2009-Apr-29 18:48:28 BEGIN executive: CIMA executive starting ... 2009-Apr-29 18:48:28 NOTE executive: STARTING NEW CIMA SESSION 2009-Apr-29 18:48:28 INFO1 executive: Using CIMA version 3.1.04 'smart' from 2009-04-21 11:22 2009-Apr-29 18:48:28 INFO4 executive: This is an ON-LINE session 2009-Apr-29 18:48:28 INFO4 executive: This is a REMOTE session 2009-Apr-29 18:48:28 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Apr-29 18:48:28 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Becky Koopmann' 2009-Apr-29 18:48:28 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090429' 2009-Apr-29 18:48:29 LOG2 log_preferences: Currently applied preferences: 2009-Apr-29 18:48:29 LOG2 log_preferences: prefs(dailylog) = daily 2009-Apr-29 18:48:29 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Apr-29 18:48:29 LOG2 log_preferences: prefs(datawindow) = open 2009-Apr-29 18:48:29 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Apr-29 18:48:29 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Apr-29 18:48:29 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Apr-29 18:48:29 LOG2 log_preferences: prefs(logcolours) = full 2009-Apr-29 18:48:29 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Apr-29 18:48:29 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Apr-29 18:48:29 LOG2 log_preferences: prefs(displayformat) = long 2009-Apr-29 18:48:29 LOG2 log_preferences: prefs(logformat) = new 2009-Apr-29 18:48:29 LOG2 log_preferences: prefs(fontsize) = 3 2009-Apr-29 18:48:29 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-29 18:48:29 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-29 18:48:29 ALERT executive: CIMA executive ready 2009-Apr-29 18:48:32 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2009-Apr-29 18:48:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:48:32 LOG4 got_cormsg: From DATATAKING: setup 2009-Apr-29 18:48:33 NOTE frontend: CIMA frontend ready 2009-Apr-29 18:48:39 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Apr-29 18:48:39 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Apr-29 18:48:39 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Apr-29 18:48:39 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Apr-29 18:48:39 LOG4 got_cormsg: From DATATAKING: 2009-Apr-29 18:48:39 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Apr-29 18:48:39 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Apr-29 18:48:39 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Apr-29 18:48:39 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Apr-29 18:48:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Apr-29 18:48:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Apr-29 18:48:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Apr-29 18:48:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Apr-29 18:48:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Apr-29 18:48:39 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Apr-29 18:48:39 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Apr-29 18:48:39 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Apr-29 18:48:39 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Apr-29 18:48:39 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-29 18:48:39 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-29 18:48:40 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-29 18:48:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-29 18:48:40 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-29 18:48:40 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-29 18:48:40 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-29 18:48:40 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-29 18:48:40 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-29 18:48:40 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Apr-29 18:48:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-29 18:48:40 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-29 18:48:40 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-29 18:48:40 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Apr-29 18:48:40 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-29 18:48:40 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-29 18:48:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:48:40 LOG4 got_cormsg: From DATATAKING: 2009-Apr-29 18:48:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:48:40 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-29 18:48:40 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-29 18:48:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:48:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:48:54 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-29 18:48:54 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-29 18:48:54 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-29 18:48:54 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-29 18:48:54 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-29 18:48:54 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-29 18:48:54 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-29 18:48:54 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-29 18:48:54 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-29 18:48:54 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-29 18:48:57 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-29 18:48:57 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-29 18:48:57 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-29 18:48:57 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-29 18:49:24 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Apr-29 18:49:36 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Apr-29 18:49:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Apr-29 18:49:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Apr-29 18:49:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Apr-29 18:49:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Apr-29 18:49:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Apr-29 18:49:36 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Apr-29 18:49:36 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-29 18:49:36 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Apr-29 18:49:36 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Apr-29 18:49:36 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-29 18:49:36 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-29 18:49:36 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Apr-29 18:49:36 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Apr-29 18:49:36 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Apr-29 18:49:36 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-29 18:49:37 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Apr-29 18:49:37 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-29 18:49:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-29 18:49:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-29 18:49:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-29 18:49:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-29 18:49:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-29 18:49:39 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-29 18:49:39 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-29 18:49:39 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-29 18:49:39 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-29 18:49:39 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-29 18:49:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-29 18:49:39 INFO1 config_iflo: Selecting receiver ALFA 2009-Apr-29 18:49:39 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Apr-29 18:49:39 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Apr-29 18:49:39 START begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-29 18:49:39 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-29 18:49:39 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-29 18:49:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-29 18:49:39 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-29 18:49:39 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-29 18:49:39 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-29 18:49:39 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Apr-29 18:49:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-29 18:49:39 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-29 18:49:39 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-29 18:49:39 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Apr-29 18:49:39 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-29 18:49:39 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Apr-29 18:49:39 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-29 18:49:39 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Apr-29 18:49:39 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Apr-29 18:49:39 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-29 18:49:39 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-29 18:49:39 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-29 18:49:39 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-29 18:49:39 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-29 18:49:39 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-29 18:49:39 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-29 18:49:39 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-29 18:49:39 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Apr-29 18:49:39 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-29 18:49:39 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Apr-29 18:49:39 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-29 18:49:39 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-29 18:49:39 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-29 18:49:39 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-29 18:49:39 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-29 18:49:39 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Apr-29 18:49:39 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-29 18:49:39 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Apr-29 18:49:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-29 18:49:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:49:39 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-29 18:49:39 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-29 18:49:39 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-29 18:49:39 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-29 18:49:39 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Apr-29 18:49:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Apr-29 18:49:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Apr-29 18:49:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-29 18:49:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Apr-29 18:49:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-29 18:49:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-29 18:49:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Apr-29 18:49:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Apr-29 18:49:40 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-29 18:49:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Apr-29 18:49:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-29 18:49:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-29 18:49:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-29 18:49:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-29 18:49:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:49:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-29 18:49:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Apr-29 18:49:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-29 18:49:40 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Apr-29 18:49:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:49:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:56 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-29 18:49:56 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-29 18:49:56 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-29 18:49:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-29 18:49:56 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-29 18:49:56 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-29 18:49:56 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-29 18:49:56 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-29 18:49:56 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-29 18:49:56 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-29 18:49:56 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-29 18:49:56 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-29 18:49:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-29 18:49:56 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-29 18:49:56 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-29 18:49:56 START begin_task: Starting task 'selecting calibration port' 2009-Apr-29 18:49:56 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-29 18:49:56 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-29 18:49:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-29 18:49:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:49:56 START begin_task: Starting task 'waiting on calport' 2009-Apr-29 18:49:56 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-29 18:49:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:56 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-29 18:49:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:49:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:56 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-29 18:49:56 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-29 18:49:56 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-29 18:49:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-29 18:49:56 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-29 18:49:56 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-29 18:49:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-29 18:49:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-29 18:49:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 18:49:56 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-29 18:49:56 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 18:49:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-29 18:49:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 18:49:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 18:49:56 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-29 18:49:56 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-29 18:49:56 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-29 18:49:56 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-29 18:49:56 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-29 18:49:56 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-29 18:49:56 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-29 18:49:56 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-29 18:49:56 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-29 18:49:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:49:56 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:49:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:49:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:49:56 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-29 18:49:56 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-29 18:49:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 18:49:57 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-29 18:49:57 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 18:49:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-29 18:49:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 18:49:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 18:49:57 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-29 18:49:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:49:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:49:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:49:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:49:57 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-29 18:49:57 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-29 18:49:57 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-29 18:49:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-29 18:49:57 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-29 18:49:57 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-29 18:49:57 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Apr-29 18:49:57 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Apr-29 18:49:57 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Apr-29 18:49:57 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Apr-29 18:49:57 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Apr-29 18:49:57 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-29 18:49:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Apr-29 18:49:57 LOG3 track_source: Calling 'track_source galfasrc 085500.0 +204818 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-29 18:49:57 START begin_task: Starting task 'sending tracking commands' 2009-Apr-29 18:49:57 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-29 18:49:57 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Apr-29 18:49:57 INFO1 track_source: Starting to track galfasrc 2009-Apr-29 18:49:57 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-29 18:49:57 LOG3 vw_send: To DATATAKING: set ra 085500.0 2009-Apr-29 18:49:57 LOG3 vw_send: To DATATAKING: set dec +204818 2009-Apr-29 18:49:57 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-29 18:49:57 LOG3 vw_send: To DATATAKING: pnt tr 085500.0 +204818 -CJ 2009-Apr-29 18:49:57 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-29 18:49:57 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-29 18:49:57 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-29 18:49:57 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-29 18:49:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-29 18:49:57 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-29 18:49:57 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-29 18:49:58 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Apr-29 18:49:58 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-29 18:49:58 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Apr-29 18:49:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-29 18:49:58 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Apr-29 18:49:58 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-29 18:49:58 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Apr-29 18:49:58 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Apr-29 18:49:58 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-29 18:49:58 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-29 18:49:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-29 18:49:58 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-29 18:49:58 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-29 18:49:58 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-29 18:49:58 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-29 18:49:58 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-29 18:49:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-29 18:49:58 NOTE WAPPDATA-new_file: New FITS file: wapp.20090429.a2010.0000.fits 2009-Apr-29 18:49:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-29 18:49:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-29 18:49:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-29 18:49:58 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090429.a2010.0000.fits} 2009-Apr-29 18:49:58 LOG4 got_cormsg: From DATATAKING: set ra 085500.0 2009-Apr-29 18:49:58 LOG4 got_cormsg: From DATATAKING: set dec +204818 2009-Apr-29 18:49:58 LOG4 got_cormsg: From DATATAKING: vw% 085500.0 2009-Apr-29 18:49:58 LOG4 got_cormsg: From DATATAKING: vw% +204818 2009-Apr-29 18:49:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:58 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-29 18:49:58 LOG4 got_cormsg: From DATATAKING: pnt tr 085500.0 +204818 -CJ 2009-Apr-29 18:49:58 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-29 18:49:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-29 18:49:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:49:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-29 18:50:04 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-29 18:50:04 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-29 18:50:04 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-29 18:50:04 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-29 18:50:04 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-29 18:50:04 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-29 18:50:04 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-29 18:50:04 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-29 18:50:04 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-29 18:50:04 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-29 18:50:04 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-29 18:50:04 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Apr-29 18:50:04 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Apr-29 18:50:04 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-29 18:50:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-29 18:50:04 LOG3 waittrk: Start waittrk 5 2009-Apr-29 18:50:04 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-29 18:50:04 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-29 18:50:09 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-29 18:50:09 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-29 18:50:09 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-29 18:50:09 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-29 18:50:17 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-29 18:50:17 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-29 18:50:17 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-29 18:50:17 INFO2 waittrk: Now tracking galfasrc 2009-Apr-29 18:50:17 LOG4 waittrk: Current telescope position: Az = 180.80 ZA = 2.43 2009-Apr-29 18:50:17 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-29 18:50:17 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-29 18:50:17 DONE finish_task: DONE finished waiting: telescope on source 2009-Apr-29 18:50:17 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-29 18:50:17 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-29 18:50:17 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-29 18:50:17 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-29 18:50:17 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Apr-29 18:50:18 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-29 18:50:18 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-29 18:50:18 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Apr-29 18:50:18 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-29 18:50:18 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Apr-29 18:50:18 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Apr-29 18:50:18 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Apr-29 18:50:18 START begin_task: Starting task 'selecting calibration type' 2009-Apr-29 18:50:18 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-29 18:50:18 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-29 18:50:18 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-29 18:50:18 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:50:18 START begin_task: Starting task 'waiting on setcal' 2009-Apr-29 18:50:18 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-29 18:50:18 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-29 18:50:18 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:50:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:50:18 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-29 18:50:18 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-29 18:50:18 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-29 18:50:18 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-29 18:50:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-29 18:50:18 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-29 18:50:18 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-29 18:50:18 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-29 18:50:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:50:18 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-29 18:50:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-29 18:50:18 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-29 18:50:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-29 18:50:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-29 18:50:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-29 18:50:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-29 18:50:18 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-29 18:50:18 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-29 18:50:19 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-29 18:50:19 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-29 18:50:19 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-29 18:50:19 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-29 18:50:19 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-29 18:50:19 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-29 18:50:19 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-29 18:50:19 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:50:19 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:50:19 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:50:19 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:50:19 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090429.a2010.0000.fits' is empty! 2009-Apr-29 18:50:19 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Apr-29 18:50:19 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-29 18:50:19 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-29 18:50:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-29 18:50:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-29 18:50:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 18:50:19 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-29 18:50:19 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 18:50:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-29 18:50:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 18:50:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 18:50:19 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-29 18:50:19 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-29 18:50:19 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-29 18:50:19 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-29 18:50:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-29 18:50:19 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-29 18:50:19 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-29 18:50:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-29 18:50:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:50:19 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-29 18:50:19 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-29 18:50:19 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-29 18:50:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:50:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-29 18:50:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:50:22 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-29 18:50:22 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-29 18:50:22 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-29 18:50:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-29 18:50:22 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-29 18:50:22 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-29 18:50:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-29 18:50:22 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-29 18:50:22 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-29 18:50:22 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-29 18:50:22 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-29 18:50:22 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-29 18:50:22 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-29 18:50:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-29 18:50:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:50:23 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-29 18:50:23 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-29 18:50:23 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 2 dB 2009-Apr-29 18:50:23 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-29 18:50:23 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-29 18:50:23 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-29 18:50:23 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-29 18:50:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.050 0.915 ALFA beam 1: 1.075 1.070 2009-Apr-29 18:50:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.999 0.967 ALFA beam 3: 1.076 1.086 2009-Apr-29 18:50:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.101 0.937 ALFA beam 5: 1.071 1.036 2009-Apr-29 18:50:23 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.931 0.105 ALFA beam 7: 1.028 0.130 2009-Apr-29 18:50:23 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-29 18:50:23 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-29 18:50:23 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-29 18:50:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-29 18:50:23 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-29 18:50:23 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-29 18:50:23 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-29 18:50:23 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-29 18:50:23 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-29 18:50:23 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-29 18:50:23 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-29 18:50:23 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-29 18:50:23 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-29 18:50:23 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-29 18:50:23 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-29 18:50:23 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-29 18:50:23 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:50:23 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32795 J 2009-Apr-29 18:50:23 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:50:23 LOG2 antvel: Parameters to Doppler: Topocentric 82222 2009 119 0.0 2009-Apr-29 18:50:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:50:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-29 18:50:23 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-29 18:50:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:50:23 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:50:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-29 18:50:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:50:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-29 18:50:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:50:23 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-29 18:50:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-29 18:50:23 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.924038 2009.3279533931604 18.999933 2009-Apr-29 18:50:23 LOG4 log_alfabeam: ALFABEAM 0 8.916666666667100 20.805000000000010 2009-Apr-29 18:50:23 LOG4 log_alfabeam: ALFABEAM 1 8.917792960554912 20.700094133875950 2009-Apr-29 18:50:23 LOG4 log_alfabeam: ALFABEAM 2 8.922716980484966 20.768010742800733 2009-Apr-29 18:50:23 LOG4 log_alfabeam: ALFABEAM 3 8.921771696647003 20.873351458766692 2009-Apr-29 18:50:23 LOG4 log_alfabeam: ALFABEAM 4 8.915430878541006 20.909790888730612 2009-Apr-29 18:50:23 LOG4 log_alfabeam: ALFABEAM 5 8.910434524460502 20.838870734882271 2009-Apr-29 18:50:23 LOG4 log_alfabeam: ALFABEAM 6 8.911849886001253 20.734613936402535 2009-Apr-29 18:50:23 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900022 2009-Apr-29 18:50:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:50:24 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-29 18:50:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:50:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-29 18:50:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:50:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:50:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:50:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-29 18:50:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82225.00 2009-Apr-29 18:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:50:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:50:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-29 18:50:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.093 0.941 1.117 1.097 2009-Apr-29 18:50:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.019 1.001 1.150 1.132 2009-Apr-29 18:50:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.165 0.972 1.148 1.093 2009-Apr-29 18:50:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.962 0.107 1.053 0.133 2009-Apr-29 18:50:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.158 (still bad) 2009-Apr-29 18:50:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.157 (still bad) 2009-Apr-29 18:50:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.158 (still bad) 2009-Apr-29 18:50:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.157 (still bad) 2009-Apr-29 18:50:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:50:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:50:35 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-29 18:50:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:50:35 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-29 18:50:35 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-29 18:50:35 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-29 18:50:35 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-29 18:50:35 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:50:35 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32795 J 2009-Apr-29 18:50:35 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:50:35 LOG2 antvel: Parameters to Doppler: Topocentric 82235 2009 119 0.0 2009-Apr-29 18:50:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:50:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-29 18:50:35 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-29 18:50:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:50:35 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:50:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-29 18:50:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:50:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-29 18:50:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:50:35 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-29 18:50:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-29 18:50:35 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.927659 2009.3279538051056 18.999933 2009-Apr-29 18:50:35 LOG4 log_alfabeam: ALFABEAM 0 8.916666666667767 20.805000000000010 2009-Apr-29 18:50:35 LOG4 log_alfabeam: ALFABEAM 1 8.917952315499692 20.700455178027564 2009-Apr-29 18:50:35 LOG4 log_alfabeam: ALFABEAM 2 8.922771944078287 20.769830354596770 2009-Apr-29 18:50:35 LOG4 log_alfabeam: ALFABEAM 3 8.921666440736470 20.874864074601902 2009-Apr-29 18:50:35 LOG4 log_alfabeam: ALFABEAM 4 8.915271509119355 20.909397066367841 2009-Apr-29 18:50:35 LOG4 log_alfabeam: ALFABEAM 5 8.910384407424514 20.836997515084146 2009-Apr-29 18:50:35 LOG4 log_alfabeam: ALFABEAM 6 8.911958113046323 20.733188125773452 2009-Apr-29 18:50:35 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900023 2009-Apr-29 18:50:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:50:36 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-29 18:50:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:50:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-29 18:50:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:50:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:50:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:50:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.158 (still bad) 2009-Apr-29 18:50:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-29 18:50:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82237.00 2009-Apr-29 18:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:50:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:50:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.158 (still bad) 2009-Apr-29 18:50:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.154 (still bad) 2009-Apr-29 18:50:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.153 (still bad) 2009-Apr-29 18:50:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.154 (still bad) 2009-Apr-29 18:50:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.153 (still bad) 2009-Apr-29 18:50:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:50:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:50:47 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-29 18:50:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:50:47 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-29 18:50:47 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-29 18:50:47 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-29 18:50:47 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-29 18:50:47 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:50:47 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32795 J 2009-Apr-29 18:50:47 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:50:47 LOG2 antvel: Parameters to Doppler: Topocentric 82247 2009 119 0.0 2009-Apr-29 18:50:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:50:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-29 18:50:47 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-29 18:50:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:50:47 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:50:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-29 18:50:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:50:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-29 18:50:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:50:47 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-29 18:50:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-29 18:50:47 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.931001 2009.3279541853626 18.999933 2009-Apr-29 18:50:47 LOG4 log_alfabeam: ALFABEAM 0 8.916666666667044 20.805000000000003 2009-Apr-29 18:50:47 LOG4 log_alfabeam: ALFABEAM 1 8.918098827561172 20.700830512808299 2009-Apr-29 18:50:47 LOG4 log_alfabeam: ALFABEAM 2 8.922820218253319 20.771523833323407 2009-Apr-29 18:50:47 LOG4 log_alfabeam: ALFABEAM 3 8.921567258331759 20.876231645153293 2009-Apr-29 18:50:47 LOG4 log_alfabeam: ALFABEAM 4 8.915125073005111 20.908991566625353 2009-Apr-29 18:50:47 LOG4 log_alfabeam: ALFABEAM 5 8.910340746573517 20.835257143814502 2009-Apr-29 18:50:47 LOG4 log_alfabeam: ALFABEAM 6 8.912059797733477 20.731902135478656 2009-Apr-29 18:50:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900024 2009-Apr-29 18:50:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:50:48 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-29 18:50:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:50:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-29 18:50:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:50:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:50:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:50:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-29 18:50:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.151 (still bad) 2009-Apr-29 18:50:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82249.00 2009-Apr-29 18:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:50:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:50:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.153 (still bad) 2009-Apr-29 18:50:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.149 (still bad) 2009-Apr-29 18:50:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.149 (still bad) 2009-Apr-29 18:50:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.150 (still bad) 2009-Apr-29 18:50:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.149 (still bad) 2009-Apr-29 18:50:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:50:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:50:59 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-29 18:50:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:50:59 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-29 18:50:59 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-29 18:50:59 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-29 18:50:59 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-29 18:50:59 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:50:59 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32795 J 2009-Apr-29 18:50:59 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:50:59 LOG2 antvel: Parameters to Doppler: Topocentric 82259 2009 119 0.0 2009-Apr-29 18:50:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:50:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-29 18:50:59 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-29 18:50:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:50:59 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:50:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-29 18:50:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:50:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-29 18:50:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:50:59 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-29 18:50:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-29 18:50:59 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.934344 2009.3279545656196 18.999933 2009-Apr-29 18:50:59 LOG4 log_alfabeam: ALFABEAM 0 8.916666666667011 20.805000000000010 2009-Apr-29 18:50:59 LOG4 log_alfabeam: ALFABEAM 1 8.918244670157785 20.701245872870679 2009-Apr-29 18:50:59 LOG4 log_alfabeam: ALFABEAM 2 8.922866096236236 20.773229330030990 2009-Apr-29 18:50:59 LOG4 log_alfabeam: ALFABEAM 3 8.921466210644104 20.877570668574560 2009-Apr-29 18:50:59 LOG4 log_alfabeam: ALFABEAM 4 8.914979391761467 20.908546187603154 2009-Apr-29 18:50:59 LOG4 log_alfabeam: ALFABEAM 5 8.910299606733211 20.833507327122451 2009-Apr-29 18:50:59 LOG4 log_alfabeam: ALFABEAM 6 8.912163112722805 20.730645926473141 2009-Apr-29 18:50:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900025 2009-Apr-29 18:51:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:51:00 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-29 18:51:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:51:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-29 18:51:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:51:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:51:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:51:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-29 18:51:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82261.00 2009-Apr-29 18:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.148 (still bad) 2009-Apr-29 18:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:51:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.141 (still bad) 2009-Apr-29 18:51:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.140 (still bad) 2009-Apr-29 18:51:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.137 (still bad) 2009-Apr-29 18:51:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.139 (still bad) 2009-Apr-29 18:51:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.138 (still bad) 2009-Apr-29 18:51:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:51:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:51:11 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-29 18:51:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:51:11 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-29 18:51:11 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-29 18:51:11 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-29 18:51:11 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-29 18:51:11 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:51:11 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32795 J 2009-Apr-29 18:51:11 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:51:11 LOG2 antvel: Parameters to Doppler: Topocentric 82271 2009 119 0.0 2009-Apr-29 18:51:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:51:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-29 18:51:11 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-29 18:51:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:51:11 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:51:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-29 18:51:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:51:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-29 18:51:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:51:11 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-29 18:51:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-29 18:51:11 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.937686 2009.3279549458766 18.999933 2009-Apr-29 18:51:11 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666812 20.805000000000003 2009-Apr-29 18:51:11 LOG4 log_alfabeam: ALFABEAM 1 8.918389592582557 20.701700359945768 2009-Apr-29 18:51:11 LOG4 log_alfabeam: ALFABEAM 2 8.922909507055273 20.774943844690146 2009-Apr-29 18:51:11 LOG4 log_alfabeam: ALFABEAM 3 8.921363481132870 20.878878904495920 2009-Apr-29 18:51:11 LOG4 log_alfabeam: ALFABEAM 4 8.914834715218680 20.908061913362879 2009-Apr-29 18:51:11 LOG4 log_alfabeam: ALFABEAM 5 8.910261044612859 20.831751180269215 2009-Apr-29 18:51:11 LOG4 log_alfabeam: ALFABEAM 6 8.912267869166733 20.729421494549729 2009-Apr-29 18:51:11 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900026 2009-Apr-29 18:51:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:51:12 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-29 18:51:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:51:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-29 18:51:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:51:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:51:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:51:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-29 18:51:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82273.00 2009-Apr-29 18:51:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.138 (still bad) 2009-Apr-29 18:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:51:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:51:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 18:51:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 18:51:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 18:51:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 18:51:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:51:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 18:51:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:51:23 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-29 18:51:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:51:23 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-29 18:51:23 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-29 18:51:23 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-29 18:51:23 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-29 18:51:23 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:51:23 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:51:23 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:51:23 LOG2 antvel: Parameters to Doppler: Topocentric 82283 2009 119 0.0 2009-Apr-29 18:51:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:51:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-29 18:51:23 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-29 18:51:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:51:23 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:51:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-29 18:51:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:51:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-29 18:51:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:51:23 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-29 18:51:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-29 18:51:23 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.941029 2009.3279553261339 18.999933 2009-Apr-29 18:51:23 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666762 20.805000000000003 2009-Apr-29 18:51:23 LOG4 log_alfabeam: ALFABEAM 1 8.918533521957924 20.702193466479130 2009-Apr-29 18:51:23 LOG4 log_alfabeam: ALFABEAM 2 8.922950441689789 20.776666400869463 2009-Apr-29 18:51:23 LOG4 log_alfabeam: ALFABEAM 3 8.921259136577342 20.880155807316367 2009-Apr-29 18:51:23 LOG4 log_alfabeam: ALFABEAM 4 8.914691115243867 20.907539299938662 2009-Apr-29 18:51:23 LOG4 log_alfabeam: ALFABEAM 5 8.910225060293721 20.829989730637191 2009-Apr-29 18:51:23 LOG4 log_alfabeam: ALFABEAM 6 8.912373998579591 20.728229237283582 2009-Apr-29 18:51:23 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900027 2009-Apr-29 18:51:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:51:24 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-29 18:51:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:51:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-29 18:51:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:51:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:51:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:51:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-29 18:51:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82285.00 2009-Apr-29 18:51:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 18:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:51:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:51:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 18:51:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.913 1.072 1.070 2009-Apr-29 18:51:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.969 1.082 1.105 2009-Apr-29 18:51:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.949 1.062 1.045 2009-Apr-29 18:51:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.106 1.036 0.132 2009-Apr-29 18:51:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-29 18:51:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-29 18:51:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 18:51:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:51:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:51:35 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-29 18:51:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:51:35 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-29 18:51:35 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-29 18:51:35 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-29 18:51:35 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-29 18:51:35 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:51:35 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:51:35 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:51:35 LOG2 antvel: Parameters to Doppler: Topocentric 82295 2009 119 0.0 2009-Apr-29 18:51:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:51:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-29 18:51:35 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-29 18:51:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:51:35 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:51:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-29 18:51:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:51:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-29 18:51:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:51:35 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-29 18:51:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-29 18:51:35 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.944371 2009.3279557063909 18.999933 2009-Apr-29 18:51:35 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666687 20.805000000000003 2009-Apr-29 18:51:35 LOG4 log_alfabeam: ALFABEAM 1 8.918676217408029 20.702723994671729 2009-Apr-29 18:51:35 LOG4 log_alfabeam: ALFABEAM 2 8.922988849297159 20.778393955939993 2009-Apr-29 18:51:35 LOG4 log_alfabeam: ALFABEAM 3 8.921153372035496 20.881399402870475 2009-Apr-29 18:51:35 LOG4 log_alfabeam: ALFABEAM 4 8.914548830992180 20.906979627024501 2009-Apr-29 18:51:35 LOG4 log_alfabeam: ALFABEAM 5 8.910191689489698 20.828226106655833 2009-Apr-29 18:51:35 LOG4 log_alfabeam: ALFABEAM 6 8.912481303052033 20.727070878567115 2009-Apr-29 18:51:35 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900028 2009-Apr-29 18:51:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:51:36 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-29 18:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 18:51:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:51:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-29 18:51:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:51:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:51:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:51:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-29 18:51:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82297.00 2009-Apr-29 18:51:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:51:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:51:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:51:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:51:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:51:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:51:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:51:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-29 18:51:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.110 (still bad) 2009-Apr-29 18:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.105 (still bad) 2009-Apr-29 18:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.111 (still bad) 2009-Apr-29 18:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Apr-29 18:51:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:51:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:51:47 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-29 18:51:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:51:47 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-29 18:51:47 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-29 18:51:47 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-29 18:51:47 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-29 18:51:47 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 18:51:47 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-29 18:51:47 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 18:51:47 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-29 18:51:47 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 18:51:47 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 18:51:47 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-29 18:51:47 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-29 18:51:47 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-29 18:51:47 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-29 18:51:47 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:51:47 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:51:47 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:51:47 LOG2 antvel: Parameters to Doppler: Topocentric 82307 2009 119 0.0 2009-Apr-29 18:51:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:51:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-29 18:51:47 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-29 18:51:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:51:47 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:51:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-29 18:51:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:51:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-29 18:51:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:51:47 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-29 18:51:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-29 18:51:47 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.947714 2009.3279560866479 18.999933 2009-Apr-29 18:51:47 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666638 20.804999999999993 2009-Apr-29 18:51:47 LOG4 log_alfabeam: ALFABEAM 1 8.918817615083119 20.703291242228371 2009-Apr-29 18:51:47 LOG4 log_alfabeam: ALFABEAM 2 8.923024735170031 20.780125531976761 2009-Apr-29 18:51:47 LOG4 log_alfabeam: ALFABEAM 3 8.921046260502985 20.882609347691208 2009-Apr-29 18:51:47 LOG4 log_alfabeam: ALFABEAM 4 8.914407924687108 20.906383641252230 2009-Apr-29 18:51:47 LOG4 log_alfabeam: ALFABEAM 5 8.910160917525323 20.826461313649421 2009-Apr-29 18:51:47 LOG4 log_alfabeam: ALFABEAM 6 8.912589709854618 20.725946613157245 2009-Apr-29 18:51:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900029 2009-Apr-29 18:51:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:51:48 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-29 18:51:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:51:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-29 18:51:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:51:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:51:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Apr-29 18:51:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-29 18:51:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82309.00 2009-Apr-29 18:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:51:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.638 (still bad) 2009-Apr-29 18:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.636 (still bad) 2009-Apr-29 18:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.635 (still bad) 2009-Apr-29 18:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.638 (still bad) 2009-Apr-29 18:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.634 (still bad) 2009-Apr-29 18:51:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:51:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:51:59 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-29 18:51:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:51:59 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-29 18:51:59 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-29 18:51:59 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-29 18:51:59 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-29 18:51:59 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:51:59 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:51:59 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:51:59 LOG2 antvel: Parameters to Doppler: Topocentric 82319 2009 119 0.0 2009-Apr-29 18:51:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:51:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-29 18:51:59 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-29 18:51:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:51:59 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:51:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-29 18:51:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:51:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-29 18:51:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:51:59 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-29 18:51:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-29 18:51:59 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.951056 2009.3279564669049 18.999933 2009-Apr-29 18:51:59 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666739 20.805000000000003 2009-Apr-29 18:51:59 LOG4 log_alfabeam: ALFABEAM 1 8.918957487526280 20.703893741751855 2009-Apr-29 18:51:59 LOG4 log_alfabeam: ALFABEAM 2 8.923058068766601 20.781858094512536 2009-Apr-29 18:51:59 LOG4 log_alfabeam: ALFABEAM 3 8.920938005060480 20.883783957646873 2009-Apr-29 18:51:59 LOG4 log_alfabeam: ALFABEAM 4 8.914268621292091 20.905752886062203 2009-Apr-29 18:51:59 LOG4 log_alfabeam: ALFABEAM 5 8.910132759359712 20.824698441249016 2009-Apr-29 18:51:59 LOG4 log_alfabeam: ALFABEAM 6 8.912699015587615 20.724857875773019 2009-Apr-29 18:51:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900030 2009-Apr-29 18:52:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:52:00 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-29 18:52:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:52:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-29 18:52:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:52:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:52:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:52:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-29 18:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.633 (still bad) 2009-Apr-29 18:52:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82321.00 2009-Apr-29 18:52:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:52:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:52:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:52:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:52:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:52:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:52:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:52:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:52:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.631 (still bad) 2009-Apr-29 18:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.626 (still bad) 2009-Apr-29 18:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.622 (still bad) 2009-Apr-29 18:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.626 (still bad) 2009-Apr-29 18:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.624 (still bad) 2009-Apr-29 18:52:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:52:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:52:11 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-29 18:52:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:52:11 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-29 18:52:11 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-29 18:52:11 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-29 18:52:11 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-29 18:52:11 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:52:11 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:52:11 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:52:11 LOG2 antvel: Parameters to Doppler: Topocentric 82331 2009 119 0.0 2009-Apr-29 18:52:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:52:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-29 18:52:11 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-29 18:52:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:52:11 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:52:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-29 18:52:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:52:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-29 18:52:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:52:11 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-29 18:52:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-29 18:52:11 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.954399 2009.3279568471619 18.999933 2009-Apr-29 18:52:11 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666739 20.805000000000000 2009-Apr-29 18:52:11 LOG4 log_alfabeam: ALFABEAM 1 8.919095782515893 20.704530625401549 2009-Apr-29 18:52:11 LOG4 log_alfabeam: ALFABEAM 2 8.923088869442726 20.783590704501734 2009-Apr-29 18:52:11 LOG4 log_alfabeam: ALFABEAM 3 8.920828681894776 20.884923104821979 2009-Apr-29 18:52:11 LOG4 log_alfabeam: ALFABEAM 4 8.914130970864072 20.905088267983068 2009-Apr-29 18:52:11 LOG4 log_alfabeam: ALFABEAM 5 8.910107186170295 20.822938432036914 2009-Apr-29 18:52:11 LOG4 log_alfabeam: ALFABEAM 6 8.912809146231993 20.723804650415328 2009-Apr-29 18:52:11 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900031 2009-Apr-29 18:52:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:52:12 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-29 18:52:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:52:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-29 18:52:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:52:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:52:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:52:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-29 18:52:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82333.00 2009-Apr-29 18:52:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.621 (still bad) 2009-Apr-29 18:52:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:52:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:52:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:52:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:52:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:52:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:52:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:52:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:52:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:52:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.619 (still bad) 2009-Apr-29 18:52:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.620 (still bad) 2009-Apr-29 18:52:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.617 (still bad) 2009-Apr-29 18:52:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.619 (still bad) 2009-Apr-29 18:52:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.619 (still bad) 2009-Apr-29 18:52:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:52:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:52:23 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-29 18:52:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:52:23 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-29 18:52:23 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-29 18:52:23 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-29 18:52:23 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-29 18:52:23 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:52:23 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:52:23 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:52:23 LOG2 antvel: Parameters to Doppler: Topocentric 82343 2009 119 0.0 2009-Apr-29 18:52:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:52:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-29 18:52:23 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-29 18:52:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:52:23 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:52:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-29 18:52:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:52:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-29 18:52:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:52:23 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-29 18:52:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-29 18:52:23 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.957741 2009.3279572274191 18.999933 2009-Apr-29 18:52:23 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666702 20.805000000000003 2009-Apr-29 18:52:23 LOG4 log_alfabeam: ALFABEAM 1 8.919232289018861 20.705200193825480 2009-Apr-29 18:52:23 LOG4 log_alfabeam: ALFABEAM 2 8.923117126454848 20.785320384218288 2009-Apr-29 18:52:23 LOG4 log_alfabeam: ALFABEAM 3 8.920718498395365 20.886025408414731 2009-Apr-29 18:52:23 LOG4 log_alfabeam: ALFABEAM 4 8.913995181269623 20.904391554934790 2009-Apr-29 18:52:23 LOG4 log_alfabeam: ALFABEAM 5 8.910084193074320 20.821184288371470 2009-Apr-29 18:52:23 LOG4 log_alfabeam: ALFABEAM 6 8.912919896496170 20.722788075547054 2009-Apr-29 18:52:23 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900032 2009-Apr-29 18:52:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:52:24 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-29 18:52:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:52:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-29 18:52:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:52:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:52:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:52:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-29 18:52:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82345.00 2009-Apr-29 18:52:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.618 (still bad) 2009-Apr-29 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:52:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.604 (still bad) 2009-Apr-29 18:52:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-29 18:52:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.495 1.265 1.501 1.486 2009-Apr-29 18:52:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.411 1.364 1.549 1.542 2009-Apr-29 18:52:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.604 1.353 1.540 1.423 2009-Apr-29 18:52:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.360 0.107 1.490 0.133 2009-Apr-29 18:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.600 (still bad) 2009-Apr-29 18:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.604 (still bad) 2009-Apr-29 18:52:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.600 (still bad) 2009-Apr-29 18:52:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:52:35 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-29 18:52:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:52:35 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-29 18:52:35 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-29 18:52:35 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-29 18:52:35 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-29 18:52:35 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:52:35 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:52:35 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:52:35 LOG2 antvel: Parameters to Doppler: Topocentric 82355 2009 119 0.0 2009-Apr-29 18:52:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:52:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-29 18:52:35 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-29 18:52:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:52:35 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:52:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-29 18:52:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:52:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-29 18:52:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:52:35 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-29 18:52:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-29 18:52:35 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.961084 2009.3279576076761 18.999933 2009-Apr-29 18:52:35 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666714 20.805000000000000 2009-Apr-29 18:52:35 LOG4 log_alfabeam: ALFABEAM 1 8.919366968462205 20.705901448439338 2009-Apr-29 18:52:35 LOG4 log_alfabeam: ALFABEAM 2 8.923142872403570 20.787046270701484 2009-Apr-29 18:52:35 LOG4 log_alfabeam: ALFABEAM 3 8.920607530904906 20.887090960066914 2009-Apr-29 18:52:35 LOG4 log_alfabeam: ALFABEAM 4 8.913861288479559 20.903663777378632 2009-Apr-29 18:52:35 LOG4 log_alfabeam: ALFABEAM 5 8.910063738266659 20.819436853724746 2009-Apr-29 18:52:35 LOG4 log_alfabeam: ALFABEAM 6 8.913031193952397 20.721807925386159 2009-Apr-29 18:52:35 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900033 2009-Apr-29 18:52:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:52:36 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-29 18:52:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:52:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-29 18:52:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:52:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:52:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:52:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-29 18:52:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82357.00 2009-Apr-29 18:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.600 (still bad) 2009-Apr-29 18:52:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:52:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:52:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:52:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:52:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:52:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:52:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:52:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:52:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.580 (still bad) 2009-Apr-29 18:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.573 (still bad) 2009-Apr-29 18:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.572 (still bad) 2009-Apr-29 18:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.577 (still bad) 2009-Apr-29 18:52:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:52:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:52:47 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-29 18:52:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:52:47 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-29 18:52:47 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-29 18:52:47 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-29 18:52:47 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-29 18:52:47 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:52:47 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:52:47 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:52:47 LOG2 antvel: Parameters to Doppler: Topocentric 82367 2009 119 0.0 2009-Apr-29 18:52:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:52:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-29 18:52:47 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-29 18:52:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:52:47 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:52:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-29 18:52:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:52:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-29 18:52:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:52:47 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-29 18:52:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-29 18:52:47 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.964426 2009.3279579879331 18.999933 2009-Apr-29 18:52:47 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666725 20.805000000000003 2009-Apr-29 18:52:47 LOG4 log_alfabeam: ALFABEAM 1 8.919499628548724 20.706632500991720 2009-Apr-29 18:52:47 LOG4 log_alfabeam: ALFABEAM 2 8.923166115232881 20.788765487149533 2009-Apr-29 18:52:47 LOG4 log_alfabeam: ALFABEAM 3 8.920495987466271 20.888118685057428 2009-Apr-29 18:52:47 LOG4 log_alfabeam: ALFABEAM 4 8.913729481072082 20.902906883440920 2009-Apr-29 18:52:47 LOG4 log_alfabeam: ALFABEAM 5 8.910045798521415 20.817699000326282 2009-Apr-29 18:52:47 LOG4 log_alfabeam: ALFABEAM 6 8.913142834868458 20.720865044919293 2009-Apr-29 18:52:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900034 2009-Apr-29 18:52:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:52:48 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-29 18:52:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.573 (still bad) 2009-Apr-29 18:52:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:52:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-29 18:52:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:52:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:52:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:52:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-29 18:52:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82369.00 2009-Apr-29 18:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:52:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.574 (still bad) 2009-Apr-29 18:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:52:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:52:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.573 (still bad) 2009-Apr-29 18:52:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.563 (still bad) 2009-Apr-29 18:52:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.563 (still bad) 2009-Apr-29 18:52:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.566 (still bad) 2009-Apr-29 18:52:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:52:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:52:59 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-29 18:52:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:52:59 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-29 18:52:59 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-29 18:52:59 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-29 18:52:59 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-29 18:52:59 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:52:59 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:52:59 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:52:59 LOG2 antvel: Parameters to Doppler: Topocentric 82379 2009 119 0.0 2009-Apr-29 18:52:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:52:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-29 18:52:59 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-29 18:52:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:52:59 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:52:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-29 18:52:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:52:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-29 18:52:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:52:59 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-29 18:52:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-29 18:52:59 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.967768 2009.3279583681901 18.999933 2009-Apr-29 18:52:59 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666728 20.805000000000000 2009-Apr-29 18:52:59 LOG4 log_alfabeam: ALFABEAM 1 8.919630206969870 20.707392028943246 2009-Apr-29 18:52:59 LOG4 log_alfabeam: ALFABEAM 2 8.923186893629330 20.790476768226799 2009-Apr-29 18:52:59 LOG4 log_alfabeam: ALFABEAM 3 8.920383975267509 20.889108599039698 2009-Apr-29 18:52:59 LOG4 log_alfabeam: ALFABEAM 4 8.913599818145254 20.902122227365258 2009-Apr-29 18:52:59 LOG4 log_alfabeam: ALFABEAM 5 8.910030324930700 20.815971957141961 2009-Apr-29 18:52:59 LOG4 log_alfabeam: ALFABEAM 6 8.913254717563731 20.719959273273197 2009-Apr-29 18:52:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900035 2009-Apr-29 18:53:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:53:00 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-29 18:53:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:53:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-29 18:53:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:53:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:53:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:53:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.565 (still bad) 2009-Apr-29 18:53:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-29 18:53:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82381.00 2009-Apr-29 18:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:53:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:53:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.565 (still bad) 2009-Apr-29 18:53:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.562 (still bad) 2009-Apr-29 18:53:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.559 (still bad) 2009-Apr-29 18:53:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.560 (still bad) 2009-Apr-29 18:53:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.561 (still bad) 2009-Apr-29 18:53:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:53:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:53:11 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-29 18:53:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:53:11 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-29 18:53:11 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Apr-29 18:53:11 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-29 18:53:11 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-29 18:53:11 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-29 18:53:11 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-29 18:53:11 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 18:53:11 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-29 18:53:11 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 18:53:11 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-29 18:53:11 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 18:53:11 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 18:53:11 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-29 18:53:11 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-29 18:53:11 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-29 18:53:11 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-29 18:53:11 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-29 18:53:11 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:53:11 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:53:11 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:53:11 LOG2 antvel: Parameters to Doppler: Topocentric 82391 2009 119 0.0 2009-Apr-29 18:53:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:53:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-29 18:53:11 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-29 18:53:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:53:11 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:53:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-29 18:53:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:53:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-29 18:53:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:53:11 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-29 18:53:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-29 18:53:11 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.971111 2009.3279587484474 18.999933 2009-Apr-29 18:53:11 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666700 20.805000000000000 2009-Apr-29 18:53:11 LOG4 log_alfabeam: ALFABEAM 1 8.919758647981158 20.708178695236363 2009-Apr-29 18:53:11 LOG4 log_alfabeam: ALFABEAM 2 8.923205250161070 20.792178908158068 2009-Apr-29 18:53:11 LOG4 log_alfabeam: ALFABEAM 3 8.920271598859623 20.890060797847056 2009-Apr-29 18:53:11 LOG4 log_alfabeam: ALFABEAM 4 8.913472352154354 20.901311174388418 2009-Apr-29 18:53:11 LOG4 log_alfabeam: ALFABEAM 5 8.910017265092458 20.814256885672414 2009-Apr-29 18:53:11 LOG4 log_alfabeam: ALFABEAM 6 8.913366743518610 20.719090377239635 2009-Apr-29 18:53:11 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900036 2009-Apr-29 18:53:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:53:12 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-29 18:53:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:53:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-29 18:53:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:53:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:53:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:53:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-29 18:53:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.558 (still bad) 2009-Apr-29 18:53:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82393.00 2009-Apr-29 18:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:53:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:53:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.474 (still bad) 2009-Apr-29 18:53:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.153 (still bad) 2009-Apr-29 18:53:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.152 (still bad) 2009-Apr-29 18:53:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.150 (still bad) 2009-Apr-29 18:53:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.153 (still bad) 2009-Apr-29 18:53:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:53:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:53:23 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-29 18:53:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:53:23 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-29 18:53:23 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-29 18:53:23 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-29 18:53:23 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-29 18:53:23 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:53:23 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:53:23 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:53:23 LOG2 antvel: Parameters to Doppler: Topocentric 82403 2009 119 0.0 2009-Apr-29 18:53:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:53:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-29 18:53:23 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-29 18:53:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:53:23 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:53:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-29 18:53:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:53:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-29 18:53:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:53:23 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-29 18:53:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-29 18:53:23 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.974453 2009.3279591287044 18.999933 2009-Apr-29 18:53:23 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666687 20.805000000000003 2009-Apr-29 18:53:23 LOG4 log_alfabeam: ALFABEAM 1 8.919884790084806 20.708990414718244 2009-Apr-29 18:53:23 LOG4 log_alfabeam: ALFABEAM 2 8.923221217638757 20.793869250541771 2009-Apr-29 18:53:23 LOG4 log_alfabeam: ALFABEAM 3 8.920159060951011 20.890974649807436 2009-Apr-29 18:53:23 LOG4 log_alfabeam: ALFABEAM 4 8.913347240299515 20.900475855180648 2009-Apr-29 18:53:23 LOG4 log_alfabeam: ALFABEAM 5 8.910006572056991 20.812556398652625 2009-Apr-29 18:53:23 LOG4 log_alfabeam: ALFABEAM 6 8.913478717120388 20.718258785922252 2009-Apr-29 18:53:23 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900037 2009-Apr-29 18:53:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:53:24 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-29 18:53:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:53:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-29 18:53:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:53:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:53:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:53:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-29 18:53:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82405.00 2009-Apr-29 18:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.151 (still bad) 2009-Apr-29 18:53:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:53:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:53:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:53:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:53:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:53:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:53:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:53:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:53:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.150 (still bad) 2009-Apr-29 18:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.144 (still bad) 2009-Apr-29 18:53:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-29 18:53:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.080 0.932 1.096 1.087 2009-Apr-29 18:53:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 0.984 1.121 1.119 2009-Apr-29 18:53:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.145 0.963 1.108 1.066 2009-Apr-29 18:53:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.956 0.107 1.048 0.133 2009-Apr-29 18:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.146 (still bad) 2009-Apr-29 18:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.146 (still bad) 2009-Apr-29 18:53:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:53:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:53:35 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-29 18:53:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:53:35 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-29 18:53:35 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-29 18:53:35 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-29 18:53:35 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-29 18:53:35 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:53:35 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:53:35 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:53:35 LOG2 antvel: Parameters to Doppler: Topocentric 82415 2009 119 0.0 2009-Apr-29 18:53:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:53:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-29 18:53:35 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-29 18:53:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:53:35 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:53:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-29 18:53:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:53:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-29 18:53:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:53:35 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-29 18:53:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-29 18:53:35 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.977796 2009.3279595089614 18.999933 2009-Apr-29 18:53:35 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666696 20.805000000000003 2009-Apr-29 18:53:35 LOG4 log_alfabeam: ALFABEAM 1 8.920008633345311 20.709826030623130 2009-Apr-29 18:53:35 LOG4 log_alfabeam: ALFABEAM 2 8.923234855265989 20.795547249654469 2009-Apr-29 18:53:35 LOG4 log_alfabeam: ALFABEAM 3 8.920046426337242 20.891850756272149 2009-Apr-29 18:53:35 LOG4 log_alfabeam: ALFABEAM 4 8.913224479325720 20.899617438870319 2009-Apr-29 18:53:35 LOG4 log_alfabeam: ALFABEAM 5 8.909998179307648 20.810870974584649 2009-Apr-29 18:53:35 LOG4 log_alfabeam: ALFABEAM 6 8.913590580761038 20.717463804502128 2009-Apr-29 18:53:35 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900038 2009-Apr-29 18:53:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:53:36 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-29 18:53:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-29 18:53:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:53:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:53:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:53:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:53:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-29 18:53:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82417.00 2009-Apr-29 18:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.146 (still bad) 2009-Apr-29 18:53:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:53:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:53:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:53:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:53:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:53:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:53:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:53:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:53:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.147 (still bad) 2009-Apr-29 18:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.141 (still bad) 2009-Apr-29 18:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.141 (still bad) 2009-Apr-29 18:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.142 (still bad) 2009-Apr-29 18:53:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.141 (still bad) 2009-Apr-29 18:53:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:53:47 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-29 18:53:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:53:47 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-29 18:53:47 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-29 18:53:47 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-29 18:53:47 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-29 18:53:47 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:53:47 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:53:47 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:53:47 LOG2 antvel: Parameters to Doppler: Topocentric 82427 2009 119 0.0 2009-Apr-29 18:53:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:53:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-29 18:53:47 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-29 18:53:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:53:47 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:53:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-29 18:53:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:53:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-29 18:53:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:53:47 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-29 18:53:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-29 18:53:47 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.981138 2009.3279598892184 18.999933 2009-Apr-29 18:53:47 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666709 20.804999999999989 2009-Apr-29 18:53:47 LOG4 log_alfabeam: ALFABEAM 1 8.920130037520238 20.710683384015095 2009-Apr-29 18:53:47 LOG4 log_alfabeam: ALFABEAM 2 8.923246209810932 20.797210431067228 2009-Apr-29 18:53:47 LOG4 log_alfabeam: ALFABEAM 3 8.919933890537962 20.892688758343951 2009-Apr-29 18:53:47 LOG4 log_alfabeam: ALFABEAM 4 8.913104204961719 20.898738120091139 2009-Apr-29 18:53:47 LOG4 log_alfabeam: ALFABEAM 5 8.909992027025989 20.809203022388548 2009-Apr-29 18:53:47 LOG4 log_alfabeam: ALFABEAM 6 8.913702147456808 20.716705611289388 2009-Apr-29 18:53:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900039 2009-Apr-29 18:53:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:53:48 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-29 18:53:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:53:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-29 18:53:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:53:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:53:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:53:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-29 18:53:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82429.00 2009-Apr-29 18:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.141 (still bad) 2009-Apr-29 18:53:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:53:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:53:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:53:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:53:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:53:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:53:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:53:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:53:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-29 18:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-29 18:53:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-29 18:53:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-29 18:53:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:53:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:53:59 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-29 18:53:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:53:59 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-29 18:53:59 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-29 18:53:59 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-29 18:53:59 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-29 18:53:59 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:53:59 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:53:59 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:53:59 LOG2 antvel: Parameters to Doppler: Topocentric 82439 2009 119 0.0 2009-Apr-29 18:53:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:53:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-29 18:53:59 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-29 18:53:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:53:59 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:53:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-29 18:53:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:53:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-29 18:53:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:53:59 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-29 18:53:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-29 18:53:59 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.984481 2009.3279602694754 18.999933 2009-Apr-29 18:53:59 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666689 20.804999999999993 2009-Apr-29 18:53:59 LOG4 log_alfabeam: ALFABEAM 1 8.920249018238545 20.711561320973203 2009-Apr-29 18:53:59 LOG4 log_alfabeam: ALFABEAM 2 8.923255347767014 20.798858408931995 2009-Apr-29 18:53:59 LOG4 log_alfabeam: ALFABEAM 3 8.919821509928830 20.893489427420882 2009-Apr-29 18:53:59 LOG4 log_alfabeam: ALFABEAM 4 8.912986398355702 20.897839057342573 2009-Apr-29 18:53:59 LOG4 log_alfabeam: ALFABEAM 5 8.909988042507702 20.807552847185121 2009-Apr-29 18:53:59 LOG4 log_alfabeam: ALFABEAM 6 8.913813368798964 20.715983361488000 2009-Apr-29 18:53:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900040 2009-Apr-29 18:54:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:54:00 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-29 18:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-29 18:54:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:54:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-29 18:54:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:54:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:54:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:54:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-29 18:54:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82441.00 2009-Apr-29 18:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-29 18:54:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 18:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.109 (still bad) 2009-Apr-29 18:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.110 (still bad) 2009-Apr-29 18:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-29 18:54:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:54:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:54:11 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-29 18:54:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:54:11 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-29 18:54:11 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-29 18:54:11 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-29 18:54:11 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-29 18:54:11 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:54:11 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:54:11 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:54:11 LOG2 antvel: Parameters to Doppler: Topocentric 82451 2009 119 0.0 2009-Apr-29 18:54:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:54:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-29 18:54:11 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-29 18:54:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:54:11 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:54:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-29 18:54:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:54:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-29 18:54:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:54:11 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-29 18:54:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-29 18:54:11 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.987823 2009.3279606497326 18.999933 2009-Apr-29 18:54:11 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666696 20.804999999999993 2009-Apr-29 18:54:11 LOG4 log_alfabeam: ALFABEAM 1 8.920365456303291 20.712457651924851 2009-Apr-29 18:54:11 LOG4 log_alfabeam: ALFABEAM 2 8.923262327529978 20.800488909467063 2009-Apr-29 18:54:11 LOG4 log_alfabeam: ALFABEAM 3 8.919709470513432 20.894252652067024 2009-Apr-29 18:54:11 LOG4 log_alfabeam: ALFABEAM 4 8.912871174101834 20.896922466328576 2009-Apr-29 18:54:11 LOG4 log_alfabeam: ALFABEAM 5 8.909986155575846 20.805922639294334 2009-Apr-29 18:54:11 LOG4 log_alfabeam: ALFABEAM 6 8.913924068406580 20.715297009671726 2009-Apr-29 18:54:11 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900041 2009-Apr-29 18:54:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:54:12 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-29 18:54:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:54:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-29 18:54:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:54:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:54:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-29 18:54:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-29 18:54:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82453.00 2009-Apr-29 18:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:54:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-29 18:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-29 18:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-29 18:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-29 18:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.109 (still bad) 2009-Apr-29 18:54:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:54:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:54:23 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-29 18:54:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:54:23 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-29 18:54:23 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-29 18:54:23 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-29 18:54:23 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-29 18:54:23 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:54:23 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:54:23 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:54:23 LOG2 antvel: Parameters to Doppler: Topocentric 82463 2009 119 0.0 2009-Apr-29 18:54:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:54:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-29 18:54:23 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-29 18:54:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:54:23 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:54:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-29 18:54:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:54:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-29 18:54:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:54:23 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-29 18:54:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-29 18:54:23 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.991166 2009.3279610299896 18.999933 2009-Apr-29 18:54:23 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666719 20.805000000000007 2009-Apr-29 18:54:23 LOG4 log_alfabeam: ALFABEAM 1 8.920479382127464 20.713371259023951 2009-Apr-29 18:54:23 LOG4 log_alfabeam: ALFABEAM 2 8.923267220794827 20.802101714800418 2009-Apr-29 18:54:23 LOG4 log_alfabeam: ALFABEAM 3 8.919597818780476 20.894979347422638 2009-Apr-29 18:54:23 LOG4 log_alfabeam: ALFABEAM 4 8.912758498634496 20.895989462194365 2009-Apr-29 18:54:23 LOG4 log_alfabeam: ALFABEAM 5 8.909986289527335 20.804312525976936 2009-Apr-29 18:54:23 LOG4 log_alfabeam: ALFABEAM 6 8.914034208225972 20.714645587978616 2009-Apr-29 18:54:23 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900042 2009-Apr-29 18:54:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:54:24 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-29 18:54:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:54:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-29 18:54:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:54:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:54:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:54:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-29 18:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-29 18:54:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82465.00 2009-Apr-29 18:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:54:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.106 (still bad) 2009-Apr-29 18:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.107 (still bad) 2009-Apr-29 18:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-29 18:54:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 18:54:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.041 0.910 1.057 1.062 2009-Apr-29 18:54:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.966 1.067 1.102 2009-Apr-29 18:54:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.950 1.043 1.033 2009-Apr-29 18:54:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.106 1.030 0.132 2009-Apr-29 18:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-29 18:54:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:54:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:54:35 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-29 18:54:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:54:35 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-29 18:54:35 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-29 18:54:35 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-29 18:54:35 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-29 18:54:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 18:54:35 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-29 18:54:35 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 18:54:35 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-29 18:54:35 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 18:54:35 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 18:54:35 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-29 18:54:35 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-29 18:54:35 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-29 18:54:35 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-29 18:54:35 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:54:35 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:54:35 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:54:35 LOG2 antvel: Parameters to Doppler: Topocentric 82475 2009 119 0.0 2009-Apr-29 18:54:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:54:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-29 18:54:35 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-29 18:54:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:54:35 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:54:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-29 18:54:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:54:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-29 18:54:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:54:35 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-29 18:54:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-29 18:54:35 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.994508 2009.3279614102466 18.999933 2009-Apr-29 18:54:35 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666668 20.805000000000000 2009-Apr-29 18:54:35 LOG4 log_alfabeam: ALFABEAM 1 8.920590696782179 20.714299960947471 2009-Apr-29 18:54:35 LOG4 log_alfabeam: ALFABEAM 2 8.923270095200362 20.803694762643204 2009-Apr-29 18:54:35 LOG4 log_alfabeam: ALFABEAM 3 8.919486729433492 20.895669620152123 2009-Apr-29 18:54:35 LOG4 log_alfabeam: ALFABEAM 4 8.912648466304566 20.895042243395288 2009-Apr-29 18:54:35 LOG4 log_alfabeam: ALFABEAM 5 8.909988366322452 20.802724472140397 2009-Apr-29 18:54:35 LOG4 log_alfabeam: ALFABEAM 6 8.914143623916519 20.714028857262498 2009-Apr-29 18:54:35 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900043 2009-Apr-29 18:54:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:54:36 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-29 18:54:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:54:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-29 18:54:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:54:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:54:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:54:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-29 18:54:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82477.00 2009-Apr-29 18:54:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-29 18:54:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:54:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:54:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:54:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:54:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:54:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:54:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:54:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:54:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:54:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.626 (still bad) 2009-Apr-29 18:54:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.626 (still bad) 2009-Apr-29 18:54:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.628 (still bad) 2009-Apr-29 18:54:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.627 (still bad) 2009-Apr-29 18:54:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.626 (still bad) 2009-Apr-29 18:54:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:54:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:54:47 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-29 18:54:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:54:47 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-29 18:54:47 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-29 18:54:47 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-29 18:54:47 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-29 18:54:47 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:54:47 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:54:47 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:54:47 LOG2 antvel: Parameters to Doppler: Topocentric 82487 2009 119 0.0 2009-Apr-29 18:54:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:54:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-29 18:54:47 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-29 18:54:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:54:47 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:54:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-29 18:54:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:54:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-29 18:54:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:54:47 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-29 18:54:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-29 18:54:47 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 8.997851 2009.3279617905037 18.999933 2009-Apr-29 18:54:47 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666671 20.805000000000000 2009-Apr-29 18:54:47 LOG4 log_alfabeam: ALFABEAM 1 8.920699444256938 20.715242704351763 2009-Apr-29 18:54:47 LOG4 log_alfabeam: ALFABEAM 2 8.923271025596076 20.805268004541908 2009-Apr-29 18:54:47 LOG4 log_alfabeam: ALFABEAM 3 8.919376238106953 20.896324500633579 2009-Apr-29 18:54:47 LOG4 log_alfabeam: ALFABEAM 4 8.912541030127517 20.894081854036138 2009-Apr-29 18:54:47 LOG4 log_alfabeam: ALFABEAM 5 8.909992307345709 20.801158429328471 2009-Apr-29 18:54:47 LOG4 log_alfabeam: ALFABEAM 6 8.914252288454191 20.713445754785937 2009-Apr-29 18:54:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900044 2009-Apr-29 18:54:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:54:48 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-29 18:54:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:54:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-29 18:54:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:54:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:54:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:54:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-29 18:54:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82489.00 2009-Apr-29 18:54:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.628 (still bad) 2009-Apr-29 18:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:54:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:54:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.621 (still bad) 2009-Apr-29 18:54:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.620 (still bad) 2009-Apr-29 18:54:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.618 (still bad) 2009-Apr-29 18:54:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.618 (still bad) 2009-Apr-29 18:54:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:54:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:54:59 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-29 18:54:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:54:59 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-29 18:54:59 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-29 18:54:59 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-29 18:54:59 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-29 18:54:59 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:54:59 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:54:59 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:54:59 LOG2 antvel: Parameters to Doppler: Topocentric 82499 2009 119 0.0 2009-Apr-29 18:54:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:54:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-29 18:54:59 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-29 18:54:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:54:59 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:54:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-29 18:54:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:54:59 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-29 18:54:59 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:54:59 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-29 18:54:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-29 18:54:59 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 9.001193 2009.3279621707607 18.999933 2009-Apr-29 18:54:59 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666682 20.804999999999993 2009-Apr-29 18:54:59 LOG4 log_alfabeam: ALFABEAM 1 8.920805544661006 20.716197349715983 2009-Apr-29 18:54:59 LOG4 log_alfabeam: ALFABEAM 2 8.923270086535465 20.806819593364832 2009-Apr-29 18:54:59 LOG4 log_alfabeam: ALFABEAM 3 8.919266506963773 20.896944282084633 2009-Apr-29 18:54:59 LOG4 log_alfabeam: ALFABEAM 4 8.912436265537304 20.893110442575381 2009-Apr-29 18:54:59 LOG4 log_alfabeam: ALFABEAM 5 8.909998029069250 20.799616137321653 2009-Apr-29 18:54:59 LOG4 log_alfabeam: ALFABEAM 6 8.914360050455715 20.712895878931374 2009-Apr-29 18:54:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900045 2009-Apr-29 18:55:00 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:55:00 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-29 18:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.617 (still bad) 2009-Apr-29 18:55:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:55:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-29 18:55:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:55:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:55:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:55:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-29 18:55:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82501.00 2009-Apr-29 18:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.611 (still bad) 2009-Apr-29 18:55:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.612 (still bad) 2009-Apr-29 18:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.613 (still bad) 2009-Apr-29 18:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.612 (still bad) 2009-Apr-29 18:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.616 (still bad) 2009-Apr-29 18:55:11 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:55:11 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:55:11 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-29 18:55:11 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:55:11 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-29 18:55:11 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-29 18:55:11 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-29 18:55:11 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-29 18:55:11 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:55:11 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:55:11 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:55:11 LOG2 antvel: Parameters to Doppler: Topocentric 82511 2009 119 0.0 2009-Apr-29 18:55:11 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:55:11 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-29 18:55:11 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-29 18:55:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:55:11 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:55:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-29 18:55:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:55:11 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-29 18:55:11 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:55:11 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-29 18:55:11 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-29 18:55:11 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 9.004536 2009.3279625510179 18.999933 2009-Apr-29 18:55:11 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666663 20.805000000000010 2009-Apr-29 18:55:11 LOG4 log_alfabeam: ALFABEAM 1 8.920909054040731 20.717162931155137 2009-Apr-29 18:55:11 LOG4 log_alfabeam: ALFABEAM 2 8.923267354106059 20.808349645697941 2009-Apr-29 18:55:11 LOG4 log_alfabeam: ALFABEAM 3 8.919157560293492 20.897530081056804 2009-Apr-29 18:55:11 LOG4 log_alfabeam: ALFABEAM 4 8.912334113719419 20.892128960023392 2009-Apr-29 18:55:11 LOG4 log_alfabeam: ALFABEAM 5 8.910005452866578 20.798097379687444 2009-Apr-29 18:55:11 LOG4 log_alfabeam: ALFABEAM 6 8.914466894156462 20.712378100072716 2009-Apr-29 18:55:11 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900046 2009-Apr-29 18:55:12 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:55:12 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-29 18:55:12 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:55:12 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-29 18:55:12 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:55:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:55:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.612 (still bad) 2009-Apr-29 18:55:12 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-29 18:55:12 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82513.00 2009-Apr-29 18:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:55:14 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.598 (still bad) 2009-Apr-29 18:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.599 (still bad) 2009-Apr-29 18:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.596 (still bad) 2009-Apr-29 18:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.596 (still bad) 2009-Apr-29 18:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.597 (still bad) 2009-Apr-29 18:55:23 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:55:23 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:55:23 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-29 18:55:23 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:55:23 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-29 18:55:23 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-29 18:55:23 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-29 18:55:23 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-29 18:55:23 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:55:23 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:55:23 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:55:23 LOG2 antvel: Parameters to Doppler: Topocentric 82523 2009 119 0.0 2009-Apr-29 18:55:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:55:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-29 18:55:23 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-29 18:55:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:55:23 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:55:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-29 18:55:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:55:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-29 18:55:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:55:23 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-29 18:55:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-29 18:55:23 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 9.007878 2009.3279629312749 18.999933 2009-Apr-29 18:55:23 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666663 20.805000000000003 2009-Apr-29 18:55:23 LOG4 log_alfabeam: ALFABEAM 1 8.921009909983336 20.718137378587915 2009-Apr-29 18:55:23 LOG4 log_alfabeam: ALFABEAM 2 8.923262907593745 20.809856527001411 2009-Apr-29 18:55:23 LOG4 log_alfabeam: ALFABEAM 3 8.919049546990061 20.898082345258782 2009-Apr-29 18:55:23 LOG4 log_alfabeam: ALFABEAM 4 8.912234632829280 20.891139478166156 2009-Apr-29 18:55:23 LOG4 log_alfabeam: ALFABEAM 5 8.910014491894605 20.796603677330161 2009-Apr-29 18:55:23 LOG4 log_alfabeam: ALFABEAM 6 8.914572681570908 20.711891885104574 2009-Apr-29 18:55:23 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900047 2009-Apr-29 18:55:24 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:55:24 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-29 18:55:24 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:55:24 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-29 18:55:24 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:55:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:55:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:55:24 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-29 18:55:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.595 (still bad) 2009-Apr-29 18:55:24 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82525.00 2009-Apr-29 18:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:55:26 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:55:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.568 (still bad) 2009-Apr-29 18:55:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.569 (still bad) 2009-Apr-29 18:55:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.567 (still bad) 2009-Apr-29 18:55:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.570 (still bad) 2009-Apr-29 18:55:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-29 18:55:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.463 1.254 1.470 1.476 2009-Apr-29 18:55:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.405 1.357 1.507 1.533 2009-Apr-29 18:55:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.565 1.347 1.489 1.404 2009-Apr-29 18:55:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.347 0.107 1.477 0.132 2009-Apr-29 18:55:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:55:35 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:55:35 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-29 18:55:35 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:55:35 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-29 18:55:35 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-29 18:55:35 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-29 18:55:35 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-29 18:55:35 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:55:35 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:55:35 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:55:35 LOG2 antvel: Parameters to Doppler: Topocentric 82535 2009 119 0.0 2009-Apr-29 18:55:35 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:55:35 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-29 18:55:35 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-29 18:55:35 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:55:35 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:55:35 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-29 18:55:35 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:55:35 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-29 18:55:35 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:55:35 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-29 18:55:35 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-29 18:55:35 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 9.011220 2009.3279633115319 18.999933 2009-Apr-29 18:55:35 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666712 20.805000000000003 2009-Apr-29 18:55:35 LOG4 log_alfabeam: ALFABEAM 1 8.921108149869443 20.719119535951080 2009-Apr-29 18:55:35 LOG4 log_alfabeam: ALFABEAM 2 8.923256824662683 20.811340069386098 2009-Apr-29 18:55:35 LOG4 log_alfabeam: ALFABEAM 3 8.918942511810148 20.898602098442211 2009-Apr-29 18:55:35 LOG4 log_alfabeam: ALFABEAM 4 8.912137782578224 20.890143137663827 2009-Apr-29 18:55:35 LOG4 log_alfabeam: ALFABEAM 5 8.910025065789396 20.795135093623255 2009-Apr-29 18:55:35 LOG4 log_alfabeam: ALFABEAM 6 8.914677376876842 20.711436195954807 2009-Apr-29 18:55:35 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900048 2009-Apr-29 18:55:36 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:55:36 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-29 18:55:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:55:36 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-29 18:55:36 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:55:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:55:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:55:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-29 18:55:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82537.00 2009-Apr-29 18:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.567 (still bad) 2009-Apr-29 18:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:55:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.564 (still bad) 2009-Apr-29 18:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.561 (still bad) 2009-Apr-29 18:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.564 (still bad) 2009-Apr-29 18:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.564 (still bad) 2009-Apr-29 18:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.564 (still bad) 2009-Apr-29 18:55:47 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:55:47 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:55:47 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-29 18:55:47 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:55:47 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-29 18:55:47 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-29 18:55:47 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-29 18:55:47 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-29 18:55:47 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:55:47 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:55:47 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:55:47 LOG2 antvel: Parameters to Doppler: Topocentric 82547 2009 119 0.0 2009-Apr-29 18:55:47 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:55:47 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-29 18:55:47 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-29 18:55:47 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:55:47 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:55:47 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-29 18:55:47 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:55:47 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-29 18:55:47 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-29 18:55:47 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-29 18:55:47 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-29 18:55:47 LOG5 log_alfabeam: Parameters: 8.9166666666666661 20.805 9.014563 2009.3279636917889 18.999933 2009-Apr-29 18:55:47 LOG4 log_alfabeam: ALFABEAM 0 8.916666666666696 20.804999999999993 2009-Apr-29 18:55:47 LOG4 log_alfabeam: ALFABEAM 1 8.921203814006443 20.720108308874174 2009-Apr-29 18:55:47 LOG4 log_alfabeam: ALFABEAM 2 8.923249181186911 20.812800164314694 2009-Apr-29 18:55:47 LOG4 log_alfabeam: ALFABEAM 3 8.918836494486671 20.899090363853126 2009-Apr-29 18:55:47 LOG4 log_alfabeam: ALFABEAM 4 8.912043519911910 20.889141016050814 2009-Apr-29 18:55:47 LOG4 log_alfabeam: ALFABEAM 5 8.910037096466057 20.793691634670949 2009-Apr-29 18:55:47 LOG4 log_alfabeam: ALFABEAM 6 8.914780948984880 20.711010001925349 2009-Apr-29 18:55:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911900049 2009-Apr-29 18:55:48 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-29 18:55:48 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-29 18:55:48 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:55:48 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-29 18:55:48 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:55:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:55:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:55:48 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-29 18:55:48 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82549.00 2009-Apr-29 18:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.563 (still bad) 2009-Apr-29 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:55:50 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.558 (still bad) 2009-Apr-29 18:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.556 (still bad) 2009-Apr-29 18:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.555 (still bad) 2009-Apr-29 18:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.556 (still bad) 2009-Apr-29 18:55:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 18:55:59 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-29 18:55:59 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-29 18:55:59 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-29 18:55:59 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-29 18:55:59 INFO2 smartfreq: Switching off CAL 2009-Apr-29 18:55:59 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-29 18:55:59 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-29 18:55:59 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 18:55:59 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-29 18:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.557 (still bad) 2009-Apr-29 18:55:59 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 18:55:59 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-29 18:55:59 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 18:55:59 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 18:55:59 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-29 18:55:59 INFO3 restore_frequencies: Restoring original frequencies 2009-Apr-29 18:55:59 LOG5 antvel: Calling 'antvel 85500.000000 204818.000000 J Topocentric 0' 2009-Apr-29 18:55:59 LOG2 antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:55:59 LOG2 antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:55:59 LOG2 antvel: Parameters to Doppler: Topocentric 82559 2009 119 0.0 2009-Apr-29 18:55:59 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:55:59 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-29 18:55:59 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-29 18:55:59 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:55:59 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:55:59 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-29 18:55:59 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:55:59 STOP finish_task: Finishing task 'smart frequency switching' 2009-Apr-29 18:55:59 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-29 18:55:59 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Apr-29 18:55:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-29 18:55:59 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Apr-29 18:55:59 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-29 18:55:59 NOTE run_command_file: DONE with command file processing 2009-Apr-29 18:55:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-29 18:55:59 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-29 18:55:59 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-29 18:55:59 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Apr-29 18:56:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-29 18:56:00 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Apr-29 18:56:00 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-29 18:56:00 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-29 18:56:00 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:56:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:56:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:56:07 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-29 18:56:07 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-29 18:56:07 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-29 18:56:07 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-29 18:56:07 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-29 18:56:07 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-29 18:56:07 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-29 18:56:07 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-29 18:56:07 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-29 18:56:07 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-29 18:56:08 LOG3 exec_msg: Closing socket 2009-Apr-29 18:56:08 LOG3 exec_msg: Closing socket 2009-Apr-29 18:56:08 LOG3 exec_msg: Closing socket 2009-Apr-29 18:56:08 LOG3 exec_msg: Closing socket 2009-Apr-29 18:56:10 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-29 18:56:10 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-29 18:56:10 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-29 18:56:10 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-29 18:56:19 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Apr-29 18:56:20 LOG2 CIMA-antvel: Precessing RA = 08:55:00.0 Dec = +20:48:18.0 Epoch = 2009.32796 J 2009-Apr-29 18:56:20 LOG2 CIMA-antvel: Computed apparent RA = 08:55:33.1 Dec = +20:46:09.8 2009-Apr-29 18:56:20 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 82579 2009 119 0.0 2009-Apr-29 18:56:20 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-29 18:56:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-29 18:56:21 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Apr-29 18:56:21 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Apr-29 18:56:21 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-29 18:56:21 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-29 18:56:21 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-29 18:56:21 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-29 18:56:22 LOG1 config_iflo: Receiver ALFA already selected 2009-Apr-29 18:56:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-29 18:56:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-29 18:56:22 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-29 18:56:22 LOG5 begin_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-29 18:56:22 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-29 18:56:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-29 18:56:22 LOG5 end_task: Level: (2) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-29 18:56:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-29 18:56:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-29 18:56:22 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Apr-29 18:56:22 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Apr-29 18:56:22 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-29 18:56:22 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-29 18:56:22 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Apr-29 18:56:22 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Apr-29 18:56:22 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Apr-29 18:56:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-29 18:56:22 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Apr-29 18:56:22 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Apr-29 18:56:22 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-29 18:56:22 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-29 18:56:22 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-29 18:56:22 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-29 18:56:22 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-29 18:56:22 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Apr-29 18:56:22 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Apr-29 18:56:22 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Apr-29 18:56:22 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Apr-29 18:56:22 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-29 18:56:22 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Apr-29 18:56:22 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Apr-29 18:56:22 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-29 18:56:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:56:22 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Apr-29 18:56:22 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Apr-29 18:56:22 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-29 18:56:22 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Apr-29 18:56:22 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Apr-29 18:56:22 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-29 18:56:22 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:56:22 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-29 18:56:22 LOG5 begin_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-29 18:56:22 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-29 18:56:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-29 18:56:22 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:56:22 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:56:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:56:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:56:22 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Apr-29 18:56:22 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-29 18:56:22 LOG5 end_task: Level: (2) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-29 18:56:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-29 18:56:22 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-29 18:56:22 LOG5 finish_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-29 18:56:22 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-29 18:56:22 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-29 18:56:22 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-29 18:56:22 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-29 18:56:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:56:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-29 18:56:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-29 18:56:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-29 18:56:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-29 18:56:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-29 18:56:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-29 18:56:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-29 18:56:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-29 18:56:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-29 18:56:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-29 18:56:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-29 18:56:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-29 18:56:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-29 18:56:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-29 18:56:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-29 18:56:23 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-29 18:56:23 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-29 18:56:23 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-29 18:56:23 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-29 18:56:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-29 18:56:23 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-29 18:56:23 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-29 18:56:23 START begin_task: Starting task 'selecting calibration port' 2009-Apr-29 18:56:23 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-29 18:56:23 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-29 18:56:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-29 18:56:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:56:23 START begin_task: Starting task 'waiting on calport' 2009-Apr-29 18:56:23 LOG5 begin_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-29 18:56:23 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Apr-29 18:56:23 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-29 18:56:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:56:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:56:23 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-29 18:56:23 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-29 18:56:23 LOG5 end_task: Level: (3) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-29 18:56:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-29 18:56:23 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-29 18:56:23 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-29 18:56:23 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-29 18:56:23 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-29 18:56:23 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 18:56:23 LOG5 begin_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-29 18:56:24 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 18:56:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:56:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-29 18:56:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 18:56:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 18:56:24 LOG5 end_task: Level: (2) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-29 18:56:24 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-29 18:56:24 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-29 18:56:24 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-29 18:56:24 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-29 18:56:24 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-29 18:56:24 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-29 18:56:24 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-29 18:56:24 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-29 18:56:24 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:56:24 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:56:24 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:56:24 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:56:24 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-29 18:56:24 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-29 18:56:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 18:56:24 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-29 18:56:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-29 18:56:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-29 18:56:24 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 18:56:24 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-29 18:56:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-29 18:56:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 18:56:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 18:56:24 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-29 18:56:24 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-29 18:56:24 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-29 18:56:24 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-29 18:56:24 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-29 18:56:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-29 18:56:24 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-29 18:56:24 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-29 18:56:24 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-29 18:56:24 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Apr-29 18:56:24 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Apr-29 18:56:24 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-29 18:56:24 LOG5 begin_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-29 18:56:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-29 18:56:24 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-29 18:56:24 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-29 18:56:24 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-29 18:56:24 LOG5 finish_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-29 18:56:24 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-29 18:56:24 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-29 18:56:24 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-29 18:56:24 LOG5 end_task: Level: (1) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-29 18:56:25 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-29 18:56:25 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-29 18:56:25 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Apr-29 18:56:42 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Apr-29 18:56:42 LOG4 exec_msg: From OBSERVER: track_new_source drift86p1 090200.0 +204818 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Apr-29 18:56:42 LOG1 track_new_source: Calling 'track_new_source drift86p1 090200.0 +204818 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Apr-29 18:56:42 BEGIN begin_task: Starting task 'selecting new source' 2009-Apr-29 18:56:42 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-29 18:56:42 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {drift86p1} INFO {Selecting source 'drift86p1' ...} 2009-Apr-29 18:56:42 LOG3 track_source: Calling 'track_source drift86p1 090200.0 +204818 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-29 18:56:42 START begin_task: Starting task 'sending tracking commands' 2009-Apr-29 18:56:42 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-29 18:56:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift86p1} INFO {Slewing to source 'drift86p1' ...} 2009-Apr-29 18:56:42 INFO1 track_source: Starting to track drift86p1 2009-Apr-29 18:56:42 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift86p1" 2009-Apr-29 18:56:42 LOG3 vw_send: To DATATAKING: set ra 090200.0 2009-Apr-29 18:56:42 LOG3 vw_send: To DATATAKING: set dec +204818 2009-Apr-29 18:56:42 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-29 18:56:42 LOG3 vw_send: To DATATAKING: pnt tr 090200.0 +204818 -CJ 2009-Apr-29 18:56:42 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-29 18:56:42 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-29 18:56:42 LOG5 finish_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-29 18:56:42 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-29 18:56:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-29 18:56:42 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-29 18:56:42 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-29 18:56:42 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Apr-29 18:56:42 START begin_task: Starting task 'applying pointing corrections' 2009-Apr-29 18:56:42 LOG5 begin_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-29 18:56:42 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Apr-29 18:56:42 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-29 18:56:42 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Apr-29 18:56:42 LOG5 finish_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-29 18:56:42 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Apr-29 18:56:42 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-29 18:56:42 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Apr-29 18:56:42 LOG5 end_task: Level: (2) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-29 18:56:42 STOP finish_task: Finishing task 'selecting new source' 2009-Apr-29 18:56:42 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-29 18:56:42 DONE finish_task: DONE finished selecting: new source 2009-Apr-29 18:56:42 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-29 18:56:42 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Apr-29 18:56:42 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-29 18:56:42 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift86p1" 2009-Apr-29 18:56:42 LOG4 got_cormsg: From DATATAKING: set ra 090200.0 2009-Apr-29 18:56:42 LOG4 got_cormsg: From DATATAKING: set dec +204818 2009-Apr-29 18:56:42 LOG4 got_cormsg: From DATATAKING: vw% 090200.0 2009-Apr-29 18:56:42 LOG4 got_cormsg: From DATATAKING: vw% +204818 2009-Apr-29 18:56:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:56:42 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-29 18:56:42 LOG4 got_cormsg: From DATATAKING: pnt tr 090200.0 +204818 -CJ 2009-Apr-29 18:56:42 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-29 18:56:42 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-29 18:56:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:56:42 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-29 18:56:42 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:56:47 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-29 18:56:47 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-29 18:56:47 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-29 18:56:47 LOG5 begin_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-29 18:56:47 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-29 18:56:47 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-29 18:56:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-29 18:56:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-29 18:56:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:56:47 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-29 18:56:47 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-29 18:56:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-29 18:56:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:56:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:56:50 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-29 18:56:50 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-29 18:56:50 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-29 18:56:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-29 18:56:50 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-29 18:56:50 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-29 18:56:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-29 18:56:50 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-29 18:56:50 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-29 18:56:50 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-29 18:56:50 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-29 18:56:50 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-29 18:56:50 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-29 18:56:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-29 18:56:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:56:50 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-29 18:56:50 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 2 dB 2009-Apr-29 18:56:50 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-29 18:56:50 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-29 18:56:50 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-29 18:56:50 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-29 18:56:50 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-29 18:56:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.055 0.921 ALFA beam 1: 1.068 1.076 2009-Apr-29 18:56:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.005 0.981 ALFA beam 3: 1.069 1.094 2009-Apr-29 18:56:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.098 0.941 ALFA beam 5: 1.068 1.034 2009-Apr-29 18:56:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.929 0.104 ALFA beam 7: 1.024 0.129 2009-Apr-29 18:56:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-29 18:56:50 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-29 18:56:50 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-29 18:56:51 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-29 18:56:51 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-29 18:56:51 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-29 18:56:51 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-29 18:56:51 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-29 18:56:51 LOG5 finish_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-29 18:56:51 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-29 18:56:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-29 18:56:51 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-29 18:56:51 LOG5 end_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-29 18:56:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.104 < 0.75)! 2009-Apr-29 18:56:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.055 0.921 1.068 1.076 2009-Apr-29 18:56:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.981 1.069 1.094 2009-Apr-29 18:56:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.098 0.941 1.068 1.034 2009-Apr-29 18:56:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.929 0.104 1.024 0.129 2009-Apr-29 18:56:54 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-29 18:56:54 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift86p1 090200.0 +204818 J 0 Topocentric velocity(optical) 2009-Apr-29 18:56:54 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift86p1 090200.0 +204818 J 0 Topocentric velocity(optical)' 2009-Apr-29 18:56:54 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-29 18:56:54 LOG5 begin_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-29 18:56:54 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift86p1' 2009-Apr-29 18:56:55 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-29 18:56:55 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift86p1} 2009-Apr-29 18:56:55 INFO5 fixed_driftmap: Start: year = 2009.3279658148908 RA = 09:02:33.1 Dec = +20:46:05.5 2009-Apr-29 18:56:55 NOTE fixed_driftmap: Setting ZA to 2:24:51.8 ... 2009-Apr-29 18:56:55 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 2.41 2009-Apr-29 18:56:55 LOG3 track_source: Calling 'track_source drift86p1 180.0 2.4143882001 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-29 18:56:55 START begin_task: Starting task 'sending tracking commands' 2009-Apr-29 18:56:55 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-29 18:56:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift86p1} INFO {Slewing to source 'drift86p1' ...} 2009-Apr-29 18:56:55 INFO1 track_source: Starting to track drift86p1 2009-Apr-29 18:56:55 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift86p1" 2009-Apr-29 18:56:55 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-29 18:56:55 LOG3 vw_send: To DATATAKING: set dec 2.4143882001 2009-Apr-29 18:56:55 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-29 18:56:55 LOG3 vw_send: To DATATAKING: pnt tr 180.0 2.4143882001 -CF 2009-Apr-29 18:56:55 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-29 18:56:55 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-29 18:56:55 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-29 18:56:55 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-29 18:56:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-29 18:56:55 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-29 18:56:55 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-29 18:56:55 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-29 18:56:55 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-29 18:56:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-29 18:56:55 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-29 18:56:55 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-29 18:56:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-29 18:56:55 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-29 18:56:55 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-29 18:56:55 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift86p1" 2009-Apr-29 18:56:55 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-29 18:56:55 LOG4 got_cormsg: From DATATAKING: set dec 2.4143882001 2009-Apr-29 18:56:55 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-29 18:56:55 LOG4 got_cormsg: From DATATAKING: vw% 2.4143882001 2009-Apr-29 18:56:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:56:55 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-29 18:56:55 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 2.4143882001 -CF 2009-Apr-29 18:56:55 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-29 18:56:55 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-29 18:56:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:56:56 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-29 18:56:56 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-29 18:56:56 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-29 18:56:56 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-29 18:56:56 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-29 18:56:56 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-29 18:56:56 LOG5 finish_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-29 18:56:56 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-29 18:56:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-29 18:56:56 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-29 18:56:56 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-29 18:56:56 START begin_task: Starting task 'waiting on telescope' 2009-Apr-29 18:56:56 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-29 18:56:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-29 18:56:56 LOG3 waittrk: Start waittrk 5 2009-Apr-29 18:56:56 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-29 18:56:56 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-29 18:57:01 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-29 18:57:01 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-29 18:57:01 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-29 18:57:01 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-29 18:58:10 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-29 18:58:10 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-29 18:58:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-29 18:58:10 INFO2 waittrk: Now tracking drift86p1 2009-Apr-29 18:58:10 LOG4 waittrk: Current telescope position: Az = 179.82 ZA = 2.43 2009-Apr-29 18:58:10 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-29 18:58:10 LOG5 finish_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-29 18:58:10 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-29 18:58:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-29 18:58:10 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-29 18:58:10 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-29 18:58:10 START begin_task: Starting task 'selecting calibration type' 2009-Apr-29 18:58:10 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-29 18:58:10 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-29 18:58:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-29 18:58:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:58:10 START begin_task: Starting task 'waiting on setcal' 2009-Apr-29 18:58:10 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-29 18:58:10 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-29 18:58:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:58:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:58:10 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-29 18:58:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-29 18:58:10 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-29 18:58:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-29 18:58:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-29 18:58:10 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-29 18:58:10 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-29 18:58:10 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-29 18:58:10 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-29 18:58:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-29 18:58:10 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-29 18:58:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-29 18:58:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-29 18:58:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-29 18:58:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-29 18:58:10 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-29 18:58:10 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-29 18:58:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:58:10 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-29 18:58:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-29 18:58:10 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-29 18:58:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-29 18:58:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-29 18:58:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-29 18:58:10 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-29 18:58:10 LOG5 dopset_later: Calling 'dopset_later 0' 2009-Apr-29 18:58:10 INFO3 dopset_later: Setting Doppler correction now 2009-Apr-29 18:58:10 LOG5 antvel: Calling 'antvel 180.000000 2.414388 F Topocentric 0' 2009-Apr-29 18:58:10 LOG2 antvel: Transforming current Az = 180.00 ZA = 2.41 to apparent RA = 09:03:15.8 Dec = +20:46:05.5 2009-Apr-29 18:58:10 LOG2 antvel: Parameters to Doppler: Topocentric 82690 2009 119 0.0 2009-Apr-29 18:58:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-29 18:58:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-29 18:58:10 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-29 18:58:11 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-29 18:58:11 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-29 18:58:11 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-29 18:58:11 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:58:11 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-29 18:58:11 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-29 18:58:11 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-29 18:58:11 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-29 18:58:11 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-29 18:58:11 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-29 18:58:11 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:58:11 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-29 18:58:11 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-29 18:58:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-29 18:58:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-29 18:58:11 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-29 18:58:11 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 18:58:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:58:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:58:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:58:14 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-29 18:58:14 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-29 18:58:14 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-29 18:58:14 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-29 18:58:14 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-29 18:58:14 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-29 18:58:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-29 18:58:14 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-29 18:58:14 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-29 18:58:14 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-29 18:58:14 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-29 18:58:14 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-29 18:58:14 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-29 18:58:14 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-29 18:58:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 18:58:14 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-29 18:58:14 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 2 dB 2009-Apr-29 18:58:14 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-29 18:58:14 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-29 18:58:14 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-29 18:58:14 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-29 18:58:14 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-29 18:58:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.053 0.919 ALFA beam 1: 1.080 1.075 2009-Apr-29 18:58:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.998 0.976 ALFA beam 3: 1.091 1.111 2009-Apr-29 18:58:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.120 0.955 ALFA beam 5: 1.106 1.073 2009-Apr-29 18:58:14 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.991 0.106 ALFA beam 7: 1.085 0.132 2009-Apr-29 18:58:14 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-29 18:58:14 LOG5 finish_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-29 18:58:14 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-29 18:58:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-29 18:58:14 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-29 18:58:14 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-29 18:58:14 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-29 18:58:14 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-29 18:58:14 LOG5 finish_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-29 18:58:14 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-29 18:58:14 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-29 18:58:14 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-29 18:58:14 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-29 18:58:14 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:02:33.1 LST = 09:03:19.8 diff = -46.8 secs 2009-Apr-29 18:58:14 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2009-Apr-29 18:58:14 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:58:14 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:58:15 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:58:15 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-29 18:58:15 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Apr-29 18:58:15 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-29 18:58:15 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-29 18:58:15 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-29 18:58:15 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-29 18:58:15 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-29 18:58:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-29 18:58:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-29 18:58:15 INFO2 take_data: Starting WAPP 600-second scan: 911900050 2009-Apr-29 18:58:15 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-29 18:58:15 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-29 18:58:15 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-29 18:58:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 18:58:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-29 18:58:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 82696.00 2009-Apr-29 18:58:15 NOTE WAPPDATA-new_file: New FITS file: wapp.20090429.a2010.0001.fits 2009-Apr-29 18:58:15 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090429.a2010.0001.fits} 2009-Apr-29 18:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 18:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 18:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 18:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 18:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 18:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 18:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 18:58:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 18:58:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-29 18:58:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.917 1.076 1.075 2009-Apr-29 18:58:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.972 1.089 1.108 2009-Apr-29 18:58:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.954 1.099 1.069 2009-Apr-29 18:58:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.990 0.107 1.085 0.132 2009-Apr-29 18:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 18:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 18:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 18:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 18:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 18:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 18:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 18:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 18:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 18:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 18:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 18:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 18:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 18:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 18:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 18:58:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 18:58:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 18:58:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 18:58:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 18:58:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 18:59:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 18:59:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 18:59:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-29 18:59:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 18:59:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 18:59:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 18:59:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 18:59:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 18:59:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 18:59:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 18:59:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 0.915 1.071 1.070 2009-Apr-29 18:59:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.970 1.088 1.107 2009-Apr-29 18:59:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.956 1.075 1.046 2009-Apr-29 18:59:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.106 1.031 0.132 2009-Apr-29 18:59:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 18:59:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 18:59:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 18:59:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 18:59:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 18:59:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 18:59:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 18:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 18:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 18:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 18:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 18:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 18:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 18:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 18:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 18:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 18:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 18:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 18:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 18:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:00:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:00:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:00:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.145 (still bad) 2009-Apr-29 19:00:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:00:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.051 0.916 1.076 1.074 2009-Apr-29 19:00:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.008 0.976 1.136 1.160 2009-Apr-29 19:00:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.952 1.071 1.041 2009-Apr-29 19:00:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.106 1.027 0.132 2009-Apr-29 19:00:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.176 (still bad) 2009-Apr-29 19:00:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.188 (still bad) 2009-Apr-29 19:00:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.188 (still bad) 2009-Apr-29 19:00:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.182 (still bad) 2009-Apr-29 19:00:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.172 (still bad) 2009-Apr-29 19:00:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.152 (still bad) 2009-Apr-29 19:00:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.137 (still bad) 2009-Apr-29 19:00:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:00:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:00:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-29 19:00:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.140 (still bad) 2009-Apr-29 19:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.143 (still bad) 2009-Apr-29 19:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.146 (still bad) 2009-Apr-29 19:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.147 (still bad) 2009-Apr-29 19:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.142 (still bad) 2009-Apr-29 19:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.138 (still bad) 2009-Apr-29 19:00:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-29 19:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:01:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:01:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.052 0.918 1.073 1.073 2009-Apr-29 19:01:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.972 1.089 1.112 2009-Apr-29 19:01:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.952 1.110 1.078 2009-Apr-29 19:01:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.106 1.034 0.131 2009-Apr-29 19:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:01:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:01:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:01:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:01:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:01:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:01:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:01:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:01:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:01:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:01:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:01:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:01:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:02:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:02:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:02:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:02:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:02:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:02:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:02:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.050 0.916 1.075 1.075 2009-Apr-29 19:02:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.973 1.091 1.111 2009-Apr-29 19:02:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.951 1.074 1.041 2009-Apr-29 19:02:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.106 1.030 0.131 2009-Apr-29 19:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:02:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:03:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:03:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:03:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:03:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:03:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:03:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:03:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:03:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:03:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:03:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:03:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:03:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.047 0.918 1.074 1.073 2009-Apr-29 19:03:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.974 1.089 1.107 2009-Apr-29 19:03:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.953 1.073 1.041 2009-Apr-29 19:03:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.106 1.030 0.131 2009-Apr-29 19:03:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:03:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:03:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:03:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:03:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:03:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:03:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:03:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:03:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:03:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:03:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:03:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:03:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:03:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:03:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:04:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:04:26 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 0.917 1.073 1.069 2009-Apr-29 19:04:26 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.971 1.090 1.109 2009-Apr-29 19:04:26 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.958 1.075 1.042 2009-Apr-29 19:04:26 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.106 1.030 0.131 2009-Apr-29 19:04:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:04:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:04:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:04:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:04:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:04:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:04:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:04:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:04:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:04:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:04:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:04:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:04:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:04:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:04:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:04:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:05:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:05:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:05:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:05:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:05:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:05:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:05:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:05:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:05:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:05:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:05:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:05:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:05:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:05:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:05:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.049 0.923 1.080 1.078 2009-Apr-29 19:05:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.012 0.980 1.093 1.115 2009-Apr-29 19:05:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.955 1.073 1.045 2009-Apr-29 19:05:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.106 1.029 0.131 2009-Apr-29 19:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:05:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:05:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:05:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:05:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:05:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:06:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:06:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:06:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:06:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:06:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:06:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:06:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:06:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:06:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:06:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:06:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:06:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-29 19:06:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-29 19:06:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:06:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 0.921 1.073 1.073 2009-Apr-29 19:06:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.974 1.108 1.127 2009-Apr-29 19:06:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.953 1.074 1.045 2009-Apr-29 19:06:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.106 1.031 0.131 2009-Apr-29 19:06:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:06:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-29 19:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-29 19:06:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-29 19:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Apr-29 19:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.136 (still bad) 2009-Apr-29 19:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-29 19:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-29 19:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:07:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:07:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:07:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:07:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:07:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:07:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:07:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:07:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 0.917 1.074 1.073 2009-Apr-29 19:07:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.973 1.091 1.112 2009-Apr-29 19:07:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.954 1.072 1.044 2009-Apr-29 19:07:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.106 1.029 0.131 2009-Apr-29 19:07:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:07:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:07:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:07:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:07:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:07:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:07:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:07:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:07:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:07:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:07:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:07:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:07:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:07:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:08:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:08:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:08:16 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 19:08:16 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-29 19:08:16 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-29 19:08:16 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-29 19:08:16 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-29 19:08:16 LOG1 fixed_driftmap: New position: year = 2009.3279874261668 RA = 09:12:51.3 RA/Dec = 09:13:24.3 +20:45:59.1 2009-Apr-29 19:08:16 NOTE fixed_driftmap: Correcting ZA to 2:24:45.4 ... 2009-Apr-29 19:08:16 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.4126030914 -CF 2009-Apr-29 19:08:16 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-29 19:08:16 START begin_task: Starting task 'WAPP calibration' 2009-Apr-29 19:08:16 LOG5 begin_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-29 19:08:16 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-29 19:08:16 START begin_task: Starting task 'selecting calibration type' 2009-Apr-29 19:08:16 LOG5 begin_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-29 19:08:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-29 19:08:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-29 19:08:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 19:08:16 START begin_task: Starting task 'waiting on setcal' 2009-Apr-29 19:08:16 LOG5 begin_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-29 19:08:16 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.4126030914 -CF 2009-Apr-29 19:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-29 19:08:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 19:08:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-29 19:08:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 19:08:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 19:08:16 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-29 19:08:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-29 19:08:16 LOG5 end_task: Level: (4) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-29 19:08:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-29 19:08:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-29 19:08:16 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-29 19:08:16 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-29 19:08:16 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-29 19:08:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 19:08:17 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-29 19:08:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-29 19:08:17 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-29 19:08:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-29 19:08:17 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-29 19:08:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-29 19:08:17 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-29 19:08:17 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-29 19:08:17 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-29 19:08:17 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-29 19:08:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-29 19:08:17 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-29 19:08:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-29 19:08:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-29 19:08:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-29 19:08:17 LOG5 end_task: Level: (3) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-29 19:08:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-29 19:08:17 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-29 19:08:17 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-29 19:08:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 19:08:17 LOG5 begin_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-29 19:08:17 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 19:08:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-29 19:08:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 19:08:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 19:08:17 LOG5 end_task: Level: (3) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-29 19:08:17 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-29 19:08:17 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-29 19:08:17 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-29 19:08:17 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-29 19:08:17 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-29 19:08:17 INFO2 take_data: Starting WAPP 1-second scan: 911900051 2009-Apr-29 19:08:17 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-29 19:08:17 LOG5 begin_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-29 19:08:17 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 19:08:17 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-29 19:08:17 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83298.00 2009-Apr-29 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 19:08:19 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 19:08:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 19:08:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-29 19:08:19 LOG5 end_task: Level: (4) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-29 19:08:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-29 19:08:19 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-29 19:08:19 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-29 19:08:19 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-29 19:08:19 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-29 19:08:19 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 19:08:19 LOG5 begin_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-29 19:08:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.594 (still bad) 2009-Apr-29 19:08:20 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 19:08:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-29 19:08:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 19:08:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 19:08:20 LOG5 end_task: Level: (3) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-29 19:08:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-29 19:08:20 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-29 19:08:20 LOG5 finish_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-29 19:08:20 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-29 19:08:20 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-29 19:08:20 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-29 19:08:20 LOG5 end_task: Level: (2) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-29 19:08:20 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Apr-29 19:08:20 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-29 19:08:20 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-29 19:08:20 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-29 19:08:20 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-29 19:08:20 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-29 19:08:20 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-29 19:08:20 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-29 19:08:20 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-29 19:08:20 LOG5 begin_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-29 19:08:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-29 19:08:20 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-29 19:08:20 INFO2 take_data: Starting WAPP 600-second scan: 911900052 2009-Apr-29 19:08:20 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-29 19:08:20 LOG5 begin_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-29 19:08:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-29 19:08:20 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 19:08:20 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-29 19:08:20 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83301.00 2009-Apr-29 19:08:20 NOTE WAPPDATA-new_file: New FITS file: wapp.20090429.a2010.0002.fits 2009-Apr-29 19:08:20 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090429.a2010.0002.fits} 2009-Apr-29 19:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 19:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 19:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 19:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 19:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 19:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 19:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 19:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 19:08:22 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 19:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.138 (still bad) 2009-Apr-29 19:08:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.137 (still bad) 2009-Apr-29 19:08:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.139 (still bad) 2009-Apr-29 19:08:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.140 (still bad) 2009-Apr-29 19:08:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:08:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.043 0.919 1.072 1.071 2009-Apr-29 19:08:31 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.974 1.089 1.109 2009-Apr-29 19:08:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.132 0.962 1.073 1.041 2009-Apr-29 19:08:31 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.106 1.029 0.131 2009-Apr-29 19:08:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:08:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-29 19:08:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:08:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:08:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-29 19:08:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:08:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-29 19:08:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-29 19:08:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:08:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:08:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-29 19:08:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:08:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:08:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:09:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:09:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:09:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:09:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:09:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:09:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:09:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:09:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:09:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:09:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:09:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:09:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:09:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:09:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:09:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:09:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.044 0.918 1.071 1.069 2009-Apr-29 19:09:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.975 1.090 1.109 2009-Apr-29 19:09:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.953 1.073 1.043 2009-Apr-29 19:09:33 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.106 1.027 0.131 2009-Apr-29 19:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:09:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:09:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:09:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:09:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:09:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:09:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-29 19:10:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-29 19:10:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-29 19:10:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:10:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:10:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:10:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:10:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:10:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:10:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:10:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-29 19:10:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-29 19:10:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:10:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:10:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:10:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:10:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.139 (still bad) 2009-Apr-29 19:10:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.147 (still bad) 2009-Apr-29 19:10:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:10:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.044 0.919 1.069 1.071 2009-Apr-29 19:10:34 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.976 1.095 1.116 2009-Apr-29 19:10:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.163 0.986 1.074 1.043 2009-Apr-29 19:10:34 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.106 1.027 0.131 2009-Apr-29 19:10:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.176 (still bad) 2009-Apr-29 19:10:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.180 (still bad) 2009-Apr-29 19:10:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.179 (still bad) 2009-Apr-29 19:10:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.176 (still bad) 2009-Apr-29 19:10:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.160 (still bad) 2009-Apr-29 19:10:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.145 (still bad) 2009-Apr-29 19:10:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-29 19:10:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:10:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-29 19:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-29 19:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-29 19:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-29 19:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-29 19:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-29 19:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:11:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:11:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:11:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:11:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:11:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:11:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:11:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:11:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:11:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:11:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:11:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:11:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.040 0.919 1.076 1.076 2009-Apr-29 19:11:35 LOG4 check_wapp_levels: WAPP-2 power levels: 1.008 0.978 1.091 1.110 2009-Apr-29 19:11:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.954 1.075 1.040 2009-Apr-29 19:11:35 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.106 1.029 0.131 2009-Apr-29 19:11:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:11:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:11:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:11:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:11:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:11:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:11:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:11:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:11:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:11:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:11:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:11:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:12:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:12:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:12:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:12:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:12:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:12:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:12:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:12:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.039 0.917 1.080 1.076 2009-Apr-29 19:12:38 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.975 1.089 1.110 2009-Apr-29 19:12:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.951 1.073 1.035 2009-Apr-29 19:12:38 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.106 1.029 0.131 2009-Apr-29 19:12:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:12:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:12:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:12:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:12:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:12:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:12:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:12:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:12:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:12:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:13:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:13:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:13:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:13:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:13:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:13:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:13:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:13:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:13:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:13:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:13:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:13:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:13:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:13:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:13:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:13:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:13:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:13:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:13:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:13:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:13:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:13:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.034 0.917 1.074 1.070 2009-Apr-29 19:13:40 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.978 1.090 1.110 2009-Apr-29 19:13:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.954 1.075 1.034 2009-Apr-29 19:13:40 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.106 1.028 0.131 2009-Apr-29 19:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:13:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:14:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:14:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:14:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:14:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:14:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:14:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:14:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:14:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:14:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:14:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:14:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:14:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:14:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:14:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:14:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:14:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:14:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:14:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.033 0.918 1.074 1.071 2009-Apr-29 19:14:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.008 0.976 1.093 1.111 2009-Apr-29 19:14:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.953 1.072 1.034 2009-Apr-29 19:14:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.106 1.031 0.131 2009-Apr-29 19:14:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:14:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:14:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:14:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:14:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:14:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:14:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:14:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:14:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:15:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:15:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:15:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:15:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:15:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:15:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:15:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:15:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.031 0.921 1.072 1.069 2009-Apr-29 19:15:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.009 0.975 1.091 1.108 2009-Apr-29 19:15:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.951 1.071 1.034 2009-Apr-29 19:15:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.106 1.031 0.130 2009-Apr-29 19:15:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:15:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:15:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:15:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:15:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:15:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:15:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:15:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:16:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:16:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:16:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:16:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:16:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:16:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:16:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:16:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:16:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:16:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:16:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:16:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:16:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:16:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:16:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:16:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:16:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 19:16:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:16:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:16:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:16:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:16:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:16:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:16:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.028 0.914 1.065 1.064 2009-Apr-29 19:16:44 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.972 1.087 1.103 2009-Apr-29 19:16:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 0.946 1.063 1.030 2009-Apr-29 19:16:44 LOG4 check_wapp_levels: WAPP-4 power levels: 0.934 0.106 1.026 0.131 2009-Apr-29 19:16:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:16:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:16:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 19:16:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:16:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:16:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:16:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:17:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:17:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:17:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:17:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:17:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 19:17:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:17:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:17:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-29 19:17:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:17:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:17:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-29 19:17:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-29 19:17:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 19:17:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-29 19:17:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:17:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:17:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 19:17:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:17:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 19:17:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 19:17:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:17:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 19:17:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:17:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 0.911 1.063 1.060 2009-Apr-29 19:17:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.967 1.086 1.107 2009-Apr-29 19:17:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.115 0.945 1.063 1.030 2009-Apr-29 19:17:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.106 1.028 0.131 2009-Apr-29 19:17:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:17:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 19:17:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:17:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:17:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:17:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:17:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 19:18:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 19:18:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:18:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:18:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:18:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:18:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:18:21 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 19:18:21 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-29 19:18:21 LOG5 end_task: Level: (3) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-29 19:18:21 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-29 19:18:21 LOG5 end_task: Level: (2) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-29 19:18:21 LOG1 fixed_driftmap: New position: year = 2009.3280065974598 RA = 09:22:58.1 RA/Dec = 09:23:30.9 +20:45:53.4 2009-Apr-29 19:18:21 NOTE fixed_driftmap: Correcting ZA to 2:24:39.7 ... 2009-Apr-29 19:18:21 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.4110146486 -CF 2009-Apr-29 19:18:21 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-29 19:18:21 START begin_task: Starting task 'WAPP calibration' 2009-Apr-29 19:18:21 LOG5 begin_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-29 19:18:21 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-29 19:18:21 START begin_task: Starting task 'selecting calibration type' 2009-Apr-29 19:18:21 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-29 19:18:21 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-29 19:18:21 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-29 19:18:21 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 19:18:21 START begin_task: Starting task 'waiting on setcal' 2009-Apr-29 19:18:21 LOG5 begin_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-29 19:18:21 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.4110146486 -CF 2009-Apr-29 19:18:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 19:18:21 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-29 19:18:21 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 19:18:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:18:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 19:18:22 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-29 19:18:22 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-29 19:18:22 LOG5 end_task: Level: (4) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-29 19:18:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-29 19:18:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-29 19:18:22 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-29 19:18:22 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-29 19:18:22 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-29 19:18:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 19:18:22 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-29 19:18:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-29 19:18:22 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-29 19:18:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-29 19:18:22 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-29 19:18:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-29 19:18:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-29 19:18:22 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-29 19:18:22 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-29 19:18:22 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-29 19:18:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-29 19:18:22 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-29 19:18:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-29 19:18:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-29 19:18:22 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-29 19:18:22 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-29 19:18:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-29 19:18:22 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-29 19:18:22 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-29 19:18:22 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 19:18:22 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-29 19:18:22 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 19:18:22 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-29 19:18:22 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 19:18:22 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 19:18:22 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-29 19:18:22 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-29 19:18:22 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-29 19:18:22 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-29 19:18:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-29 19:18:22 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-29 19:18:22 INFO2 take_data: Starting WAPP 1-second scan: 911900053 2009-Apr-29 19:18:23 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-29 19:18:23 LOG5 begin_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-29 19:18:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 19:18:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-29 19:18:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83904.00 2009-Apr-29 19:18:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 19:18:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 19:18:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 19:18:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 19:18:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 19:18:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 19:18:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 19:18:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 19:18:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 19:18:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:18:25 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 19:18:25 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-29 19:18:25 LOG5 end_task: Level: (4) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-29 19:18:25 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-29 19:18:25 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-29 19:18:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-29 19:18:25 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-29 19:18:25 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-29 19:18:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 19:18:25 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-29 19:18:25 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 19:18:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-29 19:18:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 19:18:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 19:18:25 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-29 19:18:25 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-29 19:18:25 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-29 19:18:25 LOG5 finish_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-29 19:18:25 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-29 19:18:25 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-29 19:18:25 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-29 19:18:25 LOG5 end_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-29 19:18:25 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2009-Apr-29 19:18:26 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2009-Apr-29 19:18:26 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-29 19:18:26 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-29 19:18:26 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-29 19:18:26 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-29 19:18:26 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-29 19:18:26 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-29 19:18:26 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-29 19:18:26 LOG5 begin_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-29 19:18:26 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-29 19:18:26 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-29 19:18:26 INFO2 take_data: Starting WAPP 600-second scan: 911900054 2009-Apr-29 19:18:26 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-29 19:18:26 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-29 19:18:26 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-29 19:18:26 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 19:18:26 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-29 19:18:26 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83907.00 2009-Apr-29 19:18:26 NOTE WAPPDATA-new_file: New FITS file: wapp.20090429.a2010.0003.fits 2009-Apr-29 19:18:26 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090429.a2010.0003.fits} 2009-Apr-29 19:18:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.575 (still bad) 2009-Apr-29 19:18:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 19:18:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 19:18:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 19:18:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 19:18:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 19:18:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 19:18:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 19:18:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 19:18:28 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 19:18:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:18:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:18:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:18:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 0.912 1.077 1.073 2009-Apr-29 19:18:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.972 1.085 1.104 2009-Apr-29 19:18:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.114 0.946 1.063 1.029 2009-Apr-29 19:18:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.932 0.106 1.025 0.130 2009-Apr-29 19:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-29 19:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 19:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:19:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-29 19:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-29 19:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:19:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-29 19:19:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-29 19:19:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-29 19:19:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.112 (still bad) 2009-Apr-29 19:19:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:19:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-29 19:19:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-29 19:19:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:19:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:19:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 19:19:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:19:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 19:19:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 19:19:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:19:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-29 19:19:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-29 19:19:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:19:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:19:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:19:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:19:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 0.916 1.068 1.063 2009-Apr-29 19:19:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.973 1.090 1.107 2009-Apr-29 19:19:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.118 0.949 1.064 1.028 2009-Apr-29 19:19:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.106 1.027 0.130 2009-Apr-29 19:19:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:19:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:19:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:19:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:19:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:20:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:20:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-29 19:20:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:20:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:20:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:20:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:20:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:20:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:20:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 0.915 1.065 1.061 2009-Apr-29 19:20:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.970 1.085 1.102 2009-Apr-29 19:20:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.949 1.062 1.028 2009-Apr-29 19:20:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.933 0.106 1.024 0.131 2009-Apr-29 19:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:20:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:21:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:21:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:21:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:21:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 0.915 1.070 1.067 2009-Apr-29 19:21:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.970 1.087 1.103 2009-Apr-29 19:21:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 0.951 1.066 1.029 2009-Apr-29 19:21:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.106 1.027 0.131 2009-Apr-29 19:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-29 19:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:22:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:22:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:22:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:22:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:22:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:22:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:22:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.020 0.914 1.069 1.067 2009-Apr-29 19:22:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.008 0.973 1.087 1.104 2009-Apr-29 19:22:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.118 0.949 1.063 1.028 2009-Apr-29 19:22:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.106 1.026 0.131 2009-Apr-29 19:22:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:22:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:22:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:23:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:23:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:23:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:23:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:23:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:23:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:23:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:23:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:23:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:23:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:23:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 0.918 1.071 1.066 2009-Apr-29 19:23:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.973 1.089 1.103 2009-Apr-29 19:23:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.950 1.061 1.028 2009-Apr-29 19:23:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.106 1.029 0.131 2009-Apr-29 19:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:24:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:24:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:24:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:24:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:24:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:24:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:24:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:24:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:24:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:24:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:24:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:24:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:24:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:24:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:24:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:24:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:24:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:24:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:24:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.027 0.917 1.071 1.067 2009-Apr-29 19:24:55 LOG4 check_wapp_levels: WAPP-2 power levels: 1.010 0.975 1.088 1.103 2009-Apr-29 19:24:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.121 0.952 1.066 1.026 2009-Apr-29 19:24:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.106 1.027 0.131 2009-Apr-29 19:24:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:24:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:25:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:25:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:25:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:25:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:25:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:25:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:25:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:25:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:25:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:25:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:25:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:25:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:25:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:25:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:25:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:25:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.034 0.924 1.069 1.066 2009-Apr-29 19:25:56 LOG4 check_wapp_levels: WAPP-2 power levels: 1.008 0.974 1.095 1.108 2009-Apr-29 19:25:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.950 1.066 1.028 2009-Apr-29 19:25:56 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.106 1.027 0.131 2009-Apr-29 19:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-29 19:26:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:26:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:26:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:26:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:26:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:26:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:26:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:26:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:26:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:26:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:26:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:26:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:26:57 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:26:57 LOG4 check_wapp_levels: WAPP-1 power levels: 1.024 0.919 1.069 1.063 2009-Apr-29 19:26:57 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.972 1.089 1.104 2009-Apr-29 19:26:57 LOG4 check_wapp_levels: WAPP-3 power levels: 1.120 0.952 1.070 1.030 2009-Apr-29 19:26:57 LOG4 check_wapp_levels: WAPP-4 power levels: 0.936 0.106 1.026 0.131 2009-Apr-29 19:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:27:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:27:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:27:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:27:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:27:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:27:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:27:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:27:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.021 0.918 1.068 1.062 2009-Apr-29 19:27:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.008 0.971 1.093 1.111 2009-Apr-29 19:27:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.953 1.068 1.030 2009-Apr-29 19:27:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.935 0.106 1.025 0.131 2009-Apr-29 19:28:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:28:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:28:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:28:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:28:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 19:28:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-29 19:28:27 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-29 19:28:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-29 19:28:27 LOG5 end_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-29 19:28:27 LOG1 fixed_driftmap: New position: year = 2009.3280258004411 RA = 09:33:05.8 RA/Dec = 09:33:38.6 +20:45:47.9 2009-Apr-29 19:28:27 NOTE fixed_driftmap: Correcting ZA to 2:24:34.2 ... 2009-Apr-29 19:28:27 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.4094988182 -CF 2009-Apr-29 19:28:27 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-29 19:28:27 START begin_task: Starting task 'WAPP calibration' 2009-Apr-29 19:28:27 LOG5 begin_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-29 19:28:27 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-29 19:28:27 START begin_task: Starting task 'selecting calibration type' 2009-Apr-29 19:28:27 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-29 19:28:27 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-29 19:28:27 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-29 19:28:27 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 19:28:27 START begin_task: Starting task 'waiting on setcal' 2009-Apr-29 19:28:27 LOG5 begin_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-29 19:28:27 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.4094988182 -CF 2009-Apr-29 19:28:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 19:28:27 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-29 19:28:27 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 19:28:27 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 19:28:27 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-29 19:28:27 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-29 19:28:27 LOG5 end_task: Level: (4) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-29 19:28:27 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-29 19:28:27 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-29 19:28:27 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-29 19:28:27 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-29 19:28:27 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-29 19:28:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 19:28:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-29 19:28:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-29 19:28:28 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-29 19:28:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-29 19:28:28 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-29 19:28:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-29 19:28:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-29 19:28:28 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-29 19:28:28 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-29 19:28:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-29 19:28:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-29 19:28:28 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-29 19:28:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-29 19:28:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-29 19:28:28 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-29 19:28:28 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-29 19:28:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-29 19:28:28 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-29 19:28:28 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-29 19:28:28 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 19:28:28 LOG5 begin_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-29 19:28:28 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 19:28:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-29 19:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:28:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 19:28:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 19:28:28 LOG5 end_task: Level: (3) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-29 19:28:28 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-29 19:28:28 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-29 19:28:28 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-29 19:28:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-29 19:28:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-29 19:28:28 INFO2 take_data: Starting WAPP 1-second scan: 911900055 2009-Apr-29 19:28:28 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-29 19:28:28 LOG5 begin_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-29 19:28:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 19:28:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-29 19:28:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84509.00 2009-Apr-29 19:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 19:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 19:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 19:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 19:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 19:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 19:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 19:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 19:28:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 19:28:30 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 19:28:30 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-29 19:28:30 LOG5 end_task: Level: (4) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-29 19:28:30 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-29 19:28:30 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-29 19:28:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-29 19:28:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-29 19:28:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-29 19:28:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 19:28:30 LOG5 begin_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-29 19:28:30 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 19:28:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-29 19:28:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 19:28:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 19:28:30 LOG5 end_task: Level: (3) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-29 19:28:30 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-29 19:28:30 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-29 19:28:30 LOG5 finish_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-29 19:28:30 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-29 19:28:30 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-29 19:28:30 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-29 19:28:30 LOG5 end_task: Level: (2) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-29 19:28:30 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2009-Apr-29 19:28:30 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2009-Apr-29 19:28:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-29 19:28:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-29 19:28:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-29 19:28:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-29 19:28:31 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-29 19:28:31 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-29 19:28:31 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-29 19:28:31 LOG5 begin_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-29 19:28:31 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-29 19:28:31 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-29 19:28:31 INFO2 take_data: Starting WAPP 600-second scan: 911900056 2009-Apr-29 19:28:31 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-29 19:28:31 LOG5 begin_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-29 19:28:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-29 19:28:31 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 19:28:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.591 (still bad) 2009-Apr-29 19:28:31 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-29 19:28:31 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84512.00 2009-Apr-29 19:28:31 NOTE WAPPDATA-new_file: New FITS file: wapp.20090429.a2010.0004.fits 2009-Apr-29 19:28:31 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090429.a2010.0004.fits} 2009-Apr-29 19:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 19:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 19:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 19:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 19:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 19:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 19:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 19:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 19:28:33 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 19:28:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.591 (still bad) 2009-Apr-29 19:28:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:28:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:28:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:28:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:28:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:28:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:28:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:28:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:28:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:28:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:28:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:28:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:28:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:29:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:29:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 0.920 1.071 1.066 2009-Apr-29 19:29:01 LOG4 check_wapp_levels: WAPP-2 power levels: 1.007 0.975 1.091 1.109 2009-Apr-29 19:29:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.955 1.070 1.029 2009-Apr-29 19:29:01 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.106 1.028 0.131 2009-Apr-29 19:29:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:29:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:29:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:29:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:29:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:29:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:29:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:29:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:29:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:29:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:29:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:29:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:29:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:29:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:29:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:29:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:30:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:30:02 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 0.921 1.072 1.068 2009-Apr-29 19:30:02 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 0.975 1.094 1.107 2009-Apr-29 19:30:02 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.956 1.071 1.030 2009-Apr-29 19:30:02 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.106 1.029 0.131 2009-Apr-29 19:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:30:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:31:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:31:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 0.919 1.072 1.066 2009-Apr-29 19:31:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.007 0.973 1.091 1.105 2009-Apr-29 19:31:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.955 1.073 1.032 2009-Apr-29 19:31:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.106 1.028 0.131 2009-Apr-29 19:31:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:31:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:31:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:31:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:31:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:31:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:31:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:32:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:32:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 0.925 1.075 1.069 2009-Apr-29 19:32:07 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.977 1.095 1.108 2009-Apr-29 19:32:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.126 0.959 1.075 1.034 2009-Apr-29 19:32:07 LOG4 check_wapp_levels: WAPP-4 power levels: 0.943 0.106 1.035 0.131 2009-Apr-29 19:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:32:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:32:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:32:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:32:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:32:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:32:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:32:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:32:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:33:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:33:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 0.919 1.072 1.067 2009-Apr-29 19:33:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 0.975 1.092 1.107 2009-Apr-29 19:33:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.957 1.070 1.030 2009-Apr-29 19:33:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.106 1.032 0.131 2009-Apr-29 19:33:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:33:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:33:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:33:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:33:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:34:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:34:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:34:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:34:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:34:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:34:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.023 0.919 1.077 1.069 2009-Apr-29 19:34:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.012 0.976 1.095 1.107 2009-Apr-29 19:34:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.125 0.955 1.068 1.031 2009-Apr-29 19:34:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.106 1.030 0.131 2009-Apr-29 19:34:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:34:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:34:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:34:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:34:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-29 19:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-29 19:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-29 19:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-29 19:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-29 19:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-29 19:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-29 19:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-29 19:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-29 19:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:35:11 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:35:11 LOG4 check_wapp_levels: WAPP-1 power levels: 1.020 0.920 1.070 1.065 2009-Apr-29 19:35:11 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 0.976 1.093 1.107 2009-Apr-29 19:35:11 LOG4 check_wapp_levels: WAPP-3 power levels: 1.125 0.956 1.071 1.030 2009-Apr-29 19:35:11 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.106 1.029 0.131 2009-Apr-29 19:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:35:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:35:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:35:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-29 19:35:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:35:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:35:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:35:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:35:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:35:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-29 19:35:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:35:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:35:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:35:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:35:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:35:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-29 19:35:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-29 19:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-29 19:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-29 19:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-29 19:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-29 19:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-29 19:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-29 19:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-29 19:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-29 19:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-29 19:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-29 19:36:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:36:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.019 0.920 1.075 1.071 2009-Apr-29 19:36:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.013 0.979 1.097 1.110 2009-Apr-29 19:36:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.135 0.968 1.078 1.035 2009-Apr-29 19:36:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.942 0.106 1.033 0.131 2009-Apr-29 19:36:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.134 (still bad) 2009-Apr-29 19:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-29 19:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-29 19:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-29 19:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-29 19:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:37:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:37:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:37:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.015 0.919 1.070 1.070 2009-Apr-29 19:37:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.010 0.978 1.095 1.110 2009-Apr-29 19:37:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.958 1.070 1.032 2009-Apr-29 19:37:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.940 0.106 1.030 0.131 2009-Apr-29 19:37:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-29 19:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-29 19:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-29 19:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-29 19:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-29 19:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-29 19:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Apr-29 19:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.138 (still bad) 2009-Apr-29 19:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.144 (still bad) 2009-Apr-29 19:38:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.152 (still bad) 2009-Apr-29 19:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.148 (still bad) 2009-Apr-29 19:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.148 (still bad) 2009-Apr-29 19:38:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:38:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.022 0.921 1.071 1.070 2009-Apr-29 19:38:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.014 0.979 1.095 1.113 2009-Apr-29 19:38:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.144 0.974 1.073 1.032 2009-Apr-29 19:38:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.106 1.031 0.131 2009-Apr-29 19:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.137 (still bad) 2009-Apr-29 19:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-29 19:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-29 19:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.130 (still bad) 2009-Apr-29 19:38:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 19:38:32 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-29 19:38:32 LOG5 end_task: Level: (3) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-29 19:38:32 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-29 19:38:32 LOG5 end_task: Level: (2) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-29 19:38:32 LOG1 fixed_driftmap: New position: year = 2009.3280449717342 RA = 09:43:12.6 RA/Dec = 09:43:45.3 +20:45:42.7 2009-Apr-29 19:38:32 NOTE fixed_driftmap: Correcting ZA to 2:24:29.0 ... 2009-Apr-29 19:38:32 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.4080635441 -CF 2009-Apr-29 19:38:32 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-29 19:38:32 START begin_task: Starting task 'WAPP calibration' 2009-Apr-29 19:38:32 LOG5 begin_task: Level: (2) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-29 19:38:32 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-29 19:38:32 START begin_task: Starting task 'selecting calibration type' 2009-Apr-29 19:38:32 LOG5 begin_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-29 19:38:32 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-29 19:38:32 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-29 19:38:32 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 19:38:32 START begin_task: Starting task 'waiting on setcal' 2009-Apr-29 19:38:32 LOG5 begin_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-29 19:38:32 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.4080635441 -CF 2009-Apr-29 19:38:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 19:38:32 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-29 19:38:32 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 19:38:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 19:38:32 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-29 19:38:32 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-29 19:38:32 LOG5 end_task: Level: (4) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-29 19:38:32 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-29 19:38:32 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-29 19:38:32 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-29 19:38:32 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-29 19:38:32 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-29 19:38:32 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 19:38:33 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-29 19:38:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-29 19:38:33 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-29 19:38:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-29 19:38:33 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-29 19:38:33 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-29 19:38:33 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-29 19:38:33 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-29 19:38:33 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-29 19:38:33 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-29 19:38:33 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-29 19:38:33 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-29 19:38:33 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-29 19:38:33 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-29 19:38:33 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-29 19:38:33 LOG5 end_task: Level: (3) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-29 19:38:33 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-29 19:38:33 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-29 19:38:33 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-29 19:38:33 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 19:38:33 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-29 19:38:33 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 19:38:33 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-29 19:38:33 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 19:38:33 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 19:38:33 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-29 19:38:33 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-29 19:38:33 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-29 19:38:33 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-29 19:38:33 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-29 19:38:33 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-29 19:38:33 INFO2 take_data: Starting WAPP 1-second scan: 911900057 2009-Apr-29 19:38:33 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-29 19:38:33 LOG5 begin_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-29 19:38:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 19:38:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-29 19:38:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85114.00 2009-Apr-29 19:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 19:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 19:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 19:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 19:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 19:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 19:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 19:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 19:38:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 19:38:35 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 19:38:35 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-29 19:38:35 LOG5 end_task: Level: (4) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-29 19:38:35 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-29 19:38:35 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-29 19:38:35 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-29 19:38:35 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-29 19:38:35 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-29 19:38:35 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 19:38:35 LOG5 begin_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-29 19:38:36 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 19:38:36 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-29 19:38:36 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 19:38:36 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 19:38:36 LOG5 end_task: Level: (3) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-29 19:38:36 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-29 19:38:36 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-29 19:38:36 LOG5 finish_task: Level: (2) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-29 19:38:36 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-29 19:38:36 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-29 19:38:36 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-29 19:38:36 LOG5 end_task: Level: (2) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-29 19:38:36 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2009-Apr-29 19:38:36 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2009-Apr-29 19:38:36 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Becky Koopmann 2009-Apr-29 19:38:36 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Becky Koopmann 2009-Apr-29 19:38:36 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Becky Koopmann 2009-Apr-29 19:38:36 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Becky Koopmann 2009-Apr-29 19:38:36 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-29 19:38:36 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-29 19:38:36 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-29 19:38:36 LOG5 begin_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-29 19:38:36 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-29 19:38:36 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-29 19:38:36 INFO2 take_data: Starting WAPP 600-second scan: 911900058 2009-Apr-29 19:38:36 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-29 19:38:36 LOG5 begin_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-29 19:38:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Becky Koopmann' 2009-Apr-29 19:38:36 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-29 19:38:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.586 (still bad) 2009-Apr-29 19:38:36 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-29 19:38:36 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85117.00 2009-Apr-29 19:38:36 NOTE WAPPDATA-new_file: New FITS file: wapp.20090429.a2010.0005.fits 2009-Apr-29 19:38:36 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090429.a2010.0005.fits} 2009-Apr-29 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-29 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 997.770631 MHz 2009-Apr-29 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 944.606921 MHz 2009-Apr-29 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 942.649982 MHz 2009-Apr-29 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 19.950000 MHz 2009-Apr-29 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1905.000000 MHz 2009-Apr-29 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1613.000000 MHz 2009-Apr-29 19:38:38 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1955.000000 MHz 2009-Apr-29 19:38:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.586 (still bad) 2009-Apr-29 19:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-29 19:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-29 19:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-29 19:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:39:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-29 19:39:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.019 0.921 1.072 1.072 2009-Apr-29 19:39:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 0.974 1.094 1.110 2009-Apr-29 19:39:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.124 0.957 1.073 1.030 2009-Apr-29 19:39:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.106 1.029 0.131 2009-Apr-29 19:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-29 19:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-29 19:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-29 19:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.124 (still bad) 2009-Apr-29 19:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-29 19:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-29 19:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-29 19:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:40:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:40:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:40:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:40:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:40:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-29 19:40:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.019 0.923 1.074 1.071 2009-Apr-29 19:40:19 LOG4 check_wapp_levels: WAPP-2 power levels: 1.017 0.980 1.102 1.116 2009-Apr-29 19:40:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.125 0.957 1.074 1.032 2009-Apr-29 19:40:19 LOG4 check_wapp_levels: WAPP-4 power levels: 0.946 0.107 1.039 0.131 2009-Apr-29 19:40:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:40:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:40:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:40:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:40:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:40:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.127 (still bad) 2009-Apr-29 19:40:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:40:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:40:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.123 (still bad) 2009-Apr-29 19:40:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:40:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:40:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-29 19:40:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:41:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-29 19:41:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 0.919 1.072 1.070 2009-Apr-29 19:41:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.014 0.976 1.097 1.107 2009-Apr-29 19:41:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.953 1.070 1.029 2009-Apr-29 19:41:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.107 1.032 0.131 2009-Apr-29 19:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.122 (still bad) 2009-Apr-29 19:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.121 (still bad) 2009-Apr-29 19:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.119 (still bad) 2009-Apr-29 19:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:41:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:41:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:41:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:41:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:41:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:41:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:41:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:41:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:41:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:41:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:41:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:42:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-29 19:42:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:42:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:42:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:42:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:42:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:42:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:42:21 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-29 19:42:21 LOG4 check_wapp_levels: WAPP-1 power levels: 1.013 0.920 1.070 1.072 2009-Apr-29 19:42:21 LOG4 check_wapp_levels: WAPP-2 power levels: 1.017 0.977 1.099 1.112 2009-Apr-29 19:42:21 LOG4 check_wapp_levels: WAPP-3 power levels: 1.123 0.955 1.070 1.032 2009-Apr-29 19:42:21 LOG4 check_wapp_levels: WAPP-4 power levels: 0.941 0.107 1.034 0.131 2009-Apr-29 19:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:43:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:43:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:43:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:43:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-29 19:43:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:43:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:43:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:43:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.120 (still bad) 2009-Apr-29 19:43:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:43:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:43:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:43:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-29 19:43:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 0.918 1.064 1.066 2009-Apr-29 19:43:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.974 1.099 1.111 2009-Apr-29 19:43:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.119 0.955 1.073 1.033 2009-Apr-29 19:43:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.107 1.031 0.131 2009-Apr-29 19:43:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:43:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:43:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:43:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:43:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:43:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:43:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:43:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-29 19:43:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-29 19:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-29 19:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-29 19:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-29 19:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:44:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-29 19:44:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.013 0.921 1.087 1.089 2009-Apr-29 19:44:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.015 0.971 1.095 1.105 2009-Apr-29 19:44:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.117 0.952 1.069 1.029 2009-Apr-29 19:44:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.107 1.030 0.131 2009-Apr-29 19:44:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:44:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:44:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:44:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-29 19:44:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:44:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:44:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:44:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:44:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:44:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:44:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:44:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:44:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:44:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:44:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:44:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:44:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Apr-29 19:45:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Apr-29 19:45:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:45:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Apr-29 19:45:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Apr-29 19:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:45:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-29 19:45:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 0.916 1.063 1.064 2009-Apr-29 19:45:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.014 0.972 1.095 1.106 2009-Apr-29 19:45:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 0.953 1.070 1.026 2009-Apr-29 19:45:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.107 1.030 0.131 2009-Apr-29 19:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Apr-29 19:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.114 (still bad) 2009-Apr-29 19:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Apr-29 19:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:46:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:46:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:46:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:46:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:46:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:46:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:46:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:46:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:46:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:46:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:46:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.118 (still bad) 2009-Apr-29 19:46:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:46:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:46:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-29 19:46:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 0.917 1.067 1.067 2009-Apr-29 19:46:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.016 0.972 1.100 1.111 2009-Apr-29 19:46:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.118 0.955 1.067 1.030 2009-Apr-29 19:46:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.937 0.107 1.030 0.131 2009-Apr-29 19:46:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.115 (still bad) 2009-Apr-29 19:46:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:46:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.116 (still bad) 2009-Apr-29 19:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.119 (still bad) 2009-Apr-29 19:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.117 (still bad) 2009-Apr-29 19:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-29 19:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-29 19:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-29 19:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.135 (still bad) 2009-Apr-29 19:47:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.138 (still bad) 2009-Apr-29 19:47:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.136 (still bad) 2009-Apr-29 19:47:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.136 (still bad) 2009-Apr-29 19:47:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.138 (still bad) 2009-Apr-29 19:47:12 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-29 19:47:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-29 19:47:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-29 19:47:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-29 19:47:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.128 (still bad) 2009-Apr-29 19:47:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.134 (still bad) 2009-Apr-29 19:47:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.131 (still bad) 2009-Apr-29 19:47:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-29 19:47:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-29 19:47:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 0.918 1.067 1.067 2009-Apr-29 19:47:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.976 1.098 1.108 2009-Apr-29 19:47:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.135 0.972 1.067 1.034 2009-Apr-29 19:47:28 LOG4 check_wapp_levels: WAPP-4 power levels: 0.938 0.107 1.029 0.131 2009-Apr-29 19:47:30 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.137 (still bad) 2009-Apr-29 19:47:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.138 (still bad) 2009-Apr-29 19:47:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.139 (still bad) 2009-Apr-29 19:47:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.132 (still bad) 2009-Apr-29 19:47:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.129 (still bad) 2009-Apr-29 19:47:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-29 19:47:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:47:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-29 19:47:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:47:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:47:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:47:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-29 19:47:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-29 19:47:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.126 (still bad) 2009-Apr-29 19:47:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-29 19:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.125 (still bad) 2009-Apr-29 19:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-29 19:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-29 19:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-29 19:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:48:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:48:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-29 19:48:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:48:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-29 19:48:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.124 (still bad) 2009-Apr-29 19:48:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-29 19:48:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.123 (still bad) 2009-Apr-29 19:48:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-29 19:48:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 0.922 1.067 1.067 2009-Apr-29 19:48:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.018 0.976 1.098 1.110 2009-Apr-29 19:48:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.122 0.958 1.071 1.034 2009-Apr-29 19:48:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.939 0.107 1.030 0.132 2009-Apr-29 19:48:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:48:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.122 (still bad) 2009-Apr-29 19:48:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.120 (still bad) 2009-Apr-29 19:48:37 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.121 (still bad) 2009-Apr-29 19:48:37 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-29 19:48:37 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-29 19:48:37 LOG5 end_task: Level: (3) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-29 19:48:37 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-29 19:48:37 LOG5 end_task: Level: (2) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-29 19:48:37 LOG1 fixed_driftmap: New position: year = 2009.3280641430274 RA = 09:53:19.4 RA/Dec = 09:53:51.9 +20:45:37.9 2009-Apr-29 19:48:37 NOTE fixed_driftmap: Correcting ZA to 2:24:24.2 ... 2009-Apr-29 19:48:37 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.4067090709 -CF 2009-Apr-29 19:48:37 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-29 19:48:37 START begin_task: Starting task 'WAPP calibration' 2009-Apr-29 19:48:37 LOG5 begin_task: Level: (2) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-29 19:48:37 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-29 19:48:37 START begin_task: Starting task 'selecting calibration type' 2009-Apr-29 19:48:37 LOG5 begin_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-29 19:48:37 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-29 19:48:37 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-29 19:48:37 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 19:48:37 START begin_task: Starting task 'waiting on setcal' 2009-Apr-29 19:48:37 LOG5 begin_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-29 19:48:37 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.4067090709 -CF 2009-Apr-29 19:48:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 19:48:37 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-29 19:48:37 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-29 19:48:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 19:48:38 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-29 19:48:38 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-29 19:48:38 LOG5 end_task: Level: (4) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-29 19:48:38 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-29 19:48:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-29 19:48:38 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-29 19:48:38 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-29 19:48:38 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-29 19:48:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-29 19:48:38 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-29 19:48:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-29 19:48:38 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-29 19:48:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-29 19:48:38 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-29 19:48:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-29 19:48:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-29 19:48:38 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-29 19:48:38 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-29 19:48:38 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-29 19:48:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-29 19:48:38 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-29 19:48:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-29 19:48:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-29 19:48:38 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-29 19:48:38 LOG5 end_task: Level: (3) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-29 19:48:38 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-29 19:48:38 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-29 19:48:38 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-29 19:48:38 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-29 19:48:38 LOG5 begin_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-29 19:48:38 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-29 19:48:38 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-29 19:48:38 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-29 19:48:38 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-29 19:48:38 LOG5 end_task: Level: (3) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-29 19:48:38 LOG4 take_data: Call