2009-Apr-22 19:15:28 BEGIN executive: CIMA executive starting ... 2009-Apr-22 19:15:28 NOTE executive: STARTING NEW CIMA SESSION 2009-Apr-22 19:15:28 INFO1 executive: Using CIMA version 3.1.04 'smart' from 2009-04-21 11:22 2009-Apr-22 19:15:28 INFO4 executive: This is an ON-LINE session 2009-Apr-22 19:15:28 INFO4 executive: This is a LOCAL session 2009-Apr-22 19:15:28 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Apr-22 19:15:28 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Betsey Adams' 2009-Apr-22 19:15:28 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090422' 2009-Apr-22 19:15:28 LOG2 log_preferences: Currently applied preferences: 2009-Apr-22 19:15:28 LOG2 log_preferences: prefs(dailylog) = daily 2009-Apr-22 19:15:28 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Apr-22 19:15:28 LOG2 log_preferences: prefs(datawindow) = open 2009-Apr-22 19:15:28 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Apr-22 19:15:28 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Apr-22 19:15:28 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Apr-22 19:15:28 LOG2 log_preferences: prefs(logcolours) = full 2009-Apr-22 19:15:28 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Apr-22 19:15:28 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Apr-22 19:15:28 LOG2 log_preferences: prefs(displayformat) = long 2009-Apr-22 19:15:28 LOG2 log_preferences: prefs(logformat) = new 2009-Apr-22 19:15:28 LOG2 log_preferences: prefs(fontsize) = 3 2009-Apr-22 19:15:28 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-22 19:15:28 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-22 19:15:28 ALERT executive: CIMA executive ready 2009-Apr-22 19:15:30 NOTE frontend: CIMA frontend ready 2009-Apr-22 19:15:33 LOG4 got_cormsg: From DATATAKING: Can't communicate with program corProg 2009-Apr-22 19:15:33 LOG4 got_cormsg: From DATATAKING: vw% setup 2009-Apr-22 19:15:35 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Apr-22 19:15:35 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Apr-22 19:15:35 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Apr-22 19:15:35 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-22 19:15:35 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-22 19:15:35 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-22 19:15:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-22 19:15:35 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-22 19:15:35 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-22 19:15:35 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-22 19:15:35 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-22 19:15:35 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-22 19:15:35 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Apr-22 19:15:35 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-22 19:15:35 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-22 19:15:35 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Apr-22 19:15:40 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Apr-22 19:15:40 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:15:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:15:40 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-22 19:15:40 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-22 19:15:40 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-22 19:15:40 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-22 19:15:40 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-22 19:15:41 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-22 19:15:41 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-22 19:15:41 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-22 19:15:41 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-22 19:15:41 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-22 19:15:44 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-22 19:15:44 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-22 19:15:44 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-22 19:15:44 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-22 19:15:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:15:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:07 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Apr-22 19:16:19 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Apr-22 19:16:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Apr-22 19:16:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Apr-22 19:16:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Apr-22 19:16:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Apr-22 19:16:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Apr-22 19:16:19 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Apr-22 19:16:19 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-22 19:16:19 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Apr-22 19:16:19 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Apr-22 19:16:19 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-22 19:16:19 LOG5 begin_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-22 19:16:19 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Apr-22 19:16:19 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Apr-22 19:16:19 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Apr-22 19:16:20 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-22 19:16:20 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Apr-22 19:16:20 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-22 19:16:20 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-22 19:16:21 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-22 19:16:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-22 19:16:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-22 19:16:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-22 19:16:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-22 19:16:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-22 19:16:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-22 19:16:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-22 19:16:22 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-22 19:16:22 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-22 19:16:22 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-22 19:16:22 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-22 19:16:22 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-22 19:16:22 INFO1 config_iflo: Selecting receiver ALFA 2009-Apr-22 19:16:22 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Apr-22 19:16:22 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Apr-22 19:16:22 START begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-22 19:16:22 LOG5 begin_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-22 19:16:22 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-22 19:16:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-22 19:16:22 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-22 19:16:22 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-22 19:16:22 LOG5 finish_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-22 19:16:22 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Apr-22 19:16:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-22 19:16:22 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-22 19:16:22 LOG5 end_task: Level: (3) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-22 19:16:22 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Apr-22 19:16:22 LOG5 begin_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-22 19:16:22 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Apr-22 19:16:22 LOG5 end_task: Level: (3) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-22 19:16:22 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Apr-22 19:16:22 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Apr-22 19:16:22 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-22 19:16:22 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-22 19:16:22 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-22 19:16:22 LOG5 begin_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-22 19:16:22 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-22 19:16:22 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-22 19:16:22 LOG5 end_task: Level: (3) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-22 19:16:22 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-22 19:16:22 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Apr-22 19:16:22 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-22 19:16:22 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Apr-22 19:16:22 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-22 19:16:22 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-22 19:16:22 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-22 19:16:22 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-22 19:16:22 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-22 19:16:22 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Apr-22 19:16:22 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-22 19:16:22 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-22 19:16:23 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Apr-22 19:16:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-22 19:16:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:16:23 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-22 19:16:23 LOG5 begin_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Apr-22 19:16:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:16:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:31 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:37 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:39 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-22 19:16:39 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-22 19:16:39 LOG5 end_task: Level: (3) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-22 19:16:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-22 19:16:39 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-22 19:16:39 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-22 19:16:39 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-22 19:16:39 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-22 19:16:39 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-22 19:16:39 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-22 19:16:39 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-22 19:16:39 LOG5 begin_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-22 19:16:39 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-22 19:16:39 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-22 19:16:39 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-22 19:16:39 START begin_task: Starting task 'selecting calibration port' 2009-Apr-22 19:16:39 LOG5 begin_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-22 19:16:39 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-22 19:16:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-22 19:16:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:16:39 START begin_task: Starting task 'waiting on calport' 2009-Apr-22 19:16:39 LOG5 begin_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-22 19:16:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:39 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-22 19:16:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:16:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:39 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-22 19:16:39 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-22 19:16:39 LOG5 end_task: Level: (4) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-22 19:16:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-22 19:16:39 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-22 19:16:39 LOG5 end_task: Level: (3) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-22 19:16:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-22 19:16:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-22 19:16:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 19:16:39 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-22 19:16:39 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 19:16:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-22 19:16:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 19:16:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-22 19:16:39 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-22 19:16:39 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-22 19:16:39 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-22 19:16:39 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-22 19:16:39 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-22 19:16:39 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-22 19:16:39 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-22 19:16:39 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-22 19:16:39 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-22 19:16:39 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-22 19:16:39 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-22 19:16:39 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-22 19:16:39 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-22 19:16:39 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-22 19:16:39 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-22 19:16:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 19:16:39 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-22 19:16:40 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 19:16:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-22 19:16:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 19:16:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-22 19:16:40 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-22 19:16:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-22 19:16:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-22 19:16:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-22 19:16:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-22 19:16:40 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-22 19:16:40 LOG5 finish_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-22 19:16:40 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-22 19:16:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-22 19:16:40 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-22 19:16:40 LOG5 end_task: Level: (2) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-22 19:16:40 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Apr-22 19:16:40 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Apr-22 19:16:40 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Apr-22 19:16:40 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Apr-22 19:16:40 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Apr-22 19:16:40 LOG5 begin_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-22 19:16:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Apr-22 19:16:40 LOG3 track_source: Calling 'track_source galfasrc 090000.0 +210254 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-22 19:16:40 START begin_task: Starting task 'sending tracking commands' 2009-Apr-22 19:16:40 LOG5 begin_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-22 19:16:40 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Apr-22 19:16:40 INFO1 track_source: Starting to track galfasrc 2009-Apr-22 19:16:40 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-22 19:16:40 LOG3 vw_send: To DATATAKING: set ra 090000.0 2009-Apr-22 19:16:40 LOG3 vw_send: To DATATAKING: set dec +210254 2009-Apr-22 19:16:40 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-22 19:16:40 LOG3 vw_send: To DATATAKING: pnt tr 090000.0 +210254 -CJ 2009-Apr-22 19:16:40 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-22 19:16:40 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-22 19:16:40 LOG5 finish_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-22 19:16:40 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-22 19:16:40 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-22 19:16:40 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-22 19:16:40 LOG5 end_task: Level: (3) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-22 19:16:40 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Apr-22 19:16:40 LOG5 finish_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-22 19:16:40 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Apr-22 19:16:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-22 19:16:40 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Apr-22 19:16:40 LOG5 end_task: Level: (2) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-22 19:16:40 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Apr-22 19:16:41 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Apr-22 19:16:41 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-22 19:16:41 LOG5 begin_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-22 19:16:41 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-22 19:16:41 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-22 19:16:41 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-22 19:16:41 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-22 19:16:41 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-22 19:16:41 LOG5 begin_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-22 19:16:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-22 19:16:41 NOTE WAPPDATA-new_file: New FITS file: wapp.20090422.a2010.0000.fits 2009-Apr-22 19:16:41 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-22 19:16:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-22 19:16:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-22 19:16:41 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090422.a2010.0000.fits} 2009-Apr-22 19:16:41 LOG4 got_cormsg: From DATATAKING: set ra 090000.0 2009-Apr-22 19:16:41 LOG4 got_cormsg: From DATATAKING: set dec +210254 2009-Apr-22 19:16:41 LOG4 got_cormsg: From DATATAKING: vw% 090000.0 2009-Apr-22 19:16:41 LOG4 got_cormsg: From DATATAKING: vw% +210254 2009-Apr-22 19:16:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:41 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-22 19:16:41 LOG4 got_cormsg: From DATATAKING: pnt tr 090000.0 +210254 -CJ 2009-Apr-22 19:16:41 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-22 19:16:41 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-22 19:16:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:16:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-22 19:16:48 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-22 19:16:48 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-22 19:16:48 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-22 19:16:48 LOG5 end_task: Level: (3) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-22 19:16:48 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-22 19:16:48 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-22 19:16:48 LOG5 finish_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-22 19:16:48 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-22 19:16:48 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-22 19:16:48 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-22 19:16:48 LOG5 end_task: Level: (2) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-22 19:16:48 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Apr-22 19:16:48 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Apr-22 19:16:48 LOG5 begin_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-22 19:16:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-22 19:16:48 LOG3 waittrk: Start waittrk 5 2009-Apr-22 19:16:48 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-22 19:16:48 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-22 19:16:53 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-22 19:16:53 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-22 19:16:53 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-22 19:16:53 LOG5 begin_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-22 19:17:51 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-22 19:17:51 LOG5 end_task: Level: (3) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-22 19:17:51 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-22 19:17:51 INFO2 waittrk: Now tracking galfasrc 2009-Apr-22 19:17:51 LOG4 waittrk: Current telescope position: Az = 203.85 ZA = 2.93 2009-Apr-22 19:17:51 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-22 19:17:51 LOG5 finish_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-22 19:17:51 DONE finish_task: DONE finished waiting: telescope on source 2009-Apr-22 19:17:51 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-22 19:17:51 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-22 19:17:51 LOG5 end_task: Level: (2) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-22 19:17:51 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-22 19:17:51 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Apr-22 19:17:51 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-22 19:17:51 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-22 19:17:51 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Apr-22 19:17:52 LOG5 begin_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-22 19:17:52 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Apr-22 19:17:52 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Apr-22 19:17:52 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Apr-22 19:17:52 START begin_task: Starting task 'selecting calibration type' 2009-Apr-22 19:17:52 LOG5 begin_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-22 19:17:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-22 19:17:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-22 19:17:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:17:52 START begin_task: Starting task 'waiting on setcal' 2009-Apr-22 19:17:52 LOG5 begin_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-22 19:17:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-22 19:17:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:17:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:17:52 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-22 19:17:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-22 19:17:52 LOG5 end_task: Level: (4) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-22 19:17:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-22 19:17:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-22 19:17:52 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-22 19:17:52 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-22 19:17:52 LOG5 begin_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-22 19:17:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:17:52 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-22 19:17:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-22 19:17:52 LOG5 end_task: Level: (4) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-22 19:17:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-22 19:17:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-22 19:17:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-22 19:17:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-22 19:17:52 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-22 19:17:52 LOG5 begin_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-22 19:17:52 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-22 19:17:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-22 19:17:52 LOG5 end_task: Level: (4) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-22 19:17:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-22 19:17:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-22 19:17:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-22 19:17:52 LOG5 end_task: Level: (3) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-22 19:17:52 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-22 19:17:52 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-22 19:17:52 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-22 19:17:52 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-22 19:17:52 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090422.a2010.0000.fits' is empty! 2009-Apr-22 19:17:52 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Apr-22 19:17:52 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-22 19:17:52 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-22 19:17:52 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-22 19:17:52 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-22 19:17:52 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 19:17:52 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-22 19:17:52 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 19:17:52 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-22 19:17:52 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 19:17:52 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-22 19:17:52 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-22 19:17:52 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-22 19:17:52 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-22 19:17:52 LOG5 begin_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-22 19:17:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-22 19:17:52 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-22 19:17:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-22 19:17:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-22 19:17:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:17:53 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-22 19:17:53 LOG5 begin_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-22 19:17:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-22 19:17:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:17:53 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-22 19:17:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:17:56 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-22 19:17:56 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-22 19:17:56 LOG5 end_task: Level: (4) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-22 19:17:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-22 19:17:56 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-22 19:17:56 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-22 19:17:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-22 19:17:56 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-22 19:17:56 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-22 19:17:56 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-22 19:17:56 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-22 19:17:56 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-22 19:17:56 LOG5 begin_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-22 19:17:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-22 19:17:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:17:56 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-22 19:17:56 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 2 dB 2009-Apr-22 19:17:56 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-22 19:17:56 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-22 19:17:56 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-22 19:17:56 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-22 19:17:56 LOG5 end_task: Level: (5) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-22 19:17:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.015 1.042 ALFA beam 1: 0.988 0.989 2009-Apr-22 19:17:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.952 0.904 ALFA beam 3: 0.989 1.015 2009-Apr-22 19:17:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.993 1.047 ALFA beam 5: 0.974 1.054 2009-Apr-22 19:17:56 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.033 0.097 ALFA beam 7: 0.917 0.120 2009-Apr-22 19:17:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-22 19:17:56 LOG5 finish_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-22 19:17:56 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-22 19:17:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-22 19:17:56 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-22 19:17:56 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-22 19:17:56 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-22 19:17:56 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-22 19:17:56 LOG5 finish_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-22 19:17:56 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-22 19:17:56 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-22 19:17:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-22 19:17:57 LOG5 end_task: Level: (3) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-22 19:17:57 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-22 19:17:57 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-22 19:17:57 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-22 19:17:57 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:17:57 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30884 J 2009-Apr-22 19:17:57 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:17:57 LOG2 antvel: Parameters to Doppler: Topocentric 83876 2009 112 0.0 2009-Apr-22 19:17:57 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:17:57 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-22 19:17:57 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-22 19:17:57 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:17:57 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:17:57 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-22 19:17:57 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:17:57 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-22 19:17:57 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:17:57 LOG5 begin_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-22 19:17:57 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-22 19:17:57 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.924773 2009.3088408497476 18.999933 2009-Apr-22 19:17:57 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999988 21.048333333333339 2009-Apr-22 19:17:57 LOG4 log_alfabeam: ALFABEAM 1 8.998021658913784 20.945914936788810 2009-Apr-22 19:17:57 LOG4 log_alfabeam: ALFABEAM 2 9.004502033446910 20.980422262107783 2009-Apr-22 19:17:57 LOG4 log_alfabeam: ALFABEAM 3 9.006630992373868 21.082319957201740 2009-Apr-22 19:17:57 LOG4 log_alfabeam: ALFABEAM 4 9.001896312081266 21.151166661188011 2009-Apr-22 19:17:57 LOG4 log_alfabeam: ALFABEAM 5 8.995284428061010 21.114725821826418 2009-Apr-22 19:17:57 LOG4 log_alfabeam: ALFABEAM 6 8.993539969460246 21.011439937661912 2009-Apr-22 19:17:57 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200220 2009-Apr-22 19:17:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:17:57 LOG5 begin_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-22 19:17:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:17:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-22 19:17:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:17:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:17:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:17:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-22 19:17:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83878.00 2009-Apr-22 19:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:17:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:17:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.097 < 0.75)! 2009-Apr-22 19:17:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.048 1.072 1.021 1.010 2009-Apr-22 19:17:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 0.929 1.062 1.060 2009-Apr-22 19:17:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.047 1.091 1.037 1.110 2009-Apr-22 19:17:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.033 0.097 0.917 0.120 2009-Apr-22 19:18:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 19:18:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-22 19:18:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-22 19:18:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:18:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:18:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:18:08 LOG5 end_task: Level: (4) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-22 19:18:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:18:08 LOG5 end_task: Level: (3) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-22 19:18:08 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-22 19:18:08 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-22 19:18:08 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-22 19:18:08 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:18:08 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30884 J 2009-Apr-22 19:18:08 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:18:08 LOG2 antvel: Parameters to Doppler: Topocentric 83887 2009 112 0.0 2009-Apr-22 19:18:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:18:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-22 19:18:08 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-22 19:18:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:18:08 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:18:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-22 19:18:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:18:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-22 19:18:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:18:08 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-22 19:18:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-22 19:18:08 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.927837 2009.3088411983167 18.999933 2009-Apr-22 19:18:08 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999993 21.048333333333332 2009-Apr-22 19:18:08 LOG4 log_alfabeam: ALFABEAM 1 8.998122408512783 20.945544002846685 2009-Apr-22 19:18:08 LOG4 log_alfabeam: ALFABEAM 2 9.004567852192411 20.981293419780091 2009-Apr-22 19:18:08 LOG4 log_alfabeam: ALFABEAM 3 9.006597406201578 21.083588109501061 2009-Apr-22 19:18:08 LOG4 log_alfabeam: ALFABEAM 4 9.001794514148759 21.151524135898118 2009-Apr-22 19:18:08 LOG4 log_alfabeam: ALFABEAM 5 8.995218843719991 21.113804371355968 2009-Apr-22 19:18:08 LOG4 log_alfabeam: ALFABEAM 6 8.993577467286617 21.010188113044389 2009-Apr-22 19:18:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200221 2009-Apr-22 19:18:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:18:09 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-22 19:18:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:18:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-22 19:18:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:18:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:18:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:18:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-22 19:18:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83890.00 2009-Apr-22 19:18:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:18:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:18:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2009-Apr-22 19:18:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.102 (still bad) 2009-Apr-22 19:18:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.093 (still bad) 2009-Apr-22 19:18:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-22 19:18:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2009-Apr-22 19:18:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:18:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:18:20 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-22 19:18:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:18:20 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-22 19:18:20 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-22 19:18:20 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-22 19:18:20 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-22 19:18:20 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:18:20 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30884 J 2009-Apr-22 19:18:20 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:18:20 LOG2 antvel: Parameters to Doppler: Topocentric 83900 2009 112 0.0 2009-Apr-22 19:18:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:18:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-22 19:18:20 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-22 19:18:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:18:20 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:18:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-22 19:18:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:18:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-22 19:18:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:18:20 LOG5 begin_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-22 19:18:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-22 19:18:20 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.931458 2009.3088416102619 18.999933 2009-Apr-22 19:18:20 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999986 21.048333333333332 2009-Apr-22 19:18:20 LOG4 log_alfabeam: ALFABEAM 1 8.998243475812320 20.945125521143868 2009-Apr-22 19:18:20 LOG4 log_alfabeam: ALFABEAM 2 9.004645529784437 20.982352769874296 2009-Apr-22 19:18:20 LOG4 log_alfabeam: ALFABEAM 3 9.006555556246155 21.085097808902351 2009-Apr-22 19:18:20 LOG4 log_alfabeam: ALFABEAM 4 9.001672225722533 21.151926018197688 2009-Apr-22 19:18:20 LOG4 log_alfabeam: ALFABEAM 5 8.995141577780192 21.112684962462694 2009-Apr-22 19:18:20 LOG4 log_alfabeam: ALFABEAM 6 8.993623954198373 21.008699894632031 2009-Apr-22 19:18:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200222 2009-Apr-22 19:18:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:18:21 LOG5 begin_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-22 19:18:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-22 19:18:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:18:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:18:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:18:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:18:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-22 19:18:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83902.00 2009-Apr-22 19:18:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2009-Apr-22 19:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:18:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:18:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.091 (still bad) 2009-Apr-22 19:18:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.097 (still bad) 2009-Apr-22 19:18:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-22 19:18:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-22 19:18:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:18:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:18:32 LOG5 end_task: Level: (4) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-22 19:18:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:18:32 LOG5 end_task: Level: (3) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-22 19:18:32 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-22 19:18:32 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-22 19:18:32 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-22 19:18:32 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:18:32 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30884 J 2009-Apr-22 19:18:32 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:18:32 LOG2 antvel: Parameters to Doppler: Topocentric 83912 2009 112 0.0 2009-Apr-22 19:18:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:18:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-22 19:18:32 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-22 19:18:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:18:32 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:18:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-22 19:18:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:18:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-22 19:18:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:18:32 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-22 19:18:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-22 19:18:32 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.934800 2009.3088419905189 18.999933 2009-Apr-22 19:18:32 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999989 21.048333333333346 2009-Apr-22 19:18:32 LOG4 log_alfabeam: ALFABEAM 1 8.998357105470495 20.944759514265950 2009-Apr-22 19:18:32 LOG4 log_alfabeam: ALFABEAM 2 9.004717046307405 20.983359337860200 2009-Apr-22 19:18:32 LOG4 log_alfabeam: ALFABEAM 3 9.006514812478894 21.086500813981864 2009-Apr-22 19:18:32 LOG4 log_alfabeam: ALFABEAM 4 9.001557488709123 21.152276038377106 2009-Apr-22 19:18:32 LOG4 log_alfabeam: ALFABEAM 5 8.995070574984208 21.111622435416574 2009-Apr-22 19:18:32 LOG4 log_alfabeam: ALFABEAM 6 8.993668984525080 21.007318863563082 2009-Apr-22 19:18:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200223 2009-Apr-22 19:18:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:18:33 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-22 19:18:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-22 19:18:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:18:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-22 19:18:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:18:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:18:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:18:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-22 19:18:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83914.00 2009-Apr-22 19:18:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:18:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:18:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:18:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:18:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:18:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:18:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:18:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:18:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-22 19:18:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:18:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:18:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:18:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.082 (still bad) 2009-Apr-22 19:18:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:18:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:18:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:18:44 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-22 19:18:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:18:44 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-22 19:18:44 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-22 19:18:44 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-22 19:18:44 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-22 19:18:44 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:18:44 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30884 J 2009-Apr-22 19:18:44 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:18:44 LOG2 antvel: Parameters to Doppler: Topocentric 83924 2009 112 0.0 2009-Apr-22 19:18:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:18:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-22 19:18:44 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-22 19:18:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:18:44 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:18:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-22 19:18:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:18:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-22 19:18:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:18:44 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-22 19:18:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-22 19:18:44 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.938143 2009.3088423707759 18.999933 2009-Apr-22 19:18:44 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999988 21.048333333333343 2009-Apr-22 19:18:44 LOG4 log_alfabeam: ALFABEAM 1 8.998472545218945 20.944413929455425 2009-Apr-22 19:18:44 LOG4 log_alfabeam: ALFABEAM 2 9.004788339659962 20.984394015713470 2009-Apr-22 19:18:44 LOG4 log_alfabeam: ALFABEAM 3 9.006471981894324 21.087912479925460 2009-Apr-22 19:18:44 LOG4 log_alfabeam: ALFABEAM 4 9.001440962798549 21.152604994355666 2009-Apr-22 19:18:44 LOG4 log_alfabeam: ALFABEAM 5 8.994999928091524 21.110531350691435 2009-Apr-22 19:18:44 LOG4 log_alfabeam: ALFABEAM 6 8.993716102508079 21.005931283475537 2009-Apr-22 19:18:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200224 2009-Apr-22 19:18:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:18:45 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-22 19:18:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:18:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-22 19:18:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:18:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:18:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:18:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.083 (still bad) 2009-Apr-22 19:18:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-22 19:18:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83926.00 2009-Apr-22 19:18:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:18:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:18:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:18:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:18:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:18:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:18:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:18:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:18:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:18:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.083 (still bad) 2009-Apr-22 19:18:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.075 (still bad) 2009-Apr-22 19:18:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.073 (still bad) 2009-Apr-22 19:18:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.076 (still bad) 2009-Apr-22 19:18:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.073 (still bad) 2009-Apr-22 19:18:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:18:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:18:56 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-22 19:18:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:18:56 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-22 19:18:56 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-22 19:18:56 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-22 19:18:56 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-22 19:18:56 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:18:56 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30884 J 2009-Apr-22 19:18:56 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:18:56 LOG2 antvel: Parameters to Doppler: Topocentric 83936 2009 112 0.0 2009-Apr-22 19:18:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:18:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-22 19:18:56 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-22 19:18:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:18:56 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:18:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-22 19:18:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:18:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-22 19:18:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:18:56 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-22 19:18:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-22 19:18:56 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.941485 2009.3088427510329 18.999933 2009-Apr-22 19:18:56 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999938 21.048333333333350 2009-Apr-22 19:18:56 LOG4 log_alfabeam: ALFABEAM 1 8.998589681752639 20.944090042989913 2009-Apr-22 19:18:56 LOG4 log_alfabeam: ALFABEAM 2 9.004859291179672 20.985456232471158 2009-Apr-22 19:18:56 LOG4 log_alfabeam: ALFABEAM 3 9.006427054164488 21.089330923386036 2009-Apr-22 19:18:56 LOG4 log_alfabeam: ALFABEAM 4 9.001322764551285 21.152911624569789 2009-Apr-22 19:18:56 LOG4 log_alfabeam: ALFABEAM 5 8.994929759103508 21.109412391970753 2009-Apr-22 19:18:56 LOG4 log_alfabeam: ALFABEAM 6 8.993765308703274 21.004539059304058 2009-Apr-22 19:18:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200225 2009-Apr-22 19:18:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:18:57 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-22 19:18:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:18:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-22 19:18:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:18:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:18:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:18:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.072 (still bad) 2009-Apr-22 19:18:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-22 19:18:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83938.00 2009-Apr-22 19:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:18:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:18:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.072 (still bad) 2009-Apr-22 19:19:01 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:19:01 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.040 0.981 0.983 2009-Apr-22 19:19:01 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 0.903 1.002 1.033 2009-Apr-22 19:19:01 LOG4 check_wapp_levels: WAPP-3 power levels: 1.003 1.069 0.965 1.062 2009-Apr-22 19:19:01 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.099 0.933 0.122 2009-Apr-22 19:19:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.070 (still bad) 2009-Apr-22 19:19:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.069 (still bad) 2009-Apr-22 19:19:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.072 (still bad) 2009-Apr-22 19:19:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:19:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:19:08 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-22 19:19:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:19:08 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-22 19:19:08 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-22 19:19:08 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-22 19:19:08 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-22 19:19:08 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:19:08 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30884 J 2009-Apr-22 19:19:08 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:19:08 LOG2 antvel: Parameters to Doppler: Topocentric 83948 2009 112 0.0 2009-Apr-22 19:19:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:19:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-22 19:19:08 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-22 19:19:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:19:08 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:19:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-22 19:19:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:19:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-22 19:19:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:19:08 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-22 19:19:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-22 19:19:08 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.944828 2009.3088431312901 18.999933 2009-Apr-22 19:19:08 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999945 21.048333333333325 2009-Apr-22 19:19:08 LOG4 log_alfabeam: ALFABEAM 1 8.998708535207676 20.943788722773760 2009-Apr-22 19:19:08 LOG4 log_alfabeam: ALFABEAM 2 9.004929865039008 20.986546610018600 2009-Apr-22 19:19:08 LOG4 log_alfabeam: ALFABEAM 3 9.006379969888501 21.090755896327781 2009-Apr-22 19:19:08 LOG4 log_alfabeam: ALFABEAM 4 9.001202875845529 21.153195057929462 2009-Apr-22 19:19:08 LOG4 log_alfabeam: ALFABEAM 5 8.994860107759186 21.108264987392580 2009-Apr-22 19:19:08 LOG4 log_alfabeam: ALFABEAM 6 8.993816657543245 21.003142485247320 2009-Apr-22 19:19:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200226 2009-Apr-22 19:19:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:19:09 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-22 19:19:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:19:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-22 19:19:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:19:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:19:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:19:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-22 19:19:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83950.00 2009-Apr-22 19:19:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.072 (still bad) 2009-Apr-22 19:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:19:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:19:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.068 (still bad) 2009-Apr-22 19:19:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.070 (still bad) 2009-Apr-22 19:19:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.069 (still bad) 2009-Apr-22 19:19:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.071 (still bad) 2009-Apr-22 19:19:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.071 (still bad) 2009-Apr-22 19:19:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:19:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:19:20 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-22 19:19:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:19:20 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-22 19:19:20 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-22 19:19:20 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-22 19:19:20 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-22 19:19:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 19:19:20 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-22 19:19:20 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 19:19:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-22 19:19:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 19:19:20 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-22 19:19:20 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-22 19:19:20 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-22 19:19:20 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-22 19:19:20 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-22 19:19:20 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:19:20 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30884 J 2009-Apr-22 19:19:20 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:19:20 LOG2 antvel: Parameters to Doppler: Topocentric 83960 2009 112 0.0 2009-Apr-22 19:19:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:19:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-22 19:19:20 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-22 19:19:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:19:20 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:19:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-22 19:19:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:19:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-22 19:19:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:19:20 LOG5 begin_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-22 19:19:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-22 19:19:20 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.948170 2009.3088435115471 18.999933 2009-Apr-22 19:19:20 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999982 21.048333333333325 2009-Apr-22 19:19:20 LOG4 log_alfabeam: ALFABEAM 1 8.998828978745220 20.943511196882916 2009-Apr-22 19:19:20 LOG4 log_alfabeam: ALFABEAM 2 9.004999938743397 20.987664417034154 2009-Apr-22 19:19:20 LOG4 log_alfabeam: ALFABEAM 3 9.006330728525271 21.092185393922332 2009-Apr-22 19:19:20 LOG4 log_alfabeam: ALFABEAM 4 9.001081426818171 21.153454086670568 2009-Apr-22 19:19:20 LOG4 log_alfabeam: ALFABEAM 5 8.994791099122791 21.107089991129623 2009-Apr-22 19:19:20 LOG4 log_alfabeam: ALFABEAM 6 8.993870139196847 21.001743573565918 2009-Apr-22 19:19:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200227 2009-Apr-22 19:19:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:19:21 LOG5 begin_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-22 19:19:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:19:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-22 19:19:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:19:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:19:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:19:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-22 19:19:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83962.00 2009-Apr-22 19:19:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.071 (still bad) 2009-Apr-22 19:19:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:19:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:19:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:19:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:19:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:19:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:19:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:19:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:19:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:19:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.531 (still bad) 2009-Apr-22 19:19:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.528 (still bad) 2009-Apr-22 19:19:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.527 (still bad) 2009-Apr-22 19:19:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.528 (still bad) 2009-Apr-22 19:19:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:19:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:19:32 LOG5 end_task: Level: (4) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-22 19:19:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:19:32 LOG5 end_task: Level: (3) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-22 19:19:32 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-22 19:19:32 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-22 19:19:32 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-22 19:19:32 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:19:32 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30884 J 2009-Apr-22 19:19:32 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:19:32 LOG2 antvel: Parameters to Doppler: Topocentric 83972 2009 112 0.0 2009-Apr-22 19:19:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:19:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-22 19:19:32 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-22 19:19:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:19:32 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:19:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-22 19:19:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:19:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-22 19:19:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:19:32 LOG5 begin_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-22 19:19:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-22 19:19:32 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.951513 2009.3088438918041 18.999933 2009-Apr-22 19:19:32 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999972 21.048333333333346 2009-Apr-22 19:19:32 LOG4 log_alfabeam: ALFABEAM 1 8.998951022845134 20.943258328417375 2009-Apr-22 19:19:32 LOG4 log_alfabeam: ALFABEAM 2 9.005069472166069 20.988810175082289 2009-Apr-22 19:19:32 LOG4 log_alfabeam: ALFABEAM 3 9.006279276015270 21.093619065292216 2009-Apr-22 19:19:32 LOG4 log_alfabeam: ALFABEAM 4 9.000958409083999 21.153687848796579 2009-Apr-22 19:19:32 LOG4 log_alfabeam: ALFABEAM 5 8.994722776724503 21.105886940710128 2009-Apr-22 19:19:32 LOG4 log_alfabeam: ALFABEAM 6 8.993925802170516 21.000342711349163 2009-Apr-22 19:19:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200228 2009-Apr-22 19:19:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:19:33 LOG5 begin_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-22 19:19:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.530 (still bad) 2009-Apr-22 19:19:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:19:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-22 19:19:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:19:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:19:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:19:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-22 19:19:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83974.00 2009-Apr-22 19:19:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:19:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:19:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:19:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:19:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:19:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:19:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:19:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:19:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.530 (still bad) 2009-Apr-22 19:19:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:19:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.525 (still bad) 2009-Apr-22 19:19:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.532 (still bad) 2009-Apr-22 19:19:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.528 (still bad) 2009-Apr-22 19:19:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.532 (still bad) 2009-Apr-22 19:19:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:19:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:19:44 LOG5 end_task: Level: (4) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-22 19:19:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:19:44 LOG5 end_task: Level: (3) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-22 19:19:44 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-22 19:19:44 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-22 19:19:44 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-22 19:19:44 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:19:44 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30884 J 2009-Apr-22 19:19:44 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:19:44 LOG2 antvel: Parameters to Doppler: Topocentric 83984 2009 112 0.0 2009-Apr-22 19:19:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:19:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-22 19:19:44 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-22 19:19:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:19:44 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:19:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-22 19:19:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:19:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-22 19:19:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:19:44 LOG5 begin_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-22 19:19:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-22 19:19:44 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.954855 2009.3088442720612 18.999933 2009-Apr-22 19:19:44 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999966 21.048333333333339 2009-Apr-22 19:19:44 LOG4 log_alfabeam: ALFABEAM 1 8.999074527062159 20.943031272662033 2009-Apr-22 19:19:44 LOG4 log_alfabeam: ALFABEAM 2 9.005138340209632 20.989982980185065 2009-Apr-22 19:19:44 LOG4 log_alfabeam: ALFABEAM 3 9.006225623016933 21.095054796120348 2009-Apr-22 19:19:44 LOG4 log_alfabeam: ALFABEAM 4 9.000833966367908 21.153895215246258 2009-Apr-22 19:19:44 LOG4 log_alfabeam: ALFABEAM 5 8.994655267310479 21.104656871917907 2009-Apr-22 19:19:44 LOG4 log_alfabeam: ALFABEAM 6 8.993983624966218 20.998942004205610 2009-Apr-22 19:19:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200229 2009-Apr-22 19:19:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:19:45 LOG5 begin_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-22 19:19:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:19:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-22 19:19:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:19:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:19:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:19:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.529 (still bad) 2009-Apr-22 19:19:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-22 19:19:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83986.00 2009-Apr-22 19:19:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:19:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:19:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:19:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:19:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:19:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:19:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:19:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:19:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:19:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.529 (still bad) 2009-Apr-22 19:19:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.527 (still bad) 2009-Apr-22 19:19:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.529 (still bad) 2009-Apr-22 19:19:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.530 (still bad) 2009-Apr-22 19:19:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.531 (still bad) 2009-Apr-22 19:19:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:19:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:19:56 LOG5 end_task: Level: (4) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-22 19:19:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:19:56 LOG5 end_task: Level: (3) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-22 19:19:56 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-22 19:19:56 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-22 19:19:56 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-22 19:19:56 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:19:56 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30884 J 2009-Apr-22 19:19:56 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:19:56 LOG2 antvel: Parameters to Doppler: Topocentric 83996 2009 112 0.0 2009-Apr-22 19:19:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:19:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-22 19:19:56 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-22 19:19:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:19:56 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:19:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-22 19:19:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:19:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-22 19:19:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:19:56 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-22 19:19:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-22 19:19:56 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.958197 2009.3088446523182 18.999933 2009-Apr-22 19:19:56 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999943 21.048333333333339 2009-Apr-22 19:19:56 LOG4 log_alfabeam: ALFABEAM 1 8.999199454429808 20.942830923316777 2009-Apr-22 19:19:56 LOG4 log_alfabeam: ALFABEAM 2 9.005206479131175 20.991182878804885 2009-Apr-22 19:19:56 LOG4 log_alfabeam: ALFABEAM 3 9.006169739122818 21.096491711107443 2009-Apr-22 19:19:56 LOG4 log_alfabeam: ALFABEAM 4 9.000708138022608 21.154075304157978 2009-Apr-22 19:19:56 LOG4 log_alfabeam: ALFABEAM 5 8.994588636910198 21.103399822562743 2009-Apr-22 19:19:56 LOG4 log_alfabeam: ALFABEAM 6 8.994043630739922 20.997542340429217 2009-Apr-22 19:19:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200230 2009-Apr-22 19:19:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:19:57 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-22 19:19:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:19:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-22 19:19:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:19:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:19:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-22 19:19:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.531 (still bad) 2009-Apr-22 19:19:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 83998.00 2009-Apr-22 19:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:19:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:19:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.524 (still bad) 2009-Apr-22 19:20:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.534 (still bad) 2009-Apr-22 19:20:03 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:20:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.439 1.437 1.370 1.362 2009-Apr-22 19:20:03 LOG4 check_wapp_levels: WAPP-2 power levels: 1.332 1.264 1.428 1.436 2009-Apr-22 19:20:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.439 1.521 1.392 1.442 2009-Apr-22 19:20:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.516 0.099 1.336 0.123 2009-Apr-22 19:20:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.522 (still bad) 2009-Apr-22 19:20:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.524 (still bad) 2009-Apr-22 19:20:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:20:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:20:08 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-22 19:20:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:20:08 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-22 19:20:08 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-22 19:20:08 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-22 19:20:08 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-22 19:20:08 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:20:08 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:20:08 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:20:08 LOG2 antvel: Parameters to Doppler: Topocentric 84008 2009 112 0.0 2009-Apr-22 19:20:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:20:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-22 19:20:08 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-22 19:20:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:20:08 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:20:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-22 19:20:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:20:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-22 19:20:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:20:08 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-22 19:20:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-22 19:20:08 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.961540 2009.3088450325754 18.999933 2009-Apr-22 19:20:08 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999964 21.048333333333343 2009-Apr-22 19:20:08 LOG4 log_alfabeam: ALFABEAM 1 8.999325763920591 20.942658169361984 2009-Apr-22 19:20:08 LOG4 log_alfabeam: ALFABEAM 2 9.005273823501510 20.992409873955324 2009-Apr-22 19:20:08 LOG4 log_alfabeam: ALFABEAM 3 9.006111596332019 21.097928892850515 2009-Apr-22 19:20:08 LOG4 log_alfabeam: ALFABEAM 4 9.000580967475901 21.154227240409554 2009-Apr-22 19:20:08 LOG4 log_alfabeam: ALFABEAM 5 8.994522952960139 21.102115877527417 2009-Apr-22 19:20:08 LOG4 log_alfabeam: ALFABEAM 6 8.994105840027556 20.996144645286950 2009-Apr-22 19:20:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200231 2009-Apr-22 19:20:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:20:09 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-22 19:20:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-22 19:20:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:20:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:20:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:20:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:20:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-22 19:20:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84010.00 2009-Apr-22 19:20:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.521 (still bad) 2009-Apr-22 19:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:20:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:20:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.511 (still bad) 2009-Apr-22 19:20:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.518 (still bad) 2009-Apr-22 19:20:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.510 (still bad) 2009-Apr-22 19:20:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.511 (still bad) 2009-Apr-22 19:20:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.509 (still bad) 2009-Apr-22 19:20:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:20:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:20:20 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-22 19:20:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:20:20 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-22 19:20:20 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-22 19:20:20 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-22 19:20:20 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-22 19:20:20 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:20:20 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:20:20 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:20:20 LOG2 antvel: Parameters to Doppler: Topocentric 84020 2009 112 0.0 2009-Apr-22 19:20:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:20:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-22 19:20:20 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-22 19:20:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:20:20 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:20:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-22 19:20:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:20:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-22 19:20:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:20:20 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-22 19:20:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-22 19:20:20 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.964882 2009.3088454128324 18.999933 2009-Apr-22 19:20:20 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999957 21.048333333333339 2009-Apr-22 19:20:20 LOG4 log_alfabeam: ALFABEAM 1 8.999453295295080 20.942514008081211 2009-Apr-22 19:20:20 LOG4 log_alfabeam: ALFABEAM 2 9.005340247117406 20.993662785926972 2009-Apr-22 19:20:20 LOG4 log_alfabeam: ALFABEAM 3 9.006051224509971 21.099364094933691 2009-Apr-22 19:20:20 LOG4 log_alfabeam: ALFABEAM 4 9.000452618086937 21.154350062052359 2009-Apr-22 19:20:20 LOG4 log_alfabeam: ALFABEAM 5 8.994458341668933 21.100806358531354 2009-Apr-22 19:20:20 LOG4 log_alfabeam: ALFABEAM 6 8.994170211745487 20.994751129157077 2009-Apr-22 19:20:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200232 2009-Apr-22 19:20:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:20:21 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-22 19:20:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:20:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-22 19:20:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:20:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:20:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:20:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-22 19:20:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84022.00 2009-Apr-22 19:20:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.508 (still bad) 2009-Apr-22 19:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:20:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:20:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.506 (still bad) 2009-Apr-22 19:20:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.518 (still bad) 2009-Apr-22 19:20:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.511 (still bad) 2009-Apr-22 19:20:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.510 (still bad) 2009-Apr-22 19:20:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:20:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:20:32 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-22 19:20:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:20:32 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-22 19:20:32 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-22 19:20:32 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-22 19:20:32 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-22 19:20:32 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:20:32 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:20:32 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:20:32 LOG2 antvel: Parameters to Doppler: Topocentric 84032 2009 112 0.0 2009-Apr-22 19:20:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:20:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-22 19:20:32 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-22 19:20:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:20:32 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:20:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-22 19:20:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:20:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-22 19:20:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:20:32 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-22 19:20:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-22 19:20:32 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.968225 2009.3088457930894 18.999933 2009-Apr-22 19:20:32 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999970 21.048333333333346 2009-Apr-22 19:20:32 LOG4 log_alfabeam: ALFABEAM 1 8.999582034674289 20.942399198688747 2009-Apr-22 19:20:32 LOG4 log_alfabeam: ALFABEAM 2 9.005405703718766 20.994941839851219 2009-Apr-22 19:20:32 LOG4 log_alfabeam: ALFABEAM 3 9.005988588219372 21.100796754859179 2009-Apr-22 19:20:32 LOG4 log_alfabeam: ALFABEAM 4 9.000323105784618 21.154443022683171 2009-Apr-22 19:20:32 LOG4 log_alfabeam: ALFABEAM 5 8.994394850862946 21.099471117057565 2009-Apr-22 19:20:32 LOG4 log_alfabeam: ALFABEAM 6 8.994236774871151 20.993362358643274 2009-Apr-22 19:20:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200233 2009-Apr-22 19:20:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:20:33 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-22 19:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.514 (still bad) 2009-Apr-22 19:20:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:20:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-22 19:20:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:20:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:20:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:20:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-22 19:20:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84034.00 2009-Apr-22 19:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:20:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.514 (still bad) 2009-Apr-22 19:20:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:20:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.508 (still bad) 2009-Apr-22 19:20:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.510 (still bad) 2009-Apr-22 19:20:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.507 (still bad) 2009-Apr-22 19:20:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.509 (still bad) 2009-Apr-22 19:20:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:20:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:20:44 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-22 19:20:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:20:44 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-22 19:20:44 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Apr-22 19:20:44 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-22 19:20:44 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-22 19:20:44 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-22 19:20:44 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-22 19:20:44 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 19:20:44 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-22 19:20:44 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 19:20:44 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-22 19:20:44 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 19:20:44 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-22 19:20:44 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-22 19:20:44 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-22 19:20:44 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-22 19:20:44 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-22 19:20:44 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-22 19:20:44 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:20:44 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:20:44 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:20:44 LOG2 antvel: Parameters to Doppler: Topocentric 84044 2009 112 0.0 2009-Apr-22 19:20:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:20:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-22 19:20:44 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-22 19:20:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:20:44 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:20:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-22 19:20:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:20:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-22 19:20:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:20:44 LOG5 begin_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-22 19:20:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-22 19:20:44 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.971567 2009.3088461733464 18.999933 2009-Apr-22 19:20:44 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999940 21.048333333333343 2009-Apr-22 19:20:44 LOG4 log_alfabeam: ALFABEAM 1 8.999711809590991 20.942314600268944 2009-Apr-22 19:20:44 LOG4 log_alfabeam: ALFABEAM 2 9.005470068510631 20.996245666511420 2009-Apr-22 19:20:44 LOG4 log_alfabeam: ALFABEAM 3 9.005923731463390 21.102224565853884 2009-Apr-22 19:20:44 LOG4 log_alfabeam: ALFABEAM 4 9.000192605953561 21.154505304507882 2009-Apr-22 19:20:44 LOG4 log_alfabeam: ALFABEAM 5 8.994332604102214 21.098111668324787 2009-Apr-22 19:20:44 LOG4 log_alfabeam: ALFABEAM 6 8.994305474190861 20.991980584787083 2009-Apr-22 19:20:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200234 2009-Apr-22 19:20:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:20:45 LOG5 begin_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-22 19:20:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:20:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-22 19:20:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:20:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:20:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:20:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.508 (still bad) 2009-Apr-22 19:20:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-22 19:20:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84046.00 2009-Apr-22 19:20:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:20:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:20:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:20:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:20:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:20:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:20:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:20:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:20:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:20:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.422 (still bad) 2009-Apr-22 19:20:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-22 19:20:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:20:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:20:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:20:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:20:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:20:56 LOG5 end_task: Level: (4) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-22 19:20:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:20:56 LOG5 end_task: Level: (3) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-22 19:20:56 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-22 19:20:56 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-22 19:20:56 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-22 19:20:56 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:20:56 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:20:56 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:20:56 LOG2 antvel: Parameters to Doppler: Topocentric 84056 2009 112 0.0 2009-Apr-22 19:20:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:20:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-22 19:20:56 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-22 19:20:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:20:56 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:20:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-22 19:20:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:20:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-22 19:20:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:20:56 LOG5 begin_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-22 19:20:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-22 19:20:56 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.974910 2009.3088465536034 18.999826 2009-Apr-22 19:20:56 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999940 21.048333333333332 2009-Apr-22 19:20:56 LOG4 log_alfabeam: ALFABEAM 1 8.999842608992713 20.942260899890840 2009-Apr-22 19:20:56 LOG4 log_alfabeam: ALFABEAM 2 9.005533301763222 20.997574534767637 2009-Apr-22 19:20:56 LOG4 log_alfabeam: ALFABEAM 3 9.005856622150411 21.103647079737677 2009-Apr-22 19:20:56 LOG4 log_alfabeam: ALFABEAM 4 9.000061130642898 21.154536238016874 2009-Apr-22 19:20:56 LOG4 log_alfabeam: ALFABEAM 5 8.994271642472340 21.096727818463687 2009-Apr-22 19:20:56 LOG4 log_alfabeam: ALFABEAM 6 8.994376335484011 20.990606250414022 2009-Apr-22 19:20:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200235 2009-Apr-22 19:20:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:20:57 LOG5 begin_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-22 19:20:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:20:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-22 19:20:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:20:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:20:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:20:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-22 19:20:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:20:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84058.00 2009-Apr-22 19:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:20:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-22 19:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.096 (still bad) 2009-Apr-22 19:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-22 19:21:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:21:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.038 1.062 1.009 1.004 2009-Apr-22 19:21:05 LOG4 check_wapp_levels: WAPP-2 power levels: 0.957 0.915 1.042 1.051 2009-Apr-22 19:21:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.036 1.092 1.014 1.090 2009-Apr-22 19:21:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.099 0.940 0.123 2009-Apr-22 19:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.094 (still bad) 2009-Apr-22 19:21:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:21:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:21:08 LOG5 end_task: Level: (4) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-22 19:21:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:21:08 LOG5 end_task: Level: (3) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-22 19:21:08 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-22 19:21:08 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-22 19:21:08 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-22 19:21:08 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:21:08 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:21:08 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:21:08 LOG2 antvel: Parameters to Doppler: Topocentric 84068 2009 112 0.0 2009-Apr-22 19:21:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:21:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-22 19:21:08 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-22 19:21:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:21:08 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:21:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-22 19:21:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:21:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-22 19:21:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:21:08 LOG5 begin_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-22 19:21:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-22 19:21:08 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.978252 2009.3088469338607 18.999933 2009-Apr-22 19:21:08 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999956 21.048333333333343 2009-Apr-22 19:21:08 LOG4 log_alfabeam: ALFABEAM 1 8.999974214026075 20.942238770582001 2009-Apr-22 19:21:08 LOG4 log_alfabeam: ALFABEAM 2 9.005595261989445 20.998926368880142 2009-Apr-22 19:21:08 LOG4 log_alfabeam: ALFABEAM 3 9.005787336708213 21.105061444227697 2009-Apr-22 19:21:08 LOG4 log_alfabeam: ALFABEAM 4 8.999928904111290 21.154535196763756 2009-Apr-22 19:21:08 LOG4 log_alfabeam: ALFABEAM 5 8.994212102772405 21.095321806954228 2009-Apr-22 19:21:08 LOG4 log_alfabeam: ALFABEAM 6 8.994449270714746 20.989242115703412 2009-Apr-22 19:21:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200236 2009-Apr-22 19:21:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:21:09 LOG5 begin_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-22 19:21:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:21:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-22 19:21:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:21:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:21:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:21:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-22 19:21:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84070.00 2009-Apr-22 19:21:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-22 19:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:21:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:21:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-22 19:21:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.093 (still bad) 2009-Apr-22 19:21:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-22 19:21:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-22 19:21:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-22 19:21:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:21:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:21:20 LOG5 end_task: Level: (4) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-22 19:21:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:21:20 LOG5 end_task: Level: (3) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-22 19:21:20 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-22 19:21:20 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-22 19:21:20 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-22 19:21:20 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:21:20 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:21:20 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:21:20 LOG2 antvel: Parameters to Doppler: Topocentric 84080 2009 112 0.0 2009-Apr-22 19:21:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:21:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-22 19:21:20 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-22 19:21:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:21:20 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:21:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-22 19:21:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:21:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-22 19:21:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:21:20 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-22 19:21:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-22 19:21:20 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.981595 2009.3088473141177 18.999933 2009-Apr-22 19:21:20 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999911 21.048333333333339 2009-Apr-22 19:21:20 LOG4 log_alfabeam: ALFABEAM 1 9.000106629232160 20.942248814238027 2009-Apr-22 19:21:20 LOG4 log_alfabeam: ALFABEAM 2 9.005655924165181 21.000301654031691 2009-Apr-22 19:21:20 LOG4 log_alfabeam: ALFABEAM 3 9.005715841198986 21.106467517445644 2009-Apr-22 19:21:20 LOG4 log_alfabeam: ALFABEAM 4 8.999795920771316 21.154501600951995 2009-Apr-22 19:21:20 LOG4 log_alfabeam: ALFABEAM 5 8.994154011815544 21.093893214168585 2009-Apr-22 19:21:20 LOG4 log_alfabeam: ALFABEAM 6 8.994524308071153 20.987888312690053 2009-Apr-22 19:21:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200237 2009-Apr-22 19:21:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:21:21 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-22 19:21:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:21:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-22 19:21:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:21:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:21:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:21:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-22 19:21:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84082.00 2009-Apr-22 19:21:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-22 19:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:21:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:21:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:21:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.088 (still bad) 2009-Apr-22 19:21:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:21:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:21:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:21:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:21:32 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-22 19:21:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:21:32 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-22 19:21:32 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-22 19:21:32 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-22 19:21:32 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-22 19:21:32 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:21:32 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:21:32 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:21:32 LOG2 antvel: Parameters to Doppler: Topocentric 84092 2009 112 0.0 2009-Apr-22 19:21:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:21:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-22 19:21:32 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-22 19:21:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:21:32 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:21:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-22 19:21:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:21:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-22 19:21:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:21:32 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-22 19:21:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-22 19:21:32 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.984937 2009.3088476943747 18.999933 2009-Apr-22 19:21:32 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999973 21.048333333333343 2009-Apr-22 19:21:32 LOG4 log_alfabeam: ALFABEAM 1 9.000239650019143 20.942291532976625 2009-Apr-22 19:21:32 LOG4 log_alfabeam: ALFABEAM 2 9.005715165354838 21.001698476802964 2009-Apr-22 19:21:32 LOG4 log_alfabeam: ALFABEAM 3 9.005642215668447 21.107862784575875 2009-Apr-22 19:21:32 LOG4 log_alfabeam: ALFABEAM 4 8.999662388416850 21.154435000289354 2009-Apr-22 19:21:32 LOG4 log_alfabeam: ALFABEAM 5 8.994097487903808 21.092444104576447 2009-Apr-22 19:21:32 LOG4 log_alfabeam: ALFABEAM 6 8.994601356816897 20.986547254721831 2009-Apr-22 19:21:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200238 2009-Apr-22 19:21:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:21:33 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-22 19:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:21:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:21:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-22 19:21:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:21:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:21:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:21:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-22 19:21:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84094.00 2009-Apr-22 19:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:21:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:21:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:21:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.075 (still bad) 2009-Apr-22 19:21:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.075 (still bad) 2009-Apr-22 19:21:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.073 (still bad) 2009-Apr-22 19:21:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.075 (still bad) 2009-Apr-22 19:21:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:21:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:21:44 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-22 19:21:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:21:44 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-22 19:21:44 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-22 19:21:44 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-22 19:21:44 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-22 19:21:44 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:21:44 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:21:44 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:21:44 LOG2 antvel: Parameters to Doppler: Topocentric 84104 2009 112 0.0 2009-Apr-22 19:21:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:21:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-22 19:21:44 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-22 19:21:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:21:44 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:21:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-22 19:21:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:21:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-22 19:21:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:21:44 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-22 19:21:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-22 19:21:44 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.988280 2009.3088480746317 18.999933 2009-Apr-22 19:21:44 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999899 21.048333333333343 2009-Apr-22 19:21:44 LOG4 log_alfabeam: ALFABEAM 1 9.000373238821647 20.942367387287376 2009-Apr-22 19:21:44 LOG4 log_alfabeam: ALFABEAM 2 9.005772943502627 21.003116680258206 2009-Apr-22 19:21:44 LOG4 log_alfabeam: ALFABEAM 3 9.005566453899499 21.109246580833513 2009-Apr-22 19:21:44 LOG4 log_alfabeam: ALFABEAM 4 8.999528346075696 21.154334959881030 2009-Apr-22 19:21:44 LOG4 log_alfabeam: ALFABEAM 5 8.994042571734633 21.090974716097197 2009-Apr-22 19:21:44 LOG4 log_alfabeam: ALFABEAM 6 8.994680417124957 20.985219565549453 2009-Apr-22 19:21:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200239 2009-Apr-22 19:21:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:21:45 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-22 19:21:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:21:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-22 19:21:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:21:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:21:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:21:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.076 (still bad) 2009-Apr-22 19:21:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-22 19:21:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84106.00 2009-Apr-22 19:21:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:21:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:21:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:21:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:21:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:21:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:21:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:21:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:21:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:21:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.076 (still bad) 2009-Apr-22 19:21:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.075 (still bad) 2009-Apr-22 19:21:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.076 (still bad) 2009-Apr-22 19:21:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.073 (still bad) 2009-Apr-22 19:21:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.073 (still bad) 2009-Apr-22 19:21:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:21:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:21:56 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-22 19:21:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:21:56 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-22 19:21:56 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-22 19:21:56 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-22 19:21:56 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-22 19:21:56 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:21:56 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:21:56 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:21:56 LOG2 antvel: Parameters to Doppler: Topocentric 84116 2009 112 0.0 2009-Apr-22 19:21:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:21:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-22 19:21:56 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-22 19:21:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:21:56 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:21:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-22 19:21:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:21:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-22 19:21:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:21:56 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-22 19:21:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-22 19:21:56 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.991622 2009.3088484548889 18.999933 2009-Apr-22 19:21:56 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999689 21.048333333333339 2009-Apr-22 19:21:56 LOG4 log_alfabeam: ALFABEAM 1 9.000507195514468 20.942476681567328 2009-Apr-22 19:21:56 LOG4 log_alfabeam: ALFABEAM 2 9.005829149502391 21.004554351946886 2009-Apr-22 19:21:56 LOG4 log_alfabeam: ALFABEAM 3 9.005488645424872 21.110616590265128 2009-Apr-22 19:21:56 LOG4 log_alfabeam: ALFABEAM 4 8.999393995725031 21.154201231499645 2009-Apr-22 19:21:56 LOG4 log_alfabeam: ALFABEAM 5 8.993989367125101 21.089487101852438 2009-Apr-22 19:21:56 LOG4 log_alfabeam: ALFABEAM 6 8.994761389726051 20.983907445736801 2009-Apr-22 19:21:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200240 2009-Apr-22 19:21:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:21:57 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-22 19:21:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:21:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-22 19:21:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:21:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:21:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:21:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-22 19:21:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.075 (still bad) 2009-Apr-22 19:21:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84118.00 2009-Apr-22 19:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:21:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.075 (still bad) 2009-Apr-22 19:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.074 (still bad) 2009-Apr-22 19:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.075 (still bad) 2009-Apr-22 19:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.073 (still bad) 2009-Apr-22 19:22:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:22:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 1.037 0.974 0.980 2009-Apr-22 19:22:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.896 0.993 1.039 2009-Apr-22 19:22:07 LOG4 check_wapp_levels: WAPP-3 power levels: 0.995 1.073 0.950 1.065 2009-Apr-22 19:22:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.047 0.099 0.921 0.122 2009-Apr-22 19:22:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:22:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:22:08 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-22 19:22:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:22:08 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-22 19:22:08 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-22 19:22:08 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-22 19:22:08 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-22 19:22:08 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 19:22:08 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-22 19:22:08 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 19:22:08 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-22 19:22:08 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 19:22:08 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-22 19:22:08 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-22 19:22:08 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-22 19:22:08 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-22 19:22:08 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-22 19:22:08 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:22:08 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:22:08 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:22:08 LOG2 antvel: Parameters to Doppler: Topocentric 84128 2009 112 0.0 2009-Apr-22 19:22:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:22:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-22 19:22:08 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-22 19:22:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:22:08 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:22:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-22 19:22:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:22:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-22 19:22:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:22:08 LOG5 begin_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-22 19:22:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-22 19:22:08 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.994965 2009.3088488351459 18.999933 2009-Apr-22 19:22:08 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999753 21.048333333333339 2009-Apr-22 19:22:08 LOG4 log_alfabeam: ALFABEAM 1 9.000641477439315 20.942619742677824 2009-Apr-22 19:22:08 LOG4 log_alfabeam: ALFABEAM 2 9.005883745778416 21.006011219774653 2009-Apr-22 19:22:08 LOG4 log_alfabeam: ALFABEAM 3 9.005408794213718 21.111972162560615 2009-Apr-22 19:22:08 LOG4 log_alfabeam: ALFABEAM 4 8.999259381169571 21.154033516984985 2009-Apr-22 19:22:08 LOG4 log_alfabeam: ALFABEAM 5 8.993937909287096 21.087981611224336 2009-Apr-22 19:22:08 LOG4 log_alfabeam: ALFABEAM 6 8.994844265162161 20.982611490341082 2009-Apr-22 19:22:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200241 2009-Apr-22 19:22:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:22:09 LOG5 begin_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-22 19:22:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-22 19:22:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:22:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:22:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:22:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:22:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-22 19:22:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84130.00 2009-Apr-22 19:22:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.073 (still bad) 2009-Apr-22 19:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:22:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:22:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.533 (still bad) 2009-Apr-22 19:22:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.540 (still bad) 2009-Apr-22 19:22:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.531 (still bad) 2009-Apr-22 19:22:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.532 (still bad) 2009-Apr-22 19:22:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.536 (still bad) 2009-Apr-22 19:22:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:22:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:22:20 LOG5 end_task: Level: (4) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-22 19:22:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:22:20 LOG5 end_task: Level: (3) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-22 19:22:20 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-22 19:22:20 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-22 19:22:20 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-22 19:22:20 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:22:20 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:22:20 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:22:20 LOG2 antvel: Parameters to Doppler: Topocentric 84140 2009 112 0.0 2009-Apr-22 19:22:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:22:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-22 19:22:20 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-22 19:22:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:22:20 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:22:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-22 19:22:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:22:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-22 19:22:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:22:20 LOG5 begin_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-22 19:22:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-22 19:22:20 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 8.998307 2009.3088492154029 18.999933 2009-Apr-22 19:22:20 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999718 21.048333333333339 2009-Apr-22 19:22:20 LOG4 log_alfabeam: ALFABEAM 1 9.000775879451595 20.942796655115202 2009-Apr-22 19:22:20 LOG4 log_alfabeam: ALFABEAM 2 9.005936632240269 21.007485216225479 2009-Apr-22 19:22:20 LOG4 log_alfabeam: ALFABEAM 3 9.005327004732733 21.113311042997257 2009-Apr-22 19:22:20 LOG4 log_alfabeam: ALFABEAM 4 8.999124708920862 21.153831791258252 2009-Apr-22 19:22:20 LOG4 log_alfabeam: ALFABEAM 5 8.993888291704016 21.086460444308869 2009-Apr-22 19:22:20 LOG4 log_alfabeam: ALFABEAM 6 8.994928930212227 20.981333820940780 2009-Apr-22 19:22:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200242 2009-Apr-22 19:22:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:22:21 LOG5 begin_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-22 19:22:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:22:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-22 19:22:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:22:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:22:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:22:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-22 19:22:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84142.00 2009-Apr-22 19:22:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.535 (still bad) 2009-Apr-22 19:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:22:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.534 (still bad) 2009-Apr-22 19:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.537 (still bad) 2009-Apr-22 19:22:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.534 (still bad) 2009-Apr-22 19:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.535 (still bad) 2009-Apr-22 19:22:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:22:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:22:32 LOG5 end_task: Level: (4) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-22 19:22:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:22:32 LOG5 end_task: Level: (3) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-22 19:22:32 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-22 19:22:32 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-22 19:22:32 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-22 19:22:32 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:22:32 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:22:32 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:22:32 LOG2 antvel: Parameters to Doppler: Topocentric 84152 2009 112 0.0 2009-Apr-22 19:22:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:22:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-22 19:22:32 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-22 19:22:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:22:32 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:22:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-22 19:22:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:22:32 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-22 19:22:32 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:22:32 LOG5 begin_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-22 19:22:32 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-22 19:22:32 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 9.001649 2009.3088495956599 18.999933 2009-Apr-22 19:22:32 LOG4 log_alfabeam: ALFABEAM 0 8.999999999999579 21.048333333333339 2009-Apr-22 19:22:32 LOG4 log_alfabeam: ALFABEAM 1 9.000910315434979 20.943007533243573 2009-Apr-22 19:22:32 LOG4 log_alfabeam: ALFABEAM 2 9.005987762191049 21.008975519497167 2009-Apr-22 19:22:32 LOG4 log_alfabeam: ALFABEAM 3 9.005243316082170 21.114632229166304 2009-Apr-22 19:22:32 LOG4 log_alfabeam: ALFABEAM 4 8.998990065931114 21.153595978368340 2009-Apr-22 19:22:32 LOG4 log_alfabeam: ALFABEAM 5 8.993840556721189 21.084924507277584 2009-Apr-22 19:22:32 LOG4 log_alfabeam: ALFABEAM 6 8.995015340242535 20.980075352961155 2009-Apr-22 19:22:32 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200243 2009-Apr-22 19:22:33 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:22:33 LOG5 begin_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-22 19:22:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.536 (still bad) 2009-Apr-22 19:22:33 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:22:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-22 19:22:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:22:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:22:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:22:33 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-22 19:22:33 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84154.00 2009-Apr-22 19:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:22:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.529 (still bad) 2009-Apr-22 19:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:22:35 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:22:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.536 (still bad) 2009-Apr-22 19:22:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.534 (still bad) 2009-Apr-22 19:22:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.533 (still bad) 2009-Apr-22 19:22:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.536 (still bad) 2009-Apr-22 19:22:44 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:22:44 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:22:44 LOG5 end_task: Level: (4) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-22 19:22:44 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:22:44 LOG5 end_task: Level: (3) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-22 19:22:44 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-22 19:22:44 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-22 19:22:44 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-22 19:22:44 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:22:44 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:22:44 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:22:44 LOG2 antvel: Parameters to Doppler: Topocentric 84164 2009 112 0.0 2009-Apr-22 19:22:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:22:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-22 19:22:44 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-22 19:22:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:22:44 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:22:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-22 19:22:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:22:44 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-22 19:22:44 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:22:44 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-22 19:22:44 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-22 19:22:44 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 9.004992 2009.3088499759169 18.999933 2009-Apr-22 19:22:44 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000126 21.048333333333339 2009-Apr-22 19:22:44 LOG4 log_alfabeam: ALFABEAM 1 9.001044698424915 20.943252437140551 2009-Apr-22 19:22:44 LOG4 log_alfabeam: ALFABEAM 2 9.006037091320499 21.010481273250356 2009-Apr-22 19:22:44 LOG4 log_alfabeam: ALFABEAM 3 9.005157770877135 21.115934737831832 2009-Apr-22 19:22:44 LOG4 log_alfabeam: ALFABEAM 4 8.998855539844959 21.153326057330368 2009-Apr-22 19:22:44 LOG4 log_alfabeam: ALFABEAM 5 8.993794743930696 21.083374737654733 2009-Apr-22 19:22:44 LOG4 log_alfabeam: ALFABEAM 6 8.995103447457282 20.978836977919229 2009-Apr-22 19:22:44 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200244 2009-Apr-22 19:22:45 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:22:45 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-22 19:22:45 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:22:45 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-22 19:22:45 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:22:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:22:45 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:22:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.535 (still bad) 2009-Apr-22 19:22:45 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-22 19:22:45 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84166.00 2009-Apr-22 19:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:22:47 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.529 (still bad) 2009-Apr-22 19:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.530 (still bad) 2009-Apr-22 19:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.526 (still bad) 2009-Apr-22 19:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.521 (still bad) 2009-Apr-22 19:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.526 (still bad) 2009-Apr-22 19:22:56 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:22:56 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:22:56 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-22 19:22:56 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:22:56 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-22 19:22:56 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-22 19:22:56 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-22 19:22:56 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-22 19:22:56 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:22:56 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:22:56 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:22:56 LOG2 antvel: Parameters to Doppler: Topocentric 84176 2009 112 0.0 2009-Apr-22 19:22:56 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:22:56 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-22 19:22:56 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-22 19:22:56 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:22:56 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:22:56 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-22 19:22:56 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:22:56 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-22 19:22:56 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:22:56 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-22 19:22:56 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-22 19:22:56 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 9.008334 2009.3088503561742 18.999933 2009-Apr-22 19:22:56 LOG4 log_alfabeam: ALFABEAM 0 8.999999999996085 21.048333333333296 2009-Apr-22 19:22:56 LOG4 log_alfabeam: ALFABEAM 1 9.001178820561782 20.943531106374554 2009-Apr-22 19:22:56 LOG4 log_alfabeam: ALFABEAM 2 9.006084536117168 21.012000219092229 2009-Apr-22 19:22:56 LOG4 log_alfabeam: ALFABEAM 3 9.005070494292847 21.117216466796133 2009-Apr-22 19:22:56 LOG4 log_alfabeam: ALFABEAM 4 8.998721339075958 21.153022350675077 2009-Apr-22 19:22:56 LOG4 log_alfabeam: ALFABEAM 5 8.993750928450890 21.081813508629704 2009-Apr-22 19:22:56 LOG4 log_alfabeam: ALFABEAM 6 8.995193119778408 20.977620642623755 2009-Apr-22 19:22:56 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200245 2009-Apr-22 19:22:57 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:22:57 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-22 19:22:57 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:22:57 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-22 19:22:57 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:22:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:22:57 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:22:57 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-22 19:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.527 (still bad) 2009-Apr-22 19:22:57 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84178.00 2009-Apr-22 19:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:22:59 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.510 (still bad) 2009-Apr-22 19:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.510 (still bad) 2009-Apr-22 19:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.512 (still bad) 2009-Apr-22 19:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.511 (still bad) 2009-Apr-22 19:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.517 (still bad) 2009-Apr-22 19:23:08 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:23:08 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:23:08 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-22 19:23:08 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:23:08 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-22 19:23:08 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-22 19:23:08 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-22 19:23:08 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-22 19:23:08 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:23:08 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:23:08 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:23:08 LOG2 antvel: Parameters to Doppler: Topocentric 84188 2009 112 0.0 2009-Apr-22 19:23:08 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:23:08 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-22 19:23:08 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-22 19:23:08 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:23:08 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:23:08 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-22 19:23:08 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:23:08 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-22 19:23:08 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:23:08 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-22 19:23:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-22 19:23:08 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 9.011677 2009.3088507364312 18.999933 2009-Apr-22 19:23:08 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000227 21.048333333333332 2009-Apr-22 19:23:08 LOG4 log_alfabeam: ALFABEAM 1 9.001312634912560 20.943843498057923 2009-Apr-22 19:23:08 LOG4 log_alfabeam: ALFABEAM 2 9.006130076059463 21.013531865655487 2009-Apr-22 19:23:08 LOG4 log_alfabeam: ALFABEAM 3 9.004981513335846 21.118476913503379 2009-Apr-22 19:23:08 LOG4 log_alfabeam: ALFABEAM 4 8.998587510761631 21.152684933702179 2009-Apr-22 19:23:08 LOG4 log_alfabeam: ALFABEAM 5 8.993709126258652 21.080241368516582 2009-Apr-22 19:23:08 LOG4 log_alfabeam: ALFABEAM 6 8.995284326910546 20.976426766512130 2009-Apr-22 19:23:08 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200246 2009-Apr-22 19:23:09 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:23:09 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-22 19:23:09 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:23:09 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-22 19:23:09 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:23:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:23:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:23:09 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-22 19:23:09 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84190.00 2009-Apr-22 19:23:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:23:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.404 1.423 1.346 1.354 2009-Apr-22 19:23:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.319 1.261 1.396 1.443 2009-Apr-22 19:23:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.409 1.512 1.352 1.438 2009-Apr-22 19:23:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.497 0.099 1.318 0.122 2009-Apr-22 19:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:23:11 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:23:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.508 (still bad) 2009-Apr-22 19:23:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.510 (still bad) 2009-Apr-22 19:23:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.506 (still bad) 2009-Apr-22 19:23:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.507 (still bad) 2009-Apr-22 19:23:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.506 (still bad) 2009-Apr-22 19:23:20 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:23:20 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:23:20 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-22 19:23:20 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:23:20 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-22 19:23:20 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-22 19:23:20 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-22 19:23:20 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-22 19:23:20 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:23:20 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:23:20 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:23:20 LOG2 antvel: Parameters to Doppler: Topocentric 84200 2009 112 0.0 2009-Apr-22 19:23:20 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:23:20 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-22 19:23:20 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-22 19:23:20 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:23:20 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:23:20 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-22 19:23:20 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:23:20 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-22 19:23:20 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-22 19:23:20 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-22 19:23:20 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-22 19:23:20 LOG5 log_alfabeam: Parameters: 9.0 21.048333333333336 9.015019 2009.3088511166882 18.999933 2009-Apr-22 19:23:20 LOG4 log_alfabeam: ALFABEAM 0 9.000000000000657 21.048333333333346 2009-Apr-22 19:23:20 LOG4 log_alfabeam: ALFABEAM 1 9.001445935170997 20.944189120822422 2009-Apr-22 19:23:20 LOG4 log_alfabeam: ALFABEAM 2 9.006173640302503 21.015073861008290 2009-Apr-22 19:23:20 LOG4 log_alfabeam: ALFABEAM 3 9.004890965268944 21.119714114854837 2009-Apr-22 19:23:20 LOG4 log_alfabeam: ALFABEAM 4 8.998454261186644 21.152314360073120 2009-Apr-22 19:23:20 LOG4 log_alfabeam: ALFABEAM 5 8.993669398780959 21.078660768913512 2009-Apr-22 19:23:20 LOG4 log_alfabeam: ALFABEAM 6 8.995376926141775 20.975257146226330 2009-Apr-22 19:23:20 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911200247 2009-Apr-22 19:23:21 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-22 19:23:21 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-22 19:23:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:23:21 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-22 19:23:21 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:23:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:23:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:23:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-22 19:23:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84202.00 2009-Apr-22 19:23:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.504 (still bad) 2009-Apr-22 19:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:23:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.506 (still bad) 2009-Apr-22 19:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.508 (still bad) 2009-Apr-22 19:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.507 (still bad) 2009-Apr-22 19:23:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.507 (still bad) 2009-Apr-22 19:23:32 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.507 (still bad) 2009-Apr-22 19:23:32 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-22 19:23:32 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-22 19:23:32 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-22 19:23:32 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-22 19:23:32 INFO2 smartfreq: Switching off CAL 2009-Apr-22 19:23:32 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-22 19:23:32 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-22 19:23:32 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 19:23:32 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-22 19:23:32 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 19:23:32 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-22 19:23:32 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 19:23:32 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-22 19:23:32 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-22 19:23:32 INFO3 restore_frequencies: Restoring original frequencies 2009-Apr-22 19:23:32 LOG5 antvel: Calling 'antvel 90000.000000 210254.000000 J Topocentric 0' 2009-Apr-22 19:23:32 LOG2 antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:23:32 LOG2 antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:23:32 LOG2 antvel: Parameters to Doppler: Topocentric 84212 2009 112 0.0 2009-Apr-22 19:23:32 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:23:32 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-22 19:23:32 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-22 19:23:32 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:23:32 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:23:32 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-22 19:23:32 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:23:32 STOP finish_task: Finishing task 'smart frequency switching' 2009-Apr-22 19:23:32 LOG5 finish_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-22 19:23:32 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Apr-22 19:23:32 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-22 19:23:32 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Apr-22 19:23:32 LOG5 end_task: Level: (2) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-22 19:23:32 NOTE run_command_file: DONE with command file processing 2009-Apr-22 19:23:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-22 19:23:33 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-22 19:23:33 LOG5 finish_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-22 19:23:33 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Apr-22 19:23:33 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-22 19:23:33 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Apr-22 19:23:33 LOG5 end_task: Level: (1) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-22 19:23:33 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-22 19:23:33 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:23:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:23:33 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.510 (still bad) 2009-Apr-22 19:23:39 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-22 19:23:39 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-22 19:23:39 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-22 19:23:39 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-22 19:23:39 LOG5 begin_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-22 19:23:39 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-22 19:23:39 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-22 19:23:39 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-22 19:23:39 LOG5 end_task: Level: (1) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-22 19:23:39 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-22 19:23:39 LOG3 exec_msg: Closing socket 2009-Apr-22 19:23:39 LOG3 exec_msg: Closing socket 2009-Apr-22 19:23:39 LOG3 exec_msg: Closing socket 2009-Apr-22 19:23:40 LOG3 exec_msg: Closing socket 2009-Apr-22 19:23:42 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-22 19:23:42 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-22 19:23:42 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-22 19:23:42 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-22 19:23:49 LOG4 exec_msg: From WAPPWATCH4: log_message ERROR {WAPP4-wapp_watch} {ERROR WAPP-program 'wappsnap' has died!} 2009-Apr-22 19:23:49 ERROR WAPP4-wapp_watch: ERROR WAPP-program 'wappsnap' has died! 2009-Apr-22 19:23:49 LOG4 exec_msg: From WAPPWATCH4: wapp_failure 4 2009-Apr-22 19:23:49 LOG5 wapp_failure: Calling 'wapp_failure 4' 2009-Apr-22 19:23:49 ERROR wapp_failure: ERROR WAPP-4 has failed! 2009-Apr-22 19:23:49 LOG3 handle_wapp_failure: Calling 'handle_wapp_failure 4 crash' 2009-Apr-22 19:23:49 BEGIN begin_task: Starting task 'handling WAPP failure' 2009-Apr-22 19:23:50 LOG5 begin_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-22 19:23:50 ALERT handle_wapp_failure: Restarting WAPP-4! 2009-Apr-22 19:23:50 NOTE handle_wapp_failure: Stand by for automatic WAPP-4 reconfiguration in 6 seconds! 2009-Apr-22 19:23:50 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2009-Apr-22 19:23:50 LOG5 end_task: Level: (1) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-22 19:23:50 LOG3 exec_msg: Closing socket 2009-Apr-22 19:23:52 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-22 19:23:56 LOG5 wapp_restart: Calling 'wapp_restart 4' 2009-Apr-22 19:23:56 BEGIN begin_task: Starting task 'handling WAPP failure' 2009-Apr-22 19:23:56 LOG5 begin_task: Level: (1) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-22 19:23:56 ALERT wapp_restart: Sending configuration information to WAPP-4 2009-Apr-22 19:23:56 LOG3 sock_errsend: To WAPPCON4: TIMEOUT 5 2009-Apr-22 19:23:56 LOG3 sock_errsend: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-22 19:23:56 INFO1 wapp_restart: Configuration information sent to WAPP-4 2009-Apr-22 19:23:56 NOTE wapp_restart: WAPP-4 should be ready now 2009-Apr-22 19:23:56 END end_task: Finishing task 'handling WAPP failure' with status 'OK' 2009-Apr-22 19:23:56 LOG5 end_task: Level: (1) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-22 19:23:56 LOG4 WAPP=4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-22 19:23:56 LOG4 WAPP=4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-22 19:24:12 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-22 19:24:12 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-22 19:24:12 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-22 19:24:12 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-22 19:24:12 LOG5 begin_task: Level: (1) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-22 19:24:12 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-22 19:24:12 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-22 19:24:12 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-22 19:24:12 LOG5 end_task: Level: (1) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-22 19:24:12 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-22 19:24:12 LOG3 exec_msg: Closing socket 2009-Apr-22 19:24:12 LOG3 exec_msg: Closing socket 2009-Apr-22 19:24:12 LOG3 exec_msg: Closing socket 2009-Apr-22 19:24:12 LOG3 exec_msg: Closing socket 2009-Apr-22 19:24:15 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-22 19:24:15 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-22 19:24:15 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-22 19:24:15 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-22 19:24:26 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Apr-22 19:24:26 LOG2 CIMA-antvel: Precessing RA = 09:00:00.0 Dec = +21:02:54.0 Epoch = 2009.30885 J 2009-Apr-22 19:24:26 LOG2 CIMA-antvel: Computed apparent RA = 09:00:33.2 Dec = +21:00:42.7 2009-Apr-22 19:24:26 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 84266 2009 112 0.0 2009-Apr-22 19:24:26 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-22 19:24:27 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-22 19:24:28 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Apr-22 19:24:28 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Apr-22 19:24:28 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-22 19:24:28 LOG5 begin_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-22 19:24:28 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-22 19:24:28 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-22 19:24:28 LOG1 config_iflo: Receiver ALFA already selected 2009-Apr-22 19:24:28 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-22 19:24:28 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-22 19:24:28 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-22 19:24:28 LOG5 begin_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-22 19:24:28 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-22 19:24:28 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-22 19:24:28 LOG5 end_task: Level: (2) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-22 19:24:28 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-22 19:24:28 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-22 19:24:28 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Apr-22 19:24:28 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Apr-22 19:24:28 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-22 19:24:28 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-22 19:24:28 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Apr-22 19:24:28 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Apr-22 19:24:28 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Apr-22 19:24:28 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-22 19:24:28 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Apr-22 19:24:28 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Apr-22 19:24:28 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-22 19:24:28 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-22 19:24:28 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-22 19:24:28 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-22 19:24:28 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-22 19:24:28 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Apr-22 19:24:28 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Apr-22 19:24:28 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Apr-22 19:24:28 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Apr-22 19:24:28 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-22 19:24:28 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Apr-22 19:24:28 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Apr-22 19:24:28 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-22 19:24:28 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:24:28 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Apr-22 19:24:28 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Apr-22 19:24:28 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-22 19:24:28 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Apr-22 19:24:28 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Apr-22 19:24:28 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-22 19:24:28 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:24:28 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-22 19:24:28 LOG5 begin_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-22 19:24:28 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-22 19:24:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-22 19:24:28 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:24:28 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:24:28 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:24:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:24:29 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Apr-22 19:24:29 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-22 19:24:29 LOG5 end_task: Level: (2) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-22 19:24:29 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-22 19:24:29 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-22 19:24:29 LOG5 finish_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-22 19:24:29 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-22 19:24:29 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-22 19:24:29 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-22 19:24:29 LOG5 end_task: Level: (1) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-22 19:24:29 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:24:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-22 19:24:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-22 19:24:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-22 19:24:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-22 19:24:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-22 19:24:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-22 19:24:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-22 19:24:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-22 19:24:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-22 19:24:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-22 19:24:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-22 19:24:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-22 19:24:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-22 19:24:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-22 19:24:29 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-22 19:24:29 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-22 19:24:29 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-22 19:24:29 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-22 19:24:29 LOG5 begin_task: Level: (1) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-22 19:24:29 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-22 19:24:29 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-22 19:24:29 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-22 19:24:29 START begin_task: Starting task 'selecting calibration port' 2009-Apr-22 19:24:29 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-22 19:24:29 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-22 19:24:29 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-22 19:24:29 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:24:29 START begin_task: Starting task 'waiting on calport' 2009-Apr-22 19:24:29 LOG5 begin_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-22 19:24:29 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Apr-22 19:24:29 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-22 19:24:29 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:24:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:24:30 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-22 19:24:30 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-22 19:24:30 LOG5 end_task: Level: (3) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-22 19:24:30 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-22 19:24:30 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-22 19:24:30 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-22 19:24:30 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-22 19:24:30 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-22 19:24:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 19:24:30 LOG5 begin_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-22 19:24:30 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:24:30 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 19:24:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-22 19:24:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 19:24:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-22 19:24:30 LOG5 end_task: Level: (2) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-22 19:24:30 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-22 19:24:30 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-22 19:24:30 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-22 19:24:30 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-22 19:24:30 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-22 19:24:30 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-22 19:24:30 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-22 19:24:30 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-22 19:24:30 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-22 19:24:30 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-22 19:24:30 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-22 19:24:30 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-22 19:24:30 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-22 19:24:30 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-22 19:24:30 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 19:24:30 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-22 19:24:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-22 19:24:30 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 19:24:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-22 19:24:30 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-22 19:24:30 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-22 19:24:30 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 19:24:30 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-22 19:24:30 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-22 19:24:30 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-22 19:24:30 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-22 19:24:30 LOG5 finish_task: Level: (1) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-22 19:24:30 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-22 19:24:30 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-22 19:24:30 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-22 19:24:30 LOG5 end_task: Level: (1) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-22 19:24:30 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-22 19:24:30 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Apr-22 19:24:30 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Apr-22 19:24:30 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-22 19:24:30 LOG5 begin_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-22 19:24:30 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-22 19:24:31 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-22 19:24:31 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-22 19:24:31 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-22 19:24:31 LOG5 finish_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-22 19:24:31 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-22 19:24:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-22 19:24:31 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-22 19:24:31 LOG5 end_task: Level: (1) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-22 19:24:31 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Apr-22 19:24:31 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-22 19:24:31 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-22 19:24:48 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-22 19:24:48 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-22 19:24:48 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-22 19:24:48 LOG5 begin_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-22 19:24:48 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-22 19:24:48 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-22 19:24:48 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-22 19:24:48 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-22 19:24:48 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:24:48 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-22 19:24:48 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-22 19:24:48 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-22 19:24:48 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:24:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:24:51 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-22 19:24:51 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-22 19:24:51 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-22 19:24:51 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-22 19:24:51 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-22 19:24:51 LOG5 begin_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-22 19:24:51 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-22 19:24:51 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-22 19:24:51 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-22 19:24:51 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-22 19:24:51 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-22 19:24:51 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-22 19:24:51 LOG5 begin_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-22 19:24:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-22 19:24:51 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:24:52 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-22 19:24:52 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 2 dB 2009-Apr-22 19:24:52 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-22 19:24:52 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-22 19:24:52 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-22 19:24:52 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-22 19:24:52 LOG5 end_task: Level: (3) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-22 19:24:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.006 1.045 ALFA beam 1: 0.978 0.989 2009-Apr-22 19:24:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.942 0.905 ALFA beam 3: 0.987 1.023 2009-Apr-22 19:24:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 0.989 1.053 ALFA beam 5: 0.968 1.059 2009-Apr-22 19:24:52 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.029 0.096 ALFA beam 7: 0.912 0.119 2009-Apr-22 19:24:52 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-22 19:24:52 LOG5 finish_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-22 19:24:52 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-22 19:24:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-22 19:24:52 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-22 19:24:52 LOG5 end_task: Level: (2) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-22 19:24:52 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-22 19:24:52 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-22 19:24:52 LOG5 finish_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-22 19:24:52 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-22 19:24:52 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-22 19:24:52 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-22 19:24:52 LOG5 end_task: Level: (1) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-22 19:24:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.096 < 0.75)! 2009-Apr-22 19:24:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 1.045 0.978 0.989 2009-Apr-22 19:24:53 LOG4 check_wapp_levels: WAPP-2 power levels: 0.942 0.905 0.987 1.023 2009-Apr-22 19:24:53 LOG4 check_wapp_levels: WAPP-3 power levels: 0.989 1.053 0.968 1.059 2009-Apr-22 19:24:53 LOG4 check_wapp_levels: WAPP-4 power levels: 1.029 0.096 0.912 0.119 2009-Apr-22 19:25:01 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2009-Apr-22 19:25:01 LOG4 exec_msg: From OBSERVER: new_file manual 2009-Apr-22 19:25:01 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-22 19:25:01 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-22 19:25:01 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-22 19:25:01 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-22 19:25:01 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-22 19:25:02 NOTE WAPPDATA-new_file: New FITS file: wapp.20090422.a2010.0001.fits 2009-Apr-22 19:25:02 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090422.a2010.0001.fits} 2009-Apr-22 19:25:04 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-22 19:25:04 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift87p1 090300.0 +210254 J 0 Topocentric velocity(optical) 2009-Apr-22 19:25:04 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift87p1 090300.0 +210254 J 0 Topocentric velocity(optical)' 2009-Apr-22 19:25:04 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-22 19:25:04 LOG5 begin_task: Level: (1) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-22 19:25:04 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2009-Apr-22 19:25:04 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-22 19:25:04 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift87p1} 2009-Apr-22 19:25:04 INFO5 fixed_driftmap: Start: year = 2009.3088544122493 RA = 09:03:33.2 Dec = +21:00:40.9 2009-Apr-22 19:25:04 NOTE fixed_driftmap: Setting ZA to 2:39:27.2 ... 2009-Apr-22 19:25:04 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 2.66 2009-Apr-22 19:25:04 LOG3 track_source: Calling 'track_source drift87p1 180.0 2.6575564581 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-22 19:25:04 START begin_task: Starting task 'sending tracking commands' 2009-Apr-22 19:25:04 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-22 19:25:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift87p1} INFO {Slewing to source 'drift87p1' ...} 2009-Apr-22 19:25:04 INFO1 track_source: Starting to track drift87p1 2009-Apr-22 19:25:04 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift87p1" 2009-Apr-22 19:25:04 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-22 19:25:04 LOG3 vw_send: To DATATAKING: set dec 2.6575564581 2009-Apr-22 19:25:04 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-22 19:25:04 LOG3 vw_send: To DATATAKING: pnt tr 180.0 2.6575564581 -CF 2009-Apr-22 19:25:04 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-22 19:25:04 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-22 19:25:04 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-22 19:25:04 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-22 19:25:04 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-22 19:25:04 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-22 19:25:04 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-22 19:25:04 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-22 19:25:04 LOG5 begin_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-22 19:25:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-22 19:25:05 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-22 19:25:05 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-22 19:25:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-22 19:25:05 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-22 19:25:05 LOG5 begin_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-22 19:25:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift87p1" 2009-Apr-22 19:25:05 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-22 19:25:05 LOG4 got_cormsg: From DATATAKING: set dec 2.6575564581 2009-Apr-22 19:25:05 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-22 19:25:05 LOG4 got_cormsg: From DATATAKING: vw% 2.6575564581 2009-Apr-22 19:25:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:25:05 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-22 19:25:05 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 2.6575564581 -CF 2009-Apr-22 19:25:05 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-22 19:25:05 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-22 19:25:05 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:25:05 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-22 19:25:05 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-22 19:25:05 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-22 19:25:05 LOG5 end_task: Level: (3) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-22 19:25:05 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-22 19:25:05 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-22 19:25:05 LOG5 finish_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-22 19:25:05 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-22 19:25:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-22 19:25:06 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-22 19:25:06 LOG5 end_task: Level: (2) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-22 19:25:06 START begin_task: Starting task 'waiting on telescope' 2009-Apr-22 19:25:06 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-22 19:25:06 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-22 19:25:06 LOG3 waittrk: Start waittrk 5 2009-Apr-22 19:25:06 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-22 19:25:06 LOG5 begin_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-22 19:25:11 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-22 19:25:11 LOG5 end_task: Level: (3) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-22 19:25:11 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-22 19:25:11 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-22 19:25:43 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-22 19:25:43 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-22 19:25:43 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-22 19:25:43 INFO2 waittrk: Now tracking drift87p1 2009-Apr-22 19:25:43 LOG4 waittrk: Current telescope position: Az = 179.79 ZA = 2.67 2009-Apr-22 19:25:43 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-22 19:25:43 LOG5 finish_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-22 19:25:43 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-22 19:25:43 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-22 19:25:43 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-22 19:25:43 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-22 19:25:43 START begin_task: Starting task 'selecting calibration type' 2009-Apr-22 19:25:43 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-22 19:25:43 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-22 19:25:43 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-22 19:25:43 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:25:43 START begin_task: Starting task 'waiting on setcal' 2009-Apr-22 19:25:43 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-22 19:25:43 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-22 19:25:43 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:25:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:25:43 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-22 19:25:43 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-22 19:25:43 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-22 19:25:43 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-22 19:25:43 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-22 19:25:43 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-22 19:25:43 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-22 19:25:43 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-22 19:25:43 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:25:44 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-22 19:25:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-22 19:25:44 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-22 19:25:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-22 19:25:44 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-22 19:25:44 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-22 19:25:44 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-22 19:25:44 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-22 19:25:44 LOG5 begin_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-22 19:25:44 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-22 19:25:44 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-22 19:25:44 LOG5 end_task: Level: (3) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-22 19:25:44 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-22 19:25:44 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-22 19:25:44 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-22 19:25:44 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-22 19:25:44 LOG5 dopset_later: Calling 'dopset_later 15.682152937761748' 2009-Apr-22 19:25:44 INFO3 dopset_later: Setting Doppler correction for 19:25:59 (15.7 seconds from now) 2009-Apr-22 19:25:44 LOG5 antvel: Calling 'antvel 180.000000 2.657556 F Topocentric 15.682152937761748' 2009-Apr-22 19:25:44 LOG2 antvel: Transforming current Az = 180.00 ZA = 2.66 to apparent RA = 09:03:33.1 Dec = +21:00:40.9 2009-Apr-22 19:25:44 LOG2 antvel: Parameters to Doppler: Topocentric 84359 2009 112 0.0 2009-Apr-22 19:25:44 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-22 19:25:44 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-22 19:25:44 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-22 19:25:44 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-22 19:25:44 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-22 19:25:44 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-22 19:25:44 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:25:44 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-22 19:25:44 LOG5 begin_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-22 19:25:44 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-22 19:25:44 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-22 19:25:44 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-22 19:25:44 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-22 19:25:44 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:25:44 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-22 19:25:44 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-22 19:25:44 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-22 19:25:44 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-22 19:25:44 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-22 19:25:44 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:25:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:25:44 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:25:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:25:47 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-22 19:25:47 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-22 19:25:47 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-22 19:25:47 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-22 19:25:47 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-22 19:25:47 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-22 19:25:47 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-22 19:25:47 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-22 19:25:47 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-22 19:25:47 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-22 19:25:47 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-22 19:25:47 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-22 19:25:47 LOG5 begin_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-22 19:25:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:25:47 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-22 19:25:48 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 5 dB --- beam 1: 6 6 dB 2009-Apr-22 19:25:48 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 0 dB --- beam 5: 4 2 dB 2009-Apr-22 19:25:48 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 2 dB 2009-Apr-22 19:25:48 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 2 0 dB --- beam 7: 3 0 dB 2009-Apr-22 19:25:48 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-22 19:25:48 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-22 19:25:48 LOG5 end_task: Level: (4) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-22 19:25:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.011 1.045 ALFA beam 1: 0.984 0.993 2009-Apr-22 19:25:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.946 0.906 ALFA beam 3: 1.007 1.048 2009-Apr-22 19:25:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.004 1.081 ALFA beam 5: 0.970 1.075 2009-Apr-22 19:25:48 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 1.050 0.099 ALFA beam 7: 0.926 0.122 2009-Apr-22 19:25:48 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-22 19:25:48 LOG5 finish_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-22 19:25:48 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-22 19:25:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-22 19:25:48 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-22 19:25:48 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-22 19:25:48 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-22 19:25:48 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-22 19:25:48 LOG5 finish_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-22 19:25:48 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-22 19:25:48 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-22 19:25:48 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-22 19:25:48 LOG5 end_task: Level: (2) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-22 19:25:48 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:03:33.2 LST = 09:03:21.5 diff = 11.7 secs 2009-Apr-22 19:25:48 INFO2 fixed_driftmap: Waiting 9.7 seconds for RA 9:03:33 2009-Apr-22 19:25:48 INFO2 lstwait: Waiting for 9.7 secs from LST 09:03:21 to LST 09:03:31 ... 2009-Apr-22 19:25:48 LOG4 send_obs_status: To obs_status: <1> TASKTIME 9.6881637339236146 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Apr-22 19:25:48 START begin_task: Starting task 'waiting on wait on LST' 2009-Apr-22 19:25:48 LOG5 begin_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-22 19:25:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:25:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 1.045 0.984 0.993 2009-Apr-22 19:25:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.906 1.007 1.048 2009-Apr-22 19:25:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.004 1.081 0.970 1.075 2009-Apr-22 19:25:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.099 0.926 0.122 2009-Apr-22 19:25:58 STOP end_task: Finishing task 'waiting on wait on LST' with status 'OK' 2009-Apr-22 19:25:58 LOG5 end_task: Level: (2) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-22 19:25:58 LOG4 lstwait: Finished waiting 0.31 seconds late 2009-Apr-22 19:25:58 INFO3 lstwait: Finished waiting 2009-Apr-22 19:25:58 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-22 19:25:58 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-22 19:25:58 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-22 19:25:58 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-22 19:25:58 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-22 19:25:58 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090422.a2010.0001.fits' is empty! 2009-Apr-22 19:25:58 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Apr-22 19:25:58 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-22 19:25:58 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-22 19:25:58 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-22 19:25:58 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-22 19:25:58 LOG5 begin_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-22 19:25:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-22 19:25:58 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-22 19:25:58 INFO2 take_data: Starting WAPP 600-second scan: 911200248 2009-Apr-22 19:25:58 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-22 19:25:58 LOG5 begin_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-22 19:25:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-22 19:25:58 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:25:58 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84359.00 2009-Apr-22 19:25:58 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-22 19:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:26:00 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:26:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.081 (still bad) 2009-Apr-22 19:26:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.080 (still bad) 2009-Apr-22 19:26:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.080 (still bad) 2009-Apr-22 19:26:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.081 (still bad) 2009-Apr-22 19:26:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.082 (still bad) 2009-Apr-22 19:26:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.079 (still bad) 2009-Apr-22 19:26:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.080 (still bad) 2009-Apr-22 19:26:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.080 (still bad) 2009-Apr-22 19:26:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.082 (still bad) 2009-Apr-22 19:26:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.080 (still bad) 2009-Apr-22 19:26:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.078 (still bad) 2009-Apr-22 19:26:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.078 (still bad) 2009-Apr-22 19:26:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.080 (still bad) 2009-Apr-22 19:26:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.081 (still bad) 2009-Apr-22 19:26:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.080 (still bad) 2009-Apr-22 19:26:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.079 (still bad) 2009-Apr-22 19:26:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.081 (still bad) 2009-Apr-22 19:26:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.081 (still bad) 2009-Apr-22 19:26:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:26:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:26:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:26:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.083 (still bad) 2009-Apr-22 19:26:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:26:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.081 (still bad) 2009-Apr-22 19:26:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:26:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:26:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.048 0.986 0.997 2009-Apr-22 19:26:51 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.905 1.010 1.047 2009-Apr-22 19:26:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 1.082 0.975 1.080 2009-Apr-22 19:26:51 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.099 0.926 0.122 2009-Apr-22 19:26:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.080 (still bad) 2009-Apr-22 19:26:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.083 (still bad) 2009-Apr-22 19:26:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.080 (still bad) 2009-Apr-22 19:26:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.082 (still bad) 2009-Apr-22 19:27:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.081 (still bad) 2009-Apr-22 19:27:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.081 (still bad) 2009-Apr-22 19:27:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.082 (still bad) 2009-Apr-22 19:27:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.083 (still bad) 2009-Apr-22 19:27:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.082 (still bad) 2009-Apr-22 19:27:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:27:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:27:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:27:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.082 (still bad) 2009-Apr-22 19:27:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.083 (still bad) 2009-Apr-22 19:27:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:27:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.082 (still bad) 2009-Apr-22 19:27:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.082 (still bad) 2009-Apr-22 19:27:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.081 (still bad) 2009-Apr-22 19:27:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.079 (still bad) 2009-Apr-22 19:27:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.083 (still bad) 2009-Apr-22 19:27:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.081 (still bad) 2009-Apr-22 19:27:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.080 (still bad) 2009-Apr-22 19:27:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.082 (still bad) 2009-Apr-22 19:27:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.081 (still bad) 2009-Apr-22 19:27:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.082 (still bad) 2009-Apr-22 19:27:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.079 (still bad) 2009-Apr-22 19:27:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.082 (still bad) 2009-Apr-22 19:27:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.083 (still bad) 2009-Apr-22 19:27:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.082 (still bad) 2009-Apr-22 19:27:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:27:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 1.048 0.989 1.001 2009-Apr-22 19:27:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.907 1.011 1.044 2009-Apr-22 19:27:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.008 1.081 0.973 1.076 2009-Apr-22 19:27:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.099 0.926 0.122 2009-Apr-22 19:27:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.081 (still bad) 2009-Apr-22 19:27:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.082 (still bad) 2009-Apr-22 19:27:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:28:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:28:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-22 19:28:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:28:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.082 (still bad) 2009-Apr-22 19:28:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-22 19:28:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.081 (still bad) 2009-Apr-22 19:28:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:28:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-22 19:28:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:28:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.085 (still bad) 2009-Apr-22 19:28:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:28:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:28:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:28:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-22 19:28:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:28:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.085 (still bad) 2009-Apr-22 19:28:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.087 (still bad) 2009-Apr-22 19:28:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.086 (still bad) 2009-Apr-22 19:28:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-22 19:28:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-22 19:28:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-22 19:28:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:28:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.091 (still bad) 2009-Apr-22 19:28:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.086 (still bad) 2009-Apr-22 19:28:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:28:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-22 19:28:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.085 (still bad) 2009-Apr-22 19:28:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:28:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 1.047 0.980 0.993 2009-Apr-22 19:28:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.906 1.006 1.040 2009-Apr-22 19:28:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.085 0.973 1.075 2009-Apr-22 19:28:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 0.099 0.931 0.122 2009-Apr-22 19:28:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:28:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.084 (still bad) 2009-Apr-22 19:29:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.088 (still bad) 2009-Apr-22 19:29:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-22 19:29:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:29:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.082 (still bad) 2009-Apr-22 19:29:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.087 (still bad) 2009-Apr-22 19:29:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:29:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:29:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-22 19:29:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.085 (still bad) 2009-Apr-22 19:29:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:29:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.087 (still bad) 2009-Apr-22 19:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.082 (still bad) 2009-Apr-22 19:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-22 19:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.087 (still bad) 2009-Apr-22 19:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.083 (still bad) 2009-Apr-22 19:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.087 (still bad) 2009-Apr-22 19:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.083 (still bad) 2009-Apr-22 19:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-22 19:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-22 19:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-22 19:29:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:29:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.047 0.979 0.995 2009-Apr-22 19:29:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.908 1.007 1.040 2009-Apr-22 19:29:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 1.086 0.973 1.075 2009-Apr-22 19:29:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.099 0.925 0.122 2009-Apr-22 19:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:29:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:30:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:30:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-22 19:30:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:30:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:30:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:30:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:30:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:30:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-22 19:30:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:30:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:30:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-22 19:30:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:30:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-22 19:30:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-22 19:30:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-22 19:30:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:30:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-22 19:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-22 19:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-22 19:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:30:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:30:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 1.047 0.979 0.996 2009-Apr-22 19:30:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.907 1.007 1.040 2009-Apr-22 19:30:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.007 1.086 0.972 1.078 2009-Apr-22 19:30:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.099 0.932 0.122 2009-Apr-22 19:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-22 19:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-22 19:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-22 19:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:31:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-22 19:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-22 19:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:31:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:31:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:31:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:31:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-22 19:31:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:31:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:31:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-22 19:31:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.083 (still bad) 2009-Apr-22 19:31:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:31:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-22 19:31:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.083 (still bad) 2009-Apr-22 19:31:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:31:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:31:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:31:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:31:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:31:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-22 19:31:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:31:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-22 19:31:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:31:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.049 0.980 0.995 2009-Apr-22 19:31:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.909 1.007 1.040 2009-Apr-22 19:31:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.008 1.087 0.972 1.080 2009-Apr-22 19:31:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.099 0.924 0.122 2009-Apr-22 19:32:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:32:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:32:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:32:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.082 (still bad) 2009-Apr-22 19:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.083 (still bad) 2009-Apr-22 19:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-22 19:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-22 19:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.084 (still bad) 2009-Apr-22 19:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-22 19:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.089 (still bad) 2009-Apr-22 19:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.086 (still bad) 2009-Apr-22 19:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-22 19:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-22 19:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-22 19:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:32:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:32:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.085 (still bad) 2009-Apr-22 19:32:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:32:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-22 19:32:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-22 19:32:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:32:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.089 (still bad) 2009-Apr-22 19:32:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:32:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 1.053 0.981 0.996 2009-Apr-22 19:32:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.907 1.010 1.039 2009-Apr-22 19:32:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.006 1.086 0.976 1.079 2009-Apr-22 19:32:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.099 0.925 0.122 2009-Apr-22 19:33:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:33:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.092 (still bad) 2009-Apr-22 19:33:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:33:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:33:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-22 19:33:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.083 (still bad) 2009-Apr-22 19:33:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:33:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-22 19:33:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:33:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:33:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.090 (still bad) 2009-Apr-22 19:33:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.089 (still bad) 2009-Apr-22 19:33:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.091 (still bad) 2009-Apr-22 19:33:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-22 19:33:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-22 19:33:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-22 19:33:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-22 19:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-22 19:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-22 19:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.095 (still bad) 2009-Apr-22 19:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-22 19:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-22 19:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.094 (still bad) 2009-Apr-22 19:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.086 (still bad) 2009-Apr-22 19:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-22 19:34:00 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:34:00 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 1.048 0.981 0.996 2009-Apr-22 19:34:00 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.910 1.009 1.039 2009-Apr-22 19:34:00 LOG4 check_wapp_levels: WAPP-3 power levels: 1.008 1.087 0.974 1.077 2009-Apr-22 19:34:00 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.099 0.924 0.122 2009-Apr-22 19:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.088 (still bad) 2009-Apr-22 19:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-22 19:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.087 (still bad) 2009-Apr-22 19:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.085 (still bad) 2009-Apr-22 19:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.093 (still bad) 2009-Apr-22 19:34:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.096 (still bad) 2009-Apr-22 19:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-22 19:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-22 19:34:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-22 19:34:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:34:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:34:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:34:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:34:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:34:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:34:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 19:34:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:34:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:34:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2009-Apr-22 19:34:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:34:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:34:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:34:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:34:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:34:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:34:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:34:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:34:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:35:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:35:02 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:35:03 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 1.053 0.981 0.999 2009-Apr-22 19:35:03 LOG4 check_wapp_levels: WAPP-2 power levels: 0.949 0.912 1.011 1.040 2009-Apr-22 19:35:03 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.092 0.978 1.113 2009-Apr-22 19:35:03 LOG4 check_wapp_levels: WAPP-4 power levels: 1.053 0.099 0.927 0.122 2009-Apr-22 19:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:35:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2009-Apr-22 19:35:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:35:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:35:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:35:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:35:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:35:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:35:59 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:35:59 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-22 19:35:59 LOG5 end_task: Level: (3) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-22 19:35:59 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-22 19:35:59 LOG5 end_task: Level: (2) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-22 19:35:59 LOG1 fixed_driftmap: New position: year = 2009.3088751679468 RA = 09:13:02.8 RA/Dec = 09:13:35.9 +21:00:34.9 2009-Apr-22 19:35:59 NOTE fixed_driftmap: Correcting ZA to 2:39:21.2 ... 2009-Apr-22 19:35:59 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.6558996546 -CF 2009-Apr-22 19:35:59 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-22 19:35:59 START begin_task: Starting task 'WAPP calibration' 2009-Apr-22 19:35:59 LOG5 begin_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-22 19:35:59 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-22 19:35:59 START begin_task: Starting task 'selecting calibration type' 2009-Apr-22 19:35:59 LOG5 begin_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-22 19:35:59 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-22 19:35:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-22 19:35:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:35:59 START begin_task: Starting task 'waiting on setcal' 2009-Apr-22 19:35:59 LOG5 begin_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-22 19:35:59 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.6558996546 -CF 2009-Apr-22 19:35:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:35:59 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-22 19:35:59 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:35:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:35:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:35:59 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-22 19:35:59 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-22 19:35:59 LOG5 end_task: Level: (4) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-22 19:35:59 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-22 19:35:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-22 19:35:59 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-22 19:35:59 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-22 19:35:59 LOG5 begin_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-22 19:35:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:35:59 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-22 19:35:59 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-22 19:35:59 LOG5 end_task: Level: (4) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-22 19:35:59 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-22 19:35:59 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-22 19:35:59 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-22 19:35:59 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-22 19:35:59 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-22 19:35:59 LOG5 begin_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-22 19:36:00 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-22 19:36:00 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-22 19:36:00 LOG5 end_task: Level: (4) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-22 19:36:00 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-22 19:36:00 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-22 19:36:00 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-22 19:36:00 LOG5 end_task: Level: (3) ID = <10127> Status = 0 0 0 0 ok 2009-Apr-22 19:36:00 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-22 19:36:00 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-22 19:36:00 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-22 19:36:00 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 19:36:00 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-22 19:36:00 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 19:36:00 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-22 19:36:00 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 19:36:00 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-22 19:36:00 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-22 19:36:00 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-22 19:36:00 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-22 19:36:00 LOG5 begin_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-22 19:36:00 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-22 19:36:00 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-22 19:36:00 INFO2 take_data: Starting WAPP 1-second scan: 911200249 2009-Apr-22 19:36:00 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-22 19:36:00 LOG5 begin_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-22 19:36:00 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:36:00 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-22 19:36:00 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84961.00 2009-Apr-22 19:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:36:02 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:36:02 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:36:02 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-22 19:36:02 LOG5 end_task: Level: (4) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-22 19:36:02 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-22 19:36:02 LOG5 end_task: Level: (3) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-22 19:36:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-22 19:36:02 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-22 19:36:02 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-22 19:36:02 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 19:36:02 LOG5 begin_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-22 19:36:02 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 19:36:02 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-22 19:36:02 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 19:36:02 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-22 19:36:02 LOG5 end_task: Level: (3) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-22 19:36:02 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-22 19:36:02 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-22 19:36:02 LOG5 finish_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-22 19:36:02 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-22 19:36:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-22 19:36:02 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-22 19:36:02 LOG5 end_task: Level: (2) ID = <10126> Status = 0 0 0 0 ok 2009-Apr-22 19:36:02 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Apr-22 19:36:02 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-22 19:36:02 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-22 19:36:02 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-22 19:36:02 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-22 19:36:02 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-22 19:36:02 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-22 19:36:02 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-22 19:36:02 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-22 19:36:02 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-22 19:36:02 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-22 19:36:02 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-22 19:36:02 INFO2 take_data: Starting WAPP 600-second scan: 911200250 2009-Apr-22 19:36:03 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-22 19:36:03 LOG5 begin_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-22 19:36:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-22 19:36:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:36:03 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:36:03 NOTE WAPPDATA-new_file: New FITS file: wapp.20090422.a2010.0002.fits 2009-Apr-22 19:36:03 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090422.a2010.0002.fits} 2009-Apr-22 19:36:03 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84964.00 2009-Apr-22 19:36:03 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-22 19:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:36:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:36:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.409 1.436 1.352 1.374 2009-Apr-22 19:36:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.321 1.264 1.407 1.430 2009-Apr-22 19:36:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.421 1.536 1.367 1.483 2009-Apr-22 19:36:05 LOG4 check_wapp_levels: WAPP-4 power levels: 1.500 0.099 1.323 0.122 2009-Apr-22 19:36:05 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:36:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:36:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:36:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:36:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:36:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:36:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:36:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:36:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:36:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:36:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:36:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:36:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:36:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:36:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2009-Apr-22 19:36:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-22 19:36:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:36:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:36:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-22 19:36:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:36:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:36:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:36:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:36:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:36:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:36:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:36:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:36:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:37:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:37:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:37:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:37:07 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2009-Apr-22 19:37:07 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 1.048 0.979 0.994 2009-Apr-22 19:37:07 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.911 1.007 1.034 2009-Apr-22 19:37:07 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.090 0.973 1.105 2009-Apr-22 19:37:07 LOG4 check_wapp_levels: WAPP-4 power levels: 1.046 0.098 0.923 0.121 2009-Apr-22 19:37:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:37:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:37:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:37:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:37:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-22 19:37:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:37:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:37:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:37:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:37:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:37:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:37:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:37:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:37:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:37:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:37:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:37:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:37:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:37:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:37:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:37:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2009-Apr-22 19:37:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:37:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:37:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:38:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:38:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:38:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:38:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:38:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2009-Apr-22 19:38:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.051 1.013 1.027 2009-Apr-22 19:38:08 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.911 1.009 1.035 2009-Apr-22 19:38:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 1.096 0.974 1.105 2009-Apr-22 19:38:08 LOG4 check_wapp_levels: WAPP-4 power levels: 1.048 0.098 0.924 0.121 2009-Apr-22 19:38:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:38:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:38:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:38:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:38:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:38:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:38:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:38:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:38:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:38:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2009-Apr-22 19:38:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.109 (still bad) 2009-Apr-22 19:38:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2009-Apr-22 19:38:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2009-Apr-22 19:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:38:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:38:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2009-Apr-22 19:38:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:38:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:38:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:38:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:38:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:38:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-22 19:38:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:38:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:38:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:39:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:39:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:39:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:39:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:39:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2009-Apr-22 19:39:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 1.052 0.981 0.998 2009-Apr-22 19:39:09 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.911 1.009 1.032 2009-Apr-22 19:39:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 1.096 0.973 1.103 2009-Apr-22 19:39:09 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.098 0.925 0.122 2009-Apr-22 19:39:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:39:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:39:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:39:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:39:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:39:21 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:39:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-22 19:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-22 19:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:40:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:40:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:40:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:40:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:40:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2009-Apr-22 19:40:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:40:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.053 0.988 1.007 2009-Apr-22 19:40:10 LOG4 check_wapp_levels: WAPP-2 power levels: 0.947 0.913 1.009 1.033 2009-Apr-22 19:40:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 1.096 0.977 1.109 2009-Apr-22 19:40:10 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.099 0.926 0.122 2009-Apr-22 19:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:40:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2009-Apr-22 19:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-22 19:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:41:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:41:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 1.049 0.980 0.998 2009-Apr-22 19:41:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.912 1.008 1.035 2009-Apr-22 19:41:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 1.093 0.973 1.105 2009-Apr-22 19:41:12 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.099 0.924 0.122 2009-Apr-22 19:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-22 19:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:41:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:41:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:41:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:41:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-22 19:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:42:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2009-Apr-22 19:42:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 1.054 0.981 0.999 2009-Apr-22 19:42:13 LOG4 check_wapp_levels: WAPP-2 power levels: 0.945 0.913 1.008 1.034 2009-Apr-22 19:42:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.092 0.974 1.102 2009-Apr-22 19:42:13 LOG4 check_wapp_levels: WAPP-4 power levels: 1.049 0.098 0.925 0.122 2009-Apr-22 19:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:42:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-22 19:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-22 19:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:42:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-22 19:42:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:43:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2009-Apr-22 19:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:43:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2009-Apr-22 19:43:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 1.054 0.982 1.000 2009-Apr-22 19:43:14 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.917 1.009 1.032 2009-Apr-22 19:43:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.010 1.096 0.973 1.103 2009-Apr-22 19:43:14 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.098 0.927 0.122 2009-Apr-22 19:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:43:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:44:16 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:44:16 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 1.055 0.983 1.001 2009-Apr-22 19:44:16 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.916 1.010 1.035 2009-Apr-22 19:44:16 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 1.094 0.976 1.105 2009-Apr-22 19:44:16 LOG4 check_wapp_levels: WAPP-4 power levels: 1.052 0.099 0.928 0.122 2009-Apr-22 19:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:44:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:44:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-22 19:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-22 19:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:45:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2009-Apr-22 19:45:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 1.057 0.984 1.001 2009-Apr-22 19:45:17 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.915 1.009 1.034 2009-Apr-22 19:45:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 1.096 0.977 1.103 2009-Apr-22 19:45:17 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.098 0.927 0.122 2009-Apr-22 19:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-22 19:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:45:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-22 19:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-22 19:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2009-Apr-22 19:45:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:45:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:45:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:45:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:45:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-22 19:46:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:46:04 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:46:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-22 19:46:04 LOG5 end_task: Level: (3) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-22 19:46:04 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-22 19:46:04 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-22 19:46:04 LOG1 fixed_driftmap: New position: year = 2009.3088943392399 RA = 09:23:09.6 RA/Dec = 09:23:42.6 +21:00:29.2 2009-Apr-22 19:46:04 NOTE fixed_driftmap: Correcting ZA to 2:39:15.5 ... 2009-Apr-22 19:46:04 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.6543036252 -CF 2009-Apr-22 19:46:04 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-22 19:46:04 START begin_task: Starting task 'WAPP calibration' 2009-Apr-22 19:46:04 LOG5 begin_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-22 19:46:04 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-22 19:46:04 START begin_task: Starting task 'selecting calibration type' 2009-Apr-22 19:46:04 LOG5 begin_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-22 19:46:04 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-22 19:46:04 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-22 19:46:04 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:46:04 START begin_task: Starting task 'waiting on setcal' 2009-Apr-22 19:46:04 LOG5 begin_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-22 19:46:04 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.6543036252 -CF 2009-Apr-22 19:46:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:46:04 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-22 19:46:04 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:46:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:46:04 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-22 19:46:04 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-22 19:46:04 LOG5 end_task: Level: (4) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-22 19:46:04 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-22 19:46:04 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-22 19:46:04 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-22 19:46:04 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-22 19:46:04 LOG5 begin_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-22 19:46:04 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:46:05 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-22 19:46:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-22 19:46:05 LOG5 end_task: Level: (4) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-22 19:46:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-22 19:46:05 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-22 19:46:05 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-22 19:46:05 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-22 19:46:05 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-22 19:46:05 LOG5 begin_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-22 19:46:05 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-22 19:46:05 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-22 19:46:05 LOG5 end_task: Level: (4) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-22 19:46:05 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-22 19:46:05 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-22 19:46:05 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-22 19:46:05 LOG5 end_task: Level: (3) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-22 19:46:05 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-22 19:46:05 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-22 19:46:05 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-22 19:46:05 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 19:46:05 LOG5 begin_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-22 19:46:05 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 19:46:05 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-22 19:46:05 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 19:46:05 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-22 19:46:05 LOG5 end_task: Level: (3) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-22 19:46:05 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-22 19:46:05 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-22 19:46:05 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-22 19:46:05 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-22 19:46:05 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-22 19:46:05 INFO2 take_data: Starting WAPP 1-second scan: 911200251 2009-Apr-22 19:46:05 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-22 19:46:05 LOG5 begin_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-22 19:46:05 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:46:05 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-22 19:46:05 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85566.00 2009-Apr-22 19:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-22 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:46:07 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:46:07 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:46:07 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-22 19:46:07 LOG5 end_task: Level: (4) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-22 19:46:07 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-22 19:46:07 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-22 19:46:07 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-22 19:46:07 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-22 19:46:07 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-22 19:46:07 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 19:46:07 LOG5 begin_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-22 19:46:07 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 19:46:07 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-22 19:46:07 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 19:46:07 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-22 19:46:07 LOG5 end_task: Level: (3) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-22 19:46:08 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-22 19:46:08 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-22 19:46:08 LOG5 finish_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-22 19:46:08 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-22 19:46:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-22 19:46:08 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-22 19:46:08 LOG5 end_task: Level: (2) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-22 19:46:08 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 3 of 99 2009-Apr-22 19:46:08 LOG4 send_obs_status: To obs_status: <1> LOOP 3 2009-Apr-22 19:46:08 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-22 19:46:08 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-22 19:46:08 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-22 19:46:08 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-22 19:46:08 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-22 19:46:08 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-22 19:46:08 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-22 19:46:08 LOG5 begin_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-22 19:46:08 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-22 19:46:08 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-22 19:46:08 INFO2 take_data: Starting WAPP 600-second scan: 911200252 2009-Apr-22 19:46:08 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-22 19:46:08 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-22 19:46:08 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-22 19:46:08 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.535 (still bad) 2009-Apr-22 19:46:08 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-22 19:46:08 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85569.00 2009-Apr-22 19:46:08 NOTE WAPPDATA-new_file: New FITS file: wapp.20090422.a2010.0003.fits 2009-Apr-22 19:46:08 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090422.a2010.0003.fits} 2009-Apr-22 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:46:10 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.535 (still bad) 2009-Apr-22 19:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2009-Apr-22 19:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2009-Apr-22 19:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:46:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:46:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.004 1.053 0.982 0.998 2009-Apr-22 19:46:18 LOG4 check_wapp_levels: WAPP-2 power levels: 0.943 0.913 1.013 1.037 2009-Apr-22 19:46:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 1.095 0.976 1.099 2009-Apr-22 19:46:18 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.099 0.932 0.122 2009-Apr-22 19:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2009-Apr-22 19:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-22 19:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2009-Apr-22 19:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2009-Apr-22 19:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:46:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-22 19:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.107 (still bad) 2009-Apr-22 19:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.108 (still bad) 2009-Apr-22 19:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:46:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:46:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:46:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:46:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:47:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:47:03 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:47:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:47:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:47:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:47:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:47:15 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:47:17 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:47:19 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2009-Apr-22 19:47:19 LOG4 check_wapp_levels: WAPP-1 power levels: 1.004 1.053 0.980 0.998 2009-Apr-22 19:47:19 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.914 1.007 1.032 2009-Apr-22 19:47:19 LOG4 check_wapp_levels: WAPP-3 power levels: 1.009 1.089 0.976 1.100 2009-Apr-22 19:47:19 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.098 0.925 0.122 2009-Apr-22 19:47:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.100 (still bad) 2009-Apr-22 19:47:23 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:47:25 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2009-Apr-22 19:47:27 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:47:29 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:47:31 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2009-Apr-22 19:47:33 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2009-Apr-22 19:47:35 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:47:37 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:47:39 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:47:41 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:47:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:47:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:47:47 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:47:49 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2009-Apr-22 19:47:51 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:47:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:47:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2009-Apr-22 19:47:57 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2009-Apr-22 19:47:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:48:01 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:48:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-22 19:48:05 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:48:07 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:48:09 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:48:11 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2009-Apr-22 19:48:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:48:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:48:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:48:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2009-Apr-22 19:48:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 1.053 0.981 0.997 2009-Apr-22 19:48:20 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.912 1.008 1.033 2009-Apr-22 19:48:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.011 1.092 0.975 1.099 2009-Apr-22 19:48:20 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.098 0.925 0.121 2009-Apr-22 19:48:22 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:48:24 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2009-Apr-22 19:48:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:48:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:48:30 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:48:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.099 (still bad) 2009-Apr-22 19:48:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:48:36 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2009-Apr-22 19:48:38 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2009-Apr-22 19:48:40 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:48:42 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.098 (still bad) 2009-Apr-22 19:48:44 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.099 (still bad) 2009-Apr-22 19:48:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-22 19:48:48 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.100 (still bad) 2009-Apr-22 19:48:50 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:48:52 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:48:54 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:48:56 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.101 (still bad) 2009-Apr-22 19:48:58 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:49:00 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:49:02 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:49:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:49:06 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:49:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:49:10 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:49:12 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:49:14 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:49:16 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.110 (still bad) 2009-Apr-22 19:49:18 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:49:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-22 19:49:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.098 < 0.75)! 2009-Apr-22 19:49:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 1.056 0.985 1.002 2009-Apr-22 19:49:22 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.914 1.010 1.038 2009-Apr-22 19:49:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 1.096 0.978 1.107 2009-Apr-22 19:49:22 LOG4 check_wapp_levels: WAPP-4 power levels: 1.053 0.098 0.928 0.121 2009-Apr-22 19:49:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:49:26 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:49:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:49:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-22 19:49:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-22 19:49:34 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.106 (still bad) 2009-Apr-22 19:49:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-22 19:49:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:49:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:49:43 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:49:45 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:49:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-22 19:49:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-22 19:49:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.105 (still bad) 2009-Apr-22 19:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.103 (still bad) 2009-Apr-22 19:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.102 (still bad) 2009-Apr-22 19:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-22 19:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-22 19:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-22 19:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.098 and 1.104 (still bad) 2009-Apr-22 19:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-22 19:50:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:50:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 1.055 0.982 0.998 2009-Apr-22 19:50:23 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.915 1.009 1.037 2009-Apr-22 19:50:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.012 1.091 0.975 1.102 2009-Apr-22 19:50:23 LOG4 check_wapp_levels: WAPP-4 power levels: 1.050 0.099 0.926 0.122 2009-Apr-22 19:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-22 19:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.101 (still bad) 2009-Apr-22 19:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-22 19:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.102 (still bad) 2009-Apr-22 19:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-22 19:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:50:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.103 (still bad) 2009-Apr-22 19:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-22 19:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-22 19:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:51:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:51:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:51:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:51:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.004 1.058 0.982 1.000 2009-Apr-22 19:51:24 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.915 1.010 1.039 2009-Apr-22 19:51:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 1.097 0.976 1.105 2009-Apr-22 19:51:24 LOG4 check_wapp_levels: WAPP-4 power levels: 1.051 0.099 0.926 0.122 2009-Apr-22 19:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:51:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.104 (still bad) 2009-Apr-22 19:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.105 (still bad) 2009-Apr-22 19:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:52:26 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:52:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 1.061 0.985 1.003 2009-Apr-22 19:52:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.917 1.012 1.045 2009-Apr-22 19:52:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 1.097 0.980 1.111 2009-Apr-22 19:52:27 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.099 0.929 0.122 2009-Apr-22 19:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 19:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 19:52:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.106 (still bad) 2009-Apr-22 19:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:53:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:53:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.060 0.986 1.006 2009-Apr-22 19:53:29 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.918 1.011 1.050 2009-Apr-22 19:53:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.014 1.096 0.981 1.108 2009-Apr-22 19:53:29 LOG4 check_wapp_levels: WAPP-4 power levels: 1.054 0.099 0.929 0.122 2009-Apr-22 19:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 19:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:53:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:53:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:53:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:54:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:54:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 1.061 0.984 1.007 2009-Apr-22 19:54:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.919 1.019 1.059 2009-Apr-22 19:54:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.013 1.102 0.979 1.114 2009-Apr-22 19:54:30 LOG4 check_wapp_levels: WAPP-4 power levels: 1.055 0.099 0.930 0.122 2009-Apr-22 19:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 19:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:54:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 19:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2009-Apr-22 19:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 19:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2009-Apr-22 19:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.121 (still bad) 2009-Apr-22 19:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2009-Apr-22 19:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 19:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:55:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2009-Apr-22 19:55:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:55:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:55:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 19:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 19:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2009-Apr-22 19:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.134 (still bad) 2009-Apr-22 19:55:31 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:55:31 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 1.061 0.984 1.007 2009-Apr-22 19:55:31 LOG4 check_wapp_levels: WAPP-2 power levels: 0.944 0.919 1.010 1.054 2009-Apr-22 19:55:31 LOG4 check_wapp_levels: WAPP-3 power levels: 1.040 1.126 0.981 1.116 2009-Apr-22 19:55:31 LOG4 check_wapp_levels: WAPP-4 power levels: 1.054 0.099 0.927 0.123 2009-Apr-22 19:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2009-Apr-22 19:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.124 (still bad) 2009-Apr-22 19:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 19:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 19:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-22 19:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 19:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 19:55:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-22 19:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 19:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 19:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-22 19:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2009-Apr-22 19:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2009-Apr-22 19:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2009-Apr-22 19:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 19:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 19:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-22 19:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 19:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 19:56:09 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:56:09 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-22 19:56:09 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-22 19:56:09 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-22 19:56:09 LOG5 end_task: Level: (2) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-22 19:56:09 LOG1 fixed_driftmap: New position: year = 2009.3089135105331 RA = 09:33:16.4 RA/Dec = 09:33:49.2 +21:00:23.7 2009-Apr-22 19:56:09 NOTE fixed_driftmap: Correcting ZA to 2:39:10.0 ... 2009-Apr-22 19:56:09 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.6527824567 -CF 2009-Apr-22 19:56:09 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-22 19:56:09 START begin_task: Starting task 'WAPP calibration' 2009-Apr-22 19:56:09 LOG5 begin_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-22 19:56:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-22 19:56:09 START begin_task: Starting task 'selecting calibration type' 2009-Apr-22 19:56:09 LOG5 begin_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-22 19:56:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-22 19:56:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-22 19:56:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:56:09 START begin_task: Starting task 'waiting on setcal' 2009-Apr-22 19:56:09 LOG5 begin_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-22 19:56:09 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.6527824567 -CF 2009-Apr-22 19:56:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:56:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-22 19:56:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 19:56:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:56:10 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-22 19:56:10 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-22 19:56:10 LOG5 end_task: Level: (4) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-22 19:56:10 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-22 19:56:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-22 19:56:10 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-22 19:56:10 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-22 19:56:10 LOG5 begin_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-22 19:56:10 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 19:56:10 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-22 19:56:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-22 19:56:10 LOG5 end_task: Level: (4) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-22 19:56:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-22 19:56:10 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-22 19:56:10 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-22 19:56:10 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-22 19:56:10 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-22 19:56:10 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-22 19:56:10 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-22 19:56:10 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-22 19:56:10 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-22 19:56:10 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-22 19:56:10 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-22 19:56:10 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-22 19:56:10 LOG5 end_task: Level: (3) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-22 19:56:10 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-22 19:56:10 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-22 19:56:10 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-22 19:56:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 19:56:10 LOG5 begin_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-22 19:56:10 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 19:56:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-22 19:56:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 19:56:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-22 19:56:10 LOG5 end_task: Level: (3) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-22 19:56:10 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-22 19:56:10 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-22 19:56:10 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-22 19:56:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-22 19:56:10 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-22 19:56:10 INFO2 take_data: Starting WAPP 1-second scan: 911200253 2009-Apr-22 19:56:10 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-22 19:56:10 LOG5 begin_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-22 19:56:10 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:56:10 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-22 19:56:10 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86171.00 2009-Apr-22 19:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-22 19:56:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:56:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:56:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:56:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:56:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:56:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:56:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:56:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:56:12 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:56:12 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 19:56:12 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-22 19:56:12 LOG5 end_task: Level: (4) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-22 19:56:12 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-22 19:56:12 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-22 19:56:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-22 19:56:12 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-22 19:56:12 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-22 19:56:12 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 19:56:12 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-22 19:56:12 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 19:56:12 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-22 19:56:12 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 19:56:12 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-22 19:56:12 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-22 19:56:12 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-22 19:56:12 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-22 19:56:12 LOG5 finish_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-22 19:56:12 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-22 19:56:12 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-22 19:56:12 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-22 19:56:12 LOG5 end_task: Level: (2) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-22 19:56:12 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 4 of 99 2009-Apr-22 19:56:13 LOG4 send_obs_status: To obs_status: <1> LOOP 4 2009-Apr-22 19:56:13 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-22 19:56:13 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-22 19:56:13 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-22 19:56:13 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-22 19:56:13 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-22 19:56:13 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-22 19:56:13 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-22 19:56:13 LOG5 begin_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-22 19:56:13 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-22 19:56:13 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-22 19:56:13 INFO2 take_data: Starting WAPP 600-second scan: 911200254 2009-Apr-22 19:56:13 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-22 19:56:13 LOG5 begin_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-22 19:56:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-22 19:56:13 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 19:56:13 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-22 19:56:13 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86174.00 2009-Apr-22 19:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.548 (still bad) 2009-Apr-22 19:56:13 NOTE WAPPDATA-new_file: New FITS file: wapp.20090422.a2010.0004.fits 2009-Apr-22 19:56:13 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090422.a2010.0004.fits} 2009-Apr-22 19:56:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 19:56:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 19:56:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 19:56:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 19:56:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 19:56:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 19:56:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 19:56:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 19:56:15 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 19:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.548 (still bad) 2009-Apr-22 19:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-22 19:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-22 19:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 19:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 19:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:56:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:56:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.063 0.986 1.008 2009-Apr-22 19:56:33 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.923 1.010 1.059 2009-Apr-22 19:56:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.103 0.981 1.115 2009-Apr-22 19:56:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.054 0.099 0.929 0.123 2009-Apr-22 19:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 19:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:56:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 19:56:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:56:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 19:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 19:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 19:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 19:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 19:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 19:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 19:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:57:34 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:57:34 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 1.060 0.985 1.010 2009-Apr-22 19:57:34 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.916 1.011 1.053 2009-Apr-22 19:57:34 LOG4 check_wapp_levels: WAPP-3 power levels: 1.015 1.099 0.982 1.111 2009-Apr-22 19:57:34 LOG4 check_wapp_levels: WAPP-4 power levels: 1.054 0.099 0.929 0.123 2009-Apr-22 19:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:57:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 19:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 19:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 19:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:58:35 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:58:35 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.062 0.986 1.007 2009-Apr-22 19:58:35 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.918 1.010 1.049 2009-Apr-22 19:58:35 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 1.099 0.984 1.109 2009-Apr-22 19:58:35 LOG4 check_wapp_levels: WAPP-4 power levels: 1.056 0.099 0.930 0.123 2009-Apr-22 19:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:58:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 19:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:59:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:59:36 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 19:59:36 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 1.061 0.985 1.009 2009-Apr-22 19:59:36 LOG4 check_wapp_levels: WAPP-2 power levels: 0.946 0.920 1.011 1.051 2009-Apr-22 19:59:36 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 1.100 0.983 1.111 2009-Apr-22 19:59:36 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 0.099 0.930 0.122 2009-Apr-22 19:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 19:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 19:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:59:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 19:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 19:59:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 19:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 20:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 20:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 20:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 20:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 20:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 20:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 20:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 20:00:38 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 20:00:38 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 1.061 0.985 1.006 2009-Apr-22 20:00:38 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.921 1.011 1.050 2009-Apr-22 20:00:38 LOG4 check_wapp_levels: WAPP-3 power levels: 1.016 1.098 0.980 1.107 2009-Apr-22 20:00:38 LOG4 check_wapp_levels: WAPP-4 power levels: 1.057 0.099 0.931 0.122 2009-Apr-22 20:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 20:00:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:00:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 20:00:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:00:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 20:00:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 20:00:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:00:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:00:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 20:00:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:01:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:01:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 20:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.123 (still bad) 2009-Apr-22 20:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 20:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:01:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 20:01:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.064 0.989 1.009 2009-Apr-22 20:01:39 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.919 1.011 1.051 2009-Apr-22 20:01:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.097 0.983 1.112 2009-Apr-22 20:01:39 LOG4 check_wapp_levels: WAPP-4 power levels: 1.058 0.099 0.931 0.122 2009-Apr-22 20:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 20:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 20:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 20:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:01:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 20:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.107 (still bad) 2009-Apr-22 20:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 20:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 20:02:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 20:02:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:02:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.108 (still bad) 2009-Apr-22 20:02:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:02:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:02:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:02:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 20:02:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:02:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:02:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:02:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:02:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:02:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:02:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:02:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:02:40 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 20:02:40 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 1.064 0.988 1.010 2009-Apr-22 20:02:40 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.925 1.015 1.047 2009-Apr-22 20:02:40 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.099 0.984 1.113 2009-Apr-22 20:02:40 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.099 0.935 0.123 2009-Apr-22 20:02:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 20:02:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:02:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:02:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:02:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:02:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:02:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:02:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.109 (still bad) 2009-Apr-22 20:02:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:03:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:03:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:03:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:03:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:03:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:03:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:03:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:03:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:03:16 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:03:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:03:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:03:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:03:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:03:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:03:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:03:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:03:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:03:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:03:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:03:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:03:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:03:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 20:03:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 1.067 0.990 1.011 2009-Apr-22 20:03:42 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.923 1.015 1.046 2009-Apr-22 20:03:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.018 1.102 0.987 1.115 2009-Apr-22 20:03:42 LOG4 check_wapp_levels: WAPP-4 power levels: 1.077 0.099 0.949 0.122 2009-Apr-22 20:03:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:03:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:03:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:03:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:03:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 20:03:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:03:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:03:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:04:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:04:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:04:05 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:04:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:04:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:04:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:04:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:04:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:04:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:04:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:04:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:04:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:04:25 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:04:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:04:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:04:31 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:04:33 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:04:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:04:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:04:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:04:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:04:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 20:04:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 1.066 0.989 1.008 2009-Apr-22 20:04:43 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.922 1.013 1.047 2009-Apr-22 20:04:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.017 1.100 0.987 1.113 2009-Apr-22 20:04:43 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.099 0.934 0.123 2009-Apr-22 20:04:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:04:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:04:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:04:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:04:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2009-Apr-22 20:04:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:04:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:04:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:05:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:05:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:05:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:05:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:05:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:05:11 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:05:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:05:15 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:05:17 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2009-Apr-22 20:05:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:05:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:05:23 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:05:26 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:05:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:05:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2009-Apr-22 20:05:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:05:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:05:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:05:38 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.111 (still bad) 2009-Apr-22 20:05:40 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.112 (still bad) 2009-Apr-22 20:05:42 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 20:05:44 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 20:05:44 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 1.063 0.989 1.008 2009-Apr-22 20:05:44 LOG4 check_wapp_levels: WAPP-2 power levels: 0.948 0.922 1.013 1.043 2009-Apr-22 20:05:44 LOG4 check_wapp_levels: WAPP-3 power levels: 1.020 1.101 0.984 1.111 2009-Apr-22 20:05:44 LOG4 check_wapp_levels: WAPP-4 power levels: 1.061 0.099 0.935 0.122 2009-Apr-22 20:05:46 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.110 (still bad) 2009-Apr-22 20:05:48 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:05:50 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:05:52 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:05:54 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2009-Apr-22 20:05:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:05:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:06:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 20:06:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:06:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:06:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.122 (still bad) 2009-Apr-22 20:06:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:06:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:06:12 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:06:14 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 20:06:14 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-22 20:06:14 LOG5 end_task: Level: (3) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-22 20:06:14 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-22 20:06:14 LOG5 end_task: Level: (2) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-22 20:06:14 LOG1 fixed_driftmap: New position: year = 2009.3089326818263 RA = 09:43:23.1 RA/Dec = 09:43:55.9 +21:00:18.5 2009-Apr-22 20:06:14 NOTE fixed_driftmap: Correcting ZA to 2:39:04.8 ... 2009-Apr-22 20:06:14 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.6513391116 -CF 2009-Apr-22 20:06:14 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-22 20:06:14 START begin_task: Starting task 'WAPP calibration' 2009-Apr-22 20:06:14 LOG5 begin_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-22 20:06:14 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-22 20:06:14 START begin_task: Starting task 'selecting calibration type' 2009-Apr-22 20:06:14 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-22 20:06:14 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-22 20:06:14 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-22 20:06:14 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 20:06:14 START begin_task: Starting task 'waiting on setcal' 2009-Apr-22 20:06:14 LOG5 begin_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-22 20:06:14 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.6513391116 -CF 2009-Apr-22 20:06:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-22 20:06:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 20:06:14 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-22 20:06:14 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 20:06:14 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 20:06:15 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-22 20:06:15 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-22 20:06:15 LOG5 end_task: Level: (4) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-22 20:06:15 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-22 20:06:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-22 20:06:15 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-22 20:06:15 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-22 20:06:15 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-22 20:06:15 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 20:06:15 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-22 20:06:15 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-22 20:06:15 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-22 20:06:15 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-22 20:06:15 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-22 20:06:15 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-22 20:06:15 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-22 20:06:15 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-22 20:06:15 LOG5 begin_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-22 20:06:15 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-22 20:06:15 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-22 20:06:15 LOG5 end_task: Level: (4) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-22 20:06:15 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-22 20:06:15 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-22 20:06:15 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-22 20:06:15 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-22 20:06:15 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-22 20:06:15 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-22 20:06:15 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-22 20:06:15 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 20:06:15 LOG5 begin_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-22 20:06:15 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 20:06:15 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-22 20:06:15 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 20:06:15 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-22 20:06:15 LOG5 end_task: Level: (3) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-22 20:06:15 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-22 20:06:15 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-22 20:06:15 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-22 20:06:15 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-22 20:06:15 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-22 20:06:15 INFO2 take_data: Starting WAPP 1-second scan: 911200255 2009-Apr-22 20:06:15 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-22 20:06:15 LOG5 begin_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-22 20:06:15 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 20:06:15 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-22 20:06:15 INFO1 WAPP=1+2+3+4-start_spectra: start sec 376.00 2009-Apr-22 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 20:06:17 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 20:06:17 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 20:06:17 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-22 20:06:17 LOG5 end_task: Level: (4) ID = <10166> Status = 0 0 0 0 ok 2009-Apr-22 20:06:17 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-22 20:06:17 LOG5 end_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-22 20:06:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-22 20:06:17 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-22 20:06:17 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-22 20:06:17 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 20:06:17 LOG5 begin_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-22 20:06:17 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 20:06:17 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-22 20:06:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-22 20:06:17 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 20:06:17 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-22 20:06:17 LOG5 end_task: Level: (3) ID = <10167> Status = 0 0 0 0 ok 2009-Apr-22 20:06:17 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-22 20:06:17 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-22 20:06:17 LOG5 finish_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-22 20:06:17 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-22 20:06:17 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-22 20:06:17 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-22 20:06:17 LOG5 end_task: Level: (2) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-22 20:06:17 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 5 of 99 2009-Apr-22 20:06:17 LOG4 send_obs_status: To obs_status: <1> LOOP 5 2009-Apr-22 20:06:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-22 20:06:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-22 20:06:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-22 20:06:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-22 20:06:18 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-22 20:06:18 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-22 20:06:18 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-22 20:06:18 LOG5 begin_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-22 20:06:18 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-22 20:06:18 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-22 20:06:18 INFO2 take_data: Starting WAPP 600-second scan: 911200256 2009-Apr-22 20:06:18 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-22 20:06:18 LOG5 begin_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-22 20:06:18 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-22 20:06:18 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-22 20:06:18 INFO1 WAPP=1+2+3+4-start_spectra: start sec 379.00 2009-Apr-22 20:06:18 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-22 20:06:18 NOTE WAPPDATA-new_file: New FITS file: wapp.20090422.a2010.0005.fits 2009-Apr-22 20:06:18 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090422.a2010.0005.fits} 2009-Apr-22 20:06:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-22 20:06:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-22 20:06:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-22 20:06:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-22 20:06:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-22 20:06:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.000000 MHz 2009-Apr-22 20:06:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1925.000000 MHz 2009-Apr-22 20:06:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 2125.000000 MHz 2009-Apr-22 20:06:20 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1825.000000 MHz 2009-Apr-22 20:06:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.563 (still bad) 2009-Apr-22 20:06:22 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:06:24 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:06:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:06:28 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.119 (still bad) 2009-Apr-22 20:06:30 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2009-Apr-22 20:06:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:06:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 20:06:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:06:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:06:41 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:06:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:06:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 20:06:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 1.060 0.988 1.009 2009-Apr-22 20:06:45 LOG4 check_wapp_levels: WAPP-2 power levels: 0.950 0.922 1.014 1.047 2009-Apr-22 20:06:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.019 1.102 0.985 1.114 2009-Apr-22 20:06:45 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.099 0.934 0.123 2009-Apr-22 20:06:47 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:06:49 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:06:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:06:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-22 20:06:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:06:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:06:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:07:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.111 (still bad) 2009-Apr-22 20:07:03 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:07:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-22 20:07:07 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:07:09 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:07:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:07:13 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:07:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:07:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-22 20:07:19 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:07:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:07:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:07:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:07:27 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:07:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:07:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:07:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:07:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 20:07:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 20:07:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:07:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:07:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 20:07:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:07:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-22 20:07:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.013 1.063 0.992 1.013 2009-Apr-22 20:07:47 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.925 1.017 1.048 2009-Apr-22 20:07:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.025 1.106 0.986 1.116 2009-Apr-22 20:07:47 LOG4 check_wapp_levels: WAPP-4 power levels: 1.059 0.100 0.935 0.123 2009-Apr-22 20:07:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:07:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:07:53 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:07:55 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:07:57 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 20:07:59 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 20:08:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 20:08:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 20:08:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 20:08:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:08:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:08:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:08:14 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 20:08:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:08:18 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2009-Apr-22 20:08:20 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 20:08:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:08:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:08:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:08:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:08:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:08:32 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:08:34 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 20:08:36 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:08:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:08:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:08:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:08:44 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:08:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:08:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-22 20:08:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 1.065 0.991 1.011 2009-Apr-22 20:08:48 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.927 1.016 1.048 2009-Apr-22 20:08:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 1.101 0.986 1.117 2009-Apr-22 20:08:48 LOG4 check_wapp_levels: WAPP-4 power levels: 1.060 0.100 0.935 0.123 2009-Apr-22 20:08:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:08:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:08:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-22 20:08:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:08:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 20:09:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2009-Apr-22 20:09:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:09:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-22 20:09:06 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.120 (still bad) 2009-Apr-22 20:09:08 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 20:09:10 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 20:09:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:09:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:09:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:09:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:09:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:09:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:09:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:09:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:09:29 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 20:09:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:09:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:09:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:09:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:09:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:09:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:09:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:09:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:09:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:09:49 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-22 20:09:49 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 1.067 0.991 1.010 2009-Apr-22 20:09:49 LOG4 check_wapp_levels: WAPP-2 power levels: 0.951 0.924 1.016 1.053 2009-Apr-22 20:09:49 LOG4 check_wapp_levels: WAPP-3 power levels: 1.022 1.103 0.987 1.114 2009-Apr-22 20:09:49 LOG4 check_wapp_levels: WAPP-4 power levels: 1.062 0.100 0.935 0.123 2009-Apr-22 20:09:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:09:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-22 20:09:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:09:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:09:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:10:01 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:10:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:10:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-22 20:10:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:10:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-22 20:10:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:10:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:10:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:10:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-22 20:10:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:10:21 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.113 (still bad) 2009-Apr-22 20:10:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:10:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:10:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:10:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-22 20:10:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:10:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:10:35 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 20:10:37 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:10:39 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:10:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-22 20:10:43 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.117 (still bad) 2009-Apr-22 20:10:45 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:10:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:10:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:10:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.099 < 0.75)! 2009-Apr-22 20:10:52 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 1.066 0.993 1.011 2009-Apr-22 20:10:52 LOG4 check_wapp_levels: WAPP-2 power levels: 0.954 0.925 1.016 1.050 2009-Apr-22 20:10:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.023 1.108 0.987 1.116 2009-Apr-22 20:10:52 LOG4 check_wapp_levels: WAPP-4 power levels: 1.063 0.099 0.937 0.123 2009-Apr-22 20:10:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-22 20:10:56 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:10:58 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.115 (still bad) 2009-Apr-22 20:11:00 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.116 (still bad) 2009-Apr-22 20:11:02 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:11:04 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.114 (still bad) 2009-Apr-22 20:11:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-22 20:11:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:11:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.112 (still bad) 2009-Apr-22 20:11:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:11:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:11:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-22 20:11:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-22 20:11:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:11:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:11:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:11:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:11:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:11:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:11:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:11:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-22 20:11:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:11:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:11:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:11:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:11:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:11:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:11:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:11:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:11:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:11:54 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-22 20:11:54 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 1.068 0.994 1.013 2009-Apr-22 20:11:54 LOG4 check_wapp_levels: WAPP-2 power levels: 0.961 0.933 1.017 1.052 2009-Apr-22 20:11:54 LOG4 check_wapp_levels: WAPP-3 power levels: 1.028 1.109 0.990 1.118 2009-Apr-22 20:11:54 LOG4 check_wapp_levels: WAPP-4 power levels: 1.067 0.100 0.941 0.123 2009-Apr-22 20:11:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:11:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:12:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:12:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:12:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:12:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:12:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:12:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:12:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:12:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-22 20:12:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:12:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:12:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:12:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-22 20:12:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:12:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-22 20:12:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.113 (still bad) 2009-Apr-22 20:12:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:12:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:12:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:12:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:12:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:12:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:12:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-22 20:12:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:12:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:12:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-22 20:12:51 INFO5 check_wapp_levels: WAPP power levels are between 0.099 and 1.118 (still bad) 2009-Apr-22 20:12:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:12:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-22 20:12:55 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 1.072 0.998 1.015 2009-Apr-22 20:12:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.959 0.930 1.021 1.054 2009-Apr-22 20:12:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.031 1.115 0.994 1.121 2009-Apr-22 20:12:55 LOG4 check_wapp_levels: WAPP-4 power levels: 1.070 0.100 0.943 0.123 2009-Apr-22 20:12:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:12:59 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:13:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:13:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:13:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-22 20:13:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:13:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:13:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:13:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:13:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:13:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-22 20:13:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:13:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:13:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:13:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:13:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:13:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:13:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:13:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:13:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:13:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:13:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:13:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-22 20:13:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:13:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:13:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:13:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:13:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:13:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-22 20:13:56 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-22 20:13:56 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 1.070 0.997 1.014 2009-Apr-22 20:13:56 LOG4 check_wapp_levels: WAPP-2 power levels: 0.968 0.939 1.019 1.061 2009-Apr-22 20:13:56 LOG4 check_wapp_levels: WAPP-3 power levels: 1.027 1.109 0.993 1.118 2009-Apr-22 20:13:56 LOG4 check_wapp_levels: WAPP-4 power levels: 1.068 0.100 0.939 0.123 2009-Apr-22 20:13:58 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:14:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:14:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:14:04 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:14:06 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-22 20:14:08 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:14:10 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:14:12 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:14:14 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:14:16 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:14:18 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:14:20 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:14:22 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:14:24 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:14:26 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:14:28 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.114 (still bad) 2009-Apr-22 20:14:30 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:14:32 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:14:34 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.115 (still bad) 2009-Apr-22 20:14:36 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:14:38 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:14:40 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:14:42 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:14:44 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:14:46 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:14:48 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-22 20:14:50 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:14:52 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:14:54 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.145 (still bad) 2009-Apr-22 20:14:56 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.165 (still bad) 2009-Apr-22 20:14:58 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-22 20:14:58 LOG4 check_wapp_levels: WAPP-1 power levels: 1.011 1.071 0.998 1.019 2009-Apr-22 20:14:58 LOG4 check_wapp_levels: WAPP-2 power levels: 0.956 0.928 1.018 1.062 2009-Apr-22 20:14:58 LOG4 check_wapp_levels: WAPP-3 power levels: 1.026 1.107 0.991 1.119 2009-Apr-22 20:14:58 LOG4 check_wapp_levels: WAPP-4 power levels: 1.185 0.100 1.042 0.123 2009-Apr-22 20:15:00 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.198 (still bad) 2009-Apr-22 20:15:02 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.192 (still bad) 2009-Apr-22 20:15:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.179 (still bad) 2009-Apr-22 20:15:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.157 (still bad) 2009-Apr-22 20:15:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-22 20:15:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:15:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-22 20:15:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-22 20:15:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-22 20:15:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.129 (still bad) 2009-Apr-22 20:15:21 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-22 20:15:23 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-22 20:15:25 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-22 20:15:27 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-22 20:15:29 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:15:31 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-22 20:15:33 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:15:35 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:15:37 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-22 20:15:39 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-22 20:15:41 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-22 20:15:43 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-22 20:15:45 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-22 20:15:47 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.121 (still bad) 2009-Apr-22 20:15:49 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.123 (still bad) 2009-Apr-22 20:15:51 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:15:53 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.120 (still bad) 2009-Apr-22 20:15:55 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.126 (still bad) 2009-Apr-22 20:15:57 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:15:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.100 < 0.75)! 2009-Apr-22 20:15:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 1.068 0.996 1.013 2009-Apr-22 20:15:59 LOG4 check_wapp_levels: WAPP-2 power levels: 0.965 0.932 1.018 1.064 2009-Apr-22 20:15:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.026 1.109 0.990 1.116 2009-Apr-22 20:15:59 LOG4 check_wapp_levels: WAPP-4 power levels: 1.066 0.100 0.939 0.123 2009-Apr-22 20:16:01 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:16:03 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.116 (still bad) 2009-Apr-22 20:16:05 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:16:07 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.125 (still bad) 2009-Apr-22 20:16:09 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.117 (still bad) 2009-Apr-22 20:16:11 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.119 (still bad) 2009-Apr-22 20:16:13 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.122 (still bad) 2009-Apr-22 20:16:15 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:16:17 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.118 (still bad) 2009-Apr-22 20:16:19 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-22 20:16:19 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-22 20:16:19 LOG5 end_task: Level: (3) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-22 20:16:19 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-22 20:16:19 LOG5 end_task: Level: (2) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-22 20:16:19 LOG1 fixed_driftmap: New position: year = 2009.3089518531194 RA = 09:53:29.9 RA/Dec = 09:54:02.6 +21:00:13.6 2009-Apr-22 20:16:19 NOTE fixed_driftmap: Correcting ZA to 2:38:59.9 ... 2009-Apr-22 20:16:19 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.6499764008 -CF 2009-Apr-22 20:16:19 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-22 20:16:19 START begin_task: Starting task 'WAPP calibration' 2009-Apr-22 20:16:19 LOG5 begin_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-22 20:16:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-22 20:16:19 START begin_task: Starting task 'selecting calibration type' 2009-Apr-22 20:16:19 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-22 20:16:19 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-22 20:16:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-22 20:16:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 20:16:19 START begin_task: Starting task 'waiting on setcal' 2009-Apr-22 20:16:19 LOG5 begin_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-22 20:16:19 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.6499764008 -CF 2009-Apr-22 20:16:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 20:16:19 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-22 20:16:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-22 20:16:19 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 20:16:19 INFO5 check_wapp_levels: WAPP power levels are between 0.100 and 1.124 (still bad) 2009-Apr-22 20:16:19 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-22 20:16:19 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-22 20:16:19 LOG5 end_task: Level: (4) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-22 20:16:19 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-22 20:16:19 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-22 20:16:19 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-22 20:16:19 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-22 20:16:19 LOG5 begin_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-22 20:16:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-22 20:16:20 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-22 20:16:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-22 20:16:20 LOG5 end_task: Level: (4) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-22 20:16:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-22 20:16:20 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-22 20:16:20 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-22 20:16:20 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-22 20:16:20 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-22 20:16:20 LOG5 begin_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-22 20:16:20 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-22 20:16:20 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-22 20:16:20 LOG5 end_task: Level: (4) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-22 20:16:20 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-22 20:16:20 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-22 20:16:20 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-22 20:16:20 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-22 20:16:20 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-22 20:16:20 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-22 20:16:20 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-22 20:16:20 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-22 20:16:20 LOG5 begin_task: Level: (3) ID = <10175> Status = 0 0 0 0 ok 2009-Apr-22 20:16:20 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-22 20:16:20 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-22 20:16:20 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-22 20:1