LOG2 antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:42:09 LOG2 antvel: Parameters to Doppler: Topocentric 81729 2009 120 0.0 2009-Apr-30 18:42:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:42:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-30 18:42:09 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-30 18:42:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:42:09 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:42:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-30 18:42:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:42:09 STOP finish_task: Finishing task 'smart frequency switching' 2009-Apr-30 18:42:09 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-30 18:42:09 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Apr-30 18:42:09 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-30 18:42:09 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Apr-30 18:42:09 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-30 18:42:09 NOTE run_command_file: DONE with command file processing 2009-Apr-30 18:42:09 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-30 18:42:10 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-30 18:42:10 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-30 18:42:10 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Apr-30 18:42:10 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-30 18:42:10 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Apr-30 18:42:10 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-30 18:42:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-30 18:42:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:42:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:42:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.518 (still bad) 2009-Apr-30 18:42:16 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-30 18:42:16 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-30 18:42:16 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-30 18:42:16 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-30 18:42:16 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-30 18:42:16 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-30 18:42:16 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-30 18:42:16 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-30 18:42:16 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-30 18:42:16 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-30 18:42:16 LOG3 exec_msg: Closing socket 2009-Apr-30 18:42:16 LOG3 exec_msg: Closing socket 2009-Apr-30 18:42:16 LOG3 exec_msg: Closing socket 2009-Apr-30 18:42:16 LOG3 exec_msg: Closing socket 2009-Apr-30 18:42:19 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-30 18:42:19 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-30 18:42:19 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-30 18:42:19 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-30 18:42:34 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Apr-30 18:42:35 LOG2 CIMA-antvel: Precessing RA = 08:46:00.0 Dec = +20:33:42.0 Epoch = 2009.33068 J 2009-Apr-30 18:42:35 LOG2 CIMA-antvel: Computed apparent RA = 08:46:33.1 Dec = +20:31:39.5 2009-Apr-30 18:42:35 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 81755 2009 120 0.0 2009-Apr-30 18:42:35 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:42:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-30 18:42:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-30 18:42:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-30 18:42:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-30 18:42:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-30 18:42:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Apr-30 18:42:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-30 18:42:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-30 18:42:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-30 18:42:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-30 18:42:35 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-30 18:42:36 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-30 18:42:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-30 18:42:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-30 18:42:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-30 18:42:37 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Apr-30 18:42:37 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Apr-30 18:42:37 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-30 18:42:37 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-30 18:42:37 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-30 18:42:37 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-30 18:42:37 LOG1 config_iflo: Receiver ALFA already selected 2009-Apr-30 18:42:37 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-30 18:42:37 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-30 18:42:37 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-30 18:42:37 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-30 18:42:37 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-30 18:42:37 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-30 18:42:37 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-30 18:42:37 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-30 18:42:37 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-30 18:42:37 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Apr-30 18:42:37 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Apr-30 18:42:37 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-30 18:42:37 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-30 18:42:37 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Apr-30 18:42:37 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Apr-30 18:42:37 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Apr-30 18:42:37 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-30 18:42:37 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Apr-30 18:42:37 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Apr-30 18:42:37 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-30 18:42:37 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-30 18:42:37 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-30 18:42:37 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-30 18:42:37 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-30 18:42:37 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Apr-30 18:42:37 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Apr-30 18:42:37 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Apr-30 18:42:37 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Apr-30 18:42:37 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-30 18:42:37 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Apr-30 18:42:37 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Apr-30 18:42:37 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-30 18:42:37 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:42:37 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Apr-30 18:42:37 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Apr-30 18:42:37 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-30 18:42:37 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Apr-30 18:42:37 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Apr-30 18:42:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-30 18:42:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:42:37 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-30 18:42:37 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-30 18:42:37 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-30 18:42:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-30 18:42:37 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:42:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:42:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:42:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:42:38 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Apr-30 18:42:38 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-30 18:42:38 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-30 18:42:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-30 18:42:38 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-30 18:42:38 LOG5 finish_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-30 18:42:38 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-30 18:42:38 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-30 18:42:38 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-30 18:42:38 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-30 18:42:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:42:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-30 18:42:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-30 18:42:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-30 18:42:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-30 18:42:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-30 18:42:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-30 18:42:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-30 18:42:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-30 18:42:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-30 18:42:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-30 18:42:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-30 18:42:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-30 18:42:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-30 18:42:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-30 18:42:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-30 18:42:38 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-30 18:42:38 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-30 18:42:38 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-30 18:42:38 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-30 18:42:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-30 18:42:38 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-30 18:42:38 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-30 18:42:38 START begin_task: Starting task 'selecting calibration port' 2009-Apr-30 18:42:38 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-30 18:42:39 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-30 18:42:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-30 18:42:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:42:39 START begin_task: Starting task 'waiting on calport' 2009-Apr-30 18:42:39 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-30 18:42:39 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Apr-30 18:42:39 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-30 18:42:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:42:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:42:39 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-30 18:42:39 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-30 18:42:39 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-30 18:42:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-30 18:42:39 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-30 18:42:39 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-30 18:42:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-30 18:42:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-30 18:42:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-30 18:42:39 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-30 18:42:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:42:39 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-30 18:42:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-30 18:42:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-30 18:42:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-30 18:42:39 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-30 18:42:39 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-30 18:42:39 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-30 18:42:39 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-30 18:42:39 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-30 18:42:39 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-30 18:42:39 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-30 18:42:39 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-30 18:42:39 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-30 18:42:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:42:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:42:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:42:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:42:39 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-30 18:42:39 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-30 18:42:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-30 18:42:39 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-30 18:42:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-30 18:42:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-30 18:42:39 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-30 18:42:39 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-30 18:42:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-30 18:42:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-30 18:42:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-30 18:42:39 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-30 18:42:39 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-30 18:42:39 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-30 18:42:39 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-30 18:42:39 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-30 18:42:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-30 18:42:39 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-30 18:42:39 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-30 18:42:39 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-30 18:42:40 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Apr-30 18:42:40 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Apr-30 18:42:40 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-30 18:42:40 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-30 18:42:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-30 18:42:40 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-30 18:42:40 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-30 18:42:40 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-30 18:42:40 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-30 18:42:40 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-30 18:42:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-30 18:42:40 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-30 18:42:40 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-30 18:42:41 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-30 18:42:41 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-30 18:42:41 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Apr-30 18:43:01 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Apr-30 18:43:01 LOG4 exec_msg: From OBSERVER: track_new_source drift85p1 085330.0 +203342 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Apr-30 18:43:01 LOG1 track_new_source: Calling 'track_new_source drift85p1 085330.0 +203342 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Apr-30 18:43:01 BEGIN begin_task: Starting task 'selecting new source' 2009-Apr-30 18:43:01 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-30 18:43:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift85p1} INFO {Selecting source 'drift85p1' ...} 2009-Apr-30 18:43:01 LOG3 track_source: Calling 'track_source drift85p1 085330.0 +203342 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-30 18:43:01 START begin_task: Starting task 'sending tracking commands' 2009-Apr-30 18:43:01 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-30 18:43:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift85p1} INFO {Slewing to source 'drift85p1' ...} 2009-Apr-30 18:43:01 INFO1 track_source: Starting to track drift85p1 2009-Apr-30 18:43:01 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift85p1" 2009-Apr-30 18:43:01 LOG3 vw_send: To DATATAKING: set ra 085330.0 2009-Apr-30 18:43:01 LOG3 vw_send: To DATATAKING: set dec +203342 2009-Apr-30 18:43:01 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-30 18:43:01 LOG3 vw_send: To DATATAKING: pnt tr 085330.0 +203342 -CJ 2009-Apr-30 18:43:01 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-30 18:43:01 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-30 18:43:01 LOG5 finish_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-30 18:43:01 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-30 18:43:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-30 18:43:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-30 18:43:01 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-30 18:43:01 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Apr-30 18:43:01 START begin_task: Starting task 'applying pointing corrections' 2009-Apr-30 18:43:01 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-30 18:43:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Apr-30 18:43:01 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-30 18:43:01 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Apr-30 18:43:01 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-30 18:43:01 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Apr-30 18:43:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-30 18:43:01 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Apr-30 18:43:01 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-30 18:43:01 STOP finish_task: Finishing task 'selecting new source' 2009-Apr-30 18:43:01 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-30 18:43:01 DONE finish_task: DONE finished selecting: new source 2009-Apr-30 18:43:01 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-30 18:43:02 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Apr-30 18:43:02 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-30 18:43:02 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift85p1" 2009-Apr-30 18:43:02 LOG4 got_cormsg: From DATATAKING: set ra 085330.0 2009-Apr-30 18:43:02 LOG4 got_cormsg: From DATATAKING: set dec +203342 2009-Apr-30 18:43:02 LOG4 got_cormsg: From DATATAKING: vw% 085330.0 2009-Apr-30 18:43:02 LOG4 got_cormsg: From DATATAKING: vw% +203342 2009-Apr-30 18:43:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:43:02 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-30 18:43:02 LOG4 got_cormsg: From DATATAKING: pnt tr 085330.0 +203342 -CJ 2009-Apr-30 18:43:02 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-30 18:43:02 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-30 18:43:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:43:02 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-30 18:43:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:43:10 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-30 18:43:10 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-30 18:43:10 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-30 18:43:10 LOG5 begin_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-30 18:43:10 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-30 18:43:10 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-30 18:43:10 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-30 18:43:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-30 18:43:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:43:10 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-30 18:43:10 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-30 18:43:10 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-30 18:43:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:43:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:43:13 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-30 18:43:13 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-30 18:43:13 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-30 18:43:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-30 18:43:13 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-30 18:43:13 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-30 18:43:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-30 18:43:13 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-30 18:43:13 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-30 18:43:13 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-30 18:43:13 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-30 18:43:13 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-30 18:43:13 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-30 18:43:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-30 18:43:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:43:14 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-30 18:43:14 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 2 dB 2009-Apr-30 18:43:14 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-30 18:43:14 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-30 18:43:14 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-30 18:43:14 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-30 18:43:14 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-30 18:43:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.028 0.902 ALFA beam 1: 1.038 1.045 2009-Apr-30 18:43:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.984 0.963 ALFA beam 3: 1.043 1.056 2009-Apr-30 18:43:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.080 0.920 ALFA beam 5: 1.034 0.893 2009-Apr-30 18:43:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.906 0.102 ALFA beam 7: 1.002 0.126 2009-Apr-30 18:43:14 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-30 18:43:14 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-30 18:43:14 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-30 18:43:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-30 18:43:14 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-30 18:43:14 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-30 18:43:14 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-30 18:43:14 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-30 18:43:14 LOG5 finish_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-30 18:43:14 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-30 18:43:14 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-30 18:43:14 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-30 18:43:14 LOG5 end_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-30 18:43:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.102 < 0.75)! 2009-Apr-30 18:43:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 0.902 1.038 1.045 2009-Apr-30 18:43:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.984 0.963 1.043 1.056 2009-Apr-30 18:43:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.920 1.034 0.893 2009-Apr-30 18:43:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.906 0.102 1.002 0.126 2009-Apr-30 18:43:16 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-30 18:43:16 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift85p1 085330.0 +203342 J 0 Topocentric velocity(optical) 2009-Apr-30 18:43:16 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift85p1 085330.0 +203342 J 0 Topocentric velocity(optical)' 2009-Apr-30 18:43:16 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-30 18:43:16 LOG5 begin_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-30 18:43:16 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift85p1' 2009-Apr-30 18:43:16 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-30 18:43:16 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift85p1} 2009-Apr-30 18:43:16 INFO5 fixed_driftmap: Start: year = 2009.3306777448222 RA = 08:54:03.1 Dec = +20:31:34.7 2009-Apr-30 18:43:16 NOTE fixed_driftmap: Setting ZA to 2:10:21.0 ... 2009-Apr-30 18:43:16 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 2.17 2009-Apr-30 18:43:16 LOG3 track_source: Calling 'track_source drift85p1 180.0 2.1725001815 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-30 18:43:16 START begin_task: Starting task 'sending tracking commands' 2009-Apr-30 18:43:16 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-30 18:43:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift85p1} INFO {Slewing to source 'drift85p1' ...} 2009-Apr-30 18:43:16 INFO1 track_source: Starting to track drift85p1 2009-Apr-30 18:43:16 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift85p1" 2009-Apr-30 18:43:16 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-30 18:43:16 LOG3 vw_send: To DATATAKING: set dec 2.1725001815 2009-Apr-30 18:43:16 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-30 18:43:16 LOG3 vw_send: To DATATAKING: pnt tr 180.0 2.1725001815 -CF 2009-Apr-30 18:43:16 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-30 18:43:17 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-30 18:43:17 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-30 18:43:17 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-30 18:43:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-30 18:43:17 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-30 18:43:17 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-30 18:43:17 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-30 18:43:17 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-30 18:43:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-30 18:43:17 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-30 18:43:17 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-30 18:43:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-30 18:43:17 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-30 18:43:17 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-30 18:43:17 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift85p1" 2009-Apr-30 18:43:17 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-30 18:43:17 LOG4 got_cormsg: From DATATAKING: set dec 2.1725001815 2009-Apr-30 18:43:17 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-30 18:43:17 LOG4 got_cormsg: From DATATAKING: vw% 2.1725001815 2009-Apr-30 18:43:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:43:17 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-30 18:43:17 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 2.1725001815 -CF 2009-Apr-30 18:43:17 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-30 18:43:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-30 18:43:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:43:17 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-30 18:43:17 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-30 18:43:17 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-30 18:43:17 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-30 18:43:17 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-30 18:43:17 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-30 18:43:17 LOG5 finish_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-30 18:43:17 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-30 18:43:18 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-30 18:43:18 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-30 18:43:18 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-30 18:43:18 START begin_task: Starting task 'waiting on telescope' 2009-Apr-30 18:43:18 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-30 18:43:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-30 18:43:18 LOG3 waittrk: Start waittrk 5 2009-Apr-30 18:43:18 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-30 18:43:18 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-30 18:43:23 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-30 18:43:23 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-30 18:43:23 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-30 18:43:23 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-30 18:44:28 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-30 18:44:28 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-30 18:44:28 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-30 18:44:28 INFO2 waittrk: Now tracking drift85p1 2009-Apr-30 18:44:28 LOG4 waittrk: Current telescope position: Az = 179.85 ZA = 2.18 2009-Apr-30 18:44:28 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-30 18:44:28 LOG5 finish_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-30 18:44:28 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-30 18:44:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-30 18:44:28 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-30 18:44:28 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-30 18:44:28 START begin_task: Starting task 'selecting calibration type' 2009-Apr-30 18:44:28 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-30 18:44:29 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-30 18:44:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-30 18:44:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:44:29 START begin_task: Starting task 'waiting on setcal' 2009-Apr-30 18:44:29 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-30 18:44:29 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-30 18:44:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:44:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:44:29 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-30 18:44:29 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-30 18:44:29 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-30 18:44:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-30 18:44:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-30 18:44:29 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-30 18:44:29 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-30 18:44:29 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-30 18:44:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:44:29 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-30 18:44:29 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-30 18:44:29 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-30 18:44:29 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-30 18:44:29 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-30 18:44:29 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-30 18:44:29 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-30 18:44:29 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-30 18:44:29 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-30 18:44:30 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-30 18:44:30 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-30 18:44:30 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-30 18:44:30 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-30 18:44:30 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-30 18:44:30 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-30 18:44:30 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-30 18:44:30 LOG5 dopset_later: Calling 'dopset_later 33.868297258866122' 2009-Apr-30 18:44:30 INFO3 dopset_later: Setting Doppler correction for 18:45:03 (33.9 seconds from now) 2009-Apr-30 18:44:30 LOG5 antvel: Calling 'antvel 180.000000 2.172500 F Topocentric 33.868297258866122' 2009-Apr-30 18:44:30 LOG2 antvel: Transforming current Az = 180.00 ZA = 2.17 to apparent RA = 08:54:03.0 Dec = +20:31:34.7 2009-Apr-30 18:44:30 LOG2 antvel: Parameters to Doppler: Topocentric 81903 2009 120 0.0 2009-Apr-30 18:44:30 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-30 18:44:30 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-30 18:44:30 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-30 18:44:30 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-30 18:44:30 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-30 18:44:30 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-30 18:44:30 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:44:30 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-30 18:44:30 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-30 18:44:30 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-30 18:44:30 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-30 18:44:30 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-30 18:44:30 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-30 18:44:30 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:44:30 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-30 18:44:30 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-30 18:44:30 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-30 18:44:30 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-30 18:44:30 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-30 18:44:30 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:44:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:44:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:44:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:44:33 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-30 18:44:33 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-30 18:44:33 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-30 18:44:33 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-30 18:44:33 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-30 18:44:33 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-30 18:44:33 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-30 18:44:33 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-30 18:44:33 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-30 18:44:33 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-30 18:44:33 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-30 18:44:33 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-30 18:44:33 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-30 18:44:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:44:33 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-30 18:44:33 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-30 18:44:33 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 2 dB 2009-Apr-30 18:44:33 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-30 18:44:33 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-30 18:44:33 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-30 18:44:33 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-30 18:44:33 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-30 18:44:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.025 0.899 ALFA beam 1: 1.047 1.040 2009-Apr-30 18:44:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.991 0.954 ALFA beam 3: 1.069 1.075 2009-Apr-30 18:44:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.086 0.925 ALFA beam 5: 1.044 0.907 2009-Apr-30 18:44:33 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.920 0.104 ALFA beam 7: 1.010 0.129 2009-Apr-30 18:44:33 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-30 18:44:33 LOG5 finish_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-30 18:44:33 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-30 18:44:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-30 18:44:33 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-30 18:44:33 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-30 18:44:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-30 18:44:33 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-30 18:44:33 LOG5 finish_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-30 18:44:33 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-30 18:44:33 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-30 18:44:33 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-30 18:44:33 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-30 18:44:33 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 08:54:03.1 LST = 08:53:33.1 diff = 30.0 secs 2009-Apr-30 18:44:33 INFO2 fixed_driftmap: Waiting 28 seconds for RA 8:54:03 2009-Apr-30 18:44:33 INFO2 lstwait: Waiting for 27.9 secs from LST 08:53:33 to LST 08:54:01 ... 2009-Apr-30 18:44:33 LOG4 send_obs_status: To obs_status: <1> TASKTIME 27.874308055027988 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Apr-30 18:44:33 START begin_task: Starting task 'waiting on wait on LST' 2009-Apr-30 18:44:33 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-30 18:44:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:44:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 0.899 1.047 1.040 2009-Apr-30 18:44:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.991 0.954 1.069 1.075 2009-Apr-30 18:44:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.925 1.044 0.907 2009-Apr-30 18:44:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.104 1.010 0.129 2009-Apr-30 18:45:01 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Apr-30 18:45:01 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-30 18:45:01 LOG4 lstwait: Finished waiting 0.13 seconds late 2009-Apr-30 18:45:01 INFO3 lstwait: Finished waiting 2009-Apr-30 18:45:01 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-30 18:45:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:45:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:45:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:45:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:45:02 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Apr-30 18:45:02 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-30 18:45:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-30 18:45:02 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-30 18:45:02 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-30 18:45:02 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-30 18:45:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-30 18:45:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-30 18:45:02 INFO2 take_data: Starting WAPP 600-second scan: 912000154 2009-Apr-30 18:45:02 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-30 18:45:02 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-30 18:45:02 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-30 18:45:02 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:45:02 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-30 18:45:02 INFO1 WAPP=1+2+3+4-start_spectra: start sec 81903.00 2009-Apr-30 18:45:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20090430.a2010.0012.fits 2009-Apr-30 18:45:02 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090430.a2010.0012.fits} 2009-Apr-30 18:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:45:04 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:45:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:45:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:45:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:45:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:45:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:45:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:45:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:45:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:45:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:45:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:45:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:45:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:45:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.090 (still bad) 2009-Apr-30 18:45:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:45:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:45:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 0.896 1.045 1.038 2009-Apr-30 18:45:37 LOG4 check_wapp_levels: WAPP-2 power levels: 0.990 0.950 1.067 1.070 2009-Apr-30 18:45:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.926 1.040 0.905 2009-Apr-30 18:45:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.104 1.007 0.128 2009-Apr-30 18:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-30 18:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-30 18:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-30 18:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:46:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:46:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:46:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:46:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:46:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.020 0.899 1.044 1.039 2009-Apr-30 18:46:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.989 0.951 1.070 1.073 2009-Apr-30 18:46:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.085 0.926 1.040 0.905 2009-Apr-30 18:46:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.104 1.007 0.128 2009-Apr-30 18:46:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:46:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:46:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:46:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:46:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:46:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-30 18:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.081 (still bad) 2009-Apr-30 18:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-30 18:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-30 18:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.090 (still bad) 2009-Apr-30 18:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-30 18:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:47:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-30 18:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-30 18:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:47:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:47:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.019 0.895 1.041 1.039 2009-Apr-30 18:47:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.990 0.948 1.067 1.070 2009-Apr-30 18:47:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.922 1.039 0.903 2009-Apr-30 18:47:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.104 1.005 0.128 2009-Apr-30 18:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-30 18:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.081 (still bad) 2009-Apr-30 18:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:48:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:48:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:48:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:48:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-30 18:48:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:48:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:48:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:48:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:48:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-30 18:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:48:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.081 (still bad) 2009-Apr-30 18:48:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:48:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:48:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 0.895 1.042 1.042 2009-Apr-30 18:48:41 LOG4 check_wapp_levels: WAPP-2 power levels: 0.990 0.950 1.067 1.074 2009-Apr-30 18:48:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.927 1.038 0.906 2009-Apr-30 18:48:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.916 0.104 1.006 0.128 2009-Apr-30 18:48:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:48:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:48:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-30 18:48:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:48:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:48:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:48:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:48:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:48:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.083 (still bad) 2009-Apr-30 18:49:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.082 (still bad) 2009-Apr-30 18:49:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:49:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:49:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:49:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:49:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:49:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:49:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:49:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:49:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:49:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:49:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:49:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:49:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:49:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:49:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:49:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.090 (still bad) 2009-Apr-30 18:49:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:49:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:49:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:49:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 0.897 1.045 1.046 2009-Apr-30 18:49:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.990 0.952 1.067 1.075 2009-Apr-30 18:49:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.086 0.929 1.039 0.907 2009-Apr-30 18:49:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.104 1.006 0.129 2009-Apr-30 18:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:49:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:49:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:49:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:49:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:49:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:50:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:50:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.084 (still bad) 2009-Apr-30 18:50:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:50:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:50:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:50:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:50:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:50:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:50:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:50:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:50:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:50:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:50:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.085 (still bad) 2009-Apr-30 18:50:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:50:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:50:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 0.900 1.046 1.045 2009-Apr-30 18:50:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.992 0.954 1.069 1.080 2009-Apr-30 18:50:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.087 0.932 1.043 0.910 2009-Apr-30 18:50:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.104 1.006 0.129 2009-Apr-30 18:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.090 (still bad) 2009-Apr-30 18:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:51:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.086 (still bad) 2009-Apr-30 18:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.090 (still bad) 2009-Apr-30 18:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:51:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:51:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:51:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:51:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:51:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.091 (still bad) 2009-Apr-30 18:51:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.090 (still bad) 2009-Apr-30 18:51:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:51:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 0.903 1.047 1.048 2009-Apr-30 18:51:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.995 0.957 1.071 1.078 2009-Apr-30 18:51:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.090 0.933 1.044 0.912 2009-Apr-30 18:51:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.104 1.005 0.129 2009-Apr-30 18:51:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.091 (still bad) 2009-Apr-30 18:51:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:51:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:51:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.091 (still bad) 2009-Apr-30 18:51:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.090 (still bad) 2009-Apr-30 18:51:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.090 (still bad) 2009-Apr-30 18:51:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.090 (still bad) 2009-Apr-30 18:52:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.087 (still bad) 2009-Apr-30 18:52:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:52:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:52:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:52:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:52:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.090 (still bad) 2009-Apr-30 18:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.088 (still bad) 2009-Apr-30 18:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.091 (still bad) 2009-Apr-30 18:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.090 (still bad) 2009-Apr-30 18:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.090 (still bad) 2009-Apr-30 18:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.091 (still bad) 2009-Apr-30 18:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.091 (still bad) 2009-Apr-30 18:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-30 18:52:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.117 (still bad) 2009-Apr-30 18:52:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.123 (still bad) 2009-Apr-30 18:52:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.125 (still bad) 2009-Apr-30 18:52:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:52:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 0.906 1.053 1.054 2009-Apr-30 18:52:46 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.960 1.124 1.126 2009-Apr-30 18:52:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.937 1.047 0.911 2009-Apr-30 18:52:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.104 1.010 0.129 2009-Apr-30 18:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.118 (still bad) 2009-Apr-30 18:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-30 18:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 18:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.090 (still bad) 2009-Apr-30 18:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 18:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 18:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 18:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 18:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 18:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 18:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 18:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.091 (still bad) 2009-Apr-30 18:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.091 (still bad) 2009-Apr-30 18:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 18:53:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 18:53:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:53:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:53:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:53:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.089 (still bad) 2009-Apr-30 18:53:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:53:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:53:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:53:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:53:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:53:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:53:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:53:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:53:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 0.904 1.048 1.050 2009-Apr-30 18:53:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.991 0.957 1.078 1.081 2009-Apr-30 18:53:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.940 1.052 0.921 2009-Apr-30 18:53:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.926 0.104 1.016 0.129 2009-Apr-30 18:53:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 18:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 18:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 18:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 18:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-30 18:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 18:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 18:54:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 18:54:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:54:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 18:54:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 18:54:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 18:54:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 18:54:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 18:54:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 18:54:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 18:54:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 18:54:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 18:54:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 18:54:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 18:54:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 18:54:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 18:54:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:54:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:54:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 0.901 1.047 1.052 2009-Apr-30 18:54:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.992 0.956 1.073 1.076 2009-Apr-30 18:54:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.933 1.045 0.914 2009-Apr-30 18:54:49 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.104 1.006 0.129 2009-Apr-30 18:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.091 (still bad) 2009-Apr-30 18:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:54:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:55:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:55:03 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:55:03 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-30 18:55:03 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-30 18:55:03 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-30 18:55:03 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-30 18:55:03 LOG1 fixed_driftmap: New position: year = 2009.3307001483001 RA = 09:03:32.7 RA/Dec = 09:04:05.7 +20:31:28.5 2009-Apr-30 18:55:03 NOTE fixed_driftmap: Correcting ZA to 2:10:14.8 ... 2009-Apr-30 18:55:03 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.1707887791 -CF 2009-Apr-30 18:55:03 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-30 18:55:03 START begin_task: Starting task 'WAPP calibration' 2009-Apr-30 18:55:03 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-30 18:55:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-30 18:55:03 START begin_task: Starting task 'selecting calibration type' 2009-Apr-30 18:55:03 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-30 18:55:03 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-30 18:55:03 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-30 18:55:03 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:55:03 START begin_task: Starting task 'waiting on setcal' 2009-Apr-30 18:55:03 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-30 18:55:03 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.1707887791 -CF 2009-Apr-30 18:55:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:55:03 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-30 18:55:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:55:03 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 18:55:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:55:03 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-30 18:55:03 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-30 18:55:03 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-30 18:55:03 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-30 18:55:03 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-30 18:55:03 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-30 18:55:03 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-30 18:55:03 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-30 18:55:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 18:55:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-30 18:55:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-30 18:55:04 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-30 18:55:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-30 18:55:04 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-30 18:55:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-30 18:55:04 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-30 18:55:04 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-30 18:55:04 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-30 18:55:04 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-30 18:55:04 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-30 18:55:04 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-30 18:55:04 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-30 18:55:04 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-30 18:55:04 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-30 18:55:04 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-30 18:55:04 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-30 18:55:04 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-30 18:55:04 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-30 18:55:04 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-30 18:55:04 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-30 18:55:04 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-30 18:55:04 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-30 18:55:04 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-30 18:55:04 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-30 18:55:04 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-30 18:55:04 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-30 18:55:04 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-30 18:55:04 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-30 18:55:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-30 18:55:04 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-30 18:55:04 INFO2 take_data: Starting WAPP 1-second scan: 912000155 2009-Apr-30 18:55:04 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-30 18:55:04 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-30 18:55:04 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:55:04 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-30 18:55:04 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82505.00 2009-Apr-30 18:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:55:06 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:55:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 18:55:06 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-30 18:55:06 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-30 18:55:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-30 18:55:06 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-30 18:55:06 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-30 18:55:06 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-30 18:55:06 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-30 18:55:06 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-30 18:55:06 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-30 18:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.540 (still bad) 2009-Apr-30 18:55:07 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-30 18:55:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-30 18:55:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-30 18:55:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-30 18:55:07 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-30 18:55:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-30 18:55:07 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-30 18:55:07 LOG5 finish_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-30 18:55:07 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-30 18:55:07 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-30 18:55:07 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-30 18:55:07 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-30 18:55:07 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Apr-30 18:55:07 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-30 18:55:07 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:55:07 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:55:07 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:55:07 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-30 18:55:07 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-30 18:55:07 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-30 18:55:07 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-30 18:55:07 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-30 18:55:07 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-30 18:55:07 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-30 18:55:07 INFO2 take_data: Starting WAPP 600-second scan: 912000156 2009-Apr-30 18:55:07 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-30 18:55:07 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-30 18:55:07 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-30 18:55:07 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 18:55:07 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-30 18:55:07 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82508.00 2009-Apr-30 18:55:07 NOTE WAPPDATA-new_file: New FITS file: wapp.20090430.a2010.0013.fits 2009-Apr-30 18:55:07 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090430.a2010.0013.fits} 2009-Apr-30 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 18:55:09 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 18:55:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:55:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.091 (still bad) 2009-Apr-30 18:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:55:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-30 18:55:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:55:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:55:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:55:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:55:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:55:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 18:55:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:55:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:55:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 0.904 1.049 1.050 2009-Apr-30 18:55:50 LOG4 check_wapp_levels: WAPP-2 power levels: 0.995 0.958 1.078 1.079 2009-Apr-30 18:55:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.938 1.045 0.915 2009-Apr-30 18:55:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.914 0.104 1.002 0.129 2009-Apr-30 18:55:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:55:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.091 (still bad) 2009-Apr-30 18:55:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:55:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 18:56:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:56:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:56:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 18:56:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 18:56:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:56:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 18:56:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:56:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 18:56:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 18:56:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 18:56:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 18:56:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 18:56:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:56:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:56:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 18:56:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:56:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 18:56:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 18:56:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 18:56:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 18:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 18:56:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 18:56:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 18:56:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 18:56:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 18:56:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:56:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 0.906 1.057 1.061 2009-Apr-30 18:56:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.993 0.959 1.072 1.078 2009-Apr-30 18:56:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.939 1.054 0.925 2009-Apr-30 18:56:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.930 0.104 1.022 0.129 2009-Apr-30 18:56:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 18:56:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:56:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:56:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 18:57:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:57:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:57:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:57:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:57:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:57:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 18:57:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:57:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:57:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:57:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:57:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:57:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-30 18:57:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:57:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.092 (still bad) 2009-Apr-30 18:57:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:57:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:57:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:57:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 18:57:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:57:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:57:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 18:57:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:57:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:57:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 18:57:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:57:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:57:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:57:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 0.908 1.052 1.056 2009-Apr-30 18:57:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.995 0.961 1.078 1.083 2009-Apr-30 18:57:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.940 1.050 0.917 2009-Apr-30 18:57:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.920 0.104 1.008 0.129 2009-Apr-30 18:57:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:57:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 18:57:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-30 18:58:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:58:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:58:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 18:58:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:58:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:58:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 18:58:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:58:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:58:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 18:58:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:58:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 18:58:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 18:58:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 18:58:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:58:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 18:58:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:58:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:58:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 18:58:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:58:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:58:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 18:58:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:58:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 18:58:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.100 (still bad) 2009-Apr-30 18:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 18:58:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:58:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.029 0.905 1.054 1.059 2009-Apr-30 18:58:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 0.961 1.078 1.079 2009-Apr-30 18:58:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.943 1.047 0.915 2009-Apr-30 18:58:54 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.104 1.008 0.129 2009-Apr-30 18:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 18:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 18:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 18:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:59:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 18:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:59:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:59:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:59:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:59:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:59:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:59:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:59:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 18:59:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 18:59:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 18:59:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 18:59:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 0.908 1.060 1.062 2009-Apr-30 18:59:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 0.960 1.080 1.089 2009-Apr-30 18:59:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.944 1.048 0.917 2009-Apr-30 18:59:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.104 1.009 0.129 2009-Apr-30 18:59:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 18:59:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:00:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:00:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-30 19:00:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:00:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:00:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:00:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:00:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-30 19:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-30 19:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-30 19:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.093 (still bad) 2009-Apr-30 19:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 19:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 19:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 19:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 19:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 19:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-30 19:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 19:00:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 19:00:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 0.907 1.052 1.052 2009-Apr-30 19:00:57 LOG4 check_wapp_levels: WAPP-2 power levels: 0.995 0.960 1.076 1.082 2009-Apr-30 19:00:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.941 1.050 0.919 2009-Apr-30 19:00:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.917 0.104 1.008 0.129 2009-Apr-30 19:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-30 19:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-30 19:01:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 19:01:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:01:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.094 (still bad) 2009-Apr-30 19:01:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:01:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:01:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:01:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:01:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:01:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:01:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:01:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:01:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:01:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 19:01:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:01:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:01:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Apr-30 19:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.120 (still bad) 2009-Apr-30 19:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.126 (still bad) 2009-Apr-30 19:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.133 (still bad) 2009-Apr-30 19:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.136 (still bad) 2009-Apr-30 19:01:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 19:01:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 0.910 1.050 1.055 2009-Apr-30 19:01:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.995 0.960 1.080 1.088 2009-Apr-30 19:01:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.134 0.974 1.050 0.918 2009-Apr-30 19:01:58 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.104 1.009 0.129 2009-Apr-30 19:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.129 (still bad) 2009-Apr-30 19:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.120 (still bad) 2009-Apr-30 19:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Apr-30 19:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-30 19:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-30 19:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-30 19:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-30 19:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-30 19:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Apr-30 19:02:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-30 19:02:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-30 19:02:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-30 19:02:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:02:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:02:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:02:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:02:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:02:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:02:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:02:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:02:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:02:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:02:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:02:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:02:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:02:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 19:02:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 0.912 1.053 1.057 2009-Apr-30 19:02:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 0.963 1.075 1.081 2009-Apr-30 19:02:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.943 1.050 0.916 2009-Apr-30 19:02:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.918 0.104 1.008 0.129 2009-Apr-30 19:03:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:03:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 19:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-30 19:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:03:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:03:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:03:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:04:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:04:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 0.913 1.059 1.062 2009-Apr-30 19:04:00 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.967 1.080 1.087 2009-Apr-30 19:04:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.948 1.057 0.923 2009-Apr-30 19:04:00 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.105 1.014 0.129 2009-Apr-30 19:04:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:04:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:04:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:04:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:04:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:04:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-30 19:04:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:04:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:04:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:04:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:04:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:04:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:04:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-30 19:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:05:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 19:05:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 0.909 1.053 1.056 2009-Apr-30 19:05:02 LOG4 check_wapp_levels: WAPP-2 power levels: 0.995 0.961 1.075 1.081 2009-Apr-30 19:05:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.942 1.053 0.918 2009-Apr-30 19:05:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.104 1.012 0.129 2009-Apr-30 19:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 19:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:05:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 19:05:08 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-30 19:05:08 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-30 19:05:08 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-30 19:05:08 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-30 19:05:08 LOG1 fixed_driftmap: New position: year = 2009.3307193195933 RA = 09:13:39.4 RA/Dec = 09:14:12.3 +20:31:22.6 2009-Apr-30 19:05:08 NOTE fixed_driftmap: Correcting ZA to 2:10:08.9 ... 2009-Apr-30 19:05:08 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.1691346155 -CF 2009-Apr-30 19:05:08 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-30 19:05:08 START begin_task: Starting task 'WAPP calibration' 2009-Apr-30 19:05:08 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-30 19:05:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-30 19:05:08 START begin_task: Starting task 'selecting calibration type' 2009-Apr-30 19:05:08 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-30 19:05:08 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-30 19:05:08 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-30 19:05:08 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 19:05:08 START begin_task: Starting task 'waiting on setcal' 2009-Apr-30 19:05:08 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-30 19:05:08 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.1691346155 -CF 2009-Apr-30 19:05:08 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 19:05:08 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-30 19:05:08 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 19:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.095 (still bad) 2009-Apr-30 19:05:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 19:05:09 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-30 19:05:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-30 19:05:09 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-30 19:05:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-30 19:05:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-30 19:05:09 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-30 19:05:09 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-30 19:05:09 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-30 19:05:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 19:05:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-30 19:05:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-30 19:05:09 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-30 19:05:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-30 19:05:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-30 19:05:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-30 19:05:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-30 19:05:09 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-30 19:05:09 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-30 19:05:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-30 19:05:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-30 19:05:09 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-30 19:05:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-30 19:05:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-30 19:05:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-30 19:05:09 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-30 19:05:09 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-30 19:05:09 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-30 19:05:09 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-30 19:05:09 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-30 19:05:09 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-30 19:05:09 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-30 19:05:09 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-30 19:05:09 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-30 19:05:09 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-30 19:05:09 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-30 19:05:09 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-30 19:05:09 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-30 19:05:09 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-30 19:05:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-30 19:05:09 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-30 19:05:09 INFO2 take_data: Starting WAPP 1-second scan: 912000157 2009-Apr-30 19:05:09 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-30 19:05:09 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-30 19:05:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 19:05:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83110.00 2009-Apr-30 19:05:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-30 19:05:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 19:05:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:05:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 19:05:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 19:05:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:05:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:05:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 19:05:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 19:05:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:05:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 19:05:11 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-30 19:05:11 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-30 19:05:11 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-30 19:05:11 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-30 19:05:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-30 19:05:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-30 19:05:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-30 19:05:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-30 19:05:11 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-30 19:05:11 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-30 19:05:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-30 19:05:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-30 19:05:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-30 19:05:11 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-30 19:05:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-30 19:05:11 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-30 19:05:11 LOG5 finish_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-30 19:05:11 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-30 19:05:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-30 19:05:11 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-30 19:05:11 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-30 19:05:11 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2009-Apr-30 19:05:12 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2009-Apr-30 19:05:12 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-30 19:05:12 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-30 19:05:12 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-30 19:05:12 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-30 19:05:12 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-30 19:05:12 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-30 19:05:12 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-30 19:05:12 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-30 19:05:12 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-30 19:05:12 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-30 19:05:12 INFO2 take_data: Starting WAPP 600-second scan: 912000158 2009-Apr-30 19:05:12 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-30 19:05:12 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-30 19:05:12 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-30 19:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.549 (still bad) 2009-Apr-30 19:05:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 19:05:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83113.00 2009-Apr-30 19:05:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-30 19:05:12 NOTE WAPPDATA-new_file: New FITS file: wapp.20090430.a2010.0014.fits 2009-Apr-30 19:05:12 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090430.a2010.0014.fits} 2009-Apr-30 19:05:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 19:05:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:05:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 19:05:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 19:05:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:05:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:05:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 19:05:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 19:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.549 (still bad) 2009-Apr-30 19:05:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.096 (still bad) 2009-Apr-30 19:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:06:04 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 19:06:04 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 0.907 1.051 1.054 2009-Apr-30 19:06:04 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.963 1.073 1.082 2009-Apr-30 19:06:04 LOG4 check_wapp_levels: WAPP-3 power levels: 1.099 0.945 1.051 0.917 2009-Apr-30 19:06:04 LOG4 check_wapp_levels: WAPP-4 power levels: 0.919 0.104 1.009 0.129 2009-Apr-30 19:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:06:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.097 (still bad) 2009-Apr-30 19:06:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.098 (still bad) 2009-Apr-30 19:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:06:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.099 (still bad) 2009-Apr-30 19:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:07:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 19:07:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 0.911 1.053 1.055 2009-Apr-30 19:07:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.968 1.080 1.086 2009-Apr-30 19:07:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.944 1.052 0.916 2009-Apr-30 19:07:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.104 1.010 0.129 2009-Apr-30 19:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.130 (still bad) 2009-Apr-30 19:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-30 19:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.109 (still bad) 2009-Apr-30 19:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-30 19:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-30 19:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Apr-30 19:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.108 (still bad) 2009-Apr-30 19:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Apr-30 19:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.115 (still bad) 2009-Apr-30 19:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Apr-30 19:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.113 (still bad) 2009-Apr-30 19:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.119 (still bad) 2009-Apr-30 19:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Apr-30 19:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-30 19:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-30 19:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:07:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-30 19:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Apr-30 19:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:08:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 19:08:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 0.910 1.056 1.057 2009-Apr-30 19:08:06 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.963 1.077 1.083 2009-Apr-30 19:08:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.104 0.945 1.058 0.922 2009-Apr-30 19:08:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.921 0.104 1.011 0.129 2009-Apr-30 19:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-30 19:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.110 (still bad) 2009-Apr-30 19:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-30 19:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.111 (still bad) 2009-Apr-30 19:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-30 19:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-30 19:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-30 19:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-30 19:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.112 (still bad) 2009-Apr-30 19:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-30 19:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:08:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:09:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 19:09:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 0.910 1.052 1.056 2009-Apr-30 19:09:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.965 1.079 1.087 2009-Apr-30 19:09:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.947 1.055 0.922 2009-Apr-30 19:09:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.104 1.013 0.129 2009-Apr-30 19:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-30 19:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-30 19:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:09:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-30 19:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:10:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 19:10:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 0.918 1.072 1.074 2009-Apr-30 19:10:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.966 1.078 1.086 2009-Apr-30 19:10:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.945 1.058 0.920 2009-Apr-30 19:10:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.104 1.013 0.129 2009-Apr-30 19:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-30 19:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-30 19:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-30 19:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-30 19:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-30 19:11:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 19:11:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 0.911 1.052 1.054 2009-Apr-30 19:11:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.961 1.076 1.088 2009-Apr-30 19:11:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.103 0.943 1.061 0.925 2009-Apr-30 19:11:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.104 1.012 0.129 2009-Apr-30 19:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-30 19:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-30 19:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-30 19:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-30 19:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-30 19:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-30 19:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-30 19:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.106 (still bad) 2009-Apr-30 19:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-30 19:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.100 (still bad) 2009-Apr-30 19:11:54 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.101 (still bad) 2009-Apr-30 19:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.102 (still bad) 2009-Apr-30 19:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.103 (still bad) 2009-Apr-30 19:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.104 (still bad) 2009-Apr-30 19:12:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-30 19:12:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 0.912 1.059 1.064 2009-Apr-30 19:12:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.963 1.074 1.089 2009-Apr-30 19:12:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.102 0.943 1.054 0.918 2009-Apr-30 19:12:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.923 0.104 1.012 0.129 2009-Apr-30 19:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-30 19:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-30 19:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-30 19:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-30 19:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-30 19:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-30 19:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-30 19:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:12:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:13:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:13:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 0.918 1.054 1.059 2009-Apr-30 19:13:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.965 1.080 1.091 2009-Apr-30 19:13:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.949 1.056 0.921 2009-Apr-30 19:13:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.105 1.014 0.130 2009-Apr-30 19:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-30 19:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.105 (still bad) 2009-Apr-30 19:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-30 19:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.104 and 1.107 (still bad) 2009-Apr-30 19:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:13:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-30 19:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-30 19:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-30 19:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:14:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:14:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 0.921 1.063 1.065 2009-Apr-30 19:14:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.971 1.084 1.098 2009-Apr-30 19:14:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 0.951 1.061 0.927 2009-Apr-30 19:14:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.105 1.017 0.130 2009-Apr-30 19:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-30 19:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-30 19:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-30 19:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:15:13 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 19:15:13 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-30 19:15:13 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-30 19:15:13 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-30 19:15:13 LOG5 end_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-30 19:15:13 LOG1 fixed_driftmap: New position: year = 2009.3307384908865 RA = 09:23:46.2 RA/Dec = 09:24:19.0 +20:31:16.9 2009-Apr-30 19:15:13 NOTE fixed_driftmap: Correcting ZA to 2:10:03.2 ... 2009-Apr-30 19:15:13 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.1675527176 -CF 2009-Apr-30 19:15:13 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-30 19:15:13 START begin_task: Starting task 'WAPP calibration' 2009-Apr-30 19:15:13 LOG5 begin_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-30 19:15:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-30 19:15:13 START begin_task: Starting task 'selecting calibration type' 2009-Apr-30 19:15:13 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-30 19:15:13 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-30 19:15:13 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-30 19:15:13 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 19:15:13 START begin_task: Starting task 'waiting on setcal' 2009-Apr-30 19:15:13 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-30 19:15:13 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.1675527176 -CF 2009-Apr-30 19:15:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 19:15:13 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-30 19:15:13 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 19:15:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 19:15:13 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-30 19:15:13 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-30 19:15:13 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-30 19:15:13 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-30 19:15:13 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-30 19:15:13 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-30 19:15:13 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-30 19:15:13 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-30 19:15:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 19:15:14 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-30 19:15:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-30 19:15:14 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-30 19:15:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-30 19:15:14 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-30 19:15:14 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-30 19:15:14 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-30 19:15:14 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-30 19:15:14 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-30 19:15:14 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-30 19:15:14 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-30 19:15:14 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-30 19:15:14 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-30 19:15:14 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-30 19:15:14 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-30 19:15:14 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-30 19:15:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-30 19:15:14 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-30 19:15:14 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-30 19:15:14 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-30 19:15:14 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-30 19:15:14 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-30 19:15:14 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-30 19:15:14 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-30 19:15:14 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-30 19:15:14 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-30 19:15:14 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-30 19:15:14 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-30 19:15:14 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-30 19:15:14 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-30 19:15:14 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-30 19:15:14 INFO2 take_data: Starting WAPP 1-second scan: 912000159 2009-Apr-30 19:15:14 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-30 19:15:14 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-30 19:15:14 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 19:15:14 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-30 19:15:14 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83715.00 2009-Apr-30 19:15:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:15:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 0.918 1.056 1.058 2009-Apr-30 19:15:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.966 1.080 1.095 2009-Apr-30 19:15:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.955 1.059 0.923 2009-Apr-30 19:15:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.105 1.014 0.130 2009-Apr-30 19:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 19:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 19:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 19:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 19:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 19:15:16 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:15:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 19:15:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-30 19:15:16 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-30 19:15:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-30 19:15:16 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-30 19:15:16 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-30 19:15:16 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-30 19:15:16 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-30 19:15:16 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-30 19:15:16 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-30 19:15:17 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-30 19:15:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-30 19:15:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-30 19:15:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-30 19:15:17 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-30 19:15:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-30 19:15:17 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-30 19:15:17 LOG5 finish_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-30 19:15:17 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-30 19:15:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-30 19:15:17 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-30 19:15:17 LOG5 end_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-30 19:15:17 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2009-Apr-30 19:15:17 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2009-Apr-30 19:15:17 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-30 19:15:17 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-30 19:15:17 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-30 19:15:17 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-30 19:15:17 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-30 19:15:17 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-30 19:15:17 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-30 19:15:17 LOG5 begin_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-30 19:15:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-30 19:15:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-30 19:15:17 INFO2 take_data: Starting WAPP 600-second scan: 912000160 2009-Apr-30 19:15:17 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-30 19:15:17 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-30 19:15:17 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-30 19:15:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 19:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.563 (still bad) 2009-Apr-30 19:15:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-30 19:15:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83718.00 2009-Apr-30 19:15:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20090430.a2010.0015.fits 2009-Apr-30 19:15:18 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090430.a2010.0015.fits} 2009-Apr-30 19:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 19:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 19:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 19:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 19:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 19:15:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.563 (still bad) 2009-Apr-30 19:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:15:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:16:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:16:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 0.917 1.055 1.060 2009-Apr-30 19:16:16 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.966 1.080 1.095 2009-Apr-30 19:16:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.108 0.949 1.060 0.922 2009-Apr-30 19:16:16 LOG4 check_wapp_levels: WAPP-4 power levels: 0.927 0.105 1.016 0.130 2009-Apr-30 19:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:16:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-30 19:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:17:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:17:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:17:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:17:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:17:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:17:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:17:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:17:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:17:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:17:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:17:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.019 0.915 1.055 1.058 2009-Apr-30 19:17:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.968 1.093 1.109 2009-Apr-30 19:17:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.106 0.946 1.055 0.916 2009-Apr-30 19:17:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.925 0.105 1.014 0.130 2009-Apr-30 19:17:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.125 (still bad) 2009-Apr-30 19:17:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.138 (still bad) 2009-Apr-30 19:17:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.153 (still bad) 2009-Apr-30 19:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.167 (still bad) 2009-Apr-30 19:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.164 (still bad) 2009-Apr-30 19:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.158 (still bad) 2009-Apr-30 19:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.150 (still bad) 2009-Apr-30 19:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.133 (still bad) 2009-Apr-30 19:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.121 (still bad) 2009-Apr-30 19:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-30 19:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.129 (still bad) 2009-Apr-30 19:17:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.139 (still bad) 2009-Apr-30 19:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.143 (still bad) 2009-Apr-30 19:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.148 (still bad) 2009-Apr-30 19:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.154 (still bad) 2009-Apr-30 19:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.142 (still bad) 2009-Apr-30 19:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.133 (still bad) 2009-Apr-30 19:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.127 (still bad) 2009-Apr-30 19:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:18:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:18:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 0.919 1.056 1.058 2009-Apr-30 19:18:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.966 1.077 1.091 2009-Apr-30 19:18:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.107 0.946 1.062 0.922 2009-Apr-30 19:18:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.105 1.013 0.130 2009-Apr-30 19:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:18:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-30 19:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:18:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:18:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:18:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:19:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:19:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:19:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:19:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:19:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:19:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:19:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.026 0.923 1.058 1.062 2009-Apr-30 19:19:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.007 0.971 1.081 1.093 2009-Apr-30 19:19:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.949 1.059 0.921 2009-Apr-30 19:19:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.105 1.017 0.130 2009-Apr-30 19:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:19:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:19:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:20:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:20:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 0.917 1.055 1.057 2009-Apr-30 19:20:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 0.975 1.077 1.093 2009-Apr-30 19:20:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.950 1.055 0.919 2009-Apr-30 19:20:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.924 0.105 1.015 0.130 2009-Apr-30 19:20:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.106 (still bad) 2009-Apr-30 19:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:21:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:21:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 0.922 1.058 1.060 2009-Apr-30 19:21:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.967 1.080 1.093 2009-Apr-30 19:21:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.948 1.058 0.923 2009-Apr-30 19:21:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.105 1.018 0.130 2009-Apr-30 19:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:21:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:22:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:22:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:22:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:22:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-30 19:22:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:22:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:22:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 0.921 1.059 1.061 2009-Apr-30 19:22:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.969 1.078 1.096 2009-Apr-30 19:22:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.111 0.952 1.063 0.925 2009-Apr-30 19:22:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.105 1.018 0.130 2009-Apr-30 19:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:22:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:23:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:23:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:23:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:23:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.020 0.923 1.060 1.061 2009-Apr-30 19:23:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.010 0.970 1.080 1.095 2009-Apr-30 19:23:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.952 1.059 0.920 2009-Apr-30 19:23:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.105 1.018 0.130 2009-Apr-30 19:23:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:23:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:23:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:23:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:23:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:23:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:23:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:23:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:23:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:24:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:24:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.018 0.924 1.058 1.062 2009-Apr-30 19:24:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.968 1.079 1.094 2009-Apr-30 19:24:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.950 1.059 0.921 2009-Apr-30 19:24:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.105 1.023 0.130 2009-Apr-30 19:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:24:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:24:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:24:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:24:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:24:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:24:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:25:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:25:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:25:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-30 19:25:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:25:18 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 19:25:18 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-30 19:25:18 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-30 19:25:18 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-30 19:25:18 LOG5 end_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-30 19:25:18 LOG1 fixed_driftmap: New position: year = 2009.3307576621796 RA = 09:33:52.9 RA/Dec = 09:34:25.6 +20:31:11.5 2009-Apr-30 19:25:18 NOTE fixed_driftmap: Correcting ZA to 2:09:57.8 ... 2009-Apr-30 19:25:18 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.1660461473 -CF 2009-Apr-30 19:25:18 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-30 19:25:18 START begin_task: Starting task 'WAPP calibration' 2009-Apr-30 19:25:18 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-30 19:25:18 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-30 19:25:18 START begin_task: Starting task 'selecting calibration type' 2009-Apr-30 19:25:18 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-30 19:25:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-30 19:25:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-30 19:25:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 19:25:18 START begin_task: Starting task 'waiting on setcal' 2009-Apr-30 19:25:18 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-30 19:25:18 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.1660461473 -CF 2009-Apr-30 19:25:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 19:25:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-30 19:25:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 19:25:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 19:25:19 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-30 19:25:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-30 19:25:19 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-30 19:25:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-30 19:25:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-30 19:25:19 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-30 19:25:19 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-30 19:25:19 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-30 19:25:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 19:25:19 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-30 19:25:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-30 19:25:19 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-30 19:25:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-30 19:25:19 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-30 19:25:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-30 19:25:19 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-30 19:25:19 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-30 19:25:19 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-30 19:25:19 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-30 19:25:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-30 19:25:19 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-30 19:25:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-30 19:25:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-30 19:25:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-30 19:25:19 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-30 19:25:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-30 19:25:19 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-30 19:25:19 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-30 19:25:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-30 19:25:19 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-30 19:25:19 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-30 19:25:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-30 19:25:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-30 19:25:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-30 19:25:19 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-30 19:25:19 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-30 19:25:19 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-30 19:25:19 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-30 19:25:19 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-30 19:25:19 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-30 19:25:19 INFO2 take_data: Starting WAPP 1-second scan: 912000161 2009-Apr-30 19:25:19 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-30 19:25:19 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-30 19:25:19 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 19:25:19 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-30 19:25:19 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84320.00 2009-Apr-30 19:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 19:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 19:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 19:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 19:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 19:25:21 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:25:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 19:25:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-30 19:25:21 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-30 19:25:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-30 19:25:21 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-30 19:25:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-30 19:25:21 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-30 19:25:21 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-30 19:25:21 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-30 19:25:21 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-30 19:25:21 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-30 19:25:21 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-30 19:25:21 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-30 19:25:21 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-30 19:25:21 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-30 19:25:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-30 19:25:21 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-30 19:25:21 LOG5 finish_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-30 19:25:21 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-30 19:25:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-30 19:25:21 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-30 19:25:21 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-30 19:25:22 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2009-Apr-30 19:25:22 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2009-Apr-30 19:25:22 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-30 19:25:22 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-30 19:25:22 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-30 19:25:22 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-30 19:25:22 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-30 19:25:22 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-30 19:25:22 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-30 19:25:22 LOG5 begin_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-30 19:25:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-30 19:25:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-30 19:25:22 INFO2 take_data: Starting WAPP 600-second scan: 912000162 2009-Apr-30 19:25:22 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-30 19:25:22 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-30 19:25:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-30 19:25:22 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-30 19:25:22 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-30 19:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.569 (still bad) 2009-Apr-30 19:25:22 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84323.00 2009-Apr-30 19:25:22 NOTE WAPPDATA-new_file: New FITS file: wapp.20090430.a2010.0016.fits 2009-Apr-30 19:25:22 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090430.a2010.0016.fits} 2009-Apr-30 19:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-30 19:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 19:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 19:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1029.000000 MHz 2009-Apr-30 19:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1019.000000 MHz 2009-Apr-30 19:25:24 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1025.000000 MHz 2009-Apr-30 19:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.569 (still bad) 2009-Apr-30 19:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:25:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:25:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.025 0.923 1.060 1.061 2009-Apr-30 19:25:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.009 0.971 1.083 1.094 2009-Apr-30 19:25:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.109 0.950 1.058 0.920 2009-Apr-30 19:25:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.928 0.105 1.017 0.130 2009-Apr-30 19:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:25:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:25:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:25:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:25:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:26:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:26:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:26:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:26:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:26:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:26:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:26:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:26:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:26:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:26:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:26:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:26:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.017 0.923 1.065 1.068 2009-Apr-30 19:26:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.008 0.968 1.081 1.093 2009-Apr-30 19:26:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.110 0.950 1.061 0.920 2009-Apr-30 19:26:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.105 1.018 0.130 2009-Apr-30 19:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-30 19:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:27:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:27:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:27:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:27:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:27:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:27:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.020 0.920 1.062 1.063 2009-Apr-30 19:27:32 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.968 1.079 1.095 2009-Apr-30 19:27:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.112 0.952 1.067 0.924 2009-Apr-30 19:27:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.931 0.105 1.022 0.130 2009-Apr-30 19:27:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:27:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:27:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:27:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:27:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:27:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:27:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:27:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-30 19:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-30 19:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-30 19:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-30 19:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:28:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:28:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.020 0.924 1.061 1.063 2009-Apr-30 19:28:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 0.972 1.084 1.098 2009-Apr-30 19:28:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.956 1.062 0.922 2009-Apr-30 19:28:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.105 1.023 0.130 2009-Apr-30 19:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:29:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:29:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:29:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.017 0.921 1.060 1.061 2009-Apr-30 19:29:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.010 0.969 1.085 1.098 2009-Apr-30 19:29:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.953 1.063 0.919 2009-Apr-30 19:29:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.105 1.022 0.130 2009-Apr-30 19:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-30 19:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.123 (still bad) 2009-Apr-30 19:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.127 (still bad) 2009-Apr-30 19:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-30 19:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-30 19:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.134 (still bad) 2009-Apr-30 19:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.133 (still bad) 2009-Apr-30 19:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.134 (still bad) 2009-Apr-30 19:30:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:30:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.017 0.923 1.063 1.063 2009-Apr-30 19:30:36 LOG4 check_wapp_levels: WAPP-2 power levels: 1.010 0.973 1.084 1.097 2009-Apr-30 19:30:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.965 1.061 0.919 2009-Apr-30 19:30:36 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.105 1.022 0.130 2009-Apr-30 19:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-30 19:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-30 19:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-30 19:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-30 19:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-30 19:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.114 (still bad) 2009-Apr-30 19:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-30 19:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-30 19:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-30 19:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-30 19:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-30 19:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-30 19:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:31:37 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:31:37 LOG4 check_wapp_levels: WAPP-1 power levels: 1.015 0.921 1.061 1.059 2009-Apr-30 19:31:37 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 0.969 1.085 1.096 2009-Apr-30 19:31:37 LOG4 check_wapp_levels: WAPP-3 power levels: 1.118 0.955 1.062 0.917 2009-Apr-30 19:31:37 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.105 1.020 0.131 2009-Apr-30 19:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-30 19:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-30 19:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-30 19:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-30 19:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-30 19:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-30 19:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-30 19:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-30 19:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-30 19:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.121 (still bad) 2009-Apr-30 19:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.121 (still bad) 2009-Apr-30 19:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-30 19:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-30 19:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-30 19:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.121 (still bad) 2009-Apr-30 19:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-30 19:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-30 19:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-30 19:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-30 19:32:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-30 19:32:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.020 0.921 1.062 1.061 2009-Apr-30 19:32:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.010 0.971 1.086 1.095 2009-Apr-30 19:32:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.954 1.074 0.927 2009-Apr-30 19:32:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.106 1.021 0.131 2009-Apr-30 19:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-30 19:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-30 19:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-30 19:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-30 19:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-30 19:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-30 19:32:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.121 (still bad) 2009-Apr-30 19:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:33:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:33:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.017 0.922 1.061 1.062 2009-Apr-30 19:33:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.012 0.970 1.085 1.094 2009-Apr-30 19:33:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.955 1.062 0.917 2009-Apr-30 19:33:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.105 1.021 0.130 2009-Apr-30 19:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.122 (still bad) 2009-Apr-30 19:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.122 (still bad) 2009-Apr-30 19:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.122 (still bad) 2009-Apr-30 19:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.121 (still bad) 2009-Apr-30 19:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-30 19:34:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-30 19:34:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.040 0.944 1.069 1.068 2009-Apr-30 19:34:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.017 0.974 1.090 1.098 2009-Apr-30 19:34:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.957 1.067 0.920 2009-Apr-30 19:34:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.105 1.027 0.131 2009-Apr-30 19:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-30 19:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-30 19:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.122 (still bad) 2009-Apr-30 19:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-30 19:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.122 (still bad) 2009-Apr-30 19:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-30 19:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-30 19:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.120 (still bad) 2009-Apr-30 19:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-30 19:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:35:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-30 19:35:23 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-30 19:35:23 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-30 19:35:23 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-30 19:35:23 LOG5 end_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-30 19:35:23 LOG1 fixed_driftmap: New position: year = 2009.3307768334728 RA = 09:43:59.7 RA/Dec = 09:44:32.3 +20:31:06.3 2009-Apr-30 19:35:23 NOTE fixed_driftmap: Correcting ZA to 2:09:52.6 ... 2009-Apr-30 19:35:23 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.1646178568 -CF 2009-Apr-30 19:35:23 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-30 19:35:23 START begin_task: Starting task 'WAPP calibration' 2009-Apr-30 19:35:23 LOG5 begin_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-30 19:35:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-30 19:35:23 START begin_task: Starting task 'selecting calibration type' 2009-Apr-30 19:35:23 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-30 19:35:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-30 19:35:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-30 19:35:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 19:35:23 START begin_task: Starting task 'waiting on setcal' 2009-Apr-30 19:35:23 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-30 19:35:23 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.1646178568 -CF 2009-Apr-30 19:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.118 (still bad) 2009-Apr-30 19:35:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 19:35:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-30 19:35:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-30 19:35:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 19:35:23 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-30 19:35:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-30 19:35:23 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-30 19:35:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-30 19:35:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-30 19:35:24 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-30 19:35:24 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-30 19:35:24 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-30 19:35:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-30 19:35:24 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-30 19:35:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-30 19:35:24 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-30 19:35:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-30 19:35:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-30 19:35:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-30 19:35:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-30 19:35:24 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-30 19:35:24 LOG5 begin_task: Level: (4) ID = <1017