2009-Apr-20 19:14:26 BEGIN executive: CIMA executive starting ... 2009-Apr-20 19:14:26 NOTE executive: STARTING NEW CIMA SESSION 2009-Apr-20 19:14:26 INFO1 executive: Using CIMA version 3.1.03 'smart' from 2009-01-20 13:50 2009-Apr-20 19:14:26 INFO4 executive: This is an ON-LINE session 2009-Apr-20 19:14:26 INFO4 executive: This is a LOCAL session 2009-Apr-20 19:14:26 INFO5 executive: All entries in the log-file are timestamped in AST ( = UTC - 4 hours ) 2009-Apr-20 19:14:26 INFO1 executive: CIMA session for project 'a2010' in 'line' mode for 'Betsey Adams' 2009-Apr-20 19:14:26 INFO2 executive: Logging to '/share/obs4/usr/a2010/a2010.cimalog_20090420' 2009-Apr-20 19:14:27 LOG2 log_preferences: Currently applied preferences: 2009-Apr-20 19:14:27 LOG2 log_preferences: prefs(dailylog) = daily 2009-Apr-20 19:14:27 LOG2 log_preferences: prefs(offlinelog) = skip 2009-Apr-20 19:14:27 LOG2 log_preferences: prefs(datawindow) = open 2009-Apr-20 19:14:27 LOG2 log_preferences: prefs(limitwarning) = enabled 2009-Apr-20 19:14:27 LOG2 log_preferences: prefs(wappfailure) = abort 2009-Apr-20 19:14:27 LOG2 log_preferences: prefs(helpstyle) = stay-open 2009-Apr-20 19:14:27 LOG2 log_preferences: prefs(logcolours) = full 2009-Apr-20 19:14:27 LOG2 log_preferences: prefs(displaylevel) = INFO5 2009-Apr-20 19:14:27 LOG2 log_preferences: prefs(loglevel) = LOG5 2009-Apr-20 19:14:27 LOG2 log_preferences: prefs(displayformat) = long 2009-Apr-20 19:14:27 LOG2 log_preferences: prefs(logformat) = new 2009-Apr-20 19:14:27 LOG2 log_preferences: prefs(fontsize) = 3 2009-Apr-20 19:14:27 LOG3 vw_send: To DATATAKING: source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-20 19:14:27 LOG3 vw_send: To DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-20 19:14:27 ALERT executive: CIMA executive ready 2009-Apr-20 19:14:28 NOTE frontend: CIMA frontend ready 2009-Apr-20 19:14:31 COMMAND CIMA-send_to_exec: Sending command to select new receiver 2009-Apr-20 19:14:31 LOG4 exec_msg: From OBSERVER: select_receiver alfa no no yes 2009-Apr-20 19:14:31 LOG1 select_receiver: Calling 'select_receiver alfa no no yes' 2009-Apr-20 19:14:31 BEGIN begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-20 19:14:31 LOG5 begin_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-20 19:14:31 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-20 19:14:31 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-20 19:14:31 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-20 19:14:31 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-20 19:14:31 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-20 19:14:31 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-20 19:14:31 LOG5 finish_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-20 19:14:31 DONE finish_task: DONE finished selecting: receiver ALFA 2009-Apr-20 19:14:31 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:14:31 END end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-20 19:14:31 LOG5 end_task: Level: (1) ID = <10001> Status = 0 0 0 0 ok 2009-Apr-20 19:14:31 LOG4 got_cormsg: From DATATAKING: vw% setup 2009-Apr-20 19:14:37 LOG4 got_cormsg: From DATATAKING: mcpSetupCmd: prg tpProg err 0xd 2009-Apr-20 19:14:37 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpSetupCmd: prg tpProg err 0xd' 2009-Apr-20 19:14:37 LOG4 got_cormsg: From DATATAKING: vw% io 2009-Apr-20 19:14:37 LOG4 got_cormsg: From DATATAKING: tapeIo Off discIo Off gioIo Off 2009-Apr-20 19:14:37 LOG4 got_cormsg: From DATATAKING: 2009-Apr-20 19:14:37 LOG4 got_cormsg: From DATATAKING: vw% tape stat 2009-Apr-20 19:14:38 LOG4 got_cormsg: From DATATAKING: mcpTapeCmd: err 0xd0003 2009-Apr-20 19:14:38 LOG1 got_cormsg: Start-up error message from DATATAKING: 'mcpTapeCmd: err 0xd0003' 2009-Apr-20 19:14:38 LOG4 got_cormsg: From DATATAKING: vw% connectall 2009-Apr-20 19:14:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@cor 2009-Apr-20 19:14:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@corp1 2009-Apr-20 19:14:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@pnt 2009-Apr-20 19:14:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@da 2009-Apr-20 19:14:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap1 2009-Apr-20 19:14:38 LOG4 got_cormsg: From DATATAKING: connected : prgMgr@dap2 2009-Apr-20 19:14:38 LOG4 got_cormsg: From DATATAKING: vw% online.. exit cmd to quit. 2009-Apr-20 19:14:38 LOG4 got_cormsg: From DATATAKING: vw% source /share/obs4/usr/aoui/psriflo.tcl 2009-Apr-20 19:14:38 LOG4 got_cormsg: From DATATAKING: cd /share/obs4/usr/a2010 2009-Apr-20 19:14:38 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-20 19:14:38 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-20 19:14:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:14:38 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:14:45 LOG4 got_cormsg: From DATATAKING: waiting for turret position:26.64 2009-Apr-20 19:15:05 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Apr-20 19:15:05 LOG4 exec_msg: From OBSERVER: track_new_source galfasrc 085200.0 +211730 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Apr-20 19:15:05 LOG1 track_new_source: Calling 'track_new_source galfasrc 085200.0 +211730 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Apr-20 19:15:05 BEGIN begin_task: Starting task 'selecting new source' 2009-Apr-20 19:15:05 LOG5 begin_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-20 19:15:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Selecting source 'galfasrc' ...} 2009-Apr-20 19:15:05 LOG3 track_source: Calling 'track_source galfasrc 085200.0 +211730 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-20 19:15:05 START begin_task: Starting task 'sending tracking commands' 2009-Apr-20 19:15:05 LOG5 begin_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-20 19:15:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Apr-20 19:15:05 INFO1 track_source: Starting to track galfasrc 2009-Apr-20 19:15:05 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-20 19:15:05 LOG3 vw_send: To DATATAKING: set ra 085200.0 2009-Apr-20 19:15:05 LOG3 vw_send: To DATATAKING: set dec +211730 2009-Apr-20 19:15:05 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-20 19:15:05 LOG3 vw_send: To DATATAKING: pnt tr 085200.0 +211730 -CJ 2009-Apr-20 19:15:05 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-20 19:15:05 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-20 19:15:05 LOG5 finish_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-20 19:15:05 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-20 19:15:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:15:05 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-20 19:15:05 LOG5 end_task: Level: (2) ID = <10003> Status = 0 0 0 0 ok 2009-Apr-20 19:15:05 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Apr-20 19:15:05 START begin_task: Starting task 'applying pointing corrections' 2009-Apr-20 19:15:05 LOG5 begin_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-20 19:15:05 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Apr-20 19:15:05 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-20 19:15:05 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Apr-20 19:15:05 LOG5 finish_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-20 19:15:05 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Apr-20 19:15:05 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:15:05 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Apr-20 19:15:05 LOG5 end_task: Level: (2) ID = <10004> Status = 0 0 0 0 ok 2009-Apr-20 19:15:05 STOP finish_task: Finishing task 'selecting new source' 2009-Apr-20 19:15:05 LOG5 finish_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-20 19:15:05 DONE finish_task: DONE finished selecting: new source 2009-Apr-20 19:15:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:15:05 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Apr-20 19:15:05 LOG5 end_task: Level: (1) ID = <10002> Status = 0 0 0 0 ok 2009-Apr-20 19:15:05 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-20 19:15:05 LOG4 got_cormsg: From DATATAKING: set ra 085200.0 2009-Apr-20 19:15:05 LOG4 got_cormsg: From DATATAKING: set dec +211730 2009-Apr-20 19:15:05 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-20 19:15:05 LOG4 got_cormsg: From DATATAKING: pnt tr 085200.0 +211730 -CJ 2009-Apr-20 19:15:05 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-20 19:15:05 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-20 19:15:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:15:21 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:15:21 LOG4 got_cormsg: From DATATAKING: vw% 085200.0 2009-Apr-20 19:15:21 LOG4 got_cormsg: From DATATAKING: vw% +211730 2009-Apr-20 19:15:21 LOG4 got_cormsg: From DATATAKING: vw% vw% vw% vw% vw% 2009-Apr-20 19:17:59 COMMAND CIMA-send_to_exec: Sending command to point to a source 2009-Apr-20 19:18:00 LOG4 exec_msg: From OBSERVER: track_new_source galfasrc 085200.0 +211730 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0 2009-Apr-20 19:18:00 LOG1 track_new_source: Calling 'track_new_source galfasrc 085200.0 +211730 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical) 0 0 0 0 0' 2009-Apr-20 19:18:00 BEGIN begin_task: Starting task 'selecting new source' 2009-Apr-20 19:18:00 LOG5 begin_task: Level: (1) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-20 19:18:00 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Selecting source 'galfasrc' ...} 2009-Apr-20 19:18:00 LOG3 track_source: Calling 'track_source galfasrc 085200.0 +211730 J 0 0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-20 19:18:00 START begin_task: Starting task 'sending tracking commands' 2009-Apr-20 19:18:00 LOG5 begin_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-20 19:18:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Apr-20 19:18:00 INFO1 track_source: Starting to track galfasrc 2009-Apr-20 19:18:00 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-20 19:18:00 LOG3 vw_send: To DATATAKING: set ra 085200.0 2009-Apr-20 19:18:00 LOG3 vw_send: To DATATAKING: set dec +211730 2009-Apr-20 19:18:00 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-20 19:18:00 LOG3 vw_send: To DATATAKING: pnt tr 085200.0 +211730 -CJ 2009-Apr-20 19:18:00 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-20 19:18:00 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-20 19:18:00 LOG5 finish_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-20 19:18:00 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-20 19:18:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:18:00 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-20 19:18:00 LOG5 end_task: Level: (2) ID = <10006> Status = 0 0 0 0 ok 2009-Apr-20 19:18:00 LOG4 apply_pointing_corr: Calling 'apply_pointing_corr 0 0 0 0 0' 2009-Apr-20 19:18:00 START begin_task: Starting task 'applying pointing corrections' 2009-Apr-20 19:18:00 LOG5 begin_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-20 19:18:00 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Applying Pointing Corrections} INFO {Applying pointing corrections ...} 2009-Apr-20 19:18:00 LOG3 vw_send: To DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-20 19:18:00 STOP finish_task: Finishing task 'applying pointing corrections' 2009-Apr-20 19:18:00 LOG5 finish_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-20 19:18:00 INFO2 finish_task: DONE finished applying: pointing corrections 2009-Apr-20 19:18:00 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:18:00 STOP end_task: Finishing task 'applying pointing corrections' with status 'OK' 2009-Apr-20 19:18:00 LOG5 end_task: Level: (2) ID = <10007> Status = 0 0 0 0 ok 2009-Apr-20 19:18:00 STOP finish_task: Finishing task 'selecting new source' 2009-Apr-20 19:18:00 LOG5 finish_task: Level: (1) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-20 19:18:00 DONE finish_task: DONE finished selecting: new source 2009-Apr-20 19:18:00 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:18:00 END end_task: Finishing task 'selecting new source' with status 'OK' 2009-Apr-20 19:18:00 LOG5 end_task: Level: (1) ID = <10005> Status = 0 0 0 0 ok 2009-Apr-20 19:18:00 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-20 19:18:00 LOG4 got_cormsg: From DATATAKING: set ra 085200.0 2009-Apr-20 19:18:00 LOG4 got_cormsg: From DATATAKING: set dec +211730 2009-Apr-20 19:18:00 LOG4 got_cormsg: From DATATAKING: vw% 085200.0 2009-Apr-20 19:18:00 LOG4 got_cormsg: From DATATAKING: vw% +211730 2009-Apr-20 19:18:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:18:00 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-20 19:18:00 LOG4 got_cormsg: From DATATAKING: pnt tr 085200.0 +211730 -CJ 2009-Apr-20 19:18:00 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-20 19:18:00 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-20 19:18:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:18:00 LOG4 got_cormsg: From DATATAKING: pnt cor setoff 0.0 0.0 2009-Apr-20 19:18:00 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:04 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-20 19:19:04 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-20 19:19:05 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-20 19:19:05 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-20 19:19:05 LOG5 begin_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-20 19:19:05 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-20 19:19:05 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-20 19:19:05 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-20 19:19:05 LOG5 end_task: Level: (1) ID = <10008> Status = 0 0 0 0 ok 2009-Apr-20 19:19:05 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-20 19:19:12 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-20 19:19:12 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-20 19:19:12 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-20 19:19:12 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-20 19:19:33 INFO4 CIMA-load_command_file: Loaded command file 'command_galfasrc09.cmd' 2009-Apr-20 19:19:35 INFO1 CIMA-run_command_file: Transferring command file 'command_galfasrc09.cmd' to executive ... 2009-Apr-20 19:19:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 1 5 {LOAD togs_09.conf} 2009-Apr-20 19:19:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 2 6 {CATALOG a2010.cat} 2009-Apr-20 19:19:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 3 7 {GOTO galfasrc} 2009-Apr-20 19:19:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 4 8 {ALFAANGLE 19} 2009-Apr-20 19:19:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 5 9 {WAITTRACK} 2009-Apr-20 19:19:35 LOG4 exec_msg: From OBSERVER: store_command_file_line 6 13 {SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}} 2009-Apr-20 19:19:35 COMMAND CIMA-send_to_exec: Sending command to run command file 2009-Apr-20 19:19:35 LOG4 exec_msg: From OBSERVER: run_command_file command_galfasrc09.cmd 1 1 6 2009-Apr-20 19:19:35 LOG4 run_command_file: Calling 'run_command_file command_galfasrc09.cmd 1 1 6' 2009-Apr-20 19:19:35 BEGIN begin_task: Starting task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-20 19:19:35 LOG5 begin_task: Level: (1) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-20 19:19:35 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} INFO {Running command file 'command_galfasrc09.cmd' ...} 2009-Apr-20 19:19:35 NOTE run_command_file: Starting execution of command file 'command_galfasrc09.cmd' from line 1 2009-Apr-20 19:19:35 COMMAND run_command_line: EXECUTING command 5: 'LOAD togs_09.conf' 2009-Apr-20 19:19:35 LOG1 execute_load: Waiting for CIMA frontend to check the IF/LO file 2009-Apr-20 19:19:35 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-20 19:19:36 LOG1 execute_load: Waiting for CIMA frontend to load the IF/LO file 2009-Apr-20 19:19:36 NOTE CIMA-load_config_file: Loading configuration file 'togs_09.conf' 2009-Apr-20 19:19:36 LOG2 CIMA-antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30337 J 2009-Apr-20 19:19:36 LOG2 CIMA-antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:19:36 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 83975 2009 110 0.0 2009-Apr-20 19:19:36 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-20 19:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-20 19:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-20 19:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-20 19:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-20 19:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "no" 2009-Apr-20 19:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-20 19:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-20 19:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-20 19:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-20 19:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-20 19:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-20 19:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-20 19:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-20 19:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-20 19:19:36 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP+GALFA" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-20 19:19:37 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-20 19:19:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-20 19:19:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-20 19:19:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-20 19:19:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-20 19:19:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-20 19:19:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-20 19:19:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-20 19:19:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-20 19:19:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-20 19:19:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-20 19:19:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-20 19:19:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-20 19:19:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-20 19:19:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-20 19:19:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-20 19:19:38 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-20 19:19:38 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-20 19:19:38 LOG5 begin_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-20 19:19:38 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-20 19:19:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-20 19:19:38 INFO1 config_iflo: Selecting receiver ALFA 2009-Apr-20 19:19:38 LOG4 send_obs_status: To obs_status: <1> INFO {Selecting receiver ALFA} 2009-Apr-20 19:19:38 LOG1 select_receiver: Calling 'select_receiver alfa no no no' 2009-Apr-20 19:19:38 START begin_task: Starting task 'selecting receiver ALFA' 2009-Apr-20 19:19:38 LOG5 begin_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-20 19:19:38 NOTE select_receiver: Starting to select receiver ALFA 2009-Apr-20 19:19:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Receiver Selection} TOTALLOOPS 1 TASKWAIT BITMAP stat_alfa_rot INFO {Selecting receiver ALFA ...} 2009-Apr-20 19:19:38 LOG3 vw_send: To DATATAKING: setupall alfa 1375.0 2009-Apr-20 19:19:38 LOG3 vw_send: To DATATAKING: acvlbical off 2009-Apr-20 19:19:38 NOTE select_receiver: Don't forget to choose a source after receiver selection! 2009-Apr-20 19:19:38 STOP finish_task: Finishing task 'selecting receiver ALFA' 2009-Apr-20 19:19:38 LOG5 finish_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-20 19:19:38 INFO2 finish_task: DONE finished selecting: receiver ALFA 2009-Apr-20 19:19:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:19:38 STOP end_task: Finishing task 'selecting receiver ALFA' with status 'OK' 2009-Apr-20 19:19:38 LOG5 end_task: Level: (3) ID = <10011> Status = 0 0 0 0 ok 2009-Apr-20 19:19:38 START begin_task: Starting task 'waiting for receiver ALFA' 2009-Apr-20 19:19:38 LOG5 begin_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-20 19:19:38 STOP end_task: Finishing task 'waiting for receiver ALFA' with status 'OK' 2009-Apr-20 19:19:38 LOG5 end_task: Level: (3) ID = <10012> Status = 0 0 0 0 ok 2009-Apr-20 19:19:38 INFO1 config_iflo: Configuring rest of the IF/LO path 2009-Apr-20 19:19:38 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_iflo INFO {Configuring rest of the IF/LO path} 2009-Apr-20 19:19:38 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-20 19:19:38 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:19:38 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-20 19:19:38 LOG5 begin_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-20 19:19:38 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-20 19:19:38 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-20 19:19:38 LOG5 end_task: Level: (3) ID = <10013> Status = 0 0 0 0 ok 2009-Apr-20 19:19:38 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-20 19:19:38 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:19:38 LOG3 vw_send: To DATATAKING: alfafb 1 2009-Apr-20 19:19:38 LOG3 vw_send: To DATATAKING: if1 {if1_sbshcl T} 2009-Apr-20 19:19:39 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-20 19:19:39 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if1 {if1_zmnormal T} 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if1 {if1_ifnum 6} 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if1 {if1_fiber T} 2009-Apr-20 19:19:39 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-20 19:19:39 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-20 19:19:39 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-20 19:19:39 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-20 19:19:39 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if1 {if1_2to12wb F} 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if2 {if2_xfnormal T} 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-20 19:19:39 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if2 {if2_calsrc 3} 2009-Apr-20 19:19:39 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-20 19:19:39 LOG3 vw_send: To DATATAKING: if2 {if2_430blnk F} 2009-Apr-20 19:19:39 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-20 19:19:39 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:19:39 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-20 19:19:39 LOG5 begin_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: setupall alfa 1375.0 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: acvlbical off 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: alfafb 1 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_sbshcl T} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_zmnormal T} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_rfattn 11 11} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifnum 6} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_ifattn 0 0} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_fiber T} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_2to12wb F} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if1 {if1_calrcvr 15} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_xfnormal T} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_sigsrc gr} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_inpfrq alfa} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_mixer 750 750 750 750 750 750 750 750} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_syndest 3 3 3 3 3 3 3 3} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_calsrc 3} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_vis30mhz gr} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: if2 {if2_430blnk F} 2009-Apr-20 19:19:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:19:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:48 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:55 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:19:55 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-20 19:19:55 LOG5 end_task: Level: (3) ID = <10014> Status = 0 0 0 0 ok 2009-Apr-20 19:19:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-20 19:19:55 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-20 19:19:55 LOG5 finish_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-20 19:19:55 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-20 19:19:55 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:19:56 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-20 19:19:56 LOG5 end_task: Level: (2) ID = <10010> Status = 0 0 0 0 ok 2009-Apr-20 19:19:56 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-20 19:19:56 LOG5 begin_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-20 19:19:56 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-20 19:19:56 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-20 19:19:56 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-20 19:19:56 START begin_task: Starting task 'selecting calibration port' 2009-Apr-20 19:19:56 LOG5 begin_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-20 19:19:56 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-20 19:19:56 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-20 19:19:56 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:19:56 START begin_task: Starting task 'waiting on calport' 2009-Apr-20 19:19:56 LOG5 begin_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-20 19:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:56 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-20 19:19:56 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:56 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:19:56 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-20 19:19:56 LOG5 end_task: Level: (4) ID = <10017> Status = 0 0 0 0 ok 2009-Apr-20 19:19:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-20 19:19:56 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-20 19:19:56 LOG5 end_task: Level: (3) ID = <10016> Status = 0 0 0 0 ok 2009-Apr-20 19:19:56 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-20 19:19:56 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-20 19:19:56 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-20 19:19:56 LOG5 begin_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-20 19:19:56 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-20 19:19:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:56 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-20 19:19:56 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-20 19:19:56 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-20 19:19:56 LOG5 end_task: Level: (3) ID = <10018> Status = 0 0 0 0 ok 2009-Apr-20 19:19:56 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-20 19:19:56 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-20 19:19:56 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-20 19:19:56 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-20 19:19:56 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-20 19:19:56 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-20 19:19:56 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-20 19:19:56 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-20 19:19:56 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-20 19:19:56 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-20 19:19:56 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-20 19:19:56 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-20 19:19:57 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-20 19:19:57 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-20 19:19:57 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-20 19:19:57 LOG5 begin_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-20 19:19:57 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-20 19:19:57 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-20 19:19:57 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-20 19:19:57 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-20 19:19:57 LOG5 end_task: Level: (3) ID = <10019> Status = 0 0 0 0 ok 2009-Apr-20 19:19:57 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-20 19:19:57 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-20 19:19:57 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-20 19:19:57 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-20 19:19:57 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-20 19:19:57 LOG5 finish_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-20 19:19:57 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-20 19:19:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:19:57 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-20 19:19:57 LOG5 end_task: Level: (2) ID = <10015> Status = 0 0 0 0 ok 2009-Apr-20 19:19:57 COMMAND run_command_line: EXECUTING command 6: 'CATALOG a2010.cat' 2009-Apr-20 19:19:57 INFO1 execute_catalog: Selecting new catalog '/share/obs4/usr/a2010/a2010.cat' 2009-Apr-20 19:19:57 COMMAND run_command_line: EXECUTING command 7: 'GOTO galfasrc' 2009-Apr-20 19:19:57 LOG4 goto_source: Calling 'goto_source /share/obs4/usr/a2010/a2010.cat galfasrc nooffset nowait' 2009-Apr-20 19:19:57 BEGIN begin_task: Starting task 'tracking source 'galfasrc'' 2009-Apr-20 19:19:57 LOG5 begin_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-20 19:19:57 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Tracking Source} INFO {Tracking source 'galfasrc' ...} 2009-Apr-20 19:19:58 LOG3 track_source: Calling 'track_source galfasrc 085200.0 +211730 J 0.0 0.0 main small /share/obs4/usr/a2010/a2010.cat 0 Topocentric velocity(optical)' 2009-Apr-20 19:19:58 START begin_task: Starting task 'sending tracking commands' 2009-Apr-20 19:19:58 LOG5 begin_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-20 19:19:58 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {galfasrc} INFO {Slewing to source 'galfasrc' ...} 2009-Apr-20 19:19:58 INFO1 track_source: Starting to track galfasrc 2009-Apr-20 19:19:58 LOG3 vw_send: To DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-20 19:19:58 LOG3 vw_send: To DATATAKING: set ra 085200.0 2009-Apr-20 19:19:58 LOG3 vw_send: To DATATAKING: set dec +211730 2009-Apr-20 19:19:58 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-20 19:19:58 LOG3 vw_send: To DATATAKING: pnt tr 085200.0 +211730 -CJ 2009-Apr-20 19:19:58 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-20 19:19:58 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-20 19:19:58 LOG5 finish_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-20 19:19:58 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-20 19:19:58 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:19:58 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-20 19:19:58 LOG5 end_task: Level: (3) ID = <10021> Status = 0 0 0 0 ok 2009-Apr-20 19:19:58 STOP finish_task: Finishing task 'tracking source 'galfasrc'' 2009-Apr-20 19:19:58 LOG5 finish_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-20 19:19:58 DONE finish_task: DONE finished tracking: source 'galfasrc' 2009-Apr-20 19:19:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:19:58 END end_task: Finishing task 'tracking source 'galfasrc'' with status 'OK' 2009-Apr-20 19:19:58 LOG5 end_task: Level: (2) ID = <10020> Status = 0 0 0 0 ok 2009-Apr-20 19:19:58 COMMAND run_command_line: EXECUTING command 8: 'ALFAANGLE 19' 2009-Apr-20 19:19:58 INFO1 execute_alfaangle: Setting the ALFA rotation angle to 19 2009-Apr-20 19:19:58 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-20 19:19:58 LOG5 begin_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-20 19:19:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-20 19:19:58 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-20 19:19:58 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-20 19:19:58 LOG4 send_obs_status: To obs_status: <1> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-20 19:19:58 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-20 19:19:58 LOG5 begin_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-20 19:19:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-20 19:19:58 NOTE WAPPDATA-new_file: New FITS file: wapp.20090420.a2010.0014.fits 2009-Apr-20 19:19:58 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "galfasrc" 2009-Apr-20 19:19:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-20 19:19:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-20 19:19:58 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090420.a2010.0014.fits} 2009-Apr-20 19:19:58 LOG4 got_cormsg: From DATATAKING: set ra 085200.0 2009-Apr-20 19:19:58 LOG4 got_cormsg: From DATATAKING: set dec +211730 2009-Apr-20 19:19:58 LOG4 got_cormsg: From DATATAKING: vw% 085200.0 2009-Apr-20 19:19:58 LOG4 got_cormsg: From DATATAKING: vw% +211730 2009-Apr-20 19:19:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:58 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-20 19:19:58 LOG4 got_cormsg: From DATATAKING: pnt tr 085200.0 +211730 -CJ 2009-Apr-20 19:19:58 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-20 19:19:58 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-20 19:19:58 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:19:58 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-20 19:20:05 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-20 19:20:05 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-20 19:20:05 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-20 19:20:05 LOG5 end_task: Level: (3) ID = <10023> Status = 0 0 0 0 ok 2009-Apr-20 19:20:05 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-20 19:20:05 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-20 19:20:05 LOG5 finish_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-20 19:20:05 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-20 19:20:05 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:20:05 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-20 19:20:05 LOG5 end_task: Level: (2) ID = <10022> Status = 0 0 0 0 ok 2009-Apr-20 19:20:05 COMMAND run_command_line: EXECUTING command 9: 'WAITTRACK' 2009-Apr-20 19:20:05 BEGIN begin_task: Starting task 'waiting on telescope' 2009-Apr-20 19:20:05 LOG5 begin_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-20 19:20:05 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-20 19:20:05 LOG3 waittrk: Start waittrk 5 2009-Apr-20 19:20:05 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-20 19:20:05 LOG5 begin_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-20 19:20:10 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-20 19:20:10 LOG5 end_task: Level: (3) ID = <10025> Status = 0 0 0 0 ok 2009-Apr-20 19:20:10 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-20 19:20:10 LOG5 begin_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-20 19:20:16 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-20 19:20:16 LOG5 end_task: Level: (3) ID = <10026> Status = 0 0 0 0 ok 2009-Apr-20 19:20:16 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-20 19:20:16 INFO2 waittrk: Now tracking galfasrc 2009-Apr-20 19:20:16 LOG4 waittrk: Current telescope position: Az = 191.49 ZA = 2.98 2009-Apr-20 19:20:16 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-20 19:20:16 LOG5 finish_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-20 19:20:16 DONE finish_task: DONE finished waiting: telescope on source 2009-Apr-20 19:20:16 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:20:16 END end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-20 19:20:16 LOG5 end_task: Level: (2) ID = <10024> Status = 0 0 0 0 ok 2009-Apr-20 19:20:16 COMMAND run_command_line: EXECUTING command 13: 'SMARTFREQ secs=10 loops=2 caltype=hcorcal adjpwr=first newfile=one freqs={1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-20 19:20:16 LOG2 check_obsmode: Waiting for CIMA frontend to check the options for 'smart frequency switching' 2009-Apr-20 19:20:17 LOG4 exec_msg: From OBSERVER: global comfile ; set comfile(frontend_status) ok 2009-Apr-20 19:20:17 LOG1 smartfreq: Calling 'smartfreq 2 10 hcorcal first one {1380.60607910 1383.34045410 1383.53576660 1384.12170410 1385.29357910 1385.68420410 1386.66076660}' 2009-Apr-20 19:20:17 BEGIN begin_task: Starting task 'smart frequency switching' 2009-Apr-20 19:20:17 LOG5 begin_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-20 19:20:17 INFO4 begin_task: MAKING 'smart frequency switching' using 'alfa' + 'WAPP+GALFA' on 'galfasrc' 2009-Apr-20 19:20:17 INFO1 smartfreq: Starting pattern: Smart frequency switching 2009-Apr-20 19:20:17 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Smart frequency switching} TOTALLOOPS 2 INFO {Starting smart frequency switching obs. ...} 2009-Apr-20 19:20:17 START begin_task: Starting task 'selecting calibration type' 2009-Apr-20 19:20:17 LOG5 begin_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-20 19:20:17 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-20 19:20:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-20 19:20:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:20:17 START begin_task: Starting task 'waiting on setcal' 2009-Apr-20 19:20:17 LOG5 begin_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-20 19:20:17 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-20 19:20:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:20:17 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:20:17 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:20:17 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-20 19:20:17 LOG5 end_task: Level: (4) ID = <10029> Status = 0 0 0 0 ok 2009-Apr-20 19:20:17 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-20 19:20:17 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-20 19:20:18 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-20 19:20:18 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-20 19:20:18 LOG5 begin_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-20 19:20:18 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:20:18 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-20 19:20:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-20 19:20:18 LOG5 end_task: Level: (4) ID = <10030> Status = 0 0 0 0 ok 2009-Apr-20 19:20:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-20 19:20:18 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-20 19:20:18 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-20 19:20:18 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:20:18 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-20 19:20:18 LOG5 begin_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-20 19:20:18 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-20 19:20:18 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-20 19:20:18 LOG5 end_task: Level: (4) ID = <10031> Status = 0 0 0 0 ok 2009-Apr-20 19:20:18 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-20 19:20:18 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:20:18 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-20 19:20:18 LOG5 end_task: Level: (3) ID = <10028> Status = 0 0 0 0 ok 2009-Apr-20 19:20:18 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-20 19:20:18 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-20 19:20:18 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-20 19:20:18 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-20 19:20:18 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090420.a2010.0014.fits' is empty! 2009-Apr-20 19:20:18 INFO2 smartfreq: Starting smart frequency switching loop 1 of 2 2009-Apr-20 19:20:18 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-20 19:20:18 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-20 19:20:18 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-20 19:20:18 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-20 19:20:18 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-20 19:20:18 LOG5 begin_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-20 19:20:19 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-20 19:20:19 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-20 19:20:19 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-20 19:20:19 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-20 19:20:19 LOG5 end_task: Level: (3) ID = <10032> Status = 0 0 0 0 ok 2009-Apr-20 19:20:19 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-20 19:20:19 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:20:19 LOG5 begin_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-20 19:20:19 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-20 19:20:19 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-20 19:20:19 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-20 19:20:19 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-20 19:20:19 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:20:19 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-20 19:20:19 LOG5 begin_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-20 19:20:19 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-20 19:20:19 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:20:19 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-20 19:20:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:20:22 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:20:22 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-20 19:20:22 LOG5 end_task: Level: (4) ID = <10034> Status = 0 0 0 0 ok 2009-Apr-20 19:20:22 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-20 19:20:22 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:20:22 LOG5 begin_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-20 19:20:22 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-20 19:20:22 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:20:22 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:20:22 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:20:22 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:20:22 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-20 19:20:22 LOG5 begin_task: Level: (5) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-20 19:20:22 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:20:22 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-20 19:20:22 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-20 19:20:22 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2009-Apr-20 19:20:22 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 3 dB 2009-Apr-20 19:20:22 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-20 19:20:22 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-20 19:20:22 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-20 19:20:22 LOG5 end_task: Level: (5) ID = <10036> Status = 0 0 0 0 ok 2009-Apr-20 19:20:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.023 0.899 ALFA beam 1: 1.055 1.074 2009-Apr-20 19:20:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 0.999 0.953 ALFA beam 3: 1.065 0.881 2009-Apr-20 19:20:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.080 0.918 ALFA beam 5: 1.042 0.967 2009-Apr-20 19:20:22 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.884 0.103 ALFA beam 7: 0.983 0.127 2009-Apr-20 19:20:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:20:22 LOG5 finish_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-20 19:20:22 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-20 19:20:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:20:22 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-20 19:20:22 LOG5 end_task: Level: (4) ID = <10035> Status = 0 0 0 0 ok 2009-Apr-20 19:20:22 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-20 19:20:22 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:20:22 LOG5 finish_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-20 19:20:22 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-20 19:20:22 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:20:23 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-20 19:20:23 LOG5 end_task: Level: (3) ID = <10033> Status = 0 0 0 0 ok 2009-Apr-20 19:20:23 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-20 19:20:23 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-20 19:20:23 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-20 19:20:23 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:20:23 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30337 J 2009-Apr-20 19:20:23 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:20:23 LOG2 antvel: Parameters to Doppler: Topocentric 84022 2009 110 0.0 2009-Apr-20 19:20:23 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:20:23 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-20 19:20:23 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-20 19:20:23 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:20:23 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:20:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-20 19:20:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:20:23 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-20 19:20:23 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:20:23 LOG5 begin_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-20 19:20:23 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-20 19:20:23 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.834020 2009.3033697746343 18.999933 2009-Apr-20 19:20:23 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666628 21.291666666666671 2009-Apr-20 19:20:23 LOG4 log_alfabeam: ALFABEAM 1 8.866352873380210 21.185657176088508 2009-Apr-20 19:20:23 LOG4 log_alfabeam: ALFABEAM 2 8.872139709517022 21.239376736502667 2009-Apr-20 19:20:23 LOG4 log_alfabeam: ALFABEAM 3 8.872605575112818 21.345344409558237 2009-Apr-20 19:20:23 LOG4 log_alfabeam: ALFABEAM 4 8.866892980404673 21.397821062362858 2009-Apr-20 19:20:23 LOG4 log_alfabeam: ALFABEAM 5 8.861011829104831 21.341849540841896 2009-Apr-20 19:20:23 LOG4 log_alfabeam: ALFABEAM 6 8.860937605286168 21.235721184300719 2009-Apr-20 19:20:23 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000192 2009-Apr-20 19:20:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:20:23 LOG5 begin_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-20 19:20:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:20:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-20 19:20:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:20:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:20:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:20:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-20 19:20:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84024.00 2009-Apr-20 19:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:20:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:20:25 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-20 19:20:25 LOG4 check_wapp_levels: WAPP-1 power levels: 1.057 0.925 1.092 1.096 2009-Apr-20 19:20:25 LOG4 check_wapp_levels: WAPP-2 power levels: 1.014 0.980 1.136 0.916 2009-Apr-20 19:20:25 LOG4 check_wapp_levels: WAPP-3 power levels: 1.141 0.957 1.106 1.020 2009-Apr-20 19:20:25 LOG4 check_wapp_levels: WAPP-4 power levels: 0.913 0.106 1.007 0.130 2009-Apr-20 19:20:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.146 (still bad) 2009-Apr-20 19:20:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.140 (still bad) 2009-Apr-20 19:20:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.139 (still bad) 2009-Apr-20 19:20:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.142 (still bad) 2009-Apr-20 19:20:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:20:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:20:34 LOG5 end_task: Level: (4) ID = <10038> Status = 0 0 0 0 ok 2009-Apr-20 19:20:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:20:34 LOG5 end_task: Level: (3) ID = <10037> Status = 0 0 0 0 ok 2009-Apr-20 19:20:34 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-20 19:20:34 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-20 19:20:34 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-20 19:20:34 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:20:34 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30337 J 2009-Apr-20 19:20:34 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:20:34 LOG2 antvel: Parameters to Doppler: Topocentric 84034 2009 110 0.0 2009-Apr-20 19:20:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:20:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-20 19:20:34 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-20 19:20:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:20:34 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:20:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-20 19:20:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:20:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-20 19:20:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:20:34 LOG5 begin_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-20 19:20:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-20 19:20:34 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.837363 2009.3033701548914 18.999933 2009-Apr-20 19:20:34 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666587 21.291666666666671 2009-Apr-20 19:20:34 LOG4 log_alfabeam: ALFABEAM 1 8.866472643931656 21.185601270285940 2009-Apr-20 19:20:34 LOG4 log_alfabeam: ALFABEAM 2 8.872197922603259 21.240589838565139 2009-Apr-20 19:20:34 LOG4 log_alfabeam: ALFABEAM 3 8.872544411442634 21.346646903977405 2009-Apr-20 19:20:34 LOG4 log_alfabeam: ALFABEAM 4 8.866772615273613 21.397857978682243 2009-Apr-20 19:20:34 LOG4 log_alfabeam: ALFABEAM 5 8.860955495491741 21.340590106323678 2009-Apr-20 19:20:34 LOG4 log_alfabeam: ALFABEAM 6 8.861001945869633 21.234458719836550 2009-Apr-20 19:20:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000193 2009-Apr-20 19:20:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:20:35 LOG5 begin_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-20 19:20:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:20:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-20 19:20:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:20:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:20:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:20:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-20 19:20:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84036.00 2009-Apr-20 19:20:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.142 (still bad) 2009-Apr-20 19:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:20:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:20:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-20 19:20:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.137 (still bad) 2009-Apr-20 19:20:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-20 19:20:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-20 19:20:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.135 (still bad) 2009-Apr-20 19:20:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:20:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:20:46 LOG5 end_task: Level: (4) ID = <10040> Status = 0 0 0 0 ok 2009-Apr-20 19:20:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:20:46 LOG5 end_task: Level: (3) ID = <10039> Status = 0 0 0 0 ok 2009-Apr-20 19:20:46 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-20 19:20:46 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-20 19:20:46 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-20 19:20:46 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:20:46 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30337 J 2009-Apr-20 19:20:46 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:20:46 LOG2 antvel: Parameters to Doppler: Topocentric 84046 2009 110 0.0 2009-Apr-20 19:20:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:20:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-20 19:20:46 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-20 19:20:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:20:46 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:20:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-20 19:20:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:20:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-20 19:20:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:20:46 LOG5 begin_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-20 19:20:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-20 19:20:46 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.840705 2009.3033705351486 18.999933 2009-Apr-20 19:20:46 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666665 21.291666666666661 2009-Apr-20 19:20:46 LOG4 log_alfabeam: ALFABEAM 1 8.866593132227990 21.185571710985936 2009-Apr-20 19:20:46 LOG4 log_alfabeam: ALFABEAM 2 8.872255091244368 21.241822627609487 2009-Apr-20 19:20:46 LOG4 log_alfabeam: ALFABEAM 3 8.872481409667142 21.347943107703255 2009-Apr-20 19:20:46 LOG4 log_alfabeam: ALFABEAM 4 8.866651572199384 21.397868227806118 2009-Apr-20 19:20:46 LOG4 log_alfabeam: ALFABEAM 5 8.860900322552686 21.339311569127549 2009-Apr-20 19:20:46 LOG4 log_alfabeam: ALFABEAM 6 8.861068047853060 21.233204139894720 2009-Apr-20 19:20:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000194 2009-Apr-20 19:20:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:20:47 LOG5 begin_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-20 19:20:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:20:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-20 19:20:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:20:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:20:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:20:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-20 19:20:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84048.00 2009-Apr-20 19:20:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.133 (still bad) 2009-Apr-20 19:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:20:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:20:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-20 19:20:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.133 (still bad) 2009-Apr-20 19:20:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-20 19:20:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-20 19:20:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:20:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:20:58 LOG5 end_task: Level: (4) ID = <10042> Status = 0 0 0 0 ok 2009-Apr-20 19:20:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:20:58 LOG5 end_task: Level: (3) ID = <10041> Status = 0 0 0 0 ok 2009-Apr-20 19:20:58 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-20 19:20:58 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-20 19:20:58 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-20 19:20:58 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:20:58 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30337 J 2009-Apr-20 19:20:58 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:20:58 LOG2 antvel: Parameters to Doppler: Topocentric 84058 2009 110 0.0 2009-Apr-20 19:20:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:20:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-20 19:20:58 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-20 19:20:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:20:58 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:20:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-20 19:20:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:20:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-20 19:20:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:20:58 LOG5 begin_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-20 19:20:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-20 19:20:58 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.844048 2009.3033709154056 18.999933 2009-Apr-20 19:20:58 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666546 21.291666666666654 2009-Apr-20 19:20:58 LOG4 log_alfabeam: ALFABEAM 1 8.866714327238064 21.185568952993410 2009-Apr-20 19:20:58 LOG4 log_alfabeam: ALFABEAM 2 8.872311186169432 21.243075212931689 2009-Apr-20 19:20:58 LOG4 log_alfabeam: ALFABEAM 3 8.872416549932538 21.349232649565863 2009-Apr-20 19:20:58 LOG4 log_alfabeam: ALFABEAM 4 8.866529863413293 21.397851367781417 2009-Apr-20 19:20:58 LOG4 log_alfabeam: ALFABEAM 5 8.860846339634850 21.338013873130347 2009-Apr-20 19:20:58 LOG4 log_alfabeam: ALFABEAM 6 8.861135926859546 21.231957803215057 2009-Apr-20 19:20:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000195 2009-Apr-20 19:20:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:20:59 LOG5 begin_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-20 19:20:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-20 19:20:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:20:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-20 19:20:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:20:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:20:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:20:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-20 19:20:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84060.00 2009-Apr-20 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:21:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-20 19:21:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:21:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-20 19:21:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.116 (still bad) 2009-Apr-20 19:21:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.114 (still bad) 2009-Apr-20 19:21:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-20 19:21:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:21:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:21:10 LOG5 end_task: Level: (4) ID = <10044> Status = 0 0 0 0 ok 2009-Apr-20 19:21:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:21:10 LOG5 end_task: Level: (3) ID = <10043> Status = 0 0 0 0 ok 2009-Apr-20 19:21:10 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-20 19:21:10 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-20 19:21:10 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-20 19:21:10 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:21:10 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30337 J 2009-Apr-20 19:21:10 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:21:10 LOG2 antvel: Parameters to Doppler: Topocentric 84070 2009 110 0.0 2009-Apr-20 19:21:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:21:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-20 19:21:10 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-20 19:21:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:21:10 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:21:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-20 19:21:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:21:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-20 19:21:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:21:10 LOG5 begin_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-20 19:21:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-20 19:21:10 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.847390 2009.3033712956626 18.999933 2009-Apr-20 19:21:10 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666516 21.291666666666671 2009-Apr-20 19:21:10 LOG4 log_alfabeam: ALFABEAM 1 8.866836070444702 21.185593417856275 2009-Apr-20 19:21:10 LOG4 log_alfabeam: ALFABEAM 2 8.872366111714230 21.244346162645353 2009-Apr-20 19:21:10 LOG4 log_alfabeam: ALFABEAM 3 8.872349893345763 21.350513607720529 2009-Apr-20 19:21:10 LOG4 log_alfabeam: ALFABEAM 4 8.866407649177255 21.397807014662330 2009-Apr-20 19:21:10 LOG4 log_alfabeam: ALFABEAM 5 8.860793639637992 21.336698557442894 2009-Apr-20 19:21:10 LOG4 log_alfabeam: ALFABEAM 6 8.861205514015305 21.230721562783746 2009-Apr-20 19:21:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000196 2009-Apr-20 19:21:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:21:11 LOG5 begin_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-20 19:21:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:21:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-20 19:21:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:21:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:21:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:21:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-20 19:21:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-20 19:21:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84072.00 2009-Apr-20 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:21:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:21:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.117 (still bad) 2009-Apr-20 19:21:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-20 19:21:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-20 19:21:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.096 (still bad) 2009-Apr-20 19:21:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.096 (still bad) 2009-Apr-20 19:21:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:21:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:21:22 LOG5 end_task: Level: (4) ID = <10046> Status = 0 0 0 0 ok 2009-Apr-20 19:21:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:21:22 LOG5 end_task: Level: (3) ID = <10045> Status = 0 0 0 0 ok 2009-Apr-20 19:21:22 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-20 19:21:22 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-20 19:21:22 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-20 19:21:22 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:21:22 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30337 J 2009-Apr-20 19:21:22 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:21:22 LOG2 antvel: Parameters to Doppler: Topocentric 84082 2009 110 0.0 2009-Apr-20 19:21:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:21:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-20 19:21:22 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-20 19:21:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:21:22 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:21:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-20 19:21:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:21:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-20 19:21:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:21:22 LOG5 begin_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-20 19:21:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-20 19:21:22 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.850733 2009.3033716759196 18.999933 2009-Apr-20 19:21:22 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666520 21.291666666666679 2009-Apr-20 19:21:22 LOG4 log_alfabeam: ALFABEAM 1 8.866958346019606 21.185645484830498 2009-Apr-20 19:21:22 LOG4 log_alfabeam: ALFABEAM 2 8.872419840255004 21.245635501538953 2009-Apr-20 19:21:22 LOG4 log_alfabeam: ALFABEAM 3 8.872281426819942 21.351785598508179 2009-Apr-20 19:21:22 LOG4 log_alfabeam: ALFABEAM 4 8.866284946370616 21.397734804537833 2009-Apr-20 19:21:22 LOG4 log_alfabeam: ALFABEAM 5 8.860742249629535 21.335365650287308 2009-Apr-20 19:21:22 LOG4 log_alfabeam: ALFABEAM 6 8.861276818354781 21.229495780382553 2009-Apr-20 19:21:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000197 2009-Apr-20 19:21:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:21:23 LOG5 begin_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-20 19:21:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:21:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-20 19:21:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:21:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:21:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:21:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-20 19:21:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-20 19:21:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84084.00 2009-Apr-20 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:21:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:21:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-20 19:21:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-20 19:21:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.018 0.898 1.049 1.070 2009-Apr-20 19:21:27 LOG4 check_wapp_levels: WAPP-2 power levels: 0.997 0.950 1.073 0.896 2009-Apr-20 19:21:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.091 0.938 1.026 0.977 2009-Apr-20 19:21:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.901 0.106 0.991 0.130 2009-Apr-20 19:21:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:21:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.089 (still bad) 2009-Apr-20 19:21:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-20 19:21:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:21:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:21:34 LOG5 end_task: Level: (4) ID = <10048> Status = 0 0 0 0 ok 2009-Apr-20 19:21:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:21:34 LOG5 end_task: Level: (3) ID = <10047> Status = 0 0 0 0 ok 2009-Apr-20 19:21:34 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-20 19:21:34 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-20 19:21:34 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-20 19:21:34 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:21:34 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30337 J 2009-Apr-20 19:21:34 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:21:34 LOG2 antvel: Parameters to Doppler: Topocentric 84094 2009 110 0.0 2009-Apr-20 19:21:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:21:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-20 19:21:34 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-20 19:21:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:21:34 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:21:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-20 19:21:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:21:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-20 19:21:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:21:34 LOG5 begin_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-20 19:21:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-20 19:21:34 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.854075 2009.3033720561766 18.999933 2009-Apr-20 19:21:34 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666505 21.291666666666671 2009-Apr-20 19:21:34 LOG4 log_alfabeam: ALFABEAM 1 8.867080989813399 21.185725429063631 2009-Apr-20 19:21:34 LOG4 log_alfabeam: ALFABEAM 2 8.872472281093753 21.246941671401260 2009-Apr-20 19:21:34 LOG4 log_alfabeam: ALFABEAM 3 8.872211222598194 21.353046716361185 2009-Apr-20 19:21:34 LOG4 log_alfabeam: ALFABEAM 4 8.866161920616067 21.397634502807367 2009-Apr-20 19:21:34 LOG4 log_alfabeam: ALFABEAM 5 8.860692256635742 21.334016814330536 2009-Apr-20 19:21:34 LOG4 log_alfabeam: ALFABEAM 6 8.861349760324366 21.228282279829280 2009-Apr-20 19:21:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000198 2009-Apr-20 19:21:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:21:35 LOG5 begin_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-20 19:21:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:21:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-20 19:21:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:21:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:21:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:21:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-20 19:21:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84096.00 2009-Apr-20 19:21:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.090 (still bad) 2009-Apr-20 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:21:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:21:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.089 (still bad) 2009-Apr-20 19:21:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.087 (still bad) 2009-Apr-20 19:21:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2009-Apr-20 19:21:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.087 (still bad) 2009-Apr-20 19:21:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.087 (still bad) 2009-Apr-20 19:21:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:21:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:21:46 LOG5 end_task: Level: (4) ID = <10050> Status = 0 0 0 0 ok 2009-Apr-20 19:21:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:21:46 LOG5 end_task: Level: (3) ID = <10049> Status = 0 0 0 0 ok 2009-Apr-20 19:21:46 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-20 19:21:46 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-20 19:21:46 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-20 19:21:46 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-20 19:21:46 LOG5 begin_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-20 19:21:46 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-20 19:21:46 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-20 19:21:46 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-20 19:21:46 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-20 19:21:46 LOG5 end_task: Level: (3) ID = <10051> Status = 0 0 0 0 ok 2009-Apr-20 19:21:46 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-20 19:21:46 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-20 19:21:46 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-20 19:21:46 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:21:46 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30337 J 2009-Apr-20 19:21:46 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:21:46 LOG2 antvel: Parameters to Doppler: Topocentric 84106 2009 110 0.0 2009-Apr-20 19:21:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:21:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-20 19:21:46 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-20 19:21:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:21:46 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:21:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-20 19:21:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:21:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-20 19:21:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:21:46 LOG5 begin_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-20 19:21:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-20 19:21:46 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.857417 2009.3033724364338 18.999933 2009-Apr-20 19:21:46 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666532 21.291666666666654 2009-Apr-20 19:21:46 LOG4 log_alfabeam: ALFABEAM 1 8.867203945328347 21.185833507618405 2009-Apr-20 19:21:46 LOG4 log_alfabeam: ALFABEAM 2 8.872523394136108 21.248264219325616 2009-Apr-20 19:21:46 LOG4 log_alfabeam: ALFABEAM 3 8.872139296199789 21.354296208837663 2009-Apr-20 19:21:46 LOG4 log_alfabeam: ALFABEAM 4 8.866038629372319 21.397505876044654 2009-Apr-20 19:21:47 LOG4 log_alfabeam: ALFABEAM 5 8.860643698781150 21.332652566119453 2009-Apr-20 19:21:47 LOG4 log_alfabeam: ALFABEAM 6 8.861424319881516 21.227081767763472 2009-Apr-20 19:21:47 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000199 2009-Apr-20 19:21:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:21:47 LOG5 begin_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-20 19:21:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:21:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-20 19:21:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:21:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:21:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:21:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84108.00 2009-Apr-20 19:21:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-20 19:21:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.087 (still bad) 2009-Apr-20 19:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:21:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:21:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.605 (still bad) 2009-Apr-20 19:21:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.605 (still bad) 2009-Apr-20 19:21:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.607 (still bad) 2009-Apr-20 19:21:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.604 (still bad) 2009-Apr-20 19:21:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:21:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:21:58 LOG5 end_task: Level: (4) ID = <10053> Status = 0 0 0 0 ok 2009-Apr-20 19:21:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:21:58 LOG5 end_task: Level: (3) ID = <10052> Status = 0 0 0 0 ok 2009-Apr-20 19:21:58 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-20 19:21:58 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-20 19:21:58 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-20 19:21:58 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:21:58 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30337 J 2009-Apr-20 19:21:58 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:21:58 LOG2 antvel: Parameters to Doppler: Topocentric 84117 2009 110 0.0 2009-Apr-20 19:21:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:21:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-20 19:21:58 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-20 19:21:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:21:58 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:21:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-20 19:21:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:21:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-20 19:21:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:21:58 LOG5 begin_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-20 19:21:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-20 19:21:58 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.860481 2009.3033727850027 18.999933 2009-Apr-20 19:21:58 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666557 21.291666666666671 2009-Apr-20 19:21:58 LOG4 log_alfabeam: ALFABEAM 1 8.867316865967874 21.185957474425440 2009-Apr-20 19:21:58 LOG4 log_alfabeam: ALFABEAM 2 8.872569042599395 21.249490390520240 2009-Apr-20 19:21:58 LOG4 log_alfabeam: ALFABEAM 3 8.872071873866696 21.355430591890073 2009-Apr-20 19:21:58 LOG4 log_alfabeam: ALFABEAM 4 8.865925442380256 21.397362928881932 2009-Apr-20 19:21:58 LOG4 log_alfabeam: ALFABEAM 5 8.860600484695523 21.331389076002186 2009-Apr-20 19:21:58 LOG4 log_alfabeam: ALFABEAM 6 8.861494060047763 21.225993433471729 2009-Apr-20 19:21:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000200 2009-Apr-20 19:21:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:21:59 LOG5 begin_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-20 19:21:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:21:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-20 19:21:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.606 (still bad) 2009-Apr-20 19:21:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:21:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:21:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:21:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-20 19:21:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84120.00 2009-Apr-20 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:22:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:22:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.596 (still bad) 2009-Apr-20 19:22:03 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.600 (still bad) 2009-Apr-20 19:22:05 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.595 (still bad) 2009-Apr-20 19:22:07 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.590 (still bad) 2009-Apr-20 19:22:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.596 (still bad) 2009-Apr-20 19:22:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:22:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:22:10 LOG5 end_task: Level: (4) ID = <10055> Status = 0 0 0 0 ok 2009-Apr-20 19:22:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:22:10 LOG5 end_task: Level: (3) ID = <10054> Status = 0 0 0 0 ok 2009-Apr-20 19:22:10 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-20 19:22:10 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-20 19:22:10 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-20 19:22:10 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:22:10 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30337 J 2009-Apr-20 19:22:10 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:22:10 LOG2 antvel: Parameters to Doppler: Topocentric 84130 2009 110 0.0 2009-Apr-20 19:22:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:22:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-20 19:22:10 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-20 19:22:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:22:10 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:22:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-20 19:22:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:22:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-20 19:22:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:22:10 LOG5 begin_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-20 19:22:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-20 19:22:10 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.864102 2009.3033731969479 18.999933 2009-Apr-20 19:22:10 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666509 21.291666666666661 2009-Apr-20 19:22:10 LOG4 log_alfabeam: ALFABEAM 1 8.867450448257841 21.186134788730147 2009-Apr-20 19:22:10 LOG4 log_alfabeam: ALFABEAM 2 8.872621438185687 21.250955280755271 2009-Apr-20 19:22:10 LOG4 log_alfabeam: ALFABEAM 3 8.871990418960699 21.356756221745162 2009-Apr-20 19:22:10 LOG4 log_alfabeam: ALFABEAM 4 8.865791597333631 21.397163043501958 2009-Apr-20 19:22:10 LOG4 log_alfabeam: ALFABEAM 5 8.860551075501091 21.329881286623614 2009-Apr-20 19:22:10 LOG4 log_alfabeam: ALFABEAM 6 8.861578130137881 21.224723557738177 2009-Apr-20 19:22:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000201 2009-Apr-20 19:22:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:22:11 LOG5 begin_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-20 19:22:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:22:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-20 19:22:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:22:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:22:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:22:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.595 (still bad) 2009-Apr-20 19:22:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-20 19:22:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84132.00 2009-Apr-20 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:22:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:22:13 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.588 (still bad) 2009-Apr-20 19:22:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.595 (still bad) 2009-Apr-20 19:22:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.588 (still bad) 2009-Apr-20 19:22:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.584 (still bad) 2009-Apr-20 19:22:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.591 (still bad) 2009-Apr-20 19:22:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:22:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:22:22 LOG5 end_task: Level: (4) ID = <10057> Status = 0 0 0 0 ok 2009-Apr-20 19:22:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:22:22 LOG5 end_task: Level: (3) ID = <10056> Status = 0 0 0 0 ok 2009-Apr-20 19:22:22 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-20 19:22:22 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-20 19:22:22 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-20 19:22:22 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:22:22 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30337 J 2009-Apr-20 19:22:22 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:22:22 LOG2 antvel: Parameters to Doppler: Topocentric 84142 2009 110 0.0 2009-Apr-20 19:22:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:22:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-20 19:22:22 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-20 19:22:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:22:22 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:22:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-20 19:22:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:22:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-20 19:22:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:22:22 LOG5 begin_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-20 19:22:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-20 19:22:22 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.867445 2009.3033735772049 18.999933 2009-Apr-20 19:22:22 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666539 21.291666666666664 2009-Apr-20 19:22:22 LOG4 log_alfabeam: ALFABEAM 1 8.867573802569854 21.186328179770168 2009-Apr-20 19:22:22 LOG4 log_alfabeam: ALFABEAM 2 8.872668268865075 21.252321907101500 2009-Apr-20 19:22:22 LOG4 log_alfabeam: ALFABEAM 3 8.871913560268819 21.357964556175926 2009-Apr-20 19:22:22 LOG4 log_alfabeam: ALFABEAM 4 8.865668051178499 21.396948712860546 2009-Apr-20 19:22:22 LOG4 log_alfabeam: ALFABEAM 5 8.860507103328819 21.328476285110504 2009-Apr-20 19:22:22 LOG4 log_alfabeam: ALFABEAM 6 8.861657279248732 21.223567903220882 2009-Apr-20 19:22:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000202 2009-Apr-20 19:22:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:22:23 LOG5 begin_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-20 19:22:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:22:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-20 19:22:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:22:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:22:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:22:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-20 19:22:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84144.00 2009-Apr-20 19:22:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.590 (still bad) 2009-Apr-20 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:22:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:22:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.567 (still bad) 2009-Apr-20 19:22:28 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-20 19:22:28 LOG4 check_wapp_levels: WAPP-1 power levels: 1.448 1.247 1.476 1.485 2009-Apr-20 19:22:28 LOG4 check_wapp_levels: WAPP-2 power levels: 1.409 1.339 1.537 1.253 2009-Apr-20 19:22:28 LOG4 check_wapp_levels: WAPP-3 power levels: 1.575 1.331 1.498 1.338 2009-Apr-20 19:22:28 LOG4 check_wapp_levels: WAPP-4 power levels: 1.303 0.106 1.436 0.131 2009-Apr-20 19:22:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.568 (still bad) 2009-Apr-20 19:22:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.566 (still bad) 2009-Apr-20 19:22:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.570 (still bad) 2009-Apr-20 19:22:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:22:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:22:34 LOG5 end_task: Level: (4) ID = <10059> Status = 0 0 0 0 ok 2009-Apr-20 19:22:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:22:34 LOG5 end_task: Level: (3) ID = <10058> Status = 0 0 0 0 ok 2009-Apr-20 19:22:34 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-20 19:22:34 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-20 19:22:34 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-20 19:22:34 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:22:34 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30337 J 2009-Apr-20 19:22:34 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:22:34 LOG2 antvel: Parameters to Doppler: Topocentric 84154 2009 110 0.0 2009-Apr-20 19:22:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:22:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-20 19:22:34 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-20 19:22:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:22:34 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:22:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-20 19:22:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:22:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-20 19:22:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:22:34 LOG5 begin_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-20 19:22:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-20 19:22:34 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.870787 2009.3033739574621 18.999933 2009-Apr-20 19:22:34 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666525 21.291666666666661 2009-Apr-20 19:22:34 LOG4 log_alfabeam: ALFABEAM 1 8.867697046206510 21.186549992140961 2009-Apr-20 19:22:34 LOG4 log_alfabeam: ALFABEAM 2 8.872713559099248 21.253700720522740 2009-Apr-20 19:22:34 LOG4 log_alfabeam: ALFABEAM 3 8.871835188090996 21.359156556614149 2009-Apr-20 19:22:34 LOG4 log_alfabeam: ALFABEAM 4 8.865544665000419 21.396705903470313 2009-Apr-20 19:22:34 LOG4 log_alfabeam: ALFABEAM 5 8.860464763863105 21.327060356988369 2009-Apr-20 19:22:34 LOG4 log_alfabeam: ALFABEAM 6 8.861737817857167 21.222429644362077 2009-Apr-20 19:22:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000203 2009-Apr-20 19:22:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:22:35 LOG5 begin_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-20 19:22:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:22:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-20 19:22:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:22:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:22:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-20 19:22:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84156.00 2009-Apr-20 19:22:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.570 (still bad) 2009-Apr-20 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:22:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:22:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.537 (still bad) 2009-Apr-20 19:22:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.545 (still bad) 2009-Apr-20 19:22:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.538 (still bad) 2009-Apr-20 19:22:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.538 (still bad) 2009-Apr-20 19:22:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:22:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:22:46 LOG5 end_task: Level: (4) ID = <10061> Status = 0 0 0 0 ok 2009-Apr-20 19:22:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:22:46 LOG5 end_task: Level: (3) ID = <10060> Status = 0 0 0 0 ok 2009-Apr-20 19:22:46 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-20 19:22:46 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-20 19:22:46 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-20 19:22:46 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:22:46 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30337 J 2009-Apr-20 19:22:46 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:22:46 LOG2 antvel: Parameters to Doppler: Topocentric 84166 2009 110 0.0 2009-Apr-20 19:22:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:22:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-20 19:22:46 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-20 19:22:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:22:46 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:22:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-20 19:22:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:22:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-20 19:22:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:22:46 LOG5 begin_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-20 19:22:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-20 19:22:46 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.874130 2009.3033743377191 18.999933 2009-Apr-20 19:22:46 LOG4 log_alfabeam: ALFABEAM 0 8.866666666665976 21.291666666666661 2009-Apr-20 19:22:46 LOG4 log_alfabeam: ALFABEAM 1 8.867820154987301 21.186800277620883 2009-Apr-20 19:22:46 LOG4 log_alfabeam: ALFABEAM 2 8.872757294280913 21.255091505688416 2009-Apr-20 19:22:46 LOG4 log_alfabeam: ALFABEAM 3 8.871755312123645 21.360331921048338 2009-Apr-20 19:22:46 LOG4 log_alfabeam: ALFABEAM 4 8.865421463266289 21.396434584103712 2009-Apr-20 19:22:46 LOG4 log_alfabeam: ALFABEAM 5 8.860424069080777 21.325633758083065 2009-Apr-20 19:22:46 LOG4 log_alfabeam: ALFABEAM 6 8.861819733787499 21.221309033389357 2009-Apr-20 19:22:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000204 2009-Apr-20 19:22:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:22:47 LOG5 begin_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-20 19:22:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.543 (still bad) 2009-Apr-20 19:22:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:22:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-20 19:22:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:22:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:22:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:22:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-20 19:22:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84168.00 2009-Apr-20 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:22:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.540 (still bad) 2009-Apr-20 19:22:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:22:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.534 (still bad) 2009-Apr-20 19:22:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.535 (still bad) 2009-Apr-20 19:22:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.532 (still bad) 2009-Apr-20 19:22:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.530 (still bad) 2009-Apr-20 19:22:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:22:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:22:58 LOG5 end_task: Level: (4) ID = <10063> Status = 0 0 0 0 ok 2009-Apr-20 19:22:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:22:58 LOG5 end_task: Level: (3) ID = <10062> Status = 0 0 0 0 ok 2009-Apr-20 19:22:58 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-20 19:22:58 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-20 19:22:58 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-20 19:22:58 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:22:58 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30337 J 2009-Apr-20 19:22:58 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:22:58 LOG2 antvel: Parameters to Doppler: Topocentric 84178 2009 110 0.0 2009-Apr-20 19:22:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:22:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-20 19:22:58 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-20 19:22:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:22:58 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:22:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-20 19:22:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:22:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-20 19:22:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:22:58 LOG5 begin_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-20 19:22:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-20 19:22:58 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.877472 2009.3033747179761 18.999933 2009-Apr-20 19:22:58 LOG4 log_alfabeam: ALFABEAM 0 8.866666666668106 21.291666666666682 2009-Apr-20 19:22:58 LOG4 log_alfabeam: ALFABEAM 1 8.867942957526576 21.187078738365894 2009-Apr-20 19:22:58 LOG4 log_alfabeam: ALFABEAM 2 8.872799410116540 21.256492360335717 2009-Apr-20 19:22:58 LOG4 log_alfabeam: ALFABEAM 3 8.871674040400402 21.361488968642593 2009-Apr-20 19:22:58 LOG4 log_alfabeam: ALFABEAM 4 8.865298617665461 21.396135098489420 2009-Apr-20 19:22:58 LOG4 log_alfabeam: ALFABEAM 5 8.860385076769715 21.324198470799715 2009-Apr-20 19:22:58 LOG4 log_alfabeam: ALFABEAM 6 8.861902914325404 21.220207633065282 2009-Apr-20 19:22:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000205 2009-Apr-20 19:22:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:22:59 LOG5 begin_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-20 19:22:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:22:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-20 19:22:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:22:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:22:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:22:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.532 (still bad) 2009-Apr-20 19:22:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-20 19:22:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84180.00 2009-Apr-20 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:23:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:23:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.532 (still bad) 2009-Apr-20 19:23:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.527 (still bad) 2009-Apr-20 19:23:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.531 (still bad) 2009-Apr-20 19:23:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.525 (still bad) 2009-Apr-20 19:23:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.527 (still bad) 2009-Apr-20 19:23:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:23:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:23:10 LOG5 end_task: Level: (4) ID = <10065> Status = 0 0 0 0 ok 2009-Apr-20 19:23:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:23:10 LOG5 end_task: Level: (3) ID = <10064> Status = 0 0 0 0 ok 2009-Apr-20 19:23:10 INFO2 smartfreq: Starting smart frequency switching loop 2 of 2 2009-Apr-20 19:23:10 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-20 19:23:10 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_off INFO {Making 7 CAL-OFFs followed by 7 CAL-ONs} MESSAGE {Setting CAL-OFF ...} 2009-Apr-20 19:23:10 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-20 19:23:10 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-20 19:23:10 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-20 19:23:10 LOG5 begin_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-20 19:23:10 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-20 19:23:10 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-20 19:23:10 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-20 19:23:10 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-20 19:23:10 LOG5 end_task: Level: (3) ID = <10066> Status = 0 0 0 0 ok 2009-Apr-20 19:23:10 LOG4 send_obs_status: To obs_status: <1> TOTALPARTS 2*7 2009-Apr-20 19:23:10 INFO3 smartfreq: Taking CAL-OFF at 1380.60607910 MHz ... 2009-Apr-20 19:23:10 LOG4 send_obs_status: To obs_status: <1> PART A1 MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-20 19:23:10 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-20 19:23:10 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:23:10 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30338 J 2009-Apr-20 19:23:10 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:23:10 LOG2 antvel: Parameters to Doppler: Topocentric 84190 2009 110 0.0 2009-Apr-20 19:23:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:23:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-20 19:23:10 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-20 19:23:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:23:10 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:23:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-20 19:23:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:23:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1380.60607910 MHz}' 2009-Apr-20 19:23:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:23:10 LOG5 begin_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-20 19:23:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-20 19:23:11 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.880815 2009.3033750982331 18.999933 2009-Apr-20 19:23:11 LOG4 log_alfabeam: ALFABEAM 0 8.866666666667028 21.291666666666679 2009-Apr-20 19:23:11 LOG4 log_alfabeam: ALFABEAM 1 8.868065430078842 21.187385326050006 2009-Apr-20 19:23:11 LOG4 log_alfabeam: ALFABEAM 2 8.872839897396547 21.257903026133647 2009-Apr-20 19:23:11 LOG4 log_alfabeam: ALFABEAM 3 8.871591387999210 21.362627455110523 2009-Apr-20 19:23:11 LOG4 log_alfabeam: ALFABEAM 4 8.865176151951673 21.395807515707155 2009-Apr-20 19:23:11 LOG4 log_alfabeam: ALFABEAM 5 8.860347793045879 21.322754787316466 2009-Apr-20 19:23:11 LOG4 log_alfabeam: ALFABEAM 6 8.861987342532613 21.219125632666071 2009-Apr-20 19:23:11 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000206 2009-Apr-20 19:23:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:23:11 LOG5 begin_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-20 19:23:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:23:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-20 19:23:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:23:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:23:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1380.60607910 MHz ...} 2009-Apr-20 19:23:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.528 (still bad) 2009-Apr-20 19:23:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84192.00 2009-Apr-20 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:23:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:23:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.463 (still bad) 2009-Apr-20 19:23:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.138 (still bad) 2009-Apr-20 19:23:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.135 (still bad) 2009-Apr-20 19:23:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.136 (still bad) 2009-Apr-20 19:23:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.137 (still bad) 2009-Apr-20 19:23:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:23:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:23:22 LOG5 end_task: Level: (4) ID = <10068> Status = 0 0 0 0 ok 2009-Apr-20 19:23:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:23:22 LOG5 end_task: Level: (3) ID = <10067> Status = 0 0 0 0 ok 2009-Apr-20 19:23:22 INFO3 smartfreq: Taking CAL-OFF at 1383.34045410 MHz ... 2009-Apr-20 19:23:22 LOG4 send_obs_status: To obs_status: <1> PART A2 MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-20 19:23:22 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-20 19:23:22 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:23:22 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30338 J 2009-Apr-20 19:23:22 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:23:22 LOG2 antvel: Parameters to Doppler: Topocentric 84202 2009 110 0.0 2009-Apr-20 19:23:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:23:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-20 19:23:22 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-20 19:23:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:23:22 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:23:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-20 19:23:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:23:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.34045410 MHz}' 2009-Apr-20 19:23:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:23:22 LOG5 begin_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-20 19:23:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-20 19:23:22 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.884157 2009.3033754784901 18.999933 2009-Apr-20 19:23:22 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666800 21.291666666666671 2009-Apr-20 19:23:22 LOG4 log_alfabeam: ALFABEAM 1 8.868187403125965 21.187719576431096 2009-Apr-20 19:23:22 LOG4 log_alfabeam: ALFABEAM 2 8.872878701364948 21.259321541181947 2009-Apr-20 19:23:22 LOG4 log_alfabeam: ALFABEAM 3 8.871507471254029 21.363745808062170 2009-Apr-20 19:23:22 LOG4 log_alfabeam: ALFABEAM 4 8.865054235565273 21.395452345729172 2009-Apr-20 19:23:22 LOG4 log_alfabeam: ALFABEAM 5 8.860312265545717 21.321304739147418 2009-Apr-20 19:23:22 LOG4 log_alfabeam: ALFABEAM 6 8.862072898427771 21.218064480015897 2009-Apr-20 19:23:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000207 2009-Apr-20 19:23:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:23:23 LOG5 begin_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-20 19:23:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:23:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-20 19:23:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:23:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:23:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:23:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.34045410 MHz ...} 2009-Apr-20 19:23:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84204.00 2009-Apr-20 19:23:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.138 (still bad) 2009-Apr-20 19:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:23:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:23:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.128 (still bad) 2009-Apr-20 19:23:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.132 (still bad) 2009-Apr-20 19:23:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-20 19:23:30 LOG4 check_wapp_levels: WAPP-1 power levels: 1.042 0.916 1.081 1.089 2009-Apr-20 19:23:30 LOG4 check_wapp_levels: WAPP-2 power levels: 1.010 0.967 1.111 0.909 2009-Apr-20 19:23:30 LOG4 check_wapp_levels: WAPP-3 power levels: 1.129 0.949 1.084 1.005 2009-Apr-20 19:23:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.915 0.106 1.010 0.131 2009-Apr-20 19:23:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.127 (still bad) 2009-Apr-20 19:23:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-20 19:23:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:23:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:23:34 LOG5 end_task: Level: (4) ID = <10070> Status = 0 0 0 0 ok 2009-Apr-20 19:23:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:23:34 LOG5 end_task: Level: (3) ID = <10069> Status = 0 0 0 0 ok 2009-Apr-20 19:23:34 INFO3 smartfreq: Taking CAL-OFF at 1383.53576660 MHz ... 2009-Apr-20 19:23:34 LOG4 send_obs_status: To obs_status: <1> PART A3 MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-20 19:23:34 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-20 19:23:34 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:23:34 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30338 J 2009-Apr-20 19:23:34 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:23:34 LOG2 antvel: Parameters to Doppler: Topocentric 84214 2009 110 0.0 2009-Apr-20 19:23:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:23:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-20 19:23:34 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-20 19:23:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:23:34 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:23:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-20 19:23:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:23:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1383.53576660 MHz}' 2009-Apr-20 19:23:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:23:34 LOG5 begin_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-20 19:23:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-20 19:23:34 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.887500 2009.3033758587474 18.999933 2009-Apr-20 19:23:34 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666600 21.291666666666661 2009-Apr-20 19:23:34 LOG4 log_alfabeam: ALFABEAM 1 8.868308854671445 21.188081343913225 2009-Apr-20 19:23:34 LOG4 log_alfabeam: ALFABEAM 2 8.872915818683325 21.260747618703451 2009-Apr-20 19:23:34 LOG4 log_alfabeam: ALFABEAM 3 8.871422309781940 21.364843853682750 2009-Apr-20 19:23:34 LOG4 log_alfabeam: ALFABEAM 4 8.864932890282422 21.395069754486936 2009-Apr-20 19:23:34 LOG4 log_alfabeam: ALFABEAM 5 8.860278494148044 21.319848639256566 2009-Apr-20 19:23:34 LOG4 log_alfabeam: ALFABEAM 6 8.862159561227076 21.217024290341030 2009-Apr-20 19:23:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000208 2009-Apr-20 19:23:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:23:35 LOG5 begin_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-20 19:23:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:23:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-20 19:23:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:23:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:23:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:23:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1383.53576660 MHz ...} 2009-Apr-20 19:23:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84216.00 2009-Apr-20 19:23:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.129 (still bad) 2009-Apr-20 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:23:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:23:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.125 (still bad) 2009-Apr-20 19:23:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.130 (still bad) 2009-Apr-20 19:23:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-20 19:23:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-20 19:23:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:23:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:23:46 LOG5 end_task: Level: (4) ID = <10072> Status = 0 0 0 0 ok 2009-Apr-20 19:23:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:23:46 LOG5 end_task: Level: (3) ID = <10071> Status = 0 0 0 0 ok 2009-Apr-20 19:23:46 INFO3 smartfreq: Taking CAL-OFF at 1384.12170410 MHz ... 2009-Apr-20 19:23:46 LOG4 send_obs_status: To obs_status: <1> PART A4 MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-20 19:23:46 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-20 19:23:46 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:23:46 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30338 J 2009-Apr-20 19:23:46 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:23:46 LOG2 antvel: Parameters to Doppler: Topocentric 84226 2009 110 0.0 2009-Apr-20 19:23:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:23:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-20 19:23:46 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-20 19:23:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:23:46 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:23:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-20 19:23:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:23:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1384.12170410 MHz}' 2009-Apr-20 19:23:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:23:46 LOG5 begin_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-20 19:23:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-20 19:23:46 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.890842 2009.3033762390044 18.999933 2009-Apr-20 19:23:46 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666758 21.291666666666664 2009-Apr-20 19:23:46 LOG4 log_alfabeam: ALFABEAM 1 8.868429618784635 21.188470003598525 2009-Apr-20 19:23:46 LOG4 log_alfabeam: ALFABEAM 2 8.872951204661407 21.262179257560934 2009-Apr-20 19:23:46 LOG4 log_alfabeam: ALFABEAM 3 8.871336026973443 21.365920143945015 2009-Apr-20 19:23:46 LOG4 log_alfabeam: ALFABEAM 4 8.864812281567071 21.394660411679869 2009-Apr-20 19:23:46 LOG4 log_alfabeam: ALFABEAM 5 8.860246515935952 21.318388546751400 2009-Apr-20 19:23:46 LOG4 log_alfabeam: ALFABEAM 6 8.862247204940440 21.216006382760590 2009-Apr-20 19:23:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000209 2009-Apr-20 19:23:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:23:47 LOG5 begin_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-20 19:23:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-20 19:23:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:23:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-20 19:23:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:23:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:23:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:23:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1384.12170410 MHz ...} 2009-Apr-20 19:23:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84228.00 2009-Apr-20 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:23:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.126 (still bad) 2009-Apr-20 19:23:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:23:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-20 19:23:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.118 (still bad) 2009-Apr-20 19:23:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-20 19:23:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.113 (still bad) 2009-Apr-20 19:23:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:23:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:23:58 LOG5 end_task: Level: (4) ID = <10074> Status = 0 0 0 0 ok 2009-Apr-20 19:23:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:23:58 LOG5 end_task: Level: (3) ID = <10073> Status = 0 0 0 0 ok 2009-Apr-20 19:23:58 INFO3 smartfreq: Taking CAL-OFF at 1385.29357910 MHz ... 2009-Apr-20 19:23:58 LOG4 send_obs_status: To obs_status: <1> PART A5 MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-20 19:23:58 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-20 19:23:58 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:23:58 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30338 J 2009-Apr-20 19:23:58 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:23:58 LOG2 antvel: Parameters to Doppler: Topocentric 84238 2009 110 0.0 2009-Apr-20 19:23:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:23:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-20 19:23:58 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-20 19:23:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:23:58 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:23:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-20 19:23:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:23:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.29357910 MHz}' 2009-Apr-20 19:23:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:23:58 LOG5 begin_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-20 19:23:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-20 19:23:58 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.894184 2009.3033766192614 18.999933 2009-Apr-20 19:23:58 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666797 21.291666666666664 2009-Apr-20 19:23:58 LOG4 log_alfabeam: ALFABEAM 1 8.868549640667471 21.188885190388046 2009-Apr-20 19:23:58 LOG4 log_alfabeam: ALFABEAM 2 8.872984852304247 21.263615727510583 2009-Apr-20 19:23:58 LOG4 log_alfabeam: ALFABEAM 3 8.871248672284381 21.366974273926854 2009-Apr-20 19:23:58 LOG4 log_alfabeam: ALFABEAM 4 8.864692463685543 21.394224707832450 2009-Apr-20 19:23:58 LOG4 log_alfabeam: ALFABEAM 5 8.860216333134497 21.316925217465183 2009-Apr-20 19:23:58 LOG4 log_alfabeam: ALFABEAM 6 8.862335779334064 21.215011084134730 2009-Apr-20 19:23:58 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000210 2009-Apr-20 19:23:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:23:59 LOG5 begin_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-20 19:23:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:23:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-20 19:23:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:23:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:23:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:23:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-20 19:23:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.29357910 MHz ...} 2009-Apr-20 19:23:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84240.00 2009-Apr-20 19:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:24:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:24:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.115 (still bad) 2009-Apr-20 19:24:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.091 (still bad) 2009-Apr-20 19:24:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:24:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.091 (still bad) 2009-Apr-20 19:24:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.089 (still bad) 2009-Apr-20 19:24:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:24:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:24:10 LOG5 end_task: Level: (4) ID = <10076> Status = 0 0 0 0 ok 2009-Apr-20 19:24:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:24:10 LOG5 end_task: Level: (3) ID = <10075> Status = 0 0 0 0 ok 2009-Apr-20 19:24:10 INFO3 smartfreq: Taking CAL-OFF at 1385.68420410 MHz ... 2009-Apr-20 19:24:10 LOG4 send_obs_status: To obs_status: <1> PART A6 MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-20 19:24:10 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-20 19:24:10 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:24:10 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30338 J 2009-Apr-20 19:24:10 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:24:10 LOG2 antvel: Parameters to Doppler: Topocentric 84250 2009 110 0.0 2009-Apr-20 19:24:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:24:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-20 19:24:10 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-20 19:24:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:24:10 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:24:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-20 19:24:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:24:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1385.68420410 MHz}' 2009-Apr-20 19:24:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:24:10 LOG5 begin_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-20 19:24:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-20 19:24:10 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.897527 2009.3033769995184 18.999933 2009-Apr-20 19:24:10 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666831 21.291666666666671 2009-Apr-20 19:24:10 LOG4 log_alfabeam: ALFABEAM 1 8.868668867001745 21.189326512499282 2009-Apr-20 19:24:10 LOG4 log_alfabeam: ALFABEAM 2 8.873016756697256 21.265056300556537 2009-Apr-20 19:24:10 LOG4 log_alfabeam: ALFABEAM 3 8.871160295898781 21.368005868993642 2009-Apr-20 19:24:10 LOG4 log_alfabeam: ALFABEAM 4 8.864573489336191 21.393763059529441 2009-Apr-20 19:24:10 LOG4 log_alfabeam: ALFABEAM 5 8.860187945833886 21.315459401563551 2009-Apr-20 19:24:10 LOG4 log_alfabeam: ALFABEAM 6 8.862425233731368 21.214038691075313 2009-Apr-20 19:24:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000211 2009-Apr-20 19:24:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:24:11 LOG5 begin_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-20 19:24:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:24:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-20 19:24:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:24:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:24:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:24:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1385.68420410 MHz ...} 2009-Apr-20 19:24:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84252.00 2009-Apr-20 19:24:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:24:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:24:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.087 (still bad) 2009-Apr-20 19:24:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.089 (still bad) 2009-Apr-20 19:24:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.089 (still bad) 2009-Apr-20 19:24:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.086 (still bad) 2009-Apr-20 19:24:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.087 (still bad) 2009-Apr-20 19:24:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:24:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:24:22 LOG5 end_task: Level: (4) ID = <10078> Status = 0 0 0 0 ok 2009-Apr-20 19:24:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:24:22 LOG5 end_task: Level: (3) ID = <10077> Status = 0 0 0 0 ok 2009-Apr-20 19:24:22 INFO3 smartfreq: Taking CAL-OFF at 1386.66076660 MHz ... 2009-Apr-20 19:24:22 LOG4 send_obs_status: To obs_status: <1> PART A7 MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-20 19:24:22 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-20 19:24:22 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:24:22 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30338 J 2009-Apr-20 19:24:22 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:24:22 LOG2 antvel: Parameters to Doppler: Topocentric 84262 2009 110 0.0 2009-Apr-20 19:24:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:24:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-20 19:24:22 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-20 19:24:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:24:22 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:24:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-20 19:24:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:24:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF OFF stat_cal_off {CAL-OFF at 1386.66076660 MHz}' 2009-Apr-20 19:24:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:24:22 LOG5 begin_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-20 19:24:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-20 19:24:22 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.900869 2009.3033773797754 18.999933 2009-Apr-20 19:24:22 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666818 21.291666666666668 2009-Apr-20 19:24:22 LOG4 log_alfabeam: ALFABEAM 1 8.868787140274961 21.189793122541918 2009-Apr-20 19:24:22 LOG4 log_alfabeam: ALFABEAM 2 8.873046888718543 21.266498956259824 2009-Apr-20 19:24:22 LOG4 log_alfabeam: ALFABEAM 3 8.871071029153631 21.369013690855770 2009-Apr-20 19:24:22 LOG4 log_alfabeam: ALFABEAM 4 8.864455515036838 21.393276356207075 2009-Apr-20 19:24:22 LOG4 log_alfabeam: ALFABEAM 5 8.860161375074611 21.313993158659645 2009-Apr-20 19:24:22 LOG4 log_alfabeam: ALFABEAM 6 8.862515435809321 21.213090310660796 2009-Apr-20 19:24:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000212 2009-Apr-20 19:24:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:24:23 LOG5 begin_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-20 19:24:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:24:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-20 19:24:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:24:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:24:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:24:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_off MESSAGE {Taking CAL-OFF at 1386.66076660 MHz ...} 2009-Apr-20 19:24:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84264.00 2009-Apr-20 19:24:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.086 (still bad) 2009-Apr-20 19:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:24:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:24:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.084 (still bad) 2009-Apr-20 19:24:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.083 (still bad) 2009-Apr-20 19:24:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.086 (still bad) 2009-Apr-20 19:24:32 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:24:32 LOG4 check_wapp_levels: WAPP-1 power levels: 1.004 0.895 1.043 1.065 2009-Apr-20 19:24:32 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.952 1.058 0.892 2009-Apr-20 19:24:32 LOG4 check_wapp_levels: WAPP-3 power levels: 1.083 0.932 1.015 0.972 2009-Apr-20 19:24:32 LOG4 check_wapp_levels: WAPP-4 power levels: 0.900 0.105 0.990 0.130 2009-Apr-20 19:24:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:24:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:24:34 LOG5 end_task: Level: (4) ID = <10080> Status = 0 0 0 0 ok 2009-Apr-20 19:24:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:24:34 LOG5 end_task: Level: (3) ID = <10079> Status = 0 0 0 0 ok 2009-Apr-20 19:24:34 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_cal_on INFO {Making 7 CAL-ONs} MESSAGE {Setting CAL-ON ...} 2009-Apr-20 19:24:34 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-20 19:24:34 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-20 19:24:34 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-20 19:24:34 LOG5 begin_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-20 19:24:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.085 (still bad) 2009-Apr-20 19:24:34 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-20 19:24:34 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-20 19:24:34 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-20 19:24:34 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-20 19:24:34 LOG5 end_task: Level: (3) ID = <10081> Status = 0 0 0 0 ok 2009-Apr-20 19:24:34 INFO3 smartfreq: Taking CAL-ON at 1380.60607910 MHz ... 2009-Apr-20 19:24:34 LOG4 send_obs_status: To obs_status: <1> PART B1 MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-20 19:24:34 INFO4 set_smart_frequency: Setting frequency 1380.60607910 MHz 2009-Apr-20 19:24:34 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:24:34 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30338 J 2009-Apr-20 19:24:34 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:24:34 LOG2 antvel: Parameters to Doppler: Topocentric 84274 2009 110 0.0 2009-Apr-20 19:24:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:24:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1380.60607910 rest0=1380.60607910 rest1=1380.60607910 rest2=1380.60607910 rest3=1380.60607910 rest4=1380.60607910 rest5=1380.60607910 rest6=1380.60607910 rest7=1380.60607910 2009-Apr-20 19:24:34 INFO4 dopset_gen: New sky frequencies: 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 1380.606079 2009-Apr-20 19:24:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1380.606079 sky0=1380.606079 sky1=1380.606079 sky2=1380.606079 sky3=1380.606079 sky4=1380.606079 sky5=1380.606079 sky6=1380.606079 sky7=1380.606079 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:24:34 LOG2 dopset_gen: Result from 'sky2syn': 1630.606079 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:24:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-20 19:24:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:24:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1380.60607910 MHz}' 2009-Apr-20 19:24:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:24:34 LOG5 begin_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-20 19:24:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1380.60607910 MHz ...} 2009-Apr-20 19:24:34 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.904212 2009.3033777600326 18.999933 2009-Apr-20 19:24:34 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666724 21.291666666666668 2009-Apr-20 19:24:34 LOG4 log_alfabeam: ALFABEAM 1 8.868904448034041 21.190284663671999 2009-Apr-20 19:24:34 LOG4 log_alfabeam: ALFABEAM 2 8.873075260506589 21.267943404471708 2009-Apr-20 19:24:34 LOG4 log_alfabeam: ALFABEAM 3 8.870980898473590 21.369997781659031 2009-Apr-20 19:24:34 LOG4 log_alfabeam: ALFABEAM 4 8.864338552439788 21.392764971470221 2009-Apr-20 19:24:34 LOG4 log_alfabeam: ALFABEAM 5 8.860136604811006 21.312526783416612 2009-Apr-20 19:24:34 LOG4 log_alfabeam: ALFABEAM 6 8.862606359808455 21.212165840990348 2009-Apr-20 19:24:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000213 2009-Apr-20 19:24:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:24:35 LOG5 begin_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-20 19:24:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:24:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1630606079.0} 2009-Apr-20 19:24:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:24:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:24:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:24:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1380.60607910 MHz ...} 2009-Apr-20 19:24:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84276.00 2009-Apr-20 19:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1630.606079 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:24:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1380.606079 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:24:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.084 (still bad) 2009-Apr-20 19:24:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.599 (still bad) 2009-Apr-20 19:24:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.607 (still bad) 2009-Apr-20 19:24:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.597 (still bad) 2009-Apr-20 19:24:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.598 (still bad) 2009-Apr-20 19:24:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:24:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:24:46 LOG5 end_task: Level: (4) ID = <10083> Status = 0 0 0 0 ok 2009-Apr-20 19:24:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:24:46 LOG5 end_task: Level: (3) ID = <10082> Status = 0 0 0 0 ok 2009-Apr-20 19:24:46 INFO3 smartfreq: Taking CAL-ON at 1383.34045410 MHz ... 2009-Apr-20 19:24:46 LOG4 send_obs_status: To obs_status: <1> PART B2 MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-20 19:24:46 INFO4 set_smart_frequency: Setting frequency 1383.34045410 MHz 2009-Apr-20 19:24:46 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:24:46 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30338 J 2009-Apr-20 19:24:46 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:24:46 LOG2 antvel: Parameters to Doppler: Topocentric 84286 2009 110 0.0 2009-Apr-20 19:24:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:24:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.34045410 rest0=1383.34045410 rest1=1383.34045410 rest2=1383.34045410 rest3=1383.34045410 rest4=1383.34045410 rest5=1383.34045410 rest6=1383.34045410 rest7=1383.34045410 2009-Apr-20 19:24:46 INFO4 dopset_gen: New sky frequencies: 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 1383.340454 2009-Apr-20 19:24:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.340454 sky0=1383.340454 sky1=1383.340454 sky2=1383.340454 sky3=1383.340454 sky4=1383.340454 sky5=1383.340454 sky6=1383.340454 sky7=1383.340454 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:24:46 LOG2 dopset_gen: Result from 'sky2syn': 1633.340454 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:24:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-20 19:24:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:24:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.34045410 MHz}' 2009-Apr-20 19:24:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:24:46 LOG5 begin_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-20 19:24:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.34045410 MHz ...} 2009-Apr-20 19:24:46 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.907554 2009.3033781402896 18.999933 2009-Apr-20 19:24:46 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666651 21.291666666666661 2009-Apr-20 19:24:46 LOG4 log_alfabeam: ALFABEAM 1 8.869020640155055 21.190800156935534 2009-Apr-20 19:24:46 LOG4 log_alfabeam: ALFABEAM 2 8.873101853290535 21.269387637949542 2009-Apr-20 19:24:46 LOG4 log_alfabeam: ALFABEAM 3 8.870890038608632 21.370957053435347 2009-Apr-20 19:24:46 LOG4 log_alfabeam: ALFABEAM 4 8.864222750356754 21.392229923679164 2009-Apr-20 19:24:46 LOG4 log_alfabeam: ALFABEAM 5 8.860113645595932 21.311062309371096 2009-Apr-20 19:24:46 LOG4 log_alfabeam: ALFABEAM 6 8.862697871048843 21.211266240058322 2009-Apr-20 19:24:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000214 2009-Apr-20 19:24:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:24:47 LOG5 begin_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-20 19:24:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:24:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633340454.0} 2009-Apr-20 19:24:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:24:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:24:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:24:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.34045410 MHz ...} 2009-Apr-20 19:24:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84288.00 2009-Apr-20 19:24:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.600 (still bad) 2009-Apr-20 19:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.340454 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:24:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.340454 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:24:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.588 (still bad) 2009-Apr-20 19:24:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.594 (still bad) 2009-Apr-20 19:24:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.587 (still bad) 2009-Apr-20 19:24:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.585 (still bad) 2009-Apr-20 19:24:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.591 (still bad) 2009-Apr-20 19:24:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:24:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:24:58 LOG5 end_task: Level: (4) ID = <10085> Status = 0 0 0 0 ok 2009-Apr-20 19:24:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:24:58 LOG5 end_task: Level: (3) ID = <10084> Status = 0 0 0 0 ok 2009-Apr-20 19:24:58 INFO3 smartfreq: Taking CAL-ON at 1383.53576660 MHz ... 2009-Apr-20 19:24:58 LOG4 send_obs_status: To obs_status: <1> PART B3 MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-20 19:24:58 INFO4 set_smart_frequency: Setting frequency 1383.53576660 MHz 2009-Apr-20 19:24:58 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:24:58 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30338 J 2009-Apr-20 19:24:58 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:24:58 LOG2 antvel: Parameters to Doppler: Topocentric 84298 2009 110 0.0 2009-Apr-20 19:24:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:24:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1383.53576660 rest0=1383.53576660 rest1=1383.53576660 rest2=1383.53576660 rest3=1383.53576660 rest4=1383.53576660 rest5=1383.53576660 rest6=1383.53576660 rest7=1383.53576660 2009-Apr-20 19:24:58 INFO4 dopset_gen: New sky frequencies: 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 1383.535767 2009-Apr-20 19:24:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1383.535767 sky0=1383.535767 sky1=1383.535767 sky2=1383.535767 sky3=1383.535767 sky4=1383.535767 sky5=1383.535767 sky6=1383.535767 sky7=1383.535767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:24:58 LOG2 dopset_gen: Result from 'sky2syn': 1633.535767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:24:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-20 19:24:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:24:58 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1383.53576660 MHz}' 2009-Apr-20 19:24:58 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:24:58 LOG5 begin_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-20 19:24:58 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1383.53576660 MHz ...} 2009-Apr-20 19:24:58 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.910897 2009.3033785205466 18.999933 2009-Apr-20 19:24:58 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666688 21.291666666666671 2009-Apr-20 19:24:58 LOG4 log_alfabeam: ALFABEAM 1 8.869135709702231 21.191339180261540 2009-Apr-20 19:24:58 LOG4 log_alfabeam: ALFABEAM 2 8.873126685210291 21.270831391668580 2009-Apr-20 19:24:58 LOG4 log_alfabeam: ALFABEAM 3 8.870798476720442 21.371891643148597 2009-Apr-20 19:24:58 LOG4 log_alfabeam: ALFABEAM 4 8.864108114730822 21.391671649392318 2009-Apr-20 19:24:58 LOG4 log_alfabeam: ALFABEAM 5 8.860092475402533 21.309599997212516 2009-Apr-20 19:24:58 LOG4 log_alfabeam: ALFABEAM 6 8.862789943729277 21.210391313717672 2009-Apr-20 19:24:59 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000215 2009-Apr-20 19:24:59 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:24:59 LOG5 begin_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-20 19:24:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:24:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1633535767.0} 2009-Apr-20 19:24:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:24:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:24:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:24:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1383.53576660 MHz ...} 2009-Apr-20 19:24:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84300.00 2009-Apr-20 19:25:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.591 (still bad) 2009-Apr-20 19:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1633.535767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:25:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1383.535767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:25:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.582 (still bad) 2009-Apr-20 19:25:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.588 (still bad) 2009-Apr-20 19:25:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.580 (still bad) 2009-Apr-20 19:25:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.581 (still bad) 2009-Apr-20 19:25:10 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:25:10 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:25:10 LOG5 end_task: Level: (4) ID = <10087> Status = 0 0 0 0 ok 2009-Apr-20 19:25:10 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:25:10 LOG5 end_task: Level: (3) ID = <10086> Status = 0 0 0 0 ok 2009-Apr-20 19:25:10 INFO3 smartfreq: Taking CAL-ON at 1384.12170410 MHz ... 2009-Apr-20 19:25:10 LOG4 send_obs_status: To obs_status: <1> PART B4 MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-20 19:25:10 INFO4 set_smart_frequency: Setting frequency 1384.12170410 MHz 2009-Apr-20 19:25:10 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:25:10 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30338 J 2009-Apr-20 19:25:10 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:25:10 LOG2 antvel: Parameters to Doppler: Topocentric 84310 2009 110 0.0 2009-Apr-20 19:25:10 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:25:10 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1384.12170410 rest0=1384.12170410 rest1=1384.12170410 rest2=1384.12170410 rest3=1384.12170410 rest4=1384.12170410 rest5=1384.12170410 rest6=1384.12170410 rest7=1384.12170410 2009-Apr-20 19:25:10 INFO4 dopset_gen: New sky frequencies: 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 1384.121704 2009-Apr-20 19:25:10 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1384.121704 sky0=1384.121704 sky1=1384.121704 sky2=1384.121704 sky3=1384.121704 sky4=1384.121704 sky5=1384.121704 sky6=1384.121704 sky7=1384.121704 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:25:10 LOG2 dopset_gen: Result from 'sky2syn': 1634.121704 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:25:10 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-20 19:25:10 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:25:10 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1384.12170410 MHz}' 2009-Apr-20 19:25:10 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:25:10 LOG5 begin_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-20 19:25:10 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1384.12170410 MHz ...} 2009-Apr-20 19:25:10 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.914239 2009.3033789008036 18.999933 2009-Apr-20 19:25:10 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666699 21.291666666666664 2009-Apr-20 19:25:10 LOG4 log_alfabeam: ALFABEAM 1 8.869249515116522 21.191900639370044 2009-Apr-20 19:25:10 LOG4 log_alfabeam: ALFABEAM 2 8.873149747560463 21.272272691299058 2009-Apr-20 19:25:10 LOG4 log_alfabeam: ALFABEAM 3 8.870706349434418 21.372800617366192 2009-Apr-20 19:25:10 LOG4 log_alfabeam: ALFABEAM 4 8.863994785526762 21.391091279128631 2009-Apr-20 19:25:10 LOG4 log_alfabeam: ALFABEAM 5 8.860073094722631 21.308141834831456 2009-Apr-20 19:25:10 LOG4 log_alfabeam: ALFABEAM 6 8.862882442301595 21.209541868739386 2009-Apr-20 19:25:10 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000216 2009-Apr-20 19:25:11 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:25:11 LOG5 begin_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-20 19:25:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.585 (still bad) 2009-Apr-20 19:25:11 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:25:11 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1634121704.0} 2009-Apr-20 19:25:11 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:25:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:25:11 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:25:11 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1384.12170410 MHz ...} 2009-Apr-20 19:25:11 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84312.00 2009-Apr-20 19:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1634.121704 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:25:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.566 (still bad) 2009-Apr-20 19:25:13 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1384.121704 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:25:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.567 (still bad) 2009-Apr-20 19:25:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.567 (still bad) 2009-Apr-20 19:25:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.566 (still bad) 2009-Apr-20 19:25:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.565 (still bad) 2009-Apr-20 19:25:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:25:22 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:25:22 LOG5 end_task: Level: (4) ID = <10089> Status = 0 0 0 0 ok 2009-Apr-20 19:25:22 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:25:22 LOG5 end_task: Level: (3) ID = <10088> Status = 0 0 0 0 ok 2009-Apr-20 19:25:22 INFO3 smartfreq: Taking CAL-ON at 1385.29357910 MHz ... 2009-Apr-20 19:25:22 LOG4 send_obs_status: To obs_status: <1> PART B5 MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-20 19:25:22 INFO4 set_smart_frequency: Setting frequency 1385.29357910 MHz 2009-Apr-20 19:25:22 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:25:22 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30338 J 2009-Apr-20 19:25:22 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:25:22 LOG2 antvel: Parameters to Doppler: Topocentric 84322 2009 110 0.0 2009-Apr-20 19:25:22 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:25:22 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.29357910 rest0=1385.29357910 rest1=1385.29357910 rest2=1385.29357910 rest3=1385.29357910 rest4=1385.29357910 rest5=1385.29357910 rest6=1385.29357910 rest7=1385.29357910 2009-Apr-20 19:25:22 INFO4 dopset_gen: New sky frequencies: 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 1385.293579 2009-Apr-20 19:25:22 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.293579 sky0=1385.293579 sky1=1385.293579 sky2=1385.293579 sky3=1385.293579 sky4=1385.293579 sky5=1385.293579 sky6=1385.293579 sky7=1385.293579 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:25:22 LOG2 dopset_gen: Result from 'sky2syn': 1635.293579 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:25:22 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-20 19:25:22 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:25:22 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.29357910 MHz}' 2009-Apr-20 19:25:22 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:25:22 LOG5 begin_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-20 19:25:22 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.29357910 MHz ...} 2009-Apr-20 19:25:22 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.917582 2009.3033792810606 18.999933 2009-Apr-20 19:25:22 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666688 21.291666666666682 2009-Apr-20 19:25:22 LOG4 log_alfabeam: ALFABEAM 1 8.869362055672099 21.192484060638840 2009-Apr-20 19:25:22 LOG4 log_alfabeam: ALFABEAM 2 8.873171064103504 21.273711310508020 2009-Apr-20 19:25:22 LOG4 log_alfabeam: ALFABEAM 3 8.870613683511909 21.373684208209347 2009-Apr-20 19:25:22 LOG4 log_alfabeam: ALFABEAM 4 8.863882762318465 21.390489298378601 2009-Apr-20 19:25:22 LOG4 log_alfabeam: ALFABEAM 5 8.860055476035825 21.306688035733181 2009-Apr-20 19:25:22 LOG4 log_alfabeam: ALFABEAM 6 8.862975342003747 21.208717619926375 2009-Apr-20 19:25:22 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000217 2009-Apr-20 19:25:23 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:25:23 LOG5 begin_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-20 19:25:23 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:25:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635293579.0} 2009-Apr-20 19:25:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:25:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:25:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:25:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.567 (still bad) 2009-Apr-20 19:25:23 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.29357910 MHz ...} 2009-Apr-20 19:25:23 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84324.00 2009-Apr-20 19:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.293579 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:25:25 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.293579 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:25:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.538 (still bad) 2009-Apr-20 19:25:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.538 (still bad) 2009-Apr-20 19:25:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.536 (still bad) 2009-Apr-20 19:25:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.536 (still bad) 2009-Apr-20 19:25:33 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-20 19:25:33 LOG4 check_wapp_levels: WAPP-1 power levels: 1.404 1.223 1.439 1.470 2009-Apr-20 19:25:33 LOG4 check_wapp_levels: WAPP-2 power levels: 1.403 1.337 1.490 1.234 2009-Apr-20 19:25:33 LOG4 check_wapp_levels: WAPP-3 power levels: 1.537 1.318 1.444 1.311 2009-Apr-20 19:25:33 LOG4 check_wapp_levels: WAPP-4 power levels: 1.284 0.106 1.415 0.130 2009-Apr-20 19:25:34 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:25:34 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:25:34 LOG5 end_task: Level: (4) ID = <10091> Status = 0 0 0 0 ok 2009-Apr-20 19:25:34 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:25:34 LOG5 end_task: Level: (3) ID = <10090> Status = 0 0 0 0 ok 2009-Apr-20 19:25:34 INFO3 smartfreq: Taking CAL-ON at 1385.68420410 MHz ... 2009-Apr-20 19:25:34 LOG4 send_obs_status: To obs_status: <1> PART B6 MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-20 19:25:34 INFO4 set_smart_frequency: Setting frequency 1385.68420410 MHz 2009-Apr-20 19:25:34 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:25:34 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30338 J 2009-Apr-20 19:25:34 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:25:34 LOG2 antvel: Parameters to Doppler: Topocentric 84334 2009 110 0.0 2009-Apr-20 19:25:34 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:25:34 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.68420410 rest0=1385.68420410 rest1=1385.68420410 rest2=1385.68420410 rest3=1385.68420410 rest4=1385.68420410 rest5=1385.68420410 rest6=1385.68420410 rest7=1385.68420410 2009-Apr-20 19:25:34 INFO4 dopset_gen: New sky frequencies: 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 1385.684204 2009-Apr-20 19:25:34 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.684204 sky0=1385.684204 sky1=1385.684204 sky2=1385.684204 sky3=1385.684204 sky4=1385.684204 sky5=1385.684204 sky6=1385.684204 sky7=1385.684204 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:25:34 LOG2 dopset_gen: Result from 'sky2syn': 1635.684204 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:25:34 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-20 19:25:34 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:25:34 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1385.68420410 MHz}' 2009-Apr-20 19:25:34 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:25:34 LOG5 begin_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-20 19:25:34 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1385.68420410 MHz ...} 2009-Apr-20 19:25:34 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.920924 2009.3033796613179 18.999933 2009-Apr-20 19:25:34 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666681 21.291666666666664 2009-Apr-20 19:25:34 LOG4 log_alfabeam: ALFABEAM 1 8.869473199310196 21.193088252373887 2009-Apr-20 19:25:34 LOG4 log_alfabeam: ALFABEAM 2 8.873190635711815 21.275145325950511 2009-Apr-20 19:25:34 LOG4 log_alfabeam: ALFABEAM 3 8.870520615949868 21.374541637463800 2009-Apr-20 19:25:34 LOG4 log_alfabeam: ALFABEAM 4 8.863772175329489 21.389866931496559 2009-Apr-20 19:25:34 LOG4 log_alfabeam: ALFABEAM 5 8.860039610392686 21.305240524574085 2009-Apr-20 19:25:34 LOG4 log_alfabeam: ALFABEAM 6 8.863068507850423 21.207919224009395 2009-Apr-20 19:25:34 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000218 2009-Apr-20 19:25:35 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:25:35 LOG5 begin_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-20 19:25:35 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:25:35 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635684204.0} 2009-Apr-20 19:25:35 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:25:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:25:35 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:25:35 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1385.68420410 MHz ...} 2009-Apr-20 19:25:35 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84336.00 2009-Apr-20 19:25:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.537 (still bad) 2009-Apr-20 19:25:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.684204 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:25:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:25:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:25:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:25:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:25:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:25:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:25:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:25:37 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.684204 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:25:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.529 (still bad) 2009-Apr-20 19:25:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.532 (still bad) 2009-Apr-20 19:25:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.531 (still bad) 2009-Apr-20 19:25:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.529 (still bad) 2009-Apr-20 19:25:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.529 (still bad) 2009-Apr-20 19:25:46 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:25:46 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:25:46 LOG5 end_task: Level: (4) ID = <10093> Status = 0 0 0 0 ok 2009-Apr-20 19:25:46 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:25:46 LOG5 end_task: Level: (3) ID = <10092> Status = 0 0 0 0 ok 2009-Apr-20 19:25:46 INFO3 smartfreq: Taking CAL-ON at 1386.66076660 MHz ... 2009-Apr-20 19:25:46 LOG4 send_obs_status: To obs_status: <1> PART B7 MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-20 19:25:46 INFO4 set_smart_frequency: Setting frequency 1386.66076660 MHz 2009-Apr-20 19:25:46 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:25:46 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30338 J 2009-Apr-20 19:25:46 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:25:46 LOG2 antvel: Parameters to Doppler: Topocentric 84346 2009 110 0.0 2009-Apr-20 19:25:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:25:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1386.66076660 rest0=1386.66076660 rest1=1386.66076660 rest2=1386.66076660 rest3=1386.66076660 rest4=1386.66076660 rest5=1386.66076660 rest6=1386.66076660 rest7=1386.66076660 2009-Apr-20 19:25:46 INFO4 dopset_gen: New sky frequencies: 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 1386.660767 2009-Apr-20 19:25:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1386.660767 sky0=1386.660767 sky1=1386.660767 sky2=1386.660767 sky3=1386.660767 sky4=1386.660767 sky5=1386.660767 sky6=1386.660767 sky7=1386.660767 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:25:46 LOG2 dopset_gen: Result from 'sky2syn': 1636.660767 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:25:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-20 19:25:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:25:46 LOG4 take_data: Calling 'take_data 10 1 SMARTF ON stat_cal_on {CAL-ON at 1386.66076660 MHz}' 2009-Apr-20 19:25:46 START begin_task: Starting task 'WAPP+GALFA spectral observation' 2009-Apr-20 19:25:46 LOG5 begin_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-20 19:25:46 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON at 1386.66076660 MHz ...} 2009-Apr-20 19:25:46 LOG5 log_alfabeam: Parameters: 8.8666666666666671 21.291666666666668 8.924267 2009.3033800415749 18.999826 2009-Apr-20 19:25:46 LOG4 log_alfabeam: ALFABEAM 0 8.866666666666715 21.291666666666668 2009-Apr-20 19:25:46 LOG4 log_alfabeam: ALFABEAM 1 8.869582962637351 21.193712777769321 2009-Apr-20 19:25:46 LOG4 log_alfabeam: ALFABEAM 2 8.873208492335019 21.276574757446514 2009-Apr-20 19:25:46 LOG4 log_alfabeam: ALFABEAM 3 8.870427161745980 21.375373352790493 2009-Apr-20 19:25:46 LOG4 log_alfabeam: ALFABEAM 4 8.863663005914011 21.389224619671104 2009-Apr-20 19:25:46 LOG4 log_alfabeam: ALFABEAM 5 8.860025465053726 21.303799259937943 2009-Apr-20 19:25:46 LOG4 log_alfabeam: ALFABEAM 6 8.863161927432833 21.207146191202543 2009-Apr-20 19:25:46 INFO2 take_data: Starting WAPP+GALFA 10-second scan: 911000219 2009-Apr-20 19:25:47 START begin_task: Starting task 'waiting on WAPP+GALFA spectra' 2009-Apr-20 19:25:47 LOG5 begin_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-20 19:25:47 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:25:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1636660767.0} 2009-Apr-20 19:25:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:25:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:25:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:25:47 LOG4 send_obs_status: To obs_status: <0> TASKTIME 10 BITMAP stat_cal_on MESSAGE {Taking CAL-ON at 1386.66076660 MHz ...} 2009-Apr-20 19:25:47 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84348.00 2009-Apr-20 19:25:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.529 (still bad) 2009-Apr-20 19:25:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1636.660767 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:25:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:25:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:25:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:25:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:25:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:25:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:25:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:25:49 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1386.660767 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:25:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.526 (still bad) 2009-Apr-20 19:25:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.529 (still bad) 2009-Apr-20 19:25:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.527 (still bad) 2009-Apr-20 19:25:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.525 (still bad) 2009-Apr-20 19:25:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:25:58 STOP end_task: Finishing task 'waiting on WAPP+GALFA spectra' with status 'OK' 2009-Apr-20 19:25:58 LOG5 end_task: Level: (4) ID = <10095> Status = 0 0 0 0 ok 2009-Apr-20 19:25:58 STOP end_task: Finishing task 'WAPP+GALFA spectral observation' with status 'OK' 2009-Apr-20 19:25:58 LOG5 end_task: Level: (3) ID = <10094> Status = 0 0 0 0 ok 2009-Apr-20 19:25:58 INFO2 smartfreq: Switching off CAL 2009-Apr-20 19:25:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-20 19:25:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-20 19:25:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-20 19:25:58 LOG5 begin_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-20 19:25:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.525 (still bad) 2009-Apr-20 19:25:58 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-20 19:25:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-20 19:25:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-20 19:25:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-20 19:25:58 LOG5 end_task: Level: (3) ID = <10096> Status = 0 0 0 0 ok 2009-Apr-20 19:25:58 INFO3 restore_frequencies: Restoring original frequencies 2009-Apr-20 19:25:58 LOG5 antvel: Calling 'antvel 85200.000000 211730.000000 J Topocentric 0' 2009-Apr-20 19:25:58 LOG2 antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30338 J 2009-Apr-20 19:25:58 LOG2 antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:25:58 LOG2 antvel: Parameters to Doppler: Topocentric 84358 2009 110 0.0 2009-Apr-20 19:25:58 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:25:58 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-20 19:25:58 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-20 19:25:58 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:25:58 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:25:58 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-20 19:25:58 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:25:58 STOP finish_task: Finishing task 'smart frequency switching' 2009-Apr-20 19:25:58 LOG5 finish_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-20 19:25:58 DONE finish_task: DONE finished pattern: smart frequency switching 2009-Apr-20 19:25:58 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:25:58 END end_task: Finishing task 'smart frequency switching' with status 'OK' 2009-Apr-20 19:25:58 LOG5 end_task: Level: (2) ID = <10027> Status = 0 0 0 0 ok 2009-Apr-20 19:25:59 NOTE run_command_file: DONE with command file processing 2009-Apr-20 19:25:59 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Running Command File} 2009-Apr-20 19:25:59 STOP finish_task: Finishing task 'running command file 'command_galfasrc09.cmd'' 2009-Apr-20 19:25:59 LOG5 finish_task: Level: (1) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-20 19:25:59 DONE finish_task: DONE finished running: command file 'command_galfasrc09.cmd' 2009-Apr-20 19:25:59 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:25:59 END end_task: Finishing task 'running command file 'command_galfasrc09.cmd'' with status 'OK' 2009-Apr-20 19:25:59 LOG5 end_task: Level: (1) ID = <10009> Status = 0 0 0 0 ok 2009-Apr-20 19:25:59 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-20 19:25:59 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:25:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:25:59 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:26:09 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-20 19:26:09 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-20 19:26:09 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-20 19:26:09 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-20 19:26:09 LOG5 begin_task: Level: (1) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-20 19:26:09 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-20 19:26:09 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-20 19:26:09 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-20 19:26:09 LOG5 end_task: Level: (1) ID = <10097> Status = 0 0 0 0 ok 2009-Apr-20 19:26:09 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-20 19:26:09 LOG3 exec_msg: Closing socket 2009-Apr-20 19:26:09 LOG3 exec_msg: Closing socket 2009-Apr-20 19:26:09 LOG3 exec_msg: Closing socket 2009-Apr-20 19:26:09 LOG3 exec_msg: Closing socket 2009-Apr-20 19:26:12 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-20 19:26:12 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-20 19:26:12 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-20 19:26:12 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-20 19:26:21 NOTE CIMA-load_config_file: Loading and applying configuration file 'a2010_az180_2009.conf' 2009-Apr-20 19:26:21 LOG2 CIMA-antvel: Precessing RA = 08:52:00.0 Dec = +21:17:30.0 Epoch = 2009.30338 J 2009-Apr-20 19:26:21 LOG2 CIMA-antvel: Computed apparent RA = 08:52:33.4 Dec = +21:15:23.7 2009-Apr-20 19:26:21 LOG2 CIMA-antvel: Parameters to Doppler: Topocentric 84381 2009 110 0.0 2009-Apr-20 19:26:21 INFO5 CIMA-antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fast_config) "yes" 2009-Apr-20 19:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(config_type) "standard" 2009-Apr-20 19:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(receiver) "alfa" 2009-Apr-20 19:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(quick_tsys) "no" 2009-Apr-20 19:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifsetup_only) "no" 2009-Apr-20 19:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(retrack_source) "yes" 2009-Apr-20 19:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(path) "ALFA" 2009-Apr-20 19:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(restcent) "1385.0" 2009-Apr-20 19:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest1) "1385.0" 2009-Apr-20 19:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest2) "1385.0" 2009-Apr-20 19:26:21 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest3) "1385.0" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest4) "1385.0" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest5) "1385.0" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest6) "1385.0" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest7) "1385.0" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rest8) "1385.0" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest1) "250" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest2) "250" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest3) "250" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(dest4) "250" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq1) "0.000000" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq2) "0.000000" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq3) "0.000000" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq4) "0.000000" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq5) "0.000000" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq6) "0.000000" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq7) "0.000000" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(synfrq8) "0.000000" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calctype) "SUBBAND" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(backends) "WAPP" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(radarblanker) "off" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(polsel) "skip" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(filtersel) "alfafb 1" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sbshcl) "T" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(shcl) "skip" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfnum) "skip" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(zmnormal) "T" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(rfattn) "11 11" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifnum) "6" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(up) "1635.000000" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ifattn) "0 0" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(fiber) "T" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(ac2sw) "skip" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phbsig) "skip" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(hybrid) "skip" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(phblo) "skip" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(xfnormal) "T" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(sigsrc) "gr" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(gain) "8 8" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(inpfrq) "alfa" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(mixer) "750 750 750 750 750 750 750 750" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vlbainp) "skip" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(syndest) "3 3 3 3 3 3 3 3" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calsrc) "3" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(750nb) "skip" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2to12wb) "F" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(calrcvr) "15" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(2a2b30if) "skip" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(vis30mhz) "gr" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global iflo ; set iflo(430blnk) "F" 2009-Apr-20 19:26:22 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-20 19:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-20 19:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-20 19:26:23 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-20 19:26:23 COMMAND CIMA-send_to_exec: Sending command to apply receiver IF/LO set-up 2009-Apr-20 19:26:23 LOG4 exec_msg: From OBSERVER: config_iflo 2009-Apr-20 19:26:23 BEGIN begin_task: Starting task 'configuring IF/LO path' 2009-Apr-20 19:26:23 LOG5 begin_task: Level: (1) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-20 19:26:23 INFO1 config_iflo: Starting to configure IF/LO path for ALFA 2009-Apr-20 19:26:23 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring IF/LO path} TASKWAIT BITMAP stat_iflo INFO {Setting up the IF/LO path ...} 2009-Apr-20 19:26:23 LOG1 config_iflo: Receiver ALFA already selected 2009-Apr-20 19:26:23 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-20 19:26:23 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:26:23 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-20 19:26:23 LOG5 begin_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-20 19:26:23 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-20 19:26:23 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-20 19:26:23 LOG5 end_task: Level: (2) ID = <10099> Status = 0 0 0 0 ok 2009-Apr-20 19:26:23 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-20 19:26:23 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:26:23 LOG3 config_iflo: Skipping filter command 'alfafb 1' since system already is properly set 2009-Apr-20 19:26:23 LOG3 send_ifx: Skipping if1-command 'if1_sbshcl T' since system already is properly set 2009-Apr-20 19:26:23 LOG5 send_ifx: Skipping if1-command 'if1_shcl skip' since not applicable 2009-Apr-20 19:26:23 LOG5 send_ifx: Skipping if1-command 'if1_rfnum skip' since not applicable 2009-Apr-20 19:26:23 LOG3 send_ifx: Skipping if1-command 'if1_zmnormal T' since system already is properly set 2009-Apr-20 19:26:23 LOG3 send_ifx: Skipping if1-command 'if1_rfattn 11 11' since system already is properly set 2009-Apr-20 19:26:23 LOG3 send_ifx: Skipping if1-command 'if1_ifnum 6' since system already is properly set 2009-Apr-20 19:26:23 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-20 19:26:23 LOG3 send_ifx: Skipping if1-command 'if1_ifattn 0 0' since system already is properly set 2009-Apr-20 19:26:23 LOG3 send_ifx: Skipping if1-command 'if1_fiber T' since system already is properly set 2009-Apr-20 19:26:23 LOG5 send_ifx: Skipping if1-command 'if1_ac2sw skip' since not applicable 2009-Apr-20 19:26:23 LOG5 send_ifx: Skipping if1-command 'if1_phbsig skip' since not applicable 2009-Apr-20 19:26:23 LOG5 send_ifx: Skipping if1-command 'if1_hybrid skip' since not applicable 2009-Apr-20 19:26:23 LOG5 send_ifx: Skipping if1-command 'if1_phblo skip' since not applicable 2009-Apr-20 19:26:23 LOG5 send_ifx: Skipping if1-command 'if1_750nb skip' since not applicable 2009-Apr-20 19:26:23 LOG3 send_ifx: Skipping if1-command 'if1_2to12wb F' since system already is properly set 2009-Apr-20 19:26:23 LOG3 send_ifx: Skipping if1-command 'if1_calrcvr 15' since system already is properly set 2009-Apr-20 19:26:23 LOG3 send_ifx: Skipping if2-command 'if2_xfnormal T' since system already is properly set 2009-Apr-20 19:26:23 LOG3 send_ifx: Skipping if2-command 'if2_sigsrc gr' since system already is properly set 2009-Apr-20 19:26:23 LOG3 vw_send: To DATATAKING: if2 {if2_gain 8 8} 2009-Apr-20 19:26:23 LOG3 send_ifx: Skipping if2-command 'if2_inpfrq alfa' since system already is properly set 2009-Apr-20 19:26:23 LOG3 send_ifx: Skipping if2-command 'if2_mixer 750 750 750 750 750 750 750 750' since system already is properly set 2009-Apr-20 19:26:23 LOG5 send_ifx: Skipping if2-command 'if2_vlbainp skip' since not applicable 2009-Apr-20 19:26:23 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:26:23 LOG3 send_ifx: Skipping if2-command 'if2_syndest 3 3 3 3 3 3 3 3' since system already is properly set 2009-Apr-20 19:26:23 LOG3 send_ifx: Skipping if2-command 'if2_calsrc 3' since system already is properly set 2009-Apr-20 19:26:23 LOG5 send_ifx: Skipping if2-command 'if2_2a2b30if skip' since not applicable 2009-Apr-20 19:26:23 LOG3 send_ifx: Skipping if2-command 'if2_vis30mhz gr' since system already is properly set 2009-Apr-20 19:26:23 LOG3 send_ifx: Skipping if2-command 'if2_430blnk F' since system already is properly set 2009-Apr-20 19:26:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'configuring IF/LO path' using string 'DONE' 2009-Apr-20 19:26:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:26:23 START begin_task: Starting task 'waiting on configuring IF/LO path' 2009-Apr-20 19:26:23 LOG5 begin_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-20 19:26:23 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-20 19:26:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_gain 8 8} 2009-Apr-20 19:26:23 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:26:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:26:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:26:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:26:23 LOG4 got_cormsg: From DATATAKING: vw% DONE 2009-Apr-20 19:26:23 STOP end_task: Finishing task 'waiting on configuring IF/LO path' with status 'OK' 2009-Apr-20 19:26:23 LOG5 end_task: Level: (2) ID = <10100> Status = 0 0 0 0 ok 2009-Apr-20 19:26:23 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'configuring IF/LO path' 2009-Apr-20 19:26:23 STOP finish_task: Finishing task 'configuring IF/LO path' 2009-Apr-20 19:26:23 LOG5 finish_task: Level: (1) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-20 19:26:23 DONE finish_task: DONE finished configuration: IF/LO path 2009-Apr-20 19:26:23 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:26:23 END end_task: Finishing task 'configuring IF/LO path' with status 'OK' 2009-Apr-20 19:26:23 LOG5 end_task: Level: (1) ID = <10098> Status = 0 0 0 0 ok 2009-Apr-20 19:26:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:26:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-20 19:26:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-20 19:26:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-20 19:26:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-20 19:26:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-20 19:26:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-20 19:26:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-20 19:26:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-20 19:26:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-20 19:26:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-20 19:26:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-20 19:26:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-20 19:26:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-20 19:26:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-20 19:26:24 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-20 19:26:24 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-20 19:26:24 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-20 19:26:24 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-20 19:26:24 LOG5 begin_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-20 19:26:24 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-20 19:26:24 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-20 19:26:24 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-20 19:26:24 START begin_task: Starting task 'selecting calibration port' 2009-Apr-20 19:26:24 LOG5 begin_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-20 19:26:24 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-20 19:26:24 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-20 19:26:24 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:26:24 START begin_task: Starting task 'waiting on calport' 2009-Apr-20 19:26:24 LOG5 begin_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-20 19:26:24 LOG5 CIMA-load_config_file: ALFA is already centered on beam 0. 2009-Apr-20 19:26:24 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-20 19:26:24 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:26:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:26:24 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:26:24 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-20 19:26:24 LOG5 end_task: Level: (3) ID = <10103> Status = 0 0 0 0 ok 2009-Apr-20 19:26:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-20 19:26:24 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-20 19:26:24 LOG5 end_task: Level: (2) ID = <10102> Status = 0 0 0 0 ok 2009-Apr-20 19:26:24 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-20 19:26:24 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-20 19:26:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-20 19:26:24 LOG5 begin_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-20 19:26:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:26:25 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-20 19:26:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-20 19:26:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-20 19:26:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-20 19:26:25 LOG5 end_task: Level: (2) ID = <10104> Status = 0 0 0 0 ok 2009-Apr-20 19:26:25 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-20 19:26:25 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-20 19:26:25 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-20 19:26:25 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-20 19:26:25 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-20 19:26:25 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-20 19:26:25 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-20 19:26:25 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-20 19:26:25 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-20 19:26:25 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-20 19:26:25 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-20 19:26:25 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-20 19:26:25 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-20 19:26:25 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-20 19:26:25 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-20 19:26:25 LOG5 begin_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-20 19:26:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-20 19:26:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-20 19:26:25 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-20 19:26:25 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-20 19:26:25 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-20 19:26:25 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-20 19:26:25 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-20 19:26:25 LOG5 end_task: Level: (2) ID = <10105> Status = 0 0 0 0 ok 2009-Apr-20 19:26:25 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-20 19:26:25 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-20 19:26:25 LOG5 finish_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-20 19:26:25 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-20 19:26:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:26:25 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-20 19:26:25 LOG5 end_task: Level: (1) ID = <10101> Status = 0 0 0 0 ok 2009-Apr-20 19:26:25 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-20 19:26:25 COMMAND CIMA-send_to_exec: Sending command to rotate ALFA 2009-Apr-20 19:26:25 LOG4 exec_msg: From OBSERVER: rotate_alfa 19 nowait 2009-Apr-20 19:26:25 BEGIN begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-20 19:26:25 LOG5 begin_task: Level: (1) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-20 19:26:25 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-20 19:26:25 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-20 19:26:25 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19 REPLY 2009-Apr-20 19:26:25 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-20 19:26:25 LOG5 finish_task: Level: (1) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-20 19:26:25 DONE finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-20 19:26:25 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:26:25 END end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-20 19:26:25 LOG5 end_task: Level: (1) ID = <10106> Status = 0 0 0 0 ok 2009-Apr-20 19:26:26 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-20 19:26:26 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-20 19:26:26 NOTE CIMA-load_config_file: Configuration file 'a2010_az180_2009.conf' applied. 2009-Apr-20 19:26:46 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-20 19:26:46 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-20 19:26:46 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:26:46 LOG5 begin_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-20 19:26:46 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-20 19:26:46 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-20 19:26:46 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-20 19:26:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-20 19:26:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:26:46 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-20 19:26:46 LOG5 begin_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-20 19:26:46 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-20 19:26:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:26:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:26:49 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:26:49 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-20 19:26:49 LOG5 end_task: Level: (2) ID = <10108> Status = 0 0 0 0 ok 2009-Apr-20 19:26:49 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-20 19:26:49 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:26:49 LOG5 begin_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-20 19:26:49 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-20 19:26:49 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:26:49 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:26:49 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:26:49 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:26:49 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-20 19:26:49 LOG5 begin_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-20 19:26:49 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-20 19:26:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:26:49 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-20 19:26:49 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 3 dB 2009-Apr-20 19:26:49 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2009-Apr-20 19:26:49 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-20 19:26:49 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-20 19:26:49 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-20 19:26:49 LOG5 end_task: Level: (3) ID = <10110> Status = 0 0 0 0 ok 2009-Apr-20 19:26:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.008 0.901 ALFA beam 1: 1.048 1.076 2009-Apr-20 19:26:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.007 0.966 ALFA beam 3: 1.055 0.876 2009-Apr-20 19:26:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.073 0.916 ALFA beam 5: 1.035 0.967 2009-Apr-20 19:26:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.884 0.103 ALFA beam 7: 0.982 0.126 2009-Apr-20 19:26:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:26:50 LOG5 finish_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-20 19:26:50 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-20 19:26:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:26:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-20 19:26:50 LOG5 end_task: Level: (2) ID = <10109> Status = 0 0 0 0 ok 2009-Apr-20 19:26:50 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-20 19:26:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:26:50 LOG5 finish_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-20 19:26:50 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-20 19:26:50 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:26:50 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-20 19:26:50 LOG5 end_task: Level: (1) ID = <10107> Status = 0 0 0 0 ok 2009-Apr-20 19:26:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-20 19:26:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 0.901 1.048 1.076 2009-Apr-20 19:26:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.007 0.966 1.055 0.876 2009-Apr-20 19:26:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.916 1.035 0.967 2009-Apr-20 19:26:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.884 0.103 0.982 0.126 2009-Apr-20 19:26:53 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-20 19:26:53 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift88p1 085700.0 +211730 J 0 Topocentric velocity(optical) 2009-Apr-20 19:26:53 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift88p1 085700.0 +211730 J 0 Topocentric velocity(optical)' 2009-Apr-20 19:26:53 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-20 19:26:53 LOG5 begin_task: Level: (1) ID = <10111> Status = 0 0 0 0 ok 2009-Apr-20 19:26:53 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'galfasrc' 2009-Apr-20 19:26:53 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-20 19:26:54 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift88p1} 2009-Apr-20 19:26:54 INFO5 fixed_driftmap: Start: year = 2009.3033821646768 RA = 08:57:33.3 Dec = +21:15:20.5 2009-Apr-20 19:26:54 NOTE fixed_driftmap: Setting ZA to 2:54:06.8 ... 2009-Apr-20 19:26:54 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 2.90 2009-Apr-20 19:26:54 LOG3 track_source: Calling 'track_source drift88p1 180.0 2.9018945437 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-20 19:26:54 START begin_task: Starting task 'sending tracking commands' 2009-Apr-20 19:26:54 LOG5 begin_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-20 19:26:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift88p1} INFO {Slewing to source 'drift88p1' ...} 2009-Apr-20 19:26:54 INFO1 track_source: Starting to track drift88p1 2009-Apr-20 19:26:54 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift88p1" 2009-Apr-20 19:26:54 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-20 19:26:54 LOG3 vw_send: To DATATAKING: set dec 2.9018945437 2009-Apr-20 19:26:54 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-20 19:26:54 LOG3 vw_send: To DATATAKING: pnt tr 180.0 2.9018945437 -CF 2009-Apr-20 19:26:54 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-20 19:26:54 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-20 19:26:54 LOG5 finish_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-20 19:26:54 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-20 19:26:54 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:26:54 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-20 19:26:54 LOG5 end_task: Level: (2) ID = <10112> Status = 0 0 0 0 ok 2009-Apr-20 19:26:54 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-20 19:26:54 LOG5 begin_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-20 19:26:54 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-20 19:26:54 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-20 19:26:54 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-20 19:26:54 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-20 19:26:54 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-20 19:26:54 LOG5 begin_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-20 19:26:54 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift88p1" 2009-Apr-20 19:26:54 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-20 19:26:54 LOG4 got_cormsg: From DATATAKING: set dec 2.9018945437 2009-Apr-20 19:26:54 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-20 19:26:54 LOG4 got_cormsg: From DATATAKING: vw% 2.9018945437 2009-Apr-20 19:26:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:26:54 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-20 19:26:54 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 2.9018945437 -CF 2009-Apr-20 19:26:54 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-20 19:26:54 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-20 19:26:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:26:55 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-20 19:26:55 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-20 19:26:55 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-20 19:26:55 LOG5 end_task: Level: (3) ID = <10114> Status = 0 0 0 0 ok 2009-Apr-20 19:26:55 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-20 19:26:55 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-20 19:26:55 LOG5 finish_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-20 19:26:55 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-20 19:26:55 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:26:55 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-20 19:26:55 LOG5 end_task: Level: (2) ID = <10113> Status = 0 0 0 0 ok 2009-Apr-20 19:26:55 START begin_task: Starting task 'waiting on telescope' 2009-Apr-20 19:26:55 LOG5 begin_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-20 19:26:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-20 19:26:55 LOG3 waittrk: Start waittrk 5 2009-Apr-20 19:26:55 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-20 19:26:55 LOG5 begin_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-20 19:27:00 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-20 19:27:00 LOG5 end_task: Level: (3) ID = <10116> Status = 0 0 0 0 ok 2009-Apr-20 19:27:00 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-20 19:27:00 LOG5 begin_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-20 19:27:52 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-20 19:27:52 LOG5 end_task: Level: (3) ID = <10117> Status = 0 0 0 0 ok 2009-Apr-20 19:27:52 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-20 19:27:52 INFO2 waittrk: Now tracking drift88p1 2009-Apr-20 19:27:52 LOG4 waittrk: Current telescope position: Az = 179.76 ZA = 2.92 2009-Apr-20 19:27:52 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-20 19:27:52 LOG5 finish_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-20 19:27:52 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-20 19:27:52 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:27:52 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-20 19:27:52 LOG5 end_task: Level: (2) ID = <10115> Status = 0 0 0 0 ok 2009-Apr-20 19:27:52 START begin_task: Starting task 'selecting calibration type' 2009-Apr-20 19:27:52 LOG5 begin_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-20 19:27:52 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-20 19:27:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-20 19:27:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:27:52 START begin_task: Starting task 'waiting on setcal' 2009-Apr-20 19:27:52 LOG5 begin_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-20 19:27:52 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-20 19:27:52 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:27:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:27:52 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:27:52 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-20 19:27:52 LOG5 end_task: Level: (3) ID = <10119> Status = 0 0 0 0 ok 2009-Apr-20 19:27:52 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-20 19:27:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-20 19:27:52 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-20 19:27:52 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-20 19:27:52 LOG5 begin_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-20 19:27:52 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:27:52 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-20 19:27:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-20 19:27:52 LOG5 end_task: Level: (3) ID = <10120> Status = 0 0 0 0 ok 2009-Apr-20 19:27:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-20 19:27:52 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-20 19:27:52 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-20 19:27:52 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:27:52 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-20 19:27:52 LOG5 begin_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-20 19:27:52 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-20 19:27:52 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-20 19:27:52 LOG5 end_task: Level: (3) ID = <10121> Status = 0 0 0 0 ok 2009-Apr-20 19:27:52 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-20 19:27:52 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:27:52 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-20 19:27:52 LOG5 end_task: Level: (2) ID = <10118> Status = 0 0 0 0 ok 2009-Apr-20 19:27:52 LOG5 dopset_later: Calling 'dopset_later 0' 2009-Apr-20 19:27:52 INFO3 dopset_later: Setting Doppler correction now 2009-Apr-20 19:27:52 LOG5 antvel: Calling 'antvel 180.000000 2.901895 F Topocentric 0' 2009-Apr-20 19:27:52 LOG2 antvel: Transforming current Az = 180.00 ZA = 2.90 to apparent RA = 08:57:33.7 Dec = +21:15:20.5 2009-Apr-20 19:27:52 LOG2 antvel: Parameters to Doppler: Topocentric 84472 2009 110 0.0 2009-Apr-20 19:27:52 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:27:52 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-20 19:27:52 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-20 19:27:52 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:27:52 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:27:52 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-20 19:27:52 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:27:52 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:27:52 LOG5 begin_task: Level: (2) ID = <10122> Status = 0 0 0 0 ok 2009-Apr-20 19:27:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-20 19:27:52 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-20 19:27:52 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-20 19:27:52 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-20 19:27:52 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:27:52 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-20 19:27:52 LOG5 begin_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-20 19:27:52 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-20 19:27:52 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:27:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-20 19:27:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:27:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:27:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:27:55 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:27:55 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:27:55 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-20 19:27:55 LOG5 end_task: Level: (3) ID = <10123> Status = 0 0 0 0 ok 2009-Apr-20 19:27:55 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-20 19:27:55 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:27:55 LOG5 begin_task: Level: (3) ID = <10124> Status = 0 0 0 0 ok 2009-Apr-20 19:27:55 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-20 19:27:55 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:27:55 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:27:55 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:27:55 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:27:56 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-20 19:27:56 LOG5 begin_task: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-20 19:27:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:27:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-20 19:27:56 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-20 19:27:56 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2009-Apr-20 19:27:56 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-20 19:27:56 INFO1 WAPP=1+2+4-adjust_power: DONE adjusting power 2009-Apr-20 19:28:06 ERROR end_wait_seconds: ERROR timed out while waiting for adjust WAPP power! 2009-Apr-20 19:28:06 LOG1 task_failed: Task 'waiting on adjust WAPP power' failed! 2009-Apr-20 19:28:06 LOG5 task_failed: Level: (4) ID = <10125> Status = 0 0 0 0 ok 2009-Apr-20 19:28:06 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'FAILED' 2009-Apr-20 19:28:06 LOG5 end_task: Level: (4) ID = <10125> Status = 0 0 0 1 failed 2009-Apr-20 19:28:06 START begin_task: Starting task 'stopping the WAPPs' 2009-Apr-20 19:28:06 LOG5 begin_task: Level: (4) ID = <10126> Status = 0 0 0 1 failed 2009-Apr-20 19:28:06 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2009-Apr-20 19:28:06 INFO1 stop_wapp: Stopping the WAPPs 2009-Apr-20 19:28:06 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2009-Apr-20 19:28:06 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2009-Apr-20 19:28:06 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2009-Apr-20 19:28:06 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2009-Apr-20 19:28:06 START begin_task: Starting task 'waiting on stopping WAPPs' 2009-Apr-20 19:28:06 LOG5 begin_task: Level: (5) ID = <10127> Status = 0 0 0 1 failed 2009-Apr-20 19:28:06 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2009-Apr-20 19:28:06 INFO1 WAPP=1+2+4-wappcon: Can't abort --- the WAPP isn't running 2009-Apr-20 19:28:11 ERROR end_wait_seconds: ERROR timed out while waiting for stopping WAPPs! 2009-Apr-20 19:28:11 LOG1 task_failed: Task 'waiting on stopping WAPPs' failed! 2009-Apr-20 19:28:11 LOG5 task_failed: Level: (5) ID = <10127> Status = 0 0 0 1 failed 2009-Apr-20 19:28:11 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'FAILED' 2009-Apr-20 19:28:11 LOG5 end_task: Level: (5) ID = <10127> Status = 0 0 0 1 failed 2009-Apr-20 19:28:11 STOP end_task: Finishing task 'stopping the WAPPs' with status 'FAILED' 2009-Apr-20 19:28:11 LOG5 end_task: Level: (4) ID = <10126> Status = 0 0 0 1 failed 2009-Apr-20 19:28:11 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:28:11 LOG5 finish_task: Level: (3) ID = <10124> Status = 0 0 0 1 failed 2009-Apr-20 19:28:11 ERROR finish_task: ERROR failed adjusting: WAPP power 2009-Apr-20 19:28:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2009-Apr-20 19:28:11 STOP end_task: Finishing task 'adjusting WAPP power' with status 'FAILED' 2009-Apr-20 19:28:11 LOG5 end_task: Level: (3) ID = <10124> Status = 0 0 0 1 failed 2009-Apr-20 19:28:11 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-20 19:28:11 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:28:11 LOG5 finish_task: Level: (2) ID = <10122> Status = 0 0 0 1 failed 2009-Apr-20 19:28:11 ERROR finish_task: ERROR failed adjusting: WAPP power levels 2009-Apr-20 19:28:11 LOG4 send_obs_status: To obs_status: <0> ENDTASK Failed 2009-Apr-20 19:28:11 STOP end_task: Finishing task 'adjusting WAPP power' with status 'FAILED' 2009-Apr-20 19:28:11 LOG5 end_task: Level: (2) ID = <10122> Status = 0 0 0 1 failed 2009-Apr-20 19:28:11 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Apr-20 19:28:11 LOG5 finish_task: Level: (1) ID = <10111> Status = 0 0 0 1 failed 2009-Apr-20 19:28:11 ERROR finish_task: ERROR failed pattern: fixed azimuth drift map 2009-Apr-20 19:28:11 LOG4 send_obs_status: To obs_status: <1> ENDTASK Failed 2009-Apr-20 19:28:11 END end_task: Finishing task 'fixed azimuth drift map' with status 'FAILED' 2009-Apr-20 19:28:11 LOG5 end_task: Level: (1) ID = <10111> Status = 0 0 0 1 failed 2009-Apr-20 19:28:11 ERROR WAPP=3-wappcon: ERROR the WAPP never aborted! 2009-Apr-20 19:28:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:28:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.014 0.901 1.057 1.080 2009-Apr-20 19:28:12 LOG4 check_wapp_levels: WAPP-2 power levels: 0.996 0.952 1.079 0.897 2009-Apr-20 19:28:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.916 1.035 0.967 2009-Apr-20 19:28:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.922 0.105 1.016 0.130 2009-Apr-20 19:28:27 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-20 19:28:27 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-20 19:28:27 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-20 19:28:27 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-20 19:28:27 LOG5 begin_task: Level: (1) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-20 19:28:27 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-20 19:28:28 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-20 19:28:28 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-20 19:28:28 LOG5 end_task: Level: (1) ID = <10128> Status = 0 0 0 0 ok 2009-Apr-20 19:28:28 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-20 19:28:28 LOG3 exec_msg: Closing socket 2009-Apr-20 19:28:28 LOG3 exec_msg: Closing socket 2009-Apr-20 19:28:28 LOG3 exec_msg: Closing socket 2009-Apr-20 19:28:28 LOG3 exec_msg: Closing socket 2009-Apr-20 19:28:30 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-20 19:28:30 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-20 19:28:30 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-20 19:28:30 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-20 19:28:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-20 19:28:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-20 19:28:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-20 19:28:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-20 19:28:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-20 19:28:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-20 19:28:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-20 19:28:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-20 19:28:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-20 19:28:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-20 19:28:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-20 19:28:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-20 19:28:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-20 19:28:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-20 19:28:40 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-20 19:28:40 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-20 19:28:40 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-20 19:28:40 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-20 19:28:40 LOG5 begin_task: Level: (1) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-20 19:28:40 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-20 19:28:40 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-20 19:28:40 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-20 19:28:40 START begin_task: Starting task 'selecting calibration port' 2009-Apr-20 19:28:40 LOG5 begin_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-20 19:28:40 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-20 19:28:40 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-20 19:28:40 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:28:40 START begin_task: Starting task 'waiting on calport' 2009-Apr-20 19:28:40 LOG5 begin_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-20 19:28:40 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-20 19:28:40 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:28:40 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:28:40 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:28:40 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-20 19:28:40 LOG5 end_task: Level: (3) ID = <10131> Status = 0 0 0 0 ok 2009-Apr-20 19:28:40 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-20 19:28:40 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-20 19:28:40 LOG5 end_task: Level: (2) ID = <10130> Status = 0 0 0 0 ok 2009-Apr-20 19:28:41 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-20 19:28:41 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-20 19:28:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-20 19:28:41 LOG5 begin_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-20 19:28:41 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:28:41 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-20 19:28:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-20 19:28:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-20 19:28:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-20 19:28:41 LOG5 end_task: Level: (2) ID = <10132> Status = 0 0 0 0 ok 2009-Apr-20 19:28:41 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-20 19:28:41 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-20 19:28:41 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-20 19:28:41 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-20 19:28:41 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-20 19:28:41 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-20 19:28:41 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-20 19:28:41 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-20 19:28:41 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-20 19:28:41 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-20 19:28:41 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-20 19:28:41 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-20 19:28:41 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-20 19:28:41 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-20 19:28:41 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-20 19:28:41 LOG5 begin_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-20 19:28:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-20 19:28:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-20 19:28:41 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-20 19:28:41 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-20 19:28:41 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-20 19:28:41 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-20 19:28:41 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-20 19:28:41 LOG5 end_task: Level: (2) ID = <10133> Status = 0 0 0 0 ok 2009-Apr-20 19:28:41 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-20 19:28:41 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-20 19:28:41 LOG5 finish_task: Level: (1) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-20 19:28:41 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-20 19:28:41 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:28:41 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-20 19:28:41 LOG5 end_task: Level: (1) ID = <10129> Status = 0 0 0 0 ok 2009-Apr-20 19:28:41 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-20 19:28:57 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-20 19:28:57 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-20 19:28:58 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:28:58 LOG5 begin_task: Level: (1) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-20 19:28:58 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-20 19:28:58 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-20 19:28:59 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-20 19:28:59 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-20 19:28:59 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:28:59 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-20 19:28:59 LOG5 begin_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-20 19:29:00 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-20 19:29:00 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:29:02 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:29:02 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:29:02 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-20 19:29:02 LOG5 end_task: Level: (2) ID = <10135> Status = 0 0 0 0 ok 2009-Apr-20 19:29:02 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-20 19:29:02 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:29:02 LOG5 begin_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-20 19:29:03 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-20 19:29:03 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:29:03 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:29:03 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:29:03 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:29:03 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-20 19:29:03 LOG5 begin_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-20 19:29:03 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-20 19:29:03 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:29:03 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-20 19:29:03 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2009-Apr-20 19:29:03 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 3 dB 2009-Apr-20 19:29:03 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-20 19:29:03 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-20 19:29:03 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-20 19:29:03 LOG5 end_task: Level: (3) ID = <10137> Status = 0 0 0 0 ok 2009-Apr-20 19:29:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.012 0.904 ALFA beam 1: 1.058 1.080 2009-Apr-20 19:29:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.008 0.958 ALFA beam 3: 1.063 0.886 2009-Apr-20 19:29:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.078 0.921 ALFA beam 5: 1.049 0.980 2009-Apr-20 19:29:03 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.888 0.103 ALFA beam 7: 0.985 0.127 2009-Apr-20 19:29:03 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:29:03 LOG5 finish_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-20 19:29:03 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-20 19:29:03 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:29:03 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-20 19:29:03 LOG5 end_task: Level: (2) ID = <10136> Status = 0 0 0 0 ok 2009-Apr-20 19:29:03 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-20 19:29:03 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:29:03 LOG5 finish_task: Level: (1) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-20 19:29:03 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-20 19:29:03 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:29:03 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-20 19:29:03 LOG5 end_task: Level: (1) ID = <10134> Status = 0 0 0 0 ok 2009-Apr-20 19:29:05 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2009-Apr-20 19:29:05 LOG4 exec_msg: From OBSERVER: new_file manual 2009-Apr-20 19:29:05 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-20 19:29:05 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-20 19:29:05 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-20 19:29:05 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-20 19:29:05 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.103 < 0.75)! 2009-Apr-20 19:29:05 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 0.904 1.058 1.080 2009-Apr-20 19:29:05 LOG4 check_wapp_levels: WAPP-2 power levels: 1.008 0.958 1.063 0.886 2009-Apr-20 19:29:05 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.921 1.049 0.980 2009-Apr-20 19:29:05 LOG4 check_wapp_levels: WAPP-4 power levels: 0.888 0.103 0.985 0.127 2009-Apr-20 19:29:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-20 19:29:06 NOTE WAPPDATA-new_file: New FITS file: wapp.20090420.a2010.0015.fits 2009-Apr-20 19:29:06 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090420.a2010.0015.fits} 2009-Apr-20 19:29:08 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-20 19:29:08 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift88p1 085800.0 +211730 J 0 Topocentric velocity(optical) 2009-Apr-20 19:29:08 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift88p1 085800.0 +211730 J 0 Topocentric velocity(optical)' 2009-Apr-20 19:29:08 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-20 19:29:08 LOG5 begin_task: Level: (1) ID = <10138> Status = 0 0 0 0 ok 2009-Apr-20 19:29:08 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift88p1' 2009-Apr-20 19:29:08 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-20 19:29:08 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift88p1} 2009-Apr-20 19:29:08 INFO5 fixed_driftmap: Start: year = 2009.3033864425686 RA = 08:58:33.3 Dec = +21:15:19.9 2009-Apr-20 19:29:08 NOTE fixed_driftmap: Setting ZA to 2:54:06.2 ... 2009-Apr-20 19:29:08 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 2.90 2009-Apr-20 19:29:08 LOG3 track_source: Calling 'track_source drift88p1 180.0 2.9017222643 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-20 19:29:08 START begin_task: Starting task 'sending tracking commands' 2009-Apr-20 19:29:08 LOG5 begin_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-20 19:29:08 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift88p1} INFO {Slewing to source 'drift88p1' ...} 2009-Apr-20 19:29:08 INFO1 track_source: Starting to track drift88p1 2009-Apr-20 19:29:08 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift88p1" 2009-Apr-20 19:29:08 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-20 19:29:08 LOG3 vw_send: To DATATAKING: set dec 2.9017222643 2009-Apr-20 19:29:08 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-20 19:29:08 LOG3 vw_send: To DATATAKING: pnt tr 180.0 2.9017222643 -CF 2009-Apr-20 19:29:08 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-20 19:29:08 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-20 19:29:08 LOG5 finish_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-20 19:29:08 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-20 19:29:08 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:29:08 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-20 19:29:08 LOG5 end_task: Level: (2) ID = <10139> Status = 0 0 0 0 ok 2009-Apr-20 19:29:09 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-20 19:29:09 LOG5 begin_task: Level: (2) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-20 19:29:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-20 19:29:09 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-20 19:29:09 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-20 19:29:09 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-20 19:29:09 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-20 19:29:09 LOG5 begin_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-20 19:29:09 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift88p1" 2009-Apr-20 19:29:09 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-20 19:29:09 LOG4 got_cormsg: From DATATAKING: set dec 2.9017222643 2009-Apr-20 19:29:09 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-20 19:29:09 LOG4 got_cormsg: From DATATAKING: 2009-Apr-20 19:29:09 LOG4 got_cormsg: From DATATAKING: vw% 2.9017222643 2009-Apr-20 19:29:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:29:09 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-20 19:29:09 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 2.9017222643 -CF 2009-Apr-20 19:29:09 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-20 19:29:09 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-20 19:29:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:29:09 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-20 19:29:09 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-20 19:29:10 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-20 19:29:10 LOG5 end_task: Level: (3) ID = <10141> Status = 0 0 0 0 ok 2009-Apr-20 19:29:10 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-20 19:29:10 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-20 19:29:10 LOG5 finish_task: Level: (2) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-20 19:29:10 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-20 19:29:10 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:29:10 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-20 19:29:10 LOG5 end_task: Level: (2) ID = <10140> Status = 0 0 0 0 ok 2009-Apr-20 19:29:10 START begin_task: Starting task 'waiting on telescope' 2009-Apr-20 19:29:10 LOG5 begin_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-20 19:29:10 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-20 19:29:10 LOG3 waittrk: Start waittrk 5 2009-Apr-20 19:29:10 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-20 19:29:10 LOG5 begin_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-20 19:29:15 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-20 19:29:15 LOG5 end_task: Level: (3) ID = <10143> Status = 0 0 0 0 ok 2009-Apr-20 19:29:15 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-20 19:29:15 LOG5 begin_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-20 19:29:16 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-20 19:29:16 LOG5 end_task: Level: (3) ID = <10144> Status = 0 0 0 0 ok 2009-Apr-20 19:29:16 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-20 19:29:16 INFO2 waittrk: Now tracking drift88p1 2009-Apr-20 19:29:16 LOG4 waittrk: Current telescope position: Az = 179.75 ZA = 2.92 2009-Apr-20 19:29:16 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-20 19:29:16 LOG5 finish_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-20 19:29:16 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-20 19:29:16 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:29:16 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-20 19:29:16 LOG5 end_task: Level: (2) ID = <10142> Status = 0 0 0 0 ok 2009-Apr-20 19:29:16 START begin_task: Starting task 'selecting calibration type' 2009-Apr-20 19:29:16 LOG5 begin_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-20 19:29:16 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-20 19:29:16 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-20 19:29:16 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:29:16 START begin_task: Starting task 'waiting on setcal' 2009-Apr-20 19:29:16 LOG5 begin_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-20 19:29:16 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-20 19:29:16 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:29:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:29:16 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:29:16 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-20 19:29:16 LOG5 end_task: Level: (3) ID = <10146> Status = 0 0 0 0 ok 2009-Apr-20 19:29:16 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-20 19:29:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-20 19:29:16 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-20 19:29:16 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-20 19:29:16 LOG5 begin_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-20 19:29:16 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:29:16 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-20 19:29:16 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-20 19:29:16 LOG5 end_task: Level: (3) ID = <10147> Status = 0 0 0 0 ok 2009-Apr-20 19:29:16 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-20 19:29:16 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-20 19:29:16 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-20 19:29:16 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:29:16 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-20 19:29:16 LOG5 begin_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-20 19:29:17 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-20 19:29:17 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-20 19:29:17 LOG5 end_task: Level: (3) ID = <10148> Status = 0 0 0 0 ok 2009-Apr-20 19:29:17 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-20 19:29:17 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:29:17 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-20 19:29:17 LOG5 end_task: Level: (2) ID = <10145> Status = 0 0 0 0 ok 2009-Apr-20 19:29:17 LOG5 dopset_later: Calling 'dopset_later 0' 2009-Apr-20 19:29:17 INFO3 dopset_later: Setting Doppler correction now 2009-Apr-20 19:29:17 LOG5 antvel: Calling 'antvel 180.000000 2.901722 F Topocentric 0' 2009-Apr-20 19:29:17 LOG2 antvel: Transforming current Az = 180.00 ZA = 2.90 to apparent RA = 08:58:57.9 Dec = +21:15:19.9 2009-Apr-20 19:29:17 LOG2 antvel: Parameters to Doppler: Topocentric 84556 2009 110 0.0 2009-Apr-20 19:29:17 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:29:17 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-20 19:29:17 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-20 19:29:17 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:29:17 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:29:17 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-20 19:29:17 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:29:17 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:29:17 LOG5 begin_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-20 19:29:17 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-20 19:29:17 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-20 19:29:17 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-20 19:29:17 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-20 19:29:17 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:29:17 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-20 19:29:17 LOG5 begin_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-20 19:29:17 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-20 19:29:17 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:29:17 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-20 19:29:17 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:29:17 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-20 19:29:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:29:20 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:29:20 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-20 19:29:20 LOG5 end_task: Level: (3) ID = <10150> Status = 0 0 0 0 ok 2009-Apr-20 19:29:20 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-20 19:29:20 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:29:20 LOG5 begin_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-20 19:29:20 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-20 19:29:20 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:29:20 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:29:20 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:29:20 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:29:20 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-20 19:29:20 LOG5 begin_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-20 19:29:20 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-20 19:29:20 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:29:20 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-20 19:29:20 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 3 dB 2009-Apr-20 19:29:20 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2009-Apr-20 19:29:20 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-20 19:29:20 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-20 19:29:20 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-20 19:29:20 LOG5 end_task: Level: (4) ID = <10152> Status = 0 0 0 0 ok 2009-Apr-20 19:29:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.011 0.901 ALFA beam 1: 1.057 1.079 2009-Apr-20 19:29:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.004 0.955 ALFA beam 3: 1.078 0.901 2009-Apr-20 19:29:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.091 0.938 ALFA beam 5: 1.039 0.984 2009-Apr-20 19:29:21 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.900 0.105 ALFA beam 7: 0.991 0.130 2009-Apr-20 19:29:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:29:21 LOG5 finish_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-20 19:29:21 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-20 19:29:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:29:21 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-20 19:29:21 LOG5 end_task: Level: (3) ID = <10151> Status = 0 0 0 0 ok 2009-Apr-20 19:29:21 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-20 19:29:21 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:29:21 LOG5 finish_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-20 19:29:21 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-20 19:29:21 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:29:21 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-20 19:29:21 LOG5 end_task: Level: (2) ID = <10149> Status = 0 0 0 0 ok 2009-Apr-20 19:29:21 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 08:58:33.3 LST = 08:59:01.9 diff = -28.6 secs 2009-Apr-20 19:29:21 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2009-Apr-20 19:29:21 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-20 19:29:21 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-20 19:29:21 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-20 19:29:21 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-20 19:29:21 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090420.a2010.0015.fits' is empty! 2009-Apr-20 19:29:21 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Apr-20 19:29:21 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-20 19:29:21 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-20 19:29:21 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-20 19:29:21 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-20 19:29:21 LOG5 begin_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-20 19:29:21 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-20 19:29:21 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-20 19:29:21 INFO2 take_data: Starting WAPP 600-second scan: 911000220 2009-Apr-20 19:29:21 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-20 19:29:21 LOG5 begin_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-20 19:29:21 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-20 19:29:21 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:29:21 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-20 19:29:21 INFO1 WAPP=1+2+3+4-start_spectra: start sec 84562.00 2009-Apr-20 19:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:29:23 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:29:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.091 (still bad) 2009-Apr-20 19:29:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:29:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:29:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:29:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:29:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:29:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:29:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:29:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:29:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:29:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:29:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:29:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:29:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:29:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:29:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:29:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:29:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:30:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:30:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:30:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:30:06 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:30:06 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 0.900 1.055 1.081 2009-Apr-20 19:30:06 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.955 1.081 0.902 2009-Apr-20 19:30:06 LOG4 check_wapp_levels: WAPP-3 power levels: 1.095 0.940 1.037 0.985 2009-Apr-20 19:30:06 LOG4 check_wapp_levels: WAPP-4 power levels: 0.902 0.105 0.994 0.130 2009-Apr-20 19:30:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:30:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:30:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:30:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:30:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:30:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:30:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:30:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:30:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:30:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.091 (still bad) 2009-Apr-20 19:30:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:30:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:30:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:30:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:30:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:30:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:30:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-20 19:30:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:30:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:30:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:30:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:30:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.091 (still bad) 2009-Apr-20 19:30:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:30:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:30:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:30:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:31:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:31:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:31:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:31:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:31:08 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:31:08 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 0.900 1.056 1.077 2009-Apr-20 19:31:08 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.956 1.079 0.899 2009-Apr-20 19:31:08 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.936 1.037 0.985 2009-Apr-20 19:31:08 LOG4 check_wapp_levels: WAPP-4 power levels: 0.899 0.105 0.992 0.130 2009-Apr-20 19:31:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:31:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.091 (still bad) 2009-Apr-20 19:31:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:31:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.099 (still bad) 2009-Apr-20 19:31:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:31:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:31:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:31:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:31:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:31:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.099 (still bad) 2009-Apr-20 19:31:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:31:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:31:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:31:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:31:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:31:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:31:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:31:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:31:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:31:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:31:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:31:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-20 19:31:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:31:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:31:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:32:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:32:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:32:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.100 (still bad) 2009-Apr-20 19:32:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:32:09 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:32:09 LOG4 check_wapp_levels: WAPP-1 power levels: 1.014 0.900 1.077 1.101 2009-Apr-20 19:32:09 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.955 1.082 0.901 2009-Apr-20 19:32:09 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.938 1.036 0.982 2009-Apr-20 19:32:09 LOG4 check_wapp_levels: WAPP-4 power levels: 0.901 0.105 0.991 0.130 2009-Apr-20 19:32:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-20 19:32:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-20 19:32:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-20 19:32:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-20 19:32:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:32:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:32:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:32:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:32:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:32:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.099 (still bad) 2009-Apr-20 19:32:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:32:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:32:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:32:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:32:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:32:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-20 19:32:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:32:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:32:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:32:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:32:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-20 19:32:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:32:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:32:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-20 19:33:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:33:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:33:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:33:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:33:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:33:10 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:33:10 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 0.901 1.057 1.080 2009-Apr-20 19:33:10 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.958 1.081 0.899 2009-Apr-20 19:33:10 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.938 1.039 0.986 2009-Apr-20 19:33:10 LOG4 check_wapp_levels: WAPP-4 power levels: 0.902 0.105 0.994 0.130 2009-Apr-20 19:33:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:33:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:33:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:33:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:33:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:33:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:33:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:33:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.090 (still bad) 2009-Apr-20 19:33:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:33:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:33:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.091 (still bad) 2009-Apr-20 19:33:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:33:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:33:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:33:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:33:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:33:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:33:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:33:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:33:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:33:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:33:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:33:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:33:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:34:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:34:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:34:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:34:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:34:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:34:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:34:12 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:34:12 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 0.899 1.058 1.080 2009-Apr-20 19:34:12 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.957 1.080 0.898 2009-Apr-20 19:34:12 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.936 1.036 0.984 2009-Apr-20 19:34:12 LOG4 check_wapp_levels: WAPP-4 power levels: 0.899 0.105 0.992 0.130 2009-Apr-20 19:34:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:34:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:34:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:34:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:34:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:34:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:34:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:34:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-20 19:34:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:34:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:34:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:34:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:34:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:34:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-20 19:34:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:34:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:34:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:34:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:34:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:34:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:34:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:34:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:34:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:35:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:35:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:35:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-20 19:35:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:35:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:35:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:35:13 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:35:13 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 0.899 1.055 1.078 2009-Apr-20 19:35:13 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.955 1.082 0.898 2009-Apr-20 19:35:13 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.940 1.037 0.985 2009-Apr-20 19:35:13 LOG4 check_wapp_levels: WAPP-4 power levels: 0.908 0.105 1.000 0.130 2009-Apr-20 19:35:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:35:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-20 19:35:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:35:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:35:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:35:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:35:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:35:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.100 (still bad) 2009-Apr-20 19:35:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:35:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:35:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:35:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:35:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:35:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-20 19:35:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:35:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:35:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:35:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:35:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:35:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.100 (still bad) 2009-Apr-20 19:35:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:35:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:36:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:36:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:36:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-20 19:36:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-20 19:36:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-20 19:36:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-20 19:36:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-20 19:36:14 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:36:14 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 0.900 1.058 1.080 2009-Apr-20 19:36:14 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.956 1.081 0.897 2009-Apr-20 19:36:14 LOG4 check_wapp_levels: WAPP-3 power levels: 1.105 0.949 1.034 0.984 2009-Apr-20 19:36:14 LOG4 check_wapp_levels: WAPP-4 power levels: 0.899 0.105 0.991 0.130 2009-Apr-20 19:36:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-20 19:36:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-20 19:36:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-20 19:36:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-20 19:36:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.103 (still bad) 2009-Apr-20 19:36:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-20 19:36:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.104 (still bad) 2009-Apr-20 19:36:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-20 19:36:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-20 19:36:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-20 19:36:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-20 19:36:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-20 19:36:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-20 19:36:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-20 19:36:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:36:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:36:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:36:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:36:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:36:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:36:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:36:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:37:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:37:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:37:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:37:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:37:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:37:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:37:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:37:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:37:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 0.902 1.054 1.081 2009-Apr-20 19:37:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.957 1.080 0.898 2009-Apr-20 19:37:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.093 0.939 1.039 0.984 2009-Apr-20 19:37:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.900 0.105 0.991 0.130 2009-Apr-20 19:37:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:37:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:37:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:37:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:37:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:37:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:37:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:37:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:37:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:37:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:37:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:37:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:37:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:37:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:37:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:37:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-20 19:37:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:37:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:37:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.102 (still bad) 2009-Apr-20 19:37:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:37:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:37:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:38:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:38:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:38:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-20 19:38:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:38:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:38:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-20 19:38:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:38:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:38:17 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:38:17 LOG4 check_wapp_levels: WAPP-1 power levels: 1.016 0.907 1.062 1.089 2009-Apr-20 19:38:17 LOG4 check_wapp_levels: WAPP-2 power levels: 1.007 0.963 1.086 0.905 2009-Apr-20 19:38:17 LOG4 check_wapp_levels: WAPP-3 power levels: 1.101 0.948 1.045 0.991 2009-Apr-20 19:38:17 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.105 0.998 0.130 2009-Apr-20 19:38:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:38:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:38:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:38:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:38:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:38:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-20 19:38:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:38:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.091 (still bad) 2009-Apr-20 19:38:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:38:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:38:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:38:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:38:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:38:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.091 (still bad) 2009-Apr-20 19:38:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:38:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:38:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:38:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-20 19:38:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:38:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:39:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:39:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:39:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.090 (still bad) 2009-Apr-20 19:39:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:39:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:39:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:39:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:39:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:39:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:39:18 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:39:18 LOG4 check_wapp_levels: WAPP-1 power levels: 1.015 0.908 1.059 1.086 2009-Apr-20 19:39:18 LOG4 check_wapp_levels: WAPP-2 power levels: 1.008 0.962 1.083 0.902 2009-Apr-20 19:39:18 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.941 1.043 0.988 2009-Apr-20 19:39:18 LOG4 check_wapp_levels: WAPP-4 power levels: 0.904 0.105 0.994 0.130 2009-Apr-20 19:39:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:39:22 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:39:22 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-20 19:39:22 LOG5 end_task: Level: (3) ID = <10154> Status = 0 0 0 0 ok 2009-Apr-20 19:39:22 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-20 19:39:22 LOG5 end_task: Level: (2) ID = <10153> Status = 0 0 0 0 ok 2009-Apr-20 19:39:22 LOG1 fixed_driftmap: New position: year = 2009.3034058990545 RA = 09:08:33.2 RA/Dec = 09:09:06.4 +21:15:13.5 2009-Apr-20 19:39:22 NOTE fixed_driftmap: Correcting ZA to 2:53:59.8 ... 2009-Apr-20 19:39:22 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.8999444716 -CF 2009-Apr-20 19:39:23 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-20 19:39:23 START begin_task: Starting task 'WAPP calibration' 2009-Apr-20 19:39:23 LOG5 begin_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-20 19:39:23 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-20 19:39:23 START begin_task: Starting task 'selecting calibration type' 2009-Apr-20 19:39:23 LOG5 begin_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-20 19:39:23 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-20 19:39:23 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-20 19:39:23 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:39:23 START begin_task: Starting task 'waiting on setcal' 2009-Apr-20 19:39:23 LOG5 begin_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-20 19:39:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:39:23 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.8999444716 -CF 2009-Apr-20 19:39:23 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-20 19:39:23 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:39:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:39:23 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:39:23 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:39:23 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-20 19:39:23 LOG5 end_task: Level: (4) ID = <10157> Status = 0 0 0 0 ok 2009-Apr-20 19:39:24 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-20 19:39:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-20 19:39:24 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-20 19:39:24 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-20 19:39:24 LOG5 begin_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-20 19:39:24 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:39:24 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-20 19:39:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-20 19:39:24 LOG5 end_task: Level: (4) ID = <10158> Status = 0 0 0 0 ok 2009-Apr-20 19:39:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-20 19:39:24 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-20 19:39:24 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-20 19:39:24 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:39:24 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-20 19:39:24 LOG5 begin_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-20 19:39:24 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-20 19:39:24 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-20 19:39:24 LOG5 end_task: Level: (4) ID = <10159> Status = 0 0 0 0 ok 2009-Apr-20 19:39:24 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-20 19:39:24 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:39:24 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-20 19:39:24 LOG5 end_task: Level: (3) ID = <10156> Status = 0 0 0 0 ok 2009-Apr-20 19:39:24 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-20 19:39:24 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-20 19:39:24 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-20 19:39:24 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-20 19:39:24 LOG5 begin_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-20 19:39:24 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-20 19:39:24 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-20 19:39:24 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-20 19:39:24 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-20 19:39:24 LOG5 end_task: Level: (3) ID = <10160> Status = 0 0 0 0 ok 2009-Apr-20 19:39:24 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-20 19:39:24 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-20 19:39:24 LOG5 begin_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-20 19:39:24 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-20 19:39:24 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-20 19:39:25 INFO2 take_data: Starting WAPP 1-second scan: 911000221 2009-Apr-20 19:39:25 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-20 19:39:25 LOG5 begin_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-20 19:39:25 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:39:25 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-20 19:39:25 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85166.00 2009-Apr-20 19:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:39:27 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:39:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.541 (still bad) 2009-Apr-20 19:39:27 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:39:27 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-20 19:39:27 LOG5 end_task: Level: (4) ID = <10162> Status = 0 0 0 0 ok 2009-Apr-20 19:39:27 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-20 19:39:27 LOG5 end_task: Level: (3) ID = <10161> Status = 0 0 0 0 ok 2009-Apr-20 19:39:27 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-20 19:39:27 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-20 19:39:27 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-20 19:39:27 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-20 19:39:27 LOG5 begin_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-20 19:39:28 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-20 19:39:28 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-20 19:39:28 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-20 19:39:28 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-20 19:39:28 LOG5 end_task: Level: (3) ID = <10163> Status = 0 0 0 0 ok 2009-Apr-20 19:39:28 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-20 19:39:28 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-20 19:39:28 LOG5 finish_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-20 19:39:28 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-20 19:39:28 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:39:28 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-20 19:39:28 LOG5 end_task: Level: (2) ID = <10155> Status = 0 0 0 0 ok 2009-Apr-20 19:39:28 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Apr-20 19:39:28 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-20 19:39:28 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-20 19:39:28 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-20 19:39:28 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-20 19:39:28 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-20 19:39:28 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-20 19:39:28 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-20 19:39:28 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-20 19:39:28 LOG5 begin_task: Level: (2) ID = <10164> Status = 0 0 0 0 ok 2009-Apr-20 19:39:28 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-20 19:39:28 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-20 19:39:28 INFO2 take_data: Starting WAPP 600-second scan: 911000222 2009-Apr-20 19:39:28 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-20 19:39:28 LOG5 begin_task: Level: (3) ID = <10165> Status = 0 0 0 0 ok 2009-Apr-20 19:39:28 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-20 19:39:28 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:39:28 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-20 19:39:28 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85169.00 2009-Apr-20 19:39:29 NOTE WAPPDATA-new_file: New FITS file: wapp.20090420.a2010.0016.fits 2009-Apr-20 19:39:29 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090420.a2010.0016.fits} 2009-Apr-20 19:39:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.541 (still bad) 2009-Apr-20 19:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:39:30 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:39:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:39:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:39:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:39:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.091 (still bad) 2009-Apr-20 19:39:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:39:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:39:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:39:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:39:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:39:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:39:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:39:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:39:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:39:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:39:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:40:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:40:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:40:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:40:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:40:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:40:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:40:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:40:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:40:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:40:20 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:40:20 LOG4 check_wapp_levels: WAPP-1 power levels: 1.010 0.905 1.057 1.083 2009-Apr-20 19:40:20 LOG4 check_wapp_levels: WAPP-2 power levels: 1.006 0.960 1.082 0.901 2009-Apr-20 19:40:20 LOG4 check_wapp_levels: WAPP-3 power levels: 1.097 0.941 1.041 0.991 2009-Apr-20 19:40:20 LOG4 check_wapp_levels: WAPP-4 power levels: 0.902 0.105 0.994 0.130 2009-Apr-20 19:40:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:40:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:40:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:40:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:40:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:40:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:40:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:40:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:40:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:40:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:40:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:40:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:40:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:40:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:40:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:40:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:40:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:40:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:40:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:41:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:41:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:41:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:41:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:41:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:41:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:41:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:41:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:41:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:41:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:41:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:41:22 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:41:22 LOG4 check_wapp_levels: WAPP-1 power levels: 1.019 0.911 1.057 1.083 2009-Apr-20 19:41:22 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.960 1.079 0.899 2009-Apr-20 19:41:22 LOG4 check_wapp_levels: WAPP-3 power levels: 1.091 0.942 1.038 0.986 2009-Apr-20 19:41:22 LOG4 check_wapp_levels: WAPP-4 power levels: 0.899 0.105 0.992 0.130 2009-Apr-20 19:41:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:41:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:41:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:41:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-20 19:41:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:41:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:41:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:41:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:41:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:41:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:41:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:41:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:41:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:41:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:41:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:41:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.100 (still bad) 2009-Apr-20 19:41:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:41:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:42:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:42:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:42:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:42:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-20 19:42:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:42:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:42:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:42:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:42:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:42:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-20 19:42:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:42:23 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:42:23 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 0.902 1.055 1.083 2009-Apr-20 19:42:23 LOG4 check_wapp_levels: WAPP-2 power levels: 1.002 0.959 1.089 0.908 2009-Apr-20 19:42:23 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.941 1.035 0.985 2009-Apr-20 19:42:23 LOG4 check_wapp_levels: WAPP-4 power levels: 0.900 0.105 0.991 0.130 2009-Apr-20 19:42:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:42:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:42:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:42:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-20 19:42:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.108 (still bad) 2009-Apr-20 19:42:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.119 (still bad) 2009-Apr-20 19:42:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.133 (still bad) 2009-Apr-20 19:42:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.133 (still bad) 2009-Apr-20 19:42:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.132 (still bad) 2009-Apr-20 19:42:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.131 (still bad) 2009-Apr-20 19:42:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.113 (still bad) 2009-Apr-20 19:42:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.102 (still bad) 2009-Apr-20 19:42:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-20 19:42:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.112 (still bad) 2009-Apr-20 19:42:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.124 (still bad) 2009-Apr-20 19:42:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.138 (still bad) 2009-Apr-20 19:42:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.146 (still bad) 2009-Apr-20 19:42:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.154 (still bad) 2009-Apr-20 19:43:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.155 (still bad) 2009-Apr-20 19:43:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.147 (still bad) 2009-Apr-20 19:43:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.138 (still bad) 2009-Apr-20 19:43:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.124 (still bad) 2009-Apr-20 19:43:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.115 (still bad) 2009-Apr-20 19:43:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-20 19:43:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.107 (still bad) 2009-Apr-20 19:43:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.109 (still bad) 2009-Apr-20 19:43:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.111 (still bad) 2009-Apr-20 19:43:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.116 (still bad) 2009-Apr-20 19:43:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.117 (still bad) 2009-Apr-20 19:43:24 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:43:24 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 0.904 1.056 1.084 2009-Apr-20 19:43:24 LOG4 check_wapp_levels: WAPP-2 power levels: 1.007 0.962 1.083 0.903 2009-Apr-20 19:43:24 LOG4 check_wapp_levels: WAPP-3 power levels: 1.116 0.960 1.040 0.990 2009-Apr-20 19:43:24 LOG4 check_wapp_levels: WAPP-4 power levels: 0.899 0.105 0.990 0.130 2009-Apr-20 19:43:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.110 (still bad) 2009-Apr-20 19:43:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.105 (still bad) 2009-Apr-20 19:43:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.101 (still bad) 2009-Apr-20 19:43:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-20 19:43:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:43:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:43:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:43:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:43:42 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:43:44 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:43:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:43:48 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:43:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:43:52 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:43:54 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:43:56 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:43:58 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:44:00 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:44:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:44:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:44:06 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:44:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:44:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:44:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:44:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:44:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:44:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:44:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:44:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:44:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:44:27 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:44:27 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 0.901 1.054 1.081 2009-Apr-20 19:44:27 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.961 1.079 0.901 2009-Apr-20 19:44:27 LOG4 check_wapp_levels: WAPP-3 power levels: 1.094 0.943 1.042 0.987 2009-Apr-20 19:44:27 LOG4 check_wapp_levels: WAPP-4 power levels: 0.897 0.105 0.990 0.130 2009-Apr-20 19:44:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:44:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:44:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.093 (still bad) 2009-Apr-20 19:44:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:44:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.096 (still bad) 2009-Apr-20 19:44:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:44:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:44:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.100 (still bad) 2009-Apr-20 19:44:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:44:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:44:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:44:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:44:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:44:55 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-20 19:44:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:44:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:45:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:45:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:45:05 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:45:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.100 (still bad) 2009-Apr-20 19:45:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:45:11 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:45:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:45:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:45:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-20 19:45:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.100 (still bad) 2009-Apr-20 19:45:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:45:23 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:45:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-20 19:45:27 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:45:29 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:45:29 LOG4 check_wapp_levels: WAPP-1 power levels: 1.008 0.903 1.057 1.085 2009-Apr-20 19:45:29 LOG4 check_wapp_levels: WAPP-2 power levels: 1.008 0.965 1.081 0.902 2009-Apr-20 19:45:29 LOG4 check_wapp_levels: WAPP-3 power levels: 1.096 0.941 1.041 0.987 2009-Apr-20 19:45:29 LOG4 check_wapp_levels: WAPP-4 power levels: 0.898 0.105 0.990 0.129 2009-Apr-20 19:45:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.099 (still bad) 2009-Apr-20 19:45:33 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:45:35 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:45:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-20 19:45:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:45:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:45:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-20 19:45:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:45:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:45:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:45:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 19:45:53 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:45:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.100 (still bad) 2009-Apr-20 19:45:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-20 19:45:59 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:46:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.098 (still bad) 2009-Apr-20 19:46:04 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:46:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.097 (still bad) 2009-Apr-20 19:46:08 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:46:10 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.094 (still bad) 2009-Apr-20 19:46:12 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:46:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:46:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.095 (still bad) 2009-Apr-20 19:46:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:46:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.097 (still bad) 2009-Apr-20 19:46:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-20 19:46:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.096 (still bad) 2009-Apr-20 19:46:26 WARNING WAPP=1+2+3+4-start_spectra: WARNING observing when not on source 2009-Apr-20 19:46:26 INFO5 check_wapp_levels: WAPP power levels are between 0.051 and 0.129 (still bad) 2009-Apr-20 19:46:28 INFO5 check_wapp_levels: WAPP power levels are between 0.021 and 0.056 (still bad) 2009-Apr-20 19:46:29 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = -193.5) to the azimuth limit 0 degrees! 2009-Apr-20 19:46:29 LOG4 CIMA-warn_on_position: Current position: Az/ZA = -193.4811 2.9150 RA/Dec = 09:15:40 +21:17:35 2009-Apr-20 19:46:30 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.021 < 0.75)! 2009-Apr-20 19:46:30 LOG4 check_wapp_levels: WAPP-1 power levels: 0.022 0.022 0.023 0.023 2009-Apr-20 19:46:30 LOG4 check_wapp_levels: WAPP-2 power levels: 0.022 0.021 0.024 0.022 2009-Apr-20 19:46:30 LOG4 check_wapp_levels: WAPP-3 power levels: 0.024 0.022 0.023 0.021 2009-Apr-20 19:46:30 LOG4 check_wapp_levels: WAPP-4 power levels: 0.023 0.051 0.023 0.056 2009-Apr-20 19:46:32 INFO5 check_wapp_levels: WAPP power levels are between 0.019 and 0.056 (still bad) 2009-Apr-20 19:46:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-20 19:46:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.108 (still bad) 2009-Apr-20 19:46:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.104 (still bad) 2009-Apr-20 19:46:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-20 19:46:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.105 (still bad) 2009-Apr-20 19:46:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.104 (still bad) 2009-Apr-20 19:46:46 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.100 (still bad) 2009-Apr-20 19:46:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Apr-20 19:46:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.102 (still bad) 2009-Apr-20 19:46:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Apr-20 19:46:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.101 (still bad) 2009-Apr-20 19:46:56 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Apr-20 19:46:58 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.099 (still bad) 2009-Apr-20 19:46:59 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = -193.5) to the azimuth limit 0 degrees! 2009-Apr-20 19:46:59 LOG4 CIMA-warn_on_position: Current position: Az/ZA = -193.4811 2.9150 RA/Dec = 09:16:10 +21:17:35 2009-Apr-20 19:47:00 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Apr-20 19:47:02 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.100 (still bad) 2009-Apr-20 19:47:04 COMMAND CIMA-send_to_exec: Sending command to abort observation 2009-Apr-20 19:47:04 LOG4 exec_msg: From OBSERVER: abort_task abort 2009-Apr-20 19:47:04 WARNING abort_task: WARNING abort requested! 2009-Apr-20 19:47:04 WARNING abort_task: WARNING Aborting waiting on WAPP spectra 2009-Apr-20 19:47:04 WARNING abort_task: WARNING Aborting wait for waiting on WAPP spectra 2009-Apr-20 19:47:04 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'ABORT' 2009-Apr-20 19:47:04 LOG5 end_task: Level: (3) ID = <10165> Status = 1 0 0 0 abort 2009-Apr-20 19:47:04 LOG4 stop_backends: Calling 'stop_backends' 2009-Apr-20 19:47:04 START begin_task: Starting task 'stopping the WAPPs' 2009-Apr-20 19:47:04 LOG5 begin_task: Level: (3) ID = <10166> Status = 1 0 0 0 abort 2009-Apr-20 19:47:04 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Stopping the WAPPs ...} 2009-Apr-20 19:47:05 INFO1 stop_wapp: Stopping the WAPPs 2009-Apr-20 19:47:05 LOG3 send_to_one_wapp: To WAPPCON: ABORT 2009-Apr-20 19:47:05 LOG3 send_to_one_wapp: To WAPPCON2: ABORT 2009-Apr-20 19:47:05 LOG3 send_to_one_wapp: To WAPPCON3: ABORT 2009-Apr-20 19:47:05 LOG3 send_to_one_wapp: To WAPPCON4: ABORT 2009-Apr-20 19:47:05 START begin_task: Starting task 'waiting on stopping WAPPs' 2009-Apr-20 19:47:05 LOG5 begin_task: Level: (4) ID = <10167> Status = 1 0 0 0 abort 2009-Apr-20 19:47:05 INFO5 check_wapp_levels: WAPP power levels are between 0.108 and 1.098 (still bad) 2009-Apr-20 19:47:05 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ABORT' 2009-Apr-20 19:47:06 NOTE WAPP=1+2+3+4-wappcon: WAPP successfully aborted! 2009-Apr-20 19:47:06 LOG4 WAPP=1+2+3+4-start_spectra: Abort request received 2009-Apr-20 19:47:06 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:47:06 STOP end_task: Finishing task 'waiting on stopping WAPPs' with status 'ABORT' 2009-Apr-20 19:47:06 LOG5 end_task: Level: (4) ID = <10167> Status = 1 0 0 0 abort 2009-Apr-20 19:47:06 STOP end_task: Finishing task 'stopping the WAPPs' with status 'ABORT' 2009-Apr-20 19:47:06 LOG5 end_task: Level: (3) ID = <10166> Status = 1 0 0 0 abort 2009-Apr-20 19:47:06 STOP end_task: Finishing task 'WAPP spectral observation' with status 'ABORT' 2009-Apr-20 19:47:06 LOG5 end_task: Level: (2) ID = <10164> Status = 1 0 0 0 abort 2009-Apr-20 19:47:06 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Apr-20 19:47:06 LOG5 finish_task: Level: (1) ID = <10138> Status = 1 0 0 0 abort 2009-Apr-20 19:47:06 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2009-Apr-20 19:47:06 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-Apr-20 19:47:06 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2009-Apr-20 19:47:06 LOG5 end_task: Level: (1) ID = <10138> Status = 1 0 0 0 abort 2009-Apr-20 19:47:29 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = -193.5) to the azimuth limit 0 degrees! 2009-Apr-20 19:47:29 LOG4 CIMA-warn_on_position: Current position: Az/ZA = -193.4811 2.9150 RA/Dec = 09:16:41 +21:17:35 2009-Apr-20 19:47:59 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = -193.5) to the azimuth limit 0 degrees! 2009-Apr-20 19:47:59 LOG4 CIMA-warn_on_position: Current position: Az/ZA = -193.4811 2.9150 RA/Dec = 09:17:11 +21:17:35 2009-Apr-20 19:48:28 COMMAND CIMA-send_to_exec: Sending command to restart the WAPPs 2009-Apr-20 19:48:28 LOG4 exec_msg: From OBSERVER: restart_wapp 2009-Apr-20 19:48:28 LOG5 restart_wapp: Calling 'restart_wapp' 2009-Apr-20 19:48:28 BEGIN begin_task: Starting task 'restarting the WAPPs' 2009-Apr-20 19:48:28 LOG5 begin_task: Level: (1) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-20 19:48:28 NOTE restart_wapp: Restarting all WAPPs 2009-Apr-20 19:48:28 WARNING restart_wapp: WARNING don't forget to reconfigure the WAPPs after the restart! 2009-Apr-20 19:48:28 END end_task: Finishing task 'restarting the WAPPs' with status 'OK' 2009-Apr-20 19:48:28 LOG5 end_task: Level: (1) ID = <10168> Status = 0 0 0 0 ok 2009-Apr-20 19:48:28 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-20 19:48:28 LOG3 exec_msg: Closing socket 2009-Apr-20 19:48:28 LOG3 exec_msg: Closing socket 2009-Apr-20 19:48:28 LOG3 exec_msg: Closing socket 2009-Apr-20 19:48:28 LOG3 exec_msg: Closing socket 2009-Apr-20 19:48:29 WARNING CIMA-warn_on_position: WARNING the telescope is close (Az = -193.5) to the azimuth limit 0 degrees! 2009-Apr-20 19:48:29 LOG4 CIMA-warn_on_position: Current position: Az/ZA = -193.4811 2.9150 RA/Dec = 09:17:41 +21:17:36 2009-Apr-20 19:48:31 ALERT WAPP=1-wappcon: WAPP1 restarting 2009-Apr-20 19:48:31 ALERT WAPP=2-wappcon: WAPP2 restarting 2009-Apr-20 19:48:31 ALERT WAPP=3-wappcon: WAPP3 restarting 2009-Apr-20 19:48:31 ALERT WAPP=4-wappcon: WAPP4 restarting 2009-Apr-20 19:48:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled1) "1" 2009-Apr-20 19:48:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled2) "1" 2009-Apr-20 19:48:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled3) "1" 2009-Apr-20 19:48:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_enabled4) "1" 2009-Apr-20 19:48:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg1) "2 chan, 3-level" 2009-Apr-20 19:48:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg2) "2 chan, 3-level" 2009-Apr-20 19:48:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg3) "2 chan, 3-level" 2009-Apr-20 19:48:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_cfg4) "2 chan, 3-level" 2009-Apr-20 19:48:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw1) "100" 2009-Apr-20 19:48:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw2) "100" 2009-Apr-20 19:48:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw3) "100" 2009-Apr-20 19:48:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_bw4) "100" 2009-Apr-20 19:48:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(wapp_dumptime) "1" 2009-Apr-20 19:48:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(alfa) "1" 2009-Apr-20 19:48:38 LOG4 exec_msg: From OBSERVER: global wapp ; set wapp(dual) "1" 2009-Apr-20 19:48:38 COMMAND CIMA-send_to_exec: Sending command to configure the WAPPs 2009-Apr-20 19:48:38 LOG4 exec_msg: From OBSERVER: config_wapp_correlator 2009-Apr-20 19:48:38 BEGIN begin_task: Starting task 'configuring WAPPs' 2009-Apr-20 19:48:38 LOG5 begin_task: Level: (1) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-20 19:48:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Configuring WAPPs} TASKWAIT BITMAP stat_corr INFO {Configuring the WAPPs ...} 2009-Apr-20 19:48:38 INFO1 config_wapp_correlator: Starting to configure WAPP as correlator 2009-Apr-20 19:48:38 LOG2 set_cal_source: Setting cal signal control to the WAPPs 2009-Apr-20 19:48:38 START begin_task: Starting task 'selecting calibration port' 2009-Apr-20 19:48:38 LOG5 begin_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-20 19:48:38 LOG3 vw_send: To DATATAKING: calport 3 2009-Apr-20 19:48:38 LOG2 socket_wait: Starting sockwait on DATATAKING for 'calport' using string 'DONE' 2009-Apr-20 19:48:38 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:48:38 START begin_task: Starting task 'waiting on calport' 2009-Apr-20 19:48:38 LOG5 begin_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-20 19:48:39 LOG4 got_cormsg: From DATATAKING: calport 3 2009-Apr-20 19:48:39 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:48:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:48:39 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:48:39 STOP end_task: Finishing task 'waiting on calport' with status 'OK' 2009-Apr-20 19:48:39 LOG5 end_task: Level: (3) ID = <10171> Status = 0 0 0 0 ok 2009-Apr-20 19:48:39 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'calport' 2009-Apr-20 19:48:39 STOP end_task: Finishing task 'selecting calibration port' with status 'OK' 2009-Apr-20 19:48:39 LOG5 end_task: Level: (2) ID = <10170> Status = 0 0 0 0 ok 2009-Apr-20 19:48:39 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-20 19:48:39 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-20 19:48:39 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-20 19:48:39 LOG5 begin_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-20 19:48:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:48:39 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-20 19:48:39 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-20 19:48:39 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-20 19:48:39 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-20 19:48:39 LOG5 end_task: Level: (2) ID = <10172> Status = 0 0 0 0 ok 2009-Apr-20 19:48:39 LOG3 send_to_one_wapp: To WAPPCON: VERBOSE 0 2009-Apr-20 19:48:39 LOG3 send_to_one_wapp: To WAPPCON2: VERBOSE 0 2009-Apr-20 19:48:39 LOG3 send_to_one_wapp: To WAPPCON3: VERBOSE 0 2009-Apr-20 19:48:39 LOG3 send_to_one_wapp: To WAPPCON4: VERBOSE 0 2009-Apr-20 19:48:39 LOG3 send_to_one_wapp: To WAPPCON: TIMEOUT 5 2009-Apr-20 19:48:39 LOG3 send_to_one_wapp: To WAPPCON2: TIMEOUT 5 2009-Apr-20 19:48:40 LOG3 send_to_one_wapp: To WAPPCON3: TIMEOUT 5 2009-Apr-20 19:48:40 LOG3 send_to_one_wapp: To WAPPCON4: TIMEOUT 5 2009-Apr-20 19:48:40 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-20 19:48:40 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-20 19:48:40 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-20 19:48:40 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-20 19:48:40 LOG3 wapp_calcontrol: To CALCONTROL: TRIGCLOCK 2009-Apr-20 19:48:40 LOG3 sock_errsend: To CALCONTROL: TRIGCLOCK STATUS 2009-Apr-20 19:48:40 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-20 19:48:40 LOG5 begin_task: Level: (2) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-20 19:48:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'VERBOSE 0' 2009-Apr-20 19:48:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'TIMEOUT 5' 2009-Apr-20 19:48:40 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-20 19:48:40 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-20 19:48:40 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-20 19:48:40 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-20 19:48:40 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-20 19:48:40 LOG5 end_task: Level: (2) ID = <10173> Status = 0 0 0 0 ok 2009-Apr-20 19:48:40 LOG3 sock_errsend: To WAPPDATA: FLUSH 2009-Apr-20 19:48:40 STOP finish_task: Finishing task 'configuring WAPPs' 2009-Apr-20 19:48:40 LOG5 finish_task: Level: (1) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-20 19:48:40 DONE finish_task: DONE finished configuring: the WAPPs in ALFA mode 2009-Apr-20 19:48:40 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:48:40 END end_task: Finishing task 'configuring WAPPs' with status 'OK' 2009-Apr-20 19:48:40 LOG5 end_task: Level: (1) ID = <10169> Status = 0 0 0 0 ok 2009-Apr-20 19:48:40 INFO1 WAPPDATA-flush_pending: WAPPDATA ready 2009-Apr-20 19:48:53 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-20 19:48:53 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-20 19:48:53 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:48:53 LOG5 begin_task: Level: (1) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-20 19:48:53 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-20 19:48:53 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-20 19:48:53 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-20 19:48:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-20 19:48:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:48:53 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-20 19:48:53 LOG5 begin_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2009-Apr-20 19:48:53 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-20 19:48:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:48:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:48:56 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:48:56 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-20 19:48:56 LOG5 end_task: Level: (2) ID = <10175> Status = 0 0 0 0 ok 2009-Apr-20 19:48:56 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-20 19:48:56 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:48:56 LOG5 begin_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2009-Apr-20 19:48:56 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-20 19:48:56 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:48:56 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:48:56 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:48:56 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:48:56 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-20 19:48:56 LOG5 begin_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2009-Apr-20 19:48:56 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:48:56 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-20 19:48:57 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-20 19:48:57 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2009-Apr-20 19:48:57 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-20 19:48:57 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 3 dB 2009-Apr-20 19:48:57 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-20 19:48:57 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-20 19:48:57 LOG5 end_task: Level: (3) ID = <10177> Status = 0 0 0 0 ok 2009-Apr-20 19:48:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.009 0.896 ALFA beam 1: 1.054 1.082 2009-Apr-20 19:48:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.001 0.956 ALFA beam 3: 1.064 0.902 2009-Apr-20 19:48:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.069 0.918 ALFA beam 5: 1.042 0.981 2009-Apr-20 19:48:57 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.883 0.105 ALFA beam 7: 0.978 0.129 2009-Apr-20 19:48:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:48:57 LOG5 finish_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2009-Apr-20 19:48:57 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-20 19:48:57 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:48:57 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-20 19:48:57 LOG5 end_task: Level: (2) ID = <10176> Status = 0 0 0 0 ok 2009-Apr-20 19:48:57 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-20 19:48:57 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:48:57 LOG5 finish_task: Level: (1) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-20 19:48:57 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-20 19:48:57 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:48:57 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-20 19:48:57 LOG5 end_task: Level: (1) ID = <10174> Status = 0 0 0 0 ok 2009-Apr-20 19:48:59 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:48:59 LOG4 check_wapp_levels: WAPP-1 power levels: 1.009 0.896 1.054 1.082 2009-Apr-20 19:48:59 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.956 1.064 0.902 2009-Apr-20 19:48:59 LOG4 check_wapp_levels: WAPP-3 power levels: 1.069 0.918 1.042 0.981 2009-Apr-20 19:48:59 LOG4 check_wapp_levels: WAPP-4 power levels: 0.883 0.105 0.978 0.129 2009-Apr-20 19:49:01 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-20 19:49:01 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift88p1 091900.0 +211730 J 0 Topocentric velocity(optical) 2009-Apr-20 19:49:01 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift88p1 091900.0 +211730 J 0 Topocentric velocity(optical)' 2009-Apr-20 19:49:01 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-20 19:49:01 LOG5 begin_task: Level: (1) ID = <10178> Status = 0 0 0 0 ok 2009-Apr-20 19:49:01 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift88p1' 2009-Apr-20 19:49:01 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-20 19:49:01 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift88p1} 2009-Apr-20 19:49:01 INFO5 fixed_driftmap: Start: year = 2009.3034242147692 RA = 09:19:33.1 Dec = +21:15:07.4 2009-Apr-20 19:49:01 NOTE fixed_driftmap: Setting ZA to 2:53:53.7 ... 2009-Apr-20 19:49:01 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 2.90 2009-Apr-20 19:49:01 LOG3 track_source: Calling 'track_source drift88p1 180.0 2.8982598950 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-20 19:49:01 START begin_task: Starting task 'sending tracking commands' 2009-Apr-20 19:49:01 LOG5 begin_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2009-Apr-20 19:49:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift88p1} INFO {Slewing to source 'drift88p1' ...} 2009-Apr-20 19:49:01 INFO1 track_source: Starting to track drift88p1 2009-Apr-20 19:49:01 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift88p1" 2009-Apr-20 19:49:01 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-20 19:49:01 LOG3 vw_send: To DATATAKING: set dec 2.8982598950 2009-Apr-20 19:49:01 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-20 19:49:01 LOG3 vw_send: To DATATAKING: pnt tr 180.0 2.8982598950 -CF 2009-Apr-20 19:49:01 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-20 19:49:01 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-20 19:49:01 LOG5 finish_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2009-Apr-20 19:49:01 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-20 19:49:01 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:49:01 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-20 19:49:01 LOG5 end_task: Level: (2) ID = <10179> Status = 0 0 0 0 ok 2009-Apr-20 19:49:01 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-20 19:49:01 LOG5 begin_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2009-Apr-20 19:49:01 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-20 19:49:01 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-20 19:49:01 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-20 19:49:01 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-20 19:49:01 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-20 19:49:01 LOG5 begin_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2009-Apr-20 19:49:01 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift88p1" 2009-Apr-20 19:49:01 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-20 19:49:01 LOG4 got_cormsg: From DATATAKING: set dec 2.8982598950 2009-Apr-20 19:49:01 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-20 19:49:01 LOG4 got_cormsg: From DATATAKING: vw% 2.8982598950 2009-Apr-20 19:49:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:49:01 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-20 19:49:01 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 2.8982598950 -CF 2009-Apr-20 19:49:01 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-20 19:49:01 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-20 19:49:01 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:49:02 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-20 19:49:02 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-20 19:49:02 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-20 19:49:02 LOG5 end_task: Level: (3) ID = <10181> Status = 0 0 0 0 ok 2009-Apr-20 19:49:02 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-20 19:49:02 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-20 19:49:02 LOG5 finish_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2009-Apr-20 19:49:02 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-20 19:49:02 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:49:02 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-20 19:49:02 LOG5 end_task: Level: (2) ID = <10180> Status = 0 0 0 0 ok 2009-Apr-20 19:49:02 START begin_task: Starting task 'waiting on telescope' 2009-Apr-20 19:49:02 LOG5 begin_task: Level: (2) ID = <10182> Status = 0 0 0 0 ok 2009-Apr-20 19:49:02 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-20 19:49:02 LOG3 waittrk: Start waittrk 5 2009-Apr-20 19:49:02 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-20 19:49:02 LOG5 begin_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2009-Apr-20 19:49:07 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-20 19:49:07 LOG5 end_task: Level: (3) ID = <10183> Status = 0 0 0 0 ok 2009-Apr-20 19:49:07 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-20 19:49:07 LOG5 begin_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2009-Apr-20 19:49:08 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-20 19:49:08 LOG5 end_task: Level: (3) ID = <10184> Status = 0 0 0 0 ok 2009-Apr-20 19:49:09 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-20 19:49:09 INFO2 waittrk: Now tracking drift88p1 2009-Apr-20 19:49:09 LOG4 waittrk: Current telescope position: Az = 179.75 ZA = 2.91 2009-Apr-20 19:49:09 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-20 19:49:09 LOG5 finish_task: Level: (2) ID = <10182> Status = 0 0 0 0 ok 2009-Apr-20 19:49:09 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-20 19:49:09 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:49:09 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-20 19:49:09 LOG5 end_task: Level: (2) ID = <10182> Status = 0 0 0 0 ok 2009-Apr-20 19:49:09 START begin_task: Starting task 'selecting calibration type' 2009-Apr-20 19:49:09 LOG5 begin_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2009-Apr-20 19:49:09 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-20 19:49:09 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-20 19:49:09 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:49:09 START begin_task: Starting task 'waiting on setcal' 2009-Apr-20 19:49:09 LOG5 begin_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2009-Apr-20 19:49:09 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-20 19:49:09 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:49:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:49:09 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:49:09 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-20 19:49:09 LOG5 end_task: Level: (3) ID = <10186> Status = 0 0 0 0 ok 2009-Apr-20 19:49:09 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-20 19:49:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-20 19:49:09 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-20 19:49:09 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-20 19:49:09 LOG5 begin_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2009-Apr-20 19:49:09 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:49:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-20 19:49:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-20 19:49:09 LOG5 end_task: Level: (3) ID = <10187> Status = 0 0 0 0 ok 2009-Apr-20 19:49:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-20 19:49:09 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-20 19:49:09 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-20 19:49:09 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:49:09 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-20 19:49:09 LOG5 begin_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2009-Apr-20 19:49:09 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-20 19:49:09 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-20 19:49:09 LOG5 end_task: Level: (3) ID = <10188> Status = 0 0 0 0 ok 2009-Apr-20 19:49:09 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-20 19:49:09 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:49:09 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-20 19:49:09 LOG5 end_task: Level: (2) ID = <10185> Status = 0 0 0 0 ok 2009-Apr-20 19:49:09 LOG5 dopset_later: Calling 'dopset_later 38.810286228369414' 2009-Apr-20 19:49:09 INFO3 dopset_later: Setting Doppler correction for 19:49:48 (38.8 seconds from now) 2009-Apr-20 19:49:09 LOG5 antvel: Calling 'antvel 180.000000 2.898260 F Topocentric 38.810286228369414' 2009-Apr-20 19:49:09 LOG2 antvel: Transforming current Az = 180.00 ZA = 2.90 to apparent RA = 09:19:33.0 Dec = +21:15:07.4 2009-Apr-20 19:49:09 LOG2 antvel: Parameters to Doppler: Topocentric 85788 2009 110 0.0 2009-Apr-20 19:49:09 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:49:09 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-20 19:49:09 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-20 19:49:09 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:49:09 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:49:09 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-20 19:49:09 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:49:09 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:49:09 LOG5 begin_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2009-Apr-20 19:49:09 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-20 19:49:09 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-20 19:49:10 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-20 19:49:10 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-20 19:49:10 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:49:10 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-20 19:49:10 LOG5 begin_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2009-Apr-20 19:49:10 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-20 19:49:10 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:49:10 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-20 19:49:10 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-20 19:49:10 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:49:12 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:49:12 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:49:12 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-20 19:49:12 LOG5 end_task: Level: (3) ID = <10190> Status = 0 0 0 0 ok 2009-Apr-20 19:49:12 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-20 19:49:12 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:49:12 LOG5 begin_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2009-Apr-20 19:49:13 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-20 19:49:13 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:49:13 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:49:13 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:49:13 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:49:13 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-20 19:49:13 LOG5 begin_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2009-Apr-20 19:49:13 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-20 19:49:13 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:49:13 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-20 19:49:13 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 3 dB 2009-Apr-20 19:49:13 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2009-Apr-20 19:49:13 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-20 19:49:13 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-20 19:49:13 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-20 19:49:13 LOG5 end_task: Level: (4) ID = <10192> Status = 0 0 0 0 ok 2009-Apr-20 19:49:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.012 0.896 ALFA beam 1: 1.053 1.083 2009-Apr-20 19:49:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.005 0.956 ALFA beam 3: 1.086 0.924 2009-Apr-20 19:49:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.089 0.940 ALFA beam 5: 1.039 0.998 2009-Apr-20 19:49:13 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.899 0.107 ALFA beam 7: 0.990 0.132 2009-Apr-20 19:49:13 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:49:13 LOG5 finish_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2009-Apr-20 19:49:13 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-20 19:49:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:49:13 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-20 19:49:13 LOG5 end_task: Level: (3) ID = <10191> Status = 0 0 0 0 ok 2009-Apr-20 19:49:13 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-20 19:49:13 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:49:13 LOG5 finish_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2009-Apr-20 19:49:13 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-20 19:49:13 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:49:13 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-20 19:49:13 LOG5 end_task: Level: (2) ID = <10189> Status = 0 0 0 0 ok 2009-Apr-20 19:49:13 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:19:33.1 LST = 09:18:58.2 diff = 34.9 secs 2009-Apr-20 19:49:13 INFO2 fixed_driftmap: Waiting 32.9 seconds for RA 9:19:33 2009-Apr-20 19:49:13 INFO2 lstwait: Waiting for 32.8 secs from LST 09:18:58 to LST 09:19:31 ... 2009-Apr-20 19:49:13 LOG4 send_obs_status: To obs_status: <1> TASKTIME 32.816297024531281 BITMAP stat_wait MESSAGE {Waiting ...} 2009-Apr-20 19:49:14 START begin_task: Starting task 'waiting on wait on LST' 2009-Apr-20 19:49:14 LOG5 begin_task: Level: (2) ID = <10193> Status = 0 0 0 0 ok 2009-Apr-20 19:49:15 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-20 19:49:15 LOG4 check_wapp_levels: WAPP-1 power levels: 1.012 0.896 1.053 1.083 2009-Apr-20 19:49:15 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.956 1.086 0.924 2009-Apr-20 19:49:15 LOG4 check_wapp_levels: WAPP-3 power levels: 1.089 0.940 1.039 0.998 2009-Apr-20 19:49:15 LOG4 check_wapp_levels: WAPP-4 power levels: 0.899 0.107 0.990 0.132 2009-Apr-20 19:49:27 COMMAND CIMA-send_to_exec: Sending command to abort observation 2009-Apr-20 19:49:27 LOG4 exec_msg: From OBSERVER: abort_task abort 2009-Apr-20 19:49:27 WARNING abort_task: WARNING abort requested! 2009-Apr-20 19:49:27 WARNING abort_task: WARNING Aborting wait for waiting on wait on LST 2009-Apr-20 19:49:27 STOP end_task: Finishing task 'waiting on wait on LST' with status 'ABORT' 2009-Apr-20 19:49:27 LOG5 end_task: Level: (2) ID = <10193> Status = 1 0 0 0 abort 2009-Apr-20 19:49:27 LOG4 lstwait: Finished waiting -18.87 seconds late 2009-Apr-20 19:49:27 LOG4 send_obs_status: To obs_status: <1> CLEARTIME BITMAP stat_busy 2009-Apr-20 19:49:28 STOP finish_task: Finishing task 'fixed azimuth drift map' 2009-Apr-20 19:49:28 LOG5 finish_task: Level: (1) ID = <10178> Status = 1 0 0 0 abort 2009-Apr-20 19:49:28 WARNING finish_task: WARNING aborted pattern: fixed azimuth drift map 2009-Apr-20 19:49:28 LOG4 send_obs_status: To obs_status: <1> ENDTASK Aborted 2009-Apr-20 19:49:28 END end_task: Finishing task 'fixed azimuth drift map' with status 'ABORT' 2009-Apr-20 19:49:28 LOG5 end_task: Level: (1) ID = <10178> Status = 1 0 0 0 abort 2009-Apr-20 19:49:31 COMMAND CIMA-send_to_exec: Sending command to start new FITS-file 2009-Apr-20 19:49:31 LOG4 exec_msg: From OBSERVER: new_file manual 2009-Apr-20 19:49:31 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-20 19:49:31 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-20 19:49:31 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-20 19:49:31 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-20 19:49:31 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-20 19:49:32 NOTE WAPPDATA-new_file: New FITS file: wapp.20090420.a2010.0017.fits 2009-Apr-20 19:49:32 LOG4 send_obs_status: To obs_status: <1> FILENAME {wapp.20090420.a2010.0017.fits} 2009-Apr-20 19:49:33 COMMAND CIMA-send_to_exec: Sending command to adjust IF1+IF2+WAPP power 2009-Apr-20 19:49:33 LOG4 exec_msg: From OBSERVER: adjust_power WAPP all 2009-Apr-20 19:49:33 BEGIN begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:49:33 LOG5 begin_task: Level: (1) ID = <10194> Status = 0 0 0 0 ok 2009-Apr-20 19:49:33 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-20 19:49:33 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-20 19:49:33 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-20 19:49:33 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-20 19:49:34 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:49:34 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-20 19:49:34 LOG5 begin_task: Level: (2) ID = <10195> Status = 0 0 0 0 ok 2009-Apr-20 19:49:34 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-20 19:49:34 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:49:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:49:36 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:49:36 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-20 19:49:36 LOG5 end_task: Level: (2) ID = <10195> Status = 0 0 0 0 ok 2009-Apr-20 19:49:36 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-20 19:49:36 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:49:36 LOG5 begin_task: Level: (2) ID = <10196> Status = 0 0 0 0 ok 2009-Apr-20 19:49:36 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-20 19:49:36 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:49:36 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:49:36 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:49:36 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:49:36 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-20 19:49:36 LOG5 begin_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2009-Apr-20 19:49:36 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-20 19:49:36 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:49:37 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-20 19:49:37 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 3 dB 2009-Apr-20 19:49:37 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2009-Apr-20 19:49:37 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-20 19:49:37 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-20 19:49:37 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-20 19:49:37 LOG5 end_task: Level: (3) ID = <10197> Status = 0 0 0 0 ok 2009-Apr-20 19:49:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.007 0.894 ALFA beam 1: 1.053 1.085 2009-Apr-20 19:49:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.000 0.955 ALFA beam 3: 1.082 0.917 2009-Apr-20 19:49:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.092 0.941 ALFA beam 5: 1.040 0.994 2009-Apr-20 19:49:37 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.899 0.107 ALFA beam 7: 0.990 0.131 2009-Apr-20 19:49:37 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:49:37 LOG5 finish_task: Level: (2) ID = <10196> Status = 0 0 0 0 ok 2009-Apr-20 19:49:37 INFO2 finish_task: DONE finished adjusting: WAPP power 2009-Apr-20 19:49:37 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:49:37 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-20 19:49:37 LOG5 end_task: Level: (2) ID = <10196> Status = 0 0 0 0 ok 2009-Apr-20 19:49:37 LOG4 send_obs_status: To obs_status: <1> BITMAP stat_busy 2009-Apr-20 19:49:37 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:49:37 LOG5 finish_task: Level: (1) ID = <10194> Status = 0 0 0 0 ok 2009-Apr-20 19:49:37 DONE finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-20 19:49:37 LOG4 send_obs_status: To obs_status: <1> ENDTASK Finished 2009-Apr-20 19:49:37 END end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-20 19:49:37 LOG5 end_task: Level: (1) ID = <10194> Status = 0 0 0 0 ok 2009-Apr-20 19:49:38 COMMAND CIMA-send_to_exec: Sending command to run fixed azimuth drift map 2009-Apr-20 19:49:38 LOG4 exec_msg: From OBSERVER: fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift88p1 091900.0 +211730 J 0 Topocentric velocity(optical) 2009-Apr-20 19:49:38 LOG1 fixed_driftmap: Calling 'fixed_driftmap follow 99 600 180.0 19.0 hcorcal 1 loopend-ON no off lcorcal first 1 drift88p1 091900.0 +211730 J 0 Topocentric velocity(optical)' 2009-Apr-20 19:49:38 BEGIN begin_task: Starting task 'fixed azimuth drift map' 2009-Apr-20 19:49:38 LOG5 begin_task: Level: (1) ID = <10198> Status = 0 0 0 0 ok 2009-Apr-20 19:49:38 INFO4 begin_task: MAKING 'fixed azimuth drift map' using 'alfa' + 'WAPP' on 'drift88p1' 2009-Apr-20 19:49:38 INFO1 fixed_driftmap: Starting pattern: Fixed azimuth drift map 2009-Apr-20 19:49:38 LOG4 send_obs_status: To obs_status: <1> NEWTASK {Fixed azimuth drift map} TOTALLOOPS 99 INFO {Starting fixed azimuth drift map observation ...} SOURCE {drift88p1} 2009-Apr-20 19:49:38 INFO5 fixed_driftmap: Start: year = 2009.3034254189165 RA = 09:19:33.1 Dec = +21:15:07.4 2009-Apr-20 19:49:38 NOTE fixed_driftmap: Setting ZA to 2:53:53.7 ... 2009-Apr-20 19:49:38 INFO3 fixed_driftmap: Sending telescope to Az = 180.00 and ZA = 2.90 2009-Apr-20 19:49:38 LOG3 track_source: Calling 'track_source drift88p1 180.0 2.8982599073 F 0.0 0.0 main small {} 0 Topocentric velocity(optical)' 2009-Apr-20 19:49:38 START begin_task: Starting task 'sending tracking commands' 2009-Apr-20 19:49:38 LOG5 begin_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2009-Apr-20 19:49:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Sending Tracking Commands} SOURCE {drift88p1} INFO {Slewing to source 'drift88p1' ...} 2009-Apr-20 19:49:38 INFO1 track_source: Starting to track drift88p1 2009-Apr-20 19:49:38 LOG3 vw_send: To DATATAKING: hdrldsrcnm "drift88p1" 2009-Apr-20 19:49:38 LOG3 vw_send: To DATATAKING: set ra 180.0 2009-Apr-20 19:49:38 LOG3 vw_send: To DATATAKING: set dec 2.8982599073 2009-Apr-20 19:49:38 LOG3 vw_send: To DATATAKING: pnt tr send 2009-Apr-20 19:49:38 LOG3 vw_send: To DATATAKING: pnt tr 180.0 2.8982599073 -CF 2009-Apr-20 19:49:38 LOG3 vw_send: To DATATAKING: dopsetvel 0 topo 2009-Apr-20 19:49:38 STOP finish_task: Finishing task 'sending tracking commands' 2009-Apr-20 19:49:38 LOG5 finish_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2009-Apr-20 19:49:38 INFO2 finish_task: DONE finished sending: tracking commands 2009-Apr-20 19:49:38 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:49:38 STOP end_task: Finishing task 'sending tracking commands' with status 'OK' 2009-Apr-20 19:49:38 LOG5 end_task: Level: (2) ID = <10199> Status = 0 0 0 0 ok 2009-Apr-20 19:49:38 START begin_task: Starting task 'rotate ALFA to +19 degrees' 2009-Apr-20 19:49:38 LOG5 begin_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2009-Apr-20 19:49:38 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Rotating ALFA} INFO {Rotating ALFA to +19 degrees ...} 2009-Apr-20 19:49:39 INFO2 rotate_alfa: ALFA commanded to +19.0 degrees 2009-Apr-20 19:49:39 LOG3 sock_errsend: To ALFAMOTOR: POSITION 19.0 REPLY 2009-Apr-20 19:49:39 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_alfa_rot MESSAGE {Waiting for ALFA to rotate into position ...} 2009-Apr-20 19:49:39 START begin_task: Starting task 'waiting on ALFA rotation' 2009-Apr-20 19:49:39 LOG5 begin_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2009-Apr-20 19:49:39 LOG4 got_cormsg: From DATATAKING: hdrldsrcnm "drift88p1" 2009-Apr-20 19:49:39 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-20 19:49:39 LOG4 check_wapp_levels: WAPP-1 power levels: 1.007 0.894 1.053 1.085 2009-Apr-20 19:49:39 LOG4 check_wapp_levels: WAPP-2 power levels: 1.000 0.955 1.082 0.917 2009-Apr-20 19:49:39 LOG4 check_wapp_levels: WAPP-3 power levels: 1.092 0.941 1.040 0.994 2009-Apr-20 19:49:39 LOG4 check_wapp_levels: WAPP-4 power levels: 0.899 0.107 0.990 0.131 2009-Apr-20 19:49:39 LOG4 got_cormsg: From DATATAKING: set ra 180.0 2009-Apr-20 19:49:39 LOG4 got_cormsg: From DATATAKING: set dec 2.8982599073 2009-Apr-20 19:49:39 LOG4 got_cormsg: From DATATAKING: vw% 180.0 2009-Apr-20 19:49:39 LOG4 got_cormsg: From DATATAKING: vw% 2.8982599073 2009-Apr-20 19:49:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:49:39 LOG4 got_cormsg: From DATATAKING: pnt tr send 2009-Apr-20 19:49:39 LOG4 got_cormsg: From DATATAKING: pnt tr 180.0 2.8982599073 -CF 2009-Apr-20 19:49:39 LOG4 got_cormsg: From DATATAKING: dopsetvel 0 topo 2009-Apr-20 19:49:39 LOG4 got_cormsg: From DATATAKING: vw% vw% 2009-Apr-20 19:49:39 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:49:39 LOG4 exec_msg: From ALFAMOTOR: alfa_motor "INPOSITION" 2009-Apr-20 19:49:39 INFO3 alfa_motor: ALFA rotator in-position +19.00 degrees 2009-Apr-20 19:49:39 STOP end_task: Finishing task 'waiting on ALFA rotation' with status 'OK' 2009-Apr-20 19:49:39 LOG5 end_task: Level: (3) ID = <10201> Status = 0 0 0 0 ok 2009-Apr-20 19:49:39 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-20 19:49:39 STOP finish_task: Finishing task 'rotate ALFA to +19 degrees' 2009-Apr-20 19:49:39 LOG5 finish_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2009-Apr-20 19:49:39 INFO2 finish_task: DONE finished configuration: rotating ALFA to +19 degrees 2009-Apr-20 19:49:39 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:49:39 STOP end_task: Finishing task 'rotate ALFA to +19 degrees' with status 'OK' 2009-Apr-20 19:49:39 LOG5 end_task: Level: (2) ID = <10200> Status = 0 0 0 0 ok 2009-Apr-20 19:49:39 START begin_task: Starting task 'waiting on telescope' 2009-Apr-20 19:49:39 LOG5 begin_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2009-Apr-20 19:49:39 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Waiting On Telescope} TASKWAIT BITMAP stat_slew INFO {Waiting for telescope to track source ...} 2009-Apr-20 19:49:40 LOG3 waittrk: Start waittrk 5 2009-Apr-20 19:49:40 START begin_task: Starting task 'waiting on telescope movement' 2009-Apr-20 19:49:40 LOG5 begin_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2009-Apr-20 19:49:45 STOP end_task: Finishing task 'waiting on telescope movement' with status 'OK' 2009-Apr-20 19:49:45 LOG5 end_task: Level: (3) ID = <10203> Status = 0 0 0 0 ok 2009-Apr-20 19:49:45 START begin_task: Starting task 'waiting on telescope on source' 2009-Apr-20 19:49:45 LOG5 begin_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2009-Apr-20 19:49:46 STOP end_task: Finishing task 'waiting on telescope on source' with status 'OK' 2009-Apr-20 19:49:46 LOG5 end_task: Level: (3) ID = <10204> Status = 0 0 0 0 ok 2009-Apr-20 19:49:46 LOG4 send_obs_status: To obs_status: <0> CLEARTIME BITMAP stat_busy 2009-Apr-20 19:49:46 INFO2 waittrk: Now tracking drift88p1 2009-Apr-20 19:49:46 LOG4 waittrk: Current telescope position: Az = 179.75 ZA = 2.91 2009-Apr-20 19:49:46 STOP finish_task: Finishing task 'waiting on telescope' 2009-Apr-20 19:49:46 LOG5 finish_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2009-Apr-20 19:49:46 INFO2 finish_task: DONE finished waiting: telescope on source 2009-Apr-20 19:49:46 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:49:46 STOP end_task: Finishing task 'waiting on telescope' with status 'OK' 2009-Apr-20 19:49:46 LOG5 end_task: Level: (2) ID = <10202> Status = 0 0 0 0 ok 2009-Apr-20 19:49:46 START begin_task: Starting task 'selecting calibration type' 2009-Apr-20 19:49:46 LOG5 begin_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2009-Apr-20 19:49:46 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-20 19:49:46 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-20 19:49:46 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:49:46 START begin_task: Starting task 'waiting on setcal' 2009-Apr-20 19:49:46 LOG5 begin_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2009-Apr-20 19:49:46 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-20 19:49:46 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:49:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:49:46 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:49:46 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-20 19:49:46 LOG5 end_task: Level: (3) ID = <10206> Status = 0 0 0 0 ok 2009-Apr-20 19:49:46 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-20 19:49:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-20 19:49:46 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-20 19:49:46 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-20 19:49:46 LOG5 begin_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2009-Apr-20 19:49:46 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:49:46 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-20 19:49:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-20 19:49:46 LOG5 end_task: Level: (3) ID = <10207> Status = 0 0 0 0 ok 2009-Apr-20 19:49:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-20 19:49:46 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-20 19:49:46 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-20 19:49:46 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:49:46 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-20 19:49:46 LOG5 begin_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2009-Apr-20 19:49:46 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-20 19:49:46 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-20 19:49:46 LOG5 end_task: Level: (3) ID = <10208> Status = 0 0 0 0 ok 2009-Apr-20 19:49:46 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-20 19:49:46 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:49:46 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-20 19:49:46 LOG5 end_task: Level: (2) ID = <10205> Status = 0 0 0 0 ok 2009-Apr-20 19:49:46 LOG5 dopset_later: Calling 'dopset_later 1.8099791025654539' 2009-Apr-20 19:49:46 INFO3 dopset_later: Setting Doppler correction for 19:49:48 (1.8 seconds from now) 2009-Apr-20 19:49:46 LOG5 antvel: Calling 'antvel 180.000000 2.898260 F Topocentric 1.8099791025654539' 2009-Apr-20 19:49:46 LOG2 antvel: Transforming current Az = 180.00 ZA = 2.90 to apparent RA = 09:19:33.1 Dec = +21:15:07.4 2009-Apr-20 19:49:46 LOG2 antvel: Parameters to Doppler: Topocentric 85788 2009 110 0.0 2009-Apr-20 19:49:46 INFO5 antvel: Computed antenna velocity: +0.00000 km/s 2009-Apr-20 19:49:46 LOG3 dopset_gen: Parameters for 'rest2sky': vel=0.000000 veltype=velocity(optical) calctype=SUBBAND antvel=0.0 restcent=1385.0 rest0=1385.0 rest1=1385.0 rest2=1385.0 rest3=1385.0 rest4=1385.0 rest5=1385.0 rest6=1385.0 rest7=1385.0 2009-Apr-20 19:49:46 INFO4 dopset_gen: New sky frequencies: 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 1385.000000 2009-Apr-20 19:49:46 LOG3 dopset_gen: Parameters for 'sky2syn': skycent=1385.000000 sky0=1385.000000 sky1=1385.000000 sky2=1385.000000 sky3=1385.000000 sky4=1385.000000 sky5=1385.000000 sky6=1385.000000 sky7=1385.000000 dest0=250 dest1=250 dest2=250 dest3=250 dest4=250 dest5=250 dest6=250 dest7=250 2009-Apr-20 19:49:46 LOG2 dopset_gen: Result from 'sky2syn': 1635.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 2009-Apr-20 19:49:46 LOG3 vw_send: To DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-20 19:49:46 LOG3 vw_send: To DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:49:46 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:49:46 LOG5 begin_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2009-Apr-20 19:49:46 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP power} TASKWAIT BITMAP stat_power INFO {Adjusting WAPP power ...} 2009-Apr-20 19:49:47 INFO2 adjust_power: Starting to adjust WAPP power 2009-Apr-20 19:49:47 LOG3 vw_send: To DATATAKING: adjpwrif2 2009-Apr-20 19:49:47 LOG2 socket_wait: Starting sockwait on DATATAKING for 'adjpwrif2' using string 'DONE' 2009-Apr-20 19:49:47 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:49:47 START begin_task: Starting task 'waiting on adjpwrif2' 2009-Apr-20 19:49:47 LOG5 begin_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2009-Apr-20 19:49:47 LOG4 got_cormsg: From DATATAKING: if1 {if1_syn1 1635000000.0} 2009-Apr-20 19:49:47 LOG4 got_cormsg: From DATATAKING: if2 {if2_synfrq 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0} 2009-Apr-20 19:49:47 LOG4 got_cormsg: From DATATAKING: adjpwrif2 2009-Apr-20 19:49:47 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:49:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:49:47 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:49:49 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:49:50 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:49:50 STOP end_task: Finishing task 'waiting on adjpwrif2' with status 'OK' 2009-Apr-20 19:49:50 LOG5 end_task: Level: (3) ID = <10210> Status = 0 0 0 0 ok 2009-Apr-20 19:49:50 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'adjpwrif2' 2009-Apr-20 19:49:50 START begin_task: Starting task 'adjusting WAPP power' 2009-Apr-20 19:49:50 LOG5 begin_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2009-Apr-20 19:49:50 LOG4 send_obs_status: To obs_status: <0> NEWTASK {Adjusting WAPP Power} TASKWAIT BITMAP stat_power INFO {Adjusting power ...} 2009-Apr-20 19:49:50 LOG3 sock_errsend: To WAPPCON: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:49:50 LOG3 sock_errsend: To WAPPCON2: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:49:50 LOG3 sock_errsend: To WAPPCON3: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:49:50 LOG3 sock_errsend: To WAPPCON4: ADJUSTPOWER 100 1 2 0 1 1 2009-Apr-20 19:49:50 START begin_task: Starting task 'waiting on adjust WAPP power' 2009-Apr-20 19:49:50 LOG5 begin_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2009-Apr-20 19:49:50 LOG4 WAPP=1+2+3+4-wappcon: Received command 'ADJUSTPOWER 100 1 2 0 1 1' 2009-Apr-20 19:49:50 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:49:50 INFO2 WAPP=1-auto_atten_dual: Attenuators beam 0: 7 6 dB --- beam 1: 6 6 dB 2009-Apr-20 19:49:50 INFO2 WAPP=3-auto_atten_dual: Attenuators beam 4: 2 1 dB --- beam 5: 4 3 dB 2009-Apr-20 19:49:50 INFO2 WAPP=2-auto_atten_dual: Attenuators beam 2: 6 4 dB --- beam 3: 3 3 dB 2009-Apr-20 19:49:50 INFO2 WAPP=4-auto_atten_dual: Attenuators beam 6: 3 0 dB --- beam 7: 3 0 dB 2009-Apr-20 19:49:50 INFO1 WAPP=1+2+3+4-adjust_power: DONE adjusting power 2009-Apr-20 19:49:50 STOP end_task: Finishing task 'waiting on adjust WAPP power' with status 'OK' 2009-Apr-20 19:49:50 LOG5 end_task: Level: (4) ID = <10212> Status = 0 0 0 0 ok 2009-Apr-20 19:49:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 0: 1.001 0.889 ALFA beam 1: 1.050 1.076 2009-Apr-20 19:49:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 2: 1.000 0.949 ALFA beam 3: 1.081 0.914 2009-Apr-20 19:49:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 4: 1.085 0.940 ALFA beam 5: 1.037 0.991 2009-Apr-20 19:49:50 INFO2 wapp_adjpwr: WAPP power: ALFA beam 6: 0.898 0.107 ALFA beam 7: 0.990 0.131 2009-Apr-20 19:49:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:49:50 LOG5 finish_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2009-Apr-20 19:49:50 INFO3 finish_task: DONE finished adjusting: WAPP power 2009-Apr-20 19:49:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:49:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-20 19:49:50 LOG5 end_task: Level: (3) ID = <10211> Status = 0 0 0 0 ok 2009-Apr-20 19:49:50 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-20 19:49:50 STOP finish_task: Finishing task 'adjusting WAPP power' 2009-Apr-20 19:49:50 LOG5 finish_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2009-Apr-20 19:49:50 INFO2 finish_task: DONE finished adjusting: WAPP power levels 2009-Apr-20 19:49:50 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:49:50 STOP end_task: Finishing task 'adjusting WAPP power' with status 'OK' 2009-Apr-20 19:49:50 LOG5 end_task: Level: (2) ID = <10209> Status = 0 0 0 0 ok 2009-Apr-20 19:49:50 LOG1 fixed_driftmap: Parameters: HA = +00:00:00.0 Start = 09:19:33.1 LST = 09:19:35.3 diff = -2.2 secs 2009-Apr-20 19:49:50 WARNING fixed_driftmap: WARNING RA has already passed --- starting anyway! 2009-Apr-20 19:49:50 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-20 19:49:50 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-20 19:49:50 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-20 19:49:50 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-20 19:49:51 INFO5 new_file: There is no need to start a new FITS-file since the current one 'wapp.20090420.a2010.0017.fits' is empty! 2009-Apr-20 19:49:51 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 1 of 99 2009-Apr-20 19:49:51 LOG4 send_obs_status: To obs_status: <1> LOOP 1 2009-Apr-20 19:49:51 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-20 19:49:51 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-20 19:49:51 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-20 19:49:51 LOG5 begin_task: Level: (2) ID = <10213> Status = 0 0 0 0 ok 2009-Apr-20 19:49:51 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-20 19:49:51 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-20 19:49:51 INFO2 take_data: Starting WAPP 600-second scan: 911000223 2009-Apr-20 19:49:51 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-20 19:49:51 LOG5 begin_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2009-Apr-20 19:49:51 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-20 19:49:51 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:49:51 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-20 19:49:51 INFO1 WAPP=1+2+3+4-start_spectra: start sec 85792.00 2009-Apr-20 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:49:53 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.085 (still bad) 2009-Apr-20 19:49:53 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:49:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-20 19:49:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-20 19:49:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.101 (still bad) 2009-Apr-20 19:50:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-20 19:50:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.103 (still bad) 2009-Apr-20 19:50:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.096 (still bad) 2009-Apr-20 19:50:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.090 (still bad) 2009-Apr-20 19:50:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.090 (still bad) 2009-Apr-20 19:50:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2009-Apr-20 19:50:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.084 (still bad) 2009-Apr-20 19:50:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.089 (still bad) 2009-Apr-20 19:50:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.088 (still bad) 2009-Apr-20 19:50:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.092 (still bad) 2009-Apr-20 19:50:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2009-Apr-20 19:50:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.088 (still bad) 2009-Apr-20 19:50:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.086 (still bad) 2009-Apr-20 19:50:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.086 (still bad) 2009-Apr-20 19:50:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 19:50:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:50:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.084 (still bad) 2009-Apr-20 19:50:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:50:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:50:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:50:41 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-20 19:50:41 LOG4 check_wapp_levels: WAPP-1 power levels: 1.001 0.888 1.048 1.077 2009-Apr-20 19:50:41 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.949 1.076 0.908 2009-Apr-20 19:50:41 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.934 1.030 0.989 2009-Apr-20 19:50:41 LOG4 check_wapp_levels: WAPP-4 power levels: 0.895 0.106 0.986 0.131 2009-Apr-20 19:50:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 19:50:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:50:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:50:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:50:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2009-Apr-20 19:50:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:50:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:50:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:50:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:51:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:51:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:51:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:51:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:51:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:51:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:51:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:51:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:51:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:51:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 19:51:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:51:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:51:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:51:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:51:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:51:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:51:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:51:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:51:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:51:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:51:42 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-20 19:51:42 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 0.895 1.047 1.075 2009-Apr-20 19:51:42 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.952 1.080 0.906 2009-Apr-20 19:51:42 LOG4 check_wapp_levels: WAPP-3 power levels: 1.076 0.930 1.030 0.985 2009-Apr-20 19:51:42 LOG4 check_wapp_levels: WAPP-4 power levels: 0.893 0.106 0.986 0.130 2009-Apr-20 19:51:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:51:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:51:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:51:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:51:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:51:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:51:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:51:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:52:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:52:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:52:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:52:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:52:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:52:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:52:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:52:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:52:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:52:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2009-Apr-20 19:52:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.084 (still bad) 2009-Apr-20 19:52:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:52:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:52:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:52:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:52:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:52:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.086 (still bad) 2009-Apr-20 19:52:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:52:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:52:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:52:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:52:43 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-20 19:52:43 LOG4 check_wapp_levels: WAPP-1 power levels: 1.006 0.892 1.050 1.077 2009-Apr-20 19:52:43 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.953 1.080 0.905 2009-Apr-20 19:52:43 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.932 1.030 0.989 2009-Apr-20 19:52:43 LOG4 check_wapp_levels: WAPP-4 power levels: 0.894 0.106 0.987 0.130 2009-Apr-20 19:52:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:52:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:52:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:52:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:52:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:52:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:52:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.083 (still bad) 2009-Apr-20 19:52:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:53:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:53:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:53:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:53:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:53:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.084 (still bad) 2009-Apr-20 19:53:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:53:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:53:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 19:53:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:53:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:53:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.087 (still bad) 2009-Apr-20 19:53:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:53:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:53:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:53:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:53:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 19:53:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.085 (still bad) 2009-Apr-20 19:53:35 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.080 (still bad) 2009-Apr-20 19:53:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:53:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 19:53:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:53:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:53:45 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-20 19:53:45 LOG4 check_wapp_levels: WAPP-1 power levels: 1.017 0.896 1.055 1.079 2009-Apr-20 19:53:45 LOG4 check_wapp_levels: WAPP-2 power levels: 1.011 0.955 1.085 0.917 2009-Apr-20 19:53:45 LOG4 check_wapp_levels: WAPP-3 power levels: 1.084 0.936 1.037 0.995 2009-Apr-20 19:53:45 LOG4 check_wapp_levels: WAPP-4 power levels: 0.899 0.107 0.992 0.131 2009-Apr-20 19:53:47 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.080 (still bad) 2009-Apr-20 19:53:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:53:52 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.081 (still bad) 2009-Apr-20 19:53:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2009-Apr-20 19:53:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.081 (still bad) 2009-Apr-20 19:53:58 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.086 (still bad) 2009-Apr-20 19:54:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.078 (still bad) 2009-Apr-20 19:54:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.081 (still bad) 2009-Apr-20 19:54:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.080 (still bad) 2009-Apr-20 19:54:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.080 (still bad) 2009-Apr-20 19:54:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.081 (still bad) 2009-Apr-20 19:54:10 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.081 (still bad) 2009-Apr-20 19:54:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:54:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:54:16 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.081 (still bad) 2009-Apr-20 19:54:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.080 (still bad) 2009-Apr-20 19:54:20 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.081 (still bad) 2009-Apr-20 19:54:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.081 (still bad) 2009-Apr-20 19:54:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:54:26 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.080 (still bad) 2009-Apr-20 19:54:28 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2009-Apr-20 19:54:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:54:32 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.081 (still bad) 2009-Apr-20 19:54:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.082 (still bad) 2009-Apr-20 19:54:36 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2009-Apr-20 19:54:38 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.080 (still bad) 2009-Apr-20 19:54:40 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.078 (still bad) 2009-Apr-20 19:54:42 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2009-Apr-20 19:54:44 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2009-Apr-20 19:54:46 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.107 < 0.75)! 2009-Apr-20 19:54:46 LOG4 check_wapp_levels: WAPP-1 power levels: 1.014 0.892 1.049 1.075 2009-Apr-20 19:54:46 LOG4 check_wapp_levels: WAPP-2 power levels: 1.004 0.952 1.081 0.912 2009-Apr-20 19:54:46 LOG4 check_wapp_levels: WAPP-3 power levels: 1.079 0.929 1.032 0.991 2009-Apr-20 19:54:46 LOG4 check_wapp_levels: WAPP-4 power levels: 0.895 0.107 0.988 0.131 2009-Apr-20 19:54:48 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.080 (still bad) 2009-Apr-20 19:54:50 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2009-Apr-20 19:54:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:54:54 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.077 (still bad) 2009-Apr-20 19:54:56 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.078 (still bad) 2009-Apr-20 19:54:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:55:00 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2009-Apr-20 19:55:02 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.077 (still bad) 2009-Apr-20 19:55:04 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.078 (still bad) 2009-Apr-20 19:55:06 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.078 (still bad) 2009-Apr-20 19:55:08 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2009-Apr-20 19:55:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:55:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:55:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:55:17 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2009-Apr-20 19:55:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.078 (still bad) 2009-Apr-20 19:55:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.078 (still bad) 2009-Apr-20 19:55:23 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2009-Apr-20 19:55:25 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2009-Apr-20 19:55:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2009-Apr-20 19:55:29 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2009-Apr-20 19:55:31 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2009-Apr-20 19:55:33 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.080 (still bad) 2009-Apr-20 19:55:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:55:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:55:39 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2009-Apr-20 19:55:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:55:43 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.080 (still bad) 2009-Apr-20 19:55:45 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.086 (still bad) 2009-Apr-20 19:55:47 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-20 19:55:47 LOG4 check_wapp_levels: WAPP-1 power levels: 1.013 0.892 1.047 1.077 2009-Apr-20 19:55:47 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.954 1.081 0.908 2009-Apr-20 19:55:47 LOG4 check_wapp_levels: WAPP-3 power levels: 1.075 0.927 1.030 0.987 2009-Apr-20 19:55:47 LOG4 check_wapp_levels: WAPP-4 power levels: 0.895 0.106 0.987 0.131 2009-Apr-20 19:55:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:55:51 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 19:55:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:55:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:55:57 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.085 (still bad) 2009-Apr-20 19:55:59 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2009-Apr-20 19:56:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:56:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:56:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:56:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:56:09 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.083 (still bad) 2009-Apr-20 19:56:11 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.080 (still bad) 2009-Apr-20 19:56:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:56:15 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.084 (still bad) 2009-Apr-20 19:56:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:56:19 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.082 (still bad) 2009-Apr-20 19:56:21 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.085 (still bad) 2009-Apr-20 19:56:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 19:56:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:56:27 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.082 (still bad) 2009-Apr-20 19:56:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:56:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 19:56:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.087 (still bad) 2009-Apr-20 19:56:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.088 (still bad) 2009-Apr-20 19:56:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.090 (still bad) 2009-Apr-20 19:56:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-20 19:56:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.095 (still bad) 2009-Apr-20 19:56:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.096 (still bad) 2009-Apr-20 19:56:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.098 (still bad) 2009-Apr-20 19:56:48 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-20 19:56:48 LOG4 check_wapp_levels: WAPP-1 power levels: 1.013 0.891 1.049 1.074 2009-Apr-20 19:56:48 LOG4 check_wapp_levels: WAPP-2 power levels: 1.005 0.953 1.096 0.919 2009-Apr-20 19:56:48 LOG4 check_wapp_levels: WAPP-3 power levels: 1.074 0.929 1.027 0.990 2009-Apr-20 19:56:48 LOG4 check_wapp_levels: WAPP-4 power levels: 0.895 0.106 0.987 0.131 2009-Apr-20 19:56:50 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-20 19:56:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-20 19:56:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.086 (still bad) 2009-Apr-20 19:56:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2009-Apr-20 19:56:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.084 (still bad) 2009-Apr-20 19:57:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2009-Apr-20 19:57:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 19:57:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2009-Apr-20 19:57:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 19:57:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 19:57:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 19:57:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:57:14 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.079 (still bad) 2009-Apr-20 19:57:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:57:18 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.077 (still bad) 2009-Apr-20 19:57:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:57:22 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.086 (still bad) 2009-Apr-20 19:57:24 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.082 (still bad) 2009-Apr-20 19:57:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.087 (still bad) 2009-Apr-20 19:57:28 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.093 (still bad) 2009-Apr-20 19:57:30 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.094 (still bad) 2009-Apr-20 19:57:32 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.096 (still bad) 2009-Apr-20 19:57:34 INFO5 check_wapp_levels: WAPP power levels are between 0.107 and 1.099 (still bad) 2009-Apr-20 19:57:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.090 (still bad) 2009-Apr-20 19:57:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2009-Apr-20 19:57:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.086 (still bad) 2009-Apr-20 19:57:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:57:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:57:46 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2009-Apr-20 19:57:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:57:50 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-20 19:57:50 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 0.887 1.043 1.071 2009-Apr-20 19:57:50 LOG4 check_wapp_levels: WAPP-2 power levels: 1.003 0.951 1.075 0.902 2009-Apr-20 19:57:50 LOG4 check_wapp_levels: WAPP-3 power levels: 1.078 0.932 1.028 0.990 2009-Apr-20 19:57:50 LOG4 check_wapp_levels: WAPP-4 power levels: 0.892 0.106 0.983 0.130 2009-Apr-20 19:57:52 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:57:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 19:57:56 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:57:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2009-Apr-20 19:58:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:58:02 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.076 (still bad) 2009-Apr-20 19:58:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:58:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2009-Apr-20 19:58:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:58:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2009-Apr-20 19:58:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:58:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:58:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:58:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2009-Apr-20 19:58:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2009-Apr-20 19:58:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.084 (still bad) 2009-Apr-20 19:58:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2009-Apr-20 19:58:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.073 (still bad) 2009-Apr-20 19:58:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:58:31 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.074 (still bad) 2009-Apr-20 19:58:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.075 (still bad) 2009-Apr-20 19:58:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 19:58:37 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2009-Apr-20 19:58:39 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.076 (still bad) 2009-Apr-20 19:58:41 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:58:43 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2009-Apr-20 19:58:45 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:58:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.086 (still bad) 2009-Apr-20 19:58:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:58:51 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-20 19:58:51 LOG4 check_wapp_levels: WAPP-1 power levels: 1.004 0.886 1.044 1.072 2009-Apr-20 19:58:51 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.952 1.077 0.902 2009-Apr-20 19:58:51 LOG4 check_wapp_levels: WAPP-3 power levels: 1.073 0.928 1.025 0.980 2009-Apr-20 19:58:51 LOG4 check_wapp_levels: WAPP-4 power levels: 0.892 0.106 0.983 0.130 2009-Apr-20 19:58:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:58:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.076 (still bad) 2009-Apr-20 19:58:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2009-Apr-20 19:58:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 19:59:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.076 (still bad) 2009-Apr-20 19:59:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.076 (still bad) 2009-Apr-20 19:59:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.075 (still bad) 2009-Apr-20 19:59:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.075 (still bad) 2009-Apr-20 19:59:09 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.076 (still bad) 2009-Apr-20 19:59:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2009-Apr-20 19:59:13 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.075 (still bad) 2009-Apr-20 19:59:15 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.076 (still bad) 2009-Apr-20 19:59:17 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:59:19 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2009-Apr-20 19:59:21 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:59:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:59:25 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:59:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.076 (still bad) 2009-Apr-20 19:59:29 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:59:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.076 (still bad) 2009-Apr-20 19:59:34 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:59:36 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 19:59:38 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2009-Apr-20 19:59:40 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:59:42 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:59:44 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 19:59:46 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.080 (still bad) 2009-Apr-20 19:59:48 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.084 (still bad) 2009-Apr-20 19:59:50 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.078 (still bad) 2009-Apr-20 19:59:52 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 19:59:52 LOG4 check_wapp_levels: WAPP-1 power levels: 0.997 0.884 1.048 1.076 2009-Apr-20 19:59:52 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.952 1.075 0.897 2009-Apr-20 19:59:52 LOG4 check_wapp_levels: WAPP-3 power levels: 1.077 0.928 1.024 0.980 2009-Apr-20 19:59:52 LOG4 check_wapp_levels: WAPP-4 power levels: 0.889 0.105 0.980 0.129 2009-Apr-20 19:59:52 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:59:52 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-20 19:59:52 LOG5 end_task: Level: (3) ID = <10214> Status = 0 0 0 0 ok 2009-Apr-20 19:59:52 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-20 19:59:52 LOG5 end_task: Level: (2) ID = <10213> Status = 0 0 0 0 ok 2009-Apr-20 19:59:52 LOG1 fixed_driftmap: New position: year = 2009.3034448754024 RA = 09:29:06.8 RA/Dec = 09:29:39.8 +21:15:01.8 2009-Apr-20 19:59:52 NOTE fixed_driftmap: Correcting ZA to 2:53:48.1 ... 2009-Apr-20 19:59:52 LOG3 vw_send: To DATATAKING: pnt tr -UD 180.0 2.8967040715 -CF 2009-Apr-20 19:59:52 LOG2 take_cal: Calling 'take_cal hcorcal 1 1' 2009-Apr-20 19:59:52 START begin_task: Starting task 'WAPP calibration' 2009-Apr-20 19:59:52 LOG5 begin_task: Level: (2) ID = <10215> Status = 0 0 0 0 ok 2009-Apr-20 19:59:52 LOG4 send_obs_status: To obs_status: <0> NEWTASK {WAPP Calibration} INFO {Making WAPP calibration ...} 2009-Apr-20 19:59:53 START begin_task: Starting task 'selecting calibration type' 2009-Apr-20 19:59:53 LOG5 begin_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-Apr-20 19:59:53 LOG3 vw_send: To DATATAKING: setcal hcorcal 2009-Apr-20 19:59:53 LOG2 socket_wait: Starting sockwait on DATATAKING for 'setcal' using string 'DONE' 2009-Apr-20 19:59:53 LOG3 socket_wait: To DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:59:53 START begin_task: Starting task 'waiting on setcal' 2009-Apr-20 19:59:53 LOG5 begin_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2009-Apr-20 19:59:53 LOG4 got_cormsg: From DATATAKING: pnt tr -UD 180.0 2.8967040715 -CF 2009-Apr-20 19:59:53 LOG4 got_cormsg: From DATATAKING: setcal hcorcal 2009-Apr-20 19:59:53 LOG4 got_cormsg: From DATATAKING: puts {DONE}; flush stdout 2009-Apr-20 19:59:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:59:53 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:59:54 LOG4 got_cormsg: From DATATAKING: DONE 2009-Apr-20 19:59:54 STOP end_task: Finishing task 'waiting on setcal' with status 'OK' 2009-Apr-20 19:59:54 LOG5 end_task: Level: (4) ID = <10217> Status = 0 0 0 0 ok 2009-Apr-20 19:59:54 LOG3 socket_wait: DONE with sockwait on DATATAKING for 'setcal' 2009-Apr-20 19:59:54 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-20 19:59:54 LOG3 socket_wait: To ALFAMON: CAL HI 2009-Apr-20 19:59:54 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-20 19:59:54 LOG5 begin_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2009-Apr-20 19:59:54 LOG4 got_cormsg: From DATATAKING: vw% 2009-Apr-20 19:59:54 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:59:55 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-20 19:59:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-20 19:59:55 LOG5 end_task: Level: (4) ID = <10218> Status = 0 0 0 0 ok 2009-Apr-20 19:59:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-20 19:59:55 LOG3 to_alfamon: To ALFAMON: CAL HI 2009-Apr-20 19:59:55 LOG2 socket_wait: Starting sockwait on ALFAMON for 'command to ALFA' using string 'ACK' 2009-Apr-20 19:59:55 LOG3 socket_wait: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:59:55 START begin_task: Starting task 'waiting on command to ALFA' 2009-Apr-20 19:59:55 LOG5 begin_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2009-Apr-20 19:59:55 LOG4 got_alfamon: From ALFAMON: ACK 2009-Apr-20 19:59:55 STOP end_task: Finishing task 'waiting on command to ALFA' with status 'OK' 2009-Apr-20 19:59:55 LOG5 end_task: Level: (4) ID = <10219> Status = 0 0 0 0 ok 2009-Apr-20 19:59:55 LOG3 socket_wait: DONE with sockwait on ALFAMON for 'command to ALFA' 2009-Apr-20 19:59:55 LOG3 to_alfamon: To ALFAMON: NOISE ACTIVE 2009-Apr-20 19:59:55 STOP end_task: Finishing task 'selecting calibration type' with status 'OK' 2009-Apr-20 19:59:55 LOG5 end_task: Level: (3) ID = <10216> Status = 0 0 0 0 ok 2009-Apr-20 19:59:55 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_on MESSAGE {Setting CAL-ON ...} 2009-Apr-20 19:59:55 LOG3 wapp_calcontrol: To CALCONTROL: CALON 2009-Apr-20 19:59:55 LOG3 sock_errsend: To CALCONTROL: CALON STATUS 2009-Apr-20 19:59:55 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-20 19:59:55 LOG5 begin_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2009-Apr-20 19:59:55 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-20 19:59:55 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x03 2009-Apr-20 19:59:55 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-20 19:59:55 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-20 19:59:55 LOG5 end_task: Level: (3) ID = <10220> Status = 0 0 0 0 ok 2009-Apr-20 19:59:55 LOG4 take_data: Calling 'take_data 1 1 CAL ON stat_cal_on {CAL-ON spectra}' 2009-Apr-20 19:59:55 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-20 19:59:55 LOG5 begin_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2009-Apr-20 19:59:55 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for CAL-ON spectra ...} 2009-Apr-20 19:59:55 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-20 19:59:56 INFO2 take_data: Starting WAPP 1-second scan: 911000224 2009-Apr-20 19:59:56 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-20 19:59:56 LOG5 begin_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2009-Apr-20 19:59:56 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:59:56 LOG4 send_obs_status: To obs_status: <0> TASKTIME 1 BITMAP stat_cal_on MESSAGE {Taking CAL-ON spectra ...} 2009-Apr-20 19:59:56 INFO1 WAPP=1+2+3+4-start_spectra: start sec 86397.00 2009-Apr-20 19:59:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 19:59:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 19:59:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 19:59:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 19:59:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 19:59:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 19:59:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 19:59:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 19:59:58 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 19:59:58 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 19:59:58 INFO1 WAPP=1+2+3+4-start_spectra: DONE with spectral line observation 2009-Apr-20 19:59:58 STOP end_task: Finishing task 'waiting on WAPP spectra' with status 'OK' 2009-Apr-20 19:59:58 LOG5 end_task: Level: (4) ID = <10222> Status = 0 0 0 0 ok 2009-Apr-20 19:59:58 STOP end_task: Finishing task 'WAPP spectral observation' with status 'OK' 2009-Apr-20 19:59:58 LOG5 end_task: Level: (3) ID = <10221> Status = 0 0 0 0 ok 2009-Apr-20 19:59:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_cal_off MESSAGE {Setting CAL-OFF ...} 2009-Apr-20 19:59:58 LOG3 wapp_calcontrol: To CALCONTROL: CALOFF 2009-Apr-20 19:59:58 LOG3 sock_errsend: To CALCONTROL: CALOFF STATUS 2009-Apr-20 19:59:58 START begin_task: Starting task 'waiting on CALCONTROL command' 2009-Apr-20 19:59:58 LOG5 begin_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2009-Apr-20 19:59:58 LOG3 CALCONTROL-caltrig: Software trigger 2009-Apr-20 19:59:58 LOG1 CALCONTROL-caltrig: Cal/trigger control status 0x02 2009-Apr-20 19:59:58 LOG3 got_calcontrol: Received status OK from CALCONTROL 2009-Apr-20 19:59:58 STOP end_task: Finishing task 'waiting on CALCONTROL command' with status 'OK' 2009-Apr-20 19:59:58 LOG5 end_task: Level: (3) ID = <10223> Status = 0 0 0 0 ok 2009-Apr-20 19:59:58 LOG4 send_obs_status: To obs_status: <0> BITMAP stat_busy 2009-Apr-20 19:59:58 STOP finish_task: Finishing task 'WAPP calibration' 2009-Apr-20 19:59:58 LOG5 finish_task: Level: (2) ID = <10215> Status = 0 0 0 0 ok 2009-Apr-20 19:59:58 INFO2 finish_task: DONE finished calibration: WAPP calibration 2009-Apr-20 19:59:59 LOG4 send_obs_status: To obs_status: <0> ENDTASK Finished 2009-Apr-20 19:59:59 STOP end_task: Finishing task 'WAPP calibration' with status 'OK' 2009-Apr-20 19:59:59 LOG5 end_task: Level: (2) ID = <10215> Status = 0 0 0 0 ok 2009-Apr-20 19:59:59 INFO2 fixed_driftmap: Starting fixed azimuth drift map loop 2 of 99 2009-Apr-20 19:59:59 LOG4 send_obs_status: To obs_status: <1> LOOP 2 2009-Apr-20 19:59:59 LOG3 send_to_one_wapp: To WAPPCON: PROJECT a2010 Betsey Adams 2009-Apr-20 19:59:59 LOG3 send_to_one_wapp: To WAPPCON2: PROJECT a2010 Betsey Adams 2009-Apr-20 19:59:59 LOG3 send_to_one_wapp: To WAPPCON3: PROJECT a2010 Betsey Adams 2009-Apr-20 19:59:59 LOG3 send_to_one_wapp: To WAPPCON4: PROJECT a2010 Betsey Adams 2009-Apr-20 19:59:59 LOG4 send_obs_status: To obs_status: <1> INFO {Making drift scan followed by CAL} 2009-Apr-20 19:59:59 LOG4 take_data: Calling 'take_data 600 1 FIXEDAZ FIXEDAZ stat_drift {drift scan}' 2009-Apr-20 19:59:59 START begin_task: Starting task 'WAPP spectral observation' 2009-Apr-20 19:59:59 LOG5 begin_task: Level: (2) ID = <10224> Status = 0 0 0 0 ok 2009-Apr-20 19:59:59 LOG4 send_obs_status: To obs_status: <0> TASKWAIT BITMAP stat_busy MESSAGE {Waiting for drift scan ...} 2009-Apr-20 19:59:59 LOG5 log_alfabeam: Can't log alfabeam, not J2000 2009-Apr-20 19:59:59 INFO2 take_data: Starting WAPP 600-second scan: 911000225 2009-Apr-20 19:59:59 START begin_task: Starting task 'waiting on WAPP spectra' 2009-Apr-20 19:59:59 LOG5 begin_task: Level: (3) ID = <10225> Status = 0 0 0 0 ok 2009-Apr-20 19:59:59 LOG4 WAPP=1+2+3+4-wappcon: Received command 'PROJECT a2010 Betsey Adams' 2009-Apr-20 19:59:59 LOG4 WAPP=1+2+3+4-wappcon: Received a FITS-header block 2009-Apr-20 19:59:59 INFO1 WAPP=1+2+3+4-start_spectra: start sec -0.00 2009-Apr-20 19:59:59 LOG4 send_obs_status: To obs_status: <0> TASKTIME 600 BITMAP stat_drift MESSAGE {Taking drift scan ...} 2009-Apr-20 19:59:59 NOTE WAPPDATA-new_file: New FITS file: wapp.20090420.a2010.0018.fits 2009-Apr-20 19:59:59 LOG4 send_obs_status: To obs_status: <0> FILENAME {wapp.20090420.a2010.0018.fits} 2009-Apr-20 20:00:00 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.520 (still bad) 2009-Apr-20 20:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Up: 1635.000000 MHz --- rfnum = 17 ifnum = 6 inpfrq = 4 2009-Apr-20 20:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 1: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1725.500000 MHz 2009-Apr-20 20:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 2: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1748.500000 MHz 2009-Apr-20 20:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 3: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1771.500000 MHz 2009-Apr-20 20:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 4: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1794.500000 MHz 2009-Apr-20 20:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 5: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1795.000000 MHz 2009-Apr-20 20:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 6: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1845.000000 MHz 2009-Apr-20 20:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 7: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1895.000000 MHz 2009-Apr-20 20:00:01 LOG3 WAPP=1+2+3+4-save_rfcalc: Channel 8: Sky freq = 1385.000000 MHz Flip = 1 Band = 0 Mixer = 1945.000000 MHz 2009-Apr-20 20:00:02 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.080 (still bad) 2009-Apr-20 20:00:04 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.076 (still bad) 2009-Apr-20 20:00:06 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 20:00:08 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.076 (still bad) 2009-Apr-20 20:00:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 20:00:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 20:00:14 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.077 (still bad) 2009-Apr-20 20:00:16 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.078 (still bad) 2009-Apr-20 20:00:18 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.078 (still bad) 2009-Apr-20 20:00:20 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.077 (still bad) 2009-Apr-20 20:00:22 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.079 (still bad) 2009-Apr-20 20:00:24 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.086 (still bad) 2009-Apr-20 20:00:26 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.080 (still bad) 2009-Apr-20 20:00:28 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.080 (still bad) 2009-Apr-20 20:00:30 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.084 (still bad) 2009-Apr-20 20:00:32 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.082 (still bad) 2009-Apr-20 20:00:34 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.083 (still bad) 2009-Apr-20 20:00:36 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.088 (still bad) 2009-Apr-20 20:00:38 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.083 (still bad) 2009-Apr-20 20:00:40 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.082 (still bad) 2009-Apr-20 20:00:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.080 (still bad) 2009-Apr-20 20:00:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.079 (still bad) 2009-Apr-20 20:00:47 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.082 (still bad) 2009-Apr-20 20:00:49 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.081 (still bad) 2009-Apr-20 20:00:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.079 (still bad) 2009-Apr-20 20:00:53 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.105 < 0.75)! 2009-Apr-20 20:00:53 LOG4 check_wapp_levels: WAPP-1 power levels: 1.005 0.885 1.041 1.074 2009-Apr-20 20:00:53 LOG4 check_wapp_levels: WAPP-2 power levels: 1.001 0.955 1.079 0.901 2009-Apr-20 20:00:53 LOG4 check_wapp_levels: WAPP-3 power levels: 1.080 0.933 1.022 0.976 2009-Apr-20 20:00:53 LOG4 check_wapp_levels: WAPP-4 power levels: 0.891 0.105 0.981 0.129 2009-Apr-20 20:00:55 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 20:00:57 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.078 (still bad) 2009-Apr-20 20:00:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2009-Apr-20 20:01:01 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.078 (still bad) 2009-Apr-20 20:01:03 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.079 (still bad) 2009-Apr-20 20:01:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.086 (still bad) 2009-Apr-20 20:01:07 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.086 (still bad) 2009-Apr-20 20:01:09 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.090 (still bad) 2009-Apr-20 20:01:11 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.099 (still bad) 2009-Apr-20 20:01:13 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.092 (still bad) 2009-Apr-20 20:01:15 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.090 (still bad) 2009-Apr-20 20:01:17 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.090 (still bad) 2009-Apr-20 20:01:19 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.083 (still bad) 2009-Apr-20 20:01:21 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.081 (still bad) 2009-Apr-20 20:01:23 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2009-Apr-20 20:01:25 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.079 (still bad) 2009-Apr-20 20:01:27 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 20:01:29 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.085 (still bad) 2009-Apr-20 20:01:31 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.085 (still bad) 2009-Apr-20 20:01:33 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.087 (still bad) 2009-Apr-20 20:01:35 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.092 (still bad) 2009-Apr-20 20:01:37 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.084 (still bad) 2009-Apr-20 20:01:39 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.084 (still bad) 2009-Apr-20 20:01:41 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.085 (still bad) 2009-Apr-20 20:01:43 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.080 (still bad) 2009-Apr-20 20:01:45 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.080 (still bad) 2009-Apr-20 20:01:47 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2009-Apr-20 20:01:49 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 20:01:51 INFO5 check_wapp_levels: WAPP power levels are between 0.105 and 1.081 (still bad) 2009-Apr-20 20:01:53 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.085 (still bad) 2009-Apr-20 20:01:55 WARNING check_wapp_levels: WARNING there are WAPP channels with too little power (0.106 < 0.75)! 2009-Apr-20 20:01:55 LOG4 check_wapp_levels: WAPP-1 power levels: 0.999 0.882 1.038 1.068 2009-Apr-20 20:01:55 LOG4 check_wapp_levels: WAPP-2 power levels: 0.999 0.952 1.073 0.898 2009-Apr-20 20:01:55 LOG4 check_wapp_levels: WAPP-3 power levels: 1.082 0.932 1.028 0.986 2009-Apr-20 20:01:55 LOG4 check_wapp_levels: WAPP-4 power levels: 0.888 0.106 0.978 0.129 2009-Apr-20 20:01:57 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.083 (still bad) 2009-Apr-20 20:01:59 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.089 (still bad) 2009-Apr-20 20:02:01 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 20:02:03 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 20:02:05 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 20:02:07 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 20:02:10 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.077 (still bad) 2009-Apr-20 20:02:12 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.083 (still bad) 2009-Apr-20 20:02:14 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.080 (still bad) 2009-Apr-20 20:02:16 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.078 (still bad) 2009-Apr-20 20:02:18 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 20:02:20 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 20:02:22 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.081 (still bad) 2009-Apr-20 20:02:24 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.082 (still bad) 2009-Apr-20 20:02:26 INFO5 check_wapp_levels: WAPP power levels are between 0.106 and 1.079 (still bad) 2009-Apr-20 20:02